debian/0000775000000000000000000000000012257556102007175 5ustar debian/README.Debian0000664000000000000000000000043111634411765011237 0ustar Note: Due to a conflict with the tendra package, the pl tool for reading and writing property lists has been renamed plio in Debian. -- Hubert Chathi , Thu, 10 Apr 2008 16:11:44 -0400 See also /usr/share/doc/gnustep-common/README.Debian for additional notes. debian/source/0000775000000000000000000000000011756230201010465 5ustar debian/source/format0000664000000000000000000000001411756230201011673 0ustar 3.0 (quilt) debian/copyright0000664000000000000000000001032011756440462011130 0ustar This package was debianized by Gregor Hoffleit and Matthias Klose on Thu, 5 Nov 1998 17:18:55 +0100. The source for the package was taken from one of the source packages at ftp://ftp.gnustep.org/pub/gnustep/core/gnustep-base-X.Y.Z.tar.gz Upstream Authors: see the GNUstep Project Page at http://savannah.gnu.org/projects/gnustep Copyright © 2002-2012 Free Software Foundation, Inc. Copyright © 2009 Remy Demarest Copyright © David Chisnall License: The GNUstep libraries are covered under the GNU Lesser Public License. This means you can use these libraries in any program (even non-free programs). If you distribute the libraries along with your program, you must make the improvements you have made to the libraries freely available. This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA GNUstep tools, test programs, and other files are covered under the GNU General Public License. The GNU GPL is a free software license, which requires that all the released improved versions be free software as well. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA On Debian GNU/Linux systems, the complete text of version 3 of the GNU General Public License can be found in `/usr/share/common-licenses/GPL-3', and the latest version of the GNU General Public License can be found in `/usr/share/commot-licenses/GPL'. The complete text of version 2.1 of the GNU Lesser General Public License can be fouund in `/usr/share/common-licenses/LGPL-2.1', and the latest version can be found in `/usr/share/common-licenses/LGPL'. The ObjectiveC2 compatibility framework (Source/ObjectiveC2/*) is available under the following license (Note: Since it links statically with libgnustep-base, the library as a whole (i.e. the generated object code) is available under LGPLv2.1+; see above): Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. debian/gnustep-base-doc.doc-base.base0000664000000000000000000000113711634411765014652 0ustar Document: gnustep-base-reference Title: GNUstep Base Library API Reference Author: Richard Frith-Macdonald Abstract: The GNUstep Base library is a free software package implementing the API of the OpenStep Foundation Kit (tm), including later additions. This documentation package describes the core of the Base library, for documentation on additional classes, see the BaseAdditions documentation package. Section: Programming/Objective-C Format: HTML Index: /usr/share/GNUstep/Documentation/Developer/Base/Reference/index.html Files: /usr/share/GNUstep/Documentation/Developer/Base/Reference/*.html debian/make_strings.10000664000000000000000000000414011634411765011747 0ustar .TH make_strings 1 "August 16, 2009" "GNUstep" "GNUstep System Manual" .SH NAME make_strings \- tool to build lists of localizable strings from Objective-C files .SH SYNOPSIS .B make_strings .RB [ --help ] .RB [ --verbose ] .RB [ --aggresive-import ] .RB [ --aggressive-match ] .RB [ --aggressive-remove ] .RB [ -L .IR languages ] .I files.[hmc...] .br .SH DESCRIPTION .B make_strings parses Objective-C files and builds lists of localizable strings. It then creates new .I .strings files or merges the strings with existing .I .strings files. It's fairly intelligent when matching old and new strings, and produces .I .strings files that are (supposed to be) easy for a translator to work with. .PP .B make_strings accepts the following options: .SH OPTIONS .TP .B --help Prints a short list of available options. .TP .B --verbose Prints additional information while processing. .TP .BI -L " languages" Specify which languages to process. Multuple .B -L options are accepted, or multiple .I languages defined in one .B -L flag. .TP .B --aggressive-import Activates .B --aggresive-match and automatically removes "dummy" entries that are added by importing .I .strings files which were not created by .B make_strings program. This option is suitable when .B make_strings is run for the first time and there is an existing .I .strings file which contains a fairly accurate translation. .TP .B --aggressive-match This option will make .B make_strings assume that matching keys should have matching translations. This can save lots of work, but it increases the risk of erroneous translation. .TP .B --aggressive-remove Removes obsolete strings/keys. .SH EXAMPLES make_strings \-L "English Swedish Russian" *.[hm] .SH SEE ALSO .BR GNUstep (7). .SH AUTHORS .B make_strings was written Alexander Malmberg . .P This manual page was added by Yavor Doganov . .SH COPYRIGHT Copyright (C) 2009 Free Software Foundation, Inc. .P Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved. debian/gnustep-base-doc.doc-base.standards0000664000000000000000000000102711634411765015721 0ustar Document: gnustep-coding-standards Title: Coding Standards for GNUstep Libraries Author: Adam Fedor Abstract: This document explains the official coding standards which developers for GNUstep should follow. Note that these standards are an addition to the GNU Coding Standards, not a replacement of them. Section: Help/Standards Format: Info Index: /usr/share/info/gs-standards.info.gz Files: /usr/share/info/gs-standards.info*.gz Format: PDF Files: /usr/share/GNUstep/Documentation/Developer/CodingStandards/coding-standards.pdf debian/changelog0000664000000000000000000012731712257555700011065 0ustar gnustep-base (1.24.0-1ubuntu3) trusty; urgency=medium * Add chapter to coding-standards.texi to fix FTBFS. -- Dimitri John Ledkov Sat, 28 Dec 2013 14:10:08 +0000 gnustep-base (1.24.0-1ubuntu2) trusty; urgency=medium * No change rebuild against libicu52 -- Dimitri John Ledkov Sat, 28 Dec 2013 13:51:38 +0000 gnustep-base (1.24.0-1ubuntu1) raring; urgency=low * Backport upstream fix for recent libxml2. -- Benjamin Drung Wed, 21 Nov 2012 13:56:22 +0100 gnustep-base (1.24.0-1) experimental; urgency=low * New major upstream release: + Fixes FTBFS with GCC-4.7 (Closes: #667868). + Does not create empty ~/GNUstep directory by default (Closes: #643305). * debian/control.m4 (Build-Depends): Remove quilt. (libgnustep-base`'SOV_BASE-dbg) : Add libobjc4-dbg as alternative. : Add libgnustep-base1.22-dbg. (Standards-Version): Bump to 3.9.3; no changes needed. * debian/control: Regenerate. * debian/source/format: Switch to 3.0 (quilt). * debian/README.source: Delete; redundant. * debian/rules: Don't include /usr/share/quilt/quilt.make. Remove quilt patch/unpatch stuff. Don't bother messing with CC as it fails the configure test. Build with hardening enabled. * debian/patches/gnutls-deprecated.patch: Remove; fixed upstream. * debian/patches/kfreebsd-fake-main.patch: * debian/patches/avoid-nsl-linkage.patch: Refresh. * debian/patches/autoreconf.patch: Regenerate. * debian/patches/series: Update. * debian/gnustep-base-runtime.gdomap.in: Add LSB Description keyword. * debian/gnustep-base-runtime.lintian-overrides: New, override hardening false positives. * debian/copyright: Update copyright years. -- Yavor Doganov Mon, 21 May 2012 16:22:29 +0300 gnustep-base (1.22.1-2) unstable; urgency=low * debian/patches/kfreebsd-fake-main.patch: New; treat GNU/kFreeBSD as GS_FAKE_MAIN platform because programs with many arguments abort (Closes: #644868). * debian/patches/autoreconf.patch: Regenerate. * debian/patches/series: Update. * debian/gnustep-base-runtime.gdomap.in: Add support for the `status' action, thanks Peter Eisentraut (Closes: #646844). * debian/control.m4 (gnustep-base-runtime) : Add lsb-base. * debian/control: Regenerate. -- Yavor Doganov Thu, 03 Nov 2011 19:58:33 +0200 gnustep-base (1.22.1-1) unstable; urgency=low * New upstream release: + Fixes implicit declaration of function (Closes: #629216). * debian/rules (v_make): Set to 2.6.1. (install-common): Do not delete non-existent .swp file. * debian/control.m4 (Build-Depends): Remove gobjc; gnustep-make now depends on it. (libgnustep-base-dev) : Likewise. (Suggests): Remove; completely pointless. * debian/control: Regenerate. * debian/patches/avoid-nsl-linkage.patch: Refresh. * debian/patches/autoreconf.patch: Regenerate. -- Yavor Doganov Thu, 15 Sep 2011 12:31:15 +0300 gnustep-base (1.22.0-1) experimental; urgency=low * New major upstream release: + Includes support for the new Objective-C runtime (Closes: #624928). * debian/control.m4 (Vcs-Arch): Replace with... (Vcs-Git): ...since tla-buildpackage is gone. (Vcs-Browser): New field. (Standards-Version): Bump to 3.9.2; no changes needed. (Build-Depends): Add libicu-dev, needed for NSLocale. (libgnustep-base`'SOV_BASE-dbg) : Set to libgnustep-base1.20-dbg only. : Set to libobjc3-dbg. * debian/control: Regenerate. * debian/patches/gnutls-deprecated.patch: New; fix usage of deprecated GnuTLS function (Closes: #624054). * debian/patches/missing-header.patch: * debian/patches/no-march.patch: Delete; fixed upstream. * debian/patches/NSBundle-PROCFS_EXE_LINK.patch: Delete; apparently not needed anymore. * debian/patches/manpage-fixes.patch: A few more fixes. * debian/patches/avoid-nsl-linkage.patch: Refresh. * debian/patches/autoreconf.patch: Regenerate. * debian/patches/series: Update. * debian/rules (v_objc, v_make): Bump to 4:4.6 (for libobjc3) and 2.6 (for the sake of the testsuite) accordingly. (debian/build-shared-stamp): Run the testsuite. (install-shared): Do not delete non-existent .swp file. (install-common): Use $(sov_base) instead of hardcoded version. * debian/copyright: Update copyright years. -- Yavor Doganov Tue, 31 May 2011 11:03:16 +0300 gnustep-base (1.20.2-2) unstable; urgency=medium * debian/patches/missing-header.patch: New; install NSNetServices+GNUstepBase.h (Closes: #614480). * debian/patches/series: Update. -- Yavor Doganov Tue, 08 Mar 2011 18:47:59 +0200 gnustep-base (1.20.2-1) unstable; urgency=low * New upstream release. * debian/control.m4 (Build-Depends): Replace libavahi-compat-libdnssd-dev with libavahi-client-dev; NSNetServices has been rewritten to use Avahi natively (Closes: #588396). * debian/control: Regenerate. * debian/rules (binary-arch): Revert last change. * debian/patches/hppa-pthread-alignment.patch: Remove; present upstream. * debian/patches/avoid-nsl-linkage.patch: Refresh. * debian/patches/autoreconf.patch: Regenerate. * debian/patches/series: Update. -- Yavor Doganov Sun, 13 Feb 2011 12:06:09 +0200 gnustep-base (1.20.1-6) unstable; urgency=high * debian/rules (binary-arch): Pass -R to dh_installinit to facilitate upgrades from lenny (really closes: #605565). Thanks Axel Beckert and Julien Cristau. -- Yavor Doganov Wed, 29 Dec 2010 20:02:39 +0200 gnustep-base (1.20.1-5) unstable; urgency=high * debian/gnustep-base-runtime.gdomap.in: Pass --oknodo to start-stop-daemon; thanks Adam Borowski (Closes: #605565). -- Yavor Doganov Wed, 01 Dec 2010 19:00:25 +0200 gnustep-base (1.20.1-4) unstable; urgency=medium * debian/control.m4 (Build-Depends): Remove libkvm-dev; current GNU/kFreeBSD supports /proc and the HAVE_KVM_ENV code branch leads to aborts when programs are started with many arguments (Closes: #593898). Thanks to Axel Beckert for the report and testing. * debian/control: Regenerate. * debian/rules (KVM_ARCHS): Remove. (debian/control debian/control.tmp): Do not define the KVM_ARCHS macro. (debian/configure-stamp): Pass ac_cv_lib_kvm_kvm_getenvv=no to `configure' to ensure that the /proc implementation in NSProcessInfo is used even if libkvm-dev happens to be installed. -- Yavor Doganov Fri, 27 Aug 2010 21:05:22 +0300 gnustep-base (1.20.1-3) unstable; urgency=medium * debian/patches/hppa-pthread-alignment.patch: New; check for alignment of pthread types and align the opaque gs_* equivalents accordingly, making the library usable again on hppa (Closes: #592751). Thanks to dann frazier and Mehdi Dogguy for their tireless assistance, and to Carlos O'Donell for pointing out where the bug lies. * debian/patches/autoreconf.patch: Regenerate. * debian/patches/series: Update. -- Yavor Doganov Fri, 20 Aug 2010 09:36:47 +0300 gnustep-base (1.20.1-2) unstable; urgency=low * Upload to unstable. * debian/control.m4 (libgnustep-base`'SOV_BASE-dbg) : Add libgnustep-base1.16-dbg, libgnustep-base1.16-libffi-dbg, libgnustep-base1.19-dbg. (Standards-Version): Compliant with 3.9.1; no changes needed. * debian/control: Regenerate. -- Yavor Doganov Tue, 10 Aug 2010 14:02:25 +0300 gnustep-base (1.20.1-1) experimental; urgency=low * New upstream bugfix release: + Fixes whitespace handling in XML property lists (Closes: #583804). + Fixes FTBFS on GNU/kFreeBSD (Closes: #583825). * debian/patches/avoid-nsl-linkage.patch: Refresh. * debian/patches/autoreconf.patch: Regenerate. * debian/rules (LDFLAGS): Revert last change; gnustep_base_user_main is declared `weak' as of this release, so this should allow -Wl,--no-undefined. (install-common): Delete a useless backup file. * debian/watch: Track only stable releases. -- Yavor Doganov Mon, 21 Jun 2010 19:57:31 +0300 gnustep-base (1.20.0-1) experimental; urgency=low * New major upstream release. * debian/control.m4 (Description): Don't praise the OpenStep API. (libgnustep-base`'SOV_BASE-dbg): Recommend libobjc2-dbg. * debian/control: Regenerate, which automatically reflects the SONAME change as well. * debian/rules (OPTFLAG): Remove and rework `noopt' handling to be compatible with gnustep-make/2.4.x. * debian/patches/powerpc-asm-local-labels.patch: * debian/patches/gdomap-bug29755.patch: Remove; already present upstream. * debian/patches/no-march.patch: New; avoid passing -march=i686 to GCC as Debian's minimum supported x86 CPU is i486. * debian/patches/autoreconf.patch: Regenerate. * Refresh all other patches. * debian/patches/series: Update. * debian/gnustep-base-runtime.postinst.in: Remove the override for /usr/lib/GNUstep/System/Tools/gdomap if it exists; apparently some systems still have it as it was not properly cleaned up during the gnustep-make 1.x -> 2.x transition. * debian/source.lintian-overrides: New file; override debian-rules-calls-debhelper-in-odd-order as it is entirely legitimate in our case. * debian/copyright: Add new copyright holders and bump copyright years. Add license for the ObjectiveC2 framework, and clarify that the library as a whole remains under LGPLv2.1+. -- Yavor Doganov Tue, 18 May 2010 11:03:40 +0300 gnustep-base (1.19.3-3) unstable; urgency=low * debian/patches/powerpc-asm-local-labels.patch: New; should fix FTBFS on powerpc with GCC 4.4 and above. * debian/patches/series: Update. * debian/rules (LDFLAGS): Conditionally define to avoid FTBFS on GNU/Hurd. -- Yavor Doganov Mon, 10 May 2010 14:10:50 +0300 gnustep-base (1.19.3-2) unstable; urgency=high * debian/control.m4: Wrap all fields for diff-friendliness. (Uploaders): Add myself, remove Hubert. (Section): Change to `gnustep' to match the override file. (Standards-Version): Claim compliance to 3.8.4 as of this release. (Build-Depends): Drop obsolete version requirement of libffi-dev. Add quilt. (gnustep-base-common)
: Remove. (gnustep-base-runtime)
: Likewise. : Extend short description. : Remove; obsolete. (libgnustep-base`'SOV_BASE) : Likewise. (libgnustep-base-dev): : Likewise. : Remove ${shlibs:Depends}. (libgnustep-base`'SOV_BASE-dbg)
: Change to `debug'. : Remove; not needed. : Remove ${shlibs:Depends}. (gnustep-base-examples) : Likewise. (gnustep-base-doc) : Remove. : Replace the runtime library with the -dev package. : Add ${misc:Depends} and dpkg (>= 1.15.4) | install-info as per Policy 12.2. : Extend. (Homepage, Vcs-Arch): New fields. * debian/control: Regenerate. * debian/rules: Do not invoke dh_installdirs without arguments. Include /usr/share/GNUstep/debian/config.mk, /usr/share/quilt/quilt.make and adjust the rules accordingly. Do not use gs_make. (LDFLAGS): Define to -Wl,-z,defs -Wl,--as-needed. (OPTFLAG): Define conditionally based on the presence of `noopt' in DEB_BUILD_OPTIONS. (debian/build-shared-stamp, debian/build-static-stamp): Use it. (debian/configure-stamp): Pass LDFLAGS and --disable-bfd (Addresses: #528005). (debian/libgnustep-base$(sov_base).lintian-overrides): New rule to generate automatically a lintian override file. (clean_files): Add debian/libgnustep-base$(sov_base).lintian-overrides. (install-doc): Rename the Info manuals to be less ambiguous. (binary-arch): Add debian/libgnustep-base$(sov_base).lintian-overrides to prerequisites. Invoke dh_lintian. Install the newly added manual pages. * debian/patches/pldes-manpage-rename.patch: * debian/patches/NSBundle-PROCFS_EXE_LINK.patch: Add, extracted from the diff.gz. * debian/patches/avoid-tools-extra-linkage.patch: New, avoid linking the tools against all the external libraries that gnustep-base depends upon. * debian/patches/avoid-nsl-linkage.patch: New, use AC_SEARCH_LIBS instead of AC_CHECK_LIB to avoid useless linking against libnsl. * debian/patches/autoreconf.patch: New. * debian/patches/manpage-fixes.patch: New, fix some errors from man. * debian/patches/info-direntry.patch: New, use appropriate @dircategory and @direntry for the Info manuals. * debian/patches/gdomap-bug29755.patch: New, fix for some severe security issues; taken from upstream SVN (CVE-2010-1457, CVE-2010-1620). * debian/patches/series: * debian/source/format: * debian/README.source: New file. * debian/watch: Pass opts=pasv; don't uupdate. * debian/libgnustep-baseN.overrides.m4: New file, a template for the lintian overrides. * debian/gnustep-base-doc.doc-base.base: * debian/gnustep-base-doc.doc-base.additions: * debian/gnustep-base-doc.doc-base.tools: * debian/gnustep-base-doc.doc-base.manual: * debian/gnustep-base-doc.doc-base.standards: New files. * debian/gnustep-base-runtime.gdomap.in: Don't test for the presence of GNUstep.sh and do not source it -- the file is no longer executable, so this causes the init script to exit prematurely (Closes: #560740). * debian/gnustep-base-runtime.postinst.in: Make sure gdomap is not installed setuid root. Remove obsolete code for gdnc and /var/run/GNUstep. * debian/HTMLLinker.1: * debian/make_strings.1: New manpages. * debian/copyright: Indicate that the daemons/tools are under GPLv3+ now. Update copyright years. -- Yavor Doganov Thu, 06 May 2010 10:25:31 +0300 gnustep-base (1.19.3-1) unstable; urgency=low * New upstream version. * Bump standards version. -- Gürkan Sengün Wed, 18 Nov 2009 12:59:52 +0100 gnustep-base (1.19.0-2) unstable; urgency=low * Upload to unstable. -- Hubert Chathi Sat, 11 Apr 2009 13:30:33 -0400 gnustep-base (1.19.0-1) experimental; urgency=low [Gürkan Sengün] * New upstream version. * Bump standards version. * Bump debhelper version. * Add myself to Uploaders field. [Hubert Chathi] * Don't use ffcall any more; only build using libffi. * Bump required gnustep-make versions. * Force installation to system domain. * Target to experimental distribution. -- Gürkan Sengün Fri, 20 Feb 2009 17:25:20 +0100 gnustep-base (1.16.3-3) unstable; urgency=low * debian/rules: Use the right variable for the info document directory. (Thanks to Yavor.) (Closes: #489279) -- Hubert Chathi Fri, 08 Aug 2008 14:19:00 -0400 gnustep-base (1.16.3-2) unstable; urgency=low * debian/rules: Don't build against libffi on non-libffi packages. -- Hubert Chathi Sat, 19 Jul 2008 11:36:33 -0400 gnustep-base (1.16.3-1) unstable; urgency=low * New upstream release. -- Hubert Chathi Thu, 17 Jul 2008 15:14:56 -0400 gnustep-base (1.16.1-3) unstable; urgency=low * debian/control: Build-depend against texlive-base, texlive-latex-base instead of texlive-base-bin. -- Hubert Chathi Fri, 04 Jul 2008 18:46:35 -0400 gnustep-base (1.16.1-2) unstable; urgency=low * Upload to unstable. -- Hubert Chathi Wed, 02 Jul 2008 12:02:59 -0400 gnustep-base (1.16.1-1) experimental; urgency=low * New upstream release. -- Hubert Chathi Fri, 20 Jun 2008 10:28:32 -0400 gnustep-base (1.16.0-1) experimental; urgency=low * New upstream version. (Closes: #467583) * debian/control, debian/rules: Build against libgnutls instead of libssl. * No longer builds SSL bundle. (Closes: #479074) * debian/control: Build against libavahi. * debian/control: Add dependencies on ${gnustep:Depends}. * debian/control: Tweak dependencies for lib-dbg packages. -- Hubert Chathi Sun, 15 Jun 2008 18:50:11 -0400 gnustep-base (1.14.1-8) unstable; urgency=low * debian/control: Build-Depend on a recent version of libffi-dev -- older versions seem to be failing. * debian/rules: Calculate libgnustep-base's shlibs dependency separately to avoid dependency on gnustep-base-runtime. (Closes: #478757) -- Hubert Chathi Wed, 30 Apr 2008 17:31:30 -0400 gnustep-base (1.14.1-7) unstable; urgency=low * debian/README.Debian: Remove obsolete information. -- Hubert Chathi Thu, 10 Apr 2008 16:12:22 -0400 gnustep-base (1.14.1-6) unstable; urgency=low * debian/control: s/libffi4-dev/libffi-dev/ (Closes: #472150) -- Hubert Chathi Tue, 01 Apr 2008 09:50:15 -0400 gnustep-base (1.14.1-5) unstable; urgency=low * Upload to unstable. * Source/NSMessagePortNameServer.m: Add upstream patch to use locks to prevent interference between processes. (closes: #463416) -- Hubert Chathi Thu, 13 Mar 2008 15:20:57 -0400 gnustep-base (1.14.1-4) experimental; urgency=low * debian/copyright: Add copyright info, update note about common-licenses to point to specific the version of the license as well as the latest version. * debian/gnustep-base-runtime.gdomap.in: Add LSB init information, as provided by Petter Reinholdtsen. (closes: #460224) * debian/control, debian/rules: Add debugging package. (closes: #468125) * debian/rules (binary-arch): Remove call to strip. (dh_strip should be sufficient) * debian/control, debian/compat: Debhelper compatibility level 5. * debian/control (Standards-Version): Bump to 3.7.3. * debian/rules: SSL bundle should be in library package, instead of runtime. * Compile both ffcall and libffi versions of the library, if supported by the architecture. * debian/rules: Compile both ffcall and libffi versions; install ffcall version by default, install libffi version in libgnustep-base-ffi, change debhelper calls from "-a" to "-s" where necessary. * debian/control: Add new packages libgnustep-base-ffi and libgnustep-base-ffi-dbg that contain the libffi versions. * debian/libgnustep-base-ffi*: Divert non-ffi versions of library. * debian/libgnustep-base-ffi.override.in: Override lintian warnings about normal library stuff (these things are handled in libgnustep-base instead). * debian/rules, debian/gnustep-base-common.xmlcatalogs.in: Fix registering with xml-core. * debian/control (libgnustep-base-dev): Change some Depends: to Suggests: (only needed for static linking). -- Hubert Chathi Sat, 08 Mar 2008 14:40:38 -0500 gnustep-base (1.14.1-3) experimental; urgency=low * debian/control, debian/rules, debian/README.Debian: use libffi for all architectures instead of ffcall. Not being able to run on machines with security features enabled doesn't give Hubert a warm fuzzy feeling. (closes: #453242) (but make it reasonably easy to recompile with ffcall, if wanted) * Tools/gdomap.h: patch to use the correct mask for UDP. (patch by Philippe Roussel) -- Hubert Chathi Tue, 11 Dec 2007 21:21:45 -0500 gnustep-base (1.14.1-2) unstable; urgency=low * debian/control: Make sure that debian/control doesn't change on ffcall architectures. -- Hubert Chathi Fri, 23 Nov 2007 18:07:43 -0500 gnustep-base (1.14.1-1) unstable; urgency=low * New upstream release. * debian/rules: remove .../NSTimeZones/.README.swp * debian/rules debian/control:Use libffi for arm, since ffcall is officially "untested" on arm. (closes: #449163) * debian/control: Use source:Version and binary:Version instead of deprecated Source-Version, plus other cleanups and fixes. -- Hubert Chathi Wed, 21 Nov 2007 16:25:14 -0500 gnustep-base (1.14.0-2) unstable; urgency=low * Upload to unstable. -- Hubert Chathi Wed, 3 Oct 2007 17:16:39 -0400 gnustep-base (1.14.0-1) experimental; urgency=low * New upstream release. * Don't use /proc//exe link, as it is broken on the LiveCD. * Update build-depends for texlive. * Register DTDs with xml-core. * Remove duplicated information from README.Debian. -- Hubert Chan Thu, 28 Jun 2007 18:28:03 -0400 gnustep-base (1.13.0-7) unstable; urgency=low * Revert conflict: with tendra; rename pl binary to plio, as per Section 10.1 of Policy. (really closes: #402558) -- Hubert Chan Tue, 12 Dec 2006 13:31:22 -0500 gnustep-base (1.13.0-6) unstable; urgency=low * gnustep-base-runtime: Conflict: with tendra, since they both contain the pl binary and manpage. (Closes: #402558) -- Hubert Chan Mon, 11 Dec 2006 16:33:09 -0500 gnustep-base (1.13.0-5) unstable; urgency=low * Remove obsolete dependency on timezoneconf. (Closes: #397423) * Add tool symlinks and manpage symlinks for various tools. -- Hubert Chan Tue, 7 Nov 2006 22:46:31 -0500 gnustep-base (1.13.0-4) unstable; urgency=low * New maintainer address. * Move /etc/init.d/gdomap to gnustep-base-runtime (thanks to Yavor for spotting this). * Remove unnecessary conflicts with old libgnustep-gui. -- Hubert Chan Tue, 17 Oct 2006 22:53:01 -0400 gnustep-base (1.13.0-3) unstable; urgency=low * Provide: the right -dev package name this time. -- Hubert Chan Wed, 27 Sep 2006 13:17:19 -0400 gnustep-base (1.13.0-2) unstable; urgency=low * Provide: old -dev package name, to allow binNMUs of GNUstep packages. * Fix /usr/lib/debug/libgnustep-base.so symlink. -- Hubert Chan Mon, 25 Sep 2006 18:33:35 -0400 gnustep-base (1.13.0-1) unstable; urgency=low * New upstream release. * Minor improvements to debian/control generation. -- Hubert Chan Mon, 28 Aug 2006 16:26:03 -0600 gnustep-base (1.12.0-1) experimental; urgency=low * New upstream version. * Improved rules file. * Drop SONAME from -dev package instead of bumping it to new SONAME, as that is what ftpmaster seems to prefer now. * Fix -dbg package to behave like other -dbg packages and put the libraries in /usr/lib/debug. * Sync kfreebsd-amd64 Build-Depends: with kfreebsd-i386. (Closes: #361461) * Change priority of -dbg package to extra, to agree with override file. * Get rid of circular dependency. (Closes: #359158) - Split off -runtime package from -common to contain all needed runtime support binaries. - -common now only contains data files and is now Arch: all. - Add -runtime to shlibs file, so that all programs that compile against this library will depend on it. * Bump standards version to 3.7.2 (no changes). * Move base.make to -dev package since it's only needed for development. * Add license headers to copyright file. -- Hubert Chan Mon, 14 Aug 2006 20:21:23 -0600 gnustep-base (1.11.2-3) unstable; urgency=low * Fix check for word-aligned shorts/ints. (Closes: #362192) -- Hubert Chan Sat, 22 Apr 2006 15:59:19 -0600 gnustep-base (1.11.2-2) unstable; urgency=low * Fix typo in NSTimeZones/localtime symlink. -- Hubert Chan Mon, 2 Jan 2006 16:29:50 -0700 gnustep-base (1.11.2-1) unstable; urgency=low [ Hubert Chan ] * New upstream release. [ Christoph Berg ] * Point gdomap symlink to /usr/sbin. -- Christoph Berg Thu, 29 Dec 2005 18:14:22 +0100 gnustep-base (1.11.1-1) unstable; urgency=low * New upstream release. * Build with new gnustep-make. * Remove unneeded lintian and linda overrides. * Remove temporary files from an old build. -- Hubert Chan Mon, 12 Dec 2005 20:32:34 -0500 gnustep-base (1.10.3-2) unstable; urgency=low * Rebuild using gcc/gobjc 4.0. * debian/control.m4: - Bump Standards-Version to 3.6.2.1. - Clean Replaces and Conflicts fields. - As recommended by Adam Fedor and Fred Kiefer, add libgmp3-dev in Build-Conflicts field (closes: #321495). * debian/rules: - add ppc64 to FFCALL_ARCHS (closes: #324105). - add hurd-i386 in the FFCALL_ARCHS (closes: #309073). * Source/mframe.m: - Use latest CVS version to avoid ICE on all architectures. -- Eric Heintzmann Sat, 27 Aug 2005 00:16:24 +0200 gnustep-base (1.10.3-1) unstable; urgency=low * New upstream release. -- Eric Heintzmann Sun, 17 Apr 2005 00:14:38 +0200 gnustep-base (1.10.2-1) unstable; urgency=low * New upstream release. * Add *BSD support (closes: #267889). * .README.swp removed (closes: #285460). Thanks to Robert Millan. * Overrides inappropriate linda warnings. -- Eric Heintzmann Sat, 2 Apr 2005 11:32:30 +0200 gnustep-base (1.10.1-3) unstable; urgency=low * Build-depend on ffcall-dev on all architectures, drop build dependency on libffi2-dev. -- Matthias Klose Tue, 29 Mar 2005 00:43:33 +0200 gnustep-base (1.10.1-2) unstable; urgency=low * Upload in unstable. -- Eric Heintzmann Thu, 4 Nov 2004 20:14:51 +0100 gnustep-base (1.10.1-1) experimental; urgency=low * New upstream release. * Upload in experimental. -- Eric Heintzmann Sat, 30 Oct 2004 18:23:41 +0200 gnustep-base (1.10.0-1) unstable; urgency=low * New upstream release. * debian/control.m4: - Remove empty transitionnal package gnustep-base1. - Bump Standards-Version to 3.6.1.1. * SONAME has changed, thus lib packages has been renamed: - libgnustep-base1 -> libnustep-base1.10 - libgnustep-base1-dev -> libnustep-base1.10-dev - libgnustep-base1-dbg -> libnustep-base1.10-dbg * As recommended by Adam Fedor and Fred Kiefer, remove GMP dependencies. -- Eric Heintzmann Mon, 25 Oct 2004 20:26:35 +0200 gnustep-base (1.9.2-6) unstable; urgency=medium * Sources/NSTimeZones.m : apply NSTimeZone stucture packing patch from CVS (avoid Core dump on arm). * debian/control.m4: -libgnustep-base1 now depends on gnustep-base-common (>= {Source:Version}) and not (= {Source:Version}) (needed if we want to install multiple version of shared lib). -Add {shlibs:Depends} and {misc:Depends} in libgnustep-base1-dbg Depends field. -libgnustep-base1-dev now depends on libxslt1-dev and libssl-dev. * Regenerate debian/control file: add amd64 in Build-Depends (closes: #247141). -- Eric Heintzmann Sat, 10 Jul 2004 17:33:06 +0200 gnustep-base (1.9.2-5) unstable; urgency=low * Add build-indep dependency on tetex-bin (closes: #257801). * Add amd64 support (addresses: #247141). -- Matthias Klose Tue, 6 Jul 2004 07:26:39 +0200 gnustep-base (1.9.2-4) unstable; urgency=low * Tighten build dependency on ffcall. -- Matthias Klose Sat, 3 Jul 2004 06:46:37 +0200 gnustep-base (1.9.2-3) unstable; urgency=low * Fix symbolic link to shared library. -- Matthias Klose Mon, 28 Jun 2004 07:11:06 +0200 gnustep-base (1.9.2-2) unstable; urgency=low * Provide wrapper scripts for GNUstep tools (closes: #256147). -- Matthias Klose Fri, 25 Jun 2004 21:39:41 +0200 gnustep-base (1.9.2-1) unstable; urgency=low * New upstream release. * debian/control.m4: -Update Debian GNUstep maintainers e-mail -New build-dependancy: libxslt1-dev * Sources/NSUserDefaults.m: Apply Richard Frith-Macdonald's patch from CVS (allow to build all the documentation). * New Packaging scheme. Apply all recommendations of the Debian Library Packaging Guide: - gnustep-base1 is now an empty transitional package. - gnustep-base1-dev has been renamed in libgnustep-base1-dev. - gnustep-base1-dbg has been renamed in libgnustep-base1-dbg. - new gnustep-base-common package (common files). - new libgnustep-base1 package (shared library). -- Eric Heintzmann Mon, 14 Jun 2004 19:33:29 +0200 gnustep-base (1.9.1-2) unstable; urgency=low * debian/rules: Update CC. * Source/NSUserDefaults: apply patch from CVS. -- Eric Heintzmann Tue, 6 Apr 2004 15:21:11 +0200 gnustep-base (1.9.1-1) unstable; urgency=low * New upstream release. -- Eric Heintzmann Sun, 14 Mar 2004 20:16:48 +0100 gnustep-base (1.9.0-4) unstable; urgency=low * Use Source/simple-load.h from CVS: resolves problems when loading frameworks. -- Eric Heintzmann Mon, 16 Feb 2004 22:42:37 +0100 gnustep-base (1.9.0-3) unstable; urgency=low * Build-Depend on ffcall1-dev on mips (closes: #229844). -- Matthias Klose Thu, 29 Jan 2004 00:08:53 +0100 gnustep-base (1.9.0-2) unstable; urgency=low * Add conflict with gnustep-gui 0.9.0. -- Eric Heintzmann Fri, 19 Dec 2003 19:39:16 +0100 gnustep-base (1.9.0-1) unstable; urgency=low * New upstream release. -- Eric Heintzmann Sat, 13 Dec 2003 23:45:29 +0100 gnustep-base (1.8.0-2) unstable; urgency=medium * Make libffcall-dev/libffi-dev build dependencies more strict. -- Matthias Klose Mon, 6 Oct 2003 21:44:11 +0200 gnustep-base (1.8.0-1) unstable; urgency=low * New upstream release. * gnustep-base1 now depends on timezoneconf (closes: #213157). -- Eric Heintzmann Tue, 30 Sep 2003 12:21:41 +0200 gnustep-base (1.7.3-2) unstable; urgency=low * Do not start gdnc at boot time. * Update debian/README.Debian file. -- Eric Heintzmann Wed, 24 Sep 2003 17:52:10 +0200 gnustep-base (1.7.3-1) unstable; urgency=low * New upstream release. * Update to standard version 3.6.1. * debian/control file : update Conflicts fields. -- Eric Heintzmann Tue, 26 Aug 2003 17:03:07 +0200 gnustep-base (1.7.2-2) unstable; urgency=low * New Co-Maintainer. * Update to standard version 3.6.0. * Patch Tools/gdnc.m (properly daemonize gdnc). * Add "-V" option to dh_makeshlibs. -- Eric Heintzmann Fri, 22 Aug 2003 23:26:55 +0200 gnustep-base (1.7.2-1) unstable; urgency=low * New upstream release. * Update debian/rules to use flattened directory structure : remove GS_HOST, GS_CPU, GS_OS, GS_LIB_DIR, GS_COMBO_DIR variables. * Install new gdnc manpage (closes: #166368). -- Eric Heintzmann Thu, 24 Jul 2003 18:33:29 +0200 gnustep-base (1.7.1-6) unstable; urgency=low * Add m4 to the build dependencies (the autoconf build dependency was removed in 1.7.1-1 without adding the m4 dependency). -- Matthias Klose Wed, 23 Jul 2003 11:05:32 +0200 gnustep-base (1.7.1-5) unstable; urgency=low * Fix check to detect procfs support. -- Matthias Klose Wed, 23 Jul 2003 07:47:10 +0200 gnustep-base (1.7.1-4) unstable; urgency=low * Add zlib1g-dev to build dependencies (closes: #202279). * Fix typo in extracting the CC used in gnustep-make. * Turn on verbose build. -- Matthias Klose Tue, 22 Jul 2003 08:48:33 +0200 gnustep-base (1.7.1-3) unstable; urgency=low * Don't depend build target on build-indep target. -- Matthias Klose Fri, 18 Jul 2003 06:44:47 +0200 gnustep-base (1.7.1-2) unstable; urgency=low * Updates to the build system. -- Matthias Klose Wed, 16 Jul 2003 00:15:03 +0200 gnustep-base (1.7.1-1) unstable; urgency=low * New upstream release. * Update to standard version 3.5.10. * Update to debhelper compatibility level 4. * New gnustep-base-doc package (closes: #148030). * Use gcc/gobjc 3.3. * Fix lintian warnings and errors. * Update README.Debian file. * Update copyright file. * Update Descriptions field in debian/control ( using descriptions found in .spec files ). * Update gdomap and gdnc init scripts. * Do not use dh_doclink any longer. * New gdomap manpage. * Add debian/watch file. -- Eric Heintzmann Tue, 17 Jun 2003 18:56:09 +0200 gnustep-base (1.6.0-2) unstable; urgency=low * Correct CPU string on arm. -- Matthias Klose Fri, 21 Mar 2003 07:51:57 +0100 gnustep-base (1.6.0-1) unstable; urgency=low * New upstream release. -- Matthias Klose Thu, 20 Mar 2003 22:57:53 +0100 gnustep-base (1.5.90-1) unstable; urgency=low * Snapshot taken from the freeze-1_6_0 branch (CVS 20030303). -- Matthias Klose Tue, 4 Mar 2003 00:31:39 +0100 gnustep-base (1.5.2-2) unstable; urgency=low * Add GNU_TYPE in configure. -- Matthias Klose Sat, 1 Mar 2003 14:05:19 +0100 gnustep-base (1.5.2-1) unstable; urgency=low * New upstream release. * Correctly stop gdnc process in init script (closes: #180728). -- Matthias Klose Sat, 22 Feb 2003 18:52:29 +0100 gnustep-base (1.5.1-1) unstable; urgency=low * New upstream release. -- Matthias Klose Sun, 19 Jan 2003 10:10:10 +0100 gnustep-base (1.5.0-1) unstable; urgency=low * New upstream release. -- Matthias Klose Sun, 8 Sep 2002 13:30:21 +0200 gnustep-base (1.4.0-1) unstable; urgency=low * New upstream version. -- Matthias Klose Wed, 31 Jul 2002 00:11:23 +0200 gnustep-base (1.3.4-2) unstable; urgency=medium * Fix gobjc dependency on m68k (closes: #153975). -- Matthias Klose Wed, 24 Jul 2002 00:12:09 +0200 gnustep-base (1.3.4-1) unstable; urgency=low * New upstream release. * Add conflict to gnustep-ssl (closes: #152422). * Call ldconfig in postinst (closes: #151975). -- Matthias Klose Sun, 14 Jul 2002 21:05:43 +0200 gnustep-base (1.3.2-3) unstable; urgency=low * Use gcc-3.1 except on m68k (gcc-3.0). * gobjc-3.0 ICE is fixed in gobjc-3.1 on hppa (closes: #145910). -- Matthias Klose Sat, 1 Jun 2002 00:19:23 +0200 gnustep-base (1.3.2-2) unstable; urgency=low * Use libffcall for arm and hppa as well (closes: #145910, #147622). -- Matthias Klose Fri, 24 May 2002 00:48:14 +0200 gnustep-base (1.3.2-1) unstable; urgency=low * New upstream version. * Experimental: Configure gnustep-base with --enable-libffi on architectures, which don't have ffcall (alpha, arm, ia64). * Add gdnc init script. -- Matthias Klose Sat, 4 May 2002 14:56:19 +0200 gnustep-base (1.3.0-4) unstable; urgency=low * Enable building the SSL bundle (the SSL bundle code is licensed under the LGPL). -- Matthias Klose Wed, 1 May 2002 15:50:16 +0200 gnustep-base (1.3.0-3) unstable; urgency=high * gdomap: Close stderr after forking (closes: #140077). The buildd did hang, when installing the package. Therefore, urgency=high. -- Matthias Klose Sun, 31 Mar 2002 08:11:32 +0200 gnustep-base (1.3.0-2) unstable; urgency=low * Configure SSL directory as well. -- Matthias Klose Mon, 18 Mar 2002 00:37:20 +0100 gnustep-base (1.3.0-1) unstable; urgency=low * New upstream version. * Suggests gnustep-ssl package (containing the SSL bundle). * Refer to /etc/init.d/gdomap in README.Debian (closes: #135931). * /etc/default/gdomap: New file sourced by /etc/init.d/gdomap. -- Matthias Klose Fri, 15 Mar 2002 22:55:02 +0100 gnustep-base (1.1.0-3) unstable; urgency=high * gdomap: Close open files after forking, use syslog (closes: #135390). The buildd did hang, when installing the package. Therefore, urgency=high. -- Matthias Klose Tue, 26 Feb 2002 08:05:40 +0100 gnustep-base (1.1.0-2) unstable; urgency=low * Fix zoneinfo symlink (closes: #129482). -- Matthias Klose Wed, 16 Jan 2002 21:24:44 +0100 gnustep-base (1.1.0-1) unstable; urgency=low * New upstream version. * configure with --disable-openssl. -- Matthias Klose Wed, 9 Jan 2002 23:18:04 +0100 gnustep-base (1.0.2-2) unstable; urgency=low * Correctly determine s390 architecture. * Build-Depend on gnustep-base (>= 1.2.0-2) on architecture s390. -- Matthias Klose Wed, 9 Jan 2002 02:24:07 +0100 gnustep-base (1.0.2-1) unstable; urgency=low * Tighten dependency on gnustep-make (>= 1.2.0-1). -- Matthias Klose Mon, 31 Dec 2001 03:07:06 +0100 gnustep-base (1.0.2-0.5) unstable; urgency=low * Tighten dependency on gnustep-make (>= 1.2). -- Matthias Klose Sun, 9 Dec 2001 11:18:01 +0100 gnustep-base (1.0.2-0.4) unstable; urgency=low * Lower 'Depends' to 'Recommends' in gnustep-base-examples (closes: #107940, #112484). -- Matthias Klose Sat, 22 Sep 2001 10:14:36 +0200 gnustep-base (1.0.2-0.3) unstable; urgency=low * Add dependency on gobjc-3.0 (closes: #109779). -- Matthias Klose Sat, 25 Aug 2001 10:45:24 +0200 gnustep-base (1.0.2-0.2) unstable; urgency=low * gstep-core isn't part of woody anymore. Replaced by the component packages (closes: #67701, #81482, #84609, #87362) * gnustep uses gcc-3.0, gnustep-objc removed from woody (closes: #87968, #106785) * build error on alpha with gcc-2.95 (closes: #88146). * fixed gnustep-base-examples link (closes: #69789). * call dpkg-statoverride only, if not yet registered (closes: #88720). * debian/control.m4: Add Uploaders field. * Fixed dependency error on libxml (closes: #93356). * gnustep-base doesn't add a line to ld.so.conf anymore, gstep-base0 isn't in the dist anymore (closes: #77360). -- Matthias Klose Sun, 19 Aug 2001 11:03:11 +0200 gnustep-base (1.0.2-0.1) unstable; urgency=low * New upstream release. * Use Standards-Version: 3.5.5. -- Chanop Silpa-Anan Fri, 6 Jul 2001 22:39:48 +1000 gnustep-base (0.9.1.010302-1) unstable; urgency=low * New maintainer. * New CVS version. * Various small fixes. -- Kai Henningsen Sat, 3 Mar 2001 01:14:35 +0100 gnustep-base (0.9.1.010224-1) unstable; urgency=low * New snapshot from CVS. * Each library gets its own source package. -- Matthias Klose Sun, 4 Feb 2001 20:40:07 +0100 gstep-core (0.6.6-0.1) unstable; urgency=low * New upstream version. * debian/control.in: Update build dpendencies. -- Matthias Klose Thu, 20 Jul 2000 21:02:28 +0200 gstep-core (0.6.5-3) frozen unstable; urgency=low * base/Source/NSInvocation.m: Fix important build error on alpha #59373. * Set GNUSTEP_SYSTEM_ROOT to /usr/lib/GNUstep and disable separate system root. Needed to correctly build gstep-extensions and gstep-guile. * debian/gstep-base.init.in: Fix typo (fixes #59423). * debian/gstep-base.postrm: Remove directory in ld.so.conf inserted in postinst (fixes #59424). -- Matthias Klose Wed, 1 Mar 2000 21:33:53 +0100 gstep-core (0.6.5-2) frozen unstable; urgency=medium * Updated to the current state of the CVS. Integrates the Debian patches submitted upstream. * debian/gstep-base.init.d: Use new gdomap option -p for not probing machines on the local network (really fixes grave #55906). * debian/README.Debian: Document gdomap configuration. * debian/control.in: Add autoconf to Build-Depends (fixes i#58873). -- Matthias Klose Sun, 27 Feb 2000 22:31:00 +0100 gstep-core (0.6.5-1) frozen unstable; urgency=medium * Final release. * Don't probe machines on the local network (grave #55906). * Stop gdomap daemon (#48796). * /etc/GNUstep: directory for GNUstep configuration files. * debian/control.in: Add build depends. -- Matthias Klose Sat, 19 Feb 2000 10:09:19 +0100 gstep-core (0.6.0.90-1) unstable; urgency=low * New snapshot from CVS (1999-10-28). -- Matthias Klose Thu, 28 Oct 1999 21:04:46 +0200 gstep-core (0.6.0-1) unstable; urgency=low * New upstream release. * debian/gstep-base.init: Change init script message (fixes #40339). * debian/gstep-xgps.{preinst,postrm}: Divert gpbs (fixes #40976). * debian/gstep-base.init.in: Don't source GNUstep.sh (fixes #40338). * debian/control.in: Use versioned package names for libraries. -- Matthias Klose Sat, 21 Aug 1999 20:41:37 +0200 gstep-core (0.5.5.990625-1) unstable; urgency=low * New snapshot. -- Matthias Klose Fri, 25 Jun 1999 22:24:56 +0200 gstep-core (0.5.5.990508-1) unstable; urgency=low * New snapshot. Built with xgps as backend. -- Matthias Klose Sun, 9 May 1999 15:18:28 +0200 gstep-core (0.5.5.990310-1) unstable; urgency=low * GNUstep 0.5.5 + minor updates from the CVS archive. -- Matthias Klose Thu, 11 Mar 1999 22:47:17 +0100 gstep-core (0.5.5-1) unstable; urgency=low * gstep-0.6 prerelease2 ("dawn"). * gstep-extensions, gstep-db and gstep-guile are moved out of the core package. * Moved to debhelper-1.2.x. * First try for powerpc and alpha architectures. * New package gstep-base-dbg (link with -lgnustep-base_d). -- Matthias Klose Wed, 24 Feb 1999 18:35:13 +0100 gstep-core (0.5.0.981229-1) frozen unstable; urgency=low * Fixed linking of guile dependent binaries (introduced with guile 1.3-11). * Fixed x permissions of debian installation scripts. -- Matthias Klose Tue, 29 Dec 1998 20:12:17 +0100 gstep-core (0.5.0.981222-1) frozen unstable; urgency=low * Moved symlink patches upstream. * Built with debhelper 1.1.24 and provide the needed debhelper-1.2.18 files. -- Matthias Klose Mon, 22 Dec 1998 21:41:54 +0200 gstep-core (0.5.0.981218-1) frozen unstable; urgency=low * New maintainer. * Previous builds included GNUSTEP_SYSTEM_ROOT, if GNUstep packages were installed. * Fixed build error on the alpha architecture (forwarding still doesn't work). * Install compiled guile modules in /usr/lib/guile1.3; don't know, if this is correct, but better than /usr/share/guile. -- Matthias Klose Sat, 19 Dec 1998 01:53:27 +0200 gstep-core (0.5.0.981215-0.1) frozen unstable; urgency=low * Finally recompiled with correct libc. * Finished db and guile packages (db already was in 0.5.0.980820-0.1). -- Matthias Klose Mon, 14 Dec 1998 16:15:27 +0200 gstep-core (0.5.0.981207-0.1) frozen unstable; urgency=low * Recompiled with correct libc. * Removed dependencies on dpsclient. * Fixed dependencies of gstep-*-dev packages. * debian/rules: Removed explicit ix86 dependencies (again!). * Added debian/patches directory for Debian specific patches. -- Matthias Klose Mon, 7 Dec 1998 14:38:47 +0200 gstep-core (0.5.0.981106cvs-1) frozen unstable; urgency=low * New upstream CVS snapshot.o With the new anon CVS server, we can now track the GNUstep development much faster. * Don't build gstep-xdps until there's a free DPS system in Debian. * Instead, we have the X/RAW backend. With X/RAW, gstep doesn't any longer depend on non-free components and can go into main. * gstep-gui now has a working NSText class. * debian/rules: Rewritten again. -- Gregor Hoffleit Sat, 7 Nov 1998 12:08:45 +0100 gstep-core (0.5.0.980820-0.1) unstable; urgency=low * New upstream snapshot. * Built with X/RAW as backend; still depends on dgs. * New postinst/postrm scripts. * debian/rules: Rewritten. * debian/control.in: Tightened dependencies. * Keep NEXTSTEP files. -- Matthias Klose Tue, 25 Aug 1998 13:48:48 +0200 gstep-core (0.5.0.980806-1) unstable; urgency=low * New upstream snapshot. * GNUstep is now built from a single source package, gstep-core. -- Gregor Hoffleit Fri, 7 Aug 1998 13:33:43 +0200 debian/gnustep-base-doc.doc-base.additions0000664000000000000000000000121511634411765015713 0ustar Document: gnustep-base-additions Title: GNUstep Base Additions API Reference Author: Richard Frith-Macdonald Abstract: The GNUstep base additions package comes with the GNUstep base package, and provides additional non-standard classes and additio nal features for standard classes. It is also intended to be built standalone for use on systems where the GNUstep base is not installed, but where an alternative Foundation is available. Section: Programming/Objective-C Format: HTML Index: /usr/share/GNUstep/Documentation/Developer/BaseAdditions/Reference/index.html Files: /usr/share/GNUstep/Documentation/Developer/BaseAdditions/Reference/*.html debian/control0000664000000000000000000001122512053150505010570 0ustar Source: gnustep-base Section: gnustep Priority: optional Maintainer: Ubuntu Developers XSBC-Original-Maintainer: Debian GNUstep maintainers Uploaders: Gürkan Sengün , Yavor Doganov Standards-Version: 3.9.3 Build-Depends: debhelper (>= 7), gnustep-make (>= 2.6.1), libffi-dev, libxml2-dev, libxslt1-dev, libgnutls-dev, zlib1g-dev, m4, libavahi-client-dev, libicu-dev Build-Depends-Indep: texi2html, texinfo, texlive-base, texlive-latex-base, xml-core Build-Conflicts: libgmp3-dev Homepage: http://gnustep.org Vcs-Git: git://git.debian.org/pkg-gnustep/gnustep-base.git Vcs-Browser: http://git.debian.org/?p=pkg-gnustep/gnustep-base.git Package: gnustep-base-common Architecture: all Depends: gnustep-common (>= 2.6.1), ${misc:Depends}, ${gnustep:Depends} Suggests: gnustep-base-doc (>= ${source:Version}) Description: GNUstep Base library - common files The GNUstep Base Library is a powerful fast library of general-purpose, non-graphical Objective C classes, inspired by the OpenStep API but implementing Apple and GNU additions to the API as well. . This package contains the common files needed by the GNUstep Base library. Package: gnustep-base-runtime Architecture: any Depends: gnustep-base-common (>= ${source:Version}), ${shlibs:Depends}, ${misc:Depends}, ${gnustep:Depends}, lsb-base Description: GNUstep Base library - daemons and tools The GNUstep Base Library is a powerful fast library of general-purpose, non-graphical Objective C classes, inspired by the OpenStep API but implementing Apple and GNU additions to the API as well. . This package contains the runtime support files needed by GNUstep applications. Package: libgnustep-base1.24 Section: libs Architecture: any Depends: gnustep-base-common (>= ${source:Version}), ${shlibs:Depends}, ${misc:Depends}, ${gnustep:Depends} Recommends: gnustep-base-runtime Description: GNUstep Base library The GNUstep Base Library is a powerful fast library of general-purpose, non-graphical Objective C classes, inspired by the OpenStep API but implementing Apple and GNU additions to the API as well. It includes for example classes for unicode strings, arrays, dictionaries, sets, byte streams, typed coders, invocations, notifications, notification dispatchers, scanners, tasks, files, networking, threading, remote object messaging support (distributed objects), event loops, loadable bundles, attributed unicode strings, xml, mime, user defaults. Package: libgnustep-base-dev Section: libdevel Architecture: any Depends: libgnustep-base1.24 (= ${binary:Version}), gnustep-base-common, gnustep-base-runtime (>= ${source:Version}), gnustep-make (>= 2.6.1), ${misc:Depends}, ${gnustep:Depends} Description: GNUstep Base header files and development libraries This package contains the header files and static libraries required to build applications against the GNUstep Base library. . Install this package if you wish to develop your own programs using the GNUstep Base Library. Package: libgnustep-base1.24-dbg Section: debug Architecture: any Priority: extra Depends: gnustep-base-common, libgnustep-base1.24 (= ${binary:Version}), gnustep-base-runtime (= ${binary:Version}), ${misc:Depends}, ${gnustep:Depends} Recommends: libobjc3-dbg | libobjc4-dbg Conflicts: libgnustep-base1.20-dbg, libgnustep-base1.22-dbg Description: GNUstep Base library - debugging symbols This package contains the debigging symbols of the GNUstep Base Library. This package can be used to provide symbol names to a debugger to aid debugging. Package: gnustep-base-examples Architecture: all Depends: gnustep-base-common, ${misc:Depends}, ${gnustep:Depends} Recommends: libgnustep-base-dev (= ${source:Version}) Description: Examples using the GNUstep Base Library The GNUstep Base Library is a powerful fast library of general-purpose, non-graphical Objective C classes, inspired by the OpenStep API but implementing Apple and GNU additions to the API as well. . This is the source for a few example (non-GUI) applications using the GNUstep Base Library. Package: gnustep-base-doc Section: doc Architecture: all Depends: ${misc:Depends}, ${gnustep:Depends}, dpkg (>= 1.15.4) | install-info Recommends: libgnustep-base-dev (>= ${source:Version}) Description: Documentation for the GNUstep Base Library This package contains the GNUstep Base Library API reference in gsdoc and HTML format, as well as the GNUstep Base programming manual and GNUstep Coding Standards in Info and PDF format. debian/gnustep-base-common.xmlcatalogs.in0000664000000000000000000000124011634411765015725 0ustar package;public;-//GNUstep//DTD gsdoc 0.6.5//EN;@GS_DTD_DIR@/gsdoc-0_6_5.dtd package;public;-//GNUstep//DTD gsdoc 0.6.6//EN;@GS_DTD_DIR@/gsdoc-0_6_6.dtd package;public;-//GNUstep//DTD gsdoc 0.6.7//EN;@GS_DTD_DIR@/gsdoc-0_6_7.dtd package;public;-//GNUstep//DTD gsdoc 1.0.0//EN;@GS_DTD_DIR@/gsdoc-1_0_0.dtd package;public;-//GNUstep//DTD gsdoc 1.0.1//EN;@GS_DTD_DIR@/gsdoc-1_0_1.dtd package;public;-//GNUstep//DTD gsdoc 1.0.2//EN;@GS_DTD_DIR@/gsdoc-1_0_2.dtd package;public;-//GNUstep//DTD gsdoc 1.0.3//EN;@GS_DTD_DIR@/gsdoc-1_0_3.dtd package;public;-//GNUstep//DTD plist 0.9//EN;@GS_DTD_DIR@/plist-0_9.dtd root;public;-//GNUstep//DTD gsdoc root;public;-//GNUstep//DTD plist debian/gnustep-base-runtime.lintian-overrides0000664000000000000000000000017311756440304016633 0ustar gnustep-base-runtime: hardening-no-stackprotector usr/bin/* gnustep-base-runtime: hardening-no-fortify-functions usr/bin/* debian/rules0000775000000000000000000003346611756436275010304 0ustar #! /usr/bin/make -f # Uncomment this to turn on verbose mode. #export DH_VERBOSE=1 # we're using brace expansion SHELL := /bin/bash include /usr/share/GNUstep/debian/config.mk export GNUSTEP_MAKEFILES := $(GS_MAKE_DIR) ##### VERSION NUMBERS ################################# # Objective-C version : v_objc := 4:4.6 # GNUstep Make version : v_make := 2.6.1 # GNUstep Base version : v_base := $(shell . ./Version; echo $$VERSION) # GNUstep Base SONAME version : sov_base := $(shell . ./Version; echo $$MAJOR_VERSION.$$MINOR_VERSION) ###################################################### # These are used for cross-compiling and for saving the configure script # from having to guess our platform (since we know it already) DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH) # make some files executable dummy := $(shell chmod +x configure) # packages names p_com = gnustep-base-common p_run = gnustep-base-runtime p_lib = libgnustep-base$(sov_base) p_dev = libgnustep-base-dev p_dbg = $(p_lib)-dbg p_exam = gnustep-base-examples p_doc = gnustep-base-doc # packages temp dirs d_com = $(CURDIR)/debian/$(p_com) d_run = $(CURDIR)/debian/$(p_run) d_lib = $(CURDIR)/debian/$(p_lib) d_dev = $(CURDIR)/debian/$(p_dev) d_dbg = $(CURDIR)/debian/$(p_dbg) d_exam = $(CURDIR)/debian/$(p_exam) d_doc = $(CURDIR)/debian/$(p_doc) # ----------------------------------------------------------------------------- # GNUstep SETTINGS # Dirs include /usr/share/GNUstep/debian/config.mk ifeq ($(GS_USE_FHS),yes) GS_DTD_DIR=/usr/share/xml/gnustep else GS_DTD_DIR=$(GNUSTEP_SYSTEM_LIBRARY)/DTDs endif export GNUSTEP_INSTALLATION_DOMAIN=SYSTEM ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) optim := debug=yes endif CPPFLAGS := $(shell dpkg-buildflags --get CPPFLAGS) CFLAGS := $(shell dpkg-buildflags --get CFLAGS) LDFLAGS := $(shell dpkg-buildflags --get LDFLAGS) -Wl,-z,defs -Wl,--as-needed # ----------------------------------------------------------------------------- foo-debug: echo $(sov_base) # echo $(GS_LIBRARY_COMBO) # echo $(GS_CPU) $(GS_OS) $(GS_COMBO_DIR) deb-scripts: debian/deb-scripts-stamp clean_files += debian/deb-scripts-stamp debian/deb-scripts-stamp: @: # copy Debian scripts b=$(p_run); \ for ext in preinst postinst prerm postrm; do \ if [ -f debian/$$b.$$ext.in ]; then \ sed -e 's,@GDOMAP@,$(GNUSTEP_SYSTEM_TOOLS)/gdomap,g' \ debian/$$b.$$ext.in > debian/$$b.$$ext; \ fi; \ done b=$(p_run); \ for init in gdomap; do \ if [ -f debian/$$b.$$init.in ]; then \ sed -e 's,@GDOMAP@,$(GNUSTEP_SYSTEM_TOOLS)/gdomap,g' \ -e 's,@GSMAKEFILES@,$(GS_MAKE_DIR),g' \ debian/$$b.$$init.in > debian/$$b.$$init; \ fi; \ done touch $@ debian/control debian/control.tmp: debian/control.m4 debian/rules @: # debian/control m4 \ -DV_OBJC='$(v_objc)' \ -DV_MAKE='$(v_make)' \ -DSOV_BASE='$(sov_base)' \ debian/control.m4 | uniq > $@ # Generate the lintian overrides file automatically, to avoid renames # when the SONAME is bumped. clean_files += debian/libgnustep-base$(sov_base).lintian-overrides debian/libgnustep-base$(sov_base).lintian-overrides: debian/libgnustep-baseN.overrides.m4 m4 -DSOV_BASE='$(sov_base)' $< > $@ config: debian/configure-stamp clean_files += debian/configure-stamp debian/configure-stamp: configure dh_testdir # Override the test for libkvm to ensure that /proc is used on # GNU/kFreeBSD even if libvkm-dev is installed (#593898). ./configure CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ OBJCFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)" \ ac_cv_lib_kvm_kvm_getenvv=no \ --enable-libffi \ --disable-openssl \ --disable-bfd touch $@ build: build-arch build-shared: debian/build-shared-stamp clean_files += debian/build-shared-stamp debian/build-shared-stamp: debian/configure-stamp dh_testdir @: # build shared libs $(MAKE) messages=yes $(optim) ADDITIONAL_CFLAGS="$(CFLAGS)" ifeq (,$(filter nocheck,$(DEB_BUILD_OPTIONS))) $(MAKE) check endif touch $@ # Build architecture indep build-doc: debian/build-doc-stamp clean_files += debian/build-doc-stamp debian/build-doc-stamp: debian/configure-stamp build-shared dh_testdir @: # Build main doc. Make sure autogsdoc can find the libraries. LD_LIBRARY_PATH=$(CURDIR)/Source/obj:$$LD_LIBRARY_PATH \ $(MAKE) -C Documentation messages=yes touch $@ # Build architecture dep build-arch: build-shared build-static build-debug build-static: debian/build-static-stamp clean_files += debian/build-static-stamp debian/build-static-stamp: debian/configure-stamp dh_testdir @: # build dev/static libs $(MAKE) -C Source shared=no messages=yes $(optim) touch $@ build-debug: debian/build-debug-stamp clean_files += debian/build-debug-stamp debian/build-debug-stamp: debian/configure-stamp touch $@ # Install all install: install-indep install-arch # Install architecture indep install-indep: install-doc install-common install-doc: build-doc dh_testdir dh_testroot dh_prep -i @: # Install the indep part of the package @: # install main doc $(MAKE) -C Documentation install DESTDIR=$(d_doc) @: # remove postscript doc for file in `find $(d_doc)/$(GNUSTEP_SYSTEM_DOC) -name "*.ps"`; do \ rm $$file ; done @: # rename Info documents with generic/ambiguous names cd $(d_doc)/$(GNUSTEP_SYSTEM_DOC_INFO); \ mv manual.info gs-base.info; \ mv coding-standards.info gs-standards.info @: # symlink dh_installdirs -p$(p_doc) usr/share/doc/$(p_com) dh_link -p$(p_doc) \ $(GNUSTEP_SYSTEM_DOC)/Developer usr/share/doc/$(p_com)/Developer \ usr/share/doc/$(p_com)/Developer usr/share/doc/$(p_doc)/Developer @: # Prepare example package dh_installdirs -p$(p_exam) usr/share/doc/$(p_com) dh_link -p$(p_exam) usr/share/doc/$(p_com) usr/share/doc/$(p_exam) install-common: install-shared # The files actually get installed in install-shared. # We trust the Debian timezones. rm -rf $(d_com)/$(GNUSTEP_SYSTEM_LIBRARY)/Libraries/gnustep-base/Versions/$(sov_base)/Resources/NSTimeZones/zones ln -s /usr/share/zoneinfo \ $(d_com)/$(GNUSTEP_SYSTEM_LIBRARY)/Libraries/gnustep-base/Versions/$(sov_base)/Resources/NSTimeZones/zones ln -s /etc/timezone \ $(d_com)/$(GNUSTEP_SYSTEM_LIBRARY)/Libraries/gnustep-base/Versions/$(sov_base)/Resources/NSTimeZones/localtime # Install architecture dep install-arch: install-shared install-static install-debug install-shared: build-shared dh_testdir -p$(p_run) dh_testroot -p$(p_run) dh_prep -p$(p_run) @: # install shared version of libraries $(MAKE) install DESTDIR=$(d_run) @: # move arch-indep things to -common dh_prep -p$(p_com) mkdir -p $(d_com)/$(GNUSTEP_SYSTEM_LIBRARY)/Libraries #mkdir -p debian/gnustep-base-runtime//usr/lib/GNUstep/Libraries/gnustep-base mv $(d_run)/$(GNUSTEP_SYSTEM_LIBRARY)/Libraries/gnustep-base $(d_com)/$(GNUSTEP_SYSTEM_LIBRARY)/Libraries #mkdir -p debian/gnustep-base-runtime//usr/lib/GNUstep/DTDs mv $(d_run)/$(GNUSTEP_SYSTEM_LIBRARY)/DTDs $(d_com)/$(GNUSTEP_SYSTEM_LIBRARY) @: # remove headers from shared packages rm -rf $(d_run)/$(GNUSTEP_SYSTEM_HEADERS) @: # remove Makefiles/Additional/base.make rm -rf $(d_run)/$(GS_MAKE_DIR) rm -f $(d_run)/etc/services.add @: # Install gdomap option file dh_installdirs -p$(p_run) etc/default cp -p $(CURDIR)/debian/gdomap.default $(d_run)/etc/default/gdomap @: # Move shared lib dh_install -p$(p_lib) \ debian/$(p_run)/$(GNUSTEP_SYSTEM_LIBRARIES)/lib*.so.* $(GNUSTEP_SYSTEM_LIBRARIES) rm -rf debian/$(p_run)/$(GNUSTEP_SYSTEM_LIBRARIES)/lib* @: # Doc symlinks dh_link -p$(p_lib) usr/share/doc/$(p_com) usr/share/doc/$(p_lib) dh_link -p$(p_run) usr/share/doc/$(p_com) usr/share/doc/$(p_run) install-static: install-shared build-static dh_testdir -p$(p_dev) dh_testroot -p$(p_dev) dh_prep -p$(p_dev) # gnustep-make 2.2.x has a bug and does not create the directory. mkdir -p $(d_dev)$(GNUSTEP_SYSTEM_HEADERS)/GNUstepBase @: # install static version of libraries $(MAKE) -C Source install shared=no DESTDIR=$(d_dev) @: # Install base.make here (instead of in -runtime) install -m 644 -D base.make $(d_dev)/$(GS_MAKE_DIR)/Additional/base.make @: # Remove Resources dir rm -rf $(d_dev)/$(GNUSTEP_SYSTEM_LIBRARY)/Libraries/gnustep-base @: # Development symlink dh_link -p$(p_dev) $(GNUSTEP_SYSTEM_LIBRARIES)/libgnustep-base.so.$(sov_base) \ $(GNUSTEP_SYSTEM_LIBRARIES)/libgnustep-base.so @: # Doc symlink dh_link -p$(p_dev) usr/share/doc/$(p_com) usr/share/doc/$(p_dev) install-debug: build-debug dh_testdir -p$(p_dbg) dh_testroot -p$(p_dbg) dh_prep -p$(p_dbg) @: # Doc symlink dh_link -p$(p_dbg) usr/share/doc/$(p_com) usr/share/doc/$(p_dbg) # Build architecture-independent files here. binary-indep: debian/control build-indep install-indep dh_testdir -i dh_testroot -i dh_installchangelogs -p$(p_doc) ChangeLog dh_installdocs -p$(p_doc) ANNOUNCE NEWS README dh_installchangelogs -p$(p_com) ChangeLog dh_installdocs -p$(p_com) ANNOUNCE NEWS README gsdh_gnustep -i dh_link -i dh_installexamples -p$(p_exam) -X.cvsignore -X.gdbinit -X.arch-ids\ Examples Version config.mak find $(d_exam) -name '*.m' ! -perm 644 -exec chmod 644 \{\} \; dh_compress -i -X.m -XGNUmakefile dh_fixperms -i @: # remove empty directories, when all components are in place for d in `find $(d_com) $(d_doc) $(d_exam) -depth -type d -empty 2> /dev/null`; \ do \ case $$d in */usr/share/doc*|*/etc) continue; esac; \ while rmdir $$d 2> /dev/null; do d=`dirname $$d`; done; \ done sed -e 's,@GS_DTD_DIR@,$(GS_DTD_DIR),g' \ debian/gnustep-base-common.xmlcatalogs.in > debian/gnustep-base-common.xmlcatalogs; \ dh_installxmlcatalogs -i dh_installdeb -i dh_gencontrol -i dh_md5sums -i dh_builddeb -i # Build architecture-dependent files here. binary-arch: debian/control deb-scripts build-arch install-arch debian/libgnustep-base$(sov_base).lintian-overrides dh_testdir -a dh_testroot -a gsdh_gnustep -a ifeq ($(GS_USE_FHS),yes) #mkdir -p $(d_lib)/$(GNUSTEP_SYSTEM_LIBRARY)/Bundles #mv $(d_lib)/usr/share/GNUstep/Libraries/gnustep-base/Versions/$(sov_base)/Resources/SSL.bundle $(d_lib)/$(GNUSTEP_SYSTEM_LIBRARY)/Bundles/ #dh_link -p$(p_lib) $(GNUSTEP_SYSTEM_LIBRARY)/Bundles/SSL.bundle usr/share/GNUstep/Libraries/gnustep-base/Versions/$(sov_base)/Resources/SSL.bundle endif dh_installman -p$(p_run) Tools/gdomap.8 Tools/gsdoc.7 \ Tools/autogsdoc.1 Tools/cvtenc.1 Tools/defaults.1 Tools/gdnc.1 \ Tools/pldes.1 Tools/sfparse.1 Tools/xmlparse.1 \ debian/HTMLLinker.1 debian/make_strings.1 dh_lintian -a dh_link -a @: # rename pl binary, to avoid conflict with tendra package mv $(d_run)/$(GNUSTEP_SYSTEM_TOOLS)/pl $(d_run)/$(GNUSTEP_SYSTEM_TOOLS)/plio @: # pldes manpage documents many programs for i in plio plget plser plmerge plparse pl2link; do \ ln -sf pldes.1 $(d_run)/usr/share/man/man1/$$i.1; \ done dh_strip -a --dbg-package=$(p_dbg) @: # remove empty directories, when all components are in place for d in `find $(d_run) $(d_dev) $(d_dbg) -depth -type d -empty 2> /dev/null`; do \ case $$d in */usr/share/doc*|*/etc) continue; esac; \ while rmdir $$d 2> /dev/null; do d=`dirname $$d`; done; \ done dh_compress -s dh_fixperms -s dh_installinit -p$(p_run) --init-script=gdomap @: # Calculate shlib dependencies for -runtime and lib package separatly dh_makeshlibs -p$(p_lib) -V dh_installdeb -p$(p_run) dh_shlibdeps -p$(p_run) -l$(d_lib)/$(GNUSTEP_SYSTEM_LIBRARIES) dh_installdeb -p$(p_lib) dh_shlibdeps -p$(p_lib) -l$(d_lib)/$(GNUSTEP_SYSTEM_LIBRARIES) @: # Calculate shlib dependencies for other packages dh_makeshlibs -p$(p_lib) \ -V '$(p_lib) (>= $(v_base)), gnustep-base-runtime (>= $(v_base))' dh_installdeb -a -N$(p_run) -N$(p_lib) dh_shlibdeps -a -N$(p_run) -N$(p_lib) -l$(d_lib)/$(GNUSTEP_SYSTEM_LIBRARIES) dh_gencontrol -s dh_md5sums -s dh_builddeb -s # Test that debian/control is up to date clean_files += debian/control.tmp test-control: debian/control.tmp diff debian/control debian/control.tmp && rm -f debian/control.tmp clean: test-control dh_testdir dh_testroot rm -rf Tools/obj Source/obj # if config.mak does not exist, then we assume that we don't need to # make clean if [ -e config.mak ]; then \ $(MAKE) -C Documentation/manual clean; \ $(MAKE) -C Documentation clean; \ $(MAKE) clean; \ $(MAKE) -C Documentation/manual distclean; \ $(MAKE) -C Documentation distclean; \ $(MAKE) distclean; \ fi rm -f Documentation/*html rm -f Documentation/.igsdoc rm -f Documentation/version.texi rm -rf Documentation/{Base,BaseAdditions} rm -rf Documentation/General/General rm -f Documentation/manual/manual.html rm -rf Documentation/BaseTools rm -f Documentation/General/*.html rm -f Documentation/General/.igsdoc rm -f debian/gnustep-base-runtime.{pre,post}{inst,rm} rm -f debian/gnustep-base-runtime.gdomap #rm -f debian/gnustep-base-runtime.{init,shlibs,gdomap} rm -f Source/{mframe.h,config.h,GSConfig.h} rm -f Source/mframe/config.{log,mak,status} rm -f Source/.igsdoc rm -f Source/{Base,BaseAdditions}.{stamp,.gsdoc,html} rm -rf Source/{Base,BaseAdditions} rm -f Source/{Base,BaseAdditions}.gsdoc rm -f Source/Info-gnustep.plist rm -f Headers/gnustep/base/o_{array,hash,list,map}_{bas,cbs}.h rm -f Source/o_{array,hash,list,map}_{bas,cbs}.m rm -f Source/dynamic-load.h rm -rf SSL/SSL.bundle -find -name obj | xargs rm -f rm -f SSL/config.{h,log,mak,status} #rm -f Tools/*.{html} rm -f Tools/.igsdoc rm -rf Tools/BaseTools rm -f $(clean_files) dh_clean # Testing only target upstream: build-shared dh_testdir -p$(p_com) dh_testroot -p$(p_com) dh_prep -p$(p_com) @: # install shared version of libraries $(MAKE) install DESTDIR=$(CURDIR)/debian/upstream binary: binary-indep binary-arch .PHONY: deb-scripts clean \ build build-indep build-arch build-shared build-static build-debug \ install install-indep install-arch \ install-shared install-static install-debug \ binary binary-indep binary-arch debian/watch0000664000000000000000000000015011634411765010225 0ustar version=3 opts=pasv \ ftp://ftp.gnustep.org/pub/gnustep/core/gnustep-base-([\d\.]+[02468]\.\d)\.tar\.gz debian/gnustep-base-doc.doc-base.tools0000664000000000000000000000062411634411765015100 0ustar Document: gnustep-base-tools Title: GNUstep Base Command-line Tools Author: Richard Frith-Macdonald Abstract: The GNUstep Base Tools are command line utilities that come with the GNUstep Base distribution. Section: Programming/Objective-C Format: HTML Index: /usr/share/GNUstep/Documentation/Developer/Tools/Reference/index.html Files: /usr/share/GNUstep/Documentation/Developer/Tools/Reference/*.html debian/control.m40000664000000000000000000001126012053150614011107 0ustar Source: gnustep-base Section: gnustep Priority: optional Maintainer: Ubuntu Developers XSBC-Original-Maintainer: Debian GNUstep maintainers Uploaders: Gürkan Sengün , Yavor Doganov Standards-Version: 3.9.3 Build-Depends: debhelper (>= 7), gnustep-make (>= V_MAKE), libffi-dev, libxml2-dev, libxslt1-dev, libgnutls-dev, zlib1g-dev, m4, libavahi-client-dev, libicu-dev Build-Depends-Indep: texi2html, texinfo, texlive-base, texlive-latex-base, xml-core Build-Conflicts: libgmp3-dev Homepage: http://gnustep.org Vcs-Git: git://git.debian.org/pkg-gnustep/gnustep-base.git Vcs-Browser: http://git.debian.org/?p=pkg-gnustep/gnustep-base.git Package: gnustep-base-common Architecture: all Depends: gnustep-common (>= V_MAKE), ${misc:Depends}, ${gnustep:Depends} Suggests: gnustep-base-doc (>= ${source:Version}) Description: GNUstep Base library - common files The GNUstep Base Library is a powerful fast library of general-purpose, non-graphical Objective C classes, inspired by the OpenStep API but implementing Apple and GNU additions to the API as well. . This package contains the common files needed by the GNUstep Base library. Package: gnustep-base-runtime Architecture: any Depends: gnustep-base-common (>= ${source:Version}), ${shlibs:Depends}, ${misc:Depends}, ${gnustep:Depends}, lsb-base Description: GNUstep Base library - daemons and tools The GNUstep Base Library is a powerful fast library of general-purpose, non-graphical Objective C classes, inspired by the OpenStep API but implementing Apple and GNU additions to the API as well. . This package contains the runtime support files needed by GNUstep applications. Package: libgnustep-base`'SOV_BASE Section: libs Architecture: any Depends: gnustep-base-common (>= ${source:Version}), ${shlibs:Depends}, ${misc:Depends}, ${gnustep:Depends} Recommends: gnustep-base-runtime Description: GNUstep Base library The GNUstep Base Library is a powerful fast library of general-purpose, non-graphical Objective C classes, inspired by the OpenStep API but implementing Apple and GNU additions to the API as well. It includes for example classes for unicode strings, arrays, dictionaries, sets, byte streams, typed coders, invocations, notifications, notification dispatchers, scanners, tasks, files, networking, threading, remote object messaging support (distributed objects), event loops, loadable bundles, attributed unicode strings, xml, mime, user defaults. Package: libgnustep-base-dev Section: libdevel Architecture: any Depends: libgnustep-base`'SOV_BASE (= ${binary:Version}), gnustep-base-common, gnustep-base-runtime (>= ${source:Version}), gnustep-make (>= V_MAKE), ${misc:Depends}, ${gnustep:Depends} Description: GNUstep Base header files and development libraries This package contains the header files and static libraries required to build applications against the GNUstep Base library. . Install this package if you wish to develop your own programs using the GNUstep Base Library. Package: libgnustep-base`'SOV_BASE-dbg Section: debug Architecture: any Priority: extra Depends: gnustep-base-common, libgnustep-base`'SOV_BASE (= ${binary:Version}), gnustep-base-runtime (= ${binary:Version}), ${misc:Depends}, ${gnustep:Depends} Recommends: libobjc3-dbg | libobjc4-dbg Conflicts: libgnustep-base1.20-dbg, libgnustep-base1.22-dbg Description: GNUstep Base library - debugging symbols This package contains the debigging symbols of the GNUstep Base Library. This package can be used to provide symbol names to a debugger to aid debugging. Package: gnustep-base-examples Architecture: all Depends: gnustep-base-common, ${misc:Depends}, ${gnustep:Depends} Recommends: libgnustep-base-dev (= ${source:Version}) Description: Examples using the GNUstep Base Library The GNUstep Base Library is a powerful fast library of general-purpose, non-graphical Objective C classes, inspired by the OpenStep API but implementing Apple and GNU additions to the API as well. . This is the source for a few example (non-GUI) applications using the GNUstep Base Library. Package: gnustep-base-doc Section: doc Architecture: all Depends: ${misc:Depends}, ${gnustep:Depends}, dpkg (>= 1.15.4) | install-info Recommends: libgnustep-base-dev (>= ${source:Version}) Description: Documentation for the GNUstep Base Library This package contains the GNUstep Base Library API reference in gsdoc and HTML format, as well as the GNUstep Base programming manual and GNUstep Coding Standards in Info and PDF format. debian/source.lintian-overrides0000664000000000000000000000015411634411765014060 0ustar # The odd ordering is to avoid circular dependency. gnustep-base: debian-rules-calls-debhelper-in-odd-order debian/gnustep-base-runtime.postinst.in0000664000000000000000000000367711634411765015505 0ustar #! /bin/sh # postinst script for gnustep-base # # see: dh_installdeb(1) set -e # summary of how this script can be called: # * `configure' # * `abort-upgrade' # * `abort-remove' `in-favour' # # * `abort-deconfigure' `in-favour' # `removing' # # for details, see /usr/share/doc/packaging-manual/ # # quoting from the policy: # Any necessary prompting should almost always be confined to the # post-installation script, and should be protected with a conditional # so that unnecessary prompting doesn't happen if a package's # installation fails and the `postinst' is called with `abort-upgrade', # `abort-remove' or `abort-deconfigure'. setup_config() { f=/etc/GNUstep/gdomap_probes if [ ! -f $f ]; then if [ ! -d /etc/GNUstep ]; then mkdir /etc/GNUstep; fi cat > $f <> $f done fi } case "$1" in configure) setup_config # gdomap should not be setuid root. # TODO: Remove after the squeeze release. if dpkg-statoverride --list @GDOMAP@ >/dev/null; then dpkg-statoverride --remove @GDOMAP@ fi if test -u @GDOMAP@; then chmod -s @GDOMAP@ fi # Left-over from the gnustep-make 1.x -> 2.x transition. if dpkg-statoverride --list /usr/lib/GNUstep/System/Tools/gdomap \ >/dev/null; then dpkg-statoverride --remove /usr/lib/GNUstep/System/Tools/gdomap fi ;; abort-upgrade|abort-remove|abort-deconfigure) ;; *) echo "postinst called with unknown argument \`$1'" >&2 exit 0 ;; esac #DEBHELPER# exit 0 debian/gnustep-base-doc.doc-base.manual0000664000000000000000000000101211634411765015205 0ustar Document: gnustep-base-programming-manual Title: Objective-C Language and GNUstep Base Library Programming Manual Author: Francis Botto, Richard Frith-Macdonald, Nicola Pero, Adrian Robert Abstract: This manual is an introduction to Objective-C programming and the GNUstep Development environment. Section: Programming/Objective-C Format: Info Index: /usr/share/info/gs-base.info.gz Files: /usr/share/info/gs-base.info*.gz Format: PDF Files: /usr/share/GNUstep/Documentation/Developer/Base/ProgrammingManual/manual.pdf debian/patches/0000775000000000000000000000000012257556073010633 5ustar debian/patches/recent-libxml2-fix.patch0000664000000000000000000000101512053150447015251 0ustar Description: fixup for recent libxml2 Origin: http://svn.gna.org/viewcvs/gnustep/libs/base/trunk/Source/Additions/GSXML.m?r1=35538&r2=35730 --- a/Source/Additions/GSXML.m +++ b/Source/Additions/GSXML.m @@ -984,7 +984,11 @@ 1, "utf-8"); xmlOutputBufferFlush(buf); +#if LIBXML_VERSION < 20900 string = UTF8StrLen(buf->buffer->content, buf->buffer->use); +#else + string = UTF8StrLen(xmlBufContent(buf->buffer), xmlBufUse(buf->buffer)); +#endif xmlOutputBufferClose(buf); } return string; debian/patches/add-chapter.patch0000664000000000000000000000067512257556073014040 0ustar Description: Add chapter to coding-standards.texi to fix FTBFS. Author: Dimitri John Ledkov --- gnustep-base-1.24.0.orig/Documentation/coding-standards.texi +++ gnustep-base-1.24.0/Documentation/coding-standards.texi @@ -52,7 +52,7 @@ into another language, under the above c @end titlepage @node Top, Introduction, (dir), (dir) -@top Coding Standards +@chapter Coding Standards @menu * Introduction:: debian/patches/kfreebsd-fake-main.patch0000664000000000000000000000075611756372256015301 0ustar 2011-11-03 Yavor Doganov * configure.ac: Force GS_FAKE_MAIN on GNU/kFreeBSD as programs with more than 512 args abort (workaround for #644868). --- gnustep-base.orig/configure.ac +++ gnustep-base/configure.ac @@ -2434,6 +2434,7 @@ case "$target_os" in freebsd2*) enable_fake_main=yes;; freebsd*) ;; + kfreebsd*) enable_fake_main=yes;; netbsd*) enable_fake_main=yes;; openbsd*) enable_fake_main=yes;; *sysv*) enable_fake_main=yes;; debian/patches/autoreconf.patch0000664000000000000000000365651711756373750014052 0ustar Regenerate the build system. --- gnustep-base.orig/configure +++ gnustep-base/configure @@ -1,18 +1,20 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.63. +# Generated by GNU Autoconf 2.69. +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# # -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which @@ -20,23 +22,15 @@ alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; esac - fi - - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - as_nl=' ' export as_nl @@ -44,7 +38,13 @@ as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else @@ -55,7 +55,7 @@ as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; - case $arg in + case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; @@ -78,13 +78,6 @@ } fi -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - # IFS # We need space, tab and new line, in precisely that order. Quoting is @@ -94,15 +87,16 @@ IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. -case $0 in +as_myself= +case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done IFS=$as_save_IFS ;; @@ -114,12 +108,16 @@ fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } + exit 1 fi -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' @@ -131,330 +129,344 @@ LANGUAGE=C export LANGUAGE -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - # CDPATH. -$as_unset CDPATH - +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then - if (eval ":") 2>/dev/null; then - as_have_required=yes + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST else - as_have_required=no + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac fi - - if test $as_have_required = yes && (eval ": -(as_func_return () { - (exit \$1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi - -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = \"\$1\" ); then - : +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes else - exitcode=1 - echo positional parameters were not saved. + as_have_required=no fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : -test \$exitcode = 0) || { (exit 1); exit 1; } - -( - as_lineno_1=\$LINENO - as_lineno_2=\$LINENO - test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && - test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } -") 2> /dev/null; then - : else - as_candidate_shells= - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - case $as_dir in + as_found=: + case $as_dir in #( /*) for as_base in sh bash ksh sh5; do - as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi done;; esac + as_found=false done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } IFS=$as_save_IFS - for as_shell in $as_candidate_shells $SHELL; do - # Try only shells that exist, to save several forks. - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { ("$as_shell") 2> /dev/null <<\_ASEOF -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, +$0: including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." + fi + exit 1 fi - - -: -_ASEOF -}; then - CONFIG_SHELL=$as_shell - as_have_required=yes - if { "$as_shell" 2> /dev/null <<\_ASEOF -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ -: -(as_func_return () { - (exit $1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" -exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi +} # as_fn_mkdir_p -if as_func_ret_success; then - : +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append -if ( set x; as_func_ret_success y && test x = "$1" ); then - : +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' else - exitcode=1 - echo positional parameters were not saved. -fi - -test $exitcode = 0) || { (exit 1); exit 1; } - -( - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } - -_ASEOF -}; then - break -fi - -fi - - done - - if test "x$CONFIG_SHELL" != x; then - for as_var in BASH_ENV ENV - do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - done - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} -fi - - - if test $as_have_required = no; then - echo This script requires a shell more modern than all the - echo shells that I found on your system. Please install a - echo modern shell, or manually run the script under such a - echo shell if you do have one. - { (exit 1); exit 1; } -fi - - -fi - -fi - + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith -(eval "as_func_return () { - (exit \$1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error -exitcode=0 -if as_func_success; then - : +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. + as_expr=false fi -if as_func_ret_success; then - : +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. + as_basename=false fi -if ( set x; as_func_ret_success y && test x = \"\$1\" ); then - : +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname else - exitcode=1 - echo positional parameters were not saved. + as_dirname=false fi -test \$exitcode = 0") || { - echo No shell found that supports shell functions. - echo Please tell bug-autoconf@gnu.org about your system, - echo including any error possibly output before this message. - echo This can help us improve future autoconf versions. - echo Configuration will now proceed without shell functions. -} +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= @@ -471,9 +483,12 @@ s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). @@ -482,29 +497,18 @@ exit } - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in +case `echo -n x` in #((((( -n*) - case `echo 'x\c'` in + case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then @@ -519,49 +523,29 @@ # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. + # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' + as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then - as_mkdir_p=: + as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x +as_test_x='test -x' +as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -570,11 +554,11 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - -exec 7<&0 &1 +test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` @@ -589,7 +573,6 @@ subdirs= MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME= @@ -597,6 +580,7 @@ PACKAGE_VERSION= PACKAGE_STRING= PACKAGE_BUGREPORT= +PACKAGE_URL= ac_unique_file="Source/NSArray.m" # Factoring default headers for most tests. @@ -786,6 +770,7 @@ program_transform_name prefix exec_prefix +PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION @@ -906,8 +891,9 @@ fi case $ac_option in - *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *) ac_optarg=yes ;; + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. @@ -952,8 +938,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -979,8 +964,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1184,8 +1168,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1201,8 +1184,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1232,17 +1214,17 @@ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; - -*) { $as_echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; @@ -1251,7 +1233,7 @@ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac @@ -1259,15 +1241,13 @@ if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { $as_echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; - fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2 - { (exit 1); exit 1; }; } ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi @@ -1290,8 +1270,7 @@ [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac - { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' @@ -1305,8 +1284,6 @@ if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe - $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi @@ -1321,11 +1298,9 @@ ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - { $as_echo "$as_me: error: working directory cannot be determined" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. @@ -1364,13 +1339,11 @@ fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 - { (exit 1); exit 1; }; } + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then @@ -1410,7 +1383,7 @@ --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages + -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files @@ -1594,13 +1567,14 @@ LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. +Report bugs to the package provider. _ACEOF ac_status=$? fi @@ -1664,459 +1638,1031 @@ if $ac_init_version; then cat <<\_ACEOF configure -generated by GNU Autoconf 2.63 +generated by GNU Autoconf 2.69 -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +Copyright (C) 2012 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. -It was created by $as_me, which was -generated by GNU Autoconf 2.63. Invocation command line was +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 - $ $0 $@ + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval -_ACEOF -exec 5>>config.log +} # ac_fn_c_try_compile + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () { -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` +} # ac_fn_c_try_cpp -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval \${$3+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } -_ASUNAME +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" -done -IFS=$as_save_IFS +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno -} >&5 +} # ac_fn_c_check_header_mongrel -cat >&5 <<_ACEOF +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval -## ----------- ## -## Core tests. ## -## ----------- ## +} # ac_fn_c_try_run +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> _ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno +} # ac_fn_c_check_header_compile -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; - 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - ac_configure_args="$ac_configure_args '$ac_arg'" - ;; - esac - done -done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval - cat <<\_ASBOX -## ---------------- ## -## Cache variables. ## -## ---------------- ## -_ASBOX - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) $as_unset $ac_var ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo +} # ac_fn_c_try_link - cat <<\_ASBOX -## ----------------- ## -## Output variables. ## -## ----------------- ## -_ASBOX - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 - if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------------- ## -## File substitutions. ## -## ------------------- ## -_ASBOX - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ - if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## -## confdefs.h. ## -## ----------- ## -_ASBOX - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal -done -ac_signal=0 +#ifdef __STDC__ +# include +#else +# include +#endif -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h +#undef $2 -# Predefined preprocessor variables. +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" +int +main () +{ +return $2 (); + ; + return 0; +} _ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno +} # ac_fn_c_check_func -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - +# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES +# -------------------------------------------- +# Tries to find the compile-time value of EXPR in a program that includes +# INCLUDES, setting VAR accordingly. Returns whether the value could be +# computed +ac_fn_c_compute_int () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) >= 0)]; +test_array [0] = 0; +return test_array [0]; -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" + ; + return 0; +} _ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_lo=0 ac_mid=0 + while :; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) <= $ac_mid)]; +test_array [0] = 0; +return test_array [0]; - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" + ; + return 0; +} _ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_hi=$ac_mid; break +else + as_fn_arith $ac_mid + 1 && ac_lo=$as_val + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) < 0)]; +test_array [0] = 0; +return test_array [0]; - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" + ; + return 0; +} _ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_hi=-1 ac_mid=-1 + while :; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) >= $ac_mid)]; +test_array [0] = 0; +return test_array [0]; - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - ac_site_file1=$CONFIG_SITE -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_lo=$ac_mid; break else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site + as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test -r "$ac_site_file"; then - { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done else - { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file + ac_lo= ac_hi= fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) <= $ac_mid)]; +test_array [0] = 0; +return test_array [0]; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_hi=$ac_mid +else + as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +done +case $ac_lo in #(( +?*) eval "$3=\$ac_lo"; ac_retval=0 ;; +'') ac_retval=1 ;; +esac + else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +static long int longval () { return $2; } +static unsigned long int ulongval () { return $2; } +#include +#include +int +main () +{ + FILE *f = fopen ("conftest.val", "w"); + if (! f) + return 1; + if (($2) < 0) + { + long int i = longval (); + if (i != ($2)) + return 1; + fprintf (f, "%ld", i); + } + else + { + unsigned long int i = ulongval (); + if (i != ($2)) + return 1; + fprintf (f, "%lu", i); + } + /* Do not output a trailing newline, as this causes \r\n confusion + on some platforms. */ + return ferror (f) || fclose (f) != 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + echo >>conftest.val; read $3 &5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=no" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof ($2)) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof (($2))) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : +else + eval "$3=yes" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno +} # ac_fn_c_check_type +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. +It was created by $as_me, which was +generated by GNU Autoconf 2.69. Invocation command line was + $ $0 $@ +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` +_ASUNAME +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - +} >&5 +cat >&5 <<_ACEOF +## ----------- ## +## Core tests. ## +## ----------- ## -# If GNUSTEP_MAKEFILES is undefined, try to use gnustep-config to determine it. -if test -z "$GNUSTEP_MAKEFILES"; then - GNUSTEP_MAKEFILES=`gnustep-config --variable=GNUSTEP_MAKEFILES 2>&5` -fi +_ACEOF -if test -z "$GNUSTEP_MAKEFILES"; then - { { $as_echo "$as_me:$LINENO: error: You must have the gnustep-make package installed and set up the GNUSTEP_MAKEFILES environment variable to contain the path to the makefiles directory before configuring!" >&5 -$as_echo "$as_me: error: You must have the gnustep-make package installed and set up the GNUSTEP_MAKEFILES environment variable to contain the path to the makefiles directory before configuring!" >&2;} - { (exit 1); exit 1; }; } -fi -# If LIBRARY_COMBO is undefined, try to use gnustep-config to determine it. -if test -z "$LIBRARY_COMBO"; then - LIBRARY_COMBO=`gnustep-config --variable=LIBRARY_COMBO 2>&5` -fi +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} -nonfragile=`gnustep-config --objc-flags | grep _NONFRAGILE_ABI 2>&5` -if test -z "$nonfragile"; then - nonfragile=no - BASE_NONFRAGILE_ABI=0 -else - nonfragile=yes - BASE_NONFRAGILE_ABI=1 -fi +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo -# We shouldn't be loading GNUstep.sh here. It would load in a lot of -# variables which might get confused with the ones that will be used -# at runtime. We will load it later once we have determined (and -# saved) the runtime configuration. + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo -# This variable might get temporarily overwritten with the -# GNUSTEP_MAKEFILES of the runtime configuration, make sure we keep -# track of the original one. CURRENT_GNUSTEP_MAKEFILES is the one -# that we use to locate the actual gnustep-make installation that -# will build the software. -CURRENT_GNUSTEP_MAKEFILES="$GNUSTEP_MAKEFILES" + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi -#-------------------------------------------------------------------- -# Use config.guess, config.sub and install-sh provided by gnustep-make -#-------------------------------------------------------------------- -ac_aux_dir= -for ac_dir in $CURRENT_GNUSTEP_MAKEFILES "$srcdir"/$CURRENT_GNUSTEP_MAKEFILES; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done -if test -z "$ac_aux_dir"; then - { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $CURRENT_GNUSTEP_MAKEFILES \"$srcdir\"/$CURRENT_GNUSTEP_MAKEFILES" >&5 -$as_echo "$as_me: error: cannot find install-sh or install.sh in $CURRENT_GNUSTEP_MAKEFILES \"$srcdir\"/$CURRENT_GNUSTEP_MAKEFILES" >&2;} - { (exit 1); exit 1; }; } -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. +ac_signal=0 +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h +$as_echo "/* confdefs.h */" > confdefs.h -#-------------------------------------------------------------------- -# Use a .h file with #define's, instead of -D command-line switches -#-------------------------------------------------------------------- -ac_config_headers="$ac_config_headers Headers/GNUstepBase/config.h" +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + +# If GNUSTEP_MAKEFILES is undefined, try to use gnustep-config to determine it. +if test -z "$GNUSTEP_MAKEFILES"; then + GNUSTEP_MAKEFILES=`gnustep-config --variable=GNUSTEP_MAKEFILES 2>&5` +fi + +if test -z "$GNUSTEP_MAKEFILES"; then + as_fn_error $? "You must have the gnustep-make package installed and set up the GNUSTEP_MAKEFILES environment variable to contain the path to the makefiles directory before configuring!" "$LINENO" 5 +fi + +# If LIBRARY_COMBO is undefined, try to use gnustep-config to determine it. +if test -z "$LIBRARY_COMBO"; then + LIBRARY_COMBO=`gnustep-config --variable=LIBRARY_COMBO 2>&5` +fi + +nonfragile=`gnustep-config --objc-flags | grep _NONFRAGILE_ABI 2>&5` +if test -z "$nonfragile"; then + nonfragile=no + BASE_NONFRAGILE_ABI=0 +else + nonfragile=yes + BASE_NONFRAGILE_ABI=1 +fi + + +# We shouldn't be loading GNUstep.sh here. It would load in a lot of +# variables which might get confused with the ones that will be used +# at runtime. We will load it later once we have determined (and +# saved) the runtime configuration. + +# This variable might get temporarily overwritten with the +# GNUSTEP_MAKEFILES of the runtime configuration, make sure we keep +# track of the original one. CURRENT_GNUSTEP_MAKEFILES is the one +# that we use to locate the actual gnustep-make installation that +# will build the software. +CURRENT_GNUSTEP_MAKEFILES="$GNUSTEP_MAKEFILES" + +#-------------------------------------------------------------------- +# Use config.guess, config.sub and install-sh provided by gnustep-make +#-------------------------------------------------------------------- +ac_aux_dir= +for ac_dir in $CURRENT_GNUSTEP_MAKEFILES "$srcdir"/$CURRENT_GNUSTEP_MAKEFILES; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in $CURRENT_GNUSTEP_MAKEFILES \"$srcdir\"/$CURRENT_GNUSTEP_MAKEFILES" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + + +#-------------------------------------------------------------------- +# Use a .h file with #define's, instead of -D command-line switches +#-------------------------------------------------------------------- +ac_config_headers="$ac_config_headers Headers/GNUstepBase/config.h" #-------------------------------------------------------------------- @@ -2124,35 +2670,27 @@ #-------------------------------------------------------------------- # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 -$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 -{ $as_echo "$as_me:$LINENO: checking build system type" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } -if test "${ac_cv_build+set}" = set; then +if ${ac_cv_build+:} false; then : $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && - { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 -$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; -*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 -$as_echo "$as_me: error: invalid value of canonical build" >&2;} - { (exit 1); exit 1; }; };; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' @@ -2168,28 +2706,24 @@ case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac -{ $as_echo "$as_me:$LINENO: checking host system type" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } -if test "${ac_cv_host+set}" = set; then +if ${ac_cv_host+:} false; then : $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 -$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; -*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 -$as_echo "$as_me: error: invalid value of canonical host" >&2;} - { (exit 1); exit 1; }; };; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' @@ -2205,28 +2739,24 @@ case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac -{ $as_echo "$as_me:$LINENO: checking target system type" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5 $as_echo_n "checking target system type... " >&6; } -if test "${ac_cv_target+set}" = set; then +if ${ac_cv_target+:} false; then : $as_echo_n "(cached) " >&6 else if test "x$target_alias" = x; then ac_cv_target=$ac_cv_host else ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || - { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 -$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5 fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_target" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5 $as_echo "$ac_cv_target" >&6; } case $ac_cv_target in *-*-*) ;; -*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 -$as_echo "$as_me: error: invalid value of canonical target" >&2;} - { (exit 1); exit 1; }; };; +*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;; esac target=$ac_cv_target ac_save_IFS=$IFS; IFS='-' @@ -2252,7 +2782,7 @@ #--------------------------------------------------------------------- # Location of the GNUstep.conf config file (--with-config-file) #--------------------------------------------------------------------- -{ $as_echo "$as_me:$LINENO: checking for GNUstep configuration file to use at runtime" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNUstep configuration file to use at runtime" >&5 $as_echo_n "checking for GNUstep configuration file to use at runtime... " >&6; } # This requires gnustep-make > 1.13.0 to work. For gnustep-make = @@ -2272,7 +2802,7 @@ # Check whether --with-config-file was given. -if test "${with_config_file+set}" = set; then +if test "${with_config_file+set}" = set; then : withval=$with_config_file; result="$withval" else result="no" @@ -2291,7 +2821,7 @@ GNUSTEP_TARGET_CONFIG_FILE="$GNUSTEP_MAKE_CONFIG" ;; esac fi -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_TARGET_CONFIG_FILE" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_TARGET_CONFIG_FILE" >&5 $as_echo "$GNUSTEP_TARGET_CONFIG_FILE" >&6; } #----------------------------------------------------------------- @@ -2306,10 +2836,10 @@ mingw*) enable_env_config=no;; *) enable_env_config=yes;; esac -{ $as_echo "$as_me:$LINENO: checking whether the GNUstep.conf file path can be set in the environment" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the GNUstep.conf file path can be set in the environment" >&5 $as_echo_n "checking whether the GNUstep.conf file path can be set in the environment... " >&6; } # Check whether --enable-environment-config-file was given. -if test "${enable_environment_config_file+set}" = set; then +if test "${enable_environment_config_file+set}" = set; then : enableval=$enable_environment_config_file; ac_cv_environment_config_file=$enableval else ac_cv_environment_config_file=$enable_env_config @@ -2317,19 +2847,15 @@ if test "$ac_cv_environment_config_file" = "yes"; then -cat >>confdefs.h <<\_ACEOF -#define OPTION_NO_ENVIRONMENT 0 -_ACEOF +$as_echo "#define OPTION_NO_ENVIRONMENT 0" >>confdefs.h - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else -cat >>confdefs.h <<\_ACEOF -#define OPTION_NO_ENVIRONMENT 1 -_ACEOF +$as_echo "#define OPTION_NO_ENVIRONMENT 1" >>confdefs.h - { $as_echo "$as_me:$LINENO: result: no: disabled from the command-line" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no: disabled from the command-line" >&5 $as_echo "no: disabled from the command-line" >&6; } fi @@ -2363,31 +2889,31 @@ # installation (or of the config file you specify). # It can be annoying in certain cases though; this option lets you # turn it off. -{ $as_echo "$as_me:$LINENO: checking if we should import an existing configuration file now" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we should import an existing configuration file now" >&5 $as_echo_n "checking if we should import an existing configuration file now... " >&6; } # Check whether --enable-importing-config-file was given. -if test "${enable_importing_config_file+set}" = set; then +if test "${enable_importing_config_file+set}" = set; then : enableval=$enable_importing_config_file; ac_cv_importing_config_file=$enableval else ac_cv_importing_config_file="yes" fi if test "$ac_cv_importing_config_file" = "no"; then - { $as_echo "$as_me:$LINENO: result: no: disabled from the command-line" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no: disabled from the command-line" >&5 $as_echo "no: disabled from the command-line" >&6; } else - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi if test "$ac_cv_importing_config_file" = "yes" ; then - { $as_echo "$as_me:$LINENO: checking for default GNUstep configuration file to use" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for default GNUstep configuration file to use" >&5 $as_echo_n "checking for default GNUstep configuration file to use... " >&6; } # Check whether --with-default-config was given. -if test "${with_default_config+set}" = set; then +if test "${with_default_config+set}" = set; then : withval=$with_default_config; result="$withval" else result="no" @@ -2411,7 +2937,7 @@ # installed. GNUSTEP_DEFAULT_CONFIG="$GNUSTEP_MAKE_CONFIG" fi - { $as_echo "$as_me:$LINENO: result: $GNUSTEP_DEFAULT_CONFIG" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_DEFAULT_CONFIG" >&5 $as_echo "$GNUSTEP_DEFAULT_CONFIG" >&6; } # @@ -2427,7 +2953,7 @@ # Use the default config file to override standard values. # if test ! -f "$GNUSTEP_DEFAULT_CONFIG"; then - { $as_echo "$as_me:$LINENO: result: fail: file \"$GNUSTEP_DEFAULT_CONFIG\" does not exist" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: fail: file \"$GNUSTEP_DEFAULT_CONFIG\" does not exist" >&5 $as_echo "fail: file \"$GNUSTEP_DEFAULT_CONFIG\" does not exist" >&6; } # Ohoh ... things are not going well. We are asked to import # a config file that doesn't exist. So all paths might be unset @@ -2438,24 +2964,20 @@ # system might be already screwed. If they don't want to import # a config file (eg, they don't have one and they don't care about # the hardcoded paths) they should just say so. ;-) - { { $as_echo "$as_me:$LINENO: error: Please run configure again with the --disable-importing-config-file option or specifying an alternative file using the --with-default-config= option" >&5 -$as_echo "$as_me: error: Please run configure again with the --disable-importing-config-file option or specifying an alternative file using the --with-default-config= option" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "Please run configure again with the --disable-importing-config-file option or specifying an alternative file using the --with-default-config= option" "$LINENO" 5 exit 1 else - { $as_echo "$as_me:$LINENO: result: trying to import \"$GNUSTEP_DEFAULT_CONFIG\"" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: trying to import \"$GNUSTEP_DEFAULT_CONFIG\"" >&5 $as_echo "trying to import \"$GNUSTEP_DEFAULT_CONFIG\"" >&6; } if test -r "$GNUSTEP_DEFAULT_CONFIG" then - { $as_echo "$as_me:$LINENO: If this fails, please run configure again with the --disable-importing-config-file option or specifying an alternative file using the --with-default-config= option" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: If this fails, please run configure again with the --disable-importing-config-file option or specifying an alternative file using the --with-default-config= option" >&5 $as_echo "$as_me: If this fails, please run configure again with the --disable-importing-config-file option or specifying an alternative file using the --with-default-config= option" >&6;} . "$GNUSTEP_DEFAULT_CONFIG" else - { $as_echo "$as_me:$LINENO: result: fail: file \"$GNUSTEP_DEFAULT_CONFIG\" is not readable" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: fail: file \"$GNUSTEP_DEFAULT_CONFIG\" is not readable" >&5 $as_echo "fail: file \"$GNUSTEP_DEFAULT_CONFIG\" is not readable" >&6; } - { { $as_echo "$as_me:$LINENO: error: Unable to import configuration file at $GNUSTEP_DEFAULT_CONFIG. Please run configure again with a revised/corrected --with-default-config= option or with --disable-importing-config-file." >&5 -$as_echo "$as_me: error: Unable to import configuration file at $GNUSTEP_DEFAULT_CONFIG. Please run configure again with a revised/corrected --with-default-config= option or with --disable-importing-config-file." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "Unable to import configuration file at $GNUSTEP_DEFAULT_CONFIG. Please run configure again with a revised/corrected --with-default-config= option or with --disable-importing-config-file." "$LINENO" 5 exit 1 fi fi @@ -2525,11 +3047,11 @@ if test x"$GNUSTEP_USER_DIR_DOC_MAN" = x""; then GNUSTEP_USER_DIR_DOC_MAN=$GNUSTEP_USER_DIR/Documentation/man; fi if test x"$GNUSTEP_USER_DIR_DOC_INFO" = x""; then GNUSTEP_USER_DIR_DOC_INFO=$GNUSTEP_USER_DIR/Documentation/info; fi -{ $as_echo "$as_me:$LINENO: checking for GNUstep-base installation domain" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNUstep-base installation domain" >&5 $as_echo_n "checking for GNUstep-base installation domain... " >&6; } # Check whether --with-installation-domain was given. -if test "${with_installation_domain+set}" = set; then +if test "${with_installation_domain+set}" = set; then : withval=$with_installation_domain; result="$withval" else result="no" @@ -2548,7 +3070,7 @@ then result=`gnustep-config --installation-domain-for=gnustep-base 2>&5` else - { $as_echo "$as_me:$LINENO: WARNING: The 'gnustep-config' script was not found or out of date." >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: The 'gnustep-config' script was not found or out of date." >&5 $as_echo "$as_me: WARNING: The 'gnustep-config' script was not found or out of date." >&2;} result=$GNUSTEP_INSTALLATION_DOMAIN if test "$result" = "" @@ -2561,25 +3083,23 @@ fi case "$result" in SYSTEM) - { $as_echo "$as_me:$LINENO: result: SYSTEM" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: SYSTEM" >&5 $as_echo "SYSTEM" >&6; } GNUSTEP_BASE_PATH="$GNUSTEP_SYSTEM_TOOLS";; LOCAL) - { $as_echo "$as_me:$LINENO: result: LOCAL" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: LOCAL" >&5 $as_echo "LOCAL" >&6; } GNUSTEP_BASE_PATH="$GNUSTEP_LOCAL_TOOLS";; NETWORK) - { $as_echo "$as_me:$LINENO: result: NETWORK" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: NETWORK" >&5 $as_echo "NETWORK" >&6; } GNUSTEP_BASE_PATH="$GNUSTEP_NETWORK_TOOLS";; USER) - { $as_echo "$as_me:$LINENO: result: USER" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: USER" >&5 $as_echo "USER" >&6; } GNUSTEP_BASE_PATH="$GNUSTEP_USER_TOOLS";; *) - { { $as_echo "$as_me:$LINENO: error: Unknown installation domain '$result' (it should be SYSTEM, LOCAL, NETWORK or USER). Please run configure again with the option --with-installation-domain=LOCAL (or whatever domain you want to install into)." >&5 -$as_echo "$as_me: error: Unknown installation domain '$result' (it should be SYSTEM, LOCAL, NETWORK or USER). Please run configure again with the option --with-installation-domain=LOCAL (or whatever domain you want to install into)." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "Unknown installation domain '$result' (it should be SYSTEM, LOCAL, NETWORK or USER). Please run configure again with the option --with-installation-domain=LOCAL (or whatever domain you want to install into)." "$LINENO" 5 exit 1;; esac # We store GNUSTEP_BASE_DOMAIN in config.mak so that we can check @@ -2674,9 +3194,9 @@ esac done -{ $as_echo "$as_me:$LINENO: checking if we are hardcoding any relative paths in gnustep-base" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we are hardcoding any relative paths in gnustep-base" >&5 $as_echo_n "checking if we are hardcoding any relative paths in gnustep-base... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_BASE_RELATIVE_PATHS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_BASE_RELATIVE_PATHS" >&5 $as_echo "$GNUSTEP_BASE_RELATIVE_PATHS" >&6; } @@ -2685,15009 +3205,3347 @@ # into gnustep-base. This is to help users in finding # misconfigurations. # -{ $as_echo "$as_me:$LINENO: We store the following filesystem layout into gnustep-base, to be used when no config file is found" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: We store the following filesystem layout into gnustep-base, to be used when no config file is found" >&5 $as_echo "$as_me: We store the following filesystem layout into gnustep-base, to be used when no config file is found" >&6;} -{ $as_echo "$as_me:$LINENO: checking for Makefiles directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Makefiles directory" >&5 $as_echo_n "checking for Makefiles directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_MAKEFILES" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_MAKEFILES" >&5 $as_echo "$GNUSTEP_MAKEFILES" >&6; } -{ $as_echo "$as_me:$LINENO: checking for user defaults directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for user defaults directory" >&5 $as_echo_n "checking for user defaults directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_USER_DEFAULTS_DIR" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_USER_DEFAULTS_DIR" >&5 $as_echo "$GNUSTEP_USER_DEFAULTS_DIR" >&6; } -{ $as_echo "$as_me:$LINENO: checking for user config file" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for user config file" >&5 $as_echo_n "checking for user config file... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_USER_CONFIG_FILE" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_USER_CONFIG_FILE" >&5 $as_echo "$GNUSTEP_USER_CONFIG_FILE" >&6; } -{ $as_echo "$as_me:$LINENO: checking for System Applications directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for System Applications directory" >&5 $as_echo_n "checking for System Applications directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_SYSTEM_APPS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_SYSTEM_APPS" >&5 $as_echo "$GNUSTEP_SYSTEM_APPS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for System Admin Applications directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for System Admin Applications directory" >&5 $as_echo_n "checking for System Admin Applications directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_SYSTEM_ADMIN_APPS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_SYSTEM_ADMIN_APPS" >&5 $as_echo "$GNUSTEP_SYSTEM_ADMIN_APPS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for System Web Applications directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for System Web Applications directory" >&5 $as_echo_n "checking for System Web Applications directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_SYSTEM_WEB_APPS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_SYSTEM_WEB_APPS" >&5 $as_echo "$GNUSTEP_SYSTEM_WEB_APPS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for System Tools directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for System Tools directory" >&5 $as_echo_n "checking for System Tools directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_SYSTEM_TOOLS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_SYSTEM_TOOLS" >&5 $as_echo "$GNUSTEP_SYSTEM_TOOLS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for System Admin Tools directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for System Admin Tools directory" >&5 $as_echo_n "checking for System Admin Tools directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_SYSTEM_ADMIN_TOOLS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_SYSTEM_ADMIN_TOOLS" >&5 $as_echo "$GNUSTEP_SYSTEM_ADMIN_TOOLS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for System Library directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for System Library directory" >&5 $as_echo_n "checking for System Library directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_SYSTEM_LIBRARY" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_SYSTEM_LIBRARY" >&5 $as_echo "$GNUSTEP_SYSTEM_LIBRARY" >&6; } -{ $as_echo "$as_me:$LINENO: checking for System Libraries directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for System Libraries directory" >&5 $as_echo_n "checking for System Libraries directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_SYSTEM_LIBRARIES" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_SYSTEM_LIBRARIES" >&5 $as_echo "$GNUSTEP_SYSTEM_LIBRARIES" >&6; } -{ $as_echo "$as_me:$LINENO: checking for System Headers directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for System Headers directory" >&5 $as_echo_n "checking for System Headers directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_SYSTEM_HEADERS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_SYSTEM_HEADERS" >&5 $as_echo "$GNUSTEP_SYSTEM_HEADERS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for System Documentation directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for System Documentation directory" >&5 $as_echo_n "checking for System Documentation directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_SYSTEM_DOC" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_SYSTEM_DOC" >&5 $as_echo "$GNUSTEP_SYSTEM_DOC" >&6; } -{ $as_echo "$as_me:$LINENO: checking for System Info Documentation directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for System Info Documentation directory" >&5 $as_echo_n "checking for System Info Documentation directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_SYSTEM_DOC_INFO" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_SYSTEM_DOC_INFO" >&5 $as_echo "$GNUSTEP_SYSTEM_DOC_INFO" >&6; } -{ $as_echo "$as_me:$LINENO: checking for System Man Documentation directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for System Man Documentation directory" >&5 $as_echo_n "checking for System Man Documentation directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_SYSTEM_DOC_MAN" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_SYSTEM_DOC_MAN" >&5 $as_echo "$GNUSTEP_SYSTEM_DOC_MAN" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Network Applications directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Network Applications directory" >&5 $as_echo_n "checking for Network Applications directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_NETWORK_APPS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_NETWORK_APPS" >&5 $as_echo "$GNUSTEP_NETWORK_APPS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Network Admin Applications directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Network Admin Applications directory" >&5 $as_echo_n "checking for Network Admin Applications directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_NETWORK_ADMIN_APPS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_NETWORK_ADMIN_APPS" >&5 $as_echo "$GNUSTEP_NETWORK_ADMIN_APPS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Network Web Applications directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Network Web Applications directory" >&5 $as_echo_n "checking for Network Web Applications directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_NETWORK_WEB_APPS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_NETWORK_WEB_APPS" >&5 $as_echo "$GNUSTEP_NETWORK_WEB_APPS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Network Tools directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Network Tools directory" >&5 $as_echo_n "checking for Network Tools directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_NETWORK_TOOLS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_NETWORK_TOOLS" >&5 $as_echo "$GNUSTEP_NETWORK_TOOLS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Network Admin Tools directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Network Admin Tools directory" >&5 $as_echo_n "checking for Network Admin Tools directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_NETWORK_ADMIN_TOOLS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_NETWORK_ADMIN_TOOLS" >&5 $as_echo "$GNUSTEP_NETWORK_ADMIN_TOOLS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Network Library directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Network Library directory" >&5 $as_echo_n "checking for Network Library directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_NETWORK_LIBRARY" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_NETWORK_LIBRARY" >&5 $as_echo "$GNUSTEP_NETWORK_LIBRARY" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Network Libraries directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Network Libraries directory" >&5 $as_echo_n "checking for Network Libraries directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_NETWORK_LIBRARIES" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_NETWORK_LIBRARIES" >&5 $as_echo "$GNUSTEP_NETWORK_LIBRARIES" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Network Headers directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Network Headers directory" >&5 $as_echo_n "checking for Network Headers directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_NETWORK_HEADERS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_NETWORK_HEADERS" >&5 $as_echo "$GNUSTEP_NETWORK_HEADERS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Network Documentation directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Network Documentation directory" >&5 $as_echo_n "checking for Network Documentation directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_NETWORK_DOC" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_NETWORK_DOC" >&5 $as_echo "$GNUSTEP_NETWORK_DOC" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Network Info Documentation directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Network Info Documentation directory" >&5 $as_echo_n "checking for Network Info Documentation directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_NETWORK_DOC_INFO" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_NETWORK_DOC_INFO" >&5 $as_echo "$GNUSTEP_NETWORK_DOC_INFO" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Network Man Documentation directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Network Man Documentation directory" >&5 $as_echo_n "checking for Network Man Documentation directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_NETWORK_DOC_MAN" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_NETWORK_DOC_MAN" >&5 $as_echo "$GNUSTEP_NETWORK_DOC_MAN" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Local Applications directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Local Applications directory" >&5 $as_echo_n "checking for Local Applications directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_LOCAL_APPS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_LOCAL_APPS" >&5 $as_echo "$GNUSTEP_LOCAL_APPS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Local Admin Applications directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Local Admin Applications directory" >&5 $as_echo_n "checking for Local Admin Applications directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_LOCAL_ADMIN_APPS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_LOCAL_ADMIN_APPS" >&5 $as_echo "$GNUSTEP_LOCAL_ADMIN_APPS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Local Web Applications directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Local Web Applications directory" >&5 $as_echo_n "checking for Local Web Applications directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_LOCAL_WEB_APPS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_LOCAL_WEB_APPS" >&5 $as_echo "$GNUSTEP_LOCAL_WEB_APPS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Local Tools directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Local Tools directory" >&5 $as_echo_n "checking for Local Tools directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_LOCAL_TOOLS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_LOCAL_TOOLS" >&5 $as_echo "$GNUSTEP_LOCAL_TOOLS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Local Admin Tools directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Local Admin Tools directory" >&5 $as_echo_n "checking for Local Admin Tools directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_LOCAL_ADMIN_TOOLS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_LOCAL_ADMIN_TOOLS" >&5 $as_echo "$GNUSTEP_LOCAL_ADMIN_TOOLS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Local Library directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Local Library directory" >&5 $as_echo_n "checking for Local Library directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_LOCAL_LIBRARY" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_LOCAL_LIBRARY" >&5 $as_echo "$GNUSTEP_LOCAL_LIBRARY" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Local Libraries directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Local Libraries directory" >&5 $as_echo_n "checking for Local Libraries directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_LOCAL_LIBRARIES" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_LOCAL_LIBRARIES" >&5 $as_echo "$GNUSTEP_LOCAL_LIBRARIES" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Local Headers directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Local Headers directory" >&5 $as_echo_n "checking for Local Headers directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_LOCAL_HEADERS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_LOCAL_HEADERS" >&5 $as_echo "$GNUSTEP_LOCAL_HEADERS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Local Documentation directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Local Documentation directory" >&5 $as_echo_n "checking for Local Documentation directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_LOCAL_DOC" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_LOCAL_DOC" >&5 $as_echo "$GNUSTEP_LOCAL_DOC" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Local Info Documentation directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Local Info Documentation directory" >&5 $as_echo_n "checking for Local Info Documentation directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_LOCAL_DOC_INFO" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_LOCAL_DOC_INFO" >&5 $as_echo "$GNUSTEP_LOCAL_DOC_INFO" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Local Man Documentation directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Local Man Documentation directory" >&5 $as_echo_n "checking for Local Man Documentation directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_LOCAL_DOC_MAN" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_LOCAL_DOC_MAN" >&5 $as_echo "$GNUSTEP_LOCAL_DOC_MAN" >&6; } -{ $as_echo "$as_me:$LINENO: checking for User Applications directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for User Applications directory" >&5 $as_echo_n "checking for User Applications directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_USER_DIR_APPS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_USER_DIR_APPS" >&5 $as_echo "$GNUSTEP_USER_DIR_APPS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for User Admin Applications directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for User Admin Applications directory" >&5 $as_echo_n "checking for User Admin Applications directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_USER_DIR_ADMIN_APPS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_USER_DIR_ADMIN_APPS" >&5 $as_echo "$GNUSTEP_USER_DIR_ADMIN_APPS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for User Web Applications directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for User Web Applications directory" >&5 $as_echo_n "checking for User Web Applications directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_USER_DIR_WEB_APPS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_USER_DIR_WEB_APPS" >&5 $as_echo "$GNUSTEP_USER_DIR_WEB_APPS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for User Tools directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for User Tools directory" >&5 $as_echo_n "checking for User Tools directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_USER_DIR_TOOLS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_USER_DIR_TOOLS" >&5 $as_echo "$GNUSTEP_USER_DIR_TOOLS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for User Admin Tools directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for User Admin Tools directory" >&5 $as_echo_n "checking for User Admin Tools directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_USER_DIR_ADMIN_TOOLS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_USER_DIR_ADMIN_TOOLS" >&5 $as_echo "$GNUSTEP_USER_DIR_ADMIN_TOOLS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for User Library directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for User Library directory" >&5 $as_echo_n "checking for User Library directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_USER_DIR_LIBRARY" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_USER_DIR_LIBRARY" >&5 $as_echo "$GNUSTEP_USER_DIR_LIBRARY" >&6; } -{ $as_echo "$as_me:$LINENO: checking for User Libraries directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for User Libraries directory" >&5 $as_echo_n "checking for User Libraries directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_USER_DIR_LIBRARIES" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_USER_DIR_LIBRARIES" >&5 $as_echo "$GNUSTEP_USER_DIR_LIBRARIES" >&6; } -{ $as_echo "$as_me:$LINENO: checking for User Headers directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for User Headers directory" >&5 $as_echo_n "checking for User Headers directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_USER_DIR_HEADERS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_USER_DIR_HEADERS" >&5 $as_echo "$GNUSTEP_USER_DIR_HEADERS" >&6; } -{ $as_echo "$as_me:$LINENO: checking for User Documentation directory" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for User Documentation directory" >&5 $as_echo_n "checking for User Documentation directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_USER_DIR_DOC" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_USER_DIR_DOC" >&5 $as_echo "$GNUSTEP_USER_DIR_DOC" >&6; } -{ $as_echo "$as_me:$LINENO: checking for User Info Documentation directory" >&5 -$as_echo_n "checking for User Info Documentation directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_USER_DIR_DOC_INFO" >&5 -$as_echo "$GNUSTEP_USER_DIR_DOC_INFO" >&6; } -{ $as_echo "$as_me:$LINENO: checking for User Man Documentation directory" >&5 -$as_echo_n "checking for User Man Documentation directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_USER_DIR_DOC_MAN" >&5 -$as_echo "$GNUSTEP_USER_DIR_DOC_MAN" >&6; } - -{ $as_echo "$as_me:$LINENO: checking for System User directory" >&5 -$as_echo_n "checking for System User directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_SYSTEM_USERS_DIR" >&5 -$as_echo "$GNUSTEP_SYSTEM_USERS_DIR" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Network User directory" >&5 -$as_echo_n "checking for Network User directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_NETWORK_USERS_DIR" >&5 -$as_echo "$GNUSTEP_NETWORK_USERS_DIR" >&6; } -{ $as_echo "$as_me:$LINENO: checking for Local User directory" >&5 -$as_echo_n "checking for Local User directory... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $GNUSTEP_LOCAL_USERS_DIR" >&5 -$as_echo "$GNUSTEP_LOCAL_USERS_DIR" >&6; } - -# -# Set the default configuration file values in config.h to be hard-coded -# into NSPathUtilities.m -# -GNUSTEP_MAKEFILES=`echo $GNUSTEP_MAKEFILES|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_MAKEFILES "$GNUSTEP_MAKEFILES" -_ACEOF - -GNUSTEP_USER_DEFAULTS_DIR=`echo $GNUSTEP_USER_DEFAULTS_DIR|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_USER_DEFAULTS_DIR "$GNUSTEP_USER_DEFAULTS_DIR" -_ACEOF - -GNUSTEP_USER_CONFIG_FILE=`echo $GNUSTEP_USER_CONFIG_FILE|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_USER_CONFIG_FILE "$GNUSTEP_USER_CONFIG_FILE" -_ACEOF - -GNUSTEP_TARGET_CONFIG_FILE=`echo $GNUSTEP_TARGET_CONFIG_FILE|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_CONFIG_FILE "$GNUSTEP_TARGET_CONFIG_FILE" -_ACEOF - - -# -# SYSTEM domain paths -# -GNUSTEP_SYSTEM_APPS=`echo $GNUSTEP_SYSTEM_APPS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_SYSTEM_APPS "$GNUSTEP_SYSTEM_APPS" -_ACEOF - - -GNUSTEP_SYSTEM_ADMIN_APPS=`echo $GNUSTEP_SYSTEM_ADMIN_APPS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_SYSTEM_ADMIN_APPS "$GNUSTEP_SYSTEM_ADMIN_APPS" -_ACEOF - - -GNUSTEP_SYSTEM_WEB_APPS=`echo $GNUSTEP_SYSTEM_WEB_APPS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_SYSTEM_WEB_APPS "$GNUSTEP_SYSTEM_WEB_APPS" -_ACEOF - - -GNUSTEP_SYSTEM_TOOLS=`echo $GNUSTEP_SYSTEM_TOOLS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_SYSTEM_TOOLS "$GNUSTEP_SYSTEM_TOOLS" -_ACEOF - - -GNUSTEP_SYSTEM_ADMIN_TOOLS=`echo $GNUSTEP_SYSTEM_ADMIN_TOOLS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_SYSTEM_ADMIN_TOOLS "$GNUSTEP_SYSTEM_ADMIN_TOOLS" -_ACEOF - - -GNUSTEP_SYSTEM_LIBRARY=`echo $GNUSTEP_SYSTEM_LIBRARY|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_SYSTEM_LIBRARY "$GNUSTEP_SYSTEM_LIBRARY" -_ACEOF - - -GNUSTEP_SYSTEM_LIBRARIES=`echo $GNUSTEP_SYSTEM_LIBRARIES|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_SYSTEM_LIBRARIES "$GNUSTEP_SYSTEM_LIBRARIES" -_ACEOF - - -GNUSTEP_SYSTEM_HEADERS=`echo $GNUSTEP_SYSTEM_HEADERS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_SYSTEM_HEADERS "$GNUSTEP_SYSTEM_HEADERS" -_ACEOF - - -GNUSTEP_SYSTEM_DOC=`echo $GNUSTEP_SYSTEM_DOC|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_SYSTEM_DOC "$GNUSTEP_SYSTEM_DOC" -_ACEOF - - -GNUSTEP_SYSTEM_DOC_MAN=`echo $GNUSTEP_SYSTEM_DOC_MAN|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_SYSTEM_DOC_MAN "$GNUSTEP_SYSTEM_DOC_MAN" -_ACEOF - - -GNUSTEP_SYSTEM_DOC_INFO=`echo $GNUSTEP_SYSTEM_DOC_INFO|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_SYSTEM_DOC_INFO "$GNUSTEP_SYSTEM_DOC_INFO" -_ACEOF - - -# -# NETWORK domain paths -# -GNUSTEP_NETWORK_APPS=`echo $GNUSTEP_NETWORK_APPS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_NETWORK_APPS "$GNUSTEP_NETWORK_APPS" -_ACEOF - - -GNUSTEP_NETWORK_ADMIN_APPS=`echo $GNUSTEP_NETWORK_ADMIN_APPS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_NETWORK_ADMIN_APPS "$GNUSTEP_NETWORK_ADMIN_APPS" -_ACEOF - - -GNUSTEP_NETWORK_WEB_APPS=`echo $GNUSTEP_NETWORK_WEB_APPS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_NETWORK_WEB_APPS "$GNUSTEP_NETWORK_WEB_APPS" -_ACEOF - - -GNUSTEP_NETWORK_TOOLS=`echo $GNUSTEP_NETWORK_TOOLS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_NETWORK_TOOLS "$GNUSTEP_NETWORK_TOOLS" -_ACEOF - - -GNUSTEP_NETWORK_ADMIN_TOOLS=`echo $GNUSTEP_NETWORK_ADMIN_TOOLS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_NETWORK_ADMIN_TOOLS "$GNUSTEP_NETWORK_ADMIN_TOOLS" -_ACEOF - - -GNUSTEP_NETWORK_LIBRARY=`echo $GNUSTEP_NETWORK_LIBRARY|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_NETWORK_LIBRARY "$GNUSTEP_NETWORK_LIBRARY" -_ACEOF - - -GNUSTEP_NETWORK_LIBRARIES=`echo $GNUSTEP_NETWORK_LIBRARIES|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_NETWORK_LIBRARIES "$GNUSTEP_NETWORK_LIBRARIES" -_ACEOF - - -GNUSTEP_NETWORK_HEADERS=`echo $GNUSTEP_NETWORK_HEADERS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_NETWORK_HEADERS "$GNUSTEP_NETWORK_HEADERS" -_ACEOF - - -GNUSTEP_NETWORK_DOC=`echo $GNUSTEP_NETWORK_DOC|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_NETWORK_DOC "$GNUSTEP_NETWORK_DOC" -_ACEOF - - -GNUSTEP_NETWORK_DOC_MAN=`echo $GNUSTEP_NETWORK_DOC_MAN|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_NETWORK_DOC_MAN "$GNUSTEP_NETWORK_DOC_MAN" -_ACEOF - - -GNUSTEP_NETWORK_DOC_INFO=`echo $GNUSTEP_NETWORK_DOC_INFO|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_NETWORK_DOC_INFO "$GNUSTEP_NETWORK_DOC_INFO" -_ACEOF - - -# -# LOCAL domain paths -# -GNUSTEP_LOCAL_APPS=`echo $GNUSTEP_LOCAL_APPS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_LOCAL_APPS "$GNUSTEP_LOCAL_APPS" -_ACEOF - - -GNUSTEP_LOCAL_ADMIN_APPS=`echo $GNUSTEP_LOCAL_ADMIN_APPS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_LOCAL_ADMIN_APPS "$GNUSTEP_LOCAL_ADMIN_APPS" -_ACEOF - - -GNUSTEP_LOCAL_WEB_APPS=`echo $GNUSTEP_LOCAL_WEB_APPS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_LOCAL_WEB_APPS "$GNUSTEP_LOCAL_WEB_APPS" -_ACEOF - - -GNUSTEP_LOCAL_TOOLS=`echo $GNUSTEP_LOCAL_TOOLS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_LOCAL_TOOLS "$GNUSTEP_LOCAL_TOOLS" -_ACEOF - - -GNUSTEP_LOCAL_ADMIN_TOOLS=`echo $GNUSTEP_LOCAL_ADMIN_TOOLS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_LOCAL_ADMIN_TOOLS "$GNUSTEP_LOCAL_ADMIN_TOOLS" -_ACEOF - - -GNUSTEP_LOCAL_LIBRARY=`echo $GNUSTEP_LOCAL_LIBRARY|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_LOCAL_LIBRARY "$GNUSTEP_LOCAL_LIBRARY" -_ACEOF - - -GNUSTEP_LOCAL_LIBRARIES=`echo $GNUSTEP_LOCAL_LIBRARIES|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_LOCAL_LIBRARIES "$GNUSTEP_LOCAL_LIBRARIES" -_ACEOF - - -GNUSTEP_LOCAL_HEADERS=`echo $GNUSTEP_LOCAL_HEADERS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_LOCAL_HEADERS "$GNUSTEP_LOCAL_HEADERS" -_ACEOF - - -GNUSTEP_LOCAL_DOC=`echo $GNUSTEP_LOCAL_DOC|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_LOCAL_DOC "$GNUSTEP_LOCAL_DOC" -_ACEOF - - -GNUSTEP_LOCAL_DOC_MAN=`echo $GNUSTEP_LOCAL_DOC_MAN|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_LOCAL_DOC_MAN "$GNUSTEP_LOCAL_DOC_MAN" -_ACEOF - - -GNUSTEP_LOCAL_DOC_INFO=`echo $GNUSTEP_LOCAL_DOC_INFO|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_LOCAL_DOC_INFO "$GNUSTEP_LOCAL_DOC_INFO" -_ACEOF - - -# -# USER_DIR domain paths -# -GNUSTEP_USER_DIR_APPS=`echo $GNUSTEP_USER_DIR_APPS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_USER_DIR_APPS "$GNUSTEP_USER_DIR_APPS" -_ACEOF - - -GNUSTEP_USER_DIR_ADMIN_APPS=`echo $GNUSTEP_USER_DIR_ADMIN_APPS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_USER_DIR_ADMIN_APPS "$GNUSTEP_USER_DIR_ADMIN_APPS" -_ACEOF - - -GNUSTEP_USER_DIR_WEB_APPS=`echo $GNUSTEP_USER_DIR_WEB_APPS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_USER_DIR_WEB_APPS "$GNUSTEP_USER_DIR_WEB_APPS" -_ACEOF - - -GNUSTEP_USER_DIR_TOOLS=`echo $GNUSTEP_USER_DIR_TOOLS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_USER_DIR_TOOLS "$GNUSTEP_USER_DIR_TOOLS" -_ACEOF - - -GNUSTEP_USER_DIR_ADMIN_TOOLS=`echo $GNUSTEP_USER_DIR_ADMIN_TOOLS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_USER_DIR_ADMIN_TOOLS "$GNUSTEP_USER_DIR_ADMIN_TOOLS" -_ACEOF - - -GNUSTEP_USER_DIR_LIBRARY=`echo $GNUSTEP_USER_DIR_LIBRARY|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_USER_DIR_LIBRARY "$GNUSTEP_USER_DIR_LIBRARY" -_ACEOF - - -GNUSTEP_USER_DIR_LIBRARIES=`echo $GNUSTEP_USER_DIR_LIBRARIES|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_USER_DIR_LIBRARIES "$GNUSTEP_USER_DIR_LIBRARIES" -_ACEOF - - -GNUSTEP_USER_DIR_HEADERS=`echo $GNUSTEP_USER_DIR_HEADERS|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_USER_DIR_HEADERS "$GNUSTEP_USER_DIR_HEADERS" -_ACEOF - - -GNUSTEP_USER_DIR_DOC=`echo $GNUSTEP_USER_DIR_DOC|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_USER_DIR_DOC "$GNUSTEP_USER_DIR_DOC" -_ACEOF - - -GNUSTEP_USER_DIR_DOC_MAN=`echo $GNUSTEP_USER_DIR_DOC_MAN|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_USER_DIR_DOC_MAN "$GNUSTEP_USER_DIR_DOC_MAN" -_ACEOF - - -GNUSTEP_USER_DIR_DOC_INFO=`echo $GNUSTEP_USER_DIR_DOC_INFO|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_USER_DIR_DOC_INFO "$GNUSTEP_USER_DIR_DOC_INFO" -_ACEOF - - -GNUSTEP_TARGET_SYSTEM_USERS_DIR=`echo $GNUSTEP_TARGET_SYSTEM_USERS_DIR|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_SYSTEM_USERS_DIR "$GNUSTEP_TARGET_SYSTEM_USERS_DIR" -_ACEOF - -GNUSTEP_TARGET_NETWORK_USERS_DIR=`echo $GNUSTEP_TARGET_NETWORK_USERS_DIR|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_NETWORK_USERS_DIR "$GNUSTEP_TARGET_NETWORK_USERS_DIR" -_ACEOF - -GNUSTEP_TARGET_LOCAL_USERS_DIR=`echo $GNUSTEP_TARGET_LOCAL_USERS_DIR|sed -e 's/\\\\/\\\\\\\\/g'` - -cat >>confdefs.h <<_ACEOF -#define GNUSTEP_TARGET_LOCAL_USERS_DIR "$GNUSTEP_TARGET_LOCAL_USERS_DIR" -_ACEOF - - -# -# Now load the values to be used in locating libraries etc used when -# building the base library ... as supplied by the gnustep-make package -# -# It looks like we ought to source the whole GNUstep.sh here, and even -# ask it to output all variables! That way we have access to (eg) -# GNUSTEP_SYSTEM_HEADERS below. -# -# We need to unset any values that we really need, or existing settings -# would be used by GNUstep.sh -# -unset GNUSTEP_SYSTEM_HEADERS -unset GNUSTEP_SYSTEM_LIBRARIES -unset GNUSTEP_NETWORK_HEADERS -unset GNUSTEP_NETWORK_LIBRARIES -unset GNUSTEP_LOCAL_HEADERS -unset GNUSTEP_LOCAL_LIBRARIES -GNUSTEP_MAKEFILES="$CURRENT_GNUSTEP_MAKEFILES" -GNUSTEP_SH_EXPORT_ALL_VARIABLES=yes -. "$CURRENT_GNUSTEP_MAKEFILES/GNUstep.sh" -unset GNUSTEP_SH_EXPORT_ALL_VARIABLES - -# For backwards compatibility, define GNUSTEP_SYSTEM_HEADERS from -# GNUSTEP_SYSTEM_ROOT if not set yet. -if test x"$GNUSTEP_SYSTEM_HEADERS" = x""; then - GNUSTEP_SYSTEM_HEADERS="$GNUSTEP_SYSTEM_ROOT/Library/Headers" -fi - -if test x"$GNUSTEP_SYSTEM_LIBRARIES" = x""; then - GNUSTEP_SYSTEM_LIBRARIES="$GNUSTEP_SYSTEM_ROOT/Library/Libraries" -fi - -if test x"$GNUSTEP_NETWORK_HEADERS" = x""; then - GNUSTEP_NETWORK_HEADERS="$GNUSTEP_NETWORK_ROOT/Library/Headers" -fi - -if test x"$GNUSTEP_NETWORK_LIBRARIES" = x""; then - GNUSTEP_NETWORK_LIBRARIES="$GNUSTEP_NETWORK_ROOT/Library/Libraries" -fi - -if test x"$GNUSTEP_LOCAL_HEADERS" = x""; then - GNUSTEP_LOCAL_HEADERS="$GNUSTEP_LOCAL_ROOT/Library/Headers" -fi - -if test x"$GNUSTEP_LOCAL_LIBRARIES" = x""; then - GNUSTEP_LOCAL_LIBRARIES="$GNUSTEP_LOCAL_ROOT/Library/Libraries" -fi - -if test x"$GNUSTEP_IS_FLATTENED" = x"no"; then - GNUSTEP_SYSTEM_HEADERS="$GNUSTEP_SYSTEM_HEADERS/$LIBRARY_COMBO" - GNUSTEP_NETWORK_HEADERS="$GNUSTEP_NETWORK_HEADERS/$LIBRARY_COMBO" - GNUSTEP_LOCAL_HEADERS="$GNUSTEP_LOCAL_HEADERS/$LIBRARY_COMBO" - # FIXME: Cross-compiling should read the target from the configure - # options and use it. GNUSTEP_TARGET_* variables do not exist in - # this context (so "$GNUSTEP_TARGET_CPU" will always be "") - if test x"$GNUSTEP_TARGET_CPU" = x""; then - GNUSTEP_SYSTEM_LIBRARIES="$GNUSTEP_SYSTEM_LIBRARIES/$GNUSTEP_HOST_CPU/$GNUSTEP_HOST_OS/$LIBRARY_COMBO" - GNUSTEP_NETWORK_LIBRARIES="$GNUSTEP_NETWORK_LIBRARIES/$GNUSTEP_HOST_CPU/$GNUSTEP_HOST_OS/$LIBRARY_COMBO" - GNUSTEP_LOCAL_LIBRARIES="$GNUSTEP_LOCAL_LIBRARIES/$GNUSTEP_HOST_CPU/$GNUSTEP_HOST_OS/$LIBRARY_COMBO" - else - GNUSTEP_SYSTEM_LIBRARIES="$GNUSTEP_SYSTEM_LIBRARIES/$GNUSTEP_TARGET_CPU/$GNUSTEP_TARGET_OS/$LIBRARY_COMBO" - GNUSTEP_NETWORK_LIBRARIES="$GNUSTEP_NETWORK_LIBRARIES/$GNUSTEP_TARGET_CPU/$GNUSTEP_TARGET_OS/$LIBRARY_COMBO" - GNUSTEP_LOCAL_LIBRARIES="$GNUSTEP_LOCAL_LIBRARIES/$GNUSTEP_TARGET_CPU/$GNUSTEP_TARGET_OS/$LIBRARY_COMBO" - fi -fi - -# -# Add standard library and header directories for configure to use to locate -# plain C developer headers/libraries which haver been installed in the -# GNUstep hierarchy. -# -CPPFLAGS="$CPPFLAGS -I$GNUSTEP_SYSTEM_HEADERS -I$GNUSTEP_NETWORK_HEADERS -I$GNUSTEP_LOCAL_HEADERS" -LDFLAGS="$LDFLAGS -L$GNUSTEP_SYSTEM_LIBRARIES -L$GNUSTEP_NETWORK_LIBRARIES -L$GNUSTEP_LOCAL_LIBRARIES" - -#-------------------------------------------------------------------- -# Find the compiler -#-------------------------------------------------------------------- -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:$LINENO: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:$LINENO: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:$LINENO: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:$LINENO: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } - -# Provide some information about the compiler. -$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -{ (ac_try="$ac_compiler --version >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -v >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -v >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -V >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -V >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { (ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi - -{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -if test -z "$ac_file"; then - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: C compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } -fi - -ac_exeext=$ac_cv_exeext - -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } - fi - fi -fi -{ $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } -fi - -rm -f conftest$ac_cv_exeext -{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if test "${ac_cv_objext+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } -fi - -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if test "${ac_cv_c_compiler_gnu+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_compiler_gnu=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_compiler_gnu=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if test "${ac_cv_prog_cc_g+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_cc_g=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - CFLAGS="" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_cc_g=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if test "${ac_cv_prog_cc_c89+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_cc_c89=$ac_arg -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:$LINENO: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:$LINENO: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi - -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi - -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:$LINENO: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi - -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi - -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - -{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if test "${ac_cv_path_GREP+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done -done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} - { (exit 1); exit 1; }; } - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:$LINENO: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if test "${ac_cv_path_EGREP+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done -done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} - { (exit 1); exit 1; }; } - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if test "${ac_cv_header_stdc+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_header_stdc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_header_stdc=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - - -fi -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. - - - - - - - - - -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - - if test "${ac_cv_header_minix_config_h+set}" = set; then - { $as_echo "$as_me:$LINENO: checking for minix/config.h" >&5 -$as_echo_n "checking for minix/config.h... " >&6; } -if test "${ac_cv_header_minix_config_h+set}" = set; then - $as_echo_n "(cached) " >&6 -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5 -$as_echo "$ac_cv_header_minix_config_h" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking minix/config.h usability" >&5 -$as_echo_n "checking minix/config.h usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking minix/config.h presence" >&5 -$as_echo_n "checking minix/config.h presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: minix/config.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: minix/config.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: minix/config.h: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: minix/config.h: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: minix/config.h: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: minix/config.h: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: minix/config.h: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: minix/config.h: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for minix/config.h" >&5 -$as_echo_n "checking for minix/config.h... " >&6; } -if test "${ac_cv_header_minix_config_h+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_header_minix_config_h=$ac_header_preproc -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5 -$as_echo "$ac_cv_header_minix_config_h" >&6; } - -fi -if test "x$ac_cv_header_minix_config_h" = x""yes; then - MINIX=yes -else - MINIX= -fi - - - if test "$MINIX" = yes; then - -cat >>confdefs.h <<\_ACEOF -#define _POSIX_SOURCE 1 -_ACEOF - - -cat >>confdefs.h <<\_ACEOF -#define _POSIX_1_SOURCE 2 -_ACEOF - - -cat >>confdefs.h <<\_ACEOF -#define _MINIX 1 -_ACEOF - - fi - - - - { $as_echo "$as_me:$LINENO: checking whether it is safe to define __EXTENSIONS__" >&5 -$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; } -if test "${ac_cv_safe_to_define___extensions__+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -# define __EXTENSIONS__ 1 - $ac_includes_default -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_safe_to_define___extensions__=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_safe_to_define___extensions__=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_safe_to_define___extensions__" >&5 -$as_echo "$ac_cv_safe_to_define___extensions__" >&6; } - test $ac_cv_safe_to_define___extensions__ = yes && - cat >>confdefs.h <<\_ACEOF -#define __EXTENSIONS__ 1 -_ACEOF - - cat >>confdefs.h <<\_ACEOF -#define _ALL_SOURCE 1 -_ACEOF - - cat >>confdefs.h <<\_ACEOF -#define _GNU_SOURCE 1 -_ACEOF - - cat >>confdefs.h <<\_ACEOF -#define _POSIX_PTHREAD_SEMANTICS 1 -_ACEOF - - cat >>confdefs.h <<\_ACEOF -#define _TANDEM_SOURCE 1 -_ACEOF - - - -MAKECC=`gnustep-config --variable=CC` -if test "$CC" != "$MAKECC"; then - { { $as_echo "$as_me:$LINENO: error: You are running configure with the compiler ($CC) set to a different value from that used by gnustep-make ($MAKECC). Please run configure again with your environment set to match your gnustep-make" >&5 -$as_echo "$as_me: error: You are running configure with the compiler ($CC) set to a different value from that used by gnustep-make ($MAKECC). Please run configure again with your environment set to match your gnustep-make" >&2;} - { (exit 1); exit 1; }; } - exit 1 -fi - -#-------------------------------------------------------------------- -# Check wether the compiler supports UTF-8 constant strings -#-------------------------------------------------------------------- - -GS_EXEC_CHARSET= -GS_INPUT_CHARSET= -# Check whether --enable-unicodeconstants was given. -if test "${enable_unicodeconstants+set}" = set; then - enableval=$enable_unicodeconstants; -fi - -if test "$enable_unicodeconstants" != "no"; then - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - { $as_echo "$as_me:$LINENO: checking whether compiler supports UTF-8 constants in executable" >&5 -$as_echo_n "checking whether compiler supports UTF-8 constants in executable... " >&6; } - saved_CFLAGS="$CFLAGS" - saved_LANG="$LANG" - saved_LC_ALL="$LC_ALL" - export LANG="en_US.ISO-8859-1" - export LC_ALL="en_US.ISO-8859-1" - # We are working in a latin1 locale so we can build a program containing - # a latin1 pound character, and see if the executable has a utf-8 literal. - if test "$cross_compiling" = yes; then - utf8literal_ok=no -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include "$srcdir/config/config.constant-string-encoding.c" -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - utf8literal_ok=yes -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -utf8literal_ok=no -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - - - if test "$utf8literal_ok" = "yes"; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; }; - else - # The compiler did not produce a utf-8 literal ... see if it does so when - # given the appropriate flags to tell it what charactersets to use. - CFLAGS="$CFLAGS -finput-charset=ISO-8859-1 -fexec-charset=UTF-8" - if test "$cross_compiling" = yes; then - utf8literal_ok=no -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include "$srcdir/config/config.constant-string-encoding.c" -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - utf8literal_ok=yes -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -utf8literal_ok=no -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - - - if test "$utf8literal_ok" = "yes"; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; }; - GS_EXEC_CHARSET=-fexec-charset=UTF-8 - GS_INPUT_CHARSET=-finput-charset=UTF-8 - else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; }; - { $as_echo "$as_me:$LINENO: WARNING: Your compiler does not appear to support locales or command line options to control handling of charactersets, so we cannot be sure that the compiled code will contain the UTF-8 string literals expected by gnustep-base. This means that using any source code code containing non US-ASCII text in string literals may give unexpected results (or crashes) at runtime. However, as long as any such literals only use the UTF-8 characterset, this is unlikely to be a problem (since old/faulty compilers are likely to pass the UTF-8 literals through to the compiled code). Please configure using --disable-unicodeconstants to avoid seeing this warning." >&5 -$as_echo "$as_me: WARNING: Your compiler does not appear to support locales or command line options to control handling of charactersets, so we cannot be sure that the compiled code will contain the UTF-8 string literals expected by gnustep-base. This means that using any source code code containing non US-ASCII text in string literals may give unexpected results (or crashes) at runtime. However, as long as any such literals only use the UTF-8 characterset, this is unlikely to be a problem (since old/faulty compilers are likely to pass the UTF-8 literals through to the compiled code). Please configure using --disable-unicodeconstants to avoid seeing this warning." >&2;} - fi - fi - export LANG="$saved_LANG" - export LC_ALL="$saved_LC_ALL" - CFLAGS="$saved_CFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi - - - -#-------------------------------------------------------------------- -# Check how to enable builtins for atomic operations -#-------------------------------------------------------------------- - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -{ $as_echo "$as_me:$LINENO: checking whether the compiler supports atomic operations" >&5 -$as_echo_n "checking whether the compiler supports atomic operations... " >&6; }; - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -typedef int atomic; -int -main () -{ -atomic x; atomic y; __sync_bool_compare_and_swap(&x, y, y + 1); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - have_atomic=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - have_atomic=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext; - if test "$have_atomic" = "yes"; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; }; - -cat >>confdefs.h <<\_ACEOF -#define USE_ATOMIC_BUILTINS 1 -_ACEOF - - else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; }; - if test "$CC" = "gcc"; then - saved_CFLAGS="$CFLAGS"; - ATOMIC_CFLAGS=""; - - # FIXME: Forcing -march=i568 for any i568 or later CPU is a - # stop gap measure to make the compiler emit native assembly - # for atomic operations on i586 or latter processors (GCC by - # default emits code compatible with the original i386 and - # requires library functions to emulate atomic operations). - # When gnustep-make takes care of this kind of target setting, - # the check can safely be removed. - case "$target_cpu" in - i586*|i686*|i786*) - ATOMIC_CFLAGS="-march=i586" - CFLAGS="$saved_CFLAGS $ATOMIC_CFLAGS" - ;; - x86_64) - ATOMIC_CFLAGS="-march=x86-64" - CFLAGS="$saved_CFLAGS $ATOMIC_CFLAGS" - ;; - esac - { $as_echo "$as_me:$LINENO: checking whether gcc supports atomic operations with -march" >&5 -$as_echo_n "checking whether gcc supports atomic operations with -march... " >&6; }; - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -typedef int atomic; -int -main () -{ -atomic x; atomic y; __sync_bool_compare_and_swap(&x, y, y+1); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - need_march=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - need_march=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext; - - if test "$need_march" = "yes"; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; }; - OBJCFLAGS="$OBJCFLAGS $ATOMIC_CFLAGS"; - -cat >>confdefs.h <<\_ACEOF -#define USE_ATOMIC_BUILTINS 1 -_ACEOF - - else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; }; - saved_LDFLAGS="$LDFLAGS"; - LDFLAGS="$saved_LDFLAGS -lgcc"; - { $as_echo "$as_me:$LINENO: checking whether gcc supports atomic operations using libgcc" >&5 -$as_echo_n "checking whether gcc supports atomic operations using libgcc... " >&6; }; - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -typedef int atomic; -int -main () -{ -atomic x; atomic y; __sync_bool_compare_and_swap(&x, y, y+1); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - atomic_in_libgcc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - atomic_in_libgcc=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext; - if test "$atomic_in_libgcc" = "yes"; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; }; - LIBS="$LIBS -lgcc"; - -cat >>confdefs.h <<\_ACEOF -#define USE_ATOMIC_BUILTINS 1 -_ACEOF - - else - LDFLAGS="$saved_LDFLAGS"; - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; }; - fi - fi - fi - fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - -# Extract the first word of "whoami", so it can be a program name with args. -set dummy whoami; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_WHOAMI+set}" = set; then - $as_echo_n "(cached) " >&6 -else - case $WHOAMI in - [\\/]* | ?:[\\/]*) - ac_cv_path_WHOAMI="$WHOAMI" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_dummy="$PATH:/usr/ucb" -for as_dir in $as_dummy -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_WHOAMI="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - - test -z "$ac_cv_path_WHOAMI" && ac_cv_path_WHOAMI="echo" - ;; -esac -fi -WHOAMI=$ac_cv_path_WHOAMI -if test -n "$WHOAMI"; then - { $as_echo "$as_me:$LINENO: result: $WHOAMI" >&5 -$as_echo "$WHOAMI" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - -# Extract the first word of "pkg-config", so it can be a program name with args. -set dummy pkg-config; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_PKGCONFIG+set}" = set; then - $as_echo_n "(cached) " >&6 -else - case $PKGCONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_PKGCONFIG="$PKGCONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in no -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_PKGCONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - - test -z "$ac_cv_path_PKGCONFIG" && ac_cv_path_PKGCONFIG="yes" - ;; -esac -fi -PKGCONFIG=$ac_cv_path_PKGCONFIG -if test -n "$PKGCONFIG"; then - { $as_echo "$as_me:$LINENO: result: $PKGCONFIG" >&5 -$as_echo "$PKGCONFIG" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - - -#-------------------------------------------------------------------- -# specific target_os options -#-------------------------------------------------------------------- -INCLUDE_FLAGS="$CPPFLAGS" -LDIR_FLAGS="$LDFLAGS" -# This is just for configuring. Later, in config.make, INCLUDE_FLAGS -# goes in CONFIG_SYSTEM_INCL and LIBS goes in CONFIG_SYSTEM_LIBS -case "$target_os" in - freebsd* | openbsd* ) - CPPFLAGS="$CPPFLAGS -I/usr/local/include" - LDFLAGS="$LDFLAGS -L/usr/local/lib";; - netbsd*) CPPFLAGS="$CPPFLAGS -I/usr/pkg/include" - LDFLAGS="$LDFLAGS -Wl,-R/usr/pkg/lib -L/usr/pkg/lib";; -esac - -#-------------------------------------------------------------------- -# Set Apple/Darwin/OSX/NeXT information for other tests -#-------------------------------------------------------------------- -OBJC_WITH_GC=no -OBJC_RUNTIME_LIB=`echo $LIBRARY_COMBO | tr '-' ' ' | awk '{print $1}'` -{ $as_echo "$as_me:$LINENO: checking the Objective-C runtime" >&5 -$as_echo_n "checking the Objective-C runtime... " >&6; } -if test "$OBJC_RUNTIME_LIB" = "nx" -o "$OBJC_RUNTIME_LIB" = "apple"; then - { $as_echo "$as_me:$LINENO: result: NeXT" >&5 -$as_echo "NeXT" >&6; } - OBJCFLAGS="$OBJCFLAGS -fnext-runtime -DNeXT_RUNTIME" -elif test "$OBJC_RUNTIME_LIB" = "gnugc"; then - { $as_echo "$as_me:$LINENO: result: GNU" >&5 -$as_echo "GNU" >&6; } - OBJCFLAGS="$OBJCFLAGS -fgnu-runtime" - OBJC_WITH_GC=yes -else - { $as_echo "$as_me:$LINENO: result: GNU" >&5 -$as_echo "GNU" >&6; } - OBJCFLAGS="$OBJCFLAGS -fgnu-runtime" -fi -LIBOBJC=`gnustep-config --objc-libs` -if test "$LIBOBJC" = ""; then - { { $as_echo "$as_me:$LINENO: error: The command 'gnustep-config --objc-libs' (provided by the gnustep-make package) returned no Objective-C library. Unable to continue configuring without Objective-C support." >&5 -$as_echo "$as_me: error: The command 'gnustep-config --objc-libs' (provided by the gnustep-make package) returned no Objective-C library. Unable to continue configuring without Objective-C support." >&2;} - { (exit 1); exit 1; }; } - exit 1 -fi - -#-------------------------------------------------------------------- -# Miscellaneous flags -#-------------------------------------------------------------------- - -# Check to see if the libobjc library is in our GNUSTEP_SYSTEM_LIBRARIES. -# If so, there are probably other libraries that we want there also, so -# leave the proper includes in CPPFLAGS and LDFLAGS -{ $as_echo "$as_me:$LINENO: checking for custom shared objc library" >&5 -$as_echo_n "checking for custom shared objc library... " >&6; } -if test "${gs_cv_objc_libdir+set}" = set; then - $as_echo_n "(cached) " >&6 -else - gs_cv_objc_libdir=NONE -gs_cv_objc_incdir=NONE -# Try GNUSTEP_SYSTEM_LIBRARIES first -if test "$GNUSTEP_IS_FLATTENED" = yes; then - GNUSTEP_LDIR="$GNUSTEP_SYSTEM_LIBRARIES" - GNUSTEP_HDIR="$GNUSTEP_SYSTEM_HEADERS" -else - GNUSTEP_LDIR="$GNUSTEP_SYSTEM_LIBRARIES/$obj_dir" - GNUSTEP_HDIR="$GNUSTEP_SYSTEM_HEADERS/$LIBRARY_COMBO" -fi - -if test -f "$GNUSTEP_HDIR/objc/objc.h"; then - if test -f "$GNUSTEP_LDIR/libobjc.a" -o -f "$GNUSTEP_LDIR/libobjc.so" -o -f "$GNUSTEP_LDIR/libobjc.dll.a" -o -f "$GNUSTEP_LDIR/libobjc-gnu.dylib" -o -f "$GNUSTEP_LDIR/libobjc_gc.a" -o -f "$GNUSTEP_LDIR/libobjc_gc.so" -o -f "$GNUSTEP_LDIR/libobjc_gc.dll.a" -o -f "$GNUSTEP_LDIR/libobjc_gc-gnu.dylib"; then - gs_cv_objc_libdir="$GNUSTEP_LDIR" - gs_cv_objc_incdir="$GNUSTEP_HDIR" - fi -fi - -# Try GNUSTEP_NETWORK_LIBRARIES second (override GNUSTEP_SYSTEM if -# found) -if test "$GNUSTEP_IS_FLATTENED" = yes; then - GNUSTEP_LDIR="$GNUSTEP_NETWORK_LIBRARIES" - GNUSTEP_HDIR="$GNUSTEP_NETWORK_HEADERS" -else - GNUSTEP_LDIR="$GNUSTEP_NETWORK_LIBRARIES/$obj_dir" - GNUSTEP_HDIR="$GNUSTEP_NETWORK_HEADERS/$LIBRARY_COMBO" -fi - -if test -f "$GNUSTEP_HDIR/objc/objc.h"; then - if test -f "$GNUSTEP_LDIR/libobjc.a" -o -f "$GNUSTEP_LDIR/libobjc.so" -o -f "$GNUSTEP_LDIR/libobjc.dll.a" -o -f "$GNUSTEP_LDIR/libobjc-gnu.dylib" -o -f "$GNUSTEP_LDIR/libobjc_gc.a" -o -f "$GNUSTEP_LDIR/libobjc_gc.so" -o -f "$GNUSTEP_LDIR/libobjc_gc.dll.a" -o -f "$GNUSTEP_LDIR/libobjc_gc-gnu.dylib"; then - gs_cv_objc_libdir="$GNUSTEP_LDIR" - gs_cv_objc_incdir="$GNUSTEP_HDIR" - fi -fi - -# Try GNUSTEP_LOCAL_LIBRARIES third (override GNUSTEP_SYSTEM and -# GNUSTEP_NETWORK if found) -if test "$GNUSTEP_IS_FLATTENED" = yes; then - GNUSTEP_LDIR="$GNUSTEP_LOCAL_LIBRARIES" - GNUSTEP_HDIR="$GNUSTEP_LOCAL_HEADERS" -else - GNUSTEP_LDIR="$GNUSTEP_LOCAL_LIBRARIES/$obj_dir" - GNUSTEP_HDIR="$GNUSTEP_LOCAL_HEADERS/$LIBRARY_COMBO" -fi - -if test -f "$GNUSTEP_HDIR/objc/objc.h"; then - if test -f "$GNUSTEP_LDIR/libobjc.a" -o -f "$GNUSTEP_LDIR/libobjc.so" -o -f "$GNUSTEP_LDIR/libobjc.dll.a" -o -f "$GNUSTEP_LDIR/libobjc-gnu.dylib" -o -f "$GNUSTEP_LDIR/libobjc_gc.a" -o -f "$GNUSTEP_LDIR/libobjc_gc.so" -o -f "$GNUSTEP_LDIR/libobjc_gc.dll.a" -o -f "$GNUSTEP_LDIR/libobjc_gc-gnu.dylib"; then - gs_cv_objc_libdir="$GNUSTEP_LDIR" - gs_cv_objc_incdir="$GNUSTEP_HDIR" - fi -fi - -fi - -{ $as_echo "$as_me:$LINENO: result: $gs_cv_objc_libdir" >&5 -$as_echo "$gs_cv_objc_libdir" >&6; } - -if test "$gs_cv_objc_libdir" != "NONE"; then - # - # The following one is so that headers of custom libraries into - # $GNUSTEP_HDIR are used before the standard ones - # - INCLUDE_FLAGS="$INCLUDE_FLAGS -I$gs_cv_objc_incdir" - LDIR_FLAGS="$LDIR_FLAGS -L$gs_cv_objc_libdir/$LIBRARY_COMBO -L$gs_cv_objc_libdir" - CPPFLAGS="$CPPFLAGS -I$gs_cv_objc_incdir" - LDFLAGS="$LDFLAGS -L$gs_cv_objc_libdir" -fi - -#-------------------------------------------------------------------- -# Check if Objective-C is installed -#-------------------------------------------------------------------- - -for ac_header in objc/runtime.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -for ac_header in objc/objc.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - -if test $ac_cv_header_objc_objc_h = no; then - echo "Check to make sure you have a full installation of the GCC" - echo "compiler that includes the Objective-C headers and libraries" - { { $as_echo "$as_me:$LINENO: error: Could not find Objective-C headers" >&5 -$as_echo "$as_me: error: Could not find Objective-C headers" >&2;} - { (exit 1); exit 1; }; } -fi - -if test $OBJC_WITH_GC = yes; then - -for ac_header in gc/gc.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - gc_ok=yes -else - gc_ok=no -fi - -done - - if test "$gc_ok" = no; then - { { $as_echo "$as_me:$LINENO: error: Garbage collection was required, but the gc/gc.h header couldn't be found." >&5 -$as_echo "$as_me: error: Garbage collection was required, but the gc/gc.h header couldn't be found." >&2;} - { (exit 1); exit 1; }; } - fi - saved_LIBS="$LIBS" - LIBS+=" -lgc" - { $as_echo "$as_me:$LINENO: checking for GC_malloc" >&5 -$as_echo_n "checking for GC_malloc... " >&6; } -if test "${ac_cv_func_GC_malloc+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define GC_malloc to an innocuous variant, in case declares GC_malloc. - For example, HP-UX 11i declares gettimeofday. */ -#define GC_malloc innocuous_GC_malloc - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char GC_malloc (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef GC_malloc - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char GC_malloc (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_GC_malloc || defined __stub___GC_malloc -choke me -#endif - -int -main () -{ -return GC_malloc (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_func_GC_malloc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_func_GC_malloc=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_GC_malloc" >&5 -$as_echo "$ac_cv_func_GC_malloc" >&6; } -if test "x$ac_cv_func_GC_malloc" = x""yes; then - gc_ok=yes -else - gc_ok=no -fi - - if test "$gc_ok" = no; then - { { $as_echo "$as_me:$LINENO: error: Garbage collection was required, but the gc library couldn't be found." >&5 -$as_echo "$as_me: error: Garbage collection was required, but the gc library couldn't be found." >&2;} - { (exit 1); exit 1; }; } - fi - { $as_echo "$as_me:$LINENO: checking for GC_register_my_thread" >&5 -$as_echo_n "checking for GC_register_my_thread... " >&6; } -if test "${ac_cv_func_GC_register_my_thread+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define GC_register_my_thread to an innocuous variant, in case declares GC_register_my_thread. - For example, HP-UX 11i declares gettimeofday. */ -#define GC_register_my_thread innocuous_GC_register_my_thread - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char GC_register_my_thread (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef GC_register_my_thread - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char GC_register_my_thread (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_GC_register_my_thread || defined __stub___GC_register_my_thread -choke me -#endif - -int -main () -{ -return GC_register_my_thread (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_func_GC_register_my_thread=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_func_GC_register_my_thread=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_GC_register_my_thread" >&5 -$as_echo "$ac_cv_func_GC_register_my_thread" >&6; } - - if test "$ac_cv_func_GC_register_my_thread" = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_GC_REGISTER_MY_THREAD 1 -_ACEOF - - fi - { $as_echo "$as_me:$LINENO: checking for GC_allow_register_threads" >&5 -$as_echo_n "checking for GC_allow_register_threads... " >&6; } -if test "${ac_cv_func_GC_allow_register_threads+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define GC_allow_register_threads to an innocuous variant, in case declares GC_allow_register_threads. - For example, HP-UX 11i declares gettimeofday. */ -#define GC_allow_register_threads innocuous_GC_allow_register_threads - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char GC_allow_register_threads (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef GC_allow_register_threads - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char GC_allow_register_threads (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_GC_allow_register_threads || defined __stub___GC_allow_register_threads -choke me -#endif - -int -main () -{ -return GC_allow_register_threads (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_func_GC_allow_register_threads=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_func_GC_allow_register_threads=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_GC_allow_register_threads" >&5 -$as_echo "$ac_cv_func_GC_allow_register_threads" >&6; } - - if test "$ac_cv_func_GC_allow_register_threads" = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_GC_ALLOW_REGISTER_THREADS 1 -_ACEOF - - fi - LIBS="-lobjc_gc -ldl" - { $as_echo "$as_me:$LINENO: checking for class_ivar_set_gcinvisible" >&5 -$as_echo_n "checking for class_ivar_set_gcinvisible... " >&6; } -if test "${ac_cv_func_class_ivar_set_gcinvisible+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define class_ivar_set_gcinvisible to an innocuous variant, in case declares class_ivar_set_gcinvisible. - For example, HP-UX 11i declares gettimeofday. */ -#define class_ivar_set_gcinvisible innocuous_class_ivar_set_gcinvisible - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char class_ivar_set_gcinvisible (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef class_ivar_set_gcinvisible - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char class_ivar_set_gcinvisible (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_class_ivar_set_gcinvisible || defined __stub___class_ivar_set_gcinvisible -choke me -#endif - -int -main () -{ -return class_ivar_set_gcinvisible (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_func_class_ivar_set_gcinvisible=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_func_class_ivar_set_gcinvisible=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_class_ivar_set_gcinvisible" >&5 -$as_echo "$ac_cv_func_class_ivar_set_gcinvisible" >&6; } -if test "x$ac_cv_func_class_ivar_set_gcinvisible" = x""yes; then - gc_ok=yes -else - gc_ok=no -fi - - if test "$gc_ok" = no; then - { { $as_echo "$as_me:$LINENO: error: Garbage collection was required, but the gc runtime couldn't be found." >&5 -$as_echo "$as_me: error: Garbage collection was required, but the gc runtime couldn't be found." >&2;} - { (exit 1); exit 1; }; } - fi - LIBS="$saved_LIBS" - -fi - -#-------------------------------------------------------------------- -# Check for strange network stuff used by gdomap -#-------------------------------------------------------------------- -{ $as_echo "$as_me:$LINENO: for gdomap network details" >&5 -$as_echo "$as_me: for gdomap network details" >&6;} -{ $as_echo "$as_me:$LINENO: checking for variable length socket addresses" >&5 -$as_echo_n "checking for variable length socket addresses... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - - #include - #include - #include - -int -main () -{ -struct ifreq s; s.ifr_addr.sa_len = 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - sa_len=1 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - sa_len=0 -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -if test $sa_len = 1; then - { $as_echo "$as_me:$LINENO: result: found" >&5 -$as_echo "found" >&6; } - -cat >>confdefs.h <<\_ACEOF -#define HAVE_SA_LEN 1 -_ACEOF - -else - { $as_echo "$as_me:$LINENO: result: not found" >&5 -$as_echo "not found" >&6; } -fi - -{ $as_echo "$as_me:$LINENO: checking for gcc visibility attribute support" >&5 -$as_echo_n "checking for gcc visibility attribute support... " >&6; } -saved_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS -Werror" -cat >conftest.$ac_ext <<_ACEOF - - #include - int foo() __attribute__ ((visibility("internal"))); - int foo(){ return 1; } - int main(){ return foo(); } -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - { $as_echo "$as_me:$LINENO: result: found" >&5 -$as_echo "found" >&6; } - gs_visibility=1 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - { $as_echo "$as_me:$LINENO: result: not present" >&5 -$as_echo "not present" >&6; } - gs_visibility=0 - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -cat >>confdefs.h <<_ACEOF -#define HAVE_VISIBILITY_ATTRIBUTE $gs_visibility -_ACEOF - -CFLAGS="$saved_CFLAGS" - - -#-------------------------------------------------------------------- -# Check if system has buggy SO_REUSEADDR -#-------------------------------------------------------------------- -{ $as_echo "$as_me:$LINENO: checking whether SO_REUSEADDR is broken" >&5 -$as_echo_n "checking whether SO_REUSEADDR is broken... " >&6; } -if test "$cross_compiling" = yes; then - reuseaddr_ok=0 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include "$srcdir/config/config.reuseaddr.c" -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - reuseaddr_ok=1 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -reuseaddr_ok=0 -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - - -if test $reuseaddr_ok = 0; then - -cat >>confdefs.h <<\_ACEOF -#define BROKEN_SO_REUSEADDR 1 -_ACEOF - - echo - echo "The SO_REUSEADDR socket option for controlling re-use of network" - echo "sockets immediately after shutdown appears to be broken on this" - echo "machine. Networking code will be built without using this" - echo "feature." - echo "The effect of this lack is that when a network service is shut" - echo "down, it cannot be re-started on the same network port until" - echo "an operating-system timeout has expired." - echo "For servers other than gdomap, GNUstep does not normally need" - echo "a particular network port, so the problem is unlikely to arise." - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - -#-------------------------------------------------------------------- -# Check for thread flags for libobjc. -#-------------------------------------------------------------------- -# -{ $as_echo "$as_me:$LINENO: checking for objc threading flags" >&5 -$as_echo_n "checking for objc threading flags... " >&6; } -# -# Get them from gnustep-make which contains the real code to get them -# -objc_threaded=`grep objc_threaded: $CURRENT_GNUSTEP_MAKEFILES/$lobj_dir/config.make | sed -e 's/objc_threaded:=//'` -# -{ $as_echo "$as_me:$LINENO: result: $objc_threaded" >&5 -$as_echo "$objc_threaded" >&6; } - -#-------------------------------------------------------------------- -# Byte order information needed for foundation headers. -#-------------------------------------------------------------------- - - { $as_echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 -$as_echo_n "checking whether byte ordering is bigendian... " >&6; } -if test "${ac_cv_c_bigendian+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_c_bigendian=unknown - # See if we're dealing with a universal compiler. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifndef __APPLE_CC__ - not a universal capable compiler - #endif - typedef int dummy; - -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - - # Check for potential -arch flags. It is not universal unless - # there are some -arch flags. Note that *ppc* also matches - # ppc64. This check is also rather less than ideal. - case "${CC} ${CFLAGS} ${CPPFLAGS} ${LDFLAGS}" in #( - *-arch*ppc*|*-arch*i386*|*-arch*x86_64*) ac_cv_c_bigendian=universal;; - esac -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - if test $ac_cv_c_bigendian = unknown; then - # See if sys/param.h defines the BYTE_ORDER macro. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - #include - -int -main () -{ -#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \ - && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \ - && LITTLE_ENDIAN) - bogus endian macros - #endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - # It does; now see whether it defined to BIG_ENDIAN or not. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - #include - -int -main () -{ -#if BYTE_ORDER != BIG_ENDIAN - not big endian - #endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_c_bigendian=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_c_bigendian=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi - if test $ac_cv_c_bigendian = unknown; then - # See if defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris). - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -int -main () -{ -#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN) - bogus endian macros - #endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - # It does; now see whether it defined to _BIG_ENDIAN or not. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -int -main () -{ -#ifndef _BIG_ENDIAN - not big endian - #endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_c_bigendian=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_c_bigendian=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi - if test $ac_cv_c_bigendian = unknown; then - # Compile a test program. - if test "$cross_compiling" = yes; then - # Try to guess by grepping values from an object file. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -short int ascii_mm[] = - { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; - short int ascii_ii[] = - { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; - int use_ascii (int i) { - return ascii_mm[i] + ascii_ii[i]; - } - short int ebcdic_ii[] = - { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; - short int ebcdic_mm[] = - { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; - int use_ebcdic (int i) { - return ebcdic_mm[i] + ebcdic_ii[i]; - } - extern int foo; - -int -main () -{ -return use_ascii (foo) == use_ebcdic (foo); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then - ac_cv_c_bigendian=yes - fi - if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then - if test "$ac_cv_c_bigendian" = unknown; then - ac_cv_c_bigendian=no - else - # finding both strings is unlikely to happen, but who knows? - ac_cv_c_bigendian=unknown - fi - fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ - - /* Are we little or big endian? From Harbison&Steele. */ - union - { - long int l; - char c[sizeof (long int)]; - } u; - u.l = 1; - return u.c[sizeof (long int) - 1] == 1; - - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_c_bigendian=no -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_c_bigendian=yes -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - - - fi -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 -$as_echo "$ac_cv_c_bigendian" >&6; } - case $ac_cv_c_bigendian in #( - yes) - cat >>confdefs.h <<\_ACEOF -#define WORDS_BIGENDIAN 1 -_ACEOF -;; #( - no) - ;; #( - universal) - -cat >>confdefs.h <<\_ACEOF -#define AC_APPLE_UNIVERSAL_BUILD 1 -_ACEOF - - ;; #( - *) - { { $as_echo "$as_me:$LINENO: error: unknown endianness - presetting ac_cv_c_bigendian=no (or yes) will help" >&5 -$as_echo "$as_me: error: unknown endianness - presetting ac_cv_c_bigendian=no (or yes) will help" >&2;} - { (exit 1); exit 1; }; } ;; - esac - -if test $ac_cv_c_bigendian = yes; then - GS_WORDS_BIGENDIAN=1 -else - GS_WORDS_BIGENDIAN=0 -fi - - -#-------------------------------------------------------------------- -# Type size information needed for foundation headers. -#-------------------------------------------------------------------- -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:$LINENO: checking size of void*" >&5 -$as_echo_n "checking size of void*... " >&6; } -if test "${ac_cv_sizeof_voidp+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (void*))) >= 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=0 ac_mid=0 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (void*))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr $ac_mid + 1` - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (void*))) < 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=-1 ac_mid=-1 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (void*))) >= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_hi=`expr '(' $ac_mid ')' - 1` - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo= ac_hi= -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (void*))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr '(' $ac_mid ')' + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in -?*) ac_cv_sizeof_voidp=$ac_lo;; -'') if test "$ac_cv_type_voidp" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (void*) -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute sizeof (void*) -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_sizeof_voidp=0 - fi ;; -esac -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -static long int longval () { return (long int) (sizeof (void*)); } -static unsigned long int ulongval () { return (long int) (sizeof (void*)); } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - return 1; - if (((long int) (sizeof (void*))) < 0) - { - long int i = longval (); - if (i != ((long int) (sizeof (void*)))) - return 1; - fprintf (f, "%ld", i); - } - else - { - unsigned long int i = ulongval (); - if (i != ((long int) (sizeof (void*)))) - return 1; - fprintf (f, "%lu", i); - } - /* Do not output a trailing newline, as this causes \r\n confusion - on some platforms. */ - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_sizeof_voidp=`cat conftest.val` -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -if test "$ac_cv_type_voidp" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (void*) -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute sizeof (void*) -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_sizeof_voidp=0 - fi -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.val -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_voidp" >&5 -$as_echo "$ac_cv_sizeof_voidp" >&6; } - - - -cat >>confdefs.h <<_ACEOF -#define SIZEOF_VOIDP $ac_cv_sizeof_voidp -_ACEOF - - - -GS_SINT8="signed char" -GS_UINT8="unsigned char" - - - -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:$LINENO: checking size of short" >&5 -$as_echo_n "checking size of short... " >&6; } -if test "${ac_cv_sizeof_short+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (short))) >= 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=0 ac_mid=0 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (short))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr $ac_mid + 1` - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (short))) < 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=-1 ac_mid=-1 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (short))) >= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_hi=`expr '(' $ac_mid ')' - 1` - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo= ac_hi= -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (short))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr '(' $ac_mid ')' + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in -?*) ac_cv_sizeof_short=$ac_lo;; -'') if test "$ac_cv_type_short" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (short) -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute sizeof (short) -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_sizeof_short=0 - fi ;; -esac -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -static long int longval () { return (long int) (sizeof (short)); } -static unsigned long int ulongval () { return (long int) (sizeof (short)); } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - return 1; - if (((long int) (sizeof (short))) < 0) - { - long int i = longval (); - if (i != ((long int) (sizeof (short)))) - return 1; - fprintf (f, "%ld", i); - } - else - { - unsigned long int i = ulongval (); - if (i != ((long int) (sizeof (short)))) - return 1; - fprintf (f, "%lu", i); - } - /* Do not output a trailing newline, as this causes \r\n confusion - on some platforms. */ - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_sizeof_short=`cat conftest.val` -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -if test "$ac_cv_type_short" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (short) -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute sizeof (short) -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_sizeof_short=0 - fi -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.val -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_short" >&5 -$as_echo "$ac_cv_sizeof_short" >&6; } - - - -cat >>confdefs.h <<_ACEOF -#define SIZEOF_SHORT $ac_cv_sizeof_short -_ACEOF - - - - -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:$LINENO: checking size of int" >&5 -$as_echo_n "checking size of int... " >&6; } -if test "${ac_cv_sizeof_int+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (int))) >= 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=0 ac_mid=0 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (int))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr $ac_mid + 1` - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (int))) < 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=-1 ac_mid=-1 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (int))) >= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_hi=`expr '(' $ac_mid ')' - 1` - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo= ac_hi= -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (int))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr '(' $ac_mid ')' + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in -?*) ac_cv_sizeof_int=$ac_lo;; -'') if test "$ac_cv_type_int" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (int) -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute sizeof (int) -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_sizeof_int=0 - fi ;; -esac -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -static long int longval () { return (long int) (sizeof (int)); } -static unsigned long int ulongval () { return (long int) (sizeof (int)); } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - return 1; - if (((long int) (sizeof (int))) < 0) - { - long int i = longval (); - if (i != ((long int) (sizeof (int)))) - return 1; - fprintf (f, "%ld", i); - } - else - { - unsigned long int i = ulongval (); - if (i != ((long int) (sizeof (int)))) - return 1; - fprintf (f, "%lu", i); - } - /* Do not output a trailing newline, as this causes \r\n confusion - on some platforms. */ - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_sizeof_int=`cat conftest.val` -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -if test "$ac_cv_type_int" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (int) -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute sizeof (int) -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_sizeof_int=0 - fi -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.val -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_int" >&5 -$as_echo "$ac_cv_sizeof_int" >&6; } - - - -cat >>confdefs.h <<_ACEOF -#define SIZEOF_INT $ac_cv_sizeof_int -_ACEOF - - - - -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:$LINENO: checking size of long" >&5 -$as_echo_n "checking size of long... " >&6; } -if test "${ac_cv_sizeof_long+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (long))) >= 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=0 ac_mid=0 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (long))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr $ac_mid + 1` - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (long))) < 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=-1 ac_mid=-1 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (long))) >= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_hi=`expr '(' $ac_mid ')' - 1` - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo= ac_hi= -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (long))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr '(' $ac_mid ')' + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in -?*) ac_cv_sizeof_long=$ac_lo;; -'') if test "$ac_cv_type_long" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (long) -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute sizeof (long) -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_sizeof_long=0 - fi ;; -esac -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -static long int longval () { return (long int) (sizeof (long)); } -static unsigned long int ulongval () { return (long int) (sizeof (long)); } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - return 1; - if (((long int) (sizeof (long))) < 0) - { - long int i = longval (); - if (i != ((long int) (sizeof (long)))) - return 1; - fprintf (f, "%ld", i); - } - else - { - unsigned long int i = ulongval (); - if (i != ((long int) (sizeof (long)))) - return 1; - fprintf (f, "%lu", i); - } - /* Do not output a trailing newline, as this causes \r\n confusion - on some platforms. */ - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_sizeof_long=`cat conftest.val` -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -if test "$ac_cv_type_long" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (long) -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute sizeof (long) -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_sizeof_long=0 - fi -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.val -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_long" >&5 -$as_echo "$ac_cv_sizeof_long" >&6; } - - - -cat >>confdefs.h <<_ACEOF -#define SIZEOF_LONG $ac_cv_sizeof_long -_ACEOF - - - - -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:$LINENO: checking size of long long" >&5 -$as_echo_n "checking size of long long... " >&6; } -if test "${ac_cv_sizeof_long_long+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (long long))) >= 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=0 ac_mid=0 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (long long))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr $ac_mid + 1` - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (long long))) < 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=-1 ac_mid=-1 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (long long))) >= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_hi=`expr '(' $ac_mid ')' - 1` - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo= ac_hi= -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (long long))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr '(' $ac_mid ')' + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in -?*) ac_cv_sizeof_long_long=$ac_lo;; -'') if test "$ac_cv_type_long_long" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (long long) -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute sizeof (long long) -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_sizeof_long_long=0 - fi ;; -esac -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -static long int longval () { return (long int) (sizeof (long long)); } -static unsigned long int ulongval () { return (long int) (sizeof (long long)); } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - return 1; - if (((long int) (sizeof (long long))) < 0) - { - long int i = longval (); - if (i != ((long int) (sizeof (long long)))) - return 1; - fprintf (f, "%ld", i); - } - else - { - unsigned long int i = ulongval (); - if (i != ((long int) (sizeof (long long)))) - return 1; - fprintf (f, "%lu", i); - } - /* Do not output a trailing newline, as this causes \r\n confusion - on some platforms. */ - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_sizeof_long_long=`cat conftest.val` -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -if test "$ac_cv_type_long_long" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (long long) -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute sizeof (long long) -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_sizeof_long_long=0 - fi -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.val -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_long_long" >&5 -$as_echo "$ac_cv_sizeof_long_long" >&6; } - - - -cat >>confdefs.h <<_ACEOF -#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long -_ACEOF - - - - -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:$LINENO: checking size of float" >&5 -$as_echo_n "checking size of float... " >&6; } -if test "${ac_cv_sizeof_float+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (float))) >= 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=0 ac_mid=0 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (float))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr $ac_mid + 1` - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (float))) < 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=-1 ac_mid=-1 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (float))) >= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_hi=`expr '(' $ac_mid ')' - 1` - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo= ac_hi= -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (float))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr '(' $ac_mid ')' + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in -?*) ac_cv_sizeof_float=$ac_lo;; -'') if test "$ac_cv_type_float" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (float) -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute sizeof (float) -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_sizeof_float=0 - fi ;; -esac -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -static long int longval () { return (long int) (sizeof (float)); } -static unsigned long int ulongval () { return (long int) (sizeof (float)); } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - return 1; - if (((long int) (sizeof (float))) < 0) - { - long int i = longval (); - if (i != ((long int) (sizeof (float)))) - return 1; - fprintf (f, "%ld", i); - } - else - { - unsigned long int i = ulongval (); - if (i != ((long int) (sizeof (float)))) - return 1; - fprintf (f, "%lu", i); - } - /* Do not output a trailing newline, as this causes \r\n confusion - on some platforms. */ - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_sizeof_float=`cat conftest.val` -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -if test "$ac_cv_type_float" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (float) -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute sizeof (float) -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_sizeof_float=0 - fi -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.val -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_float" >&5 -$as_echo "$ac_cv_sizeof_float" >&6; } - - - -cat >>confdefs.h <<_ACEOF -#define SIZEOF_FLOAT $ac_cv_sizeof_float -_ACEOF - - - - -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:$LINENO: checking size of double" >&5 -$as_echo_n "checking size of double... " >&6; } -if test "${ac_cv_sizeof_double+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (double))) >= 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=0 ac_mid=0 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (double))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr $ac_mid + 1` - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (double))) < 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=-1 ac_mid=-1 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (double))) >= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_hi=`expr '(' $ac_mid ')' - 1` - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo= ac_hi= -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (double))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr '(' $ac_mid ')' + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in -?*) ac_cv_sizeof_double=$ac_lo;; -'') if test "$ac_cv_type_double" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (double) -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute sizeof (double) -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_sizeof_double=0 - fi ;; -esac -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -static long int longval () { return (long int) (sizeof (double)); } -static unsigned long int ulongval () { return (long int) (sizeof (double)); } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - return 1; - if (((long int) (sizeof (double))) < 0) - { - long int i = longval (); - if (i != ((long int) (sizeof (double)))) - return 1; - fprintf (f, "%ld", i); - } - else - { - unsigned long int i = ulongval (); - if (i != ((long int) (sizeof (double)))) - return 1; - fprintf (f, "%lu", i); - } - /* Do not output a trailing newline, as this causes \r\n confusion - on some platforms. */ - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_sizeof_double=`cat conftest.val` -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -if test "$ac_cv_type_double" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (double) -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute sizeof (double) -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_sizeof_double=0 - fi -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.val -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_double" >&5 -$as_echo "$ac_cv_sizeof_double" >&6; } - - - -cat >>confdefs.h <<_ACEOF -#define SIZEOF_DOUBLE $ac_cv_sizeof_double -_ACEOF - - - - - -if test $ac_cv_sizeof_voidp = $ac_cv_sizeof_int; then - GS_SADDR="int" - GS_UADDR="unsigned int" -else - if test $ac_cv_sizeof_voidp = $ac_cv_sizeof_long; then - GS_SADDR="long" - GS_UADDR="unsigned long" - else - if test $ac_cv_sizeof_voidp = $ac_cv_sizeof_long_long; then - GS_SADDR="long long" - GS_UADDR="unsigned long long" - else - { { $as_echo "$as_me:$LINENO: error: Unable to find integer of same size as void*" >&5 -$as_echo "$as_me: error: Unable to find integer of same size as void*" >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi - - - -if test $ac_cv_sizeof_short = 2; then - GS_SINT16="signed short" - GS_UINT16="unsigned short" -else - if test $ac_cv_sizeof_int = 2; then - GS_SINT16="signed int" - GS_UINT16="unsigned int" - else - { { $as_echo "$as_me:$LINENO: error: Unable to determine type for 16-bit integer" >&5 -$as_echo "$as_me: error: Unable to determine type for 16-bit integer" >&2;} - { (exit 1); exit 1; }; } - fi -fi - - - -if test $ac_cv_sizeof_int = 4; then - GS_SINT32="signed int" - GS_UINT32="unsigned int" -else - if test $ac_cv_sizeof_long = 4; then - GS_SINT32="signed long" - GS_UINT32="unsigned long" - else - if test $ac_cv_sizeof_short = 4; then - GS_SINT32="signed short" - GS_UINT32="unsigned short" - else - { { $as_echo "$as_me:$LINENO: error: Unable to determine type for 32-bit integer" >&5 -$as_echo "$as_me: error: Unable to determine type for 32-bit integer" >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi - - - -GS_HAVE_I64=1 -if test $ac_cv_sizeof_int = 8; then - GS_SINT64="signed int" - GS_UINT64="unsigned int" -else - if test $ac_cv_sizeof_long = 8; then - GS_SINT64="signed long" - GS_UINT64="unsigned long" - else - if test $ac_cv_sizeof_long_long = 8; then - GS_SINT64="signed long long" - GS_UINT64="unsigned long long" - else -# 64-bit ints not supported - but we need a dummy type for byte-swapping -# of 64-bit values arriving from another system. - GS_SINT64="struct { gsu8 a8; }" - GS_UINT64="struct { gsu8 a8; }" - GS_HAVE_I64=0 - fi - fi -fi - - - - -GS_HAVE_I128=1 -if test $ac_cv_sizeof_long = 16; then - GS_SINT128="signed long" - GS_UINT128="unsigned long" -else - if test $ac_cv_sizeof_long_long = 16; then - GS_SINT128="signed long long" - GS_UINT128="unsigned long long" - else -# 128-bit ints not supported - but we need a dummy type for byte-swapping -# of 128-bit values arriving from another system. - GS_SINT128="struct { gsu8 a[16]; }" - GS_UINT128="struct { gsu8 a[16]; }" - GS_HAVE_I128=0 - fi -fi - - - - -if test $ac_cv_sizeof_float = 4; then - GS_FLT32="float" -else - { { $as_echo "$as_me:$LINENO: error: Unable to determine type for 32-bit float" >&5 -$as_echo "$as_me: error: Unable to determine type for 32-bit float" >&2;} - { (exit 1); exit 1; }; } -fi - - -if test $ac_cv_sizeof_double = 8; then - GS_FLT64="double" -else - { { $as_echo "$as_me:$LINENO: error: Unable to determine type for 64-bit float" >&5 -$as_echo "$as_me: error: Unable to determine type for 64-bit float" >&2;} - { (exit 1); exit 1; }; } -fi - - -#-------------------------------------------------------------------- -# Type-size information for encoding into archives using NSArchiver etc. -#-------------------------------------------------------------------- -if test $ac_cv_sizeof_short = 2; then - _GSC_S_SHT=_GSC_I16 -else - _GSC_S_SHT=_GSC_I32 -fi - - -if test $ac_cv_sizeof_int = 2; then - _GSC_S_INT=_GSC_I16 -else - if test $ac_cv_sizeof_int = 4; then - _GSC_S_INT=_GSC_I32 - else - if test $ac_cv_sizeof_int = 8; then - _GSC_S_INT=_GSC_I64 - else - if test $ac_cv_sizeof_int = 16; then - _GSC_S_INT=_GSC_I128 - fi - fi - fi -fi - - -if test $ac_cv_sizeof_long = 4; then - _GSC_S_LNG=_GSC_I32 -else - if test $ac_cv_sizeof_long = 8; then - _GSC_S_LNG=_GSC_I64 - else - if test $ac_cv_sizeof_long = 16; then - _GSC_S_LNG=_GSC_I128 - fi - fi -fi - - -if test $ac_cv_sizeof_long_long = 4; then - _GSC_S_LNG_LNG=_GSC_I32 -else - if test $ac_cv_sizeof_long_long = 8; then - _GSC_S_LNG_LNG=_GSC_I64 - else - if test $ac_cv_sizeof_long_long = 16; then - _GSC_S_LNG_LNG=_GSC_I128 - fi - fi -fi - - -#-------------------------------------------------------------------- -# Setup dynamic linking -#-------------------------------------------------------------------- -# Copyright (C) 2005 Free Software Foundation -# -# Copying and distribution of this file, with or without modification, -# are permitted in any medium without royalty provided the copyright -# notice and this notice are preserved. -#-------------------------------------------------------------------- -# Guess if we are using a object file format that supports automatic -# loading of constructor functions. -# -# If this system supports autoloading of constructors, that means that gcc -# doesn't have to do it for us via collect2. This routine tests for this -# in a very roundabout way by compiling a program with a constructor and -# testing the file, via nm, for certain symbols that collect2 includes to -# handle loading of constructors. -# -# Makes the following substitutions: -# Defines CON_AUTOLOAD (whether constructor functions are autoloaded) -#-------------------------------------------------------------------- -{ $as_echo "$as_me:$LINENO: checking loading of constructor functions" >&5 -$as_echo_n "checking loading of constructor functions... " >&6; } -if test "${objc_cv_con_autoload+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then - objc_cv_con_autoload=no -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -static int loaded = 0; - void cons_functions() __attribute__ ((constructor)); - void cons_functions() { loaded = 1; } - int main() - { - return ( (loaded == 1) ? 0 : 1); - } -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - objc_cv_con_autoload=yes -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -objc_cv_con_autoload=no -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - - -case "$target_os" in - cygwin*) objc_cv_con_autoload=yes;; - mingw*) objc_cv_con_autoload=yes;; -esac - -fi - -if test $objc_cv_con_autoload = yes; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - -cat >>confdefs.h <<\_ACEOF -#define CON_AUTOLOAD 1 -_ACEOF - -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - -# Copyright (C) 2005 Free Software Foundation -# Copying and distribution of this file, with or without modification, -# are permitted in any medium without royalty provided the copyright -# notice and this notice are preserved. -#-------------------------------------------------------------------- -# Guess the type of dynamic linker for the system -# -# Makes the following substitutions: -# DYNAMIC_LINKER - cooresponds to the interface that is included -# in objc-load.c (i.e. #include "${DYNAMIC_LINKER}-load.h") -#-------------------------------------------------------------------- -DYNAMIC_LINKER=null -if test "${ac_cv_header_dlfcn_h+set}" = set; then - { $as_echo "$as_me:$LINENO: checking for dlfcn.h" >&5 -$as_echo_n "checking for dlfcn.h... " >&6; } -if test "${ac_cv_header_dlfcn_h+set}" = set; then - $as_echo_n "(cached) " >&6 -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5 -$as_echo "$ac_cv_header_dlfcn_h" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking dlfcn.h usability" >&5 -$as_echo_n "checking dlfcn.h usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking dlfcn.h presence" >&5 -$as_echo_n "checking dlfcn.h presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: dlfcn.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: dlfcn.h: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: dlfcn.h: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: dlfcn.h: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: dlfcn.h: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: dlfcn.h: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: dlfcn.h: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: dlfcn.h: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: dlfcn.h: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: dlfcn.h: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: dlfcn.h: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for dlfcn.h" >&5 -$as_echo_n "checking for dlfcn.h... " >&6; } -if test "${ac_cv_header_dlfcn_h+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_header_dlfcn_h=$ac_header_preproc -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5 -$as_echo "$ac_cv_header_dlfcn_h" >&6; } - -fi -if test "x$ac_cv_header_dlfcn_h" = x""yes; then - DYNAMIC_LINKER=simple -fi - - -if test $DYNAMIC_LINKER = null; then - if test "${ac_cv_header_dl_h+set}" = set; then - { $as_echo "$as_me:$LINENO: checking for dl.h" >&5 -$as_echo_n "checking for dl.h... " >&6; } -if test "${ac_cv_header_dl_h+set}" = set; then - $as_echo_n "(cached) " >&6 -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_dl_h" >&5 -$as_echo "$ac_cv_header_dl_h" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking dl.h usability" >&5 -$as_echo_n "checking dl.h usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking dl.h presence" >&5 -$as_echo_n "checking dl.h presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: dl.h: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: dl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: dl.h: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: dl.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: dl.h: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: dl.h: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: dl.h: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: dl.h: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: dl.h: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: dl.h: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: dl.h: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: dl.h: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: dl.h: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: dl.h: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: dl.h: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: dl.h: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for dl.h" >&5 -$as_echo_n "checking for dl.h... " >&6; } -if test "${ac_cv_header_dl_h+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_header_dl_h=$ac_header_preproc -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_dl_h" >&5 -$as_echo "$ac_cv_header_dl_h" >&6; } - -fi -if test "x$ac_cv_header_dl_h" = x""yes; then - DYNAMIC_LINKER=hpux -fi - - -fi -if test $DYNAMIC_LINKER = null; then - if test "${ac_cv_header_windows_h+set}" = set; then - { $as_echo "$as_me:$LINENO: checking for windows.h" >&5 -$as_echo_n "checking for windows.h... " >&6; } -if test "${ac_cv_header_windows_h+set}" = set; then - $as_echo_n "(cached) " >&6 -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_windows_h" >&5 -$as_echo "$ac_cv_header_windows_h" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking windows.h usability" >&5 -$as_echo_n "checking windows.h usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking windows.h presence" >&5 -$as_echo_n "checking windows.h presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: windows.h: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: windows.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: windows.h: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: windows.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: windows.h: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: windows.h: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: windows.h: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: windows.h: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: windows.h: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: windows.h: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: windows.h: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: windows.h: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: windows.h: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: windows.h: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: windows.h: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: windows.h: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for windows.h" >&5 -$as_echo_n "checking for windows.h... " >&6; } -if test "${ac_cv_header_windows_h+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_header_windows_h=$ac_header_preproc -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_windows_h" >&5 -$as_echo "$ac_cv_header_windows_h" >&6; } - -fi -if test "x$ac_cv_header_windows_h" = x""yes; then - DYNAMIC_LINKER=win32 -fi - - -fi -if test $DYNAMIC_LINKER = null; then - if test "${ac_cv_header_dld_defs_h+set}" = set; then - { $as_echo "$as_me:$LINENO: checking for dld/defs.h" >&5 -$as_echo_n "checking for dld/defs.h... " >&6; } -if test "${ac_cv_header_dld_defs_h+set}" = set; then - $as_echo_n "(cached) " >&6 -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_dld_defs_h" >&5 -$as_echo "$ac_cv_header_dld_defs_h" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking dld/defs.h usability" >&5 -$as_echo_n "checking dld/defs.h usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking dld/defs.h presence" >&5 -$as_echo_n "checking dld/defs.h presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: dld/defs.h: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: dld/defs.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: dld/defs.h: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: dld/defs.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: dld/defs.h: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: dld/defs.h: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: dld/defs.h: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: dld/defs.h: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: dld/defs.h: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: dld/defs.h: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: dld/defs.h: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: dld/defs.h: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: dld/defs.h: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: dld/defs.h: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: dld/defs.h: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: dld/defs.h: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for dld/defs.h" >&5 -$as_echo_n "checking for dld/defs.h... " >&6; } -if test "${ac_cv_header_dld_defs_h+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_header_dld_defs_h=$ac_header_preproc -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_dld_defs_h" >&5 -$as_echo "$ac_cv_header_dld_defs_h" >&6; } - -fi -if test "x$ac_cv_header_dld_defs_h" = x""yes; then - DYNAMIC_LINKER=dld -fi - - -fi - -# NB: This is used as follows: in Source/Makefile.postamble we copy -# $(DYNAMIC_LINKER)-load.h into dynamic-load.h -{ $as_echo "$as_me:$LINENO: checking for dynamic linker type" >&5 -$as_echo_n "checking for dynamic linker type... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $DYNAMIC_LINKER" >&5 -$as_echo "$DYNAMIC_LINKER" >&6; } - -if test $DYNAMIC_LINKER = simple; then - -{ $as_echo "$as_me:$LINENO: checking for dladdr in -ldl" >&5 -$as_echo_n "checking for dladdr in -ldl... " >&6; } -if test "${ac_cv_lib_dl_dladdr+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dladdr (); -int -main () -{ -return dladdr (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_dl_dladdr=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dl_dladdr=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dladdr" >&5 -$as_echo "$ac_cv_lib_dl_dladdr" >&6; } -if test "x$ac_cv_lib_dl_dladdr" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBDL 1 -_ACEOF - - LIBS="-ldl $LIBS" - -fi - -fi - - -# NOTE: libdl should be in LIBS now if it's available. - -for ac_func in dladdr -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - - -#-------------------------------------------------------------------- -# Check for pthread.h -#-------------------------------------------------------------------- - -for ac_header in pthread.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - -if test $ac_cv_header_pthread_h = yes ; then - # The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:$LINENO: checking size of pthread_mutex_t" >&5 -$as_echo_n "checking size of pthread_mutex_t... " >&6; } -if test "${ac_cv_sizeof_pthread_mutex_t+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (pthread_mutex_t))) >= 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=0 ac_mid=0 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (pthread_mutex_t))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr $ac_mid + 1` - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (pthread_mutex_t))) < 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=-1 ac_mid=-1 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (pthread_mutex_t))) >= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_hi=`expr '(' $ac_mid ')' - 1` - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo= ac_hi= -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (pthread_mutex_t))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr '(' $ac_mid ')' + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in -?*) ac_cv_sizeof_pthread_mutex_t=$ac_lo;; -'') if test "$ac_cv_type_pthread_mutex_t" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (pthread_mutex_t) -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute sizeof (pthread_mutex_t) -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_sizeof_pthread_mutex_t=0 - fi ;; -esac -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -static long int longval () { return (long int) (sizeof (pthread_mutex_t)); } -static unsigned long int ulongval () { return (long int) (sizeof (pthread_mutex_t)); } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - return 1; - if (((long int) (sizeof (pthread_mutex_t))) < 0) - { - long int i = longval (); - if (i != ((long int) (sizeof (pthread_mutex_t)))) - return 1; - fprintf (f, "%ld", i); - } - else - { - unsigned long int i = ulongval (); - if (i != ((long int) (sizeof (pthread_mutex_t)))) - return 1; - fprintf (f, "%lu", i); - } - /* Do not output a trailing newline, as this causes \r\n confusion - on some platforms. */ - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_sizeof_pthread_mutex_t=`cat conftest.val` -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -if test "$ac_cv_type_pthread_mutex_t" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (pthread_mutex_t) -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute sizeof (pthread_mutex_t) -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_sizeof_pthread_mutex_t=0 - fi -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.val -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_pthread_mutex_t" >&5 -$as_echo "$ac_cv_sizeof_pthread_mutex_t" >&6; } - - - -cat >>confdefs.h <<_ACEOF -#define SIZEOF_PTHREAD_MUTEX_T $ac_cv_sizeof_pthread_mutex_t -_ACEOF - - - GS_SIZEOF_MUTEX_T=$ac_cv_sizeof_pthread_mutex_t - if test $ac_cv_sizeof_pthread_mutex_t = 0 ; then - { { $as_echo "$as_me:$LINENO: error: Unable to find size of pthread_mutex_t (required)." >&5 -$as_echo "$as_me: error: Unable to find size of pthread_mutex_t (required)." >&2;} - { (exit 1); exit 1; }; } - fi - - # The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:$LINENO: checking size of pthread_cond_t" >&5 -$as_echo_n "checking size of pthread_cond_t... " >&6; } -if test "${ac_cv_sizeof_pthread_cond_t+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (pthread_cond_t))) >= 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=0 ac_mid=0 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (pthread_cond_t))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr $ac_mid + 1` - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (pthread_cond_t))) < 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=-1 ac_mid=-1 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (pthread_cond_t))) >= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_hi=`expr '(' $ac_mid ')' - 1` - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo= ac_hi= -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -int -main () -{ -static int test_array [1 - 2 * !(((long int) (sizeof (pthread_cond_t))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr '(' $ac_mid ')' + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in -?*) ac_cv_sizeof_pthread_cond_t=$ac_lo;; -'') if test "$ac_cv_type_pthread_cond_t" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (pthread_cond_t) -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute sizeof (pthread_cond_t) -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_sizeof_pthread_cond_t=0 - fi ;; -esac -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -static long int longval () { return (long int) (sizeof (pthread_cond_t)); } -static unsigned long int ulongval () { return (long int) (sizeof (pthread_cond_t)); } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - return 1; - if (((long int) (sizeof (pthread_cond_t))) < 0) - { - long int i = longval (); - if (i != ((long int) (sizeof (pthread_cond_t)))) - return 1; - fprintf (f, "%ld", i); - } - else - { - unsigned long int i = ulongval (); - if (i != ((long int) (sizeof (pthread_cond_t)))) - return 1; - fprintf (f, "%lu", i); - } - /* Do not output a trailing newline, as this causes \r\n confusion - on some platforms. */ - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_sizeof_pthread_cond_t=`cat conftest.val` -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -if test "$ac_cv_type_pthread_cond_t" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (pthread_cond_t) -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute sizeof (pthread_cond_t) -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_sizeof_pthread_cond_t=0 - fi -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.val -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_pthread_cond_t" >&5 -$as_echo "$ac_cv_sizeof_pthread_cond_t" >&6; } - - - -cat >>confdefs.h <<_ACEOF -#define SIZEOF_PTHREAD_COND_T $ac_cv_sizeof_pthread_cond_t -_ACEOF - - - if test $ac_cv_sizeof_pthread_cond_t = 0 ; then - { { $as_echo "$as_me:$LINENO: error: Unable to find size of pthread_cond_t (required)." >&5 -$as_echo "$as_me: error: Unable to find size of pthread_cond_t (required)." >&2;} - { (exit 1); exit 1; }; } - fi - GS_SIZEOF_COND_T=$ac_cv_sizeof_pthread_cond_t - - # The cast to long int works around a bug in the HP C Compiler, -# see AC_CHECK_SIZEOF for more information. -{ $as_echo "$as_me:$LINENO: checking alignment of pthread_mutex_t" >&5 -$as_echo_n "checking alignment of pthread_mutex_t... " >&6; } -if test "${ac_cv_alignof_pthread_mutex_t+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -#ifndef offsetof -# define offsetof(type, member) ((char *) &((type *) 0)->member - (char *) 0) -#endif -typedef struct { char x; pthread_mutex_t y; } ac__type_alignof_; -int -main () -{ -static int test_array [1 - 2 * !(((long int) offsetof (ac__type_alignof_, y)) >= 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=0 ac_mid=0 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -#ifndef offsetof -# define offsetof(type, member) ((char *) &((type *) 0)->member - (char *) 0) -#endif -typedef struct { char x; pthread_mutex_t y; } ac__type_alignof_; -int -main () -{ -static int test_array [1 - 2 * !(((long int) offsetof (ac__type_alignof_, y)) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr $ac_mid + 1` - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -#ifndef offsetof -# define offsetof(type, member) ((char *) &((type *) 0)->member - (char *) 0) -#endif -typedef struct { char x; pthread_mutex_t y; } ac__type_alignof_; -int -main () -{ -static int test_array [1 - 2 * !(((long int) offsetof (ac__type_alignof_, y)) < 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=-1 ac_mid=-1 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -#ifndef offsetof -# define offsetof(type, member) ((char *) &((type *) 0)->member - (char *) 0) -#endif -typedef struct { char x; pthread_mutex_t y; } ac__type_alignof_; -int -main () -{ -static int test_array [1 - 2 * !(((long int) offsetof (ac__type_alignof_, y)) >= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_hi=`expr '(' $ac_mid ')' - 1` - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo= ac_hi= -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -#ifndef offsetof -# define offsetof(type, member) ((char *) &((type *) 0)->member - (char *) 0) -#endif -typedef struct { char x; pthread_mutex_t y; } ac__type_alignof_; -int -main () -{ -static int test_array [1 - 2 * !(((long int) offsetof (ac__type_alignof_, y)) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr '(' $ac_mid ')' + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in -?*) ac_cv_alignof_pthread_mutex_t=$ac_lo;; -'') if test "$ac_cv_type_pthread_mutex_t" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute alignment of pthread_mutex_t -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute alignment of pthread_mutex_t -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_alignof_pthread_mutex_t=0 - fi ;; -esac -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -#ifndef offsetof -# define offsetof(type, member) ((char *) &((type *) 0)->member - (char *) 0) -#endif -typedef struct { char x; pthread_mutex_t y; } ac__type_alignof_; -static long int longval () { return (long int) offsetof (ac__type_alignof_, y); } -static unsigned long int ulongval () { return (long int) offsetof (ac__type_alignof_, y); } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - return 1; - if (((long int) offsetof (ac__type_alignof_, y)) < 0) - { - long int i = longval (); - if (i != ((long int) offsetof (ac__type_alignof_, y))) - return 1; - fprintf (f, "%ld", i); - } - else - { - unsigned long int i = ulongval (); - if (i != ((long int) offsetof (ac__type_alignof_, y))) - return 1; - fprintf (f, "%lu", i); - } - /* Do not output a trailing newline, as this causes \r\n confusion - on some platforms. */ - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_alignof_pthread_mutex_t=`cat conftest.val` -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -if test "$ac_cv_type_pthread_mutex_t" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute alignment of pthread_mutex_t -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute alignment of pthread_mutex_t -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_alignof_pthread_mutex_t=0 - fi -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.val -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_alignof_pthread_mutex_t" >&5 -$as_echo "$ac_cv_alignof_pthread_mutex_t" >&6; } - - - -cat >>confdefs.h <<_ACEOF -#define ALIGNOF_PTHREAD_MUTEX_T $ac_cv_alignof_pthread_mutex_t -_ACEOF - - - GS_ALIGNOF_MUTEX_T=$ac_cv_alignof_pthread_mutex_t - if test $ac_cv_alignof_pthread_mutex_t = 0 ; then - { { $as_echo "$as_me:$LINENO: error: Unable to find align of pthread_mutex_t (required)." >&5 -$as_echo "$as_me: error: Unable to find align of pthread_mutex_t (required)." >&2;} - { (exit 1); exit 1; }; } - fi - - # The cast to long int works around a bug in the HP C Compiler, -# see AC_CHECK_SIZEOF for more information. -{ $as_echo "$as_me:$LINENO: checking alignment of pthread_cond_t" >&5 -$as_echo_n "checking alignment of pthread_cond_t... " >&6; } -if test "${ac_cv_alignof_pthread_cond_t+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -#ifndef offsetof -# define offsetof(type, member) ((char *) &((type *) 0)->member - (char *) 0) -#endif -typedef struct { char x; pthread_cond_t y; } ac__type_alignof_; -int -main () -{ -static int test_array [1 - 2 * !(((long int) offsetof (ac__type_alignof_, y)) >= 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=0 ac_mid=0 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -#ifndef offsetof -# define offsetof(type, member) ((char *) &((type *) 0)->member - (char *) 0) -#endif -typedef struct { char x; pthread_cond_t y; } ac__type_alignof_; -int -main () -{ -static int test_array [1 - 2 * !(((long int) offsetof (ac__type_alignof_, y)) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr $ac_mid + 1` - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -#ifndef offsetof -# define offsetof(type, member) ((char *) &((type *) 0)->member - (char *) 0) -#endif -typedef struct { char x; pthread_cond_t y; } ac__type_alignof_; -int -main () -{ -static int test_array [1 - 2 * !(((long int) offsetof (ac__type_alignof_, y)) < 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=-1 ac_mid=-1 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -#ifndef offsetof -# define offsetof(type, member) ((char *) &((type *) 0)->member - (char *) 0) -#endif -typedef struct { char x; pthread_cond_t y; } ac__type_alignof_; -int -main () -{ -static int test_array [1 - 2 * !(((long int) offsetof (ac__type_alignof_, y)) >= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_lo=$ac_mid; break -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_hi=`expr '(' $ac_mid ')' - 1` - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo= ac_hi= -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -#ifndef offsetof -# define offsetof(type, member) ((char *) &((type *) 0)->member - (char *) 0) -#endif -typedef struct { char x; pthread_cond_t y; } ac__type_alignof_; -int -main () -{ -static int test_array [1 - 2 * !(((long int) offsetof (ac__type_alignof_, y)) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_hi=$ac_mid -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_lo=`expr '(' $ac_mid ')' + 1` -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in -?*) ac_cv_alignof_pthread_cond_t=$ac_lo;; -'') if test "$ac_cv_type_pthread_cond_t" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute alignment of pthread_cond_t -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute alignment of pthread_cond_t -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_alignof_pthread_cond_t=0 - fi ;; -esac -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include - -#ifndef offsetof -# define offsetof(type, member) ((char *) &((type *) 0)->member - (char *) 0) -#endif -typedef struct { char x; pthread_cond_t y; } ac__type_alignof_; -static long int longval () { return (long int) offsetof (ac__type_alignof_, y); } -static unsigned long int ulongval () { return (long int) offsetof (ac__type_alignof_, y); } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - return 1; - if (((long int) offsetof (ac__type_alignof_, y)) < 0) - { - long int i = longval (); - if (i != ((long int) offsetof (ac__type_alignof_, y))) - return 1; - fprintf (f, "%ld", i); - } - else - { - unsigned long int i = ulongval (); - if (i != ((long int) offsetof (ac__type_alignof_, y))) - return 1; - fprintf (f, "%lu", i); - } - /* Do not output a trailing newline, as this causes \r\n confusion - on some platforms. */ - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_alignof_pthread_cond_t=`cat conftest.val` -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -if test "$ac_cv_type_pthread_cond_t" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute alignment of pthread_cond_t -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute alignment of pthread_cond_t -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } - else - ac_cv_alignof_pthread_cond_t=0 - fi -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.val -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_alignof_pthread_cond_t" >&5 -$as_echo "$ac_cv_alignof_pthread_cond_t" >&6; } - - - -cat >>confdefs.h <<_ACEOF -#define ALIGNOF_PTHREAD_COND_T $ac_cv_alignof_pthread_cond_t -_ACEOF - - - if test $ac_cv_alignof_pthread_cond_t = 0 ; then - { { $as_echo "$as_me:$LINENO: error: Unable to find align of pthread_cond_t (required)." >&5 -$as_echo "$as_me: error: Unable to find align of pthread_cond_t (required)." >&2;} - { (exit 1); exit 1; }; } - fi - GS_ALIGNOF_COND_T=$ac_cv_alignof_pthread_cond_t - -else - { { $as_echo "$as_me:$LINENO: error: Unable to find pthread.h (needed for thread support)." >&5 -$as_echo "$as_me: error: Unable to find pthread.h (needed for thread support)." >&2;} - { (exit 1); exit 1; }; } -fi -{ $as_echo "$as_me:$LINENO: checking for pthread_join in -lpthread" >&5 -$as_echo_n "checking for pthread_join in -lpthread... " >&6; } -if test "${ac_cv_lib_pthread_pthread_join+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lpthread $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char pthread_join (); -int -main () -{ -return pthread_join (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_pthread_pthread_join=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_pthread_pthread_join=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_join" >&5 -$as_echo "$ac_cv_lib_pthread_pthread_join" >&6; } -if test "x$ac_cv_lib_pthread_pthread_join" = x""yes; then - pthread_ok=yes -else - pthread_ok=no -fi - -ismingw=no -case "$target_os" in - mingw*) ismingw=yes;; -esac -if test $pthread_ok = yes ; then - LIBS="$LIBS -lpthread" -else - if test $ismingw = yes ; then - { $as_echo "$as_me:$LINENO: checking for pthread_join in -lpthreadGC2" >&5 -$as_echo_n "checking for pthread_join in -lpthreadGC2... " >&6; } -if test "${ac_cv_lib_pthreadGC2_pthread_join+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lpthreadGC2 $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char pthread_join (); -int -main () -{ -return pthread_join (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_pthreadGC2_pthread_join=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_pthreadGC2_pthread_join=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_pthreadGC2_pthread_join" >&5 -$as_echo "$ac_cv_lib_pthreadGC2_pthread_join" >&6; } -if test "x$ac_cv_lib_pthreadGC2_pthread_join" = x""yes; then - pthread_ok=yes -else - pthread_ok=no -fi - - if test $pthread_ok = yes ; then - LIBS="$LIBS -lpthreadGC2" - fi - fi -fi -if test $pthread_ok = no ; then - { { $as_echo "$as_me:$LINENO: error: Unable to find pthread library (needed for thread support)." >&5 -$as_echo "$as_me: error: Unable to find pthread library (needed for thread support)." >&2;} - { (exit 1); exit 1; }; } -fi - - -# Typically need librt on Solaris for sched_yield - -{ $as_echo "$as_me:$LINENO: checking for sched_yield in -lrt" >&5 -$as_echo_n "checking for sched_yield in -lrt... " >&6; } -if test "${ac_cv_lib_rt_sched_yield+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lrt $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char sched_yield (); -int -main () -{ -return sched_yield (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_rt_sched_yield=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for User Info Documentation directory" >&5 +$as_echo_n "checking for User Info Documentation directory... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_USER_DIR_DOC_INFO" >&5 +$as_echo "$GNUSTEP_USER_DIR_DOC_INFO" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for User Man Documentation directory" >&5 +$as_echo_n "checking for User Man Documentation directory... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_USER_DIR_DOC_MAN" >&5 +$as_echo "$GNUSTEP_USER_DIR_DOC_MAN" >&6; } - ac_cv_lib_rt_sched_yield=no -fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for System User directory" >&5 +$as_echo_n "checking for System User directory... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_SYSTEM_USERS_DIR" >&5 +$as_echo "$GNUSTEP_SYSTEM_USERS_DIR" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Network User directory" >&5 +$as_echo_n "checking for Network User directory... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_NETWORK_USERS_DIR" >&5 +$as_echo "$GNUSTEP_NETWORK_USERS_DIR" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Local User directory" >&5 +$as_echo_n "checking for Local User directory... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNUSTEP_LOCAL_USERS_DIR" >&5 +$as_echo "$GNUSTEP_LOCAL_USERS_DIR" >&6; } -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_rt_sched_yield" >&5 -$as_echo "$ac_cv_lib_rt_sched_yield" >&6; } -if test "x$ac_cv_lib_rt_sched_yield" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBRT 1 +# +# Set the default configuration file values in config.h to be hard-coded +# into NSPathUtilities.m +# +GNUSTEP_MAKEFILES=`echo $GNUSTEP_MAKEFILES|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_MAKEFILES "$GNUSTEP_MAKEFILES" _ACEOF - LIBS="-lrt $LIBS" +GNUSTEP_USER_DEFAULTS_DIR=`echo $GNUSTEP_USER_DEFAULTS_DIR|sed -e 's/\\\\/\\\\\\\\/g'` -fi +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_USER_DEFAULTS_DIR "$GNUSTEP_USER_DEFAULTS_DIR" +_ACEOF + +GNUSTEP_USER_CONFIG_FILE=`echo $GNUSTEP_USER_CONFIG_FILE|sed -e 's/\\\\/\\\\\\\\/g'` +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_USER_CONFIG_FILE "$GNUSTEP_USER_CONFIG_FILE" +_ACEOF +GNUSTEP_TARGET_CONFIG_FILE=`echo $GNUSTEP_TARGET_CONFIG_FILE|sed -e 's/\\\\/\\\\\\\\/g'` -#-------------------------------------------------------------------- -# One of these function needed by NSThread.m and objc initialize test -#-------------------------------------------------------------------- +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_CONFIG_FILE "$GNUSTEP_TARGET_CONFIG_FILE" +_ACEOF +# +# SYSTEM domain paths +# +GNUSTEP_SYSTEM_APPS=`echo $GNUSTEP_SYSTEM_APPS|sed -e 's/\\\\/\\\\\\\\/g'` -for ac_func in nanosleep usleep Sleep -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_SYSTEM_APPS "$GNUSTEP_SYSTEM_APPS" _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif +GNUSTEP_SYSTEM_ADMIN_APPS=`echo $GNUSTEP_SYSTEM_ADMIN_APPS|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_SYSTEM_ADMIN_APPS "$GNUSTEP_SYSTEM_ADMIN_APPS" +_ACEOF -#undef $ac_func -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif +GNUSTEP_SYSTEM_WEB_APPS=`echo $GNUSTEP_SYSTEM_WEB_APPS|sed -e 's/\\\\/\\\\\\\\/g'` -int -main () -{ -return $ac_func (); - ; - return 0; -} +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_SYSTEM_WEB_APPS "$GNUSTEP_SYSTEM_WEB_APPS" _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - eval "$as_ac_var=no" -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +GNUSTEP_SYSTEM_TOOLS=`echo $GNUSTEP_SYSTEM_TOOLS|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_SYSTEM_TOOLS "$GNUSTEP_SYSTEM_TOOLS" _ACEOF -fi -done +GNUSTEP_SYSTEM_ADMIN_TOOLS=`echo $GNUSTEP_SYSTEM_ADMIN_TOOLS|sed -e 's/\\\\/\\\\\\\\/g'` -#-------------------------------------------------------------------- -# Check whether Objective-C /really/ works -#-------------------------------------------------------------------- -{ $as_echo "$as_me:$LINENO: checking whether objc really works" >&5 -$as_echo_n "checking whether objc really works... " >&6; } -saved_LIBS="$LIBS" -saved_CPPFLAGS="$CPPFLAGS" -LIBS="$LIBS $LIBOBJC" -CPPFLAGS="$CPPFLAGS $OBJCFLAGS -x objective-c" -if test x"$objc_threaded" != x""; then - LIBS="$LIBS $objc_threaded" -fi -LIBS="$LIBS $extra_LIBS" -if test "${gs_cv_objc_works+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then - gs_cv_objc_works=yes -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include "$srcdir/config/config.objc.m" +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_SYSTEM_ADMIN_TOOLS "$GNUSTEP_SYSTEM_ADMIN_TOOLS" _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - gs_cv_objc_works=yes -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -( exit $ac_status ) -gs_cv_objc_works=no -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi +GNUSTEP_SYSTEM_LIBRARY=`echo $GNUSTEP_SYSTEM_LIBRARY|sed -e 's/\\\\/\\\\\\\\/g'` +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_SYSTEM_LIBRARY "$GNUSTEP_SYSTEM_LIBRARY" +_ACEOF -fi -if test $gs_cv_objc_works = yes; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } - echo "I don't seem to be able to use your Objective-C compiler to produce" - echo "working binaries! Please check your Objective-C compiler installation." - echo "If you are using gcc-3.x make sure that your compiler's libgcc_s and libobjc" - echo "can be found by the dynamic linker - usually that requires you to play" - echo "with LD_LIBRARY_PATH or /etc/ld.so.conf." - echo "Please refer to your compiler installation instructions for more help." - { { $as_echo "$as_me:$LINENO: error: The Objective-C compiler does not work or is not installed properly." >&5 -$as_echo "$as_me: error: The Objective-C compiler does not work or is not installed properly." >&2;} - { (exit 1); exit 1; }; } -fi +GNUSTEP_SYSTEM_LIBRARIES=`echo $GNUSTEP_SYSTEM_LIBRARIES|sed -e 's/\\\\/\\\\\\\\/g'` -# Don't revert any Objective-C flags as they are used in the next test +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_SYSTEM_LIBRARIES "$GNUSTEP_SYSTEM_LIBRARIES" +_ACEOF -#--------------------------------------------------------------------- -# See if we are using a compiler which allows us to change the class -# to be used for constant strings by using the -fconstant-string-class -# option. If that is the case, we change it to NSConstantString. -# Unless we are building for the apple runtime (ie only building base -# additions library and not implementing a constant string class). -#--------------------------------------------------------------------- -if test "$OBJC_RUNTIME_LIB" = "nx" -o "$OBJC_RUNTIME_LIB" = "apple"; then - NX_CONST_STRING_OBJCFLAGS="" - NX_CONST_STRING_CLASS=NXConstantString -else - strclass_CPPFLAGS="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS -fconstant-string-class=FooConstantString" - { $as_echo "$as_me:$LINENO: checking if the compiler supports -fconstant-string-class" >&5 -$as_echo_n "checking if the compiler supports -fconstant-string-class... " >&6; } - if test "${gs_cv_objc_compiler_supports_constant_string_class+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then - gs_cv_objc_compiler_supports_constant_string_class=no -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ + +GNUSTEP_SYSTEM_HEADERS=`echo $GNUSTEP_SYSTEM_HEADERS|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_SYSTEM_HEADERS "$GNUSTEP_SYSTEM_HEADERS" _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include "$srcdir/config/config.constant-string-class.m" + + +GNUSTEP_SYSTEM_DOC=`echo $GNUSTEP_SYSTEM_DOC|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_SYSTEM_DOC "$GNUSTEP_SYSTEM_DOC" _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - gs_cv_objc_compiler_supports_constant_string_class=yes -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -( exit $ac_status ) -gs_cv_objc_compiler_supports_constant_string_class=no -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi +GNUSTEP_SYSTEM_DOC_MAN=`echo $GNUSTEP_SYSTEM_DOC_MAN|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_SYSTEM_DOC_MAN "$GNUSTEP_SYSTEM_DOC_MAN" +_ACEOF -fi +GNUSTEP_SYSTEM_DOC_INFO=`echo $GNUSTEP_SYSTEM_DOC_INFO|sed -e 's/\\\\/\\\\\\\\/g'` - if test $gs_cv_objc_compiler_supports_constant_string_class = yes; then - NX_CONST_STRING_OBJCFLAGS="-fconstant-string-class=NSConstantString" - NX_CONST_STRING_CLASS=NSConstantString - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } - # Check whether --enable-nxconstantstring was given. -if test "${enable_nxconstantstring+set}" = set; then - enableval=$enable_nxconstantstring; -else - enable_nxconstantstring=no -fi +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_SYSTEM_DOC_INFO "$GNUSTEP_SYSTEM_DOC_INFO" +_ACEOF - if test $enable_nxconstantstring = yes; then - NX_CONST_STRING_OBJCFLAGS="" - NX_CONST_STRING_CLASS=NXConstantString - { $as_echo "$as_me:$LINENO: WARNING: You have enabled the use of NXConstantString as the string class in gnustep-base. The objective-c runtime library typically implements its own class of the same name, so you must either enforce a link order which ensures that the gnustep-base implementation is used, or (better) you must remove the class from the runtime library!" >&5 -$as_echo "$as_me: WARNING: You have enabled the use of NXConstantString as the string class in gnustep-base. The objective-c runtime library typically implements its own class of the same name, so you must either enforce a link order which ensures that the gnustep-base implementation is used, or (better) you must remove the class from the runtime library!" >&2;} - else - { { $as_echo "$as_me:$LINENO: error: Your compiler does not appear to implement the -fconstant-string-class option needed for support of strings. Please check for a more recent version or consider using --enable-nxconstantstring" >&5 -$as_echo "$as_me: error: Your compiler does not appear to implement the -fconstant-string-class option needed for support of strings. Please check for a more recent version or consider using --enable-nxconstantstring" >&2;} - { (exit 1); exit 1; }; } - fi - fi - CPPFLAGS="$strclass_CPPFLAGS" -fi +# +# NETWORK domain paths +# +GNUSTEP_NETWORK_APPS=`echo $GNUSTEP_NETWORK_APPS|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_NETWORK_APPS "$GNUSTEP_NETWORK_APPS" +_ACEOF +GNUSTEP_NETWORK_ADMIN_APPS=`echo $GNUSTEP_NETWORK_ADMIN_APPS|sed -e 's/\\\\/\\\\\\\\/g'` -# Don't revert any Objective-C flags as they are used in the next test +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_NETWORK_ADMIN_APPS "$GNUSTEP_NETWORK_ADMIN_APPS" +_ACEOF -#--------------------------------------------------------------------- -# Guess if we are using a compiler which has the (GNU extension) +load -# method which is executed before main. -# Defines HAVE_LOAD_METHOD if +load methods are called before main. -# Needed by NSProcessInfo.m -#--------------------------------------------------------------------- -{ $as_echo "$as_me:$LINENO: checking if +load method is executed before main" >&5 -$as_echo_n "checking if +load method is executed before main... " >&6; } -if test "${gs_cv_objc_load_method_worked+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then - gs_cv_objc_load_method_worked=no -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ + +GNUSTEP_NETWORK_WEB_APPS=`echo $GNUSTEP_NETWORK_WEB_APPS|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_NETWORK_WEB_APPS "$GNUSTEP_NETWORK_WEB_APPS" _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include "$srcdir/config/config.loadtest.m" + + +GNUSTEP_NETWORK_TOOLS=`echo $GNUSTEP_NETWORK_TOOLS|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_NETWORK_TOOLS "$GNUSTEP_NETWORK_TOOLS" _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - gs_cv_objc_load_method_worked=yes -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -( exit $ac_status ) -gs_cv_objc_load_method_worked=no -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi +GNUSTEP_NETWORK_ADMIN_TOOLS=`echo $GNUSTEP_NETWORK_ADMIN_TOOLS|sed -e 's/\\\\/\\\\\\\\/g'` +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_NETWORK_ADMIN_TOOLS "$GNUSTEP_NETWORK_ADMIN_TOOLS" +_ACEOF -fi -if test $gs_cv_objc_load_method_worked = yes; then +GNUSTEP_NETWORK_LIBRARY=`echo $GNUSTEP_NETWORK_LIBRARY|sed -e 's/\\\\/\\\\\\\\/g'` -cat >>confdefs.h <<\_ACEOF -#define HAVE_LOAD_METHOD 1 +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_NETWORK_LIBRARY "$GNUSTEP_NETWORK_LIBRARY" _ACEOF - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi -# Don't revert any Objective-C flags as they are used in the next test +GNUSTEP_NETWORK_LIBRARIES=`echo $GNUSTEP_NETWORK_LIBRARIES|sed -e 's/\\\\/\\\\\\\\/g'` -#-------------------------------------------------------------------- -# Check for thread synchronisation support in runtime -#-------------------------------------------------------------------- +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_NETWORK_LIBRARIES "$GNUSTEP_NETWORK_LIBRARIES" +_ACEOF -for ac_func in objc_sync_enter -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ + +GNUSTEP_NETWORK_HEADERS=`echo $GNUSTEP_NETWORK_HEADERS|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_NETWORK_HEADERS "$GNUSTEP_NETWORK_HEADERS" _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif +GNUSTEP_NETWORK_DOC=`echo $GNUSTEP_NETWORK_DOC|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_NETWORK_DOC "$GNUSTEP_NETWORK_DOC" +_ACEOF -#undef $ac_func -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif +GNUSTEP_NETWORK_DOC_MAN=`echo $GNUSTEP_NETWORK_DOC_MAN|sed -e 's/\\\\/\\\\\\\\/g'` -int -main () -{ -return $ac_func (); - ; - return 0; -} +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_NETWORK_DOC_MAN "$GNUSTEP_NETWORK_DOC_MAN" _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - eval "$as_ac_var=no" -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +GNUSTEP_NETWORK_DOC_INFO=`echo $GNUSTEP_NETWORK_DOC_INFO|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_NETWORK_DOC_INFO "$GNUSTEP_NETWORK_DOC_INFO" _ACEOF -fi -done -if test $ac_cv_func_objc_sync_enter = yes ; then - OBJCSYNC=1 -else - OBJCSYNC=0 -fi +# +# LOCAL domain paths +# +GNUSTEP_LOCAL_APPS=`echo $GNUSTEP_LOCAL_APPS|sed -e 's/\\\\/\\\\\\\\/g'` +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_LOCAL_APPS "$GNUSTEP_LOCAL_APPS" +_ACEOF -# Don't revert any Objective-C flags as they are used in the next test -#-------------------------------------------------------------------- -# Check for ObjC2 support in runtime -#-------------------------------------------------------------------- +GNUSTEP_LOCAL_ADMIN_APPS=`echo $GNUSTEP_LOCAL_ADMIN_APPS|sed -e 's/\\\\/\\\\\\\\/g'` -for ac_func in objc_setProperty -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_LOCAL_ADMIN_APPS "$GNUSTEP_LOCAL_ADMIN_APPS" _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif +GNUSTEP_LOCAL_WEB_APPS=`echo $GNUSTEP_LOCAL_WEB_APPS|sed -e 's/\\\\/\\\\\\\\/g'` -#undef $ac_func +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_LOCAL_WEB_APPS "$GNUSTEP_LOCAL_WEB_APPS" +_ACEOF -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif -int -main () -{ -return $ac_func (); - ; - return 0; -} +GNUSTEP_LOCAL_TOOLS=`echo $GNUSTEP_LOCAL_TOOLS|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_LOCAL_TOOLS "$GNUSTEP_LOCAL_TOOLS" _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - eval "$as_ac_var=no" -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +GNUSTEP_LOCAL_ADMIN_TOOLS=`echo $GNUSTEP_LOCAL_ADMIN_TOOLS|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_LOCAL_ADMIN_TOOLS "$GNUSTEP_LOCAL_ADMIN_TOOLS" _ACEOF -fi -done -if test $ac_cv_func_objc_setProperty = yes ; then - OBJC2RUNTIME=1 -else - OBJC2RUNTIME=0 -fi +GNUSTEP_LOCAL_LIBRARY=`echo $GNUSTEP_LOCAL_LIBRARY|sed -e 's/\\\\/\\\\\\\\/g'` +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_LOCAL_LIBRARY "$GNUSTEP_LOCAL_LIBRARY" +_ACEOF -#-------------------------------------------------------------------- -# Check for blocks support in runtime -#-------------------------------------------------------------------- -for ac_func in _Block_copy -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +GNUSTEP_LOCAL_LIBRARIES=`echo $GNUSTEP_LOCAL_LIBRARIES|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_LOCAL_LIBRARIES "$GNUSTEP_LOCAL_LIBRARIES" _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif +GNUSTEP_LOCAL_HEADERS=`echo $GNUSTEP_LOCAL_HEADERS|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_LOCAL_HEADERS "$GNUSTEP_LOCAL_HEADERS" +_ACEOF -#undef $ac_func -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif +GNUSTEP_LOCAL_DOC=`echo $GNUSTEP_LOCAL_DOC|sed -e 's/\\\\/\\\\\\\\/g'` -int -main () -{ -return $ac_func (); - ; - return 0; -} +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_LOCAL_DOC "$GNUSTEP_LOCAL_DOC" _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - eval "$as_ac_var=no" -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +GNUSTEP_LOCAL_DOC_MAN=`echo $GNUSTEP_LOCAL_DOC_MAN|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_LOCAL_DOC_MAN "$GNUSTEP_LOCAL_DOC_MAN" _ACEOF -fi -done -if test $ac_cv_func__Block_copy = yes ; then - HAVE_BLOCKS=1 -else - HAVE_BLOCKS=0 -fi +GNUSTEP_LOCAL_DOC_INFO=`echo $GNUSTEP_LOCAL_DOC_INFO|sed -e 's/\\\\/\\\\\\\\/g'` +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_LOCAL_DOC_INFO "$GNUSTEP_LOCAL_DOC_INFO" +_ACEOF -# Don't revert any Objective-C flags as they are used in the next test -GS_NONFRAGILE=0 -GS_MIXEDABI=0 -if test "$nonfragile" = "yes"; then - saved_CPPFLAGS="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS $OBJCFLAGS -fobjc-nonfragile-abi -x objective-c" - { $as_echo "$as_me:$LINENO: checking for non-fragile-abi support" >&5 -$as_echo_n "checking for non-fragile-abi support... " >&6; } - if test "$cross_compiling" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } -else - cat >conftest.$ac_ext <<_ACEOF -#include "$srcdir/config/config.non-fragile-ivars.m" +# +# USER_DIR domain paths +# +GNUSTEP_USER_DIR_APPS=`echo $GNUSTEP_USER_DIR_APPS|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_USER_DIR_APPS "$GNUSTEP_USER_DIR_APPS" _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - non_fragile=yes -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -( exit $ac_status ) -non_fragile=no -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi +GNUSTEP_USER_DIR_ADMIN_APPS=`echo $GNUSTEP_USER_DIR_ADMIN_APPS|sed -e 's/\\\\/\\\\\\\\/g'` - CPPFLAGS="$saved_CPPFLAGS" - if test $non_fragile = yes; then - OBJCFLAGS="$OBJCFLAGS -fobjc-nonfragile-abi" - GS_NONFRAGILE=1 - # Check whether --enable-mixedabi was given. -if test "${enable_mixedabi+set}" = set; then - enableval=$enable_mixedabi; -else - enable_mixedabi=yes -fi +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_USER_DIR_ADMIN_APPS "$GNUSTEP_USER_DIR_ADMIN_APPS" +_ACEOF - if test $enable_mixedabi = yes; then - GS_MIXEDABI=1 - fi - fi - { $as_echo "$as_me:$LINENO: result: $non_fragile" >&5 -$as_echo "$non_fragile" >&6; } -fi +GNUSTEP_USER_DIR_WEB_APPS=`echo $GNUSTEP_USER_DIR_WEB_APPS|sed -e 's/\\\\/\\\\\\\\/g'` +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_USER_DIR_WEB_APPS "$GNUSTEP_USER_DIR_WEB_APPS" +_ACEOF -# Don't revert any Objective-C flags as they are used in the next test +GNUSTEP_USER_DIR_TOOLS=`echo $GNUSTEP_USER_DIR_TOOLS|sed -e 's/\\\\/\\\\\\\\/g'` -#-------------------------------------------------------------------- -# get_uninstalled_dtable used by behavior.m and objc-load.m -#-------------------------------------------------------------------- -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_USER_DIR_TOOLS "$GNUSTEP_USER_DIR_TOOLS" _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "objc_get_uninstalled_dtable" >/dev/null 2>&1; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_OBJC_GET_UNINSTALLED_DTABLE 1 +GNUSTEP_USER_DIR_ADMIN_TOOLS=`echo $GNUSTEP_USER_DIR_ADMIN_TOOLS|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_USER_DIR_ADMIN_TOOLS "$GNUSTEP_USER_DIR_ADMIN_TOOLS" _ACEOF -fi -rm -f conftest* +GNUSTEP_USER_DIR_LIBRARY=`echo $GNUSTEP_USER_DIR_LIBRARY|sed -e 's/\\\\/\\\\\\\\/g'` -# Don't revert any Objective-C flags as they are used in the next test +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_USER_DIR_LIBRARY "$GNUSTEP_USER_DIR_LIBRARY" +_ACEOF -#-------------------------------------------------------------------- -# Native Objective-C exceptions -#-------------------------------------------------------------------- +GNUSTEP_USER_DIR_LIBRARIES=`echo $GNUSTEP_USER_DIR_LIBRARIES|sed -e 's/\\\\/\\\\\\\\/g'` -# First of all, determine if native Objective-C exceptions are enabled -# in gnustep-make. They are enabled if the compiler supports it; they -# are disabled if it doesn't. And, of course, the user may have -# forced one behaviour or the other. Note that we go and look at the -# actual config.make file to be able to know what was configured in -# gnustep-make regardless of any gnustep-base that is currently -# installed. We can't use `gnustep-config --objc-flags` because that -# may report native exceptions as disabled because the currently -# installed gnustep-base has them disabled. -if grep USE_OBJC_EXCEPTIONS $CURRENT_GNUSTEP_MAKEFILES/$lobj_dir/config.make | grep yes >&5 2>&5; then - exceptions=yes -else - exceptions=no -fi +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_USER_DIR_LIBRARIES "$GNUSTEP_USER_DIR_LIBRARIES" +_ACEOF -# At this point, if exceptions=no, then native exceptions are disabled -# and won't be used. If exceptions=yes, we need to check if they work -# and if the runtime has proper support for them. If it does, we'll -# happily use them; if it doesn't, we'll automatically disable them -# because they don't work. ;-) -#-------------------------------------------------------------------- -# One of these is needed by for handling uncaught exceptions -#-------------------------------------------------------------------- +GNUSTEP_USER_DIR_HEADERS=`echo $GNUSTEP_USER_DIR_HEADERS|sed -e 's/\\\\/\\\\\\\\/g'` -# TODO: These checks are not really needed if native exceptions are -# disabled. So maybe we should not run them at all in that case. On -# the other hand, that case is going to become more and more unusual. +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_USER_DIR_HEADERS "$GNUSTEP_USER_DIR_HEADERS" +_ACEOF -{ $as_echo "$as_me:$LINENO: checking for objc_setUncaughtExceptionHandler() in runtime" >&5 -$as_echo_n "checking for objc_setUncaughtExceptionHandler() in runtime... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -#include "$srcdir/config/config.setUncaughtExceptionHandler.m" + +GNUSTEP_USER_DIR_DOC=`echo $GNUSTEP_USER_DIR_DOC|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_USER_DIR_DOC "$GNUSTEP_USER_DIR_DOC" _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - have_set_uncaught_exception_handler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - have_set_uncaught_exception_handler=no -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test $have_set_uncaught_exception_handler = yes; then +GNUSTEP_USER_DIR_DOC_MAN=`echo $GNUSTEP_USER_DIR_DOC_MAN|sed -e 's/\\\\/\\\\\\\\/g'` -cat >>confdefs.h <<\_ACEOF -#define HAVE_SET_UNCAUGHT_EXCEPTION_HANDLER 1 +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_USER_DIR_DOC_MAN "$GNUSTEP_USER_DIR_DOC_MAN" _ACEOF -fi -{ $as_echo "$as_me:$LINENO: result: $have_set_uncaught_exception_handler" >&5 -$as_echo "$have_set_uncaught_exception_handler" >&6; } -# Don't revert any Objective-C flags as they are used in the next test +GNUSTEP_USER_DIR_DOC_INFO=`echo $GNUSTEP_USER_DIR_DOC_INFO|sed -e 's/\\\\/\\\\\\\\/g'` -{ $as_echo "$as_me:$LINENO: checking for objc_set_unexpected() in runtime" >&5 -$as_echo_n "checking for objc_set_unexpected() in runtime... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -#include "$srcdir/config/config.set_unexpected.m" +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_USER_DIR_DOC_INFO "$GNUSTEP_USER_DIR_DOC_INFO" _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - have_set_unexpected=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - have_set_unexpected=no -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test $have_set_unexpected = yes; then +GNUSTEP_TARGET_SYSTEM_USERS_DIR=`echo $GNUSTEP_TARGET_SYSTEM_USERS_DIR|sed -e 's/\\\\/\\\\\\\\/g'` -cat >>confdefs.h <<\_ACEOF -#define HAVE_SET_UNEXPECTED 1 +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_SYSTEM_USERS_DIR "$GNUSTEP_TARGET_SYSTEM_USERS_DIR" _ACEOF -fi -{ $as_echo "$as_me:$LINENO: result: $have_set_unexpected" >&5 -$as_echo "$have_set_unexpected" >&6; } +GNUSTEP_TARGET_NETWORK_USERS_DIR=`echo $GNUSTEP_TARGET_NETWORK_USERS_DIR|sed -e 's/\\\\/\\\\\\\\/g'` -# Don't revert any Objective-C flags as they are used in the next test +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_NETWORK_USERS_DIR "$GNUSTEP_TARGET_NETWORK_USERS_DIR" +_ACEOF -{ $as_echo "$as_me:$LINENO: checking for _objc_unexpected_exception in runtime" >&5 -$as_echo_n "checking for _objc_unexpected_exception in runtime... " >&6; } -if test "$cross_compiling" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } -else - cat >conftest.$ac_ext <<_ACEOF -#include "$srcdir/config/config.unexpected.m" +GNUSTEP_TARGET_LOCAL_USERS_DIR=`echo $GNUSTEP_TARGET_LOCAL_USERS_DIR|sed -e 's/\\\\/\\\\\\\\/g'` + +cat >>confdefs.h <<_ACEOF +#define GNUSTEP_TARGET_LOCAL_USERS_DIR "$GNUSTEP_TARGET_LOCAL_USERS_DIR" _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - have_unexpected=yes -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -( exit $ac_status ) -have_unexpected=no -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + +# +# Now load the values to be used in locating libraries etc used when +# building the base library ... as supplied by the gnustep-make package +# +# It looks like we ought to source the whole GNUstep.sh here, and even +# ask it to output all variables! That way we have access to (eg) +# GNUSTEP_SYSTEM_HEADERS below. +# +# We need to unset any values that we really need, or existing settings +# would be used by GNUstep.sh +# +unset GNUSTEP_SYSTEM_HEADERS +unset GNUSTEP_SYSTEM_LIBRARIES +unset GNUSTEP_NETWORK_HEADERS +unset GNUSTEP_NETWORK_LIBRARIES +unset GNUSTEP_LOCAL_HEADERS +unset GNUSTEP_LOCAL_LIBRARIES +GNUSTEP_MAKEFILES="$CURRENT_GNUSTEP_MAKEFILES" +GNUSTEP_SH_EXPORT_ALL_VARIABLES=yes +. "$CURRENT_GNUSTEP_MAKEFILES/GNUstep.sh" +unset GNUSTEP_SH_EXPORT_ALL_VARIABLES + +# For backwards compatibility, define GNUSTEP_SYSTEM_HEADERS from +# GNUSTEP_SYSTEM_ROOT if not set yet. +if test x"$GNUSTEP_SYSTEM_HEADERS" = x""; then + GNUSTEP_SYSTEM_HEADERS="$GNUSTEP_SYSTEM_ROOT/Library/Headers" fi +if test x"$GNUSTEP_SYSTEM_LIBRARIES" = x""; then + GNUSTEP_SYSTEM_LIBRARIES="$GNUSTEP_SYSTEM_ROOT/Library/Libraries" +fi -if test $have_unexpected = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_UNEXPECTED 1 -_ACEOF - +if test x"$GNUSTEP_NETWORK_HEADERS" = x""; then + GNUSTEP_NETWORK_HEADERS="$GNUSTEP_NETWORK_ROOT/Library/Headers" fi -{ $as_echo "$as_me:$LINENO: result: $have_unexpected" >&5 -$as_echo "$have_unexpected" >&6; } -# TODO: It would also be nice to actually test that native Objective-C -# exceptions work. +if test x"$GNUSTEP_NETWORK_LIBRARIES" = x""; then + GNUSTEP_NETWORK_LIBRARIES="$GNUSTEP_NETWORK_ROOT/Library/Libraries" +fi -if test "$exceptions" = "yes"; then - if test x"$have_set_uncaught_exception_handler" = x"no"; then - if test x"$have_set_unexpected" = x"no"; then - if test x"$have_unexpected" = x"no"; then - { $as_echo "$as_me:$LINENO: Disabling native Objective-C exceptions because the ObjC runtime" >&5 -$as_echo "$as_me: Disabling native Objective-C exceptions because the ObjC runtime" >&6;} - { $as_echo "$as_me:$LINENO: has no way to set an uncaught exception handler. Please install" >&5 -$as_echo "$as_me: has no way to set an uncaught exception handler. Please install" >&6;} - { $as_echo "$as_me:$LINENO: a recent Objective-C runtime if you want to use them." >&5 -$as_echo "$as_me: a recent Objective-C runtime if you want to use them." >&6;} - exceptions="no"; - fi - fi - fi +if test x"$GNUSTEP_LOCAL_HEADERS" = x""; then + GNUSTEP_LOCAL_HEADERS="$GNUSTEP_LOCAL_ROOT/Library/Headers" fi -{ $as_echo "$as_me:$LINENO: checking whether to enable native Objective-C exceptions" >&5 -$as_echo_n "checking whether to enable native Objective-C exceptions... " >&6; } -if test "$exceptions" = "yes"; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - BASE_NATIVE_OBJC_EXCEPTIONS=1 -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } - BASE_NATIVE_OBJC_EXCEPTIONS=0 +if test x"$GNUSTEP_LOCAL_LIBRARIES" = x""; then + GNUSTEP_LOCAL_LIBRARIES="$GNUSTEP_LOCAL_ROOT/Library/Libraries" fi +if test x"$GNUSTEP_IS_FLATTENED" = x"no"; then + GNUSTEP_SYSTEM_HEADERS="$GNUSTEP_SYSTEM_HEADERS/$LIBRARY_COMBO" + GNUSTEP_NETWORK_HEADERS="$GNUSTEP_NETWORK_HEADERS/$LIBRARY_COMBO" + GNUSTEP_LOCAL_HEADERS="$GNUSTEP_LOCAL_HEADERS/$LIBRARY_COMBO" + # FIXME: Cross-compiling should read the target from the configure + # options and use it. GNUSTEP_TARGET_* variables do not exist in + # this context (so "$GNUSTEP_TARGET_CPU" will always be "") + if test x"$GNUSTEP_TARGET_CPU" = x""; then + GNUSTEP_SYSTEM_LIBRARIES="$GNUSTEP_SYSTEM_LIBRARIES/$GNUSTEP_HOST_CPU/$GNUSTEP_HOST_OS/$LIBRARY_COMBO" + GNUSTEP_NETWORK_LIBRARIES="$GNUSTEP_NETWORK_LIBRARIES/$GNUSTEP_HOST_CPU/$GNUSTEP_HOST_OS/$LIBRARY_COMBO" + GNUSTEP_LOCAL_LIBRARIES="$GNUSTEP_LOCAL_LIBRARIES/$GNUSTEP_HOST_CPU/$GNUSTEP_HOST_OS/$LIBRARY_COMBO" + else + GNUSTEP_SYSTEM_LIBRARIES="$GNUSTEP_SYSTEM_LIBRARIES/$GNUSTEP_TARGET_CPU/$GNUSTEP_TARGET_OS/$LIBRARY_COMBO" + GNUSTEP_NETWORK_LIBRARIES="$GNUSTEP_NETWORK_LIBRARIES/$GNUSTEP_TARGET_CPU/$GNUSTEP_TARGET_OS/$LIBRARY_COMBO" + GNUSTEP_LOCAL_LIBRARIES="$GNUSTEP_LOCAL_LIBRARIES/$GNUSTEP_TARGET_CPU/$GNUSTEP_TARGET_OS/$LIBRARY_COMBO" + fi +fi -# Don't revert any Objective-C flags as they are used in the next test +# +# Add standard library and header directories for configure to use to locate +# plain C developer headers/libraries which haver been installed in the +# GNUstep hierarchy. +# +CPPFLAGS="$CPPFLAGS -I$GNUSTEP_SYSTEM_HEADERS -I$GNUSTEP_NETWORK_HEADERS -I$GNUSTEP_LOCAL_HEADERS" +LDFLAGS="$LDFLAGS -L$GNUSTEP_SYSTEM_LIBRARIES -L$GNUSTEP_NETWORK_LIBRARIES -L$GNUSTEP_LOCAL_LIBRARIES" #-------------------------------------------------------------------- -# Function needed by @synchronize directive +# Find the compiler #-------------------------------------------------------------------- - -for ac_func in objc_sync_enter -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS - eval "$as_ac_var=no" fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -done -HAVE_OBJC_SYNC_ENTER=no -if test $ac_cv_func_objc_sync_enter = yes ; then - HAVE_OBJC_SYNC_ENTER=yes fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -# Don't revert any Objective-C flags as they are used in the next test + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi -{ $as_echo "$as_me:$LINENO: checking for thread-safe +initialize in runtime" >&5 -$as_echo_n "checking for thread-safe +initialize in runtime... " >&6; } -if test "$cross_compiling" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -#include "$srcdir/config/config.initialize.m" -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - safe_initialize=yes + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -( exit $ac_status ) -safe_initialize=no fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi - - -if test $safe_initialize = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_INITIALIZE 1 -_ACEOF - +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - { $as_echo "$as_me:$LINENO: WARNING: Your ObjectiveC runtime does not support thread-safe class initialisation. Please use a different runtime if you intend to use threads." >&5 -$as_echo "$as_me: WARNING: Your ObjectiveC runtime does not support thread-safe class initialisation. Please use a different runtime if you intend to use threads." >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -{ $as_echo "$as_me:$LINENO: result: $safe_initialize" >&5 -$as_echo "$safe_initialize" >&6; } - -LIBS="$saved_LIBS" -CPPFLAGS="$saved_CPPFLAGS" - -#-------------------------------------------------------------------- -# Generic settings needed by NSZone.m -#-------------------------------------------------------------------- -{ $as_echo "$as_me:$LINENO: checking for size_t" >&5 -$as_echo_n "checking for size_t... " >&6; } -if test "${ac_cv_type_size_t+set}" = set; then + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else - ac_cv_type_size_t=no -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if (sizeof (size_t)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if (sizeof ((size_t))) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS - ac_cv_type_size_t=yes +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 -$as_echo "$ac_cv_type_size_t" >&6; } -if test "x$ac_cv_type_size_t" = x""yes; then - : +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -cat >>confdefs.h <<_ACEOF -#define size_t unsigned int -_ACEOF fi - -{ $as_echo "$as_me:$LINENO: checking for inline" >&5 -$as_echo_n "checking for inline... " >&6; } -if test "${ac_cv_c_inline+set}" = set; then +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else - ac_cv_c_inline=no -for ac_kw in inline __inline__ __inline; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifndef __cplusplus -typedef int foo_t; -static $ac_kw foo_t static_foo () {return 0; } -$ac_kw foo_t foo () {return 0; } -#endif - -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_c_inline=$ac_kw + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test "$ac_cv_c_inline" != no && break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi done + done +IFS=$as_save_IFS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 -$as_echo "$ac_cv_c_inline" >&6; } - - -case $ac_cv_c_inline in - inline | yes) ;; - *) - case $ac_cv_c_inline in - no) ac_val=;; - *) ac_val=$ac_cv_c_inline;; - esac - cat >>confdefs.h <<_ACEOF -#ifndef __cplusplus -#define inline $ac_val -#endif -_ACEOF - ;; -esac +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -#-------------------------------------------------------------------- -# Following header checks needed for bzero in Storage.m and other places -#-------------------------------------------------------------------- -{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if test "${ac_cv_header_stdc+set}" = set; then + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_header_stdc=yes + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS - ac_cv_header_stdc=no +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi fi -rm -f conftest* fi -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } -fi +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; + + ; return 0; } _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + else - $as_echo "$as_me: program exited with status $ac_status" >&5 + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - - -fi -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF - +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext - - - -for ac_header in string.h memory.h alloca.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#include <$ac_header> +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - - ;; + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } -done - - -#-------------------------------------------------------------------- -# Following header check needed NSConnection.h -#-------------------------------------------------------------------- - -for ac_header in float.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } +int +main () +{ -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> + ; + return 0; +} _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_preproc=no +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +int +main () +{ +#ifndef __GNUC__ + choke me +#endif - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes else - eval "$as_ac_Header=\$ac_header_preproc" + ac_compiler_gnu=no fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= fi - -done - - -#-------------------------------------------------------------------- -# Header files and functions for files and filesystems -#-------------------------------------------------------------------- - - - - - - -for ac_header in sys/stat.h sys/vfs.h sys/statfs.h sys/statvfs.h pwd.h grp.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> + +int +main () +{ + + ; + return 0; +} _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } +int +main () +{ -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ + ; + return 0; +} _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#include <$ac_header> + +int +main () +{ + + ; + return 0; +} _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} _ACEOF - +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg fi - +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break done +rm -f conftest.$ac_ext +CC=$ac_save_CC +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -for ac_header in sys/cdefs.h sys/syslimits.h sys/param.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_cpp "$LINENO"; then : - ac_header_compiler=no +else + # Broken: fails on valid input. +continue fi +rm -f conftest.err conftest.i conftest.$ac_ext -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#include <$ac_header> +#include _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no + # Passes both tests. +ac_preproc_ok=: +break fi +rm -f conftest.err conftest.i conftest.$ac_ext -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + done + ac_cv_prog_CPP=$CPP - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error _ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : +else + # Broken: fails on valid input. +continue fi +rm -f conftest.err conftest.i conftest.$ac_ext -done - -# Twisted header checks for some BSDs with stupid interdependencies - -for ac_header in sys/syslimits.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#if HAVE_SYS_CDEFS_H - #include - #endif - #include - - -#include <$ac_header> +#include _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" + # Passes both tests. +ac_preproc_ok=: +break fi +rm -f conftest.err conftest.i conftest.$ac_ext -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } fi -done +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -for ac_header in sys/param.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#if HAVE_SYS_CDEFS_H - #include - #endif - #if HAVE_SYS_SYSLIMITS_H - #include - #endif - - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF fi - -done +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" -for ac_header in sys/mount.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#if HAVE_SYS_CDEFS_H - #include - #endif - #if HAVE_SYS_SYSLIMITS_H - #include - #endif - #if HAVE_SYS_PARAM_H - #include - #endif - - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF + fi fi - -done - - - +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" -for ac_header in sys/types.h windows.h locale.h langinfo.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no + ac_cv_header_stdc=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#include <$ac_header> +#include + _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_header_stdc=no +fi +rm -f conftest* - ac_header_preproc=no fi -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - + ac_cv_header_stdc=no fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF +rm -f conftest* fi -done - -saved_LIBS="$LIBS" - -{ $as_echo "$as_me:$LINENO: checking for main in -lm" >&5 -$as_echo_n "checking for main in -lm... " >&6; } -if test "${ac_cv_lib_m_main+set}" = set; then - $as_echo_n "(cached) " >&6 +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lm $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif - +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { -return main (); - ; + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_m_main=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_run "$LINENO"; then : - ac_cv_lib_m_main=no +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_m_main" >&5 -$as_echo "$ac_cv_lib_m_main" >&6; } -if test "x$ac_cv_lib_m_main" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBM 1 -_ACEOF +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then - LIBS="-lm $LIBS" +$as_echo "#define STDC_HEADERS 1" >>confdefs.h fi +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF +fi +done + ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default" +if test "x$ac_cv_header_minix_config_h" = xyes; then : + MINIX=yes +else + MINIX= +fi + if test "$MINIX" = yes; then +$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h +$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h +$as_echo "#define _MINIX 1" >>confdefs.h + fi - -for ac_func in statvfs link symlink readlink geteuid getlogin getpwnam getpwnam_r getpwuid getpwuid_r getgrgid getgrgid_r getgrnam getgrnam_r rint getopt -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5 +$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; } +if ${ac_cv_safe_to_define___extensions__+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif +# define __EXTENSIONS__ 1 + $ac_includes_default int main () { -return $ac_func (); + ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_safe_to_define___extensions__=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" + ac_cv_safe_to_define___extensions__=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5 +$as_echo "$ac_cv_safe_to_define___extensions__" >&6; } + test $ac_cv_safe_to_define___extensions__ = yes && + $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h -fi -done + $as_echo "#define _ALL_SOURCE 1" >>confdefs.h -LIBS="$saved_LIBS" + $as_echo "#define _GNU_SOURCE 1" >>confdefs.h -#-------------------------------------------------------------------- -# These two headers (functions) needed by Time.m -#-------------------------------------------------------------------- + $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h + $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h +MAKECC=`gnustep-config --variable=CC` +if test "$CC" != "$MAKECC"; then + as_fn_error $? "You are running configure with the compiler ($CC) set to a different value from that used by gnustep-make ($MAKECC). Please run configure again with your environment set to match your gnustep-make" "$LINENO" 5 + exit 1 +fi +#-------------------------------------------------------------------- +# Check wether the compiler supports UTF-8 constant strings +#-------------------------------------------------------------------- -for ac_header in time.h sys/time.h tzfile.h sys/rusage.h ucbinclude/sys/resource.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 +GS_EXEC_CHARSET= +GS_INPUT_CHARSET= +# Check whether --enable-unicodeconstants was given. +if test "${enable_unicodeconstants+set}" = set; then : + enableval=$enable_unicodeconstants; fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } + +if test "$enable_unicodeconstants" != "no"; then + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether compiler supports UTF-8 constants in executable" >&5 +$as_echo_n "checking whether compiler supports UTF-8 constants in executable... " >&6; } + saved_CFLAGS="$CFLAGS" + saved_LANG="$LANG" + saved_LC_ALL="$LC_ALL" + export LANG="en_US.ISO-8859-1" + export LC_ALL="en_US.ISO-8859-1" + # We are working in a latin1 locale so we can build a program containing + # a latin1 pound character, and see if the executable has a utf-8 literal. + if test "$cross_compiling" = yes; then : + utf8literal_ok=no else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> +#include "$srcdir/config/config.constant-string-encoding.c" _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes +if ac_fn_c_try_run "$LINENO"; then : + utf8literal_ok=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no + utf8literal_ok=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + if test "$utf8literal_ok" = "yes"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; }; + else + # The compiler did not produce a utf-8 literal ... see if it does so when + # given the appropriate flags to tell it what charactersets to use. + CFLAGS="$CFLAGS -finput-charset=ISO-8859-1 -fexec-charset=UTF-8" + if test "$cross_compiling" = yes; then : + utf8literal_ok=no +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#include <$ac_header> +#include "$srcdir/config/config.constant-string-encoding.c" _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes +if ac_fn_c_try_run "$LINENO"; then : + utf8literal_ok=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no + utf8literal_ok=no fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF + if test "$utf8literal_ok" = "yes"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; }; + GS_EXEC_CHARSET=-fexec-charset=UTF-8 + GS_INPUT_CHARSET=-finput-charset=UTF-8 + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; }; + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Your compiler does not appear to support locales or command line options to control handling of charactersets, so we cannot be sure that the compiled code will contain the UTF-8 string literals expected by gnustep-base. This means that using any source code code containing non US-ASCII text in string literals may give unexpected results (or crashes) at runtime. However, as long as any such literals only use the UTF-8 characterset, this is unlikely to be a problem (since old/faulty compilers are likely to pass the UTF-8 literals through to the compiled code). Please configure using --disable-unicodeconstants to avoid seeing this warning." >&5 +$as_echo "$as_me: WARNING: Your compiler does not appear to support locales or command line options to control handling of charactersets, so we cannot be sure that the compiled code will contain the UTF-8 string literals expected by gnustep-base. This means that using any source code code containing non US-ASCII text in string literals may give unexpected results (or crashes) at runtime. However, as long as any such literals only use the UTF-8 characterset, this is unlikely to be a problem (since old/faulty compilers are likely to pass the UTF-8 literals through to the compiled code). Please configure using --disable-unicodeconstants to avoid seeing this warning." >&2;} + fi + fi + export LANG="$saved_LANG" + export LC_ALL="$saved_LC_ALL" + CFLAGS="$saved_CFLAGS" + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu fi -done +#-------------------------------------------------------------------- +# Check how to enable builtins for atomic operations +#-------------------------------------------------------------------- +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -for ac_func in time ctime tzset -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the compiler supports atomic operations" >&5 +$as_echo_n "checking whether the compiler supports atomic operations... " >&6; }; + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ +typedef int atomic; +int +main () +{ +atomic x; atomic y; __sync_bool_compare_and_swap(&x, y, y + 1); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + have_atomic=yes +else + have_atomic=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext; + if test "$have_atomic" = "yes"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; }; -#ifdef __STDC__ -# include -#else -# include -#endif +$as_echo "#define USE_ATOMIC_BUILTINS 1" >>confdefs.h -#undef $ac_func + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; }; + if test "$CC" = "gcc"; then + saved_CFLAGS="$CFLAGS"; + ATOMIC_CFLAGS=""; -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif + # FIXME: Forcing -march=i568 for any i568 or later CPU is a + # stop gap measure to make the compiler emit native assembly + # for atomic operations on i586 or latter processors (GCC by + # default emits code compatible with the original i386 and + # requires library functions to emulate atomic operations). + # When gnustep-make takes care of this kind of target setting, + # the check can safely be removed. + case "$target_cpu" in + i586*|i686*|i786*) + ATOMIC_CFLAGS="-march=i586" + CFLAGS="$saved_CFLAGS $ATOMIC_CFLAGS" + ;; + x86_64) + ATOMIC_CFLAGS="-march=x86-64" + CFLAGS="$saved_CFLAGS $ATOMIC_CFLAGS" + ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether gcc supports atomic operations with -march" >&5 +$as_echo_n "checking whether gcc supports atomic operations with -march... " >&6; }; + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +typedef int atomic; +int +main () +{ +atomic x; atomic y; __sync_bool_compare_and_swap(&x, y, y+1); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + need_march=yes +else + need_march=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext; + + if test "$need_march" = "yes"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; }; + OBJCFLAGS="$OBJCFLAGS $ATOMIC_CFLAGS"; + +$as_echo "#define USE_ATOMIC_BUILTINS 1" >>confdefs.h + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; }; + saved_LDFLAGS="$LDFLAGS"; + LDFLAGS="$saved_LDFLAGS -lgcc"; + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether gcc supports atomic operations using libgcc" >&5 +$as_echo_n "checking whether gcc supports atomic operations using libgcc... " >&6; }; + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +typedef int atomic; int main () { -return $ac_func (); +atomic x; atomic y; __sync_bool_compare_and_swap(&x, y, y+1); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" +if ac_fn_c_try_link "$LINENO"; then : + atomic_in_libgcc=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext + atomic_in_libgcc=no fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext; + if test "$atomic_in_libgcc" = "yes"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; }; + LIBS="$LIBS -lgcc"; -fi -done +$as_echo "#define USE_ATOMIC_BUILTINS 1" >>confdefs.h + else + LDFLAGS="$saved_LDFLAGS"; + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; }; + fi + fi + fi + fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -# Check if tzfile contains the proper definitions -if test $ac_cv_header_tzfile_h = yes; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "tzhead" >/dev/null 2>&1; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_TZHEAD 1 -_ACEOF +# Extract the first word of "whoami", so it can be a program name with args. +set dummy whoami; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_WHOAMI+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $WHOAMI in + [\\/]* | ?:[\\/]*) + ac_cv_path_WHOAMI="$WHOAMI" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_dummy="$PATH:/usr/ucb" +for as_dir in $as_dummy +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_WHOAMI="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + test -z "$ac_cv_path_WHOAMI" && ac_cv_path_WHOAMI="echo" + ;; +esac fi -rm -f conftest* - +WHOAMI=$ac_cv_path_WHOAMI +if test -n "$WHOAMI"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WHOAMI" >&5 +$as_echo "$WHOAMI" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -#-------------------------------------------------------------------- -# These headers/functions needed by GSTcpPort.m -#-------------------------------------------------------------------- - -for ac_header in sys/socket.h netinet/in.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +# Extract the first word of "pkg-config", so it can be a program name with args. +set dummy pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_PKGCONFIG+:} false; then : $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } + case $PKGCONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_PKGCONFIG="$PKGCONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in no +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_PKGCONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; + test -z "$ac_cv_path_PKGCONFIG" && ac_cv_path_PKGCONFIG="yes" + ;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes +fi +PKGCONFIG=$ac_cv_path_PKGCONFIG +if test -n "$PKGCONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKGCONFIG" >&5 +$as_echo "$PKGCONFIG" >&6; } else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ;; +#-------------------------------------------------------------------- +# specific target_os options +#-------------------------------------------------------------------- +INCLUDE_FLAGS="$CPPFLAGS" +LDIR_FLAGS="$LDFLAGS" +# This is just for configuring. Later, in config.make, INCLUDE_FLAGS +# goes in CONFIG_SYSTEM_INCL and LIBS goes in CONFIG_SYSTEM_LIBS +case "$target_os" in + freebsd* | openbsd* ) + CPPFLAGS="$CPPFLAGS -I/usr/local/include" + LDFLAGS="$LDFLAGS -L/usr/local/lib";; + netbsd*) CPPFLAGS="$CPPFLAGS -I/usr/pkg/include" + LDFLAGS="$LDFLAGS -Wl,-R/usr/pkg/lib -L/usr/pkg/lib";; esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } +#-------------------------------------------------------------------- +# Set Apple/Darwin/OSX/NeXT information for other tests +#-------------------------------------------------------------------- +OBJC_WITH_GC=no +OBJC_RUNTIME_LIB=`echo $LIBRARY_COMBO | tr '-' ' ' | awk '{print $1}'` +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the Objective-C runtime" >&5 +$as_echo_n "checking the Objective-C runtime... " >&6; } +if test "$OBJC_RUNTIME_LIB" = "nx" -o "$OBJC_RUNTIME_LIB" = "apple"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: NeXT" >&5 +$as_echo "NeXT" >&6; } + OBJCFLAGS="$OBJCFLAGS -fnext-runtime -DNeXT_RUNTIME" +elif test "$OBJC_RUNTIME_LIB" = "gnugc"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: GNU" >&5 +$as_echo "GNU" >&6; } + OBJCFLAGS="$OBJCFLAGS -fgnu-runtime" + OBJC_WITH_GC=yes +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: GNU" >&5 +$as_echo "GNU" >&6; } + OBJCFLAGS="$OBJCFLAGS -fgnu-runtime" fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - +LIBOBJC=`gnustep-config --objc-libs` +if test "$LIBOBJC" = ""; then + as_fn_error $? "The command 'gnustep-config --objc-libs' (provided by the gnustep-make package) returned no Objective-C library. Unable to continue configuring without Objective-C support." "$LINENO" 5 + exit 1 fi -done +#-------------------------------------------------------------------- +# Miscellaneous flags +#-------------------------------------------------------------------- -{ $as_echo "$as_me:$LINENO: checking for socklen_t" >&5 -$as_echo_n "checking for socklen_t... " >&6; } -if test "${ac_cv_type_socklen_t+set}" = set; then +# Check to see if the libobjc library is in our GNUSTEP_SYSTEM_LIBRARIES. +# If so, there are probably other libraries that we want there also, so +# leave the proper includes in CPPFLAGS and LDFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for custom shared objc library" >&5 +$as_echo_n "checking for custom shared objc library... " >&6; } +if ${gs_cv_objc_libdir+:} false; then : $as_echo_n "(cached) " >&6 else - ac_cv_type_socklen_t=no -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if (sizeof (socklen_t)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if (sizeof ((socklen_t))) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : + gs_cv_objc_libdir=NONE +gs_cv_objc_incdir=NONE +# Try GNUSTEP_SYSTEM_LIBRARIES first +if test "$GNUSTEP_IS_FLATTENED" = yes; then + GNUSTEP_LDIR="$GNUSTEP_SYSTEM_LIBRARIES" + GNUSTEP_HDIR="$GNUSTEP_SYSTEM_HEADERS" else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + GNUSTEP_LDIR="$GNUSTEP_SYSTEM_LIBRARIES/$obj_dir" + GNUSTEP_HDIR="$GNUSTEP_SYSTEM_HEADERS/$LIBRARY_COMBO" +fi - ac_cv_type_socklen_t=yes +if test -f "$GNUSTEP_HDIR/objc/objc.h"; then + if test -f "$GNUSTEP_LDIR/libobjc.a" -o -f "$GNUSTEP_LDIR/libobjc.so" -o -f "$GNUSTEP_LDIR/libobjc.dll.a" -o -f "$GNUSTEP_LDIR/libobjc-gnu.dylib" -o -f "$GNUSTEP_LDIR/libobjc_gc.a" -o -f "$GNUSTEP_LDIR/libobjc_gc.so" -o -f "$GNUSTEP_LDIR/libobjc_gc.dll.a" -o -f "$GNUSTEP_LDIR/libobjc_gc-gnu.dylib"; then + gs_cv_objc_libdir="$GNUSTEP_LDIR" + gs_cv_objc_incdir="$GNUSTEP_HDIR" + fi fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +# Try GNUSTEP_NETWORK_LIBRARIES second (override GNUSTEP_SYSTEM if +# found) +if test "$GNUSTEP_IS_FLATTENED" = yes; then + GNUSTEP_LDIR="$GNUSTEP_NETWORK_LIBRARIES" + GNUSTEP_HDIR="$GNUSTEP_NETWORK_HEADERS" else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + GNUSTEP_LDIR="$GNUSTEP_NETWORK_LIBRARIES/$obj_dir" + GNUSTEP_HDIR="$GNUSTEP_NETWORK_HEADERS/$LIBRARY_COMBO" +fi +if test -f "$GNUSTEP_HDIR/objc/objc.h"; then + if test -f "$GNUSTEP_LDIR/libobjc.a" -o -f "$GNUSTEP_LDIR/libobjc.so" -o -f "$GNUSTEP_LDIR/libobjc.dll.a" -o -f "$GNUSTEP_LDIR/libobjc-gnu.dylib" -o -f "$GNUSTEP_LDIR/libobjc_gc.a" -o -f "$GNUSTEP_LDIR/libobjc_gc.so" -o -f "$GNUSTEP_LDIR/libobjc_gc.dll.a" -o -f "$GNUSTEP_LDIR/libobjc_gc-gnu.dylib"; then + gs_cv_objc_libdir="$GNUSTEP_LDIR" + gs_cv_objc_incdir="$GNUSTEP_HDIR" + fi +fi +# Try GNUSTEP_LOCAL_LIBRARIES third (override GNUSTEP_SYSTEM and +# GNUSTEP_NETWORK if found) +if test "$GNUSTEP_IS_FLATTENED" = yes; then + GNUSTEP_LDIR="$GNUSTEP_LOCAL_LIBRARIES" + GNUSTEP_HDIR="$GNUSTEP_LOCAL_HEADERS" +else + GNUSTEP_LDIR="$GNUSTEP_LOCAL_LIBRARIES/$obj_dir" + GNUSTEP_HDIR="$GNUSTEP_LOCAL_HEADERS/$LIBRARY_COMBO" fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +if test -f "$GNUSTEP_HDIR/objc/objc.h"; then + if test -f "$GNUSTEP_LDIR/libobjc.a" -o -f "$GNUSTEP_LDIR/libobjc.so" -o -f "$GNUSTEP_LDIR/libobjc.dll.a" -o -f "$GNUSTEP_LDIR/libobjc-gnu.dylib" -o -f "$GNUSTEP_LDIR/libobjc_gc.a" -o -f "$GNUSTEP_LDIR/libobjc_gc.so" -o -f "$GNUSTEP_LDIR/libobjc_gc.dll.a" -o -f "$GNUSTEP_LDIR/libobjc_gc-gnu.dylib"; then + gs_cv_objc_libdir="$GNUSTEP_LDIR" + gs_cv_objc_incdir="$GNUSTEP_HDIR" + fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_socklen_t" >&5 -$as_echo "$ac_cv_type_socklen_t" >&6; } -if test "x$ac_cv_type_socklen_t" = x""yes; then -cat >>confdefs.h <<_ACEOF -#define HAVE_SOCKLEN_T 1 -_ACEOF +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gs_cv_objc_libdir" >&5 +$as_echo "$gs_cv_objc_libdir" >&6; } +if test "$gs_cv_objc_libdir" != "NONE"; then + # + # The following one is so that headers of custom libraries into + # $GNUSTEP_HDIR are used before the standard ones + # + INCLUDE_FLAGS="$INCLUDE_FLAGS -I$gs_cv_objc_incdir" + LDIR_FLAGS="$LDIR_FLAGS -L$gs_cv_objc_libdir/$LIBRARY_COMBO -L$gs_cv_objc_libdir" + CPPFLAGS="$CPPFLAGS -I$gs_cv_objc_incdir" + LDFLAGS="$LDFLAGS -L$gs_cv_objc_libdir" fi - #-------------------------------------------------------------------- -# These headers/functions needed for stacktrace in NSException.m +# Check if Objective-C is installed #-------------------------------------------------------------------- -PASS_ARG=no -# Check whether --enable-bfd was given. -if test "${enable_bfd+set}" = set; then - enableval=$enable_bfd; -else - enable_bfd=$PASS_ARG -fi +for ac_header in objc/runtime.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "objc/runtime.h" "ac_cv_header_objc_runtime_h" "$ac_includes_default" +if test "x$ac_cv_header_objc_runtime_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_OBJC_RUNTIME_H 1 +_ACEOF +fi -if test $enable_bfd = yes; then +done -for ac_header in bfd.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> +for ac_header in objc/objc.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "objc/objc.h" "ac_cv_header_objc_objc_h" "$ac_includes_default" +if test "x$ac_cv_header_objc_objc_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_OBJC_OBJC_H 1 _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_compiler=no fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } +done -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> +if test $ac_cv_header_objc_objc_h = no; then + echo "Check to make sure you have a full installation of the GCC" + echo "compiler that includes the Objective-C headers and libraries" + as_fn_error $? "Could not find Objective-C headers" "$LINENO" 5 +fi + +if test $OBJC_WITH_GC = yes; then + for ac_header in gc/gc.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "gc/gc.h" "ac_cv_header_gc_gc_h" "$ac_includes_default" +if test "x$ac_cv_header_gc_gc_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_GC_GC_H 1 _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes + gc_ok=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no + gc_ok=no fi -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +done - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 + if test "$gc_ok" = no; then + as_fn_error $? "Garbage collection was required, but the gc/gc.h header couldn't be found." "$LINENO" 5 + fi + saved_LIBS="$LIBS" + LIBS+=" -lgc" + ac_fn_c_check_func "$LINENO" "GC_malloc" "ac_cv_func_GC_malloc" +if test "x$ac_cv_func_GC_malloc" = xyes; then : + gc_ok=yes else - eval "$as_ac_Header=\$ac_header_preproc" + gc_ok=no fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } + + if test "$gc_ok" = no; then + as_fn_error $? "Garbage collection was required, but the gc library couldn't be found." "$LINENO" 5 + fi + ac_fn_c_check_func "$LINENO" "GC_register_my_thread" "ac_cv_func_GC_register_my_thread" +if test "x$ac_cv_func_GC_register_my_thread" = xyes; then : fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF + + if test "$ac_cv_func_GC_register_my_thread" = yes; then + +$as_echo "#define HAVE_GC_REGISTER_MY_THREAD 1" >>confdefs.h + + fi + ac_fn_c_check_func "$LINENO" "GC_allow_register_threads" "ac_cv_func_GC_allow_register_threads" +if test "x$ac_cv_func_GC_allow_register_threads" = xyes; then : fi -done + if test "$ac_cv_func_GC_allow_register_threads" = yes; then +$as_echo "#define HAVE_GC_ALLOW_REGISTER_THREADS 1" >>confdefs.h -{ $as_echo "$as_me:$LINENO: checking for dyn_string_append in -liberty" >&5 -$as_echo_n "checking for dyn_string_append in -liberty... " >&6; } -if test "${ac_cv_lib_iberty_dyn_string_append+set}" = set; then - $as_echo_n "(cached) " >&6 + fi + LIBS="-lobjc_gc -ldl" + ac_fn_c_check_func "$LINENO" "class_ivar_set_gcinvisible" "ac_cv_func_class_ivar_set_gcinvisible" +if test "x$ac_cv_func_class_ivar_set_gcinvisible" = xyes; then : + gc_ok=yes else - ac_check_lib_save_LIBS=$LIBS -LIBS="-liberty $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + gc_ok=no +fi + + if test "$gc_ok" = no; then + as_fn_error $? "Garbage collection was required, but the gc runtime couldn't be found." "$LINENO" 5 + fi + LIBS="$saved_LIBS" + +fi + +#-------------------------------------------------------------------- +# Check for strange network stuff used by gdomap +#-------------------------------------------------------------------- +{ $as_echo "$as_me:${as_lineno-$LINENO}: for gdomap network details" >&5 +$as_echo "$as_me: for gdomap network details" >&6;} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for variable length socket addresses" >&5 +$as_echo_n "checking for variable length socket addresses... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dyn_string_append (); + #include + #include + #include + int main () { -return dyn_string_append (); +struct ifreq s; s.ifr_addr.sa_len = 0; ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_iberty_dyn_string_append=yes +if ac_fn_c_try_compile "$LINENO"; then : + sa_len=1 else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_iberty_dyn_string_append=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS + sa_len=0 fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_iberty_dyn_string_append" >&5 -$as_echo "$ac_cv_lib_iberty_dyn_string_append" >&6; } -if test "x$ac_cv_lib_iberty_dyn_string_append" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBIBERTY 1 -_ACEOF +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +if test $sa_len = 1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: found" >&5 +$as_echo "found" >&6; } - LIBS="-liberty $LIBS" +$as_echo "#define HAVE_SA_LEN 1" >>confdefs.h +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5 +$as_echo "not found" >&6; } fi - -{ $as_echo "$as_me:$LINENO: checking for bfd_openr in -lbfd" >&5 -$as_echo_n "checking for bfd_openr in -lbfd... " >&6; } -if test "${ac_cv_lib_bfd_bfd_openr+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lbfd $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gcc visibility attribute support" >&5 +$as_echo_n "checking for gcc visibility attribute support... " >&6; } +saved_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS -Werror" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char bfd_openr (); -int -main () -{ -return bfd_openr (); - ; - return 0; -} + #include + int foo() __attribute__ ((visibility("internal"))); + int foo(){ return 1; } + int main(){ return foo(); } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_bfd_bfd_openr=yes +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: found" >&5 +$as_echo "found" >&6; } + gs_visibility=1 else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: not present" >&5 +$as_echo "not present" >&6; } + gs_visibility=0 - ac_cv_lib_bfd_bfd_openr=no fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_bfd_bfd_openr" >&5 -$as_echo "$ac_cv_lib_bfd_bfd_openr" >&6; } -if test "x$ac_cv_lib_bfd_bfd_openr" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBBFD 1 +cat >>confdefs.h <<_ACEOF +#define HAVE_VISIBILITY_ATTRIBUTE $gs_visibility _ACEOF - LIBS="-lbfd $LIBS" - -fi +CFLAGS="$saved_CFLAGS" -else -for ac_header in execinfo.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } +#-------------------------------------------------------------------- +# Check if system has buggy SO_REUSEADDR +#-------------------------------------------------------------------- +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether SO_REUSEADDR is broken" >&5 +$as_echo_n "checking whether SO_REUSEADDR is broken... " >&6; } +if test "$cross_compiling" = yes; then : + reuseaddr_ok=0 else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> +#include "$srcdir/config/config.reuseaddr.c" _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes +if ac_fn_c_try_run "$LINENO"; then : + reuseaddr_ok=1 else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no + reuseaddr_ok=0 +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } +if test $reuseaddr_ok = 0; then -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +$as_echo "#define BROKEN_SO_REUSEADDR 1" >>confdefs.h - ac_header_preproc=no + echo + echo "The SO_REUSEADDR socket option for controlling re-use of network" + echo "sockets immediately after shutdown appears to be broken on this" + echo "machine. Networking code will be built without using this" + echo "feature." + echo "The effect of this lack is that when a network service is shut" + echo "down, it cannot be re-started on the same network port until" + echo "an operating-system timeout has expired." + echo "For servers other than gdomap, GNUstep does not normally need" + echo "a particular network port, so the problem is unlikely to arise." + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +#-------------------------------------------------------------------- +# Check for thread flags for libobjc. +#-------------------------------------------------------------------- +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objc threading flags" >&5 +$as_echo_n "checking for objc threading flags... " >&6; } +# +# Get them from gnustep-make which contains the real code to get them +# +objc_threaded=`grep objc_threaded: $CURRENT_GNUSTEP_MAKEFILES/$lobj_dir/config.make | sed -e 's/objc_threaded:=//'` +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $objc_threaded" >&5 +$as_echo "$objc_threaded" >&6; } - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +#-------------------------------------------------------------------- +# Byte order information needed for foundation headers. +#-------------------------------------------------------------------- + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5 +$as_echo_n "checking whether byte ordering is bigendian... " >&6; } +if ${ac_cv_c_bigendian+:} false; then : $as_echo_n "(cached) " >&6 else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } + ac_cv_c_bigendian=unknown + # See if we're dealing with a universal compiler. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifndef __APPLE_CC__ + not a universal capable compiler + #endif + typedef int dummy; -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + # Check for potential -arch flags. It is not universal unless + # there are at least two -arch flags with different values. + ac_arch= + ac_prev= + for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do + if test -n "$ac_prev"; then + case $ac_word in + i?86 | x86_64 | ppc | ppc64) + if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then + ac_arch=$ac_word + else + ac_cv_c_bigendian=universal + break + fi + ;; + esac + ac_prev= + elif test "x$ac_word" = "x-arch"; then + ac_prev=arch + fi + done fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + if test $ac_cv_c_bigendian = unknown; then + # See if sys/param.h defines the BYTE_ORDER macro. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + #include -done - +int +main () +{ +#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \ + && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \ + && LITTLE_ENDIAN) + bogus endian macros + #endif -for ac_func in backtrace -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ + ; + return 0; +} _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + # It does; now see whether it defined to BIG_ENDIAN or not. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif +#include + #include int main () { -return $ac_func (); +#if BYTE_ORDER != BIG_ENDIAN + not big endian + #endif + ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_bigendian=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext + ac_cv_c_bigendian=no fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -done +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi + if test $ac_cv_c_bigendian = unknown; then + # See if defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris). + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include -fi +int +main () +{ +#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN) + bogus endian macros + #endif -for ac_func in __builtin_extract_return_address -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ + ; + return 0; +} _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + # It does; now see whether it defined to _BIG_ENDIAN or not. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif +#include -#undef $ac_func +int +main () +{ +#ifndef _BIG_ENDIAN + not big endian + #endif -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_bigendian=yes +else + ac_cv_c_bigendian=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi + if test $ac_cv_c_bigendian = unknown; then + # Compile a test program. + if test "$cross_compiling" = yes; then : + # Try to guess by grepping values from an object file. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +short int ascii_mm[] = + { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; + short int ascii_ii[] = + { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; + int use_ascii (int i) { + return ascii_mm[i] + ascii_ii[i]; + } + short int ebcdic_ii[] = + { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; + short int ebcdic_mm[] = + { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; + int use_ebcdic (int i) { + return ebcdic_mm[i] + ebcdic_ii[i]; + } + extern int foo; int main () { -return $ac_func (); +return use_ascii (foo) == use_ebcdic (foo); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - - -#-------------------------------------------------------------------- -# These headers/functions needed by NSLog.m -#-------------------------------------------------------------------- - -for ac_header in syslog.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 +if ac_fn_c_try_compile "$LINENO"; then : + if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then + ac_cv_c_bigendian=yes + fi + if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then + if test "$ac_cv_c_bigendian" = unknown; then + ac_cv_c_bigendian=no + else + # finding both strings is unlikely to happen, but who knows? + ac_cv_c_bigendian=unknown + fi + fi fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi +int +main () +{ -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } + /* Are we little or big endian? From Harbison&Steele. */ + union + { + long int l; + char c[sizeof (long int)]; + } u; + u.l = 1; + return u.c[sizeof (long int) - 1] == 1; -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> + ; + return 0; +} _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_c_bigendian=no else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_c_bigendian=yes +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi - ac_header_preproc=no + fi fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5 +$as_echo "$ac_cv_c_bigendian" >&6; } + case $ac_cv_c_bigendian in #( + yes) + $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h +;; #( + no) + ;; #( + universal) -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } +$as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ;; #( + *) + as_fn_error $? "unknown endianness + presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;; + esac - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 +if test $ac_cv_c_bigendian = yes; then + GS_WORDS_BIGENDIAN=1 else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - + GS_WORDS_BIGENDIAN=0 fi -done - -for ac_func in syslog -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +#-------------------------------------------------------------------- +# Type size information needed for foundation headers. +#-------------------------------------------------------------------- +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of void*" >&5 +$as_echo_n "checking size of void*... " >&6; } +if ${ac_cv_sizeof_voidp+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (void*))" "ac_cv_sizeof_voidp" "$ac_includes_default"; then : -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ +else + if test "$ac_cv_type_voidp" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (void*) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_voidp=0 + fi +fi -#ifdef __STDC__ -# include -#else -# include -#endif +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_voidp" >&5 +$as_echo "$ac_cv_sizeof_voidp" >&6; } -#undef $ac_func -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif -int -main () -{ -return $ac_func (); - ; - return 0; -} +cat >>confdefs.h <<_ACEOF +#define SIZEOF_VOIDP $ac_cv_sizeof_voidp _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - eval "$as_ac_var=no" -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF -fi -done +GS_SINT8="signed char" +GS_UINT8="unsigned char" -#-------------------------------------------------------------------- -# These headers/functions needed by NSRunLoop.m -#-------------------------------------------------------------------- -for ac_header in poll.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of short" >&5 +$as_echo_n "checking size of short... " >&6; } +if ${ac_cv_sizeof_short+:} false; then : $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (short))" "ac_cv_sizeof_short" "$ac_includes_default"; then : -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + if test "$ac_cv_type_short" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (short) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_short=0 + fi +fi - ac_header_preproc=no fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_short" >&5 +$as_echo "$ac_cv_sizeof_short" >&6; } -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +cat >>confdefs.h <<_ACEOF +#define SIZEOF_SHORT $ac_cv_sizeof_short +_ACEOF + + + + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int" >&5 +$as_echo_n "checking size of int... " >&6; } +if ${ac_cv_sizeof_int+:} false; then : $as_echo_n "(cached) " >&6 else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (int))" "ac_cv_sizeof_int" "$ac_includes_default"; then : +else + if test "$ac_cv_type_int" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (int) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_int=0 + fi fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_int" >&5 +$as_echo "$ac_cv_sizeof_int" >&6; } -done -for ac_func in poll -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +cat >>confdefs.h <<_ACEOF +#define SIZEOF_INT $ac_cv_sizeof_int _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif -#undef $ac_func -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long" >&5 +$as_echo_n "checking size of long... " >&6; } +if ${ac_cv_sizeof_long+:} false; then : + $as_echo_n "(cached) " >&6 else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long))" "ac_cv_sizeof_long" "$ac_includes_default"; then : - eval "$as_ac_var=no" +else + if test "$ac_cv_type_long" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (long) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_long=0 + fi fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long" >&5 +$as_echo "$ac_cv_sizeof_long" >&6; } -fi -done -have_poll=no -if test $ac_cv_header_poll_h = yes; then - have_poll=yes - { $as_echo "$as_me:$LINENO: checking for poll emulation" >&5 -$as_echo_n "checking for poll emulation... " >&6; } - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include "config/config.poll.c" -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "emulating_poll" >/dev/null 2>&1; then - have_poll=no -fi -rm -f conftest* - if test $have_poll = yes; then - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } - { $as_echo "$as_me:$LINENO: checking if poll supports devices" >&5 -$as_echo_n "checking if poll supports devices... " >&6; } - if test "$cross_compiling" = yes; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include "$srcdir/config/config.poll-dev.c" +cat >>confdefs.h <<_ACEOF +#define SIZEOF_LONG $ac_cv_sizeof_long _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : + + + + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long long" >&5 +$as_echo_n "checking size of long long... " >&6; } +if ${ac_cv_sizeof_long_long+:} false; then : + $as_echo_n "(cached) " >&6 else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long long))" "ac_cv_sizeof_long_long" "$ac_includes_default"; then : -( exit $ac_status ) -have_poll=no +else + if test "$ac_cv_type_long_long" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (long long) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_long_long=0 + fi fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long_long" >&5 +$as_echo "$ac_cv_sizeof_long_long" >&6; } - if test $have_poll = yes; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } -cat >>confdefs.h <<\_ACEOF -#define HAVE_POLL_F 1 +cat >>confdefs.h <<_ACEOF +#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long _ACEOF - else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } - fi - else - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - fi -fi - -#-------------------------------------------------------------------- -# This function needed by StdioStream.m -#-------------------------------------------------------------------- - -for ac_func in vsprintf vasprintf snprintf vsnprintf -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of float" >&5 +$as_echo_n "checking size of float... " >&6; } +if ${ac_cv_sizeof_float+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (float))" "ac_cv_sizeof_float" "$ac_includes_default"; then : -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ +else + if test "$ac_cv_type_float" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (float) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_float=0 + fi +fi -#ifdef __STDC__ -# include -#else -# include -#endif +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_float" >&5 +$as_echo "$ac_cv_sizeof_float" >&6; } -#undef $ac_func -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif -int -main () -{ -return $ac_func (); - ; - return 0; -} +cat >>confdefs.h <<_ACEOF +#define SIZEOF_FLOAT $ac_cv_sizeof_float _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - eval "$as_ac_var=no" -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF -fi -done -if test $ac_cv_func_vsprintf = yes ; then - if test "$cross_compiling" = yes; then - VSPRINTF_RETURNS_LENGTH=1 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include "$srcdir/config/config.vsprintf.c" -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - VSPRINTF_RETURNS_LENGTH=1 +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of double" >&5 +$as_echo_n "checking size of double... " >&6; } +if ${ac_cv_sizeof_double+:} false; then : + $as_echo_n "(cached) " >&6 else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (double))" "ac_cv_sizeof_double" "$ac_includes_default"; then : -( exit $ac_status ) -VSPRINTF_RETURNS_LENGTH=0 +else + if test "$ac_cv_type_double" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (double) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_double=0 + fi fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_double" >&5 +$as_echo "$ac_cv_sizeof_double" >&6; } cat >>confdefs.h <<_ACEOF -#define VSPRINTF_RETURNS_LENGTH $VSPRINTF_RETURNS_LENGTH +#define SIZEOF_DOUBLE $ac_cv_sizeof_double _ACEOF -fi -if test $ac_cv_func_vasprintf = yes ; then - if test "$cross_compiling" = yes; then - VASPRINTF_RETURNS_LENGTH=1 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include "$srcdir/config/config.vasprintf.c" -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - VASPRINTF_RETURNS_LENGTH=1 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -( exit $ac_status ) -VASPRINTF_RETURNS_LENGTH=0 -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + + + +if test $ac_cv_sizeof_voidp = $ac_cv_sizeof_int; then + GS_SADDR="int" + GS_UADDR="unsigned int" +else + if test $ac_cv_sizeof_voidp = $ac_cv_sizeof_long; then + GS_SADDR="long" + GS_UADDR="unsigned long" + else + if test $ac_cv_sizeof_voidp = $ac_cv_sizeof_long_long; then + GS_SADDR="long long" + GS_UADDR="unsigned long long" + else + as_fn_error $? "Unable to find integer of same size as void*" "$LINENO" 5 + fi + fi fi -cat >>confdefs.h <<_ACEOF -#define VASPRINTF_RETURNS_LENGTH $VASPRINTF_RETURNS_LENGTH -_ACEOF +if test $ac_cv_sizeof_short = 2; then + GS_SINT16="signed short" + GS_UINT16="unsigned short" +else + if test $ac_cv_sizeof_int = 2; then + GS_SINT16="signed int" + GS_UINT16="unsigned int" + else + as_fn_error $? "Unable to determine type for 16-bit integer" "$LINENO" 5 + fi +fi + + +if test $ac_cv_sizeof_int = 4; then + GS_SINT32="signed int" + GS_UINT32="unsigned int" +else + if test $ac_cv_sizeof_long = 4; then + GS_SINT32="signed long" + GS_UINT32="unsigned long" + else + if test $ac_cv_sizeof_short = 4; then + GS_SINT32="signed short" + GS_UINT32="unsigned short" + else + as_fn_error $? "Unable to determine type for 32-bit integer" "$LINENO" 5 + fi + fi fi -#-------------------------------------------------------------------- -# This function needed by NSFileManager.m -#-------------------------------------------------------------------- -for ac_func in getcwd -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 + +GS_HAVE_I64=1 +if test $ac_cv_sizeof_int = 8; then + GS_SINT64="signed int" + GS_UINT64="unsigned int" else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func + if test $ac_cv_sizeof_long = 8; then + GS_SINT64="signed long" + GS_UINT64="unsigned long" + else + if test $ac_cv_sizeof_long_long = 8; then + GS_SINT64="signed long long" + GS_UINT64="unsigned long long" + else +# 64-bit ints not supported - but we need a dummy type for byte-swapping +# of 64-bit values arriving from another system. + GS_SINT64="struct { gsu8 a8; }" + GS_UINT64="struct { gsu8 a8; }" + GS_HAVE_I64=0 + fi + fi +fi -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif -#undef $ac_func -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif +GS_HAVE_I128=1 +if test $ac_cv_sizeof_long = 16; then + GS_SINT128="signed long" + GS_UINT128="unsigned long" +else + if test $ac_cv_sizeof_long_long = 16; then + GS_SINT128="signed long long" + GS_UINT128="unsigned long long" + else +# 128-bit ints not supported - but we need a dummy type for byte-swapping +# of 128-bit values arriving from another system. + GS_SINT128="struct { gsu8 a[16]; }" + GS_UINT128="struct { gsu8 a[16]; }" + GS_HAVE_I128=0 + fi +fi -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" + + + +if test $ac_cv_sizeof_float = 4; then + GS_FLT32="float" else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + as_fn_error $? "Unable to determine type for 32-bit float" "$LINENO" 5 +fi + - eval "$as_ac_var=no" +if test $ac_cv_sizeof_double = 8; then + GS_FLT64="double" +else + as_fn_error $? "Unable to determine type for 64-bit float" "$LINENO" 5 fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext + +#-------------------------------------------------------------------- +# Type-size information for encoding into archives using NSArchiver etc. +#-------------------------------------------------------------------- +if test $ac_cv_sizeof_short = 2; then + _GSC_S_SHT=_GSC_I16 +else + _GSC_S_SHT=_GSC_I32 fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF + +if test $ac_cv_sizeof_int = 2; then + _GSC_S_INT=_GSC_I16 +else + if test $ac_cv_sizeof_int = 4; then + _GSC_S_INT=_GSC_I32 + else + if test $ac_cv_sizeof_int = 8; then + _GSC_S_INT=_GSC_I64 + else + if test $ac_cv_sizeof_int = 16; then + _GSC_S_INT=_GSC_I128 + fi + fi + fi fi -done +if test $ac_cv_sizeof_long = 4; then + _GSC_S_LNG=_GSC_I32 +else + if test $ac_cv_sizeof_long = 8; then + _GSC_S_LNG=_GSC_I64 + else + if test $ac_cv_sizeof_long = 16; then + _GSC_S_LNG=_GSC_I128 + fi + fi +fi +if test $ac_cv_sizeof_long_long = 4; then + _GSC_S_LNG_LNG=_GSC_I32 +else + if test $ac_cv_sizeof_long_long = 8; then + _GSC_S_LNG_LNG=_GSC_I64 + else + if test $ac_cv_sizeof_long_long = 16; then + _GSC_S_LNG_LNG=_GSC_I128 + fi + fi +fi -ac_header_dirent=no -for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do - as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5 -$as_echo_n "checking for $ac_hdr that defines DIR... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +#-------------------------------------------------------------------- +# Setup dynamic linking +#-------------------------------------------------------------------- +# Copyright (C) 2005 Free Software Foundation +# +# Copying and distribution of this file, with or without modification, +# are permitted in any medium without royalty provided the copyright +# notice and this notice are preserved. +#-------------------------------------------------------------------- +# Guess if we are using a object file format that supports automatic +# loading of constructor functions. +# +# If this system supports autoloading of constructors, that means that gcc +# doesn't have to do it for us via collect2. This routine tests for this +# in a very roundabout way by compiling a program with a constructor and +# testing the file, via nm, for certain symbols that collect2 includes to +# handle loading of constructors. +# +# Makes the following substitutions: +# Defines CON_AUTOLOAD (whether constructor functions are autoloaded) +#-------------------------------------------------------------------- +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking loading of constructor functions" >&5 +$as_echo_n "checking loading of constructor functions... " >&6; } +if ${objc_cv_con_autoload+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + if test "$cross_compiling" = yes; then : + objc_cv_con_autoload=no +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#include -#include <$ac_hdr> - -int -main () -{ -if ((DIR *) 0) -return 0; - ; - return 0; -} +static int loaded = 0; + void cons_functions() __attribute__ ((constructor)); + void cons_functions() { loaded = 1; } + int main() + { + return ( (loaded == 1) ? 0 : 1); + } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" +if ac_fn_c_try_run "$LINENO"; then : + objc_cv_con_autoload=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" + objc_cv_con_autoload=no fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 -_ACEOF -ac_header_dirent=$ac_hdr; break +case "$target_os" in + cygwin*) objc_cv_con_autoload=yes;; + mingw*) objc_cv_con_autoload=yes;; +esac + fi -done -# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. -if test $ac_header_dirent = dirent.h; then - { $as_echo "$as_me:$LINENO: checking for library containing opendir" >&5 -$as_echo_n "checking for library containing opendir... " >&6; } -if test "${ac_cv_search_opendir+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_func_search_save_LIBS=$LIBS -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +if test $objc_cv_con_autoload = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +$as_echo "#define CON_AUTOLOAD 1" >>confdefs.h -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char opendir (); -int -main () -{ -return opendir (); - ; - return 0; -} -_ACEOF -for ac_lib in '' dir; do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_search_opendir=$ac_res else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +# Copyright (C) 2005 Free Software Foundation +# Copying and distribution of this file, with or without modification, +# are permitted in any medium without royalty provided the copyright +# notice and this notice are preserved. +#-------------------------------------------------------------------- +# Guess the type of dynamic linker for the system +# +# Makes the following substitutions: +# DYNAMIC_LINKER - cooresponds to the interface that is included +# in objc-load.c (i.e. #include "${DYNAMIC_LINKER}-load.h") +#-------------------------------------------------------------------- +DYNAMIC_LINKER=null +ac_fn_c_check_header_mongrel "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default" +if test "x$ac_cv_header_dlfcn_h" = xyes; then : + DYNAMIC_LINKER=simple +fi + +if test $DYNAMIC_LINKER = null; then + ac_fn_c_check_header_mongrel "$LINENO" "dl.h" "ac_cv_header_dl_h" "$ac_includes_default" +if test "x$ac_cv_header_dl_h" = xyes; then : + DYNAMIC_LINKER=hpux fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext - if test "${ac_cv_search_opendir+set}" = set; then - break + fi -done -if test "${ac_cv_search_opendir+set}" = set; then - : -else - ac_cv_search_opendir=no +if test $DYNAMIC_LINKER = null; then + ac_fn_c_check_header_mongrel "$LINENO" "windows.h" "ac_cv_header_windows_h" "$ac_includes_default" +if test "x$ac_cv_header_windows_h" = xyes; then : + DYNAMIC_LINKER=win32 fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS + + fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 -$as_echo "$ac_cv_search_opendir" >&6; } -ac_res=$ac_cv_search_opendir -if test "$ac_res" != no; then - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" +if test $DYNAMIC_LINKER = null; then + ac_fn_c_check_header_mongrel "$LINENO" "dld/defs.h" "ac_cv_header_dld_defs_h" "$ac_includes_default" +if test "x$ac_cv_header_dld_defs_h" = xyes; then : + DYNAMIC_LINKER=dld +fi + fi -else - { $as_echo "$as_me:$LINENO: checking for library containing opendir" >&5 -$as_echo_n "checking for library containing opendir... " >&6; } -if test "${ac_cv_search_opendir+set}" = set; then +# NB: This is used as follows: in Source/Makefile.postamble we copy +# $(DYNAMIC_LINKER)-load.h into dynamic-load.h +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dynamic linker type" >&5 +$as_echo_n "checking for dynamic linker type... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $DYNAMIC_LINKER" >&5 +$as_echo "$DYNAMIC_LINKER" >&6; } + +if test $DYNAMIC_LINKER = simple; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dladdr in -ldl" >&5 +$as_echo_n "checking for dladdr in -ldl... " >&6; } +if ${ac_cv_lib_dl_dladdr+:} false; then : $as_echo_n "(cached) " >&6 else - ac_func_search_save_LIBS=$LIBS -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -17696,367 +6554,243 @@ #ifdef __cplusplus extern "C" #endif -char opendir (); +char dladdr (); int main () { -return opendir (); +return dladdr (); ; return 0; } _ACEOF -for ac_lib in '' x; do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_search_opendir=$ac_res +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dladdr=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_lib_dl_dladdr=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dladdr" >&5 +$as_echo "$ac_cv_lib_dl_dladdr" >&6; } +if test "x$ac_cv_lib_dl_dladdr" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBDL 1 +_ACEOF + LIBS="-ldl $LIBS" fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext - if test "${ac_cv_search_opendir+set}" = set; then - break -fi -done -if test "${ac_cv_search_opendir+set}" = set; then - : -else - ac_cv_search_opendir=no fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 -$as_echo "$ac_cv_search_opendir" >&6; } -ac_res=$ac_cv_search_opendir -if test "$ac_res" != no; then - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" -fi + +# NOTE: libdl should be in LIBS now if it's available. +for ac_func in dladdr +do : + ac_fn_c_check_func "$LINENO" "dladdr" "ac_cv_func_dladdr" +if test "x$ac_cv_func_dladdr" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLADDR 1 +_ACEOF fi +done #-------------------------------------------------------------------- -# This function needed by gdomap.c +# Check for pthread.h #-------------------------------------------------------------------- +for ac_header in pthread.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "pthread.h" "ac_cv_header_pthread_h" "$ac_includes_default" +if test "x$ac_cv_header_pthread_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_PTHREAD_H 1 +_ACEOF -for ac_header in getopt.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } + +done + +if test $ac_cv_header_pthread_h = yes ; then + # The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of pthread_mutex_t" >&5 +$as_echo_n "checking size of pthread_mutex_t... " >&6; } +if ${ac_cv_sizeof_pthread_mutex_t+:} false; then : + $as_echo_n "(cached) " >&6 else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (pthread_mutex_t))" "ac_cv_sizeof_pthread_mutex_t" "$ac_includes_default +#include +"; then : + else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + if test "$ac_cv_type_pthread_mutex_t" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (pthread_mutex_t) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_pthread_mutex_t=0 + fi +fi - ac_header_compiler=no fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_pthread_mutex_t" >&5 +$as_echo "$ac_cv_sizeof_pthread_mutex_t" >&6; } -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_preproc=no -fi +cat >>confdefs.h <<_ACEOF +#define SIZEOF_PTHREAD_MUTEX_T $ac_cv_sizeof_pthread_mutex_t +_ACEOF -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + GS_SIZEOF_MUTEX_T=$ac_cv_sizeof_pthread_mutex_t + if test $ac_cv_sizeof_pthread_mutex_t = 0 ; then + as_fn_error $? "Unable to find size of pthread_mutex_t (required)." "$LINENO" 5 + fi - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + # The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of pthread_cond_t" >&5 +$as_echo_n "checking size of pthread_cond_t... " >&6; } +if ${ac_cv_sizeof_pthread_cond_t+:} false; then : $as_echo_n "(cached) " >&6 else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (pthread_cond_t))" "ac_cv_sizeof_pthread_cond_t" "$ac_includes_default +#include +"; then : +else + if test "$ac_cv_type_pthread_cond_t" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (pthread_cond_t) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_pthread_cond_t=0 + fi fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_pthread_cond_t" >&5 +$as_echo "$ac_cv_sizeof_pthread_cond_t" >&6; } -done -#-------------------------------------------------------------------- -# This function needed by NSPage.m -#-------------------------------------------------------------------- +cat >>confdefs.h <<_ACEOF +#define SIZEOF_PTHREAD_COND_T $ac_cv_sizeof_pthread_cond_t +_ACEOF -for ac_func in posix_memalign valloc -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + if test $ac_cv_sizeof_pthread_cond_t = 0 ; then + as_fn_error $? "Unable to find size of pthread_cond_t (required)." "$LINENO" 5 + fi + GS_SIZEOF_COND_T=$ac_cv_sizeof_pthread_cond_t + + # The cast to long int works around a bug in the HP C Compiler, +# see AC_CHECK_SIZEOF for more information. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking alignment of pthread_mutex_t" >&5 +$as_echo_n "checking alignment of pthread_mutex_t... " >&6; } +if ${ac_cv_alignof_pthread_mutex_t+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ + if ac_fn_c_compute_int "$LINENO" "(long int) offsetof (ac__type_alignof_, y)" "ac_cv_alignof_pthread_mutex_t" "$ac_includes_default +#include -#ifdef __STDC__ -# include -#else -# include +#ifndef offsetof +# define offsetof(type, member) ((char *) &((type *) 0)->member - (char *) 0) #endif +typedef struct { char x; pthread_mutex_t y; } ac__type_alignof_;"; then : + +else + if test "$ac_cv_type_pthread_mutex_t" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute alignment of pthread_mutex_t +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_alignof_pthread_mutex_t=0 + fi +fi -#undef $ac_func +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_alignof_pthread_mutex_t" >&5 +$as_echo "$ac_cv_alignof_pthread_mutex_t" >&6; } -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif -int -main () -{ -return $ac_func (); - ; - return 0; -} + +cat >>confdefs.h <<_ACEOF +#define ALIGNOF_PTHREAD_MUTEX_T $ac_cv_alignof_pthread_mutex_t _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" + + + GS_ALIGNOF_MUTEX_T=$ac_cv_alignof_pthread_mutex_t + if test $ac_cv_alignof_pthread_mutex_t = 0 ; then + as_fn_error $? "Unable to find align of pthread_mutex_t (required)." "$LINENO" 5 + fi + + # The cast to long int works around a bug in the HP C Compiler, +# see AC_CHECK_SIZEOF for more information. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking alignment of pthread_cond_t" >&5 +$as_echo_n "checking alignment of pthread_cond_t... " >&6; } +if ${ac_cv_alignof_pthread_cond_t+:} false; then : + $as_echo_n "(cached) " >&6 else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + if ac_fn_c_compute_int "$LINENO" "(long int) offsetof (ac__type_alignof_, y)" "ac_cv_alignof_pthread_cond_t" "$ac_includes_default +#include - eval "$as_ac_var=no" -fi +#ifndef offsetof +# define offsetof(type, member) ((char *) &((type *) 0)->member - (char *) 0) +#endif +typedef struct { char x; pthread_cond_t y; } ac__type_alignof_;"; then : -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +else + if test "$ac_cv_type_pthread_cond_t" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute alignment of pthread_cond_t +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_alignof_pthread_cond_t=0 + fi fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF fi -done +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_alignof_pthread_cond_t" >&5 +$as_echo "$ac_cv_alignof_pthread_cond_t" >&6; } -#-------------------------------------------------------------------- -# This function needed by Time.m -#-------------------------------------------------------------------- -for ac_func in times -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +cat >>confdefs.h <<_ACEOF +#define ALIGNOF_PTHREAD_COND_T $ac_cv_alignof_pthread_cond_t _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif + if test $ac_cv_alignof_pthread_cond_t = 0 ; then + as_fn_error $? "Unable to find align of pthread_cond_t (required)." "$LINENO" 5 + fi + GS_ALIGNOF_COND_T=$ac_cv_alignof_pthread_cond_t -#undef $ac_func +else + as_fn_error $? "Unable to find pthread.h (needed for thread support)." "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_join in -lpthread" >&5 +$as_echo_n "checking for pthread_join in -lpthread... " >&6; } +if ${ac_cv_lib_pthread_pthread_join+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthread $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC @@ -18064,104 +6798,49 @@ #ifdef __cplusplus extern "C" #endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - +char pthread_join (); int main () { -return $ac_func (); +return pthread_join (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_pthread_pthread_join=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" + ac_cv_lib_pthread_pthread_join=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_join" >&5 +$as_echo "$ac_cv_lib_pthread_pthread_join" >&6; } +if test "x$ac_cv_lib_pthread_pthread_join" = xyes; then : + pthread_ok=yes +else + pthread_ok=no fi -done - -#-------------------------------------------------------------------- -# These functions needed by NSData.m and GSFFIInvocation.m -#-------------------------------------------------------------------- - -for ac_func in mkstemp -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +ismingw=no +case "$target_os" in + mingw*) ismingw=yes;; +esac +if test $pthread_ok = yes ; then + LIBS="$LIBS -lpthread" +else + if test $ismingw = yes ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_join in -lpthreadGC2" >&5 +$as_echo_n "checking for pthread_join in -lpthreadGC2... " >&6; } +if ${ac_cv_lib_pthreadGC2_pthread_join+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthreadGC2 $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC @@ -18169,100 +6848,52 @@ #ifdef __cplusplus extern "C" #endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - +char pthread_join (); int main () { -return $ac_func (); +return pthread_join (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_pthreadGC2_pthread_join=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" + ac_cv_lib_pthreadGC2_pthread_join=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthreadGC2_pthread_join" >&5 +$as_echo "$ac_cv_lib_pthreadGC2_pthread_join" >&6; } +if test "x$ac_cv_lib_pthreadGC2_pthread_join" = xyes; then : + pthread_ok=yes +else + pthread_ok=no fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF + if test $pthread_ok = yes ; then + LIBS="$LIBS -lpthreadGC2" + fi + fi +fi +if test $pthread_ok = no ; then + as_fn_error $? "Unable to find pthread library (needed for thread support)." "$LINENO" 5 fi -done -for ac_func in shmctl -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +# Typically need librt on Solaris for sched_yield +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sched_yield in -lrt" >&5 +$as_echo_n "checking for sched_yield in -lrt... " >&6; } +if ${ac_cv_lib_rt_sched_yield+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + ac_check_lib_save_LIBS=$LIBS +LIBS="-lrt $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC @@ -18270,62 +6901,45 @@ #ifdef __cplusplus extern "C" #endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - +char sched_yield (); int main () { -return $ac_func (); +return sched_yield (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_rt_sched_yield=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" + ac_cv_lib_rt_sched_yield=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_rt_sched_yield" >&5 +$as_echo "$ac_cv_lib_rt_sched_yield" >&6; } +if test "x$ac_cv_lib_rt_sched_yield" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBRT 1 +_ACEOF + + LIBS="-lrt $LIBS" -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then + + + +#-------------------------------------------------------------------- +# One of these function needed by NSThread.m and objc initialize test +#-------------------------------------------------------------------- +for ac_func in nanosleep usleep Sleep +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF @@ -18334,708 +6948,732 @@ done -for ac_func in mmap -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +#-------------------------------------------------------------------- +# Check whether Objective-C /really/ works +#-------------------------------------------------------------------- +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether objc really works" >&5 +$as_echo_n "checking whether objc really works... " >&6; } +saved_LIBS="$LIBS" +saved_CPPFLAGS="$CPPFLAGS" +LIBS="$LIBS $LIBOBJC" +CPPFLAGS="$CPPFLAGS $OBJCFLAGS -x objective-c" +if test x"$objc_threaded" != x""; then + LIBS="$LIBS $objc_threaded" +fi +LIBS="$LIBS $extra_LIBS" +if ${gs_cv_objc_works+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + if test "$cross_compiling" = yes; then : + gs_cv_objc_works=yes +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func +#include "$srcdir/config/config.objc.m" +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + gs_cv_objc_works=yes +else + gs_cv_objc_works=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif +fi -#undef $ac_func +if test $gs_cv_objc_works = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + echo "I don't seem to be able to use your Objective-C compiler to produce" + echo "working binaries! Please check your Objective-C compiler installation." + echo "If you are using gcc-3.x make sure that your compiler's libgcc_s and libobjc" + echo "can be found by the dynamic linker - usually that requires you to play" + echo "with LD_LIBRARY_PATH or /etc/ld.so.conf." + echo "Please refer to your compiler installation instructions for more help." + as_fn_error $? "The Objective-C compiler does not work or is not installed properly." "$LINENO" 5 +fi -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif +# Don't revert any Objective-C flags as they are used in the next test -int -main () -{ -return $ac_func (); - ; - return 0; -} +#--------------------------------------------------------------------- +# See if we are using a compiler which allows us to change the class +# to be used for constant strings by using the -fconstant-string-class +# option. If that is the case, we change it to NSConstantString. +# Unless we are building for the apple runtime (ie only building base +# additions library and not implementing a constant string class). +#--------------------------------------------------------------------- +if test "$OBJC_RUNTIME_LIB" = "nx" -o "$OBJC_RUNTIME_LIB" = "apple"; then + NX_CONST_STRING_OBJCFLAGS="" + NX_CONST_STRING_CLASS=NXConstantString +else + strclass_CPPFLAGS="$CPPFLAGS" + CPPFLAGS="$CPPFLAGS -fconstant-string-class=FooConstantString" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the compiler supports -fconstant-string-class" >&5 +$as_echo_n "checking if the compiler supports -fconstant-string-class... " >&6; } + if ${gs_cv_objc_compiler_supports_constant_string_class+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + gs_cv_objc_compiler_supports_constant_string_class=no +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include "$srcdir/config/config.constant-string-class.m" _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" +if ac_fn_c_try_run "$LINENO"; then : + gs_cv_objc_compiler_supports_constant_string_class=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + gs_cv_objc_compiler_supports_constant_string_class=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + - eval "$as_ac_var=no" fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext + if test $gs_cv_objc_compiler_supports_constant_string_class = yes; then + NX_CONST_STRING_OBJCFLAGS="-fconstant-string-class=NSConstantString" + NX_CONST_STRING_CLASS=NSConstantString + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + # Check whether --enable-nxconstantstring was given. +if test "${enable_nxconstantstring+set}" = set; then : + enableval=$enable_nxconstantstring; +else + enable_nxconstantstring=no fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF + if test $enable_nxconstantstring = yes; then + NX_CONST_STRING_OBJCFLAGS="" + NX_CONST_STRING_CLASS=NXConstantString + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You have enabled the use of NXConstantString as the string class in gnustep-base. The objective-c runtime library typically implements its own class of the same name, so you must either enforce a link order which ensures that the gnustep-base implementation is used, or (better) you must remove the class from the runtime library!" >&5 +$as_echo "$as_me: WARNING: You have enabled the use of NXConstantString as the string class in gnustep-base. The objective-c runtime library typically implements its own class of the same name, so you must either enforce a link order which ensures that the gnustep-base implementation is used, or (better) you must remove the class from the runtime library!" >&2;} + else + as_fn_error $? "Your compiler does not appear to implement the -fconstant-string-class option needed for support of strings. Please check for a more recent version or consider using --enable-nxconstantstring" "$LINENO" 5 + fi + fi + CPPFLAGS="$strclass_CPPFLAGS" fi -done -for ac_func in mprotect -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + + +# Don't revert any Objective-C flags as they are used in the next test + +#--------------------------------------------------------------------- +# Guess if we are using a compiler which has the (GNU extension) +load +# method which is executed before main. +# Defines HAVE_LOAD_METHOD if +load methods are called before main. +# Needed by NSProcessInfo.m +#--------------------------------------------------------------------- +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if +load method is executed before main" >&5 +$as_echo_n "checking if +load method is executed before main... " >&6; } +if ${gs_cv_objc_load_method_worked+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + if test "$cross_compiling" = yes; then : + gs_cv_objc_load_method_worked=no +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func +#include "$srcdir/config/config.loadtest.m" +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + gs_cv_objc_load_method_worked=yes +else + gs_cv_objc_load_method_worked=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif +fi -#undef $ac_func +if test $gs_cv_objc_load_method_worked = yes; then -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif +$as_echo "#define HAVE_LOAD_METHOD 1" >>confdefs.h -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + +# Don't revert any Objective-C flags as they are used in the next test + +#-------------------------------------------------------------------- +# Check for thread synchronisation support in runtime +#-------------------------------------------------------------------- +for ac_func in objc_sync_enter +do : + ac_fn_c_check_func "$LINENO" "objc_sync_enter" "ac_cv_func_objc_sync_enter" +if test "x$ac_cv_func_objc_sync_enter" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_OBJC_SYNC_ENTER 1 +_ACEOF - eval "$as_ac_var=no" fi +done -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +if test $ac_cv_func_objc_sync_enter = yes ; then + OBJCSYNC=1 +else + OBJCSYNC=0 fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then + + +# Don't revert any Objective-C flags as they are used in the next test + +#-------------------------------------------------------------------- +# Check for ObjC2 support in runtime +#-------------------------------------------------------------------- +for ac_func in objc_setProperty +do : + ac_fn_c_check_func "$LINENO" "objc_setProperty" "ac_cv_func_objc_setProperty" +if test "x$ac_cv_func_objc_setProperty" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +#define HAVE_OBJC_SETPROPERTY 1 _ACEOF fi done +if test $ac_cv_func_objc_setProperty = yes ; then + OBJC2RUNTIME=1 +else + OBJC2RUNTIME=0 +fi + + +#-------------------------------------------------------------------- +# Check for blocks support in runtime +#-------------------------------------------------------------------- +for ac_func in _Block_copy +do : + ac_fn_c_check_func "$LINENO" "_Block_copy" "ac_cv_func__Block_copy" +if test "x$ac_cv_func__Block_copy" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE__BLOCK_COPY 1 +_ACEOF -for ac_header in sys/mman.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } +done + +if test $ac_cv_func__Block_copy = yes ; then + HAVE_BLOCKS=1 else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + HAVE_BLOCKS=0 +fi + + +# Don't revert any Objective-C flags as they are used in the next test + +GS_NONFRAGILE=0 +GS_MIXEDABI=0 +if test "$nonfragile" = "yes"; then + saved_CPPFLAGS="$CPPFLAGS" + CPPFLAGS="$CPPFLAGS $OBJCFLAGS -fobjc-nonfragile-abi -x objective-c" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-fragile-abi support" >&5 +$as_echo_n "checking for non-fragile-abi support... " >&6; } + if test "$cross_compiling" = yes; then : + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> +#include "$srcdir/config/config.non-fragile-ivars.m" _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes +if ac_fn_c_try_run "$LINENO"; then : + non_fragile=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + non_fragile=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi - ac_header_compiler=no + CPPFLAGS="$saved_CPPFLAGS" + if test $non_fragile = yes; then + OBJCFLAGS="$OBJCFLAGS -fobjc-nonfragile-abi" + GS_NONFRAGILE=1 + # Check whether --enable-mixedabi was given. +if test "${enable_mixedabi+set}" = set; then : + enableval=$enable_mixedabi; +else + enable_mixedabi=yes fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } + if test $enable_mixedabi = yes; then + GS_MIXEDABI=1 + fi + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $non_fragile" >&5 +$as_echo "$non_fragile" >&6; } +fi -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + + + +# Don't revert any Objective-C flags as they are used in the next test + +#-------------------------------------------------------------------- +# get_uninstalled_dtable used by behavior.m and objc-load.m +#-------------------------------------------------------------------- +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#include <$ac_header> +#include + _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "objc_get_uninstalled_dtable" >/dev/null 2>&1; then : + +$as_echo "#define HAVE_OBJC_GET_UNINSTALLED_DTABLE 1" >>confdefs.h - ac_header_preproc=no fi +rm -f conftest* -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +# Don't revert any Objective-C flags as they are used in the next test - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 + +#-------------------------------------------------------------------- +# Native Objective-C exceptions +#-------------------------------------------------------------------- + +# First of all, determine if native Objective-C exceptions are enabled +# in gnustep-make. They are enabled if the compiler supports it; they +# are disabled if it doesn't. And, of course, the user may have +# forced one behaviour or the other. Note that we go and look at the +# actual config.make file to be able to know what was configured in +# gnustep-make regardless of any gnustep-base that is currently +# installed. We can't use `gnustep-config --objc-flags` because that +# may report native exceptions as disabled because the currently +# installed gnustep-base has them disabled. +if grep USE_OBJC_EXCEPTIONS $CURRENT_GNUSTEP_MAKEFILES/$lobj_dir/config.make | grep yes >&5 2>&5; then + exceptions=yes else - eval "$as_ac_Header=\$ac_header_preproc" + exceptions=no fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF +# At this point, if exceptions=no, then native exceptions are disabled +# and won't be used. If exceptions=yes, we need to check if they work +# and if the runtime has proper support for them. If it does, we'll +# happily use them; if it doesn't, we'll automatically disable them +# because they don't work. ;-) + +#-------------------------------------------------------------------- +# One of these is needed by for handling uncaught exceptions +#-------------------------------------------------------------------- + +# TODO: These checks are not really needed if native exceptions are +# disabled. So maybe we should not run them at all in that case. On +# the other hand, that case is going to become more and more unusual. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objc_setUncaughtExceptionHandler() in runtime" >&5 +$as_echo_n "checking for objc_setUncaughtExceptionHandler() in runtime... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include "$srcdir/config/config.setUncaughtExceptionHandler.m" +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + have_set_uncaught_exception_handler=yes +else + have_set_uncaught_exception_handler=no fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test $have_set_uncaught_exception_handler = yes; then -done +$as_echo "#define HAVE_SET_UNCAUGHT_EXCEPTION_HANDLER 1" >>confdefs.h +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_set_uncaught_exception_handler" >&5 +$as_echo "$have_set_uncaught_exception_handler" >&6; } -#-------------------------------------------------------------------- -# These functions needed by NSTask.m -#-------------------------------------------------------------------- +# Don't revert any Objective-C flags as they are used in the next test + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objc_set_unexpected() in runtime" >&5 +$as_echo_n "checking for objc_set_unexpected() in runtime... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include "$srcdir/config/config.set_unexpected.m" +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + have_set_unexpected=yes +else + have_set_unexpected=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test $have_set_unexpected = yes; then +$as_echo "#define HAVE_SET_UNEXPECTED 1" >>confdefs.h +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_set_unexpected" >&5 +$as_echo "$have_set_unexpected" >&6; } +# Don't revert any Objective-C flags as they are used in the next test -for ac_func in killpg setpgrp setpgid setsid -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for _objc_unexpected_exception in runtime" >&5 +$as_echo_n "checking for _objc_unexpected_exception in runtime... " >&6; } +if test "$cross_compiling" = yes; then : + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func +#include "$srcdir/config/config.unexpected.m" +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + have_unexpected=yes +else + have_unexpected=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ +if test $have_unexpected = yes; then -#ifdef __STDC__ -# include -#else -# include -#endif +$as_echo "#define HAVE_UNEXPECTED 1" >>confdefs.h -#undef $ac_func +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_unexpected" >&5 +$as_echo "$have_unexpected" >&6; } -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif +# TODO: It would also be nice to actually test that native Objective-C +# exceptions work. -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if test "$exceptions" = "yes"; then + if test x"$have_set_uncaught_exception_handler" = x"no"; then + if test x"$have_set_unexpected" = x"no"; then + if test x"$have_unexpected" = x"no"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: Disabling native Objective-C exceptions because the ObjC runtime" >&5 +$as_echo "$as_me: Disabling native Objective-C exceptions because the ObjC runtime" >&6;} + { $as_echo "$as_me:${as_lineno-$LINENO}: has no way to set an uncaught exception handler. Please install" >&5 +$as_echo "$as_me: has no way to set an uncaught exception handler. Please install" >&6;} + { $as_echo "$as_me:${as_lineno-$LINENO}: a recent Objective-C runtime if you want to use them." >&5 +$as_echo "$as_me: a recent Objective-C runtime if you want to use them." >&6;} + exceptions="no"; + fi + fi + fi +fi - eval "$as_ac_var=no" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable native Objective-C exceptions" >&5 +$as_echo_n "checking whether to enable native Objective-C exceptions... " >&6; } +if test "$exceptions" = "yes"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + BASE_NATIVE_OBJC_EXCEPTIONS=1 +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + BASE_NATIVE_OBJC_EXCEPTIONS=0 fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then + +# Don't revert any Objective-C flags as they are used in the next test + +#-------------------------------------------------------------------- +# Function needed by @synchronize directive +#-------------------------------------------------------------------- +for ac_func in objc_sync_enter +do : + ac_fn_c_check_func "$LINENO" "objc_sync_enter" "ac_cv_func_objc_sync_enter" +if test "x$ac_cv_func_objc_sync_enter" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +#define HAVE_OBJC_SYNC_ENTER 1 _ACEOF fi done -if test "x$ac_cv_func_setpgrp" = xyes; then - { $as_echo "$as_me:$LINENO: checking whether setpgrp takes no argument" >&5 -$as_echo_n "checking whether setpgrp takes no argument... " >&6; } -if test "${ac_cv_func_setpgrp_void+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then - { { $as_echo "$as_me:$LINENO: error: cannot check setpgrp when cross compiling" >&5 -$as_echo "$as_me: error: cannot check setpgrp when cross compiling" >&2;} - { (exit 1); exit 1; }; } + +HAVE_OBJC_SYNC_ENTER=no +if test $ac_cv_func_objc_sync_enter = yes ; then + HAVE_OBJC_SYNC_ENTER=yes +fi + + +# Don't revert any Objective-C flags as they are used in the next test + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for thread-safe +initialize in runtime" >&5 +$as_echo_n "checking for thread-safe +initialize in runtime... " >&6; } +if test "$cross_compiling" = yes; then : + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -$ac_includes_default -int -main () -{ -/* If this system has a BSD-style setpgrp which takes arguments, - setpgrp(1, 1) will fail with ESRCH and return -1, in that case - exit successfully. */ - return setpgrp (1,1) != -1; - ; - return 0; -} +#include "$srcdir/config/config.initialize.m" _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_setpgrp_void=no +if ac_fn_c_try_run "$LINENO"; then : + safe_initialize=yes else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_setpgrp_void=yes + safe_initialize=no fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi +if test $safe_initialize = yes; then + +$as_echo "#define HAVE_INITIALIZE 1" >>confdefs.h +else + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Your ObjectiveC runtime does not support thread-safe class initialisation. Please use a different runtime if you intend to use threads." >&5 +$as_echo "$as_me: WARNING: Your ObjectiveC runtime does not support thread-safe class initialisation. Please use a different runtime if you intend to use threads." >&2;} fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_setpgrp_void" >&5 -$as_echo "$ac_cv_func_setpgrp_void" >&6; } -if test $ac_cv_func_setpgrp_void = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $safe_initialize" >&5 +$as_echo "$safe_initialize" >&6; } -cat >>confdefs.h <<\_ACEOF -#define SETPGRP_VOID 1 -_ACEOF +LIBS="$saved_LIBS" +CPPFLAGS="$saved_CPPFLAGS" -fi -fi -HAVE_PTS_STREAM_MODULES=0 -case "${target}" in - *-sysv-*) - HAVE_PTS_STREAM_MODULES=1 - ;; -esac +#-------------------------------------------------------------------- +# Generic settings needed by NSZone.m +#-------------------------------------------------------------------- +ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" +if test "x$ac_cv_type_size_t" = xyes; then : + +else cat >>confdefs.h <<_ACEOF -#define HAVE_PTS_STREAM_MODULES $HAVE_PTS_STREAM_MODULES +#define size_t unsigned int _ACEOF +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5 +$as_echo_n "checking for inline... " >&6; } +if ${ac_cv_c_inline+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_c_inline=no +for ac_kw in inline __inline__ __inline; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifndef __cplusplus +typedef int foo_t; +static $ac_kw foo_t static_foo () {return 0; } +$ac_kw foo_t foo () {return 0; } +#endif +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_inline=$ac_kw +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + test "$ac_cv_c_inline" != no && break +done +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5 +$as_echo "$ac_cv_c_inline" >&6; } +case $ac_cv_c_inline in + inline | yes) ;; + *) + case $ac_cv_c_inline in + no) ac_val=;; + *) ac_val=$ac_cv_c_inline;; + esac + cat >>confdefs.h <<_ACEOF +#ifndef __cplusplus +#define inline $ac_val +#endif +_ACEOF + ;; +esac +#-------------------------------------------------------------------- +# Following header checks needed for bzero in Storage.m and other places +#-------------------------------------------------------------------- +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include +int +main () +{ + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : +else + ac_cv_header_stdc=no +fi +rm -f conftest* +fi +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : +else + ac_cv_header_stdc=no +fi +rm -f conftest* +fi +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then +$as_echo "#define STDC_HEADERS 1" >>confdefs.h -for ac_header in fcntl.h inttypes.h libc.h limits.h malloc.h memory.h signal.h stdint.h string.h sys/fcntl.h sys/file.h sys/inttypes.h sys/ioctl.h sys/signal.h sys/stropts.h sys/wait.h unistd.h utime.h stdlib.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> + +for ac_header in string.h memory.h alloca.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_compiler=no fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } +done -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> + +#-------------------------------------------------------------------- +# Following header check needed NSConnection.h +#-------------------------------------------------------------------- +for ac_header in float.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "float.h" "ac_cv_header_float_h" "$ac_includes_default" +if test "x$ac_cv_header_float_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_FLOAT_H 1 _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_preproc=no fi -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } +done -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" +#-------------------------------------------------------------------- +# Header files and functions for files and filesystems +#-------------------------------------------------------------------- +for ac_header in sys/stat.h sys/vfs.h sys/statfs.h sys/statvfs.h pwd.h grp.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then +done + +for ac_header in sys/cdefs.h sys/syslimits.h sys/param.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF @@ -19044,398 +7682,284 @@ done +# Twisted header checks for some BSDs with stupid interdependencies +for ac_header in sys/syslimits.h +do : + ac_fn_c_check_header_compile "$LINENO" "sys/syslimits.h" "ac_cv_header_sys_syslimits_h" "#if HAVE_SYS_CDEFS_H + #include + #endif + #include -if test $ac_cv_header_stdint_h = yes; then -INCLUDE_STDINT="#include " -elif test $ac_cv_header_inttypes_h = yes; then -INCLUDE_STDINT="#include " -elif test $ac_cv_header_sys_inttypes_h = yes; then -INCLUDE_STDINT="#include " -else -INCLUDE_STDINT="no" -fi +" +if test "x$ac_cv_header_sys_syslimits_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SYS_SYSLIMITS_H 1 +_ACEOF -if test "$INCLUDE_STDINT" = "no"; then -INCLUDE_STDINT="" -DEFINE_INT8_T="#define int8_t gss8" -DEFINE_UINT8_T="#define uint8_t gsu8" -DEFINE_INT16_T="#define int16_t gss16" -DEFINE_UINT16_T="#define uint16_t gsu16" -DEFINE_INT32_T="#define int32_t gss32" -DEFINE_UINT32_T="#define uint32_t gsu32" -DEFINE_INT64_T="#define int64_t gss64" -DEFINE_UINT64_T="#define uint64_t gsu64" -DEFINE_INTPTR_T="#define intptr_t gssaddr" -DEFINE_UINTPTR_T="#define uintptr_t gsuaddr" -else -DEFINE_INT8_T="" -DEFINE_UINT8_T="" -DEFINE_INT16_T="" -DEFINE_UINT16_T="" -DEFINE_INT32_T="" -DEFINE_UINT32_T="" -DEFINE_INT64_T="" -DEFINE_UINT64_T="" -DEFINE_INTPTR_T="" -DEFINE_UINTPTR_T="" fi +done +for ac_header in sys/param.h +do : + ac_fn_c_check_header_compile "$LINENO" "sys/param.h" "ac_cv_header_sys_param_h" "#if HAVE_SYS_CDEFS_H + #include + #endif + #if HAVE_SYS_SYSLIMITS_H + #include + #endif +" +if test "x$ac_cv_header_sys_param_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SYS_PARAM_H 1 +_ACEOF +fi +done +for ac_header in sys/mount.h +do : + ac_fn_c_check_header_compile "$LINENO" "sys/mount.h" "ac_cv_header_sys_mount_h" "#if HAVE_SYS_CDEFS_H + #include + #endif + #if HAVE_SYS_SYSLIMITS_H + #include + #endif + #if HAVE_SYS_PARAM_H + #include + #endif +" +if test "x$ac_cv_header_sys_mount_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SYS_MOUNT_H 1 +_ACEOF +fi +done +for ac_header in sys/types.h windows.h locale.h langinfo.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF +fi +done -#-------------------------------------------------------------------- -# These used by GSFileHandle.m and distributed objects -# On some systems we need -lnsl ... so check for that first. -#-------------------------------------------------------------------- - -{ $as_echo "$as_me:$LINENO: checking for inet_ntop in -lnsl" >&5 -$as_echo_n "checking for inet_ntop in -lnsl... " >&6; } -if test "${ac_cv_lib_nsl_inet_ntop+set}" = set; then +saved_LIBS="$LIBS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lm" >&5 +$as_echo_n "checking for main in -lm... " >&6; } +if ${ac_cv_lib_m_main+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS -LIBS="-lnsl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char inet_ntop (); + int main () { -return inet_ntop (); +return main (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_nsl_inet_ntop=yes +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_main=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_nsl_inet_ntop=no + ac_cv_lib_m_main=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_inet_ntop" >&5 -$as_echo "$ac_cv_lib_nsl_inet_ntop" >&6; } -if test "x$ac_cv_lib_nsl_inet_ntop" = x""yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_main" >&5 +$as_echo "$ac_cv_lib_m_main" >&6; } +if test "x$ac_cv_lib_m_main" = xyes; then : cat >>confdefs.h <<_ACEOF -#define HAVE_LIBNSL 1 +#define HAVE_LIBM 1 _ACEOF - LIBS="-lnsl $LIBS" + LIBS="-lm $LIBS" fi +for ac_func in statvfs link symlink readlink geteuid getlogin getpwnam getpwnam_r getpwuid getpwuid_r getgrgid getgrgid_r getgrnam getgrnam_r rint getopt +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF +fi +done +LIBS="$saved_LIBS" +#-------------------------------------------------------------------- +# These two headers (functions) needed by Time.m +#-------------------------------------------------------------------- - -for ac_func in gethostbyaddr_r inet_aton inet_pton inet_ntop sigaction -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +for ac_header in time.h sys/time.h tzfile.h sys/rusage.h ucbinclude/sys/resource.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ +fi -#ifdef __STDC__ -# include -#else -# include -#endif +done -#undef $ac_func +for ac_func in time ctime tzset +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif +fi +done + + +# Check if tzfile contains the proper definitions +if test $ac_cv_header_tzfile_h = yes; then + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include -int -main () -{ -return $ac_func (); - ; - return 0; -} _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "tzhead" >/dev/null 2>&1; then : + +$as_echo "#define HAVE_TZHEAD 1" >>confdefs.h - eval "$as_ac_var=no" fi +rm -f conftest* -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then + +#-------------------------------------------------------------------- +# These headers/functions needed by GSTcpPort.m +#-------------------------------------------------------------------- +for ac_header in sys/socket.h netinet/in.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi + done -USE_ZLIB=0 +ac_fn_c_check_type "$LINENO" "socklen_t" "ac_cv_type_socklen_t" "$ac_includes_default" +if test "x$ac_cv_type_socklen_t" = xyes; then : -for ac_header in zlib.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> +cat >>confdefs.h <<_ACEOF +#define HAVE_SOCKLEN_T 1 _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_compiler=no + fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes +#-------------------------------------------------------------------- +# These headers/functions needed for stacktrace in NSException.m +#-------------------------------------------------------------------- +PASS_ARG=no +# Check whether --enable-bfd was given. +if test "${enable_bfd+set}" = set; then : + enableval=$enable_bfd; else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + enable_bfd=$PASS_ARG +fi + + +if test $enable_bfd = yes; then + for ac_header in bfd.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "bfd.h" "ac_cv_header_bfd_h" "$ac_includes_default" +if test "x$ac_cv_header_bfd_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_BFD_H 1 +_ACEOF - ac_header_preproc=no fi -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +done - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dyn_string_append in -liberty" >&5 +$as_echo_n "checking for dyn_string_append in -liberty... " >&6; } +if ${ac_cv_lib_iberty_dyn_string_append+:} false; then : $as_echo_n "(cached) " >&6 else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } + ac_check_lib_save_LIBS=$LIBS +LIBS="-liberty $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dyn_string_append (); +int +main () +{ +return dyn_string_append (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_iberty_dyn_string_append=yes +else + ac_cv_lib_iberty_dyn_string_append=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_iberty_dyn_string_append" >&5 +$as_echo "$ac_cv_lib_iberty_dyn_string_append" >&6; } +if test "x$ac_cv_lib_iberty_dyn_string_append" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define HAVE_LIBIBERTY 1 _ACEOF -fi + LIBS="-liberty $LIBS" -done +fi -if test $ac_cv_header_zlib_h = yes; then - { $as_echo "$as_me:$LINENO: checking for gzseek in -lz" >&5 -$as_echo_n "checking for gzseek in -lz... " >&6; } -if test "${ac_cv_lib_z_gzseek+set}" = set; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for bfd_openr in -lbfd" >&5 +$as_echo_n "checking for bfd_openr in -lbfd... " >&6; } +if ${ac_cv_lib_bfd_bfd_openr+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS -LIBS="-lz $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +LIBS="-lbfd $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -19444,467 +7968,307 @@ #ifdef __cplusplus extern "C" #endif -char gzseek (); +char bfd_openr (); int main () { -return gzseek (); +return bfd_openr (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_z_gzseek=yes +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_bfd_bfd_openr=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_z_gzseek=no + ac_cv_lib_bfd_bfd_openr=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_z_gzseek" >&5 -$as_echo "$ac_cv_lib_z_gzseek" >&6; } -if test "x$ac_cv_lib_z_gzseek" = x""yes; then - zlib_ok=yes -else - zlib_ok=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_bfd_bfd_openr" >&5 +$as_echo "$ac_cv_lib_bfd_bfd_openr" >&6; } +if test "x$ac_cv_lib_bfd_bfd_openr" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBBFD 1 +_ACEOF + + LIBS="-lbfd $LIBS" + fi - if test "$zlib_ok" = yes; then - LIBS="$LIBS -lz" - USE_ZLIB=1 - fi +else + for ac_header in execinfo.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "execinfo.h" "ac_cv_header_execinfo_h" "$ac_includes_default" +if test "x$ac_cv_header_execinfo_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_EXECINFO_H 1 +_ACEOF + fi +done + + for ac_func in backtrace +do : + ac_fn_c_check_func "$LINENO" "backtrace" "ac_cv_func_backtrace" +if test "x$ac_cv_func_backtrace" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_BACKTRACE 1 +_ACEOF -HAVE_INET_PTON=no -if test $ac_cv_func_inet_pton = yes ; then - HAVE_INET_PTON=yes fi +done +fi +for ac_func in __builtin_extract_return_address +do : + ac_fn_c_check_func "$LINENO" "__builtin_extract_return_address" "ac_cv_func___builtin_extract_return_address" +if test "x$ac_cv_func___builtin_extract_return_address" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE___BUILTIN_EXTRACT_RETURN_ADDRESS 1 +_ACEOF -HAVE_INET_NTOP=no -if test $ac_cv_func_inet_ntop = yes ; then - HAVE_INET_NTOP=yes fi +done #-------------------------------------------------------------------- -# For setting thread stack size +# These headers/functions needed by NSLog.m #-------------------------------------------------------------------- - -for ac_header in sys/resource.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> +for ac_header in syslog.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "syslog.h" "ac_cv_header_syslog_h" "$ac_includes_default" +if test "x$ac_cv_header_syslog_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SYSLOG_H 1 _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_compiler=no fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } +done -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> +for ac_func in syslog +do : + ac_fn_c_check_func "$LINENO" "syslog" "ac_cv_func_syslog" +if test "x$ac_cv_func_syslog" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SYSLOG 1 _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_preproc=no fi +done -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +#-------------------------------------------------------------------- +# These headers/functions needed by NSRunLoop.m +#-------------------------------------------------------------------- +for ac_header in poll.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "poll.h" "ac_cv_header_poll_h" "$ac_includes_default" +if test "x$ac_cv_header_poll_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_POLL_H 1 +_ACEOF - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then +done + +for ac_func in poll +do : + ac_fn_c_check_func "$LINENO" "poll" "ac_cv_func_poll" +if test "x$ac_cv_func_poll" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define HAVE_POLL 1 _ACEOF fi - done +have_poll=no +if test $ac_cv_header_poll_h = yes; then + have_poll=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for poll emulation" >&5 +$as_echo_n "checking for poll emulation... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include "config/config.poll.c" +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "emulating_poll" >/dev/null 2>&1; then : + have_poll=no +fi +rm -f conftest* -for ac_func in setrlimit -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 + if test $have_poll = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if poll supports devices" >&5 +$as_echo_n "checking if poll supports devices... " >&6; } + if test "$cross_compiling" = yes; then : + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func +#include "$srcdir/config/config.poll-dev.c" +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ +else + have_poll=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi -#ifdef __STDC__ -# include -#else -# include -#endif + if test $have_poll = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } -#undef $ac_func +$as_echo "#define HAVE_POLL_F 1" >>confdefs.h -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + fi +fi -int -main () -{ -return $ac_func (); - ; - return 0; -} +#-------------------------------------------------------------------- +# This function needed by StdioStream.m +#-------------------------------------------------------------------- +for ac_func in vsprintf vasprintf snprintf vsnprintf +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" + +fi +done + +if test $ac_cv_func_vsprintf = yes ; then + if test "$cross_compiling" = yes; then : + VSPRINTF_RETURNS_LENGTH=1 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include "$srcdir/config/config.vsprintf.c" +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + VSPRINTF_RETURNS_LENGTH=1 else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" + VSPRINTF_RETURNS_LENGTH=0 fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 + + +cat >>confdefs.h <<_ACEOF +#define VSPRINTF_RETURNS_LENGTH $VSPRINTF_RETURNS_LENGTH _ACEOF fi -done +if test $ac_cv_func_vasprintf = yes ; then + if test "$cross_compiling" = yes; then : + VASPRINTF_RETURNS_LENGTH=1 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include "$srcdir/config/config.vasprintf.c" +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + VASPRINTF_RETURNS_LENGTH=1 +else + VASPRINTF_RETURNS_LENGTH=0 +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + +cat >>confdefs.h <<_ACEOF +#define VASPRINTF_RETURNS_LENGTH $VASPRINTF_RETURNS_LENGTH +_ACEOF +fi #-------------------------------------------------------------------- -# One of these functions needed by NSDebug.m and NSProcessInfo.m +# This function needed by NSFileManager.m #-------------------------------------------------------------------- +for ac_func in getcwd +do : + ac_fn_c_check_func "$LINENO" "getcwd" "ac_cv_func_getcwd" +if test "x$ac_cv_func_getcwd" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_GETCWD 1 +_ACEOF +fi +done -for ac_func in strerror_r strerror -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +ac_header_dirent=no +for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do + as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_hdr that defines DIR" >&5 +$as_echo_n "checking for $ac_hdr that defines DIR... " >&6; } +if eval \${$as_ac_Header+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif +#include +#include <$ac_hdr> int main () { -return $ac_func (); +if ((DIR *) 0) +return 0; ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" +if ac_fn_c_try_compile "$LINENO"; then : + eval "$as_ac_Header=yes" else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" + eval "$as_ac_Header=no" fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +eval ac_res=\$$as_ac_Header + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +#define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 _ACEOF +ac_header_dirent=$ac_hdr; break fi -done - - -#-------------------------------------------------------------------- -# Needed by NSDebug.m -#-------------------------------------------------------------------- -for ac_func in sigsetjmp -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +done +# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. +if test $ac_header_dirent = dirent.h; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 +$as_echo_n "checking for library containing opendir... " >&6; } +if ${ac_cv_search_opendir+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC @@ -19912,729 +8276,358 @@ #ifdef __cplusplus extern "C" #endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - +char opendir (); int main () { -return $ac_func (); +return opendir (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" +for ac_lib in '' dir; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_opendir=$ac_res fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_opendir+:} false; then : + break fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF +done +if ${ac_cv_search_opendir+:} false; then : +else + ac_cv_search_opendir=no fi -done +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 +$as_echo "$ac_cv_search_opendir" >&6; } +ac_res=$ac_cv_search_opendir +if test "$ac_res" != no; then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" +fi -#-------------------------------------------------------------------- -# This type needed by GSFormat -#-------------------------------------------------------------------- -{ $as_echo "$as_me:$LINENO: checking for uintmax_t" >&5 -$as_echo_n "checking for uintmax_t... " >&6; } -if test "${ac_cv_type_uintmax_t+set}" = set; then +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 +$as_echo_n "checking for library containing opendir... " >&6; } +if ${ac_cv_search_opendir+:} false; then : $as_echo_n "(cached) " >&6 else - ac_cv_type_uintmax_t=no -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if (sizeof (uintmax_t)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -$ac_includes_default + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char opendir (); int main () { -if (sizeof ((uintmax_t))) - return 0; +return opendir (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_type_uintmax_t=yes -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +for ac_lib in '' x; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_opendir=$ac_res fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_uintmax_t" >&5 -$as_echo "$ac_cv_type_uintmax_t" >&6; } -if test "x$ac_cv_type_uintmax_t" = x""yes; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_UINTMAX_T 1 -_ACEOF - - +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_opendir+:} false; then : + break fi +done +if ${ac_cv_search_opendir+:} false; then : - -for ac_header in wchar.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_search_opendir=no +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 +$as_echo "$ac_cv_search_opendir" >&6; } +ac_res=$ac_cv_search_opendir +if test "$ac_res" != no; then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - ac_header_compiler=no fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } +fi -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> + +#-------------------------------------------------------------------- +# This function needed by gdomap.c +#-------------------------------------------------------------------- +for ac_header in getopt.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "getopt.h" "ac_cv_header_getopt_h" "$ac_includes_default" +if test "x$ac_cv_header_getopt_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_GETOPT_H 1 _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_preproc=no fi -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } +done -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } +#-------------------------------------------------------------------- +# This function needed by NSPage.m +#-------------------------------------------------------------------- +for ac_func in posix_memalign valloc +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then +done + + +#-------------------------------------------------------------------- +# This function needed by Time.m +#-------------------------------------------------------------------- +for ac_func in times +do : + ac_fn_c_check_func "$LINENO" "times" "ac_cv_func_times" +if test "x$ac_cv_func_times" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define HAVE_TIMES 1 _ACEOF fi - done #-------------------------------------------------------------------- -# Check if short and int values need to be word aligned +# These functions needed by NSData.m and GSFFIInvocation.m #-------------------------------------------------------------------- -{ $as_echo "$as_me:$LINENO: checking short/int needs to be word aligned" >&5 -$as_echo_n "checking short/int needs to be word aligned... " >&6; } -if test "$cross_compiling" = yes; then - NEED_WORD_ALIGNMENT=1 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +for ac_func in mkstemp +do : + ac_fn_c_check_func "$LINENO" "mkstemp" "ac_cv_func_mkstemp" +if test "x$ac_cv_func_mkstemp" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_MKSTEMP 1 _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include "$srcdir/config/config.align.c" + +fi +done + +for ac_func in shmctl +do : + ac_fn_c_check_func "$LINENO" "shmctl" "ac_cv_func_shmctl" +if test "x$ac_cv_func_shmctl" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SHMCTL 1 _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - NEED_WORD_ALIGNMENT=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -( exit $ac_status ) -NEED_WORD_ALIGNMENT=1 fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +done + +for ac_func in mmap +do : + ac_fn_c_check_func "$LINENO" "mmap" "ac_cv_func_mmap" +if test "x$ac_cv_func_mmap" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_MMAP 1 +_ACEOF + fi +done +for ac_func in mprotect +do : + ac_fn_c_check_func "$LINENO" "mprotect" "ac_cv_func_mprotect" +if test "x$ac_cv_func_mprotect" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_MPROTECT 1 +_ACEOF +fi +done -cat >>confdefs.h <<_ACEOF -#define NEED_WORD_ALIGNMENT $NEED_WORD_ALIGNMENT +for ac_header in sys/mman.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "sys/mman.h" "ac_cv_header_sys_mman_h" "$ac_includes_default" +if test "x$ac_cv_header_sys_mman_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SYS_MMAN_H 1 _ACEOF -if test $NEED_WORD_ALIGNMENT = 1; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } fi +done + + #-------------------------------------------------------------------- -# This needed by NSString for handling of %@ printf directive. +# These functions needed by NSTask.m #-------------------------------------------------------------------- +for ac_func in killpg setpgrp setpgid setsid +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF -for ac_func in register_printf_specifier -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +fi +done + +if test "x$ac_cv_func_setpgrp" = xyes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether setpgrp takes no argument" >&5 +$as_echo_n "checking whether setpgrp takes no argument... " >&6; } +if ${ac_cv_func_setpgrp_void+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + if test "$cross_compiling" = yes; then : + as_fn_error $? "cannot check setpgrp when cross compiling" "$LINENO" 5 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - +$ac_includes_default int main () { -return $ac_func (); +/* If this system has a BSD-style setpgrp which takes arguments, + setpgrp(1, 1) will fail with ESRCH and return -1, in that case + exit successfully. */ + return setpgrp (1,1) != -1; ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_setpgrp_void=no else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" + ac_cv_func_setpgrp_void=yes +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_setpgrp_void" >&5 +$as_echo "$ac_cv_func_setpgrp_void" >&6; } +if test $ac_cv_func_setpgrp_void = yes; then + +$as_echo "#define SETPGRP_VOID 1" >>confdefs.h fi -done -{ $as_echo "$as_me:$LINENO: checking for register_printf_function" >&5 -$as_echo_n "checking for register_printf_function... " >&6; } -if test "${ac_cv_func_register_printf_function+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define register_printf_function to an innocuous variant, in case declares register_printf_function. - For example, HP-UX 11i declares gettimeofday. */ -#define register_printf_function innocuous_register_printf_function +fi -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char register_printf_function (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ +HAVE_PTS_STREAM_MODULES=0 +case "${target}" in + *-sysv-*) + HAVE_PTS_STREAM_MODULES=1 + ;; +esac -#ifdef __STDC__ -# include -#else -# include -#endif +cat >>confdefs.h <<_ACEOF +#define HAVE_PTS_STREAM_MODULES $HAVE_PTS_STREAM_MODULES +_ACEOF -#undef register_printf_function -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char register_printf_function (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_register_printf_function || defined __stub___register_printf_function -choke me -#endif -int -main () -{ -return register_printf_function (); - ; - return 0; -} +for ac_header in fcntl.h inttypes.h libc.h limits.h malloc.h memory.h signal.h stdint.h string.h sys/fcntl.h sys/file.h sys/inttypes.h sys/ioctl.h sys/signal.h sys/stropts.h sys/wait.h unistd.h utime.h stdlib.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_func_register_printf_function=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_cv_func_register_printf_function=no fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +done + + +if test $ac_cv_header_stdint_h = yes; then +INCLUDE_STDINT="#include " +elif test $ac_cv_header_inttypes_h = yes; then +INCLUDE_STDINT="#include " +elif test $ac_cv_header_sys_inttypes_h = yes; then +INCLUDE_STDINT="#include " +else +INCLUDE_STDINT="no" fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_register_printf_function" >&5 -$as_echo "$ac_cv_func_register_printf_function" >&6; } -if test "x$ac_cv_func_register_printf_function" = x""yes; then - register_printf=1 + +if test "$INCLUDE_STDINT" = "no"; then +INCLUDE_STDINT="" +DEFINE_INT8_T="#define int8_t gss8" +DEFINE_UINT8_T="#define uint8_t gsu8" +DEFINE_INT16_T="#define int16_t gss16" +DEFINE_UINT16_T="#define uint16_t gsu16" +DEFINE_INT32_T="#define int32_t gss32" +DEFINE_UINT32_T="#define uint32_t gsu32" +DEFINE_INT64_T="#define int64_t gss64" +DEFINE_UINT64_T="#define uint64_t gsu64" +DEFINE_INTPTR_T="#define intptr_t gssaddr" +DEFINE_UINTPTR_T="#define uintptr_t gsuaddr" else - register_printf=0 +DEFINE_INT8_T="" +DEFINE_UINT8_T="" +DEFINE_INT16_T="" +DEFINE_UINT16_T="" +DEFINE_INT32_T="" +DEFINE_UINT32_T="" +DEFINE_INT64_T="" +DEFINE_UINT64_T="" +DEFINE_INTPTR_T="" +DEFINE_UINTPTR_T="" fi -if test $register_printf = 1; then - if test "$cross_compiling" = yes; then - working_register_printf=1 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include "$srcdir/config/config.printf.c" -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - working_register_printf=1 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -( exit $ac_status ) -working_register_printf=0 -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - if test $working_register_printf = 1; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_REGISTER_PRINTF_FUNCTION 1 -_ACEOF - if test "$cross_compiling" = yes; then - wide_register_printf=1 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include "$srcdir/config/config.wprintf.c" -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - wide_register_printf=1 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -( exit $ac_status ) -wide_register_printf=0 -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - if test $wide_register_printf = 1; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_WIDE_PRINTF_FUNCTION 1 -_ACEOF - fi - fi -fi #-------------------------------------------------------------------- -# This function needed by NSString. +# These used by GSFileHandle.m and distributed objects +# On some systems we need -lnsl ... so check for that first. #-------------------------------------------------------------------- - -for ac_func in realpath -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing inet_ntop" >&5 +$as_echo_n "checking for library containing inet_ntop... " >&6; } +if ${ac_cv_search_inet_ntop+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC @@ -20642,62 +8635,52 @@ #ifdef __cplusplus extern "C" #endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - +char inet_ntop (); int main () { -return $ac_func (); +return inet_ntop (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +for ac_lib in '' nsl; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_inet_ntop=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_inet_ntop+:} false; then : + break +fi +done +if ${ac_cv_search_inet_ntop+:} false; then : - eval "$as_ac_var=no" +else + ac_cv_search_inet_ntop=no +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_inet_ntop" >&5 +$as_echo "$ac_cv_search_inet_ntop" >&6; } +ac_res=$ac_cv_search_inet_ntop +if test "$ac_res" != no; then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then + +for ac_func in gethostbyaddr_r inet_aton inet_pton inet_ntop sigaction +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF @@ -20705,481 +8688,275 @@ fi done +USE_ZLIB=0 +for ac_header in zlib.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default" +if test "x$ac_cv_header_zlib_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_ZLIB_H 1 +_ACEOF + +fi -#-------------------------------------------------------------------- -# Check if the C Library defines extern char *program_invocation_name -# Used in critical cases by NSProcessInfo.m -#-------------------------------------------------------------------- -{ $as_echo "$as_me:$LINENO: checking program_invocation_name in C Library" >&5 -$as_echo_n "checking program_invocation_name in C Library... " >&6; } -if test "${gs_cv_program_invocation_name_worked+set}" = set; then +done + +if test $ac_cv_header_zlib_h = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gzseek in -lz" >&5 +$as_echo_n "checking for gzseek in -lz... " >&6; } +if ${ac_cv_lib_z_gzseek+:} false; then : $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then - gs_cv_program_invocation_name_worked=no -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + ac_check_lib_save_LIBS=$LIBS +LIBS="-lz $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#include +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char gzseek (); int -main (int argc, char *argv[]) +main () { - extern char *program_invocation_name; - return (strcmp (program_invocation_name, argv[0])); +return gzseek (); + ; + return 0; } - _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - gs_cv_program_invocation_name_worked=yes +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_z_gzseek=yes else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -gs_cv_program_invocation_name_worked=no + ac_cv_lib_z_gzseek=no fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi - - +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_z_gzseek" >&5 +$as_echo "$ac_cv_lib_z_gzseek" >&6; } +if test "x$ac_cv_lib_z_gzseek" = xyes; then : + zlib_ok=yes +else + zlib_ok=no fi -if test $gs_cv_program_invocation_name_worked = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_PROGRAM_INVOCATION_NAME 1 -_ACEOF - - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } + if test "$zlib_ok" = yes; then + LIBS="$LIBS -lz" + USE_ZLIB=1 + fi fi -#-------------------------------------------------------------------- -# Check for uname header used by NSProcessInfo.m -#-------------------------------------------------------------------- -for ac_header in sys/utsname.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 +HAVE_INET_PTON=no +if test $ac_cv_func_inet_pton = yes ; then + HAVE_INET_PTON=yes fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_compiler=no + +HAVE_INET_NTOP=no +if test $ac_cv_func_inet_ntop = yes ; then + HAVE_INET_NTOP=yes fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +#-------------------------------------------------------------------- +# For setting thread stack size +#-------------------------------------------------------------------- +for ac_header in sys/resource.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "sys/resource.h" "ac_cv_header_sys_resource_h" "$ac_includes_default" +if test "x$ac_cv_header_sys_resource_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SYS_RESOURCE_H 1 +_ACEOF - ac_header_preproc=no fi -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } +done -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +for ac_func in setrlimit +do : + ac_fn_c_check_func "$LINENO" "setrlimit" "ac_cv_func_setrlimit" +if test "x$ac_cv_func_setrlimit" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SETRLIMIT 1 +_ACEOF - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } +done -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then + +#-------------------------------------------------------------------- +# One of these functions needed by NSDebug.m and NSProcessInfo.m +#-------------------------------------------------------------------- +for ac_func in strerror_r strerror +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi - done #-------------------------------------------------------------------- -# Check for sysctlbyname used by NSProcessInfo.m +# Needed by NSDebug.m #-------------------------------------------------------------------- +for ac_func in sigsetjmp +do : + ac_fn_c_check_func "$LINENO" "sigsetjmp" "ac_cv_func_sigsetjmp" +if test "x$ac_cv_func_sigsetjmp" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SIGSETJMP 1 +_ACEOF -for ac_header in sys/sysctl.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +done + + +#-------------------------------------------------------------------- +# This type needed by GSFormat +#-------------------------------------------------------------------- +ac_fn_c_check_type "$LINENO" "uintmax_t" "ac_cv_type_uintmax_t" "$ac_includes_default" +if test "x$ac_cv_type_uintmax_t" = xyes; then : + +cat >>confdefs.h <<_ACEOF +#define HAVE_UINTMAX_T 1 _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> + + +fi + +for ac_header in wchar.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "wchar.h" "ac_cv_header_wchar_h" "$ac_includes_default" +if test "x$ac_cv_header_wchar_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_WCHAR_H 1 _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_compiler=no fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } +done -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + +#-------------------------------------------------------------------- +# Check if short and int values need to be word aligned +#-------------------------------------------------------------------- +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking short/int needs to be word aligned" >&5 +$as_echo_n "checking short/int needs to be word aligned... " >&6; } +if test "$cross_compiling" = yes; then : + NEED_WORD_ALIGNMENT=1 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#include <$ac_header> +#include "$srcdir/config/config.align.c" _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes +if ac_fn_c_try_run "$LINENO"; then : + NEED_WORD_ALIGNMENT=0 else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no + NEED_WORD_ALIGNMENT=1 +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +cat >>confdefs.h <<_ACEOF +#define NEED_WORD_ALIGNMENT $NEED_WORD_ALIGNMENT +_ACEOF - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 +if test $NEED_WORD_ALIGNMENT = 1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } else - eval "$as_ac_Header=\$ac_header_preproc" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then +#-------------------------------------------------------------------- +# This needed by NSString for handling of %@ printf directive. +#-------------------------------------------------------------------- +for ac_func in register_printf_specifier +do : + ac_fn_c_check_func "$LINENO" "register_printf_specifier" "ac_cv_func_register_printf_specifier" +if test "x$ac_cv_func_register_printf_specifier" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define HAVE_REGISTER_PRINTF_SPECIFIER 1 _ACEOF fi - done +ac_fn_c_check_func "$LINENO" "register_printf_function" "ac_cv_func_register_printf_function" +if test "x$ac_cv_func_register_printf_function" = xyes; then : + register_printf=1 +else + register_printf=0 +fi -for ac_func in sysctlbyname -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 +if test $register_printf = 1; then + if test "$cross_compiling" = yes; then : + working_register_printf=1 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif +#include "$srcdir/config/config.printf.c" +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + working_register_printf=1 +else + working_register_printf=0 +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi -#undef $ac_func + if test $working_register_printf = 1; then -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif +$as_echo "#define HAVE_REGISTER_PRINTF_FUNCTION 1" >>confdefs.h -int -main () -{ -return $ac_func (); - ; - return 0; -} + if test "$cross_compiling" = yes; then : + wide_register_printf=1 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include "$srcdir/config/config.wprintf.c" _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" +if ac_fn_c_try_run "$LINENO"; then : + wide_register_printf=1 else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" + wide_register_printf=0 +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext + if test $wide_register_printf = 1; then + +$as_echo "#define HAVE_WIDE_PRINTF_FUNCTION 1" >>confdefs.h + + fi + fi fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then + + +#-------------------------------------------------------------------- +# This function needed by NSString. +#-------------------------------------------------------------------- +for ac_func in realpath +do : + ac_fn_c_check_func "$LINENO" "realpath" "ac_cv_func_realpath" +if test "x$ac_cv_func_realpath" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +#define HAVE_REALPATH 1 _ACEOF fi @@ -21187,149 +8964,104 @@ #-------------------------------------------------------------------- -# Defines HAVE_PROCFS if the kernel supports the /proc filesystem. -# Needed by NSProcessInfo.m +# Check if the C Library defines extern char *program_invocation_name +# Used in critical cases by NSProcessInfo.m #-------------------------------------------------------------------- - -for ac_header in procfs.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking program_invocation_name in C Library" >&5 +$as_echo_n "checking program_invocation_name in C Library... " >&6; } +if ${gs_cv_program_invocation_name_worked+:} false; then : $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + if test "$cross_compiling" = yes; then : + gs_cv_program_invocation_name_worked=no +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> + +#include +int +main (int argc, char *argv[]) +{ + extern char *program_invocation_name; + return (strcmp (program_invocation_name, argv[0])); +} + _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes +if ac_fn_c_try_run "$LINENO"; then : + gs_cv_program_invocation_name_worked=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + gs_cv_program_invocation_name_worked=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi - ac_header_compiler=no fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } +if test $gs_cv_program_invocation_name_worked = yes; then -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes +$as_echo "#define HAVE_PROGRAM_INVOCATION_NAME 1" >>confdefs.h + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + +#-------------------------------------------------------------------- +# Check for uname header used by NSProcessInfo.m +#-------------------------------------------------------------------- +for ac_header in sys/utsname.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "sys/utsname.h" "ac_cv_header_sys_utsname_h" "$ac_includes_default" +if test "x$ac_cv_header_sys_utsname_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SYS_UTSNAME_H 1 +_ACEOF - ac_header_preproc=no fi -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } +done -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" +#-------------------------------------------------------------------- +# Check for sysctlbyname used by NSProcessInfo.m +#-------------------------------------------------------------------- +for ac_header in sys/sysctl.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "sys/sysctl.h" "ac_cv_header_sys_sysctl_h" "$ac_includes_default" +if test "x$ac_cv_header_sys_sysctl_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SYS_SYSCTL_H 1 +_ACEOF + fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } + +done + +for ac_func in sysctlbyname +do : + ac_fn_c_check_func "$LINENO" "sysctlbyname" "ac_cv_func_sysctlbyname" +if test "x$ac_cv_func_sysctlbyname" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SYSCTLBYNAME 1 +_ACEOF fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then +done + + +#-------------------------------------------------------------------- +# Defines HAVE_PROCFS if the kernel supports the /proc filesystem. +# Needed by NSProcessInfo.m +#-------------------------------------------------------------------- +for ac_header in procfs.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "procfs.h" "ac_cv_header_procfs_h" "$ac_includes_default" +if test "x$ac_cv_header_procfs_h" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define HAVE_PROCFS_H 1 _ACEOF fi @@ -21337,16 +9069,16 @@ done # Check whether --enable-procfs was given. -if test "${enable_procfs+set}" = set; then +if test "${enable_procfs+set}" = set; then : enableval=$enable_procfs; enable_procfs="$enableval" else if test "$cross_compiling" = yes; then enable_procfs=cross; else enable_procfs=yes; fi; fi - { $as_echo "$as_me:$LINENO: checking kernel support for /proc filesystem" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking kernel support for /proc filesystem" >&5 $as_echo_n "checking kernel support for /proc filesystem... " >&6; } -if test "${ac_cv_sys_procfs+set}" = set; then +if ${ac_cv_sys_procfs+:} false; then : $as_echo_n "(cached) " >&6 else if test "$enable_procfs" = yes; then @@ -21372,110 +9104,75 @@ ac_cv_sys_procfs=no fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_sys_procfs" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_procfs" >&5 $as_echo "$ac_cv_sys_procfs" >&6; } if test "$enable_procfs" = cross; then - { $as_echo "$as_me:$LINENO: WARNING: Cross-compiling: Pass --enable-procfs argument to enable use of /proc filesystem." >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Cross-compiling: Pass --enable-procfs argument to enable use of /proc filesystem." >&5 $as_echo "$as_me: WARNING: Cross-compiling: Pass --enable-procfs argument to enable use of /proc filesystem." >&2;} fi if test $ac_cv_sys_procfs = yes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_PROCFS 1 -_ACEOF +$as_echo "#define HAVE_PROCFS 1" >>confdefs.h fi # Check whether --enable-procfs-psinfo was given. -if test "${enable_procfs_psinfo+set}" = set; then +if test "${enable_procfs_psinfo+set}" = set; then : enableval=$enable_procfs_psinfo; enable_procfs_psinfo="$enableval" else if test "$cross_compiling" = yes; then enable_procfs_psinfo=cross; else enable_procfs_psinfo=yes; fi; fi - { $as_echo "$as_me:$LINENO: checking support for /proc psinfo struct" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking support for /proc psinfo struct" >&5 $as_echo_n "checking support for /proc psinfo struct... " >&6; } -if test "${ac_cv_sys_procfs_psinfo+set}" = set; then +if ${ac_cv_sys_procfs_psinfo+:} false; then : $as_echo_n "(cached) " >&6 else if test "$enable_procfs_psinfo" = yes; then - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : ac_cv_sys_procfs_psinfo=yes else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include "$srcdir/config/config.psinfo.c" _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_run "$LINENO"; then : ac_cv_sys_procfs_psinfo=yes else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_sys_procfs_psinfo=no + ac_cv_sys_procfs_psinfo=no fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - elif test "$enable_procfs" = cross; then ac_cv_sys_procfs_psinfo=no else ac_cv_sys_procfs_psinfo=no fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_sys_procfs_psinfo" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_procfs_psinfo" >&5 $as_echo "$ac_cv_sys_procfs_psinfo" >&6; } if test "$enable_procfs" = cross; then - { $as_echo "$as_me:$LINENO: WARNING: Cross-compiling: Pass --enable-procfs-psinfo argument to enable use of /proc psinfo information." >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Cross-compiling: Pass --enable-procfs-psinfo argument to enable use of /proc psinfo information." >&5 $as_echo "$as_me: WARNING: Cross-compiling: Pass --enable-procfs-psinfo argument to enable use of /proc psinfo information." >&2;} fi if test $ac_cv_sys_procfs_psinfo = yes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_PROCFS_PSINFO 1 -_ACEOF +$as_echo "#define HAVE_PROCFS_PSINFO 1" >>confdefs.h fi - { $as_echo "$as_me:$LINENO: checking link to exe of process in /proc" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking link to exe of process in /proc" >&5 $as_echo_n "checking link to exe of process in /proc... " >&6; } -if test "${ac_cv_sys_procfs_exe_link+set}" = set; then +if ${ac_cv_sys_procfs_exe_link+:} false; then : $as_echo_n "(cached) " >&6 else if test "$ac_cv_sys_procfs" = yes; then @@ -21492,7 +9189,7 @@ ac_cv_sys_procfs_exe_link=no fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_sys_procfs_exe_link" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_procfs_exe_link" >&5 $as_echo "$ac_cv_sys_procfs_exe_link" >&6; } if test "$ac_cv_sys_procfs_exe_link" != no; then @@ -21507,65 +9204,34 @@ #-------------------------------------------------------------------- # Check if /proc/$$/cmdline terminates the last argument with a nul #-------------------------------------------------------------------- -{ $as_echo "$as_me:$LINENO: checking /proc/$$/cmdline terminated by nul" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking /proc/$$/cmdline terminated by nul" >&5 $as_echo_n "checking /proc/$$/cmdline terminated by nul... " >&6; } -if test "$cross_compiling" = yes; then +if test "$cross_compiling" = yes; then : CMDLINE_TERMINATED=0 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include "$srcdir/config/config.proccmd.c" _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_run "$LINENO"; then : CMDLINE_TERMINATED=1 else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -CMDLINE_TERMINATED=0 + CMDLINE_TERMINATED=0 fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - cat >>confdefs.h <<_ACEOF #define CMDLINE_TERMINATED $CMDLINE_TERMINATED _ACEOF if test $CMDLINE_TERMINATED = 1; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -21574,19 +9240,14 @@ #-------------------------------------------------------------------- have_kvm_env=0 save_LIBS="$LIBS" - -{ $as_echo "$as_me:$LINENO: checking for kvm_getenvv in -lkvm" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for kvm_getenvv in -lkvm" >&5 $as_echo_n "checking for kvm_getenvv in -lkvm... " >&6; } -if test "${ac_cv_lib_kvm_kvm_getenvv+set}" = set; then +if ${ac_cv_lib_kvm_kvm_getenvv+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lkvm $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -21604,43 +9265,18 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_kvm_kvm_getenvv=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_kvm_kvm_getenvv=no + ac_cv_lib_kvm_kvm_getenvv=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_kvm_kvm_getenvv" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_kvm_kvm_getenvv" >&5 $as_echo "$ac_cv_lib_kvm_kvm_getenvv" >&6; } -if test "x$ac_cv_lib_kvm_kvm_getenvv" = x""yes; then +if test "x$ac_cv_lib_kvm_kvm_getenvv" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LIBKVM 1 _ACEOF @@ -21650,65 +9286,32 @@ fi if test "$ac_cv_lib_kvm_kvm_getenvv" = yes; then - { $as_echo "$as_me:$LINENO: checking if we can access kernel memory" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can access kernel memory" >&5 $as_echo_n "checking if we can access kernel memory... " >&6; } - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : have_kvm_env=0 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include "$srcdir/config/config.kvmopen.c" _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_run "$LINENO"; then : have_kvm_env=1 else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -have_kvm_env=0 + have_kvm_env=0 fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - if test $have_kvm_env = 1; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } -cat >>confdefs.h <<\_ACEOF -#define HAVE_KVM_ENV 1 -_ACEOF +$as_echo "#define HAVE_KVM_ENV 1" >>confdefs.h else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } # Reset LIBS since we don't need kvm LIBS="$save_LIBS" @@ -21725,10 +9328,10 @@ cygwin*) PASS_ARG=yes;; esac -{ $as_echo "$as_me:$LINENO: checking use of pass-through arguments" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking use of pass-through arguments" >&5 $as_echo_n "checking use of pass-through arguments... " >&6; } # Check whether --enable-pass-arguments was given. -if test "${enable_pass_arguments+set}" = set; then +if test "${enable_pass_arguments+set}" = set; then : enableval=$enable_pass_arguments; else enable_pass_arguments=$PASS_ARG @@ -21741,13 +9344,13 @@ GS_PASS_ARGUMENTS=0 fi -{ $as_echo "$as_me:$LINENO: result: $enable_pass_arguments" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_pass_arguments" >&5 $as_echo "$enable_pass_arguments" >&6; } -{ $as_echo "$as_me:$LINENO: checking use of fake-main definition" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking use of fake-main definition" >&5 $as_echo_n "checking use of fake-main definition... " >&6; } # Check whether --enable-fake-main was given. -if test "${enable_fake_main+set}" = set; then +if test "${enable_fake_main+set}" = set; then : enableval=$enable_fake_main; else enable_fake_main=no @@ -21758,6 +9361,7 @@ case "$target_os" in freebsd2*) enable_fake_main=yes;; freebsd*) ;; + kfreebsd*) enable_fake_main=yes;; netbsd*) enable_fake_main=yes;; openbsd*) enable_fake_main=yes;; *sysv*) enable_fake_main=yes;; @@ -21771,7 +9375,7 @@ if test "$gs_cv_objc_load_method_worked" = yes -a \( "$ac_cv_sys_procfs" = yes -o "$have_kvm_env" = 1 -o "$ac_cv_sys_procfs_psinfo" = yes \); then GS_FAKE_MAIN=0 if test "$have_kvm_env" = "1"; then - { $as_echo "$as_me:$LINENO: WARNING: Using libkvm which is known to be buggy on some systems consider configuring with --enable-fake-main instead." >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Using libkvm which is known to be buggy on some systems consider configuring with --enable-fake-main instead." >&5 $as_echo "$as_me: WARNING: Using libkvm which is known to be buggy on some systems consider configuring with --enable-fake-main instead." >&2;} fi else @@ -21787,7 +9391,7 @@ mingw*) enable_fake_main=no; GS_FAKE_MAIN=0;; esac -{ $as_echo "$as_me:$LINENO: result: $enable_fake_main" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_fake_main" >&5 $as_echo "$enable_fake_main" >&6; } #-------------------------------------------------------------------- @@ -21795,7 +9399,7 @@ #-------------------------------------------------------------------- # Check whether --with-include-flags was given. -if test "${with_include_flags+set}" = set; then +if test "${with_include_flags+set}" = set; then : withval=$with_include_flags; include_flags="$withval" else include_flags="no" @@ -21808,7 +9412,7 @@ # Check whether --with-library-flags was given. -if test "${with_library_flags+set}" = set; then +if test "${with_library_flags+set}" = set; then : withval=$with_library_flags; library_flags="$withval" else library_flags="no" @@ -21858,7 +9462,7 @@ fi # Check whether --enable-libffi was given. -if test "${enable_libffi+set}" = set; then +if test "${enable_libffi+set}" = set; then : enableval=$enable_libffi; else enable_libffi=$do_enable_libffi @@ -21866,7 +9470,7 @@ # Check whether --enable-ffcall was given. -if test "${enable_ffcall+set}" = set; then +if test "${enable_ffcall+set}" = set; then : enableval=$enable_ffcall; else enable_ffcall=$do_enable_libffcall @@ -21874,12 +9478,12 @@ if test $enable_ffcall = yes; then - { $as_echo "$as_me:$LINENO: WARNING: ffcall has been enabled ... this is deprecated ... please install and use a recent libffi if possible" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ffcall has been enabled ... this is deprecated ... please install and use a recent libffi if possible" >&5 $as_echo "$as_me: WARNING: ffcall has been enabled ... this is deprecated ... please install and use a recent libffi if possible" >&2;} fi # Check whether --enable-invocations was given. -if test "${enable_invocations+set}" = set; then +if test "${enable_invocations+set}" = set; then : enableval=$enable_invocations; else enable_invocations=yes @@ -21893,7 +9497,7 @@ # Check whether --with-ffi-include was given. -if test "${with_ffi_include+set}" = set; then +if test "${with_ffi_include+set}" = set; then : withval=$with_ffi_include; ffi_incdir="$withval" else ffi_incdir="no" @@ -21906,7 +9510,7 @@ # Check whether --with-ffi-library was given. -if test "${with_ffi_library+set}" = set; then +if test "${with_ffi_library+set}" = set; then : withval=$with_ffi_library; ffi_libdir="$withval" else ffi_libdir="no" @@ -21934,134 +9538,8 @@ INCLUDE_FLAGS="$INCLUDE_FLAGS $ffi_CFLAGS" fi fi - if test "${ac_cv_header_ffi_h+set}" = set; then - { $as_echo "$as_me:$LINENO: checking for ffi.h" >&5 -$as_echo_n "checking for ffi.h... " >&6; } -if test "${ac_cv_header_ffi_h+set}" = set; then - $as_echo_n "(cached) " >&6 -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_ffi_h" >&5 -$as_echo "$ac_cv_header_ffi_h" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking ffi.h usability" >&5 -$as_echo_n "checking ffi.h usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking ffi.h presence" >&5 -$as_echo_n "checking ffi.h presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: ffi.h: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: ffi.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: ffi.h: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: ffi.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: ffi.h: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: ffi.h: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: ffi.h: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: ffi.h: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: ffi.h: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: ffi.h: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: ffi.h: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: ffi.h: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: ffi.h: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: ffi.h: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: ffi.h: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: ffi.h: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for ffi.h" >&5 -$as_echo_n "checking for ffi.h... " >&6; } -if test "${ac_cv_header_ffi_h+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_header_ffi_h=$ac_header_preproc -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_ffi_h" >&5 -$as_echo "$ac_cv_header_ffi_h" >&6; } - -fi -if test "x$ac_cv_header_ffi_h" = x""yes; then + ac_fn_c_check_header_mongrel "$LINENO" "ffi.h" "ac_cv_header_ffi_h" "$ac_includes_default" +if test "x$ac_cv_header_ffi_h" = xyes; then : have_libffi=yes else have_libffi=no @@ -22072,146 +9550,12 @@ have_libffi=no fi if test "$do_broken_libffcall" = "no"; then - -for ac_header in callback.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then + for ac_header in callback.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "callback.h" "ac_cv_header_callback_h" "$ac_includes_default" +if test "x$ac_cv_header_callback_h" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define HAVE_CALLBACK_H 1 _ACEOF have_ffcall=yes else @@ -22235,7 +9579,7 @@ # If we don't have libffi but do have ffcall, use ffcall if test $have_ffcall = yes; then if test $enable_ffcall = no; then - { $as_echo "$as_me:$LINENO: WARNING: ffi support seems to be missing on this system ... please install a recent libffi" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ffi support seems to be missing on this system ... please install a recent libffi" >&5 $as_echo "$as_me: WARNING: ffi support seems to be missing on this system ... please install a recent libffi" >&2;} fi fi @@ -22244,77 +9588,35 @@ have_forward_hook=yes saved_CPPFLAGS="$CPPFLAGS" CPPFLAGS="$CPPFLAGS $OBJCFLAGS -x objective-c" -{ $as_echo "$as_me:$LINENO: checking for forwarding callback in runtime" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for forwarding callback in runtime" >&5 $as_echo_n "checking for forwarding callback in runtime... " >&6; } -cat >conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ #include "$srcdir/config/config.forward2.m" _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : have_forward_hook=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - have_forward_hook=no + have_forward_hook=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $have_forward_hook = yes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_FORWARD2 1 -_ACEOF +$as_echo "#define HAVE_FORWARD2 1" >>confdefs.h else - cat >conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ #include "$srcdir/config/config.forward.m" _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : have_forward_hook=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - have_forward_hook=no + have_forward_hook=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $have_forward_hook" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_forward_hook" >&5 $as_echo "$have_forward_hook" >&6; } if test $have_forward_hook = no; then enable_libffi=no @@ -22322,14 +9624,12 @@ fi CPPFLAGS="$saved_CPPFLAGS" -{ $as_echo "$as_me:$LINENO: checking FFI library usage" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking FFI library usage" >&5 $as_echo_n "checking FFI library usage... " >&6; } WITH_FFI=none if test $enable_libffi = yes; then -cat >>confdefs.h <<\_ACEOF -#define USE_LIBFFI 1 -_ACEOF +$as_echo "#define USE_LIBFFI 1" >>confdefs.h WITH_FFI=libffi if test "$pkg_config_libffi" = "yes"; then @@ -22338,179 +9638,50 @@ ffi_LIBS=-lffi fi LIBS="$ffi_LIBS $LIBS" - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : ffi_ok="yes" else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include "$srcdir/config/config.ffi.c" _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_run "$LINENO"; then : ffi_ok="yes" else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ffi_ok="no" + ffi_ok="no" fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - if test $ffi_ok = yes; then - { $as_echo "$as_me:$LINENO: result: libffi" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: libffi" >&5 $as_echo "libffi" >&6; } if test $do_broken_libffi = yes; then - { $as_echo "$as_me:$LINENO: WARNING: ffi may be broken on this system ... try enabling ffcall" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ffi may be broken on this system ... try enabling ffcall" >&5 $as_echo "$as_me: WARNING: ffi may be broken on this system ... try enabling ffcall" >&2;} fi - -for ac_func in ffi_prep_closure_loc -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then + for ac_func in ffi_prep_closure_loc +do : + ac_fn_c_check_func "$LINENO" "ffi_prep_closure_loc" "ac_cv_func_ffi_prep_closure_loc" +if test "x$ac_cv_func_ffi_prep_closure_loc" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +#define HAVE_FFI_PREP_CLOSURE_LOC 1 _ACEOF fi done else - { { $as_echo "$as_me:$LINENO: error: The ffi library (libffi) does not appear to be working. Perhaps it's missing or you need a more recent version. Version 3.0.9 or later should work, and you can find a link to it n the list of packages for download at http://www.gnustep.org/resources/sources.html" >&5 -$as_echo "$as_me: error: The ffi library (libffi) does not appear to be working. Perhaps it's missing or you need a more recent version. Version 3.0.9 or later should work, and you can find a link to it n the list of packages for download at http://www.gnustep.org/resources/sources.html" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "The ffi library (libffi) does not appear to be working. Perhaps it's missing or you need a more recent version. Version 3.0.9 or later should work, and you can find a link to it n the list of packages for download at http://www.gnustep.org/resources/sources.html" "$LINENO" 5 fi elif test $enable_ffcall = yes; then -cat >>confdefs.h <<\_ACEOF -#define USE_FFCALL 1 -_ACEOF +$as_echo "#define USE_FFCALL 1" >>confdefs.h WITH_FFI=ffcall LIBS="-lcallback -lavcall $LIBS" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int @@ -22521,99 +9692,48 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : ffi_ok="yes" else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ffi_ok="no" + ffi_ok="no" fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext if test $ffi_ok = yes; then - { $as_echo "$as_me:$LINENO: result: ffcall" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ffcall" >&5 $as_echo "ffcall" >&6; } fi - { $as_echo "$as_me:$LINENO: WARNING: ffcall is broken on some systems and is deprecated ... try enabling ffi" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ffcall is broken on some systems and is deprecated ... try enabling ffi" >&5 $as_echo "$as_me: WARNING: ffcall is broken on some systems and is deprecated ... try enabling ffi" >&2;} else ffi_ok=no fi if test $enable_ffcall = yes -a $ffi_ok = yes; then - { $as_echo "$as_me:$LINENO: checking if ffcall trampolines work" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if ffcall trampolines work" >&5 $as_echo_n "checking if ffcall trampolines work... " >&6; } - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : have_working_trampoline=yes else - cat >conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ #include "$srcdir/config/config.trampoline.c" _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_run "$LINENO"; then : have_working_trampoline=yes else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -have_working_trampoline=no + have_working_trampoline=no fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - - { $as_echo "$as_me:$LINENO: result: $have_working_trampoline" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_working_trampoline" >&5 $as_echo "$have_working_trampoline" >&6; } fi if test $ffi_ok = no; then - { $as_echo "$as_me:$LINENO: result: none" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 $as_echo "none" >&6; } echo if test $have_forward_hook = no; then @@ -22641,11 +9761,9 @@ echo "add --disable-invocations to the configure arguments." echo "For more information, read the GNUstep build guide, ffcall section:" echo "http://gnustep.made-it.com/BuildGuide/index.html" - { { $as_echo "$as_me:$LINENO: error: Incomplete support for ffi functionality." >&5 -$as_echo "$as_me: error: Incomplete support for ffi functionality." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "Incomplete support for ffi functionality." "$LINENO" 5 fi - { $as_echo "$as_me:$LINENO: WARNING: Incomplete support for ffi funtionality." >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Incomplete support for ffi funtionality." >&5 $as_echo "$as_me: WARNING: Incomplete support for ffi funtionality." >&2;} fi @@ -22665,62 +9783,36 @@ # # First, check if there's a working iconv in libc (ie. if the test program # compiles and links without any extra flags). -{ $as_echo "$as_me:$LINENO: checking iconv support" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking iconv support" >&5 $as_echo_n "checking iconv support... " >&6; } -cat >conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ #include int main(int argc,char **argv) { iconv_open("foo","bar"); } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : # libc has a working iconv. -cat >>confdefs.h <<\_ACEOF -#define HAVE_ICONV 1 -_ACEOF +$as_echo "#define HAVE_ICONV 1" >>confdefs.h - { $as_echo "$as_me:$LINENO: result: yes, in libc" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, in libc" >&5 $as_echo "yes, in libc" >&6; } found_iconv=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - found_iconv=no + found_iconv=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext if test $found_iconv = no ; then # libc doesn't have a working iconv. Try adding -liconv and any user # supplied directory. # Check whether --with-libiconv-library was given. -if test "${with_libiconv_library+set}" = set; then +if test "${with_libiconv_library+set}" = set; then : withval=$with_libiconv_library; libiconv_libdir="$withval" else libiconv_libdir="no" @@ -22742,54 +9834,28 @@ old_LIBS="$LIBS" LIBS="-liconv $LIBS" - cat >conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ #include int main(int argc,char **argv) { iconv_open("foo","bar"); } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : # -liconv works. -cat >>confdefs.h <<\_ACEOF -#define HAVE_ICONV 1 -_ACEOF +$as_echo "#define HAVE_ICONV 1" >>confdefs.h - { $as_echo "$as_me:$LINENO: result: yes, -liconv" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, -liconv" >&5 $as_echo "yes, -liconv" >&6; } found_iconv=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - found_iconv=no + found_iconv=no LIBS="$old_LIBS" fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext fi if test $found_iconv = no ; then @@ -22797,58 +9863,30 @@ # BSDs install this lib as libgiconv. old_LIBS="$LIBS" LIBS="-lgiconv $LIBS" - cat >conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ #include int main(int argc,char **argv) { iconv_open("foo","bar"); } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : -cat >>confdefs.h <<\_ACEOF -#define HAVE_ICONV 1 -_ACEOF +$as_echo "#define HAVE_ICONV 1" >>confdefs.h -cat >>confdefs.h <<\_ACEOF -#define HAVE_GICONV 1 -_ACEOF +$as_echo "#define HAVE_GICONV 1" >>confdefs.h - { $as_echo "$as_me:$LINENO: result: yes, -lgiconv" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, -lgiconv" >&5 $as_echo "yes, -lgiconv" >&6; } else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } LIBS="$old_LIBS" fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext fi #-------------------------------------------------------------------- @@ -22856,7 +9894,7 @@ # See DEPENDENCIES POLICY at the start of thsi file. #-------------------------------------------------------------------- # Check whether --enable-xml was given. -if test "${enable_xml+set}" = set; then +if test "${enable_xml+set}" = set; then : enableval=$enable_xml; else enable_xml=yes @@ -22872,14 +9910,14 @@ # Check whether --with-xml-prefix was given. -if test "${with_xml_prefix+set}" = set; then +if test "${with_xml_prefix+set}" = set; then : withval=$with_xml_prefix; xml_config_prefix="$withval" else xml_config_prefix="" fi # Check whether --enable-xmltest was given. -if test "${enable_xmltest+set}" = set; then +if test "${enable_xmltest+set}" = set; then : enableval=$enable_xmltest; else enable_xmltest=yes @@ -22898,9 +9936,9 @@ # Extract the first word of "xml2-config", so it can be a program name with args. set dummy xml2-config; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_XML2_CONFIG+set}" = set; then +if ${ac_cv_path_XML2_CONFIG+:} false; then : $as_echo_n "(cached) " >&6 else case $XML2_CONFIG in @@ -22913,14 +9951,14 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_XML2_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS test -z "$ac_cv_path_XML2_CONFIG" && ac_cv_path_XML2_CONFIG="no" @@ -22929,10 +9967,10 @@ fi XML2_CONFIG=$ac_cv_path_XML2_CONFIG if test -n "$XML2_CONFIG"; then - { $as_echo "$as_me:$LINENO: result: $XML2_CONFIG" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XML2_CONFIG" >&5 $as_echo "$XML2_CONFIG" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -22940,9 +9978,9 @@ if test "$XML2_CONFIG" = "no" ; then # Extract the first word of "xml-config", so it can be a program name with args. set dummy xml-config; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_XML_CONFIG+set}" = set; then +if ${ac_cv_path_XML_CONFIG+:} false; then : $as_echo_n "(cached) " >&6 else case $XML_CONFIG in @@ -22955,14 +9993,14 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_XML_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS test -z "$ac_cv_path_XML_CONFIG" && ac_cv_path_XML_CONFIG="no" @@ -22971,10 +10009,10 @@ fi XML_CONFIG=$ac_cv_path_XML_CONFIG if test -n "$XML_CONFIG"; then - { $as_echo "$as_me:$LINENO: result: $XML_CONFIG" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XML_CONFIG" >&5 $as_echo "$XML_CONFIG" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -22983,7 +10021,7 @@ XML_CONFIG=$XML2_CONFIG fi min_xml_version=2.3.0 - { $as_echo "$as_me:$LINENO: checking for libxml - version >= $min_xml_version" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libxml - version >= $min_xml_version" >&5 $as_echo_n "checking for libxml - version >= $min_xml_version... " >&6; } no_xml="" if test "$XML_CONFIG" = "no" ; then @@ -22995,14 +10033,10 @@ CFLAGS="$CFLAGS $XML_CFLAGS" LIBS="$XML_LIBS $LIBS" rm -f conf.xmltest - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : echo $ac_n "cross compiling; assumed OK... $ac_c" else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include @@ -23058,43 +10092,16 @@ } _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_run "$LINENO"; then : -( exit $ac_status ) -no_xml=yes +else + no_xml=yes fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" else @@ -23113,14 +10120,10 @@ CFLAGS="$CFLAGS $XML_CFLAGS" LIBS="$XML_LIBS $LIBS" rm -f conf.xmltest - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : echo $ac_n "cross compiling; assumed OK... $ac_c" else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include @@ -23195,54 +10198,27 @@ } _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_run "$LINENO"; then : -( exit $ac_status ) -no_xml=yes +else + no_xml=yes fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_xml" = x ; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } enable_libxml=yes else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if test "$XML_CONFIG" = "no" ; then echo "*** The xml-config script installed by libxml could not be found" @@ -23270,153 +10246,17 @@ if test $enable_libxml = yes; then CPPFLAGS="$CPPFLAGS $XML_CFLAGS" INCLUDE_FLAGS="$INCLUDE_FLAGS $XML_CFLAGS" - LIBS="$XML_LIBS $LIBS" - HAVE_LIBXML=1 - -cat >>confdefs.h <<\_ACEOF -#define HAVE_LIBXML 1 -_ACEOF - - -for ac_header in libxml/SAX2.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + LIBS="$XML_LIBS $LIBS" + HAVE_LIBXML=1 - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } +$as_echo "#define HAVE_LIBXML 1" >>confdefs.h -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then + for ac_header in libxml/SAX2.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "libxml/SAX2.h" "ac_cv_header_libxml_SAX2_h" "$ac_includes_default" +if test "x$ac_cv_header_libxml_SAX2_h" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define HAVE_LIBXML_SAX2_H 1 _ACEOF fi @@ -23427,7 +10267,7 @@ # Check for (optional) libxslt #-------------------------------------------------------------------- # Check whether --enable-xslt was given. -if test "${enable_xslt+set}" = set; then +if test "${enable_xslt+set}" = set; then : enableval=$enable_xslt; else enable_xslt=yes @@ -23435,18 +10275,14 @@ if test $enable_xslt = yes; then - { $as_echo "$as_me:$LINENO: checking for xsltApplyStylesheet in -lxslt" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for xsltApplyStylesheet in -lxslt" >&5 $as_echo_n "checking for xsltApplyStylesheet in -lxslt... " >&6; } -if test "${ac_cv_lib_xslt_xsltApplyStylesheet+set}" = set; then +if ${ac_cv_lib_xslt_xsltApplyStylesheet+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lxslt $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -23464,177 +10300,26 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_xslt_xsltApplyStylesheet=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_xslt_xsltApplyStylesheet=no + ac_cv_lib_xslt_xsltApplyStylesheet=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_xslt_xsltApplyStylesheet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_xslt_xsltApplyStylesheet" >&5 $as_echo "$ac_cv_lib_xslt_xsltApplyStylesheet" >&6; } -if test "x$ac_cv_lib_xslt_xsltApplyStylesheet" = x""yes; then +if test "x$ac_cv_lib_xslt_xsltApplyStylesheet" = xyes; then : xslt_ok=yes else xslt_ok=no fi if test "$xslt_ok" = "yes"; then - if test "${ac_cv_header_libxslt_xslt_h+set}" = set; then - { $as_echo "$as_me:$LINENO: checking for libxslt/xslt.h" >&5 -$as_echo_n "checking for libxslt/xslt.h... " >&6; } -if test "${ac_cv_header_libxslt_xslt_h+set}" = set; then - $as_echo_n "(cached) " >&6 -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_libxslt_xslt_h" >&5 -$as_echo "$ac_cv_header_libxslt_xslt_h" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking libxslt/xslt.h usability" >&5 -$as_echo_n "checking libxslt/xslt.h usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking libxslt/xslt.h presence" >&5 -$as_echo_n "checking libxslt/xslt.h presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: libxslt/xslt.h: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: libxslt/xslt.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: libxslt/xslt.h: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: libxslt/xslt.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: libxslt/xslt.h: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: libxslt/xslt.h: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: libxslt/xslt.h: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: libxslt/xslt.h: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: libxslt/xslt.h: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: libxslt/xslt.h: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: libxslt/xslt.h: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: libxslt/xslt.h: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: libxslt/xslt.h: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: libxslt/xslt.h: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: libxslt/xslt.h: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: libxslt/xslt.h: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for libxslt/xslt.h" >&5 -$as_echo_n "checking for libxslt/xslt.h... " >&6; } -if test "${ac_cv_header_libxslt_xslt_h+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_header_libxslt_xslt_h=$ac_header_preproc -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_libxslt_xslt_h" >&5 -$as_echo "$ac_cv_header_libxslt_xslt_h" >&6; } - -fi -if test "x$ac_cv_header_libxslt_xslt_h" = x""yes; then + ac_fn_c_check_header_mongrel "$LINENO" "libxslt/xslt.h" "ac_cv_header_libxslt_xslt_h" "$ac_includes_default" +if test "x$ac_cv_header_libxslt_xslt_h" = xyes; then : xslthdr_ok=yes else xslthdr_ok=no @@ -23648,9 +10333,7 @@ if test "$xslt_ok" = "yes"; then HAVE_LIBXSLT=1 -cat >>confdefs.h <<\_ACEOF -#define HAVE_LIBXSLT 1 -_ACEOF +$as_echo "#define HAVE_LIBXSLT 1" >>confdefs.h LIBS="-lxslt $LIBS" else @@ -23659,12 +10342,12 @@ echo "Doing so will disable the XSLT extensions." echo "If you really want to build -base without XSLT support," echo "add --disable-xslt to the configure arguments." - { $as_echo "$as_me:$LINENO: WARNING: Missing support for XSLT functionality." >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Missing support for XSLT functionality." >&5 $as_echo "$as_me: WARNING: Missing support for XSLT functionality." >&2;} fi else HAVE_LIBXSLT=0 - { $as_echo "$as_me:$LINENO: WARNING: Disabled support for XSLT funtionality." >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Disabled support for XSLT funtionality." >&5 $as_echo "$as_me: WARNING: Disabled support for XSLT funtionality." >&2;} fi @@ -23678,12 +10361,10 @@ echo "Doing so will disable the XML, XPATH, and XMLRPC extensions." echo "If you really want to build -base without XML support," echo "add --disable-xml to the configure arguments." - { { $as_echo "$as_me:$LINENO: error: Missing support for XML functionality." >&5 -$as_echo "$as_me: error: Missing support for XML functionality." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "Missing support for XML functionality." "$LINENO" 5 fi else - { $as_echo "$as_me:$LINENO: WARNING: Disabled support for XML funtionality." >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Disabled support for XML funtionality." >&5 $as_echo "$as_me: WARNING: Disabled support for XML funtionality." >&2;} HAVE_LIBXML=0 fi @@ -23694,7 +10375,7 @@ # See DEPENDENCIES POLICY at the start of this file. #-------------------------------------------------------------------- # Check whether --enable-tls was given. -if test "${enable_tls+set}" = set; then +if test "${enable_tls+set}" = set; then : enableval=$enable_tls; else enable_tls=yes @@ -23710,7 +10391,7 @@ if test $PKGCONFIG = yes; then if pkg-config --exists gnutls; then - { $as_echo "$as_me:$LINENO: checking gnutls support" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking gnutls support" >&5 $as_echo_n "checking gnutls support... " >&6; } HAVE_GNUTLS=1 TLS_CFLAGS=`pkg-config --cflags gnutls` @@ -23723,14 +10404,14 @@ # Check whether --with-tls-prefix was given. -if test "${with_tls_prefix+set}" = set; then +if test "${with_tls_prefix+set}" = set; then : withval=$with_tls_prefix; tls_config_prefix="$withval" else tls_config_prefix="" fi # Check whether --enable-tlstest was given. -if test "${enable_tlstest+set}" = set; then +if test "${enable_tlstest+set}" = set; then : enableval=$enable_tlstest; else enable_tlstest=yes @@ -23746,9 +10427,9 @@ # Extract the first word of "libgnutls-config", so it can be a program name with args. set dummy libgnutls-config; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_TLS_CONFIG+set}" = set; then +if ${ac_cv_path_TLS_CONFIG+:} false; then : $as_echo_n "(cached) " >&6 else case $TLS_CONFIG in @@ -23761,14 +10442,14 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_TLS_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS test -z "$ac_cv_path_TLS_CONFIG" && ac_cv_path_TLS_CONFIG="no" @@ -23777,16 +10458,16 @@ fi TLS_CONFIG=$ac_cv_path_TLS_CONFIG if test -n "$TLS_CONFIG"; then - { $as_echo "$as_me:$LINENO: result: $TLS_CONFIG" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TLS_CONFIG" >&5 $as_echo "$TLS_CONFIG" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi min_tls_version=1.4.0 - { $as_echo "$as_me:$LINENO: checking for libgnutls - version >= $min_tls_version" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libgnutls - version >= $min_tls_version" >&5 $as_echo_n "checking for libgnutls - version >= $min_tls_version... " >&6; } no_tls="" if test "$TLS_CONFIG" = "no" ; then @@ -23798,14 +10479,10 @@ CFLAGS="$CFLAGS $TLS_CFLAGS" LIBS="$TLS_LIBS $LIBS" rm -f conf.tlstest - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : echo $ac_n "cross compiling; assumed OK... $ac_c" else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include @@ -23832,43 +10509,16 @@ } _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_run "$LINENO"; then : -( exit $ac_status ) -no_tls=yes +else + no_tls=yes fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" else @@ -23887,14 +10537,10 @@ CFLAGS="$CFLAGS $TLS_CFLAGS" LIBS="$TLS_LIBS $LIBS" rm -f conf.tlstest - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : echo $ac_n "cross compiling; assumed OK... $ac_c" else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include @@ -23921,54 +10567,27 @@ } _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_run "$LINENO"; then : -( exit $ac_status ) -no_tls=yes +else + no_tls=yes fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_tls" = x ; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } enable_libgnutls=yes else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if test "$TLS_CONFIG" = "no" ; then echo "*** The libgnutls-config script installed by libgnutls could not be found" @@ -23999,18 +10618,14 @@ fi fi if test $HAVE_GNUTLS = 1; then - { $as_echo "$as_me:$LINENO: checking for gcry_control in -lgcrypt" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gcry_control in -lgcrypt" >&5 $as_echo_n "checking for gcry_control in -lgcrypt... " >&6; } -if test "${ac_cv_lib_gcrypt_gcry_control+set}" = set; then +if ${ac_cv_lib_gcrypt_gcry_control+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lgcrypt $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -24028,50 +10643,25 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_gcrypt_gcry_control=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_gcrypt_gcry_control=no + ac_cv_lib_gcrypt_gcry_control=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_gcrypt_gcry_control" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gcrypt_gcry_control" >&5 $as_echo "$ac_cv_lib_gcrypt_gcry_control" >&6; } -if test "x$ac_cv_lib_gcrypt_gcry_control" = x""yes; then +if test "x$ac_cv_lib_gcrypt_gcry_control" = xyes; then : have_gcrypt=yes else have_gcrypt=no fi if test "$have_gcrypt" = "no"; then - { $as_echo "$as_me:$LINENO: WARNING: Missing support for thread-safe operation in GNUTLS. Disabling TLS support)." >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Missing support for thread-safe operation in GNUTLS. Disabling TLS support)." >&5 $as_echo "$as_me: WARNING: Missing support for thread-safe operation in GNUTLS. Disabling TLS support)." >&2;} HAVE_GNUTLS=0 else @@ -24082,9 +10672,9 @@ # Restore the CFLAGS and LIBS because AM_PATH_TLS messes them LIBS="$saved_LIBS" CFLAGS="$saved_CFLAGS" - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } - { $as_echo "$as_me:$LINENO: WARNING: Missing support for TLS functionality." >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Missing support for TLS functionality." >&5 $as_echo "$as_me: WARNING: Missing support for TLS functionality." >&2;} echo echo "You may not want to build base without libgnutls." @@ -24092,119 +10682,29 @@ echo "If you really want to build -base without TLS support," echo "add --disable-tls to the configure arguments." else - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } CPPFLAGS="$CPPFLAGS $TLS_CFLAGS" INCLUDE_FLAGS="$INCLUDE_FLAGS $TLS_CFLAGS" LIBS="$TLS_LIBS $LIBS" - -for ac_func in gnutls_transport_set_errno -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then + for ac_func in gnutls_transport_set_errno +do : + ac_fn_c_check_func "$LINENO" "gnutls_transport_set_errno" "ac_cv_func_gnutls_transport_set_errno" +if test "x$ac_cv_func_gnutls_transport_set_errno" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +#define HAVE_GNUTLS_TRANSPORT_SET_ERRNO 1 _ACEOF fi done if test "$ac_cv_func_gnutls_transport_set_errno" = "no"; then - { $as_echo "$as_me:$LINENO: WARNING: Missing support for thread-safe error handling in GNUTLS. Please check that you have the most recent version installed (2.0 or later chould be fine)." >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Missing support for thread-safe error handling in GNUTLS. Please check that you have the most recent version installed (2.0 or later chould be fine)." >&5 $as_echo "$as_me: WARNING: Missing support for thread-safe error handling in GNUTLS. Please check that you have the most recent version installed (2.0 or later chould be fine)." >&2;} fi fi else - { $as_echo "$as_me:$LINENO: WARNING: Disabled support for TLS funtionality." >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Disabled support for TLS funtionality." >&5 $as_echo "$as_me: WARNING: Disabled support for TLS funtionality." >&2;} HAVE_GNUTLS=0 fi @@ -24224,7 +10724,7 @@ HAVE_MDNS=0 HAVE_AVAHI=0 # Check whether --enable-zeroconf was given. -if test "${enable_zeroconf+set}" = set; then +if test "${enable_zeroconf+set}" = set; then : enableval=$enable_zeroconf; else enable_zeroconf=yes @@ -24232,154 +10732,20 @@ # Check whether --with-zeroconf-api was given. -if test "${with_zeroconf_api+set}" = set; then +if test "${with_zeroconf_api+set}" = set; then : withval=$with_zeroconf_api; zeroconf_api="$withval" else zeroconf_api="any" fi -if test $enable_zeroconf = yes; then - if test "$zeroconf_api" = "any" || test "$zeroconf_api" = "mdns"; then - -for ac_header in dns_sd.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then +if test $enable_zeroconf = yes; then + if test "$zeroconf_api" = "any" || test "$zeroconf_api" = "mdns"; then + for ac_header in dns_sd.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "dns_sd.h" "ac_cv_header_dns_sd_h" "$ac_includes_default" +if test "x$ac_cv_header_dns_sd_h" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define HAVE_DNS_SD_H 1 _ACEOF have_mdns=yes else @@ -24389,18 +10755,14 @@ done if test "$have_mdns" = "yes"; then - { $as_echo "$as_me:$LINENO: checking for DNSServiceBrowse in -ldns_sd" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DNSServiceBrowse in -ldns_sd" >&5 $as_echo_n "checking for DNSServiceBrowse in -ldns_sd... " >&6; } -if test "${ac_cv_lib_dns_sd_DNSServiceBrowse+set}" = set; then +if ${ac_cv_lib_dns_sd_DNSServiceBrowse+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldns_sd $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -24418,43 +10780,18 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dns_sd_DNSServiceBrowse=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dns_sd_DNSServiceBrowse=no + ac_cv_lib_dns_sd_DNSServiceBrowse=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dns_sd_DNSServiceBrowse" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dns_sd_DNSServiceBrowse" >&5 $as_echo "$ac_cv_lib_dns_sd_DNSServiceBrowse" >&6; } -if test "x$ac_cv_lib_dns_sd_DNSServiceBrowse" = x""yes; then +if test "x$ac_cv_lib_dns_sd_DNSServiceBrowse" = xyes; then : have_mdns=yes else have_mdns=no @@ -24467,146 +10804,12 @@ fi fi if test "$zeroconf_api" = "any" || test "$zeroconf_api" = "avahi"; then - -for ac_header in avahi-client/client.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then + for ac_header in avahi-client/client.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "avahi-client/client.h" "ac_cv_header_avahi_client_client_h" "$ac_includes_default" +if test "x$ac_cv_header_avahi_client_client_h" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define HAVE_AVAHI_CLIENT_CLIENT_H 1 _ACEOF have_avahi=yes else @@ -24616,18 +10819,14 @@ done if test "$have_avahi" = "yes"; then - { $as_echo "$as_me:$LINENO: checking for avahi_client_new in -lavahi-client" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for avahi_client_new in -lavahi-client" >&5 $as_echo_n "checking for avahi_client_new in -lavahi-client... " >&6; } -if test "${ac_cv_lib_avahi_client_avahi_client_new+set}" = set; then +if ${ac_cv_lib_avahi_client_avahi_client_new+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lavahi-client $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -24645,43 +10844,18 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_avahi_client_avahi_client_new=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_avahi_client_avahi_client_new=no + ac_cv_lib_avahi_client_avahi_client_new=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_avahi_client_avahi_client_new" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_avahi_client_avahi_client_new" >&5 $as_echo "$ac_cv_lib_avahi_client_avahi_client_new" >&6; } -if test "x$ac_cv_lib_avahi_client_avahi_client_new" = x""yes; then +if test "x$ac_cv_lib_avahi_client_avahi_client_new" = xyes; then : have_avahi=yes else have_avahi=no @@ -24711,7 +10885,7 @@ #-------------------------------------------------------------------- HAVE_ICU=0 # Check whether --enable-icu was given. -if test "${enable_icu+set}" = set; then +if test "${enable_icu+set}" = set; then : enableval=$enable_icu; else enable_icu=yes @@ -24725,9 +10899,9 @@ if test -z "$ICU_CONFIG"; then # Extract the first word of "icu-config", so it can be a program name with args. set dummy icu-config; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_ICU_CONFIG+set}" = set; then +if ${ac_cv_path_ICU_CONFIG+:} false; then : $as_echo_n "(cached) " >&6 else case $ICU_CONFIG in @@ -24740,14 +10914,14 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_ICU_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS test -z "$ac_cv_path_ICU_CONFIG" && ac_cv_path_ICU_CONFIG="no" @@ -24756,10 +10930,10 @@ fi ICU_CONFIG=$ac_cv_path_ICU_CONFIG if test -n "$ICU_CONFIG"; then - { $as_echo "$as_me:$LINENO: result: $ICU_CONFIG" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ICU_CONFIG" >&5 $as_echo "$ICU_CONFIG" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -24772,23 +10946,23 @@ echo "See http://site.icu-project.org/ for help." else ICU_VERSION=`$ICU_CONFIG --version` - { $as_echo "$as_me:$LINENO: checking for ICU >= 4.0" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ICU >= 4.0" >&5 $as_echo_n "checking for ICU >= 4.0... " >&6; } found=`expr $ICU_VERSION \>= 4.0` if test "$found" = "1" ; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } ok=yes - { $as_echo "$as_me:$LINENO: checking ICU_LIBS" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking ICU_LIBS" >&5 $as_echo_n "checking ICU_LIBS... " >&6; } ICU_LIBS=`$ICU_CONFIG --ldflags-libsonly` - { $as_echo "$as_me:$LINENO: result: $ICU_LIBS" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ICU_LIBS" >&5 $as_echo "$ICU_LIBS" >&6; } - { $as_echo "$as_me:$LINENO: checking ICU_LDFLAGS" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking ICU_LDFLAGS" >&5 $as_echo_n "checking ICU_LDFLAGS... " >&6; } ICU_LDFLAGS=`$ICU_CONFIG --ldflags-searchpath` - { $as_echo "$as_me:$LINENO: result: $ICU_LDFLAGS" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ICU_LDFLAGS" >&5 $as_echo "$ICU_LDFLAGS" >&6; } else ICU_LIBS="" @@ -24807,153 +10981,13 @@ fi if test "$have_icu" = "yes"; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } - - - - - - - - -for ac_header in unicode/uloc.h unicode/ulocdata.h unicode/ucurr.h unicode/uregex.h unicode/ucal.h unicode/unum.h unicode/udat.h unicode/udatpg.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then + for ac_header in unicode/uloc.h unicode/ulocdata.h unicode/ucurr.h unicode/uregex.h unicode/ucal.h unicode/unum.h unicode/udat.h unicode/udatpg.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF @@ -24967,9 +11001,9 @@ LDIR_FLAGS="$LDIR_FLAGS $ICU_LDFLAGS" HAVE_ICU=1 else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } - { $as_echo "$as_me:$LINENO: WARNING: The International Components for Unicode (ICU) development headers and libraries do not appear to be available on this system. Please install them and re-run configure. If you do not do this gnustep-base will build but will have important functionality missing!" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: The International Components for Unicode (ICU) development headers and libraries do not appear to be available on this system. Please install them and re-run configure. If you do not do this gnustep-base will build but will have important functionality missing!" >&5 $as_echo "$as_me: WARNING: The International Components for Unicode (ICU) development headers and libraries do not appear to be available on this system. Please install them and re-run configure. If you do not do this gnustep-base will build but will have important functionality missing!" >&2;} fi fi @@ -24980,7 +11014,7 @@ #-------------------------------------------------------------------- # Check whether --with-gmp-include was given. -if test "${with_gmp_include+set}" = set; then +if test "${with_gmp_include+set}" = set; then : withval=$with_gmp_include; gmp_incdir="$withval" else gmp_incdir="no" @@ -24989,7 +11023,7 @@ # Check whether --with-gmp-library was given. -if test "${with_gmp_library+set}" = set; then +if test "${with_gmp_library+set}" = set; then : withval=$with_gmp_library; gmp_libdir="$withval" else gmp_libdir="no" @@ -25016,146 +11050,12 @@ fi USE_GMP=0 - for ac_header in gmp.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then +do : + ac_fn_c_check_header_mongrel "$LINENO" "gmp.h" "ac_cv_header_gmp_h" "$ac_includes_default" +if test "x$ac_cv_header_gmp_h" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define HAVE_GMP_H 1 _ACEOF fi @@ -25163,18 +11063,14 @@ done if test $ac_cv_header_gmp_h = yes; then - { $as_echo "$as_me:$LINENO: checking for mpf_abs in -lgmp" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for mpf_abs in -lgmp" >&5 $as_echo_n "checking for mpf_abs in -lgmp... " >&6; } -if test "${ac_cv_lib_gmp_mpf_abs+set}" = set; then +if ${ac_cv_lib_gmp_mpf_abs+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lgmp $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -25192,61 +11088,32 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_gmp_mpf_abs=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_gmp_mpf_abs=no + ac_cv_lib_gmp_mpf_abs=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_gmp_mpf_abs" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gmp_mpf_abs" >&5 $as_echo "$ac_cv_lib_gmp_mpf_abs" >&6; } -if test "x$ac_cv_lib_gmp_mpf_abs" = x""yes; then +if test "x$ac_cv_lib_gmp_mpf_abs" = xyes; then : gmp_ok=yes else gmp_ok=no fi if test "$gmp_ok" = no; then - { $as_echo "$as_me:$LINENO: checking for __gmpf_abs in -lgmp" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for __gmpf_abs in -lgmp" >&5 $as_echo_n "checking for __gmpf_abs in -lgmp... " >&6; } -if test "${ac_cv_lib_gmp___gmpf_abs+set}" = set; then +if ${ac_cv_lib_gmp___gmpf_abs+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lgmp $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -25263,44 +11130,19 @@ ; return 0; } -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_gmp___gmpf_abs=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_gmp___gmpf_abs=no + ac_cv_lib_gmp___gmpf_abs=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_gmp___gmpf_abs" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gmp___gmpf_abs" >&5 $as_echo "$ac_cv_lib_gmp___gmpf_abs" >&6; } -if test "x$ac_cv_lib_gmp___gmpf_abs" = x""yes; then +if test "x$ac_cv_lib_gmp___gmpf_abs" = xyes; then : gmp_ok=yes else gmp_ok=no @@ -25319,16 +11161,12 @@ # Check whether nl_langinfo(CODESET) is supported, needed by Unicode.m. #-------------------------------------------------------------------- - { $as_echo "$as_me:$LINENO: checking for nl_langinfo and CODESET" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for nl_langinfo and CODESET" >&5 $as_echo_n "checking for nl_langinfo and CODESET... " >&6; } -if test "${am_cv_langinfo_codeset+set}" = set; then +if ${am_cv_langinfo_codeset+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int @@ -25339,47 +11177,20 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : am_cv_langinfo_codeset=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - am_cv_langinfo_codeset=no + am_cv_langinfo_codeset=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $am_cv_langinfo_codeset" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_langinfo_codeset" >&5 $as_echo "$am_cv_langinfo_codeset" >&6; } if test $am_cv_langinfo_codeset = yes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_LANGINFO_CODESET 1 -_ACEOF +$as_echo "#define HAVE_LANGINFO_CODESET 1" >>confdefs.h fi @@ -25391,16 +11202,12 @@ #-------------------------------------------------------------------- # Check for -Wdeclaration-after-statement #-------------------------------------------------------------------- -{ $as_echo "$as_me:$LINENO: checking whether the compiler supports -Wdeclaration-after-statement" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the compiler supports -Wdeclaration-after-statement" >&5 $as_echo_n "checking whether the compiler supports -Wdeclaration-after-statement... " >&6; } saved_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -Wdeclaration-after-statement" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -25411,36 +11218,15 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : HAS_W_DECL_AFTER_STATEMENT=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - HAS_W_DECL_AFTER_STATEMENT=no + HAS_W_DECL_AFTER_STATEMENT=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext CFLAGS="$saved_CFLAGS" -{ $as_echo "$as_me:$LINENO: result: $HAS_W_DECL_AFTER_STATEMENT" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $HAS_W_DECL_AFTER_STATEMENT" >&5 $as_echo "$HAS_W_DECL_AFTER_STATEMENT" >&6; } if test x"$HAS_W_DECL_AFTER_STATEMENT" = x"yes"; then @@ -25456,7 +11242,7 @@ #-------------------------------------------------------------------- # Check whether --with-gdomap-port was given. -if test "${with_gdomap_port+set}" = set; then +if test "${with_gdomap_port+set}" = set; then : withval=$with_gdomap_port; gdomap_port="$withval" else gdomap_port="no" @@ -25473,10 +11259,10 @@ #-------------------------------------------------------------------- # Check if we should install gdomap as setuid #-------------------------------------------------------------------- -{ $as_echo "$as_me:$LINENO: checking if we should install gdomap as setuid" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we should install gdomap as setuid" >&5 $as_echo_n "checking if we should install gdomap as setuid... " >&6; } # Check whether --enable-setuid-gdomap was given. -if test "${enable_setuid_gdomap+set}" = set; then +if test "${enable_setuid_gdomap+set}" = set; then : enableval=$enable_setuid_gdomap; ac_cv_setuid_gdomap=$enableval else ac_cv_setuid_gdomap="no" @@ -25484,11 +11270,11 @@ if test "$ac_cv_setuid_gdomap" = "yes"; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; }; GNUSTEP_INSTALL_GDOMAP_AS_SETUID="yes" else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; }; GNUSTEP_INSTALL_GDOMAP_AS_SETUID="no" fi @@ -25500,7 +11286,7 @@ # help file. #-------------------------------------------------------------------- # Check whether --enable-openssl was given. -if test "${enable_openssl+set}" = set; then +if test "${enable_openssl+set}" = set; then : enableval=$enable_openssl; else enable_openssl=yes @@ -25508,7 +11294,7 @@ # Check whether --with-openssl-include was given. -if test "${with_openssl_include+set}" = set; then +if test "${with_openssl_include+set}" = set; then : withval=$with_openssl_include; openssl_incdir="$withval" else openssl_incdir="no" @@ -25516,7 +11302,7 @@ # Check whether --with-openssl-library was given. -if test "${with_openssl_library+set}" = set; then +if test "${with_openssl_library+set}" = set; then : withval=$with_openssl_library; openssl_libdir="$withval" else openssl_libdir="no" @@ -25531,12 +11317,12 @@ #-------------------------------------------------------------------- # Record the version #-------------------------------------------------------------------- -{ $as_echo "$as_me:$LINENO: checking for the version of gnustep-base we are compiling" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for the version of gnustep-base we are compiling" >&5 $as_echo_n "checking for the version of gnustep-base we are compiling... " >&6; } if test -f "Version"; then . ./Version fi -{ $as_echo "$as_me:$LINENO: result: $VERSION" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $VERSION" >&5 $as_echo "$VERSION" >&6; } @@ -25576,13 +11362,13 @@ case $ac_val in #( *${as_nl}*) case $ac_var in #( - *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) $as_unset $ac_var ;; + *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done @@ -25590,8 +11376,8 @@ (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" @@ -25613,12 +11399,23 @@ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then - test "x$cache_file" != "x/dev/null" && - { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} - cat confcache >$cache_file + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi else - { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi @@ -25632,14 +11429,15 @@ ac_libobjs= ac_ltlibobjs= +U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. - ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs @@ -25648,13 +11446,14 @@ -: ${CONFIG_STATUS=./config.status} +: "${CONFIG_STATUS=./config.status}" ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. @@ -25664,17 +11463,18 @@ debug=false ac_cs_recheck=false ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which @@ -25682,23 +11482,15 @@ alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; esac - fi - - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - as_nl=' ' export as_nl @@ -25706,7 +11498,13 @@ as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else @@ -25717,7 +11515,7 @@ as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; - case $arg in + case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; @@ -25740,13 +11538,6 @@ } fi -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - # IFS # We need space, tab and new line, in precisely that order. Quoting is @@ -25756,15 +11547,16 @@ IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. -case $0 in +as_myself= +case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done IFS=$as_save_IFS ;; @@ -25776,12 +11568,16 @@ fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } + exit 1 fi -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' @@ -25793,7 +11589,89 @@ LANGUAGE=C export LANGUAGE -# Required to use basename. +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr @@ -25807,8 +11685,12 @@ as_basename=false fi +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi -# Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ @@ -25828,76 +11710,25 @@ } s/.*/./; q'` -# CDPATH. -$as_unset CDPATH - - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in +case `echo -n x` in #((((( -n*) - case `echo 'x\c'` in + case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then @@ -25912,49 +11743,85 @@ # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. + # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' + as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then - as_mkdir_p=: + as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -25964,13 +11831,19 @@ exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 -# Save the log message, to keep $[0] and so on meaningful, and to +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by $as_me, which was -generated by GNU Autoconf 2.63. Invocation command line was +generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -26001,13 +11874,15 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. -Usage: $0 [OPTION]... [FILE]... +Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit + --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files @@ -26023,16 +11898,17 @@ Configuration headers: $config_headers -Report bugs to ." +Report bugs to the package provider." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ config.status -configured by $0, generated by GNU Autoconf 2.63, - with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" -Copyright (C) 2008 Free Software Foundation, Inc. +Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." @@ -26047,11 +11923,16 @@ while test $# != 0 do case $1 in - --*=*) + --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; *) ac_option=$1 ac_optarg=$2 @@ -26065,27 +11946,29 @@ ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; esac - CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" + as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac - CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" + as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header - { $as_echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; };; + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ @@ -26093,11 +11976,10 @@ ac_cs_silent=: ;; # This is an error. - -*) { $as_echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } ;; + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; - *) ac_config_targets="$ac_config_targets $1" + *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac @@ -26114,7 +11996,7 @@ _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then - set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' @@ -26148,9 +12030,7 @@ "base.make") CONFIG_FILES="$CONFIG_FILES base.make" ;; "Headers/GNUstepBase/GSConfig.h") CONFIG_FILES="$CONFIG_FILES Headers/GNUstepBase/GSConfig.h" ;; - *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done @@ -26172,26 +12052,24 @@ # after its creation but before its name has been assigned to `$tmp'. $debug || { - tmp= + tmp= ac_tmp= trap 'exit_status=$? - { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 + trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" + test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") -} || -{ - $as_echo "$as_me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. @@ -26199,7 +12077,13 @@ if test -n "$CONFIG_FILES"; then -ac_cr=' ' +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' @@ -26207,7 +12091,7 @@ ac_cs_awk_cr=$ac_cr fi -echo 'BEGIN {' >"$tmp/subs1.awk" && +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF @@ -26216,24 +12100,18 @@ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } -ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi @@ -26241,7 +12119,7 @@ rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$tmp/subs1.awk" <<\\_ACAWK && +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h @@ -26255,7 +12133,7 @@ t delim :nl h -s/\(.\{148\}\).*/\1/ +s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p @@ -26269,7 +12147,7 @@ t nl :delim h -s/\(.\{148\}\).*/\1/ +s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p @@ -26289,7 +12167,7 @@ rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK -cat >>"\$tmp/subs1.awk" <<_ACAWK && +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" @@ -26321,23 +12199,29 @@ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat -fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ - || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 -$as_echo "$as_me: error: could not setup config files machinery" >&2;} - { (exit 1); exit 1; }; } +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/ -s/:*\${srcdir}:*/:/ -s/:*@srcdir@:*/:/ -s/^\([^=]*=[ ]*\):*/\1/ + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// s/^[^=]*=[ ]*$// }' fi @@ -26349,7 +12233,7 @@ # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then -cat >"$tmp/defines.awk" <<\_ACAWK || +cat >"$ac_tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF @@ -26361,13 +12245,11 @@ # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do - ac_t=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_t"; then + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then break elif $ac_last_try; then - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi @@ -26452,9 +12334,7 @@ _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 -$as_echo "$as_me: error: could not setup config headers machinery" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" @@ -26467,9 +12347,7 @@ esac case $ac_mode$ac_tag in :[FHL]*:*);; - :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 -$as_echo "$as_me: error: invalid tag $ac_tag" >&2;} - { (exit 1); exit 1; }; };; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac @@ -26488,7 +12366,7 @@ for ac_f do case $ac_f in - -) ac_f="$tmp/stdin";; + -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. @@ -26497,12 +12375,10 @@ [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || - { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 -$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} - { (exit 1); exit 1; }; };; + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - ac_file_inputs="$ac_file_inputs '$ac_f'" + as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't @@ -26513,7 +12389,7 @@ `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. @@ -26525,10 +12401,8 @@ esac case $ac_tag in - *:-:* | *:-) cat >"$tmp/stdin" \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } ;; + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac @@ -26556,47 +12430,7 @@ q } s/.*/./; q'` - { as_dir="$ac_dir" - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } + as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in @@ -26644,7 +12478,6 @@ # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= - ac_sed_dataroot=' /datarootdir/ { p @@ -26654,12 +12487,11 @@ /@docdir@/p /@infodir@/p /@localedir@/p -/@mandir@/p -' +/@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 @@ -26669,7 +12501,7 @@ s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; + s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF @@ -26695,27 +12527,24 @@ s&@abs_top_builddir@&$ac_abs_top_builddir&;t t $ac_datarootdir_hack " -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&5 + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&2;} +which seems to be undefined. Please make sure it is defined" >&2;} - rm -f "$tmp/stdin" + rm -f "$ac_tmp/stdin" case $ac_file in - -) cat "$tmp/out" && rm -f "$tmp/out";; - *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; :H) # @@ -26724,27 +12553,21 @@ if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" - } >"$tmp/config.h" \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } - if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" - mv "$tmp/config.h" "$ac_file" \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ - || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 -$as_echo "$as_me: error: could not create -" >&2;} - { (exit 1); exit 1; }; } + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 fi ;; @@ -26754,15 +12577,12 @@ done # for ac_tag -{ (exit 0); exit 0; } +as_fn_exit 0 _ACEOF -chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || - { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. @@ -26783,7 +12603,7 @@ exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } + $ac_cs_success || as_fn_exit 1 fi # @@ -26827,7 +12647,7 @@ case $ac_arg in *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac - ac_sub_configure_args="$ac_sub_configure_args '$ac_arg'" ;; + as_fn_append ac_sub_configure_args " '$ac_arg'" ;; esac done @@ -26856,49 +12676,9 @@ test -d "$srcdir/$ac_dir" || continue ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)" - $as_echo "$as_me:$LINENO: $ac_msg" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5 $as_echo "$ac_msg" >&6 - { as_dir="$ac_dir" - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } + as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in @@ -26945,7 +12725,7 @@ # This should be Cygnus configure. ac_sub_configure=$ac_aux_dir/configure else - { $as_echo "$as_me:$LINENO: WARNING: no configuration information is in $ac_dir" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: no configuration information is in $ac_dir" >&5 $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;} ac_sub_configure= fi @@ -26959,21 +12739,19 @@ ac_sub_cache_file=$ac_top_build_prefix$cache_file ;; esac - { $as_echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5 $as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;} # The eval makes quoting arguments work. eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \ --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" || - { { $as_echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5 -$as_echo "$as_me: error: $ac_sub_configure failed for $ac_dir" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5 fi cd "$ac_popdir" done fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi debian/patches/info-direntry.patch0000664000000000000000000000323711634411765014446 0ustar 2009-08-16 Yavor Doganov * Documentation/coding-standards.texi: * Documentation/manual/manual.texi: Use unambiguous @setfilename; and proper @dircategory/@direntry. --- gnustep-base-1.20.0.orig/Documentation/coding-standards.texi +++ gnustep-base-1.20.0/Documentation/coding-standards.texi @@ -1,15 +1,12 @@ \input texinfo @c -*-texinfo-*- -@setfilename coding-standards.info +@setfilename gs-standards.info @set DATE 26 Jun 1996 -@ifinfo -@format -INFO-DIR-SECTION GNUstep -START-INFO-DIR-ENTRY -* Coding: (coding-standards). Coding Standards for GNUstep Libraries -END-INFO-DIR-ENTRY -@end format -@end ifinfo +@dircategory GNU organization +@direntry +* GNUstepStandards: (gs-standards). Coding Standards for GNUstep + Libraries. +@end direntry @ifinfo Copyright @copyright{} 1997-2005 Free Software Foundation --- gnustep-base-1.20.0.orig/Documentation/manual/manual.texi +++ gnustep-base-1.20.0/Documentation/manual/manual.texi @@ -1,18 +1,16 @@ \input texinfo @c -*-texinfo-*- @c %**start of header -@setfilename manual.info +@setfilename gs-base.info @settitle Objective-C GNUstep Base Programming Manual @c %**end of header -@ifinfo -@format -INFO-DIR-SECTION GNUstep -START-INFO-DIR-ENTRY -* GNUstepBase: (manual). Objective C Language and GNUstep Base Library -END-INFO-DIR-ENTRY -@end format -@end ifinfo +@dircategory Software libraries +@direntry +* GNUstepBase: (gs-base). Objective-C Language and GNUstep Base + Library Programming Manual. +@end direntry + @ifinfo Copyright @copyright{} 2001 Free Software Foundation debian/patches/avoid-tools-extra-linkage.patch0000664000000000000000000000174211634411765016645 0ustar 2009-08-09 Yavor Doganov * Tools/GNUmakefile (CONFIG_SYSTEM_LIBS): * Tools/make_strings/GNUmakefile (CONFIG_SYSTEM_LIBS): Define to the empty string to avoid linking the tools against external libraries. --- gnustep-base-1.20.0.orig/Tools/GNUmakefile +++ gnustep-base-1.20.0/Tools/GNUmakefile @@ -102,6 +102,10 @@ xmlparse_OBJC_FILES = xmlparse.m HTMLLinker_OBJC_FILES = HTMLLinker.m +# Reset this variable (defined in config.mak) to avoid useless linkage +# against the libs gnustep-base uses. +CONFIG_SYSTEM_LIBS := + DOCUMENT_NAME = autogsdoc # Documentation rules for autogsdoc --- gnustep-base-1.20.0.orig/Tools/make_strings/GNUmakefile +++ gnustep-base-1.20.0/Tools/make_strings/GNUmakefile @@ -35,6 +35,10 @@ StringsEntry.m \ StringsFile.m +# Reset this variable (defined in config.mak) to avoid useless linkage +# against the libs gnustep-base uses. +CONFIG_SYSTEM_LIBS := + include GNUmakefile.preamble include $(GNUSTEP_MAKEFILES)/tool.make debian/patches/pldes-manpage-rename.patch0000664000000000000000000000276211634411765015641 0ustar Author: Hubert Chathi Comment: Record the pl tool rename. --- gnustep-base-1.20.0.orig/Tools/pldes.1 +++ gnustep-base-1.20.0/Tools/pldes.1 @@ -10,7 +10,7 @@ .\" .TH PLDES 1 "August 2003" GNUstep "GNUstep System Manual" .SH NAME -pl, pldes, plser, plmerge, plparse, pl2link \- property list tools +plio, pldes, plser, plmerge, plparse, pl2link \- property list tools .SH SYNOPSIS .nf .BI "pldes " "filename(s)" @@ -25,7 +25,7 @@ .nl .BI "pl2link " "input-file" " [ " "destination-file" " ]" .nl -.BI "pl -input [ " "input-file" " ] " " -output [ " "destination-file" " ]" +.BI "plio -input [ " "input-file" " ] " " -output [ " "destination-file" " ]" .nl .SH DESCRIPTION @@ -59,9 +59,9 @@ .IP "\fBpl2link\fR \fIinput-file\fR [ \fIdestination-file\fR ]" 4 Produces a desktop link file for KDE and Gnome for the given text representation of a property list. -.IP "\fBpl\fR \fI-input\fR [ \fIinput-file\fR ]" 4 +.IP "\fBplio\fR \fI-input\fR [ \fIinput-file\fR ]" 4 Takes the serialized plist represented by input-file and outputs it to standard output. -.IP "\fBpl\fR \fI-output\fR [ \fIdestination-file\fR ]" 4 +.IP "\fBplio\fR \fI-output\fR [ \fIdestination-file\fR ]" 4 Takes a plist from standard input and serializes it into destination-file. .PP @@ -84,4 +84,5 @@ was written by Fred Kiefer . .PP .B pl -was written by Gregory Casamento . +(renamed to plio in Debian) was written by Gregory Casamento +. debian/patches/series0000664000000000000000000000032012257556060012037 0ustar kfreebsd-fake-main.patch info-direntry.patch avoid-nsl-linkage.patch avoid-tools-extra-linkage.patch pldes-manpage-rename.patch manpage-fixes.patch autoreconf.patch recent-libxml2-fix.patch add-chapter.patch debian/patches/manpage-fixes.patch0000664000000000000000000002437611634411765014410 0ustar 2009-08-09 Yavor Doganov * Tools/autogsdoc.1: * Tools/cvtenc.1: * Tools/defaults.1: * Tools/gdomap.8: * Tools/pldes.1: Various minor formatting fixes. --- gnustep-base.orig/Tools/autogsdoc.1 +++ gnustep-base/Tools/autogsdoc.1 @@ -242,17 +242,17 @@ indent it nicely ... the reformatting is .I not performed on any text inside an element. When the text is -reformatted, it is broken into whitespace separated -'words' which are then subjected to some extra processing ... +reformatted, it is broken into whitespace separated \*(lqwords\*(rq +which are then subjected to some extra processing ... .IP "" 4 Certain well known constants such as YES, NO, and nil are enclosed in -... markup. +\&... markup. .IP "" 4 The names of method arguments within method descriptions are enclosed in ... markup. .IP "" 4 Method names (beginning with a plus or minus) are enclosed in -... markup. E.g. "-init" (without the quotes) would be +\&... markup. E.g. "\-init" (without the quotes) would be wrapped in a GSDoc reference element to point to the init method of the current class or, if only one known class had an init method, it would refer to the method of that class. Note the fact that the method name must be @@ -263,7 +263,7 @@ brackets) are enclosed in ... markup. e.g. '[NSObject-init]', will create a reference to the init method of NSObject (either the class proper, or any of its categories), while -'[(NSCopying)-copyWithZone:]', creates a reference to a method in the +\&'[(NSCopying)-copyWithZone:]', creates a reference to a method in the NSCopying protocol. Note that no spaces must appear between the square brackets in these specifiers. Protocol names are enclosed in round brackets rather than the customary angle brackets, because GSDoc is an XML @@ -278,18 +278,18 @@ .SH ARGUMENTS AND DEFAULTS .P -The tool accepts certain user defaults (which can of course be supplied as -command-line arguments by prepending '-' before the default name and giving -the value afterwards, as in -Clean YES): +The tool accepts certain user defaults (which can of course be +supplied as command-line arguments by prepending '\-' before the +default name and giving the value afterwards, as in \-Clean YES): .IP "\fBClean" 4 If this boolean value is set to YES, then rather than generating documentation, the tool removes all GSDoc files generated in the -project, and all html files generated from them (as well as any -which would be generated from GSDoc files listed explicitly), -and finally removes the project index file. -The only exception to this is that template GSDoc files (i.e. those -specified using "-ConstantsTemplate ...", "-FunctionsTemplate ..." -arguments etc) are not deleted unless the CleanTemplates flag is set. +project, and all html files generated from them (as well as any which +would be generated from GSDoc files listed explicitly), and finally +removes the project index file. The only exception to this is that +template GSDoc files (i.e. those specified using +"\-ConstantsTemplate ...", "\-FunctionsTemplate ..." arguments etc) +are not deleted unless the CleanTemplates flag is set. .IP "\fBCleanTemplates" 4 This flag specifies whether template GSDoc files are to be removed along with other files when the Clean option is specified. @@ -312,21 +312,19 @@ .I body element) in the template. .IP "\fBDeclared" 4 -Specify where headers are to be documented as being found. -The actual name produced in the documentation is formed by appending -the last component of the header file name to the value of this -default. -If this default is not specified, the full name of the header file -(as supplied on the command line), with the HeaderDirectory -default prepended, is used. -A typical usage of this might be '"-Declared Foundation"' -when generating documentation for the GNUstep base library. This -would result in the documentation saying that NSString is declared -in 'Foundation/NSString.h' +Specify where headers are to be documented as being found. The actual +name produced in the documentation is formed by appending the last +component of the header file name to the value of this default. If +this default is not specified, the full name of the header file (as +supplied on the command line), with the HeaderDirectory default +prepended, is used. A typical usage of this might be '"\-Declared +Foundation"' when generating documentation for the GNUstep base +library. This would result in the documentation saying that NSString +is declared in 'Foundation/NSString.h' .IP "\fBDocumentAllInstanceVariables" 4 This flag permits you to generate documentation for all instance variables. Normally, only those explicitly declared 'public' or -'protected' will be documented. +\&'protected' will be documented. .IP "\fBDocumentInstanceVariables" 4 This flag permits you to turn off documentation for instance variables completely. Normally, explicitly declared 'public' or 'protected' instance @@ -425,7 +423,7 @@ A filename to be used to output dependency information for make. This will take the form of listing all header and source files known for the project as dependencies of the project name (see -'Project'). +\&'Project'). .IP "\fBProject" 4 May be used to specify the name of this project ... determines the name of the index reference file produced as part of the documentation @@ -436,10 +434,10 @@ the igsdoc index/reference files used by external projects, along with values to be used to map the filenames found in the indexes. For example, if a project index (igsdoc) file says that the class -'Foo' is found in the file 'Foo', and the +\&'Foo' is found in the file 'Foo', and the path associated with that project index is '/usr/doc/proj', Then generated html output may reference the class as being in -'/usr/doc/prj/Foo.html' . Note that a dictionary may be +\&'/usr/doc/prj/Foo.html' . Note that a dictionary may be given on the command line by using the standard PropertyList format (not the XML format of OS X), using semicolons as line-separators, and enclosing it in single quotes. --- gnustep-base.orig/Tools/cvtenc.1 +++ gnustep-base/Tools/cvtenc.1 @@ -29,17 +29,17 @@ encoding. If this is not specified, the default encoding for the current locale is used. .IP "\fB\-EscapeIn\fR \fIYES|NO\fR" 4 -Specify '-EscapeIn YES' (the default is 'NO') to parse the input for \\u +Specify '\-EscapeIn YES' (the default is 'NO') to parse the input for \\u escape sequences (as in property lists). .IP "\fB\-EscapeOut\fR \fIYES|NO\fR" 4 -Specify '-EscapeOut YES' (the default is 'NO') to generate \\u escape +Specify '\-EscapeOut YES' (the default is 'NO') to generate \\u escape sequences (as in property lists) in the output. Note, this might produce unexpected results for some encodings. .IP "\fB\-Unicode\fR \fIIN|OUT\fR" 4 -Specify '-Unicode IN' (or '-Unicode OUT') to control the direction of +Specify '\-Unicode IN' (or '\-Unicode OUT') to control the direction of conversion rather than having the tool guess it on the basis of the content -it reads. Using '-Unicode IN' means that the tool reads UTF16 data and -writes C-String data, while using '-Unicode OUT' merans that the tool reads +it reads. Using '\-Unicode IN' means that the tool reads UTF16 data and +writes C-String data, while using '\-Unicode OUT' merans that the tool reads C-String data and writes UTF16 data. --- gnustep-base.orig/Tools/defaults.1 +++ gnustep-base/Tools/defaults.1 @@ -15,9 +15,9 @@ This program replaces the old NeXTstep style dread, dwrite, and dremove programs. .PP -If you have access to another user's defaults database, you may include -\&'-u username' before any other options to use that user's database rather -than your own. +If you have access to another user's defaults database, you may +include \&'\-u username' before any other options to use that user's +database rather than your own. .PP defaults read [ domain [ key] ] .IP @@ -77,7 +77,7 @@ list options for the defaults command. .SH FILES -.IT ~/GNUstep/Defaults/.GNUstepDefaults +.IP ~/GNUstep/Defaults/.GNUstepDefaults holds defaults for a user .SH BUGS --- gnustep-base.orig/Tools/gdomap.8 +++ gnustep-base/Tools/gdomap.8 @@ -41,7 +41,7 @@ .B gdomap The gdomap daemon is used by GNUstep programs to look up distributed objects of processes running across the network (and between different user accounts -on a single machine). The deamon is NOT used for lookup where two processes +on a single machine). The daemon is NOT used for lookup where two processes belonging to the same user are using a host-local connection. This manual page explains the usage of gdomap. For design and implementation information (and special notes for packagers), please see the HTML @@ -77,14 +77,14 @@ The IP addresses should be in standard 'dot' notation, one per line. Empty lines are permitted in the configuration file. Anything on a line after a hash ('#') is ignored. -You tell gdomap about the config file with the '-c' command line option. +You tell gdomap about the config file with the '\-c' command line option. .PP gdomap uses the SIOCGIFCONF ioctl to build a list of IP addresses and netmasks for the network interface cards on your machine. On some operating systems, this facility is not available (or is broken), so you must tell -gdomap the addresses and masks of the interfaces using the '-a' command line -option. The file named with '-a' should contain a series of lines with +gdomap the addresses and masks of the interfaces using the '\-a' command line +option. The file named with '\-a' should contain a series of lines with space separated pairs of addresses and masks in 'dot' notation. You must NOT include loopback interfaces in this list. If you want to support broadcasting of probe information on a network, --- gnustep-base.orig/Tools/pldes.1 +++ gnustep-base/Tools/pldes.1 @@ -14,19 +14,19 @@ .SH SYNOPSIS .nf .BI "pldes " "filename(s)" -.nl +.nf .BI "plget " "key" [ more keys ] -.nl +.nf .BI "plser " "filename(s)" -.nl +.nf .BI "plmerge [ " "destination-file" " ] [ " "input-file(s)" " ]" -.nl +.nf .BI "plparse " "filename(s)" -.nl +.nf .BI "pl2link " "input-file" " [ " "destination-file" " ]" -.nl +.nf .BI "plio -input [ " "input-file" " ] " " -output [ " "destination-file" " ]" -.nl +.nf .SH DESCRIPTION .P debian/patches/avoid-nsl-linkage.patch0000664000000000000000000000110111756372372015152 0ustar 2009-08-09 Yavor Doganov * configure.ac: Use AC_SEARCH_LIBS to avoid always appending -lnsl to LIBS. --- gnustep-base.orig/configure.ac +++ gnustep-base/configure.ac @@ -2228,7 +2228,7 @@ # These used by GSFileHandle.m and distributed objects # On some systems we need -lnsl ... so check for that first. #-------------------------------------------------------------------- -AC_CHECK_LIB(nsl, inet_ntop) +AC_SEARCH_LIBS([inet_ntop], [nsl]) AC_CHECK_FUNCS(gethostbyaddr_r inet_aton inet_pton inet_ntop sigaction) USE_ZLIB=0 AC_CHECK_HEADERS(zlib.h) debian/libgnustep-baseN.overrides.m40000664000000000000000000000020011634411765014635 0ustar # The gdnc daemon from the -runtime package is required. libgnustep-base`'SOV_BASE: shlibs-declares-dependency-on-other-package debian/compat0000664000000000000000000000000211634411765010376 0ustar 7 debian/gdomap.default0000664000000000000000000000172211634411765012017 0ustar # Bourne shell compatible script, sourced by /etc/init.d/gdomap to set # additional arguments for gdomap. # # # The GNU Distributed Objects name server accepts the options: # -C help about configuration # -H general help # -I pid file to write pid # -L name perform lookup for name then quit. # -M name machine name for -L and -N # -N list all names registered on host # -P number port number required for R option. # -R name register name locally then quit. # -T type port type for L, R and U options - # tcp_gdo, udp_gdo, # tcp_foreign, udp_foreign. # -U name unregister name locally then quit. # -a file use config file for interface list. # -c file use config file for probe. # -d extra debug logging (normally via syslog). # -f avoid fork() to make debugging easy # -i seconds re-probe at this interval (roughly), min 60 # -p disable probing for other servers # # Kill with SIGUSR1 to obtain a dump of all known peers in /tmp/gdomap.dump # GDOMAP_ARGS="-p" debian/gnustep-base-runtime.gdomap.in0000664000000000000000000000257611756437034015070 0ustar #!/bin/sh ### BEGIN INIT INFO # Provides: gdomap # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start the GNUstep distributed object mapper # Description: Start the GNUstep distributed object mapper ### END INIT INFO set -e set -u PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin DAEMON=@GDOMAP@ NAME=gdomap DESC="GNUstep distributed object mapper" PIDFILE=/var/run/$NAME.pid GDOMAP_ARGS= if [ -f /etc/default/gdomap ]; then . /etc/default/gdomap fi . /lib/lsb/init-functions case "$1" in start) echo -n "Starting $DESC: " start-stop-daemon --start --oknodo --quiet --exec $DAEMON \ -- -I $PIDFILE $GDOMAP_ARGS echo "$NAME." ;; stop) echo -n "Stopping $DESC: " start-stop-daemon --stop --oknodo --quiet --exec $DAEMON \ -- -I $PIDFILE $GDOMAP_ARGS rm -f $PIDFILE echo "$NAME." ;; restart|force-reload) echo -n "Restarting $DESC: " start-stop-daemon --stop --oknodo --quiet --exec $DAEMON \ -- -I $PIDFILE $GDOMAP_ARGS rm -f $PIDFILE sleep 1 start-stop-daemon --start --oknodo --quiet --exec $DAEMON \ -- -I $PIDFILE $GDOMAP_ARGS echo "$NAME." ;; status) status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? ;; *) N=/etc/init.d/$NAME echo "Usage: $N {start|stop|restart|force-reload|status}" >&2 exit 1 ;; esac exit 0 debian/gnustep-base-runtime.postrm.in0000664000000000000000000000171611634411765015136 0ustar #! /bin/sh # postrm script for #PACKAGE# # # see: dh_installdeb(1) set -e # summary of how this script can be called: # * `remove' # * `purge' # * `upgrade' # * `failed-upgrade' # * `abort-install' # * `abort-install' # * `abort-upgrade' # * `disappear' overwrit>r> # for details, see /usr/share/doc/packaging-manual/ case "$1" in purge) rm -f /etc/GNUstep/gdomap_probes rmdir /etc/GNUstep 2>/dev/null || true ;; remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear) : ;; *) echo "postrm called with unknown argument \`$1'" >&2 exit 0 esac # dh_installdeb will replace this with shell code automatically # generated by other debhelper scripts. #DEBHELPER# debian/gnustep-base-runtime.prerm.in0000664000000000000000000000175411634411765014741 0ustar #! /bin/sh # prerm script for gnustep-base # # see: dh_installdeb(1) set -e # summary of how this script can be called: # * `remove' # * `upgrade' # * `failed-upgrade' # * `remove' `in-favour' # * `deconfigure' `in-favour' # `removing' # # for details, see /usr/share/doc/packaging-manual/ case "$1" in remove) if dpkg-statoverride --list @GDOMAP@ >/dev/null; then # override exists. dpkg-statoverride --remove @GDOMAP@ else : fi ;; upgrade|deconfigure) ;; failed-upgrade) ;; *) echo "prerm called with unknown argument \`$1'" >&2 exit 0 ;; esac # dh_installdeb will replace this with shell code automatically # generated by other debhelper scripts. #DEBHELPER# exit 0 debian/HTMLLinker.10000664000000000000000000000352711634411765011202 0ustar .TH HTMLLinker 1 "August 16, 2009" "GNUstep" "GNUstep System Manual" .SH NAME HTMLLinker \- tool to fix up href references in HTML files .SH SYNOPSIS .B HTMLLinker .RI [ options ] .I input files [ .B -l .I relocation file ] [ .B -d .I destination file ] .br .SH DESCRIPTION .B HTMLLinker is a tool to fix href references in HTML files, typically API reference manuals generated by extracting the docstrings from source code by tools such as .BR autogsdoc (1). .PP .B HTMLLinker accepts the following options (multiple .I input files\fR,\fR .I -l and .I -d options are allowed): .SH OPTIONS .TP .B --help Prints a short list of available options. .TP .B --version Displays version information. .TP .B --verbose Prints additional information while processing. .TP .BI -Warn " [YES|NO]" Print additional information about unresolved links. .TP .BI -LinksMarker " [xxx]" Only fix links with attribute \fBrel\f\=\fIxxx\fR .TP .B -FixupAllLinks YES Attempt to fix all links (not only those that are marked with \fI-LinksMarker\fR. .TP .B -PathMappingsFile \fIfile\fR Read the relocation mappings from .I file (in dictionary format). .TP .B -PathMappings '{"\fIpath\fR\fB"="\fR\fIanother_path\fR\fB";}'\fR Use the specified path mappings. .TP .BI -BuildRelocationFileForDir " dir" Build a relocation file for the directory .I dir and save it into \fIdir\fR/table.htmlink. This option is special and prevents any other processing by the linker. .SH SEE ALSO .BR autogsdoc (1), .BR GNUstep (7). .SH AUTHORS .B HTMLLinker was written by Nicola Pero . .P This manual page was added by Yavor Doganov . .SH COPYRIGHT Copyright (C) 2009 Free Software Foundation, Inc. .P Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved.