gpicview-0.2.4/0000755000000000000000000000000012231706136010302 500000000000000gpicview-0.2.4/ltmain.sh0000644000000000000000000105202612231706052012045 00000000000000 # libtool (GNU libtool) 2.4.2 # Written by Gordon Matzigkeit , 1996 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, # 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, # or obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # Usage: $progname [OPTION]... [MODE-ARG]... # # Provide generalized library-building support services. # # --config show all configuration variables # --debug enable verbose shell tracing # -n, --dry-run display commands without modifying any files # --features display basic configuration information and exit # --mode=MODE use operation mode MODE # --preserve-dup-deps don't remove duplicate dependency libraries # --quiet, --silent don't print informational messages # --no-quiet, --no-silent # print informational messages (default) # --no-warn don't display warning messages # --tag=TAG use configuration variables from tag TAG # -v, --verbose print more informational messages than default # --no-verbose don't print the extra informational messages # --version print version information # -h, --help, --help-all print short, long, or detailed help message # # MODE must be one of the following: # # clean remove files from the build directory # compile compile a source file into a libtool object # execute automatically set library path, then run a program # finish complete the installation of libtool libraries # install install libraries or executables # link create a library or an executable # uninstall remove libraries from an installed directory # # MODE-ARGS vary depending on the MODE. When passed as first option, # `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. # Try `$progname --help --mode=MODE' for a more detailed description of MODE. # # When reporting a bug, please describe a test case to reproduce it and # include the following information: # # host-triplet: $host # shell: $SHELL # compiler: $LTCC # compiler flags: $LTCFLAGS # linker: $LD (gnu? $with_gnu_ld) # $progname: (GNU libtool) 2.4.2 Debian-2.4.2-1.3 # automake: $automake_version # autoconf: $autoconf_version # # Report bugs to . # GNU libtool home page: . # General help using GNU software: . PROGRAM=libtool PACKAGE=libtool VERSION="2.4.2 Debian-2.4.2-1.3" TIMESTAMP="" package_revision=1.3337 # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } # NLS nuisances: We save the old values to restore during execute mode. lt_user_locale= lt_safe_locale= for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${$lt_var+set}\" = set; then save_$lt_var=\$$lt_var $lt_var=C export $lt_var lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" fi" done LC_ALL=C LANGUAGE=C export LANGUAGE LC_ALL $lt_unset CDPATH # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of # the _XPG environment variable is not equal to 1 (one), the special # positional parameter $0, within a function call, is the name of the # function. progpath="$0" : ${CP="cp -f"} test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} : ${Xsed="$SED -e 1s/^X//"} # Global variables: EXIT_SUCCESS=0 EXIT_FAILURE=1 EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. exit_status=$EXIT_SUCCESS # Make sure IFS has a sensible default lt_nl=' ' IFS=" $lt_nl" dirname="s,/[^/]*$,," basename="s,^.*/,," # func_dirname file append nondir_replacement # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. func_dirname () { func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi } # func_dirname may be replaced by extended shell implementation # func_basename file func_basename () { func_basename_result=`$ECHO "${1}" | $SED "$basename"` } # func_basename may be replaced by extended shell implementation # func_dirname_and_basename file append nondir_replacement # perform func_basename and func_dirname in a single function # call: # dirname: Compute the dirname of FILE. If nonempty, # add APPEND to the result, otherwise set result # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. # value retuned in "$func_basename_result" # Implementation must be kept synchronized with func_dirname # and func_basename. For efficiency, we do not delegate to # those functions but instead duplicate the functionality here. func_dirname_and_basename () { # Extract subdirectory from the argument. func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` } # func_dirname_and_basename may be replaced by extended shell implementation # func_stripname prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # func_strip_suffix prefix name func_stripname () { case ${2} in .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac } # func_stripname may be replaced by extended shell implementation # These SED scripts presuppose an absolute path with a trailing slash. pathcar='s,^/\([^/]*\).*$,\1,' pathcdr='s,^/[^/]*,,' removedotparts=':dotsl s@/\./@/@g t dotsl s,/\.$,/,' collapseslashes='s@/\{1,\}@/@g' finalslash='s,/*$,/,' # func_normal_abspath PATH # Remove doubled-up and trailing slashes, "." path components, # and cancel out any ".." path components in PATH after making # it an absolute path. # value returned in "$func_normal_abspath_result" func_normal_abspath () { # Start from root dir and reassemble the path. func_normal_abspath_result= func_normal_abspath_tpath=$1 func_normal_abspath_altnamespace= case $func_normal_abspath_tpath in "") # Empty path, that just means $cwd. func_stripname '' '/' "`pwd`" func_normal_abspath_result=$func_stripname_result return ;; # The next three entries are used to spot a run of precisely # two leading slashes without using negated character classes; # we take advantage of case's first-match behaviour. ///*) # Unusual form of absolute path, do nothing. ;; //*) # Not necessarily an ordinary path; POSIX reserves leading '//' # and for example Cygwin uses it to access remote file shares # over CIFS/SMB, so we conserve a leading double slash if found. func_normal_abspath_altnamespace=/ ;; /*) # Absolute path, do nothing. ;; *) # Relative path, prepend $cwd. func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath ;; esac # Cancel out all the simple stuff to save iterations. We also want # the path to end with a slash for ease of parsing, so make sure # there is one (and only one) here. func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` while :; do # Processed it all yet? if test "$func_normal_abspath_tpath" = / ; then # If we ascended to the root using ".." the result may be empty now. if test -z "$func_normal_abspath_result" ; then func_normal_abspath_result=/ fi break fi func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$pathcar"` func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$pathcdr"` # Figure out what to do with it case $func_normal_abspath_tcomponent in "") # Trailing empty path component, ignore it. ;; ..) # Parent dir; strip last assembled component from result. func_dirname "$func_normal_abspath_result" func_normal_abspath_result=$func_dirname_result ;; *) # Actual path component, append it. func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent ;; esac done # Restore leading double-slash if one was found on entry. func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result } # func_relative_path SRCDIR DSTDIR # generates a relative path from SRCDIR to DSTDIR, with a trailing # slash if non-empty, suitable for immediately appending a filename # without needing to append a separator. # value returned in "$func_relative_path_result" func_relative_path () { func_relative_path_result= func_normal_abspath "$1" func_relative_path_tlibdir=$func_normal_abspath_result func_normal_abspath "$2" func_relative_path_tbindir=$func_normal_abspath_result # Ascend the tree starting from libdir while :; do # check if we have found a prefix of bindir case $func_relative_path_tbindir in $func_relative_path_tlibdir) # found an exact match func_relative_path_tcancelled= break ;; $func_relative_path_tlibdir*) # found a matching prefix func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" func_relative_path_tcancelled=$func_stripname_result if test -z "$func_relative_path_result"; then func_relative_path_result=. fi break ;; *) func_dirname $func_relative_path_tlibdir func_relative_path_tlibdir=${func_dirname_result} if test "x$func_relative_path_tlibdir" = x ; then # Have to descend all the way to the root! func_relative_path_result=../$func_relative_path_result func_relative_path_tcancelled=$func_relative_path_tbindir break fi func_relative_path_result=../$func_relative_path_result ;; esac done # Now calculate path; take care to avoid doubling-up slashes. func_stripname '' '/' "$func_relative_path_result" func_relative_path_result=$func_stripname_result func_stripname '/' '/' "$func_relative_path_tcancelled" if test "x$func_stripname_result" != x ; then func_relative_path_result=${func_relative_path_result}/${func_stripname_result} fi # Normalisation. If bindir is libdir, return empty string, # else relative path ending with a slash; either way, target # file name can be directly appended. if test ! -z "$func_relative_path_result"; then func_stripname './' '' "$func_relative_path_result/" func_relative_path_result=$func_stripname_result fi } # The name of this program: func_dirname_and_basename "$progpath" progname=$func_basename_result # Make sure we have an absolute path for reexecution: case $progpath in [\\/]*|[A-Za-z]:\\*) ;; *[\\/]*) progdir=$func_dirname_result progdir=`cd "$progdir" && pwd` progpath="$progdir/$progname" ;; *) save_IFS="$IFS" IFS=${PATH_SEPARATOR-:} for progdir in $PATH; do IFS="$save_IFS" test -x "$progdir/$progname" && break done IFS="$save_IFS" test -n "$progdir" || progdir=`pwd` progpath="$progdir/$progname" ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed="${SED}"' -e 1s/^X//' sed_quote_subst='s/\([`"$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution that turns a string into a regex matching for the # string literally. sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' # Sed substitution that converts a w32 file name or path # which contains forward slashes, into one that contains # (escaped) backslashes. A very naive implementation. lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' # Re-`\' parameter expansions in output of double_quote_subst that were # `\'-ed in input to the same. If an odd number of `\' preceded a '$' # in input to double_quote_subst, that '$' was protected from expansion. # Since each input `\' is now two `\'s, look for any number of runs of # four `\'s followed by two `\'s and then a '$'. `\' that '$'. bs='\\' bs2='\\\\' bs4='\\\\\\\\' dollar='\$' sed_double_backslash="\ s/$bs4/&\\ /g s/^$bs2$dollar/$bs&/ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g s/\n//g" # Standard options: opt_dry_run=false opt_help=false opt_quiet=false opt_verbose=false opt_warning=: # func_echo arg... # Echo program name prefixed message, along with the current mode # name if it has been set yet. func_echo () { $ECHO "$progname: ${opt_mode+$opt_mode: }$*" } # func_verbose arg... # Echo program name prefixed message in verbose mode only. func_verbose () { $opt_verbose && func_echo ${1+"$@"} # A bug in bash halts the script if the last line of a function # fails when set -e is in force, so we need another command to # work around that: : } # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "$*" } # func_error arg... # Echo program name prefixed message to standard error. func_error () { $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 } # func_warning arg... # Echo program name prefixed warning message to standard error. func_warning () { $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 # bash bug again: : } # func_fatal_error arg... # Echo program name prefixed message to standard error, and exit. func_fatal_error () { func_error ${1+"$@"} exit $EXIT_FAILURE } # func_fatal_help arg... # Echo program name prefixed message to standard error, followed by # a help hint, and exit. func_fatal_help () { func_error ${1+"$@"} func_fatal_error "$help" } help="Try \`$progname --help' for more information." ## default # func_grep expression filename # Check whether EXPRESSION matches any line of FILENAME, without output. func_grep () { $GREP "$1" "$2" >/dev/null 2>&1 } # func_mkdir_p directory-path # Make sure the entire path to DIRECTORY-PATH is available. func_mkdir_p () { my_directory_path="$1" my_dir_list= if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then # Protect directory names starting with `-' case $my_directory_path in -*) my_directory_path="./$my_directory_path" ;; esac # While some portion of DIR does not yet exist... while test ! -d "$my_directory_path"; do # ...make a list in topmost first order. Use a colon delimited # list incase some portion of path contains whitespace. my_dir_list="$my_directory_path:$my_dir_list" # If the last portion added has no slash in it, the list is done case $my_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` done my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` save_mkdir_p_IFS="$IFS"; IFS=':' for my_dir in $my_dir_list; do IFS="$save_mkdir_p_IFS" # mkdir can fail with a `File exist' error if two processes # try to create one of the directories concurrently. Don't # stop in that case! $MKDIR "$my_dir" 2>/dev/null || : done IFS="$save_mkdir_p_IFS" # Bail out if we (or some other process) failed to create a directory. test -d "$my_directory_path" || \ func_fatal_error "Failed to create \`$1'" fi } # func_mktempdir [string] # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If # given, STRING is the basename for that directory. func_mktempdir () { my_template="${TMPDIR-/tmp}/${1-$progname}" if test "$opt_dry_run" = ":"; then # Return a directory name, but don't create it in dry-run mode my_tmpdir="${my_template}-$$" else # If mktemp works, use that first and foremost my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` if test ! -d "$my_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race my_tmpdir="${my_template}-${RANDOM-0}$$" save_mktempdir_umask=`umask` umask 0077 $MKDIR "$my_tmpdir" umask $save_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure test -d "$my_tmpdir" || \ func_fatal_error "cannot create temporary directory \`$my_tmpdir'" fi $ECHO "$my_tmpdir" } # func_quote_for_eval arg # Aesthetically quote ARG to be evaled later. # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT # is double-quoted, suitable for a subsequent eval, whereas # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters # which are still active within double quotes backslashified. func_quote_for_eval () { case $1 in *[\\\`\"\$]*) func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; *) func_quote_for_eval_unquoted_result="$1" ;; esac case $func_quote_for_eval_unquoted_result in # Double-quote args containing shell metacharacters to delay # word splitting, command substitution and and variable # expansion for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" ;; *) func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" esac } # func_quote_for_expand arg # Aesthetically quote ARG to be evaled later; same as above, # but do not quote variable references. func_quote_for_expand () { case $1 in *[\\\`\"]*) my_arg=`$ECHO "$1" | $SED \ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; *) my_arg="$1" ;; esac case $my_arg in # Double-quote args containing shell metacharacters to delay # word splitting and command substitution for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") my_arg="\"$my_arg\"" ;; esac func_quote_for_expand_result="$my_arg" } # func_show_eval cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. func_show_eval () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$my_cmd" my_status=$? if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_show_eval_locale cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. Use the saved locale for evaluation. func_show_eval_locale () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$lt_user_locale $my_cmd" my_status=$? eval "$lt_safe_locale" if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_tr_sh # Turn $1 into a string suitable for a shell variable name. # Result is stored in $func_tr_sh_result. All characters # not in the set a-zA-Z0-9_ are replaced with '_'. Further, # if $1 begins with a digit, a '_' is prepended as well. func_tr_sh () { case $1 in [0-9]* | *[!a-zA-Z0-9_]*) func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` ;; * ) func_tr_sh_result=$1 ;; esac } # func_version # Echo version message to standard output and exit. func_version () { $opt_debug $SED -n '/(C)/!b go :more /\./!{ N s/\n# / / b more } :go /^# '$PROGRAM' (GNU /,/# warranty; / { s/^# // s/^# *$// s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ p }' < "$progpath" exit $? } # func_usage # Echo short help message to standard output and exit. func_usage () { $opt_debug $SED -n '/^# Usage:/,/^# *.*--help/ { s/^# // s/^# *$// s/\$progname/'$progname'/ p }' < "$progpath" echo $ECHO "run \`$progname --help | more' for full usage" exit $? } # func_help [NOEXIT] # Echo long help message to standard output and exit, # unless 'noexit' is passed as argument. func_help () { $opt_debug $SED -n '/^# Usage:/,/# Report bugs to/ { :print s/^# // s/^# *$// s*\$progname*'$progname'* s*\$host*'"$host"'* s*\$SHELL*'"$SHELL"'* s*\$LTCC*'"$LTCC"'* s*\$LTCFLAGS*'"$LTCFLAGS"'* s*\$LD*'"$LD"'* s/\$with_gnu_ld/'"$with_gnu_ld"'/ s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ p d } /^# .* home page:/b print /^# General help using/b print ' < "$progpath" ret=$? if test -z "$1"; then exit $ret fi } # func_missing_arg argname # Echo program name prefixed message to standard error and set global # exit_cmd. func_missing_arg () { $opt_debug func_error "missing argument for $1." exit_cmd=exit } # func_split_short_opt shortopt # Set func_split_short_opt_name and func_split_short_opt_arg shell # variables after splitting SHORTOPT after the 2nd character. func_split_short_opt () { my_sed_short_opt='1s/^\(..\).*$/\1/;q' my_sed_short_rest='1s/^..\(.*\)$/\1/;q' func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` } # func_split_short_opt may be replaced by extended shell implementation # func_split_long_opt longopt # Set func_split_long_opt_name and func_split_long_opt_arg shell # variables after splitting LONGOPT at the `=' sign. func_split_long_opt () { my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' my_sed_long_arg='1s/^--[^=]*=//' func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` } # func_split_long_opt may be replaced by extended shell implementation exit_cmd=: magic="%%%MAGIC variable%%%" magic_exe="%%%MAGIC EXE variable%%%" # Global variables. nonopt= preserve_args= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" extracted_archives= extracted_serial=0 # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. exec_cmd= # func_append var value # Append VALUE to the end of shell variable VAR. func_append () { eval "${1}=\$${1}\${2}" } # func_append may be replaced by extended shell implementation # func_append_quoted var value # Quote VALUE and append to the end of shell variable VAR, separated # by a space. func_append_quoted () { func_quote_for_eval "${2}" eval "${1}=\$${1}\\ \$func_quote_for_eval_result" } # func_append_quoted may be replaced by extended shell implementation # func_arith arithmetic-term... func_arith () { func_arith_result=`expr "${@}"` } # func_arith may be replaced by extended shell implementation # func_len string # STRING may not start with a hyphen. func_len () { func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` } # func_len may be replaced by extended shell implementation # func_lo2o object func_lo2o () { func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` } # func_lo2o may be replaced by extended shell implementation # func_xform libobj-or-source func_xform () { func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` } # func_xform may be replaced by extended shell implementation # func_fatal_configuration arg... # Echo program name prefixed message to standard error, followed by # a configuration failure hint, and exit. func_fatal_configuration () { func_error ${1+"$@"} func_error "See the $PACKAGE documentation for more information." func_fatal_error "Fatal configuration error." } # func_config # Display the configuration for all the tags in this script. func_config () { re_begincf='^# ### BEGIN LIBTOOL' re_endcf='^# ### END LIBTOOL' # Default configuration. $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" # Now print the configurations for the tags. for tagname in $taglist; do $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" done exit $? } # func_features # Display the features supported by this script. func_features () { echo "host: $host" if test "$build_libtool_libs" = yes; then echo "enable shared libraries" else echo "disable shared libraries" fi if test "$build_old_libs" = yes; then echo "enable static libraries" else echo "disable static libraries" fi exit $? } # func_enable_tag tagname # Verify that TAGNAME is valid, and either flag an error and exit, or # enable the TAGNAME tag. We also add TAGNAME to the global $taglist # variable here. func_enable_tag () { # Global variable: tagname="$1" re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" sed_extractcf="/$re_begincf/,/$re_endcf/p" # Validate tagname. case $tagname in *[!-_A-Za-z0-9,/]*) func_fatal_error "invalid tag name: $tagname" ;; esac # Don't test for the "default" C tag, as we know it's # there but not specially marked. case $tagname in CC) ;; *) if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then taglist="$taglist $tagname" # Evaluate the configuration. Be careful to quote the path # and the sed script, to avoid splitting on whitespace, but # also don't use non-portable quotes within backquotes within # quotes we have to do it in 2 steps: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` eval "$extractedcf" else func_error "ignoring unknown tag $tagname" fi ;; esac } # func_check_version_match # Ensure that we are using m4 macros, and libtool script from the same # release of libtool. func_check_version_match () { if test "$package_revision" != "$macro_revision"; then if test "$VERSION" != "$macro_version"; then if test -z "$macro_version"; then cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from an older release. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from $PACKAGE $macro_version. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF fi else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, $progname: but the definition of this LT_INIT comes from revision $macro_revision. $progname: You should recreate aclocal.m4 with macros from revision $package_revision $progname: of $PACKAGE $VERSION and run autoconf again. _LT_EOF fi exit $EXIT_MISMATCH fi } # Shorthand for --mode=foo, only valid as the first argument case $1 in clean|clea|cle|cl) shift; set dummy --mode clean ${1+"$@"}; shift ;; compile|compil|compi|comp|com|co|c) shift; set dummy --mode compile ${1+"$@"}; shift ;; execute|execut|execu|exec|exe|ex|e) shift; set dummy --mode execute ${1+"$@"}; shift ;; finish|finis|fini|fin|fi|f) shift; set dummy --mode finish ${1+"$@"}; shift ;; install|instal|insta|inst|ins|in|i) shift; set dummy --mode install ${1+"$@"}; shift ;; link|lin|li|l) shift; set dummy --mode link ${1+"$@"}; shift ;; uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) shift; set dummy --mode uninstall ${1+"$@"}; shift ;; esac # Option defaults: opt_debug=: opt_dry_run=false opt_config=false opt_preserve_dup_deps=false opt_features=false opt_finish=false opt_help=false opt_help_all=false opt_silent=: opt_warning=: opt_verbose=: opt_silent=false opt_verbose=false # Parse options once, thoroughly. This comes as soon as possible in the # script to make things like `--version' happen as quickly as we can. { # this just eases exit handling while test $# -gt 0; do opt="$1" shift case $opt in --debug|-x) opt_debug='set -x' func_echo "enabling shell trace mode" $opt_debug ;; --dry-run|--dryrun|-n) opt_dry_run=: ;; --config) opt_config=: func_config ;; --dlopen|-dlopen) optarg="$1" opt_dlopen="${opt_dlopen+$opt_dlopen }$optarg" shift ;; --preserve-dup-deps) opt_preserve_dup_deps=: ;; --features) opt_features=: func_features ;; --finish) opt_finish=: set dummy --mode finish ${1+"$@"}; shift ;; --help) opt_help=: ;; --help-all) opt_help_all=: opt_help=': help-all' ;; --mode) test $# = 0 && func_missing_arg $opt && break optarg="$1" opt_mode="$optarg" case $optarg in # Valid mode arguments: clean|compile|execute|finish|install|link|relink|uninstall) ;; # Catch anything else as an error *) func_error "invalid argument for $opt" exit_cmd=exit break ;; esac shift ;; --no-silent|--no-quiet) opt_silent=false func_append preserve_args " $opt" ;; --no-warning|--no-warn) opt_warning=false func_append preserve_args " $opt" ;; --no-verbose) opt_verbose=false func_append preserve_args " $opt" ;; --silent|--quiet) opt_silent=: func_append preserve_args " $opt" opt_verbose=false ;; --verbose|-v) opt_verbose=: func_append preserve_args " $opt" opt_silent=false ;; --tag) test $# = 0 && func_missing_arg $opt && break optarg="$1" opt_tag="$optarg" func_append preserve_args " $opt $optarg" func_enable_tag "$optarg" shift ;; -\?|-h) func_usage ;; --help) func_help ;; --version) func_version ;; # Separate optargs to long options: --*=*) func_split_long_opt "$opt" set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} shift ;; # Separate non-argument short options: -\?*|-h*|-n*|-v*) func_split_short_opt "$opt" set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} shift ;; --) break ;; -*) func_fatal_help "unrecognized option \`$opt'" ;; *) set dummy "$opt" ${1+"$@"}; shift; break ;; esac done # Validate options: # save first non-option argument if test "$#" -gt 0; then nonopt="$opt" shift fi # preserve --debug test "$opt_debug" = : || func_append preserve_args " --debug" case $host in *cygwin* | *mingw* | *pw32* | *cegcc*) # don't eliminate duplications in $postdeps and $predeps opt_duplicate_compiler_generated_deps=: ;; *) opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps ;; esac $opt_help || { # Sanity checks first: func_check_version_match if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then func_fatal_configuration "not configured to build any kind of library" fi # Darwin sucks eval std_shrext=\"$shrext_cmds\" # Only execute mode is allowed to have -dlopen flags. if test -n "$opt_dlopen" && test "$opt_mode" != execute; then func_error "unrecognized option \`-dlopen'" $ECHO "$help" 1>&2 exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help="$help" help="Try \`$progname --help --mode=$opt_mode' for more information." } # Bail if the options were screwed $exit_cmd $EXIT_FAILURE } ## ----------- ## ## Main. ## ## ----------- ## # func_lalib_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_lalib_p () { test -f "$1" && $SED -e 4q "$1" 2>/dev/null \ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 } # func_lalib_unsafe_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function implements the same check as func_lalib_p without # resorting to external programs. To this end, it redirects stdin and # closes it afterwards, without saving the original file descriptor. # As a safety measure, use it only where a negative result would be # fatal anyway. Works if `file' does not exist. func_lalib_unsafe_p () { lalib_p=no if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then for lalib_p_l in 1 2 3 4 do read lalib_p_line case "$lalib_p_line" in \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; esac done exec 0<&5 5<&- fi test "$lalib_p" = yes } # func_ltwrapper_script_p file # True iff FILE is a libtool wrapper script # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_script_p () { func_lalib_p "$1" } # func_ltwrapper_executable_p file # True iff FILE is a libtool wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_executable_p () { func_ltwrapper_exec_suffix= case $1 in *.exe) ;; *) func_ltwrapper_exec_suffix=.exe ;; esac $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 } # func_ltwrapper_scriptname file # Assumes file is an ltwrapper_executable # uses $file to determine the appropriate filename for a # temporary ltwrapper_script. func_ltwrapper_scriptname () { func_dirname_and_basename "$1" "" "." func_stripname '' '.exe' "$func_basename_result" func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" } # func_ltwrapper_p file # True iff FILE is a libtool wrapper script or wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_p () { func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" } # func_execute_cmds commands fail_cmd # Execute tilde-delimited COMMANDS. # If FAIL_CMD is given, eval that upon failure. # FAIL_CMD may read-access the current command in variable CMD! func_execute_cmds () { $opt_debug save_ifs=$IFS; IFS='~' for cmd in $1; do IFS=$save_ifs eval cmd=\"$cmd\" func_show_eval "$cmd" "${2-:}" done IFS=$save_ifs } # func_source file # Source FILE, adding directory component if necessary. # Note that it is not necessary on cygwin/mingw to append a dot to # FILE even if both FILE and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # `FILE.' does not work on cygwin managed mounts. func_source () { $opt_debug case $1 in */* | *\\*) . "$1" ;; *) . "./$1" ;; esac } # func_resolve_sysroot PATH # Replace a leading = in PATH with a sysroot. Store the result into # func_resolve_sysroot_result func_resolve_sysroot () { func_resolve_sysroot_result=$1 case $func_resolve_sysroot_result in =*) func_stripname '=' '' "$func_resolve_sysroot_result" func_resolve_sysroot_result=$lt_sysroot$func_stripname_result ;; esac } # func_replace_sysroot PATH # If PATH begins with the sysroot, replace it with = and # store the result into func_replace_sysroot_result. func_replace_sysroot () { case "$lt_sysroot:$1" in ?*:"$lt_sysroot"*) func_stripname "$lt_sysroot" '' "$1" func_replace_sysroot_result="=$func_stripname_result" ;; *) # Including no sysroot. func_replace_sysroot_result=$1 ;; esac } # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. # Only attempt this if the compiler in the base compile # command doesn't match the default compiler. # arg is usually of the form 'gcc ...' func_infer_tag () { $opt_debug if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) for z in $available_tags; do if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case "$@ " in " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. tagname=$z break ;; esac fi done # If $tagname still isn't set, then no tagged configuration # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then func_echo "unable to infer tagged configuration" func_fatal_error "specify a tag with \`--tag'" # else # func_verbose "using $tagname tagged configuration" fi ;; esac fi } # func_write_libtool_object output_name pic_name nonpic_name # Create a libtool object file (analogous to a ".la" file), # but don't create it if we're doing a dry run. func_write_libtool_object () { write_libobj=${1} if test "$build_libtool_libs" = yes; then write_lobj=\'${2}\' else write_lobj=none fi if test "$build_old_libs" = yes; then write_oldobj=\'${3}\' else write_oldobj=none fi $opt_dry_run || { cat >${write_libobj}T </dev/null` if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | $SED -e "$lt_sed_naive_backslashify"` else func_convert_core_file_wine_to_w32_result= fi fi } # end: func_convert_core_file_wine_to_w32 # func_convert_core_path_wine_to_w32 ARG # Helper function used by path conversion functions when $build is *nix, and # $host is mingw, cygwin, or some other w32 environment. Relies on a correctly # configured wine environment available, with the winepath program in $build's # $PATH. Assumes ARG has no leading or trailing path separator characters. # # ARG is path to be converted from $build format to win32. # Result is available in $func_convert_core_path_wine_to_w32_result. # Unconvertible file (directory) names in ARG are skipped; if no directory names # are convertible, then the result may be empty. func_convert_core_path_wine_to_w32 () { $opt_debug # unfortunately, winepath doesn't convert paths, only file names func_convert_core_path_wine_to_w32_result="" if test -n "$1"; then oldIFS=$IFS IFS=: for func_convert_core_path_wine_to_w32_f in $1; do IFS=$oldIFS func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" if test -n "$func_convert_core_file_wine_to_w32_result" ; then if test -z "$func_convert_core_path_wine_to_w32_result"; then func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" else func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" fi fi done IFS=$oldIFS fi } # end: func_convert_core_path_wine_to_w32 # func_cygpath ARGS... # Wrapper around calling the cygpath program via LT_CYGPATH. This is used when # when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) # $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or # (2), returns the Cygwin file name or path in func_cygpath_result (input # file name or path is assumed to be in w32 format, as previously converted # from $build's *nix or MSYS format). In case (3), returns the w32 file name # or path in func_cygpath_result (input file name or path is assumed to be in # Cygwin format). Returns an empty string on error. # # ARGS are passed to cygpath, with the last one being the file name or path to # be converted. # # Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH # environment variable; do not put it in $PATH. func_cygpath () { $opt_debug if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` if test "$?" -ne 0; then # on failure, ensure result is empty func_cygpath_result= fi else func_cygpath_result= func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" fi } #end: func_cygpath # func_convert_core_msys_to_w32 ARG # Convert file name or path ARG from MSYS format to w32 format. Return # result in func_convert_core_msys_to_w32_result. func_convert_core_msys_to_w32 () { $opt_debug # awkward: cmd appends spaces to result func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` } #end: func_convert_core_msys_to_w32 # func_convert_file_check ARG1 ARG2 # Verify that ARG1 (a file name in $build format) was converted to $host # format in ARG2. Otherwise, emit an error message, but continue (resetting # func_to_host_file_result to ARG1). func_convert_file_check () { $opt_debug if test -z "$2" && test -n "$1" ; then func_error "Could not determine host file name corresponding to" func_error " \`$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback: func_to_host_file_result="$1" fi } # end func_convert_file_check # func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH # Verify that FROM_PATH (a path in $build format) was converted to $host # format in TO_PATH. Otherwise, emit an error message, but continue, resetting # func_to_host_file_result to a simplistic fallback value (see below). func_convert_path_check () { $opt_debug if test -z "$4" && test -n "$3"; then func_error "Could not determine the host path corresponding to" func_error " \`$3'" func_error "Continuing, but uninstalled executables may not work." # Fallback. This is a deliberately simplistic "conversion" and # should not be "improved". See libtool.info. if test "x$1" != "x$2"; then lt_replace_pathsep_chars="s|$1|$2|g" func_to_host_path_result=`echo "$3" | $SED -e "$lt_replace_pathsep_chars"` else func_to_host_path_result="$3" fi fi } # end func_convert_path_check # func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG # Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT # and appending REPL if ORIG matches BACKPAT. func_convert_path_front_back_pathsep () { $opt_debug case $4 in $1 ) func_to_host_path_result="$3$func_to_host_path_result" ;; esac case $4 in $2 ) func_append func_to_host_path_result "$3" ;; esac } # end func_convert_path_front_back_pathsep ################################################## # $build to $host FILE NAME CONVERSION FUNCTIONS # ################################################## # invoked via `$to_host_file_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # Result will be available in $func_to_host_file_result. # func_to_host_file ARG # Converts the file name ARG from $build format to $host format. Return result # in func_to_host_file_result. func_to_host_file () { $opt_debug $to_host_file_cmd "$1" } # end func_to_host_file # func_to_tool_file ARG LAZY # converts the file name ARG from $build format to toolchain format. Return # result in func_to_tool_file_result. If the conversion in use is listed # in (the comma separated) LAZY, no conversion takes place. func_to_tool_file () { $opt_debug case ,$2, in *,"$to_tool_file_cmd",*) func_to_tool_file_result=$1 ;; *) $to_tool_file_cmd "$1" func_to_tool_file_result=$func_to_host_file_result ;; esac } # end func_to_tool_file # func_convert_file_noop ARG # Copy ARG to func_to_host_file_result. func_convert_file_noop () { func_to_host_file_result="$1" } # end func_convert_file_noop # func_convert_file_msys_to_w32 ARG # Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_file_result. func_convert_file_msys_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_to_host_file_result="$func_convert_core_msys_to_w32_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_w32 # func_convert_file_cygwin_to_w32 ARG # Convert file name ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_file_cygwin_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then # because $build is cygwin, we call "the" cygpath in $PATH; no need to use # LT_CYGPATH in this case. func_to_host_file_result=`cygpath -m "$1"` fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_cygwin_to_w32 # func_convert_file_nix_to_w32 ARG # Convert file name ARG from *nix to w32 format. Requires a wine environment # and a working winepath. Returns result in func_to_host_file_result. func_convert_file_nix_to_w32 () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_file_wine_to_w32 "$1" func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_w32 # func_convert_file_msys_to_cygwin ARG # Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_file_msys_to_cygwin () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_cygpath -u "$func_convert_core_msys_to_w32_result" func_to_host_file_result="$func_cygpath_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_cygwin # func_convert_file_nix_to_cygwin ARG # Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed # in a wine environment, working winepath, and LT_CYGPATH set. Returns result # in func_to_host_file_result. func_convert_file_nix_to_cygwin () { $opt_debug func_to_host_file_result="$1" if test -n "$1"; then # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. func_convert_core_file_wine_to_w32 "$1" func_cygpath -u "$func_convert_core_file_wine_to_w32_result" func_to_host_file_result="$func_cygpath_result" fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_cygwin ############################################# # $build to $host PATH CONVERSION FUNCTIONS # ############################################# # invoked via `$to_host_path_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # The result will be available in $func_to_host_path_result. # # Path separators are also converted from $build format to $host format. If # ARG begins or ends with a path separator character, it is preserved (but # converted to $host format) on output. # # All path conversion functions are named using the following convention: # file name conversion function : func_convert_file_X_to_Y () # path conversion function : func_convert_path_X_to_Y () # where, for any given $build/$host combination the 'X_to_Y' value is the # same. If conversion functions are added for new $build/$host combinations, # the two new functions must follow this pattern, or func_init_to_host_path_cmd # will break. # func_init_to_host_path_cmd # Ensures that function "pointer" variable $to_host_path_cmd is set to the # appropriate value, based on the value of $to_host_file_cmd. to_host_path_cmd= func_init_to_host_path_cmd () { $opt_debug if test -z "$to_host_path_cmd"; then func_stripname 'func_convert_file_' '' "$to_host_file_cmd" to_host_path_cmd="func_convert_path_${func_stripname_result}" fi } # func_to_host_path ARG # Converts the path ARG from $build format to $host format. Return result # in func_to_host_path_result. func_to_host_path () { $opt_debug func_init_to_host_path_cmd $to_host_path_cmd "$1" } # end func_to_host_path # func_convert_path_noop ARG # Copy ARG to func_to_host_path_result. func_convert_path_noop () { func_to_host_path_result="$1" } # end func_convert_path_noop # func_convert_path_msys_to_w32 ARG # Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_path_result. func_convert_path_msys_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # Remove leading and trailing path separator characters from ARG. MSYS # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; # and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result="$func_convert_core_msys_to_w32_result" func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_msys_to_w32 # func_convert_path_cygwin_to_w32 ARG # Convert path ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_path_cygwin_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_cygwin_to_w32 # func_convert_path_nix_to_w32 ARG # Convert path ARG from *nix to w32 format. Requires a wine environment and # a working winepath. Returns result in func_to_host_file_result. func_convert_path_nix_to_w32 () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_nix_to_w32 # func_convert_path_msys_to_cygwin ARG # Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_path_msys_to_cygwin () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_msys_to_w32_result" func_to_host_path_result="$func_cygpath_result" func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_msys_to_cygwin # func_convert_path_nix_to_cygwin ARG # Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a # a wine environment, working winepath, and LT_CYGPATH set. Returns result in # func_to_host_file_result. func_convert_path_nix_to_cygwin () { $opt_debug func_to_host_path_result="$1" if test -n "$1"; then # Remove leading and trailing path separator characters from # ARG. msys behavior is inconsistent here, cygpath turns them # into '.;' and ';.', and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" func_to_host_path_result="$func_cygpath_result" func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_nix_to_cygwin # func_mode_compile arg... func_mode_compile () { $opt_debug # Get the compilation command and the source file. base_compile= srcfile="$nonopt" # always keep a non-empty value in "srcfile" suppress_opt=yes suppress_output= arg_mode=normal libobj= later= pie_flag= for arg do case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile lastarg="$arg" arg_mode=normal ;; target ) libobj="$arg" arg_mode=normal continue ;; normal ) # Accept any command-line options. case $arg in -o) test -n "$libobj" && \ func_fatal_error "you cannot specify \`-o' more than once" arg_mode=target continue ;; -pie | -fpie | -fPIE) func_append pie_flag " $arg" continue ;; -shared | -static | -prefer-pic | -prefer-non-pic) func_append later " $arg" continue ;; -no-suppress) suppress_opt=no continue ;; -Xcompiler) arg_mode=arg # the next one goes into the "base_compile" arg list continue # The current "srcfile" will either be retained or ;; # replaced later. I would guess that would be a bug. -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result lastarg= save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" func_append_quoted lastarg "$arg" done IFS="$save_ifs" func_stripname ' ' '' "$lastarg" lastarg=$func_stripname_result # Add the arguments to base_compile. func_append base_compile " $lastarg" continue ;; *) # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # lastarg="$srcfile" srcfile="$arg" ;; esac # case $arg ;; esac # case $arg_mode # Aesthetically quote the previous argument. func_append_quoted base_compile "$lastarg" done # for arg case $arg_mode in arg) func_fatal_error "you must specify an argument for -Xcompile" ;; target) func_fatal_error "you must specify a target with \`-o'" ;; *) # Get the name of the library object. test -z "$libobj" && { func_basename "$srcfile" libobj="$func_basename_result" } ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo case $libobj in *.[cCFSifmso] | \ *.ada | *.adb | *.ads | *.asm | \ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) func_xform "$libobj" libobj=$func_xform_result ;; esac case $libobj in *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; *) func_fatal_error "cannot determine name of library object from \`$libobj'" ;; esac func_infer_tag $base_compile for arg in $later; do case $arg in -shared) test "$build_libtool_libs" != yes && \ func_fatal_configuration "can not build a shared library" build_old_libs=no continue ;; -static) build_libtool_libs=no build_old_libs=yes continue ;; -prefer-pic) pic_mode=yes continue ;; -prefer-non-pic) pic_mode=no continue ;; esac done func_quote_for_eval "$libobj" test "X$libobj" != "X$func_quote_for_eval_result" \ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ && func_warning "libobj name \`$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" objname="$func_basename_result" xdir="$func_dirname_result" lobj=${xdir}$objdir/$objname test -z "$base_compile" && \ func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. if test "$build_old_libs" = yes; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" fi # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | pw32* | os2* | cegcc*) pic_mode=default ;; esac if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" else output_obj= need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then $ECHO "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi func_append removelist " $output_obj" $ECHO "$srcfile" > "$lockfile" fi $opt_dry_run || $RM $removelist func_append removelist " $lockfile" trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 srcfile=$func_to_tool_file_result func_quote_for_eval "$srcfile" qsrcfile=$func_quote_for_eval_result # Only build a PIC object if we are building libtool libraries. if test "$build_libtool_libs" = yes; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile if test "$pic_mode" != no; then command="$base_compile $qsrcfile $pic_flag" else # Don't build PIC code command="$base_compile $qsrcfile" fi func_mkdir_p "$xdir$objdir" if test -z "$output_obj"; then # Place PIC objects in $objdir func_append command " -o $lobj" fi func_show_eval_locale "$command" \ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then func_show_eval '$MV "$output_obj" "$lobj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi # Allow error messages only from the first compilation. if test "$suppress_opt" = yes; then suppress_output=' >/dev/null 2>&1' fi fi # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then if test "$pic_mode" != yes; then # Don't build PIC code command="$base_compile $qsrcfile$pie_flag" else command="$base_compile $qsrcfile $pic_flag" fi if test "$compiler_c_o" = yes; then func_append command " -o $obj" fi # Suppress compiler output if we already did a PIC compilation. func_append command "$suppress_output" func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then func_show_eval '$MV "$output_obj" "$obj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi fi $opt_dry_run || { func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" # Unlock the critical section if it was locked if test "$need_locks" != no; then removelist=$lockfile $RM "$lockfile" fi } exit $EXIT_SUCCESS } $opt_help || { test "$opt_mode" = compile && func_mode_compile ${1+"$@"} } func_mode_help () { # We need to display help for each of the modes. case $opt_mode in "") # Generic help is extracted from the usage comments # at the start of this file. func_help ;; clean) $ECHO \ "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $ECHO \ "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -no-suppress do not suppress compiler output for multiple passes -prefer-pic try to build PIC objects only -prefer-non-pic try to build non-PIC objects only -shared do not build a \`.o' file suitable for static linking -static only build a \`.o' file suitable for static linking -Wc,FLAG pass FLAG directly to the compiler COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix \`.c' with the library object suffix, \`.lo'." ;; execute) $ECHO \ "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to \`-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $ECHO \ "Usage: $progname [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the \`--dry-run' option if you just want to see what would be executed." ;; install) $ECHO \ "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the \`install' or \`cp' program. The following components of INSTALL-COMMAND are treated specially: -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $ECHO \ "Usage: $progname [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -bindir BINDIR specify path to binaries directory (for systems where libraries must be found in the PATH setting at runtime) -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -objectlist FILE Use a list of object files found in FILE to specify objects -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -shared only do dynamic linking of libtool libraries -shrext SUFFIX override the standard shared library file extension -static do not do any dynamic linking of uninstalled libtool libraries -static-libtool-libs do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] -weak LIBNAME declare that the target provides the LIBNAME interface -Wc,FLAG -Xcompiler FLAG pass linker-specific FLAG directly to the compiler -Wl,FLAG -Xlinker FLAG pass linker-specific FLAG directly to the linker -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) All other options (arguments beginning with \`-') are ignored. Every other argument is treated as a filename. Files ending in \`.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only library objects (\`.lo' files) may be specified, and \`-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created using \`ar' and \`ranlib', or on Windows using \`lib'. If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $ECHO \ "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) func_fatal_help "invalid operation mode \`$opt_mode'" ;; esac echo $ECHO "Try \`$progname --help' for more information about other modes." } # Now that we've collected a possible --mode arg, show help if necessary if $opt_help; then if test "$opt_help" = :; then func_mode_help else { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do func_mode_help done } | sed -n '1p; 2,$s/^Usage:/ or: /p' { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do echo func_mode_help done } | sed '1d /^When reporting/,/^Report/{ H d } $x /information about other modes/d /more detailed .*MODE/d s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' fi exit $? fi # func_mode_execute arg... func_mode_execute () { $opt_debug # The first argument is the command name. cmd="$nonopt" test -z "$cmd" && \ func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. for file in $opt_dlopen; do test -f "$file" \ || func_fatal_help "\`$file' is not a file" dir= case $file in *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$lib' is not a valid libtool archive" # Read the libtool library. dlname= library_names= func_source "$file" # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && \ func_warning "\`$file' was not linked with \`-export-dynamic'" continue fi func_dirname "$file" "" "." dir="$func_dirname_result" if test -f "$dir/$objdir/$dlname"; then func_append dir "/$objdir" else if test ! -f "$dir/$dlname"; then func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" fi fi ;; *.lo) # Just add the directory containing the .lo file. func_dirname "$file" "" "." dir="$func_dirname_result" ;; *) func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir="$absdir" # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic="$magic" # Check if any of the arguments is a wrapper script. args= for file do case $file in -* | *.la | *.lo ) ;; *) # Do a test to see if this is really a libtool program. if func_ltwrapper_script_p "$file"; then func_source "$file" # Transform arg to wrapped name. file="$progdir/$program" elif func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" func_source "$func_ltwrapper_scriptname_result" # Transform arg to wrapped name. file="$progdir/$program" fi ;; esac # Quote arguments (to preserve shell metacharacters). func_append_quoted args "$file" done if test "X$opt_dry_run" = Xfalse; then if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved environment variables for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${save_$lt_var+set}\" = set; then $lt_var=\$save_$lt_var; export $lt_var else $lt_unset $lt_var fi" done # Now prepare to actually exec the command. exec_cmd="\$cmd$args" else # Display what would be done. if test -n "$shlibpath_var"; then eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" echo "export $shlibpath_var" fi $ECHO "$cmd$args" exit $EXIT_SUCCESS fi } test "$opt_mode" = execute && func_mode_execute ${1+"$@"} # func_mode_finish arg... func_mode_finish () { $opt_debug libs= libdirs= admincmds= for opt in "$nonopt" ${1+"$@"} do if test -d "$opt"; then func_append libdirs " $opt" elif test -f "$opt"; then if func_lalib_unsafe_p "$opt"; then func_append libs " $opt" else func_warning "\`$opt' is not a valid libtool archive" fi else func_fatal_error "invalid argument \`$opt'" fi done if test -n "$libs"; then if test -n "$lt_sysroot"; then sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" else sysroot_cmd= fi # Remove sysroot references if $opt_dry_run; then for lib in $libs; do echo "removing references to $lt_sysroot and \`=' prefixes from $lib" done else tmpdir=`func_mktempdir` for lib in $libs; do sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ > $tmpdir/tmp-la mv -f $tmpdir/tmp-la $lib done ${RM}r "$tmpdir" fi fi if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. func_execute_cmds "$finish_cmds" 'admincmds="$admincmds '"$cmd"'"' fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $opt_dry_run || eval "$cmds" || func_append admincmds " $cmds" fi done fi # Exit here if they wanted silent mode. $opt_silent && exit $EXIT_SUCCESS if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then echo "----------------------------------------------------------------------" echo "Libraries have been installed in:" for libdir in $libdirs; do $ECHO " $libdir" done echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" echo "specify the full pathname of the library, or use the \`-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then echo " - add LIBDIR to the \`$shlibpath_var' environment variable" echo " during execution" fi if test -n "$runpath_var"; then echo " - add LIBDIR to the \`$runpath_var' environment variable" echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" $ECHO " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then $ECHO " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi echo echo "See any operating system documentation about shared libraries for" case $host in solaris2.[6789]|solaris2.1[0-9]) echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" echo "pages." ;; *) echo "more information, such as the ld(1) and ld.so(8) manual pages." ;; esac echo "----------------------------------------------------------------------" fi exit $EXIT_SUCCESS } test "$opt_mode" = finish && func_mode_finish ${1+"$@"} # func_mode_install arg... func_mode_install () { $opt_debug # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. case $nonopt in *shtool*) :;; *) false;; esac; then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " arg=$1 shift else install_prog= arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. func_quote_for_eval "$arg" func_append install_prog "$func_quote_for_eval_result" install_shared_prog=$install_prog case " $install_prog " in *[\\\ /]cp\ *) install_cp=: ;; *) install_cp=false ;; esac # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=no stripme= no_mode=: for arg do arg2= if test -n "$dest"; then func_append files " $dest" dest=$arg continue fi case $arg in -d) isdir=yes ;; -f) if $install_cp; then :; else prev=$arg fi ;; -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then if test "x$prev" = x-m && test -n "$install_override_mode"; then arg2=$install_override_mode no_mode=false fi prev= else dest=$arg continue fi ;; esac # Aesthetically quote the argument. func_quote_for_eval "$arg" func_append install_prog " $func_quote_for_eval_result" if test -n "$arg2"; then func_quote_for_eval "$arg2" fi func_append install_shared_prog " $func_quote_for_eval_result" done test -z "$install_prog" && \ func_fatal_help "you must specify an install program" test -n "$prev" && \ func_fatal_help "the \`$prev' option requires an argument" if test -n "$install_override_mode" && $no_mode; then if $install_cp; then :; else func_quote_for_eval "$install_override_mode" func_append install_shared_prog " -m $func_quote_for_eval_result" fi fi if test -z "$files"; then if test -z "$dest"; then func_fatal_help "no file or destination specified" else func_fatal_help "you must specify a destination" fi fi # Strip any trailing slash from the destination. func_stripname '' '/' "$dest" dest=$func_stripname_result # Check to see that the destination is a directory. test -d "$dest" && isdir=yes if test "$isdir" = yes; then destdir="$dest" destname= else func_dirname_and_basename "$dest" "" "." destdir="$func_dirname_result" destname="$func_basename_result" # Not a directory, so check to see that there is only one file specified. set dummy $files; shift test "$#" -gt 1 && \ func_fatal_help "\`$dest' is not a directory" fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) func_fatal_help "\`$destdir' must be an absolute directory name" ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. func_append staticlibs " $file" ;; *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$file' is not a valid libtool archive" library_names= old_library= relink_command= func_source "$file" # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) func_append current_libdirs " $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) func_append future_libdirs " $libdir" ;; esac fi func_dirname "$file" "/" "" dir="$func_dirname_result" func_append dir "$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that # are installed to the same prefix. # At present, this check doesn't affect windows .dll's that # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. test "$inst_prefix_dir" = "$destdir" && \ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` fi func_warning "relinking \`$file'" func_show_eval "$relink_command" \ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' fi # See the names of the shared library. set dummy $library_names; shift if test -n "$1"; then realname="$1" shift srcname="$realname" test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ 'exit $?' tstripme="$stripme" case $host_os in cygwin* | mingw* | pw32* | cegcc*) case $realname in *.dll.a) tstripme="" ;; esac ;; esac if test -n "$tstripme" && test -n "$striplib"; then func_show_eval "$striplib $destdir/$realname" 'exit $?' fi if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. # Try `ln -sf' first, because the `ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname do test "$linkname" != "$realname" \ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" done fi # Do each command in the postinstall commands. lib="$destdir/$realname" func_execute_cmds "$postinstall_cmds" 'exit $?' fi # Install the pseudo-library for information purposes. func_basename "$file" name="$func_basename_result" instname="$dir/$name"i func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. test -n "$old_library" && func_append staticlibs " $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) func_lo2o "$destfile" staticdest=$func_lo2o_result ;; *.$objext) staticdest="$destfile" destfile= ;; *) func_fatal_help "cannot copy a libtool object to \`$destfile'" ;; esac # Install the libtool object if requested. test -n "$destfile" && \ func_show_eval "$install_prog $file $destfile" 'exit $?' # Install the old object if enabled. if test "$build_old_libs" = yes; then # Deduce the name of the old-style object file. func_lo2o "$file" staticobj=$func_lo2o_result func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' fi exit $EXIT_SUCCESS ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install stripped_ext="" case $file in *.exe) if test ! -f "$file"; then func_stripname '' '.exe' "$file" file=$func_stripname_result stripped_ext=".exe" fi ;; esac # Do a test to see if this is really a libtool program. case $host in *cygwin* | *mingw*) if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" wrapper=$func_ltwrapper_scriptname_result else func_stripname '' '.exe' "$file" wrapper=$func_stripname_result fi ;; *) wrapper=$file ;; esac if func_ltwrapper_script_p "$wrapper"; then notinst_deplibs= relink_command= func_source "$wrapper" # Check the variables that should have been set. test -z "$generated_by_libtool_version" && \ func_fatal_error "invalid libtool wrapper script \`$wrapper'" finalize=yes for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then func_source "$lib" fi libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then func_warning "\`$lib' has not been installed in \`$libdir'" finalize=no fi done relink_command= func_source "$wrapper" outputname= if test "$fast_install" = no && test -n "$relink_command"; then $opt_dry_run || { if test "$finalize" = yes; then tmpdir=`func_mktempdir` func_basename "$file$stripped_ext" file="$func_basename_result" outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` $opt_silent || { func_quote_for_expand "$relink_command" eval "func_echo $func_quote_for_expand_result" } if eval "$relink_command"; then : else func_error "error: relink \`$file' with the above command before installing it" $opt_dry_run || ${RM}r "$tmpdir" continue fi file="$outputname" else func_warning "cannot relink \`$file'" fi } else # Install the binary that we compiled earlier. file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyway case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) func_stripname '' '.exe' "$destfile" destfile=$func_stripname_result ;; esac ;; esac func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' $opt_dry_run || if test -n "$outputname"; then ${RM}r "$tmpdir" fi ;; esac done for file in $staticlibs; do func_basename "$file" name="$func_basename_result" # Set up the ranlib parameters. oldlib="$destdir/$name" func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 tool_oldlib=$func_to_tool_file_result func_show_eval "$install_prog \$file \$oldlib" 'exit $?' if test -n "$stripme" && test -n "$old_striplib"; then func_show_eval "$old_striplib $tool_oldlib" 'exit $?' fi # Do each command in the postinstall commands. func_execute_cmds "$old_postinstall_cmds" 'exit $?' done test -n "$future_libdirs" && \ func_warning "remember to run \`$progname --finish$future_libdirs'" if test -n "$current_libdirs"; then # Maybe just do a dry run. $opt_dry_run && current_libdirs=" -n$current_libdirs" exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi } test "$opt_mode" = install && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p # Extract symbols from dlprefiles and create ${outputname}S.o with # a dlpreopen symbol table. func_generate_dlsyms () { $opt_debug my_outputname="$1" my_originator="$2" my_pic_p="${3-no}" my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` my_dlsyms= if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then if test -n "$NM" && test -n "$global_symbol_pipe"; then my_dlsyms="${my_outputname}S.c" else func_error "not configured to extract global symbols from dlpreopened files" fi fi if test -n "$my_dlsyms"; then case $my_dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist="$output_objdir/${my_outputname}.nm" func_show_eval "$RM $nlist ${nlist}S ${nlist}T" # Parse the name list into a source file. func_verbose "creating $output_objdir/$my_dlsyms" $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ #ifdef __cplusplus extern \"C\" { #endif #if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) #pragma GCC diagnostic ignored \"-Wstrict-prototypes\" #endif /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif /* External symbol declarations for the compiler. */\ " if test "$dlself" = yes; then func_verbose "generating symbol list for \`$output'" $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` for progfile in $progfiles; do func_to_tool_file "$progfile" func_convert_file_msys_to_w32 func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $opt_dry_run || { eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi if test -n "$export_symbols_regex"; then $opt_dry_run || { eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols="$output_objdir/$outputname.exp" $opt_dry_run || { $RM $export_symbols eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ;; esac } else $opt_dry_run || { eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; esac } fi fi for dlprefile in $dlprefiles; do func_verbose "extracting global C symbols from \`$dlprefile'" func_basename "$dlprefile" name="$func_basename_result" case $host in *cygwin* | *mingw* | *cegcc* ) # if an import library, we need to obtain dlname if func_win32_import_lib_p "$dlprefile"; then func_tr_sh "$dlprefile" eval "curr_lafile=\$libfile_$func_tr_sh_result" dlprefile_dlbasename="" if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then # Use subshell, to avoid clobbering current variable values dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` if test -n "$dlprefile_dlname" ; then func_basename "$dlprefile_dlname" dlprefile_dlbasename="$func_basename_result" else # no lafile. user explicitly requested -dlpreopen . $sharedlib_from_linklib_cmd "$dlprefile" dlprefile_dlbasename=$sharedlib_from_linklib_result fi fi $opt_dry_run || { if test -n "$dlprefile_dlbasename" ; then eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' else func_warning "Could not compute DLL name from $name" eval '$ECHO ": $name " >> "$nlist"' fi func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" } else # not an import lib $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } fi ;; *) $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } ;; esac done $opt_dry_run || { # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $MV "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if $GREP -v "^: " < "$nlist" | if sort -k 3 /dev/null 2>&1; then sort -k 3 else sort +2 fi | uniq > "$nlist"S; then : else $GREP -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' else echo '/* NONE */' >> "$output_objdir/$my_dlsyms" fi echo >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ typedef struct { const char *name; void *address; } lt_dlsymlist; extern LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[]; LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = {\ { \"$my_originator\", (void *) 0 }," case $need_lib_prefix in no) eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; *) eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; esac echo >> "$output_objdir/$my_dlsyms" "\ {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_${my_prefix}_LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " } # !$opt_dry_run pic_flag_for_symtable= case "$compile_command " in *" -static "*) ;; *) case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; *-*-hpux*) pic_flag_for_symtable=" $pic_flag" ;; *) if test "X$my_pic_p" != Xno; then pic_flag_for_symtable=" $pic_flag" fi ;; esac ;; esac symtab_cflags= for arg in $LTCFLAGS; do case $arg in -pie | -fpie | -fPIE) ;; *) func_append symtab_cflags " $arg" ;; esac done # Now compile the dynamic symbol file. func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' # Clean up the generated files. func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' # Transform the symbol file into the correct name. symfileobj="$output_objdir/${my_outputname}S.$objext" case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` fi ;; *) compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` ;; esac ;; *) func_fatal_error "unknown suffix for \`$my_dlsyms'" ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` fi } # func_win32_libid arg # return the library type of file 'arg' # # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. # Despite the name, also deal with 64 bit binaries. func_win32_libid () { $opt_debug win32_libid_type="unknown" win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then func_to_tool_file "$1" func_convert_file_msys_to_w32 win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | $SED -n -e ' 1,100{ / I /{ s,.*,import, p q } }'` case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; esac fi ;; *DLL*) win32_libid_type="x86 DLL" ;; *executable*) # but shell scripts are "executable" too... case $win32_fileres in *MS\ Windows\ PE\ Intel*) win32_libid_type="x86 DLL" ;; esac ;; esac $ECHO "$win32_libid_type" } # func_cygming_dll_for_implib ARG # # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib () { $opt_debug sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` } # func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs # # The is the core of a fallback implementation of a # platform-specific function to extract the name of the # DLL associated with the specified import library LIBNAME. # # SECTION_NAME is either .idata$6 or .idata$7, depending # on the platform and compiler that created the implib. # # Echos the name of the DLL associated with the # specified import library. func_cygming_dll_for_implib_fallback_core () { $opt_debug match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` $OBJDUMP -s --section "$1" "$2" 2>/dev/null | $SED '/^Contents of section '"$match_literal"':/{ # Place marker at beginning of archive member dllname section s/.*/====MARK====/ p d } # These lines can sometimes be longer than 43 characters, but # are always uninteresting /:[ ]*file format pe[i]\{,1\}-/d /^In archive [^:]*:/d # Ensure marker is printed /^====MARK====/p # Remove all lines with less than 43 characters /^.\{43\}/!d # From remaining lines, remove first 43 characters s/^.\{43\}//' | $SED -n ' # Join marker and all lines until next marker into a single line /^====MARK====/ b para H $ b para b :para x s/\n//g # Remove the marker s/^====MARK====// # Remove trailing dots and whitespace s/[\. \t]*$// # Print /./p' | # we now have a list, one entry per line, of the stringified # contents of the appropriate section of all members of the # archive which possess that section. Heuristic: eliminate # all those which have a first or second character that is # a '.' (that is, objdump's representation of an unprintable # character.) This should work for all archives with less than # 0x302f exports -- but will fail for DLLs whose name actually # begins with a literal '.' or a single character followed by # a '.'. # # Of those that remain, print the first one. $SED -e '/^\./d;/^.\./d;q' } # func_cygming_gnu_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is a GNU/binutils-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_gnu_implib_p () { $opt_debug func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` test -n "$func_cygming_gnu_implib_tmp" } # func_cygming_ms_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is an MS-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_ms_implib_p () { $opt_debug func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` test -n "$func_cygming_ms_implib_tmp" } # func_cygming_dll_for_implib_fallback ARG # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # # This fallback implementation is for use when $DLLTOOL # does not support the --identify-strict option. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib_fallback () { $opt_debug if func_cygming_gnu_implib_p "$1" ; then # binutils import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` elif func_cygming_ms_implib_p "$1" ; then # ms-generated import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` else # unknown sharedlib_from_linklib_result="" fi } # func_extract_an_archive dir oldlib func_extract_an_archive () { $opt_debug f_ex_an_ar_dir="$1"; shift f_ex_an_ar_oldlib="$1" if test "$lock_old_archive_extraction" = yes; then lockfile=$f_ex_an_ar_oldlib.lock until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done fi func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ 'stat=$?; rm -f "$lockfile"; exit $stat' if test "$lock_old_archive_extraction" = yes; then $opt_dry_run || rm -f "$lockfile" fi if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" fi } # func_extract_archives gentop oldlib ... func_extract_archives () { $opt_debug my_gentop="$1"; shift my_oldlibs=${1+"$@"} my_oldobjs="" my_xlib="" my_xabs="" my_xdir="" for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac func_basename "$my_xlib" my_xlib="$func_basename_result" my_xlib_u=$my_xlib while :; do case " $extracted_archives " in *" $my_xlib_u "*) func_arith $extracted_serial + 1 extracted_serial=$func_arith_result my_xlib_u=lt$extracted_serial-$my_xlib ;; *) break ;; esac done extracted_archives="$extracted_archives $my_xlib_u" my_xdir="$my_gentop/$my_xlib_u" func_mkdir_p "$my_xdir" case $host in *-darwin*) func_verbose "Extracting $my_xabs" # Do not bother doing anything if just a dry run $opt_dry_run || { darwin_orig_dir=`pwd` cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` darwin_base_archive=`basename "$darwin_archive"` darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` if test -n "$darwin_arches"; then darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" for darwin_arch in $darwin_arches ; do func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" func_extract_an_archive "`pwd`" "${darwin_base_archive}" cd "$darwin_curdir" $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" done # $darwin_arches ## Okay now we've a bunch of thin objects, gotta fatten them up :) darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` $LIPO -create -output "$darwin_file" $darwin_files done # $darwin_filelist $RM -rf unfat-$$ cd "$darwin_orig_dir" else cd $darwin_orig_dir func_extract_an_archive "$my_xdir" "$my_xabs" fi # $darwin_arches } # !$opt_dry_run ;; *) func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` done func_extract_archives_result="$my_oldobjs" } # func_emit_wrapper [arg=no] # # Emit a libtool wrapper script on stdout. # Don't directly open a file because we may want to # incorporate the script contents within a cygwin/mingw # wrapper executable. Must ONLY be called from within # func_mode_link because it depends on a number of variables # set therein. # # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR # variable will take. If 'yes', then the emitted script # will assume that the directory in which it is stored is # the $objdir directory. This is a cygwin/mingw-specific # behavior. func_emit_wrapper () { func_emit_wrapper_arg1=${1-no} $ECHO "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. sed_quote_subst='$sed_quote_subst' # Be Bourne compatible if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variables: generated_by_libtool_version='$macro_version' notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$ECHO are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then file=\"\$0\"" qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` $ECHO "\ # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } ECHO=\"$qECHO\" fi # Very basic option parsing. These options are (a) specific to # the libtool wrapper, (b) are identical between the wrapper # /script/ and the wrapper /executable/ which is used only on # windows platforms, and (c) all begin with the string "--lt-" # (application programs are unlikely to have options which match # this pattern). # # There are only two supported options: --lt-debug and # --lt-dump-script. There is, deliberately, no --lt-help. # # The first argument to this parsing function should be the # script's $0 value, followed by "$@". lt_option_debug= func_parse_lt_options () { lt_script_arg0=\$0 shift for lt_opt do case \"\$lt_opt\" in --lt-debug) lt_option_debug=1 ;; --lt-dump-script) lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` cat \"\$lt_dump_D/\$lt_dump_F\" exit 0 ;; --lt-*) \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 exit 1 ;; esac done # Print the debug banner immediately: if test -n \"\$lt_option_debug\"; then echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 fi } # Used when --lt-debug. Prints its arguments to stdout # (redirection is the responsibility of the caller) func_lt_dump_args () { lt_dump_args_N=1; for lt_arg do \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` done } # Core function for launching the target application func_exec_program_core () { " case $host in # Backslashes separate directories on plain windows *-*-mingw | *-*-os2* | *-cegcc*) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac $ECHO "\ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 exit 1 } # A function to encapsulate launching the target application # Strips options in the --lt-* namespace from \$@ and # launches target application with the remaining arguments. func_exec_program () { case \" \$* \" in *\\ --lt-*) for lt_wr_arg do case \$lt_wr_arg in --lt-*) ;; *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; esac shift done ;; esac func_exec_program_core \${1+\"\$@\"} } # Parse options func_parse_lt_options \"\$0\" \${1+\"\$@\"} # Find the directory that this script lives in. thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` done # Usually 'no', except on cygwin/mingw when embedded into # the cwrapper. WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then # special case for '.' if test \"\$thisdir\" = \".\"; then thisdir=\`pwd\` fi # remove .libs from thisdir case \"\$thisdir\" in *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; $objdir ) thisdir=. ;; esac fi # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test "$fast_install" = yes; then $ECHO "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $MKDIR \"\$progdir\" else $RM \"\$progdir/\$file\" fi" $ECHO "\ # relink executable if necessary if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else $ECHO \"\$relink_command_output\" >&2 $RM \"\$progdir/\$file\" exit 1 fi fi $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $RM \"\$progdir/\$program\"; $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } $RM \"\$progdir/\$file\" fi" else $ECHO "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi $ECHO "\ if test -f \"\$progdir/\$program\"; then" # fixup the dll searchpath if we need to. # # Fix the DLL searchpath if we need to. Do this before prepending # to shlibpath, because on Windows, both are PATH and uninstalled # libraries must come first. if test -n "$dllsearchpath"; then $ECHO "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` export $shlibpath_var " fi $ECHO "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. func_exec_program \${1+\"\$@\"} fi else # The program doesn't exist. \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi fi\ " } # func_emit_cwrapperexe_src # emit the source code for a wrapper executable on stdout # Must ONLY be called from within func_mode_link because # it depends on a number of variable set therein. func_emit_cwrapperexe_src () { cat < #include #ifdef _MSC_VER # include # include # include #else # include # include # ifdef __CYGWIN__ # include # endif #endif #include #include #include #include #include #include #include #include /* declarations of non-ANSI functions */ #if defined(__MINGW32__) # ifdef __STRICT_ANSI__ int _putenv (const char *); # endif #elif defined(__CYGWIN__) # ifdef __STRICT_ANSI__ char *realpath (const char *, char *); int putenv (char *); int setenv (const char *, const char *, int); # endif /* #elif defined (other platforms) ... */ #endif /* portability defines, excluding path handling macros */ #if defined(_MSC_VER) # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv # define S_IXUSR _S_IEXEC # ifndef _INTPTR_T_DEFINED # define _INTPTR_T_DEFINED # define intptr_t int # endif #elif defined(__MINGW32__) # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv #elif defined(__CYGWIN__) # define HAVE_SETENV # define FOPEN_WB "wb" /* #elif defined (other platforms) ... */ #endif #if defined(PATH_MAX) # define LT_PATHMAX PATH_MAX #elif defined(MAXPATHLEN) # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 #endif #ifndef S_IXOTH # define S_IXOTH 0 #endif #ifndef S_IXGRP # define S_IXGRP 0 #endif /* path handling portability macros */ #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' #endif #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ defined (__OS2__) # define HAVE_DOS_BASED_FILE_SYSTEM # define FOPEN_WB "wb" # ifndef DIR_SEPARATOR_2 # define DIR_SEPARATOR_2 '\\' # endif # ifndef PATH_SEPARATOR_2 # define PATH_SEPARATOR_2 ';' # endif #endif #ifndef DIR_SEPARATOR_2 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) #else /* DIR_SEPARATOR_2 */ # define IS_DIR_SEPARATOR(ch) \ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) #endif /* DIR_SEPARATOR_2 */ #ifndef PATH_SEPARATOR_2 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) #else /* PATH_SEPARATOR_2 */ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ #ifndef FOPEN_WB # define FOPEN_WB "w" #endif #ifndef _O_BINARY # define _O_BINARY 0 #endif #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ if (stale) { free ((void *) stale); stale = 0; } \ } while (0) #if defined(LT_DEBUGWRAPPER) static int lt_debug = 1; #else static int lt_debug = 0; #endif const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ void *xmalloc (size_t num); char *xstrdup (const char *string); const char *base_name (const char *name); char *find_executable (const char *wrapper); char *chase_symlinks (const char *pathspec); int make_executable (const char *path); int check_executable (const char *path); char *strendzap (char *str, const char *pat); void lt_debugprintf (const char *file, int line, const char *fmt, ...); void lt_fatal (const char *file, int line, const char *message, ...); static const char *nonnull (const char *s); static const char *nonempty (const char *s); void lt_setenv (const char *name, const char *value); char *lt_extend_str (const char *orig_value, const char *add, int to_end); void lt_update_exe_path (const char *name, const char *value); void lt_update_lib_path (const char *name, const char *value); char **prepare_spawn (char **argv); void lt_dump_script (FILE *f); EOF cat <= 0) && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) return 1; else return 0; } int make_executable (const char *path) { int rval = 0; struct stat st; lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", nonempty (path)); if ((!path) || (!*path)) return 0; if (stat (path, &st) >= 0) { rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); } return rval; } /* Searches for the full path of the wrapper. Returns newly allocated full path name if found, NULL otherwise Does not chase symlinks, even on platforms that support them. */ char * find_executable (const char *wrapper) { int has_slash = 0; const char *p; const char *p_next; /* static buffer for getcwd */ char tmp[LT_PATHMAX + 1]; int tmp_len; char *concat_name; lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", nonempty (wrapper)); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; /* Absolute path? */ #if defined (HAVE_DOS_BASED_FILE_SYSTEM) if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } else { #endif if (IS_DIR_SEPARATOR (wrapper[0])) { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } #if defined (HAVE_DOS_BASED_FILE_SYSTEM) } #endif for (p = wrapper; *p; p++) if (*p == '/') { has_slash = 1; break; } if (!has_slash) { /* no slashes; search PATH */ const char *path = getenv ("PATH"); if (path != NULL) { for (p = path; *p; p = p_next) { const char *q; size_t p_len; for (q = p; *q; q++) if (IS_PATH_SEPARATOR (*q)) break; p_len = q - p; p_next = (*q == '\0' ? q : q + 1); if (p_len == 0) { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); } else { concat_name = XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, p, p_len); concat_name[p_len] = '/'; strcpy (concat_name + p_len + 1, wrapper); } if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } } /* not found in PATH; assume curdir */ } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); return NULL; } char * chase_symlinks (const char *pathspec) { #ifndef S_ISLNK return xstrdup (pathspec); #else char buf[LT_PATHMAX]; struct stat s; char *tmp_pathspec = xstrdup (pathspec); char *p; int has_symlinks = 0; while (strlen (tmp_pathspec) && !has_symlinks) { lt_debugprintf (__FILE__, __LINE__, "checking path component for symlinks: %s\n", tmp_pathspec); if (lstat (tmp_pathspec, &s) == 0) { if (S_ISLNK (s.st_mode) != 0) { has_symlinks = 1; break; } /* search backwards for last DIR_SEPARATOR */ p = tmp_pathspec + strlen (tmp_pathspec) - 1; while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) p--; if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) { /* no more DIR_SEPARATORS left */ break; } *p = '\0'; } else { lt_fatal (__FILE__, __LINE__, "error accessing file \"%s\": %s", tmp_pathspec, nonnull (strerror (errno))); } } XFREE (tmp_pathspec); if (!has_symlinks) { return xstrdup (pathspec); } tmp_pathspec = realpath (pathspec, buf); if (tmp_pathspec == 0) { lt_fatal (__FILE__, __LINE__, "could not follow symlinks for %s", pathspec); } return xstrdup (tmp_pathspec); #endif } char * strendzap (char *str, const char *pat) { size_t len, patlen; assert (str != NULL); assert (pat != NULL); len = strlen (str); patlen = strlen (pat); if (patlen <= len) { str += len - patlen; if (strcmp (str, pat) == 0) *str = '\0'; } return str; } void lt_debugprintf (const char *file, int line, const char *fmt, ...) { va_list args; if (lt_debug) { (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); va_start (args, fmt); (void) vfprintf (stderr, fmt, args); va_end (args); } } static void lt_error_core (int exit_status, const char *file, int line, const char *mode, const char *message, va_list ap) { fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); if (exit_status >= 0) exit (exit_status); } void lt_fatal (const char *file, int line, const char *message, ...) { va_list ap; va_start (ap, message); lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); va_end (ap); } static const char * nonnull (const char *s) { return s ? s : "(null)"; } static const char * nonempty (const char *s) { return (s && !*s) ? "(empty)" : nonnull (s); } void lt_setenv (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_setenv) setting '%s' to '%s'\n", nonnull (name), nonnull (value)); { #ifdef HAVE_SETENV /* always make a copy, for consistency with !HAVE_SETENV */ char *str = xstrdup (value); setenv (name, str, 1); #else int len = strlen (name) + 1 + strlen (value) + 1; char *str = XMALLOC (char, len); sprintf (str, "%s=%s", name, value); if (putenv (str) != EXIT_SUCCESS) { XFREE (str); } #endif } } char * lt_extend_str (const char *orig_value, const char *add, int to_end) { char *new_value; if (orig_value && *orig_value) { int orig_value_len = strlen (orig_value); int add_len = strlen (add); new_value = XMALLOC (char, add_len + orig_value_len + 1); if (to_end) { strcpy (new_value, orig_value); strcpy (new_value + orig_value_len, add); } else { strcpy (new_value, add); strcpy (new_value + add_len, orig_value); } } else { new_value = xstrdup (add); } return new_value; } void lt_update_exe_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); /* some systems can't cope with a ':'-terminated path #' */ int len = strlen (new_value); while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) { new_value[len-1] = '\0'; } lt_setenv (name, new_value); XFREE (new_value); } } void lt_update_lib_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); lt_setenv (name, new_value); XFREE (new_value); } } EOF case $host_os in mingw*) cat <<"EOF" /* Prepares an argument vector before calling spawn(). Note that spawn() does not by itself call the command interpreter (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); GetVersionEx(&v); v.dwPlatformId == VER_PLATFORM_WIN32_NT; }) ? "cmd.exe" : "command.com"). Instead it simply concatenates the arguments, separated by ' ', and calls CreateProcess(). We must quote the arguments since Win32 CreateProcess() interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a special way: - Space and tab are interpreted as delimiters. They are not treated as delimiters if they are surrounded by double quotes: "...". - Unescaped double quotes are removed from the input. Their only effect is that within double quotes, space and tab are treated like normal characters. - Backslashes not followed by double quotes are not special. - But 2*n+1 backslashes followed by a double quote become n backslashes followed by a double quote (n >= 0): \" -> " \\\" -> \" \\\\\" -> \\" */ #define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" #define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" char ** prepare_spawn (char **argv) { size_t argc; char **new_argv; size_t i; /* Count number of arguments. */ for (argc = 0; argv[argc] != NULL; argc++) ; /* Allocate new argument vector. */ new_argv = XMALLOC (char *, argc + 1); /* Put quoted arguments into the new argument vector. */ for (i = 0; i < argc; i++) { const char *string = argv[i]; if (string[0] == '\0') new_argv[i] = xstrdup ("\"\""); else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) { int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); size_t length; unsigned int backslashes; const char *s; char *quoted_string; char *p; length = 0; backslashes = 0; if (quote_around) length++; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') length += backslashes + 1; length++; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) length += backslashes + 1; quoted_string = XMALLOC (char, length + 1); p = quoted_string; backslashes = 0; if (quote_around) *p++ = '"'; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') { unsigned int j; for (j = backslashes + 1; j > 0; j--) *p++ = '\\'; } *p++ = c; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) { unsigned int j; for (j = backslashes; j > 0; j--) *p++ = '\\'; *p++ = '"'; } *p = '\0'; new_argv[i] = quoted_string; } else new_argv[i] = (char *) string; } new_argv[argc] = NULL; return new_argv; } EOF ;; esac cat <<"EOF" void lt_dump_script (FILE* f) { EOF func_emit_wrapper yes | $SED -n -e ' s/^\(.\{79\}\)\(..*\)/\1\ \2/ h s/\([\\"]\)/\\\1/g s/$/\\n/ s/\([^\n]*\).*/ fputs ("\1", f);/p g D' cat <<"EOF" } EOF } # end: func_emit_cwrapperexe_src # func_win32_import_lib_p ARG # True if ARG is an import lib, as indicated by $file_magic_cmd func_win32_import_lib_p () { $opt_debug case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in *import*) : ;; *) false ;; esac } # func_mode_link arg... func_mode_link () { $opt_debug case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra # flag for every libtool invocation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying # to make a dll which has undefined symbols, in which case not # even a static library is built. For now, we need to specify # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. allow_undefined=yes ;; *) allow_undefined=yes ;; esac libtool_args=$nonopt base_compile="$nonopt $@" compile_command=$nonopt finalize_command=$nonopt compile_rpath= finalize_rpath= compile_shlibpath= finalize_shlibpath= convenience= old_convenience= deplibs= old_deplibs= compiler_flags= linker_flags= dllsearchpath= lib_search_path=`pwd` inst_prefix_dir= new_inherited_linker_flags= avoid_version=no bindir= dlfiles= dlprefiles= dlself=no export_dynamic=no export_symbols= export_symbols_regex= generated= libobjs= ltlibs= module=no no_install=no objs= non_pic_objects= precious_files_regex= prefer_static_libs=no preload=no prev= prevarg= release= rpath= xrpath= perm_rpath= temp_rpath= thread_safe=no vinfo= vinfo_number=no weak_libs= single_module="${wl}-single_module" func_infer_tag $base_compile # We need to know -static, to get the right output filenames. for arg do case $arg in -shared) test "$build_libtool_libs" != yes && \ func_fatal_configuration "can not build a shared library" build_old_libs=no break ;; -all-static | -static | -static-libtool-libs) case $arg in -all-static) if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built ;; -static-libtool-libs) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; esac build_libtool_libs=no build_old_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do arg="$1" shift func_quote_for_eval "$arg" qarg=$func_quote_for_eval_unquoted_result func_append libtool_args " $func_quote_for_eval_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) func_append compile_command " @OUTPUT@" func_append finalize_command " @OUTPUT@" ;; esac case $prev in bindir) bindir="$arg" prev= continue ;; dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. func_append compile_command " @SYMFILE@" func_append finalize_command " @SYMFILE@" preload=yes fi case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test "$prev" = dlprefiles; then dlself=yes elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test "$prev" = dlfiles; then func_append dlfiles " $arg" else func_append dlprefiles " $arg" fi prev= continue ;; esac ;; expsyms) export_symbols="$arg" test -f "$arg" \ || func_fatal_error "symbol file \`$arg' does not exist" prev= continue ;; expsyms_regex) export_symbols_regex="$arg" prev= continue ;; framework) case $host in *-*-darwin*) case "$deplibs " in *" $qarg.ltframework "*) ;; *) func_append deplibs " $qarg.ltframework" # this is fixed later ;; esac ;; esac prev= continue ;; inst_prefix) inst_prefix_dir="$arg" prev= continue ;; objectlist) if test -f "$arg"; then save_arg=$arg moreargs= for fil in `cat "$save_arg"` do # func_append moreargs " $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi done else func_fatal_error "link input file \`$arg' does not exist" fi arg=$save_arg prev= continue ;; precious_regex) precious_files_regex="$arg" prev= continue ;; release) release="-$arg" prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; *) func_append rpath " $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) func_append xrpath " $arg" ;; esac fi prev= continue ;; shrext) shrext_cmds="$arg" prev= continue ;; weak) func_append weak_libs " $arg" prev= continue ;; xcclinker) func_append linker_flags " $qarg" func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xcompiler) func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xlinker) func_append linker_flags " $qarg" func_append compiler_flags " $wl$qarg" prev= func_append compile_command " $wl$qarg" func_append finalize_command " $wl$qarg" continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi # test -n "$prev" prevarg="$arg" case $arg in -all-static) if test -n "$link_static_flag"; then # See comment for -static flag below, for more details. func_append compile_command " $link_static_flag" func_append finalize_command " $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. func_fatal_error "\`-allow-undefined' must not be used because it is the default" ;; -avoid-version) avoid_version=yes continue ;; -bindir) prev=bindir continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then func_fatal_error "more than one -exported-symbols argument is not allowed" fi if test "X$arg" = "X-export-symbols"; then prev=expsyms else prev=expsyms_regex fi continue ;; -framework) prev=framework continue ;; -inst-prefix-dir) prev=inst_prefix continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) func_append compile_command " $arg" func_append finalize_command " $arg" ;; esac continue ;; -L*) func_stripname "-L" '' "$arg" if test -z "$func_stripname_result"; then if test "$#" -gt 0; then func_fatal_error "require no space between \`-L' and \`$1'" else func_fatal_error "need path for \`-L' option" fi fi func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` test -z "$absdir" && \ func_fatal_error "cannot determine absolute directory name of \`$dir'" dir="$absdir" ;; esac case "$deplibs " in *" -L$dir "* | *" $arg "*) # Will only happen for absolute or sysroot arguments ;; *) # Preserve sysroot, but never include relative directories case $dir in [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; *) func_append deplibs " -L$dir" ;; esac func_append lib_search_path " $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; ::) dllsearchpath=$dir;; *) func_append dllsearchpath ":$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac continue ;; -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) # These systems don't actually have a C or math library (as such) continue ;; *-*-os2*) # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework func_append deplibs " System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype test "X$arg" = "X-lc" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work test "X$arg" = "X-lc" && continue ;; esac elif test "X$arg" = "X-lc_r"; then case $host in *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc_r directly, use -pthread flag. continue ;; esac fi func_append deplibs " $arg" continue ;; -module) module=yes continue ;; # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. -model|-arch|-isysroot|--sysroot) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" prev=xcompiler continue ;; -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" case "$new_inherited_linker_flags " in *" $arg "*) ;; * ) func_append new_inherited_linker_flags " $arg" ;; esac continue ;; -multi_module) single_module="${wl}-multi_module" continue ;; -no-fast-install) fast_install=no continue ;; -no-install) case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. func_warning "\`-no-install' is ignored for $host" func_warning "assuming \`-no-fast-install' instead" fast_install=no ;; *) no_install=yes ;; esac continue ;; -no-undefined) allow_undefined=no continue ;; -objectlist) prev=objectlist continue ;; -o) prev=output ;; -precious-files-regex) prev=precious_regex continue ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -R) prev=xrpath continue ;; -R*) func_stripname '-R' '' "$arg" dir=$func_stripname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; =*) func_stripname '=' '' "$dir" dir=$lt_sysroot$func_stripname_result ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in *" $dir "*) ;; *) func_append xrpath " $dir" ;; esac continue ;; -shared) # The effects of -shared are defined in a previous loop. continue ;; -shrext) prev=shrext continue ;; -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects # would be equivalent was wrong. It would break on at least # Digital Unix and AIX. continue ;; -thread-safe) thread_safe=yes continue ;; -version-info) prev=vinfo continue ;; -version-number) prev=vinfo vinfo_number=yes continue ;; -weak) prev=weak continue ;; -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" func_append arg " $func_quote_for_eval_result" func_append compiler_flags " $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Wl,*) func_stripname '-Wl,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" func_append arg " $wl$func_quote_for_eval_result" func_append compiler_flags " $wl$func_quote_for_eval_result" func_append linker_flags " $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Xcompiler) prev=xcompiler continue ;; -Xlinker) prev=xlinker continue ;; -XCClinker) prev=xcclinker continue ;; # -msg_* for osf cc -msg_*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; # Flags to be passed through unchanged, with rationale: # -64, -mips[0-9] enable 64-bit mode for the SGI compiler # -r[0-9][0-9]* specify processor for the SGI compiler # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler # +DA*, +DD* enable 64-bit mode for the HP compiler # -q* compiler args for the IBM compiler # -m*, -t[45]*, -txscale* architecture-specific flags for GCC # -F/path path to uninstalled frameworks, gcc on darwin # -p, -pg, --coverage, -fprofile-* profiling flags for GCC # @file GCC response files # -tp=* Portland pgcc target processor selection # --sysroot=* for sysroot support # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ -O*|-flto*|-fwhopr*|-fuse-linker-plugin) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" func_append compile_command " $arg" func_append finalize_command " $arg" func_append compiler_flags " $arg" continue ;; # Some other compiler flag. -* | +*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; *.$objext) # A standard object. func_append objs " $arg" ;; *.lo) # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi ;; *.$libext) # An archive. func_append deplibs " $arg" func_append old_deplibs " $arg" continue ;; *.la) # A libtool-controlled library. func_resolve_sysroot "$arg" if test "$prev" = dlfiles; then # This library was specified with -dlopen. func_append dlfiles " $func_resolve_sysroot_result" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. func_append dlprefiles " $func_resolve_sysroot_result" prev= else func_append deplibs " $func_resolve_sysroot_result" fi continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then func_append compile_command " $arg" func_append finalize_command " $arg" fi done # argument parsing loop test -n "$prev" && \ func_fatal_help "the \`$prevarg' option requires an argument" if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" func_append compile_command " $arg" func_append finalize_command " $arg" fi oldlibs= # calculate the name of the file, without its directory func_basename "$output" outputname="$func_basename_result" libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" func_dirname "$output" "/" "" output_objdir="$func_dirname_result$objdir" func_to_tool_file "$output_objdir/" tool_output_objdir=$func_to_tool_file_result # Create the object directory. func_mkdir_p "$output_objdir" # Determine the type of output case $output in "") func_fatal_help "you must specify an output file" ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; *.la) linkmode=lib ;; *) linkmode=prog ;; # Anything else should be a program. esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do if $opt_preserve_dup_deps ; then case "$libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append libs " $deplib" done if test "$linkmode" = lib; then libs="$predeps $libs $compiler_lib_search_path $postdeps" # Compute libraries that are listed more than once in $predeps # $postdeps and mark them as special (i.e., whose duplicates are # not to be eliminated). pre_post_deps= if $opt_duplicate_compiler_generated_deps; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; esac func_append pre_post_deps " $pre_post_dep" done fi pre_post_deps= fi deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries notinst_path= # paths that contain not-installed libtool libraries case $linkmode in lib) passes="conv dlpreopen link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" ;; esac done ;; prog) compile_deplibs= finalize_deplibs= alldeplibs=no newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" ;; *) passes="conv" ;; esac for pass in $passes; do # The preopen pass in lib mode reverses $deplibs; put it back here # so that -L comes before libs that need it for instance... if test "$linkmode,$pass" = "lib,link"; then ## FIXME: Find the place where the list is rebuilt in the wrong ## order, and fix it there properly tmp_deplibs= for deplib in $deplibs; do tmp_deplibs="$deplib $tmp_deplibs" done deplibs="$tmp_deplibs" fi if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan"; then libs="$deplibs" deplibs= fi if test "$linkmode" = prog; then case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; link) libs="$deplibs %DEPLIBS%" test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ;; esac fi if test "$linkmode,$pass" = "lib,dlpreopen"; then # Collect and forward deplibs of preopened libtool libs for lib in $dlprefiles; do # Ignore non-libtool-libs dependency_libs= func_resolve_sysroot "$lib" case $lib in *.la) func_source "$func_resolve_sysroot_result" ;; esac # Collect preopened libtool deplibs, except any this library # has declared as weak libs for deplib in $dependency_libs; do func_basename "$deplib" deplib_base=$func_basename_result case " $weak_libs " in *" $deplib_base "*) ;; *) func_append deplibs " $deplib" ;; esac done done libs="$dlprefiles" fi if test "$pass" = dlopen; then # Collect dlpreopened libraries save_deplibs="$deplibs" deplibs= fi for deplib in $libs; do lib= found=no case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append compiler_flags " $deplib" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi continue ;; -l*) if test "$linkmode" != lib && test "$linkmode" != prog; then func_warning "\`-l' is ignored for archives/objects" continue fi func_stripname '-l' '' "$deplib" name=$func_stripname_result if test "$linkmode" = lib; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" fi for searchdir in $searchdirs; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library lib="$searchdir/lib${name}${search_ext}" if test -f "$lib"; then if test "$search_ext" = ".la"; then found=yes else found=no fi break 2 fi done done if test "$found" != yes; then # deplib doesn't seem to be a libtool library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue else # deplib is a libtool library # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, # We need to do some special things here, and not later. if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $deplib "*) if func_lalib_p "$lib"; then library_names= old_library= func_source "$lib" for l in $old_library $library_names; do ll="$l" done if test "X$ll" = "X$old_library" ; then # only static version available found=no func_dirname "$lib" "" "." ladir="$func_dirname_result" lib=$ladir/$old_library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue fi fi ;; *) ;; esac fi fi ;; # -l *.ltframework) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi continue ;; -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; prog) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi if test "$pass" = scan; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; *) func_warning "\`-L' is ignored for archives/objects" ;; esac # linkmode continue ;; # -L -R*) if test "$pass" = link; then func_stripname '-R' '' "$deplib" func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; *) func_append xrpath " $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; *.la) func_resolve_sysroot "$deplib" lib=$func_resolve_sysroot_result ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) # Linking convenience modules into shared libraries is allowed, # but linking other static libraries is non-portable. case " $dlpreconveniencelibs " in *" $deplib "*) ;; *) valid_a_lib=no case $deplibs_check_method in match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=yes fi ;; pass_all) valid_a_lib=yes ;; esac if test "$valid_a_lib" != yes; then echo $ECHO "*** Warning: Trying to link with static lib archive $deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because the file extensions .$libext of this argument makes me believe" echo "*** that it is just a static archive that I should not use here." else echo $ECHO "*** Warning: Linking the shared library $output against the" $ECHO "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi ;; esac continue ;; prog) if test "$pass" != link; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi continue ;; esac # linkmode ;; # *.$libext *.lo | *.$objext) if test "$pass" = conv; then deplibs="$deplib $deplibs" elif test "$linkmode" = prog; then if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. func_append newdlprefiles " $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append newdlfiles " $deplib" fi fi continue ;; %DEPLIBS%) alldeplibs=yes continue ;; esac # case $deplib if test "$found" = yes || test -f "$lib"; then : else func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" fi # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$lib" \ || func_fatal_error "\`$lib' is not a valid libtool archive" func_dirname "$lib" "" "." ladir="$func_dirname_result" dlname= dlopen= dlpreopen= libdir= library_names= old_library= inherited_linker_flags= # If the library was installed with an old release of libtool, # it will not redefine variables installed, or shouldnotlink installed=yes shouldnotlink=no avoidtemprpath= # Read the .la file func_source "$lib" # Convert "-framework foo" to "foo.ltframework" if test -n "$inherited_linker_flags"; then tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do case " $new_inherited_linker_flags " in *" $tmp_inherited_linker_flag "*) ;; *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; esac done fi dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then test -n "$dlopen" && func_append dlfiles " $dlopen" test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" fi if test "$pass" = conv; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # It is a libtool convenience library, so add in its objects. func_append convenience " $ladir/$objdir/$old_library" func_append old_convenience " $ladir/$objdir/$old_library" tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done elif test "$linkmode" != prog && test "$linkmode" != lib; then func_fatal_error "\`$lib' is not a convenience library" fi continue fi # $pass = conv # Get the name of the library we link against. linklib= if test -n "$old_library" && { test "$prefer_static_libs" = yes || test "$prefer_static_libs,$installed" = "built,no"; }; then linklib=$old_library else for l in $old_library $library_names; do linklib="$l" done fi if test -z "$linklib"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then func_fatal_error "cannot -dlopen a convenience library: \`$lib'" fi if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. func_append dlprefiles " $lib $dependency_libs" else func_append newdlfiles " $lib" fi continue fi # $pass = dlopen # We need an absolute path. case $ladir in [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then func_warning "cannot determine absolute directory name of \`$ladir'" func_warning "passing it literally to the linker, although it might fail" abs_ladir="$ladir" fi ;; esac func_basename "$lib" laname="$func_basename_result" # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then func_warning "library \`$lib' was moved." dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else dir="$lt_sysroot$libdir" absdir="$lt_sysroot$libdir" fi test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then dir="$ladir" absdir="$abs_ladir" # Remove this search path later func_append notinst_path " $abs_ladir" else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later func_append notinst_path " $abs_ladir" fi fi # $installed = yes func_stripname 'lib' '.la' "$laname" name=$func_stripname_result # This library was specified with -dlpreopen. if test "$pass" = dlpreopen; then if test -z "$libdir" && test "$linkmode" = prog; then func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" fi case "$host" in # special handling for platforms with PE-DLLs. *cygwin* | *mingw* | *cegcc* ) # Linker will automatically link against shared library if both # static and shared are present. Therefore, ensure we extract # symbols from the import library if a shared library is present # (otherwise, the dlopen module name will be incorrect). We do # this by putting the import library name into $newdlprefiles. # We recover the dlopen module name by 'saving' the la file # name in a special purpose variable, and (later) extracting the # dlname from the la file. if test -n "$dlname"; then func_tr_sh "$dir/$linklib" eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" func_append newdlprefiles " $dir/$linklib" else func_append newdlprefiles " $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ func_append dlpreconveniencelibs " $dir/$old_library" fi ;; * ) # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then func_append newdlprefiles " $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ func_append dlpreconveniencelibs " $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then func_append newdlprefiles " $dir/$dlname" else func_append newdlprefiles " $dir/$linklib" fi ;; esac fi # $pass = dlpreopen if test -z "$libdir"; then # Link the convenience library if test "$linkmode" = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi if test "$linkmode" = prog && test "$pass" != link; then func_append newlib_search_path " $ladir" deplibs="$lib $deplibs" linkalldeplibs=no if test "$link_all_deplibs" != no || test -z "$library_names" || test "$build_libtool_libs" = no; then linkalldeplibs=yes fi tmp_libs= for deplib in $dependency_libs; do case $deplib in -L*) func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; esac # Need to link against all dependency_libs? if test "$linkalldeplibs" = yes; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done # for deplib continue fi # $linkmode = prog... if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && { { test "$prefer_static_libs" = no || test "$prefer_static_libs,$installed" = "built,yes"; } || test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. case "$temp_rpath:" in *"$absdir:"*) ;; *) func_append temp_rpath "$absdir:" ;; esac fi # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) func_append compile_rpath " $absdir" ;; esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac ;; esac fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && { test "$deplibs_check_method" = pass_all || { test "$build_libtool_libs" = yes && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi fi link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs if test "$use_static_libs" = built && test "$installed" = yes; then use_static_libs=no fi if test -n "$library_names" && { test "$use_static_libs" = no || test -z "$old_library"; }; then case $host in *cygwin* | *mingw* | *cegcc*) # No point in relinking DLLs because paths are not encoded func_append notinst_deplibs " $lib" need_relink=no ;; *) if test "$installed" = no; then func_append notinst_deplibs " $lib" need_relink=yes fi ;; esac # This is a shared library # Warn about portability, can't link against -module's on some # systems (darwin). Don't bleat about dlopened modules though! dlopenmodule="" for dlpremoduletest in $dlprefiles; do if test "X$dlpremoduletest" = "X$lib"; then dlopenmodule="$dlpremoduletest" break fi done if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then echo if test "$linkmode" = prog; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else $ECHO "*** Warning: Linking the shared library $output against the loadable module" fi $ECHO "*** $linklib is not portable!" fi if test "$linkmode" = lib && test "$hardcode_into_libs" = yes; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) func_append compile_rpath " $absdir" ;; esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac ;; esac fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names shift realname="$1" shift libname=`eval "\\$ECHO \"$libname_spec\""` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in *cygwin* | mingw* | *cegcc*) func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; esac eval soname=\"$soname_spec\" else soname="$realname" fi # Make a new name for the extract_expsyms_cmds to use soroot="$soname" func_basename "$soroot" soname="$func_basename_result" func_stripname 'lib' '.dll' "$soname" newlib=libimp-$func_stripname_result.a # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else func_verbose "extracting exported symbol list from \`$soname'" func_execute_cmds "$extract_expsyms_cmds" 'exit $?' fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else func_verbose "generating import library for \`$soname'" func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" if test "$linkmode" = prog || test "$opt_mode" != relink; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" case $host in *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; *-*-sysv4*uw2*) add_dir="-L$dir" ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir="-L$dir" ;; *-*-darwin* ) # if the lib is a (non-dlopened) module then we can not # link against it, someone is ignoring the earlier warnings if /usr/bin/file -L $add 2> /dev/null | $GREP ": [^:]* bundle" >/dev/null ; then if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" if test -z "$old_library" ; then echo echo "*** And there doesn't seem to be a static archive available" echo "*** The link will probably fail, sorry" else add="$dir/$old_library" fi elif test -n "$old_library"; then add="$dir/$old_library" fi fi esac elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; esac add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = no; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; relink) if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$absdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; *) lib_linked=no ;; esac if test "$lib_linked" != yes; then func_fatal_configuration "unsupported hardcode properties" fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; *) func_append compile_shlibpath "$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" if test "$hardcode_direct" != yes && test "$hardcode_minus_L" != yes && test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac fi fi fi if test "$linkmode" = prog || test "$opt_mode" = relink; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac add="-l$name" elif test "$hardcode_automatic" = yes; then if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then add="$inst_prefix_dir$libdir/$linklib" else add="$libdir/$linklib" fi else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" fi if test "$linkmode" = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" fi fi elif test "$linkmode" = prog; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test "$hardcode_direct" != unsupported; then test -n "$old_library" && linklib="$old_library" compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi elif test "$build_libtool_libs" = yes; then # Not a shared library if test "$deplibs_check_method" != pass_all; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. echo $ECHO "*** Warning: This system can not link to static lib archive $lib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then echo "*** But as you try to build a module library, libtool will still create " echo "*** a static module, that should work as long as the dlopening application" echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi else deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? if test "$linkmode" = lib; then if test -n "$dependency_libs" && { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in -R*) func_stripname '-R' '' "$libdir" temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; *) func_append xrpath " $temp_xrpath";; esac;; *) func_append temp_deplibs " $libdir";; esac done dependency_libs="$temp_deplibs" fi func_append newlib_search_path " $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" case $deplib in -L*) func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result";; *) func_resolve_sysroot "$deplib" ;; esac if $opt_preserve_dup_deps ; then case "$tmp_libs " in *" $func_resolve_sysroot_result "*) func_append specialdeplibs " $func_resolve_sysroot_result" ;; esac fi func_append tmp_libs " $func_resolve_sysroot_result" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do path= case $deplib in -L*) path="$deplib" ;; *.la) func_resolve_sysroot "$deplib" deplib=$func_resolve_sysroot_result func_dirname "$deplib" "" "." dir=$func_dirname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then func_warning "cannot determine absolute directory name of \`$dir'" absdir="$dir" fi ;; esac if $GREP "^installed=no" $deplib > /dev/null; then case $host in *-*-darwin*) depdepl= eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names" ; then for tmp in $deplibrary_names ; do depdepl=$tmp done if test -f "$absdir/$objdir/$depdepl" ; then depdepl="$absdir/$objdir/$depdepl" darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` if test -z "$darwin_install_name"; then darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" path= fi fi ;; *) path="-L$absdir/$objdir" ;; esac else eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" test "$absdir" != "$libdir" && \ func_warning "\`$deplib' seems to be moved" path="-L$absdir" fi ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs if test "$pass" = link; then if test "$linkmode" = "prog"; then compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi dependency_libs="$newdependency_libs" if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi if test "$pass" != dlopen; then if test "$pass" != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; *) func_append lib_search_path " $dir" ;; esac done newlib_search_path= fi if test "$linkmode,$pass" != "prog,link"; then vars="deplibs" else vars="compile_deplibs finalize_deplibs" fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do # FIXME: Pedantically, this is the right thing to do, so # that some nasty dependency loop isn't accidentally # broken: #new_libs="$deplib $new_libs" # Pragmatically, this seems to cause very few problems in # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; -R*) ;; *) # And here is the reason: when a library appears more # than once as an explicit dependence of a library, or # is implicitly linked in more than once by the # compiler, it is considered special, and multiple # occurrences thereof are not removed. Compare this # with having the same library being listed as a # dependency of multiple other libraries: in this case, # we know (pedantically, we assume) the library does not # need to be listed more than once, so we keep only the # last copy. This is not always right, but it is rare # enough that we require users that really mean to play # such unportable linking tricks to link the library # using -Wl,-lname, so that libtool does not consider it # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$deplib $new_libs" ;; esac ;; esac ;; esac done tmp_libs= for deplib in $new_libs; do case $deplib in -L*) case " $tmp_libs " in *" $deplib "*) ;; *) func_append tmp_libs " $deplib" ;; esac ;; *) func_append tmp_libs " $deplib" ;; esac done eval $var=\"$tmp_libs\" done # for var fi # Last step: remove runtime libs from dependency_libs # (they stay in deplibs) tmp_libs= for i in $dependency_libs ; do case " $predeps $postdeps $compiler_lib_search_path " in *" $i "*) i="" ;; esac if test -n "$i" ; then func_append tmp_libs " $i" fi done dependency_libs=$tmp_libs done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" fi if test "$linkmode" = prog || test "$linkmode" = lib; then dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for archives" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for archives" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for archives" test -n "$xrpath" && \ func_warning "\`-R' is ignored for archives" test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for archives" test -n "$release" && \ func_warning "\`-release' is ignored for archives" test -n "$export_symbols$export_symbols_regex" && \ func_warning "\`-export-symbols' is ignored for archives" # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" func_append objs "$old_deplibs" ;; lib) # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) func_stripname 'lib' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) test "$module" = no && \ func_fatal_help "libtool library \`$output' must begin with \`lib'" if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required func_stripname '' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else func_stripname '' '.la' "$outputname" libname=$func_stripname_result fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" else echo $ECHO "*** Warning: Linking the shared library $output against the non-libtool" $ECHO "*** objects $objs is not portable!" func_append libobjs " $objs" fi fi test "$dlself" != no && \ func_warning "\`-dlopen self' is ignored for libtool libraries" set dummy $rpath shift test "$#" -gt 1 && \ func_warning "ignoring multiple \`-rpath's for a libtool library" install_libdir="$1" oldlibs= if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. # Some compilers have problems with a `.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for convenience libraries" test -n "$release" && \ func_warning "\`-release' is ignored for convenience libraries" else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 shift IFS="$save_ifs" test -n "$7" && \ func_fatal_help "too many parameters to \`-version-info'" # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts # to make the code below a bit more comprehensible case $vinfo_number in yes) number_major="$1" number_minor="$2" number_revision="$3" # # There are really only two kinds -- those that # use the current revision as the major version # and those that subtract age and use age as # a minor version. But, then there is irix # which has an extra 1 added just for fun # case $version_type in # correct linux to gnu/linux during the next big refactor darwin|linux|osf|windows|none) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_revision" ;; freebsd-aout|freebsd-elf|qnx|sunos) current="$number_major" revision="$number_minor" age="0" ;; irix|nonstopux) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_minor" lt_irix_increment=no ;; *) func_fatal_configuration "$modename: unknown library version type \`$version_type'" ;; esac ;; no) current="$1" revision="$2" age="$3" ;; esac # Check that each of the things are valid numbers. case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "CURRENT \`$current' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "REVISION \`$revision' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "AGE \`$age' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac if test "$age" -gt "$current"; then func_error "AGE \`$age' is greater than the current interface number \`$current'" func_fatal_error "\`$vinfo' is not valid version information" fi # Calculate the version variables. major= versuffix= verstring= case $version_type in none) ;; darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... func_arith $current + 1 minor_current=$func_arith_result xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; freebsd-aout) major=".$current" versuffix=".$current.$revision"; ;; freebsd-elf) major=".$current" versuffix=".$current" ;; irix | nonstopux) if test "X$lt_irix_increment" = "Xno"; then func_arith $current - $age else func_arith $current - $age + 1 fi major=$func_arith_result case $version_type in nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; esac verstring="$verstring_prefix$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision while test "$loop" -ne 0; do func_arith $revision - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring_prefix$major.$iface:$verstring" done # Before this point, $major must not contain `.'. major=.$major versuffix="$major.$revision" ;; linux) # correct to gnu/linux during the next big refactor func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" ;; osf) func_arith $current - $age major=.$func_arith_result versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age while test "$loop" -ne 0; do func_arith $current - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring:${iface}.0" done # Make executables depend on our current version. func_append verstring ":${current}.0" ;; qnx) major=".$current" versuffix=".$current" ;; sunos) major=".$current" versuffix=".$current.$revision" ;; windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; *) func_fatal_configuration "unknown library version type \`$version_type'" ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely verstring= ;; *) verstring="0.0" ;; esac if test "$need_version" = no; then versuffix= else versuffix=".0.0" fi fi # Remove version info from name if versioning should be avoided if test "$avoid_version" = yes && test "$need_version" = no; then major= versuffix= verstring="" fi # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then func_warning "undefined symbols not allowed in $host shared libraries" build_libtool_libs=no build_old_libs=yes fi else # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi fi func_generate_dlsyms "$libname" "$libname" "yes" func_append libobjs " $symfileobj" test "X$libobjs" = "X " && libobjs= if test "$opt_mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= tempremovelist=`$ECHO "$output_objdir/*"` for p in $tempremovelist; do case $p in *.$objext | *.gcno) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) if test "X$precious_files_regex" != "X"; then if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 then continue fi fi func_append removelist " $p" ;; *) ;; esac done test -n "$removelist" && \ func_show_eval "${RM}r \$removelist" fi # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then func_append oldlibs " $output_objdir/$libname.$libext" # Transform .lo files to .o files. oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do func_replace_sysroot "$libdir" func_append temp_xrpath " -R$func_replace_sysroot_result" case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened old_dlfiles="$dlfiles" dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; *) func_append dlfiles " $lib" ;; esac done # Make sure dlprefiles contains only unique files old_dlprefiles="$dlprefiles" dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; *) func_append dlprefiles " $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework func_append deplibs " System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work ;; *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then func_append deplibs " -lc" fi ;; esac fi # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname release_save=$release versuffix_save=$versuffix major_save=$major # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? release="" versuffix="" major="" newdeplibs= droppeddeps=no case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just # implementing what was already the behavior. newdeplibs=$deplibs ;; test_compile) # This code stresses the "libraries are programs" paradigm to its # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. $opt_dry_run || $RM conftest.c cat > conftest.c </dev/null` $nocaseglob else potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` fi for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null | $GREP " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then func_append newdeplibs " $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a file magic. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` for a_deplib in $deplibs; do case $a_deplib in -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) func_append newdeplibs " $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then func_append newdeplibs " $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a regex pattern. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` done fi case $tmp_deplibs in *[!\ \ ]*) echo if test "X$deplibs_check_method" = "Xnone"; then echo "*** Warning: inter-library dependencies are not supported in this platform." else echo "*** Warning: inter-library dependencies are not known to be supported." fi echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes ;; esac ;; esac versuffix=$versuffix_save major=$major_save release=$release_save libname=$libname_save name=$name_save case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library with the System framework newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then echo echo "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" echo "*** a static module, that should work as long as the dlopening" echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi else echo "*** The inter-library dependencies that have been dropped here will be" echo "*** automatically added whenever a program is linked with this library" echo "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then echo echo "*** Since this library must not contain undefined symbols," echo "*** because either the platform does not support them or" echo "*** it was explicitly requested with -no-undefined," echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi fi fi # Done checking deplibs! deplibs=$newdeplibs fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" case $host in *-*-darwin*) newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $deplibs " in *" -L$path/$objdir "*) func_append new_libs " -L$path/$objdir" ;; esac ;; esac done for deplib in $deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) func_append new_libs " $deplib" ;; esac ;; *) func_append new_libs " $deplib" ;; esac done deplibs="$new_libs" # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then # Remove ${wl} instances when linking with ld. # FIXME: should test the right _cmds variable. case $archive_cmds in *\$LD\ *) wl= ;; esac if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" test "$opt_mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then func_replace_sysroot "$libdir" libdir=$func_replace_sysroot_result if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append dep_rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) func_append perm_rpath " $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do func_append rpath "$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi shlibpath="$finalize_shlibpath" test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi # Get the real and link names of the library. eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names shift realname="$1" shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname="$realname" fi if test -z "$dlname"; then dlname=$soname fi lib="$output_objdir/$realname" linknames= for link do func_append linknames " $link" done # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` test "X$libobjs" = "X " && libobjs= delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" export_symbols="$output_objdir/$libname.uexp" func_append delfiles " $export_symbols" fi orig_export_symbols= case $host_os in cygwin* | mingw* | cegcc*) if test -n "$export_symbols" && test -z "$export_symbols_regex"; then # exporting using user supplied symfile if test "x`$SED 1q $export_symbols`" != xEXPORTS; then # and it's NOT already a .def file. Must figure out # which of the given symbols are data symbols and tag # them as such. So, trigger use of export_symbols_cmds. # export_symbols gets reassigned inside the "prepare # the list of exported symbols" if statement, so the # include_expsyms logic still works. orig_export_symbols="$export_symbols" export_symbols= always_export_symbols=yes fi fi ;; esac # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' for cmd1 in $cmds; do IFS="$save_ifs" # Take the normal branch if the nm_file_list_spec branch # doesn't work or if tool conversion is not needed. case $nm_file_list_spec~$to_tool_file_cmd in *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) try_normal_branch=yes eval cmd=\"$cmd1\" func_len " $cmd" len=$func_len_result ;; *) try_normal_branch=no ;; esac if test "$try_normal_branch" = yes \ && { test "$len" -lt "$max_cmd_len" \ || test "$max_cmd_len" -le -1; } then func_show_eval "$cmd" 'exit $?' skipped_export=false elif test -n "$nm_file_list_spec"; then func_basename "$output" output_la=$func_basename_result save_libobjs=$libobjs save_output=$output output=${output_objdir}/${output_la}.nm func_to_tool_file "$output" libobjs=$nm_file_list_spec$func_to_tool_file_result func_append delfiles " $output" func_verbose "creating $NM input file list: $output" for obj in $save_libobjs; do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" done > "$output" eval cmd=\"$cmd1\" func_show_eval "$cmd" 'exit $?' output=$save_output libobjs=$save_libobjs skipped_export=false else # The command line is too long to execute in one step. func_verbose "using reloadable object file for export list..." skipped_export=: # Break out early, otherwise skipped_export may be # set to false by a later but shorter cmd. break fi done IFS="$save_ifs" if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi tmp_deplibs= for test_deplib in $deplibs; do case " $convenience " in *" $test_deplib "*) ;; *) func_append tmp_deplibs " $test_deplib" ;; esac done deplibs="$tmp_deplibs" if test -n "$convenience"; then if test -n "$whole_archive_flag_spec" && test "$compiler_needs_object" = yes && test -z "$libobjs"; then # extract the archives, so we have objects to list. # TODO: could optimize this to just extract one archive. whole_archive_flag_spec= fi if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= else gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $convenience func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" func_append linker_flags " $flag" fi # Make a backup of the uninstalled library when relinking if test "$opt_mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then eval test_cmds=\"$module_expsym_cmds\" cmds=$module_expsym_cmds else eval test_cmds=\"$module_cmds\" cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval test_cmds=\"$archive_expsym_cmds\" cmds=$archive_expsym_cmds else eval test_cmds=\"$archive_cmds\" cmds=$archive_cmds fi fi if test "X$skipped_export" != "X:" && func_len " $test_cmds" && len=$func_len_result && test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else # The command line is too long to link in one step, link piecewise # or, if using GNU ld and skipped_export is not :, use a linker # script. # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we # want to use save_libobjs as it was before # whole_archive_flag_spec was expanded, because we can't # assume the linker understands whole_archive_flag_spec. # This may have to be revisited, in case too many # convenience libraries get linked in and end up exceeding # the spec. if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then save_libobjs=$libobjs fi save_output=$output func_basename "$output" output_la=$func_basename_result # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= last_robj= k=1 if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then output=${output_objdir}/${output_la}.lnkscript func_verbose "creating GNU ld script: $output" echo 'INPUT (' > $output for obj in $save_libobjs do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" >> $output done echo ')' >> $output func_append delfiles " $output" func_to_tool_file "$output" output=$func_to_tool_file_result elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then output=${output_objdir}/${output_la}.lnk func_verbose "creating linker input file list: $output" : > $output set x $save_libobjs shift firstobj= if test "$compiler_needs_object" = yes; then firstobj="$1 " shift fi for obj do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" >> $output done func_append delfiles " $output" func_to_tool_file "$output" output=$firstobj\"$file_list_spec$func_to_tool_file_result\" else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." output=$output_objdir/$output_la-${k}.$objext eval test_cmds=\"$reload_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 # Loop over the list of objects to be linked. for obj in $save_libobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result if test "X$objlist" = X || test "$len" -lt "$max_cmd_len"; then func_append objlist " $obj" else # The command $test_cmds is almost too long, add a # command to the queue. if test "$k" -eq 1 ; then # The first file doesn't have a previous command to add. reload_objs=$objlist eval concat_cmds=\"$reload_cmds\" else # All subsequent reloadable object files will link in # the last one created. reload_objs="$objlist $last_robj" eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" fi last_robj=$output_objdir/$output_la-${k}.$objext func_arith $k + 1 k=$func_arith_result output=$output_objdir/$output_la-${k}.$objext objlist=" $obj" func_len " $last_robj" func_arith $len0 + $func_len_result len=$func_arith_result fi done # Handle the remaining objects by creating one last # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ reload_objs="$objlist $last_robj" eval concat_cmds=\"\${concat_cmds}$reload_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" fi func_append delfiles " $output" else output= fi if ${skipped_export-false}; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols libobjs=$output # Append the command to create the export file. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi fi test -n "$save_libobjs" && func_verbose "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. save_ifs="$IFS"; IFS='~' for cmd in $concat_cmds; do IFS="$save_ifs" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$opt_mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" if test -n "$export_symbols_regex" && ${skipped_export-false}; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi if ${skipped_export-false}; then if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi fi libobjs=$output # Restore the value of output. output=$save_output if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then cmds=$module_expsym_cmds else cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then cmds=$archive_expsym_cmds else cmds=$archive_cmds fi fi fi if test -n "$delfiles"; then # Append the command to remove temporary files to $cmds. eval cmds=\"\$cmds~\$RM $delfiles\" fi # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $dlprefiles func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$opt_mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$opt_mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then if test -z "$whole_archive_flag_spec"; then func_show_eval '${RM}r "$gentop"' fi fi exit $EXIT_SUCCESS fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' fi done # If -module or -export-dynamic was specified, set the dlname. if test "$module" = yes || test "$export_dynamic" = yes; then # On all known operating systems, these are identical. dlname="$soname" fi fi ;; obj) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for objects" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for objects" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for objects" test -n "$xrpath" && \ func_warning "\`-R' is ignored for objects" test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for objects" test -n "$release" && \ func_warning "\`-release' is ignored for objects" case $output in *.lo) test -n "$objs$old_deplibs" && \ func_fatal_error "cannot build library object \`$output' from non-libtool objects" libobj=$output func_lo2o "$libobj" obj=$func_lo2o_result ;; *) libobj= obj="$output" ;; esac # Delete the old objects. $opt_dry_run || $RM $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create # different ones for PIC/non-PIC, this we'll have to duplicate # the extraction. reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec and hope we can get by with # turning comma into space.. wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` else gentop="$output_objdir/${obj}x" func_append generated " $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi # If we're not building shared, we need to use non_pic_objs test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" # Create the old-style object. reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" func_execute_cmds "$reload_cmds" 'exit $?' # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS fi if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" func_execute_cmds "$reload_cmds" 'exit $?' fi if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS ;; prog) case $host in *cygwin*) func_stripname '' '.exe' "$output" output=$func_stripname_result.exe;; esac test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for programs" test -n "$release" && \ func_warning "\`-release' is ignored for programs" test "$preload" = yes \ && test "$dlopen_support" = unknown \ && test "$dlopen_self" = unknown \ && test "$dlopen_self_static" = unknown && \ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac case $host in *-*-darwin*) # Don't allow lazy linking, it breaks C++ global constructors # But is supposedly fixed on 10.4 or later (yay!). if test "$tagname" = CXX ; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) func_append compile_command " ${wl}-bind_at_load" func_append finalize_command " ${wl}-bind_at_load" ;; esac fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $compile_deplibs " in *" -L$path/$objdir "*) func_append new_libs " -L$path/$objdir" ;; esac ;; esac done for deplib in $compile_deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) func_append new_libs " $deplib" ;; esac ;; *) func_append new_libs " $deplib" ;; esac done compile_deplibs="$new_libs" func_append compile_command " $compile_deplibs" func_append finalize_command " $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac done fi # Now hardcode the library paths rpath= hardcode_libdirs= for libdir in $compile_rpath $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) func_append perm_rpath " $libdir" ;; esac fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; *) func_append dllsearchpath ":$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi compile_rpath="$rpath" rpath= hardcode_libdirs= for libdir in $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; *) func_append finalize_perm_rpath " $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi finalize_rpath="$rpath" if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` fi func_generate_dlsyms "$outputname" "@PROGRAM@" "no" # template prelinking step if test -n "$prelink_cmds"; then func_execute_cmds "$prelink_cmds" 'exit $?' fi wrappers_required=yes case $host in *cegcc* | *mingw32ce*) # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. wrappers_required=no ;; *cygwin* | *mingw* ) if test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; *) if test "$need_relink" = no || test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; esac if test "$wrappers_required" = no; then # Replace the output file specification. compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. exit_status=0 func_show_eval "$link_command" 'exit_status=$?' if test -n "$postlink_cmds"; then func_to_tool_file "$output" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi # Delete the generated files. if test -f "$output_objdir/${outputname}S.${objext}"; then func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' fi exit $exit_status fi if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi compile_var= finalize_var= if test -n "$runpath_var"; then if test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do func_append rpath "$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi if test -n "$finalize_perm_rpath"; then # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do func_append rpath "$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi fi if test "$no_install" = yes; then # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $opt_dry_run || $RM $output # Link the executable and exit func_show_eval "$link_command" 'exit $?' if test -n "$postlink_cmds"; then func_to_tool_file "$output" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi exit $EXIT_SUCCESS fi if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" func_warning "this platform does not like uninstalled shared libraries" func_warning "\`$output' will be relinked during installation" else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= fi else link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" fi fi # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname func_show_eval "$link_command" 'exit $?' if test -n "$postlink_cmds"; then func_to_tool_file "$output_objdir/$outputname" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi # Now create the wrapper script. func_verbose "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` fi # Only actually do things if not in dry run mode. $opt_dry_run || { # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in *.exe) func_stripname '' '.exe' "$output" output=$func_stripname_result ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe func_stripname '' '.exe' "$outputname" outputname=$func_stripname_result ;; *) exeext= ;; esac case $host in *cygwin* | *mingw* ) func_dirname_and_basename "$output" "" "." output_name=$func_basename_result output_path=$func_dirname_result cwrappersource="$output_path/$objdir/lt-$output_name.c" cwrapper="$output_path/$output_name.exe" $RM $cwrappersource $cwrapper trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 func_emit_cwrapperexe_src > $cwrappersource # The wrapper executable is built using the $host compiler, # because it contains $host paths and files. If cross- # compiling, it, like the target executable, must be # executed on the $host or under an emulation environment. $opt_dry_run || { $LTCC $LTCFLAGS -o $cwrapper $cwrappersource $STRIP $cwrapper } # Now, create the wrapper script for func_source use: func_ltwrapper_scriptname $cwrapper $RM $func_ltwrapper_scriptname_result trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 $opt_dry_run || { # note: this script will not be executed, so do not chmod. if test "x$build" = "x$host" ; then $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result else func_emit_wrapper no > $func_ltwrapper_scriptname_result fi } ;; * ) $RM $output trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 func_emit_wrapper no > $output chmod +x $output ;; esac } exit $EXIT_SUCCESS ;; esac # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then oldobjs="$libobjs_save $symfileobj" addlibs="$convenience" build_libtool_libs=no else if test "$build_libtool_libs" = module; then oldobjs="$libobjs_save" build_libtool_libs=no else oldobjs="$old_deplibs $non_pic_objects" if test "$preload" = yes && test -f "$symfileobj"; then func_append oldobjs " $symfileobj" fi fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $addlibs func_append oldobjs " $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then cmds=$old_archive_from_new_cmds else # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_extract_archives $gentop $dlprefiles func_append oldobjs " $func_extract_archives_result" fi # POSIX demands no paths to be encoded in archives. We have # to avoid creating archives with duplicate basenames if we # might have to extract them afterwards, e.g., when creating a # static archive out of a convenience library, or when linking # the entirety of a libtool archive into another (currently # not supported by libtool). if (for obj in $oldobjs do func_basename "$obj" $ECHO "$func_basename_result" done | sort | sort -uc >/dev/null 2>&1); then : else echo "copying selected object files to avoid basename conflicts..." gentop="$output_objdir/${outputname}x" func_append generated " $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs oldobjs= counter=1 for obj in $save_oldobjs do func_basename "$obj" objbase="$func_basename_result" case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) while :; do # Make sure we don't pick an alternate name that also # overlaps. newobj=lt$counter-$objbase func_arith $counter + 1 counter=$func_arith_result case " $oldobjs " in *[\ /]"$newobj "*) ;; *) if test ! -f "$gentop/$newobj"; then break; fi ;; esac done func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" func_append oldobjs " $gentop/$newobj" ;; *) func_append oldobjs " $obj" ;; esac done fi func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 tool_oldlib=$func_to_tool_file_result eval cmds=\"$old_archive_cmds\" func_len " $cmds" len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds elif test -n "$archiver_list_spec"; then func_verbose "using command file archive linking..." for obj in $oldobjs do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" done > $output_objdir/$libname.libcmd func_to_tool_file "$output_objdir/$libname.libcmd" oldobjs=" $archiver_list_spec$func_to_tool_file_result" cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts func_verbose "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs oldobjs= # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do last_oldobj=$obj done eval test_cmds=\"$old_archive_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 for obj in $save_oldobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result func_append objlist " $obj" if test "$len" -lt "$max_cmd_len"; then : else # the above command should be used before it gets too long oldobjs=$objlist if test "$obj" = "$last_oldobj" ; then RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" objlist= len=$len0 fi done RANLIB=$save_RANLIB oldobjs=$objlist if test "X$oldobjs" = "X" ; then eval cmds=\"\$concat_cmds\" else eval cmds=\"\$concat_cmds~\$old_archive_cmds\" fi fi fi func_execute_cmds "$cmds" 'exit $?' done test -n "$generated" && \ func_show_eval "${RM}r$generated" # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" func_verbose "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` if test "$hardcode_automatic" = yes ; then relink_command= fi # Only create the output if not a dry run. $opt_dry_run || { for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then break fi output="$output_objdir/$outputname"i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) func_basename "$deplib" name="$func_basename_result" func_resolve_sysroot "$deplib" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" ;; -L*) func_stripname -L '' "$deplib" func_replace_sysroot "$func_stripname_result" func_append newdependency_libs " -L$func_replace_sysroot_result" ;; -R*) func_stripname -R '' "$deplib" func_replace_sysroot "$func_stripname_result" func_append newdependency_libs " -R$func_replace_sysroot_result" ;; *) func_append newdependency_libs " $deplib" ;; esac done dependency_libs="$newdependency_libs" newdlfiles= for lib in $dlfiles; do case $lib in *.la) func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" ;; *) func_append newdlfiles " $lib" ;; esac done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in *.la) # Only pass preopened files to the pseudo-archive (for # eventual linking with the app. that links it) if we # didn't already link the preopened objects directly into # the library: func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" ;; esac done dlprefiles="$newdlprefiles" else newdlfiles= for lib in $dlfiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlfiles " $abs" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlprefiles " $abs" done dlprefiles="$newdlprefiles" fi $RM $output # place dlname in correct position for cygwin # In fact, it would be nice if we could use this code for all target # systems that can't hard-code library paths into their executables # and that have no shared library path variable independent of PATH, # but it turns out we can't easily determine that from inspecting # libtool variables, so we have to hard-code the OSs to which it # applies here; at the moment, that means platforms that use the PE # object format with DLL files. See the long comment at the top of # tests/bindir.at for full details. tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) # If a -bindir argument was supplied, place the dll there. if test "x$bindir" != x ; then func_relative_path "$install_libdir" "$bindir" tdlname=$func_relative_path_result$dlname else # Otherwise fall back on heuristic. tdlname=../bin/$dlname fi ;; esac $ECHO > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='$tdlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Linker flags that can not go in dependency_libs. inherited_linker_flags='$new_inherited_linker_flags' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Names of additional weak libraries provided by this library weak_library_names='$weak_libs' # Version information for $libname. current=$current age=$age revision=$revision # Is this an already installed library? installed=$installed # Should we warn about portability when linking against -modules? shouldnotlink=$module # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test "$installed" = no && test "$need_relink" = yes; then $ECHO >> $output "\ relink_command=\"$relink_command\"" fi done } # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ;; esac exit $EXIT_SUCCESS } { test "$opt_mode" = link || test "$opt_mode" = relink; } && func_mode_link ${1+"$@"} # func_mode_uninstall arg... func_mode_uninstall () { $opt_debug RM="$nonopt" files= rmforce= exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" for arg do case $arg in -f) func_append RM " $arg"; rmforce=yes ;; -*) func_append RM " $arg" ;; *) func_append files " $arg" ;; esac done test -z "$RM" && \ func_fatal_help "you must specify an RM program" rmdirs= for file in $files; do func_dirname "$file" "" "." dir="$func_dirname_result" if test "X$dir" = X.; then odir="$objdir" else odir="$dir/$objdir" fi func_basename "$file" name="$func_basename_result" test "$opt_mode" = uninstall && odir="$dir" # Remember odir for removal later, being careful to avoid duplicates if test "$opt_mode" = clean; then case " $rmdirs " in *" $odir "*) ;; *) func_append rmdirs " $odir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. if { test -L "$file"; } >/dev/null 2>&1 || { test -h "$file"; } >/dev/null 2>&1 || test -f "$file"; then : elif test -d "$file"; then exit_status=1 continue elif test "$rmforce" = yes; then continue fi rmfiles="$file" case $name in *.la) # Possibly a libtool archive, so verify it. if func_lalib_p "$file"; then func_source $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do func_append rmfiles " $odir/$n" done test -n "$old_library" && func_append rmfiles " $odir/$old_library" case "$opt_mode" in clean) case " $library_names " in *" $dlname "*) ;; *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; esac test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. ;; esac fi ;; *.lo) # Possibly a libtool object, so verify it. if func_lalib_p "$file"; then # Read the .lo file func_source $dir/$name # Add PIC object to the list of files to remove. if test -n "$pic_object" && test "$pic_object" != none; then func_append rmfiles " $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" && test "$non_pic_object" != none; then func_append rmfiles " $dir/$non_pic_object" fi fi ;; *) if test "$opt_mode" = clean ; then noexename=$name case $file in *.exe) func_stripname '' '.exe' "$file" file=$func_stripname_result func_stripname '' '.exe' "$name" noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe func_append rmfiles " $file" ;; esac # Do a test to see if this is a libtool program. if func_ltwrapper_p "$file"; then if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" relink_command= func_source $func_ltwrapper_scriptname_result func_append rmfiles " $func_ltwrapper_scriptname_result" else relink_command= func_source $dir/$noexename fi # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles func_append rmfiles " $odir/$name $odir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then func_append rmfiles " $odir/lt-$name" fi if test "X$noexename" != "X$name" ; then func_append rmfiles " $odir/lt-${noexename}.c" fi fi fi ;; esac func_show_eval "$RM $rmfiles" 'exit_status=1' done # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then func_show_eval "rmdir $dir >/dev/null 2>&1" fi done exit $exit_status } { test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && func_mode_uninstall ${1+"$@"} test -z "$opt_mode" && { help="$generic_help" func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ func_fatal_help "invalid operation mode \`$opt_mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" exit $EXIT_FAILURE fi exit $exit_status # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support # them. This is particularly important on AIX, because we don't # support having both static and shared libraries enabled at the same # time on that platform, so we default to a shared-only configuration. # If a disable-shared tag is given, we'll fallback to a static-only # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared build_libtool_libs=no build_old_libs=yes # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: # vi:sw=2 gpicview-0.2.4/install-sh0000755000000000000000000003325512231706055012236 00000000000000#!/bin/sh # install - install a program, script, or datafile scriptversion=2011-11-20.07; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. nl=' ' IFS=" "" $nl" # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} if test -z "$doit"; then doit_exec=exec else doit_exec=$doit fi # Put in absolute file names if you don't have them in your path; # or use environment vars. chgrpprog=${CHGRPPROG-chgrp} chmodprog=${CHMODPROG-chmod} chownprog=${CHOWNPROG-chown} cmpprog=${CMPPROG-cmp} cpprog=${CPPROG-cp} mkdirprog=${MKDIRPROG-mkdir} mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} posix_glob='?' initialize_posix_glob=' test "$posix_glob" != "?" || { if (set -f) 2>/dev/null; then posix_glob= else posix_glob=: fi } ' posix_mkdir= # Desired mode of installed file. mode=0755 chgrpcmd= chmodcmd=$chmodprog chowncmd= mvcmd=$mvprog rmcmd="$rmprog -f" stripcmd= src= dst= dir_arg= dst_arg= copy_on_change=false no_target_directory= usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: --help display this help and exit. --version display version info and exit. -c (ignored) -C install only if different (preserve the last data modification time) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -s $stripprog installed files. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test $# -ne 0; do case $1 in -c) ;; -C) copy_on_change=true;; -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 case $mode in *' '* | *' '* | *' '* | *'*'* | *'?'* | *'['*) echo "$0: invalid mode: $mode" >&2 exit 1;; esac shift;; -o) chowncmd="$chownprog $2" shift;; -s) stripcmd=$stripprog;; -t) dst_arg=$2 # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac shift;; -T) no_target_directory=true;; --version) echo "$0 $scriptversion"; exit $?;; --) shift break;; -*) echo "$0: invalid option: $1" >&2 exit 1;; *) break;; esac shift done if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dst_arg" shift # fnord fi shift # arg dst_arg=$arg # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac done fi if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call 'install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then do_exit='(exit $ret); exit $ret' trap "ret=129; $do_exit" 1 trap "ret=130; $do_exit" 2 trap "ret=141; $do_exit" 13 trap "ret=143; $do_exit" 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. case $mode in # Optimize common cases. *644) cp_umask=133;; *755) cp_umask=22;; *[0-7]) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac fi for src do # Protect names problematic for 'test' and other utilities. case $src in -* | [=\(\)!]) src=./$src;; esac if test -n "$dir_arg"; then dst=$src dstdir=$dst test -d "$dstdir" dstdir_status=$? else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dst_arg # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else # Prefer dirname, but fall back on a substitute if dirname fails. dstdir=` (dirname "$dst") 2>/dev/null || expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$dst" : 'X\(//\)[^/]' \| \ X"$dst" : 'X\(//\)$' \| \ X"$dst" : 'X\(/\)' \| . 2>/dev/null || echo X"$dst" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q' ` test -d "$dstdir" dstdir_status=$? fi fi obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') # Create intermediate dirs using mode 755 as modified by the umask. # This is like FreeBSD 'install' as of 1997-10-28. umask=`umask` case $stripcmd.$umask in # Optimize common cases. *[2367][2367]) mkdir_umask=$umask;; .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; *[0-7]) mkdir_umask=`expr $umask + 22 \ - $umask % 100 % 40 + $umask % 20 \ - $umask % 10 % 4 + $umask % 2 `;; *) mkdir_umask=$umask,go-w;; esac # With -d, create the new directory with the user-specified mode. # Otherwise, rely on $mkdir_umask. if test -n "$dir_arg"; then mkdir_mode=-m$mode else mkdir_mode= fi posix_mkdir=false case $umask in *[123567][0-7][0-7]) # POSIX mkdir -p sets u+wx bits regardless of umask, which # is incompatible with FreeBSD 'install' when (umask & 300) != 0. ;; *) tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 if (umask $mkdir_umask && exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. ls_ld_tmpdir=`ls -ld "$tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && $mkdirprog -m$different_mode -p -- "$tmpdir" && { ls_ld_tmpdir_1=`ls -ld "$tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi rmdir "$tmpdir/d" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null fi trap '' 0;; esac;; esac if $posix_mkdir && ( umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else # The umask is ridiculous, or mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix='/';; [-=\(\)!]*) prefix='./';; *) prefix='';; esac eval "$initialize_posix_glob" oIFS=$IFS IFS=/ $posix_glob set -f set fnord $dstdir shift $posix_glob set +f IFS=$oIFS prefixes= for d do test X"$d" = X && continue prefix=$prefix$d if test -d "$prefix"; then prefixes= else if $posix_mkdir; then (umask=$mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else case $prefix in *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *) qprefix=$prefix;; esac prefixes="$prefixes '$qprefix'" fi fi prefix=$prefix/ done if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. (umask $mkdir_umask && eval "\$doit_exec \$mkdirprog $prefixes") || test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi fi if test -n "$dir_arg"; then { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && eval "$initialize_posix_glob" && $posix_glob set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && $posix_glob set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then rm -f "$dsttmp" else # Rename the file to the real destination. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. { # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { test ! -f "$dst" || $doit $rmcmd -f "$dst" 2>/dev/null || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } } || { echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 trap '' 0 fi done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: gpicview-0.2.4/INSTALL0000644000000000000000000001547212231705732011265 00000000000000Basic Installation ================== These are generic installation instructions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, a file `config.cache' that saves the results of its tests to speed up reconfiguring, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.in' is used to create `configure' by a program called `autoconf'. You only need `configure.in' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. If you're using `csh' on an old version of System V, you might need to type `sh ./configure' instead to prevent `csh' from trying to execute `configure' itself. Running `configure' takes a while. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Type `make install' to install the programs and any data files and documentation. 4. You can remove the program binaries and object files from the source code directory by typing `make clean'. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. You can give `configure' initial values for variables by setting them in the environment. Using a Bourne-compatible shell, you can do that on the command line like this: CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure Or on systems that have the `env' program, you can do it like this: env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. If you have to use a `make' that does not supports the `VPATH' variable, you have to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. Installation Names ================== By default, `make install' will install the package's files in `/usr/local/bin', `/usr/local/man', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PATH'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you give `configure' the option `--exec-prefix=PATH', the package will use PATH as the prefix for installing programs and libraries. Documentation and other data files will still use the regular prefix. If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Optional Features ================= Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. For packages that use the X Window System, `configure' can usually find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. Specifying the System Type ========================== There may be some features `configure' can not figure out automatically, but needs to determine by the type of host the package will run on. Usually `configure' can figure that out, but if it prints a message saying it can not guess the host type, give it the `--host=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name with three fields: CPU-COMPANY-SYSTEM See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the host type. If you are building compiler tools for cross-compiling, you can also use the `--target=TYPE' option to select the type of system they will produce code for and the `--build=TYPE' option to select the type of system on which you are compiling the package. Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. Operation Controls ================== `configure' recognizes the following options to control how it operates. `--cache-file=FILE' Use and save the results of the tests in FILE instead of `./config.cache'. Set FILE to `/dev/null' to disable caching, for debugging `configure'. `--help' Print a summary of the options to `configure', and exit. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `--version' Print the version of Autoconf used to generate the `configure' script, and exit. `configure' also accepts some other, not widely useful, options. gpicview-0.2.4/gpicview.desktop.in0000644000000000000000000000100112231705732014030 00000000000000[Desktop Entry] Encoding=UTF-8 Categories=Graphics;Utility;Core;GTK;Viewer;RasterGraphics;2DGraphics;Photography; Exec=gpicview %f Icon=gpicview StartupNotify=true Type=Application Terminal=false MimeType=image/bmp;image/gif;image/jpeg;image/jpg;image/png;image/tiff;image/x-bmp;image/x-pcx;image/x-tga;image/x-portable-pixmap;image/x-portable-bitmap;image/x-targa;image/x-portable-greymap;application/pcx;image/svg+xml;image/svg-xml; _Name=Image Viewer _GenericName=Image Viewer _Comment=View your images easily gpicview-0.2.4/README0000644000000000000000000000000012231705732011071 00000000000000gpicview-0.2.4/TODO0000644000000000000000000000000012231705732010701 00000000000000gpicview-0.2.4/po/0000755000000000000000000000000012231706136010720 500000000000000gpicview-0.2.4/po/frp.po0000644000000000000000000001411112231705732011766 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2009-10-21 16:01+0200\n" "Last-Translator: alexandre raymond \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: Pootle 1.1.0\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr " [FICHÈR]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Afichór d'imajes" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Precedènta" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Segrènta" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Vére fora" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Vére prés" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Talyi d'origina" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Plèn ecran" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Virèr a gauchi" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Virèr a dreti" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Revirèr horizontal" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Revirèr vertical" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Uvrir un fichèr" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Sauvar lo fichèr" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Sauvar lo fichèr coma" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Dotar lo fichèr" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Preferences" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Modar" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Lo nom de fichèr existe ja.\n" "Ehcrire dessus cetî fichèr?\n" "(Atencion: la qualitâ de l'imaji originala pòt ehtre perdûyi)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Ehcrire dins cetî formât d'imaji n'eht pas possiblo." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Siórd de dotar l'imaji actuèla?\n" "\n" "Atencion: Na vés que l'imaji eht ehta dotâyi, n'eht pâs més possiblo de " "tornar a la trovar!" #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Sauvar coma" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Vére la sorci de EOG image viewer é GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "Alexandre Raymond " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Dret de Copiar - Copyrighy (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Mohtrór d'imajes legèr per lo projeyt LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "" gpicview-0.2.4/po/bg.po0000644000000000000000000002065612231705732011602 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: gpicview\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-09-30 08:27+0200\n" "Last-Translator: РадоÑлав \n" "Language-Team: MIME-Version: 1.0\n" "Language: bg\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.0.5\n" "X-Poedit-Language: Bulgarian\n" "X-Poedit-Country: BULGARIA\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[ФÐЙЛ]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Отпечатай верÑиÑта на програмата и излез" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Стартирай Ñлайдшоу" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Изобразител" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Предишна" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Следваща" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Стартирай Слайдшоу" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "ÐамалÑване" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Увеличаване" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "ÐапаÑва изображението до размера на прозореца" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Оригинален размер" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Ð’ цÑл екран" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Завърти обратно на чаÑовниковата Ñтрелка" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Завърти по чаÑовниковата Ñтрелка" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Хоризонтално завъртане" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Вертикално завъртане" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Отвори файл" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Запази файл" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Запази файла като..." #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Изтрий файл" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "ПредпочитаниÑ" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Изход" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Спри Ñлайдшоуто" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Избраното име на файл вече ÑъщеÑтвува.\n" "ИÑкате ли да презапишете ÑъщеÑÑ‚Ð²ÑƒÐ²Ð°ÑˆÐ¸Ñ Ñ„Ð°Ð¹Ð»?\n" "(Внимание: качеÑтвото на оргиналното изображение може да Ñе загуби)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Ð—Ð°Ð¿Ð¸Ñ Ð½Ð° изображението в този формат е неоÑъщеÑтвим." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Сигурни ли Ñте, иÑкате да изтриете Ñ‚ÐµÐºÑƒÑ‰Ð¸Ñ Ñ„Ð°Ð¹Ð»?\n" "\n" "Внимание: веднъж изтрит, файла не може да Ñе възÑтанови." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "ПуÑни/Спри Ñлайдшоу" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Запази като" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Показване/Скриване на полето Ñ Ð¸Ð½Ñтрументи" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr "* ПотърÑи изходен код за EOG изобразител и GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "РадоÑлав Иванов" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright © 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Lightweight изобразител от LXDE проекта" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView ще бъде Ð¸Ð·Ð¾Ð±Ñ€Ð°Ð·Ð¸Ñ‚ÐµÐ»Ñ Ð¿Ð¾ подразбиране за вÑички поддържани файлове " "на вашата ÑиÑтема.\n" "(Това ще Ñе изпълни чрез 'xdg-mime')\n" "\n" " Сигурни ли Ñте, че иÑкате да продължите? " #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Ð’Ñички поддържани формати" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Ð’Ñички файлове" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG качеÑтво:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "По-ниÑките ÑтойноÑти за качеÑтво намÑлат размера на файла,\n" "но и качеÑтвото на Ñнимката ще е по-бедно." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG ниво на компреÑиÑ:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "По-голÑмата компреÑÐ°Ñ†Ð¸Ñ Ð·Ð°ÐµÐ¼Ð° по-малко мÑÑто,\n" "но ще отнеме извеÑтно време." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Плавен преглед на вашите Ñнимки" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Запитай преди запаметÑване на Ñнимки" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Запитай преди изтриване на Ñнимки" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Запамети автоматично, завъртÑните Ñнимки" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Завърти JPEG файл чрез промÑна на EXIF ориентациÑта\n" "(ЕдинÑтвено ако ÑъщеÑтвува EXIF позициÑ)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Изчакване в Слайдшоуто" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "Сек." #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Ðаправи GPicView изобразител по подразбиране" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Ðормално:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Ðа цÑл екран" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Цветове за фона" gpicview-0.2.4/po/fa.po0000644000000000000000000002035712231705732011576 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2010-07-06 06:54+0200\n" "Last-Translator: Hamidreza \n" "Language-Team: LANGUAGE \n" "Language: fa\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Pootle 2.0.1\n" # we don't have these symbols([]) in persian keyboard :? #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[FILE]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "اطلاعات نسخه را چاپ کرده Ùˆ خارج شو" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "شروع نمایش پرده ای" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "نمایشگر تصویر" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "قبلی" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "بعدی" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "شروع در نمایش پرده‌ای" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Ú©ÙˆÚ†Ú© نمایی" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "بزرگ نمایی" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "تنظیم به اندازه‌ی پنجره" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "اندازه اصلی" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "تمام صÙحه" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "چرخش پادساعتگرد" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "چرخش ساعتگرد" # i translate this to "change to hor." . # is it true ? # تغییر=change #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "چرخش اÙÙ‚ÛŒ" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "چرخش عمودی" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "باز کردن پرونده" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "ذخیره پرونده" #: ../src/main-win.c:304 msgid "Save File As" msgstr "ذخیره با عنوان" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "حذ٠پرونده" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "تنظیمات" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "خروج" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "توق٠نماش پرده ای" # after saving the [new line] (/n) gets lost ! #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Ùایلی Ú©Ù‡ انتخاب کرده اید وجود دارد.\n" "آیا Ù…ÛŒ خواهید بر روی Ùایل موجود رونویسی کنید؟\n" "(اخطار: ممکن است Ú©ÛŒÙیت تصویر واقعی از بین برود)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "این نوع Ùرمت تصویری پشتیبانی نمی شود." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "آیا مطمئنید Ú©Ù‡ Ù…ÛŒ خواهید Ùایل Ùعلی را حذ٠کنید؟\n" "\n" "اخطار: یکبار حذ٠کردن یک عمر پشیمانی Ùˆ بازگشت غیر ممکن." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "شروع/پایان نمایش پرده ای" #: ../src/main-win.c:1456 msgid "Save As" msgstr "ذخیره با عنوان" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" # And so. # This is another problem for tanslators ;) # what should i do with these Names? #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * ارجاع داده Ù…ÛŒ شود به سورس هایEOG image viewer Ùˆ GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "ترجمه کنندگان" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "جی‌پیک‌ویو" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Ú©Ù¾ÛŒ رایت(c) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "نمایشگر تصویر سبک وزن پروژه ÛŒ LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "جی‌پیک‌ویو نمایشگر تصویرهای پشتیبانی شده در سیستم شما خواهد شد.\n" "(این کار بواسطه ÛŒ ابزار 'xdg-mime' انجام خواهد شد)\n" "\n" "آیا واقعا Ù…ÛŒ خواهید این کار را انجام بدهید؟" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "همه ÛŒ تصاویر پشتیبانی شده" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "همه ÛŒ Ùایل ها" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "Ú©ÛŒÙیت تصویرJPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Ú©ÛŒÙیت Ú©Ù… تصویر باعث Ú©ÙˆÚ†Ú© شدن اندازه ÛŒ Ùایل Ù…ÛŒ شود،\n" " اما تصویر موردنظر Ú©Ù… Ú©ÛŒÙیت تر خواهد شد." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "سطح تراکمی Ùˆ Ùشردگی اندازه تصویر PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "بالا بردن سطح تراکم باعث Ú©ÙˆÚ†Ú© شدن اندازه ÛŒ Ùایل های Ù…ÛŒ شود, \n" "اما اینکار وقت بیشتری را Ù…ÛŒ طلبد." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "نگاهی سریع Ùˆ آسان" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "پیش از ذخیره ÛŒ تصاویر بپرس" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "پیش از پاک کردن تصاویر ØŒ بپرس" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "چرخش دورانی خودکار عکس ها" # I don't know what the EXIF is . #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "چرخش JPEG با تغییر جهت یابی مقدار EXIF \n" "(Ùقط در صورت وجود برچسب گرایش EXIF )" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "نمایش پرده ای زمان دار" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "ثانیه" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "نرم اÙزار GPicView را نمایشگر عکس پیشÙرض Ú©Ù†" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "معمولی:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "تمام صÙحه:" # should i write down these tags ? # #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "رنگ پس زمینه" gpicview-0.2.4/po/sr.po0000644000000000000000000002131212231705732011624 00000000000000# Serbian translation for GPicView package # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the GPicView package. # Jay A. Fleming , 2009. # # msgid "" msgstr "" "Project-Id-Version: GPicView 0.2.x\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2013-09-05 20:53+0100\n" "Last-Translator: Jay A.Fleming \n" "Language-Team: \n" "Language: sr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[FILE]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "ИÑпиши информације о верзији и изађи" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "ÐутоматÑки покретни приказ" #: ../src/main-win.c:165 #: ../src/main-win.c:1413 #: ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Прегледач Ñлика" #: ../src/main-win.c:267 #: ../src/main-win.c:1438 msgid "Previous" msgstr "Претходна" #: ../src/main-win.c:268 #: ../src/main-win.c:1439 msgid "Next" msgstr "Следећа" #: ../src/main-win.c:269 #: ../src/main-win.c:754 msgid "Start Slideshow" msgstr "ÐутоматÑки покретни приказ" #: ../src/main-win.c:273 #: ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Умањи" #: ../src/main-win.c:274 #: ../src/main-win.c:1443 msgid "Zoom In" msgstr "Увећај" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 #: ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Прилагоди величину Ñлике према прозору" #: ../src/main-win.c:283 #: ../src/main-win.c:1445 msgid "Original Size" msgstr "Оригинална величина Ñлике" #: ../src/main-win.c:290 #: ../src/main-win.c:1447 msgid "Full Screen" msgstr "Прикажи преко целог екрана" #: ../src/main-win.c:294 #: ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Окрени на лево" #: ../src/main-win.c:295 #: ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Окрени на деÑно" #: ../src/main-win.c:297 #: ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Изврни према хоризонтали" #: ../src/main-win.c:298 #: ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Изврни према вертикали" #: ../src/main-win.c:302 #: ../src/main-win.c:1454 msgid "Open File" msgstr "Отвори датотеку" #: ../src/main-win.c:303 #: ../src/main-win.c:1455 msgid "Save File" msgstr "Сачувај датотеку" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Сачувај под другим именом" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 #: ../src/main-win.c:1458 msgid "Delete File" msgstr "Обриши датотеку" #: ../src/main-win.c:308 #: ../src/main-win.c:1460 #: ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "ПоÑтавке" #: ../src/main-win.c:309 #: ../src/main-win.c:1464 msgid "Quit" msgstr "Изађи" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "ЗауÑтави покретни приказ" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Датотека Ñа иÑтим именом већ поÑтоји.\n" "Да ли желите да пишем преко поÑтојеће датотеке?\n" "(УПОЗОРЕЊЕ: Овим можете изгубити на квалитету Ñлике)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Ðије подржан Ð·Ð°Ð¿Ð¸Ñ Ñƒ овом формату." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "ЈеÑте ли Ñигурни да желите обриÑати ову Ñлику?\n" "\n" "УПОЗОРЕЊЕ: КаÑније не можете повратити ову Ñлику." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Покрени/ЗауÑтави покретни приказ" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Сачувај под другим именом" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Прикажи/Сакриј траку Ñа алаткама" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Погледајте изворни код програма „EOG“ и „GThumb“" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "Serbian (sr) — Jay A. Fleming " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "Прегледач Ñлика" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "2007-2011. Ðека права Ñу задржана." #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "ЈедноÑтаван прегледач Ñлика за ЛИкÑ-ДЕ радно окружење" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "Овај програм ће бити подразумевани прегледач Ñлика за подржане Ñлике.\n" "(Ово ће бити оÑтварено поÑредÑтвом „xdg-mime“ програма)\n" "\n" "Да ли заиÑта желите ово да урадите?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Све Ñлике које Ñу подржане" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Све датотеке" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "Квалитет ЈПЕГ Ñлике:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Мања вредноÑÑ‚ за квалитет ће учинити да\n" "датотека буде мање величине, али ће,\n" "у том Ñлучају, квалитет Ñлике бити лошији." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "Ðиво компреÑије ПÐГ Ñлике:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Већи ниво компреÑије ће учинити да датотека\n" "буде мање величине, али ће, у том Ñлучају,\n" "бити потребно више времена за компреÑију." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Лагано прегледање Ñлика" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Питај пре чувања Ñлика" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Питај пре бриÑања Ñлика" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "ÐутоматÑки Ñачувај изокретане Ñлике" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Окрени ЈПЕГ Ñлику према „EXIF“ вредноÑтима\n" "(Ñамо ако „EXIF“ таг за оријентацију Ñлике поÑтоји)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Следећа Ñлика поÑле" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "Ñек." #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "ПоÑтави овај програм за подразумевани прегледач Ñлика" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Ðормално:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Цео екран:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Боје позадине" gpicview-0.2.4/po/POTFILES.in0000644000000000000000000000025512231705732012420 00000000000000# List of source files containing translatable strings. src/gpicview.c src/main-win.c src/pref.c src/file-dlgs.c gpicview.desktop.in [type: gettext/glade]data/pref-dlg.ui gpicview-0.2.4/po/ca.po0000644000000000000000000001602112231705732011564 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2010-01-13 23:01+0200\n" "Last-Translator: Josep Sanchez \n" "Language-Team: LXDE Catalan translators group\n" "Language: ca\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.0.0\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[FITXER]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Mostra informació de la versió i surt" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Inicia la transició" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Visualitzador d'imatges" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Anterior" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Següent" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Inicia la transició" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Apropa" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Allunya" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Ajusta a la finestra" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Mida original" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Pantalla completa" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Rota a l'esquerra" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Rota a la dreta" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Inverteix" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Reflecteix verticalment" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Obre" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Desa" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Anomena i desa..." #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Elimina" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Preferències" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Surt" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Atura la transició" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "El nom seleccionat ja existeix.\n" "Voleu sobreescriure el fitxer existent?\n" "(Atenció: podeu perdre qualitat respecta la imatge original)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "La imatge no es pot guardar en aquest format" #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Esteu segurs d'eliminar aquest fitxer?\n" "\n" "Alerta: un cop eliminat, el fitxer no es podrà recuperar." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Engega/Atura la transició" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Anomena i desa..." #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr "* Basat en el codi font dels visors d'imatges EOG i GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "Crèdits dels traductors" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Visualitzador d'imatges lleuger del projecte LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView sera el vostre visualitzador d'imatges per defecte.\n" "(Això es fara mitjançant el programa 'xdg-mime')\n" "\n" "Esteu segurs que ho voleu fer?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Totels les imatges suportades" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Tots els fitxers" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "Qualitat JPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Amb valors baixos de qualitat tindreu fitxers petits, \n" "tot i això, la qualitat de la imatge serà pitjor." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "Nivell de compressió PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Amb valors alts de compressió tindreu fitxers petits,\n" "però trigarà més temps a fer la compressió." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Visualitzeu les vostres imatges de manera simple" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Pregunta abans de desar imatges" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Pregunta abans de borrar imatges" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Desa automaticament les imatges rotades" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Rota el fitxer JPEG canvian el valor d'orientació EXIF\n" "(només si l'etiqueta EXIF d'orientació existeix)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Intèrval de la transició" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "seg" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Fes el GPicView el meu visualitzador d'imatges predeterminat" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normal:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Pantalla completa:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Colors de fons" gpicview-0.2.4/po/bn.po0000644000000000000000000002335012231705732011603 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # Sadia Afroz , 2010. # msgid "" msgstr "" "Project-Id-Version: bn\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2010-01-31 15:44+0600\n" "Last-Translator: Sadia Afroz \n" "Language-Team: Bengali \n" "Language: bn\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[ফাইল]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "সংসà§à¦•à¦°à¦£ তথà§à¦¯à¦¾à¦¬à¦²à§€ মà§à¦¦à§à¦°à¦£ করে পà§à¦°à¦¸à§à¦¥à¦¾à¦¨ করà§à¦¨" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "সà§à¦²à¦¾à¦‡à¦¡ পà§à¦°à¦¦à¦°à§à¦¶à¦¨ আরমà§à¦­" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "ছবি পà§à¦°à¦¦à¦°à§à¦¶à¦•" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "পূরà§à¦¬à¦¬à¦°à§à¦¤à§€ " #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "পরবরà§à¦¤à§€" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "সà§à¦²à¦¾à¦‡à¦¡ পà§à¦°à¦¦à¦°à§à¦¶à¦¨ আরমà§à¦­" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "ছোট আকারে পà§à¦°à¦¦à¦°à§à¦¶à¦¨" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "বড় আকারে পà§à¦°à¦¦à¦°à§à¦¶à¦¨" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "ছবিকে উইনà§à¦¡à§‹à¦° আকারের সাথে মানানসই করা হবে" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "আদি আকার" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "পরà§à¦¦à¦¾à¦œà§à§œà§‡ পà§à¦°à¦¦à¦°à§à¦¶à¦¨" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "বাম দিকে ঘোরান" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "ডান দিকে ঘোরান" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "অনà§à¦­à§‚মিকভাবে উলà§à¦Ÿà¦¾à¦¨à§‹" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "উলà§à¦²à¦®à§à¦¬à¦­à¦¾à¦¬à§‡ উলà§à¦Ÿà¦¾à¦¨à§‹" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "ফাইল খà§à¦²à§à¦¨" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "ফাইল সংরকà§à¦·à¦£" #: ../src/main-win.c:304 msgid "Save File As" msgstr "ফাইল নতà§à¦¨à¦­à¦¾à¦¬à§‡ সংরকà§à¦·à¦£" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "ফাইল মà§à¦›à§‡ ফেলা হবে" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "পছনà§à¦¦à¦¸à¦®à§‚হ" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "পà§à¦°à¦¸à§à¦¥à¦¾à¦¨" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "সà§à¦²à¦¾à¦‡à¦¡ পà§à¦°à¦¦à¦°à§à¦¶à¦¨ বনà§à¦§" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "আপনি যে ফাইলের নাম নিরà§à¦¬à¦¾à¦šà¦¨ করেছেন তা ইতিমধà§à¦¯à§‡à¦‡ বিদà§à¦¯à¦®à¦¾à¦¨ রয়েছে।\n" "আপনি কি বিদà§à¦¯à¦®à¦¾à¦¨ ফাইলটি পà§à¦°à¦¤à¦¿à¦¸à§à¦¥à¦¾à¦ªà¦¨ করতে চান?\n" "(সতরà§à¦•à§€à¦•à¦°à¦£: আসল ছবির গà§à¦£à¦—ত মান হয়ত নষà§à¦Ÿ হয়ে যেতে পারে)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "ছবির à¦à¦‡ ফরমà§à¦¯à¦¾à¦Ÿà§‡ লিখা সমরà§à¦¥à¦¿à¦¤ নয়।" #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "আপনি কি নিশà§à¦šà¦¿à¦¤ আপনি বরà§à¦¤à¦®à¦¾à¦¨ ফাইলটি মà§à¦›à§‡ ফেলতে চান?\n" "\n" "সতরà§à¦•à§€à¦•à¦°à¦£: à¦à¦•à¦¬à¦¾à¦° মà§à¦›à§‡ ফেললে, ফাইলটি পà§à¦¨à¦°à§à¦¦à§à¦§à¦¾à¦° করা সমà§à¦­à¦¬ হবে না।" #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "সà§à¦²à¦¾à¦‡à¦¡ পà§à¦°à¦¦à¦°à§à¦¶à¦¨ আরমà§à¦­/বনà§à¦§" #: ../src/main-win.c:1456 msgid "Save As" msgstr "নতà§à¦¨à¦­à¦¾à¦¬à§‡ সংরকà§à¦·à¦£" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr "* EOG ছবি পà§à¦°à¦¦à¦°à§à¦¶à¦• à¦à¦¬à¦‚ GThumb-র সোরà§à¦¸ কোড উলà§à¦²à§‡à¦– করে" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "সাদিয়া আফরোজ " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 #, fuzzy msgid "Copyright (C) 2007 - 2011" msgstr "সà§à¦¬à¦¤à§à¦¬à¦¾à¦§à¦¿à¦•à¦¾à¦° (C) ২০০৭ - ২০০৯" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "LXDE পà§à¦°à¦•à¦²à§à¦ª থেকে Lightweight ছবি পà§à¦°à¦¦à¦°à§à¦¶à¦•" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "আপনার সিসà§à¦Ÿà§‡à¦®à§‡à¦° সকল সমরà§à¦¥à¦¿à¦¤ ছবির ফাইলের জনà§à¦¯ GPicView পূরà§à¦¬à¦¨à¦¿à¦°à§à¦§à¦¾à¦°à¦¿à¦¤ পà§à¦°à¦¦à¦°à§à¦¶à¦• হিসেবে " "নিরà§à¦§à¦¾à¦°à¦¿à¦¤ হবে।\n" "(à¦à¦Ÿà¦¿ 'xdg-mime' পà§à¦°à§‹à¦—à§à¦°à¦¾à¦®à§‡à¦° মধà§à¦¯à¦®à§‡ সমà§à¦ªà¦¨à§à¦¨ হবে)\n" "\n" "আপনি কি নিশà§à¦šà¦¿à¦¤ আপনি সতà§à¦¯à¦¿à¦‡ à¦à¦Ÿà¦¾ করতে চান?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "সব সমরà§à¦¥à¦¿à¦¤ ছবি" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "সব ফাইল" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG গà§à¦£à¦—ত মান:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "কম গà§à¦£à¦—ত মানের ফলে অপেকà§à¦·à¦¾à¦•à§ƒà¦¤ ছোট আকারের ফাইল তৈরী হয়,\n" "কিনà§à¦¤à§ ছবির গà§à¦£à¦—ত মান খà§à¦¬à¦‡ খারাপ হয়।" #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG কমà§à¦ªà§à¦°à§‡à¦¶à¦¨ সà§à¦¤à¦°:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "উচà§à¦šà¦¤à¦° কমà§à¦ªà§à¦°à§‡à¦¶à¦¨à§‡à¦° ফলে অপেকà§à¦·à¦¾à¦•à§ƒà¦¤ ছোট আকারের ফাইল তৈরী হয়,\n" "কিনà§à¦¤à§ কমà§à¦ªà§à¦°à§‡à¦¶à¦¨ করতে অধিক সময়ের পà§à¦°à§Ÿà§‹à¦œà¦¨ হয়।" #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "সহজেই আপনার ছবিগà§à¦²à§‹ দেখà§à¦¨" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "ছবি সংরকà§à¦·à¦£ করার আগে জিজà§à¦žà§‡à¦¸ করা হবে" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "ছবি মà§à¦›à§‡ ফেলার আগে জিজà§à¦žà§‡à¦¸ করা হবে" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "সà§à¦¬à§Ÿà¦‚কà§à¦°à¦¿à§Ÿà¦­à¦¾à¦¬à§‡ আবরà§à¦¤à¦¿à¦¤ ছবি সংরকà§à¦·à¦£" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "EXIF সà§à¦¥à¦¿à¦¤à¦¿à¦¬à¦¿à¦¨à§à¦¯à¦¾à¦¸à§‡à¦° মান পরিবরà§à¦¤à¦¨ করে JPEG ফাইল আবরà§à¦¤à¦¨\n" "(শà§à¦§à§à¦®à¦¾à¦¤à§à¦° যদি EXIF সà§à¦¥à¦¿à¦¤à¦¿à¦¬à¦¿à¦¨à§à¦¯à¦¾à¦¸ টà§à¦¯à¦¾à¦— বিদà§à¦¯à¦®à¦¾à¦¨ থাকে)" #: ../data/pref-dlg.ui.h:7 #, fuzzy msgid "Slideshow interval" msgstr "সà§à¦²à¦¾à¦‡à¦¡ পà§à¦°à¦¦à¦°à§à¦¶à¦¨à§‡à¦° বিরতি\t" #: ../data/pref-dlg.ui.h:8 #, fuzzy msgid "sec" msgstr "সেকেনà§à¦¡\t" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "GPicView-কে পূরà§à¦¬à¦¨à¦¿à¦°à§à¦§à¦¾à¦°à¦¿à¦¤ ছবি পà§à¦°à¦¦à¦°à§à¦¶à¦• হিসেবে নিরà§à¦§à¦¾à¦°à¦£ করà§à¦¨" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "সাধারণ:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "পরà§à¦¦à¦¾ জà§à§œà§‡ পà§à¦°à¦¦à¦°à§à¦¶à¦¨:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "পটভূমির রং" gpicview-0.2.4/po/nn.po0000644000000000000000000001560412231705732011622 00000000000000# Translation of gpicview to Norwegian Nynorsk # Copyright © 2009 Karl Ove Hufthammer # This file is distributed under the same license as the gpicview package. # Karl Ove Hufthammer , 2009. # msgid "" msgstr "" "Project-Id-Version: gpicview\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2009-12-31 00:15+0100\n" "Last-Translator: Karl Ove Hufthammer \n" "Language-Team: Norwegian Nynorsk \n" "Language: nn\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Generator: Lokalize 1.0\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[FIL]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Vis versjonsinformasjon, og sÃ¥ avslutt." #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Start biletframvising" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Biletvisar" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Førre" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Neste" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Start biletframvising" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Forminsk" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Forstørr" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Tilpass til vindaugsstorleiken" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Opphavleg storleik" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Fullskjerm" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Drei mot klokka" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Drei med klokka" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Spegla vassrett" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Spegla loddrett" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Opna fil" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Lagra fil" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Lagra fil som" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Slett fil" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Innstillingar" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Avslutt" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Stopp framvising" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Det finst alt ei fil med dette namnet.\n" "Vil du skriva over denne fila?\n" "(Ã…tvaring: Kvaliteten pÃ¥ originalbiletet kan verta forringa.)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Det er ikkje støtte for lagring til dette formatet." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Er du sikker pÃ¥ at du vil sletta denne fila?\n" "\n" "Ã…tvaring: Du kan ikkje gjenoppretta sletta filer." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Start/stopp framvising" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Lagra som" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " – SjÃ¥ kjeldekoden til Eye of GNOME (EOG) og GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "Karl Ove Hufthammer" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright © 2007–2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Lett biletvisar for LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView vert standard biletvisingsprogram for alle biletfiler pÃ¥ dette " "systemet.\n" "(Dette vert gjort med programmet «xdg-mime».)\n" "\n" "Er du sikker pÃ¥ at du vil gjera dette?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Alle støtta biletfiler" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Alle filer" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG-kvalitet:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "LÃ¥gare verdiar gjev mindre filer,\n" "men dÃ¥rlegare biletkvalitet." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG-komprimering:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Høgare verdiar gjev mindre filer,\n" "men det tek lenger tid Ã¥ lagra dei." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Vis bilete" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Spør før lagring av bilete" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Spør før sletting av bilete" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Lagra automatisk dreia bilete" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Roter JPEG-biletet ved Ã¥ endra EXIF-retninga\n" "(berre viss det alt finst ein EXIF-retningsverdi)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Pause mellom kvart bilete" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "sekund" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Gjer GPicView til standardvisar for biletfiler" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Vanleg:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Fullskjerm:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Bakgrunnsfargar" gpicview-0.2.4/po/pt_BR.po0000644000000000000000000001771212231705732012217 00000000000000# Brazilian Portuguese Translations for GPicView package. # Copyright (C) 2009 the GPicView authors. # This file is distributed under the same license as the GPicView package. # Henrique P. Machado , 2009. # Thiago Avelino , 2009. # Sérgio Cipolla , 2010. # msgid "" msgstr "" "Project-Id-Version: gpicview 0.2.1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-10-13 20:08+0200\n" "Last-Translator: Henrique P. \n" "Language-Team: Brazilian Portuguese \n" "Language: pt_BR\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n > 1);\n" "X-Generator: Pootle 2.0.5\n" "X-Poedit-Language: Portuguese\n" "X-Poedit-Country: BRAZIL\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[ARQUIVO]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Mostra a versão e sai" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Iniciar apresentação de slides" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Visualizador de imagens" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Anterior" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Próximo" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Iniciar apresentação de slides" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Menos zoom" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Mais zoom" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Ajustar imagem à janela" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Tamanho original" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Tela cheia" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Girar no sentido anti-horário" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Girar no sentido horário" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Inverter horizontalmente" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Inverter verticalmente" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Abrir arquivo" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Salvar arquivo" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Salvar arquivo como" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Excluir arquivo" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Preferências" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Sair" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Parar apresentação de slides" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "O nome de arquivo que você escolheu já existe.\n" "Você deseja substituir o arquivo atual?\n" "Atenção: a qualidade da imagem original pode ser perdida." #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Não há suporte para gravar este formato de imagem" #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Você tem certeza que deseja excluir o arquivo atual?\n" "\n" "Atenção: uma vez excluído, o arquivo não pode ser recuperado." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Iniciar/Parar apresentação de slides" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Salvar como" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Exibir/Ocultar barra de ferramentas" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Consulte o código fonte do visualizador de imagens EOG e do GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Fábio Antunes \n" "Henrique P. Machado \n" "Sérgio Cipolla \n" "Adriano H. Hedler " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Visualizador de imagens leve e rápido do projeto LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "O GPicView se tornará o visualizador padrão para os arquivos de imagens " "suportados em seu sistema.\n" "(Isso será feito através do programa 'xdg-mime')\n" "\n" "Tem certeza que deseja fazer isso?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Todos os arquivos de imagem suportados" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Todos os arquivos" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "Qualidade de JPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Valores de qualidade baixos geram arquivos de tamanho pequeno,\n" "mas a qualidade do arquivo será baixa." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "Nível de compressão PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Valores de compressão altos geram arquivos de tamanho pequeno,\n" "mas isso demora mais tempo para fazer a compressão." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Visualize suas imagens de forma fácil" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Perguntar antes de salvar imagens" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Perguntar antes de excluir imagens" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Salvar automaticamente imagens rotacionadas" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Rotacionar o arquivo JPEG alterando o valor de orientação EXIF\n" "(somente se a etiqueta EXIF existir)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Intervalo entre os slides" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "segundo(s)" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Tornar o GPicview o visualizador padrão de imagens" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normal:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Tela cheia:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Cor de fundo" #~ msgid " Full Screen" #~ msgstr " Tela cheia" #~ msgid " * Some icons are taken from gimmage" #~ msgstr " * Alguns ícones retirados do gimmage" #~ msgid "" #~ "Lightweight image viewer\n" #~ "\n" #~ "Developed by Hon Jen Yee (PCMan)" #~ msgstr "" #~ "Visualizador leve de imagem\n" #~ "\n" #~ "Desenvolvido por Hon Jen Yee (PCMan)" gpicview-0.2.4/po/sl.po0000644000000000000000000001615212231705732011624 00000000000000# Slovenian translation of gpicview. # Copyright (C) 2011 - 2013 Free Software Foundation, Inc. # This file is distributed under the same license as the gpicview package. # Klemen KoÅ¡ir , 2011 - 2013. # msgid "" msgstr "" "Project-Id-Version: gpicview\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2013-07-29 14:38+0100\n" "Last-Translator: Klemen KoÅ¡ir \n" "Language-Team: Slovenian \n" "Language: sl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=4; plural=(n%100==1 ? 1 : n%100==2 ? 2 : n%100==3 || n" "%100==4 ? 3 : 0);\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[DATOTEKA]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "IzpiÅ¡e podatke o razliÄici." #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "ZaÄni predstavitev" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Pregledovalnik slik" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Predhodna" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Naslednja" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "ZaÄni predstavitev" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Oddalji" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Približaj" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Prilagodi sliko velikosti okna" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Izvirna velikost" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Celozaslonski naÄin" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Zavrti v nasprotni smeri urnega kazalca" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Zavrti v smeri urnega kazalca" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Zrcali vodoravno" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Zrcali navpiÄno" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Odpri datoteko" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Shrani datoteko" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Shrani datoteko kot" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "IzbriÅ¡i datoteko" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Možnosti" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "KonÄaj" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Zaustavi predstavitev" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Datoteka z izbranim imenom že obstaja.\n" "Ali želite prepisati obstojeÄo datoteko?\n" "(Opozorilo: kakovost izvirne slike se lahko izgubi)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Shranjevanje te vrste slik ni podprto." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Ali res želite izbrisati trenutno datoteko?\n" "\n" "Opozorilo: izbrisane datoteke ni mogoÄe obnoviti." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "ZaÄni/Zaustavi predstavitev" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Shrani kot" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Pokaži/skrij orodno vrstico" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Oglejte si izvorno kodo pregledovalnikov slik EOG in GThumb." #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Klemen KoÅ¡ir \n" "Andrej ŽnidarÅ¡iÄ " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Avtorske pravice © 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Pregledovalnik slik za LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView bo postal privzeti pregledovalnik vseh podprtih slikovnih datotek.\n" "(Dejanje bo izvedeno s programom »xdg-mime«)\n" "\n" "Ali ste prepriÄani, da želite to storiti?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Vse podprte slike" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Vse datoteke" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "Kakovost:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Nižja kot je vrednost, manjÅ¡a bo datoteka,\n" "vendar bo manjÅ¡a tudi kakovost slike." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "Raven stiskanja:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "ViÅ¡ja kot je raven stiskanja, manjÅ¡a bo datoteka,\n" "vendar bo stiskanje trajalo dlje." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Oglejte si svoje slike" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Zahtevaj potrditev pred shranitvijo slike" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Zahtevaj potrditev pred izbrisom slike" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Samodejno shrani zavrtene slike" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Zavrti datoteko JPEG s spremembo\n" "vrednosti usmerjenosti EXIF" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Hitrost predstavitve" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "(v sekundah)" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Nastavi GPicView kot privzeti pregledovalnik slik" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "ObiÄajno:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Celozaslonski naÄin:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Barva ozadja" gpicview-0.2.4/po/ps.po0000644000000000000000000001243212231705732011625 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "" #: ../src/main-win.c:304 msgid "Save File As" msgstr "" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "" #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "" #: ../src/main-win.c:1456 msgid "Save As" msgstr "" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr "" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "" gpicview-0.2.4/po/hr.po0000644000000000000000000001650212231705732011616 00000000000000# Croatian translation for GPicView. # Copyright (C) 2009 Hong Jen Yee (PCMan) # This file is distributed under the same license as the GPicView package. # Frank Bolkovich Boljsa , 2009. # msgid "" msgstr "" "Project-Id-Version: gpicview_hr\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-10-07 23:04+0200\n" "Last-Translator: zvacet \n" "Language-Team: Croatian \n" "Language: hr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%" "10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" "X-Generator: Pootle 2.0.5\n" "X-Poedit-Language: Croatian\n" "X-Poedit-Country: CROATIA\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[DATOTEKA]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "IspiÅ¡i informacije o verziji i izaÄ‘i" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Pokreni prikaz u slijedu" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Preglednik Slika" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Prethodno" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Sljedeće" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Pokreni prikaz u slijedu" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Smanji Zumiranje" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Povećaj Zumiranje" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Podesi sliku na veliÄinu prozora" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Orginalna VeliÄina" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Cijeli Zaslon" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Rotiraj Suprotno Smjeru Kazaljke na Satu" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Rotiraj u Smjeru Kazaljke na Satu" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Okreni vodoravno" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Okreni okomito" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Otvori Datoteku" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Spremi Datoteku" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Spremi Datoteku Kao" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "ObriÅ¡i Datoteku" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Postavke" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "IzaÄ‘i" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Zaustavi prikaz u slijedu" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Ime datoteke koje ste odabrali već postoji.\n" "Želite li prepisati preko postojeće datoteke?\n" "(Upozorenje: Kvaliteta orginalne slike može biti izgubljena)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Spremanje u ovaj slikovni format nije podržano." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Jeste li sigurni da želite obrisati trenutnu datoteku?\n" "\n" "Upozorenje: Jednom obrisana, datoteka se ne može vratiti." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Pokreni/zaustavi prikaz u slijedu" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Spremi kao" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Pokaži/sakrij alatnu traku" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Odnosi se na izvorni kod EOG preglednika datoteka i GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Ivica Kolić ikoli@yahoo.com\n" "Boljsa" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Lagani preglednik slika iz LXDE projekta" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView će postati standardni preglednik za sve podržane slikovne datoteke " "na vaÅ¡em sustavu.\n" "(Ovo će biti uÄinjeno kroz 'xdg-mime' program)\n" "\n" "Jeste li sigurno da želite ovo uÄiniti?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Sve Podržane Slike" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Sve Datoteke" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG kvaliteta:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Niže vrijednosti kvalitete donose manju veliÄinu datoteka,\n" "ali kvaliteta slike će biti manja." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG razina kompresije:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Veći kompresijski nivoi donose manje veliÄine datoteka,\n" "ali treba viÅ¡e vremena za kompresiju." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Pogledajte lako svoje slike" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Pitaj prije spremanja datoteka" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Pitaj prije brisanja datoteka" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Automatski spremi rotirane slike" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Rotiraj JPEG datoteku mijenjajući EXIF orijentacijsku vrijednost\n" "(samo ako postoji EXIF orijentacijska oznaka)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Interval prikaza u slijedu" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "sec" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Postavi GPicView standardnim preglednikom slika" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normalno:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Cijeli zaslon:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Pozadinske boje" gpicview-0.2.4/po/es_VE.po0000644000000000000000000001647612231705732012220 00000000000000# Spanish translation of GPicView # Copyright (C) 2008 THE GPicView'S COPYRIGHT HOLDER # This file is distributed under the same license as the GPicView package. # # Festor Wailon Dacoba, 2007 # Julio Napurí Carlos , 2008. # msgid "" msgstr "" "Project-Id-Version: gpicview\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2009-05-31 16:04+0200\n" "Last-Translator: Hugo Florentino \n" "Language-Team: Spanish \n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 1.1.0\n" "X-Poedit-Language: Spanish\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[ARCHIVO]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Mostrar información de la versión y salir" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Visor de imágenes" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Anterior" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Siguiente" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Alejar" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Acercar" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Redimensionar imagen al tamaño de la ventana" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Tamaño original" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Pantalla completa" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Rotar a la izquierda" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Rotar a la derecha" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Voltear horizontalmente" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Voltear verticalmente" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Abrir archivo" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Guardar archivo" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Guardar archivo como" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Eliminar archivo" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Preferencias" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Salir" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "El nombre del archivo que has seleccionado ya existe.\n" "¿Seguro que desea sobrescribir el archivo existente?\n" "(Atención: puede perderse la calidad de la imagen original)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "No se admite la escritura para este formato de imagen." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "¿Seguro que desea eliminar el archivo actual?\n" "\n" "Advertencia: Una vez eliminado, el archivo no podrá recuperarse." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Guardar como" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Consulte el código fuente del visor de imágenes EOG y del GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Festor Wailon Dacoba, 2007\n" "Julio Napurí Carlos , 2008\n" "Guillermo Iguarán , 2009\n" "Hugo Florentino , 2009" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Visor de imágenes ligero del proyecto LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView se convertirá en el visor predeterminado para todos los archivos de " "imagen en el sistema.\n" "(Esto se hará a través del programa 'xdg-mime')\n" "\n" "¿Estás seguro de desear hacer esto?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Todos los tipos de imágenes soportados" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Todos los archivos" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "Calidad JPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Los valores más bajos producen archivos de menor tamaño,\n" "pero la imagen tendrá una calidad más pobre." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "Nivel de compresión PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Los niveles más altos producen archivos de menor tamaño,\n" "pero la compresión toma más tiempo." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Preguntar antes de guardar imágenes" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Preguntar antes de eliminar las imágenes" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Guardar automáticamente las imágenes rotadas" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Rotar imagen JPEG cambiando el valor de orientación EXIF\n" "(solo si tal etiqueta existe)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Hacer de GPicview el visor de imágenes predeterminado" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normal:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Pantalla completa:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Colores de fondo" #~ msgid " Full Screen" #~ msgstr " Pantalla completa" gpicview-0.2.4/po/ja.po0000644000000000000000000001675712231705732011613 00000000000000# Japanese translation for GPicView # Copyright (C) 2008-2009 # This file is distributed under the same license as the GPicView package. # Hironao Komatsu , 2008-2009 # msgid "" msgstr "" "Project-Id-Version: gpicview 0.2.1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2009-08-27 13:44+0900\n" "Last-Translator: Hironao Komatsu \n" "Language-Team: Japanese \n" "Language: ja\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[ファイル]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "ãƒãƒ¼ã‚¸ãƒ§ãƒ³æƒ…報を表示ã—ã¦çµ‚了" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "スライドショーを開始" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "イメージビューワ" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "å‰ã¸" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "次ã¸" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "スライドショーを開始" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "縮å°" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "拡大" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "ウィンドウサイズã«åˆã‚ã›ã‚‹" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "å…ƒã®ã‚µã‚¤ã‚ºã«" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "フルスクリーン" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "å時計回りã«å›žè»¢ã™ã‚‹" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "時計回りã«å›žè»¢ã™ã‚‹" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "水平方å‘ã«è£è¿”ã™" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "åž‚ç›´æ–¹å‘ã«è£è¿”ã™" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "ファイルを開ã" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "ファイルをä¿å­˜ã™ã‚‹" #: ../src/main-win.c:304 msgid "Save File As" msgstr "åå‰ã‚’ã¤ã‘ã¦ä¿å­˜" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "ファイルを削除ã™ã‚‹" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "設定" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "終了" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "スライドショーを終了" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "ãã®åå‰ã®ãƒ•ã‚¡ã‚¤ãƒ«ã¯æ—¢ã«å­˜åœ¨ã—ã¾ã™ã€‚\n" "上書ãã—ã¾ã™ã‹ï¼Ÿ\n" "(警告: å…ƒã®ç”»è³ªãŒæãªã‚れるæã‚ŒãŒã‚ã‚Šã¾ã™)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "ã“ã®ç”»åƒãƒ•ã‚©ãƒ¼ãƒžãƒƒãƒˆã§ã®æ›¸ã出ã—ã¯ã‚µãƒãƒ¼ãƒˆã•ã‚Œã¦ã„ã¾ã›ã‚“。" #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "ã“ã®ãƒ•ã‚¡ã‚¤ãƒ«ã‚’本当ã«å‰Šé™¤ã—ã¾ã™ã‹ï¼Ÿ\n" "\n" "警告: 一度削除ã—ãŸãƒ•ã‚¡ã‚¤ãƒ«ã¯å¾©å…ƒã§ãã¾ã›ã‚“" #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "スライドショーã®é–‹å§‹/終了" #: ../src/main-win.c:1456 msgid "Save As" msgstr "åå‰ã‚’ã¤ã‘ã¦ä¿å­˜" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "ツールãƒãƒ¼ã‚’表示/éš ã™" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * EOG イメージビューワ㨠GThumb ã®ã‚½ãƒ¼ã‚¹ã‚³ãƒ¼ãƒ‰ã®å‚ç…§" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "Hironao Komatsu " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "LXDE プロジェクトã®è»½é‡ã‚¤ãƒ¡ãƒ¼ã‚¸ãƒ“ューワ" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView ã¯å¯¾å¿œã™ã‚‹ã™ã¹ã¦ã®ç”»åƒãƒ•ã‚¡ã‚¤ãƒ«ã«å¯¾ã—ã¦ã€ã‚ãªãŸã®ã‚·ã‚¹ãƒ†ãƒ ã§ã®æ¨™æº–ã®ã‚¤" "メージビューワã«ãªã‚Šã¾ã™ã€‚\n" "('xdg-mime' プログラムã«ã‚ˆã£ã¦)\n" "\n" "ãã†ãªã‚‹ã“ã¨ã‚’本当ã«å¸Œæœ›ã—ã¾ã™ã‹ï¼Ÿ" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "対応ã™ã‚‹ã™ã¹ã¦ã®ç”»åƒãƒ•ã‚¡ã‚¤ãƒ«" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "ã™ã¹ã¦ã®ãƒ•ã‚¡ã‚¤ãƒ«" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG 画質:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "å°ã•ã„値を与ãˆã‚‹ã»ã©ãƒ•ã‚¡ã‚¤ãƒ«ã‚µã‚¤ã‚ºã¯å°ã•ããªã‚Šã¾ã™ãŒã€\n" "画質ã¯æ‚ªåŒ–ã—ã¾ã™ã€‚" #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG 圧縮レベル:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "大ããªå€¤ã‚’与ãˆã‚‹ã»ã©ãƒ•ã‚¡ã‚¤ãƒ«ã‚µã‚¤ã‚ºã¯å°ã•ããªã‚Šã¾ã™ãŒã€\n" "圧縮ã«é•·ã„時間ãŒã‹ã‹ã‚‹ã‚ˆã†ã«ãªã‚Šã¾ã™ã€‚" #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "ç°¡å˜ã«ç”»åƒã‚’見るã“ã¨ãŒã§ãã¾ã™" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "ç”»åƒã‚’ä¿å­˜ã™ã‚‹éš›ã«ç¢ºèªã™ã‚‹" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "ç”»åƒã‚’削除ã™ã‚‹éš›ã«ç¢ºèªã™ã‚‹" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "回転ã•ã‚ŒãŸç”»åƒã‚’自動ã§ä¿å­˜ã™ã‚‹" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "JPEG ファイルã®å›žè»¢ã¯ EXIF タグを変更ã™ã‚‹ã“ã¨ã§è¡Œã†\n" "(EXIF ã«å›žè»¢æ–¹å‘ãŒä¿å­˜ã•ã‚Œã¦ã„ã‚‹å ´åˆã®ã¿)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "スライドショーã®é–“éš”" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "秒" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "GPicView を標準ã®ã‚¤ãƒ¡ãƒ¼ã‚¸ãƒ“ューワã«ã™ã‚‹" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "通常:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "フルスクリーン:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "背景色" gpicview-0.2.4/po/th.po0000644000000000000000000002070312231705732011616 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[ไฟล์]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "พิมพ์ข้อมูลรุ่นà¹à¸¥à¹‰à¸§à¸­à¸­à¸" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "เริ่มà¸à¸²à¸£à¸™à¸³à¹€à¸ªà¸™à¸­à¸ à¸²à¸žà¸™à¸´à¹ˆà¸‡" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "ตัวดูภาพ" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "ที่à¹à¸¥à¹‰à¸§" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "ต่อไป" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "เริ่มà¸à¸²à¸£à¸™à¸³à¹€à¸ªà¸™à¸­à¸ à¸²à¸žà¸™à¸´à¹ˆà¸‡" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "ขยาย" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "ย่อ" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "จัดภาพตามขนาดหน้าต่าง" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "ขนาดดั้งเดิม" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "เต็มจอ" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "หมุนทวนเข็มนาฬิà¸à¸²" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "หมุนตามเข็มนาฬิà¸à¸²" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "หมุนà¸à¸¥à¸±à¸šà¸«à¸±à¸§" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "หมุนà¸à¸¥à¸±à¸šà¸‚้าง" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "เปิดไฟล์" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "บันทึà¸à¹„ฟล์" #: ../src/main-win.c:304 msgid "Save File As" msgstr "บันทึà¸à¹„ฟล์เป็น" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "ลบไฟล์" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "à¸à¸²à¸£à¸›à¸±à¸šà¹à¸•à¹ˆà¸‡" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "ออà¸" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "หยุดà¸à¸²à¸£à¹€à¸ªà¸™à¸­à¸ à¸²à¸žà¸™à¸´à¹ˆà¸‡" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "มีชื่อไฟล์ที่เลือà¸à¹à¸¥à¹‰à¸§\n" "ต้องà¸à¸²à¸£à¸šà¸±à¸™à¸—ึà¸à¸—ับไฟล์ที่มีอยู่à¹à¸¥à¹‰à¸§à¸«à¸£à¸·à¸­à¹„ม่\n" "(คำเตือน: ภาพต้นฉบับจะถูà¸à¹à¸—นที่)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "ไม่สนับสนุนรูปà¹à¸šà¸šà¸à¸²à¸£à¹€à¸‚ียนไฟล์ภาพนี้" #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "ต้องà¸à¸²à¸£à¸¥à¸šà¹„ฟล์นี้หรือไม่?\n" "\n" "คำเตือน: เมื่อลบà¹à¸¥à¹‰à¸§à¹„ม่สามารถนำà¸à¸¥à¸±à¸šà¸„ืนได้" #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "เริ่ม/หยุดà¸à¸²à¸£à¹€à¸ªà¸™à¸­à¸ à¸²à¸žà¸™à¸´à¹ˆà¸‡" #: ../src/main-win.c:1456 msgid "Save As" msgstr "บันทึà¸à¹€à¸›à¹‡à¸™" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr "* อ้างอิง source code ของโปรà¹à¸à¸£à¸¡à¸”ูภาพ EOG à¹à¸¥à¸° GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "ผู้à¹à¸›à¸¥" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "สงวนลิขสิทธิ์ (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "ตัวดูรูบภาพà¹à¸šà¸šà¹€à¸šà¸²à¹† จาà¸à¹‚ครงà¸à¸²à¸£ LXDE " #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView จะถูà¸à¸•à¸±à¹‰à¸‡à¹ƒà¸«à¹‰à¹€à¸›à¹‡à¸™à¸•à¸±à¸§à¸”ูภาพà¸à¸±à¸šà¸£à¸¹à¸›à¹à¸šà¸šà¸ à¸²à¸žà¸—ั้งหมดของเครื่องคุณ\n" "(โดยใช้โปรà¹à¸à¸£à¸¡ 'xdg-mime' )\n" "\n" "คุณต้องà¸à¸²à¸£à¸—ำà¹à¸šà¸šà¸™à¸µà¹‰à¸«à¸£à¸·à¸­à¹„ม่?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "รูปà¹à¸šà¸šà¸ à¸²à¸žà¸—ั้งหมดที่สนับสนุน" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "ไฟล์ทั้งหมด" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "คุณภาพของ JPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "ค่าคุณภาพน้อยทำให้ภาพเล็à¸à¸¥à¸‡,\n" "à¹à¸•à¹ˆà¸ˆà¸°à¸—ำให้ภาพไม่ชัดเจน" #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "ระดับà¸à¸²à¸£à¸šà¸µà¸šà¸­à¸±à¸”ของ PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "à¸à¸²à¸£à¸šà¸µà¸šà¸­à¸±à¸”มาà¸à¸—ำให้ภาพเล็à¸à¸¥à¸‡,\n" "à¹à¸•à¹ˆà¸ˆà¸°à¹ƒà¸Šà¹‰à¹€à¸§à¸¥à¸²à¹ƒà¸™à¸à¸²à¸£à¸šà¸µà¸šà¸­à¸±à¸”มาà¸" #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "ดูภาพอย่างง่ายดาย" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "ถามà¸à¹ˆà¸­à¸™à¸šà¸±à¸™à¸—ึà¸à¸ à¸²à¸ž" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "ถามà¸à¹ˆà¸­à¸™à¸¥à¸šà¸ à¸²à¸ž" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "บันทึà¸à¸ à¸²à¸žà¸—ี่หมุนอัตโนมัติ" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "หมุนภาพ JPEG โดยเปลี่ยนค่า EXIF \n" "(เฉพาะเมื่อมีà¹à¸—็à¸à¹ƒà¸™à¸„่า EXIF อยู่à¹à¸¥à¹‰à¸§)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "เวลาหน่องà¸à¸²à¸£à¸™à¸³à¹€à¸ªà¸™à¸­à¸ à¸²à¸žà¸™à¸´à¹ˆà¸‡" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "วินาที่" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "ตั้งให้ GPicView เป็นตัวดูภาพหลัà¸" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "ทั่วไป:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "เต็มจอ:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "สีภาพพื้นหลัง" gpicview-0.2.4/po/zh_TW.po0000644000000000000000000001647712231705732012253 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-10-26 01:30+0200\n" "Last-Translator: Walter \n" "Language-Team: zh_TW \n" "Language: zh_TW\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Pootle 2.0.5\n" "X-Poedit-Language: Chinese\n" "X-Poedit-Country: TAIWAN\n" "X-Poedit-SourceCharset: utf-8\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[檔案]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "顯示版本資訊然後çµæŸ" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "開始放映" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "圖片檢視" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "上一張" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "下一張" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "開始放映" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "縮å°" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "放大" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "é©åˆè¦–窗大å°" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "原始大å°" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "全螢幕" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "逆時é‡æ—‹è½‰" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "順時é‡æ—‹è½‰" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "水平翻轉" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "垂直翻轉" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "開啟檔案" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "儲存檔案" #: ../src/main-win.c:304 msgid "Save File As" msgstr "å¦å­˜æ–°æª”" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "刪除檔案" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "å好設定" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "çµæŸ" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "åœæ­¢æ”¾æ˜ " #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "ä½ é¸æ“‡çš„檔案å稱已經存在\n" "是å¦ç¢ºå®šè¦è¦†è“‹åŽŸæœ‰æª”案？\n" "(警告：原影åƒçš„å“質å¯èƒ½æœƒå–ªå¤±)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "ç›®å‰ä¸æ”¯æ´å„²å­˜é€™ç¨®å½±åƒæ ¼å¼" #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "你是å¦ç¢ºå®šè¦åˆªé™¤ç›®å‰æª”案？\n" "\n" "警告：一旦刪除，檔案就無法復原。" #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "開始或åœæ­¢æ”¾æ˜ " #: ../src/main-win.c:1456 msgid "Save As" msgstr "å¦å­˜ç‚º" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "顯示ï¼éš±è—工具列" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * åƒè€ƒ EOG åŠ GThumb 的程å¼ç¢¼" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "洪任諭 (PCMan) \n" "Walter Cheuk " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView 圖片檢視" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "版權所有 (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "來自 LXDE 計畫的輕巧圖片檢視器" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView 會設定為所有å¯æ”¯æ´åœ–檔的é è¨­ç¨‹å¼ã€‚\n" "(這將會é€éŽ 'xdg-mime' 這個程å¼ä¾†é”æˆ)\n" "\n" "你是å¦ç¢ºå®šè¦é€™éº¼åšï¼Ÿ" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "所有支æ´çš„å½±åƒæ ¼å¼" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "所有檔案" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG å“質：" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "é¸æ“‡è¼ƒä½Žçš„å“質å¯ä»¥ç”¢ç”Ÿæ¯”較å°çš„檔案，\n" "但影åƒå“質會較差。" #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG 壓縮程度：" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "較高的壓縮程度å¯ç”¢ç”Ÿæ¯”較å°çš„檔案，\n" "但需è¦è¼ƒé•·çš„時間來進行壓縮。" #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "輕鬆檢視數ä½ç›¸ç‰‡å’Œåœ–片" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "儲存影åƒå‰å…ˆè©¢å•" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "刪除影åƒå‰å…ˆè©¢å•" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "自動儲存經éŽæ—‹è½‰çš„å½±åƒ" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "é€éŽæ”¹è®Š EXIF orientation 值來旋轉 JPEG 圖檔\n" "(åªæœ‰ç•¶ EXIF orientation 標籤存在時有效)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "放映間隔" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "秒" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "å°‡ GPicView 設為é è¨­çš„圖片檢視程å¼" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "正常：" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "全螢幕：" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "背景色彩" #~ msgid " Full Screen" #~ msgstr "全螢幕ç€è¦½" #~ msgid " * Some icons are taken from gimmage" #~ msgstr " * 部份圖示是從 gimmage å–å¾—" #~ msgid "" #~ "Lightweight image viewer\n" #~ "\n" #~ "Developed by Hon Jen Yee (PCMan)" #~ msgstr "" #~ "輕巧的圖片檢視器\n" #~ "\n" #~ "由洪任諭 (PCMan) 開發" #~ msgid " Original Size" #~ msgstr "原始尺寸" gpicview-0.2.4/po/nl.po0000644000000000000000000001651412231705732011621 00000000000000# Dutch translation of the gpicview package. # Copyright (C) the author of the gpicview package. # This file is distributed under the same license as the gpicview package. # Stephan Arts , 2008. # Pjotr, 2011. # msgid "" msgstr "" "Project-Id-Version: gpicview\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-09-25 23:12+0200\n" "Last-Translator: Pjotr \n" "Language-Team: Dutch\n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.0.5\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[BESTAND]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Versie-informatie afdrukken en afsluiten" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Begin diavoorstelling" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Afbeeldingkijker" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Vorige" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Volgende" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Begin diavoorstelling" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Uitzoomen" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Inzoomen" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Afbeelding aanpassen aan venstergrootte" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Oorspronkelijke grootte" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Volledig scherm" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Tegen de klok in draaien" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Met de klok mee draaien" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Horizontaal omdraaien" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Verticaal omdraaien" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Bestand openen" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Bestand opslaan" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Bestand opslaan als" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Bestand verwijderen" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Voorkeuren" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Afsluiten" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Staak diavoorstelling" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Een bestand met deze naam bestaat al.\n" "Wilt u het bestaande bestand overschrijven?\n" "(Waarschuwing: de kwaliteit van de oorspronkelijke afbeelding kan verloren " "gegaan zijn)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "" "Het wegschrijven naar dit afbeelding-opmaaktype wordt niet ondersteund." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Weet u zeker dat u het huidige bestand wilt verwijderen?\n" "\n" "Waarschuwing: nadat het is verwijderd, kan het bestand niet meer worden " "teruggeplaatst." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Begin/staak diavoorstelling" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Opslaan als" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Werkbalk tonen/verbergen" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Verwijs naar broncode van EOG-afbeeldingkijker en GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Stephan Arts\n" "Sander De Voogdt\n" "Pjotr" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Auteursrecht (C) 2007-2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Lichtgewicht afbeeldingkijker van het LXDE-project" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicview zal de standaardkijker worden voor alle ondersteunde " "afbeeldingbestanden op uw computer.\n" "(Dit gebeurt door middel van het 'xdg-mime' programma)\n" "\n" "Weet u zeker dat u wilt doen?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Alle ondersteunde afbeeldingen" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Alle bestanden" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG-kwaliteit:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Een lagere waarde voor kwaliteit zorgt voor kleinere bestanden,\n" "maar de beeldkwaliteit zal verminderen." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG-Compressieniveau:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Hogere compressiewaarden zorgen voor kleinere bestanden,\n" "maar de beeldkwaliteit zal verminderen." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Bekijk uw afbeeldingen op een makkelijke manier" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Vraag bevestiging voor opslaan van afbeeldingen" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Vraag bevestiging voor verwijderen van afbeeldingen" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Gedraaide afbeeldingen automatisch opslaan" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Draai JPEG-bestand door de EXIF-oriëntatiewaarde te veranderen\n" "(alleen indien EXIF-oriëntatie-etiket bestaat)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Diavoorstelling interval" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "sec" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Maak GPicView de standaardkijker voor afbeeldingen" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normaal:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Schermvullend:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Achtergrondkleuren" gpicview-0.2.4/po/fi.po0000644000000000000000000001573312231705732011610 00000000000000# Finnish translation for GPicView # Copyright (C) 2008 # This file is distributed under the same license as the GPicView package. # Elias Julkunen , 2008. # msgid "" msgstr "" "Project-Id-Version: 0.1.9\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2013-08-30 15:15+0000\n" "Last-Translator: Juhani \n" "Language-Team: \n" "Language: fi\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.5.0\n" "X-POOTLE-MTIME: 1377875704.0\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[TIEDOSTO]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Näytä versiotiedot ja poistu" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Käynnistä diaesitys" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Kuvankatselin" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Edellinen" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Seuraava" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Aloita diaesitys" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Loitonna" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Lähennä" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Sovita kuva ikkunan kokoon" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Todellinen koko" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Kokoruutu" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Käännä vastapäivään" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Käännä myötäpäivään" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Peilaa vaakasuunnassa" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Peilaa pystysuunnassa" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Avaa" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Tallenna" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Tallenna nimellä" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Poista" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Asetukset" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Lopeta" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Pysäytä diaesitys" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Valitsemasi tiedostonimi on jo käytössä.\n" "Haluatko korvata tämän tiedoston?\n" "(Varoitus: alkuperäisen kuvan tarkkuus voi kadota)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Tähän kuvamuotoon tallentamiselle ei ole tukea." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Haluatko varmasti poistaa nykyisen tiedoston?\n" "\n" "Varoitus: jos tiedosto poistetaan, sitä ei voi palauttaa." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Käynnistä/pysäytä diaesitys" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Tallenna nimellä" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Näytä/Piilota työkalurivi" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Viittaa EOG-kuvankatselimen ja GThumbin lähdekoodeihin" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "Elias Julkunen " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Tekijänoikeudet (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Kevyt kuvankatselin LXDE-projektista" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicViewistä tulee järjestelmän oletuskatselin kaikille tuetuille " "kuvatiedostoille.\n" "Tämä tehdään â€xdg-mimeâ€-ohjelman avulla.\n" "\n" "Tehdäänkö näin?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Kaikki tuetut kuvat" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Kaikki tiedostot" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG-laatu:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Pienemmät arvot tarkoittavat pienempiä tiedostoja,\n" "mutta kuvan laatu myös huononee." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG-pakkaustaso:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Mitä suurempi pakkaustaso, sitä pienempi koko,\n" "mutta pakkaukseen kuluu myös enemmän aikaa." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Katso kuviasi helposti" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Kysy ennen kuvien tallentamista" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Kysy ennen kuvien poistamista" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Tallenna automaattisesti käännetyt kuvat" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Käännä JPEG-tiedosto vaihtaen EXIF-asentoarvoa\n" "(vain jos EXIF-asentotunniste on jo olemassa)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Diaesityksen nopeus" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "sek" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Tee GPicviewistä oletuskuvankatselin" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normaali:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Kokoruutu:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Taustavärit" gpicview-0.2.4/po/pt.po0000644000000000000000000001642312231705732011632 00000000000000# Portuguese translation of GPICIEW package. # Copyright (C) 2010 THE GPICVIEW'S COPYRIGHT HOLDER # This file is distributed under the same license as the GPICVIEW package. # Sérgio Marques , 2009-2012. # Adaptado ao acordo ortográfico de 1990 msgid "" msgstr "" "Project-Id-Version: gpicview\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2013-07-25 11:25+0000\n" "Last-Translator: Sérgio \n" "Language-Team: Portuguese\n" "Language: pt\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.5.0\n" "X-POOTLE-MTIME: 1374751517.0\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[Ficheiro]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Mostra as informações da versão e sai" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Iniciar apresentação" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Visualizador de imagens" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Anterior" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Seguinte" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Iniciar apresentação" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Reduzir" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Aumentar" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Ajustar imagem à janela" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Tamanho original" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Ecrã completo" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Rodar à esquerda" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Rodar à direita" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Inversão horizontal" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Inversão vertical" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Abrir ficheiro" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Gravar ficheiro" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Gravar ficheiro como" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Eliminar ficheiro" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Preferências" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Sair" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Parar apresentação" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Já existe um ficheiro com este nome.\n" "Pretende substituir o ficheiro existente?\n" "(Atenção: pode perder a qualidade da imagem original)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Não há suporte para gravar este formato." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Tem a certeza que quer eliminar o ficheiro atual?\n" "\n" "Atenção: uma vez eliminado, não poderá ser recuperado." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Iniciar/parar apresentação" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Gravar como" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Mostrar/ocultar barra de ferramentas" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Consulte o código fonte dos visualizadores EOG e GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Ãlvaro Morais \n" "Sérgio Marques " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Direitos de autor (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Visualizador de imagens leve e rápido para o LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "O GPicView será o visualizador pré-definido para todas as imagens suportadas " "pelo seu sistema.\n" "(Isto será feito através do programa \"xdg-mime\")\n" "\n" "Tem a certeza de que é isto que quer?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Todas as imagens suportadas" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Todos os ficheiros" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "Qualidade JPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Se utilizar valores baixos gera ficheiros menores,\n" "mas a qualidade da imagem também será inferior." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "Nível de compressão PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Se utilizar níveis de compressão altos gera ficheiros menores,\n" "mas levam mais tempo a comprimir." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Ver imagens facilmente" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Perguntar antes de gravar imagens" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Perguntar antes de eliminar imagens" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Gravar automaticamente imagens rodadas" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Rodar ficheiro JPEG mudando o valor de orientação EXIF\n" "(só funciona se existirem detalhes de orientação EXIF)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Tempo entre imagens" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "seg." #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Tornar GPicview o visualizador de imagens do sistema" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normal:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Ecrã completo:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Cores de fundo" gpicview-0.2.4/po/de.po0000644000000000000000000001643612231705732011603 00000000000000# gpicview German translation # Martin Siggel , 2007. # Mario Blättermann , 2008, 2009. # msgid "" msgstr "" "Project-Id-Version: gpicview 0.1.3\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-09-28 20:47+0200\n" "Last-Translator: Daniel \n" "Language-Team: German \n" "Language: de\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.0.5\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[DATEI]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Versionsinformation anzeigen und beenden" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Diaschau starten" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Bildbetrachter" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Vorheriges" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Nächstes" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Diaschau starten" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Herauszoomen" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Hineinzoomen" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Bild an Fenstergröße anpassen" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Originalgröße" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Vollbildmodus" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Entgegen dem Uhrzeigersinn drehen" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Im Uhrzeigersinn drehen" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Horizontal spiegeln" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Vertikal spiegeln" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Datei öffnen" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Datei speichern" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Datei speichern unter" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Datei löschen" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Einstellungen" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Beenden" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Diaschau beenden" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Die ausgewählte Datei existiert bereits.\n" "Möchten Sie die vorhandene Datei überschreiben?\n" "(Warnung: Die Qualität des Originalbildes kann verloren gehen)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Dieses Bildformat kann nicht gespeichert werden." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Sind Sie sicher, dass Sie die Datei löschen möchten?\n" "\n" "Warnung: Nach dem Löschen kann diese\n" "Datei nicht mehr wieder hergestellt werden." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Diaschau starten/beenden" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Speichern unter" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Werkzeugleiste anzeigen/verstecken" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Basierend auf Quellcode des EOG-Bildbetrachters und GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Martin Siggel\n" "Mario Blättermann \n" "Christoph Wickert \n" "Lutz Thuns Daniel Winzen " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Leichtgewichtiger Bildbetrachter des LXDE-Projekts" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView wird als Standard-Bildbetrachter für alle unterstützten Bildformate " "auf Ihrem System gesetzt.\n" "(Dies geschieht durch das Programm 'xdg-mime'.)\n" "\n" "Wollen Sie dies wirklich tun?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Alle unterstützten Bilder" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Alle Dateien" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG-Qualität:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Ein niedrigerer Wert führt zu kleineren Dateigrößen,\n" "aber die Bildqualität nimmt ab." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG-Kompressionsgrad:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Eine höhere Komprimierung führt zu kleineren Dateigrößen,\n" "aber die Komprimierung nimmt mehr Zeit in Anspruch." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Bilder einfach betrachten" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Vor dem Speichern von Bildern nachfragen" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Vor dem Löschen von Bildern nachfragen" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Automatisches Speichern nach Bilddrehung" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "JPEG-Dateien auf Basis der EXIF-Ausrichtung drehen\n" "(nur wenn EXIF-Information zur Ausrichtung vorhanden ist)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Bildwechselintervall" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "s" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "GPicView als Standard-Bildbetrachter setzen" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normal:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Vollbildmodus" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Hintergrundfarben" gpicview-0.2.4/po/LINGUAS0000644000000000000000000000024712231705732011671 00000000000000af ar bg bn bn_IN ca cs da de el es es_VE et eu fa fi fr frp gl he hr hu id it ja ko lt ml ms nb nl nn pl ps pt pt_BR ru sk sl sr sv th tr uk ur ur_PK vi zh_CN zh_TW gpicview-0.2.4/po/sk.po0000644000000000000000000001612612231705732011624 00000000000000# Slovak translation of gpicview # Copyright (C) 2006 lxde team # This file is distributed under the same license as the gpicview package. # Ivan Masár , 2007, 2009. # msgid "" msgstr "" "Project-Id-Version: gpicview 0.1.3\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2010-01-16 19:21+0100\n" "Last-Translator: Ivan Masár \n" "Language-Team: Slovak \n" "Language: sk\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[SÚBOR]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "VypísaÅ¥ informácie o verzii a skonÄiÅ¥" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "SpustiÅ¥ prezentáciu" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "PrehliadaÄ obrázkov" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "PredoÅ¡lý" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "ÄŽalší" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "SpustiÅ¥ prezentáciu" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "OddialiÅ¥" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "PriblížiÅ¥" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "PrispôsobiÅ¥ obrázok oknu" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Pôvodná veľkosÅ¥" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Celá obrazovka" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "OtoÄiÅ¥ proti smeru hodinových ruÄiÄiek" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "OtoÄiÅ¥ v smere hodinových ruÄiÄiek" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "PrevrátiÅ¥ vodorovne" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "PrevrátiÅ¥ zvisle" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "OtvoriÅ¥ súbor" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "UložiÅ¥ súbor" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Uložíť súbor ako" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "ZmazaÅ¥ súbor" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Nastavenia" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "UkonÄiÅ¥" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "ZastaviÅ¥ prezentáciu" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Názov súboru, ktorý ste zvolili už existuje.\n" "Chcete prepísaÅ¥ existujúci súbor?\n" "(Upozornenie: Kvalita originálu sa môže stratiÅ¥)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Zápis tohto formátu súboru nie je podporovaný." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Ste si istý, že chcete zmazaÅ¥ vybraný súbor?\n" "\n" "Upozornenie: KeÄ ho raz zmažete, nebudete ho môcÅ¥ obnoviÅ¥." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "SpustiÅ¥/zastaviÅ¥ prezentáciu" #: ../src/main-win.c:1456 msgid "Save As" msgstr "UložiÅ¥ ako" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Pozrite sa do zdrojového kódu prehliadaÄa obrázkov EOG a GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "Ivan Masár" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "OdľahÄený prehliadaÄ obrázkov z projeku LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView sa stane predvoleným prehliadaÄom vÅ¡etkých podporovaných typov " "obrázkov na vaÅ¡om systéme.\n" "(Spraví sa to programom „xdg-mime“)\n" "\n" "Ste si istý, že to chcete spraviÅ¥?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "VÅ¡etky podporované obrázky" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "VÅ¡etky súbory" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "Kvalita JPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Nižšia kvalita produkuje menÅ¡iu veľkosÅ¥ súboru,\n" "ale kvalita obrázka bude horÅ¡ia." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "Úroveň kompresie PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "VyÅ¡Å¡ie úrovne kompresie produkujú menÅ¡iu veľkosÅ¥ súboru,\n" "ale kompresia bude dlhÅ¡ie trvaÅ¥." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Jednoduché prehliadanie obrázkov" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "PýtaÅ¥ sa pred ukladaním obrázov" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "PýtaÅ¥ sa pred zmazaním obrázov" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Automaticky ukladaÅ¥ otoÄené obrázky" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "OtáÄaÅ¥ JPEG súbory zmenou hodnoty orientácie EXIF\n" "(iba ak už EXIF znaÄka orientácie existuje)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Interval prezetácie" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "sek" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "UrobiÅ¥ GPicview predvoleným prehliadaÄom vÅ¡etkých obrázkov" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normálna:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Celá obrazovka:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Farby pozadia" gpicview-0.2.4/po/gl.po0000644000000000000000000001624112231705732011607 00000000000000msgid "" msgstr "" "Project-Id-Version: LXDE\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-10-12 10:13+0200\n" "Last-Translator: mbouzada \n" "Language-Team: Proxecto Trasno \n" "Language: gl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.0.5\n" "X-Poedit-Language: Galician\n" "X-Poedit-Country: SPAIN\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[FICHEIRO]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Amosar información da versión e saír" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Iniciar presentación" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Visor de imaxes" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Anterior" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Seguinte" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Iniciar a presentación" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Diminuír" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Aumentar" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Axustar a imaxe ao tamaño da xanela" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Tamaño orixinal" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Pantalla completa" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Rotar a esquerda" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Rotar a dereita" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Voltear horizontalmente" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Voltear verticalmente" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Abrir ficheiro" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Gardar ficheiro" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Gardar ficheiro como" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Eliminar ficheiro" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Preferencias" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Saír" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Deter a presentación" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "O nome do ficheiro que elixiu xa existe.\n" "Quere sobrescribir o ficheiro existente?\n" "(Coidado: Pode perder a calidade da imaxe orixinal)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Non se admite a escritura para este formato de imaxe." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Está seguro de querer eliminar o ficheiro actual?\n" "\n" "Coidado: Unha vez eliminado, o ficheiro non se pode recuperar." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Iniciar/Deter a presentación" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Gardar como" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Amosar/agochar a barra de ferramentas" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Consulte o código fonte do visor de imaxes EOG e do GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Festor Wailon Dacoba \n" "Indalecio Freiría Santos \n" "Miguel Anxo Bouzada \n" "Proxecto Trasno " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Visor de imaxes lixeiro do proxecto LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView converterase no visor predeterminado para todos os ficheiros de " "imaxe no sistema.\n" "(Isto farase a través do aplicativo «xdg-mime»)\n" "\n" "Está seguro de querer facer isto?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Todas as imaxes compatíbeis" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Todos os ficheiros" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "Calidade JPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Os valores máis baixos producen ficheiros de menor tamaño,\n" "mais a imaxe terá unha calidade máis pobre." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "Nivel de compresión PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Os niveis máis altos producen ficheiros de menor tamaño,\n" "mais a compresión leva máis tempo." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Vexa as súas imaxes doadamente" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Preguntar antes de gardar as imaxes" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Preguntar antes de eliminar as imaxes" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Gardar automaticamente as imaxes rotadas" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Rotar a imaxe JPEG cambiando o valor de orientación EXIF\n" "(só se a etiqueta existe)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Intervalo de diapositivas" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "seg." #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Facer de GPicView o visor de imaxes predeterminado" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normal:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Pantalla completa" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Cores de fondo" gpicview-0.2.4/po/ar.po0000644000000000000000000002001212231705732011576 00000000000000# translation of ar.po to Arabic # Arabic translations for PACKAGE package. # Copyright (C) 2009 THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # # أحمد Ùرغل , 2009. # Khaled Hosny , 2009. # Tareq Al Jurf , 2010. # msgid "" msgstr "" "Project-Id-Version: GPicView\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-10-04 20:17+0200\n" "Last-Translator: mohsen \n" "Language-Team: Arabic \n" "Language: ar\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=6; plural=n==0 ? 0 : n==1 ? 1 : n==2 ? 2 : n%100>=3 " "&& n%100<=10 ? 3 : n%100>=11 && n%100<=99 ? 4 : 5;\n" "X-Generator: Pootle 2.0.5\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[ملÙ]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "اكتب معلومات الإصدار ثم اخرج" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "ابدأ عرض الشرائح" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "عارض الصور" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "السابقة" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "التالية" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "ابدأ عرض الشرائح" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "بعّد" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "قرّب" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "لائم الصورة مع حجم الناÙذة" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "الحجم الأصلي" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "ملء الشاشة" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "ل٠عكس عقارب الساعة" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "ل٠مع عقارب الساعة" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "اقلب Ø£Ùقيا" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "اقلب رأسيا" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "اÙتح ملÙا" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "احÙظ الملÙ" #: ../src/main-win.c:304 msgid "Save File As" msgstr "احÙظ المل٠كـ" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "احذ٠الملÙ" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "التÙضيلات" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "أنهÙ" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "أوق٠عرض الشرائح" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "اسم المل٠الذي اخترته موجود بالÙعل.\n" "هل تريد الكتابة Ùوق المل٠الموجود؟\n" "(تحذير: قد تÙقد جودة الصورة الأصلية)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "الحÙظ بهيئة الصور هذه غير مدعوم." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "هل أنت متأكد أنك تريد حذ٠المل٠الحالي؟\n" "\n" "تحذير: لا يمكن استعادة المل٠بعد حذÙÙ‡." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "ابدأ/أوق٠عرض الشرائح" #: ../src/main-win.c:1456 msgid "Save As" msgstr "احÙظ كـ" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "إخÙاء\\عرض شريط الأدوات" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr "* راجع الشÙرة المصدرية لعارض الصور عين جنوم ÙˆGThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "أحمد Ùرغل كريم أولاد الشلحة " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "عارض الصور ج" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "حقوق النشر محÙوظة (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "عارض صور Ø®Ùي٠من مشروع لكسدي" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "سيصبح GPicview عارض الصور الاÙتراضي لكل ملÙات الصور المدعومة ÙÙŠ النظام.\n" "(ستتم هذه العملية بواسطة برنامج 'xdg-mime')\n" "\n" "هل أنت متأكد أنك تريد القيام بهذا؟" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "كل ملÙات الصور المدعومة" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "كل الملÙات" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "جودة JPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "الجودة الأقل تولد صورا أصغر،\n" "إلا أن جودة الصورة تكون أسوأ." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "مستوى ضغط PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "الضغط الأعلى يولد صورا أصغر،\n" "إلا أن إكمال الضغط يستغرق ÙˆÙتا أطول." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "اعرض صورك بسهولة" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "اسأل قبل Ø­Ùظ الصور" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "اسأل قبل حذ٠الصور" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "احÙظ الصور آليا بعد Ù„Ùها" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "ل٠صور JPEG عن طريق تغيير قيمة الاتجاه ÙÙŠ EXIF\n" "(Ùقط إذا كان وسم الاتجاه موجودا ÙÙŠ EXIF)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "مدة عرض الشرائح" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "ثانية" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "اجعل GPicView عارض الصور الاÙتراضي" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "الوضع العادي:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "ملء الشاشة:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "ألوان الخلÙية" #~ msgid " Full Screen" #~ msgstr "ملء الشاشة" gpicview-0.2.4/po/et.po0000644000000000000000000001601512231705732011614 00000000000000# gpicview eesti keele tõlge # Estonian translation of gpicview # Copyright (C) 2008 LXDE # This file is distributed under the same license as the gpicview package. # Mattias Põldaru , 2009. # msgid "" msgstr "" "Project-Id-Version: gpicview\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-09-24 21:14+0200\n" "Last-Translator: Anari \n" "Language-Team: Gnome Estonian Translation Team \n" "Language: et\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.0.5\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[FAIL]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Trükib versiooniteabe ja väljub" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Slaidiesitluse alustamine" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Pildivaatur" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Eelmine" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Järgmine" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Slaidiesitluse alustamine" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Vähenda" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Suurenda" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Mahuta pilt aknasse" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Lähtesuurus" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Täisekraan" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Pööra vastupäeva" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Pööra päripäeva" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Rõhtne pööramine" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Püstine pööramine" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Ava fail" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Salvesta fail" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Salvesta fail kui" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Kustuta fail" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Eelistused" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Lõpeta" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Slaidiesitluse peatamine" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Sinu valitud nimega fail on juba olemas.\n" "Kas tahad olemasoleva faili üle kirjutada?\n" "(Hoiatus: Pildi kvaliteet võib väheneda)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Selle pildivormingu kirjutamine pole toetatud." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Kas oled kindel, et see fail kustutada?\n" "\n" "Hoiatus: kord kustutatud faili pole võimalik taastada." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Slaidiesitluse alustamine/peatamine" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Salvesta kui" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Tööriistariba näitamine/peitmine" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Viit EOG ja GThumb pildivaaturite lähtekoodile" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Mattias Põldaru\n" "Anari Jalakas" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Sulgkerge pildivaatur LXDE projektilt" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView saab toetatud pildifailide vaikimisi vaaturiks.\n" "(See tehakse 'xdb-mime' programmi abil)\n" "\n" "Kas oled kindel, et see sooritada?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Kõik toetatud pildid" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Kõik failid" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG kvaliteet:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Väiksema kvaliteedi korral saab väiksemad failid,\n" "kuid pildi kvaliteet väheneb." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG tihenduse tase:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Suurema tihendustaseme korral saab väiksemad\n" "failid, kuid tihendamiseks kulub rohkem aega." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Vaata pilte veel lihtsamalt" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Enne pildi salvestamist küsitakse" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Enne pildi kustutamist küsitakse" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Pööratud pildid salvestatakse automaatselt" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "JPEG failid pööratakse EXIF suunasilti muutes\n" "(kui EXIFi suunasilt eksisteerib)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Slaidiesitluse ajavahemik" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "sek" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "GPicview on vaikimisi pildivaatur" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Tavaline:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Täisekraan:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Taustavärvid" #~ msgid " Full Screen" #~ msgstr "Täisekraan" gpicview-0.2.4/po/ur.po0000644000000000000000000002014212231705732011626 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: gpicview\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2009-05-20 10:09+0500\n" "Last-Translator: Muhammad Ali Makki \n" "Language-Team: Urdu \n" "Language: ur\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Poedit-Language: Urdu\n" "X-Poedit-Country: PAKISTAN\n" "X-Poedit-SourceCharset: utf-8\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[Ùائل]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "ورژن Ú©ÛŒ معلومات طبع کر Ú©Û’ برخاست کریں" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "تصاویر منظرکار" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "سابقÛ" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "اگلا" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "دور کریں" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "نزدیک کریں" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "تصویر Ú©Ùˆ ونڈو Ú©Û’ حجم پر لائیں" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "اصل حجم" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "پوری سکرین" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Ú¯Ú¾Ú‘ÛŒ Ú©Û’ عکس گھمائیں" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Ú¯Ú¾Ú‘ÛŒ Ú©ÛŒ سمت گھمائیں" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "اÙÙ‚ÛŒ گھمائیں" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "عمودی گھمائیں" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Ùائل کھولیں" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Ùائل محÙوظ کریں" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Ùائل محÙوظ کریں بنام" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Ùائل حذ٠کریں" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "ترجیحات" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "برخاست" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Ùائل کا نام جو آپ Ù†Û’ منتخب کیا ÛÛ’ ÙˆÛ Ù¾ÛÙ„Û’ ÛÛŒ موجود ÛÛ’.\n" "کیا آپ Ø³Ø§Ø¨Ù‚Û Ùائل پر لکھنا چاÛتے Ûیں؟\n" "(انتباÛ: اصل تصویر Ú©ÛŒ کوالٹی خراب Ûوسکتی ÛÛ’)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "تصویر Ú©Û’ اس Ùارمیٹ Ú©Ùˆ Ù„Ú©Ú¾Ù†Û’ Ú©ÛŒ معاونت Ù†Ûیں ÛÛ’." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "کیا آپ واقعی Ø­Ø§Ù„ÛŒÛ Ùائل Ú©Ùˆ حذ٠کرنا چاÛتے Ûیں؟\n" "\n" "انتباÛ: حذ٠Ûونے Ú©Û’ بعد Ùائل Ø¯ÙˆØ¨Ø§Ø±Û Ø­Ø§ØµÙ„ Ù†Ûیں Ú©ÛŒ جاسکے Ú¯ÛŒ." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "" #: ../src/main-win.c:1456 msgid "Save As" msgstr "محÙوظ بنام" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * ای او جی EOG اور GThumb تصاویر منظر کاروں کا مصدر Ú©ÙˆÚˆ دیکھیے" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "محمد علی Ù…Ú©ÛŒ\n" "makki.ma@gmail.com\n" "اردو کوڈر لینکس Ùورم\n" "http://www.urducoder.com\n" "Ù…Ú©ÛŒ کا بلاگ\n" "http://makki.urducoder.com" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "جی پیک ویو" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "کاپی رائٹ (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Ûلکا پھلکا تصاویر منظر کار برائے ایل ایکس ÚˆÛŒ ای پراجیکٹ" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "جی پیک ویو آپ Ú©Û’ نظام میں معاونت رکھنے والی تمام تصاویر Ùائلوں کا Ø·Û’ Ø´Ø¯Û " "تصاویر منظرکار بننے جارÛا ÛÛ’.\n" "(ÛŒÛ 'xdg-mime' پروگرام Ú©Û’ ذریعے انجام دیا جائے گا)\n" "\n" "کیا آپ واقعی ایسا کرنا چاÛتے Ûیں؟" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "تمام معاون تصاویر" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "تمام Ùائلیں" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG کوالٹی:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Ú©Ù… کوالٹی قدروں سے Ú©Ù… حجم Ú©ÛŒ Ùائلیں حاصل Ûوتی Ûیں،\n" "مگر تصویر Ú©ÛŒ کوالٹی Ú©Ù… Ûوجاتی ÛÛ’." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG دباؤ درجÛ:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Ø²ÛŒØ§Ø¯Û Ø¯Ø¨Ø§Ø¤ سے Ú©Ù… حجم Ú©ÛŒ Ùائلیں حاصل Ûوتی Ûیں،\n" "مگر دبانے میں Ø²ÛŒØ§Ø¯Û ÙˆÙ‚Øª صر٠Ûوتا ÛÛ’." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "تصاویر محÙوظ کرنے سے Ù¾ÛÙ„Û’ پوچھیں" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "تصاویر Ú©Ùˆ حذ٠کرنے سے Ù¾ÛÙ„Û’ سے پوچھیں" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "گھمائی گئی تصاویر Ú©Ùˆ خودکار طور پر محÙوظ کریں" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "JPEG Ú©Ùˆ EXIF جÛتیابی قدر تبدیل کر Ú©Û’ کھمائیں\n" "(صر٠اگر EXIF جÛتیابی ٹیک موجود Ûوا)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "جی پیک ویو Ú©Ùˆ تصاویر Ú©Û’ لیے Ø·Û’ Ø´Ø¯Û ØªØµØ§ÙˆÛŒØ± منظرکار بنائیں" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "سادÛ:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "پوری سکرین:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "پس منظر رنگ" gpicview-0.2.4/po/uk.po0000644000000000000000000002112412231705732011620 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-09-23 22:27+0200\n" "Last-Translator: LStranger \n" "Language-Team: LANGUAGE \n" "Language: uk\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%" "10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" "X-Generator: Pootle 2.0.5\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[FILE]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Показати інформацію про верÑÑ–ÑŽ Ñ– вийти" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Почати Ñлайдшоу" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "ПереглÑдач зображень GPicview" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Попереднє" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "ÐаÑтупне" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Почати Ñлайдшоу" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Зменшити" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Збільшити" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "МаÑштабувати до розміру вікна" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Справжній розмір" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Ðа повний екран" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Повернути проти годинникової Ñтрілки" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Повернути за годинниковою Ñтрілкою" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Перевернути горизонтально" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Перевернути вертикально" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Відкрити файл" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Зберегти файл" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Зберегти файл Ñк" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Видалити файл" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "ВподобаннÑ" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Вимкнути" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Зупинити Ñлайдшоу" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Ðазва файлу, Ñку Ви вибрали, вже Ñ–Ñнує.\n" "Ви бажаєте перезапиÑати вже Ñ–Ñнуючий файл?\n" "(ПопередженнÑ: Можна втратити ÑкіÑÑ‚ÑŒ оригінального малюнка)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Ð—Ð°Ð¿Ð¸Ñ Ð·Ð¾Ð±Ñ€Ð°Ð¶ÐµÐ½Ð½Ñ Ð² цьому форматі не підтримуєтьÑÑ." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Ви впевнені, що бажаєте видалити цей файл?\n" "\n" "ПопередженнÑ: Видаливши цей файл Ви не зможете його відновити." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Почати/Зупинити Ñлайдшоу" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Зберегти Ñк" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Показати/Сховати панель інÑтрументів" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * ЗвернітьÑÑ Ð´Ð¾ джерельного коду переглÑдача малюнків EOG Ñ– GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "Yarema aka Knedlyk " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Ð’ÑÑ– права заÑтережені (С) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Легкий переглÑдач зображень від проекту LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView Ñтане переглÑдачем зображень по замовчуванню Ð´Ð»Ñ Ð²ÑÑ–Ñ… файлів, Ñкі " "підтримуютьÑÑ Ð’Ð°ÑˆÐ¾ÑŽ ÑиÑтемою.\n" "(Це буде зроблено програмою 'xdg-mime')\n" "\n" "Ви дійÑно бажаєте це зробити?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Ð’ÑÑ– зображеннÑ, що підтримуютьÑÑ" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Ð’ÑÑ– файли" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "ЯкіÑÑ‚ÑŒ JPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Менше Ð·Ð½Ð°Ñ‡ÐµÐ½Ð½Ñ ÑкоÑÑ‚Ñ– приводить до меншого розміру файлів,\n" "але ÑкіÑÑ‚ÑŒ Ð·Ð¾Ð±Ñ€Ð°Ð¶ÐµÐ½Ð½Ñ Ð¿Ñ€Ð¸ цьому зменшитьÑÑ." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "Ступінь компреÑÑ–Ñ— PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Вищий Ñтупінь компреÑÑ–Ñ— зменшує розмір файлів,\n" "але забирає Ñ‡Ð°Ñ Ð½Ð° Ñаму копреÑÑ–ÑŽ." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Легко переглÑдайте Ваші зображеннÑ" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Запитувати перед збереженнÑм зображень" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Запитувати перед видаленнÑм зображень" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Ðвтоматично зберегти повернуті зображеннÑ" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Повертати JPEG файл через зміну Ð·Ð½Ð°Ñ‡ÐµÐ½Ð½Ñ Ð¿Ð¾Ð²Ð¾Ñ€Ð¾Ñ‚Ñƒ в EXIF (тільки коли Ñ†Ñ " "Ð¾Ð¿Ñ†Ñ–Ñ Ñ–Ñнує в EXIF)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Інтервал Ñлайдшоу" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "Ñек" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Зробити GPicView переглÑдачем зображень по замовчуванню" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Ðормально:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Повний екран:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Кольори тла" gpicview-0.2.4/po/ml.po0000644000000000000000000001243212231705732011613 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "" #: ../src/main-win.c:304 msgid "Save File As" msgstr "" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "" #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "" #: ../src/main-win.c:1456 msgid "Save As" msgstr "" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr "" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "" gpicview-0.2.4/po/af.po0000644000000000000000000001603712231705732011576 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # F Wolff , 2009. msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2010-01-14 11:22+0200\n" "Last-Translator: F Wolff \n" "Language-Team: translate-discuss-af@lists.sourceforge.net\n" "Language: af\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.0.0\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[LÊER]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Druk weergawe-inligting en sluit af" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Begin skyfievertoning" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Beeldbekyker" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Vorige" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Volgende" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Begin skyfievertoning" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Zoem uit" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Zoem in" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Pas prent by venstergrootte" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Oorspronklike grootte" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Volskerm" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Draai antikloksgewys" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Draai kloksgewys" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Swaai horisontaal om" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Swaai vertikaal om" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Open lêer" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Stoor lêer" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Stoor lêer as" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Skrap Lêer" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Voorkeure" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Sluit af" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Stop skyfievertoning" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Die lêernaam wat u gekies het, bestaan reeds.\n" "Wil u definitief die bestaande lêer oorskryf?\n" "(Waarskuwing: die kwaliteit van die oorspronklike beeld mag dalk verlore " "gaan)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Die skryf van hierdie beeldformaat word nie ondersteun nie." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Wil u definitief die huidige lêer skrap?\n" "\n" "Waarskuwing: as die lêer eers geskrap is, kan dit nie herwin word nie." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Begin/stop skyfievertoning" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Stoor as" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Verwys na die bronkode van EOG-beeldbekyker en GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "Friedel Wolff" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Kopiereg (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Liggewig beeldbekyker van die LXDE-projek" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView gaan die verstekbekyker word vir alle ondersteunde beeldlêers op u " "stelsel.\n" "(Dit sal gedoen word deur dei 'xdg-mime'-program)\n" "\n" "Wil u definitief dit doen?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Alle ondersteunde beelde" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Alle lêers" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG-kwaliteit:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Laer kwaliteitwaardes resulteer in kleiner lêergroottes,\n" "maar beeldkwaliteit sal swakker wees." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG-saampersvlak:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Hoër saampersvlakke resulteer in kleiner lêergroottes,\n" "maar benodig meer tyd vir die saampersing." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Bekyk beelde met gemak" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Vra voordat beelde gestoor word" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Vra voordat beelde geskrap word" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Stoor gedraaide beelde outomaties" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Draai JPEG-lêer deur die EXIF-oriëntasiewaarde te verander\n" "(slegs as die EXIF-oriëntasie-etiket bestaan)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Interval vir skyvievertoning" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "sek" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Maak GPicView die verstekbekyker vir beelde" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normaal:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Volskerm:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Agtergrondkleure" gpicview-0.2.4/po/he.po0000644000000000000000000001733512231705732011606 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-10-12 08:39+0200\n" "Last-Translator: Yaron \n" "Language-Team: LANGUAGE \n" "Language: he\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.0.5\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[FILE]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Print version information and exit" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "התחלת המצגת" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "מציג התמונות" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "הקוד×" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "הב×" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "התחלת המצגת" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "התרחקות" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "התקרבות" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "הת×מת גודל התמונה לגודל החלון" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "גודל מקורי" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "מסך מל×" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "סיבוב נגד כיוון השעון" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "סיבוב ×¢× ×›×™×•×•×Ÿ השעון" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "היפוך ×ופקי" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "היפוך ×× ×›×™" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "פתיחת קובץ" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "שמירת קובץ" #: ../src/main-win.c:304 msgid "Save File As" msgstr "שמירת קובץ בש×" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "מחיקת קובץ" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "העדפות" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "יצי××”" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "עצירת המצגת" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "×©× ×”×§×•×‘×¥ שנבחר כבר קיי×.\n" "×”×× ×œ×©×›×ª×‘ ×ת הקובץ הקיי×?\n" "(×זהרה: ×יכות התמונה המקורית עלולה להפג×)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "כתיבה כסוג תמונה ×–×” ××™× ×” נתמכת." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "×”×× ×œ×ž×—×•×§ ×ת הקובץ הנוכחי?\n" "\n" "×זהרה: ל×חר מחיקת הקובץ ×ין כל ×פשרות לשחזרו." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "התחלת/עצירת המצגת" #: ../src/main-win.c:1456 msgid "Save As" msgstr "שמירה בש×" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "הצגה/הסתרה של סרגל הכלי×" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * הפניה לקוד המקור של מציג התמונות EOG ושל GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "ירון שהרבני \n" "לי×ל פרידמן " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "מציג התמונות GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "כל הזכויות שמורות (C) â€2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "מציג תמונות קליל ×ž×ž×™×–× LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView יהפוך למציג בררת המחדל עבור כל קובצי התמונה ×”× ×ª×ž×›×™× ×©×‘×ž×¢×¨×›×ª שלך.\n" "(פעולה זו תתבצע דרך התכנית ‎â€'xdg-mime‎â€')\n" "\n" "â€×”×× ×‘×מת לבצע ×–×ת?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "כל התמונות הנתמכות" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "כל הקבצי×" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "×יכות ×”Ö¾JPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "ערכי ×יכות × ×ž×•×›×™× ×™×•×ª×¨ ×ž× ×™×‘×™× ×§×‘×¦×™× ×§×˜× ×™× ×™×•×ª×¨,\n" "×ך ×יכות התמונה תהיה נמוכה יותר." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "רמת דחיסת ×”Ö¾PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "ערכי דחיסה ×’×‘×•×”×™× ×™×•×ª×¨ ×ž× ×™×‘×™× ×§×‘×¦×™× ×§×˜× ×™× ×™×•×ª×¨,\n" "×ך נדרש זמן רב יותר לדחוס ×ות×." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "צפייה בהודעות ×”×ישיות בקלות" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "הצגת ש×לה ×‘×˜×¨× ×©×ž×™×¨×ª תמונות" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "הצגת ש×לה ×‘×˜×¨× ×ž×—×™×§×ª תמונות" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "שמירה ×וטומטית של תמונות מסובבות" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "סיבוב קובץ JPEG על ידי שינוי ערך הכיווניות ב־EXIF\n" "(רק ×× ×§×™×™×ž×•×ª תגיות כיווניות ב־EXIF)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "ההפרש בין הצגת התמונות" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "שניות" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "הפיכת GPicView למציג בררת המחדל עבור תמונות" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "רגיל:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "מסך מל×:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "צבעי הרקע" gpicview-0.2.4/po/tr.po0000644000000000000000000001641512231705732011635 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-10-08 12:34+0200\n" "Last-Translator: Necdet \n" "Language-Team: LANGUAGE \n" "Language: tr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Pootle 2.0.5\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[DOSYA]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Sürüm bilgisini yazdır ve çık" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Sunu gösterimi baÅŸlat" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Resim Görüntüleyici" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Önceki" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Sonraki" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Sunu Gösterimi BaÅŸlat" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "UzaklaÅŸtır" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "YakınlaÅŸtır" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Resmi Pencereye Sığdır" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Özgün Boyut" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Tam Ekran" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Saatin Tersi Yönünde Döndür" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Saat Yönünde Döndür" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Yatay Döndür" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Dikey Döndür" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Dosya Aç" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Dosyayı Kaydet" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Dosyayı Farklı Kaydet" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Dosyayı Sil" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Tercihler" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Çık" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Sunu Gösterimini Durdur" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "SeçtiÄŸiniz dosya adı zaten var.\n" "Var olan dosyanın üstüne yazmak istiyor musunuz?\n" "(Uyarı: Özgün resmin niteliÄŸi kaybolabilir)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Bu resim biçiminin yazımı desteklenmiyor." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Mevcut dosyayı silmek istediÄŸinizden emin misiniz?Uyarı: Dosya bir kere " "silinirse, kurtarılamaz. " #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Sunu Gösterimini BaÅŸlat/Durdur" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Farklı Kaydet" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Araç çubuÄŸunu Göster/Gizle" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr "" " * EOG imge görüntüleyici ve GThumb uygulamalarının kaynak koduna baÅŸvurun" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Mehmet Gülmen (memetgulmen@gmail.com)Kılıç Kökenmartinamca (martinamca@gmail." "com" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Telif Hakkı (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "LXDE giriÅŸiminden, hafif resim görüntüleyici" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView, sisteiminizdeki bütün desteklenen resim dosyaları için öntanımlı " "görüntüleyici olacak.\n" "('xdg-mime' uygulaması aracılığıyla yapılacak)\n" "\n" "Bunu gerçekten yapmak istediÄŸinizden emin misiniz?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Bütün Desteklenen Resimler" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Tüm Dosyalar" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG NiteliÄŸi:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Düşük nitelikli deÄŸerler, küçük dosya boyutları saÄŸlarlar,\n" "ama resmin kalitesi de düşük olur." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG Sıkıştırma Düzeyi:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Yüksek sıkıştırma düzeyleri, küçük dosya boyutları saÄŸlarlar,\n" "ama sıkıştırma iÅŸlemi daha çok zaman alır." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Resimlerinizi kolaylıkla görün" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Resimleri kaydetmeden önce sor" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Resimleri silmeden önce sor" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Döndürülen resimleri kendiliÄŸinden kaydet" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "JPEG dosyasını EXIF yönlendirme deÄŸerini deÄŸiÅŸtirerek döndürün\n" "(yalnızca EXIF yönlendirme etiketi varsa)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Sunu gösterimi aralığı" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "sn" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "GPicView uygulamasını resimler için öntanımlı görüntüleyici yap" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normal:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Tam Ekran:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Arkaplan renkleri" gpicview-0.2.4/po/da.po0000644000000000000000000001601512231705732011570 00000000000000# Danish translation for gpicview. # Copyright (C) 2010 gpicview & nedenstÃ¥ende oversættere. # This file is distributed under the same license as the gpicview package. # Joe Hansen (joedalton2@yahoo.dk), 2010. # msgid "" msgstr "" "Project-Id-Version: gpicview Rev. 1203\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2009-07-09 19:56+0200\n" "Last-Translator: Vidar Jon Bauge \n" "Language-Team: da_dk \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[FIL]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Udskriv versionsinformation og afslut" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Start diasshow" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Billedfremviser" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Forrige" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Næste" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Start diasshow" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Zoom ud" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Zoom ind" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Tilpas billede til vinduets størrelse" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Oprindelig størrelse" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Fuldskærm" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Roter mod uret" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Roter med uret" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Vend vandret" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Vend lodret" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Ã…bn fil" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Gem fil" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Gem fil som" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Slet fil" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Indstillinger" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Afslut" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Stop diasshow" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Det valgte filnavn findes allerede.\n" "Vil du overskrive den eksisterende fil?\n" "(Advarsel: Kvaliteten pÃ¥ det oprindelige billede kan gÃ¥ tabt)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Skrivning til dette billedformat er ikke understøttet." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Bekræft sletning.\n" "\n" "Advarsel: Kan ikke fortrydes." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Start/stop diasshow" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Gem som" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr "* Referer til kildekoden til EOG-billedfremviseren og GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Joe Hansen, 2010\n" "Vidar Jon Bauge \n" "Charlie Tyrrestrup \n" "\n" "Dansk-gruppen \n" "Mere info: http://www.dansk-gruppen.dk" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Ophavsret 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Letvægtsbilledfremviser fra LXDE-projektet" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView vil blive standardfremviser for alle understøttede billedfiler pÃ¥ " "dit system.\n" "(Dette sker ved hjælp af programmet xdg-mime)\n" "\n" "Er du sikker pÃ¥, at du vil dette?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Alle understøttede filtyper" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Alle filer" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG-kvalitet:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Laver kvalitetsværdier giver mindre filstørrelse,\n" "men billedkvaliteten vil blive lavere." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG-kompressionsniveau:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Højere kompressionsniveau giver mindre filstørrelse,\n" "men det tager længere tid at komprimere." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Fremvis nemt dine billeder" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Spørg før billeder gemmes" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Spørg før billeder slettes" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Gem roterede billeder automatisk" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Roter JPEG-fil ved at ændre retningsværdien i EXIF\n" "(kun hvis mærket for retningværdien i EXIF eksisterer)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Interval for diasshow" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "sek" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Gør GPicview til standardfremviser for billeder" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normal:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Fuldskærm:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Baggrundsfarver" gpicview-0.2.4/po/Makefile.in.in0000644000000000000000000001604612231706053013317 00000000000000# Makefile for program source directory in GNU NLS utilities package. # Copyright (C) 1995, 1996, 1997 by Ulrich Drepper # Copyright (C) 2004-2008 Rodney Dawes # # This file may be copied and used freely without restrictions. It may # be used in projects which are not available under a GNU Public License, # but which still want to provide support for the GNU gettext functionality. # # - Modified by Owen Taylor to use GETTEXT_PACKAGE # instead of PACKAGE and to look for po2tbl in ./ not in intl/ # # - Modified by jacob berkman to install # Makefile.in.in and po2tbl.sed.in for use with glib-gettextize # # - Modified by Rodney Dawes for use with intltool # # We have the following line for use by intltoolize: # INTLTOOL_MAKEFILE GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ PACKAGE = @PACKAGE@ VERSION = @VERSION@ SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ top_builddir = @top_builddir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ datadir = @datadir@ datarootdir = @datarootdir@ libdir = @libdir@ DATADIRNAME = @DATADIRNAME@ itlocaledir = $(prefix)/$(DATADIRNAME)/locale subdir = po install_sh = @install_sh@ # Automake >= 1.8 provides @mkdir_p@. # Until it can be supposed, use the safe fallback: mkdir_p = $(install_sh) -d INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ GMSGFMT = @GMSGFMT@ MSGFMT = @MSGFMT@ XGETTEXT = @XGETTEXT@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ MSGMERGE = INTLTOOL_EXTRACT="$(INTLTOOL_EXTRACT)" XGETTEXT="$(XGETTEXT)" srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --dist GENPOT = INTLTOOL_EXTRACT="$(INTLTOOL_EXTRACT)" XGETTEXT="$(XGETTEXT)" srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --pot ALL_LINGUAS = @ALL_LINGUAS@ PO_LINGUAS=$(shell if test -r $(srcdir)/LINGUAS; then grep -v "^\#" $(srcdir)/LINGUAS; else echo "$(ALL_LINGUAS)"; fi) USER_LINGUAS=$(shell if test -n "$(LINGUAS)"; then LLINGUAS="$(LINGUAS)"; ALINGUAS="$(ALL_LINGUAS)"; for lang in $$LLINGUAS; do if test -n "`grep \^$$lang$$ $(srcdir)/LINGUAS 2>/dev/null`" -o -n "`echo $$ALINGUAS|tr ' ' '\n'|grep \^$$lang$$`"; then printf "$$lang "; fi; done; fi) USE_LINGUAS=$(shell if test -n "$(USER_LINGUAS)" -o -n "$(LINGUAS)"; then LLINGUAS="$(USER_LINGUAS)"; else if test -n "$(PO_LINGUAS)"; then LLINGUAS="$(PO_LINGUAS)"; else LLINGUAS="$(ALL_LINGUAS)"; fi; fi; for lang in $$LLINGUAS; do printf "$$lang "; done) POFILES=$(shell LINGUAS="$(PO_LINGUAS)"; for lang in $$LINGUAS; do printf "$$lang.po "; done) DISTFILES = Makefile.in.in POTFILES.in $(POFILES) EXTRA_DISTFILES = ChangeLog POTFILES.skip Makevars LINGUAS POTFILES = \ # This comment gets stripped out CATALOGS=$(shell LINGUAS="$(USE_LINGUAS)"; for lang in $$LINGUAS; do printf "$$lang.gmo "; done) .SUFFIXES: .SUFFIXES: .po .pox .gmo .mo .msg .cat AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ INTLTOOL_V_MSGFMT = $(INTLTOOL__v_MSGFMT_$(V)) INTLTOOL__v_MSGFMT_= $(INTLTOOL__v_MSGFMT_$(AM_DEFAULT_VERBOSITY)) INTLTOOL__v_MSGFMT_0 = @echo " MSGFMT" $@; .po.pox: $(MAKE) $(GETTEXT_PACKAGE).pot $(MSGMERGE) $< $(GETTEXT_PACKAGE).pot -o $*.pox .po.mo: $(INTLTOOL_V_MSGFMT)$(MSGFMT) -o $@ $< .po.gmo: $(INTLTOOL_V_MSGFMT)file=`echo $* | sed 's,.*/,,'`.gmo \ && rm -f $$file && $(GMSGFMT) -o $$file $< .po.cat: sed -f ../intl/po2msg.sed < $< > $*.msg \ && rm -f $@ && gencat $@ $*.msg all: all-@USE_NLS@ all-yes: $(CATALOGS) all-no: $(GETTEXT_PACKAGE).pot: $(POTFILES) $(GENPOT) install: install-data install-data: install-data-@USE_NLS@ install-data-no: all install-data-yes: all linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ dir=$(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES; \ $(mkdir_p) $$dir; \ if test -r $$lang.gmo; then \ $(INSTALL_DATA) $$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ echo "installing $$lang.gmo as $$dir/$(GETTEXT_PACKAGE).mo"; \ else \ $(INSTALL_DATA) $(srcdir)/$$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ echo "installing $(srcdir)/$$lang.gmo as" \ "$$dir/$(GETTEXT_PACKAGE).mo"; \ fi; \ if test -r $$lang.gmo.m; then \ $(INSTALL_DATA) $$lang.gmo.m $$dir/$(GETTEXT_PACKAGE).mo.m; \ echo "installing $$lang.gmo.m as $$dir/$(GETTEXT_PACKAGE).mo.m"; \ else \ if test -r $(srcdir)/$$lang.gmo.m ; then \ $(INSTALL_DATA) $(srcdir)/$$lang.gmo.m \ $$dir/$(GETTEXT_PACKAGE).mo.m; \ echo "installing $(srcdir)/$$lang.gmo.m as" \ "$$dir/$(GETTEXT_PACKAGE).mo.m"; \ else \ true; \ fi; \ fi; \ done # Empty stubs to satisfy archaic automake needs dvi info ctags tags CTAGS TAGS ID: # Define this as empty until I found a useful application. install-exec installcheck: uninstall: linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \ rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \ done check: all $(GETTEXT_PACKAGE).pot rm -f missing notexist srcdir=$(srcdir) $(INTLTOOL_UPDATE) -m if [ -r missing -o -r notexist ]; then \ exit 1; \ fi mostlyclean: rm -f *.pox $(GETTEXT_PACKAGE).pot *.old.po cat-id-tbl.tmp rm -f .intltool-merge-cache clean: mostlyclean distclean: clean rm -f Makefile Makefile.in POTFILES stamp-it rm -f *.mo *.msg *.cat *.cat.m *.gmo maintainer-clean: distclean @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." rm -f Makefile.in.in distdir = ../$(PACKAGE)-$(VERSION)/$(subdir) dist distdir: $(DISTFILES) dists="$(DISTFILES)"; \ extra_dists="$(EXTRA_DISTFILES)"; \ for file in $$extra_dists; do \ test -f $(srcdir)/$$file && dists="$$dists $(srcdir)/$$file"; \ done; \ for file in $$dists; do \ test -f $$file || file="$(srcdir)/$$file"; \ ln $$file $(distdir) 2> /dev/null \ || cp -p $$file $(distdir); \ done update-po: Makefile $(MAKE) $(GETTEXT_PACKAGE).pot tmpdir=`pwd`; \ linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ echo "$$lang:"; \ result="`$(MSGMERGE) -o $$tmpdir/$$lang.new.po $$lang`"; \ if $$result; then \ if cmp $(srcdir)/$$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ rm -f $$tmpdir/$$lang.new.po; \ else \ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ :; \ else \ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ rm -f $$tmpdir/$$lang.new.po; \ exit 1; \ fi; \ fi; \ else \ echo "msgmerge for $$lang.gmo failed!"; \ rm -f $$tmpdir/$$lang.new.po; \ fi; \ done Makefile POTFILES: stamp-it @if test ! -f $@; then \ rm -f stamp-it; \ $(MAKE) stamp-it; \ fi stamp-it: Makefile.in.in $(top_builddir)/config.status POTFILES.in cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/Makefile.in CONFIG_HEADERS= CONFIG_LINKS= \ $(SHELL) ./config.status # Tell versions [3.59,3.63) of GNU make not to export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: gpicview-0.2.4/po/ru.po0000644000000000000000000002132112231705732011626 00000000000000# translation of ru.po to Russian # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # azamat@belyjsoft.ru, 11.04.2008. # Alexander Kazancev kazancas@mandriva.ru, 2010 msgid "" msgstr "" "Project-Id-Version: ru\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-10-02 19:34+0200\n" "Last-Translator: Alexander \n" "Language-Team: RUSSIAN \n" "Language: ru\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%" "10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" "X-Generator: Pootle 2.0.5\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[ФÐЙЛ]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "ВывеÑти информацию о верÑии и выйти" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "ЗапуÑк Ñлайдшоу" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "ПроÑмотр изображений" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Предыдущий" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Следующий" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "ЗапуÑк Ñлайдшоу" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Уменьшить" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Увеличить" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "МаÑштабировать к размеру окна" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "МаÑштаб 1:1" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Ðа полный Ñкран" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Повернуть против чаÑовой Ñтрелки" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Повернуть по чаÑовой Ñтрелке" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Перевернуть по горизонтали" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Перевернуть по вертикали" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Открыть файл" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Сохранить файл" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Сохранить файл как" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Удалить файл" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "ÐаÑтройки" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Выход" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "ОÑтанов Ñлайдшоу" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Файл Ñ Ñ‚Ð°ÐºÐ¸Ð¼ именем уже ÑущеÑтвует.\n" "Ð’Ñ‹ хотите перепиÑать ÑущеÑтвующий файл?\n" "(Внимание: КачеÑтво оригинала может быть потерÑно)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "ЗапиÑÑŒ Ñтого формата изображений не поддерживаетÑÑ." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Ð’Ñ‹ уверены что хотите удалить Ñтот файл?\n" "\n" "Внимание: Удаленный файл не может быть воÑÑтановлен." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "ЗапуÑк/оÑтанов Ñлайдшоу" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Сохранить как" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Показать/Скрыть панель" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Смотри иÑходный код проÑмотрщика EOG и GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "перевод Kazm Ð´Ð»Ñ PuppyRus Linux http://puppyrus.ru\n" "Vitaly Pashkov " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Ð’Ñе права защищены (С) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Легкий проÑмотрщик изображений Ð´Ð»Ñ Ð¿Ñ€Ð¾ÐµÐºÑ‚Ð° LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView Ñтанет проÑмотрщиком изображений по умолчанию Ð´Ð»Ñ Ð²Ñех " "поддерживаемых файлов в вашей ÑиÑтеме.\n" "(Это будет Ñделано через программу 'xdg-mime')\n" "\n" "Ð’Ñ‹ дейÑтвительно хотите Ñделать Ñто?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Ð’Ñе поддерживаемые изображениÑ" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Ð’Ñе файлы" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "КачеÑтво JPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Меньший уровень качеÑтва приводит к меньшим размерам,\n" " но качеÑтво Ð¸Ð·Ð¾Ð±Ñ€Ð°Ð¶ÐµÐ½Ð¸Ñ Ð±ÑƒÐ´ÐµÑ‚ хуже." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "Уровень ÑÐ¶Ð°Ñ‚Ð¸Ñ PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Больший уровень ÑÐ¶Ð°Ñ‚Ð¸Ñ Ð¿Ñ€Ð¸Ð²Ð¾Ð´Ð¸Ñ‚ к меньшим размерам,\n" "но требует больше времени на Ñжатие." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Смотрите ваши Ð¸Ð·Ð¾Ð±Ñ€Ð°Ð¶ÐµÐ½Ð¸Ñ Ð±ÐµÐ· проблем" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "СпроÑить перед Ñохранением изображений" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "СпроÑить перед удалением изображений" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "ÐвтоматичеÑки ÑохранÑÑ‚ÑŒ повернутые изображениÑ" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Поворачивать JPEG файл изменÑÑ Ð·Ð½Ð°Ñ‡ÐµÐ½Ð¸Ðµ ориентации EXIF\n" "(только еÑли параметр ориентации EXIF ÑущеÑтвует)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Интервал Ñлайдшоу" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "Ñек" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Сделать GPicView проÑмотрщиком изображений по-умолчанию" # Ðужно проверить интерфейÑ, Ñ‚.к. в англ. прил/Ñущ/гл еÑÑ‚ÑŒ одно Ñлово. #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Обычный:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Ðа полный Ñкран:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Цвета фона" gpicview-0.2.4/po/ko.po0000644000000000000000000001647012231705732011622 00000000000000# Korean translation for the gpicview package. # Copyright (C) 2009-2012 Free software foundation Inc. # This file is distributed under the same license as the gpicview package. # Seong-ho Cho , 2012. # msgid "" msgstr "" "Project-Id-Version: gpicview.master\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: \n" "Last-Translator: Seong-ho Cho \n" "Language-Team: Seong-ho Cho \n" "Language: ko\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "<파ì¼>" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "버전 정보를 출력하고 ë냅니다" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "슬ë¼ì´ë“œ 쇼를 시작합니다" #: ../src/main-win.c:165 #: ../src/main-win.c:1413 #: ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "그림 보기" #: ../src/main-win.c:267 #: ../src/main-win.c:1438 msgid "Previous" msgstr "ì´ì „" #: ../src/main-win.c:268 #: ../src/main-win.c:1439 msgid "Next" msgstr "다ìŒ" #: ../src/main-win.c:269 #: ../src/main-win.c:754 msgid "Start Slideshow" msgstr "슬ë¼ì´ë“œ 쇼 시작" #: ../src/main-win.c:273 #: ../src/main-win.c:1442 msgid "Zoom Out" msgstr "축소" #: ../src/main-win.c:274 #: ../src/main-win.c:1443 msgid "Zoom In" msgstr "확대" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 #: ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "ê·¸ë¦¼ì„ ì°½ í¬ê¸°ì— 맞추기" #: ../src/main-win.c:283 #: ../src/main-win.c:1445 msgid "Original Size" msgstr "본래 í¬ê¸°" #: ../src/main-win.c:290 #: ../src/main-win.c:1447 msgid "Full Screen" msgstr "ì „ì²´ 화면" #: ../src/main-win.c:294 #: ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "반시계 ë°©í–¥ 회전" #: ../src/main-win.c:295 #: ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "시계 ë°©í–¥ 회전" #: ../src/main-win.c:297 #: ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "ìˆ˜í‰ ë’¤ì§‘ê¸°" #: ../src/main-win.c:298 #: ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "ìˆ˜ì§ ë’¤ì§‘ê¸°" #: ../src/main-win.c:302 #: ../src/main-win.c:1454 msgid "Open File" msgstr "íŒŒì¼ ì—´ê¸°" #: ../src/main-win.c:303 #: ../src/main-win.c:1455 msgid "Save File" msgstr "íŒŒì¼ ì €ìž¥í•˜ê¸°" #: ../src/main-win.c:304 msgid "Save File As" msgstr "다른 ì´ë¦„으로 저장" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 #: ../src/main-win.c:1458 msgid "Delete File" msgstr "íŒŒì¼ ê°€ì œí•˜ê¸°" #: ../src/main-win.c:308 #: ../src/main-win.c:1460 #: ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "기본 설정" #: ../src/main-win.c:309 #: ../src/main-win.c:1464 msgid "Quit" msgstr "나가기" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "슬ë¼ì´ë“œ 쇼 중지" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "ì„ íƒí•œ íŒŒì¼ ì´ë¦„ì´ ì´ë¯¸ 존재합니다.\n" "기존 파ì¼ì— ë®ì–´ 쓰시겠습니까?\n" "(경고: 본래 파ì¼ì˜ í™”ì§ˆì„ ìžƒì„ ê²ƒìž…ë‹ˆë‹¤)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "ì´ ê·¸ë¦¼ 형ì‹ì˜ 기ë¡ì„ 지ì›í•˜ì§€ 않습니다." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "ì´ íŒŒì¼ì„ ì •ë§ë¡œ 삭제하시겠습니까?\n" "\n" "경고: í•œ 번 삭제하면 복구할 수 없습니다." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "슬ë¼ì´ë“œ 쇼 시작/중지" #: ../src/main-win.c:1456 msgid "Save As" msgstr "다른 ì´ë¦„으로 저장" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "ë„구 ëª¨ìŒ ë³´ì´ê¸°/숨기기" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * EOG 그림보기와 GThumbì˜ ì†ŒìŠ¤ì½”ë“œë¥¼ 참조하십시오" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "Seong-ho Cho " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "LXDE 프로ì íŠ¸ì˜ 가벼운 그림 보기 프로그램" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView는 ì—¬ëŸ¬ë¶„ì˜ ì‹œìŠ¤í…œì—ì„œ 지ì›í•˜ëŠ” 모든 그림 파ì¼ì˜ 기본 보기 í”„ë¡œê·¸ëž¨ì´ ë  ê²ƒìž…ë‹ˆë‹¤.\n" "('xdg-mime' 프로그램으로 실행할 것입니다)\n" "\n" "ì •ë§ë¡œ 실행하시겠습니까?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "모든 지ì›í•˜ëŠ” 그림" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "모든 파ì¼" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG 화질:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "ë‚®ì€ í™”ì§ˆ ê°’ì€ íŒŒì¼ í¬ê¸°ë¥¼ 작게 í•  것입니다만,\n" "그림 í™”ì§ˆì€ ë–¨ì–´ì§ˆ 것입니다." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG 압축 수준:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "ë†’ì€ ì••ì¶• ìˆ˜ì¤€ì€ íŒŒì¼ í¬ê¸°ë¥¼ 작게 í•  것입니다만,\n" "ì••ì¶•í•˜ëŠ”ë° ì‹œê°„ì´ ì¢€ ë” ê±¸ë¦´ 것입니다." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "ê·¸ë¦¼ì„ ì‰½ê²Œ 봅니다" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "ê·¸ë¦¼ì„ ì €ìž¥í•˜ê¸° ì „ì— ë¬»ê¸°" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "ê·¸ë¦¼ì„ ì‚­ì œí•˜ê¸° ì „ì— ë¬»ê¸°" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "회전한 ê·¸ë¦¼ì„ ìžë™ìœ¼ë¡œ 저장하기" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "EXIF ë°©í–¥ ê°’ì„ ë°”ê¿” JPEG 파ì¼ì„ 회전합니다\n" "(EXIF ë°©í–¥ 태그가 존재할 경우ì—만)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "슬ë¼ì´ë“œ 쇼 시간 간격" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "ì´ˆ" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "GPicView를 ê·¸ë¦¼ì„ ë³´ê¸°ìœ„í•œ 기본 프로그램으로 설정합니다" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "ì¼ë°˜:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "ì „ì²´ 화면:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "ë°°ê²½ 색" gpicview-0.2.4/po/vi.po0000644000000000000000000001673612231705732011634 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: GPicView 0.2.1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-10-12 04:42+0200\n" "Last-Translator: Duy Hung \n" "Language-Team: \n" "Language: vi\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Pootle 2.0.5\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[TẬP TIN]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "In thông tin phiên bản và thoát" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Bắt đầu trình diá»…n ảnh" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Ứng dụng xem ảnh" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "TrÆ°á»›c" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Sau" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Bắt đầu Trình diá»…n ảnh" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Thu nhá»" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Phóng lá»›n" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Kích thÆ°á»›c Vừa Cá»­a sổ" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Kích thÆ°á»›c Gốc" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Toàn Màn hình" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Xoay Phải" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Xoay Trái" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Lật Theo Chiá»u ngang" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Lật Theo Chiá»u dá»c" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Mở Tập tin" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "LÆ°u Tập tin" #: ../src/main-win.c:304 msgid "Save File As" msgstr "LÆ°u Bản sao" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Xóa Tập tin" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Tùy chỉnh" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Thoát" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Dừng Trình diá»…n ảnh" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Tên tập tin bạn chá»n đã tồn tại.\n" "Bạn có muốn lÆ°u đè lên tập tin này không?\n" "(Cảnh báo: Chất lượng của ảnh gốc có thể bị giảm)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr " LÆ°u định dạng ảnh này không được há»— trợ." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Bạn có chắc chắn muốn xóa tập tin hiện tại?\n" "\n" "Cảnh báo: Má»™t khi đã bị xóa, tập tin không thể được phục hồi." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Bắt đầu/Dừng Trình chiếu ảnh" #: ../src/main-win.c:1456 msgid "Save As" msgstr "LÆ°u Bản sao" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Hiện/ẩn thanh công cụ" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr "* Dá»±a vào mã nguồn của chÆ°Æ¡ng trình xem ảnh EOG và GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "Tran Duy Hung " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Bản quyá»n (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "ChÆ°Æ¡ng trình xem ảnh gá»n nhẹ từ dá»± án LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView sẽ trở thành chÆ°Æ¡ng trình mặc địch để xem các tập tin ảnh được há»— " "trợ trên hệ thống của bạn.\n" "(Việc này sẽ được thá»±c hiện thông qua chÆ°Æ¡ng trình 'xdg-mime')\n" "\n" "Bạn có chắc chắn bạn muốn làm Ä‘iá»u này?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Tất cả Hình ảnh Äược há»— trợ" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Tất cả Tập tin" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "Chất lượng JPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Những giá trị chất lượng thấp hÆ¡n làm kích thÆ°á»›c tập tin nhá» hÆ¡n,\n" "nhÆ°ng chất lượng ảnh sẽ giảm theo." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "Cấp Ä‘á»™ Nén PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Cấp Ä‘á»™ nén cao hÆ¡n sẽ làm kích thÆ°á»›c tập tin nhá» hÆ¡n,\n" "nhÆ°ng sẽ tốn nhiá»u thá»i gian để nén." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Xem hình ảnh của bạn má»™t cách dá»… dàng" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Há»i trÆ°á»›c khi lÆ°u ảnh" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Há»i trÆ°á»›c khi xóa ảnh" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Tá»± Ä‘á»™ng lÆ°u ảnh đã được xoay" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Xoay tập tin JPEG bằng cách thay đổi giá trị định hÆ°á»›ng EXIF\n" "(chỉ khi thẻ định hÆ°á»›ng EXIF tồn tại)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Khoảng cách trình diá»…n" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "giây" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Sá»­ dụng GPicView là chÆ°Æ¡ng trình xem ảnh mặc định" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Bình thÆ°á»ng:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Toàn màn hình:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Màu ná»n" gpicview-0.2.4/po/es.po0000644000000000000000000001675012231705732011621 00000000000000# Spanish (Castilian) translation for GPicView. # Copyright (C) 2009 The LXDE Team. # This file is distributed under the same license as the GPicView package. # Festor Wailon Dacoba , 2007. # msgid "" msgstr "" "Project-Id-Version: gpicview 0.2.1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-10-09 01:20+0200\n" "Last-Translator: Hugo \n" "Language-Team: Spanish\n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.0.5\n" "X-Poedit-Language: Spanish\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[ARCHIVO]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Mostrar información de la versión y salir" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Iniciar presentación" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Visor de imágenes" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Anterior" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Siguiente" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Iniciar presentación" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Alejar" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Acercar" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Redimensionar imagen al tamaño de la ventana" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Tamaño original" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Pantalla completa" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Rotar a la izquierda" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Rotar a la derecha" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Voltear horizontalmente" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Voltear verticalmente" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Abrir archivo" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Guardar archivo" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Guardar archivo como" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Eliminar archivo" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Preferencias" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Salir" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Detener presentación" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "El nombre de archivo que ha elegido ya existe.\n" "¿Desea reemplazar el archivo existente?\n" "(Advertencia: Puede perderse la calidad de la imagen original)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "No se admite la escritura para este formato de imagen." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "¿Está seguro que desea eliminar este archivo?\n" "\n" "Advertencia: Una vez eliminado, el archivo no podrá recuperarse." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Iniciar/Detener presentación" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Guardar como" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Mostrar/Ocultar la barra de herramientas" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Consulte el código fuente del visor de imágenes EOG y del GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Festor Wailon Dacoba , 2007\n" "Julio Napurí Carlos , 2008\n" "Guillermo Iguarán , 2009\n" "Hugo Florentino , 2009-2010\n" "Lino Sotomayor , 2010" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Visor de imágenes ligero del proyecto LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView se convertirá en el visor predeterminado para todos los archivos de " "imagen en el sistema.\n" "(Esto se hará a través del programa 'xdg-mime')\n" "\n" "¿Está seguro que realmente desea hacer esto?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Todos los tipos de imágenes soportados" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Todos los archivos" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "Calidad JPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Los valores más bajos producen archivos de menor tamaño,\n" "pero la imagen tendrá una calidad más pobre." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "Nivel de compresión PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Los niveles más altos producen archivos de menor tamaño,\n" "pero la compresión toma más tiempo." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Vea sus imágenes fácilmente" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Preguntar antes de guardar imágenes" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Preguntar antes de eliminar las imágenes" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Guardar automáticamente las imágenes rotadas" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Rotar imagen JPEG cambiando el valor de orientación EXIF\n" "(solo si existe la etiqueta de orientación EXIF)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Intervalo de la presentación" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "seg" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Hacer de GPicView el visor de imágenes predeterminado" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normal:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Pantalla completa:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Colores de fondo" gpicview-0.2.4/po/zh_CN.po0000644000000000000000000001601112231705732012201 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # 程任全 , 2008. # ideal <05281253@bjtu.edu.cn>, 2008. # msgid "" msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-10-14 12:25+0200\n" "Last-Translator: Wylmer \n" "Language-Team: zh_CN \n" "Language: zh_CN\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Pootle 2.0.5\n" "X-Poedit-Language: Chinese\n" "X-Poedit-Country: China\n" "X-Poedit-SourceCharset: utf-8\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[文件]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "打å°ç‰ˆæœ¬ä¿¡æ¯ç„¶åŽé€€å‡º" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "开始幻ç¯ç‰‡æ”¾æ˜ " #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "图åƒæŸ¥çœ‹å™¨" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "上一张" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "下一张" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "开始幻ç¯ç‰‡æ”¾æ˜ " #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "缩å°" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "放大" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "图åƒé€‚åˆçª—å£å¤§å°" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "原始大å°" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "å…¨å±å¹•" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "逆时针旋转" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "顺时针旋转" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "水平翻转" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "垂直翻转" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "打开文件" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "ä¿å­˜æ–‡ä»¶" #: ../src/main-win.c:304 msgid "Save File As" msgstr "å¦å­˜ä¸ºæ–‡ä»¶" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "删除文件" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "首选项" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "退出" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "åœæ­¢å¹»ç¯ç‰‡æ”¾æ˜ " #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "您所选的文件å称已ç»å­˜åœ¨ã€‚\n" "您是å¦æƒ³è¦è¦†ç›–原有文件？\n" "(警告：原图片的å“è´¨å¯èƒ½ä¼šæŸå¤±)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "ä¸æ”¯æŒå†™å…¥æ­¤å›¾åƒæ ¼å¼ã€‚" #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "你是å¦ç¡®å®šè¦åˆ é™¤å½“å‰æ–‡ä»¶ï¼Ÿ\n" "\n" "警告：一旦删除，文件就无法æ¢å¤ã€‚" #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "开始/åœæ­¢å¹»ç¯ç‰‡æ”¾æ˜ " #: ../src/main-win.c:1456 msgid "Save As" msgstr "å¦å­˜ä¸º" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "显示/éšè—工具æ " #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * å‚考 EOG åŠ GThumb çš„æºä»£ç " #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "程任全(cheng) \n" "商æºçº¯ <05281253@bjtu.edu.cn>\n" "Wylmer Wang " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "版æƒæ‰€æœ‰ (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "æ¥è‡ª LXDE 计划的轻巧图片查看器" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicview å°†æˆä¸ºæ‚¨ç³»ç»Ÿä¸­æ‰€æœ‰è¢«æ”¯æŒçš„图片的默认查看器。\n" "(这是通过“xdg-mimeâ€ç¨‹åºå®žçŽ°çš„)\n" "\n" "您是å¦ç¡®å®šè¦è¿™ä¹ˆåšï¼Ÿ" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "所有支æŒçš„图åƒ" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "全部文件" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG è´¨é‡ï¼š" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "较低的质é‡å€¼å°†ä¼šå¸¦æ¥è¾ƒå°çš„文件大å°ï¼Œ\n" "但是质é‡å°†ä¼šæ›´å·®ã€‚" #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG 压缩级别：" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "较高的压缩级别将会å‡å°‘文件大å°ï¼Œ\n" "但压缩的时间将会加长。" #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "è½»æ¾æŸ¥çœ‹æ•°ç ç›¸ç‰‡å’Œå›¾ç‰‡" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "ä¿å­˜å›¾ç‰‡å‰å…ˆè¯¢é—®" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "删除图片å‰å…ˆè¯¢é—®" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "自动ä¿å­˜ç»è¿‡æ—‹è½¬çš„图åƒ" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "通过更改 EXIF æ–¹å‘值旋转 JPEG 文件\n" "(仅当 EXIF æ–¹å‘标记存在时)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "å¹»ç¯ç‰‡æ”¾æ˜ é—´éš”" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "秒" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "设置 GPicview 为默认图片查看器" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "普通：" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "å…¨å±å¹•ï¼š" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "背景颜色" gpicview-0.2.4/po/sv.po0000644000000000000000000001631212231705732011634 00000000000000# Translation of gpicview to Swedish # Copyright (C) 2009 Martin Bagge # This file is distributed under the same license as the gpicview package. # # Martin Bagge , 2009. msgid "" msgstr "" "Project-Id-Version: gpicview\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-09-23 14:38+0200\n" "Last-Translator: Martin \n" "Language-Team: Swedish \n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.0.5\n" "X-Poedit-Language: Swedish\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[FIL]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Skriv ut versionsinformation och avsluta" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Starta bildspel" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Bildvisare" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "FöregÃ¥ende" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Nästa" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Starta bildspel" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Zooma ut" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Zooma in" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Anpassa bild till fönstrets storlek" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Originalstorlek" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Helskärm" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Rotera motsols" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Rotera medsols" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Vänd vÃ¥grätt" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Rotera lodrätt" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Öppna fil" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Spara fil" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Spara fil som" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Ta bort fil" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Inställningar" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Avsluta" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Avsluta bildspel" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Filnamnet du valde finns redan.\n" "Vill du skriva över den existerande filen?\n" "(Varning: originalfilens kvalité kan förloras)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Stöd för skrivning till det här bildformatet saknas." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Vill du verkligen ta bort aktuell fil?\n" "\n" "Varning: Borttagna filer kan inte Ã¥terställas." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Starta/Avsluta bildspel" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Spara som" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Visa/Dölj verktygsrad" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Se källkoden för EOG image viewer och GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Martin Bagge \n" "\n" "Synpunkter pÃ¥ översättningen skickas till:\n" "" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright © 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Lättviktig bildvisare frÃ¥n LXDE-projektet" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView kommer att bli systemets standardvisare för alla bildformat som " "stöds.\n" "(Detta görs genom programmet \"xdg-mime\")\n" "\n" "Är du säker pÃ¥ att du verkligen vill göra detta?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Alla bilder som kan visas" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Alla filer" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG-kvalité:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Lägre värden pÃ¥ kvalité innebär att filstorleken blir\n" "mindre men även att bildkvalitén blir sämre." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "KompressionsnivÃ¥ för PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Högre kompressionsnivÃ¥ innebär mindre\n" "filstorlek men tar längre tid att genomföra." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Visa dina bilder enkelt" # dubbelspace, rapporterat per mail #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "FrÃ¥ga innan bilder sparas" # dubbelspace, rapporterat per mail #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "FrÃ¥ga innan bilder raderas" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Spara roterade bilder automatiskt" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Rotera bilder genom att uppdatera EXIF-värdet för rotering\n" "(endast om EXIF-etiketten för rotering existerar)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Bildintervall vid bildspel" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "sek" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Gör GPicview till standardvisare för bilder" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normal:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Helskärm:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Bakgrundsfärg" #~ msgid " Full Screen" #~ msgstr " Helskärm" gpicview-0.2.4/po/cs.po0000644000000000000000000001626612231705732011621 00000000000000# gpicview Czech translation # Ivan Masár , 2007. # Michal Várady , 2009 # msgid "" msgstr "" "Project-Id-Version: gpicview 0.1.3\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-10-09 17:55+0200\n" "Last-Translator: ALIUM \n" "Language-Team: \n" "Language: cs\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" "X-Generator: Pootle 2.0.5\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[SOUBOR]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Zobrazit Äíslo verze a ukonÄit" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Zahájit prezentaci" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "ProhlížeÄ obrázků" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "PÅ™edchozí" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Další" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Zahájit prezentaci" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Oddálit" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "PÅ™iblížit" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "PÅ™ispůsobit velikost obrázku oknu" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Původní velikost" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Celá obrazovka" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "OtoÄit proti smÄ›ru hodinových ruÄiÄek" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "OtoÄit ve smÄ›ru hodinových ruÄiÄek" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "PÅ™evrátit horizontálnÄ›" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "PÅ™evrátit vertikálnÄ›" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Otevřít soubor" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Uložit soubor" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Uložit soubor jako" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Smazat soubor" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "PÅ™edvolby" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "UkonÄit" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Zastavit prezentaci" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Zvolený název souboru již existuje.\n" "Chcete pÅ™epsat existující soubor?\n" "(Varování: Kvalita původního obrázku se může snížit)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Zápis tohoto formátu obrázku není podporován." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Opravdu chcete smazat vybraný soubor?\n" "\n" "UpozornÄ›ní: Po smazání nebude možné obrázek obnovit." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Zahájit nebo zastavit prezentaci" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Uložit jako" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Zobrazit/skrýt panel nástrojů" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Podívejte se do zdrojového kódu prohlížeÄe obrázků EOG a GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "Ivan Masár, Michal Várady, Jan Dlabal, Alois NeÅ¡por" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "OdlehÄený prohlížeÄ obrázků z projektu LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "Aplikace GPicView bude výchozím prohlížeÄem vÅ¡ech formátů obrázků " "podporovaných systémem.\n" "(Tato akce se provede pomocí aplikace 'xdg-mime')\n" "\n" "Opravdu chcete pokraÄovat?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "VÅ¡echny podporované obrázky" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "VÅ¡echny soubory" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "Kvalita JPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Menší hodnota kvality zmenší velikost souboru,\n" "ale kvalita obrazu bude horší." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "úroveň komprese PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "VÄ›tší komprese zmenší velikost souboru,\n" "ale komprimování zabere více Äasu." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Prohlížejte si svoje obrázky jednoduÅ¡e" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Ptát se pÅ™ed uložením obrázků" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Ptát se pÅ™ed odstranÄ›ním obrázků" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Automaticky ukládat otoÄené obrázky" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "OtoÄit soubor s obrázkem ve formátu JPEG pomocí zmÄ›ny hodnoty pro\n" "orientaci v metadatech EXIF (pouze pokud je tato hodnota již přítomna)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Interval prezentace" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "sekund" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Nastavit aplikaci GPicView jako výchozí prohlížeÄ obrázků" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normální:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Celá obrazovka:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Barvy pozadí" gpicview-0.2.4/po/ms.po0000644000000000000000000001566012231705732011630 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2009-06-07 18:33+0200\n" "Last-Translator: Payne Samad Loh \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: Pootle 1.1.0\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[FAIL]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Informasi versi cetak dan keluar" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Pemapar Imej" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Sebelum" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Selepas" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Sorotan Keluar" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Sorotan Masuk" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Sesuaikan Imej Kepada Saiz Window" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Saiz Asal" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Skrin Penuh" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Putarkan Ikut Jam" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Putarkan Lawan Jam" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Lambungan Keufukan" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Lambungan Ketegakan" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Buka Fail" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Simpan Fail" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Simpan Fail Sebagai" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Padam Fail" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Kegemaran" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Keluar" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Fail yang anda pilih sudah wujud.\n" "Adakah anda mahu tulis gantikan fail yang wujud?\n" "(Amaran: Kualiti imej asal mungkin akan hilang)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Tulisan imej format ini tidak disokong" #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Adakah anda pasti hendak memadam fail kini?\n" "\n" "Amaran: Setelah padam, fail tidak boleh diselamatkan" #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Simpan Sebagai" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Rujuk dari sumber kod pemapar imej EOG dan GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "罗森炳 Payne Samad Loh \n" "Phyz \n" "Umarzuki Bin Mochlis Moktar " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Hakcipta Terpelihara (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Pemapar imej ringan dari projek LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView akan menjadi pemapar default untuk semua fail imej yang disokong " "disistem anda.\n" "(Ini akan disiapkan melalui program 'xdg-mime'\n" "\n" "Adakah anda pasti untuk berbuat demikian?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Semua Imej yang Disokong" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Semua Fail" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "Kualiti JPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Nilaian kualiti lebih rendah menghasilkan fail saiz yang lebih kecil, \n" "tetapi kualiti imej akan terjejas." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "Tahap Mampatan PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Tahap mampatan lebih tinggi menghasilkan fail saiz yang lebih kecil,\n" "tetapi memakan lebih banyak masa untuk membuat mampatan" #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Tanya sebelum simpankan imej" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Tanya sebelum memadamkan imej" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Simpan imej yang diputar secara automatik" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Putarkan fail JPEG dengan menukarkan nilai orientasi EXIF,\n" "(hanya jika tag EXIF wujud)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "" # ingkar? #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Jadikan GPicView sebagai pemapar default untuk imej" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normal:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "SkrinPenuh:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Warna-warna latarbelakang" gpicview-0.2.4/po/fr.po0000644000000000000000000001717712231705732011625 00000000000000# French translation of GPicView. # Copyright (C) 2007-2008 洪任諭 (Hon Jen Yee, aka PCMan) # This file is distributed under the same license as the GPicView package. # # ElGeneralMidi , 2007. # Robert-André Mauchin , 2008. # msgid "" msgstr "" "Project-Id-Version: gpicview r846\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2013-08-12 19:09+0000\n" "Last-Translator: Julien \n" "Language-Team: GNOME French Team \n" "Language: fr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n > 1);\n" "X-Generator: Pootle 2.5.0\n" "X-POOTLE-MTIME: 1376334568.0\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[FICHIER]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Affiche les informations de version et quitte" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Démarrer le diaporama" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Visionneur d'images" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Précédent" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Suivant" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Démarrer le diaporama" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Zoom arrière" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Zoom avant" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Ajuster l'image à la taille de la fenêtre" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Taille originale" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Plein écran" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Pivoter vers la gauche" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Pivoter vers la droite" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Pivoter horizontalement" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Pivoter verticalement" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Ouvrir un fichier" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Enregistrer le fichier" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Enregistrer le fichier sous" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Supprimer le fichier" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Préférences" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Quitter" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Arrêter le diaporama" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Un fichier portant le nom choisi existe déjà.\n" "Voulez-vous remplacer le fichier existant ?\n" "(Attention : La qualité de l'image originale pourrait être perdue)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Ce format d'image n'est pas pris en charge en écriture." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Voulez-vous vraiment supprimer le fichier actuel ?\n" "\n" "Avertissement : Une fois supprimé, le fichier ne pourra pas être récupéré." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Démarrer/Arrêter le diaporama" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Enregistrer sous" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Afficher/Masquer la barre d'outils" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Se réfère au code source du visionneur d'images EOG et GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "ElGeneralMidi \n" "Robert-André Mauchin \n" "Cilyan Olowen " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Visionneur d'images léger du projet LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView deviendra le visionneur d'images par défaut pour tous les types " "d'images pris en charge sur votre système.\n" "(Ceci sera effectué grâce au programme « xdg-mime ».)\n" "\n" "Voulez-vous vraiment effectuer ceci ?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Toutes les images prises en charge" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Tous les fichiers" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "Qualité JPEG :" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Une valeur plus petite entrainera un fichier plus petit,\n" "mais la qualité de l'image sera plus faible." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "Niveau de compression PNG :" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Un niveau de compression plus élevé entrainera un fichier plus petit,\n" "mais le temps de compression sera également plus élevé." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Visionner des images facilement" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Demander avant d'enregistrer des images" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Demander avant de supprimer des images" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Enregistrer automatiquement les images pivotées" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Pivoter les images JPEG en modifiant la valeur EXIF de l'orientation.\n" "(Uniquement si le champ EXIF orientation est présent.)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Intervalle entre les diapo." #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "s" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Définir GPicview comme visionneur d'images par défaut" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normal :" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Plein écran :" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Couleurs d'arrière-plan" gpicview-0.2.4/po/it.po0000644000000000000000000001673412231705732011630 00000000000000# Translation of gpicview to Italian # Copyright (C) 2009 Fabio Barone # This file is distributed under the same license as the gpicview package # Fabio Barone , 2009 # Andrea Florio , 2010. # Daniele Forsi , 2012. msgid "" msgstr "" "Project-Id-Version: gpicview 0.1.11\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-10-17 14:14+0200\n" "Last-Translator: Daniele \n" "Language-Team: Italian\n" "Language: it\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.0.5\n" "X-Poedit-Language: Italian\n" "X-Poedit-Country: ITALY\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[FILE]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Stampa informazioni sulla versione ed esce" # descrizione riga di comando #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Avvia la presentazionze" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Visualizzatore di immagini" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Precedente" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Successiva" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Avvia presentazione" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Riduci ingrandimento" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Aumenta ingrandimento" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Adatta immagine alla finestra" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Dimensione originale" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Schermo intero" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Ruota in senso antiorario" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Ruota in senso orario" # eog traduce Flip->Capovolgi #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Capovolgi orizzontalmente" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Capovolgi verticalmente" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Apri file" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Salva file" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Salva file con nome" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Elimina file" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Preferenze" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Esci" # tooltip #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Ferma la presentazione" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Il file selezionato esiste già.\n" "Sostituire il file esistente?\n" "(Attenzione: La qualità dell'originale potrebbe andare persa)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Il salvataggio in questo formato non è supportato." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Vuoi veramente eliminare questo file?\n" "\n" "Attenzione: Una volta eliminato non è recuperabile." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Avvia/Ferma presentazione" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Salva con nome" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Mostra/Nascondi barra degli strumenti" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Riferirsi al codice originale di EOG image viewer e di GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Fabio Barone \n" "Alessandro Pellizzari \n" "Daniele Forsi " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright © 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Visualizzatore di immagini leggero dal progetto LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView diverrà il visualizzatore predefinito per tutte le immagini " "supportate sul tuo sistema.\n" "(Questo avverrà tramite il programma «xdg-mime»)\n" "\n" "Sei sicuro di volerlo fare?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Tutte le immagini supportate" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Tutti i file" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "Qualità JPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Valori di qualità inferiori comportano un file più piccolo,\n" "ma la qualità dell'immagine sarà inferiore." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "Livello di compressione PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Livelli di compressione più alti comportano file più piccoli,\n" "ma i tempi di salvataggio e caricamento potranno essere maggiori." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Visualizza facilmente le tue immagini" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Chiedi prima di salvare immagini" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Chiedi prima di eliminare immagini" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Salva automaticamente immagini ruotate" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Ruota JPEG modificando il valore di orientamento EXIF\n" "(solo se la voce orientamento EXIF esiste)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Intervallo presentazione" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "sec" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Rendi GPicView il visualizzatore predefinito per immagini" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normale:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Schermo intero:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Colori di sfondo" gpicview-0.2.4/po/hu.po0000644000000000000000000001631412231705732011622 00000000000000# Hungarian translation of gpicview. # Copyright (C) 2007-2010 The LXDE Team # This file is distributed under the same license as the gpicview package. # Attila Szervac , 2008-2009. # Zsolt Peter Basak , 2009. # Laszlo Dvornik , 2010. # msgid "" msgstr "" "Project-Id-Version: gpicview\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2010-01-27 17:43+0100\n" "Last-Translator: Laszlo Dvornik \n" "Language-Team: Hungarian \n" "Language: hu\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[FÃJL]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Verzióinformáció kiírása és kilépés" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Diavetítés indítása" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "KépmegjelenítÅ‘" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "ElÅ‘zÅ‘" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "KövetkezÅ‘" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Diavetítés indítása" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Kicsinyítés" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Nagyítás" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Kép igazítása az ablak méretéhez" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Eredeti méret" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Teljes képernyÅ‘" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Forgatás balra" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Forgatás jobbra" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Vízszintes tükrözés" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "FüggÅ‘leges tükrözés" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Megnyitás" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Mentés" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Mentés másként" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Törlés" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Beállítások" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Kilépés" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Diavetítés leállítása" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "A kiválasztott fájlnév már létezik.\n" "Felülírod a létezÅ‘ fájlt?\n" "(Figyelmeztetés: Az eredeti kép minÅ‘sége romolhat.)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Ezen képformátum írása nem támogatott." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Valóban törölni akarod a jelenlegi fájlt?\n" "\n" "Figyelmeztetés: Törlés után a fájlt nem lehet visszaállítani." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Diavetítés indítása/leállítása" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Mentés másként" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Lásd az EOG és a GThumb képmegjelenítÅ‘ forráskódját" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Basák Péter Zsolt \n" "Dvornik László \n" "Szervác Attila " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Pehelysúlyú képmegjelenítÅ‘ az LXDE projekthez" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "A GPicView lesz az alapértelmezett megjelenítÅ‘ a támogatott képfájlokhoz a " "rendszereden.\n" "(Az 'xdg-mime' program futtatását követÅ‘en)\n" "\n" "Valóban ezt akarod?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Támogatott képek" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Minden fájl" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG-minÅ‘ség:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Az alacsonyabb minÅ‘ségértékek kisebb fájlméretet eredményeznek,\n" "de a kép minÅ‘sége rosszabb lesz." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG tömörítési szint:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "A magasabb tömörítési szintek kisebb fájlméretet eredményeznek,\n" "de tovább tart a tömörítés." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Képek megtekintése egyszerűen" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Kérdés a képek mentése elÅ‘tt" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Kérdés a képek törlése elÅ‘tt" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Az elforgatott képek automatikus mentése" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "JPEG-fájl elforgatása az EXIF tájolási értékének cseréjével\n" "(csak ha az EXIF tájolási tag létezik)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Diavetítés idÅ‘köze" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "mp" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Legyen a GPicView az alapértelmezett képmegjelenítÅ‘" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normál:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Teljes képernyÅ‘:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Háttérszínek" gpicview-0.2.4/po/id.po0000644000000000000000000001645712231705732011612 00000000000000# Indonesian translation of GPicView. # Copyright (C) 2007-2008 ??? (Hon Jen Yee, aka PCMan) # This file is distributed under the same license as the GPicView package. # Andhika Padmawan , Rahman Yusri Aftian , 2009. # msgid "" msgstr "" "Project-Id-Version: GPicView\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-10-01 02:27+0200\n" "Last-Translator: Andika \n" "Language-Team: Indonesian \n" "Language: id\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Pootle 2.0.5\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[BERKAS]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Cetak informasi versi dan keluar" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Mulai pertunjukan salindia" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Penampil Citra" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Sebelumnya" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Selanjutnya" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Mulai Pertunjukan Salindia" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Perkecil" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Perbesar" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Paskan Citra Ke Ukuran Jendela" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Ukuran Sebenarnya" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Layar Penuh" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Putar Berlawanan Arah Jarum Jam" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Putar Searah Jarum Jam" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Balikkan Mendatar" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Balikkan Tegak" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Buka Berkas" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Simpan Berkas" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Simpan Berkas Sebagai" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Hapus Berkas" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Preferensi" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Keluar" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Hentikan Pertunjukan Salindia" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Nama berkas yang Anda pilih telah ada.\n" "Apakah Anda ingin menimpa berkas yang telah ada?\n" "(Peringatan: Kualitas citra asli mungkin hilang)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Menulis ke format gambar ini tidak didukung." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Apakah Anda yakin ingin menghapus berkas saat ini?\n" "\n" "Peringatan: Sekali dihapus, berkas tak dapat dikembalikan." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Mulai/Berhenti Pertunjukan Salindia" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Simpan Sebagai" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Tampilkan/sembunyikan bilah alat" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr "* Merujuk ke kode program penampil citra EOG dan GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Andika Padmawan , 2009.\n" "Aftian , 2009.\n" "Andika Triwidada , 2012." #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Hak Cipta (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Penampil citra ringan dari proyek LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView akan menjadi penampil standar untuk semua berkas citra yang " "didukung di sistem Anda.\n" "(Ini akan dilakukan melalui program 'xdg-mime')\n" "\n" "Apakah Anda yakin ingin melakukan ini?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Semua Citra Yang Didukung" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Semua Berkas" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "Kualitas JPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Kualitas yang lebih rendah menghasilkan ukuran berkas yang lebih kecil,\n" "tetapi mutu gambar akan lebih jelek." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "Tingkat Kompresi PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Tingkat kompresi yang lebih tinggi menghasilkan ukuran berkas yang lebih " "kecil,\n" "tetapi perlu waktu lebih lama untuk melakukan kompresi." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Lihat gambar Anda dengan mudah" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Tanya sebelum menyimpan citra" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Tanya sebelum menghapus citra" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Simpan secara otomatis citra yang diputar" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Putar berkas JPEG dengan menukar nilai orientasi EXIF\n" "(hanya jika tag orientasi EXIF ada)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Interval salindia" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "det" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Buat GPicview penampil standar untuk citra" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normal:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Layar Penuh:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Warna latar" gpicview-0.2.4/po/lt.po0000644000000000000000000001654612231705732011634 00000000000000# # Algimantas MargeviÄius , 2012. # msgid "" msgstr "" "Project-Id-Version: GPicView\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2013-07-28 08:00+0000\n" "Last-Translator: Algimantas \n" "Language-Team: Lietuvių <>\n" "Language: lt\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && (n%" "100<10 || n%100>=20) ? 1 : 2);\n" "X-Generator: Pootle 2.5.0\n" "X-POOTLE-MTIME: 1374998443.0\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[FAILAS]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Parodyti versijos informacijÄ… ir iÅ¡eiti" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "PradÄ—ti skaidrių peržiÅ«rÄ…" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "PaveikslÄ—lių peržiÅ«ros programa" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Ankstesnis" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Sekantis" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "PradÄ—ti skaidrių peržiÅ«rÄ…" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Atitolinti" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Priartinti" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Priderinti paveikslÄ—lį prie lango dydžio" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Originalus dydis" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Per visÄ… ekranÄ…" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Pasukti prieÅ¡ laikrodžio rodyklÄ™" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Pasukti pagal laikrodžio rodyklÄ™" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Apversti horizontaliai" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Apversti vertikaliai" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Atverti failÄ…" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "IÅ¡saugoti failÄ…" #: ../src/main-win.c:304 msgid "Save File As" msgstr "IÅ¡saugoti failÄ… kaip" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "IÅ¡trinti failÄ…" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Nustatymai" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "IÅ¡eiti" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Sustabdyti skaidrių peržiÅ«rÄ…" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Pasirinktas failas jau egzistuoja.\n" "Ar norite pakeisti egzistuojantį failÄ…?\n" "(PerspÄ—jimas: originalaus paveikslÄ—lio kokybÄ— gali bÅ«ti prarasta)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Saugojimas Å¡iuo formatu nepalaikomas." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Ar tikrai norite iÅ¡trinti šį failÄ…?\n" "\n" "PerspÄ—jimas: iÅ¡trynus jo nebepavyks atkurti." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "PradÄ—ti/sustabdyti skaidrių peržiÅ«rÄ…" #: ../src/main-win.c:1456 msgid "Save As" msgstr "IÅ¡saugoti kaip" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Rodyti/SlÄ—pti įrankinÄ™" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr "* ŽiÅ«rÄ—kite EOG paveikslÄ—lių žiÅ«ryklÄ—s ir GThumb pirminius tekstus" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Joshas \n" "Julius Vitkauskas \n" "Algimantas MargeviÄius " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "AutorinÄ—s teisÄ—s (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Lengva LXDE projekto paveikslÄ—lių peržiÅ«ros programa" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView taps numatytaja paveikslÄ—lių peržiÅ«ros programa. Ja bus atidaromi " "visi palaikomi paveikslÄ—lių failai.\n" "(Tai bus padaryta naudojant „xdg-mime“ programÄ…)\n" "\n" "Ar tikrai norite tai atlikti?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Visi palaikomi paveikslÄ—liai" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Visi failai" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG kokybÄ—:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "ŽemesnÄ—s kokybÄ—s paveikslÄ—liai užima mažiau vietos,\n" "bet jų kokybÄ— atitinkamai prastesnÄ—." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG suspaudimo lygis:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Labiau suspausti paveikslÄ—liai užima mažiau vietos,\n" "taÄiau didesniam suspaudimui reikia daugiau laiko." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Lengvai peržiÅ«rÄ—kite paveikslÄ—lius" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Paklausti prieÅ¡ iÅ¡saugant paveikslÄ—lius" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Paklausti prieÅ¡ iÅ¡trinant paveikslÄ—lius" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "AutomatiÅ¡kai iÅ¡saugoti pasuktus paveikslÄ—lius" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Pasukant ir apverÄiant pakeisti EXIF orientacijos reikÅ¡mÄ™\n" "(jei ji egzistuoja)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Skaidrių keitimo intervalas" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "s" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Padaryti GPicview numatytaja paveikslÄ—lių peržiÅ«ros programa" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normalus:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Per visÄ… ekranÄ…:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Fono spalvos" gpicview-0.2.4/po/ur_PK.po0000644000000000000000000002023312231705732012221 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: gpicview\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2009-05-20 10:09+0500\n" "Last-Translator: Muhammad Ali Makki \n" "Language-Team: Urdu \n" "Language: ur\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Poedit-Language: Urdu\n" "X-Poedit-Country: PAKISTAN\n" "X-Poedit-SourceCharset: utf-8\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[Ùائل]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "ورژن Ú©ÛŒ معلومات طبع کر Ú©Û’ برخاست کریں" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "تصاویر منظرکار" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "سابقÛ" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "اگلا" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "دور کریں" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "نزدیک کریں" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "تصویر Ú©Ùˆ ونڈو Ú©Û’ حجم پر لائیں" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "اصل حجم" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "پوری سکرین" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Ú¯Ú¾Ú‘ÛŒ Ú©Û’ عکس گھمائیں" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Ú¯Ú¾Ú‘ÛŒ Ú©ÛŒ سمت گھمائیں" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "اÙÙ‚ÛŒ گھمائیں" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "عمودی گھمائیں" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Ùائل کھولیں" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Ùائل محÙوظ کریں" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Ùائل محÙوظ کریں بنام" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Ùائل حذ٠کریں" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "ترجیحات" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "برخاست" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Ùائل کا نام جو آپ Ù†Û’ منتخب کیا ÛÛ’ ÙˆÛ Ù¾ÛÙ„Û’ ÛÛŒ موجود ÛÛ’.\n" "کیا آپ Ø³Ø§Ø¨Ù‚Û Ùائل پر لکھنا چاÛتے Ûیں؟\n" "(انتباÛ: اصل تصویر Ú©ÛŒ کوالٹی خراب Ûوسکتی ÛÛ’)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "تصویر Ú©Û’ اس Ùارمیٹ Ú©Ùˆ Ù„Ú©Ú¾Ù†Û’ Ú©ÛŒ معاونت Ù†Ûیں ÛÛ’." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "کیا آپ واقعی Ø­Ø§Ù„ÛŒÛ Ùائل Ú©Ùˆ حذ٠کرنا چاÛتے Ûیں؟\n" "\n" "انتباÛ: حذ٠Ûونے Ú©Û’ بعد Ùائل Ø¯ÙˆØ¨Ø§Ø±Û Ø­Ø§ØµÙ„ Ù†Ûیں Ú©ÛŒ جاسکے Ú¯ÛŒ." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "" #: ../src/main-win.c:1456 msgid "Save As" msgstr "محÙوظ بنام" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * ای او جی EOG اور GThumb تصاویر منظر کاروں کا مصدر Ú©ÙˆÚˆ دیکھیے" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "محمد علی Ù…Ú©ÛŒ\n" "makki.ma@gmail.com\n" "اردو کوڈر لینکس Ùورم\n" "http://www.urducoder.com\n" "Ù…Ú©ÛŒ کا بلاگ\n" "http://makki.urducoder.com" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "جی پیک ویو" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "کاپی رائٹ (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Ûلکا پھلکا تصاویر منظر کار برائے ایل ایکس ÚˆÛŒ ای پراجیکٹ" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "جی پیک ویو آپ Ú©Û’ نظام میں معاونت رکھنے والی تمام تصاویر Ùائلوں کا Ø·Û’ Ø´Ø¯Û " "تصاویر منظرکار بننے جارÛا ÛÛ’.\n" "(ÛŒÛ 'xdg-mime' پروگرام Ú©Û’ ذریعے انجام دیا جائے گا)\n" "\n" "کیا آپ واقعی ایسا کرنا چاÛتے Ûیں؟" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "تمام معاون تصاویر" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "تمام Ùائلیں" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG کوالٹی:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Ú©Ù… کوالٹی قدروں سے Ú©Ù… حجم Ú©ÛŒ Ùائلیں حاصل Ûوتی Ûیں،\n" "مگر تصویر Ú©ÛŒ کوالٹی Ú©Ù… Ûوجاتی ÛÛ’." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG دباؤ درجÛ:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Ø²ÛŒØ§Ø¯Û Ø¯Ø¨Ø§Ø¤ سے Ú©Ù… حجم Ú©ÛŒ Ùائلیں حاصل Ûوتی Ûیں،\n" "مگر دبانے میں Ø²ÛŒØ§Ø¯Û ÙˆÙ‚Øª صر٠Ûوتا ÛÛ’." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "تصاویر محÙوظ کرنے سے Ù¾ÛÙ„Û’ پوچھیں" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "تصاویر Ú©Ùˆ حذ٠کرنے سے Ù¾ÛÙ„Û’ سے پوچھیں" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "گھمائی گئی تصاویر Ú©Ùˆ خودکار طور پر محÙوظ کریں" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "JPEG Ú©Ùˆ EXIF جÛتیابی قدر تبدیل کر Ú©Û’ کھمائیں\n" "(صر٠اگر EXIF جÛتیابی ٹیک موجود Ûوا)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "جی پیک ویو Ú©Ùˆ تصاویر Ú©Û’ لیے Ø·Û’ Ø´Ø¯Û ØªØµØ§ÙˆÛŒØ± منظرکار بنائیں" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "سادÛ:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "پوری سکرین:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "پس منظر رنگ" #~ msgid " Full Screen" #~ msgstr "پوری سکرین" gpicview-0.2.4/po/pl.po0000644000000000000000000001645112231705732011623 00000000000000# gpicview polish translation # Copyright (C) 2009 THE GPicView'S COPYRIGHT HOLDER # This file is distributed under the same license as the GPicView package. # Grzegorz Gibas , 2007, 2008, 2009. # Piotr Sokół , 2009. # msgid "" msgstr "" "Project-Id-Version: pl\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2013-08-27 10:29+0000\n" "Last-Translator: Piotr \n" "Language-Team: Polish\n" "Language: pl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 " "|| n%100>=20) ? 1 : 2);\n" "X-Generator: Pootle 2.5.0\n" "X-POOTLE-MTIME: 1377599346.0\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[PLIK]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Wypisuje informacje o wersji i koÅ„czy program" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Rozpocznij prezentacjÄ™" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "PrzeglÄ…darka obrazów" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Poprzedni" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "NastÄ™pny" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Rozpocznij prezentacjÄ™" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Pomniejsz" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "PowiÄ™ksz" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Dopasuj do rozmiaru okna" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "ZwykÅ‚y rozmiar" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "PeÅ‚ny ekran" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Obróć w lewo" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Obróć w prawo" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Odbij poziomo" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Odbij pionowo" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Otwórz plik" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Zapisz" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Zapisz plik jako" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "UsuÅ„" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Preferencje" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "ZakoÅ„cz" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Zatrzymaj prezentacjÄ™" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Plik o wprowadzonej nazwie już istnieje.\n" "Nadpisać istniejÄ…cy plik?\n" "(Uwaga: jakość obrazu może ulec pogorszeniu.)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Zapisywanie do tego formatu nie jest obsÅ‚ugiwane." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Usunąć bieżący plik?\n" "\n" "Uwaga: usuniÄ™tego pliku nie bÄ™dzie można odzyskać." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Rozpocznij/zatrzymaj prezentacjÄ™" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Zapisz jako" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Pokaż/ukryj pasek narzÄ™dzi" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Korzysta z kodu przeglÄ…darek obrazów EOG oraz GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Grzegorz Gibas \n" "Piotr Sokół 2010.\n" "Artur Kruszewski " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Prawa autorskie (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "PrzeglÄ…darka obrazów dla Å›rodowiska LXDE" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "Program GPicView stanie siÄ™ domyÅ›lnÄ… przeglÄ…darkÄ… dla wszystkich " "obsÅ‚ugiwanych obrazów w systemie.\n" "(Operacja zostanie wykonana przy użyciu programu 'xdg-mime')\n" "\n" "Kontynuować?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "ObsÅ‚ugiwane pliki" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Wszystkie pliki" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "Jakość JPEG:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Niższa wartość zapewnia mniejszÄ… objÄ™tość pliku i\n" "jednoczeÅ›nie gorszÄ… jakość obrazu." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "Poziom kompresji PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Wyższy poziom kompresji zapewnia mniejszÄ… objÄ™tość pliku i\n" "jednoczeÅ›nie wydÅ‚uża czas kompresji." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "WyÅ›wietla obrazy" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "WyÅ›wietlanie dialogu potwierdzenia przed zapisaniem pliku" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "WyÅ›wietlanie dialogu potwierdzenia przed usuniÄ™ciem pliku" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Automatyczne zapisywanie obróconych obrazów" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Obracanie plików JPEG poprzez zmianÄ™ wartoÅ›ci orientacji EXIF\n" "(tylko jeÅ›li istnieje etykieta orientacji EXIF)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Czas przejÅ›cia pomiÄ™dzy slajdami prezentacji" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "s" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Ustaw jako domyÅ›lnÄ… przeglÄ…darkÄ™ obrazów" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normalny:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "PeÅ‚ny ekran:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Kolory tÅ‚a" gpicview-0.2.4/po/nb.po0000644000000000000000000001614212231705732011604 00000000000000# Norwegian translations for gpicview package. # Copyright (C) 2008 THE gpicview'S COPYRIGHT HOLDER # This file is distributed under the same license as the gpicview package. # Jon Ole Killie , 2008. # msgid "" msgstr "" "Project-Id-Version: gpicview 0.1.7\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2010-11-04 15:52+0200\n" "Last-Translator: Sam \n" "Language-Team: Norwegian BokmÃ¥l\n" "Language: nb\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.0.5\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[FIL]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Skriv ut versjoninformasjon og avslutt" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Start lysbildefremvisning" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Bildevisning" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Forrige" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Neste" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Start lysbildefremvisning" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Zoom ut" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Zoom inn" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Tilpass bildet til vinduet" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Originalstørrelse" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Fullskjerm" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Roter mot klokken" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Roter med klokken" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Snu horisontalt" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Snu verticalt" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Ã…pne fil" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Lagre fil" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Lagre fil som" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Slett fil" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Innstillinger" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Avslutt" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Avslutt lysbildefremvisning" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Det finnes allerede en fil med angitt filnavn.\n" "Vil du overskrive eksisterende fil?\n" "(Advarsel: Kvaliteten til originalbildet kan gÃ¥ tapt)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Skriving til dette bildeformatet er ikke støttet." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Vil du virkelig slette denne filen?\n" "\n" "Advarsel: Slettede filer kan ikke gjenopprettes." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Start/avslutt lysbildefremvisning" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Lagre som" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Se kildekode for EOG bildevisning og GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Jon Ole Killie\n" "Sam Magnus Wilson" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright (C) 2007-2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "Enkel bildeviser fra LXDE prosjektet" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView vil bli standard bildeviser for alle støttede bilder pÃ¥ systemet.\n" "(Dette utføres ved hjelp av 'xdg-mime' programmet)\n" "\n" "Vil du virkelig gjøre dette?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Alle støttede bilder" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Alle filer" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG-kvalitet:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Lavere verdi gir mindre filstørrelser,\n" "men fører ogsÃ¥ til at bildekvaliteten blir dÃ¥rligere." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG-komprimering:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Høyere komprimering gir mindre filstørrelser,\n" "men det tar ogsÃ¥ lenger tid Ã¥ utføre komprimeringen." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Vis bilder lettvint" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Spør før lagring av bilder" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Spør før sletting av bilder" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Automatisk lagring av roterte bilder" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Roter JPEG-bilder ved Ã¥ endre orientasjonsverdien i filens EXIF\n" "(kun hvis orientasjonsverdi finnes i EXIF-infoen)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Pause mellom hvert bilde" # Ifølge sprÃ¥krÃ¥det kan ogsÃ¥ "s" brukes, men jeg valgte "sek" ettersom det synes litt mer tydelig hva som egentlig menes. #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "sek" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Gjør GPicView til standard bildeviser for alle bilder" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normal:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Fullskjerm:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Bakgrunnsfarger" gpicview-0.2.4/po/ChangeLog0000644000000000000000000000064212231705732012415 000000000000002009-05-26 Og Maciel * pt_BR.po: Updated Brazilian Portuguese translation by Thiago Avelino. 2009-03-12 Og Maciel * pt_BR.po: Updated Brazilian Portuguese translation by Henrique P Machado. 2009-01-27 Ming-Ting Wei * ar.po: Added Arabic translation. 2009-01-25 Mario Blättermann * de_DE.po: Updated German translation gpicview-0.2.4/po/eu.po0000644000000000000000000001604112231705732011614 00000000000000msgid "" msgstr "" "Project-Id-Version: GPicView 0.1.10\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2012-10-27 21:33+0200\n" "Last-Translator: Asier \n" "Language-Team: \n" "Language: eu\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.0.5\n" "X-Poedit-Language: Basque\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[FITXATEGIA]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "Inprimatu bertsio-informazioa eta irten" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "Hasi diapositiba-aurkezpena" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "Irudi ikustailea" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "Aurrekoa" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Hurrengoa" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "Hasi diapositiba-aurkezpena" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "Txikiagotu" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Handiagotu" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "Doitu irudia leihoaren tamainara" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "Jatorrizko tamaina" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "Pantaila osoa" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "Biratu ezkerrera" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "Biratu eskuinera" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Irauli horizontalki" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Irauli bertikalki" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Ireki fitxategia" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Gorde fitxategia" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Gorde fitxategia honela" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "Ezabatu fitxategia" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "Hobespenak" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Irten" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Gelditu diapositiba-aurkezpena" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Hautatu duzun fitxategi-izena dagoeneko existitzen da.\n" "Fitxategia gainidatzi nahi duzu?\n" "(Kontuz: jatorrizko irudiaren kalitatea galdu daiteke)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Ez da onartzen irudi formatu hau gainidaztea." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Ziur zaude uneko fitxategia ezabatu nahi duzula?\n" "\n" "Kontuz: ezabatu ondoren fitxategia ezin da berreskuratu." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "Hasi/Gelditu diapositiba-aurkezpena" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Gorde honela" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "Erakutsi/Ezkutatu tresna-barra" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * Begiratu EOG irudi ikustailearen eta GThumb-en iturburu kodea" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "" "Alain Mendizabal \n" "Asier Iturralde Sarasola " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright-a (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "LXDE proiekturako irudi ikustaile arina" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "GPicView zure sistemako irudi guztien ikustaile lehenetsia izango da\n" "(hau 'xdg-mine' programaren bidez egingo da)\n" "\n" "Ziur zaude hau egin nahi duzula?" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Onartutako irudi guztiak" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Fitxategi guztiak" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG kalitatea:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "Kalitate baxuagoko irudiek fitxategi-tamaina txikiagoa dute,\n" "baina irudien kalitatea baxuagoa da." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG konpresio maila:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "Konpresio maila altuagoko irudiek fitxategi-tamaina txikiagoa dute,\n" "baina konprimaketak denbora gehiago behar du." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "Ikusi zure irudiak modu errazean" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "Galdetu irudiak gorde aurretik" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "Galdetu irudiak ezabatu aurretik" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Gorde automatikoki biratutako irudiak" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "Biratu JPEG fitxategia EXIF orientazioaren balioa aldatuz\n" "(soilik EXIF orientazio-etiketa existitzen bada)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "Diapositiba-aurkezpenaren bitartea" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "seg" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Bihurtu GPicview irudi ikustaile lehenetsia" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Normala:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "Pantaila osoa:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "Atzeko planoko koloreak" gpicview-0.2.4/po/el.po0000644000000000000000000002136012231705732011603 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: gpicview\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2011-02-10 03:24+0200\n" "Last-Translator: George \n" "Language-Team: Greek \n" "Language: el\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.0.5\n" "X-Poedit-Language: Greek\n" "X-Poedit-Country: GREECE\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[ΑΡΧΕΙΟ]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "ΕκτÏπωση πληÏοφοÏιών έκδοσης και έξοδος" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "ΈναÏξη παÏουσίασης" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "ΠÏοβολή εικόνων" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "ΠÏοηγοÏμενο" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "Επόμενο" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "ΈναÏξη παÏουσίασης" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "ΣμίκÏυνση" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "Μεγέθυνση" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "ΠÏοσαÏμογή της εικόνας στο μέγεθος του παÏαθÏÏου" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "ΑÏχικό μέγεθος" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "ΠλήÏης οθόνη" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "ΠεÏιστÏοφή αÏιστεÏά" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "ΠεÏιστÏοφή δεξιά" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "Εναλλαγή οÏιζόντια" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "Εναλλαγή κάθετα" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "Άνοιγμα αÏχείου" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "Αποθήκευση αÏχείου" #: ../src/main-win.c:304 msgid "Save File As" msgstr "Αποθήκευση αÏχείου ως" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "ΔιαγÏαφή αÏχείου" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "ΠÏοτιμήσεις" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "Έξοδος" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "Διακοπή παÏουσίασης" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "Το όνομα αÏχείου που επιλέξατε υπάÏχει ήδη.\n" "Θέλετε να αντικαταστήσετε το υπάÏχον αÏχείο;\n" "(ΠÏοειδοποίηση: Η ποιότητα της αÏχικής εικόνας μποÏεί να χαθεί)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "Η εγγÏαφή τέτοιου Ï„Ïπου εικόνας δεν υποστηÏίζεται." #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "Είστε σίγουÏοι ότι θέλετε να διαγÏάψετε το παÏόν αÏχείο;\n" "\n" "ΠÏοειδοποίηση: Αν διαγÏαφεί το αÏχείο δεν γίνεται να επαναφεÏθεί." #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "ΈναÏξη/Διακοπή ΠαÏουσίασης" #: ../src/main-win.c:1456 msgid "Save As" msgstr "Αποθήκευση ως" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr "* ΑναφοÏά στον πηγαίο κώδικα του EOG image viewer και του GThumb" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "Βασιλάκος ΓιώÏγος " #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 msgid "Copyright (C) 2007 - 2011" msgstr "Copyright (C) 2007 - 2011" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "ΕλαφÏί Ï€ÏόγÏαμμα Ï€Ïοβολής εικόνων από το LXDE project" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" "Ο GPicView θα γίνει το Ï€Ïοεπιλεγμένο Ï€ÏόγÏαμμα Ï€Ïοβολής εικόνων για τους " "υποστηÏιζόμενους Ï„Ïπους αÏχείων στο σÏστημά σας.\n" "(Αυτό θα γίνει μέσο του Ï€ÏογÏάμματος 'xdg-mime')\n" "\n" "Είστε σίγουÏοι ότι θέλετε να το κάνετε αυτό;" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "Όλοι οι υποστηÏιζόμενοι Ï„Ïποι εικόνων" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "Όλα τα αÏχεία" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG ποιότητα:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" "ΜικÏότεÏες τιμές ποιότητας αποδίδουν μικÏότεÏο μέγεθος αÏχείου,\n" "αλλά η ποιότητα είναι πιο φτωχή." #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "Επίπεδο συμπίεσης PNG:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" "ΜεγαλÏτεÏες τιμές συμπίεσης αποδίδουν μικÏότεÏο μέγεθος αÏχείου,\n" "αλλά παίÏνουν πεÏισσότεÏη ÏŽÏα για να συμπιεστοÏν." #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "ΠÏοβάλετε τις εικόνες σας εÏκολα" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "ΕÏώτηση Ï€Ïιν την αποθήκευση αÏχείων" #: ../data/pref-dlg.ui.h:3 msgid "Ask before deleting images" msgstr "ΕÏώτηση Ï€Ïιν τη διαγÏαφή αÏχείων" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "Αυτόματη αποθήκευση εικόνων που έχουν πεÏιστÏαφεί" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" "ΠεÏιστÏοφή του αÏχείου JPEG αλλάζοντας το EXIF Ï€Ïοσανατολισμό\n" "(μόνο αν το πεδίο EXIF Ï€ÏÎ¿ÏƒÎ±Î½Î±Ï„Î¿Î»Î¹ÏƒÎ¼Î¿Ï Ï…Ï€Î¬Ïχει)" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "ΧÏονικό διάστημα παÏουσίασης" #: ../data/pref-dlg.ui.h:8 msgid "sec" msgstr "δευτεÏόλεπτα" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "Κάνε το GPicView το Ï€Ïοεπιλεγμένο Ï€ÏόγÏαμμα Ï€Ïοβολής εικόνων" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "Κανονικά:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "ΠλήÏης οθόνη:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "ΧÏώματα παÏασκηνίου" gpicview-0.2.4/po/bn_IN.po0000644000000000000000000001771212231705732012176 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-09-23 14:36+0200\n" "PO-Revision-Date: 2010-08-30 18:22+0200\n" "Last-Translator: Sankarshan \n" "Language-Team: LANGUAGE \n" "Language: bn_IN\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.0.5\n" #: ../src/gpicview.c:38 msgid "[FILE]" msgstr "[ফাইল]" #: ../src/gpicview.c:40 msgid "Print version information and exit" msgstr "সংসà§à¦•à¦°à¦£ তথà§à¦¯ পà§à¦°à¦¦à¦°à§à¦¶à¦¨ করে পà§à¦°à¦¸à§à¦¥à¦¾à¦¨ করা হবে" #: ../src/gpicview.c:42 msgid "Start slideshow" msgstr "সà§à¦²à¦¾à¦‡à¦¡à¦¶à§‹ আরমà§à¦­ করà§à¦¨" #: ../src/main-win.c:165 ../src/main-win.c:1413 ../gpicview.desktop.in.h:1 msgid "Image Viewer" msgstr "ইমেজ পà§à¦°à¦¦à¦°à§à¦¶à¦•" #: ../src/main-win.c:267 ../src/main-win.c:1438 msgid "Previous" msgstr "পূরà§à¦¬à¦¬à¦°à§à¦¤à§€" #: ../src/main-win.c:268 ../src/main-win.c:1439 msgid "Next" msgstr "পরবরà§à¦¤à§€" #: ../src/main-win.c:269 ../src/main-win.c:754 msgid "Start Slideshow" msgstr "সà§à¦²à¦¾à¦‡à¦¡à¦¶à§‹ শà§à¦°à§ করà§à¦¨" #: ../src/main-win.c:273 ../src/main-win.c:1442 msgid "Zoom Out" msgstr "জà§à¦® আউট করà§à¦¨" #: ../src/main-win.c:274 ../src/main-win.c:1443 msgid "Zoom In" msgstr "জà§à¦® ইন করà§à¦¨" #. percent = gtk_entry_new(); // show scale (in percentage) #. g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); #. gtk_widget_set_size_request( percent, 45, -1 ); #. gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); #: ../src/main-win.c:281 ../src/main-win.c:1444 msgid "Fit Image To Window Size" msgstr "উইনà§à¦¡à§‹à¦° মাপ অনà§à¦¯à¦¾à¦¯à¦¼à§€ রাখà§à¦¨" #: ../src/main-win.c:283 ../src/main-win.c:1445 msgid "Original Size" msgstr "আসল মাপ" #: ../src/main-win.c:290 ../src/main-win.c:1447 msgid "Full Screen" msgstr "পà§à¦°à§‹ পরà§à¦¦à¦¾ জà§à¦¡à¦¼à§‡" #: ../src/main-win.c:294 ../src/main-win.c:1449 msgid "Rotate Counterclockwise" msgstr "ঘড়ির উলà§à¦Ÿà§‹à¦¦à¦¿à¦•à§‡ ঘà§à¦¡à¦¼à¦¿à¦¯à¦¼à§‡ নিন" #: ../src/main-win.c:295 ../src/main-win.c:1450 msgid "Rotate Clockwise" msgstr "ঘড়ির কাà¦à¦Ÿà¦¾ অনà§à¦¯à¦¾à¦¯à¦¼à§€ ঘà§à¦¡à¦¼à¦¿à¦¯à¦¼à§‡ নিন" #: ../src/main-win.c:297 ../src/main-win.c:1451 msgid "Flip Horizontal" msgstr "অনà§à¦­à§‚মিক ভাবে ঘà§à¦¡à¦¼à¦¿à¦¯à¦¼à§‡ নিন" #: ../src/main-win.c:298 ../src/main-win.c:1452 msgid "Flip Vertical" msgstr "উলমà§à¦¬à¦­à¦¾à¦¬à§‡ ঘà§à¦¡à¦¼à¦¿à¦¯à¦¼à§‡ নিন" #: ../src/main-win.c:302 ../src/main-win.c:1454 msgid "Open File" msgstr "ফাইল খোলা হবে" #: ../src/main-win.c:303 ../src/main-win.c:1455 msgid "Save File" msgstr "ফাইল সংরকà§à¦·à¦£ করা হবে" #: ../src/main-win.c:304 msgid "Save File As" msgstr "à¦à¦‡ নামে ফাইল সংরকà§à¦·à¦£ করা হবে" #. PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), #: ../src/main-win.c:305 ../src/main-win.c:1458 msgid "Delete File" msgstr "ফাইল মà§à¦›à§‡ ফেলা হবে" #: ../src/main-win.c:308 ../src/main-win.c:1460 ../data/pref-dlg.ui.h:1 msgid "Preferences" msgstr "পছনà§à¦¦" #: ../src/main-win.c:309 ../src/main-win.c:1464 msgid "Quit" msgstr "পà§à¦°à¦¸à§à¦¥à¦¾à¦¨ করà§à¦¨" #: ../src/main-win.c:762 msgid "Stop Slideshow" msgstr "সà§à¦²à¦¾à¦‡à¦¡à¦¶à§‹ বনà§à¦§ করà§à¦¨" #: ../src/main-win.c:1303 msgid "" "The file name you selected already exists.\n" "Do you want to overwrite existing file?\n" "(Warning: The quality of original image might be lost)" msgstr "" "আপনি যে ফাইলের নাম নিরà§à¦¬à¦¾à¦šà¦¨ করেছেন সেটি আগে থেকে অবসà§à¦¥à¦¿à¦¤à¥¤\n" "আপনি কি ওই ফাইল-টি মà§à¦›à§‡ ফেলতে ইচà§à¦›à§à¦• ?\n" "(Warning: The quality of original image might be lost)" #: ../src/main-win.c:1344 msgid "Writing this image format is not supported." msgstr "à¦à¦‡ ছবির ফরà§à¦®à§à¦¯à¦¾à¦Ÿà§‡à¦° জনà§à¦¯ সমরà§à¦¥à¦¨ নেই।" #: ../src/main-win.c:1382 msgid "" "Are you sure you want to delete current file?\n" "\n" "Warning: Once deleted, the file cannot be recovered." msgstr "" "আপনি নিশà§à¦šà¦¿à¦¤ যে বরà§à¦¤à¦®à¦¾à¦¨ ফাইলটি মà§à¦›à§‡ ফেলবেন?\n" "সতরà§à¦•à¦¬à¦¾à¦°à§à¦¤à¦¾: মà§à¦›à§‡ ফেলার পরে ফাইলটি ফিরিয়ে আনা সমà§à¦­à¦¬ নয়।" #: ../src/main-win.c:1440 msgid "Start/Stop Slideshow" msgstr "সà§à¦²à¦¾à¦‡à¦¡à¦¶à§‹ চালà§/বনà§à¦§ করà§à¦¨" #: ../src/main-win.c:1456 msgid "Save As" msgstr "à¦à¦‡ রূপে সংরকà§à¦·à¦£ করà§à¦¨" #: ../src/main-win.c:1461 msgid "Show/Hide toolbar" msgstr "" #: ../src/main-win.c:1505 msgid " * Refer to source code of EOG image viewer and GThumb" msgstr " * EOG image viewer à¦à¦¬à¦‚ GThumb à¦à¦° সোরà§à¦¸ কোড দেখে নিন" #. TRANSLATORS: Replace this string with your names, one name per line. #: ../src/main-win.c:1509 msgid "translator-credits" msgstr "সঙà§à¦•à¦°à§à¦·à¦£ মà§à¦–োপাধà§à¦¯à¦¾à¦¯à¦¼" #: ../src/main-win.c:1515 msgid "GPicView" msgstr "GPicView" #: ../src/main-win.c:1517 #, fuzzy msgid "Copyright (C) 2007 - 2011" msgstr "সতà§à¦¤à§à¦¬à¦¾à¦§à¦¿à¦•à¦¾à¦° (C) ২০০৭ - ২০০৯" #: ../src/main-win.c:1518 msgid "Lightweight image viewer from LXDE project" msgstr "LXDE পà§à¦°à¦•à¦²à§à¦ªà§‡à¦° à¦à¦•à¦Ÿà¦¿ লাইটওয়েট ইমেজ পà§à¦°à¦¦à¦°à§à¦¶à¦•" #: ../src/pref.c:164 msgid "" "GPicView will become the default viewer for all supported image files on " "your system.\n" "(This will be done through 'xdg-mime' program)\n" "\n" "Are you sure you really want to do this?" msgstr "" #: ../src/file-dlgs.c:62 msgid "All Supported Images" msgstr "সকল সমরà§à¦¥à¦¿à¦¤ ছবি" #: ../src/file-dlgs.c:67 msgid "All Files" msgstr "সকল ফাইল" #: ../src/file-dlgs.c:103 msgid "JPEG Quality:" msgstr "JPEG গà§à¦£à¦®à¦¾à¦¨:" #: ../src/file-dlgs.c:104 msgid "" "Lower quality values yield smaller file sizes,\n" "but the image quality will be poorer." msgstr "" #: ../src/file-dlgs.c:121 msgid "PNG Compression Level:" msgstr "PNG Compression Level:" #: ../src/file-dlgs.c:122 msgid "" "Higher compression levels yield smaller file sizes,\n" "but takes more time to do the compression." msgstr "" #: ../gpicview.desktop.in.h:2 msgid "View your images easily" msgstr "আপনার ছবিগà§à¦²à¦¿ সহজে দেখে নিন" #: ../data/pref-dlg.ui.h:2 msgid "Ask before saving images" msgstr "" #: ../data/pref-dlg.ui.h:3 #, fuzzy msgid "Ask before deleting images" msgstr "ছবি মà§à¦›à§‡ ফেলার আগে জানিয়ে নিন" #: ../data/pref-dlg.ui.h:4 msgid "Automatically save rotated images" msgstr "" #: ../data/pref-dlg.ui.h:5 msgid "" "Rotate JPEG file by changing EXIF orientation value\n" "(only if EXIF orientation tag exists)" msgstr "" #: ../data/pref-dlg.ui.h:7 msgid "Slideshow interval" msgstr "" #: ../data/pref-dlg.ui.h:8 #, fuzzy msgid "sec" msgstr "sec\t" #: ../data/pref-dlg.ui.h:9 msgid "Make GPicView the default viewer for images" msgstr "" #: ../data/pref-dlg.ui.h:10 msgid "Normal:" msgstr "সà§à¦¬à¦¾à¦­à¦¾à¦¬à¦¿à¦•:" #: ../data/pref-dlg.ui.h:11 msgid "Fullscreen:" msgstr "পà§à¦°à§‹ পরà§à¦¦à¦¾ জà§à¦¡à¦¼à§‡:" #: ../data/pref-dlg.ui.h:12 msgid "Background colors" msgstr "" gpicview-0.2.4/gpicview.png0000644000000000000000000000546212231705732012555 00000000000000‰PNG  IHDR00Wù‡sBIT|dˆ éIDAThÕ™KŒ\WZÇß9çÞztUõÃívÇØql™8Àˆ™!‚D#ÄcÁc±e‰X‚F Ј%‚5bÇ!!¤ Á*h„&J¬$ãÈž$~—»º»ªºêÖ½÷œÅ¹õêö£<ã̧nUÝ{^ßóþç”Ûívûʲür–e ~¤^¯eI’¼Ûï~SšÍæ§"rö­·ÞbssóEëv,ÙÙÙáí·ß¦(Šž›ä“Ó¯ýØklooóþûïBxÑú=QŒ1\½z•K—.ñÞ{ï­;ALš¦dYÆ;ï¼ó¢õ;–\¼x‘z½ ò?øýƒ_øù_l¾~õuþófÎ'{–    Æ€ê UzQ~ãuǯó­ýncc=¬v:¬®®ríÞ£|ª< Ÿ‡¿¿XQW§Óé°±±ŽYlŸ/ËS}5ï°dÀZãóáå§ùQäÖYD„f ¶ÚPs?XCš©`ÿKˆÖ:`j€ucØ*A…­68û\t}¤Œr%($Îo ©{¶ñ"à\ä >cð*9d9¤4€×hŒ…Ì„@ê`RÆÉ;u¡‘2ó²1`Äy‚Wú ÆJo äeìsÜ-ÈZƒ³‹X‡ˆáT[ðaš€‚*LÊ• ±Ècþ)RÁláÁš©qÂÉ–’XPFM°N_XIcK”‰Ÿ÷üóñ"Ë#ˆÈ‘A"PO¥GaVuŠÕ< ãL£±REÀ ¶Š‚ Š5Ði÷ûŠ•ñ—V…ÄAP蔬XÖË1dSæJD’Jé¢8>¬> úT¡ôJéçó%‰ Að^i$ÐL¢A X‰¶§:¤ˆ™0E'k„i¶-Ь ™Î7´Ê{çªüõÏ.vÎVYêÉr&¤N˜eÉ€VÀQÊ2溔FA£Ç¬S Uây¡‘|ü€7ÄÅé˜1¦sk­…m`Õ0{®úZHa8 U!*Ã1+­&ŠâÄ áó³ˆ1BxÄàÇ"°tŽ7úä<ŽrºÝ]‚÷ˆÉd‚u'ÉÆÃþ./=ËZ§*ø hU!D¤þÕç1–/'*½âl´VX‘¡¨ŠÈÚ ÝÝij¸÷.\»F6Éâž8jµ„z-åÁ'×+˜†ÞÝï£bpµ««tÖ×XÛX§^«ÍÒsÑ3c*×iÍh—"ðáõ›lldmµ;ULÉYYHèv÷¹uãCÊ|Ì`˜qëÓ[øqàKPÅÅC"#Šsà$` ”v„õ¦²?†q.ˆ6N¬sáµ/ñ¥Ÿ}«‚ÙhÏôÓ0×!usÈh,Åÿø§¿§–òIAÒl±zr›Sg¯°yúz÷¿øÚþSùhvÒZƒGcÀ!¥|y,å?‹hP‚/ñEN6ñ°»Ëÿ|tý.Šgýwÿ8ë_E *}æÊÉû;®c¬û‡÷˜ÔbŒðæϼ1K?7Õ_Qîßü€þN7V½±ˆ‰DlÜD@$†-¾¨^™ .ÌÒ³AŒEL5V$¢ØjC´X0cÆ€1k,i-%q—¦ ‚÷Bk­ÃËç΃¹Š¼â¤œ$xÞ3OÁ8õ~æ¶Ôë Š¯þ šÆçY+ŠHB³ÕÂÁX‹s)i½Ic¥C£³J>sÐßg’MÈÆ#²á¡,Ÿ»’Æ:êÍ&ÖV×Ö¨ÕjU‚/Xi¯áj -`Œá§~îWɆ=’Z$­?rrUewo@ïö òqƒnwÉÁàùh.ÐXépêåóœ{å õFcé?ï6¯£¥Øº„f{íÉkˆ°±Þa}ý  8yæ!_ÿ^oç³³Pk6··¹ôo°ÒZyŠóï±”g^\Zí­v‹­3üïïÒ½s çjuG«á0i#-K¼*ž›4°i"/pif«ÍæÉmÒzíx‹ëüp³£S > Ò…ª1K×H31Öqùõ/²}þ ã,¯æ((³!/¿z™ÝÞýÞ}jIʉ­ÓXg"(„ˆ½^ɇ#T§õ(˜ Ѥ"GÖ’Ä-].¥PQìîîQ.L!q1‚Å_±Ä£Ñ36!]Y£ÛÝÅ{O­u€½ýåz ª=ÊIY°(.I©5Vh¯n".YÒÁ‡0'šSÿ+°ÛÛ¡,¿Ãª*yQ‚F>¯ó“[l'ntÄGNTÄøPQÔƒW%#ö>ý.ÙxL(‹%þtÈkÔ+´76Y;ý*ñ&=‡Ö‘"VJïO J(}܃.*óœ$€ÑÀ$‹Dð‰¢J6’† övXß¾@¾!K5ÐÛQ–Ç?± ŠÁCðˆ– ¡ÄheÓlz¢ !P_Y%˜EXß:Å`¿O6Ø=ÖzÙpÀ½pí»×yõÍË T9$A±“‡P¥A@ (¢Uˆ5Tœ%¦AõŠã™¬H(Ùläø>¹»Ožã!èDC {ï襹Q%Û½Iž?ŸŸ˜œ­¶òð@¨INQ–lmF¶;+ÙÁã0ßÃbmÂoÿÖW!ëÎ >²ÌË—¯’å“cLsˆM¢±H«+1†v«…XËVñž©Œhmœ‰Œ©ÆYhu¸ª¨ƒâ)‹‚òË¿þuNuFÑÑòGúM=}j“S'×g ø…#b$Šf¦vXl3ˤBŸ»Œ53¸ö‡ŽœÖ>}>U]ºF1ÕõçTî>Øá~·wôZåöÝ.vö–Þ½òòK´[M>ºq‹Q6P’8®\·îv—æ;wf‹kn|r—þà`n˜1\~å,Ö¾wóÖÒ~Ôj6xõÂé#›éîö—_ˆÐÛ$nIy€¢(éGL&ù’òûý!Þöö™ß9Wkôöé¬4—”‡xW´?8À9{d3ŽÆL&Æ2Ý8 Žp¿câÿ“oä O‹ïŸ½¨Mn~„Ĉ y1¿€·ÕoK2ýÁ9‹5©Òy@â,ÎÙY’Lßc#‘|UדÓ6ç\,òª(§m ¸j¾iƒDcçþžL pÖ觻ûƒ—OoobáÒ…3ìî-.­kc¸xþ4£Q6kª¥ ö ö b ~Gµ[M¬1\8·ÍÃý%¯<±†µ±`ÃÑì½s–«pþÌ©%Ê°²Ò –FRW–ž½þgõ¶üÙ_üåïä¥ùk ë÷Œ¿¸ý%/ z{}BPê©ÿ]QUþäÏ¿ù…¿ A¾ÌÒ-èçOD(è‹ð{ü‡ßxûÿgÈ°§£åIEND®B`‚gpicview-0.2.4/config.h.in0000644000000000000000000000433212231706051012243 00000000000000/* config.h.in. Generated from configure.ac by autoheader. */ /* always defined to indicate that i18n is enabled */ #undef ENABLE_NLS /* Gettext package. */ #undef GETTEXT_PACKAGE /* Define to 1 if you have the `bind_textdomain_codeset' function. */ #undef HAVE_BIND_TEXTDOMAIN_CODESET /* Define to 1 if you have the `dcgettext' function. */ #undef HAVE_DCGETTEXT /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H /* Define if the GNU gettext() function is already present or preinstalled. */ #undef HAVE_GETTEXT /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define if your file defines LC_MESSAGES. */ #undef HAVE_LC_MESSAGES /* Define to 1 if you have the `jpeg' library (-ljpeg). */ #undef HAVE_LIBJPEG /* Define to 1 if you have the header file. */ #undef HAVE_LOCALE_H /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define to the sub-directory in which libtool stores uninstalled libraries. */ #undef LT_OBJDIR /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the home page for this package. */ #undef PACKAGE_URL /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Version number of package */ #undef VERSION gpicview-0.2.4/NEWS0000644000000000000000000000000012231705732010710 00000000000000gpicview-0.2.4/compile0000755000000000000000000001624512231706055011610 00000000000000#! /bin/sh # Wrapper for compilers which do not understand '-c -o'. scriptversion=2012-10-14.11; # UTC # Copyright (C) 1999-2013 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # This file is maintained in Automake, please report # bugs to or send patches to # . nl=' ' # We need space, tab and new line, in precisely that order. Quoting is # there to prevent tools from complaining about whitespace usage. IFS=" "" $nl" file_conv= # func_file_conv build_file lazy # Convert a $build file to $host form and store it in $file # Currently only supports Windows hosts. If the determined conversion # type is listed in (the comma separated) LAZY, no conversion will # take place. func_file_conv () { file=$1 case $file in / | /[!/]*) # absolute file, and not a UNC file if test -z "$file_conv"; then # lazily determine how to convert abs files case `uname -s` in MINGW*) file_conv=mingw ;; CYGWIN*) file_conv=cygwin ;; *) file_conv=wine ;; esac fi case $file_conv/,$2, in *,$file_conv,*) ;; mingw/*) file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` ;; cygwin/*) file=`cygpath -m "$file" || echo "$file"` ;; wine/*) file=`winepath -w "$file" || echo "$file"` ;; esac ;; esac } # func_cl_dashL linkdir # Make cl look for libraries in LINKDIR func_cl_dashL () { func_file_conv "$1" if test -z "$lib_path"; then lib_path=$file else lib_path="$lib_path;$file" fi linker_opts="$linker_opts -LIBPATH:$file" } # func_cl_dashl library # Do a library search-path lookup for cl func_cl_dashl () { lib=$1 found=no save_IFS=$IFS IFS=';' for dir in $lib_path $LIB do IFS=$save_IFS if $shared && test -f "$dir/$lib.dll.lib"; then found=yes lib=$dir/$lib.dll.lib break fi if test -f "$dir/$lib.lib"; then found=yes lib=$dir/$lib.lib break fi if test -f "$dir/lib$lib.a"; then found=yes lib=$dir/lib$lib.a break fi done IFS=$save_IFS if test "$found" != yes; then lib=$lib.lib fi } # func_cl_wrapper cl arg... # Adjust compile command to suit cl func_cl_wrapper () { # Assume a capable shell lib_path= shared=: linker_opts= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as 'compile cc -o foo foo.c'. eat=1 case $2 in *.o | *.[oO][bB][jJ]) func_file_conv "$2" set x "$@" -Fo"$file" shift ;; *) func_file_conv "$2" set x "$@" -Fe"$file" shift ;; esac ;; -I) eat=1 func_file_conv "$2" mingw set x "$@" -I"$file" shift ;; -I*) func_file_conv "${1#-I}" mingw set x "$@" -I"$file" shift ;; -l) eat=1 func_cl_dashl "$2" set x "$@" "$lib" shift ;; -l*) func_cl_dashl "${1#-l}" set x "$@" "$lib" shift ;; -L) eat=1 func_cl_dashL "$2" ;; -L*) func_cl_dashL "${1#-L}" ;; -static) shared=false ;; -Wl,*) arg=${1#-Wl,} save_ifs="$IFS"; IFS=',' for flag in $arg; do IFS="$save_ifs" linker_opts="$linker_opts $flag" done IFS="$save_ifs" ;; -Xlinker) eat=1 linker_opts="$linker_opts $2" ;; -*) set x "$@" "$1" shift ;; *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) func_file_conv "$1" set x "$@" -Tp"$file" shift ;; *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) func_file_conv "$1" mingw set x "$@" "$file" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -n "$linker_opts"; then linker_opts="-link$linker_opts" fi exec "$@" $linker_opts exit 1 } eat= case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: compile [--help] [--version] PROGRAM [ARGS] Wrapper for compilers which do not understand '-c -o'. Remove '-o dest.o' from ARGS, run PROGRAM with the remaining arguments, and rename the output as expected. If you are trying to build a whole package this is not the right script to run: please start by reading the file 'INSTALL'. Report bugs to . EOF exit $? ;; -v | --v*) echo "compile $scriptversion" exit $? ;; cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) func_cl_wrapper "$@" # Doesn't return... ;; esac ofile= cfile= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as 'compile cc -o foo foo.c'. # So we strip '-o arg' only if arg is an object. eat=1 case $2 in *.o | *.obj) ofile=$2 ;; *) set x "$@" -o "$2" shift ;; esac ;; *.c) cfile=$1 set x "$@" "$1" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -z "$ofile" || test -z "$cfile"; then # If no '-o' option was seen then we might have been invoked from a # pattern rule where we don't need one. That is ok -- this is a # normal compilation that the losing compiler can handle. If no # '.c' file was seen then we are probably linking. That is also # ok. exec "$@" fi # Name of file we expect compiler to create. cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` # Create the lock directory. # Note: use '[/\\:.-]' here to ensure that we don't use the same name # that we are using for the .o file. Also, base the name on the expected # object file name, since that is what matters with a parallel build. lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d while true; do if mkdir "$lockdir" >/dev/null 2>&1; then break fi sleep 1 done # FIXME: race condition here if user kills between mkdir and trap. trap "rmdir '$lockdir'; exit 1" 1 2 15 # Run the compile. "$@" ret=$? if test -f "$cofile"; then test "$cofile" = "$ofile" || mv "$cofile" "$ofile" elif test -f "${cofile}bj"; then test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" fi rmdir "$lockdir" exit $ret # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: gpicview-0.2.4/depcomp0000755000000000000000000005601612231706055011607 00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2013-05-30.07; # UTC # Copyright (C) 1999-2013 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by 'PROGRAMS ARGS'. object Object file output by 'PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputting dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac # Get the directory component of the given path, and save it in the # global variables '$dir'. Note that this directory component will # be either empty or ending with a '/' character. This is deliberate. set_dir_from () { case $1 in */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; *) dir=;; esac } # Get the suffix-stripped basename of the given path, and save it the # global variable '$base'. set_base_from () { base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` } # If no dependency file was actually created by the compiler invocation, # we still have to create a dummy depfile, to avoid errors with the # Makefile "include basename.Plo" scheme. make_dummy_depfile () { echo "#dummy" > "$depfile" } # Factor out some common post-processing of the generated depfile. # Requires the auxiliary global variable '$tmpdepfile' to be set. aix_post_process_depfile () { # If the compiler actually managed to produce a dependency file, # post-process it. if test -f "$tmpdepfile"; then # Each line is of the form 'foo.o: dependency.h'. # Do two passes, one to just change these to # $object: dependency.h # and one to simply output # dependency.h: # which is needed to avoid the deleted-header problem. { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" } > "$depfile" rm -f "$tmpdepfile" else make_dummy_depfile fi } # A tabulation character. tab=' ' # A newline character. nl=' ' # Character ranges might be problematic outside the C locale. # These definitions help. upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ lower=abcdefghijklmnopqrstuvwxyz digits=0123456789 alpha=${upper}${lower} if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Avoid interferences from the environment. gccflag= dashmflag= # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi cygpath_u="cygpath -u -f -" if test "$depmode" = msvcmsys; then # This is just like msvisualcpp but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvisualcpp fi if test "$depmode" = msvc7msys; then # This is just like msvc7 but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvc7 fi if test "$depmode" = xlc; then # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. gccflag=-qmakedep=gcc,-MF depmode=gcc fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. ## Unfortunately, FreeBSD c89 acceptance of flags depends upon ## the command line argument order; so add the flags where they ## appear in depend2.am. Note that the slowdown incurred here ## affects only configure: in makefiles, %FASTDEP% shortcuts this. for arg do case $arg in -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; *) set fnord "$@" "$arg" ;; esac shift # fnord shift # $arg done "$@" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. ## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. ## (see the conditional assignment to $gccflag above). ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). Also, it might not be ## supported by the other compilers which use the 'gcc' depmode. ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The second -e expression handles DOS-style file names with drive # letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the "deleted header file" problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. ## Some versions of gcc put a space before the ':'. On the theory ## that the space means something, we add a space to the output as ## well. hp depmode also adds that space, but also prefixes the VPATH ## to the object. Take care to not repeat it in the output. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like '#:fec' to the end of the # dependency line. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ | tr "$nl" ' ' >> "$depfile" echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" ;; xlc) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts '$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else tmpdepfile1=$dir$base.u tmpdepfile2=$dir$base.u tmpdepfile3=$dir$base.u "$@" -M fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done aix_post_process_depfile ;; tcc) # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 # FIXME: That version still under development at the moment of writing. # Make that this statement remains true also for stable, released # versions. # It will wrap lines (doesn't matter whether long or short) with a # trailing '\', as in: # # foo.o : \ # foo.c \ # foo.h \ # # It will put a trailing '\' even on the last line, and will use leading # spaces rather than leading tabs (at least since its commit 0394caf7 # "Emit spaces for -MD"). "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. # We have to change lines of the first kind to '$object: \'. sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" # And for each line of the second kind, we have to emit a 'dep.h:' # dummy dependency, to avoid the deleted-header problem. sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" rm -f "$tmpdepfile" ;; ## The order of this option in the case statement is important, since the ## shell code in configure will try each of these formats in the order ## listed in this file. A plain '-MD' option would be understood by many ## compilers, so we must ensure this comes after the gcc and icc options. pgcc) # Portland's C compiler understands '-MD'. # Will always output deps to 'file.d' where file is the root name of the # source file under compilation, even if file resides in a subdirectory. # The object file name does not affect the name of the '.d' file. # pgcc 10.2 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using '\' : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... set_dir_from "$object" # Use the source, not the object, to determine the base name, since # that's sadly what pgcc will do too. set_base_from "$source" tmpdepfile=$base.d # For projects that build the same source file twice into different object # files, the pgcc approach of using the *source* file root name can cause # problems in parallel builds. Use a locking strategy to avoid stomping on # the same $tmpdepfile. lockdir=$base.d-lock trap " echo '$0: caught signal, cleaning up...' >&2 rmdir '$lockdir' exit 1 " 1 2 13 15 numtries=100 i=$numtries while test $i -gt 0; do # mkdir is a portable test-and-set. if mkdir "$lockdir" 2>/dev/null; then # This process acquired the lock. "$@" -MD stat=$? # Release the lock. rmdir "$lockdir" break else # If the lock is being held by a different process, wait # until the winning process is done or we timeout. while test -d "$lockdir" && test $i -gt 0; do sleep 1 i=`expr $i - 1` done fi i=`expr $i - 1` done trap - 1 2 13 15 if test $i -le 0; then echo "$0: failed to acquire lock after $numtries attempts" >&2 echo "$0: check lockdir '$lockdir'" >&2 exit 1 fi if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp2) # The "hp" stanza above does not work with aCC (C++) and HP's ia64 # compilers, which have integrated preprocessors. The correct option # to use with these is +Maked; it writes dependencies to a file named # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d "$@" -Wc,+Maked else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d "$@" +Maked fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" # Add 'dependent.h:' lines. sed -ne '2,${ s/^ *// s/ \\*$// s/$/:/ p }' "$tmpdepfile" >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in 'foo.d' instead, so we check for that too. # Subdirectories are respected. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then # Libtool generates 2 separate objects for the 2 libraries. These # two compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir$base.o.d # libtool 1.5 tmpdepfile2=$dir.libs/$base.o.d # Likewise. tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d "$@" -MD fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done # Same post-processing that is required for AIX mode. aix_post_process_depfile ;; msvc7) if test "$libtool" = yes; then showIncludes=-Wc,-showIncludes else showIncludes=-showIncludes fi "$@" $showIncludes > "$tmpdepfile" stat=$? grep -v '^Note: including file: ' "$tmpdepfile" if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The first sed program below extracts the file names and escapes # backslashes for cygpath. The second sed program outputs the file # name when reading, but also accumulates all include files in the # hold buffer in order to output them again at the end. This only # works with sed implementations that can handle large buffers. sed < "$tmpdepfile" -n ' /^Note: including file: *\(.*\)/ { s//\1/ s/\\/\\\\/g p }' | $cygpath_u | sort -u | sed -n ' s/ /\\ /g s/\(.*\)/'"$tab"'\1 \\/p s/.\(.*\) \\/\1:/ H $ { s/.*/'"$tab"'/ G p }' >> "$depfile" echo >> "$depfile" # make sure the fragment doesn't end with a backslash rm -f "$tmpdepfile" ;; msvc7msys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for ':' # in the target name. This is to cope with DOS-style filenames: # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. "$@" $dashmflag | sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this sed invocation # correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift cleared=no eat=no for arg do case $cleared in no) set ""; shift cleared=yes ;; esac if test $eat = yes; then eat=no continue fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -arch) eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" # makedepend may prepend the VPATH from the source file name to the object. # No need to regex-escape $object, excess matching of '.' is harmless. sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process the last invocation # correctly. Breaking it into two sed invocations is a workaround. sed '1,2d' "$tmpdepfile" \ | tr ' ' "$nl" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E \ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi IFS=" " for arg do case "$arg" in -o) shift ;; $object) shift ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E 2>/dev/null | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" echo "$tab" >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; msvcmsys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: gpicview-0.2.4/configure.ac0000644000000000000000000000564412231705746012527 00000000000000dnl Process this file with autoconf to produce a configure script. AC_INIT([gpicview],[0.2.4],[],[gpicview]) # Autotols programs AM_INIT_AUTOMAKE([1.10 -Wall -Werror foreign]) AM_MAINTAINER_MODE AC_LANG([C]) LT_INIT AC_SEARCH_LIBS([strerror],[cposix]) AC_PROG_CC AM_PROG_CC_STDC AM_PROG_CC_C_O AC_HEADER_STDC # Support silent build rules. Disable by either passing --disable-silent-rules # to configure or passing V=1 to make AM_SILENT_RULES([yes]) AC_CONFIG_HEADERS([config.h]) AC_CONFIG_MACRO_DIR([m4]) AC_ARG_ENABLE(more_warnings, [AS_HELP_STRING([--enable-more-warnings],[Add more warnings @<:@default=no@:>@])], [enable_more_warnings="${enableval}"], [enable_more_warnings=no] ) if test x"$enable_more_warnings" = x"yes"; then ADDITIONAL_FLAGS="-Wall -Werror=all -Werror=format -Werror=implicit-function-declaration -Werror=implicit-int -Werror=missing-braces -Werror=parentheses -Werror=return-type -Werror=strict-aliasing -Werror=switch -Wuninitialized -Werror=unused-label -Werror=unused-value -Wextra -Wno-missing-field-initializers -Wno-unused-parameter -Werror=missing-declarations -Wredundant-decls -Wmissing-noreturn -Wpointer-arith -Wcast-align -Wwrite-strings -Werror=inline -Werror=format-nonliteral -Wformat-nonliteral -Werror=format-security -Wformat-security -Winit-self -Werror=missing-include-dirs -Werror=undef -Werror=aggregate-return -Wmissing-format-attribute -Werror=nested-externs -fno-strict-aliasing -fmessage-length=0 -Wp,-D_FORTIFY_SOURCE=2 -DG_DISABLE_DEPRECATED -DG_DISABLE_SINGLE_INCLUDES -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_SINGLE_INCLUDES -DGTK_DISABLE_DEPRECATED -DGTK_DISABLE_SINGLE_INCLUDES" fi AC_SUBST(ADDITIONAL_FLAGS) AM_GLIB_GNU_GETTEXT IT_PROG_INTLTOOL([0.40.0]) AC_ARG_ENABLE(gtk3, AS_HELP_STRING([--enable-gtk3],[enable to use gtk-3.0 instead of gtk-2.0]), [case "${enableval}" in yes) enable_gtk3=yes ;; no) enable_gtk3=no ;; *) AC_MSG_ERROR([bad value "${enableval}" for --enable-gtk3, use "yes" (default) or "no".]) ;; esac],[]) if test "x$enable_gtk3" = "xyes" ; then CFLAGS="$CFLAGS -DENABLE_GTK3" gtk_modules="gtk+-3.0 >= 3.0.0" else gtk_modules="gtk+-2.0 >= 2.12.0" fi PKG_CHECK_MODULES(GTK, [$gtk_modules]) AC_SUBST(GTK_CFLAGS) AC_SUBST(GTK_LIBS) pkg_modules="x11" PKG_CHECK_MODULES(X11, [$pkg_modules]) AC_CHECK_LIB(jpeg, jpeg_start_decompress, [], [AC_MSG_ERROR([libjpeg not found])], -lm) AC_CHECK_HEADER(jpeglib.h, , [AC_MSG_ERROR([libjpeg not found])]) LIBJPEG='-ljpeg' AC_SUBST(X11_CFLAGS) AC_SUBST(X11_LIBS) GETTEXT_PACKAGE=gpicview AC_SUBST(GETTEXT_PACKAGE) AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE,"$GETTEXT_PACKAGE", [Gettext package.]) AC_CONFIG_FILES([ Makefile src/Makefile data/Makefile po/Makefile.in ]) AC_OUTPUT echo echo GPicView....................... : Version $VERSION echo echo Prefix..........................: $prefix echo echo The binary will be installed in $prefix/bin echo echo http://lxde.org/ echo gpicview-0.2.4/data/0000755000000000000000000000000012231706136011213 500000000000000gpicview-0.2.4/data/pref-dlg.ui0000644000000000000000000001463412231705732013203 0000000000000010PreferencesFalsenormalFalseTrue6Ask before saving imagesTrueTrueFalseTrueFalse1Ask before deleting imagesTrueTrueFalseTrueFalse2Automatically save rotated imagesTrueTrueFalseTrueFalse3Rotate JPEG file by changing EXIF orientation value (only if EXIF orientation tag exists)TrueTrueFalseTrueFalse4TrueTrueSlideshow interval0TrueTrue•adjustment111Truesec25Make GPicView the default viewer for imagesTrueTrueTrueFalse6True0noneTrue12True12TrueNormal:False0TrueTrueTrueFalse1TrueFullscreen:False2TrueTrueTrueFalse3True<b>Background colors</b>TrueFalse7Trueendgtk-closeTrueTrueTrueTrueFalseFalse0Falseend0close110001 gpicview-0.2.4/data/Makefile.am0000644000000000000000000000066012231705732013172 00000000000000PIXMAPS_FILES = \ pixmaps/object-rotate-right.png \ pixmaps/object-rotate-left.png \ pixmaps/object-flip-horizontal.png \ pixmaps/object-flip-vertical.png gpicview_DATA = gpicviewdir = $(datadir)/gpicview pixmaps_DATA = $(PIXMAPS_FILES) pixmapsdir = $(gpicviewdir)/pixmaps ui_in_files = \ pref-dlg.ui ui_DATA = $(ui_in_files) uidir=$(datadir)/gpicview/ui EXTRA_DIST = \ $(gpicview_DATA) \ $(pixmaps_DATA) \ $(ui_DATA) gpicview-0.2.4/data/Makefile.in0000644000000000000000000004151212231706055013203 00000000000000# Makefile.in generated by automake 1.14 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = data DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(gpicviewdir)" "$(DESTDIR)$(pixmapsdir)" \ "$(DESTDIR)$(uidir)" DATA = $(gpicview_DATA) $(pixmaps_DATA) $(ui_DATA) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ADDITIONAL_FLAGS = @ADDITIONAL_FLAGS@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ X11_CFLAGS = @X11_CFLAGS@ X11_LIBS = @X11_LIBS@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ intltool__v_merge_options_ = @intltool__v_merge_options_@ intltool__v_merge_options_0 = @intltool__v_merge_options_0@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ PIXMAPS_FILES = \ pixmaps/object-rotate-right.png \ pixmaps/object-rotate-left.png \ pixmaps/object-flip-horizontal.png \ pixmaps/object-flip-vertical.png gpicview_DATA = gpicviewdir = $(datadir)/gpicview pixmaps_DATA = $(PIXMAPS_FILES) pixmapsdir = $(gpicviewdir)/pixmaps ui_in_files = \ pref-dlg.ui ui_DATA = $(ui_in_files) uidir = $(datadir)/gpicview/ui EXTRA_DIST = \ $(gpicview_DATA) \ $(pixmaps_DATA) \ $(ui_DATA) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-gpicviewDATA: $(gpicview_DATA) @$(NORMAL_INSTALL) @list='$(gpicview_DATA)'; test -n "$(gpicviewdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(gpicviewdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(gpicviewdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(gpicviewdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(gpicviewdir)" || exit $$?; \ done uninstall-gpicviewDATA: @$(NORMAL_UNINSTALL) @list='$(gpicview_DATA)'; test -n "$(gpicviewdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(gpicviewdir)'; $(am__uninstall_files_from_dir) install-pixmapsDATA: $(pixmaps_DATA) @$(NORMAL_INSTALL) @list='$(pixmaps_DATA)'; test -n "$(pixmapsdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(pixmapsdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(pixmapsdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pixmapsdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(pixmapsdir)" || exit $$?; \ done uninstall-pixmapsDATA: @$(NORMAL_UNINSTALL) @list='$(pixmaps_DATA)'; test -n "$(pixmapsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(pixmapsdir)'; $(am__uninstall_files_from_dir) install-uiDATA: $(ui_DATA) @$(NORMAL_INSTALL) @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(uidir)'"; \ $(MKDIR_P) "$(DESTDIR)$(uidir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \ done uninstall-uiDATA: @$(NORMAL_UNINSTALL) @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(uidir)'; $(am__uninstall_files_from_dir) tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(gpicviewdir)" "$(DESTDIR)$(pixmapsdir)" "$(DESTDIR)$(uidir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-gpicviewDATA install-pixmapsDATA \ install-uiDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-gpicviewDATA uninstall-pixmapsDATA \ uninstall-uiDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ cscopelist-am ctags-am distclean distclean-generic \ distclean-libtool distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am \ install-gpicviewDATA install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-pixmapsDATA install-ps install-ps-am install-strip \ install-uiDATA installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am uninstall-gpicviewDATA \ uninstall-pixmapsDATA uninstall-uiDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: gpicview-0.2.4/data/pixmaps/0000755000000000000000000000000012231706136012674 500000000000000gpicview-0.2.4/data/pixmaps/object-rotate-left.png0000644000000000000000000000551612231705732017024 00000000000000‰PNG  IHDR00Wù‡bKGDùC» pHYs Ö Öoyœ ÀIDAThÞí™kl\ÇuÇ3s÷îrwIŠEJÔË’õ°lG–CÇNÓº­ãÈnë1Ô‡ShS«ÐÀA‹~H $Ú Ic mÜM ¿§uR8qÓO â A;®["%˪%š–%Zâ›Ë]îã¾fN?Ü%%U¢DŠ6óŇ8˜åÞ;3ç?ÿsÎœ™…wå]Y–¨eõ¾áãPÈAbW¥f8øðŠÐËë­PA´N)õÏ(uÏŠYý¶Ø}?Q÷Úõkþn×ÎÍZ¼%÷¸áã ԃΎMk¿tç]¸/ "Ž;©0Ë#ôjdé3j°½µwÍ~íÎ÷ÿáÖÝ»´Ó 7~évÿ1a±¥»ó¯oÿàmû¯{ßn¢Yn.X©ÏçýÕ«>ûËw¼ï{~å–L¨ ¢5Jÿâ,.vß kVµ}ê¶Ûûþì¶þ’iqºÉ@b;™.÷`ŒÇÖûšˆ€ ‘Ø€r9¤2–@ÅA\6€+/Ýîû! }U,üÅ­·÷ýÕÞÜ‘O2>±¬€ï&‡øñ3/ŒcJé˜2JœsQQÖ­uõ8NJµjí¨ ¢Âè5D†Ñ:äø¿¿nÚAàQÈ?°çý7}îž}{[ɵKj¼…‡£VI¬Ã9Á:‹µk.±H’ qŒ‹lИ)ËÌd)œx¾>3û$qü3ÕYº;àÈ¿.€YðÉžýÐhòù×÷ÝøùïÛÛæ XÑÑ §E„™ Îó°Æ`µG¢ ‰Ò$J)C¨ ¡òˆ=ÓÚªÚ»»3›¶lhß¼±ç=¹–ìGkQ|kdÔ[áizû`|`öì‡0ÔärtíM×ýí½¿{wG~U J§”j~VA!4YÁ!ië'q‚sŽÄ:ÂØ2D”1‘ñY×Ûão^¿f{=÷Vêa€È+ôÞ’0zè*Üü'P«A.÷û›vmÿò¾ûî^³ª«ƒX@”Â5W>eA§ ”Ju¸¦¦ H8iÄ¥îD ÓÕ1>;¶¬o³IrÇÔt9 N^dý-r%æ"ãËÓPhÝ·vû5ýöÇ~cmϺ5ÄN@iÐÿßð9šªÎ7~nõÏíš,¸f¬ˆuˆMÛZQ -Û¶¬Ë4jõ¾r¹2”ñýcní{aäà‚¼óW&‹ÚïéÚ²ñ+÷þÎ]ë6nè¡a…X a³*Ö ›êP(@9‡‡/BFOJ)PM`inBH¿£ùYHŸ¡ Æœ.Ã7ßÐ93SùLelâçøþ©Ë1è;€2‰Â½«6¯ÿêoÝ{ç¦îÞn^›ªq¶n™J„Y§•&Ññ<”çgÒMLÒU$±(› ‹/–‚ŠJÈ+R˜ó†_h¼4Ý3µb¶ÈµÛ®¹±º¼Ïd³_±},ÑçF]ãùݸeã×Öη1k!1åy¨Œ‡Îh”Q(ÝT£Á˜9gG´ÃY…ˆbÇl’ ’„œ8Ú Í%‚N˜/£DÒ¼>Z®³eýZÓÖùæïUÎŽý-¹É…8WJøY‡sÿ8øÊñg‡ŽRÈ'©{(RwXHÔÅÿ*•¶"P‹g«§f¦1‰Ò?.ÔæþD–@ytuuìD©­\fîtAFÂÚ›Ad*©Õ_.MN÷mî]½!ÛÙA5”Ñ(­›­i2 A¥þŸ¦I[ë.lçÕ’$–jEO¥qã¬mªCœOÚh Êú##/¡õ!Öõ]2˜Ï1ÐÿhZ×s´6>ù@ÿ~v¸}f‚ž|&­yæÒK3§Ïù¼ÄI,bmÓè4ëÈüûrni%ý~6Œ«Ô£äÜcI™s§Z˜Ð’/ãy×½pÍyá“þGÁhð¼—gGÆèÿásÇWW§éjñçRã­kÁ6 O$±)›®ôܪ‹¸È R Qb™ª…ÔÂxþô•´µ6eAk•ïÝгH‡I×xÏÏ ŸùäÀ3?=¹¶Q¦Ã÷pM· Œ?§Ø$Ííón#ç€8wÖ:ʈF”\À:¥0F熟ý¹Z<€ywz7ýpêÓ~ä?9³!ž¥ÍÓ¸ùÕN.aí¼º$õigçX™s-7Ïäg³ˆ0¶óg:!MGÍݺÚúž ÷.æFAÛv¨Vתõ³råWwlÛX¨ë aâš3 ¾‚C Fèð ÃS=…¯J—8l$MPr^ KbIb‹nŒœ@ÆhZ%âÌ©3OGQò¢ˆ\2ˆ/ é4-ì¢è©³¯ 彌÷å]wßÑñºÎЈÐ ßxÈ©79òì‹cžï׌grž1~.›ÉÚÛZÚÛÛ¼L!OPÌ1^*Q|^ŒÈ|‚°Îш ›1ˆ€§5IFqb‡•ÖWÞÈ”Ç`Ï~Gqò)Zr?&ëOqôëãL&wía©Ö~NÎ|wzªôýñ‘ñ dWﺮ–R#ÁÆœEšfêÿ€‚ž¼Gùì™—KƒÃÿBk>bäÒUéâõïÇáCƒþý™ÿ~)ÜÖ¢ðšûÂ%åÍïÀ©§aøé­gÇÿòhÿ±O—+[ýf¶”¤G)…ˆ`”ÂCJ¥Ù>ûÅ?­^n'^ÚµÊáÇ ãRo|éµ—ÿÓÄÁþx[AcÔ"î„Ž}:Ú™šybèÄÉïäƒ*-ž¾¼m9 <35]ª|ï‹_ûÏË»ô‹­Ãƒï×\­þ¹cÿ3ðøÄÀ+6+nq}®Ž¨^®~·2>Q_•óš)³Y¥Š ”¢Ó‡é‰©xk|À9wÙËâ«» <üd2e[­}fàg‡¾y襣 õ•i˜3$Ž‡*•j¥¹xúbÖ#SŸ FF§þcÍžu=ò63p>ÏL…ÕꧦG'¾Ì.ªŸJO/‰uœ_ãHó@ГS”ÆÆZ;3ñ½‰©Ê‡[úåîùb (5ŠÈ'»è~Ze•VFäBÒÚ[ñúCƒ¯ }Úo+”lÿ£W5æÊÆ€ïïÊù^ßø©·F‡†œ<~úaÚ õèå«ÿ]yqåôÛ!½} ÕoFQ²v|lê“•ç?E{1bè[Ëvå~Üê;°G1?ÆT^ýúŠMÿ®¼Sò/o?4åúɧ"zTXtSoftwarexÚ+//×ËÌË.NN,HÕË/J6ØXSÊ\IEND®B`‚gpicview-0.2.4/data/pixmaps/object-rotate-right.png0000644000000000000000000000551312231705732017204 00000000000000‰PNG  IHDR00Wù‡bKGDùC» pHYs Ö Öoyœ ½IDAThÞí™kŒÇYÇsyßsÙ=»>{õ®kwmlã:ñÚñ–´M«’R( „@|i¢uŠ0 A€‚*¤Jä[QH›V*%@è‘” pc(Ic{õ6NíØë]ïíìž={9»çò^f†ïÙÞø’Ø$‘òH£9ç}çÌüÿÏóŸyfæÀ;öŽ½!w´÷Á9€<Ž)*œyü¶!ï(@HB|FHñ§ÔƒwÿÆÛ‹@WÛ6|O·ºkÏñ¶®¶?f¹š½$î8LÚGáÞ÷Ãòƒx(³£ó¨ÖÓúäÛƒÀª9¥é¿o }߇Ž>âwæf¹êßÿ„JóÞ¼?{ï}GþHul;N¹¢éÿÔ[›€µ.Yê¤À Iì§øàÇ>Ô<ðþþωöÖ©Õ‡½îþõëûÙ~ ò’|G®9…’i„ð“÷.©æ—ÜÕ¹çwµç”Ä ™,ùùû[ƒ0úüЋÃ¥Å¯Ðÿ)ǹ¯Ü!û?Î"‹”}¤üƒ*“º§©)ûãžV­J«ŒŸNe=ßK )‰bh¤'ÝÙÖN&7üæf~ö—>ÚFæ±WÏ×™_|’ÃÇCOÜë'²CŸ„Œ†r½ƒ”ÿ3¹¶–÷lïèìîhoíÈûé–2•Bzáy­QJ!µDI‰RIÑJ‘ͦˆ\¢Y%@)%©”æùÖ?>3}ùÜŇ(—Ÿb[+¼tó$ÔuÁDZùËùžŽ¿è?rà·î¹÷ðÁÞý{s~g—2Í-^ŠØó1^ «=œççƒç#üõ‚ça„@ ‰T)$BŽ¦æ&víÜž›,ÌÝW.W.{ñ‰‹gÿu gß@góÒ÷Þ³w×o:r0¦²,††ö=´§Ñ¾NjO£µFy­Z+”Vh-QJ¡¤@K‰’bÍû‡Â¡œ#¥…«SüÓ“O_)¼:ö2™g‰‚›ŠÄµ¸çˆM“Êdë?òžß=pø`vªf)UCœH­’¢Ök¡6>“Éw¥J&ÏŸ…”)B EsŽ¶| ÝÛ;ò£“³ï«KÃ9FïoÀÑOCI|ÿ¡wíû½=ø—J‚È Vk•È@«5 «dÖ¾ëD*jí½Dʆ|¤@É’9!H–Û®öm´u¶µ_¹Z¸7X*ŸEŠ zß Óƒ7I g¬½wû®~÷@~d¾JlÌ:ÈU®‘Þ)TÃÓ1’š” ”b(Æ0ÁLè(ŽùвZV"ƒ±.™Ø8z»òäò­#ã…¨¼rÄôõ"±N`àA¨V•lnþÃÃwÿÔ>åZ€”¢á½ 6ÈC)‰Ð’È #G¡n˜¨¦Ëlè(Å°h‹–¬`>rë1SÕ˜‰•ÑrÀX9`²°P‹‰cC_o;Ù–æíc“³GâjõE”š¡w¦Ï\C`=8Jïïêîø…l>Ïä\!8p8¬·ÞA-¶”ƒ²…@HС5ÂS!ÍKÐ ¤DX‹s¤Å A`¡JQÌhó’5´y‚£;wÐÕÛ=067ÿQàÜkIh€ TWwGïbh‰­ÃSIFrœs:md •¥ØIžN&ðj_[.y·Õs!‰¯0Ö‘óC?8ç&Gƾs_¿Þ$–«òéÞ±•I ´ä[õR5\ ŠÛbÄjh˜.×™] bc;׈•[/ÎXœ‰ÁØMÏÁ­9 ¯5M42¿êÛñbùE¬åµNrk˜93¬³{v¾ÛK¥¨¯˜†tòqI±ÎQ®G”#‹Q áy›uÕh'œÛ(Æâ„EΊ52X»Þ¦ñÛ]91:ÂÐ÷^x6\Xú,ZM1týýѺ„R¾ÖZeœkkŽ´ÖQ©…T 8¥Rmöp£« ¬ÅY V ŒÁ%{©¤_k“ˆX»Öî]ÍþäUNÿÇ÷ÿ«^šÿ´E)nd'±ô<í[À8‡Zõ>I¢Y©GT-ÐXï7·áV½ú€¯JJnع7` ÖXz2M³“œ~öä©êLñ8Z]DüÒ-¨‡‘‰Í ήúimòÖ‚˜ªq x' ÀÂZpgå:0abãa#ñúêG\"k ]iE~a†SßýÞðòÔÌq´>‡VÜìíÅ_|àW¢ÏžÅ$ƒ;›x?Œ-µ(Æ ‰pg7KeU)iO‘Mi2¾ÂS%@ ‹RŽHûŒ,GØFÔœµ´§Ë%Î:Wœ?]«T_±At ÁÙ ŽkÃTû¶Gƒòò®µ ÅäRš]q…sß=1]¼<ö0ÃÿðoÜó‰[:\CÀ ÕúùÚòÊD6ßµ¯hìµ9 áùŒòØ›¶Lœ¸riì¯â¥•oP­^ÅW‘…ñNÚ<Èî¾íLO•ÊÎY\“•°›:/ÿûsÅé‹W~Ÿ°þ-Ž|ü–= &ŠS {—ûÞmö±êõFV ÝJ'ékÖL¿û\-¨Ë´–ýó‹Ëù¨¹ùÛ(U~kh˜›„¶Cµå«3ÏÍ…á… ˆŽ:)†bäÍ"ðúþ©?| ŒßÛ‰`þvÿÿŽ½]ì¼@†» nQ"zTXtSoftwarexÚ+//×ËÌË.NN,HÕË/J6ØXSÊ\IEND®B`‚gpicview-0.2.4/data/pixmaps/object-flip-horizontal.png0000644000000000000000000000410512231705732017710 00000000000000‰PNG  IHDR00Wù‡sRGB®ÎébKGDÿÿÿ ½§“ pHYs  ÒÝ~ütIMEÙ Œf“ÅIDAThÞíY[lœGþÎÌÝ×ñzí\ ^( ´Bj©úÀE”›ä-B­P…€¶R1¨A •4H¨P»ñÒ"ÅBP EHH‰Æ$Á” ò€‚Ò‚Ý8‰ãÄÞ]ïå¿Ïáa½þµ×^»j‰>ÒÊòèÌüß™ó3sÎÛ²-Ûò?-ÔKáÝ_8idqîÙnzñ‘Ñq€Aà™SÇ65·Xš3cfjýyâMÞ ADô¦~ —‚f vñå×µø[?z4 –.+(µé¹…ÛîCPíÉ ®»sÇ×Î% ûûÓ·'ã÷=ðY\6î¢ù²Ç•Zaƒ04,Sg]—BdAh(¥x:E›ýŸx* F ”RA³ç‡*ˆ"ft]bGÖÆž¡~ÜþÎaL~ã“xîý5ãÅû©+ý»z@Ïî\þ uŒ_jö“Ä RhR pü0ìAR”‹8²|ö ·¯Z”áú†ë‡–R.ŠìAR…㇡I)Z0¼ Ä+¯Í¯š:ÿ·‹kÆî¦ø9üᣆüå‡MžL€j‡ÆÑäIhžID@ÚÅÒ„ M/Jë%s=‹ܲ¾¼#£˜™:º–¤ŒŽ£gÌ­E¦O­š€½ïÿ ®UC€–°ë›"^ß”– ŒqåôñŽ1?ˆ ÌTl¥ ‰,ý2¨V÷@DØ5Ø—è­¯çv!j.‚ãÚY"¿n0;Ī.~îÇk‚€¦ëwëÉí5Ì<8#DqÜ#©äAÒ¸‘…"¯{çADëàȇ0œÎ|<:ŽbiBêØUt°wv]ðÇ ÅÒÄʱ5w¨½ÖÞýYîËÚDD(–&P,M`øž#ºîüy¨ ÑŠ*ÚìÙÀKü~—Ãd³seìûÎW[ëÐ&-a‹k‹5%ïx 4ËУ0ŽèXψhò$ì©¥—*µ&„áÝùnê €¤ÙÇZ¯ƒš™á½zÚÙ© €Áak™iÀzÏy)#x±Â¦”ÖQg«ð¶V4ïûÐc¸ô‡ïuì|;Зê.ìmü!í å.0å+I2Váí8ÿü‰ÞÎ;ZF‹¥ \¼²€iG.ÃÿmðÝŒ¨Ö\H)°gh&Ÿú>þžîW‰f’‰qÌ7 |ú›v8V*É’ÇŸþ>vø'«²biBà ³yÓÀwó„¿r2fûòCÌà™©c7u4€}÷žÀõÅŠÚ xÊX2–‰v¡ÿ«ï~ºëœ :{Ãfÿ[ gw€š™:Æ3SǸ9ÿO2¥Ò,C¡é¹éf®—'¤”æêô‹_‡‚6@›\£ÙŠOÇ6°ggç‹¥ ì¾û²Ãw&EMbÀùŸã¿|¤cáÊ…ÓìW/‚ãVa¤I ÓÐê~¹å¹µŒÈØ&od¬ã¶Y&2tYoÓ&—µð—çíÚ\0ó#7þOq¿m%µkΠ:KWÿñ;Þqàa¨ü§}iŠác(4½kmiJºÄÈèxGcÖÐ%Eˆº»î[¤Ù Ç6,/ýôp:±$0¥ÙÇÙá÷"öª¨\8Ó¢Pºƒ0}ê(§ gå-ü+¾ú×)”ul8™Vs§Þð®×çcÒQÒßY%…è_Ù´”BðJ=íÐÕçcª7[ý ¾\¸ë`×¾Ôr뇅4`ö£ráL§Ö*œ[µçÃË—…Bµ®ßŒ8VXxâèº&mSWº.…B€ V5  ì‚b.A×óá·Ÿi¦JD0 ?{âþž¤Y76¦Åõ3ëõø¡;ƒ "øAÈ~*ÂÜÙo!˜ýFÞ÷yä ÃŒØEX¿Æ‘_SÒ`(…Ê…ÓÉ:fál Ýâúå×`÷ï×fÜŒ¥ÃÉöÁéË ,-\ÆO=‹¹?ÿ°ƒ ˆÜ n-¡úêï{UÍ„·øïÞ½Ñw=ò¸×_ÇÁš®]ç‘B ¬6ûÀqËgžÀð«³XkîÈèxï÷a8QÏÖã¢ðëyáxò…qä…‡zîpϵGFŸ„ž@äVpÛØãxyb W_š|#¯>”úqê·áÉÝ\Ÿ4|×z£jël–V=ŒØøu³3¯õ€³¡nö&…WüÝ–mÙ–ÿùˆø͹MyIEND®B`‚gpicview-0.2.4/data/pixmaps/object-flip-vertical.png0000644000000000000000000000413312231705732017331 00000000000000‰PNG  IHDR00Wù‡sRGB®ÎébKGDÿÿÿ ½§“ pHYs  ÒÝ~ütIMEÙ +Ù[7ÛIDAThÞ½Yil\Wþνo™5ã±;nìؤD¤©!J±¤„ŠTT©¨T²EÊ"„Di–ŸÄn‘úƒµ#U”R„R‰üHUJÅŸF"*âGDhUHd7%Îâeœ™7ó–ûîáÇ,=ölΑFofÞ{÷ï|ß=çÞó›o²tdºÞEƒŸ?#’3cöü±†7šñddt03}´™ÛÂz'¶öG0cÝ€hßC(Ü~DÔTt¨Õ°23vãOð2×WúÔ·~+\/ÐóKYd Áš¤H§âÆÌôQµ Ìg~#Þ "j*@F«^ •¿Š¡|ÁÓJk€BºO— €M@¡82BEÜŠ„ צj‰TGzç#¿€ö¦%Jíj}øÐ%â1Á¬ÙÉ»zqÙR!â1Û²ÓðÀ‡š: ð½-ÎÝ@Hcfzí {à§7änãŸ/||Ýç‹zún8kfÖ! 5¼@ÕÎW-;ÏaȘژ‚ë(ÒÏë9/¬Ô èûÄ7%‘“÷¸àú âQÛ‰ÕNW$Tú½ýÁ§’1.³=2:ѲÂi}yœBrÇhßsóJ%?GzvÊþ=_$;5/*“- âQ;m¥yq-ç«­,§ÂÓr6"Â`3käÿ½ßû;Tapå÷£ 2P23Ö gî2 óÿôí; H=ø9¶SCŠ¤¥@©ž¯d#ÎWŸö÷>ù(¶ŸüP'ÿß¹i% ­Dó ŒŒN‚™+Å…TJ>|ï?FÞõãVçq~-&Œ±q¢_½ PÎn¼õóΤѯœeœ{„ÊÙÉDL¤sNKËT"µZr¾º5ã@ `kÊÄ@t™¶Ç2|öÌ«-Lâ’½=¹Ò!AÐÌ!F \/H´ã|Í}jH@Zqø±|ÃÚO­e¡’ݺ4uï‡V¸›+ÀÉ{€XÔ–ÛFbÙvœ¯ñÀÎ÷Ÿx $$–·—\n Àð¡‰J1+Ûì?Ár¶€œã@¯fÕ çkA„x‰ù»‡‘u\d²y´Å@­B B¶{§“ÎׂPS§Y©A¶`öü±Uˈ]½è:~›á|-ˆ®ãGÐÈʺa¤‡iBMfÜSS§Ù2 ê/sQÛÔ›ýZ"¶Éà߃iJûh¦);·¡a!…jeñ©—Ó[)d«e+D@®#ì®!@ûÚö£éP댄È< µf¥ÂHÏ`¤Ðj¤ç?p¥)¥–R µa™R€Ð¹9ÀʇÖZkÖ˜»ð,–/žäÞt†!ݶ4/¥îíNbùâIÌ]xD€f ­5·-¡‘ÑI@ÌL?£Ö:?3}æÃOKÀl€ë+Òvõ.íÓ/0Þ¿0iгçéVX·Ÿ³Që¤ÝæÂÕ¿~D¤«öàÍ`fp]#_þlËhËûˆeªº™(ÑkÐÚ6|r™ÎmŸ<‚XÏ°C‡Z“„œ/x4¿˜a†¢ ©0Dâà1H)(µ…mD!zíÜ3ÉBÉûænwyVaDH$e©sh¶Å@ï`¤*º Š„Ø~ÔîXÈßü7ÌxÏR§+q½±ÔÔih­uÇÒh¤ûCð}u? 1ü ìÜR"ë ^Þ¨zvh!WL¯^Ð9¤D Ô¢16N÷#úÆØ8ùJµÍ@ÅYI2§^Äf²P7sêE4Òç8_`D’0M¦)azÚ •6‹!à ­FÅÎÓ½=½T2†D,f†·DQÇ[*öž1©D´e\õ)î‡swЛN!YÔÉ»¸9“OvDùþ×r”͹ "¤Sq líjKB+l}øqüã•#Ø»{¸H³!a[FÎÏ´ÇDUŸTH)Š]@f¤Sq|ì#ƒíuæ6j9VR¬ë“ÕÅMo7«›¼[Ñc6ú¢oCg˜qüñWðÞŸŸXñÿÿF6çÂ)ø˜_¼ ×WØ6Rl™7¢ìüÿ®æl!Éß1Ð³æ •}O¿ƒ…­,Ý›®w+jZi—^þ¶$£B Ø–¿Á‰]y)É_oãuã­_×Ãur*m,— 0€Ù:¯‚ªåDDpò¬4×e¢Úùdˆî=_]S£þø/x÷ê dî,fáÕ‘SE6×r$…ÀÐ@wÝ÷pûO¼¾}CxýkÔ™¥„™è¯{îµçÃÈàÖâ€BÀ2WË©’çA¦!!7èм}rdžÎ7ÅÀž'ÏÁ™»\–Jå5kukå}¯ÃlzªÖr´wÞýã×Ûª! 30ù „aAH ÌÌÊ]†»pmÕçŽ>$âÅjíä=cãdŒÆØ8eDÀ¶­)L=÷íUÎGûvÃLöwf3]kÖ–Dz> V. ×P¸ó¼¥ÙU×Ü÷QL¿yÉ­u°xò76kö‰†!€¶$ãøÒÞîÚ´B^æ:8ôk‹ig$Ôµë ÈüçÍUß×Ë^åÇséA\¿HQÍ‘›±® šÀð¡‰uƒ`¥)ýÐhÓc÷í{ñöBÚ[¨$çêϪåZö„HŽpÚïÒèIEND®B`‚gpicview-0.2.4/missing0000755000000000000000000001533112231706055011624 00000000000000#! /bin/sh # Common wrapper for a few potentially missing GNU programs. scriptversion=2012-06-26.16; # UTC # Copyright (C) 1996-2013 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try '$0 --help' for more information" exit 1 fi case $1 in --is-lightweight) # Used by our autoconf macros to check whether the available missing # script is modern enough. exit 0 ;; --run) # Back-compat with the calling convention used by older automake. shift ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit Supported PROGRAM values: aclocal autoconf autoheader autom4te automake makeinfo bison yacc flex lex help2man Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and 'g' are ignored when checking the name. Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: unknown '$1' option" echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac # Run the given program, remember its exit status. "$@"; st=$? # If it succeeded, we are done. test $st -eq 0 && exit 0 # Also exit now if we it failed (or wasn't found), and '--version' was # passed; such an option is passed most likely to detect whether the # program is present and works. case $2 in --version|--help) exit $st;; esac # Exit code 63 means version mismatch. This often happens when the user # tries to use an ancient version of a tool on a file that requires a # minimum version. if test $st -eq 63; then msg="probably too old" elif test $st -eq 127; then # Program was missing. msg="missing on your system" else # Program was found and executed, but failed. Give up. exit $st fi perl_URL=http://www.perl.org/ flex_URL=http://flex.sourceforge.net/ gnu_software_URL=http://www.gnu.org/software program_details () { case $1 in aclocal|automake) echo "The '$1' program is part of the GNU Automake package:" echo "<$gnu_software_URL/automake>" echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/autoconf>" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; autoconf|autom4te|autoheader) echo "The '$1' program is part of the GNU Autoconf package:" echo "<$gnu_software_URL/autoconf/>" echo "It also requires GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; esac } give_advice () { # Normalize program name to check for. normalized_program=`echo "$1" | sed ' s/^gnu-//; t s/^gnu//; t s/^g//; t'` printf '%s\n' "'$1' is $msg." configure_deps="'configure.ac' or m4 files included by 'configure.ac'" case $normalized_program in autoconf*) echo "You should only need it if you modified 'configure.ac'," echo "or m4 files included by it." program_details 'autoconf' ;; autoheader*) echo "You should only need it if you modified 'acconfig.h' or" echo "$configure_deps." program_details 'autoheader' ;; automake*) echo "You should only need it if you modified 'Makefile.am' or" echo "$configure_deps." program_details 'automake' ;; aclocal*) echo "You should only need it if you modified 'acinclude.m4' or" echo "$configure_deps." program_details 'aclocal' ;; autom4te*) echo "You might have modified some maintainer files that require" echo "the 'automa4te' program to be rebuilt." program_details 'autom4te' ;; bison*|yacc*) echo "You should only need it if you modified a '.y' file." echo "You may want to install the GNU Bison package:" echo "<$gnu_software_URL/bison/>" ;; lex*|flex*) echo "You should only need it if you modified a '.l' file." echo "You may want to install the Fast Lexical Analyzer package:" echo "<$flex_URL>" ;; help2man*) echo "You should only need it if you modified a dependency" \ "of a man page." echo "You may want to install the GNU Help2man package:" echo "<$gnu_software_URL/help2man/>" ;; makeinfo*) echo "You should only need it if you modified a '.texi' file, or" echo "any other file indirectly affecting the aspect of the manual." echo "You might want to install the Texinfo package:" echo "<$gnu_software_URL/texinfo/>" echo "The spurious makeinfo call might also be the consequence of" echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" echo "want to install GNU make:" echo "<$gnu_software_URL/make/>" ;; *) echo "You might have modified some files without having the proper" echo "tools for further handling them. Check the 'README' file, it" echo "often tells you about the needed prerequisites for installing" echo "this package. You may also peek at any GNU archive site, in" echo "case some other package contains this missing '$1' program." ;; esac } give_advice "$1" | sed -e '1s/^/WARNING: /' \ -e '2,$s/^/ /' >&2 # Propagate the correct exit status (expected to be 127 for a program # not found, 63 for a program that failed due to version mismatch). exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: gpicview-0.2.4/AUTHORS0000644000000000000000000000123612231705732011275 00000000000000PCMan (Hong Jen Yee) (lead developer) Martin Siggel (jpeg rotation) Hialan Liu Marty Jack (many bug fixes) Louis Casillas (added functionality, fixed bugs, revamped) Martin Bagge working-area.c uses code from gaim-guification plugin by Gary Kramlich. jpeg-trans.c and trans-supp.c use code from GThumb project by Thomas G. Lane. The icons of "Rotate clockwise & counterclockwise" was taken from nuoveXT 2 icon theme by Alexandre Moore, which is released under LGPL. Slideshow code based on a patch from Puppy Linux by Will Davies. gpicview-0.2.4/Makefile.am0000644000000000000000000000163512231705732012264 00000000000000## Process this file with automake to produce Makefile.in ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS} SUBDIRS = src po data EXTRA_DIST = \ autogen.sh \ gpicview.desktop.in \ gpicview.png desktopdir = $(datadir)/applications desktop_in_files = gpicview.desktop.in desktop_DATA = $(desktop_in_files:.desktop.in=.desktop) @INTLTOOL_DESKTOP_RULE@ icondir = $(datadir)/icons/hicolor/48x48/apps icon_DATA = gpicview.png install-data-local: @$(NORMAL_INSTALL) if test -d $(srcdir)/pixmaps; then \ $(mkinstalldirs) $(DESTDIR)$(pkgdatadir)/pixmaps; \ for pixmap in $(srcdir)/pixmaps/*; do \ if test -f $$pixmap; then \ $(INSTALL_DATA) $$pixmap $(DESTDIR)$(pkgdatadir)/pixmaps; \ fi \ done \ fi dist-hook: if test -d pixmaps; then \ mkdir $(distdir)/pixmaps; \ for pixmap in pixmaps/*; do \ if test -f $$pixmap; then \ cp -p $$pixmap $(distdir)/pixmaps; \ fi \ done \ fi gpicview-0.2.4/autogen.sh0000755000000000000000000000152612231705732012230 00000000000000#! /bin/sh AC_VERSION= AUTOMAKE=${AUTOMAKE:-automake} AM_INSTALLED_VERSION=$($AUTOMAKE --version | sed -e '2,$ d' -e 's/.* \([0-9]*\.[0-9]*\).*/\1/') # FIXME: we need a better way for version check later. case "$AM_INSTALLED_VERSION" in 1.1[1-9]) ;; *) echo echo "You must have automake >= 1.11 installed." echo "Install the appropriate package for your distribution," echo "or get the source tarball at http://ftp.gnu.org/gnu/automake/" exit 1 ;; esac if [ "x${ACLOCAL_DIR}" != "x" ]; then ACLOCAL_ARG=-I ${ACLOCAL_DIR} fi set -x ${ACLOCAL:-aclocal$AM_VERSION} ${ACLOCAL_ARG} ${AUTOHEADER:-autoheader$AC_VERSION} --force AUTOMAKE=$AUTOMAKE libtoolize -c --automake --force AUTOMAKE=$AUTOMAKE intltoolize -c --automake --force $AUTOMAKE --add-missing --copy --include-deps ${AUTOCONF:-autoconf$AC_VERSION} rm -rf autom4te.cache gpicview-0.2.4/config.guess0000755000000000000000000013036112231706055012546 00000000000000#! /bin/sh # Attempt to guess a canonical system name. # Copyright 1992-2013 Free Software Foundation, Inc. timestamp='2013-06-10' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # # Originally written by Per Bothner. # # You can get the latest version of this script from: # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD # # Please send patches with a ChangeLog entry to config-patches@gnu.org. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright 1992-2013 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; dummy=$tmp/dummy ; tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int x;" > $dummy.c ; for c in cc gcc c89 c99 ; do if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown case "${UNAME_SYSTEM}" in Linux|GNU|GNU/*) # If the system lacks a compiler, then just pick glibc. # We could probably try harder. LIBC=gnu eval $set_cc_for_build cat <<-EOF > $dummy.c #include #if defined(__UCLIBC__) LIBC=uclibc #elif defined(__dietlibc__) LIBC=dietlibc #else LIBC=gnu #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` ;; esac # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` case "${UNAME_MACHINE_ARCH}" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. case "${UNAME_MACHINE_ARCH}" in arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ELF__ then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case "${UNAME_VERSION}" in Debian*) release='-gnu' ;; *) release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit ;; *:Bitrig:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE} exit ;; *:OpenBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} exit ;; *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} exit ;; *:SolidBSD:*:*) echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} exit ;; macppc:MirBSD:*:*) echo powerpc-unknown-mirbsd${UNAME_RELEASE} exit ;; *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") UNAME_MACHINE="alpha" ;; "EV4.5 (21064)") UNAME_MACHINE="alpha" ;; "LCA4 (21066/21068)") UNAME_MACHINE="alpha" ;; "EV5 (21164)") UNAME_MACHINE="alphaev5" ;; "EV5.6 (21164A)") UNAME_MACHINE="alphaev56" ;; "EV5.6 (21164PC)") UNAME_MACHINE="alphapca56" ;; "EV5.7 (21164PC)") UNAME_MACHINE="alphapca57" ;; "EV6 (21264)") UNAME_MACHINE="alphaev6" ;; "EV6.7 (21264A)") UNAME_MACHINE="alphaev67" ;; "EV6.8CB (21264C)") UNAME_MACHINE="alphaev68" ;; "EV6.8AL (21264B)") UNAME_MACHINE="alphaev68" ;; "EV6.8CX (21264D)") UNAME_MACHINE="alphaev68" ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE="alphaev69" ;; "EV7 (21364)") UNAME_MACHINE="alphaev7" ;; "EV7.9 (21364A)") UNAME_MACHINE="alphaev79" ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` # Reset EXIT trap before exiting to avoid spurious non-zero exit code. exitcode=$? trap '' 0 exit $exitcode ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix exit ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos exit ;; *:OS/390:*:*) echo i370-ibm-openedition exit ;; *:z/VM:*:*) echo s390-ibm-zvmoe exit ;; *:OS400:*:*) echo powerpc-ibm-os400 exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit ;; arm*:riscos:*:*|arm*:RISCOS:*:*) echo arm-unknown-riscos exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 exit ;; DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7; exit ;; esac ;; s390x:SunOS:*:*) echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) echo i386-pc-auroraux${UNAME_RELEASE} exit ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) eval $set_cc_for_build SUN_ARCH="i386" # If there is a compiler, see if it is configured for 64-bit objects. # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. # This test works for both compilers. if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then SUN_ARCH="x86_64" fi fi echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} ;; sun4) echo sparc-sun-sunos${UNAME_RELEASE} ;; esac exit ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit ;; m68k:machten:*:*) echo m68k-apple-machten${UNAME_RELEASE} exit ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && SYSTEM_NAME=`$dummy $dummyarg` && { echo "$SYSTEM_NAME"; exit; } echo mips-mips-riscos${UNAME_RELEASE} exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax exit ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax exit ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ [ ${TARGET_BINARY_INTERFACE}x = x ] then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi else echo i586-dg-dgux${UNAME_RELEASE} fi exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` then echo "$SYSTEM_NAME" else echo rs6000-ibm-aix3.2.5 fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit ;; *:AIX:*:[4567]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit ;; *:AIX:*:*) echo rs6000-ibm-aix exit ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 esac ;; esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if [ ${HP_ARCH} = "hppa2.0w" ] then eval $set_cc_for_build # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler # generating 64-bit code. GNU and HP use different nomenclature: # # $ CC_FOR_BUILD=cc ./config.guess # => hppa2.0w-hp-hpux11.23 # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | grep -q __LP64__ then HP_ARCH="hppa2.0w" else HP_ARCH="hppa64" fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} exit ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 exit ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi exit ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; *:UNICOS/mp:*:*) echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; 5000:UNIX_System_V:4.*:*) FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit ;; *:FreeBSD:*:*) UNAME_PROCESSOR=`/usr/bin/uname -p` case ${UNAME_PROCESSOR} in amd64) echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; *) echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; esac exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; *:MINGW64*:*) echo ${UNAME_MACHINE}-pc-mingw64 exit ;; *:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; i*:MSYS*:*) echo ${UNAME_MACHINE}-pc-msys exit ;; i*:windows32*:*) # uname -m includes "-pc" on this system. echo ${UNAME_MACHINE}-mingw32 exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; *:Interix*:*) case ${UNAME_MACHINE} in x86) echo i586-pc-interix${UNAME_RELEASE} exit ;; authenticamd | genuineintel | EM64T) echo x86_64-unknown-interix${UNAME_RELEASE} exit ;; IA64) echo ia64-unknown-interix${UNAME_RELEASE} exit ;; esac ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit ;; 8664:Windows_NT:*) echo x86_64-pc-mks exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix exit ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit ;; amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin exit ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; *:GNU:*:*) # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC} exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit ;; aarch64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; aarch64_be:Linux:*:*) UNAME_MACHINE=aarch64_be echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep -q ld.so.1 if test "$?" = 0 ; then LIBC="gnulibc1" ; fi echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; arc:Linux:*:* | arceb:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; arm*:Linux:*:*) eval $set_cc_for_build if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_EABI__ then echo ${UNAME_MACHINE}-unknown-linux-${LIBC} else if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_PCS_VFP then echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi else echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf fi fi exit ;; avr32*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; cris:Linux:*:*) echo ${UNAME_MACHINE}-axis-linux-${LIBC} exit ;; crisv32:Linux:*:*) echo ${UNAME_MACHINE}-axis-linux-${LIBC} exit ;; frv:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; hexagon:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; i*86:Linux:*:*) echo ${UNAME_MACHINE}-pc-linux-${LIBC} exit ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; m32r*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; mips:Linux:*:* | mips64:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef ${UNAME_MACHINE} #undef ${UNAME_MACHINE}el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=${UNAME_MACHINE}el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=${UNAME_MACHINE} #else CPU= #endif #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } ;; or1k:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; or32:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; padre:Linux:*:*) echo sparc-unknown-linux-${LIBC} exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-${LIBC} exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-${LIBC} ;; PA8*) echo hppa2.0-unknown-linux-${LIBC} ;; *) echo hppa-unknown-linux-${LIBC} ;; esac exit ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-${LIBC} exit ;; ppc:Linux:*:*) echo powerpc-unknown-linux-${LIBC} exit ;; ppc64le:Linux:*:*) echo powerpc64le-unknown-linux-${LIBC} exit ;; ppcle:Linux:*:*) echo powerpcle-unknown-linux-${LIBC} exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux-${LIBC} exit ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; tile*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; vax:Linux:*:*) echo ${UNAME_MACHINE}-dec-linux-${LIBC} exit ;; x86_64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; xtensa*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx exit ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop exit ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos exit ;; i*86:syllable:*:*) echo ${UNAME_MACHINE}-pc-syllable exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp exit ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit ;; i*86:*:5:[678]*) # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i586. # Note: whatever this is, it MUST be the same as what config.sub # prints for the "djgpp" host, or else GDB configury will decide that # this is a cross-build. echo i586-pc-msdosdjgpp exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit ;; paragon:*:*:*) echo i860-intel-osf1 exit ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv exit ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix exit ;; M68*:*:R3V[5678]*:*) test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; NCR*:*:4.2:* | MPRAS*:*:4.2:*) OS_REL='.3' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit ;; i*86:VOS:*:*) # From Paul.Green@stratus.com. echo ${UNAME_MACHINE}-stratus-vos exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit ;; BePC:Haiku:*:*) # Haiku running on Intel PC compatible. echo i586-pc-haiku exit ;; x86_64:Haiku:*:*) echo x86_64-unknown-haiku exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit ;; SX-7:SUPER-UX:*:*) echo sx7-nec-superux${UNAME_RELEASE} exit ;; SX-8:SUPER-UX:*:*) echo sx8-nec-superux${UNAME_RELEASE} exit ;; SX-8R:SUPER-UX:*:*) echo sx8r-nec-superux${UNAME_RELEASE} exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown eval $set_cc_for_build if test "$UNAME_PROCESSOR" = unknown ; then UNAME_PROCESSOR=powerpc fi if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then case $UNAME_PROCESSOR in i386) UNAME_PROCESSOR=x86_64 ;; powerpc) UNAME_PROCESSOR=powerpc64 ;; esac fi fi echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} exit ;; *:QNX:*:4*) echo i386-pc-qnx exit ;; NEO-?:NONSTOP_KERNEL:*:*) echo neo-tandem-nsk${UNAME_RELEASE} exit ;; NSE-*:NONSTOP_KERNEL:*:*) echo nse-tandem-nsk${UNAME_RELEASE} exit ;; NSR-?:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = "386"; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit ;; *:ITS:*:*) echo pdp10-unknown-its exit ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} exit ;; *:DragonFly:*:*) echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit ;; *:*VMS:*:*) UNAME_MACHINE=`(uname -p) 2>/dev/null` case "${UNAME_MACHINE}" in A*) echo alpha-dec-vms ; exit ;; I*) echo ia64-dec-vms ; exit ;; V*) echo vax-dec-vms ; exit ;; esac ;; *:XENIX:*:SysV) echo i386-pc-xenix exit ;; i*86:skyos:*:*) echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' exit ;; i*86:rdos:*:*) echo ${UNAME_MACHINE}-pc-rdos exit ;; i*86:AROS:*:*) echo ${UNAME_MACHINE}-pc-aros exit ;; x86_64:VMkernel:*:*) echo ${UNAME_MACHINE}-unknown-esx exit ;; esac eval $set_cc_for_build cat >$dummy.c < # include #endif main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (__arm) && defined (__acorn) && defined (__unix) printf ("arm-acorn-riscix\n"); exit (0); #endif #if defined (hp300) && !defined (hpux) printf ("m68k-hp-bsd\n"); exit (0); #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; if (version < 4) printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); else printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-pc-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) # if !defined (ultrix) # include # if defined (BSD) # if BSD == 43 printf ("vax-dec-bsd4.3\n"); exit (0); # else # if BSD == 199006 printf ("vax-dec-bsd4.3reno\n"); exit (0); # else printf ("vax-dec-bsd\n"); exit (0); # endif # endif # else printf ("vax-dec-bsd\n"); exit (0); # endif # else printf ("vax-dec-ultrix\n"); exit (0); # endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } # Apollos put the system type in the environment. test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } # Convex versions that predate uname can use getsysinfo(1) if [ -x /usr/convex/getsysinfo ] then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd exit ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; c34*) echo c34-convex-bsd exit ;; c38*) echo c38-convex-bsd exit ;; c4*) echo c4-convex-bsd exit ;; esac fi cat >&2 < in order to provide the needed information to handle your system. config.guess timestamp = $timestamp uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = ${UNAME_MACHINE} UNAME_RELEASE = ${UNAME_RELEASE} UNAME_SYSTEM = ${UNAME_SYSTEM} UNAME_VERSION = ${UNAME_VERSION} EOF exit 1 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: gpicview-0.2.4/Makefile.in0000644000000000000000000007301712231706055012277 00000000000000# Makefile.in generated by automake 1.14 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = . DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ $(top_srcdir)/configure $(am__configure_deps) \ $(srcdir)/config.h.in AUTHORS COPYING ChangeLog INSTALL NEWS \ README TODO compile config.guess config.sub install-sh missing \ ltmain.sh ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(icondir)" DATA = $(desktop_DATA) $(icon_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ cscope distdir dist dist-all distcheck am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ $(LISP)config.h.in # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags CSCOPE = cscope DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best DIST_TARGETS = dist-gzip distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ ADDITIONAL_FLAGS = @ADDITIONAL_FLAGS@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ X11_CFLAGS = @X11_CFLAGS@ X11_LIBS = @X11_LIBS@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ intltool__v_merge_options_ = @intltool__v_merge_options_@ intltool__v_merge_options_0 = @intltool__v_merge_options_0@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS} SUBDIRS = src po data EXTRA_DIST = \ autogen.sh \ gpicview.desktop.in \ gpicview.png desktopdir = $(datadir)/applications desktop_in_files = gpicview.desktop.in desktop_DATA = $(desktop_in_files:.desktop.in=.desktop) icondir = $(datadir)/icons/hicolor/48x48/apps icon_DATA = gpicview.png all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: Makefile @: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @test -f $@ || rm -f stamp-h1 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt install-desktopDATA: $(desktop_DATA) @$(NORMAL_INSTALL) @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(desktopdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(desktopdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(desktopdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(desktopdir)" || exit $$?; \ done uninstall-desktopDATA: @$(NORMAL_UNINSTALL) @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(desktopdir)'; $(am__uninstall_files_from_dir) install-iconDATA: $(icon_DATA) @$(NORMAL_INSTALL) @list='$(icon_DATA)'; test -n "$(icondir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(icondir)'"; \ $(MKDIR_P) "$(DESTDIR)$(icondir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(icondir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(icondir)" || exit $$?; \ done uninstall-iconDATA: @$(NORMAL_UNINSTALL) @list='$(icon_DATA)'; test -n "$(icondir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(icondir)'; $(am__uninstall_files_from_dir) # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-tarZ: distdir @echo WARNING: "Support for shar distribution archives is" \ "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir @echo WARNING: "Support for distribution archives compressed with" \ "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(DATA) config.h installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(icondir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-data-local install-desktopDATA \ install-iconDATA install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-desktopDATA uninstall-iconDATA .MAKE: $(am__recursive_targets) all install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ am--refresh check check-am clean clean-cscope clean-generic \ clean-libtool cscope cscopelist-am ctags ctags-am dist \ dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ dist-tarZ dist-xz dist-zip distcheck distclean \ distclean-generic distclean-hdr distclean-libtool \ distclean-tags distcleancheck distdir distuninstallcheck dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-data-local \ install-desktopDATA install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-iconDATA \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs installdirs-am \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-am uninstall uninstall-am uninstall-desktopDATA \ uninstall-iconDATA @INTLTOOL_DESKTOP_RULE@ install-data-local: @$(NORMAL_INSTALL) if test -d $(srcdir)/pixmaps; then \ $(mkinstalldirs) $(DESTDIR)$(pkgdatadir)/pixmaps; \ for pixmap in $(srcdir)/pixmaps/*; do \ if test -f $$pixmap; then \ $(INSTALL_DATA) $$pixmap $(DESTDIR)$(pkgdatadir)/pixmaps; \ fi \ done \ fi dist-hook: if test -d pixmaps; then \ mkdir $(distdir)/pixmaps; \ for pixmap in pixmaps/*; do \ if test -f $$pixmap; then \ cp -p $$pixmap $(distdir)/pixmaps; \ fi \ done \ fi # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: gpicview-0.2.4/config.sub0000755000000000000000000010535412231706055012215 00000000000000#! /bin/sh # Configuration validation subroutine script. # Copyright 1992-2013 Free Software Foundation, Inc. timestamp='2013-08-10' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # Please send patches with a ChangeLog entry to config-patches@gnu.org. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # You can get the latest version of this script from: # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS $0 [OPTION] ALIAS Canonicalize a configuration name. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright 1992-2013 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo $1 exit ;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ knetbsd*-gnu* | netbsd*-gnu* | \ kopensolaris*-gnu* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; android-linux) os=-linux-android basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis | -knuth | -cray | -microblaze*) os= basic_machine=$1 ;; -bluegene*) os=-cnk ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco6) os=-sco5v6 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5v6*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -lynx*178) os=-lynxos178 ;; -lynx*5) os=-lynxos5 ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | aarch64 | aarch64_be \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ | arc | arceb \ | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ | avr | avr32 \ | be32 | be64 \ | bfin \ | c4x | c8051 | clipper \ | d10v | d30v | dlx | dsp16xx \ | epiphany \ | fido | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | hexagon \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ | le32 | le64 \ | lm32 \ | m32c | m32r | m32rle | m68000 | m68k | m88k \ | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ | mips64octeon | mips64octeonel \ | mips64orion | mips64orionel \ | mips64r5900 | mips64r5900el \ | mips64vr | mips64vrel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa64 | mipsisa64el \ | mipsisa64r2 | mipsisa64r2el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipsr5900 | mipsr5900el \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ | moxie \ | mt \ | msp430 \ | nds32 | nds32le | nds32be \ | nios | nios2 | nios2eb | nios2el \ | ns16k | ns32k \ | open8 \ | or1k | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle \ | pyramid \ | rl78 | rx \ | score \ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ | spu \ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ | ubicom32 \ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ | we32k \ | x86 | xc16x | xstormy16 | xtensa \ | z8k | z80) basic_machine=$basic_machine-unknown ;; c54x) basic_machine=tic54x-unknown ;; c55x) basic_machine=tic55x-unknown ;; c6x) basic_machine=tic6x-unknown ;; m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip) basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; ms1) basic_machine=mt-unknown ;; strongarm | thumb | xscale) basic_machine=arm-unknown ;; xgate) basic_machine=$basic_machine-unknown os=-none ;; xscaleeb) basic_machine=armeb-unknown ;; xscaleel) basic_machine=armel-unknown ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | aarch64-* | aarch64_be-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ | be32-* | be64-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* \ | c8051-* | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | hexagon-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ | le32-* | le64-* \ | lm32-* \ | m32c-* | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ | microblaze-* | microblazeel-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ | mips64octeon-* | mips64octeonel-* \ | mips64orion-* | mips64orionel-* \ | mips64r5900-* | mips64r5900el-* \ | mips64vr-* | mips64vrel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa64-* | mipsisa64el-* \ | mipsisa64r2-* | mipsisa64r2el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipsr5900-* | mipsr5900el-* \ | mipstx39-* | mipstx39el-* \ | mmix-* \ | mt-* \ | msp430-* \ | nds32-* | nds32le-* | nds32be-* \ | nios-* | nios2-* | nios2eb-* | nios2el-* \ | none-* | np1-* | ns16k-* | ns32k-* \ | open8-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ | pyramid-* \ | rl78-* | romp-* | rs6000-* | rx-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ | tahoe-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tile*-* \ | tron-* \ | ubicom32-* \ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ | vax-* \ | we32k-* \ | x86-* | x86_64-* | xc16x-* | xps100-* \ | xstormy16-* | xtensa*-* \ | ymp-* \ | z8k-* | z80-*) ;; # Recognize the basic CPU types without company name, with glob match. xtensa*) basic_machine=$basic_machine-unknown ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-unknown os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; abacus) basic_machine=abacus-unknown ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amd64) basic_machine=x86_64-pc ;; amd64-*) basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aros) basic_machine=i386-pc os=-aros ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; blackfin) basic_machine=bfin-unknown os=-linux ;; blackfin-*) basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; bluegene*) basic_machine=powerpc-ibm os=-cnk ;; c54x-*) basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` ;; c55x-*) basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` ;; c6x-*) basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` ;; c90) basic_machine=c90-cray os=-unicos ;; cegcc) basic_machine=arm-unknown os=-cegcc ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | j90) basic_machine=j90-cray os=-unicos ;; craynv) basic_machine=craynv-cray os=-unicosmp ;; cr16 | cr16-*) basic_machine=cr16-unknown os=-elf ;; crds | unos) basic_machine=m68k-crds ;; crisv32 | crisv32-* | etraxfs*) basic_machine=crisv32-axis ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; crx) basic_machine=crx-unknown os=-elf ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; decsystem10* | dec10*) basic_machine=pdp10-dec os=-tops10 ;; decsystem20* | dec20*) basic_machine=pdp10-dec os=-tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; dicos) basic_machine=i686-pc os=-dicos ;; djgpp) basic_machine=i586-pc os=-msdosdjgpp ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppa-next) os=-nextstep3 ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; i386-vsta | vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m68knommu) basic_machine=m68k-unknown os=-linux ;; m68knommu-*) basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; m88k-omron*) basic_machine=m88k-omron ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; microblaze*) basic_machine=microblaze-xilinx ;; mingw64) basic_machine=x86_64-pc os=-mingw64 ;; mingw32) basic_machine=i686-pc os=-mingw32 ;; mingw32ce) basic_machine=arm-unknown os=-mingw32ce ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; monitor) basic_machine=m68k-rom68k os=-coff ;; morphos) basic_machine=powerpc-unknown os=-morphos ;; msdos) basic_machine=i386-pc os=-msdos ;; ms1-*) basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` ;; msys) basic_machine=i686-pc os=-msys ;; mvs) basic_machine=i370-ibm os=-mvs ;; nacl) basic_machine=le32-unknown os=-nacl ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; neo-tandem) basic_machine=neo-tandem ;; nse-tandem) basic_machine=nse-tandem ;; nsr-tandem) basic_machine=nsr-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; openrisc | openrisc-*) basic_machine=or32-unknown ;; os400) basic_machine=powerpc-ibm os=-os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; parisc) basic_machine=hppa-unknown os=-linux ;; parisc-*) basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pc98) basic_machine=i386-pc ;; pc98-*) basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; pentium4) basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium4-*) basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc | ppcbe) basic_machine=powerpc-unknown ;; ppc-* | ppcbe-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rdos | rdos64) basic_machine=x86_64-pc os=-rdos ;; rdos32) basic_machine=i386-pc os=-rdos ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; s390 | s390-*) basic_machine=s390-ibm ;; s390x | s390x-*) basic_machine=s390x-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sb1) basic_machine=mipsisa64sb1-unknown ;; sb1el) basic_machine=mipsisa64sb1el-unknown ;; sde) basic_machine=mipsisa32-sde os=-elf ;; sei) basic_machine=mips-sei os=-seiux ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sh5el) basic_machine=sh5le-unknown ;; sh64) basic_machine=sh64-unknown ;; sparclite-wrs | simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; strongarm-* | thumb-*) basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=alphaev5-cray os=-unicos ;; t90) basic_machine=t90-cray os=-unicos ;; tile*) basic_machine=$basic_machine-unknown os=-linux-gnu ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; toad1) basic_machine=pdp10-xkl os=-tops20 ;; tower | tower-32) basic_machine=m68k-ncr ;; tpf) basic_machine=s390x-ibm os=-tpf ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; xbox) basic_machine=i686-pc os=-mingw32 ;; xps | xps100) basic_machine=xps100-honeywell ;; xscale-* | xscalee[bl]-*) basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` ;; ymp) basic_machine=ymp-cray os=-unicos ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim ;; z80-*-coff) basic_machine=z80-unknown os=-sim ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; romp) basic_machine=romp-ibm ;; mmix) basic_machine=mmix-knuth ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp10) # there are many clones, so DEC is not a safe bet basic_machine=pdp10-unknown ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. -auroraux) os=-auroraux ;; -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -svr4*) os=-sysv4 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ | -sym* | -kopensolaris* | -plan9* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* | -aros* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ | -bitrig* | -openbsd* | -solidbsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* | -cegcc* \ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ | -linux-newlib* | -linux-musl* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto-qnx*) ;; -nto*) os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; -linux-dietlibc) os=-linux-dietlibc ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -os400*) os=-os400 ;; -wince*) os=-wince ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -atheos*) os=-atheos ;; -syllable*) os=-syllable ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -nova*) os=-rtmk-nova ;; -ns2 ) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -tpf*) os=-tpf ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -es1800*) os=-ose ;; -xenix) os=-xenix ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -aros*) os=-aros ;; -zvmoe) os=-zvmoe ;; -dicos*) os=-dicos ;; -nacl*) ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in score-*) os=-elf ;; spu-*) os=-elf ;; *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; c4x-* | tic4x-*) os=-coff ;; c8051-*) os=-elf ;; hexagon-*) os=-elf ;; tic54x-*) os=-coff ;; tic55x-*) os=-coff ;; tic6x-*) os=-coff ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 ;; m68*-cisco) os=-aout ;; mep-*) os=-elf ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; or1k-*) os=-elf ;; or32-*) os=-coff ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-be) os=-beos ;; *-haiku) os=-haiku ;; *-ibm) os=-aix ;; *-knuth) os=-mmixware ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next ) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -cnk*|-aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -os400*) vendor=ibm ;; -ptx*) vendor=sequent ;; -tpf*) vendor=ibm ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os exit # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: gpicview-0.2.4/aclocal.m40000644000000000000000000136040212231706050012063 00000000000000# generated automatically by aclocal 1.14 -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, [m4_warning([this file was generated for autoconf 2.69. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically 'autoreconf'.])]) # Copyright (C) 1995-2002 Free Software Foundation, Inc. # Copyright (C) 2001-2003,2004 Red Hat, Inc. # # This file is free software, distributed under the terms of the GNU # General Public License. As a special exception to the GNU General # Public License, this file may be distributed as part of a program # that contains a configuration script generated by Autoconf, under # the same distribution terms as the rest of that program. # # This file can be copied and used freely without restrictions. It can # be used in projects which are not available under the GNU Public License # but which still want to provide support for the GNU gettext functionality. # # Macro to add for using GNU gettext. # Ulrich Drepper , 1995, 1996 # # Modified to never use included libintl. # Owen Taylor , 12/15/1998 # # Major rework to remove unused code # Owen Taylor , 12/11/2002 # # Added better handling of ALL_LINGUAS from GNU gettext version # written by Bruno Haible, Owen Taylor 5/30/3002 # # Modified to require ngettext # Matthias Clasen 08/06/2004 # # We need this here as well, since someone might use autoconf-2.5x # to configure GLib then an older version to configure a package # using AM_GLIB_GNU_GETTEXT AC_PREREQ(2.53) dnl dnl We go to great lengths to make sure that aclocal won't dnl try to pull in the installed version of these macros dnl when running aclocal in the glib directory. dnl m4_copy([AC_DEFUN],[glib_DEFUN]) m4_copy([AC_REQUIRE],[glib_REQUIRE]) dnl dnl At the end, if we're not within glib, we'll define the public dnl definitions in terms of our private definitions. dnl # GLIB_LC_MESSAGES #-------------------- glib_DEFUN([GLIB_LC_MESSAGES], [AC_CHECK_HEADERS([locale.h]) if test $ac_cv_header_locale_h = yes; then AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, [AC_TRY_LINK([#include ], [return LC_MESSAGES], am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) if test $am_cv_val_LC_MESSAGES = yes; then AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your file defines LC_MESSAGES.]) fi fi]) # GLIB_PATH_PROG_WITH_TEST #---------------------------- dnl GLIB_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) glib_DEFUN([GLIB_PATH_PROG_WITH_TEST], [# Extract the first word of "$2", so it can be a program name with args. set dummy $2; ac_word=[$]2 AC_MSG_CHECKING([for $ac_word]) AC_CACHE_VAL(ac_cv_path_$1, [case "[$]$1" in /*) ac_cv_path_$1="[$]$1" # Let the user override the test with a path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in ifelse([$5], , $PATH, [$5]); do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if [$3]; then ac_cv_path_$1="$ac_dir/$ac_word" break fi fi done IFS="$ac_save_ifs" dnl If no 4th arg is given, leave the cache variable unset, dnl so AC_PATH_PROGS will keep looking. ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" ])dnl ;; esac])dnl $1="$ac_cv_path_$1" if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then AC_MSG_RESULT([$]$1) else AC_MSG_RESULT(no) fi AC_SUBST($1)dnl ]) # GLIB_WITH_NLS #----------------- glib_DEFUN([GLIB_WITH_NLS], dnl NLS is obligatory [USE_NLS=yes AC_SUBST(USE_NLS) gt_cv_have_gettext=no CATOBJEXT=NONE XGETTEXT=: INTLLIBS= AC_CHECK_HEADER(libintl.h, [gt_cv_func_dgettext_libintl="no" libintl_extra_libs="" # # First check in libc # AC_CACHE_CHECK([for ngettext in libc], gt_cv_func_ngettext_libc, [AC_TRY_LINK([ #include ], [return !ngettext ("","", 1)], gt_cv_func_ngettext_libc=yes, gt_cv_func_ngettext_libc=no) ]) if test "$gt_cv_func_ngettext_libc" = "yes" ; then AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc, [AC_TRY_LINK([ #include ], [return !dgettext ("","")], gt_cv_func_dgettext_libc=yes, gt_cv_func_dgettext_libc=no) ]) fi if test "$gt_cv_func_ngettext_libc" = "yes" ; then AC_CHECK_FUNCS(bind_textdomain_codeset) fi # # If we don't have everything we want, check in libintl # if test "$gt_cv_func_dgettext_libc" != "yes" \ || test "$gt_cv_func_ngettext_libc" != "yes" \ || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then AC_CHECK_LIB(intl, bindtextdomain, [AC_CHECK_LIB(intl, ngettext, [AC_CHECK_LIB(intl, dgettext, gt_cv_func_dgettext_libintl=yes)])]) if test "$gt_cv_func_dgettext_libintl" != "yes" ; then AC_MSG_CHECKING([if -liconv is needed to use gettext]) AC_MSG_RESULT([]) AC_CHECK_LIB(intl, ngettext, [AC_CHECK_LIB(intl, dcgettext, [gt_cv_func_dgettext_libintl=yes libintl_extra_libs=-liconv], :,-liconv)], :,-liconv) fi # # If we found libintl, then check in it for bind_textdomain_codeset(); # we'll prefer libc if neither have bind_textdomain_codeset(), # and both have dgettext and ngettext # if test "$gt_cv_func_dgettext_libintl" = "yes" ; then glib_save_LIBS="$LIBS" LIBS="$LIBS -lintl $libintl_extra_libs" unset ac_cv_func_bind_textdomain_codeset AC_CHECK_FUNCS(bind_textdomain_codeset) LIBS="$glib_save_LIBS" if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then gt_cv_func_dgettext_libc=no else if test "$gt_cv_func_dgettext_libc" = "yes" \ && test "$gt_cv_func_ngettext_libc" = "yes"; then gt_cv_func_dgettext_libintl=no fi fi fi fi if test "$gt_cv_func_dgettext_libc" = "yes" \ || test "$gt_cv_func_dgettext_libintl" = "yes"; then gt_cv_have_gettext=yes fi if test "$gt_cv_func_dgettext_libintl" = "yes"; then INTLLIBS="-lintl $libintl_extra_libs" fi if test "$gt_cv_have_gettext" = "yes"; then AC_DEFINE(HAVE_GETTEXT,1, [Define if the GNU gettext() function is already present or preinstalled.]) GLIB_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl if test "$MSGFMT" != "no"; then glib_save_LIBS="$LIBS" LIBS="$LIBS $INTLLIBS" AC_CHECK_FUNCS(dcgettext) MSGFMT_OPTS= AC_MSG_CHECKING([if msgfmt accepts -c]) GLIB_RUN_PROG([$MSGFMT -c -o /dev/null],[ msgid "" msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Project-Id-Version: test 1.0\n" "PO-Revision-Date: 2007-02-15 12:01+0100\n" "Last-Translator: test \n" "Language-Team: C \n" "MIME-Version: 1.0\n" "Content-Transfer-Encoding: 8bit\n" ], [MSGFMT_OPTS=-c; AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no])]) AC_SUBST(MSGFMT_OPTS) AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) GLIB_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) AC_TRY_LINK(, [extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr], [CATOBJEXT=.gmo DATADIRNAME=share], [case $host in *-*-solaris*) dnl On Solaris, if bind_textdomain_codeset is in libc, dnl GNU format message catalog is always supported, dnl since both are added to the libc all together. dnl Hence, we'd like to go with DATADIRNAME=share and dnl and CATOBJEXT=.gmo in this case. AC_CHECK_FUNC(bind_textdomain_codeset, [CATOBJEXT=.gmo DATADIRNAME=share], [CATOBJEXT=.mo DATADIRNAME=lib]) ;; *-*-openbsd*) CATOBJEXT=.mo DATADIRNAME=share ;; *) CATOBJEXT=.mo DATADIRNAME=lib ;; esac]) LIBS="$glib_save_LIBS" INSTOBJEXT=.mo else gt_cv_have_gettext=no fi fi ]) if test "$gt_cv_have_gettext" = "yes" ; then AC_DEFINE(ENABLE_NLS, 1, [always defined to indicate that i18n is enabled]) fi dnl Test whether we really found GNU xgettext. if test "$XGETTEXT" != ":"; then dnl If it is not GNU xgettext we define it as : so that the dnl Makefiles still can work. if $XGETTEXT --omit-header /dev/null 2> /dev/null; then : ; else AC_MSG_RESULT( [found xgettext program is not GNU xgettext; ignore it]) XGETTEXT=":" fi fi # We need to process the po/ directory. POSUB=po AC_OUTPUT_COMMANDS( [case "$CONFIG_FILES" in *po/Makefile.in*) sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile esac]) dnl These rules are solely for the distribution goal. While doing this dnl we only have to keep exactly one list of the available catalogs dnl in configure.ac. for lang in $ALL_LINGUAS; do GMOFILES="$GMOFILES $lang.gmo" POFILES="$POFILES $lang.po" done dnl Make all variables we use known to autoconf. AC_SUBST(CATALOGS) AC_SUBST(CATOBJEXT) AC_SUBST(DATADIRNAME) AC_SUBST(GMOFILES) AC_SUBST(INSTOBJEXT) AC_SUBST(INTLLIBS) AC_SUBST(PO_IN_DATADIR_TRUE) AC_SUBST(PO_IN_DATADIR_FALSE) AC_SUBST(POFILES) AC_SUBST(POSUB) ]) # AM_GLIB_GNU_GETTEXT # ------------------- # Do checks necessary for use of gettext. If a suitable implementation # of gettext is found in either in libintl or in the C library, # it will set INTLLIBS to the libraries needed for use of gettext # and AC_DEFINE() HAVE_GETTEXT and ENABLE_NLS. (The shell variable # gt_cv_have_gettext will be set to "yes".) It will also call AC_SUBST() # on various variables needed by the Makefile.in.in installed by # glib-gettextize. dnl glib_DEFUN([GLIB_GNU_GETTEXT], [AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_HEADER_STDC])dnl GLIB_LC_MESSAGES GLIB_WITH_NLS if test "$gt_cv_have_gettext" = "yes"; then if test "x$ALL_LINGUAS" = "x"; then LINGUAS= else AC_MSG_CHECKING(for catalogs to be installed) NEW_LINGUAS= for presentlang in $ALL_LINGUAS; do useit=no if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then desiredlanguages="$LINGUAS" else desiredlanguages="$ALL_LINGUAS" fi for desiredlang in $desiredlanguages; do # Use the presentlang catalog if desiredlang is # a. equal to presentlang, or # b. a variant of presentlang (because in this case, # presentlang can be used as a fallback for messages # which are not translated in the desiredlang catalog). case "$desiredlang" in "$presentlang"*) useit=yes;; esac done if test $useit = yes; then NEW_LINGUAS="$NEW_LINGUAS $presentlang" fi done LINGUAS=$NEW_LINGUAS AC_MSG_RESULT($LINGUAS) fi dnl Construct list of names of catalog files to be constructed. if test -n "$LINGUAS"; then for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done fi fi dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly dnl find the mkinstalldirs script in another subdir but ($top_srcdir). dnl Try to locate is. MKINSTALLDIRS= if test -n "$ac_aux_dir"; then MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" fi if test -z "$MKINSTALLDIRS"; then MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" fi AC_SUBST(MKINSTALLDIRS) dnl Generate list of files to be processed by xgettext which will dnl be included in po/Makefile. test -d po || mkdir po if test "x$srcdir" != "x."; then if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then posrcprefix="$srcdir/" else posrcprefix="../$srcdir/" fi else posrcprefix="../" fi rm -f po/POTFILES sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ < $srcdir/po/POTFILES.in > po/POTFILES ]) # AM_GLIB_DEFINE_LOCALEDIR(VARIABLE) # ------------------------------- # Define VARIABLE to the location where catalog files will # be installed by po/Makefile. glib_DEFUN([GLIB_DEFINE_LOCALEDIR], [glib_REQUIRE([GLIB_GNU_GETTEXT])dnl glib_save_prefix="$prefix" glib_save_exec_prefix="$exec_prefix" glib_save_datarootdir="$datarootdir" test "x$prefix" = xNONE && prefix=$ac_default_prefix test "x$exec_prefix" = xNONE && exec_prefix=$prefix datarootdir=`eval echo "${datarootdir}"` if test "x$CATOBJEXT" = "x.mo" ; then localedir=`eval echo "${libdir}/locale"` else localedir=`eval echo "${datadir}/locale"` fi prefix="$glib_save_prefix" exec_prefix="$glib_save_exec_prefix" datarootdir="$glib_save_datarootdir" AC_DEFINE_UNQUOTED($1, "$localedir", [Define the location where the catalogs will be installed]) ]) dnl dnl Now the definitions that aclocal will find dnl ifdef(glib_configure_ac,[],[ AC_DEFUN([AM_GLIB_GNU_GETTEXT],[GLIB_GNU_GETTEXT($@)]) AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR],[GLIB_DEFINE_LOCALEDIR($@)]) ])dnl # GLIB_RUN_PROG(PROGRAM, TEST-FILE, [ACTION-IF-PASS], [ACTION-IF-FAIL]) # # Create a temporary file with TEST-FILE as its contents and pass the # file name to PROGRAM. Perform ACTION-IF-PASS if PROGRAM exits with # 0 and perform ACTION-IF-FAIL for any other exit status. AC_DEFUN([GLIB_RUN_PROG], [cat >conftest.foo <<_ACEOF $2 _ACEOF if AC_RUN_LOG([$1 conftest.foo]); then m4_ifval([$3], [$3], [:]) m4_ifvaln([$4], [else $4])dnl echo "$as_me: failed input was:" >&AS_MESSAGE_LOG_FD sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD fi]) dnl IT_PROG_INTLTOOL([MINIMUM-VERSION], [no-xml]) # serial 42 IT_PROG_INTLTOOL AC_DEFUN([IT_PROG_INTLTOOL], [ AC_PREREQ([2.50])dnl AC_REQUIRE([AM_NLS])dnl case "$am__api_version" in 1.[01234]) AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool]) ;; *) ;; esac INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` if test -n "$1"; then AC_MSG_CHECKING([for intltool >= $1]) AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found]) test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || AC_MSG_ERROR([Your intltool is too old. You need intltool $1 or later.]) fi AC_PATH_PROG(INTLTOOL_UPDATE, [intltool-update]) AC_PATH_PROG(INTLTOOL_MERGE, [intltool-merge]) AC_PATH_PROG(INTLTOOL_EXTRACT, [intltool-extract]) if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then AC_MSG_ERROR([The intltool scripts were not found. Please install intltool.]) fi if test -z "$AM_DEFAULT_VERBOSITY"; then AM_DEFAULT_VERBOSITY=1 fi AC_SUBST([AM_DEFAULT_VERBOSITY]) INTLTOOL_V_MERGE='$(INTLTOOL__v_MERGE_$(V))' INTLTOOL__v_MERGE_='$(INTLTOOL__v_MERGE_$(AM_DEFAULT_VERBOSITY))' INTLTOOL__v_MERGE_0='@echo " ITMRG " [$]@;' AC_SUBST(INTLTOOL_V_MERGE) AC_SUBST(INTLTOOL__v_MERGE_) AC_SUBST(INTLTOOL__v_MERGE_0) INTLTOOL_V_MERGE_OPTIONS='$(intltool__v_merge_options_$(V))' intltool__v_merge_options_='$(intltool__v_merge_options_$(AM_DEFAULT_VERBOSITY))' intltool__v_merge_options_0='-q' AC_SUBST(INTLTOOL_V_MERGE_OPTIONS) AC_SUBST(intltool__v_merge_options_) AC_SUBST(intltool__v_merge_options_0) INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -p $(top_srcdir)/po $< [$]@' INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge 5000; then INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u --no-translations $< [$]@' else INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)_it_tmp_dir=tmp.intltool.[$][$]RANDOM && mkdir [$][$]_it_tmp_dir && LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u [$][$]_it_tmp_dir $< [$]@ && rmdir [$][$]_it_tmp_dir' fi INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' _IT_SUBST(INTLTOOL_DESKTOP_RULE) _IT_SUBST(INTLTOOL_DIRECTORY_RULE) _IT_SUBST(INTLTOOL_KEYS_RULE) _IT_SUBST(INTLTOOL_PROP_RULE) _IT_SUBST(INTLTOOL_OAF_RULE) _IT_SUBST(INTLTOOL_PONG_RULE) _IT_SUBST(INTLTOOL_SERVER_RULE) _IT_SUBST(INTLTOOL_SHEET_RULE) _IT_SUBST(INTLTOOL_SOUNDLIST_RULE) _IT_SUBST(INTLTOOL_UI_RULE) _IT_SUBST(INTLTOOL_XAM_RULE) _IT_SUBST(INTLTOOL_KBD_RULE) _IT_SUBST(INTLTOOL_XML_RULE) _IT_SUBST(INTLTOOL_XML_NOMERGE_RULE) _IT_SUBST(INTLTOOL_CAVES_RULE) _IT_SUBST(INTLTOOL_SCHEMAS_RULE) _IT_SUBST(INTLTOOL_THEME_RULE) _IT_SUBST(INTLTOOL_SERVICE_RULE) _IT_SUBST(INTLTOOL_POLICY_RULE) # Check the gettext tools to make sure they are GNU AC_PATH_PROG(XGETTEXT, xgettext) AC_PATH_PROG(MSGMERGE, msgmerge) AC_PATH_PROG(MSGFMT, msgfmt) AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) fi xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) fi AC_PATH_PROG(INTLTOOL_PERL, perl) if test -z "$INTLTOOL_PERL"; then AC_MSG_ERROR([perl not found]) fi AC_MSG_CHECKING([for perl >= 5.8.1]) $INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 if test $? -ne 0; then AC_MSG_ERROR([perl 5.8.1 is required for intltool]) else IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"` AC_MSG_RESULT([$IT_PERL_VERSION]) fi if test "x$2" != "xno-xml"; then AC_MSG_CHECKING([for XML::Parser]) if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then AC_MSG_RESULT([ok]) else AC_MSG_ERROR([XML::Parser perl module is required for intltool]) fi fi # Substitute ALL_LINGUAS so we can use it in po/Makefile AC_SUBST(ALL_LINGUAS) # Set DATADIRNAME correctly if it is not set yet # (copied from glib-gettext.m4) if test -z "$DATADIRNAME"; then AC_LINK_IFELSE( [AC_LANG_PROGRAM([[]], [[extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr]])], [DATADIRNAME=share], [case $host in *-*-solaris*) dnl On Solaris, if bind_textdomain_codeset is in libc, dnl GNU format message catalog is always supported, dnl since both are added to the libc all together. dnl Hence, we'd like to go with DATADIRNAME=share dnl in this case. AC_CHECK_FUNC(bind_textdomain_codeset, [DATADIRNAME=share], [DATADIRNAME=lib]) ;; *) [DATADIRNAME=lib] ;; esac]) fi AC_SUBST(DATADIRNAME) IT_PO_SUBDIR([po]) ]) # IT_PO_SUBDIR(DIRNAME) # --------------------- # All po subdirs have to be declared with this macro; the subdir "po" is # declared by IT_PROG_INTLTOOL. # AC_DEFUN([IT_PO_SUBDIR], [AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS. dnl dnl The following CONFIG_COMMANDS should be executed at the very end dnl of config.status. AC_CONFIG_COMMANDS_PRE([ AC_CONFIG_COMMANDS([$1/stamp-it], [ if [ ! grep "^# INTLTOOL_MAKEFILE$" "$1/Makefile.in" > /dev/null ]; then AC_MSG_ERROR([$1/Makefile.in.in was not created by intltoolize.]) fi rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp" >"$1/stamp-it.tmp" [sed '/^#/d s/^[[].*] *// /^[ ]*$/d '"s|^| $ac_top_srcdir/|" \ "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES" ] [sed '/^POTFILES =/,/[^\\]$/ { /^POTFILES =/!d r $1/POTFILES } ' "$1/Makefile.in" >"$1/Makefile"] rm -f "$1/Makefile.tmp" mv "$1/stamp-it.tmp" "$1/stamp-it" ]) ])dnl ]) # _IT_SUBST(VARIABLE) # ------------------- # Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST # AC_DEFUN([_IT_SUBST], [ AC_SUBST([$1]) m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])]) ] ) # deprecated macros AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL]) # A hint is needed for aclocal from Automake <= 1.9.4: # AC_DEFUN([AC_PROG_INTLTOOL], ...) # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010, 2011 Free Software # Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. m4_define([_LT_COPYING], [dnl # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010, 2011 Free Software # Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. # # GNU Libtool is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, or # obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ]) # serial 57 LT_INIT # LT_PREREQ(VERSION) # ------------------ # Complain and exit if this libtool version is less that VERSION. m4_defun([LT_PREREQ], [m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, [m4_default([$3], [m4_fatal([Libtool version $1 or higher is required], 63)])], [$2])]) # _LT_CHECK_BUILDDIR # ------------------ # Complain if the absolute build directory name contains unusual characters m4_defun([_LT_CHECK_BUILDDIR], [case `pwd` in *\ * | *\ *) AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; esac ]) # LT_INIT([OPTIONS]) # ------------------ AC_DEFUN([LT_INIT], [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl AC_BEFORE([$0], [LT_LANG])dnl AC_BEFORE([$0], [LT_OUTPUT])dnl AC_BEFORE([$0], [LTDL_INIT])dnl m4_require([_LT_CHECK_BUILDDIR])dnl dnl Autoconf doesn't catch unexpanded LT_ macros by default: m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 dnl unless we require an AC_DEFUNed macro: AC_REQUIRE([LTOPTIONS_VERSION])dnl AC_REQUIRE([LTSUGAR_VERSION])dnl AC_REQUIRE([LTVERSION_VERSION])dnl AC_REQUIRE([LTOBSOLETE_VERSION])dnl m4_require([_LT_PROG_LTMAIN])dnl _LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) dnl Parse OPTIONS _LT_SET_OPTIONS([$0], [$1]) # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl _LT_SETUP # Only expand once: m4_define([LT_INIT]) ])# LT_INIT # Old names: AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PROG_LIBTOOL], []) dnl AC_DEFUN([AM_PROG_LIBTOOL], []) # _LT_CC_BASENAME(CC) # ------------------- # Calculate cc_basename. Skip known compiler wrappers and cross-prefix. m4_defun([_LT_CC_BASENAME], [for cc_temp in $1""; do case $cc_temp in compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` ]) # _LT_FILEUTILS_DEFAULTS # ---------------------- # It is okay to use these file commands and assume they have been set # sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. m4_defun([_LT_FILEUTILS_DEFAULTS], [: ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} ])# _LT_FILEUTILS_DEFAULTS # _LT_SETUP # --------- m4_defun([_LT_SETUP], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl _LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl dnl _LT_DECL([], [host_alias], [0], [The host system])dnl _LT_DECL([], [host], [0])dnl _LT_DECL([], [host_os], [0])dnl dnl _LT_DECL([], [build_alias], [0], [The build system])dnl _LT_DECL([], [build], [0])dnl _LT_DECL([], [build_os], [0])dnl dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl dnl AC_REQUIRE([AC_PROG_LN_S])dnl test -z "$LN_S" && LN_S="ln -s" _LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl dnl AC_REQUIRE([LT_CMD_MAX_LEN])dnl _LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl _LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl m4_require([_LT_CMD_RELOAD])dnl m4_require([_LT_CHECK_MAGIC_METHOD])dnl m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl m4_require([_LT_CMD_OLD_ARCHIVE])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_WITH_SYSROOT])dnl _LT_CONFIG_LIBTOOL_INIT([ # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi ]) if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi _LT_CHECK_OBJDIR m4_require([_LT_TAG_COMPILER])dnl case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o _LT_CC_BASENAME([$compiler]) # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then _LT_PATH_MAGIC fi ;; esac # Use C for the default configuration in the libtool script LT_SUPPORTED_TAG([CC]) _LT_LANG_C_CONFIG _LT_LANG_DEFAULT_CONFIG _LT_CONFIG_COMMANDS ])# _LT_SETUP # _LT_PREPARE_SED_QUOTE_VARS # -------------------------- # Define a few sed substitution that help us do robust quoting. m4_defun([_LT_PREPARE_SED_QUOTE_VARS], [# Backslashify metacharacters that are still active within # double-quoted strings. sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\([["`\\]]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' ]) # _LT_PROG_LTMAIN # --------------- # Note that this code is called both from `configure', and `config.status' # now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, # `config.status' has no value for ac_aux_dir unless we are using Automake, # so we pass a copy along to make sure it has a sensible value anyway. m4_defun([_LT_PROG_LTMAIN], [m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl _LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) ltmain="$ac_aux_dir/ltmain.sh" ])# _LT_PROG_LTMAIN # So that we can recreate a full libtool script including additional # tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS # in macros and then make a single call at the end using the `libtool' # label. # _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) # ---------------------------------------- # Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL_INIT], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_INIT], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_INIT]) # _LT_CONFIG_LIBTOOL([COMMANDS]) # ------------------------------ # Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) # _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) # ----------------------------------------------------- m4_defun([_LT_CONFIG_SAVE_COMMANDS], [_LT_CONFIG_LIBTOOL([$1]) _LT_CONFIG_LIBTOOL_INIT([$2]) ]) # _LT_FORMAT_COMMENT([COMMENT]) # ----------------------------- # Add leading comment marks to the start of each line, and a trailing # full-stop to the whole comment if one is not present already. m4_define([_LT_FORMAT_COMMENT], [m4_ifval([$1], [ m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) )]) # _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) # ------------------------------------------------------------------- # CONFIGNAME is the name given to the value in the libtool script. # VARNAME is the (base) name used in the configure script. # VALUE may be 0, 1 or 2 for a computed quote escaped value based on # VARNAME. Any other value will be used directly. m4_define([_LT_DECL], [lt_if_append_uniq([lt_decl_varnames], [$2], [, ], [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], [m4_ifval([$1], [$1], [$2])]) lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) m4_ifval([$4], [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) lt_dict_add_subkey([lt_decl_dict], [$2], [tagged?], [m4_ifval([$5], [yes], [no])])]) ]) # _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) # -------------------------------------------------------- m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) # lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_tag_varnames], [_lt_decl_filter([tagged?], [yes], $@)]) # _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) # --------------------------------------------------------- m4_define([_lt_decl_filter], [m4_case([$#], [0], [m4_fatal([$0: too few arguments: $#])], [1], [m4_fatal([$0: too few arguments: $#: $1])], [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], [lt_dict_filter([lt_decl_dict], $@)])[]dnl ]) # lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) # -------------------------------------------------- m4_define([lt_decl_quote_varnames], [_lt_decl_filter([value], [1], $@)]) # lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_dquote_varnames], [_lt_decl_filter([value], [2], $@)]) # lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_varnames_tagged], [m4_assert([$# <= 2])dnl _$0(m4_quote(m4_default([$1], [[, ]])), m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) m4_define([_lt_decl_varnames_tagged], [m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) # lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_all_varnames], [_$0(m4_quote(m4_default([$1], [[, ]])), m4_if([$2], [], m4_quote(lt_decl_varnames), m4_quote(m4_shift($@))))[]dnl ]) m4_define([_lt_decl_all_varnames], [lt_join($@, lt_decl_varnames_tagged([$1], lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl ]) # _LT_CONFIG_STATUS_DECLARE([VARNAME]) # ------------------------------------ # Quote a variable value, and forward it to `config.status' so that its # declaration there will have the same value as in `configure'. VARNAME # must have a single quote delimited value for this to work. m4_define([_LT_CONFIG_STATUS_DECLARE], [$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) # _LT_CONFIG_STATUS_DECLARATIONS # ------------------------------ # We delimit libtool config variables with single quotes, so when # we write them to config.status, we have to be sure to quote all # embedded single quotes properly. In configure, this macro expands # each variable declared with _LT_DECL (and _LT_TAGDECL) into: # # ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAGS # ---------------- # Output comment and list of tags supported by the script m4_defun([_LT_LIBTOOL_TAGS], [_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl available_tags="_LT_TAGS"dnl ]) # _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) # ----------------------------------- # Extract the dictionary values for VARNAME (optionally with TAG) and # expand to a commented shell variable setting: # # # Some comment about what VAR is for. # visible_name=$lt_internal_name m4_define([_LT_LIBTOOL_DECLARE], [_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [description])))[]dnl m4_pushdef([_libtool_name], m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), [0], [_libtool_name=[$]$1], [1], [_libtool_name=$lt_[]$1], [2], [_libtool_name=$lt_[]$1], [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl ]) # _LT_LIBTOOL_CONFIG_VARS # ----------------------- # Produce commented declarations of non-tagged libtool config variables # suitable for insertion in the LIBTOOL CONFIG section of the `libtool' # script. Tagged libtool config variables (even for the LIBTOOL CONFIG # section) are produced by _LT_LIBTOOL_TAG_VARS. m4_defun([_LT_LIBTOOL_CONFIG_VARS], [m4_foreach([_lt_var], m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAG_VARS(TAG) # ------------------------- m4_define([_LT_LIBTOOL_TAG_VARS], [m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) # _LT_TAGVAR(VARNAME, [TAGNAME]) # ------------------------------ m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) # _LT_CONFIG_COMMANDS # ------------------- # Send accumulated output to $CONFIG_STATUS. Thanks to the lists of # variables for single and double quote escaping we saved from calls # to _LT_DECL, we can put quote escaped variables declarations # into `config.status', and then the shell code to quote escape them in # for loops in `config.status'. Finally, any additional code accumulated # from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. m4_defun([_LT_CONFIG_COMMANDS], [AC_PROVIDE_IFELSE([LT_OUTPUT], dnl If the libtool generation code has been placed in $CONFIG_LT, dnl instead of duplicating it all over again into config.status, dnl then we will have config.status run $CONFIG_LT later, so it dnl needs to know what name is stored there: [AC_CONFIG_COMMANDS([libtool], [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], dnl If the libtool generation code is destined for config.status, dnl expand the accumulated commands and init code now: [AC_CONFIG_COMMANDS([libtool], [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) ])#_LT_CONFIG_COMMANDS # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], [ # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' _LT_CONFIG_STATUS_DECLARATIONS LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$[]1 _LTECHO_EOF' } # Quote evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_quote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_dquote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done _LT_OUTPUT_LIBTOOL_INIT ]) # _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) # ------------------------------------ # Generate a child script FILE with all initialization necessary to # reuse the environment learned by the parent script, and make the # file executable. If COMMENT is supplied, it is inserted after the # `#!' sequence but before initialization text begins. After this # macro, additional text can be appended to FILE to form the body of # the child script. The macro ends with non-zero status if the # file could not be fully written (such as if the disk is full). m4_ifdef([AS_INIT_GENERATED], [m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], [m4_defun([_LT_GENERATED_FILE_INIT], [m4_require([AS_PREPARE])]dnl [m4_pushdef([AS_MESSAGE_LOG_FD])]dnl [lt_write_fail=0 cat >$1 <<_ASEOF || lt_write_fail=1 #! $SHELL # Generated by $as_me. $2 SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$1 <<\_ASEOF || lt_write_fail=1 AS_SHELL_SANITIZE _AS_PREPARE exec AS_MESSAGE_FD>&1 _ASEOF test $lt_write_fail = 0 && chmod +x $1[]dnl m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT # LT_OUTPUT # --------- # This macro allows early generation of the libtool script (before # AC_OUTPUT is called), incase it is used in configure for compilation # tests. AC_DEFUN([LT_OUTPUT], [: ${CONFIG_LT=./config.lt} AC_MSG_NOTICE([creating $CONFIG_LT]) _LT_GENERATED_FILE_INIT(["$CONFIG_LT"], [# Run this file to recreate a libtool stub with the current configuration.]) cat >>"$CONFIG_LT" <<\_LTEOF lt_cl_silent=false exec AS_MESSAGE_LOG_FD>>config.log { echo AS_BOX([Running $as_me.]) } >&AS_MESSAGE_LOG_FD lt_cl_help="\ \`$as_me' creates a local libtool stub from the current configuration, for use in further configure time tests before the real libtool is generated. Usage: $[0] [[OPTIONS]] -h, --help print this help, then exit -V, --version print version number, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files Report bugs to ." lt_cl_version="\ m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) configured by $[0], generated by m4_PACKAGE_STRING. Copyright (C) 2011 Free Software Foundation, Inc. This config.lt script is free software; the Free Software Foundation gives unlimited permision to copy, distribute and modify it." while test $[#] != 0 do case $[1] in --version | --v* | -V ) echo "$lt_cl_version"; exit 0 ;; --help | --h* | -h ) echo "$lt_cl_help"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --quiet | --q* | --silent | --s* | -q ) lt_cl_silent=: ;; -*) AC_MSG_ERROR([unrecognized option: $[1] Try \`$[0] --help' for more information.]) ;; *) AC_MSG_ERROR([unrecognized argument: $[1] Try \`$[0] --help' for more information.]) ;; esac shift done if $lt_cl_silent; then exec AS_MESSAGE_FD>/dev/null fi _LTEOF cat >>"$CONFIG_LT" <<_LTEOF _LT_OUTPUT_LIBTOOL_COMMANDS_INIT _LTEOF cat >>"$CONFIG_LT" <<\_LTEOF AC_MSG_NOTICE([creating $ofile]) _LT_OUTPUT_LIBTOOL_COMMANDS AS_EXIT(0) _LTEOF chmod +x "$CONFIG_LT" # configure is writing to config.log, but config.lt does its own redirection, # appending to config.log, which fails on DOS, as config.log is still kept # open by configure. Here we exec the FD to /dev/null, effectively closing # config.log, so it can be properly (re)opened and appended to by config.lt. lt_cl_success=: test "$silent" = yes && lt_config_lt_args="$lt_config_lt_args --quiet" exec AS_MESSAGE_LOG_FD>/dev/null $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false exec AS_MESSAGE_LOG_FD>>config.log $lt_cl_success || AS_EXIT(1) ])# LT_OUTPUT # _LT_CONFIG(TAG) # --------------- # If TAG is the built-in tag, create an initial libtool script with a # default configuration from the untagged config vars. Otherwise add code # to config.status for appending the configuration named by TAG from the # matching tagged config vars. m4_defun([_LT_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_CONFIG_SAVE_COMMANDS([ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl m4_if(_LT_TAG, [C], [ # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi cfgfile="${ofile}T" trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # _LT_COPYING _LT_LIBTOOL_TAGS # ### BEGIN LIBTOOL CONFIG _LT_LIBTOOL_CONFIG_VARS _LT_LIBTOOL_TAG_VARS # ### END LIBTOOL CONFIG _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac _LT_PROG_LTMAIN # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) _LT_PROG_REPLACE_SHELLFNS mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ], [cat <<_LT_EOF >> "$ofile" dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded dnl in a comment (ie after a #). # ### BEGIN LIBTOOL TAG CONFIG: $1 _LT_LIBTOOL_TAG_VARS(_LT_TAG) # ### END LIBTOOL TAG CONFIG: $1 _LT_EOF ])dnl /m4_if ], [m4_if([$1], [], [ PACKAGE='$PACKAGE' VERSION='$VERSION' TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile'], []) ])dnl /_LT_CONFIG_SAVE_COMMANDS ])# _LT_CONFIG # LT_SUPPORTED_TAG(TAG) # --------------------- # Trace this macro to discover what tags are supported by the libtool # --tag option, using: # autoconf --trace 'LT_SUPPORTED_TAG:$1' AC_DEFUN([LT_SUPPORTED_TAG], []) # C support is built-in for now m4_define([_LT_LANG_C_enabled], []) m4_define([_LT_TAGS], []) # LT_LANG(LANG) # ------------- # Enable libtool support for the given language if not already enabled. AC_DEFUN([LT_LANG], [AC_BEFORE([$0], [LT_OUTPUT])dnl m4_case([$1], [C], [_LT_LANG(C)], [C++], [_LT_LANG(CXX)], [Go], [_LT_LANG(GO)], [Java], [_LT_LANG(GCJ)], [Fortran 77], [_LT_LANG(F77)], [Fortran], [_LT_LANG(FC)], [Windows Resource], [_LT_LANG(RC)], [m4_ifdef([_LT_LANG_]$1[_CONFIG], [_LT_LANG($1)], [m4_fatal([$0: unsupported language: "$1"])])])dnl ])# LT_LANG # _LT_LANG(LANGNAME) # ------------------ m4_defun([_LT_LANG], [m4_ifdef([_LT_LANG_]$1[_enabled], [], [LT_SUPPORTED_TAG([$1])dnl m4_append([_LT_TAGS], [$1 ])dnl m4_define([_LT_LANG_]$1[_enabled], [])dnl _LT_LANG_$1_CONFIG($1)])dnl ])# _LT_LANG m4_ifndef([AC_PROG_GO], [ # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_GO. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # m4_defun([AC_PROG_GO], [AC_LANG_PUSH(Go)dnl AC_ARG_VAR([GOC], [Go compiler command])dnl AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl _AC_ARG_VAR_LDFLAGS()dnl AC_CHECK_TOOL(GOC, gccgo) if test -z "$GOC"; then if test -n "$ac_tool_prefix"; then AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) fi fi if test -z "$GOC"; then AC_CHECK_PROG(GOC, gccgo, gccgo, false) fi ])#m4_defun ])#m4_ifndef # _LT_LANG_DEFAULT_CONFIG # ----------------------- m4_defun([_LT_LANG_DEFAULT_CONFIG], [AC_PROVIDE_IFELSE([AC_PROG_CXX], [LT_LANG(CXX)], [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) AC_PROVIDE_IFELSE([AC_PROG_F77], [LT_LANG(F77)], [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) AC_PROVIDE_IFELSE([AC_PROG_FC], [LT_LANG(FC)], [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal dnl pulling things in needlessly. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([LT_PROG_GCJ], [LT_LANG(GCJ)], [m4_ifdef([AC_PROG_GCJ], [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([A][M_PROG_GCJ], [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([LT_PROG_GCJ], [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) AC_PROVIDE_IFELSE([AC_PROG_GO], [LT_LANG(GO)], [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) AC_PROVIDE_IFELSE([LT_PROG_RC], [LT_LANG(RC)], [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) ])# _LT_LANG_DEFAULT_CONFIG # Obsolete macros: AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_CXX], []) dnl AC_DEFUN([AC_LIBTOOL_F77], []) dnl AC_DEFUN([AC_LIBTOOL_FC], []) dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) dnl AC_DEFUN([AC_LIBTOOL_RC], []) # _LT_TAG_COMPILER # ---------------- m4_defun([_LT_TAG_COMPILER], [AC_REQUIRE([AC_PROG_CC])dnl _LT_DECL([LTCC], [CC], [1], [A C compiler])dnl _LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl _LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl _LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC ])# _LT_TAG_COMPILER # _LT_COMPILER_BOILERPLATE # ------------------------ # Check for compiler boilerplate output or warnings with # the simple compiler test code. m4_defun([_LT_COMPILER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ])# _LT_COMPILER_BOILERPLATE # _LT_LINKER_BOILERPLATE # ---------------------- # Check for linker boilerplate output or warnings with # the simple link test code. m4_defun([_LT_LINKER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ])# _LT_LINKER_BOILERPLATE # _LT_REQUIRED_DARWIN_CHECKS # ------------------------- m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ case $host_os in rhapsody* | darwin*) AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) AC_CHECK_TOOL([LIPO], [lipo], [:]) AC_CHECK_TOOL([OTOOL], [otool], [:]) AC_CHECK_TOOL([OTOOL64], [otool64], [:]) _LT_DECL([], [DSYMUTIL], [1], [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) _LT_DECL([], [NMEDIT], [1], [Tool to change global to local symbols on Mac OS X]) _LT_DECL([], [LIPO], [1], [Tool to manipulate fat objects and archives on Mac OS X]) _LT_DECL([], [OTOOL], [1], [ldd/readelf like tool for Mach-O binaries on Mac OS X]) _LT_DECL([], [OTOOL64], [1], [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], [lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? # If there is a non-empty error log, and "single_module" # appears in it, assume the flag caused a linker warning if test -s conftest.err && $GREP single_module conftest.err; then cat conftest.err >&AS_MESSAGE_LOG_FD # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. elif test -f libconftest.dylib && test $_lt_result -eq 0; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&AS_MESSAGE_LOG_FD fi rm -rf libconftest.dylib* rm -f conftest.* fi]) AC_CACHE_CHECK([for -exported_symbols_list linker flag], [lt_cv_ld_exported_symbols_list], [lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [lt_cv_ld_exported_symbols_list=yes], [lt_cv_ld_exported_symbols_list=no]) LDFLAGS="$save_LDFLAGS" ]) AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], [lt_cv_ld_force_load=no cat > conftest.c << _LT_EOF int forced_loaded() { return 2;} _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD cat > conftest.c << _LT_EOF int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&AS_MESSAGE_LOG_FD elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then lt_cv_ld_force_load=yes else cat conftest.err >&AS_MESSAGE_LOG_FD fi rm -f conftest.err libconftest.a conftest conftest.c rm -rf conftest.dSYM ]) case $host_os in rhapsody* | darwin1.[[012]]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[[012]]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac ]) # _LT_DARWIN_LINKER_FEATURES([TAG]) # --------------------------------- # Checks for linker and compiler features on darwin m4_defun([_LT_DARWIN_LINKER_FEATURES], [ m4_require([_LT_REQUIRED_DARWIN_CHECKS]) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported if test "$lt_cv_ld_force_load" = "yes"; then _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) else _LT_TAGVAR(whole_archive_flag_spec, $1)='' fi _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" m4_if([$1], [CXX], [ if test "$lt_cv_apple_cc_single_mod" != "yes"; then _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" fi ],[]) else _LT_TAGVAR(ld_shlibs, $1)=no fi ]) # _LT_SYS_MODULE_PATH_AIX([TAGNAME]) # ---------------------------------- # Links a minimal program and checks the executable # for the system default hardcoded library path. In most cases, # this is /usr/lib:/lib, but when the MPI compilers are used # the location of the communication and MPI libs are included too. # If we don't find anything, use the default library path according # to the aix ld manual. # Store the results from the different compilers for each TAGNAME. # Allow to override them for all tags through lt_cv_aix_libpath. m4_defun([_LT_SYS_MODULE_PATH_AIX], [m4_require([_LT_DECL_SED])dnl if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ lt_aix_libpath_sed='[ /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }]' _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi],[]) if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" fi ]) aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) fi ])# _LT_SYS_MODULE_PATH_AIX # _LT_SHELL_INIT(ARG) # ------------------- m4_define([_LT_SHELL_INIT], [m4_divert_text([M4SH-INIT], [$1 ])])# _LT_SHELL_INIT # _LT_PROG_ECHO_BACKSLASH # ----------------------- # Find how we can fake an echo command that does not interpret backslash. # In particular, with Autoconf 2.60 or later we add some code to the start # of the generated configure script which will find a shell with a builtin # printf (which we can use as an echo command). m4_defun([_LT_PROG_ECHO_BACKSLASH], [ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO AC_MSG_CHECKING([how to print strings]) # Test print first, because it will be a builtin if present. if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='print -r --' elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='printf %s\n' else # Use this function as a fallback that always works. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $[]1 _LTECHO_EOF' } ECHO='func_fallback_echo' fi # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "$*" } case "$ECHO" in printf*) AC_MSG_RESULT([printf]) ;; print*) AC_MSG_RESULT([print -r]) ;; *) AC_MSG_RESULT([cat]) ;; esac m4_ifdef([_AS_DETECT_SUGGESTED], [_AS_DETECT_SUGGESTED([ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test "X`printf %s $ECHO`" = "X$ECHO" \ || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) _LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) ])# _LT_PROG_ECHO_BACKSLASH # _LT_WITH_SYSROOT # ---------------- AC_DEFUN([_LT_WITH_SYSROOT], [AC_MSG_CHECKING([for sysroot]) AC_ARG_WITH([sysroot], [ --with-sysroot[=DIR] Search for dependent libraries within DIR (or the compiler's sysroot if not specified).], [], [with_sysroot=no]) dnl lt_sysroot will always be passed unquoted. We quote it here dnl in case the user passed a directory name. lt_sysroot= case ${with_sysroot} in #( yes) if test "$GCC" = yes; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( *) AC_MSG_RESULT([${with_sysroot}]) AC_MSG_ERROR([The sysroot must be an absolute path.]) ;; esac AC_MSG_RESULT([${lt_sysroot:-no}]) _LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl [dependent libraries, and in which our libraries should be installed.])]) # _LT_ENABLE_LOCK # --------------- m4_defun([_LT_ENABLE_LOCK], [AC_ARG_ENABLE([libtool-lock], [AS_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) case `/usr/bin/file conftest.o` in *x86-64*) LD="${LD-ld} -m elf32_x86_64" ;; *) LD="${LD-ld} -m elf_i386" ;; esac ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_PUSH(C) AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_POP]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; *-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) case $host in i?86-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) LD="${LD-ld} -m elf64_sparc" ;; esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then LD="${LD-ld}_sol2" fi ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" ])# _LT_ENABLE_LOCK # _LT_PROG_AR # ----------- m4_defun([_LT_PROG_AR], [AC_CHECK_TOOLS(AR, [ar], false) : ${AR=ar} : ${AR_FLAGS=cru} _LT_DECL([], [AR], [1], [The archiver]) _LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], [lt_cv_ar_at_file=no AC_COMPILE_IFELSE([AC_LANG_PROGRAM], [echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' AC_TRY_EVAL([lt_ar_try]) if test "$ac_status" -eq 0; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a AC_TRY_EVAL([lt_ar_try]) if test "$ac_status" -ne 0; then lt_cv_ar_at_file=@ fi fi rm -f conftest.* libconftest.a ]) ]) if test "x$lt_cv_ar_at_file" = xno; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file fi _LT_DECL([], [archiver_list_spec], [1], [How to feed a file listing to the archiver]) ])# _LT_PROG_AR # _LT_CMD_OLD_ARCHIVE # ------------------- m4_defun([_LT_CMD_OLD_ARCHIVE], [_LT_PROG_AR AC_CHECK_TOOL(STRIP, strip, :) test -z "$STRIP" && STRIP=: _LT_DECL([], [STRIP], [1], [A symbol stripping program]) AC_CHECK_TOOL(RANLIB, ranlib, :) test -z "$RANLIB" && RANLIB=: _LT_DECL([], [RANLIB], [1], [Commands used to install an old-style archive]) # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" fi case $host_os in darwin*) lock_old_archive_extraction=yes ;; *) lock_old_archive_extraction=no ;; esac _LT_DECL([], [old_postinstall_cmds], [2]) _LT_DECL([], [old_postuninstall_cmds], [2]) _LT_TAGDECL([], [old_archive_cmds], [2], [Commands used to build an old-style archive]) _LT_DECL([], [lock_old_archive_extraction], [0], [Whether to use a lock for old archive extraction]) ])# _LT_CMD_OLD_ARCHIVE # _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------------------- # Check whether the given compiler option works AC_DEFUN([_LT_COMPILER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$3" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi fi $RM conftest* ]) if test x"[$]$2" = xyes; then m4_if([$5], , :, [$5]) else m4_if([$6], , :, [$6]) fi ])# _LT_COMPILER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) # _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------- # Check whether the given linker option works AC_DEFUN([_LT_LINKER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $3" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi else $2=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" ]) if test x"[$]$2" = xyes; then m4_if([$4], , :, [$4]) else m4_if([$5], , :, [$5]) fi ])# _LT_LINKER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) # LT_CMD_MAX_LEN #--------------- AC_DEFUN([LT_CMD_MAX_LEN], [AC_REQUIRE([AC_CANONICAL_HOST])dnl # find the maximum length of command line arguments AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; mint*) # On MiNT this can take a long time and run out of memory. lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; os2*) # The test takes a long time on OS/2. lt_cv_sys_max_cmd_len=8192 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len" && \ test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8 ; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac ]) if test -n $lt_cv_sys_max_cmd_len ; then AC_MSG_RESULT($lt_cv_sys_max_cmd_len) else AC_MSG_RESULT(none) fi max_cmd_len=$lt_cv_sys_max_cmd_len _LT_DECL([], [max_cmd_len], [0], [What is the maximum length of a command?]) ])# LT_CMD_MAX_LEN # Old name: AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) # _LT_HEADER_DLFCN # ---------------- m4_defun([_LT_HEADER_DLFCN], [AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl ])# _LT_HEADER_DLFCN # _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) # ---------------------------------------------------------------- m4_defun([_LT_TRY_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test "$cross_compiling" = yes; then : [$4] else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF [#line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; }] _LT_EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; x$lt_dlneed_uscore) $2 ;; x$lt_dlunknown|x*) $3 ;; esac else : # compilation failed $3 fi fi rm -fr conftest* ])# _LT_TRY_DLOPEN_SELF # LT_SYS_DLOPEN_SELF # ------------------ AC_DEFUN([LT_SYS_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ]) ;; *) AC_CHECK_FUNC([shl_load], [lt_cv_dlopen="shl_load"], [AC_CHECK_LIB([dld], [shl_load], [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], [AC_CHECK_FUNC([dlopen], [lt_cv_dlopen="dlopen"], [AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [AC_CHECK_LIB([svld], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], [AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) ]) ]) ]) ]) ]) ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" AC_CACHE_CHECK([whether a program can dlopen itself], lt_cv_dlopen_self, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ]) fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi _LT_DECL([dlopen_support], [enable_dlopen], [0], [Whether dlopen is supported]) _LT_DECL([dlopen_self], [enable_dlopen_self], [0], [Whether dlopen of programs is supported]) _LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], [Whether dlopen of statically linked programs is supported]) ])# LT_SYS_DLOPEN_SELF # Old name: AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) # _LT_COMPILER_C_O([TAGNAME]) # --------------------------- # Check to see if options -c and -o are simultaneously supported by compiler. # This macro does not hard code the compiler like AC_PROG_CC_C_O. m4_defun([_LT_COMPILER_C_O], [m4_require([_LT_DECL_SED])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi chmod u+w . 2>&AS_MESSAGE_LOG_FD $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* ]) _LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], [Does compiler simultaneously support -c and -o options?]) ])# _LT_COMPILER_C_O # _LT_COMPILER_FILE_LOCKS([TAGNAME]) # ---------------------------------- # Check to see if we can do hard links to lock some files if needed m4_defun([_LT_COMPILER_FILE_LOCKS], [m4_require([_LT_ENABLE_LOCK])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_COMPILER_C_O([$1]) hard_links="nottested" if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no AC_MSG_RESULT([$hard_links]) if test "$hard_links" = no; then AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) need_locks=warn fi else need_locks=no fi _LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) ])# _LT_COMPILER_FILE_LOCKS # _LT_CHECK_OBJDIR # ---------------- m4_defun([_LT_CHECK_OBJDIR], [AC_CACHE_CHECK([for objdir], [lt_cv_objdir], [rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null]) objdir=$lt_cv_objdir _LT_DECL([], [objdir], [0], [The name of the directory that contains temporary libtool files])dnl m4_pattern_allow([LT_OBJDIR])dnl AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", [Define to the sub-directory in which libtool stores uninstalled libraries.]) ])# _LT_CHECK_OBJDIR # _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) # -------------------------------------- # Check hardcoding attributes. m4_defun([_LT_LINKER_HARDCODE_LIBPATH], [AC_MSG_CHECKING([how to hardcode library paths into programs]) _LT_TAGVAR(hardcode_action, $1)= if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || test -n "$_LT_TAGVAR(runpath_var, $1)" || test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then # We can hardcode non-existent directories. if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then # Linking always hardcodes the temporary library directory. _LT_TAGVAR(hardcode_action, $1)=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. _LT_TAGVAR(hardcode_action, $1)=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. _LT_TAGVAR(hardcode_action, $1)=unsupported fi AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi _LT_TAGDECL([], [hardcode_action], [0], [How to hardcode a shared library path into an executable]) ])# _LT_LINKER_HARDCODE_LIBPATH # _LT_CMD_STRIPLIB # ---------------- m4_defun([_LT_CMD_STRIPLIB], [m4_require([_LT_DECL_EGREP]) striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" AC_MSG_RESULT([yes]) else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi ;; *) AC_MSG_RESULT([no]) ;; esac fi _LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) _LT_DECL([], [striplib], [1]) ])# _LT_CMD_STRIPLIB # _LT_SYS_DYNAMIC_LINKER([TAG]) # ----------------------------- # PORTME Fill in your ld.so characteristics m4_defun([_LT_SYS_DYNAMIC_LINKER], [AC_REQUIRE([AC_CANONICAL_HOST])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_OBJDUMP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl AC_MSG_CHECKING([dynamic linker characteristics]) m4_if([$1], [], [ if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac case $host_os in mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; *) lt_sed_strip_eq="s,=/,/,g" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` ;; *) lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` ;; esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[[lt_foo]]++; } if (lt_freq[[lt_foo]] == 1) { print lt_foo; } }'` # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi]) library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[[4-9]]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[[01]] | aix4.[[01]].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[[45]]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' library_names_spec='${libname}.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec="$LIB" if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[[23]].*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[[01]]* | freebsdelf3.[[01]]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=yes sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[[3-9]]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], [lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], [lt_cv_shlibpath_overrides_runpath=yes])]) LDFLAGS=$save_LDFLAGS libdir=$save_libdir ]) shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[[89]] | openbsd2.[[89]].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac AC_MSG_RESULT([$dynamic_linker]) test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi _LT_DECL([], [variables_saved_for_relink], [1], [Variables whose values should be saved in libtool wrapper scripts and restored at link time]) _LT_DECL([], [need_lib_prefix], [0], [Do we need the "lib" prefix for modules?]) _LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) _LT_DECL([], [version_type], [0], [Library versioning type]) _LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) _LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) _LT_DECL([], [shlibpath_overrides_runpath], [0], [Is shlibpath searched before the hard-coded library search path?]) _LT_DECL([], [libname_spec], [1], [Format of library name prefix]) _LT_DECL([], [library_names_spec], [1], [[List of archive names. First name is the real one, the rest are links. The last name is the one that the linker finds with -lNAME]]) _LT_DECL([], [soname_spec], [1], [[The coded name of the library, if different from the real name]]) _LT_DECL([], [install_override_mode], [1], [Permission mode override for installation of shared libraries]) _LT_DECL([], [postinstall_cmds], [2], [Command to use after installation of a shared archive]) _LT_DECL([], [postuninstall_cmds], [2], [Command to use after uninstallation of a shared archive]) _LT_DECL([], [finish_cmds], [2], [Commands used to finish a libtool library installation in a directory]) _LT_DECL([], [finish_eval], [1], [[As "finish_cmds", except a single script fragment to be evaled but not shown]]) _LT_DECL([], [hardcode_into_libs], [0], [Whether we should hardcode library paths into libraries]) _LT_DECL([], [sys_lib_search_path_spec], [2], [Compile-time system search path for libraries]) _LT_DECL([], [sys_lib_dlsearch_path_spec], [2], [Run-time system search path for libraries]) ])# _LT_SYS_DYNAMIC_LINKER # _LT_PATH_TOOL_PREFIX(TOOL) # -------------------------- # find a file program which can recognize shared library AC_DEFUN([_LT_PATH_TOOL_PREFIX], [m4_require([_LT_DECL_EGREP])dnl AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in [[\\/*] | ?:[\\/]*]) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="m4_if([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$1; then lt_cv_path_MAGIC_CMD="$ac_dir/$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac]) MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi _LT_DECL([], [MAGIC_CMD], [0], [Used to examine libraries when file_magic_cmd begins with "file"])dnl ])# _LT_PATH_TOOL_PREFIX # Old name: AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) # _LT_PATH_MAGIC # -------------- # find a file program which can recognize a shared library m4_defun([_LT_PATH_MAGIC], [_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) else MAGIC_CMD=: fi fi ])# _LT_PATH_MAGIC # LT_PATH_LD # ---------- # find the pathname to the GNU or non-GNU linker AC_DEFUN([LT_PATH_LD], [AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_PROG_ECHO_BACKSLASH])dnl AC_ARG_WITH([gnu-ld], [AS_HELP_STRING([--with-gnu-ld], [assume the C compiler uses GNU ld @<:@default=no@:>@])], [test "$withval" = no || with_gnu_ld=yes], [with_gnu_ld=no])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]]* | ?:[[\\/]]*) re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc*) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; haiku*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[[3-9]]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; esac ]) file_magic_glob= want_nocaseglob=no if test "$build" = "$host"; then case $host_os in mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` fi ;; esac fi file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown _LT_DECL([], [deplibs_check_method], [1], [Method to check whether dependent libraries are shared objects]) _LT_DECL([], [file_magic_cmd], [1], [Command to use when deplibs_check_method = "file_magic"]) _LT_DECL([], [file_magic_glob], [1], [How to find potential files when deplibs_check_method = "file_magic"]) _LT_DECL([], [want_nocaseglob], [1], [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) ])# _LT_CHECK_MAGIC_METHOD # LT_PATH_NM # ---------- # find the pathname to a BSD- or MS-compatible name lister AC_DEFUN([LT_PATH_NM], [AC_REQUIRE([AC_PROG_CC])dnl AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done : ${lt_cv_path_NM=no} fi]) if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols" ;; *) DUMPBIN=: ;; esac fi AC_SUBST([DUMPBIN]) if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" fi fi test -z "$NM" && NM=nm AC_SUBST([NM]) _LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], [lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) cat conftest.out >&AS_MESSAGE_LOG_FD if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest*]) ])# LT_PATH_NM # Old names: AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_PROG_NM], []) dnl AC_DEFUN([AC_PROG_NM], []) # _LT_CHECK_SHAREDLIB_FROM_LINKLIB # -------------------------------- # how to determine the name of the shared library # associated with a specific link library. # -- PORTME fill in with the dynamic library characteristics m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], [m4_require([_LT_DECL_EGREP]) m4_require([_LT_DECL_OBJDUMP]) m4_require([_LT_DECL_DLLTOOL]) AC_CACHE_CHECK([how to associate runtime and link libraries], lt_cv_sharedlib_from_linklib_cmd, [lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh # decide which to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; esac ;; *) # fallback: assume linklib IS sharedlib lt_cv_sharedlib_from_linklib_cmd="$ECHO" ;; esac ]) sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO _LT_DECL([], [sharedlib_from_linklib_cmd], [1], [Command to associate shared and link libraries]) ])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB # _LT_PATH_MANIFEST_TOOL # ---------------------- # locate the manifest tool m4_defun([_LT_PATH_MANIFEST_TOOL], [AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], [lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&AS_MESSAGE_LOG_FD if $GREP 'Manifest Tool' conftest.out > /dev/null; then lt_cv_path_mainfest_tool=yes fi rm -f conftest*]) if test "x$lt_cv_path_mainfest_tool" != xyes; then MANIFEST_TOOL=: fi _LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl ])# _LT_PATH_MANIFEST_TOOL # LT_LIB_M # -------- # check for math library AC_DEFUN([LT_LIB_M], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, cos, LIBM="-lm") ;; esac AC_SUBST([LIBM]) ])# LT_LIB_M # Old name: AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_CHECK_LIBM], []) # _LT_COMPILER_NO_RTTI([TAGNAME]) # ------------------------------- m4_defun([_LT_COMPILER_NO_RTTI], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= if test "$GCC" = yes; then case $cc_basename in nvcc*) _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; *) _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; esac _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], lt_cv_prog_compiler_rtti_exceptions, [-fno-rtti -fno-exceptions], [], [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) fi _LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], [Compiler flag to turn off builtin functions]) ])# _LT_COMPILER_NO_RTTI # _LT_CMD_GLOBAL_SYMBOLS # ---------------------- m4_defun([_LT_CMD_GLOBAL_SYMBOLS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([LT_PATH_NM])dnl AC_REQUIRE([LT_PATH_LD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_TAG_COMPILER])dnl # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output from $compiler object]) AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [ # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[[BCDEGRST]]' # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[[BCDT]]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[[ABCDGISTW]]' ;; hpux*) if test "$host_cpu" = ia64; then symcode='[[ABCDEGRST]]' fi ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; osf*) symcode='[[BCDEGQRST]]' ;; solaris*) symcode='[[BDRT]]' ;; sco3.2v5*) symcode='[[DT]]' ;; sysv4.2uw2*) symcode='[[DT]]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[[ABDT]]' ;; sysv4) symcode='[[DFNSTU]]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[[ABCDGIRSTW]]' ;; esac # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function # and D for any global variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK ['"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ " {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ " s[1]~/^[@?]/{print s[1], s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx]" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if AC_TRY_EVAL(ac_compile); then # Now try to grab the symbols. nlist=conftest.nm if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT@&t@_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT@&t@_DLSYM_CONST #else # define LT@&t@_DLSYM_CONST const #endif #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ LT@&t@_DLSYM_CONST struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[[]] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD fi else echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done ]) if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then AC_MSG_RESULT(failed) else AC_MSG_RESULT(ok) fi # Response file support. if test "$lt_cv_nm_interface" = "MS dumpbin"; then nm_file_list_spec='@' elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then nm_file_list_spec='@' fi _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], [Take the output of nm and produce a listing of raw symbols and C names]) _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], [Transform the output of nm in a proper C declaration]) _LT_DECL([global_symbol_to_c_name_address], [lt_cv_sys_global_symbol_to_c_name_address], [1], [Transform the output of nm in a C name address pair]) _LT_DECL([global_symbol_to_c_name_address_lib_prefix], [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], [Transform the output of nm in a C name address pair when lib prefix is needed]) _LT_DECL([], [nm_file_list_spec], [1], [Specify filename containing input files for $NM]) ]) # _LT_CMD_GLOBAL_SYMBOLS # _LT_COMPILER_PIC([TAGNAME]) # --------------------------- m4_defun([_LT_COMPILER_PIC], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_wl, $1)= _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)= m4_if([$1], [CXX], [ # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. _LT_TAGVAR(lt_prog_compiler_static, $1)= ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else case $host_os in aix[[4-9]]*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; dgux*) case $cc_basename in ec++*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; ghcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; aCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # KAI C++ Compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; ecpc* ) # old Intel C++ for x86_64 which still supported -KPIC. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; icpc* ) # Intel C++, used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL 8.0, 9.0 on PPC and BlueGene _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ;; *) ;; esac ;; netbsd* | netbsdelf*-gnu) ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; cxx*) # Digital/Compaq C++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; lcc*) # Lucid _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; *) ;; esac ;; vxworks*) ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ], [ if test "$GCC" = yes; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. _LT_TAGVAR(lt_prog_compiler_static, $1)= ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac case $cc_basename in nvcc*) # Cuda Compiler Driver 2.2 _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" fi ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; hpux9* | hpux10* | hpux11*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC (with -KPIC) is the default. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # Lahey Fortran 8.1. lf95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' ;; nagfor*) # NAG Fortran compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; ccc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All Alpha code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xl* | bgxl* | bgf* | mpixl*) # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) # Sun Fortran 8.3 passes all unrecognized flags to the linker _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='' ;; *Sun\ F* | *Sun*Fortran*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; *Intel*\ [[CF]]*Compiler*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; *Portland\ Group*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; esac ;; newsos6) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All OSF/1 code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; rdos*) _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; solaris*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' case $cc_basename in f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; *) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; esac ;; sunos4*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; unicos*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; uts4*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ]) case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" ;; esac AC_CACHE_CHECK([for $compiler option to produce PIC], [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) _LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) # # Check to make sure the PIC flag actually works. # if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in "" | " "*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; esac], [_LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) fi _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], [Additional compiler flags for building library objects]) _LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], [How to pass a linker flag through the compiler]) # # Check to make sure the static flag actually works. # wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" _LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), $lt_tmp_static_flag, [], [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) _LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], [Compiler flag to prevent dynamic linking]) ])# _LT_COMPILER_PIC # _LT_LINKER_SHLIBS([TAGNAME]) # ---------------------------- # See if the linker supports building shared libraries. m4_defun([_LT_LINKER_SHLIBS], [AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl m4_require([_LT_PATH_MANIFEST_TOOL])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) m4_if([$1], [CXX], [ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] case $host_os in aix[[4-9]]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global defined # symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ;; cygwin* | mingw* | cegcc*) case $cc_basename in cl*) _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] ;; esac ;; linux* | k*bsd*-gnu | gnu*) _LT_TAGVAR(link_all_deplibs, $1)=no ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac ], [ runpath_var= _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_cmds, $1)= _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(old_archive_from_new_cmds, $1)= _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= _LT_TAGVAR(thread_safe_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list _LT_TAGVAR(include_expsyms, $1)= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. dnl Note also adjust exclude_expsyms for C++ above. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) _LT_TAGVAR(link_all_deplibs, $1)=no ;; esac _LT_TAGVAR(ld_shlibs, $1)=yes # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility # with the native linker. However, as the warning in the GNU ld # block says, versions before 2.19.5* couldn't really create working # shared libraries, regardless of the interface used. case `$LD -v 2>&1` in *\ \(GNU\ Binutils\)\ 2.19.5*) ;; *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; *) lt_use_gnu_ld_interface=yes ;; esac ;; *) lt_use_gnu_ld_interface=yes ;; esac fi if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi supports_anon_versioning=no case `$LD -v 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[[3-9]]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to install binutils *** 2.20 or above, or modify your PATH so that a non-GNU linker is found. *** You will then need to restart the configuration process. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 _LT_TAGVAR(whole_archive_flag_spec, $1)= tmp_sharedflag='--shared' ;; xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi case $cc_basename in xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; sunos4*) _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then runpath_var= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. _LT_TAGVAR(hardcode_minus_L, $1)=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. _LT_TAGVAR(hardcode_direct, $1)=unsupported fi ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi _LT_TAGVAR(link_all_deplibs, $1)=no else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; bsdi[[45]]*) _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in cl*) # Native MSVC _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(file_list_spec, $1)='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # Assume MSVC wrapper _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' # FIXME: Should let the user specify the lib program. _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; esac ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; dgux*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2.*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; hpux9*) if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; hpux10*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes fi ;; hpux11*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) m4_if($1, [], [ # Older versions of the 11.00 compiler do not understand -b yet # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) _LT_LINKER_OPTION([if $CC understands -b], _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) ;; esac fi if test "$with_gnu_ld" = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], [lt_cv_irix_exported_symbol], [save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" AC_LINK_IFELSE( [AC_LANG_SOURCE( [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], [C++], [[int foo (void) { return 0; }]], [Fortran 77], [[ subroutine foo end]], [Fortran], [[ subroutine foo end]])])], [lt_cv_irix_exported_symbol=yes], [lt_cv_irix_exported_symbol=no]) LDFLAGS="$save_LDFLAGS"]) if test "$lt_cv_irix_exported_symbol" = yes; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' fi else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes _LT_TAGVAR(link_all_deplibs, $1)=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; newsos6) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' else case $host_os in openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ;; esac fi else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; os2*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; solaris*) _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='${wl}' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' fi ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4) case $host_vendor in sni) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' _LT_TAGVAR(hardcode_direct, $1)=no ;; motorola) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4.3*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes _LT_TAGVAR(ld_shlibs, $1)=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(ld_shlibs, $1)=no ;; esac if test x$host_vendor = xsni; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' ;; esac fi fi ]) AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld _LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl _LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl _LT_DECL([], [extract_expsyms_cmds], [2], [The commands to extract the exported symbol list from a shared archive]) # # Do we need to explicitly link libc? # case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in x|xyes) # Assume -lc should be added _LT_TAGVAR(archive_cmds_need_lc, $1)=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $_LT_TAGVAR(archive_cmds, $1) in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. AC_CACHE_CHECK([whether -lc should be explicitly linked in], [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), [$RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if AC_TRY_EVAL(ac_compile) 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) _LT_TAGVAR(allow_undefined_flag, $1)= if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) then lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no else lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes fi _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* ]) _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) ;; esac fi ;; esac _LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], [Whether or not to add -lc for building shared libraries]) _LT_TAGDECL([allow_libtool_libs_with_static_runtimes], [enable_shared_with_static_runtimes], [0], [Whether or not to disallow shared libs when runtime libs are static]) _LT_TAGDECL([], [export_dynamic_flag_spec], [1], [Compiler flag to allow reflexive dlopens]) _LT_TAGDECL([], [whole_archive_flag_spec], [1], [Compiler flag to generate shared objects directly from archives]) _LT_TAGDECL([], [compiler_needs_object], [1], [Whether the compiler copes with passing no objects directly]) _LT_TAGDECL([], [old_archive_from_new_cmds], [2], [Create an old-style archive from a shared archive]) _LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], [Create a temporary old-style archive to link instead of a shared archive]) _LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) _LT_TAGDECL([], [archive_expsym_cmds], [2]) _LT_TAGDECL([], [module_cmds], [2], [Commands used to build a loadable module if different from building a shared archive.]) _LT_TAGDECL([], [module_expsym_cmds], [2]) _LT_TAGDECL([], [with_gnu_ld], [1], [Whether we are building with GNU ld or not]) _LT_TAGDECL([], [allow_undefined_flag], [1], [Flag that allows shared libraries with undefined symbols to be built]) _LT_TAGDECL([], [no_undefined_flag], [1], [Flag that enforces no undefined symbols]) _LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], [Flag to hardcode $libdir into a binary during linking. This must work even if $libdir does not exist]) _LT_TAGDECL([], [hardcode_libdir_separator], [1], [Whether we need a single "-rpath" flag with a separated argument]) _LT_TAGDECL([], [hardcode_direct], [0], [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_direct_absolute], [0], [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the resulting binary and the resulting library dependency is "absolute", i.e impossible to change by setting ${shlibpath_var} if the library is relocated]) _LT_TAGDECL([], [hardcode_minus_L], [0], [Set to "yes" if using the -LDIR flag during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_shlibpath_var], [0], [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_automatic], [0], [Set to "yes" if building a shared library automatically hardcodes DIR into the library and all subsequent libraries and executables linked against it]) _LT_TAGDECL([], [inherit_rpath], [0], [Set to yes if linker adds runtime paths of dependent libraries to runtime path list]) _LT_TAGDECL([], [link_all_deplibs], [0], [Whether libtool must link a program against all its dependency libraries]) _LT_TAGDECL([], [always_export_symbols], [0], [Set to "yes" if exported symbols are required]) _LT_TAGDECL([], [export_symbols_cmds], [2], [The commands to list exported symbols]) _LT_TAGDECL([], [exclude_expsyms], [1], [Symbols that should not be listed in the preloaded symbols]) _LT_TAGDECL([], [include_expsyms], [1], [Symbols that must always be exported]) _LT_TAGDECL([], [prelink_cmds], [2], [Commands necessary for linking programs (against libraries) with templates]) _LT_TAGDECL([], [postlink_cmds], [2], [Commands necessary for finishing linking programs]) _LT_TAGDECL([], [file_list_spec], [1], [Specify filename containing input files]) dnl FIXME: Not yet implemented dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], dnl [Compiler flag to generate thread safe objects]) ])# _LT_LINKER_SHLIBS # _LT_LANG_C_CONFIG([TAG]) # ------------------------ # Ensure that the configuration variables for a C compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to `libtool'. m4_defun([_LT_LANG_C_CONFIG], [m4_require([_LT_DECL_EGREP])dnl lt_save_CC="$CC" AC_LANG_PUSH(C) # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' _LT_TAG_COMPILER # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) LT_SYS_DLOPEN_SELF _LT_CMD_STRIPLIB # Report which library types will actually be built AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_CONFIG($1) fi AC_LANG_POP CC="$lt_save_CC" ])# _LT_LANG_C_CONFIG # _LT_LANG_CXX_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a C++ compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to `libtool'. m4_defun([_LT_LANG_CXX_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_PATH_MANIFEST_TOOL])dnl if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then AC_PROG_CXXCPP else _lt_caught_CXX_error=yes fi AC_LANG_PUSH(C++) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_caught_CXX_error" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} CFLAGS=$CXXFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' else _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration LT_PATH_LD # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) _LT_TAGVAR(ld_shlibs, $1)=yes case $host_os in aix3*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' if test "$GXX" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. _LT_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty # executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared # libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; cygwin* | mingw* | pw32* | cegcc*) case $GXX,$cc_basename in ,cl* | no,cl*) # Native MSVC # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(file_list_spec, $1)='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ func_to_tool_file "$lt_outputfile"~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # g++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; freebsd2.*) # C++ shared libraries reported to be fairly broken before # switch to ELF _LT_TAGVAR(ld_shlibs, $1)=no ;; freebsd-elf*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_TAGVAR(ld_shlibs, $1)=yes ;; haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; hpux9*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) ;; *) _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' fi fi _LT_TAGVAR(link_all_deplibs, $1)=yes ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc* | ecpc* ) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ $RANLIB $oldlib' _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; *) # Version 6 and above use weak symbols _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' ;; xl* | mpixl* | bgxl*) # IBM XL 8.0 on PPC, with GNU ld _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; m88k*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; *nto* | *qnx*) _LT_TAGVAR(ld_shlibs, $1)=yes ;; openbsd2*) # C++ shared libraries are fairly broken _LT_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd=func_echo_all else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # the KAI C++ compiler. case $host in osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; esac ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; cxx*) case $host in osf3*) _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ;; *) _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ $RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ;; esac _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' case $host in osf3*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ '"$_LT_TAGVAR(old_archive_cmds, $1)" _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ '"$_LT_TAGVAR(reload_cmds, $1)" ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_TAGVAR(GCC, $1)="$GXX" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld fi # test "$_lt_caught_CXX_error" != yes AC_LANG_POP ])# _LT_LANG_CXX_CONFIG # _LT_FUNC_STRIPNAME_CNF # ---------------------- # func_stripname_cnf prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # # This function is identical to the (non-XSI) version of func_stripname, # except this one can be used by m4 code that may be executed by configure, # rather than the libtool script. m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl AC_REQUIRE([_LT_DECL_SED]) AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) func_stripname_cnf () { case ${2} in .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac } # func_stripname_cnf ])# _LT_FUNC_STRIPNAME_CNF # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) # --------------------------------- # Figure out "hidden" library dependencies from verbose # compiler output when linking a shared library. # Parse the compiler output and extract the necessary # objects, libraries and library flags. m4_defun([_LT_SYS_HIDDEN_LIBDEPS], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl # Dependencies to place before and after the object being linked: _LT_TAGVAR(predep_objects, $1)= _LT_TAGVAR(postdep_objects, $1)= _LT_TAGVAR(predeps, $1)= _LT_TAGVAR(postdeps, $1)= _LT_TAGVAR(compiler_lib_search_path, $1)= dnl we can't use the lt_simple_compile_test_code here, dnl because it contains code intended for an executable, dnl not a library. It's possible we should let each dnl tag define a new lt_????_link_test_code variable, dnl but it's only used here... m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF int a; void foo (void) { a = 0; } _LT_EOF ], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF class Foo { public: Foo (void) { a = 0; } private: int a; }; _LT_EOF ], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer*4 a a=0 return end _LT_EOF ], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer a a=0 return end _LT_EOF ], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF public class foo { private int a; public void bar (void) { a = 0; } }; _LT_EOF ], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF package foo func foo() { } _LT_EOF ]) _lt_libdeps_save_CFLAGS=$CFLAGS case "$CC $CFLAGS " in #( *\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; *\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; *\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; esac dnl Parse the compiler output and extract the necessary dnl objects, libraries and library flags. if AC_TRY_EVAL(ac_compile); then # Parse the compiler output and extract the necessary # objects, libraries and library flags. # Sentinel used to keep track of whether or not we are before # the conftest object file. pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do case ${prev}${p} in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. if test $p = "-L" || test $p = "-R"; then prev=$p continue fi # Expand the sysroot to ease extracting the directories later. if test -z "$prev"; then case $p in -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; esac fi case $p in =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; esac if test "$pre_test_object_deps_done" = no; then case ${prev} in -L | -R) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" else _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" fi ;; # The "-l" case would never come before the object being # linked, so don't bother handling this case. esac else if test -z "$_LT_TAGVAR(postdeps, $1)"; then _LT_TAGVAR(postdeps, $1)="${prev}${p}" else _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" fi fi prev= ;; *.lto.$objext) ;; # Ignore GCC LTO objects *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then pre_test_object_deps_done=yes continue fi if test "$pre_test_object_deps_done" = no; then if test -z "$_LT_TAGVAR(predep_objects, $1)"; then _LT_TAGVAR(predep_objects, $1)="$p" else _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" fi else if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then _LT_TAGVAR(postdep_objects, $1)="$p" else _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" fi fi ;; *) ;; # Ignore the rest. esac done # Clean up. rm -f a.out a.exe else echo "libtool.m4: error: problem compiling $1 test program" fi $RM -f confest.$objext CFLAGS=$_lt_libdeps_save_CFLAGS # PORTME: override above test on systems where it is broken m4_if([$1], [CXX], [case $host_os in interix[[3-9]]*) # Interix 3.5 installs completely hosed .la files for C++, so rather than # hack all around it, let's just trust "g++" to DTRT. _LT_TAGVAR(predep_objects,$1)= _LT_TAGVAR(postdep_objects,$1)= _LT_TAGVAR(postdeps,$1)= ;; linux*) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac if test "$solaris_use_stlport4" != yes; then _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac # Adding this requires a known-good setup of shared libraries for # Sun compiler versions before 5.6, else PIC objects from an old # archive will be linked into the output, leading to subtle bugs. if test "$solaris_use_stlport4" != yes; then _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; esac ]) case " $_LT_TAGVAR(postdeps, $1) " in *" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; esac _LT_TAGVAR(compiler_lib_search_dirs, $1)= if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` fi _LT_TAGDECL([], [compiler_lib_search_dirs], [1], [The directories searched by this compiler when creating a shared library]) _LT_TAGDECL([], [predep_objects], [1], [Dependencies to place before and after the objects being linked to create a shared library]) _LT_TAGDECL([], [postdep_objects], [1]) _LT_TAGDECL([], [predeps], [1]) _LT_TAGDECL([], [postdeps], [1]) _LT_TAGDECL([], [compiler_lib_search_path], [1], [The library search path used internally by the compiler when linking a shared library]) ])# _LT_SYS_HIDDEN_LIBDEPS # _LT_LANG_F77_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a Fortran 77 compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_F77_CONFIG], [AC_LANG_PUSH(Fortran 77) if test -z "$F77" || test "X$F77" = "Xno"; then _lt_disable_F77=yes fi _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for f77 test sources. ac_ext=f # Object file extension for compiled f77 test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the F77 compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_disable_F77" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${F77-"f77"} CFLAGS=$FFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) GCC=$G77 if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)="$G77" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC="$lt_save_CC" CFLAGS="$lt_save_CFLAGS" fi # test "$_lt_disable_F77" != yes AC_LANG_POP ])# _LT_LANG_F77_CONFIG # _LT_LANG_FC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for a Fortran compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_FC_CONFIG], [AC_LANG_PUSH(Fortran) if test -z "$FC" || test "X$FC" = "Xno"; then _lt_disable_FC=yes fi _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for fc test sources. ac_ext=${ac_fc_srcext-f} # Object file extension for compiled fc test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the FC compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_disable_FC" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${FC-"f95"} CFLAGS=$FCFLAGS compiler=$CC GCC=$ac_cv_fc_compiler_gnu _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS fi # test "$_lt_disable_FC" != yes AC_LANG_POP ])# _LT_LANG_FC_CONFIG # _LT_LANG_GCJ_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for the GNU Java Compiler compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_GCJ_CONFIG], [AC_REQUIRE([LT_PROG_GCJ])dnl AC_LANG_SAVE # Source file extension for Java test sources. ac_ext=java # Object file extension for compiled Java test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="class foo {}" # Code to be used in simple link tests lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC=yes CC=${GCJ-"gcj"} CFLAGS=$GCJFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_TAGVAR(LD, $1)="$LD" _LT_CC_BASENAME([$compiler]) # GCJ did not exist at the time GCC didn't implicitly link libc in. _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi AC_LANG_RESTORE GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_GCJ_CONFIG # _LT_LANG_GO_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for the GNU Go compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_GO_CONFIG], [AC_REQUIRE([LT_PROG_GO])dnl AC_LANG_SAVE # Source file extension for Go test sources. ac_ext=go # Object file extension for compiled Go test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="package main; func main() { }" # Code to be used in simple link tests lt_simple_link_test_code='package main; func main() { }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC=yes CC=${GOC-"gccgo"} CFLAGS=$GOFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_TAGVAR(LD, $1)="$LD" _LT_CC_BASENAME([$compiler]) # Go did not exist at the time GCC didn't implicitly link libc in. _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi AC_LANG_RESTORE GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_GO_CONFIG # _LT_LANG_RC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for the Windows resource compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_RC_CONFIG], [AC_REQUIRE([LT_PROG_RC])dnl AC_LANG_SAVE # Source file extension for RC test sources. ac_ext=rc # Object file extension for compiled RC test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' # Code to be used in simple link tests lt_simple_link_test_code="$lt_simple_compile_test_code" # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC= CC=${RC-"windres"} CFLAGS= compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes if test -n "$compiler"; then : _LT_CONFIG($1) fi GCC=$lt_save_GCC AC_LANG_RESTORE CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_RC_CONFIG # LT_PROG_GCJ # ----------- AC_DEFUN([LT_PROG_GCJ], [m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj,) test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS)])])[]dnl ]) # Old name: AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_GCJ], []) # LT_PROG_GO # ---------- AC_DEFUN([LT_PROG_GO], [AC_CHECK_TOOL(GOC, gccgo,) ]) # LT_PROG_RC # ---------- AC_DEFUN([LT_PROG_RC], [AC_CHECK_TOOL(RC, windres,) ]) # Old name: AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_RC], []) # _LT_DECL_EGREP # -------------- # If we don't have a new enough Autoconf to choose the best grep # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_EGREP], [AC_REQUIRE([AC_PROG_EGREP])dnl AC_REQUIRE([AC_PROG_FGREP])dnl test -z "$GREP" && GREP=grep _LT_DECL([], [GREP], [1], [A grep program that handles long lines]) _LT_DECL([], [EGREP], [1], [An ERE matcher]) _LT_DECL([], [FGREP], [1], [A literal string matcher]) dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too AC_SUBST([GREP]) ]) # _LT_DECL_OBJDUMP # -------------- # If we don't have a new enough Autoconf to choose the best objdump # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_OBJDUMP], [AC_CHECK_TOOL(OBJDUMP, objdump, false) test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) AC_SUBST([OBJDUMP]) ]) # _LT_DECL_DLLTOOL # ---------------- # Ensure DLLTOOL variable is set. m4_defun([_LT_DECL_DLLTOOL], [AC_CHECK_TOOL(DLLTOOL, dlltool, false) test -z "$DLLTOOL" && DLLTOOL=dlltool _LT_DECL([], [DLLTOOL], [1], [DLL creation program]) AC_SUBST([DLLTOOL]) ]) # _LT_DECL_SED # ------------ # Check for a fully-functional sed program, that truncates # as few characters as possible. Prefer GNU sed if found. m4_defun([_LT_DECL_SED], [AC_PROG_SED test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" _LT_DECL([], [SED], [1], [A sed program that does not truncate output]) _LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], [Sed that helps us avoid accidentally triggering echo(1) options like -n]) ])# _LT_DECL_SED m4_ifndef([AC_PROG_SED], [ # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_SED. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # m4_defun([AC_PROG_SED], [AC_MSG_CHECKING([for a sed that does not truncate output]) AC_CACHE_VAL(lt_cv_path_SED, [# Loop through the user's path and test for sed and gsed. # Then use that list of sed's as ones to test for truncation. as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for lt_ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" fi done done done IFS=$as_save_IFS lt_ac_max=0 lt_ac_count=0 # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do test ! -f $lt_ac_sed && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in # Check for GNU sed and select it if it is found. if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then lt_cv_path_SED=$lt_ac_sed break fi while true; do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo >>conftest.nl $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break cmp -s conftest.out conftest.nl || break # 10000 chars as input seems more than enough test $lt_ac_count -gt 10 && break lt_ac_count=`expr $lt_ac_count + 1` if test $lt_ac_count -gt $lt_ac_max; then lt_ac_max=$lt_ac_count lt_cv_path_SED=$lt_ac_sed fi done done ]) SED=$lt_cv_path_SED AC_SUBST([SED]) AC_MSG_RESULT([$SED]) ])#AC_PROG_SED ])#m4_ifndef # Old name: AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_SED], []) # _LT_CHECK_SHELL_FEATURES # ------------------------ # Find out whether the shell is Bourne or XSI compatible, # or has some other useful features. m4_defun([_LT_CHECK_SHELL_FEATURES], [AC_MSG_CHECKING([whether the shell understands some XSI constructs]) # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ = c,a/b,b/c, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes AC_MSG_RESULT([$xsi_shell]) _LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) AC_MSG_CHECKING([whether the shell understands "+="]) lt_shell_append=no ( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes AC_MSG_RESULT([$lt_shell_append]) _LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi _LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac _LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl ])# _LT_CHECK_SHELL_FEATURES # _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) # ------------------------------------------------------ # In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and # '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. m4_defun([_LT_PROG_FUNCTION_REPLACE], [dnl { sed -e '/^$1 ()$/,/^} # $1 /c\ $1 ()\ {\ m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) } # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: ]) # _LT_PROG_REPLACE_SHELLFNS # ------------------------- # Replace existing portable implementations of several shell functions with # equivalent extended shell implementations where those features are available.. m4_defun([_LT_PROG_REPLACE_SHELLFNS], [if test x"$xsi_shell" = xyes; then _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac]) _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl func_basename_result="${1##*/}"]) _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac func_basename_result="${1##*/}"]) _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are # positional parameters, so assign one to ordinary parameter first. func_stripname_result=${3} func_stripname_result=${func_stripname_result#"${1}"} func_stripname_result=${func_stripname_result%"${2}"}]) _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl func_split_long_opt_name=${1%%=*} func_split_long_opt_arg=${1#*=}]) _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl func_split_short_opt_arg=${1#??} func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl case ${1} in *.lo) func_lo2o_result=${1%.lo}.${objext} ;; *) func_lo2o_result=${1} ;; esac]) _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) fi if test x"$lt_shell_append" = xyes; then _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl func_quote_for_eval "${2}" dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) # Save a `func_append' function call where possible by direct use of '+=' sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: else # Save a `func_append' function call even when '+=' is not available sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$_lt_function_replace_fail" = x":"; then AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) fi ]) # _LT_PATH_CONVERSION_FUNCTIONS # ----------------------------- # Determine which file name conversion functions should be used by # func_to_host_file (and, implicitly, by func_to_host_path). These are needed # for certain cross-compile configurations and native mingw. m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_MSG_CHECKING([how to convert $build file names to $host format]) AC_CACHE_VAL(lt_cv_to_host_file_cmd, [case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ;; esac ;; *-*-cygwin* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_noop ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ;; esac ;; * ) # unhandled hosts (and "normal" native builds) lt_cv_to_host_file_cmd=func_convert_file_noop ;; esac ]) to_host_file_cmd=$lt_cv_to_host_file_cmd AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) _LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], [0], [convert $build file names to $host format])dnl AC_MSG_CHECKING([how to convert $build file names to toolchain format]) AC_CACHE_VAL(lt_cv_to_tool_file_cmd, [#assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac ;; esac ]) to_tool_file_cmd=$lt_cv_to_tool_file_cmd AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) _LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], [0], [convert $build files to toolchain format])dnl ])# _LT_PATH_CONVERSION_FUNCTIONS # Helper functions for option handling. -*- Autoconf -*- # # Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, # Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 7 ltoptions.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) # _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) # ------------------------------------------ m4_define([_LT_MANGLE_OPTION], [[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) # _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) # --------------------------------------- # Set option OPTION-NAME for macro MACRO-NAME, and if there is a # matching handler defined, dispatch to it. Other OPTION-NAMEs are # saved as a flag. m4_define([_LT_SET_OPTION], [m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), _LT_MANGLE_DEFUN([$1], [$2]), [m4_warning([Unknown $1 option `$2'])])[]dnl ]) # _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) # ------------------------------------------------------------ # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. m4_define([_LT_IF_OPTION], [m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) # _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) # ------------------------------------------------------- # Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME # are set. m4_define([_LT_UNLESS_OPTIONS], [m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), [m4_define([$0_found])])])[]dnl m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 ])[]dnl ]) # _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) # ---------------------------------------- # OPTION-LIST is a space-separated list of Libtool options associated # with MACRO-NAME. If any OPTION has a matching handler declared with # LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about # the unknown option and exit. m4_defun([_LT_SET_OPTIONS], [# Set options m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [_LT_SET_OPTION([$1], _LT_Option)]) m4_if([$1],[LT_INIT],[ dnl dnl Simply set some default values (i.e off) if boolean options were not dnl specified: _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no ]) _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no ]) dnl dnl If no reference was made to various pairs of opposing options, then dnl we run the default mode handler for the pair. For example, if neither dnl `shared' nor `disable-shared' was passed, we enable building of shared dnl archives by default: _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], [_LT_ENABLE_FAST_INSTALL]) ]) ])# _LT_SET_OPTIONS # _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) # ----------------------------------------- m4_define([_LT_MANGLE_DEFUN], [[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) # LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) # ----------------------------------------------- m4_define([LT_OPTION_DEFINE], [m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl ])# LT_OPTION_DEFINE # dlopen # ------ LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes ]) AU_DEFUN([AC_LIBTOOL_DLOPEN], [_LT_SET_OPTION([LT_INIT], [dlopen]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `dlopen' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) # win32-dll # --------- # Declare package support for building win32 dll's. LT_OPTION_DEFINE([LT_INIT], [win32-dll], [enable_win32_dll=yes case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) ;; esac test -z "$AS" && AS=as _LT_DECL([], [AS], [1], [Assembler program])dnl test -z "$DLLTOOL" && DLLTOOL=dlltool _LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl ])# win32-dll AU_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_REQUIRE([AC_CANONICAL_HOST])dnl _LT_SET_OPTION([LT_INIT], [win32-dll]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `win32-dll' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) # _LT_ENABLE_SHARED([DEFAULT]) # ---------------------------- # implement the --enable-shared flag, and supports the `shared' and # `disable-shared' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_SHARED], [m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([shared], [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) _LT_DECL([build_libtool_libs], [enable_shared], [0], [Whether or not to build shared libraries]) ])# _LT_ENABLE_SHARED LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) # Old names: AC_DEFUN([AC_ENABLE_SHARED], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) ]) AC_DEFUN([AC_DISABLE_SHARED], [_LT_SET_OPTION([LT_INIT], [disable-shared]) ]) AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_SHARED], []) dnl AC_DEFUN([AM_DISABLE_SHARED], []) # _LT_ENABLE_STATIC([DEFAULT]) # ---------------------------- # implement the --enable-static flag, and support the `static' and # `disable-static' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_STATIC], [m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([static], [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_static=]_LT_ENABLE_STATIC_DEFAULT) _LT_DECL([build_old_libs], [enable_static], [0], [Whether or not to build static libraries]) ])# _LT_ENABLE_STATIC LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) # Old names: AC_DEFUN([AC_ENABLE_STATIC], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) ]) AC_DEFUN([AC_DISABLE_STATIC], [_LT_SET_OPTION([LT_INIT], [disable-static]) ]) AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_STATIC], []) dnl AC_DEFUN([AM_DISABLE_STATIC], []) # _LT_ENABLE_FAST_INSTALL([DEFAULT]) # ---------------------------------- # implement the --enable-fast-install flag, and support the `fast-install' # and `disable-fast-install' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_FAST_INSTALL], [m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([fast-install], [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) _LT_DECL([fast_install], [enable_fast_install], [0], [Whether or not to optimize for fast installation])dnl ])# _LT_ENABLE_FAST_INSTALL LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) # Old names: AU_DEFUN([AC_ENABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `fast-install' option into LT_INIT's first parameter.]) ]) AU_DEFUN([AC_DISABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], [disable-fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `disable-fast-install' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) # _LT_WITH_PIC([MODE]) # -------------------- # implement the --with-pic flag, and support the `pic-only' and `no-pic' # LT_INIT options. # MODE is either `yes' or `no'. If omitted, it defaults to `both'. m4_define([_LT_WITH_PIC], [AC_ARG_WITH([pic], [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], [lt_p=${PACKAGE-default} case $withval in yes|no) pic_mode=$withval ;; *) pic_mode=default # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for lt_pkg in $withval; do IFS="$lt_save_ifs" if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done IFS="$lt_save_ifs" ;; esac], [pic_mode=default]) test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) _LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl ])# _LT_WITH_PIC LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) # Old name: AU_DEFUN([AC_LIBTOOL_PICMODE], [_LT_SET_OPTION([LT_INIT], [pic-only]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `pic-only' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) m4_define([_LTDL_MODE], []) LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], [m4_define([_LTDL_MODE], [nonrecursive])]) LT_OPTION_DEFINE([LTDL_INIT], [recursive], [m4_define([_LTDL_MODE], [recursive])]) LT_OPTION_DEFINE([LTDL_INIT], [subproject], [m4_define([_LTDL_MODE], [subproject])]) m4_define([_LTDL_TYPE], []) LT_OPTION_DEFINE([LTDL_INIT], [installable], [m4_define([_LTDL_TYPE], [installable])]) LT_OPTION_DEFINE([LTDL_INIT], [convenience], [m4_define([_LTDL_TYPE], [convenience])]) # ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- # # Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 6 ltsugar.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) # lt_join(SEP, ARG1, [ARG2...]) # ----------------------------- # Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their # associated separator. # Needed until we can rely on m4_join from Autoconf 2.62, since all earlier # versions in m4sugar had bugs. m4_define([lt_join], [m4_if([$#], [1], [], [$#], [2], [[$2]], [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) m4_define([_lt_join], [m4_if([$#$2], [2], [], [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) # lt_car(LIST) # lt_cdr(LIST) # ------------ # Manipulate m4 lists. # These macros are necessary as long as will still need to support # Autoconf-2.59 which quotes differently. m4_define([lt_car], [[$1]]) m4_define([lt_cdr], [m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], [$#], 1, [], [m4_dquote(m4_shift($@))])]) m4_define([lt_unquote], $1) # lt_append(MACRO-NAME, STRING, [SEPARATOR]) # ------------------------------------------ # Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. # Note that neither SEPARATOR nor STRING are expanded; they are appended # to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). # No SEPARATOR is output if MACRO-NAME was previously undefined (different # than defined and empty). # # This macro is needed until we can rely on Autoconf 2.62, since earlier # versions of m4sugar mistakenly expanded SEPARATOR but not STRING. m4_define([lt_append], [m4_define([$1], m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) # lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) # ---------------------------------------------------------- # Produce a SEP delimited list of all paired combinations of elements of # PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list # has the form PREFIXmINFIXSUFFIXn. # Needed until we can rely on m4_combine added in Autoconf 2.62. m4_define([lt_combine], [m4_if(m4_eval([$# > 3]), [1], [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl [[m4_foreach([_Lt_prefix], [$2], [m4_foreach([_Lt_suffix], ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) # lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) # ----------------------------------------------------------------------- # Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited # by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. m4_define([lt_if_append_uniq], [m4_ifdef([$1], [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], [lt_append([$1], [$2], [$3])$4], [$5])], [lt_append([$1], [$2], [$3])$4])]) # lt_dict_add(DICT, KEY, VALUE) # ----------------------------- m4_define([lt_dict_add], [m4_define([$1($2)], [$3])]) # lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) # -------------------------------------------- m4_define([lt_dict_add_subkey], [m4_define([$1($2:$3)], [$4])]) # lt_dict_fetch(DICT, KEY, [SUBKEY]) # ---------------------------------- m4_define([lt_dict_fetch], [m4_ifval([$3], m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) # lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) # ----------------------------------------------------------------- m4_define([lt_if_dict_fetch], [m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], [$5], [$6])]) # lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) # -------------------------------------------------------------- m4_define([lt_dict_filter], [m4_if([$5], [], [], [lt_join(m4_quote(m4_default([$4], [[, ]])), lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl ]) # ltversion.m4 -- version numbers -*- Autoconf -*- # # Copyright (C) 2004 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # @configure_input@ # serial 3337 ltversion.m4 # This file is part of GNU Libtool m4_define([LT_PACKAGE_VERSION], [2.4.2]) m4_define([LT_PACKAGE_REVISION], [1.3337]) AC_DEFUN([LTVERSION_VERSION], [macro_version='2.4.2' macro_revision='1.3337' _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) _LT_DECL(, macro_revision, 0) ]) # lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- # # Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004. # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 5 lt~obsolete.m4 # These exist entirely to fool aclocal when bootstrapping libtool. # # In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) # which have later been changed to m4_define as they aren't part of the # exported API, or moved to Autoconf or Automake where they belong. # # The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN # in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us # using a macro with the same name in our local m4/libtool.m4 it'll # pull the old libtool.m4 in (it doesn't see our shiny new m4_define # and doesn't know about Autoconf macros at all.) # # So we provide this file, which has a silly filename so it's always # included after everything else. This provides aclocal with the # AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything # because those macros already exist, or will be overwritten later. # We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. # # Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. # Yes, that means every name once taken will need to remain here until # we give up compatibility with versions before 1.7, at which point # we need to keep only those names which we still refer to. # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) # nls.m4 serial 5 (gettext-0.18) dnl Copyright (C) 1995-2003, 2005-2006, 2008-2013 Free Software Foundation, dnl Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl dnl This file can can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: dnl Ulrich Drepper , 1995-2000. dnl Bruno Haible , 2000-2003. AC_PREREQ([2.50]) AC_DEFUN([AM_NLS], [ AC_MSG_CHECKING([whether NLS is requested]) dnl Default is enabled NLS AC_ARG_ENABLE([nls], [ --disable-nls do not use Native Language Support], USE_NLS=$enableval, USE_NLS=yes) AC_MSG_RESULT([$USE_NLS]) AC_SUBST([USE_NLS]) ]) # pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- # serial 1 (pkg-config-0.24) # # Copyright © 2004 Scott James Remnant . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # PKG_PROG_PKG_CONFIG([MIN-VERSION]) # ---------------------------------- AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) fi if test -n "$PKG_CONFIG"; then _pkg_min_version=m4_default([$1], [0.9.0]) AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) PKG_CONFIG="" fi fi[]dnl ])# PKG_PROG_PKG_CONFIG # PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) # # Check to see whether a particular set of modules exists. Similar # to PKG_CHECK_MODULES(), but does not set variables or print errors. # # Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) # only at the first occurence in configure.ac, so if the first place # it's called might be skipped (such as if it is within an "if", you # have to call PKG_CHECK_EXISTS manually # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl if test -n "$PKG_CONFIG" && \ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then m4_default([$2], [:]) m4_ifvaln([$3], [else $3])dnl fi]) # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) # --------------------------------------------- m4_define([_PKG_CONFIG], [if test -n "$$1"; then pkg_cv_[]$1="$$1" elif test -n "$PKG_CONFIG"; then PKG_CHECK_EXISTS([$3], [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes ], [pkg_failed=yes]) else pkg_failed=untried fi[]dnl ])# _PKG_CONFIG # _PKG_SHORT_ERRORS_SUPPORTED # ----------------------------- AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi[]dnl ])# _PKG_SHORT_ERRORS_SUPPORTED # PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], # [ACTION-IF-NOT-FOUND]) # # # Note that if there is a possibility the first call to # PKG_CHECK_MODULES might not happen, you should be sure to include an # explicit call to PKG_PROG_PKG_CONFIG in your configure.ac # # # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl pkg_failed=no AC_MSG_CHECKING([for $1]) _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) _PKG_CONFIG([$1][_LIBS], [libs], [$2]) m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS and $1[]_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.]) if test $pkg_failed = yes; then AC_MSG_RESULT([no]) _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` else $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD m4_default([$4], [AC_MSG_ERROR( [Package requirements ($2) were not met: $$1_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. _PKG_TEXT])[]dnl ]) elif test $pkg_failed = untried; then AC_MSG_RESULT([no]) m4_default([$4], [AC_MSG_FAILURE( [The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. _PKG_TEXT To get pkg-config, see .])[]dnl ]) else $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS $1[]_LIBS=$pkg_cv_[]$1[]_LIBS AC_MSG_RESULT([yes]) $3 fi[]dnl ])# PKG_CHECK_MODULES # Copyright (C) 2002-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.14' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.14], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.14])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to # '$srcdir', '$srcdir/..', or '$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is '.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ([2.52])dnl m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], [$1], [CXX], [depcc="$CXX" am_compiler_list=], [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], [$1], [UPC], [depcc="$UPC" am_compiler_list=], [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi am__universal=false m4_case([$1], [CC], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac], [CXX], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac]) for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES. AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE([dependency-tracking], [dnl AS_HELP_STRING( [--enable-dependency-tracking], [do not reject slow dependency extractors]) AS_HELP_STRING( [--disable-dependency-tracking], [speeds up one-time build])]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl AC_SUBST([am__nodep])dnl _AM_SUBST_NOTMAKE([am__nodep])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each '.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC]) [_AM_PROG_CC_C_O ]) # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.65])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [AC_DIAGNOSE([obsolete], [$0: two- and three-arguments forms are deprecated.]) m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if( m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), [ok:ok],, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) AM_MISSING_PROG([AUTOCONF], [autoconf]) AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) AM_MISSING_PROG([AUTOHEADER], [autoheader]) AM_MISSING_PROG([MAKEINFO], [makeinfo]) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # AC_SUBST([mkdir_p], ['$(MKDIR_P)']) # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES([CC])], [m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES([CXX])], [m4_define([AC_PROG_CXX], m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES([OBJC])], [m4_define([AC_PROG_OBJC], m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], [_AM_DEPENDENCIES([OBJCXX])], [m4_define([AC_PROG_OBJCXX], m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl ]) AC_REQUIRE([AM_SILENT_RULES])dnl dnl The testsuite driver may need to know about EXEEXT, so add the dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl # POSIX will say in a future version that running "rm -f" with no argument # is OK; and we want to be able to make that assumption in our Makefile # recipes. So use an aggressive probe to check that the usage we want is # actually supported "in the wild" to an acceptable degree. # See automake bug#10828. # To make any issue more visible, cause the running configure to be aborted # by default if the 'rm' program in use doesn't match our expectations; the # user can still override this though. if rm -f && rm -fr && rm -rf; then : OK; else cat >&2 <<'END' Oops! Your 'rm' program seems unable to run without file operands specified on the command line, even when the '-f' option is present. This is contrary to the behaviour of most rm programs out there, and not conforming with the upcoming POSIX standard: Please tell bug-automake@gnu.org about your system, including the value of your $PATH and any error possibly output before this message. This can help us improve future automake versions. END if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then echo 'Configuration will proceed anyway, since you have set the' >&2 echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 echo >&2 else cat >&2 <<'END' Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation that behaves properly: . If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM to "yes", and re-run configure. END AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) fi fi]) dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST([install_sh])]) # Copyright (C) 2003-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- # From Jim Meyering # Copyright (C) 1996-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MAINTAINER_MODE([DEFAULT-MODE]) # ---------------------------------- # Control maintainer-specific portions of Makefiles. # Default is to disable them, unless 'enable' is passed literally. # For symmetry, 'disable' may be passed as well. Anyway, the user # can override the default with the --enable/--disable switch. AC_DEFUN([AM_MAINTAINER_MODE], [m4_case(m4_default([$1], [disable]), [enable], [m4_define([am_maintainer_other], [disable])], [disable], [m4_define([am_maintainer_other], [enable])], [m4_define([am_maintainer_other], [enable]) m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode's default is 'disable' unless 'enable' is passed AC_ARG_ENABLE([maintainer-mode], [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], am_maintainer_other[ make rules and dependencies not useful (and sometimes confusing) to the casual installer])], [USE_MAINTAINER_MODE=$enableval], [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) AC_MSG_RESULT([$USE_MAINTAINER_MODE]) AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) MAINT=$MAINTAINER_MODE_TRUE AC_SUBST([MAINT])dnl ] ) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it is modern enough. # If it is, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= AC_MSG_WARN(['missing' script is too old or missing]) fi ]) # -*- Autoconf -*- # Obsolete and "removed" macros, that must however still report explicit # error messages when used, to smooth transition. # # Copyright (C) 1996-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. AC_DEFUN([AM_CONFIG_HEADER], [AC_DIAGNOSE([obsolete], ['$0': this macro is obsolete. You should use the 'AC][_CONFIG_HEADERS' macro instead.])dnl AC_CONFIG_HEADERS($@)]) AC_DEFUN([AM_PROG_CC_STDC], [AC_PROG_CC am_cv_prog_cc_stdc=$ac_cv_prog_cc_stdc AC_DIAGNOSE([obsolete], ['$0': this macro is obsolete. You should simply use the 'AC][_PROG_CC' macro instead. Also, your code should no longer depend upon 'am_cv_prog_cc_stdc', but upon 'ac_cv_prog_cc_stdc'.])]) AC_DEFUN([AM_C_PROTOTYPES], [AC_FATAL([automatic de-ANSI-fication support has been removed])]) AU_DEFUN([fp_C_PROTOTYPES], [AM_C_PROTOTYPES]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # -------------------- # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), [1])]) # _AM_SET_OPTIONS(OPTIONS) # ------------------------ # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Copyright (C) 1999-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_CC_C_O # --------------- # Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC # to automatically call this. AC_DEFUN([_AM_PROG_CC_C_O], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([compile])dnl AC_LANG_PUSH([C])dnl AC_CACHE_CHECK( [whether $CC understands -c and -o together], [am_cv_prog_cc_c_o], [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i]) if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi AC_LANG_POP([C])]) # For backward compatibility. AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_RUN_LOG(COMMAND) # ------------------- # Run COMMAND, save the exit status in ac_status, and log it. # (This has been adapted from Autoconf's _AC_RUN_LOG macro.) AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD (exit $ac_status); }]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi if test "$[2]" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT([yes]) # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi AC_CONFIG_COMMANDS_PRE( [AC_MSG_CHECKING([that generated files are newer than configure]) if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi AC_MSG_RESULT([done])]) rm -f conftest.file ]) # Copyright (C) 2009-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SILENT_RULES([DEFAULT]) # -------------------------- # Enable less verbose build rules; with the default set to DEFAULT # ("yes" being less verbose, "no" or empty being verbose). AC_DEFUN([AM_SILENT_RULES], [AC_ARG_ENABLE([silent-rules], [dnl AS_HELP_STRING( [--enable-silent-rules], [less verbose build output (undo: "make V=1")]) AS_HELP_STRING( [--disable-silent-rules], [verbose build output (undo: "make V=0")])dnl ]) case $enable_silent_rules in @%:@ ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; esac dnl dnl A few 'make' implementations (e.g., NonStop OS and NextStep) dnl do not support nested variable expansions. dnl See automake bug#9928 and bug#10237. am_make=${MAKE-make} AC_CACHE_CHECK([whether $am_make supports nested variables], [am_cv_make_support_nested_variables], [if AS_ECHO([['TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi]) if test $am_cv_make_support_nested_variables = yes; then dnl Using '$V' instead of '$(V)' breaks IRIX make. AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AC_SUBST([AM_V])dnl AM_SUBST_NOTMAKE([AM_V])dnl AC_SUBST([AM_DEFAULT_V])dnl AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl AC_SUBST([AM_DEFAULT_VERBOSITY])dnl AM_BACKSLASH='\' AC_SUBST([AM_BACKSLASH])dnl _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ]) # Copyright (C) 2001-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor 'install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in "make install-strip", and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # -------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004-2013 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of 'v7', 'ustar', or 'pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar # AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AC_SUBST([AMTAR], ['$${TAR-tar}']) # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' m4_if([$1], [v7], [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], [m4_case([$1], [ustar], [# The POSIX 1988 'ustar' format is defined with fixed-size fields. # There is notably a 21 bits limit for the UID and the GID. In fact, # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 # and bug#13588). am_max_uid=2097151 # 2^21 - 1 am_max_gid=$am_max_uid # The $UID and $GID variables are not portable, so we need to resort # to the POSIX-mandated id(1) utility. Errors in the 'id' calls # below are definitely unexpected, so allow the users to see them # (that is, avoid stderr redirection). am_uid=`id -u || echo unknown` am_gid=`id -g || echo unknown` AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) if test $am_uid -le $am_max_uid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) if test $am_gid -le $am_max_gid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi], [pax], [], [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Go ahead even if we have the value already cached. We do so because we # need to set the values for the 'am__tar' and 'am__untar' variables. _am_tools=${am_cv_prog_tar_$1-$_am_tools} for _am_tool in $_am_tools; do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works. rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR gpicview-0.2.4/COPYING0000644000000000000000000004312212231705732011260 00000000000000 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. , 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License. gpicview-0.2.4/src/0000755000000000000000000000000012231706136011071 500000000000000gpicview-0.2.4/src/glib-mem.h0000644000000000000000000000130212231705732012650 00000000000000/* * C++ Interface: glib-mem * * Description: Compatibility macros for older versions of glib * * * Author: Hong Jen Yee (PCMan) , (C) 2006 * * Copyright: See COPYING file that comes with this distribution * */ #ifndef _GLIB_MEM_H_ #define _GLIB_MEM_H_ #include #if ! GLIB_CHECK_VERSION(2, 10, 0) /* older versions of glib don't provde g_slice API */ #define g_slice_alloc(size) g_malloc(size) #define g_slice_alloc0(size) g_malloc0(size) #define g_slice_new(type) g_new(type, 1) #define g_slice_new0(type) g_new0(type, 1) #define g_slice_free(type, mem) g_free(mem) #define g_slice_free1(size, mem) g_free(mem) #endif #endif gpicview-0.2.4/src/tran-supp.c0000644000000000000000000010526612231705732013121 00000000000000/* -*- Mode: C; tab-width: 8; indent-tabs-mode: t; c-basic-offset: 8 -*- */ /* * GThumb * * Copyright (C) 2001, 2002 The Free Software Foundation, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Street #330, Boston, MA 02111-1307, USA. */ /* based upon file transupp.c from the libjpeg package, original copyright * note follows: .* * * transupp.c * * Copyright (C) 1997, Thomas G. Lane. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * * This file contains image transformation routines and other utility code * used by the jpegtran sample application. These are NOT part of the core * JPEG library. But we keep these routines separate from jpegtran.c to * ease the task of maintaining jpegtran-like programs that have other user * interfaces. */ #include #ifdef HAVE_LIBJPEG #define SAVE_MARKERS_SUPPORTED 1 #include #include #include "tran-supp.h" /* My own external interface */ #ifndef MAX #define MAX(a, b) (((a) > (b)) ? (a) : (b)) #endif enum { JERR_CONVERSION_NOTIMPL }; #define ERREXIT(cinfo,code) \ ((cinfo)->err->msg_code = (code), \ (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) static long jround_up (long a, long b) /* Compute a rounded up to next multiple of b, ie, ceil(a/b)*b */ /* Assumes a >= 0, b > 0 */ { a += b - 1L; return a - (a % b); } static void jcopy_block_row (JBLOCKROW input_row, JBLOCKROW output_row, JDIMENSION num_blocks) /* Copy a row of coefficient blocks from one place to another. */ { register JCOEFPTR inptr, outptr; register long count; inptr = (JCOEFPTR) input_row; outptr = (JCOEFPTR) output_row; for (count = (long) num_blocks * DCTSIZE2; count > 0; count--) { *outptr++ = *inptr++; } } /* * Lossless image transformation routines. These routines work on DCT * coefficient arrays and thus do not require any lossy decompression * or recompression of the image. * Thanks to Guido Vollbeding for the initial design and code of this feature. * * Horizontal flipping is done in-place, using a single top-to-bottom * pass through the virtual source array. It will thus be much the * fastest option for images larger than main memory. * * The other routines require a set of destination virtual arrays, so they * need twice as much memory as jpegtran normally does. The destination * arrays are always written in normal scan order (top to bottom) because * the virtual array manager expects this. The source arrays will be scanned * in the corresponding order, which means multiple passes through the source * arrays for most of the transforms. That could result in much thrashing * if the image is larger than main memory. * * Some notes about the operating environment of the individual transform * routines: * 1. Both the source and destination virtual arrays are allocated from the * source JPEG object, and therefore should be manipulated by calling the * source's memory manager. * 2. The destination's component count should be used. It may be smaller * than the source's when forcing to grayscale. * 3. Likewise the destination's sampling factors should be used. When * forcing to grayscale the destination's sampling factors will be all 1, * and we may as well take that as the effective iMCU size. * 4. When "trim" is in effect, the destination's dimensions will be the * trimmed values but the source's will be untrimmed. * 5. All the routines assume that the source and destination buffers are * padded out to a full iMCU boundary. This is true, although for the * source buffer it is an undocumented property of jdcoefct.c. * Notes 2,3,4 boil down to this: generally we should use the destination's * dimensions and ignore the source's. */ static void do_flip_h (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, jvirt_barray_ptr *src_coef_arrays) /* Horizontal flip; done in-place, so no separate dest array is required */ { JDIMENSION MCU_cols, comp_width, blk_x, blk_y; int ci, k, offset_y; JBLOCKARRAY buffer; JCOEFPTR ptr1, ptr2; JCOEF temp1, temp2; jpeg_component_info *compptr; /* Horizontal mirroring of DCT blocks is accomplished by swapping * pairs of blocks in-place. Within a DCT block, we perform horizontal * mirroring by changing the signs of odd-numbered columns. * Partial iMCUs at the right edge are left untouched. */ MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE); for (ci = 0; ci < dstinfo->num_components; ci++) { compptr = dstinfo->comp_info + ci; comp_width = MCU_cols * compptr->h_samp_factor; for (blk_y = 0; blk_y < compptr->height_in_blocks; blk_y += compptr->v_samp_factor) { buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y, (JDIMENSION) compptr->v_samp_factor, TRUE); for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { for (blk_x = 0; blk_x * 2 < comp_width; blk_x++) { ptr1 = buffer[offset_y][blk_x]; ptr2 = buffer[offset_y][comp_width - blk_x - 1]; /* this unrolled loop doesn't need to know which row it's on... */ for (k = 0; k < DCTSIZE2; k += 2) { temp1 = *ptr1; /* swap even column */ temp2 = *ptr2; *ptr1++ = temp2; *ptr2++ = temp1; temp1 = *ptr1; /* swap odd column with sign change */ temp2 = *ptr2; *ptr1++ = -temp2; *ptr2++ = -temp1; } } } } } } static void do_flip_v (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, jvirt_barray_ptr *src_coef_arrays, jvirt_barray_ptr *dst_coef_arrays) /* Vertical flip */ { JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y; int ci, i, j, offset_y; JBLOCKARRAY src_buffer, dst_buffer; JBLOCKROW src_row_ptr, dst_row_ptr; JCOEFPTR src_ptr, dst_ptr; jpeg_component_info *compptr; /* We output into a separate array because we can't touch different * rows of the source virtual array simultaneously. Otherwise, this * is a pretty straightforward analog of horizontal flip. * Within a DCT block, vertical mirroring is done by changing the signs * of odd-numbered rows. * Partial iMCUs at the bottom edge are copied verbatim. */ MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE); for (ci = 0; ci < dstinfo->num_components; ci++) { compptr = dstinfo->comp_info + ci; comp_height = MCU_rows * compptr->v_samp_factor; for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; dst_blk_y += compptr->v_samp_factor) { dst_buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, (JDIMENSION) compptr->v_samp_factor, TRUE); if (dst_blk_y < comp_height) { /* Row is within the mirrorable area. */ src_buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, src_coef_arrays[ci], comp_height - dst_blk_y - (JDIMENSION) compptr->v_samp_factor, (JDIMENSION) compptr->v_samp_factor, FALSE); } else { /* Bottom-edge blocks will be copied verbatim. */ src_buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_y, (JDIMENSION) compptr->v_samp_factor, FALSE); } for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { if (dst_blk_y < comp_height) { /* Row is within the mirrorable area. */ dst_row_ptr = dst_buffer[offset_y]; src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1]; for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { dst_ptr = dst_row_ptr[dst_blk_x]; src_ptr = src_row_ptr[dst_blk_x]; for (i = 0; i < DCTSIZE; i += 2) { /* copy even row */ for (j = 0; j < DCTSIZE; j++) *dst_ptr++ = *src_ptr++; /* copy odd row with sign change */ for (j = 0; j < DCTSIZE; j++) *dst_ptr++ = - *src_ptr++; } } } else { /* Just copy row verbatim. */ jcopy_block_row(src_buffer[offset_y], dst_buffer[offset_y], compptr->width_in_blocks); } } } } } static void do_transpose (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, jvirt_barray_ptr *src_coef_arrays, jvirt_barray_ptr *dst_coef_arrays) /* Transpose source into destination */ { JDIMENSION dst_blk_x, dst_blk_y; int ci, i, j, offset_x, offset_y; JBLOCKARRAY src_buffer, dst_buffer; JCOEFPTR src_ptr, dst_ptr; jpeg_component_info *compptr; /* Transposing pixels within a block just requires transposing the * DCT coefficients. * Partial iMCUs at the edges require no special treatment; we simply * process all the available DCT blocks for every component. */ for (ci = 0; ci < dstinfo->num_components; ci++) { compptr = dstinfo->comp_info + ci; for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; dst_blk_y += compptr->v_samp_factor) { dst_buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, (JDIMENSION) compptr->v_samp_factor, TRUE); for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x += compptr->h_samp_factor) { src_buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x, (JDIMENSION) compptr->h_samp_factor, FALSE); for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { src_ptr = src_buffer[offset_x][dst_blk_y + offset_y]; dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; for (i = 0; i < DCTSIZE; i++) for (j = 0; j < DCTSIZE; j++) dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; } } } } } } static void do_rot_90 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, jvirt_barray_ptr *src_coef_arrays, jvirt_barray_ptr *dst_coef_arrays) /* 90 degree rotation is equivalent to * 1. Transposing the image; * 2. Horizontal mirroring. * These two steps are merged into a single processing routine. */ { JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y; int ci, i, j, offset_x, offset_y; JBLOCKARRAY src_buffer, dst_buffer; JCOEFPTR src_ptr, dst_ptr; jpeg_component_info *compptr; /* Because of the horizontal mirror step, we can't process partial iMCUs * at the (output) right edge properly. They just get transposed and * not mirrored. */ MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE); for (ci = 0; ci < dstinfo->num_components; ci++) { compptr = dstinfo->comp_info + ci; comp_width = MCU_cols * compptr->h_samp_factor; for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; dst_blk_y += compptr->v_samp_factor) { dst_buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, (JDIMENSION) compptr->v_samp_factor, TRUE); for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x += compptr->h_samp_factor) { src_buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x, (JDIMENSION) compptr->h_samp_factor, FALSE); for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { src_ptr = src_buffer[offset_x][dst_blk_y + offset_y]; if (dst_blk_x < comp_width) { /* Block is within the mirrorable area. */ dst_ptr = dst_buffer[offset_y] [comp_width - dst_blk_x - offset_x - 1]; for (i = 0; i < DCTSIZE; i++) { for (j = 0; j < DCTSIZE; j++) dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; i++; for (j = 0; j < DCTSIZE; j++) dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; } } else { /* Edge blocks are transposed but not mirrored. */ dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; for (i = 0; i < DCTSIZE; i++) for (j = 0; j < DCTSIZE; j++) dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; } } } } } } } static void do_rot_270 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, jvirt_barray_ptr *src_coef_arrays, jvirt_barray_ptr *dst_coef_arrays) /* 270 degree rotation is equivalent to * 1. Horizontal mirroring; * 2. Transposing the image. * These two steps are merged into a single processing routine. */ { JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y; int ci, i, j, offset_x, offset_y; JBLOCKARRAY src_buffer, dst_buffer; JCOEFPTR src_ptr, dst_ptr; jpeg_component_info *compptr; /* Because of the horizontal mirror step, we can't process partial iMCUs * at the (output) bottom edge properly. They just get transposed and * not mirrored. */ MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE); for (ci = 0; ci < dstinfo->num_components; ci++) { compptr = dstinfo->comp_info + ci; comp_height = MCU_rows * compptr->v_samp_factor; for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; dst_blk_y += compptr->v_samp_factor) { dst_buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, (JDIMENSION) compptr->v_samp_factor, TRUE); for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x += compptr->h_samp_factor) { src_buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x, (JDIMENSION) compptr->h_samp_factor, FALSE); for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; if (dst_blk_y < comp_height) { /* Block is within the mirrorable area. */ src_ptr = src_buffer[offset_x] [comp_height - dst_blk_y - offset_y - 1]; for (i = 0; i < DCTSIZE; i++) { for (j = 0; j < DCTSIZE; j++) { dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; j++; dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; } } } else { /* Edge blocks are transposed but not mirrored. */ src_ptr = src_buffer[offset_x][dst_blk_y + offset_y]; for (i = 0; i < DCTSIZE; i++) for (j = 0; j < DCTSIZE; j++) dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; } } } } } } } static void do_rot_180 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, jvirt_barray_ptr *src_coef_arrays, jvirt_barray_ptr *dst_coef_arrays) /* 180 degree rotation is equivalent to * 1. Vertical mirroring; * 2. Horizontal mirroring. * These two steps are merged into a single processing routine. */ { JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y; int ci, i, j, offset_y; JBLOCKARRAY src_buffer, dst_buffer; JBLOCKROW src_row_ptr, dst_row_ptr; JCOEFPTR src_ptr, dst_ptr; jpeg_component_info *compptr; MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE); MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE); for (ci = 0; ci < dstinfo->num_components; ci++) { compptr = dstinfo->comp_info + ci; comp_width = MCU_cols * compptr->h_samp_factor; comp_height = MCU_rows * compptr->v_samp_factor; for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; dst_blk_y += compptr->v_samp_factor) { dst_buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, (JDIMENSION) compptr->v_samp_factor, TRUE); if (dst_blk_y < comp_height) { /* Row is within the vertically mirrorable area. */ src_buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, src_coef_arrays[ci], comp_height - dst_blk_y - (JDIMENSION) compptr->v_samp_factor, (JDIMENSION) compptr->v_samp_factor, FALSE); } else { /* Bottom-edge rows are only mirrored horizontally. */ src_buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_y, (JDIMENSION) compptr->v_samp_factor, FALSE); } for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { if (dst_blk_y < comp_height) { /* Row is within the mirrorable area. */ dst_row_ptr = dst_buffer[offset_y]; src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1]; /* Process the blocks that can be mirrored both ways. */ for (dst_blk_x = 0; dst_blk_x < comp_width; dst_blk_x++) { dst_ptr = dst_row_ptr[dst_blk_x]; src_ptr = src_row_ptr[comp_width - dst_blk_x - 1]; for (i = 0; i < DCTSIZE; i += 2) { /* For even row, negate every odd column. */ for (j = 0; j < DCTSIZE; j += 2) { *dst_ptr++ = *src_ptr++; *dst_ptr++ = - *src_ptr++; } /* For odd row, negate every even column. */ for (j = 0; j < DCTSIZE; j += 2) { *dst_ptr++ = - *src_ptr++; *dst_ptr++ = *src_ptr++; } } } /* Any remaining right-edge blocks are only mirrored vertically. */ for (; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { dst_ptr = dst_row_ptr[dst_blk_x]; src_ptr = src_row_ptr[dst_blk_x]; for (i = 0; i < DCTSIZE; i += 2) { for (j = 0; j < DCTSIZE; j++) *dst_ptr++ = *src_ptr++; for (j = 0; j < DCTSIZE; j++) *dst_ptr++ = - *src_ptr++; } } } else { /* Remaining rows are just mirrored horizontally. */ dst_row_ptr = dst_buffer[offset_y]; src_row_ptr = src_buffer[offset_y]; /* Process the blocks that can be mirrored. */ for (dst_blk_x = 0; dst_blk_x < comp_width; dst_blk_x++) { dst_ptr = dst_row_ptr[dst_blk_x]; src_ptr = src_row_ptr[comp_width - dst_blk_x - 1]; for (i = 0; i < DCTSIZE2; i += 2) { *dst_ptr++ = *src_ptr++; *dst_ptr++ = - *src_ptr++; } } /* Any remaining right-edge blocks are only copied. */ for (; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { dst_ptr = dst_row_ptr[dst_blk_x]; src_ptr = src_row_ptr[dst_blk_x]; for (i = 0; i < DCTSIZE2; i++) *dst_ptr++ = *src_ptr++; } } } } } } static void do_transverse (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, jvirt_barray_ptr *src_coef_arrays, jvirt_barray_ptr *dst_coef_arrays) /* Transverse transpose is equivalent to * 1. 180 degree rotation; * 2. Transposition; * or * 1. Horizontal mirroring; * 2. Transposition; * 3. Horizontal mirroring. * These steps are merged into a single processing routine. */ { JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y; int ci, i, j, offset_x, offset_y; JBLOCKARRAY src_buffer, dst_buffer; JCOEFPTR src_ptr, dst_ptr; jpeg_component_info *compptr; MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE); MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE); for (ci = 0; ci < dstinfo->num_components; ci++) { compptr = dstinfo->comp_info + ci; comp_width = MCU_cols * compptr->h_samp_factor; comp_height = MCU_rows * compptr->v_samp_factor; for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; dst_blk_y += compptr->v_samp_factor) { dst_buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, (JDIMENSION) compptr->v_samp_factor, TRUE); for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x += compptr->h_samp_factor) { src_buffer = (*srcinfo->mem->access_virt_barray) ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x, (JDIMENSION) compptr->h_samp_factor, FALSE); for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { if (dst_blk_y < comp_height) { src_ptr = src_buffer[offset_x] [comp_height - dst_blk_y - offset_y - 1]; if (dst_blk_x < comp_width) { /* Block is within the mirrorable area. */ dst_ptr = dst_buffer[offset_y] [comp_width - dst_blk_x - offset_x - 1]; for (i = 0; i < DCTSIZE; i++) { for (j = 0; j < DCTSIZE; j++) { dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; j++; dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; } i++; for (j = 0; j < DCTSIZE; j++) { dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; j++; dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; } } } else { /* Right-edge blocks are mirrored in y only */ dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; for (i = 0; i < DCTSIZE; i++) { for (j = 0; j < DCTSIZE; j++) { dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; j++; dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; } } } } else { src_ptr = src_buffer[offset_x][dst_blk_y + offset_y]; if (dst_blk_x < comp_width) { /* Bottom-edge blocks are mirrored in x only */ dst_ptr = dst_buffer[offset_y] [comp_width - dst_blk_x - offset_x - 1]; for (i = 0; i < DCTSIZE; i++) { for (j = 0; j < DCTSIZE; j++) dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; i++; for (j = 0; j < DCTSIZE; j++) dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; } } else { /* At lower right corner, just transpose, no mirroring */ dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; for (i = 0; i < DCTSIZE; i++) for (j = 0; j < DCTSIZE; j++) dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; } } } } } } } } /* Request any required workspace. * * We allocate the workspace virtual arrays from the source decompression * object, so that all the arrays (both the original data and the workspace) * will be taken into account while making memory management decisions. * Hence, this routine must be called after jpeg_read_header (which reads * the image dimensions) and before jpeg_read_coefficients (which realizes * the source's virtual arrays). */ void jtransform_request_workspace (j_decompress_ptr srcinfo, jpeg_transform_info *info) { jvirt_barray_ptr *coef_arrays = NULL; jpeg_component_info *compptr; int ci; if (info->force_grayscale && srcinfo->jpeg_color_space == JCS_YCbCr && srcinfo->num_components == 3) { /* We'll only process the first component */ info->num_components = 1; } else { /* Process all the components */ info->num_components = srcinfo->num_components; } switch (info->transform) { case JXFORM_NONE: case JXFORM_FLIP_H: /* Don't need a workspace array */ break; case JXFORM_FLIP_V: case JXFORM_ROT_180: /* Need workspace arrays having same dimensions as source image. * Note that we allocate arrays padded out to the next iMCU boundary, * so that transform routines need not worry about missing edge blocks. */ coef_arrays = (jvirt_barray_ptr *) (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE, sizeof(jvirt_barray_ptr) * info->num_components); for (ci = 0; ci < info->num_components; ci++) { compptr = srcinfo->comp_info + ci; coef_arrays[ci] = (*srcinfo->mem->request_virt_barray) ((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE, (JDIMENSION) jround_up((long) compptr->width_in_blocks, (long) compptr->h_samp_factor), (JDIMENSION) jround_up((long) compptr->height_in_blocks, (long) compptr->v_samp_factor), (JDIMENSION) compptr->v_samp_factor); } break; case JXFORM_TRANSPOSE: case JXFORM_TRANSVERSE: case JXFORM_ROT_90: case JXFORM_ROT_270: /* Need workspace arrays having transposed dimensions. * Note that we allocate arrays padded out to the next iMCU boundary, * so that transform routines need not worry about missing edge blocks. */ coef_arrays = (jvirt_barray_ptr *) (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE, sizeof(jvirt_barray_ptr) * info->num_components); for (ci = 0; ci < info->num_components; ci++) { compptr = srcinfo->comp_info + ci; coef_arrays[ci] = (*srcinfo->mem->request_virt_barray) ((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE, (JDIMENSION) jround_up((long) compptr->height_in_blocks, (long) compptr->v_samp_factor), (JDIMENSION) jround_up((long) compptr->width_in_blocks, (long) compptr->h_samp_factor), (JDIMENSION) compptr->h_samp_factor); } break; } info->workspace_coef_arrays = coef_arrays; } /* Transpose destination image parameters */ static void transpose_critical_parameters (j_compress_ptr dstinfo) { int tblno, i, j, ci, itemp; jpeg_component_info *compptr; JQUANT_TBL *qtblptr; JDIMENSION dtemp; UINT16 qtemp; /* Transpose basic image dimensions */ dtemp = dstinfo->image_width; dstinfo->image_width = dstinfo->image_height; dstinfo->image_height = dtemp; /* Transpose sampling factors */ for (ci = 0; ci < dstinfo->num_components; ci++) { compptr = dstinfo->comp_info + ci; itemp = compptr->h_samp_factor; compptr->h_samp_factor = compptr->v_samp_factor; compptr->v_samp_factor = itemp; } /* Transpose quantization tables */ for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { qtblptr = dstinfo->quant_tbl_ptrs[tblno]; if (qtblptr != NULL) { for (i = 0; i < DCTSIZE; i++) { for (j = 0; j < i; j++) { qtemp = qtblptr->quantval[i*DCTSIZE+j]; qtblptr->quantval[i*DCTSIZE+j] = qtblptr->quantval[j*DCTSIZE+i]; qtblptr->quantval[j*DCTSIZE+i] = qtemp; } } } } } /* Trim off any partial iMCUs on the indicated destination edge */ static void trim_right_edge (j_compress_ptr dstinfo) { int ci, max_h_samp_factor; JDIMENSION MCU_cols; /* We have to compute max_h_samp_factor ourselves, * because it hasn't been set yet in the destination * (and we don't want to use the source's value). */ max_h_samp_factor = 1; for (ci = 0; ci < dstinfo->num_components; ci++) { int h_samp_factor = dstinfo->comp_info[ci].h_samp_factor; max_h_samp_factor = MAX(max_h_samp_factor, h_samp_factor); } MCU_cols = dstinfo->image_width / (max_h_samp_factor * DCTSIZE); if (MCU_cols > 0) /* can't trim to 0 pixels */ dstinfo->image_width = MCU_cols * (max_h_samp_factor * DCTSIZE); } static void trim_bottom_edge (j_compress_ptr dstinfo) { int ci, max_v_samp_factor; JDIMENSION MCU_rows; /* We have to compute max_v_samp_factor ourselves, * because it hasn't been set yet in the destination * (and we don't want to use the source's value). */ max_v_samp_factor = 1; for (ci = 0; ci < dstinfo->num_components; ci++) { int v_samp_factor = dstinfo->comp_info[ci].v_samp_factor; max_v_samp_factor = MAX(max_v_samp_factor, v_samp_factor); } MCU_rows = dstinfo->image_height / (max_v_samp_factor * DCTSIZE); if (MCU_rows > 0) /* can't trim to 0 pixels */ dstinfo->image_height = MCU_rows * (max_v_samp_factor * DCTSIZE); } /* Adjust output image parameters as needed. * * This must be called after jpeg_copy_critical_parameters() * and before jpeg_write_coefficients(). * * The return value is the set of virtual coefficient arrays to be written * (either the ones allocated by jtransform_request_workspace, or the * original source data arrays). The caller will need to pass this value * to jpeg_write_coefficients(). */ jvirt_barray_ptr * jtransform_adjust_parameters (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, jvirt_barray_ptr *src_coef_arrays, jpeg_transform_info *info) { /* If force-to-grayscale is requested, adjust destination parameters */ if (info->force_grayscale) { /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed * properly. Among other things, the target h_samp_factor & v_samp_factor * will get set to 1, which typically won't match the source. * In fact we do this even if the source is already grayscale; that * provides an easy way of coercing a grayscale JPEG with funny sampling * factors to the customary 1,1. (Some decoders fail on other factors.) */ if ((dstinfo->jpeg_color_space == JCS_YCbCr && dstinfo->num_components == 3) || (dstinfo->jpeg_color_space == JCS_GRAYSCALE && dstinfo->num_components == 1)) { /* We have to preserve the source's quantization table number. */ int sv_quant_tbl_no = dstinfo->comp_info[0].quant_tbl_no; jpeg_set_colorspace(dstinfo, JCS_GRAYSCALE); dstinfo->comp_info[0].quant_tbl_no = sv_quant_tbl_no; } else { /* Sorry, can't do it */ ERREXIT(dstinfo, JERR_CONVERSION_NOTIMPL); } } /* Correct the destination's image dimensions etc if necessary */ switch (info->transform) { case JXFORM_NONE: /* Nothing to do */ break; case JXFORM_FLIP_H: if (info->trim) trim_right_edge(dstinfo); break; case JXFORM_FLIP_V: if (info->trim) trim_bottom_edge(dstinfo); break; case JXFORM_TRANSPOSE: transpose_critical_parameters(dstinfo); /* transpose does NOT have to trim anything */ break; case JXFORM_TRANSVERSE: transpose_critical_parameters(dstinfo); if (info->trim) { trim_right_edge(dstinfo); trim_bottom_edge(dstinfo); } break; case JXFORM_ROT_90: transpose_critical_parameters(dstinfo); if (info->trim) trim_right_edge(dstinfo); break; case JXFORM_ROT_180: if (info->trim) { trim_right_edge(dstinfo); trim_bottom_edge(dstinfo); } break; case JXFORM_ROT_270: transpose_critical_parameters(dstinfo); if (info->trim) trim_bottom_edge(dstinfo); break; } /* Return the appropriate output data set */ if (info->workspace_coef_arrays != NULL) return info->workspace_coef_arrays; return src_coef_arrays; } /* Execute the actual transformation, if any. * * This must be called *after* jpeg_write_coefficients, because it depends * on jpeg_write_coefficients to have computed subsidiary values such as * the per-component width and height fields in the destination object. * * Note that some transformations will modify the source data arrays! */ void jtransform_execute_transformation (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, jvirt_barray_ptr *src_coef_arrays, jpeg_transform_info *info) { jvirt_barray_ptr *dst_coef_arrays = info->workspace_coef_arrays; switch (info->transform) { case JXFORM_NONE: break; case JXFORM_FLIP_H: do_flip_h(srcinfo, dstinfo, src_coef_arrays); break; case JXFORM_FLIP_V: do_flip_v(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays); break; case JXFORM_TRANSPOSE: do_transpose(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays); break; case JXFORM_TRANSVERSE: do_transverse(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays); break; case JXFORM_ROT_90: do_rot_90(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays); break; case JXFORM_ROT_180: do_rot_180(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays); break; case JXFORM_ROT_270: do_rot_270(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays); break; } } /* Setup decompression object to save desired markers in memory. * This must be called before jpeg_read_header() to have the desired effect. */ void jcopy_markers_setup (j_decompress_ptr srcinfo, JCOPY_OPTION option) { #ifdef SAVE_MARKERS_SUPPORTED int m; /* Save comments except under NONE option */ if (option != JCOPYOPT_NONE) { jpeg_save_markers(srcinfo, JPEG_COM, 0xFFFF); } /* Save all types of APPn markers iff ALL option */ if (option == JCOPYOPT_ALL) { for (m = 0; m < 16; m++) jpeg_save_markers(srcinfo, JPEG_APP0 + m, 0xFFFF); } #endif /* SAVE_MARKERS_SUPPORTED */ } /* Copy markers saved in the given source object to the destination object. * This should be called just after jpeg_start_compress() or * jpeg_write_coefficients(). * Note that those routines will have written the SOI, and also the * JFIF APP0 or Adobe APP14 markers if selected. */ void jcopy_markers_execute (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, JCOPY_OPTION option) { jpeg_saved_marker_ptr marker; /* In the current implementation, we don't actually need to examine the * option flag here; we just copy everything that got saved. * But to avoid confusion, we do not output JFIF and Adobe APP14 markers * if the encoder library already wrote one. */ for (marker = srcinfo->marker_list; marker != NULL; marker = marker->next) { if (dstinfo->write_JFIF_header && marker->marker == JPEG_APP0 && marker->data_length >= 5 && GETJOCTET(marker->data[0]) == 0x4A && GETJOCTET(marker->data[1]) == 0x46 && GETJOCTET(marker->data[2]) == 0x49 && GETJOCTET(marker->data[3]) == 0x46 && GETJOCTET(marker->data[4]) == 0) continue; /* reject duplicate JFIF */ if (dstinfo->write_Adobe_marker && marker->marker == JPEG_APP0+14 && marker->data_length >= 5 && GETJOCTET(marker->data[0]) == 0x41 && GETJOCTET(marker->data[1]) == 0x64 && GETJOCTET(marker->data[2]) == 0x6F && GETJOCTET(marker->data[3]) == 0x62 && GETJOCTET(marker->data[4]) == 0x65) continue; /* reject duplicate Adobe */ #ifdef NEED_FAR_POINTERS /* We could use jpeg_write_marker if the data weren't FAR... */ { unsigned int i; jpeg_write_m_header(dstinfo, marker->marker, marker->data_length); for (i = 0; i < marker->data_length; i++) jpeg_write_m_byte(dstinfo, marker->data[i]); } #else jpeg_write_marker(dstinfo, marker->marker, marker->data, marker->data_length); #endif } } #endif /* HAVE_LIBJPEG */ gpicview-0.2.4/src/working-area.c0000644000000000000000000000745712231705732013561 00000000000000/* * Guifications - The end all, be all, toaster popup plugin * Copyright (C) 2003-2004 Gary Kramlich * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* 2005.07.22 Modified by Hong Jen Yee (PCMan) This piece of code detecting working area is got from Guifications, a plug-in for Gaim. */ # include # include # include # include # include void get_working_area(GdkScreen* screen, GdkRectangle *rect); static gboolean gf_display_get_workarea(GdkScreen* g_screen, GdkRectangle *rect) { Atom xa_desktops, xa_current, xa_workarea, xa_type; Display *x_display; Window x_root; guint32 desktops = 0, current = 0; gulong *workareas, len, fill; guchar *data; gint format; GdkDisplay *g_display; Screen *x_screen; /* get the gdk display */ g_display = gdk_display_get_default(); if(!g_display) return FALSE; /* get the x display from the gdk display */ x_display = gdk_x11_display_get_xdisplay(g_display); if(!x_display) return FALSE; /* get the x screen from the gdk screen */ x_screen = gdk_x11_screen_get_xscreen(g_screen); if(!x_screen) return FALSE; /* get the root window from the screen */ x_root = XRootWindowOfScreen(x_screen); /* find the _NET_NUMBER_OF_DESKTOPS atom */ xa_desktops = XInternAtom(x_display, "_NET_NUMBER_OF_DESKTOPS", True); if(xa_desktops == None) return FALSE; /* get the number of desktops */ if(XGetWindowProperty(x_display, x_root, xa_desktops, 0, 1, False, XA_CARDINAL, &xa_type, &format, &len, &fill, &data) != Success) { return FALSE; } if(!data) return FALSE; desktops = *(guint32 *)data; XFree(data); /* find the _NET_CURRENT_DESKTOP atom */ xa_current = XInternAtom(x_display, "_NET_CURRENT_DESKTOP", True); if(xa_current == None) return FALSE; /* get the current desktop */ if(XGetWindowProperty(x_display, x_root, xa_current, 0, 1, False, XA_CARDINAL, &xa_type, &format, &len, &fill, &data) != Success) { return FALSE; } if(!data) return FALSE; current = *(guint32 *)data; XFree(data); /* find the _NET_WORKAREA atom */ xa_workarea = XInternAtom(x_display, "_NET_WORKAREA", True); if(xa_workarea == None) return FALSE; if(XGetWindowProperty(x_display, x_root, xa_workarea, 0, (glong)(4 * 32), False, AnyPropertyType, &xa_type, &format, &len, &fill, &data) != Success) { return FALSE; } /* make sure the type and format are good */ if(xa_type == None || format == 0) return FALSE; /* make sure we don't have any leftovers */ if(fill) return FALSE; /* make sure len divides evenly by 4 */ if(len % 4) return FALSE; /* it's good, lets use it */ workareas = (gulong *)(guint32 *)data; rect->x = (guint32)workareas[current * 4]; rect->y = (guint32)workareas[current * 4 + 1]; rect->width = (guint32)workareas[current * 4 + 2]; rect->height = (guint32)workareas[current * 4 + 3]; /* clean up our memory */ XFree(data); return TRUE; } void get_working_area(GdkScreen* screen, GdkRectangle *rect) { if( !gf_display_get_workarea(screen, rect) ) { rect->x = 0; rect->y = 0; rect->width = gdk_screen_width(); rect->height = gdk_screen_height(); } } gpicview-0.2.4/src/file-dlgs.c0000644000000000000000000002030012231705732013017 00000000000000/* * file-dlgs.c * * Copyright 2009 Hong Jen Yee (PCMan) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. */ #include #include #include "file-dlgs.h" #include "pref.h" static void on_update_preview( GtkFileChooser *chooser, GtkImage* img ) { char* file = gtk_file_chooser_get_preview_filename( chooser ); GdkPixbuf* pix = NULL; if( file ) { pix = gdk_pixbuf_new_from_file_at_scale( file, 128, 128, TRUE, NULL ); g_free( file ); } if( pix ) { gtk_image_set_from_pixbuf( img, pix ); g_object_unref( pix ); } } char* get_open_filename( GtkWindow* parent, const char* cwd ) { char* file = NULL; GtkFileChooser* dlg = (GtkFileChooser*)gtk_file_chooser_dialog_new( NULL, parent, GTK_FILE_CHOOSER_ACTION_OPEN, GTK_STOCK_CANCEL, GTK_RESPONSE_CANCEL, GTK_STOCK_OPEN, GTK_RESPONSE_OK, NULL ); GtkWidget* img; GtkFileFilter *filter; if( cwd ) gtk_file_chooser_set_current_folder( dlg, cwd ); img = gtk_image_new(); gtk_widget_set_size_request( img, 128, 128 ); gtk_file_chooser_set_preview_widget( dlg, img ); g_signal_connect( dlg, "update-preview", G_CALLBACK(on_update_preview), img ); filter = gtk_file_filter_new(); gtk_file_filter_set_name( filter, _("All Supported Images") ); gtk_file_filter_add_pixbuf_formats( filter ); gtk_file_chooser_add_filter( dlg, filter ); filter = gtk_file_filter_new(); gtk_file_filter_set_name( filter, _("All Files") ); gtk_file_filter_add_pattern( filter, "*" ); gtk_file_chooser_add_filter( dlg, filter ); if( gtk_dialog_run( (GtkDialog*)dlg ) == GTK_RESPONSE_OK ) file = gtk_file_chooser_get_filename( dlg ); gtk_widget_destroy( (GtkWidget*)dlg ); return file; } static void on_int_val_changed(GtkRange* range, gpointer user_data) { int* val = (int*)user_data; *val = (int)gtk_range_get_value(range); } static void on_file_save_filter_changed(GObject* obj, GParamSpec* pspec, gpointer user_data) { GtkFileChooser* dlg = (GtkFileChooser*)obj; GtkFileFilter* filter = gtk_file_chooser_get_filter( dlg ); const char* type = (const char*)g_object_get_data(G_OBJECT(filter), "type"); GtkWidget* extra = gtk_file_chooser_get_extra_widget(dlg); if(extra) { gtk_file_chooser_set_extra_widget(dlg, NULL); extra = NULL; } if( type ) { GtkWidget* label, *label2; GtkWidget* scale; if( strcmp( type, "jpeg" ) == 0 ) { extra = gtk_hbox_new(FALSE, 12); label = gtk_label_new(_("JPEG Quality:")); label2 = gtk_label_new(_("Lower quality values yield smaller file sizes,\nbut the image quality will be poorer.")); scale = gtk_hscale_new_with_range( 0, 100, 5 ); gtk_range_set_value(GTK_RANGE(scale), pref.jpg_quality); #if GTK_CHECK_VERSION(2, 24, 0) #else gtk_range_set_update_policy(GTK_RANGE(scale), GTK_UPDATE_DISCONTINUOUS); #endif g_signal_connect(G_OBJECT(scale), "value-changed", G_CALLBACK(on_int_val_changed), &pref.jpg_quality); gtk_scale_set_draw_value(GTK_SCALE(scale), TRUE); gtk_scale_set_value_pos(GTK_SCALE(scale), GTK_POS_RIGHT); gtk_box_pack_start(GTK_BOX(extra), label, FALSE, TRUE, 0); gtk_box_pack_start(GTK_BOX(extra), scale, TRUE, TRUE, 0); gtk_box_pack_start(GTK_BOX(extra), label2, FALSE, TRUE, 0); } else if( strcmp( type, "png" ) == 0 ) { extra = gtk_hbox_new(FALSE, 12); label = gtk_label_new(_("PNG Compression Level:")); label2 = gtk_label_new(_("Higher compression levels yield smaller file sizes,\nbut takes more time to do the compression.")); scale = gtk_hscale_new_with_range( 0, 9, 1 ); gtk_range_set_value(GTK_RANGE(scale), pref.png_compression); #if GTK_CHECK_VERSION(2, 24, 0) #else gtk_range_set_update_policy(GTK_RANGE(scale), GTK_UPDATE_DISCONTINUOUS); #endif g_signal_connect(G_OBJECT(scale), "value-changed", G_CALLBACK(on_int_val_changed), &pref.png_compression); gtk_scale_set_draw_value(GTK_SCALE(scale), TRUE); gtk_scale_set_value_pos(GTK_SCALE(scale), GTK_POS_RIGHT); gtk_box_pack_start(GTK_BOX(extra), label, FALSE, TRUE, 0); gtk_box_pack_start(GTK_BOX(extra), scale, TRUE, TRUE, 0); gtk_box_pack_start(GTK_BOX(extra), label2, FALSE, TRUE, 0); } /* FIXME: provide "depth settings for *.ico files" */ if( extra ) { gtk_widget_show_all(extra); gtk_file_chooser_set_extra_widget(dlg, extra); } } } char* get_save_filename( GtkWindow* parent, const char* cwd, char** type ) { char* file = NULL; GtkFileChooser* dlg = (GtkFileChooser*)gtk_file_chooser_dialog_new( NULL, parent, GTK_FILE_CHOOSER_ACTION_SAVE, GTK_STOCK_CANCEL, GTK_RESPONSE_CANCEL, GTK_STOCK_SAVE, GTK_RESPONSE_OK, NULL ); GSList* modules, *module; GtkFileFilter *filter; gtk_file_chooser_set_current_folder( dlg, cwd ); GtkWidget* img = gtk_image_new(); gtk_widget_set_size_request( img, 128, 128 ); gtk_file_chooser_set_preview_widget( dlg, img ); g_signal_connect( dlg, "update-preview", G_CALLBACK(on_update_preview), img ); g_signal_connect( dlg, "notify::filter", G_CALLBACK(on_file_save_filter_changed), NULL ); /* /// TODO: determine file type from file name filter = gtk_file_filter_new(); gtk_file_filter_set_name( filter, _("Determined by File Name") ); gtk_file_filter_add_pixbuf_formats( filter ); gtk_file_chooser_add_filter( dlg, filter ); */ modules = gdk_pixbuf_get_formats(); for( module = modules; module; module = module->next ) { char *name, *desc, *tmp; char **exts, **mimes, **mime; GdkPixbufFormat* format = (GdkPixbufFormat*)module->data; if( ! gdk_pixbuf_format_is_writable( format ) ) continue; filter = gtk_file_filter_new(); name = gdk_pixbuf_format_get_name( format ); desc = gdk_pixbuf_format_get_description( format ); exts = gdk_pixbuf_format_get_extensions( format ); mimes = gdk_pixbuf_format_get_mime_types( format ); tmp = g_strdup_printf( "%s (*.%s)", desc, exts[0], NULL ); g_object_set_data_full(G_OBJECT(filter), "type", name, (GDestroyNotify)g_free); g_strfreev(exts); g_free( desc ); gtk_file_filter_set_name( filter, tmp ); g_free( tmp ); for( mime = mimes; *mime ; ++mime ) gtk_file_filter_add_mime_type( filter, *mime ); g_strfreev( mimes ); gtk_file_chooser_add_filter( dlg, filter ); } g_slist_free( modules ); int initial_jpg_quality = pref.jpg_quality; int initial_png_compression = pref.png_compression; if( gtk_dialog_run( (GtkDialog*)dlg ) == GTK_RESPONSE_OK ) { filter = gtk_file_chooser_get_filter( dlg ); file = gtk_file_chooser_get_filename( dlg ); *type = g_object_steal_data(G_OBJECT(filter), "type"); if( !*type ) // auto detection { /// TODO: auto file type } else { /* TODO: append appropriate extension if needed. */ } } gtk_widget_destroy( (GtkWidget*)dlg ); if ((initial_jpg_quality != pref.jpg_quality) || (initial_png_compression != pref.png_compression)) save_preferences(); return file; } gpicview-0.2.4/src/xml-purge.c0000644000000000000000000000364512231705732013106 00000000000000#include #include #include #include #include #include #include #define IS_BLANK(ch) strchr(" \t\n\r", ch) static void purge_file( const char* file ) { struct stat statbuf; int fd; char* buf, *pbuf; int in_tag = 0, in_quote = 0; FILE* fo; fd = open( file, O_RDONLY ); if( fd == -1 ) return; if( fstat( fd, &statbuf) == -1 ) return; if( buf == (char*)malloc( statbuf.st_size + 1 ) ) { if( read( fd, buf, statbuf.st_size) == -1 ) { free( buf ); return; } buf[ statbuf.st_size ] = '\0'; } close( fd ); fo = fopen( file, "w" ); if( ! fo ) goto error; for( pbuf = buf; *pbuf; ++pbuf ) { if( in_tag > 0 ) { if( in_quote ) { if( *pbuf == '\"' ) in_quote = 0; } else { if( *pbuf == '\"' ) ++in_quote; if( ! in_quote && IS_BLANK(*pbuf) ) /* skip unnecessary blanks */ { do{ ++pbuf; }while( IS_BLANK( *pbuf ) ); if( *pbuf != '>' ) fputc( ' ', fo ); --pbuf; continue; } } if( *pbuf == '>' ) --in_tag; fputc( *pbuf, fo ); } else { if( *pbuf == '<' ) { if( 0 == strncmp( pbuf, "" ); if( ! pbuf ) goto error; pbuf += 2; continue; } ++in_tag; fputc( '<', fo ); } else { char* tmp = pbuf; while( *tmp && IS_BLANK( *tmp ) && *tmp != '<' ) ++tmp; if( *tmp == '<' ) /* all cdata are blank characters */ pbuf = tmp - 1; else /* not blank, keep the cdata */ { if( tmp == pbuf ) fputc( *pbuf, fo ); else { fwrite( pbuf, 1, tmp - pbuf, fo ); pbuf = tmp - 1; } } } } } fclose( fo ); error: free( buf ); } int main( int argc, char** argv ) { int i; if( argc < 2 ) return 1; for( i = 1; i < argc; ++i ) purge_file( argv[ i] ); return 0; } gpicview-0.2.4/src/pref.c0000644000000000000000000002212012231705732012107 00000000000000/* * pref.h * * Copyright (C) 2007 PCMan * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. */ #ifdef HAVE_CONFIG_H # include #endif #include #include #include #include "pref.h" #include "main-win.h" #define CFG_DIR "gpicview" #define CFG_FILE CFG_DIR"/gpicview.conf" Pref pref = {0}; static gboolean kf_get_bool(GKeyFile* kf, const char* grp, const char* name, gboolean* ret ) { GError* err = NULL; gboolean val = g_key_file_get_boolean(kf, grp, name, &err); if( G_UNLIKELY(err) ) { g_error_free(err); return FALSE; } if(G_LIKELY(ret)) *ret = val; return TRUE; } static int kf_get_int(GKeyFile* kf, const char* grp, const char* name, int* ret ) { GError* err = NULL; int val = g_key_file_get_integer(kf, grp, name, &err); if( G_UNLIKELY(err) ) { g_error_free(err); return FALSE; } if(G_LIKELY(ret)) *ret = val; return TRUE; } void load_preferences() { /* FIXME: GKeyFile is not fast enough. * Need to replace it with our own config loader in the future. */ GKeyFile* kf; char* path; char* color; /* pref.auto_save_rotated = FALSE; */ pref.ask_before_save = TRUE; pref.ask_before_delete = TRUE; pref.rotate_exif_only = TRUE; /* pref.open_maximized = FALSE; */ pref.bg.red = pref.bg.green = pref.bg.blue = 65535; pref.bg_full.red = pref.bg_full.green = pref.bg_full.blue = 0; pref.jpg_quality = 90; pref.png_compression = 9; pref.show_toolbar = TRUE; kf = g_key_file_new(); path = g_build_filename( g_get_user_config_dir(), CFG_FILE, NULL ); if( g_key_file_load_from_file( kf, path, 0, NULL ) ) { kf_get_bool( kf, "General", "auto_save_rotated", &pref.auto_save_rotated ); kf_get_bool( kf, "General", "ask_before_save", &pref.ask_before_save ); kf_get_bool( kf, "General", "ask_before_delete", &pref.ask_before_delete ); kf_get_bool( kf, "General", "rotate_exif_only", &pref.rotate_exif_only ); kf_get_bool( kf, "General", "open_maximized", &pref.open_maximized ); kf_get_int( kf, "General", "slide_delay", &pref.slide_delay ); kf_get_int( kf, "General", "jpg_quality", &pref.jpg_quality); kf_get_int( kf, "General", "png_compression", &pref.png_compression ); kf_get_bool( kf, "General", "show_toolbar", &pref.show_toolbar ); color = g_key_file_get_string(kf, "General", "bg", NULL); if( color ) { gdk_color_parse(color, &pref.bg); g_free(color); } color = g_key_file_get_string(kf, "General", "bg_full", NULL); if( color ) { gdk_color_parse(color, &pref.bg_full); g_free(color); } } g_free( path ); g_key_file_free( kf ); if (pref.slide_delay == 0) pref.slide_delay = 5; } void save_preferences() { FILE* f; char* dir = g_build_filename( g_get_user_config_dir(), CFG_DIR, NULL ); char* path = g_build_filename( g_get_user_config_dir(), CFG_FILE, NULL ); if( ! g_file_test( dir, G_FILE_TEST_IS_DIR ) ) { g_mkdir( g_get_user_config_dir(), 0766 ); g_mkdir( dir, 0766 ); } g_free( dir ); if( (f = fopen( path, "w" )) ) { fputs( "[General]\n", f ); fprintf( f, "auto_save_rotated=%d\n", pref.auto_save_rotated ); fprintf( f, "ask_before_save=%d\n", pref.ask_before_save ); fprintf( f, "ask_before_delete=%d\n", pref.ask_before_delete ); fprintf( f, "rotate_exif_only=%d\n", pref.rotate_exif_only ); fprintf( f, "open_maximized=%d\n", pref.open_maximized ); fprintf( f, "bg=#%02x%02x%02x\n", pref.bg.red/256, pref.bg.green/256, pref.bg.blue/256 ); fprintf( f, "bg_full=#%02x%02x%02x\n", pref.bg_full.red/256, pref.bg_full.green/256, pref.bg_full.blue/256 ); fprintf( f, "slide_delay=%d\n", pref.slide_delay ); fprintf( f, "jpg_quality=%d\n", pref.jpg_quality ); fprintf( f, "png_compression=%d\n", pref.png_compression ); fprintf( f, "show_toolbar=%d\n", pref.show_toolbar ); fclose( f ); } g_free( path ); } static void on_set_default( GtkButton* btn, gpointer user_data ) { GtkWindow* parent=(GtkWindow*)user_data; GtkWidget* dlg=gtk_message_dialog_new_with_markup( parent, 0, GTK_MESSAGE_WARNING, GTK_BUTTONS_OK_CANCEL, _("GPicView will become the default viewer for all supported image files on your system.\n" "(This will be done through \'xdg-mime\' program)\n\n" "Are you sure you really want to do this?") ); if( gtk_dialog_run( (GtkDialog*)dlg ) == GTK_RESPONSE_OK ) { const char cmd[]="xdg-mime default gpicview.desktop image/bmp image/gif image/jpeg image/jpg image/png image/tiff image/x-bmp image/x-pcx image/x-tga image/x-portable-pixmap image/x-portable-bitmap image/x-targa image/x-portable-greymap application/pcx image/svg+xml image/svg-xml"; g_spawn_command_line_sync( cmd, NULL, NULL, NULL, NULL ); } gtk_widget_destroy( dlg ); } static void on_set_bg( GtkColorButton* btn, gpointer user_data ) { MainWin* parent=(MainWin*)user_data; gtk_color_button_get_color(GTK_COLOR_BUTTON(btn), &pref.bg); if( !parent->full_screen ) { gtk_widget_modify_bg( parent->evt_box, GTK_STATE_NORMAL, &pref.bg ); gtk_widget_queue_draw(parent->evt_box ); } } static void on_set_bg_full( GtkColorButton* btn, gpointer user_data ) { MainWin* parent=(MainWin*)user_data; gtk_color_button_get_color(GTK_COLOR_BUTTON(btn), &pref.bg_full); if( parent->full_screen ) { gtk_widget_modify_bg( parent->evt_box, GTK_STATE_NORMAL, &pref.bg_full ); gtk_widget_queue_draw(parent->evt_box ); } } void edit_preferences( GtkWindow* parent ) { GtkWidget *auto_save_btn, *ask_before_save_btn, *set_default_btn, *rotate_exif_only_btn, *slide_delay_spinner, *ask_before_del_btn, *bg_btn, *bg_full_btn; GtkBuilder* builder = gtk_builder_new(); GtkDialog* dlg; gtk_builder_add_from_file(builder, PACKAGE_DATA_DIR "/gpicview/ui/pref-dlg.ui", NULL); dlg = (GtkDialog*)gtk_builder_get_object(builder, "dlg"); gtk_window_set_transient_for((GtkWindow*)dlg, parent); ask_before_save_btn = (GtkWidget*)gtk_builder_get_object(builder, "ask_before_save"); gtk_toggle_button_set_active( (GtkToggleButton*)ask_before_save_btn, pref.ask_before_save ); ask_before_del_btn = (GtkWidget*)gtk_builder_get_object(builder, "ask_before_delete"); gtk_toggle_button_set_active( (GtkToggleButton*)ask_before_del_btn, pref.ask_before_delete ); auto_save_btn = (GtkWidget*)gtk_builder_get_object(builder, "auto_save_rotated"); gtk_toggle_button_set_active( (GtkToggleButton*)auto_save_btn, pref.auto_save_rotated ); rotate_exif_only_btn = (GtkWidget*)gtk_builder_get_object(builder, "rotate_exif_only"); gtk_toggle_button_set_active( (GtkToggleButton*)rotate_exif_only_btn, pref.rotate_exif_only ); slide_delay_spinner = (GtkWidget*)gtk_builder_get_object(builder, "slide_delay"); gtk_spin_button_set_value( (GtkSpinButton*)slide_delay_spinner, pref.slide_delay) ; set_default_btn = (GtkWidget*)gtk_builder_get_object(builder, "make_default"); g_signal_connect( set_default_btn, "clicked", G_CALLBACK(on_set_default), parent ); bg_btn = (GtkWidget*)gtk_builder_get_object(builder, "bg"); gtk_color_button_set_color(GTK_COLOR_BUTTON(bg_btn), &pref.bg); g_signal_connect( bg_btn, "color-set", G_CALLBACK(on_set_bg), parent ); bg_full_btn = (GtkWidget*)gtk_builder_get_object(builder, "bg_full"); gtk_color_button_set_color(GTK_COLOR_BUTTON(bg_full_btn), &pref.bg_full); g_signal_connect( bg_full_btn, "color-set", G_CALLBACK(on_set_bg_full), parent ); g_object_unref( builder ); gtk_dialog_run( dlg ); pref.ask_before_save = gtk_toggle_button_get_active( (GtkToggleButton*)ask_before_save_btn ); pref.ask_before_delete = gtk_toggle_button_get_active( (GtkToggleButton*)ask_before_del_btn ); pref.auto_save_rotated = gtk_toggle_button_get_active( (GtkToggleButton*)auto_save_btn ); pref.rotate_exif_only = gtk_toggle_button_get_active( (GtkToggleButton*)rotate_exif_only_btn ); pref.slide_delay = gtk_spin_button_get_value_as_int( (GtkSpinButton*)slide_delay_spinner ); gtk_widget_destroy( (GtkWidget*)dlg ); } gpicview-0.2.4/src/ptk-menu.c0000644000000000000000000000633112231705732012721 00000000000000/* * C Implementation: ptkutils * * Description: * * * Author: Hong Jen Yee (PCMan) , (C) 2006 * * Copyright: See COPYING file that comes with this distribution * */ #include "ptk-menu.h" #include #include GtkWidget* ptk_menu_new_from_data( PtkMenuItemEntry* entries, gpointer cb_data, GtkAccelGroup* accel_group ) { GtkWidget* menu; menu = gtk_menu_new(); ptk_menu_add_items_from_data( menu, entries, cb_data, accel_group ); return menu; } void ptk_menu_add_items_from_data( GtkWidget* menu, PtkMenuItemEntry* entries, gpointer cb_data, GtkAccelGroup* accel_group ) { PtkMenuItemEntry* ent; GtkWidget* menu_item = NULL; GtkWidget* sub_menu; GtkWidget* image; GSList* radio_group = NULL; const char* signal; for( ent = entries; ; ++ent ) { if( G_LIKELY( ent->label ) ) { /* Stock item */ signal = "activate"; if( G_UNLIKELY( PTK_IS_STOCK_ITEM(ent) ) ) { menu_item = gtk_image_menu_item_new_from_stock( ent->label, accel_group ); } else if( G_LIKELY(ent->stock_icon) ) { if( G_LIKELY( ent->stock_icon > (char *)2 ) ) { menu_item = gtk_image_menu_item_new_with_mnemonic(_(ent->label)); if( g_str_has_prefix(ent->stock_icon, "gtk-") ) image = gtk_image_new_from_stock( ent->stock_icon, GTK_ICON_SIZE_MENU ); else image = gtk_image_new_from_icon_name( ent->stock_icon, GTK_ICON_SIZE_MENU ); gtk_image_menu_item_set_image( GTK_IMAGE_MENU_ITEM(menu_item), image ); } else if( G_UNLIKELY( PTK_IS_CHECK_MENU_ITEM(ent) ) ) { menu_item = gtk_check_menu_item_new_with_mnemonic(_(ent->label)); signal = "toggled"; } else if( G_UNLIKELY( PTK_IS_RADIO_MENU_ITEM(ent) ) ) { menu_item = gtk_radio_menu_item_new_with_mnemonic( radio_group, _(ent->label) ); if( G_LIKELY( PTK_IS_RADIO_MENU_ITEM( (ent + 1) ) ) ) radio_group = gtk_radio_menu_item_get_group( GTK_RADIO_MENU_ITEM(menu_item) ); else radio_group = NULL; signal = "toggled"; } } else { menu_item = gtk_menu_item_new_with_mnemonic(_(ent->label)); } if( G_LIKELY(accel_group) && ent->key ) { gtk_widget_add_accelerator (menu_item, "activate", accel_group, ent->key, ent->mod, GTK_ACCEL_VISIBLE); } if( G_LIKELY(ent->callback) ) { /* Callback */ g_signal_connect( menu_item, signal, ent->callback, cb_data); } if( G_UNLIKELY( ent->sub_menu ) ) { /* Sub menu */ sub_menu = ptk_menu_new_from_data( ent->sub_menu, cb_data, accel_group ); gtk_menu_item_set_submenu( GTK_MENU_ITEM(menu_item), sub_menu ); } } else { if( ! ent->stock_icon ) /* End of menu */ break; menu_item = gtk_separator_menu_item_new(); } gtk_menu_shell_append ( GTK_MENU_SHELL(menu), menu_item ); if( G_UNLIKELY(ent->ret) ) {/* Return */ *ent->ret = menu_item; ent->ret = NULL; } } } gpicview-0.2.4/src/gpicview.c0000644000000000000000000000756212231705732013005 00000000000000/*************************************************************************** * Copyright (C) 2007 by PCMan (Hong Jen Yee) * * pcman.tw@gmail.com * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ #ifdef HAVE_CONFIG_H #include #endif #include #include #include #include "pref.h" #include "main-win.h" static char** files = NULL; static gboolean should_display_version = FALSE; static gboolean should_start_slideshow = FALSE; static GOptionEntry opt_entries[] = { {G_OPTION_REMAINING, 0, 0, G_OPTION_ARG_FILENAME_ARRAY, &files, NULL, N_("[FILE]")}, {"version", 'v', G_OPTION_FLAG_IN_MAIN, G_OPTION_ARG_NONE, &should_display_version, N_("Print version information and exit"), NULL }, {"slideshow", 0, G_OPTION_FLAG_IN_MAIN, G_OPTION_ARG_NONE, &should_start_slideshow, N_("Start slideshow"), NULL }, { NULL } }; #define PIXMAP_DIR PACKAGE_DATA_DIR "/gpicview/pixmaps/" int main(int argc, char *argv[]) { GError *error = NULL; GOptionContext *context; MainWin* win; #ifdef ENABLE_NLS bindtextdomain ( GETTEXT_PACKAGE, PACKAGE_LOCALE_DIR ); bind_textdomain_codeset ( GETTEXT_PACKAGE, "UTF-8" ); textdomain ( GETTEXT_PACKAGE ); #endif context = g_option_context_new ("- simple image viewer"); g_option_context_add_main_entries (context, opt_entries, GETTEXT_PACKAGE); g_option_context_add_group (context, gtk_get_option_group (TRUE)); if ( !g_option_context_parse (context, &argc, &argv, &error) ) { g_print( "option parsing failed: %s\n", error->message); return 1; } if( should_display_version ) { printf( "gpicview %s\n", VERSION ); return 0; } gtk_icon_theme_append_search_path(gtk_icon_theme_get_default(), PIXMAP_DIR); load_preferences(); /* Allocate and show the window. * We must show the window now in case the file open needs to put up an error dialog. */ win = (MainWin*)main_win_new(); gtk_widget_show( GTK_WIDGET(win) ); if ( pref.open_maximized ) gtk_window_maximize( (GtkWindow*)win ); // FIXME: need to process multiple files... if( files ) { if( G_UNLIKELY( *files[0] != '/' && strstr( files[0], "://" )) ) // This is an URI { char* path = g_filename_from_uri( files[0], NULL, NULL ); main_win_open( win, path, ZOOM_NONE ); g_free( path ); } else main_win_open( win, files[0], ZOOM_NONE ); if (should_start_slideshow) main_win_start_slideshow ( win ); } else { main_win_open( win, ".", ZOOM_NONE ); } gtk_main(); save_preferences(); return 0; } gpicview-0.2.4/src/image-list.c0000644000000000000000000001452412231705732013217 00000000000000/*************************************************************************** * Copyright (C) 2007 by PCMan (Hong Jen Yee) * * pcman.tw@gmail.com * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ #ifdef HAVE_CONFIG_H # include #endif #include "image-list.h" #include "glib-mem.h" #include #include static GSList* supported_formats = NULL; static gboolean image_list_is_file_supported( const char* name ); ImageList* image_list_new() { ImageList* il = g_slice_new0( ImageList ); if( ! supported_formats ) { GSList* formats = gdk_pixbuf_get_formats(); GSList* format; for( format = formats; format; format = format->next ) { char** exts = gdk_pixbuf_format_get_extensions( (GdkPixbufFormat*)format->data ); char** ext; for( ext = exts; *ext ; ++ext ) supported_formats = g_slist_prepend( supported_formats, *ext ); g_free( exts ); // g_strfreev is not needed since we stole its stirngs } // supported_formats = g_slist_reverse( supported_formats, *ext ); } return il; } void image_list_free( ImageList* il ) { g_slice_free( ImageList, il ); } const char* image_list_get_dir( ImageList* il ) { return il->dir_path; } const char* image_list_get_current( ImageList* il ) { return il->current ? (char*)il->current->data : NULL; } gboolean image_list_is_empty( ImageList* il ) { return (il->list == NULL); } gboolean image_list_has_multiple_files( ImageList* il ) { return (il->list && il->list->next); } gboolean image_list_open_dir( ImageList* il, const char* path, GError** error ) { const char* name = NULL; GDir* dir; struct stat stbuf; if( il->dir_path && 0 == strcmp( path, il->dir_path ) ) return TRUE; image_list_close( il ); if( stat( path, &stbuf ) == -1 ) return FALSE; dir = g_dir_open( path, 0, error ); if( ! dir ) return FALSE; il->dir_path = g_strdup( path ); il->mtime = stbuf.st_mtime; while( ( name = g_dir_read_name ( dir ) ) ) { // char* file_path = g_build_filename( dir_path, name, NULL ); if( image_list_is_file_supported( name ) ) il->list = g_list_prepend( il->list, g_strdup(name) ); // g_free( file_path ); } g_dir_close( dir ); il->list = g_list_reverse( il->list ); il->current = il->list; return TRUE; } gboolean image_list_set_current( ImageList* il,const char* name ) { if( ! il->list || !name ) return FALSE; GList* cur = g_list_find_custom( il->list, name, (GCompareFunc)strcmp ); if( ! cur ) return FALSE; il->current = cur; return TRUE; } const char* image_list_get_first( ImageList* il ) { il->current = il->list; return image_list_get_current( il ); } const char* image_list_get_next( ImageList* il ) { if( il->current && il->current->next ) { il->current = il->current->next; return image_list_get_current( il ); } return NULL; } const char* image_list_get_prev( ImageList* il ) { if( il->current && il->current->prev ) { il->current = il->current->prev; return image_list_get_current( il ); } return NULL; } const char* image_list_get_last( ImageList* il ) { il->current = g_list_last( il->list ); return image_list_get_current( il ); } void image_list_close( ImageList* il ) { g_list_foreach( il->list, (GFunc)g_free, NULL ); g_list_free( il->list ); il->list = NULL; il->mtime = 0; g_free( il->dir_path ); il->dir_path = NULL; } static gboolean image_list_is_file_supported( const char* name ) { const char* ext = strrchr( name, '.' ); if( ! ext ) return FALSE; ++ext; return !!g_slist_find_custom ( supported_formats, ext, (GCompareFunc)g_ascii_strcasecmp); } char* image_list_get_current_file_path( ImageList* il ) { const char* name; if( il->dir_path && (name = image_list_get_current( il )) ) return g_build_filename( il->dir_path, name, NULL ); return NULL; } static int comp_by_name( char* name1, char* name2, GtkSortType type ) { // According to the glib API doc, UTF-8 should be considered here, // So the simple strcmp couldn't be used here. What a pity! char* utf8; utf8 = g_filename_display_name(name1); name1 = g_utf8_casefold( utf8, -1 ); g_free( utf8 ); utf8 = g_filename_display_name(name2); name2 = g_utf8_casefold( utf8, -1 ); g_free( utf8 ); int ret = g_utf8_collate( name1, name2 ); g_free( name1 ); g_free( name2 ); return type == GTK_SORT_ASCENDING ? -ret : ret; } void image_list_sort_by_name( ImageList* il, GtkSortType type ) { il->list = g_list_sort_with_data( il->list, (GCompareDataFunc)comp_by_name, (gpointer)type ); } void image_list_remove( ImageList* il, const char* name ) { il->list = g_list_remove( il->list, name ); } /* FIXME: currently only GTK_SORT_ASCENDING is supported */ void image_list_add_sorted( ImageList* il, const char* name, gboolean set_current ) { il->list = g_list_insert_sorted_with_data( il->list, g_strdup(name), (GCompareDataFunc)comp_by_name, (gpointer)GTK_SORT_ASCENDING ); } gpicview-0.2.4/src/working-area.h0000644000000000000000000000027212231705732013552 00000000000000#ifndef WORKING_AREA_H #define WORKING_AREA_H #include #include G_BEGIN_DECLS void get_working_area(GdkScreen* screen, GdkRectangle *rect); G_END_DECLS #endif gpicview-0.2.4/src/image-view.c0000644000000000000000000003731612231705732013222 00000000000000/*************************************************************************** * Copyright (C) 2007 by PCMan (Hong Jen Yee) * * pcman.tw@gmail.com * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ #include "image-view.h" #include static void image_view_finalize(GObject *iv); static void image_view_clear( ImageView* iv ); static gboolean on_idle( ImageView* iv ); static void calc_image_area( ImageView* iv ); static void paint( ImageView* iv, GdkRectangle* invalid_rect, GdkInterpType type ); #if GTK_CHECK_VERSION(3, 0, 0) static void image_view_paint( ImageView* iv, cairo_t* cr ); static void on_get_preferred_width( GtkWidget* widget, gint* minimal_width, gint* natural_width ); static void on_get_preferred_height( GtkWidget* widget, gint* minimal_height, gint* natural_height ); static gboolean on_draw_event(GtkWidget* widget, cairo_t* cr); #else // GTK2 static void image_view_paint( ImageView* iv, GdkEventExpose* evt ); static void on_size_request( GtkWidget* w, GtkRequisition* req ); static gboolean on_expose_event( GtkWidget* widget, GdkEventExpose* evt ); #endif static void on_size_allocate( GtkWidget* widget, GtkAllocation *allocation ); G_DEFINE_TYPE( ImageView, image_view, GTK_TYPE_MISC ); void image_view_init( ImageView* iv ) { iv->pix = NULL; iv->scale = 1.0; iv->interp_type = GDK_INTERP_BILINEAR; iv->idle_handler = 0; #if GTK_CHECK_VERSION(2, 18, 0) gtk_widget_set_can_focus((GtkWidget*)iv, TRUE ); gtk_widget_set_app_paintable((GtkWidget*)iv, TRUE ); #else GTK_WIDGET_SET_FLAGS( (GtkWidget*)iv, GTK_CAN_FOCUS | GTK_APP_PAINTABLE ); #endif } void image_view_class_init( ImageViewClass* klass ) { GObjectClass * obj_class; GtkWidgetClass *widget_class; obj_class = ( GObjectClass * ) klass; // obj_class->set_property = _set_property; // obj_class->get_property = _get_property; obj_class->finalize = image_view_finalize; widget_class = GTK_WIDGET_CLASS ( klass ); #if GTK_CHECK_VERSION(3, 0, 0) widget_class->get_preferred_width = on_get_preferred_width; widget_class->get_preferred_height = on_get_preferred_height; widget_class->draw = on_draw_event; #else // GTK2 widget_class->size_request = on_size_request; widget_class->expose_event = on_expose_event; #endif widget_class->size_allocate = on_size_allocate; /* // set up scrolling support klass->set_scroll_adjustments = set_adjustments; widget_class->set_scroll_adjustments_signal = g_signal_new ( "set_scroll_adjustments", G_TYPE_FROM_CLASS (obj_class), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (ImageView::Class, set_scroll_adjustments), NULL, NULL, _marshal_VOID__OBJECT_OBJECT, G_TYPE_NONE, 2, GTK_TYPE_ADJUSTMENT, GTK_TYPE_ADJUSTMENT); */ } void image_view_finalize(GObject *iv) { image_view_clear( (ImageView*)iv ); /* if( vadj ) g_object_unref( vadj ); if( hadj ) g_object_unref( hadj ); */ } GtkWidget* image_view_new() { return (GtkWidget*)g_object_new ( IMAGE_VIEW_TYPE, NULL ); } // End of GObject-related stuff void image_view_set_adjustments( ImageView* iv, GtkAdjustment* h, GtkAdjustment* v ) { if( iv->hadj != h ) { if( iv->hadj ) g_object_unref( iv->hadj ); if( G_LIKELY(h) ) { #if GTK_CHECK_VERSION( 2, 10, 0 ) iv->hadj = (GtkAdjustment*)g_object_ref_sink( h ); #else iv->hadj = (GtkAdjustment*)h; gtk_object_sink( (GtkObject*)h ); #endif } else iv->hadj = NULL; } if( iv->vadj != v ) { if( iv->vadj ) g_object_unref( iv->vadj ); if( G_LIKELY(v) ) { #if GTK_CHECK_VERSION( 2, 10, 0 ) iv->vadj = (GtkAdjustment*)g_object_ref_sink( v ); #else iv->vadj = (GtkAdjustment*)v; gtk_object_sink( (GtkObject*)v ); #endif } else iv->vadj = NULL; } } #if GTK_CHECK_VERSION(3, 0, 0) void on_get_preferred_width( GtkWidget* widget, gint* minimal_width, gint* natural_width ) { ImageView* iv = (ImageView*)widget; *minimal_width = *natural_width = iv->img_area.width; } void on_get_preferred_height( GtkWidget* widget, gint* minimal_height, gint* natural_height ) { ImageView* iv = (ImageView*)widget; *minimal_height = *natural_height = iv->img_area.height; } #else // GTK2 void on_size_request( GtkWidget* w, GtkRequisition* req ) { ImageView* iv = (ImageView*)w; w->requisition.width = iv->img_area.width; w->requisition.height = iv->img_area.height; GTK_WIDGET_CLASS(image_view_parent_class)->size_request (w, req); } #endif void on_size_allocate( GtkWidget* widget, GtkAllocation *allocation ) { GTK_WIDGET_CLASS(image_view_parent_class)->size_allocate( widget, allocation ); ImageView* iv = (ImageView*)widget; iv->allocation = *allocation; /* if( !iv->buffer || allocation->width != widget->allocation.width || allocation->height != widget->allocation.height ) { if( iv->buffer ) g_object_unref( iv->buffer ); iv->buffer = gdk_pixmap_new( (GdkDrawable*)widget->window, allocation->width, allocation->height, -1 ); g_debug( "off screen buffer created: %d x %d", allocation->width, allocation->height ); } */ calc_image_area( iv ); } #if GTK_CHECK_VERSION(3, 0, 0) static cairo_region_t * eel_cairo_get_clip_region (cairo_t *cr) /* From nautilus http://git.gnome.org/browse/nautilus/tree/eel/eel-canvas.c */ { cairo_rectangle_list_t *list; cairo_region_t *region; int i; list = cairo_copy_clip_rectangle_list (cr); if (list->status == CAIRO_STATUS_CLIP_NOT_REPRESENTABLE) { cairo_rectangle_int_t clip_rect; cairo_rectangle_list_destroy (list); if (!gdk_cairo_get_clip_rectangle (cr, &clip_rect)) return NULL; return cairo_region_create_rectangle (&clip_rect); } region = cairo_region_create (); for (i = list->num_rectangles - 1; i >= 0; --i) { cairo_rectangle_t *rect = &list->rectangles[i]; cairo_rectangle_int_t clip_rect; clip_rect.x = floor (rect->x); clip_rect.y = floor (rect->y); clip_rect.width = ceil (rect->x + rect->width) - clip_rect.x; clip_rect.height = ceil (rect->y + rect->height) - clip_rect.y; if (cairo_region_union_rectangle (region, &clip_rect) != CAIRO_STATUS_SUCCESS) { cairo_region_destroy (region); region = NULL; break; } } cairo_rectangle_list_destroy (list); return region; } static gboolean on_draw_event( GtkWidget* widget, cairo_t *cr ) { ImageView* iv = (ImageView*)widget; if ( gtk_widget_get_mapped(widget) ) image_view_paint( iv, cr ); return FALSE; } void image_view_paint( ImageView* iv, cairo_t *cr ) { if( iv->pix ) { cairo_region_t * region = eel_cairo_get_clip_region(cr); int n_rects = cairo_region_num_rectangles(region); int i; for( i = 0; i < n_rects; ++i ) { cairo_rectangle_int_t rectangle; cairo_region_get_rectangle(region, i, &rectangle); paint( iv, &rectangle, GDK_INTERP_NEAREST ); } cairo_region_destroy (region); if( 0 == iv->idle_handler ) iv->idle_handler = g_idle_add( (GSourceFunc)on_idle, iv ); } } #else gboolean on_expose_event( GtkWidget* widget, GdkEventExpose* evt ) { ImageView* iv = (ImageView*)widget; if( GTK_WIDGET_MAPPED (widget) ) image_view_paint( iv, evt ); return FALSE; } void image_view_paint( ImageView* iv, GdkEventExpose* evt ) { /* GtkWidget* widget = (GtkWidget*)iv; if( cached ) { // gdk_draw_drawable( drawable, widget->style->fg_gc[GTK_STATE_NORMAL], buffer, // 0, 0, ); return; } */ if( iv->pix ) { GdkRectangle* rects = NULL; int i, n_rects = 0; gdk_region_get_rectangles( evt->region, &rects, &n_rects ); for( i = 0; i < n_rects; ++i ) { // GdkRectangle& rect = rects[i]; paint( iv, rects + i, GDK_INTERP_NEAREST ); } g_free( rects ); if( 0 == iv->idle_handler ) iv->idle_handler = g_idle_add( (GSourceFunc)on_idle, iv ); } } #endif void image_view_clear( ImageView* iv ) { if( iv->idle_handler ) { g_source_remove( iv->idle_handler ); iv->idle_handler = 0; } if( iv->pix ) { g_object_unref( iv->pix ); iv->pix = NULL; calc_image_area( iv ); } /* if( buffer ) { g_object_unref( buffer ); buffer = NULL; } */ } void image_view_set_pixbuf( ImageView* iv, GdkPixbuf* pixbuf ) { if( pixbuf != iv->pix ) { image_view_clear( iv ); if( G_LIKELY(pixbuf) ) iv->pix = (GdkPixbuf*)g_object_ref( pixbuf ); calc_image_area( iv ); gtk_widget_queue_resize( (GtkWidget*)iv ); // gtk_widget_queue_draw( (GtkWidget*)iv); } } void image_view_set_scale( ImageView* iv, gdouble new_scale, GdkInterpType type ) { if( new_scale == iv->scale ) return; // gdouble factor = new_scale / iv->scale; iv->scale = new_scale; if( iv->pix ) { calc_image_area( iv ); gtk_widget_queue_resize( (GtkWidget*)iv ); // gtk_widget_queue_draw( (GtkWidget*)iv ); /* // adjust scroll bars int vis_w = ((GtkWidget*)iv)->allocation.width; if( hadj && vis_w < img_area.width ) { hadj->upper = img_area.width; hadj->page_size = vis_w; gdouble new_w = (hadj->value + vis_w / 2) * factor - vis_w/2; hadj->value = CLAMP( new_w, 0, hadj->upper - hadj->page_size ); gtk_adjustment_value_changed( hadj ); } int vis_h = ((GtkWidget*)iv)->allocation.height; if( vadj && vis_h < img_area.height ) { vadj->upper = img_area.height; vadj->page_size = vis_h; gdouble new_h = (vadj->value + vis_h / 2) * factor - vis_h/2; vadj->value = CLAMP( new_h, 0, vadj->upper - vadj->page_size ); gtk_adjustment_value_changed( vadj ); } */ } } gboolean on_idle( ImageView* iv ) { GDK_THREADS_ENTER(); // FIXME: redraw the whole window everytime is very inefficient // There must be some way to optimize iv. :-( GdkRectangle rect; if( G_LIKELY(iv->hadj) ) { rect.x = (int)gtk_adjustment_get_value(iv->hadj); #if GTK_CHECK_VERSION(2, 14, 0) rect.width = (int)gtk_adjustment_get_page_size(iv->hadj); #else rect.width = (int)iv->hadj->page_size; #endif } else { rect.x = iv->allocation.x; rect.width = iv->allocation.width; } if( G_LIKELY(iv->vadj) ) { rect.y = (int)gtk_adjustment_get_value(iv->vadj); #if GTK_CHECK_VERSION(2, 14, 0) rect.height = (int)gtk_adjustment_get_page_size(iv->vadj); #else rect.height = (int)iv->vadj->page_size; #endif } else { rect.y = iv->allocation.y; rect.height = iv->allocation.height; } paint( iv, &rect, iv->interp_type ); GDK_THREADS_LEAVE(); iv->idle_handler = 0; return FALSE; } void calc_image_area( ImageView* iv ) { if( G_LIKELY( iv->pix ) ) { GtkAllocation allocation = iv->allocation; iv->img_area.width = (int)floor( ((gdouble)gdk_pixbuf_get_width( iv->pix )) * iv->scale + 0.5 ); iv->img_area.height = (int)floor( ((gdouble)gdk_pixbuf_get_height( iv->pix )) * iv->scale + 0.5 ); // g_debug( "width=%d, height=%d", width, height ); int x_offset = 0, y_offset = 0; if( iv->img_area.width < allocation.width ) x_offset = (int)floor( ((gdouble)(allocation.width - iv->img_area.width)) / 2 + 0.5); if( iv->img_area.height < allocation.height ) y_offset = (int)floor( ((gdouble)(allocation.height - iv->img_area.height)) / 2 + 0.5); iv->img_area.x = x_offset; iv->img_area.y = y_offset; } else { iv->img_area.x = iv->img_area.y = iv->img_area.width = iv->img_area.height = 0; } } void paint( ImageView* iv, GdkRectangle* invalid_rect, GdkInterpType type ) { GdkRectangle rect; if( ! gdk_rectangle_intersect( invalid_rect, &iv->img_area, &rect ) ) return; int dest_x; int dest_y; GdkPixbuf* src_pix = NULL; if( iv->scale == 1.0 ) // original size { src_pix = (GdkPixbuf*)g_object_ref( iv->pix ); dest_x = iv->img_area.x; dest_y = iv->img_area.y; } else // scaling is needed { dest_x = rect.x; dest_y = rect.y; rect.x -= iv->img_area.x; rect.y -= iv->img_area.y; GdkPixbuf* scaled_pix = NULL; int src_x = (int)floor( ((gdouble)rect.x) / iv->scale + 0.5 ); int src_y = (int)floor( ((gdouble)rect.y) / iv->scale + 0.5 ); int src_w = (int)floor( ((gdouble)rect.width) / iv->scale + 0.5 ); int src_h = (int)floor( ((gdouble)rect.height) / iv->scale + 0.5 ); if( src_y > gdk_pixbuf_get_height( iv->pix ) ) src_y = gdk_pixbuf_get_height( iv->pix ); if( src_x + src_w > gdk_pixbuf_get_width( iv->pix ) ) src_w = gdk_pixbuf_get_width( iv->pix ) - src_x; if( src_y + src_h > gdk_pixbuf_get_height( iv->pix ) ) src_h = gdk_pixbuf_get_height( iv->pix ) - src_y; //g_debug("orig src: x=%d, y=%d, w=%d, h=%d", // src_x, src_y, src_w, src_h ); if ((src_w > 0) && (src_h > 0)) { src_pix = gdk_pixbuf_new_subpixbuf( iv->pix, src_x, src_y, src_w, src_h ); scaled_pix = gdk_pixbuf_scale_simple( src_pix, rect.width, rect.height, type ); g_object_unref( src_pix ); src_pix = scaled_pix; } } if( G_LIKELY(src_pix) ) { GtkWidget* widget = (GtkWidget*)iv; cairo_t *cr = gdk_cairo_create (gtk_widget_get_window(widget)); gdk_cairo_set_source_pixbuf (cr, src_pix, dest_x, dest_y); cairo_paint (cr); cairo_destroy (cr); g_object_unref( src_pix ); } } void image_view_get_size( ImageView* iv, int* w, int* h ) { if( G_LIKELY(w) ) *w = iv->img_area.width; if( G_LIKELY(h) ) *h = iv->img_area.height; } gpicview-0.2.4/src/exif.c0000644000000000000000000017030412231705732012116 00000000000000//-------------------------------------------------------------------------- // Program to pull the information out of various types of EXIF digital // camera files and show it in a reasonably consistent way // // This module parses the very complicated exif structures. // // Matthias Wandel //-------------------------------------------------------------------------- // Modified by hialan Liu //-------------------------------------------------------------------------- #include "jhead.h" #include static unsigned char * DirWithThumbnailPtrs; static double FocalplaneXRes; static double FocalplaneUnits; static int ExifImageWidth; static int MotorolaOrder = 0; // for fixing the rotation. static void * OrientationPtr[2]; static int OrientationNumFormat[2]; int NumOrientations = 0; typedef struct { unsigned short Tag; char * Desc; }TagTable_t; int ExifRotate(const char * fname, int new_angle); //-------------------------------------------------------------------------- // Table of Jpeg encoding process names static const TagTable_t ProcessTable[] = { { M_SOF0, "Baseline"}, { M_SOF1, "Extended sequential"}, { M_SOF2, "Progressive"}, { M_SOF3, "Lossless"}, { M_SOF5, "Differential sequential"}, { M_SOF6, "Differential progressive"}, { M_SOF7, "Differential lossless"}, { M_SOF9, "Extended sequential, arithmetic coding"}, { M_SOF10, "Progressive, arithmetic coding"}, { M_SOF11, "Lossless, arithmetic coding"}, { M_SOF13, "Differential sequential, arithmetic coding"}, { M_SOF14, "Differential progressive, arithmetic coding"}, { M_SOF15, "Differential lossless, arithmetic coding"}, }; #define PROCESS_TABLE_SIZE (sizeof(ProcessTable) / sizeof(TagTable_t)) // 1 - "The 0th row is at the visual top of the image, and the 0th column is the visual left-hand side." // 2 - "The 0th row is at the visual top of the image, and the 0th column is the visual right-hand side." // 3 - "The 0th row is at the visual bottom of the image, and the 0th column is the visual right-hand side." // 4 - "The 0th row is at the visual bottom of the image, and the 0th column is the visual left-hand side." // 5 - "The 0th row is the visual left-hand side of of the image, and the 0th column is the visual top." // 6 - "The 0th row is the visual right-hand side of of the image, and the 0th column is the visual top." // 7 - "The 0th row is the visual right-hand side of of the image, and the 0th column is the visual bottom." // 8 - "The 0th row is the visual left-hand side of of the image, and the 0th column is the visual bottom." // Note: The descriptions here are the same as the name of the command line // option to pass to jpegtran to right the image static const char * OrientTab[9] = { "Undefined", "Normal", // 1 "flip horizontal", // left right reversed mirror "rotate 180", // 3 "flip vertical", // upside down mirror "transpose", // Flipped about top-left <--> bottom-right axis. "rotate 90", // rotate 90 cw to right it. "transverse", // flipped about top-right <--> bottom-left axis "rotate 270", // rotate 270 to right it. }; const int BytesPerFormat[] = {0,1,1,2,4,8,1,1,2,4,8,4,8}; //-------------------------------------------------------------------------- // Describes tag values #define TAG_INTEROP_INDEX 0x0001 #define TAG_INTEROP_VERSION 0x0002 #define TAG_IMAGE_WIDTH 0x0100 #define TAG_IMAGE_LENGTH 0x0101 #define TAG_BITS_PER_SAMPLE 0x0102 #define TAG_COMPRESSION 0x0103 #define TAG_PHOTOMETRIC_INTERP 0x0106 #define TAG_FILL_ORDER 0x010A #define TAG_DOCUMENT_NAME 0x010D #define TAG_IMAGE_DESCRIPTION 0x010E #define TAG_MAKE 0x010F #define TAG_MODEL 0x0110 #define TAG_SRIP_OFFSET 0x0111 #define TAG_ORIENTATION 0x0112 #define TAG_SAMPLES_PER_PIXEL 0x0115 #define TAG_ROWS_PER_STRIP 0x0116 #define TAG_STRIP_BYTE_COUNTS 0x0117 #define TAG_X_RESOLUTION 0x011A #define TAG_Y_RESOLUTION 0x011B #define TAG_PLANAR_CONFIGURATION 0x011C #define TAG_RESOLUTION_UNIT 0x0128 #define TAG_TRANSFER_FUNCTION 0x012D #define TAG_SOFTWARE 0x0131 #define TAG_DATETIME 0x0132 #define TAG_ARTIST 0x013B #define TAG_WHITE_POINT 0x013E #define TAG_PRIMARY_CHROMATICITIES 0x013F #define TAG_TRANSFER_RANGE 0x0156 #define TAG_JPEG_PROC 0x0200 #define TAG_THUMBNAIL_OFFSET 0x0201 #define TAG_THUMBNAIL_LENGTH 0x0202 #define TAG_Y_CB_CR_COEFFICIENTS 0x0211 #define TAG_Y_CB_CR_SUB_SAMPLING 0x0212 #define TAG_Y_CB_CR_POSITIONING 0x0213 #define TAG_REFERENCE_BLACK_WHITE 0x0214 #define TAG_RELATED_IMAGE_WIDTH 0x1001 #define TAG_RELATED_IMAGE_LENGTH 0x1002 #define TAG_CFA_REPEAT_PATTERN_DIM 0x828D #define TAG_CFA_PATTERN1 0x828E #define TAG_BATTERY_LEVEL 0x828F #define TAG_COPYRIGHT 0x8298 #define TAG_EXPOSURETIME 0x829A #define TAG_FNUMBER 0x829D #define TAG_IPTC_NAA 0x83BB #define TAG_EXIF_OFFSET 0x8769 #define TAG_INTER_COLOR_PROFILE 0x8773 #define TAG_EXPOSURE_PROGRAM 0x8822 #define TAG_SPECTRAL_SENSITIVITY 0x8824 #define TAG_GPSINFO 0x8825 #define TAG_ISO_EQUIVALENT 0x8827 #define TAG_OECF 0x8828 #define TAG_EXIF_VERSION 0x9000 #define TAG_DATETIME_ORIGINAL 0x9003 #define TAG_DATETIME_DIGITIZED 0x9004 #define TAG_COMPONENTS_CONFIG 0x9101 #define TAG_CPRS_BITS_PER_PIXEL 0x9102 #define TAG_SHUTTERSPEED 0x9201 #define TAG_APERTURE 0x9202 #define TAG_BRIGHTNESS_VALUE 0x9203 #define TAG_EXPOSURE_BIAS 0x9204 #define TAG_MAXAPERTURE 0x9205 #define TAG_SUBJECT_DISTANCE 0x9206 #define TAG_METERING_MODE 0x9207 #define TAG_LIGHT_SOURCE 0x9208 #define TAG_FLASH 0x9209 #define TAG_FOCALLENGTH 0x920A #define TAG_MAKER_NOTE 0x927C #define TAG_USERCOMMENT 0x9286 #define TAG_SUBSEC_TIME 0x9290 #define TAG_SUBSEC_TIME_ORIG 0x9291 #define TAG_SUBSEC_TIME_DIG 0x9292 #define TAG_FLASH_PIX_VERSION 0xA000 #define TAG_COLOR_SPACE 0xA001 #define TAG_EXIF_IMAGEWIDTH 0xA002 #define TAG_EXIF_IMAGELENGTH 0xA003 #define TAG_RELATED_AUDIO_FILE 0xA004 #define TAG_INTEROP_OFFSET 0xA005 #define TAG_FLASH_ENERGY 0xA20B #define TAG_SPATIAL_FREQ_RESP 0xA20C #define TAG_FOCAL_PLANE_XRES 0xA20E #define TAG_FOCAL_PLANE_YRES 0xA20F #define TAG_FOCAL_PLANE_UNITS 0xA210 #define TAG_SUBJECT_LOCATION 0xA214 #define TAG_EXPOSURE_INDEX 0xA215 #define TAG_SENSING_METHOD 0xA217 #define TAG_FILE_SOURCE 0xA300 #define TAG_SCENE_TYPE 0xA301 #define TAG_CFA_PATTERN 0xA302 #define TAG_CUSTOM_RENDERED 0xA401 #define TAG_EXPOSURE_MODE 0xA402 #define TAG_WHITEBALANCE 0xA403 #define TAG_DIGITALZOOMRATIO 0xA404 #define TAG_FOCALLENGTH_35MM 0xA405 #define TAG_SCENE_CAPTURE_TYPE 0xA406 #define TAG_GAIN_CONTROL 0xA407 #define TAG_CONTRAST 0xA408 #define TAG_SATURATION 0xA409 #define TAG_SHARPNESS 0xA40A #define TAG_DISTANCE_RANGE 0xA40C static const TagTable_t TagTable[] = { { TAG_INTEROP_INDEX, "InteropIndex"}, { TAG_INTEROP_VERSION, "InteropVersion"}, { TAG_IMAGE_WIDTH, "ImageWidth"}, { TAG_IMAGE_LENGTH, "ImageLength"}, { TAG_BITS_PER_SAMPLE, "BitsPerSample"}, { TAG_COMPRESSION, "Compression"}, { TAG_PHOTOMETRIC_INTERP, "PhotometricInterpretation"}, { TAG_FILL_ORDER, "FillOrder"}, { TAG_DOCUMENT_NAME, "DocumentName"}, { TAG_IMAGE_DESCRIPTION, "ImageDescription"}, { TAG_MAKE, "Make"}, { TAG_MODEL, "Model"}, { TAG_SRIP_OFFSET, "StripOffsets"}, { TAG_ORIENTATION, "Orientation"}, { TAG_SAMPLES_PER_PIXEL, "SamplesPerPixel"}, { TAG_ROWS_PER_STRIP, "RowsPerStrip"}, { TAG_STRIP_BYTE_COUNTS, "StripByteCounts"}, { TAG_X_RESOLUTION, "XResolution"}, { TAG_Y_RESOLUTION, "YResolution"}, { TAG_PLANAR_CONFIGURATION, "PlanarConfiguration"}, { TAG_RESOLUTION_UNIT, "ResolutionUnit"}, { TAG_TRANSFER_FUNCTION, "TransferFunction"}, { TAG_SOFTWARE, "Software"}, { TAG_DATETIME, "DateTime"}, { TAG_ARTIST, "Artist"}, { TAG_WHITE_POINT, "WhitePoint"}, { TAG_PRIMARY_CHROMATICITIES, "PrimaryChromaticities"}, { TAG_TRANSFER_RANGE, "TransferRange"}, { TAG_JPEG_PROC, "JPEGProc"}, { TAG_THUMBNAIL_OFFSET, "ThumbnailOffset"}, { TAG_THUMBNAIL_LENGTH, "ThumbnailLength"}, { TAG_Y_CB_CR_COEFFICIENTS, "YCbCrCoefficients"}, { TAG_Y_CB_CR_SUB_SAMPLING, "YCbCrSubSampling"}, { TAG_Y_CB_CR_POSITIONING, "YCbCrPositioning"}, { TAG_REFERENCE_BLACK_WHITE, "ReferenceBlackWhite"}, { TAG_RELATED_IMAGE_WIDTH, "RelatedImageWidth"}, { TAG_RELATED_IMAGE_LENGTH, "RelatedImageLength"}, { TAG_CFA_REPEAT_PATTERN_DIM, "CFARepeatPatternDim"}, { TAG_CFA_PATTERN1, "CFAPattern"}, { TAG_BATTERY_LEVEL, "BatteryLevel"}, { TAG_COPYRIGHT, "Copyright"}, { TAG_EXPOSURETIME, "ExposureTime"}, { TAG_FNUMBER, "FNumber"}, { TAG_IPTC_NAA, "IPTC/NAA"}, { TAG_EXIF_OFFSET, "ExifOffset"}, { TAG_INTER_COLOR_PROFILE, "InterColorProfile"}, { TAG_EXPOSURE_PROGRAM, "ExposureProgram"}, { TAG_SPECTRAL_SENSITIVITY, "SpectralSensitivity"}, { TAG_GPSINFO, "GPS Dir offset"}, { TAG_ISO_EQUIVALENT, "ISOSpeedRatings"}, { TAG_OECF, "OECF"}, { TAG_EXIF_VERSION, "ExifVersion"}, { TAG_DATETIME_ORIGINAL, "DateTimeOriginal"}, { TAG_DATETIME_DIGITIZED, "DateTimeDigitized"}, { TAG_COMPONENTS_CONFIG, "ComponentsConfiguration"}, { TAG_CPRS_BITS_PER_PIXEL, "CompressedBitsPerPixel"}, { TAG_SHUTTERSPEED, "ShutterSpeedValue"}, { TAG_APERTURE, "ApertureValue"}, { TAG_BRIGHTNESS_VALUE, "BrightnessValue"}, { TAG_EXPOSURE_BIAS, "ExposureBiasValue"}, { TAG_MAXAPERTURE, "MaxApertureValue"}, { TAG_SUBJECT_DISTANCE, "SubjectDistance"}, { TAG_METERING_MODE, "MeteringMode"}, { TAG_LIGHT_SOURCE, "LightSource"}, { TAG_FLASH, "Flash"}, { TAG_FOCALLENGTH, "FocalLength"}, { TAG_MAKER_NOTE, "MakerNote"}, { TAG_USERCOMMENT, "UserComment"}, { TAG_SUBSEC_TIME, "SubSecTime"}, { TAG_SUBSEC_TIME_ORIG, "SubSecTimeOriginal"}, { TAG_SUBSEC_TIME_DIG, "SubSecTimeDigitized"}, { TAG_FLASH_PIX_VERSION, "FlashPixVersion"}, { TAG_COLOR_SPACE, "ColorSpace"}, { TAG_EXIF_IMAGEWIDTH, "ExifImageWidth"}, { TAG_EXIF_IMAGELENGTH, "ExifImageLength"}, { TAG_RELATED_AUDIO_FILE, "RelatedAudioFile"}, { TAG_INTEROP_OFFSET, "InteroperabilityOffset"}, { TAG_FLASH_ENERGY, "FlashEnergy"}, { TAG_SPATIAL_FREQ_RESP, "SpatialFrequencyResponse"}, { TAG_FOCAL_PLANE_XRES, "FocalPlaneXResolution"}, { TAG_FOCAL_PLANE_YRES, "FocalPlaneYResolution"}, { TAG_FOCAL_PLANE_UNITS, "FocalPlaneResolutionUnit"}, { TAG_SUBJECT_LOCATION, "SubjectLocation"}, { TAG_EXPOSURE_INDEX, "ExposureIndex"}, { TAG_SENSING_METHOD, "SensingMethod"}, { TAG_FILE_SOURCE, "FileSource"}, { TAG_SCENE_TYPE, "SceneType"}, { TAG_CFA_PATTERN, "CFA Pattern"}, { TAG_CUSTOM_RENDERED, "CustomRendered"}, { TAG_EXPOSURE_MODE, "ExposureMode"}, { TAG_WHITEBALANCE, "WhiteBalance"}, { TAG_DIGITALZOOMRATIO, "DigitalZoomRatio"}, { TAG_FOCALLENGTH_35MM, "FocalLengthIn35mmFilm"}, { TAG_SCENE_CAPTURE_TYPE, "SceneCaptureType"}, { TAG_GAIN_CONTROL, "GainControl"}, { TAG_CONTRAST, "Contrast"}, { TAG_SATURATION, "Saturation"}, { TAG_SHARPNESS, "Sharpness"}, { TAG_DISTANCE_RANGE, "SubjectDistanceRange"}, } ; #define TAG_TABLE_SIZE (sizeof(TagTable) / sizeof(TagTable_t)) //-------------------------------------------------------------------------- // Convert a 16 bit unsigned value to file's native byte order //-------------------------------------------------------------------------- static void Put16u(void * Short, unsigned short PutValue) { if (MotorolaOrder){ ((uchar *)Short)[0] = (uchar)(PutValue>>8); ((uchar *)Short)[1] = (uchar)PutValue; }else{ ((uchar *)Short)[0] = (uchar)PutValue; ((uchar *)Short)[1] = (uchar)(PutValue>>8); } } //-------------------------------------------------------------------------- // Convert a 16 bit unsigned value from file's native byte order //-------------------------------------------------------------------------- int Get16u(void * Short) { if (MotorolaOrder){ return (((uchar *)Short)[0] << 8) | ((uchar *)Short)[1]; }else{ return (((uchar *)Short)[1] << 8) | ((uchar *)Short)[0]; } } //-------------------------------------------------------------------------- // Convert a 32 bit signed value from file's native byte order //-------------------------------------------------------------------------- int Get32s(void * Long) { if (MotorolaOrder){ return ((( char *)Long)[0] << 24) | (((uchar *)Long)[1] << 16) | (((uchar *)Long)[2] << 8 ) | (((uchar *)Long)[3] << 0 ); }else{ return ((( char *)Long)[3] << 24) | (((uchar *)Long)[2] << 16) | (((uchar *)Long)[1] << 8 ) | (((uchar *)Long)[0] << 0 ); } } //-------------------------------------------------------------------------- // Convert a 32 bit unsigned value to file's native byte order //-------------------------------------------------------------------------- void Put32u(void * Value, unsigned PutValue) { if (MotorolaOrder){ ((uchar *)Value)[0] = (uchar)(PutValue>>24); ((uchar *)Value)[1] = (uchar)(PutValue>>16); ((uchar *)Value)[2] = (uchar)(PutValue>>8); ((uchar *)Value)[3] = (uchar)PutValue; }else{ ((uchar *)Value)[0] = (uchar)PutValue; ((uchar *)Value)[1] = (uchar)(PutValue>>8); ((uchar *)Value)[2] = (uchar)(PutValue>>16); ((uchar *)Value)[3] = (uchar)(PutValue>>24); } } //-------------------------------------------------------------------------- // Convert a 32 bit unsigned value from file's native byte order //-------------------------------------------------------------------------- unsigned Get32u(void * Long) { return (unsigned)Get32s(Long) & 0xffffffff; } //-------------------------------------------------------------------------- // Display a number as one of its many formats //-------------------------------------------------------------------------- void PrintFormatNumber(void * ValuePtr, int Format, int ByteCount) { int s,n; for(n=0;n<16;n++){ switch(Format){ case FMT_SBYTE: case FMT_BYTE: printf("%02x",*(uchar *)ValuePtr); s=1; break; case FMT_USHORT: printf("%d",Get16u(ValuePtr)); s=2; break; case FMT_ULONG: case FMT_SLONG: printf("%d",Get32s(ValuePtr)); s=4; break; case FMT_SSHORT: printf("%hd",(signed short)Get16u(ValuePtr)); s=2; break; case FMT_URATIONAL: case FMT_SRATIONAL: printf("%d/%d",Get32s(ValuePtr), Get32s(4+(char *)ValuePtr)); s = 8; break; case FMT_SINGLE: printf("%f",(double)*(float *)ValuePtr); s=8; break; case FMT_DOUBLE: printf("%f",*(double *)ValuePtr); s=8; break; default: printf("Unknown format %d:", Format); return; } ByteCount -= s; if (ByteCount <= 0) break; printf(", "); ValuePtr = (void *)((char *)ValuePtr + s); } if (n >= 16) printf("..."); } //-------------------------------------------------------------------------- // Evaluate number, be it int, rational, or float from directory. //-------------------------------------------------------------------------- double ConvertAnyFormat(void * ValuePtr, int Format) { double Value; Value = 0; switch(Format){ case FMT_SBYTE: Value = *(signed char *)ValuePtr; break; case FMT_BYTE: Value = *(uchar *)ValuePtr; break; case FMT_USHORT: Value = Get16u(ValuePtr); break; case FMT_ULONG: Value = Get32u(ValuePtr); break; case FMT_URATIONAL: case FMT_SRATIONAL: { int Num,Den; Num = Get32s(ValuePtr); Den = Get32s(4+(char *)ValuePtr); if (Den == 0){ Value = 0; }else{ Value = (double)Num/Den; } break; } case FMT_SSHORT: Value = (signed short)Get16u(ValuePtr); break; case FMT_SLONG: Value = Get32s(ValuePtr); break; // Not sure if this is correct (never seen float used in Exif format) case FMT_SINGLE: Value = (double)*(float *)ValuePtr; break; case FMT_DOUBLE: Value = *(double *)ValuePtr; break; default: ErrNonfatal("Illegal format code %d",Format,0); } return Value; } //-------------------------------------------------------------------------- // Process one of the nested EXIF directories. //-------------------------------------------------------------------------- static void ProcessExifDir(unsigned char * DirStart, unsigned char * OffsetBase, unsigned ExifLength, int NestingLevel) { int de; int a; int NumDirEntries; unsigned ThumbnailOffset = 0; unsigned ThumbnailSize = 0; char IndentString[25]; if (NestingLevel > 4){ ErrNonfatal("Maximum directory nesting exceeded (corrupt exif header)", 0,0); return; } memset(IndentString, ' ', 25); IndentString[NestingLevel * 4] = '\0'; NumDirEntries = Get16u(DirStart); #define DIR_ENTRY_ADDR(Start, Entry) (Start+2+12*(Entry)) { unsigned char * DirEnd; DirEnd = DIR_ENTRY_ADDR(DirStart, NumDirEntries); if (DirEnd+4 > (OffsetBase+ExifLength)){ if (DirEnd+2 == OffsetBase+ExifLength || DirEnd == OffsetBase+ExifLength){ // Version 1.3 of jhead would truncate a bit too much. // This also caught later on as well. }else{ ErrNonfatal("Illegally sized directory",0,0); return; } } if (DumpExifMap){ printf("Map: %05d-%05d: Directory\n",DirStart-OffsetBase, DirEnd+4-OffsetBase); } } if (ShowTags){ printf("(dir has %d entries)\n",NumDirEntries); } for (de=0;de= NUM_FORMATS) { // (-1) catches illegal zero case as unsigned underflows to positive large. ErrNonfatal("Illegal number format %d for tag %04x", Format, Tag); continue; } if ((unsigned)Components > 0x10000){ ErrNonfatal("Illegal number of components %d for tag %04x", Components, Tag); continue; } ByteCount = Components * BytesPerFormat[Format]; if (ByteCount > 4){ unsigned OffsetVal; OffsetVal = Get32u(DirEntry+8); // If its bigger than 4 bytes, the dir entry contains an offset. if (OffsetVal+ByteCount > ExifLength){ // Bogus pointer offset and / or bytecount value ErrNonfatal("Illegal value pointer for tag %04x", Tag,0); continue; } ValuePtr = OffsetBase+OffsetVal; if (OffsetVal > ImageInfo.LargestExifOffset){ ImageInfo.LargestExifOffset = OffsetVal; } if (DumpExifMap){ printf("Map: %05d-%05d: Data for tag %04x\n",OffsetVal, OffsetVal+ByteCount, Tag); } }else{ // 4 bytes or less and value is in the dir entry itself ValuePtr = DirEntry+8; } if (Tag == TAG_MAKER_NOTE){ if (ShowTags){ printf("%s Maker note: ",IndentString); } //ProcessMakerNote(ValuePtr, ByteCount, OffsetBase, ExifLength); continue; } if (ShowTags){ // Show tag name for (a=0;;a++){ if (a >= TAG_TABLE_SIZE){ printf("%s",IndentString); printf(" Unknown Tag %04x Value = ", Tag); break; } if (TagTable[a].Tag == Tag){ printf("%s",IndentString); printf(" %s = ",TagTable[a].Desc); break; } } // Show tag value. switch(Format){ case FMT_BYTE: if(ByteCount>1){ printf("%.*ls\n", ByteCount/2, (wchar_t *)ValuePtr); }else{ PrintFormatNumber(ValuePtr, Format, ByteCount); printf("\n"); } break; case FMT_UNDEFINED: // Undefined is typically an ascii string. case FMT_STRING: // String arrays printed without function call (different from int arrays) { int NoPrint = 0; printf("\""); for (a=0;a= 32){ putchar(ValuePtr[a]); NoPrint = 0; }else{ // Avoiding indicating too many unprintable characters of proprietary // bits of binary information this program may not know how to parse. if (!NoPrint && a != ByteCount-1){ putchar('?'); NoPrint = 1; } } } printf("\"\n"); } break; default: // Handle arrays of numbers later (will there ever be?) PrintFormatNumber(ValuePtr, Format, ByteCount); printf("\n"); } } // Extract useful components of tag switch(Tag){ case TAG_MAKE: strncpy(ImageInfo.CameraMake, (char *)ValuePtr, ByteCount < 31 ? ByteCount : 31); break; case TAG_MODEL: strncpy(ImageInfo.CameraModel, (char *)ValuePtr, ByteCount < 39 ? ByteCount : 39); break; case TAG_DATETIME_ORIGINAL: // If we get a DATETIME_ORIGINAL, we use that one. strncpy(ImageInfo.DateTime, (char *)ValuePtr, 19); // Fallthru... case TAG_DATETIME_DIGITIZED: case TAG_DATETIME: if (!isdigit(ImageInfo.DateTime[0])){ // If we don't already have a DATETIME_ORIGINAL, use whatever // time fields we may have. strncpy(ImageInfo.DateTime, (char *)ValuePtr, 19); } if (ImageInfo.numDateTimeTags >= MAX_DATE_COPIES){ ErrNonfatal("More than %d date fields! This is nuts", MAX_DATE_COPIES, 0); break; } ImageInfo.DateTimeOffsets[ImageInfo.numDateTimeTags++] = (char *)ValuePtr - (char *)OffsetBase; break; case TAG_USERCOMMENT: // Olympus has this padded with trailing spaces. Remove these first. for (a=ByteCount;;){ a--; if ((ValuePtr)[a] == ' '){ (ValuePtr)[a] = '\0'; }else{ break; } if (a == 0) break; } // Copy the comment if (memcmp(ValuePtr, "ASCII",5) == 0){ for (a=5;a<10;a++){ int c; c = (ValuePtr)[a]; if (c != '\0' && c != ' '){ strncpy(ImageInfo.Comments, (char *)ValuePtr+a, 199); break; } } }else{ strncpy(ImageInfo.Comments, (char *)ValuePtr, 199); } break; case TAG_FNUMBER: // Simplest way of expressing aperture, so I trust it the most. // (overwrite previously computd value if there is one) ImageInfo.ApertureFNumber = (float)ConvertAnyFormat(ValuePtr, Format); break; case TAG_APERTURE: case TAG_MAXAPERTURE: // More relevant info always comes earlier, so only use this field if we don't // have appropriate aperture information yet. if (ImageInfo.ApertureFNumber == 0){ ImageInfo.ApertureFNumber = (float)exp(ConvertAnyFormat(ValuePtr, Format)*log(2)*0.5); } break; case TAG_FOCALLENGTH: // Nice digital cameras actually save the focal length as a function // of how farthey are zoomed in. ImageInfo.FocalLength = (float)ConvertAnyFormat(ValuePtr, Format); break; case TAG_SUBJECT_DISTANCE: // Inidcates the distacne the autofocus camera is focused to. // Tends to be less accurate as distance increases. ImageInfo.Distance = (float)ConvertAnyFormat(ValuePtr, Format); break; case TAG_EXPOSURETIME: // Simplest way of expressing exposure time, so I trust it most. // (overwrite previously computd value if there is one) ImageInfo.ExposureTime = (float)ConvertAnyFormat(ValuePtr, Format); break; case TAG_SHUTTERSPEED: // More complicated way of expressing exposure time, so only use // this value if we don't already have it from somewhere else. if (ImageInfo.ExposureTime == 0){ ImageInfo.ExposureTime = (float)(1/exp(ConvertAnyFormat(ValuePtr, Format)*log(2))); } break; case TAG_FLASH: ImageInfo.FlashUsed=(int)ConvertAnyFormat(ValuePtr, Format); break; case TAG_ORIENTATION: if (NumOrientations >= 2){ // Can have another orientation tag for the thumbnail, but if there's // a third one, things are stringae. ErrNonfatal("More than two orientation tags!",0,0); break; } OrientationPtr[NumOrientations] = ValuePtr; OrientationNumFormat[NumOrientations] = Format; if (NumOrientations == 0){ ImageInfo.Orientation = (int)ConvertAnyFormat(ValuePtr, Format); } if (ImageInfo.Orientation < 0 || ImageInfo.Orientation > 8){ ErrNonfatal("Undefined rotation value %d", ImageInfo.Orientation, 0); ImageInfo.Orientation = 0; } NumOrientations += 1; break; case TAG_EXIF_IMAGELENGTH: case TAG_EXIF_IMAGEWIDTH: // Use largest of height and width to deal with images that have been // rotated to portrait format. a = (int)ConvertAnyFormat(ValuePtr, Format); if (ExifImageWidth < a) ExifImageWidth = a; break; case TAG_FOCAL_PLANE_XRES: FocalplaneXRes = ConvertAnyFormat(ValuePtr, Format); break; case TAG_FOCAL_PLANE_UNITS: switch((int)ConvertAnyFormat(ValuePtr, Format)){ case 1: FocalplaneUnits = 25.4; break; // inch case 2: // According to the information I was using, 2 means meters. // But looking at the Cannon powershot's files, inches is the only // sensible value. FocalplaneUnits = 25.4; break; case 3: FocalplaneUnits = 10; break; // centimeter case 4: FocalplaneUnits = 1; break; // millimeter case 5: FocalplaneUnits = .001; break; // micrometer } break; case TAG_EXPOSURE_BIAS: ImageInfo.ExposureBias = (float)ConvertAnyFormat(ValuePtr, Format); break; case TAG_WHITEBALANCE: ImageInfo.Whitebalance = (int)ConvertAnyFormat(ValuePtr, Format); break; case TAG_LIGHT_SOURCE: ImageInfo.LightSource = (int)ConvertAnyFormat(ValuePtr, Format); break; case TAG_METERING_MODE: ImageInfo.MeteringMode = (int)ConvertAnyFormat(ValuePtr, Format); break; case TAG_EXPOSURE_PROGRAM: ImageInfo.ExposureProgram = (int)ConvertAnyFormat(ValuePtr, Format); break; case TAG_EXPOSURE_INDEX: if (ImageInfo.ISOequivalent == 0){ // Exposure index and ISO equivalent are often used interchangeably, // so we will do the same in jhead. // http://photography.about.com/library/glossary/bldef_ei.htm ImageInfo.ISOequivalent = (int)ConvertAnyFormat(ValuePtr, Format); } break; case TAG_EXPOSURE_MODE: ImageInfo.ExposureMode = (int)ConvertAnyFormat(ValuePtr, Format); break; case TAG_ISO_EQUIVALENT: ImageInfo.ISOequivalent = (int)ConvertAnyFormat(ValuePtr, Format); if ( ImageInfo.ISOequivalent < 50 ){ // Fixes strange encoding on some older digicams. ImageInfo.ISOequivalent *= 200; } break; case TAG_DIGITALZOOMRATIO: ImageInfo.DigitalZoomRatio = (float)ConvertAnyFormat(ValuePtr, Format); break; case TAG_THUMBNAIL_OFFSET: ThumbnailOffset = (unsigned)ConvertAnyFormat(ValuePtr, Format); DirWithThumbnailPtrs = DirStart; break; case TAG_THUMBNAIL_LENGTH: ThumbnailSize = (unsigned)ConvertAnyFormat(ValuePtr, Format); ImageInfo.ThumbnailSizeOffset = ValuePtr-OffsetBase; break; case TAG_EXIF_OFFSET: if (ShowTags) printf("%s Exif Dir:",IndentString); case TAG_INTEROP_OFFSET: if (Tag == TAG_INTEROP_OFFSET && ShowTags) printf("%s Interop Dir:",IndentString); { unsigned char * SubdirStart; SubdirStart = OffsetBase + Get32u(ValuePtr); if (SubdirStart < OffsetBase || SubdirStart > OffsetBase+ExifLength){ ErrNonfatal("Illegal exif or interop ofset directory link",0,0); }else{ ProcessExifDir(SubdirStart, OffsetBase, ExifLength, NestingLevel+1); } continue; } break; case TAG_GPSINFO: if (ShowTags) printf("%s GPS info dir:",IndentString); { unsigned char * SubdirStart; SubdirStart = OffsetBase + Get32u(ValuePtr); if (SubdirStart < OffsetBase || SubdirStart > OffsetBase+ExifLength){ ErrNonfatal("Illegal GPS directory link",0,0); }else{ //ProcessGpsInfo(SubdirStart, ByteCount, OffsetBase, ExifLength); } continue; } break; case TAG_FOCALLENGTH_35MM: // The focal length equivalent 35 mm is a 2.2 tag (defined as of April 2002) // if its present, use it to compute equivalent focal length instead of // computing it from sensor geometry and actual focal length. ImageInfo.FocalLength35mmEquiv = (unsigned)ConvertAnyFormat(ValuePtr, Format); break; case TAG_DISTANCE_RANGE: // Three possible standard values: // 1 = macro, 2 = close, 3 = distant ImageInfo.DistanceRange = (int)ConvertAnyFormat(ValuePtr, Format); break; } } { // In addition to linking to subdirectories via exif tags, // there's also a potential link to another directory at the end of each // directory. this has got to be the result of a committee! unsigned char * SubdirStart; unsigned Offset; if (DIR_ENTRY_ADDR(DirStart, NumDirEntries) + 4 <= OffsetBase+ExifLength){ Offset = Get32u(DirStart+2+12*NumDirEntries); if (Offset){ SubdirStart = OffsetBase + Offset; if (SubdirStart > OffsetBase+ExifLength || SubdirStart < OffsetBase){ if (SubdirStart > OffsetBase && SubdirStart < OffsetBase+ExifLength+20){ // Jhead 1.3 or earlier would crop the whole directory! // As Jhead produces this form of format incorrectness, // I'll just let it pass silently if (ShowTags) printf("Thumbnail removed with Jhead 1.3 or earlier\n"); }else{ ErrNonfatal("Illegal subdirectory link",0,0); } }else{ if (SubdirStart <= OffsetBase+ExifLength){ if (ShowTags) printf("%s Continued directory ",IndentString); ProcessExifDir(SubdirStart, OffsetBase, ExifLength, NestingLevel+1); } } if (Offset > ImageInfo.LargestExifOffset){ ImageInfo.LargestExifOffset = Offset; } } }else{ // The exif header ends before the last next directory pointer. } } if (ThumbnailOffset){ ImageInfo.ThumbnailAtEnd = FALSE; if (DumpExifMap){ printf("Map: %05d-%05d: Thumbnail\n",ThumbnailOffset, ThumbnailOffset+ThumbnailSize); } if (ThumbnailOffset <= ExifLength){ if (ThumbnailSize > ExifLength-ThumbnailOffset){ // If thumbnail extends past exif header, only save the part that // actually exists. Canon's EOS viewer utility will do this - the // thumbnail extracts ok with this hack. ThumbnailSize = ExifLength-ThumbnailOffset; if (ShowTags) printf("Thumbnail incorrectly placed in header\n"); } // The thumbnail pointer appears to be valid. Store it. ImageInfo.ThumbnailOffset = ThumbnailOffset; ImageInfo.ThumbnailSize = ThumbnailSize; if (ShowTags){ printf("Thumbnail size: %d bytes\n",ThumbnailSize); } } } } //-------------------------------------------------------------------------- // Process a EXIF marker // Describes all the drivel that most digital cameras include... //-------------------------------------------------------------------------- void process_EXIF (unsigned char * ExifSection, unsigned int length) { int FirstOffset; FocalplaneXRes = 0; FocalplaneUnits = 0; ExifImageWidth = 0; NumOrientations = 0; if (ShowTags){ printf("Exif header %d bytes long\n",length); } { // Check the EXIF header component static uchar ExifHeader[] = "Exif\0\0"; if (memcmp(ExifSection+2, ExifHeader,6)){ ErrNonfatal("Incorrect Exif header",0,0); return; } } if (memcmp(ExifSection+8,"II",2) == 0){ if (ShowTags) printf("Exif section in Intel order\n"); MotorolaOrder = 0; }else{ if (memcmp(ExifSection+8,"MM",2) == 0){ if (ShowTags) printf("Exif section in Motorola order\n"); MotorolaOrder = 1; }else{ ErrNonfatal("Invalid Exif alignment marker.",0,0); return; } } // Check the next value for correctness. if (Get16u(ExifSection+10) != 0x2a){ ErrNonfatal("Invalid Exif start (1)",0,0); return; } FirstOffset = Get32u(ExifSection+12); if (FirstOffset < 8 || FirstOffset > 16){ // Usually set to 8, but other values valid too. ErrNonfatal("Suspicious offset of first IFD value",0,0); } DirWithThumbnailPtrs = NULL; // First directory starts 16 bytes in. All offset are relative to 8 bytes in. ProcessExifDir(ExifSection+8+FirstOffset, ExifSection+8, length-8, 0); ImageInfo.ThumbnailAtEnd = ImageInfo.ThumbnailOffset >= ImageInfo.LargestExifOffset ? TRUE : FALSE; if (DumpExifMap){ unsigned a,b; printf("Map: %05d- End of exif\n",length-8); for (a=0;a> 8); Buffer[1] = (unsigned char)DataWriteIndex; // Remove old exif section, if there was one. RemoveSectionType(M_EXIF); { // Sections need malloced buffers, so do that now, especially because // we now know how big it needs to be allocated. unsigned char * NewBuf = malloc(DataWriteIndex); if (NewBuf == NULL){ ErrFatal("Could not allocate memory"); } memcpy(NewBuf, Buffer, DataWriteIndex); CreateSection(M_EXIF, NewBuf, DataWriteIndex); // Re-parse new exif section, now that its in place // otherwise, we risk touching data that has already been freed. process_EXIF(NewBuf, DataWriteIndex); } } //-------------------------------------------------------------------------- // Cler the rotation tag in the exif header to 1. //-------------------------------------------------------------------------- const char * ClearOrientation(void) { int a; if (NumOrientations == 0) return NULL; for (a=0;atm_wday = -1; // Check for format: YYYY:MM:DD HH:MM:SS format. // Date and time normally separated by a space, but also seen a ':' there, so // skip the middle space with '%*c' so it can be any character. a = sscanf(ExifTime, "%d%*c%d%*c%d%*c%d:%d:%d", &timeptr->tm_year, &timeptr->tm_mon, &timeptr->tm_mday, &timeptr->tm_hour, &timeptr->tm_min, &timeptr->tm_sec); if (a == 6){ timeptr->tm_isdst = -1; timeptr->tm_mon -= 1; // Adjust for unix zero-based months timeptr->tm_year -= 1900; // Adjust for year starting at 1900 return TRUE; // worked. } return FALSE; // Wasn't in Exif date format. } //-------------------------------------------------------------------------- // Show the collected image info, displaying camera F-stop and shutter speed // in a consistent and legible fashion. //-------------------------------------------------------------------------- void ShowImageInfo(int ShowFileInfo) { if (ShowFileInfo){ printf("File name : %s\n",ImageInfo.FileName); printf("File size : %d bytes\n",ImageInfo.FileSize); { char Temp[20]; FileTimeAsString(Temp); printf("File date : %s\n",Temp); } } if (ImageInfo.CameraMake[0]){ printf("Camera make : %s\n",ImageInfo.CameraMake); printf("Camera model : %s\n",ImageInfo.CameraModel); } if (ImageInfo.DateTime[0]){ printf("Date/Time : %s\n",ImageInfo.DateTime); } printf("Resolution : %d x %d\n",ImageInfo.Width, ImageInfo.Height); if (ImageInfo.Orientation > 1){ // Only print orientation if one was supplied, and if its not 1 (normal orientation) printf("Orientation : %s\n", OrientTab[ImageInfo.Orientation]); } if (ImageInfo.IsColor == 0){ printf("Color/bw : Black and white\n"); } if (ImageInfo.FlashUsed >= 0){ if (ImageInfo.FlashUsed & 1){ printf("Flash used : Yes"); switch (ImageInfo.FlashUsed){ case 0x5: printf(" (Strobe light not detected)"); break; case 0x7: printf(" (Strobe light detected) "); break; case 0x9: printf(" (manual)"); break; case 0xd: printf(" (manual, return light not detected)"); break; case 0xf: printf(" (manual, return light detected)"); break; case 0x19:printf(" (auto)"); break; case 0x1d:printf(" (auto, return light not detected)"); break; case 0x1f:printf(" (auto, return light detected)"); break; case 0x41:printf(" (red eye reduction mode)"); break; case 0x45:printf(" (red eye reduction mode return light not detected)"); break; case 0x47:printf(" (red eye reduction mode return light detected)"); break; case 0x49:printf(" (manual, red eye reduction mode)"); break; case 0x4d:printf(" (manual, red eye reduction mode, return light not detected)"); break; case 0x4f:printf(" (red eye reduction mode, return light detected)"); break; case 0x59:printf(" (auto, red eye reduction mode)"); break; case 0x5d:printf(" (auto, red eye reduction mode, return light not detected)"); break; case 0x5f:printf(" (auto, red eye reduction mode, return light detected)"); break; } }else{ printf("Flash used : No"); switch (ImageInfo.FlashUsed){ case 0x18:printf(" (auto)"); break; } } printf("\n"); } if (ImageInfo.FocalLength){ printf("Focal length : %4.1fmm",(double)ImageInfo.FocalLength); if (ImageInfo.FocalLength35mmEquiv){ printf(" (35mm equivalent: %dmm)", ImageInfo.FocalLength35mmEquiv); } printf("\n"); } if (ImageInfo.DigitalZoomRatio > 1){ // Digital zoom used. Shame on you! printf("Digital Zoom : %1.3fx\n", (double)ImageInfo.DigitalZoomRatio); } if (ImageInfo.CCDWidth){ printf("CCD width : %4.2fmm\n",(double)ImageInfo.CCDWidth); } if (ImageInfo.ExposureTime){ if (ImageInfo.ExposureTime < 0.010){ printf("Exposure time: %6.4f s ",(double)ImageInfo.ExposureTime); }else{ printf("Exposure time: %5.3f s ",(double)ImageInfo.ExposureTime); } if (ImageInfo.ExposureTime <= 0.5){ printf(" (1/%d)",(int)(0.5 + 1/ImageInfo.ExposureTime)); } printf("\n"); } if (ImageInfo.ApertureFNumber){ printf("Aperture : f/%3.1f\n",(double)ImageInfo.ApertureFNumber); } if (ImageInfo.Distance){ if (ImageInfo.Distance < 0){ printf("Focus dist. : Infinite\n"); }else{ printf("Focus dist. : %4.2fm\n",(double)ImageInfo.Distance); } } if (ImageInfo.ISOequivalent){ printf("ISO equiv. : %2d\n",(int)ImageInfo.ISOequivalent); } if (ImageInfo.ExposureBias){ // If exposure bias was specified, but set to zero, presumably its no bias at all, // so only show it if its nonzero. printf("Exposure bias: %4.2f\n",(double)ImageInfo.ExposureBias); } switch(ImageInfo.Whitebalance) { case 1: printf("Whitebalance : Manual\n"); break; case 0: printf("Whitebalance : Auto\n"); break; } //Quercus: 17-1-2004 Added LightSource, some cams return this, whitebalance or both switch(ImageInfo.LightSource) { case 1: printf("Light Source : Daylight\n"); break; case 2: printf("Light Source : Fluorescent\n"); break; case 3: printf("Light Source : Incandescent\n"); break; case 4: printf("Light Source : Flash\n"); break; case 9: printf("Light Source : Fine weather\n"); break; case 11: printf("Light Source : Shade\n"); break; default:; //Quercus: 17-1-2004 There are many more modes for this, check Exif2.2 specs // If it just says 'unknown' or we don't know it, then // don't bother showing it - it doesn't add any useful information. } if (ImageInfo.MeteringMode){ // 05-jan-2001 vcs switch(ImageInfo.MeteringMode) { case 2: printf("Metering Mode: center weight\n"); break; case 3: printf("Metering Mode: spot\n"); break; case 5: printf("Metering Mode: matrix\n"); break; } } if (ImageInfo.ExposureProgram){ // 05-jan-2001 vcs switch(ImageInfo.ExposureProgram) { case 1: printf("Exposure : Manual\n"); break; case 2: printf("Exposure : program (auto)\n"); break; case 3: printf("Exposure : aperture priority (semi-auto)\n"); break; case 4: printf("Exposure : shutter priority (semi-auto)\n"); break; case 5: printf("Exposure : Creative Program (based towards depth of field)\n"); break; case 6: printf("Exposure : Action program (based towards fast shutter speed)\n"); break; case 7: printf("Exposure : Portrait Mode\n"); break; case 8: printf("Exposure : LandscapeMode \n"); break; default: break; } } switch(ImageInfo.ExposureMode){ case 0: // Automatic (not worth cluttering up output for) break; case 1: printf("Exposure Mode: Manual\n"); break; case 2: printf("Exposure Mode: Auto bracketing\n"); break; } if (ImageInfo.DistanceRange) { printf("Focus range : "); switch(ImageInfo.DistanceRange) { case 1: printf("macro"); break; case 2: printf("close"); break; case 3: printf("distant"); break; } printf("\n"); } if (ImageInfo.Process != M_SOF0){ // don't show it if its the plain old boring 'baseline' process, but do // show it if its something else, like 'progressive' (used on web sometimes) int a; for (a=0;;a++){ if (a >= PROCESS_TABLE_SIZE){ // ran off the end of the table. printf("Jpeg process : Unknown\n"); break; } if (ProcessTable[a].Tag == ImageInfo.Process){ printf("Jpeg process : %s\n",ProcessTable[a].Desc); break; } } } if (ImageInfo.GpsInfoPresent){ printf("GPS Latitude : %s\n",ImageInfo.GpsLat); printf("GPS Longitude: %s\n",ImageInfo.GpsLong); if (ImageInfo.GpsAlt[0]) printf("GPS Altitude : %s\n",ImageInfo.GpsAlt); } // Print the comment. Print 'Comment:' for each new line of comment. if (ImageInfo.Comments[0]){ int a,c; printf("Comment : "); for (a=0;a= 0 && ImageInfo.FlashUsed & 1){ printf(" (flash)"); } if (ImageInfo.IsColor == 0){ printf(" (bw)"); } printf("\n"); } #endif //-------------------------------------------------------------------------- // use EXIF Orientation to Rotate image //-------------------------------------------------------------------------- // ExifRotateFlipMapping [orig_angle][new_angle] int ExifRotateFlipMapping[9][9]= { //0 undef {0, 0, 0, 0, 0, 0, 0, 0, 0}, //1 normal {0, 1, 2, 3, 4, 5, 6, 7, 8}, //2 flip horizontal {0, 2, 1, 4, 3, 6, 5, 8, 7}, //3 rotate 180 {0, 3, 4, 1, 2, 7, 8, 5, 6}, //4 flip vertical {0, 4, 3, 2, 1, 8, 7, 6, 5}, //5 transpose: Flipped about top-left <--> bottom-right axis. {0, 5, 8, 7, 6, 1, 4, 3, 2}, //6 rotate 90 {0, 6, 7, 8, 5, 2, 3, 4, 1}, //7 transverse: flipped about top-right <--> bottom-left axis {0, 7, 6, 5, 8, 3, 2, 1, 4}, //8 rotate 270 {0, 8, 5, 6, 7, 4, 1, 2, 3}, }; int ExifRotate(const char * fname, int new_angle) { int fail = FALSE; int exif_angle = 0; int a; if(new_angle == 0) return TRUE; // use jhead functions ResetJpgfile(); // Start with an empty image information structure. memset(&ImageInfo, 0, sizeof(ImageInfo)); if (!ReadJpegFile( fname, READ_ALL)) return FALSE; if (NumOrientations != 0) { if(new_angle == 0) new_angle = 1; else if(new_angle == 90) new_angle = 6; else if(new_angle == 180) new_angle = 3; else if(new_angle == 270) new_angle = 8; else if(new_angle == -45) new_angle = 7; else if(new_angle == -90) new_angle = 2; else if(new_angle == -135) new_angle = 5; else if(new_angle == -180) new_angle = 4; exif_angle = ExifRotateFlipMapping[ImageInfo.Orientation][new_angle]; for (a=0;a #ifdef HAVE_LIBJPEG #ifndef JPEGTRAN_H #define JPEGTRAN_H #include "tran-supp.h" int jpegtran (char *input_filename, char *output_filename, JXFORM_CODE transformation); //Martin Siggel: added this wrapper for easy rotation //int rotateJpegLossless(char * filename,int angle); int rotate_and_save_jpeg_lossless(char * filename,int angle); #endif /* JPEGTRAN_H */ #endif /* HAVE_LIBJPEG */ gpicview-0.2.4/src/jpeg-tran.c0000644000000000000000000001604412231705732013052 00000000000000/* -*- Mode: C; tab-width: 8; indent-tabs-mode: t; c-basic-offset: 8 -*- */ /* * GThumb * * Copyright (C) 2001, 2002 The Free Software Foundation, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Street #330, Boston, MA 02111-1307, USA. */ /* based upon file jpegtran.c from the libjpeg package, original copyright * note follows: * * jpegtran.c * * Copyright (C) 1995-1997, Thomas G. Lane. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * * This file contains a command-line user interface for JPEG transcoding. * It is very similar to cjpeg.c, but provides lossless transcoding between * different JPEG file formats. It also provides some lossless and sort-of- * lossless transformations of JPEG data. */ #include #ifdef HAVE_LIBJPEG #include #include #include #include #include #include "tran-supp.h" /* Support routines for jpegtran */ #include #include #include #include int jpegtran (char *input_filename, char *output_filename, JXFORM_CODE transformation); int rotate_and_save_jpeg_lossless(char * filename,int angle); int jpegtran (char *input_filename, char *output_filename, JXFORM_CODE transformation) { struct jpeg_decompress_struct srcinfo; struct jpeg_compress_struct dstinfo; struct jpeg_error_mgr jsrcerr, jdsterr; jpeg_transform_info transformoption; jvirt_barray_ptr *src_coef_arrays; jvirt_barray_ptr *dst_coef_arrays; FILE *input_file; FILE *output_file; transformoption.transform = transformation; transformoption.trim = FALSE; transformoption.force_grayscale = FALSE; /* Initialize the JPEG decompression object with default error * handling. */ srcinfo.err = jpeg_std_error (&jsrcerr); jpeg_create_decompress (&srcinfo); /* Initialize the JPEG compression object with default error * handling. */ dstinfo.err = jpeg_std_error (&jdsterr); jpeg_create_compress (&dstinfo); dstinfo.err->trace_level = 0; dstinfo.arith_code = FALSE; dstinfo.optimize_coding = FALSE; jsrcerr.trace_level = jdsterr.trace_level; srcinfo.mem->max_memory_to_use = dstinfo.mem->max_memory_to_use; /* Open the input file. */ input_file = fopen (input_filename, "rb"); if (input_file == NULL) return 1; output_file = fopen (output_filename, "wb"); if (output_file == NULL) { fclose (input_file); return 1; } /* Specify data source for decompression */ jpeg_stdio_src (&srcinfo, input_file); /* Enable saving of extra markers that we want to copy */ jcopy_markers_setup (&srcinfo, JCOPYOPT_ALL); /* Read file header */ (void) jpeg_read_header (&srcinfo, TRUE); /* Any space needed by a transform option must be requested before * jpeg_read_coefficients so that memory allocation will be done right. */ jtransform_request_workspace (&srcinfo, &transformoption); /* Read source file as DCT coefficients */ src_coef_arrays = jpeg_read_coefficients (&srcinfo); /* Initialize destination compression parameters from source values */ jpeg_copy_critical_parameters (&srcinfo, &dstinfo); /* Adjust destination parameters if required by transform options; * also find out which set of coefficient arrays will hold the output. */ dst_coef_arrays = jtransform_adjust_parameters (&srcinfo, &dstinfo, src_coef_arrays, &transformoption); /* Specify data destination for compression */ jpeg_stdio_dest (&dstinfo, output_file); /* Start compressor (note no image data is actually written here) */ jpeg_write_coefficients (&dstinfo, dst_coef_arrays); /* Copy to the output file any extra markers that we want to * preserve */ jcopy_markers_execute (&srcinfo, &dstinfo, JCOPYOPT_ALL); /* Execute image transformation, if any */ jtransform_execute_transformation (&srcinfo, &dstinfo, src_coef_arrays, &transformoption); /* Finish compression and release memory */ jpeg_finish_compress (&dstinfo); jpeg_destroy_compress (&dstinfo); (void) jpeg_finish_decompress (&srcinfo); jpeg_destroy_decompress (&srcinfo); /* Close files */ fclose (input_file); fclose (output_file); return 0; } #ifdef TEST int main (int argc, char **argv) { char *input_filename; char *output_filename; if (argc != 3) { fprintf (stderr, "%s input_image output_image", argv[0]); return 1; } input_filename = argv[1]; output_filename = argv[2]; /* JXFORM_ROT_90 JXFORM_ROT_180 JXFORM_ROT_270 JXFORM_FLIP_H JXFORM_FLIP_V */ return jpegtran (input_filename, output_filename, JXFORM_FLIP_H); } #endif /* TEST */ int rotate_and_save_jpeg_lossless(char * filename,int angle) { char *tmpfilename; int tmpfilefd; /* if(angle < 0) return EINVAL; */ JXFORM_CODE code = JXFORM_NONE; angle = angle % 360; if(angle == 90) code = JXFORM_ROT_90; else if(angle == 180) code = JXFORM_ROT_180; else if(angle == 270) code = JXFORM_ROT_270; else if(angle == -90) code = JXFORM_FLIP_H; else if(angle == -180) code = JXFORM_FLIP_V; /* Length check temporary file name. */ if((tmpfilename = malloc(strlen(filename)+8)) == NULL) return EINVAL; sprintf(tmpfilename, "%s.XXXXXX", filename); /* Create temporary file. */ tmpfilefd = mkstemp(tmpfilename); if (tmpfilefd == -1) { free(tmpfilename); return errno; } close(tmpfilefd); /* Rotate the image and save it to temporary file. */ int error = jpegtran (filename, tmpfilename, code); if(error) { int saved_errno = errno; unlink(tmpfilename); free(tmpfilename); return saved_errno; } /* Rename temporary file over the original file. */ int error_1 = g_rename(tmpfilename, filename); if (error_1 == -1) { int saved_errno = errno; unlink(tmpfilename); free(tmpfilename); return saved_errno; } return 0; } #endif /* HAVE_LIBJPEG */ gpicview-0.2.4/src/jpgfile.c0000644000000000000000000005006012231705732012577 00000000000000//-------------------------------------------------------------------------- // Program to pull the information out of various types of EXIF digital // camera files and show it in a reasonably consistent way // // This module handles basic Jpeg file handling // // Matthias Wandel //-------------------------------------------------------------------------- #include "jhead.h" // Storage for simplified info extracted from file. ImageInfo_t ImageInfo; static Section_t * Sections = NULL; static int SectionsAllocated; static int SectionsRead; static int HaveAll; void CheckSectionsAllocated(void); #define PSEUDO_IMAGE_MARKER 0x123; // Extra value. //-------------------------------------------------------------------------- // Get 16 bits motorola order (always) for jpeg header stuff. //-------------------------------------------------------------------------- static int Get16m(const void * Short) { return (((uchar *)Short)[0] << 8) | ((uchar *)Short)[1]; } //-------------------------------------------------------------------------- // Process a COM marker. // We want to print out the marker contents as legible text; // we must guard against random junk and varying newline representations. //-------------------------------------------------------------------------- static void process_COM (const uchar * Data, int length) { int ch; char Comment[MAX_COMMENT_SIZE+1]; int nch; int a; nch = 0; if (length > MAX_COMMENT_SIZE) length = MAX_COMMENT_SIZE; // Truncate if it won't fit in our structure. for (a=2;a= 32 || ch == '\n' || ch == '\t'){ Comment[nch++] = (char)ch; }else{ Comment[nch++] = '?'; } } Comment[nch] = '\0'; // Null terminate if (ShowTags){ printf("COM marker comment: %s\n",Comment); } strcpy(ImageInfo.Comments,Comment); } //-------------------------------------------------------------------------- // Process a SOFn marker. This is useful for the image dimensions //-------------------------------------------------------------------------- static void process_SOFn (const uchar * Data, int marker) { int data_precision, num_components; data_precision = Data[2]; ImageInfo.Height = Get16m(Data+3); ImageInfo.Width = Get16m(Data+5); num_components = Data[7]; if (num_components == 3){ ImageInfo.IsColor = 1; }else{ ImageInfo.IsColor = 0; } ImageInfo.Process = marker; if (ShowTags){ printf("JPEG image is %uw * %uh, %d color components, %d bits per sample\n", ImageInfo.Width, ImageInfo.Height, num_components, data_precision); } } //-------------------------------------------------------------------------- // Check sections array to see if it needs to be increased in size. //-------------------------------------------------------------------------- void CheckSectionsAllocated(void) { if (SectionsRead > SectionsAllocated){ ErrFatal("allocation screwup"); } if (SectionsRead >= SectionsAllocated){ SectionsAllocated += SectionsAllocated/2; Sections = (Section_t *)realloc(Sections, sizeof(Section_t)*SectionsAllocated); if (Sections == NULL){ ErrFatal("could not allocate data for entire image"); } } } //-------------------------------------------------------------------------- // Parse the marker stream until SOS or EOI is seen; //-------------------------------------------------------------------------- int ReadJpegSections (FILE * infile, ReadMode_t ReadMode) { int a; int HaveCom = FALSE; a = fgetc(infile); if (a != 0xff || fgetc(infile) != M_SOI){ return FALSE; } for(;;){ int itemlen; int marker = 0; int ll,lh, got; uchar * Data; CheckSectionsAllocated(); for (a=0;a<7;a++){ marker = fgetc(infile); if (marker != 0xff) break; if (a >= 32){ fprintf(stderr,"too many padding bytes\n"); return FALSE; } } Sections[SectionsRead].Type = marker; // Read the length of the section. lh = fgetc(infile); ll = fgetc(infile); itemlen = (lh << 8) | ll; if (itemlen < 2){ ErrFatal("invalid marker"); } Sections[SectionsRead].Size = itemlen; Data = (uchar *)malloc(itemlen); if (Data == NULL){ ErrFatal("Could not allocate memory"); } Sections[SectionsRead].Data = Data; // Store first two pre-read bytes. Data[0] = (uchar)lh; Data[1] = (uchar)ll; got = fread(Data+2, 1, itemlen-2, infile); // Read the whole section. if (got != itemlen-2){ ErrFatal("Premature end of file?"); } SectionsRead += 1; switch(marker){ case M_SOS: // stop before hitting compressed data // If reading entire image is requested, read the rest of the data. if (ReadMode & READ_IMAGE){ int cp, ep, size; // Determine how much file is left. cp = ftell(infile); fseek(infile, 0, SEEK_END); ep = ftell(infile); fseek(infile, cp, SEEK_SET); size = ep-cp; Data = (uchar *)malloc(size); if (Data == NULL){ ErrFatal("could not allocate data for entire image"); } got = fread(Data, 1, size, infile); if (got != size){ ErrFatal("could not read the rest of the image"); } CheckSectionsAllocated(); Sections[SectionsRead].Data = Data; Sections[SectionsRead].Size = size; Sections[SectionsRead].Type = PSEUDO_IMAGE_MARKER; SectionsRead ++; HaveAll = 1; } return TRUE; case M_EOI: // in case it's a tables-only JPEG stream fprintf(stderr,"No image in jpeg!\n"); return FALSE; case M_COM: // Comment section if (HaveCom || ((ReadMode & READ_METADATA) == 0)){ // Discard this section. free(Sections[--SectionsRead].Data); }else{ process_COM(Data, itemlen); HaveCom = TRUE; } break; case M_JFIF: // Regular jpegs always have this tag, exif images have the exif // marker instead, althogh ACDsee will write images with both markers. // this program will re-create this marker on absence of exif marker. // hence no need to keep the copy from the file. free(Sections[--SectionsRead].Data); break; case M_EXIF: // There can be different section using the same marker. if (ReadMode & READ_METADATA){ if (memcmp(Data+2, "Exif", 4) == 0){ process_EXIF(Data, itemlen); break; }else if (memcmp(Data+2, "http:", 5) == 0){ Sections[SectionsRead-1].Type = M_XMP; // Change tag for internal purposes. if (ShowTags){ printf("Image cotains XMP section, %d bytes long\n", itemlen); if (ShowTags){ //ShowXmp(Sections[SectionsRead-1]); } } break; } } // Oterwise, discard this section. free(Sections[--SectionsRead].Data); break; case M_IPTC: if (ReadMode & READ_METADATA){ if (ShowTags){ printf("Image cotains IPTC section, %d bytes long\n", itemlen); } // Note: We just store the IPTC section. Its relatively straightforward // and we don't act on any part of it, so just display it at parse time. }else{ free(Sections[--SectionsRead].Data); } break; case M_SOF0: case M_SOF1: case M_SOF2: case M_SOF3: case M_SOF5: case M_SOF6: case M_SOF7: case M_SOF9: case M_SOF10: case M_SOF11: case M_SOF13: case M_SOF14: case M_SOF15: process_SOFn(Data, marker); break; default: // Skip any other sections. if (ShowTags){ printf("Jpeg section marker 0x%02x size %d\n",marker, itemlen); } break; } } return TRUE; } //-------------------------------------------------------------------------- // Discard read data. //-------------------------------------------------------------------------- void DiscardData(void) { int a; for (a=0;aData+ImageInfo.ThumbnailOffset+8; fwrite(ThumbnailPointer, ImageInfo.ThumbnailSize ,1, ThumbnailFile); fclose(ThumbnailFile); return TRUE; }else{ ErrFatal("Could not write thumbnail file"); return FALSE; } } //-------------------------------------------------------------------------- // Replace or remove exif thumbnail //-------------------------------------------------------------------------- int ReplaceThumbnail(const char * ThumbFileName) { FILE * ThumbnailFile; int ThumbLen, NewExifSize; Section_t * ExifSection; uchar * ThumbnailPointer; if (ImageInfo.ThumbnailOffset == 0 || ImageInfo.ThumbnailAtEnd == FALSE){ if (ThumbFileName == NULL){ // Delete of nonexistent thumbnail (not even pointers present) // No action, no error. return FALSE; } // Adding or removing of thumbnail is not possible - that would require rearranging // of the exif header, which is risky, and jhad doesn't know how to do. fprintf(stderr,"Image contains no thumbnail to replace - add is not possible\n"); return FALSE; } if (ThumbFileName){ ThumbnailFile = fopen(ThumbFileName,"rb"); if (ThumbnailFile == NULL){ ErrFatal("Could not read thumbnail file"); return FALSE; } // get length fseek(ThumbnailFile, 0, SEEK_END); ThumbLen = ftell(ThumbnailFile); fseek(ThumbnailFile, 0, SEEK_SET); if (ThumbLen + ImageInfo.ThumbnailOffset > 0x10000-20){ ErrFatal("Thumbnail is too large to insert into exif header"); } }else{ if (ImageInfo.ThumbnailSize == 0){ return FALSE; } ThumbLen = 0; ThumbnailFile = NULL; } ExifSection = FindSection(M_EXIF); NewExifSize = ImageInfo.ThumbnailOffset+8+ThumbLen; ExifSection->Data = (uchar *)realloc(ExifSection->Data, NewExifSize); ThumbnailPointer = ExifSection->Data+ImageInfo.ThumbnailOffset+8; if (ThumbnailFile){ fread(ThumbnailPointer, ThumbLen, 1, ThumbnailFile); fclose(ThumbnailFile); } ImageInfo.ThumbnailSize = ThumbLen; Put32u(ExifSection->Data+ImageInfo.ThumbnailSizeOffset+8, ThumbLen); ExifSection->Data[0] = (uchar)(NewExifSize >> 8); ExifSection->Data[1] = (uchar)NewExifSize; ExifSection->Size = NewExifSize; return TRUE; } //-------------------------------------------------------------------------- // Discard everything but the exif and comment sections. //-------------------------------------------------------------------------- void DiscardAllButExif(void) { Section_t ExifKeeper; Section_t CommentKeeper; Section_t IptcKeeper; Section_t XmpKeeper; int a; memset(&ExifKeeper, 0, sizeof(ExifKeeper)); memset(&CommentKeeper, 0, sizeof(CommentKeeper)); memset(&IptcKeeper, 0, sizeof(IptcKeeper)); memset(&XmpKeeper, 0, sizeof(IptcKeeper)); for (a=0;aNewIndex;a--){ Sections[a] = Sections[a-1]; } SectionsRead += 1; NewSection = Sections+NewIndex; NewSection->Type = SectionType; NewSection->Size = Size; NewSection->Data = Data; return NewSection; } #endif //-------------------------------------------------------------------------- // Initialisation. //-------------------------------------------------------------------------- void ResetJpgfile(void) { if (Sections == NULL){ Sections = (Section_t *)malloc(sizeof(Section_t)*5); SectionsAllocated = 5; } SectionsRead = 0; HaveAll = 0; } gpicview-0.2.4/src/Makefile.am0000644000000000000000000000171012231705732013045 00000000000000## Process this file with automake to produce Makefile.in # set the include path found by configure gpicview_CPPFLAGS = $(all_includes) \ $(X11_CFLAGS) \ $(GTK_CFLAGS) \ $(ADDITIONAL_FLAGS) \ -I$(top_srcdir) \ -DPACKAGE_DATA_DIR=\""$(datadir)"\" \ -DPACKAGE_LOCALE_DIR=\""$(prefix)/$(DATADIRNAME)/locale"\" bin_PROGRAMS = gpicview gpicview_SOURCES = \ gpicview.c \ image-list.c \ main-win.c \ image-view.c \ working-area.c \ ptk-menu.c \ file-dlgs.c \ jpeg-tran.c \ tran-supp.c \ pref.c \ jhead.c \ exif.c \ jpgfile.c # the library search path. # use -nodefaultlibs to prevent linking libstdc++ gpicview_LDADD = $(X11_LIBS) $(GTK_LIBS) -lm noinst_HEADERS = \ glib-mem.h \ image-list.h \ main-win.h \ image-view.h \ working-area.h \ ptk-menu.h \ file-dlgs.h \ jpeg-tran.h \ tran-supp.h \ pref.h \ jhead.h noinst_PROGRAMS=xml-purge xml_purge_SOURCES=xml-purge.c xml_purge_CFLAGS=@X11_CFLAGS@ xml_purge_LDADD=@X11_LIBS@ gpicview-0.2.4/src/main-win.c0000644000000000000000000015323512231705732012706 00000000000000/*************************************************************************** * Copyright (C) 2007, 2008 by PCMan (Hong Jen Yee) * * pcman.tw@gmail.com * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ #ifdef HAVE_CONFIG_H # include #endif #include "main-win.h" #include #include #include #include #include #include #include #include #include #include "pref.h" #include "image-view.h" #include "image-list.h" #include "working-area.h" #include "ptk-menu.h" #include "file-dlgs.h" #include "jpeg-tran.h" /* For drag & drop */ static GtkTargetEntry drop_targets[] = { {"text/uri-list", 0, 0}, {"text/plain", 0, 1} }; extern int ExifRotate(const char * fname, int new_angle); // defined in exif.c extern int ExifRotateFlipMapping[9][9]; static void main_win_init( MainWin*mw ); static void main_win_finalize( GObject* obj ); static void create_nav_bar( MainWin* mw, GtkWidget* box); GtkWidget* add_nav_btn( MainWin* mw, const char* icon, const char* tip, GCallback cb, gboolean toggle); GtkWidget* add_nav_btn_img( MainWin* mw, const char* icon, const char* tip, GCallback cb, gboolean toggle, GtkWidget** ret_img); // GtkWidget* add_menu_item( GtkMenuShell* menu, const char* label, const char* icon, GCallback cb, gboolean toggle=FALSE ); static void rotate_image( MainWin* mw, int angle ); static void show_popup_menu( MainWin* mw, GdkEventButton* evt ); /* signal handlers */ static gboolean on_delete_event( GtkWidget* widget, GdkEventAny* evt ); static void on_size_allocate( GtkWidget* widget, GtkAllocation *allocation ); static gboolean on_win_state_event( GtkWidget* widget, GdkEventWindowState* state ); static void on_scroll_size_allocate(GtkWidget* widget, GtkAllocation* allocation, MainWin* mv); static void on_zoom_fit( GtkToggleButton* btn, MainWin* mw ); static void on_zoom_fit_menu( GtkMenuItem* item, MainWin* mw ); static void on_full_screen( GtkWidget* btn, MainWin* mw ); static void on_next( GtkWidget* btn, MainWin* mw ); static void on_orig_size( GtkToggleButton* btn, MainWin* mw ); static void on_orig_size_menu( GtkToggleButton* btn, MainWin* mw ); static void on_prev( GtkWidget* btn, MainWin* mw ); static void on_rotate_auto_save( GtkWidget* btn, MainWin* mw ); static void on_rotate_clockwise( GtkWidget* btn, MainWin* mw ); static void on_rotate_counterclockwise( GtkWidget* btn, MainWin* mw ); static void on_save_as( GtkWidget* btn, MainWin* mw ); static void on_save( GtkWidget* btn, MainWin* mw ); static void cancel_slideshow(MainWin* mw); static gboolean next_slide(MainWin* mw); static void on_slideshow_menu( GtkMenuItem* item, MainWin* mw ); static void on_slideshow( GtkToggleButton* btn, MainWin* mw ); static void on_open( GtkWidget* btn, MainWin* mw ); static void on_zoom_in( GtkWidget* btn, MainWin* mw ); static void on_zoom_out( GtkWidget* btn, MainWin* mw ); static void on_preference( GtkWidget* btn, MainWin* mw ); static void on_toggle_toolbar( GtkMenuItem* item, MainWin* mw ); static void on_quit( GtkWidget* btn, MainWin* mw ); static gboolean on_button_press( GtkWidget* widget, GdkEventButton* evt, MainWin* mw ); static gboolean on_button_release( GtkWidget* widget, GdkEventButton* evt, MainWin* mw ); static gboolean on_mouse_move( GtkWidget* widget, GdkEventMotion* evt, MainWin* mw ); static gboolean on_scroll_event( GtkWidget* widget, GdkEventScroll* evt, MainWin* mw ); static gboolean on_key_press_event(GtkWidget* widget, GdkEventKey * key); static gboolean save_confirm( MainWin* mw, const char* file_path ); static void on_drag_data_received( GtkWidget* widget, GdkDragContext *drag_context, int x, int y, GtkSelectionData* data, guint info, guint time, MainWin* mw ); static void on_delete( GtkWidget* btn, MainWin* mw ); static void on_about( GtkWidget* menu, MainWin* mw ); static gboolean on_animation_timeout( MainWin* mw ); static void update_title(const char *filename, MainWin *mw ); void on_flip_vertical( GtkWidget* btn, MainWin* mw ); void on_flip_horizontal( GtkWidget* btn, MainWin* mw ); static int trans_angle_to_id(int i); static int get_new_angle( int orig_angle, int rotate_angle ); static void main_win_set_zoom_scale(MainWin* mw, double scale); static void main_win_set_zoom_mode(MainWin* mw, ZoomMode mode); static void main_win_update_zoom_buttons_state(MainWin* mw); // Begin of GObject-related stuff G_DEFINE_TYPE( MainWin, main_win, GTK_TYPE_WINDOW ) void main_win_class_init( MainWinClass* klass ) { GObjectClass * obj_class; GtkWidgetClass *widget_class; obj_class = ( GObjectClass * ) klass; // obj_class->set_property = _set_property; // obj_class->get_property = _get_property; obj_class->finalize = main_win_finalize; widget_class = GTK_WIDGET_CLASS ( klass ); widget_class->delete_event = on_delete_event; widget_class->size_allocate = on_size_allocate; widget_class->key_press_event = on_key_press_event; widget_class->window_state_event = on_win_state_event; } void main_win_finalize( GObject* obj ) { MainWin *mw = (MainWin*)obj; main_win_close(mw); if( G_LIKELY(mw->img_list) ) image_list_free( mw->img_list ); #if GTK_CHECK_VERSION(3, 0, 0) g_object_unref( mw->hand_cursor ); #else gdk_cursor_unref( mw->hand_cursor ); #endif // FIXME: Put this here is weird gtk_main_quit(); } GtkWidget* main_win_new() { return (GtkWidget*)g_object_new ( MAIN_WIN_TYPE, NULL ); } // End of GObject-related stuff void main_win_init( MainWin*mw ) { gtk_window_set_title( (GtkWindow*)mw, _("Image Viewer")); if (gtk_icon_theme_has_icon(gtk_icon_theme_get_default(), "gpicview")) { gtk_window_set_icon_name((GtkWindow*)mw, "gpicview"); } else { gtk_window_set_icon_from_file((GtkWindow*)mw, PACKAGE_DATA_DIR "/icons/hicolor/48x48/apps/gpicview.png", NULL); } gtk_window_set_default_size( (GtkWindow*)mw, 640, 480 ); #if GTK_CHECK_VERSION(3, 0, 0) GtkWidget* box = gtk_box_new( GTK_ORIENTATION_VERTICAL, 0 ); #else GtkWidget* box = gtk_vbox_new( FALSE, 0 ); #endif gtk_container_add( (GtkContainer*)mw, box); // image area mw->evt_box = gtk_event_box_new(); #if GTK_CHECK_VERSION(2, 18, 0) gtk_widget_set_can_focus(mw->evt_box,TRUE); #else GTK_WIDGET_SET_FLAGS( mw->evt_box, GTK_CAN_FOCUS ); #endif gtk_widget_add_events( mw->evt_box, GDK_POINTER_MOTION_MASK|GDK_BUTTON_PRESS_MASK| GDK_BUTTON_RELEASE_MASK|GDK_SCROLL_MASK ); g_signal_connect( mw->evt_box, "button-press-event", G_CALLBACK(on_button_press), mw ); g_signal_connect( mw->evt_box, "button-release-event", G_CALLBACK(on_button_release), mw ); g_signal_connect( mw->evt_box, "motion-notify-event", G_CALLBACK(on_mouse_move), mw ); g_signal_connect( mw->evt_box, "scroll-event", G_CALLBACK(on_scroll_event), mw ); // Set bg color to white gtk_widget_modify_bg( mw->evt_box, GTK_STATE_NORMAL, &pref.bg ); mw->img_view = image_view_new(); gtk_container_add( (GtkContainer*)mw->evt_box, (GtkWidget*)mw->img_view); #if GTK_CHECK_VERSION(3, 0, 0) #else const char scroll_style[]= "style \"gpicview-scroll\" {" "GtkScrolledWindow::scrollbar-spacing=0" "}" "class \"GtkScrolledWindow\" style \"gpicview-scroll\""; gtk_rc_parse_string( scroll_style ); #endif mw->scroll = gtk_scrolled_window_new( NULL, NULL ); g_signal_connect(G_OBJECT(mw->scroll), "size-allocate", G_CALLBACK(on_scroll_size_allocate), (gpointer) mw); gtk_scrolled_window_set_shadow_type( (GtkScrolledWindow*)mw->scroll, GTK_SHADOW_NONE ); gtk_scrolled_window_set_policy((GtkScrolledWindow*)mw->scroll, GTK_POLICY_AUTOMATIC, GTK_POLICY_AUTOMATIC); GtkAdjustment *hadj, *vadj; hadj = gtk_scrolled_window_get_hadjustment((GtkScrolledWindow*)mw->scroll); #if GTK_CHECK_VERSION(2, 14, 0) gtk_adjustment_set_page_increment(hadj, 10); #else hadj->page_increment = 10; #endif gtk_adjustment_changed(hadj); vadj = gtk_scrolled_window_get_vadjustment((GtkScrolledWindow*)mw->scroll); #if GTK_CHECK_VERSION(2, 14, 0) gtk_adjustment_set_page_increment(vadj, 10); #else vadj->page_increment = 10; #endif gtk_adjustment_changed(vadj); image_view_set_adjustments( IMAGE_VIEW(mw->img_view), hadj, vadj ); // dirty hack :-( gtk_scrolled_window_add_with_viewport( (GtkScrolledWindow*)mw->scroll, mw->evt_box ); GtkWidget* viewport = gtk_bin_get_child( (GtkBin*)mw->scroll ); gtk_viewport_set_shadow_type( (GtkViewport*)viewport, GTK_SHADOW_NONE ); gtk_container_set_border_width( (GtkContainer*)viewport, 0 ); gtk_box_pack_start( (GtkBox*)box, mw->scroll, TRUE, TRUE, 0 ); // build toolbar create_nav_bar( mw, box ); gtk_widget_show_all( box ); if (pref.show_toolbar) gtk_widget_show(gtk_widget_get_parent(mw->nav_bar)); else gtk_widget_hide(gtk_widget_get_parent(mw->nav_bar)); mw->hand_cursor = gdk_cursor_new_for_display( gtk_widget_get_display((GtkWidget*)mw), GDK_FLEUR ); // zoom_mode = ZOOM_NONE; mw->zoom_mode = ZOOM_FIT; // Set up drag & drop gtk_drag_dest_set( (GtkWidget*)mw, GTK_DEST_DEFAULT_ALL, drop_targets, G_N_ELEMENTS(drop_targets), GDK_ACTION_COPY | GDK_ACTION_ASK ); g_signal_connect( mw, "drag-data-received", G_CALLBACK(on_drag_data_received), mw ); mw->img_list = image_list_new(); // rotation angle is zero on startup mw->rotation_angle = 0; } void create_nav_bar( MainWin* mw, GtkWidget* box ) { mw->nav_bar = gtk_hbox_new( FALSE, 0 ); add_nav_btn( mw, GTK_STOCK_GO_BACK, _("Previous"), G_CALLBACK(on_prev), FALSE ); add_nav_btn( mw, GTK_STOCK_GO_FORWARD, _("Next"), G_CALLBACK(on_next), FALSE ); mw->btn_play_stop = add_nav_btn_img( mw, GTK_STOCK_MEDIA_PLAY, _("Start Slideshow"), G_CALLBACK(on_slideshow), TRUE, &mw->img_play_stop ); gtk_box_pack_start( (GtkBox*)mw->nav_bar, gtk_vseparator_new(), FALSE, FALSE, 0 ); add_nav_btn( mw, GTK_STOCK_ZOOM_OUT, _("Zoom Out"), G_CALLBACK(on_zoom_out), FALSE ); add_nav_btn( mw, GTK_STOCK_ZOOM_IN, _("Zoom In"), G_CALLBACK(on_zoom_in), FALSE ); // percent = gtk_entry_new(); // show scale (in percentage) // g_signal_connect( percent, "activate", G_CALLBACK(on_percentage), mw ); // gtk_widget_set_size_request( percent, 45, -1 ); // gtk_box_pack_start( (GtkBox*)nav_bar, percent, FALSE, FALSE, 2 ); mw->btn_fit = add_nav_btn( mw, GTK_STOCK_ZOOM_FIT, _("Fit Image To Window Size"), G_CALLBACK(on_zoom_fit), TRUE ); mw->btn_orig = add_nav_btn( mw, GTK_STOCK_ZOOM_100, _("Original Size"), G_CALLBACK(on_orig_size), TRUE ); gtk_toggle_button_set_active( (GtkToggleButton*)mw->btn_fit, TRUE ); #ifndef GTK_STOCK_FULLSCREEN #define GTK_STOCK_FULLSCREEN "gtk-fullscreen" #endif add_nav_btn( mw, GTK_STOCK_FULLSCREEN, _("Full Screen"), G_CALLBACK(on_full_screen), FALSE ); // gtk+ 2.8+ gtk_box_pack_start( (GtkBox*)mw->nav_bar, gtk_vseparator_new(), FALSE, FALSE, 0 ); mw->btn_rotate_ccw = add_nav_btn( mw, "object-rotate-left", _("Rotate Counterclockwise"), G_CALLBACK(on_rotate_counterclockwise), FALSE ); mw->btn_rotate_cw = add_nav_btn( mw, "object-rotate-right", _("Rotate Clockwise"), G_CALLBACK(on_rotate_clockwise), FALSE ); mw->btn_flip_h = add_nav_btn( mw, "object-flip-horizontal", _("Flip Horizontal"), G_CALLBACK(on_flip_horizontal), FALSE ); mw->btn_flip_v = add_nav_btn( mw, "object-flip-vertical", _("Flip Vertical"), G_CALLBACK(on_flip_vertical), FALSE ); gtk_box_pack_start( (GtkBox*)mw->nav_bar, gtk_vseparator_new(), FALSE, FALSE, 0 ); add_nav_btn( mw, GTK_STOCK_OPEN, _("Open File"), G_CALLBACK(on_open), FALSE ); add_nav_btn( mw, GTK_STOCK_SAVE, _("Save File"), G_CALLBACK(on_save), FALSE ); add_nav_btn( mw, GTK_STOCK_SAVE_AS, _("Save File As"), G_CALLBACK(on_save_as), FALSE ); add_nav_btn( mw, GTK_STOCK_DELETE, _("Delete File"), G_CALLBACK(on_delete), FALSE ); gtk_box_pack_start( (GtkBox*)mw->nav_bar, gtk_vseparator_new(), FALSE, FALSE, 0 ); add_nav_btn( mw, GTK_STOCK_PREFERENCES, _("Preferences"), G_CALLBACK(on_preference), FALSE ); add_nav_btn( mw, GTK_STOCK_QUIT, _("Quit"), G_CALLBACK(on_quit), FALSE ); GtkWidget* align = gtk_alignment_new( 0.5, 0, 0, 0 ); gtk_container_add( (GtkContainer*)align, mw->nav_bar ); gtk_box_pack_start( (GtkBox*)box, align, FALSE, TRUE, 2 ); } gboolean on_delete_event( GtkWidget* widget, GdkEventAny* evt ) { gtk_widget_destroy( widget ); return TRUE; } static void update_title(const char *filename, MainWin *mw ) { static char fname[50]; static int wid, hei; char buf[100]; if(filename != NULL) { strncpy(fname, filename, 49); fname[49] = '\0'; wid = gdk_pixbuf_get_width( mw->pix ); hei = gdk_pixbuf_get_height( mw->pix ); } snprintf(buf, 100, "%s (%dx%d) %d%%", fname, wid, hei, (int)(mw->scale * 100)); gtk_window_set_title( (GtkWindow*)mw, buf ); return; } gboolean on_animation_timeout( MainWin* mw ) { int delay; if ( gdk_pixbuf_animation_iter_advance( mw->animation_iter, NULL ) ) { mw->pix = gdk_pixbuf_animation_iter_get_pixbuf( mw->animation_iter ); image_view_set_pixbuf( (ImageView*)mw->img_view, mw->pix ); } delay = gdk_pixbuf_animation_iter_get_delay_time( mw->animation_iter ); mw->animation_timeout = g_timeout_add(delay, (GSourceFunc) on_animation_timeout, mw ); return FALSE; } static void update_btns(MainWin* mw) { gboolean enable = (mw->animation == NULL); gtk_widget_set_sensitive(mw->btn_rotate_cw, enable); gtk_widget_set_sensitive(mw->btn_rotate_ccw, enable); gtk_widget_set_sensitive(mw->btn_flip_v, enable); gtk_widget_set_sensitive(mw->btn_flip_h, enable); } gboolean main_win_open( MainWin* mw, const char* file_path, ZoomMode zoom ) { if (g_file_test(file_path, G_FILE_TEST_IS_DIR)) { image_list_open_dir( mw->img_list, file_path, NULL ); image_list_sort_by_name( mw->img_list, GTK_SORT_DESCENDING ); if (image_list_get_first(mw->img_list)) main_win_open(mw, image_list_get_current_file_path(mw->img_list), zoom); return; } GError* err = NULL; GdkPixbufFormat* info; info = gdk_pixbuf_get_file_info( file_path, NULL, NULL ); char* type = ((info != NULL) ? gdk_pixbuf_format_get_name(info) : ""); main_win_close( mw ); /* grabs a file as if it were an animation */ mw->animation = gdk_pixbuf_animation_new_from_file( file_path, &err ); if( ! mw->animation ) { main_win_show_error( mw, err->message ); g_error_free(err); update_btns( mw ); return FALSE; } /* tests if the file is actually just a normal picture */ if ( gdk_pixbuf_animation_is_static_image( mw->animation ) ) { mw->pix = gdk_pixbuf_animation_get_static_image( mw->animation ); g_object_ref(mw->pix); g_object_unref(mw->animation); mw->animation = NULL; } else { int delay; /* we found an animation */ mw->animation_iter = gdk_pixbuf_animation_get_iter( mw->animation, NULL ); mw->pix = gdk_pixbuf_animation_iter_get_pixbuf( mw->animation_iter ); delay = gdk_pixbuf_animation_iter_get_delay_time( mw->animation_iter ); mw->animation_timeout = g_timeout_add( delay, (GSourceFunc) on_animation_timeout, mw ); } update_btns( mw ); if(!strcmp(type,"jpeg")) { GdkPixbuf* tmp; // Only jpeg should rotate by EXIF tmp = gdk_pixbuf_apply_embedded_orientation(mw->pix); g_object_unref(mw->pix); mw->pix = tmp; } mw->zoom_mode = zoom; // select most suitable viewing mode if( zoom == ZOOM_NONE ) { int w = gdk_pixbuf_get_width( mw->pix ); int h = gdk_pixbuf_get_height( mw->pix ); GdkRectangle area; get_working_area( gtk_widget_get_screen((GtkWidget*)mw), &area ); // g_debug("determine best zoom mode: orig size: w=%d, h=%d", w, h); // FIXME: actually this is a little buggy :-( if( w < area.width && h < area.height && (w >= 640 || h >= 480) ) { gtk_scrolled_window_set_policy( (GtkScrolledWindow*)mw->scroll, GTK_POLICY_NEVER, GTK_POLICY_NEVER ); gtk_widget_set_size_request( (GtkWidget*)mw->img_view, w, h ); GtkRequisition req; gtk_widget_size_request ( (GtkWidget*)mw, &req ); if( req.width < 640 ) req.width = 640; if( req.height < 480 ) req.height = 480; gtk_window_resize( (GtkWindow*)mw, req.width, req.height ); gtk_widget_set_size_request( (GtkWidget*)mw->img_view, -1, -1 ); gtk_scrolled_window_set_policy( (GtkScrolledWindow*)mw->scroll, GTK_POLICY_AUTOMATIC, GTK_POLICY_AUTOMATIC ); mw->zoom_mode = ZOOM_ORIG; mw->scale = 1.0; } else mw->zoom_mode = ZOOM_FIT; } if( mw->zoom_mode == ZOOM_FIT ) { main_win_fit_window_size( mw, FALSE, GDK_INTERP_BILINEAR ); } else if( mw->zoom_mode == ZOOM_SCALE ) // scale { main_win_scale_image( mw, mw->scale, GDK_INTERP_BILINEAR ); } else if( mw->zoom_mode == ZOOM_ORIG ) // original size { image_view_set_scale( (ImageView*)mw->img_view, mw->scale, GDK_INTERP_BILINEAR ); main_win_center_image( mw ); } image_view_set_pixbuf( (ImageView*)mw->img_view, mw->pix ); // while (gtk_events_pending ()) // gtk_main_iteration (); // build file list char* dir_path = g_path_get_dirname( file_path ); image_list_open_dir( mw->img_list, dir_path, NULL ); image_list_sort_by_name( mw->img_list, GTK_SORT_DESCENDING ); g_free( dir_path ); char* base_name = g_path_get_basename( file_path ); image_list_set_current( mw->img_list, base_name ); char* disp_name = g_filename_display_name( base_name ); g_free( base_name ); update_title( disp_name, mw ); g_free( disp_name ); main_win_update_zoom_buttons_state(mw); return TRUE; } void main_win_start_slideshow( MainWin* mw ) { on_slideshow_menu(NULL, mw); } void main_win_close( MainWin* mw ) { if( mw->animation ) { g_object_unref( mw->animation ); mw->animation = NULL; if( mw->animation_timeout ); { g_source_remove( mw->animation_timeout ); mw->animation_timeout = 0; } } else if( mw->pix ) { g_object_unref( mw->pix ); } mw->pix = NULL; } void main_win_show_error( MainWin* mw, const char* message ) { GtkWidget* dlg = gtk_message_dialog_new( (GtkWindow*)mw, GTK_DIALOG_MODAL, GTK_MESSAGE_ERROR, GTK_BUTTONS_OK, "%s", message ); gtk_dialog_run( (GtkDialog*)dlg ); gtk_widget_destroy( dlg ); } void on_size_allocate( GtkWidget* widget, GtkAllocation *allocation ) { GTK_WIDGET_CLASS(main_win_parent_class)->size_allocate( widget, allocation ); #if GTK_CHECK_VERSION(2, 20, 0) if(gtk_widget_get_realized (widget) ) #else if( GTK_WIDGET_REALIZED (widget) ) #endif { MainWin* mw = (MainWin*)widget; if( mw->zoom_mode == ZOOM_FIT ) { while(gtk_events_pending ()) gtk_main_iteration(); // makes it more fluid main_win_fit_window_size( mw, FALSE, GDK_INTERP_BILINEAR ); } } } gboolean on_win_state_event( GtkWidget* widget, GdkEventWindowState* state ) { MainWin* mw = (MainWin*)widget; if( state->new_window_state == GDK_WINDOW_STATE_FULLSCREEN ) { gtk_widget_modify_bg( mw->evt_box, GTK_STATE_NORMAL, &pref.bg_full ); gtk_widget_hide( gtk_widget_get_parent(mw->nav_bar) ); mw->full_screen = TRUE; } else { gtk_widget_modify_bg( mw->evt_box, GTK_STATE_NORMAL, &pref.bg ); if (pref.show_toolbar) gtk_widget_show( gtk_widget_get_parent(mw->nav_bar) ); mw->full_screen = FALSE; } int previous = pref.open_maximized; pref.open_maximized = (state->new_window_state == GDK_WINDOW_STATE_MAXIMIZED); if (previous != pref.open_maximized) save_preferences(); return TRUE; } void main_win_fit_size( MainWin* mw, int width, int height, gboolean can_strech, GdkInterpType type ) { if( ! mw->pix ) return; int orig_w = gdk_pixbuf_get_width( mw->pix ); int orig_h = gdk_pixbuf_get_height( mw->pix ); if( can_strech || (orig_w > width || orig_h > height) ) { gdouble xscale = ((gdouble)width) / orig_w; gdouble yscale = ((gdouble)height)/ orig_h; gdouble final_scale = xscale < yscale ? xscale : yscale; main_win_scale_image( mw, final_scale, type ); } else // use original size if the image is smaller than the window { mw->scale = 1.0; image_view_set_scale( (ImageView*)mw->img_view, 1.0, type ); update_title(NULL, mw); } } void main_win_fit_window_size( MainWin* mw, gboolean can_strech, GdkInterpType type ) { mw->zoom_mode = ZOOM_FIT; if( mw->pix == NULL ) return; main_win_fit_size( mw, mw->scroll_allocation.width, mw->scroll_allocation.height, can_strech, type ); } GtkWidget* add_nav_btn( MainWin* mw, const char* icon, const char* tip, GCallback cb, gboolean toggle) { GtkWidget* unused; return add_nav_btn_img(mw, icon, tip, cb, toggle, &unused); } GtkWidget* add_nav_btn_img( MainWin* mw, const char* icon, const char* tip, GCallback cb, gboolean toggle, GtkWidget** ret_img ) { GtkWidget* img; if( g_str_has_prefix(icon, "gtk-") ) img = gtk_image_new_from_stock(icon, GTK_ICON_SIZE_SMALL_TOOLBAR); else img = gtk_image_new_from_icon_name(icon, GTK_ICON_SIZE_SMALL_TOOLBAR); GtkWidget* btn; if( G_UNLIKELY(toggle) ) { btn = gtk_toggle_button_new(); g_signal_connect( btn, "toggled", cb, mw ); } else { btn = gtk_button_new(); g_signal_connect( btn, "clicked", cb, mw ); } gtk_button_set_relief( (GtkButton*)btn, GTK_RELIEF_NONE ); gtk_button_set_focus_on_click( (GtkButton*)btn, FALSE ); gtk_container_add( (GtkContainer*)btn, img ); gtk_widget_set_tooltip_text( btn, tip ); gtk_box_pack_start( (GtkBox*)mw->nav_bar, btn, FALSE, FALSE, 0 ); *ret_img = img; return btn; } void on_scroll_size_allocate(GtkWidget* widget, GtkAllocation* allocation, MainWin* mv) { mv->scroll_allocation = *allocation; } void on_zoom_fit_menu( GtkMenuItem* item, MainWin* mw ) { gtk_button_clicked( (GtkButton*)mw->btn_fit ); } void on_zoom_fit( GtkToggleButton* btn, MainWin* mw ) { if (gtk_toggle_button_get_active(GTK_TOGGLE_BUTTON(btn))) main_win_set_zoom_mode(mw, ZOOM_FIT); } void on_full_screen( GtkWidget* btn, MainWin* mw ) { if( ! mw->full_screen ) gtk_window_fullscreen( (GtkWindow*)mw ); else gtk_window_unfullscreen( (GtkWindow*)mw ); } void on_orig_size_menu( GtkToggleButton* btn, MainWin* mw ) { gtk_button_clicked( (GtkButton*)mw->btn_orig ); } void on_orig_size( GtkToggleButton* btn, MainWin* mw ) { // this callback could be called from activate signal of menu item. if( GTK_IS_MENU_ITEM(btn) ) { gtk_button_clicked( (GtkButton*)mw->btn_orig ); return; } if (gtk_toggle_button_get_active(GTK_TOGGLE_BUTTON(btn))) main_win_set_zoom_mode(mw, ZOOM_ORIG); } void on_prev( GtkWidget* btn, MainWin* mw ) { const char* name; if( image_list_is_empty( mw->img_list ) ) return; name = image_list_get_prev( mw->img_list ); if( ! name && image_list_has_multiple_files( mw->img_list ) ) { // FIXME: need to ask user first? name = image_list_get_last( mw->img_list ); } if( name ) { char* file_path = image_list_get_current_file_path( mw->img_list ); main_win_open( mw, file_path, mw->zoom_mode ); g_free( file_path ); } } void on_next( GtkWidget* btn, MainWin* mw ) { if( image_list_is_empty( mw->img_list ) ) return; const char* name = image_list_get_next( mw->img_list ); if( ! name && image_list_has_multiple_files( mw->img_list ) ) { // FIXME: need to ask user first? name = image_list_get_first( mw->img_list ); } if( name ) { char* file_path = image_list_get_current_file_path( mw->img_list ); main_win_open( mw, file_path, mw->zoom_mode ); g_free( file_path ); } } void cancel_slideshow(MainWin* mw) { mw->slideshow_cancelled = TRUE; mw->slideshow_running = FALSE; if (mw->slide_timeout != 0) g_source_remove(mw->slide_timeout); gtk_toggle_button_set_active( GTK_TOGGLE_BUTTON(mw->btn_play_stop), FALSE ); } gboolean next_slide(MainWin* mw) { /* Timeout causes an implicit "Next". */ if (mw->slideshow_running) on_next( NULL, mw ); return mw->slideshow_running; } void on_slideshow_menu( GtkMenuItem* item, MainWin* mw ) { gtk_button_clicked( (GtkButton*)mw->btn_play_stop ); } void on_slideshow( GtkToggleButton* btn, MainWin* mw ) { if ((mw->slideshow_running) || (mw->slideshow_cancelled)) { mw->slideshow_running = FALSE; mw->slideshow_cancelled = FALSE; gtk_image_set_from_stock( GTK_IMAGE(mw->img_play_stop), GTK_STOCK_MEDIA_PLAY, GTK_ICON_SIZE_SMALL_TOOLBAR ); gtk_widget_set_tooltip_text( GTK_WIDGET(btn), _("Start Slideshow") ); gtk_toggle_button_set_active( btn, FALSE ); } else { gtk_toggle_button_set_active( btn, TRUE ); mw->slideshow_running = TRUE; gtk_image_set_from_stock( GTK_IMAGE(mw->img_play_stop), GTK_STOCK_MEDIA_STOP, GTK_ICON_SIZE_SMALL_TOOLBAR ); gtk_widget_set_tooltip_text( GTK_WIDGET(btn), _("Stop Slideshow") ); mw->slide_timeout = g_timeout_add(1000 * pref.slide_delay, (GSourceFunc) next_slide, mw); } } //////////////////// rotate & flip static int trans_angle_to_id(int i) { if(i == 0) return 1; else if(i == 90) return 6; else if(i == 180) return 3; else if(i == 270) return 8; else if(i == -45) return 7; else if(i == -90) return 2; else if(i == -135) return 5; else /* -180 */ return 4; } static int get_new_angle( int orig_angle, int rotate_angle ) { // defined in exif.c static int angle_trans_back[] = {0, 0, -90, 180, -180, -135, 90, -45, 270}; orig_angle = trans_angle_to_id(orig_angle); rotate_angle = trans_angle_to_id(rotate_angle); return angle_trans_back[ ExifRotateFlipMapping[orig_angle][rotate_angle] ]; } void on_rotate_auto_save( GtkWidget* btn, MainWin* mw ) { if(pref.auto_save_rotated){ // gboolean ask_before_save = pref.ask_before_save; // pref.ask_before_save = FALSE; on_save(btn,mw); // pref.ask_before_save = ask_before_save; } } void on_rotate_clockwise( GtkWidget* btn, MainWin* mw ) { cancel_slideshow(mw); rotate_image( mw, GDK_PIXBUF_ROTATE_CLOCKWISE ); mw->rotation_angle = get_new_angle(mw->rotation_angle, 90); on_rotate_auto_save(btn, mw); } void on_rotate_counterclockwise( GtkWidget* btn, MainWin* mw ) { cancel_slideshow(mw); rotate_image( mw, GDK_PIXBUF_ROTATE_COUNTERCLOCKWISE ); mw->rotation_angle = get_new_angle(mw->rotation_angle, 270); on_rotate_auto_save(btn, mw); } void on_flip_vertical( GtkWidget* btn, MainWin* mw ) { cancel_slideshow(mw); rotate_image( mw, -180 ); mw->rotation_angle = get_new_angle(mw->rotation_angle, -180); on_rotate_auto_save(btn, mw); } void on_flip_horizontal( GtkWidget* btn, MainWin* mw ) { cancel_slideshow(mw); rotate_image( mw, -90 ); mw->rotation_angle = get_new_angle(mw->rotation_angle, -90); on_rotate_auto_save(btn, mw); } /* end of rotate & flip */ void on_save_as( GtkWidget* btn, MainWin* mw ) { char *file, *type; cancel_slideshow(mw); if( ! mw->pix ) return; file = get_save_filename( GTK_WINDOW(mw), image_list_get_dir( mw->img_list ), &type ); if( file ) { char* dir; main_win_save( mw, file, type, TRUE ); dir = g_path_get_dirname(file); const char* name = file + strlen(dir) + 1; if( strcmp( image_list_get_dir(mw->img_list), dir ) == 0 ) { /* if the saved file is located in the same dir */ /* simply add it to image list */ image_list_add_sorted( mw->img_list, name, TRUE ); } else /* otherwise reload the whole image list. */ { /* switch to the dir containing the saved file. */ image_list_open_dir( mw->img_list, dir, NULL ); } update_title( name, mw ); g_free( dir ); g_free( file ); g_free( type ); } } void on_save( GtkWidget* btn, MainWin* mw ) { cancel_slideshow(mw); if( ! mw->pix ) return; char* file_name = g_build_filename( image_list_get_dir( mw->img_list ), image_list_get_current( mw->img_list ), NULL ); GdkPixbufFormat* info; info = gdk_pixbuf_get_file_info( file_name, NULL, NULL ); char* type = gdk_pixbuf_format_get_name( info ); /* Confirm save if requested. */ if ((pref.ask_before_save) && ( ! save_confirm(mw, file_name))) return; if(strcmp(type,"jpeg")==0) { if(!pref.rotate_exif_only || ExifRotate(file_name, mw->rotation_angle) == FALSE) { // hialan notes: // ExifRotate retrun FALSE when // 1. Can not read file // 2. Exif do not have TAG_ORIENTATION tag // 3. Format unknown // And then we apply rotate_and_save_jpeg_lossless() , // the result would not effected by EXIF Orientation... #ifdef HAVE_LIBJPEG int status = rotate_and_save_jpeg_lossless(file_name,mw->rotation_angle); if(status != 0) { main_win_show_error( mw, g_strerror(status) ); } #else main_win_save( mw, file_name, type, pref.ask_before_save ); #endif } } else main_win_save( mw, file_name, type, pref.ask_before_save ); mw->rotation_angle = 0; g_free( file_name ); g_free( type ); } void on_open( GtkWidget* btn, MainWin* mw ) { cancel_slideshow(mw); char* file = get_open_filename( (GtkWindow*)mw, image_list_get_dir( mw->img_list ) ); if( file ) { main_win_open( mw, file, ZOOM_NONE ); g_free( file ); } } void on_zoom_in( GtkWidget* btn, MainWin* mw ) { double scale = mw->scale; scale *= 1.05; main_win_set_zoom_scale(mw, scale); } void on_zoom_out( GtkWidget* btn, MainWin* mw ) { double scale = mw->scale; scale /= 1.05; main_win_set_zoom_scale(mw, scale); } void on_preference( GtkWidget* btn, MainWin* mw ) { edit_preferences( (GtkWindow*)mw ); } void on_quit( GtkWidget* btn, MainWin* mw ) { cancel_slideshow(mw); gtk_widget_destroy( (GtkWidget*)mw ); } gboolean on_button_press( GtkWidget* widget, GdkEventButton* evt, MainWin* mw ) { #if GTK_CHECK_VERSION(2, 14, 0) if( ! gtk_widget_has_focus( widget ) ) #else if( ! GTK_WIDGET_HAS_FOCUS( widget ) ) #endif gtk_widget_grab_focus( widget ); if( evt->type == GDK_BUTTON_PRESS) { if( evt->button == 1 ) // left button { if( ! mw->pix ) return FALSE; mw->dragging = TRUE; gtk_widget_get_pointer( (GtkWidget*)mw, &mw->drag_old_x ,&mw->drag_old_y ); gdk_window_set_cursor( gtk_widget_get_window(widget), mw->hand_cursor ); } else if( evt->button == 3 ) // right button { show_popup_menu( mw, evt ); } } else if( evt->type == GDK_2BUTTON_PRESS && evt->button == 1 ) // double clicked { on_full_screen( NULL, mw ); } return FALSE; } gboolean on_mouse_move( GtkWidget* widget, GdkEventMotion* evt, MainWin* mw ) { if( ! mw->dragging ) return FALSE; int cur_x, cur_y; gtk_widget_get_pointer( (GtkWidget*)mw, &cur_x ,&cur_y ); int dx = (mw->drag_old_x - cur_x); int dy = (mw->drag_old_y - cur_y); GtkAdjustment *hadj, *vadj; hadj = gtk_scrolled_window_get_hadjustment((GtkScrolledWindow*)mw->scroll); vadj = gtk_scrolled_window_get_vadjustment((GtkScrolledWindow*)mw->scroll); GtkRequisition req; gtk_widget_size_request( (GtkWidget*)mw->img_view, &req ); #if GTK_CHECK_VERSION(2, 14, 0) gdouble hadj_page_size = gtk_adjustment_get_page_size(hadj); gdouble hadj_lower = gtk_adjustment_get_lower(hadj); gdouble hadj_upper = gtk_adjustment_get_upper(hadj); #else gdouble hadj_page_size = hadj->page_size; gdouble hadj_lower = hadj->lower; gdouble hadj_upper = hadj->upper; #endif if( ABS(dx) > 4 ) { mw->drag_old_x = cur_x; if( req.width > hadj_page_size ) { gdouble value = gtk_adjustment_get_value (hadj); gdouble x = value + dx; if( x < hadj_lower ) x = hadj_lower; else if( (x + hadj_page_size) > hadj_upper ) x = hadj_upper - hadj_page_size; if( x != value ) gtk_adjustment_set_value (hadj, x ); } } #if GTK_CHECK_VERSION(2, 14, 0) gdouble vadj_page_size = gtk_adjustment_get_page_size(vadj); gdouble vadj_lower = gtk_adjustment_get_lower(vadj); gdouble vadj_upper = gtk_adjustment_get_upper(vadj); #else gdouble vadj_page_size = vadj->page_size; gdouble vadj_lower = vadj->lower; gdouble vadj_upper = vadj->upper; #endif if( ABS(dy) > 4 ) { if( req.height > vadj_page_size ) { mw->drag_old_y = cur_y; gdouble value = gtk_adjustment_get_value (vadj); gdouble y = value + dy; if( y < vadj_lower ) y = vadj_lower; else if( (y + vadj_page_size) > vadj_upper ) y = vadj_upper - vadj_page_size; if( y != value ) gtk_adjustment_set_value (vadj, y ); } } return FALSE; } gboolean on_button_release( GtkWidget* widget, GdkEventButton* evt, MainWin* mw ) { mw->dragging = FALSE; gdk_window_set_cursor( gtk_widget_get_window(widget), NULL ); return FALSE; } gboolean on_scroll_event( GtkWidget* widget, GdkEventScroll* evt, MainWin* mw ) { guint modifiers = gtk_accelerator_get_default_mod_mask(); switch( evt->direction ) { case GDK_SCROLL_UP: if ((evt->state & modifiers) == GDK_CONTROL_MASK) on_zoom_in( NULL, mw ); else on_prev( NULL, mw ); break; case GDK_SCROLL_DOWN: if ((evt->state & modifiers) == GDK_CONTROL_MASK) on_zoom_out( NULL, mw ); else on_next( NULL, mw ); break; case GDK_SCROLL_LEFT: if( gtk_widget_get_default_direction () == GTK_TEXT_DIR_RTL ) on_next( NULL, mw ); else on_prev( NULL, mw ); break; case GDK_SCROLL_RIGHT: if( gtk_widget_get_default_direction () == GTK_TEXT_DIR_RTL ) on_prev( NULL, mw ); else on_next( NULL, mw ); break; } return TRUE; } gboolean on_key_press_event(GtkWidget* widget, GdkEventKey * key) { MainWin* mw = (MainWin*)widget; switch( key->keyval ) { case GDK_Right: case GDK_KP_Right: case GDK_rightarrow: if( gtk_widget_get_default_direction () == GTK_TEXT_DIR_RTL ) on_prev( NULL, mw ); else on_next( NULL, mw ); break; case GDK_Return: case GDK_space: case GDK_Next: case GDK_KP_Down: case GDK_Down: case GDK_downarrow: on_next( NULL, mw ); break; case GDK_Left: case GDK_KP_Left: case GDK_leftarrow: if( gtk_widget_get_default_direction () == GTK_TEXT_DIR_RTL ) on_next( NULL, mw ); else on_prev( NULL, mw ); break; case GDK_Prior: case GDK_BackSpace: case GDK_KP_Up: case GDK_Up: case GDK_uparrow: on_prev( NULL, mw ); break; case GDK_w: case GDK_W: on_slideshow_menu( NULL, mw ); break; case GDK_KP_Add: case GDK_plus: case GDK_equal: on_zoom_in( NULL, mw ); break; case GDK_KP_Subtract: case GDK_minus: on_zoom_out( NULL, mw ); break; case GDK_s: case GDK_S: on_save( NULL, mw ); break; case GDK_a: case GDK_A: on_save_as( NULL, mw ); break; case GDK_l: case GDK_L: on_rotate_counterclockwise( NULL, mw ); break; case GDK_r: case GDK_R: on_rotate_clockwise( NULL, mw ); break; case GDK_f: case GDK_F: if( mw->zoom_mode != ZOOM_FIT ) gtk_button_clicked((GtkButton*)mw->btn_fit ); break; case GDK_g: case GDK_G: if( mw->zoom_mode != ZOOM_ORIG ) gtk_button_clicked((GtkButton*)mw->btn_orig ); break; case GDK_h: case GDK_H: on_flip_horizontal( NULL, mw ); break; case GDK_v: case GDK_V: on_flip_vertical( NULL, mw ); break; case GDK_o: case GDK_O: on_open( NULL, mw ); break; case GDK_Delete: case GDK_d: case GDK_D: on_delete( NULL, mw ); break; case GDK_p: case GDK_P: on_preference( NULL, mw ); break; case GDK_t: case GDK_T: on_toggle_toolbar( NULL, mw ); break; case GDK_Escape: if( mw->full_screen ) on_full_screen( NULL, mw ); else on_quit( NULL, mw ); break; case GDK_q: case GDK_Q: on_quit( NULL, mw ); break; case GDK_F11: on_full_screen( NULL, mw ); break; default: GTK_WIDGET_CLASS(main_win_parent_class)->key_press_event( widget, key ); } return FALSE; } void main_win_center_image( MainWin* mw ) { GtkAdjustment *hadj, *vadj; hadj = gtk_scrolled_window_get_hadjustment((GtkScrolledWindow*)mw->scroll); vadj = gtk_scrolled_window_get_vadjustment((GtkScrolledWindow*)mw->scroll); GtkRequisition req; gtk_widget_size_request( (GtkWidget*)mw->img_view, &req ); #if GTK_CHECK_VERSION(2, 14, 0) gdouble hadj_page_size = gtk_adjustment_get_page_size(hadj); gdouble hadj_upper = gtk_adjustment_get_upper(hadj); #else gdouble hadj_page_size = hadj->page_size; gdouble hadj_upper = hadj->upper; #endif if( req.width > hadj_page_size ) gtk_adjustment_set_value(hadj, ( hadj_upper - hadj_page_size ) / 2 ); #if GTK_CHECK_VERSION(2, 14, 0) gdouble vadj_page_size = gtk_adjustment_get_page_size(vadj); gdouble vadj_upper = gtk_adjustment_get_upper(vadj); #else gdouble vadj_page_size = vadj->page_size; gdouble vadj_upper = vadj->upper; #endif if( req.height > vadj_page_size ) gtk_adjustment_set_value(vadj, ( vadj_upper - vadj_page_size ) / 2 ); } void rotate_image( MainWin* mw, int angle ) { GdkPixbuf* rpix = NULL; if( ! mw->pix ) return; if(angle > 0) { rpix = gdk_pixbuf_rotate_simple( mw->pix, angle ); } else { if(angle == -90) rpix = gdk_pixbuf_flip( mw->pix, TRUE ); else if(angle == -180) rpix = gdk_pixbuf_flip( mw->pix, FALSE ); } if (!rpix) { return; } g_object_unref( mw->pix ); mw->pix = rpix; image_view_set_pixbuf( (ImageView*)mw->img_view, mw->pix ); if( mw->zoom_mode == ZOOM_FIT ) main_win_fit_window_size( mw, FALSE, GDK_INTERP_BILINEAR ); } gboolean main_win_scale_image( MainWin* mw, double new_scale, GdkInterpType type ) { if( G_UNLIKELY( new_scale == 1.0 ) ) { gtk_toggle_button_set_active( (GtkToggleButton*)mw->btn_orig, TRUE ); mw->scale = 1.0; return TRUE; } mw->scale = new_scale; image_view_set_scale( (ImageView*)mw->img_view, new_scale, type ); update_title( NULL, mw ); return TRUE; } gboolean save_confirm( MainWin* mw, const char* file_path ) { if( g_file_test( file_path, G_FILE_TEST_EXISTS ) ) { GtkWidget* dlg = gtk_message_dialog_new( (GtkWindow*)mw, GTK_DIALOG_MODAL, GTK_MESSAGE_QUESTION, GTK_BUTTONS_YES_NO, _("The file name you selected already exists.\nDo you want to overwrite existing file?\n(Warning: The quality of original image might be lost)") ); if( gtk_dialog_run( (GtkDialog*)dlg ) != GTK_RESPONSE_YES ) { gtk_widget_destroy( dlg ); return FALSE; } gtk_widget_destroy( dlg ); } return TRUE; } gboolean main_win_save( MainWin* mw, const char* file_path, const char* type, gboolean confirm ) { gboolean result1,gdk_save_supported; GSList *gdk_formats; GSList *gdk_formats_i; if( ! mw->pix ) return FALSE; /* detect if the current type can be save by gdk_pixbuf_save() */ gdk_save_supported = FALSE; gdk_formats = gdk_pixbuf_get_formats(); for (gdk_formats_i = gdk_formats; gdk_formats_i; gdk_formats_i = g_slist_next(gdk_formats_i)) { GdkPixbufFormat *data; data = gdk_formats_i->data; if (gdk_pixbuf_format_is_writable(data)) { if ( strcmp(type, gdk_pixbuf_format_get_name(data))==0) { gdk_save_supported = TRUE; break; } } } g_slist_free (gdk_formats); GError* err = NULL; if (!gdk_save_supported) { main_win_show_error( mw, _("Writing this image format is not supported.") ); return FALSE; } if( strcmp( type, "jpeg" ) == 0 ) { char tmp[32]; g_sprintf(tmp, "%d", pref.jpg_quality); result1 = gdk_pixbuf_save( mw->pix, file_path, type, &err, "quality", tmp, NULL ); } else if( strcmp( type, "png" ) == 0 ) { char tmp[32]; g_sprintf(tmp, "%d", pref.png_compression); result1 = gdk_pixbuf_save( mw->pix, file_path, type, &err, "compression", tmp, NULL ); } else result1 = gdk_pixbuf_save( mw->pix, file_path, type, &err, NULL ); if( ! result1 ) { main_win_show_error( mw, err->message ); return FALSE; } return TRUE; } void on_delete( GtkWidget* btn, MainWin* mw ) { cancel_slideshow(mw); char* file_path = image_list_get_current_file_path( mw->img_list ); if( file_path ) { int resp = GTK_RESPONSE_YES; if ( pref.ask_before_delete ) { GtkWidget* dlg = gtk_message_dialog_new( (GtkWindow*)mw, GTK_DIALOG_MODAL, GTK_MESSAGE_QUESTION, GTK_BUTTONS_YES_NO, _("Are you sure you want to delete current file?\n\nWarning: Once deleted, the file cannot be recovered.") ); resp = gtk_dialog_run( (GtkDialog*)dlg ); gtk_widget_destroy( dlg ); } if( resp == GTK_RESPONSE_YES ) { const char* name = image_list_get_current( mw->img_list ); if( g_unlink( file_path ) != 0 ) main_win_show_error( mw, g_strerror(errno) ); else { const char* next_name = image_list_get_next( mw->img_list ); if( ! next_name ) next_name = image_list_get_prev( mw->img_list ); if( next_name ) { char* next_file_path = image_list_get_current_file_path( mw->img_list ); main_win_open( mw, next_file_path, ZOOM_FIT ); g_free( next_file_path ); } image_list_remove ( mw->img_list, name ); if ( ! next_name ) { main_win_close( mw ); image_list_close( mw->img_list ); image_view_set_pixbuf( (ImageView*)mw->img_view, NULL ); gtk_window_set_title( (GtkWindow*) mw, _("Image Viewer")); } } } g_free( file_path ); } } void on_toggle_toolbar( GtkMenuItem* item, MainWin* mw ) { pref.show_toolbar = !pref.show_toolbar; if (pref.show_toolbar) gtk_widget_show(gtk_widget_get_parent(mw->nav_bar)); else gtk_widget_hide(gtk_widget_get_parent(mw->nav_bar)); save_preferences(); } void show_popup_menu( MainWin* mw, GdkEventButton* evt ) { static PtkMenuItemEntry menu_def[] = { PTK_IMG_MENU_ITEM( N_( "Previous" ), GTK_STOCK_GO_BACK, on_prev, GDK_leftarrow, 0 ), PTK_IMG_MENU_ITEM( N_( "Next" ), GTK_STOCK_GO_FORWARD, on_next, GDK_rightarrow, 0 ), PTK_IMG_MENU_ITEM( N_( "Start/Stop Slideshow" ), GTK_STOCK_MEDIA_PLAY, on_slideshow_menu, GDK_W, 0 ), PTK_SEPARATOR_MENU_ITEM, PTK_IMG_MENU_ITEM( N_( "Zoom Out" ), GTK_STOCK_ZOOM_OUT, on_zoom_out, GDK_minus, 0 ), PTK_IMG_MENU_ITEM( N_( "Zoom In" ), GTK_STOCK_ZOOM_IN, on_zoom_in, GDK_plus, 0 ), PTK_IMG_MENU_ITEM( N_( "Fit Image To Window Size" ), GTK_STOCK_ZOOM_FIT, on_zoom_fit_menu, GDK_F, 0 ), PTK_IMG_MENU_ITEM( N_( "Original Size" ), GTK_STOCK_ZOOM_100, on_orig_size_menu, GDK_G, 0 ), PTK_SEPARATOR_MENU_ITEM, PTK_IMG_MENU_ITEM( N_( "Full Screen" ), GTK_STOCK_FULLSCREEN, on_full_screen, GDK_F11, 0 ), PTK_SEPARATOR_MENU_ITEM, PTK_IMG_MENU_ITEM( N_( "Rotate Counterclockwise" ), "object-rotate-left", on_rotate_counterclockwise, GDK_L, 0 ), PTK_IMG_MENU_ITEM( N_( "Rotate Clockwise" ), "object-rotate-right", on_rotate_clockwise, GDK_R, 0 ), PTK_IMG_MENU_ITEM( N_( "Flip Horizontal" ), "object-flip-horizontal", on_flip_horizontal, GDK_H, 0 ), PTK_IMG_MENU_ITEM( N_( "Flip Vertical" ), "object-flip-vertical", on_flip_vertical, GDK_V, 0 ), PTK_SEPARATOR_MENU_ITEM, PTK_IMG_MENU_ITEM( N_("Open File"), GTK_STOCK_OPEN, G_CALLBACK(on_open), GDK_O, 0 ), PTK_IMG_MENU_ITEM( N_("Save File"), GTK_STOCK_SAVE, G_CALLBACK(on_save), GDK_S, 0 ), PTK_IMG_MENU_ITEM( N_("Save As"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), // PTK_IMG_MENU_ITEM( N_("Save As Other Size"), GTK_STOCK_SAVE_AS, G_CALLBACK(on_save_as), GDK_A, 0 ), PTK_IMG_MENU_ITEM( N_("Delete File"), GTK_STOCK_DELETE, G_CALLBACK(on_delete), GDK_Delete, 0 ), PTK_SEPARATOR_MENU_ITEM, PTK_IMG_MENU_ITEM( N_("Preferences"), GTK_STOCK_PREFERENCES, G_CALLBACK(on_preference), GDK_P, 0 ), PTK_IMG_MENU_ITEM( N_("Show/Hide toolbar"), NULL, G_CALLBACK(on_toggle_toolbar), GDK_T, 0 ), PTK_STOCK_MENU_ITEM( GTK_STOCK_ABOUT, on_about ), PTK_SEPARATOR_MENU_ITEM, PTK_IMG_MENU_ITEM( N_("Quit"), GTK_STOCK_QUIT, G_CALLBACK(on_quit), GDK_Q, 0 ), PTK_MENU_END }; GtkWidget* rotate_cw; GtkWidget* rotate_ccw; GtkWidget* flip_v; GtkWidget* flip_h; menu_def[10].ret = &rotate_ccw; menu_def[11].ret = &rotate_cw; menu_def[12].ret = &flip_h; menu_def[13].ret = &flip_v; // mw accel group is useless. It's only used to display accels in popup menu GtkAccelGroup* accel_group = gtk_accel_group_new(); GtkMenuShell* popup = (GtkMenuShell*)ptk_menu_new_from_data( menu_def, mw, accel_group ); if( mw->animation ) { gtk_widget_set_sensitive( rotate_ccw, FALSE ); gtk_widget_set_sensitive( rotate_cw, FALSE ); gtk_widget_set_sensitive( flip_h, FALSE ); gtk_widget_set_sensitive( flip_v, FALSE ); } gtk_widget_show_all( (GtkWidget*)popup ); g_signal_connect( popup, "selection-done", G_CALLBACK(gtk_widget_destroy), NULL ); gtk_menu_popup( (GtkMenu*)popup, NULL, NULL, NULL, NULL, evt->button, evt->time ); } void on_about( GtkWidget* menu, MainWin* mw ) { GtkWidget * about_dlg; const gchar *authors[] = { "洪任諭 Hong Jen Yee ", "Martin Siggel ", "Hialan Liu ", "Marty Jack ", "Louis Casillas ", "Will Davies", _(" * Refer to source code of EOG image viewer and GThumb"), NULL }; /* TRANSLATORS: Replace this string with your names, one name per line. */ gchar *translators = _( "translator-credits" ); about_dlg = gtk_about_dialog_new (); gtk_container_set_border_width ( ( GtkContainer*)about_dlg , 2 ); gtk_about_dialog_set_version ( (GtkAboutDialog*)about_dlg, VERSION ); gtk_about_dialog_set_program_name ( (GtkAboutDialog*)about_dlg, _( "GPicView" ) ); gtk_about_dialog_set_logo( (GtkAboutDialog*)about_dlg, gdk_pixbuf_new_from_file( PACKAGE_DATA_DIR"/pixmaps/gpicview.png", NULL ) ); gtk_about_dialog_set_copyright ( (GtkAboutDialog*)about_dlg, _( "Copyright (C) 2007 - 2011" ) ); gtk_about_dialog_set_comments ( (GtkAboutDialog*)about_dlg, _( "Lightweight image viewer from LXDE project" ) ); gtk_about_dialog_set_license ( (GtkAboutDialog*)about_dlg, "GPicView\n\nCopyright (C) 2007 Hong Jen Yee (PCMan)\n\nThis program is free software; you can redistribute it and/or\nmodify it under the terms of the GNU General Public License\nas published by the Free Software Foundation; either version 2\nof the License, or (at your option) any later version.\n\nThis program is distributed in the hope that it will be useful,\nbut WITHOUT ANY WARRANTY; without even the implied warranty of\nMERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\nGNU General Public License for more details.\n\nYou should have received a copy of the GNU General Public License\nalong with this program; if not, write to the Free Software\nFoundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA." ); gtk_about_dialog_set_website ( (GtkAboutDialog*)about_dlg, "http://wiki.lxde.org/en/GPicView" ); gtk_about_dialog_set_authors ( (GtkAboutDialog*)about_dlg, authors ); gtk_about_dialog_set_translator_credits ( (GtkAboutDialog*)about_dlg, translators ); gtk_window_set_transient_for( (GtkWindow*) about_dlg, GTK_WINDOW( mw ) ); gtk_dialog_run( ( GtkDialog*)about_dlg ); gtk_widget_destroy( about_dlg ); } void on_drag_data_received( GtkWidget* widget, GdkDragContext *drag_context, int x, int y, GtkSelectionData* data, guint info, guint time, MainWin* mw ) { if( !data) return; #if GTK_CHECK_VERSION(2, 14, 0) int data_length = gtk_selection_data_get_length(data); #else int data_length = data->length; #endif if( data_length <= 0) return; char* file = NULL; if( info == 0 ) // text/uri-list { char** uris = gtk_selection_data_get_uris( data ); if( uris ) { file = g_filename_from_uri(*uris, NULL, NULL); g_strfreev( uris ); } } else if( info == 1 ) // text/plain { file = (char*)gtk_selection_data_get_text( data ); } if( file ) { main_win_open( mw, file, ZOOM_FIT ); g_free( file ); } } static void main_win_set_zoom_scale(MainWin* mw, double scale) { main_win_set_zoom_mode(mw, ZOOM_SCALE); if (scale > 20.0) scale = 20.0; if (scale < 0.02) scale = 0.02; if (mw->scale != scale) main_win_scale_image(mw, scale, GDK_INTERP_BILINEAR); } static void main_win_set_zoom_mode(MainWin* mw, ZoomMode mode) { if (mw->zoom_mode == mode) return; mw->zoom_mode = mode; main_win_update_zoom_buttons_state(mw); if (mode == ZOOM_ORIG) { mw->scale = 1.0; if (!mw->pix) return; update_title(NULL, mw); image_view_set_scale( (ImageView*)mw->img_view, 1.0, GDK_INTERP_BILINEAR ); while (gtk_events_pending ()) gtk_main_iteration (); main_win_center_image( mw ); // FIXME: mw doesn't work well. Why? } else if (mode == ZOOM_FIT) { main_win_fit_window_size( mw, FALSE, GDK_INTERP_BILINEAR ); } } static void main_win_update_zoom_buttons_state(MainWin* mw) { gboolean button_fit_active = mw->zoom_mode == ZOOM_FIT; gboolean button_orig_active = mw->zoom_mode == ZOOM_ORIG; if (gtk_toggle_button_get_active(GTK_TOGGLE_BUTTON(mw->btn_fit)) != button_fit_active) gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(mw->btn_fit), button_fit_active); if (gtk_toggle_button_get_active(GTK_TOGGLE_BUTTON(mw->btn_orig)) != button_orig_active) gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(mw->btn_orig), button_orig_active); } gpicview-0.2.4/src/pref.h0000644000000000000000000000275712231705732012132 00000000000000/* * pref.h * * Copyright (C) 2007 PCMan * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. */ #ifndef _PREF_H_ #define _PREF_H_ #include G_BEGIN_DECLS typedef struct _Pref { gboolean auto_save_rotated; /* Save rotated images */ gboolean ask_before_save; gboolean rotate_exif_only; gboolean ask_before_delete; gboolean open_maximized; int slide_delay; GdkColor bg; GdkColor bg_full; int jpg_quality; int png_compression; gboolean show_toolbar; }Pref; extern Pref pref; /* global variable holding user prerefences */ void load_preferences(); /* load user preferences */ void save_preferences(); /* save user preference s*/ void edit_preferences( GtkWindow* parent ); G_END_DECLS #endif gpicview-0.2.4/src/image-list.h0000644000000000000000000000530412231705732013220 00000000000000/*************************************************************************** * Copyright (C) 2007 by PCMan (Hong Jen Yee) * * pcman.tw@gmail.com * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ #ifndef IMAGELIST_H #define IMAGELIST_H #include #include /* for stat and time_t */ #include #include #include /** @author PCMan (Hong Jen Yee) */ typedef struct _ImageList { gchar* dir_path; GList* list; GList* current; time_t mtime; } ImageList; ImageList* image_list_new(); const char* image_list_get_dir( ImageList* il ); gboolean image_list_open_dir( ImageList* il, const char* path, GError** error); gboolean image_list_set_current( ImageList* il, const char* name ); const char* image_list_get_current( ImageList* il ); const char* image_list_get_first( ImageList* il ); const char* image_list_get_next( ImageList* il ); const char* image_list_get_prev( ImageList* il ); const char* image_list_get_last( ImageList* il ); void image_list_free( ImageList* il ); void image_list_close( ImageList* il ); gboolean image_list_is_empty( ImageList* il ); gboolean image_list_has_multiple_files( ImageList* il ); char* image_list_get_current_file_path( ImageList* il ); void image_list_sort_by_name( ImageList* il, GtkSortType type ); void image_list_remove( ImageList* il, const char* name ); /* FIXME: currently only GTK_SORT_ASCENDING is supported */ void image_list_add_sorted( ImageList* il, const char* name, gboolean set_current ); #endif gpicview-0.2.4/src/jhead.c0000644000000000000000000000374712231705732012244 00000000000000//-------------------------------------------------------------------------- // Program to pull the information out of various types of EXIF digital // camera files and show it in a reasonably consistent way // // Version 2.82 // // Compiling under Windows: // Make sure you have Microsoft's compiler on the path, then run make.bat // // Dec 1999 - Apr 2008 // // by Matthias Wandel www.sentex.net/~mwandel //-------------------------------------------------------------------------- // This file is extracted from jhead.c of jhead project // by hialan //-------------------------------------------------------------------------- #include "jhead.h" int ShowTags = FALSE; // Do not show raw by default. int DumpExifMap = FALSE; //-------------------------------------------------------------------------- // Error exit handler //-------------------------------------------------------------------------- void ErrFatal(char * msg) { // fprintf(stderr,"Error : %s\n", msg); // if (CurrentFile) fprintf(stderr,"in file '%s'\n",CurrentFile); exit(EXIT_FAILURE); } //-------------------------------------------------------------------------- // Report non fatal errors. Now that microsoft.net modifies exif headers, // there's corrupted ones, and there could be more in the future. //-------------------------------------------------------------------------- void ErrNonfatal(char * msg, int a1, int a2) { /* if (SupressNonFatalErrors) return; fprintf(stderr,"Nonfatal Error : "); if (CurrentFile) fprintf(stderr,"'%s' ",CurrentFile); fprintf(stderr, msg, a1, a2); fprintf(stderr, "\n"); */ return; } //-------------------------------------------------------------------------- // Set file time as exif time. //-------------------------------------------------------------------------- void FileTimeAsString(char * TimeStr) { struct tm ts; ts = *localtime(&ImageInfo.FileDateTime); strftime(TimeStr, 20, "%Y:%m:%d %H:%M:%S", &ts); } gpicview-0.2.4/src/Makefile.in0000644000000000000000000013735012231706055013067 00000000000000# Makefile.in generated by automake 1.14 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = gpicview$(EXEEXT) noinst_PROGRAMS = xml-purge$(EXEEXT) subdir = src DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ $(top_srcdir)/depcomp $(noinst_HEADERS) ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS) am_gpicview_OBJECTS = gpicview-gpicview.$(OBJEXT) \ gpicview-image-list.$(OBJEXT) gpicview-main-win.$(OBJEXT) \ gpicview-image-view.$(OBJEXT) gpicview-working-area.$(OBJEXT) \ gpicview-ptk-menu.$(OBJEXT) gpicview-file-dlgs.$(OBJEXT) \ gpicview-jpeg-tran.$(OBJEXT) gpicview-tran-supp.$(OBJEXT) \ gpicview-pref.$(OBJEXT) gpicview-jhead.$(OBJEXT) \ gpicview-exif.$(OBJEXT) gpicview-jpgfile.$(OBJEXT) gpicview_OBJECTS = $(am_gpicview_OBJECTS) am__DEPENDENCIES_1 = gpicview_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) am__v_lt_0 = --silent am__v_lt_1 = am_xml_purge_OBJECTS = xml_purge-xml-purge.$(OBJEXT) xml_purge_OBJECTS = $(am_xml_purge_OBJECTS) xml_purge_DEPENDENCIES = xml_purge_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(xml_purge_CFLAGS) \ $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) AM_V_CC = $(am__v_CC_@AM_V@) am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) am__v_CC_0 = @echo " CC " $@; am__v_CC_1 = CCLD = $(CC) LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CCLD = $(am__v_CCLD_@AM_V@) am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) am__v_CCLD_0 = @echo " CCLD " $@; am__v_CCLD_1 = SOURCES = $(gpicview_SOURCES) $(xml_purge_SOURCES) DIST_SOURCES = $(gpicview_SOURCES) $(xml_purge_SOURCES) am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac HEADERS = $(noinst_HEADERS) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ADDITIONAL_FLAGS = @ADDITIONAL_FLAGS@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ X11_CFLAGS = @X11_CFLAGS@ X11_LIBS = @X11_LIBS@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ intltool__v_merge_options_ = @intltool__v_merge_options_@ intltool__v_merge_options_0 = @intltool__v_merge_options_0@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ # set the include path found by configure gpicview_CPPFLAGS = $(all_includes) \ $(X11_CFLAGS) \ $(GTK_CFLAGS) \ $(ADDITIONAL_FLAGS) \ -I$(top_srcdir) \ -DPACKAGE_DATA_DIR=\""$(datadir)"\" \ -DPACKAGE_LOCALE_DIR=\""$(prefix)/$(DATADIRNAME)/locale"\" gpicview_SOURCES = \ gpicview.c \ image-list.c \ main-win.c \ image-view.c \ working-area.c \ ptk-menu.c \ file-dlgs.c \ jpeg-tran.c \ tran-supp.c \ pref.c \ jhead.c \ exif.c \ jpgfile.c # the library search path. # use -nodefaultlibs to prevent linking libstdc++ gpicview_LDADD = $(X11_LIBS) $(GTK_LIBS) -lm noinst_HEADERS = \ glib-mem.h \ image-list.h \ main-win.h \ image-view.h \ working-area.h \ ptk-menu.h \ file-dlgs.h \ jpeg-tran.h \ tran-supp.h \ pref.h \ jhead.h xml_purge_SOURCES = xml-purge.c xml_purge_CFLAGS = @X11_CFLAGS@ xml_purge_LDADD = @X11_LIBS@ all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign src/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ fi; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p \ || test -f $$p1 \ ; then echo "$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n;h' \ -e 's|.*|.|' \ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) files[d] = files[d] " " $$1; \ else { print "f", $$3 "/" $$4, $$1; } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ } \ ; done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ -e 's/$$/$(EXEEXT)/' \ `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(bindir)" && rm -f $$files clean-binPROGRAMS: @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list clean-noinstPROGRAMS: @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list gpicview$(EXEEXT): $(gpicview_OBJECTS) $(gpicview_DEPENDENCIES) $(EXTRA_gpicview_DEPENDENCIES) @rm -f gpicview$(EXEEXT) $(AM_V_CCLD)$(LINK) $(gpicview_OBJECTS) $(gpicview_LDADD) $(LIBS) xml-purge$(EXEEXT): $(xml_purge_OBJECTS) $(xml_purge_DEPENDENCIES) $(EXTRA_xml_purge_DEPENDENCIES) @rm -f xml-purge$(EXEEXT) $(AM_V_CCLD)$(xml_purge_LINK) $(xml_purge_OBJECTS) $(xml_purge_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpicview-exif.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpicview-file-dlgs.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpicview-gpicview.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpicview-image-list.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpicview-image-view.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpicview-jhead.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpicview-jpeg-tran.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpicview-jpgfile.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpicview-main-win.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpicview-pref.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpicview-ptk-menu.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpicview-tran-supp.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpicview-working-area.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xml_purge-xml-purge.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< .c.obj: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< gpicview-gpicview.o: gpicview.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-gpicview.o -MD -MP -MF $(DEPDIR)/gpicview-gpicview.Tpo -c -o gpicview-gpicview.o `test -f 'gpicview.c' || echo '$(srcdir)/'`gpicview.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-gpicview.Tpo $(DEPDIR)/gpicview-gpicview.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='gpicview.c' object='gpicview-gpicview.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-gpicview.o `test -f 'gpicview.c' || echo '$(srcdir)/'`gpicview.c gpicview-gpicview.obj: gpicview.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-gpicview.obj -MD -MP -MF $(DEPDIR)/gpicview-gpicview.Tpo -c -o gpicview-gpicview.obj `if test -f 'gpicview.c'; then $(CYGPATH_W) 'gpicview.c'; else $(CYGPATH_W) '$(srcdir)/gpicview.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-gpicview.Tpo $(DEPDIR)/gpicview-gpicview.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='gpicview.c' object='gpicview-gpicview.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-gpicview.obj `if test -f 'gpicview.c'; then $(CYGPATH_W) 'gpicview.c'; else $(CYGPATH_W) '$(srcdir)/gpicview.c'; fi` gpicview-image-list.o: image-list.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-image-list.o -MD -MP -MF $(DEPDIR)/gpicview-image-list.Tpo -c -o gpicview-image-list.o `test -f 'image-list.c' || echo '$(srcdir)/'`image-list.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-image-list.Tpo $(DEPDIR)/gpicview-image-list.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='image-list.c' object='gpicview-image-list.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-image-list.o `test -f 'image-list.c' || echo '$(srcdir)/'`image-list.c gpicview-image-list.obj: image-list.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-image-list.obj -MD -MP -MF $(DEPDIR)/gpicview-image-list.Tpo -c -o gpicview-image-list.obj `if test -f 'image-list.c'; then $(CYGPATH_W) 'image-list.c'; else $(CYGPATH_W) '$(srcdir)/image-list.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-image-list.Tpo $(DEPDIR)/gpicview-image-list.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='image-list.c' object='gpicview-image-list.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-image-list.obj `if test -f 'image-list.c'; then $(CYGPATH_W) 'image-list.c'; else $(CYGPATH_W) '$(srcdir)/image-list.c'; fi` gpicview-main-win.o: main-win.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-main-win.o -MD -MP -MF $(DEPDIR)/gpicview-main-win.Tpo -c -o gpicview-main-win.o `test -f 'main-win.c' || echo '$(srcdir)/'`main-win.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-main-win.Tpo $(DEPDIR)/gpicview-main-win.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='main-win.c' object='gpicview-main-win.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-main-win.o `test -f 'main-win.c' || echo '$(srcdir)/'`main-win.c gpicview-main-win.obj: main-win.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-main-win.obj -MD -MP -MF $(DEPDIR)/gpicview-main-win.Tpo -c -o gpicview-main-win.obj `if test -f 'main-win.c'; then $(CYGPATH_W) 'main-win.c'; else $(CYGPATH_W) '$(srcdir)/main-win.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-main-win.Tpo $(DEPDIR)/gpicview-main-win.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='main-win.c' object='gpicview-main-win.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-main-win.obj `if test -f 'main-win.c'; then $(CYGPATH_W) 'main-win.c'; else $(CYGPATH_W) '$(srcdir)/main-win.c'; fi` gpicview-image-view.o: image-view.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-image-view.o -MD -MP -MF $(DEPDIR)/gpicview-image-view.Tpo -c -o gpicview-image-view.o `test -f 'image-view.c' || echo '$(srcdir)/'`image-view.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-image-view.Tpo $(DEPDIR)/gpicview-image-view.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='image-view.c' object='gpicview-image-view.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-image-view.o `test -f 'image-view.c' || echo '$(srcdir)/'`image-view.c gpicview-image-view.obj: image-view.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-image-view.obj -MD -MP -MF $(DEPDIR)/gpicview-image-view.Tpo -c -o gpicview-image-view.obj `if test -f 'image-view.c'; then $(CYGPATH_W) 'image-view.c'; else $(CYGPATH_W) '$(srcdir)/image-view.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-image-view.Tpo $(DEPDIR)/gpicview-image-view.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='image-view.c' object='gpicview-image-view.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-image-view.obj `if test -f 'image-view.c'; then $(CYGPATH_W) 'image-view.c'; else $(CYGPATH_W) '$(srcdir)/image-view.c'; fi` gpicview-working-area.o: working-area.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-working-area.o -MD -MP -MF $(DEPDIR)/gpicview-working-area.Tpo -c -o gpicview-working-area.o `test -f 'working-area.c' || echo '$(srcdir)/'`working-area.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-working-area.Tpo $(DEPDIR)/gpicview-working-area.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='working-area.c' object='gpicview-working-area.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-working-area.o `test -f 'working-area.c' || echo '$(srcdir)/'`working-area.c gpicview-working-area.obj: working-area.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-working-area.obj -MD -MP -MF $(DEPDIR)/gpicview-working-area.Tpo -c -o gpicview-working-area.obj `if test -f 'working-area.c'; then $(CYGPATH_W) 'working-area.c'; else $(CYGPATH_W) '$(srcdir)/working-area.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-working-area.Tpo $(DEPDIR)/gpicview-working-area.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='working-area.c' object='gpicview-working-area.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-working-area.obj `if test -f 'working-area.c'; then $(CYGPATH_W) 'working-area.c'; else $(CYGPATH_W) '$(srcdir)/working-area.c'; fi` gpicview-ptk-menu.o: ptk-menu.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-ptk-menu.o -MD -MP -MF $(DEPDIR)/gpicview-ptk-menu.Tpo -c -o gpicview-ptk-menu.o `test -f 'ptk-menu.c' || echo '$(srcdir)/'`ptk-menu.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-ptk-menu.Tpo $(DEPDIR)/gpicview-ptk-menu.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='ptk-menu.c' object='gpicview-ptk-menu.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-ptk-menu.o `test -f 'ptk-menu.c' || echo '$(srcdir)/'`ptk-menu.c gpicview-ptk-menu.obj: ptk-menu.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-ptk-menu.obj -MD -MP -MF $(DEPDIR)/gpicview-ptk-menu.Tpo -c -o gpicview-ptk-menu.obj `if test -f 'ptk-menu.c'; then $(CYGPATH_W) 'ptk-menu.c'; else $(CYGPATH_W) '$(srcdir)/ptk-menu.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-ptk-menu.Tpo $(DEPDIR)/gpicview-ptk-menu.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='ptk-menu.c' object='gpicview-ptk-menu.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-ptk-menu.obj `if test -f 'ptk-menu.c'; then $(CYGPATH_W) 'ptk-menu.c'; else $(CYGPATH_W) '$(srcdir)/ptk-menu.c'; fi` gpicview-file-dlgs.o: file-dlgs.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-file-dlgs.o -MD -MP -MF $(DEPDIR)/gpicview-file-dlgs.Tpo -c -o gpicview-file-dlgs.o `test -f 'file-dlgs.c' || echo '$(srcdir)/'`file-dlgs.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-file-dlgs.Tpo $(DEPDIR)/gpicview-file-dlgs.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='file-dlgs.c' object='gpicview-file-dlgs.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-file-dlgs.o `test -f 'file-dlgs.c' || echo '$(srcdir)/'`file-dlgs.c gpicview-file-dlgs.obj: file-dlgs.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-file-dlgs.obj -MD -MP -MF $(DEPDIR)/gpicview-file-dlgs.Tpo -c -o gpicview-file-dlgs.obj `if test -f 'file-dlgs.c'; then $(CYGPATH_W) 'file-dlgs.c'; else $(CYGPATH_W) '$(srcdir)/file-dlgs.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-file-dlgs.Tpo $(DEPDIR)/gpicview-file-dlgs.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='file-dlgs.c' object='gpicview-file-dlgs.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-file-dlgs.obj `if test -f 'file-dlgs.c'; then $(CYGPATH_W) 'file-dlgs.c'; else $(CYGPATH_W) '$(srcdir)/file-dlgs.c'; fi` gpicview-jpeg-tran.o: jpeg-tran.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-jpeg-tran.o -MD -MP -MF $(DEPDIR)/gpicview-jpeg-tran.Tpo -c -o gpicview-jpeg-tran.o `test -f 'jpeg-tran.c' || echo '$(srcdir)/'`jpeg-tran.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-jpeg-tran.Tpo $(DEPDIR)/gpicview-jpeg-tran.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='jpeg-tran.c' object='gpicview-jpeg-tran.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-jpeg-tran.o `test -f 'jpeg-tran.c' || echo '$(srcdir)/'`jpeg-tran.c gpicview-jpeg-tran.obj: jpeg-tran.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-jpeg-tran.obj -MD -MP -MF $(DEPDIR)/gpicview-jpeg-tran.Tpo -c -o gpicview-jpeg-tran.obj `if test -f 'jpeg-tran.c'; then $(CYGPATH_W) 'jpeg-tran.c'; else $(CYGPATH_W) '$(srcdir)/jpeg-tran.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-jpeg-tran.Tpo $(DEPDIR)/gpicview-jpeg-tran.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='jpeg-tran.c' object='gpicview-jpeg-tran.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-jpeg-tran.obj `if test -f 'jpeg-tran.c'; then $(CYGPATH_W) 'jpeg-tran.c'; else $(CYGPATH_W) '$(srcdir)/jpeg-tran.c'; fi` gpicview-tran-supp.o: tran-supp.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-tran-supp.o -MD -MP -MF $(DEPDIR)/gpicview-tran-supp.Tpo -c -o gpicview-tran-supp.o `test -f 'tran-supp.c' || echo '$(srcdir)/'`tran-supp.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-tran-supp.Tpo $(DEPDIR)/gpicview-tran-supp.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='tran-supp.c' object='gpicview-tran-supp.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-tran-supp.o `test -f 'tran-supp.c' || echo '$(srcdir)/'`tran-supp.c gpicview-tran-supp.obj: tran-supp.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-tran-supp.obj -MD -MP -MF $(DEPDIR)/gpicview-tran-supp.Tpo -c -o gpicview-tran-supp.obj `if test -f 'tran-supp.c'; then $(CYGPATH_W) 'tran-supp.c'; else $(CYGPATH_W) '$(srcdir)/tran-supp.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-tran-supp.Tpo $(DEPDIR)/gpicview-tran-supp.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='tran-supp.c' object='gpicview-tran-supp.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-tran-supp.obj `if test -f 'tran-supp.c'; then $(CYGPATH_W) 'tran-supp.c'; else $(CYGPATH_W) '$(srcdir)/tran-supp.c'; fi` gpicview-pref.o: pref.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-pref.o -MD -MP -MF $(DEPDIR)/gpicview-pref.Tpo -c -o gpicview-pref.o `test -f 'pref.c' || echo '$(srcdir)/'`pref.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-pref.Tpo $(DEPDIR)/gpicview-pref.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='pref.c' object='gpicview-pref.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-pref.o `test -f 'pref.c' || echo '$(srcdir)/'`pref.c gpicview-pref.obj: pref.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-pref.obj -MD -MP -MF $(DEPDIR)/gpicview-pref.Tpo -c -o gpicview-pref.obj `if test -f 'pref.c'; then $(CYGPATH_W) 'pref.c'; else $(CYGPATH_W) '$(srcdir)/pref.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-pref.Tpo $(DEPDIR)/gpicview-pref.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='pref.c' object='gpicview-pref.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-pref.obj `if test -f 'pref.c'; then $(CYGPATH_W) 'pref.c'; else $(CYGPATH_W) '$(srcdir)/pref.c'; fi` gpicview-jhead.o: jhead.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-jhead.o -MD -MP -MF $(DEPDIR)/gpicview-jhead.Tpo -c -o gpicview-jhead.o `test -f 'jhead.c' || echo '$(srcdir)/'`jhead.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-jhead.Tpo $(DEPDIR)/gpicview-jhead.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='jhead.c' object='gpicview-jhead.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-jhead.o `test -f 'jhead.c' || echo '$(srcdir)/'`jhead.c gpicview-jhead.obj: jhead.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-jhead.obj -MD -MP -MF $(DEPDIR)/gpicview-jhead.Tpo -c -o gpicview-jhead.obj `if test -f 'jhead.c'; then $(CYGPATH_W) 'jhead.c'; else $(CYGPATH_W) '$(srcdir)/jhead.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-jhead.Tpo $(DEPDIR)/gpicview-jhead.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='jhead.c' object='gpicview-jhead.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-jhead.obj `if test -f 'jhead.c'; then $(CYGPATH_W) 'jhead.c'; else $(CYGPATH_W) '$(srcdir)/jhead.c'; fi` gpicview-exif.o: exif.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-exif.o -MD -MP -MF $(DEPDIR)/gpicview-exif.Tpo -c -o gpicview-exif.o `test -f 'exif.c' || echo '$(srcdir)/'`exif.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-exif.Tpo $(DEPDIR)/gpicview-exif.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='exif.c' object='gpicview-exif.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-exif.o `test -f 'exif.c' || echo '$(srcdir)/'`exif.c gpicview-exif.obj: exif.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-exif.obj -MD -MP -MF $(DEPDIR)/gpicview-exif.Tpo -c -o gpicview-exif.obj `if test -f 'exif.c'; then $(CYGPATH_W) 'exif.c'; else $(CYGPATH_W) '$(srcdir)/exif.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-exif.Tpo $(DEPDIR)/gpicview-exif.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='exif.c' object='gpicview-exif.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-exif.obj `if test -f 'exif.c'; then $(CYGPATH_W) 'exif.c'; else $(CYGPATH_W) '$(srcdir)/exif.c'; fi` gpicview-jpgfile.o: jpgfile.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-jpgfile.o -MD -MP -MF $(DEPDIR)/gpicview-jpgfile.Tpo -c -o gpicview-jpgfile.o `test -f 'jpgfile.c' || echo '$(srcdir)/'`jpgfile.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-jpgfile.Tpo $(DEPDIR)/gpicview-jpgfile.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='jpgfile.c' object='gpicview-jpgfile.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-jpgfile.o `test -f 'jpgfile.c' || echo '$(srcdir)/'`jpgfile.c gpicview-jpgfile.obj: jpgfile.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpicview-jpgfile.obj -MD -MP -MF $(DEPDIR)/gpicview-jpgfile.Tpo -c -o gpicview-jpgfile.obj `if test -f 'jpgfile.c'; then $(CYGPATH_W) 'jpgfile.c'; else $(CYGPATH_W) '$(srcdir)/jpgfile.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gpicview-jpgfile.Tpo $(DEPDIR)/gpicview-jpgfile.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='jpgfile.c' object='gpicview-jpgfile.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpicview_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpicview-jpgfile.obj `if test -f 'jpgfile.c'; then $(CYGPATH_W) 'jpgfile.c'; else $(CYGPATH_W) '$(srcdir)/jpgfile.c'; fi` xml_purge-xml-purge.o: xml-purge.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xml_purge_CFLAGS) $(CFLAGS) -MT xml_purge-xml-purge.o -MD -MP -MF $(DEPDIR)/xml_purge-xml-purge.Tpo -c -o xml_purge-xml-purge.o `test -f 'xml-purge.c' || echo '$(srcdir)/'`xml-purge.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xml_purge-xml-purge.Tpo $(DEPDIR)/xml_purge-xml-purge.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='xml-purge.c' object='xml_purge-xml-purge.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xml_purge_CFLAGS) $(CFLAGS) -c -o xml_purge-xml-purge.o `test -f 'xml-purge.c' || echo '$(srcdir)/'`xml-purge.c xml_purge-xml-purge.obj: xml-purge.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xml_purge_CFLAGS) $(CFLAGS) -MT xml_purge-xml-purge.obj -MD -MP -MF $(DEPDIR)/xml_purge-xml-purge.Tpo -c -o xml_purge-xml-purge.obj `if test -f 'xml-purge.c'; then $(CYGPATH_W) 'xml-purge.c'; else $(CYGPATH_W) '$(srcdir)/xml-purge.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/xml_purge-xml-purge.Tpo $(DEPDIR)/xml_purge-xml-purge.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='xml-purge.c' object='xml_purge-xml-purge.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xml_purge_CFLAGS) $(CFLAGS) -c -o xml_purge-xml-purge.obj `if test -f 'xml-purge.c'; then $(CYGPATH_W) 'xml-purge.c'; else $(CYGPATH_W) '$(srcdir)/xml-purge.c'; fi` mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-am TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-am CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-am cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(PROGRAMS) $(HEADERS) installdirs: for dir in "$(DESTDIR)$(bindir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-binPROGRAMS clean-generic clean-libtool \ clean-noinstPROGRAMS mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-binPROGRAMS install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-binPROGRAMS .MAKE: install-am install-strip .PHONY: CTAGS GTAGS TAGS all all-am check check-am clean \ clean-binPROGRAMS clean-generic clean-libtool \ clean-noinstPROGRAMS cscopelist-am ctags ctags-am distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-binPROGRAMS install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-am uninstall uninstall-am uninstall-binPROGRAMS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: gpicview-0.2.4/src/tran-supp.h0000644000000000000000000001455512231705732013126 00000000000000/* -*- Mode: C; tab-width: 8; indent-tabs-mode: t; c-basic-offset: 8 -*- */ /* * GThumb * * Copyright (C) 2001, 2002 The Free Software Foundation, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Street #330, Boston, MA 02111-1307, USA. */ /* based upon file transupp.h from the libjpeg package, original copyright * note follows: * * transupp.h * * Copyright (C) 1997, Thomas G. Lane. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * * This file contains declarations for image transformation routines and * other utility code used by the jpegtran sample application. These are * NOT part of the core JPEG library. But we keep these routines separate * from jpegtran.c to ease the task of maintaining jpegtran-like programs * that have other user interfaces. * * NOTE: all the routines declared here have very specific requirements * about when they are to be executed during the reading and writing of the * source and destination files. See the comments in transupp.c, or see * jpegtran.c for an example of correct usage. */ /* * Codes for supported types of image transformations. */ #include #ifdef HAVE_LIBJPEG #ifndef TRANSUPP_H #define TRANSUPP_H #include typedef enum { JXFORM_NONE, /* no transformation */ JXFORM_FLIP_H, /* horizontal flip */ JXFORM_FLIP_V, /* vertical flip */ JXFORM_TRANSPOSE, /* transpose across UL-to-LR axis */ JXFORM_TRANSVERSE, /* transpose across UR-to-LL axis */ JXFORM_ROT_90, /* 90-degree clockwise rotation */ JXFORM_ROT_180, /* 180-degree rotation */ JXFORM_ROT_270 /* 270-degree clockwise (or 90 ccw) */ } JXFORM_CODE; /* * Although rotating and flipping data expressed as DCT coefficients is not * hard, there is an asymmetry in the JPEG format specification for images * whose dimensions aren't multiples of the iMCU size. The right and bottom * image edges are padded out to the next iMCU boundary with junk data; but * no padding is possible at the top and left edges. If we were to flip * the whole image including the pad data, then pad garbage would become * visible at the top and/or left, and real pixels would disappear into the * pad margins --- perhaps permanently, since encoders & decoders may not * bother to preserve DCT blocks that appear to be completely outside the * nominal image area. So, we have to exclude any partial iMCUs from the * basic transformation. * * Transpose is the only transformation that can handle partial iMCUs at the * right and bottom edges completely cleanly. flip_h can flip partial iMCUs * at the bottom, but leaves any partial iMCUs at the right edge untouched. * Similarly flip_v leaves any partial iMCUs at the bottom edge untouched. * The other transforms are defined as combinations of these basic transforms * and process edge blocks in a way that preserves the equivalence. * * The "trim" option causes untransformable partial iMCUs to be dropped; * this is not strictly lossless, but it usually gives the best-looking * result for odd-size images. Note that when this option is active, * the expected mathematical equivalences between the transforms may not hold. * (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim * followed by -rot 180 -trim trims both edges.) * * We also offer a "force to grayscale" option, which simply discards the * chrominance channels of a YCbCr image. This is lossless in the sense that * the luminance channel is preserved exactly. It's not the same kind of * thing as the rotate/flip transformations, but it's convenient to handle it * as part of this package, mainly because the transformation routines have to * be aware of the option to know how many components to work on. */ typedef struct { /* Options: set by caller */ JXFORM_CODE transform; /* image transform operator */ boolean trim; /* if TRUE, trim partial MCUs as needed */ boolean force_grayscale; /* if TRUE, convert color image to grayscale */ /* Internal workspace: caller should not touch these */ int num_components; /* # of components in workspace */ jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */ } jpeg_transform_info; /* Request any required workspace */ void jtransform_request_workspace (j_decompress_ptr srcinfo, jpeg_transform_info *info); /* Adjust output image parameters */ jvirt_barray_ptr * jtransform_adjust_parameters (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, jvirt_barray_ptr *src_coef_arrays, jpeg_transform_info *info); /* Execute the actual transformation, if any */ void jtransform_execute_transformation (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, jvirt_barray_ptr *src_coef_arrays, jpeg_transform_info *info); /* * Support for copying optional markers from source to destination file. */ typedef enum { JCOPYOPT_NONE, /* copy no optional markers */ JCOPYOPT_COMMENTS, /* copy only comment (COM) markers */ JCOPYOPT_ALL /* copy all optional markers */ } JCOPY_OPTION; #define JCOPYOPT_DEFAULT JCOPYOPT_COMMENTS /* recommended default */ /* Setup decompression object to save desired markers in memory */ void jcopy_markers_setup (j_decompress_ptr srcinfo, JCOPY_OPTION option); /* Copy markers saved in the given source object to the destination object */ void jcopy_markers_execute (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, JCOPY_OPTION option); #endif /* TRANSUPP_H */ #endif /* HAVE_LIBJPEG */ gpicview-0.2.4/src/ptk-menu.h0000644000000000000000000000415212231705732012725 00000000000000/* * C Interface: ptk-menu * * Description: Some GUI utilities * * * Author: Hong Jen Yee (PCMan) , (C) 2006 * * Copyright: See COPYING file that comes with this distribution * */ /* I don't like GtkUIManager provided by gtk+, so I implement my own. ;-) */ #ifndef _PTK_MENU_H_ #define _PTK_UTILS_H_ #include #include G_BEGIN_DECLS #define PTK_STOCK_MENU_ITEM( id, cb ) { id, NULL, G_CALLBACK(cb), 0, 0, NULL, NULL } #define PTK_MENU_ITEM( label, cb, key, mod ) { label, NULL, G_CALLBACK(cb), key, mod, NULL, NULL } #define PTK_CHECK_MENU_ITEM( label, cb, key, mod ) { label, (char*)1, G_CALLBACK(cb), key, mod, NULL, NULL } #define PTK_RADIO_MENU_ITEM( label, cb, key, mod ) { label, (char*)2, G_CALLBACK(cb), key, mod, NULL, NULL } #define PTK_IMG_MENU_ITEM( label, icon, cb, key, mod ) { label, icon, G_CALLBACK(cb), key, mod, NULL, NULL } #define PTK_POPUP_MENU( label, sub ) { label, NULL, NULL, 0, 0, sub, NULL } #define PTK_POPUP_IMG_MENU( label, icon, sub ) { label, icon, NULL, 0, 0, sub, NULL } #define PTK_SEPARATOR_MENU_ITEM { NULL, (char *)(-1), NULL, 0, 0, NULL, 0} #define PTK_MENU_END {0} #define PTK_IS_STOCK_ITEM( ent ) ( ent->label && (*(guint32*)ent->label) == *(guint32*)"gtk-" ) #define PTK_IS_CHECK_MENU_ITEM( ent ) ( ent->stock_icon == (char*)1 ) #define PTK_IS_RADIO_MENU_ITEM( ent ) ( ent->stock_icon == (char*)2 ) struct _PtkMenuItemEntry { const char* label; /* or stock id */ const char* stock_icon; /* or menu type 1: check, 2: radio */ GCallback callback; guint key; guint mod; /* GdkModifierType */ struct _PtkMenuItemEntry* sub_menu; GtkWidget** ret; }; typedef struct _PtkMenuItemEntry PtkMenuItemEntry; GtkWidget* ptk_menu_new_from_data( PtkMenuItemEntry* entries, gpointer cb_data, GtkAccelGroup* accel_group ); void ptk_menu_add_items_from_data( GtkWidget* menu, PtkMenuItemEntry* entries, gpointer cb_data, GtkAccelGroup* accel_group ); G_END_DECLS #endif gpicview-0.2.4/src/jhead.h0000644000000000000000000001544512231705732012247 00000000000000//-------------------------------------------------------------------------- // Include file for jhead program. // // This include file only defines stuff that goes across modules. // I like to keep the definitions for macros and structures as close to // where they get used as possible, so include files only get stuff that // gets used in more than one file. //-------------------------------------------------------------------------- #define _CRT_SECURE_NO_DEPRECATE 1 #include #include #include #include #include #include //-------------------------------------------------------------------------- #ifdef _WIN32 #include #else #include #include #include #include #include #endif typedef unsigned char uchar; #ifndef TRUE #define TRUE 1 #define FALSE 0 #endif #define MAX_COMMENT_SIZE 2000 #ifdef _WIN32 #define PATH_MAX _MAX_PATH #endif #ifdef __GNU__ #define PATH_MAX 4096 #endif //-------------------------------------------------------------------------- // This structure is used to store jpeg file sections in memory. typedef struct { uchar * Data; int Type; unsigned Size; }Section_t; extern int ExifSectionIndex; extern int DumpExifMap; #define MAX_DATE_COPIES 10 //-------------------------------------------------------------------------- // This structure stores Exif header image elements in a simple manner // Used to store camera data as extracted from the various ways that it can be // stored in an exif header typedef struct { char FileName [PATH_MAX+1]; time_t FileDateTime; unsigned FileSize; char CameraMake [32]; char CameraModel [40]; char DateTime [20]; int Height, Width; int Orientation; int IsColor; int Process; int FlashUsed; float FocalLength; float ExposureTime; float ApertureFNumber; float Distance; float CCDWidth; float ExposureBias; float DigitalZoomRatio; int FocalLength35mmEquiv; // Exif 2.2 tag - usually not present. int Whitebalance; int MeteringMode; int ExposureProgram; int ExposureMode; int ISOequivalent; int LightSource; int DistanceRange; char Comments[MAX_COMMENT_SIZE]; unsigned ThumbnailOffset; // Exif offset to thumbnail unsigned ThumbnailSize; // Size of thumbnail. unsigned LargestExifOffset; // Last exif data referenced (to check if thumbnail is at end) char ThumbnailAtEnd; // Exif header ends with the thumbnail // (we can only modify the thumbnail if its at the end) int ThumbnailSizeOffset; int DateTimeOffsets[MAX_DATE_COPIES]; int numDateTimeTags; int GpsInfoPresent; char GpsLat[31]; char GpsLong[31]; char GpsAlt[20]; }ImageInfo_t; #define EXIT_FAILURE 1 #define EXIT_SUCCESS 0 // jpgfile.c functions typedef enum { READ_METADATA = 1, READ_IMAGE = 2, READ_ALL = 3 }ReadMode_t; // prototypes for jhead.c functions void ErrFatal(char * msg); void ErrNonfatal(char * msg, int a1, int a2); void FileTimeAsString(char * TimeStr); // Prototypes for exif.c functions. int Exif2tm(struct tm * timeptr, char * ExifTime); void process_EXIF (unsigned char * CharBuf, unsigned int length); int RemoveThumbnail(unsigned char * ExifSection); void ShowImageInfo(int ShowFileInfo); void ShowConciseImageInfo(void); const char * ClearOrientation(void); void PrintFormatNumber(void * ValuePtr, int Format, int ByteCount); double ConvertAnyFormat(void * ValuePtr, int Format); int Get16u(void * Short); unsigned Get32u(void * Long); int Get32s(void * Long); void Put32u(void * Value, unsigned PutValue); void create_EXIF(void); //-------------------------------------------------------------------------- // Exif format descriptor stuff extern const int BytesPerFormat[]; #define NUM_FORMATS 12 #define FMT_BYTE 1 #define FMT_STRING 2 #define FMT_USHORT 3 #define FMT_ULONG 4 #define FMT_URATIONAL 5 #define FMT_SBYTE 6 #define FMT_UNDEFINED 7 #define FMT_SSHORT 8 #define FMT_SLONG 9 #define FMT_SRATIONAL 10 #define FMT_SINGLE 11 #define FMT_DOUBLE 12 /* // makernote.c prototypes extern void ProcessMakerNote(unsigned char * DirStart, int ByteCount, unsigned char * OffsetBase, unsigned ExifLength); // gpsinfo.c prototypes void ProcessGpsInfo(unsigned char * ValuePtr, int ByteCount, unsigned char * OffsetBase, unsigned ExifLength); // iptc.c prototpyes void show_IPTC (unsigned char * CharBuf, unsigned int length); void ShowXmp(Section_t XmpSection); // Prototypes for myglob.c module extern void MyGlob(const char * Pattern , void (*FileFuncParm)(const char * FileName)); */ // Prototypes from jpgfile.c int ReadJpegSections (FILE * infile, ReadMode_t ReadMode); void DiscardData(void); void DiscardAllButExif(void); int ReadJpegFile(const char * FileName, ReadMode_t ReadMode); int ReplaceThumbnail(const char * ThumbFileName); int SaveThumbnail(char * ThumbFileName); int RemoveSectionType(int SectionType); int RemoveUnknownSections(void); void WriteJpegFile(const char * FileName); Section_t * FindSection(int SectionType); Section_t * CreateSection(int SectionType, unsigned char * Data, int size); void ResetJpgfile(void); // Variables from jhead.c used by exif.c extern ImageInfo_t ImageInfo; extern int ShowTags; //-------------------------------------------------------------------------- // JPEG markers consist of one or more 0xFF bytes, followed by a marker // code byte (which is not an FF). Here are the marker codes of interest // in this program. (See jdmarker.c for a more complete list.) //-------------------------------------------------------------------------- #define M_SOF0 0xC0 // Start Of Frame N #define M_SOF1 0xC1 // N indicates which compression process #define M_SOF2 0xC2 // Only SOF0-SOF2 are now in common use #define M_SOF3 0xC3 #define M_SOF5 0xC5 // NB: codes C4 and CC are NOT SOF markers #define M_SOF6 0xC6 #define M_SOF7 0xC7 #define M_SOF9 0xC9 #define M_SOF10 0xCA #define M_SOF11 0xCB #define M_SOF13 0xCD #define M_SOF14 0xCE #define M_SOF15 0xCF #define M_SOI 0xD8 // Start Of Image (beginning of datastream) #define M_EOI 0xD9 // End Of Image (end of datastream) #define M_SOS 0xDA // Start Of Scan (begins compressed data) #define M_JFIF 0xE0 // Jfif marker #define M_EXIF 0xE1 // Exif marker. Also used for XMP data! #define M_XMP 0x10E1 // Not a real tag (same value in file as Exif!) #define M_COM 0xFE // COMment #define M_DQT 0xDB #define M_DHT 0xC4 #define M_DRI 0xDD #define M_IPTC 0xED // IPTC marker gpicview-0.2.4/src/file-dlgs.h0000644000000000000000000000214212231705732013030 00000000000000/* * file-dlgs.h * * Copyright 2009 Hong Jen Yee (PCMan) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. */ #ifndef _FILE_DLGS_H_ #define _FILE_DLGS_H_ #include G_BEGIN_DECLS char* get_open_filename( GtkWindow* parent, const char* cwd ); char* get_save_filename( GtkWindow* parent, const char* cwd, char** type ); G_END_DECLS #endif gpicview-0.2.4/src/image-view.h0000644000000000000000000000560012231705732013216 00000000000000/*************************************************************************** * Copyright (C) 2007 by PCMan (Hong Jen Yee) * * pcman.tw@gmail.com * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ #ifndef IMAGE_VIEW_H #define IMAGE_VIEW_H #include #include /** @author PCMan (Hong Jen Yee) */ #define IMAGE_VIEW_TYPE ( image_view_get_type ()) #define IMAGE_VIEW(obj) (G_TYPE_CHECK_INSTANCE_CAST ((obj), IMAGE_VIEW_TYPE, ImageView)) #define IMAGE_VIEW_CLASS(klass) (G_TYPE_CHECK_CLASS_CAST ((klass), IMAGE_VIEW_TYPE, ImageViewClass)) #define IS_IMAGE_VIEW(obj) (G_TYPE_CHECK_INSTANCE_TYPE ((obj), IMAGE_VIEW_TYPE)) #define IS_IMAGE_VIEW_CLASS(klass) (G_TYPE_CHECK_CLASS_TYPE ((klass), IMAGE_VIEW_TYPE)) #define IMAGE_VIEW_GET_CLASS(obj) (G_TYPE_INSTANCE_GET_CLASS ((obj), IMAGE_VIEW_TYPE, ImageViewClass)) typedef struct _ImageViewClass { GtkMiscClass parent_class; void (*set_scroll_adjustments)( GtkWidget* w, GtkAdjustment* h, GtkAdjustment* v ); }ImageViewClass; typedef struct _ImageView { GtkMisc parent; GtkAdjustment *hadj, *vadj; GdkPixbuf* pix; // GdkPixmap* buffer; // bool cached; gdouble scale; GdkInterpType interp_type; guint idle_handler; GdkRectangle img_area; GtkAllocation allocation; }ImageView; GtkWidget* image_view_new(); void image_view_set_pixbuf( ImageView* iv, GdkPixbuf* pixbuf ); gdouble image_view_get_scale( ImageView* iv ); void image_view_set_scale( ImageView* iv, gdouble new_scale, GdkInterpType type ); void image_view_get_size( ImageView* iv, int* w, int* h ); void image_view_set_adjustments( ImageView* iv, GtkAdjustment* h, GtkAdjustment* v ); GType image_view_get_type(); #endif gpicview-0.2.4/src/main-win.h0000644000000000000000000000742112231705732012706 00000000000000/*************************************************************************** * Copyright (C) 2007 by PCMan (Hong Jen Yee) * * pcman.tw@gmail.com * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ #ifndef MAINWIN_H #define MAINWIN_H #include #include #include "image-view.h" #include "image-list.h" /** @author PCMan (Hong Jen Yee) */ #define MAIN_WIN_TYPE (main_win_get_type ()) #define MAIN_WIN(obj) (G_TYPE_CHECK_INSTANCE_CAST ((obj), MAIN_WIN_TYPE, MainWin)) #define MAIN_WIN_CLASS(klass) (G_TYPE_CHECK_CLASS_CAST ((klass), MAIN_WIN_TYPE, MainWinClass)) #define IS_MAIN_WIN(obj) (G_TYPE_CHECK_INSTANCE_TYPE ((obj), MAIN_WIN_TYPE)) #define IS_MAIN_WIN_CLASS(klass) (G_TYPE_CHECK_CLASS_TYPE ((klass), MAIN_WIN_TYPE)) #define MAIN_WIN_GET_CLASS(obj) (G_TYPE_INSTANCE_GET_CLASS ((obj), MAIN_WIN_TYPE, MainWinClass)) typedef enum { ZOOM_NONE = 0, ZOOM_FIT, ZOOM_ORIG, ZOOM_SCALE } ZoomMode; typedef struct _MainWinClass { GtkWindowClass parent_class; } MainWinClass; typedef struct _MainWin { GtkWindow parent; GdkPixbuf* pix; GdkPixbufAnimation* animation; GdkPixbufAnimationIter* animation_iter; guint animation_timeout; GtkWidget* img_view; GtkWidget* scroll; GtkWidget* evt_box; GtkWidget* nav_bar; GtkWidget* btn_rotate_cw; GtkWidget* btn_rotate_ccw; GtkWidget* btn_flip_v; GtkWidget* btn_flip_h; GtkWidget* btn_orig; GtkWidget* btn_fit; GtkWidget* btn_play_stop; GtkWidget* img_play_stop; GtkWidget* percent; GdkCursor* hand_cursor; GtkAllocation scroll_allocation; ZoomMode zoom_mode; gboolean full_screen; gboolean slideshow_running; gboolean slideshow_cancelled; guint slide_timeout; gboolean dragging; double scale; int drag_old_x; int drag_old_y; int rotation_angle; ImageList* img_list; } MainWin; GtkWidget* main_win_new(); gboolean main_win_open( MainWin* mw, const char* file_path, ZoomMode zoom ); void main_win_start_slideshow( MainWin* mw ); void main_win_close( MainWin* mw ); gboolean main_win_save( MainWin* mw, const char* file_path, const char* type, gboolean confirm ); void main_win_show_error( MainWin* mw, const char* message ); void main_win_fit_size( MainWin* mw, int width, int height, gboolean can_strech, GdkInterpType type ); void main_win_fit_window_size( MainWin* mw, gboolean can_strech, GdkInterpType type ); void main_win_center_image( MainWin* mw ); gboolean main_win_scale_image( MainWin* mw, double new_scale, GdkInterpType type ); GType main_win_get_type(); #endif gpicview-0.2.4/configure0000755000000000000000000175560012231706056012150 00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.69 for gpicview 0.2.4. # # # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # Use a proper internal environment variable to ensure we don't fall # into an infinite loop, continuously re-executing ourselves. if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then _as_can_reexec=no; export _as_can_reexec; # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 as_fn_exit 255 fi # We don't want this to propagate to other subprocesses. { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : else exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1 test -x / || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 test \$(( 1 + 1 )) = 2 || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir/$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : CONFIG_SHELL=$as_shell as_have_required=yes if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : break 2 fi fi done;; esac as_found=false done $as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : CONFIG_SHELL=$SHELL as_have_required=yes fi; } IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : export CONFIG_SHELL # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi if test x$as_have_required = xno; then : $as_echo "$0: This script requires a shell more modern than all" $as_echo "$0: the shells that I found on your system." if test x${ZSH_VERSION+set} = xset ; then $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, $0: including any error possibly output before this $0: message. Then install a modern shell, or manually run $0: the script under such a shell if you do have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # If we had to re-execute with $CONFIG_SHELL, we're ensured to have # already done that, so ensure we don't try to do so again and fall # in an infinite loop. This has already happened in practice. _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" SHELL=${CONFIG_SHELL-/bin/sh} test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME='gpicview' PACKAGE_TARNAME='gpicview' PACKAGE_VERSION='0.2.4' PACKAGE_STRING='gpicview 0.2.4' PACKAGE_BUGREPORT='' PACKAGE_URL='' # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS LIBOBJS GETTEXT_PACKAGE X11_LIBS X11_CFLAGS GTK_LIBS GTK_CFLAGS PKG_CONFIG_LIBDIR PKG_CONFIG_PATH PKG_CONFIG ALL_LINGUAS INTLTOOL_PERL MSGMERGE INTLTOOL_POLICY_RULE INTLTOOL_SERVICE_RULE INTLTOOL_THEME_RULE INTLTOOL_SCHEMAS_RULE INTLTOOL_CAVES_RULE INTLTOOL_XML_NOMERGE_RULE INTLTOOL_XML_RULE INTLTOOL_KBD_RULE INTLTOOL_XAM_RULE INTLTOOL_UI_RULE INTLTOOL_SOUNDLIST_RULE INTLTOOL_SHEET_RULE INTLTOOL_SERVER_RULE INTLTOOL_PONG_RULE INTLTOOL_OAF_RULE INTLTOOL_PROP_RULE INTLTOOL_KEYS_RULE INTLTOOL_DIRECTORY_RULE INTLTOOL_DESKTOP_RULE intltool__v_merge_options_0 intltool__v_merge_options_ INTLTOOL_V_MERGE_OPTIONS INTLTOOL__v_MERGE_0 INTLTOOL__v_MERGE_ INTLTOOL_V_MERGE INTLTOOL_EXTRACT INTLTOOL_MERGE INTLTOOL_UPDATE MKINSTALLDIRS POSUB POFILES PO_IN_DATADIR_FALSE PO_IN_DATADIR_TRUE INTLLIBS INSTOBJEXT GMOFILES DATADIRNAME CATOBJEXT CATALOGS XGETTEXT GMSGFMT MSGFMT_OPTS MSGFMT USE_NLS ADDITIONAL_FLAGS CPP OTOOL64 OTOOL LIPO NMEDIT DSYMUTIL MANIFEST_TOOL RANLIB ac_ct_AR AR DLLTOOL OBJDUMP LN_S NM ac_ct_DUMPBIN DUMPBIN LD FGREP EGREP GREP SED am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE am__nodep AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__quote am__include DEPDIR OBJEXT EXEEXT ac_ct_CC CPPFLAGS LDFLAGS CFLAGS CC host_os host_vendor host_cpu host build_os build_vendor build_cpu build LIBTOOL MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE AM_BACKSLASH AM_DEFAULT_VERBOSITY AM_DEFAULT_V AM_V am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_silent_rules enable_maintainer_mode enable_shared enable_static with_pic enable_fast_install enable_dependency_tracking with_gnu_ld with_sysroot enable_libtool_lock enable_more_warnings enable_nls enable_gtk3 ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS CPP PKG_CONFIG PKG_CONFIG_PATH PKG_CONFIG_LIBDIR GTK_CFLAGS GTK_LIBS X11_CFLAGS X11_LIBS' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *=) ac_optarg= ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error $? "unrecognized option: \`$ac_option' Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures gpicview 0.2.4 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/gpicview] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of gpicview 0.2.4:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-silent-rules less verbose build output (undo: "make V=1") --disable-silent-rules verbose build output (undo: "make V=0") --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer --enable-shared[=PKGS] build shared libraries [default=yes] --enable-static[=PKGS] build static libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --enable-dependency-tracking do not reject slow dependency extractors --disable-dependency-tracking speeds up one-time build --disable-libtool-lock avoid locking (might break parallel builds) --enable-more-warnings Add more warnings [default=no] --disable-nls do not use Native Language Support --enable-gtk3 enable to use gtk-3.0 instead of gtk-2.0 Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use both] --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-sysroot=DIR Search for dependent libraries within DIR (or the compiler's sysroot if not specified). Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor PKG_CONFIG path to pkg-config utility PKG_CONFIG_PATH directories to add to pkg-config's search path PKG_CONFIG_LIBDIR path overriding pkg-config's built-in search path GTK_CFLAGS C compiler flags for GTK, overriding pkg-config GTK_LIBS linker flags for GTK, overriding pkg-config X11_CFLAGS C compiler flags for X11, overriding pkg-config X11_LIBS linker flags for X11, overriding pkg-config Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to the package provider. _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF gpicview configure 0.2.4 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_c_try_compile LINENO # -------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_compile # ac_fn_c_try_link LINENO # ----------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || test -x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_link # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_compile # ac_fn_c_try_cpp LINENO # ---------------------- # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } > conftest.i && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_cpp # ac_fn_c_try_run LINENO # ---------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. Assumes # that executables *can* be run. ac_fn_c_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then : ac_retval=0 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_run # ac_fn_c_check_func LINENO FUNC VAR # ---------------------------------- # Tests whether FUNC exists, setting the cache variable VAR accordingly ac_fn_c_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case declares $2. For example, HP-UX 11i declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $2 (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $2 /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$2 || defined __stub___$2 choke me #endif int main () { return $2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_func # ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists, giving a warning if it cannot be compiled using # the include files in INCLUDES and setting the cache variable VAR # accordingly. ac_fn_c_check_header_mongrel () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if eval \${$3+:} false; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 $as_echo_n "checking $2 usability... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_header_compiler=yes else ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 $as_echo_n "checking $2 presence... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <$2> _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : ac_header_preproc=yes else ac_header_preproc=no fi rm -f conftest.err conftest.i conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( yes:no: ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; no:yes:* ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=\$ac_header_compiler" fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_mongrel cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by gpicview $as_me 0.2.4, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo $as_echo "## ---------------- ## ## Cache variables. ## ## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo $as_echo "## ----------------- ## ## Output variables. ## ## ----------------- ##" echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then $as_echo "## ------------------- ## ## File substitutions. ## ## ------------------- ##" echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then $as_echo "## ----------- ## ## confdefs.h. ## ## ----------- ##" echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h $as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_URL "$PACKAGE_URL" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then # We do not want a PATH search for config.site. case $CONFIG_SITE in #(( -*) ac_site_file1=./$CONFIG_SITE;; */*) ac_site_file1=$CONFIG_SITE;; *) ac_site_file1=./$CONFIG_SITE;; esac elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" \ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Autotols programs am__api_version='1.14' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if ${ac_cv_path_install+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in #(( ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". as_fn_error $? "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi if test "$2" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$2" = conftest.file ) then # Ok. : else as_fn_error $? "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi rm -f conftest.file test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if ${ac_cv_path_mkdir+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AWK+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null # Check whether --enable-silent-rules was given. if test "${enable_silent_rules+set}" = set; then : enableval=$enable_silent_rules; fi case $enable_silent_rules in # ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=1;; esac am_make=${MAKE-make} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 $as_echo_n "checking whether $am_make supports nested variables... " >&6; } if ${am_cv_make_support_nested_variables+:} false; then : $as_echo_n "(cached) " >&6 else if $as_echo 'TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 $as_echo "$am_cv_make_support_nested_variables" >&6; } if test $am_cv_make_support_nested_variables = yes; then AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AM_BACKSLASH='\' if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE='gpicview' VERSION='0.2.4' cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # mkdir_p='$(MKDIR_P)' # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AMTAR='$${TAR-tar}' # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar pax cpio none' am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' # POSIX will say in a future version that running "rm -f" with no argument # is OK; and we want to be able to make that assumption in our Makefile # recipes. So use an aggressive probe to check that the usage we want is # actually supported "in the wild" to an acceptable degree. # See automake bug#10828. # To make any issue more visible, cause the running configure to be aborted # by default if the 'rm' program in use doesn't match our expectations; the # user can still override this though. if rm -f && rm -fr && rm -rf; then : OK; else cat >&2 <<'END' Oops! Your 'rm' program seems unable to run without file operands specified on the command line, even when the '-f' option is present. This is contrary to the behaviour of most rm programs out there, and not conforming with the upcoming POSIX standard: Please tell bug-automake@gnu.org about your system, including the value of your $PATH and any error possibly output before this message. This can help us improve future automake versions. END if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then echo 'Configuration will proceed anyway, since you have set the' >&2 echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 echo >&2 else cat >&2 <<'END' Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation that behaves properly: . If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM to "yes", and re-run configure. END as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } # Check whether --enable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then : enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval else USE_MAINTAINER_MODE=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 $as_echo "$USE_MAINTAINER_MODE" >&6; } if test $USE_MAINTAINER_MODE = yes; then MAINTAINER_MODE_TRUE= MAINTAINER_MODE_FALSE='#' else MAINTAINER_MODE_TRUE='#' MAINTAINER_MODE_FALSE= fi MAINT=$MAINTAINER_MODE_TRUE ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu case `pwd` in *\ * | *\ *) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 $as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; esac macro_version='2.4.2' macro_revision='1.3337' ltmain="$ac_aux_dir/ltmain.sh" # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } if ${ac_cv_build+:} false; then : $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; *) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' set x $ac_cv_build shift build_cpu=$1 build_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: build_os=$* IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } if ${ac_cv_host+:} false; then : $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; *) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' set x $ac_cv_host shift host_cpu=$1 host_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: host_os=$* IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac # Backslashify metacharacters that are still active within # double-quoted strings. sed_quote_subst='s/\(["`$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 $as_echo_n "checking how to print strings... " >&6; } # Test print first, because it will be a builtin if present. if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='print -r --' elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='printf %s\n' else # Use this function as a fallback that always works. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } ECHO='func_fallback_echo' fi # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "" } case "$ECHO" in printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 $as_echo "printf" >&6; } ;; print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 $as_echo "print -r" >&6; } ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 $as_echo "cat" >&6; } ;; esac DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 $as_echo_n "checking whether the C compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi if test -z "$ac_file"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error 77 "C compiler cannot create executables See \`config.log' for more details" "$LINENO" 5; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 $as_echo_n "checking for C compiler default output file name... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of executables: cannot compile and link See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { FILE *f = fopen ("conftest.out", "w"); return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files="$ac_clean_files conftest.out" # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } if test "$cross_compiling" != yes; then { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if { ac_try='./conftest$ac_cv_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details" "$LINENO" 5; } fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if ${ac_cv_objext+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of object files: cannot compile See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 $as_echo_n "checking whether $CC understands -c and -o together... " >&6; } if ${am_cv_prog_cc_c_o+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 $as_echo "$am_cv_prog_cc_c_o" >&6; } if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if ${am_cv_CC_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 $as_echo_n "checking for a sed that does not truncate output... " >&6; } if ${ac_cv_path_SED+:} false; then : $as_echo_n "(cached) " >&6 else ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ for ac_i in 1 2 3 4 5 6 7; do ac_script="$ac_script$as_nl$ac_script" done echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed { ac_script=; unset ac_script;} if test -z "$SED"; then ac_path_SED_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_SED" || continue # Check for GNU ac_path_SED and select it if it is found. # Check for GNU $ac_path_SED case `"$ac_path_SED" --version 2>&1` in *GNU*) ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo '' >> "conftest.nl" "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_SED_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_SED="$ac_path_SED" ac_path_SED_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_SED_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_SED"; then as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 fi else ac_cv_path_SED=$SED fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 $as_echo "$ac_cv_path_SED" >&6; } SED="$ac_cv_path_SED" rm -f conftest.sed test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if ${ac_cv_path_GREP+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_GREP" || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if ${ac_cv_path_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_EGREP" || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 $as_echo_n "checking for fgrep... " >&6; } if ${ac_cv_path_FGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 then ac_cv_path_FGREP="$GREP -F" else if test -z "$FGREP"; then ac_path_FGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in fgrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_FGREP" || continue # Check for GNU ac_path_FGREP and select it if it is found. # Check for GNU $ac_path_FGREP case `"$ac_path_FGREP" --version 2>&1` in *GNU*) ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'FGREP' >> "conftest.nl" "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_FGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_FGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_FGREP"; then as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_FGREP=$FGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 $as_echo "$ac_cv_path_FGREP" >&6; } FGREP="$ac_cv_path_FGREP" test -z "$GREP" && GREP=grep # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if ${lt_cv_path_LD+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if ${lt_cv_prog_gnu_ld+:} false; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } if ${lt_cv_path_NM+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done : ${lt_cv_path_NM=no} fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else if test -n "$ac_tool_prefix"; then for ac_prog in dumpbin "link -dump" do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DUMPBIN+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DUMPBIN"; then ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DUMPBIN=$ac_cv_prog_DUMPBIN if test -n "$DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 $as_echo "$DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$DUMPBIN" && break done fi if test -z "$DUMPBIN"; then ac_ct_DUMPBIN=$DUMPBIN for ac_prog in dumpbin "link -dump" do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DUMPBIN"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN if test -n "$ac_ct_DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 $as_echo "$ac_ct_DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_DUMPBIN" && break done if test "x$ac_ct_DUMPBIN" = x; then DUMPBIN=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DUMPBIN=$ac_ct_DUMPBIN fi fi case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols" ;; *) DUMPBIN=: ;; esac fi if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" fi fi test -z "$NM" && NM=nm { $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 $as_echo_n "checking the name lister ($NM) interface... " >&6; } if ${lt_cv_nm_interface+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 (eval echo "\"\$as_me:$LINENO: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 $as_echo "$lt_cv_nm_interface" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 $as_echo_n "checking whether ln -s works... " >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 $as_echo "no, using $LN_S" >&6; } fi # find the maximum length of command line arguments { $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 $as_echo_n "checking the maximum length of command line arguments... " >&6; } if ${lt_cv_sys_max_cmd_len+:} false; then : $as_echo_n "(cached) " >&6 else i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; mint*) # On MiNT this can take a long time and run out of memory. lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; os2*) # The test takes a long time on OS/2. lt_cv_sys_max_cmd_len=8192 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len" && \ test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8 ; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac fi if test -n $lt_cv_sys_max_cmd_len ; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 $as_echo "$lt_cv_sys_max_cmd_len" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 $as_echo "none" >&6; } fi max_cmd_len=$lt_cv_sys_max_cmd_len : ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ = c,a/b,b/c, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 $as_echo "$xsi_shell" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 $as_echo_n "checking whether the shell understands \"+=\"... " >&6; } lt_shell_append=no ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 $as_echo "$lt_shell_append" >&6; } if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 $as_echo_n "checking how to convert $build file names to $host format... " >&6; } if ${lt_cv_to_host_file_cmd+:} false; then : $as_echo_n "(cached) " >&6 else case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ;; esac ;; *-*-cygwin* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_noop ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ;; esac ;; * ) # unhandled hosts (and "normal" native builds) lt_cv_to_host_file_cmd=func_convert_file_noop ;; esac fi to_host_file_cmd=$lt_cv_to_host_file_cmd { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 $as_echo "$lt_cv_to_host_file_cmd" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 $as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } if ${lt_cv_to_tool_file_cmd+:} false; then : $as_echo_n "(cached) " >&6 else #assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac ;; esac fi to_tool_file_cmd=$lt_cv_to_tool_file_cmd { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 $as_echo "$lt_cv_to_tool_file_cmd" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 $as_echo_n "checking for $LD option to reload object files... " >&6; } if ${lt_cv_ld_reload_flag+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_reload_flag='-r' fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 $as_echo "$lt_cv_ld_reload_flag" >&6; } reload_flag=$lt_cv_ld_reload_flag case $reload_flag in "" | " "*) ;; *) reload_flag=" $reload_flag" ;; esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in cygwin* | mingw* | pw32* | cegcc*) if test "$GCC" != yes; then reload_cmds=false fi ;; darwin*) if test "$GCC" = yes; then reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' else reload_cmds='$LD$reload_flag -o $output$reload_objs' fi ;; esac if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OBJDUMP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OBJDUMP"; then ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 $as_echo "$OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OBJDUMP"; then ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OBJDUMP"; then ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OBJDUMP="objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 $as_echo "$ac_ct_OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OBJDUMP" = x; then OBJDUMP="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OBJDUMP=$ac_ct_OBJDUMP fi else OBJDUMP="$ac_cv_prog_OBJDUMP" fi test -z "$OBJDUMP" && OBJDUMP=objdump { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 $as_echo_n "checking how to recognize dependent libraries... " >&6; } if ${lt_cv_deplibs_check_method+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given extended regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix[4-9]*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi[45]*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin*) # func_win32_libid is a shell function defined in ltmain.sh lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' ;; mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc*) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; haiku*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[3-9]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 $as_echo "$lt_cv_deplibs_check_method" >&6; } file_magic_glob= want_nocaseglob=no if test "$build" = "$host"; then case $host_os in mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` fi ;; esac fi file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ac_tool_prefix}dlltool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DLLTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DLLTOOL"; then ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DLLTOOL=$ac_cv_prog_DLLTOOL if test -n "$DLLTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 $as_echo "$DLLTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DLLTOOL"; then ac_ct_DLLTOOL=$DLLTOOL # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DLLTOOL"; then ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DLLTOOL="dlltool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL if test -n "$ac_ct_DLLTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 $as_echo "$ac_ct_DLLTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DLLTOOL" = x; then DLLTOOL="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DLLTOOL=$ac_ct_DLLTOOL fi else DLLTOOL="$ac_cv_prog_DLLTOOL" fi test -z "$DLLTOOL" && DLLTOOL=dlltool { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 $as_echo_n "checking how to associate runtime and link libraries... " >&6; } if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh # decide which to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; esac ;; *) # fallback: assume linklib IS sharedlib lt_cv_sharedlib_from_linklib_cmd="$ECHO" ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 $as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO if test -n "$ac_tool_prefix"; then for ac_prog in ar do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AR+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AR"; then ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AR="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 $as_echo "$AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AR" && break done fi if test -z "$AR"; then ac_ct_AR=$AR for ac_prog in ar do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_AR+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_AR"; then ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_AR="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 $as_echo "$ac_ct_AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_AR" && break done if test "x$ac_ct_AR" = x; then AR="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac AR=$ac_ct_AR fi fi : ${AR=ar} : ${AR_FLAGS=cru} { $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 $as_echo_n "checking for archiver @FILE support... " >&6; } if ${lt_cv_ar_at_file+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ar_at_file=no cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 (eval $lt_ar_try) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if test "$ac_status" -eq 0; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 (eval $lt_ar_try) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if test "$ac_status" -ne 0; then lt_cv_ar_at_file=@ fi fi rm -f conftest.* libconftest.a fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 $as_echo "$lt_cv_ar_at_file" >&6; } if test "x$lt_cv_ar_at_file" = xno; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi test -z "$STRIP" && STRIP=: if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 $as_echo "$RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_RANLIB="ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 $as_echo "$ac_ct_RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_RANLIB" = x; then RANLIB=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac RANLIB=$ac_ct_RANLIB fi else RANLIB="$ac_cv_prog_RANLIB" fi test -z "$RANLIB" && RANLIB=: # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" fi case $host_os in darwin*) lock_old_archive_extraction=yes ;; *) lock_old_archive_extraction=no ;; esac # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Check for command to grab the raw symbol name followed by C symbol from nm. { $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } if ${lt_cv_sys_global_symbol_pipe+:} false; then : $as_echo_n "(cached) " >&6 else # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[BCDEGRST]' # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[ABCDGISTW]' ;; hpux*) if test "$host_cpu" = ia64; then symcode='[ABCDEGRST]' fi ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; osf*) symcode='[BCDEGQRST]' ;; solaris*) symcode='[BDRT]' ;; sco3.2v5*) symcode='[DT]' ;; sysv4.2uw2*) symcode='[DT]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[ABDT]' ;; sysv4) symcode='[DFNSTU]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[ABCDGIRSTW]' ;; esac # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function # and D for any global variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK '"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ " {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ " s[1]~/^[@?]/{print s[1], s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then # Now try to grab the symbols. nlist=conftest.nm if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined(__osf__) /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ LT_DLSYM_CONST struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&5 fi else echo "cannot find nm_test_var in $nlist" >&5 fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 fi else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done fi if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 $as_echo "failed" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 $as_echo "ok" >&6; } fi # Response file support. if test "$lt_cv_nm_interface" = "MS dumpbin"; then nm_file_list_spec='@' elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then nm_file_list_spec='@' fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 $as_echo_n "checking for sysroot... " >&6; } # Check whether --with-sysroot was given. if test "${with_sysroot+set}" = set; then : withval=$with_sysroot; else with_sysroot=no fi lt_sysroot= case ${with_sysroot} in #( yes) if test "$GCC" = yes; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 $as_echo "${with_sysroot}" >&6; } as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 $as_echo "${lt_sysroot:-no}" >&6; } # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then : enableval=$enable_libtool_lock; fi test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '#line '$LINENO' "configure"' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) case `/usr/bin/file conftest.o` in *x86-64*) LD="${LD-ld} -m elf32_x86_64" ;; *) LD="${LD-ld} -m elf_i386" ;; esac ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 $as_echo_n "checking whether the C compiler needs -belf... " >&6; } if ${lt_cv_cc_needs_belf+:} false; then : $as_echo_n "(cached) " >&6 else ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_cc_needs_belf=yes else lt_cv_cc_needs_belf=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 $as_echo "$lt_cv_cc_needs_belf" >&6; } if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; *-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) case $host in i?86-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) LD="${LD-ld} -m elf64_sparc" ;; esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then LD="${LD-ld}_sol2" fi ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. set dummy ${ac_tool_prefix}mt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$MANIFEST_TOOL"; then ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL if test -n "$MANIFEST_TOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 $as_echo "$MANIFEST_TOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_MANIFEST_TOOL"; then ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL # Extract the first word of "mt", so it can be a program name with args. set dummy mt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_MANIFEST_TOOL"; then ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL if test -n "$ac_ct_MANIFEST_TOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 $as_echo "$ac_ct_MANIFEST_TOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_MANIFEST_TOOL" = x; then MANIFEST_TOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL fi else MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" fi test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 $as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } if ${lt_cv_path_mainfest_tool+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&5 if $GREP 'Manifest Tool' conftest.out > /dev/null; then lt_cv_path_mainfest_tool=yes fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 $as_echo "$lt_cv_path_mainfest_tool" >&6; } if test "x$lt_cv_path_mainfest_tool" != xyes; then MANIFEST_TOOL=: fi case $host_os in rhapsody* | darwin*) if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DSYMUTIL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DSYMUTIL"; then ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DSYMUTIL=$ac_cv_prog_DSYMUTIL if test -n "$DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 $as_echo "$DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DSYMUTIL"; then ac_ct_DSYMUTIL=$DSYMUTIL # Extract the first word of "dsymutil", so it can be a program name with args. set dummy dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DSYMUTIL"; then ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL if test -n "$ac_ct_DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 $as_echo "$ac_ct_DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DSYMUTIL" = x; then DSYMUTIL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DSYMUTIL=$ac_ct_DSYMUTIL fi else DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. set dummy ${ac_tool_prefix}nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$NMEDIT"; then ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi NMEDIT=$ac_cv_prog_NMEDIT if test -n "$NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 $as_echo "$NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_NMEDIT"; then ac_ct_NMEDIT=$NMEDIT # Extract the first word of "nmedit", so it can be a program name with args. set dummy nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_NMEDIT"; then ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_NMEDIT="nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT if test -n "$ac_ct_NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 $as_echo "$ac_ct_NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_NMEDIT" = x; then NMEDIT=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac NMEDIT=$ac_ct_NMEDIT fi else NMEDIT="$ac_cv_prog_NMEDIT" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. set dummy ${ac_tool_prefix}lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$LIPO"; then ac_cv_prog_LIPO="$LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_LIPO="${ac_tool_prefix}lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi LIPO=$ac_cv_prog_LIPO if test -n "$LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 $as_echo "$LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_LIPO"; then ac_ct_LIPO=$LIPO # Extract the first word of "lipo", so it can be a program name with args. set dummy lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_LIPO"; then ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_LIPO="lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO if test -n "$ac_ct_LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 $as_echo "$ac_ct_LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_LIPO" = x; then LIPO=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac LIPO=$ac_ct_LIPO fi else LIPO="$ac_cv_prog_LIPO" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. set dummy ${ac_tool_prefix}otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL"; then ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OTOOL="${ac_tool_prefix}otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL=$ac_cv_prog_OTOOL if test -n "$OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 $as_echo "$OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL"; then ac_ct_OTOOL=$OTOOL # Extract the first word of "otool", so it can be a program name with args. set dummy otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL"; then ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OTOOL="otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL if test -n "$ac_ct_OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 $as_echo "$ac_ct_OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL" = x; then OTOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL=$ac_ct_OTOOL fi else OTOOL="$ac_cv_prog_OTOOL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. set dummy ${ac_tool_prefix}otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OTOOL64+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL64"; then ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL64=$ac_cv_prog_OTOOL64 if test -n "$OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 $as_echo "$OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL64"; then ac_ct_OTOOL64=$OTOOL64 # Extract the first word of "otool64", so it can be a program name with args. set dummy otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL64"; then ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OTOOL64="otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 if test -n "$ac_ct_OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 $as_echo "$ac_ct_OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL64" = x; then OTOOL64=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL64=$ac_ct_OTOOL64 fi else OTOOL64="$ac_cv_prog_OTOOL64" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 $as_echo_n "checking for -single_module linker flag... " >&6; } if ${lt_cv_apple_cc_single_mod+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&5 $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? # If there is a non-empty error log, and "single_module" # appears in it, assume the flag caused a linker warning if test -s conftest.err && $GREP single_module conftest.err; then cat conftest.err >&5 # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. elif test -f libconftest.dylib && test $_lt_result -eq 0; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&5 fi rm -rf libconftest.dylib* rm -f conftest.* fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 $as_echo "$lt_cv_apple_cc_single_mod" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } if ${lt_cv_ld_exported_symbols_list+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_ld_exported_symbols_list=yes else lt_cv_ld_exported_symbols_list=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 $as_echo_n "checking for -force_load linker flag... " >&6; } if ${lt_cv_ld_force_load+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_force_load=no cat > conftest.c << _LT_EOF int forced_loaded() { return 2;} _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 echo "$AR cru libconftest.a conftest.o" >&5 $AR cru libconftest.a conftest.o 2>&5 echo "$RANLIB libconftest.a" >&5 $RANLIB libconftest.a 2>&5 cat > conftest.c << _LT_EOF int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&5 elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then lt_cv_ld_force_load=yes else cat conftest.err >&5 fi rm -f conftest.err libconftest.a conftest conftest.c rm -rf conftest.dSYM fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 $as_echo "$lt_cv_ld_force_load" >&6; } case $host_os in rhapsody* | darwin1.[012]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[91]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[012]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if ${ac_cv_prog_CPP+:} false; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if ${ac_cv_header_stdc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in dlfcn.h do : ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default " if test "x$ac_cv_header_dlfcn_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_DLFCN_H 1 _ACEOF fi done # Set options enable_dlopen=no enable_win32_dll=no # Check whether --enable-shared was given. if test "${enable_shared+set}" = set; then : enableval=$enable_shared; p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac else enable_shared=yes fi # Check whether --enable-static was given. if test "${enable_static+set}" = set; then : enableval=$enable_static; p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac else enable_static=yes fi # Check whether --with-pic was given. if test "${with_pic+set}" = set; then : withval=$with_pic; lt_p=${PACKAGE-default} case $withval in yes|no) pic_mode=$withval ;; *) pic_mode=default # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for lt_pkg in $withval; do IFS="$lt_save_ifs" if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done IFS="$lt_save_ifs" ;; esac else pic_mode=default fi test -z "$pic_mode" && pic_mode=default # Check whether --enable-fast-install was given. if test "${enable_fast_install+set}" = set; then : enableval=$enable_fast_install; p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac else enable_fast_install=yes fi # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' test -z "$LN_S" && LN_S="ln -s" if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 $as_echo_n "checking for objdir... " >&6; } if ${lt_cv_objdir+:} false; then : $as_echo_n "(cached) " >&6 else rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 $as_echo "$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir cat >>confdefs.h <<_ACEOF #define LT_OBJDIR "$lt_cv_objdir/" _ACEOF case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } if ${lt_cv_path_MAGIC_CMD+:} false; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/${ac_tool_prefix}file; then lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 $as_echo_n "checking for file... " >&6; } if ${lt_cv_path_MAGIC_CMD+:} false; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/file; then lt_cv_path_MAGIC_CMD="$ac_dir/file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi else MAGIC_CMD=: fi fi fi ;; esac # Use C for the default configuration in the libtool script lt_save_CC="$CC" ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o objext=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* if test -n "$compiler"; then lt_prog_compiler_no_builtin_flag= if test "$GCC" = yes; then case $cc_basename in nvcc*) lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; *) lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-fno-rtti -fno-exceptions" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else : fi fi lt_prog_compiler_wl= lt_prog_compiler_pic= lt_prog_compiler_static= if test "$GCC" = yes; then lt_prog_compiler_wl='-Wl,' lt_prog_compiler_static='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support lt_prog_compiler_pic='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic='-fno-common' ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. lt_prog_compiler_static= ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) lt_prog_compiler_pic='-fPIC' ;; esac ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. lt_prog_compiler_can_build_shared=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic=-Kconform_pic fi ;; *) lt_prog_compiler_pic='-fPIC' ;; esac case $cc_basename in nvcc*) # Cuda Compiler Driver 2.2 lt_prog_compiler_wl='-Xlinker ' if test -n "$lt_prog_compiler_pic"; then lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" fi ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) lt_prog_compiler_wl='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' else lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' fi ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' ;; hpux9* | hpux10* | hpux11*) lt_prog_compiler_wl='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? lt_prog_compiler_static='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) lt_prog_compiler_wl='-Wl,' # PIC (with -KPIC) is the default. lt_prog_compiler_static='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; # Lahey Fortran 8.1. lf95*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='--shared' lt_prog_compiler_static='--static' ;; nagfor*) # NAG Fortran compiler lt_prog_compiler_wl='-Wl,-Wl,,' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; ccc*) lt_prog_compiler_wl='-Wl,' # All Alpha code is PIC. lt_prog_compiler_static='-non_shared' ;; xl* | bgxl* | bgf* | mpixl*) # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-qpic' lt_prog_compiler_static='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='' ;; *Sun\ F* | *Sun*Fortran*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Qoption ld ' ;; *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Wl,' ;; *Intel*\ [CF]*Compiler*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; *Portland\ Group*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; esac ;; esac ;; newsos6) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; osf3* | osf4* | osf5*) lt_prog_compiler_wl='-Wl,' # All OSF/1 code is PIC. lt_prog_compiler_static='-non_shared' ;; rdos*) lt_prog_compiler_static='-non_shared' ;; solaris*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' case $cc_basename in f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) lt_prog_compiler_wl='-Qoption ld ';; *) lt_prog_compiler_wl='-Wl,';; esac ;; sunos4*) lt_prog_compiler_wl='-Qoption ld ' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_prog_compiler_pic='-Kconform_pic' lt_prog_compiler_static='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; unicos*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_can_build_shared=no ;; uts4*) lt_prog_compiler_pic='-pic' lt_prog_compiler_static='-Bstatic' ;; *) lt_prog_compiler_can_build_shared=no ;; esac fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= ;; *) lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 $as_echo_n "checking for $compiler option to produce PIC... " >&6; } if ${lt_cv_prog_compiler_pic+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic=$lt_prog_compiler_pic fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 $as_echo "$lt_cv_prog_compiler_pic" >&6; } lt_prog_compiler_pic=$lt_cv_prog_compiler_pic # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } if ${lt_cv_prog_compiler_pic_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic -DPIC" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } if test x"$lt_cv_prog_compiler_pic_works" = xyes; then case $lt_prog_compiler_pic in "" | " "*) ;; *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; esac else lt_prog_compiler_pic= lt_prog_compiler_can_build_shared=no fi fi # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } if ${lt_cv_prog_compiler_static_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works=yes fi else lt_cv_prog_compiler_static_works=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } if test x"$lt_cv_prog_compiler_static_works" = xyes; then : else lt_prog_compiler_static= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } runpath_var= allow_undefined_flag= always_export_symbols=no archive_cmds= archive_expsym_cmds= compiler_needs_object=no enable_shared_with_static_runtimes=no export_dynamic_flag_spec= export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' hardcode_automatic=no hardcode_direct=no hardcode_direct_absolute=no hardcode_libdir_flag_spec= hardcode_libdir_separator= hardcode_minus_L=no hardcode_shlibpath_var=unsupported inherit_rpath=no link_all_deplibs=unknown module_cmds= module_expsym_cmds= old_archive_from_new_cmds= old_archive_from_expsyms_cmds= thread_safe_flag_spec= whole_archive_flag_spec= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) link_all_deplibs=no ;; esac ld_shlibs=yes # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility # with the native linker. However, as the warning in the GNU ld # block says, versions before 2.19.5* couldn't really create working # shared libraries, regardless of the interface used. case `$LD -v 2>&1` in *\ \(GNU\ Binutils\)\ 2.19.5*) ;; *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; *\ \(GNU\ Binutils\)\ [3-9]*) ;; *) lt_use_gnu_ld_interface=yes ;; esac ;; *) lt_use_gnu_ld_interface=yes ;; esac fi if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec= fi supports_anon_versioning=no case `$LD -v 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to install binutils *** 2.20 or above, or modify your PATH so that a non-GNU linker is found. *** You will then need to restart the configuration process. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' export_dynamic_flag_spec='${wl}--export-all-symbols' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs=no fi ;; haiku*) archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' link_all_deplibs=yes ;; interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec= tmp_sharedflag='--shared' ;; xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi case $cc_basename in xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else ld_shlibs=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = no; then runpath_var= hardcode_libdir_flag_spec= export_dynamic_flag_spec= whole_archive_flag_spec= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm # Also, AIX nm treats weak defined symbols like other global # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds='' hardcode_direct=yes hardcode_direct_absolute=yes hardcode_libdir_separator=':' link_all_deplibs=yes file_list_spec='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi link_all_deplibs=no else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi export_dynamic_flag_spec='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an # empty executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath_ fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. if test "${lt_cv_aix_libpath+set}" = set; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_="/usr/lib:/lib" fi fi aix_libpath=$lt_cv_aix_libpath_ fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag=' ${wl}-bernotok' allow_undefined_flag=' ${wl}-berok' if test "$with_gnu_ld" = yes; then # We only use this code for GNU lds that support --whole-archive. whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec='$convenience' fi archive_cmds_need_lc=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; bsdi[45]*) export_dynamic_flag_spec=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in cl*) # Native MSVC hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported always_export_symbols=yes file_list_spec='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; else sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, )='true' enable_shared_with_static_runtimes=yes exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' # Don't use ranlib old_postinstall_cmds='chmod 644 $oldlib' postlink_cmds='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile="$lt_outputfile.exe" lt_tool_outputfile="$lt_tool_outputfile.exe" ;; esac~ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # Assume MSVC wrapper hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_from_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' enable_shared_with_static_runtimes=yes ;; esac ;; darwin* | rhapsody*) archive_cmds_need_lc=no hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported if test "$lt_cv_ld_force_load" = "yes"; then whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec='' fi link_all_deplibs=yes allow_undefined_flag="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" else ld_shlibs=no fi ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2.*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; hpux9*) if test "$GCC" = yes; then archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes export_dynamic_flag_spec='${wl}-E' ;; hpux10*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes fi ;; hpux11*) if test "$GCC" = yes && test "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) # Older versions of the 11.00 compiler do not understand -b yet # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 $as_echo_n "checking if $CC understands -b... " >&6; } if ${lt_cv_prog_compiler__b+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler__b=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -b" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler__b=yes fi else lt_cv_prog_compiler__b=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 $as_echo "$lt_cv_prog_compiler__b" >&6; } if test x"$lt_cv_prog_compiler__b" = xyes; then archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi ;; esac fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: case $host_cpu in hppa*64*|ia64*) hardcode_direct=no hardcode_shlibpath_var=no ;; *) hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 $as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } if ${lt_cv_irix_exported_symbol+:} false; then : $as_echo_n "(cached) " >&6 else save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int foo (void) { return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_irix_exported_symbol=yes else lt_cv_irix_exported_symbol=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 $as_echo "$lt_cv_irix_exported_symbol" >&6; } if test "$lt_cv_irix_exported_symbol" = yes; then archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' fi else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: inherit_rpath=yes link_all_deplibs=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no hardcode_direct_absolute=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' else case $host_os in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-R$libdir' ;; *) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi else ld_shlibs=no fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi archive_cmds_need_lc='no' hardcode_libdir_separator=: ;; solaris*) no_undefined_flag=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='${wl}' archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else whole_archive_flag_spec='-z allextract$convenience -z defaultextract' fi ;; esac link_all_deplibs=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) case $host_vendor in sni) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' reload_cmds='$CC -r -o $output$reload_objs' hardcode_direct=no ;; motorola) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag='${wl}-z,text' archive_cmds_need_lc=no hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag='${wl}-z,text' allow_undefined_flag='${wl}-z,nodefs' archive_cmds_need_lc=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-R,$libdir' hardcode_libdir_separator=':' link_all_deplibs=yes export_dynamic_flag_spec='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac if test x$host_vendor = xsni; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) export_dynamic_flag_spec='${wl}-Blargedynsym' ;; esac fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } test "$ld_shlibs" = no && can_build_shared=no with_gnu_ld=$with_gnu_ld # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc" in x|xyes) # Assume -lc should be added archive_cmds_need_lc=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } if ${lt_cv_archive_cmds_need_lc+:} false; then : $as_echo_n "(cached) " >&6 else $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl pic_flag=$lt_prog_compiler_pic compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then lt_cv_archive_cmds_need_lc=no else lt_cv_archive_cmds_need_lc=yes fi allow_undefined_flag=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 $as_echo "$lt_cv_archive_cmds_need_lc" >&6; } archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc ;; esac fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac case $host_os in mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; *) lt_sed_strip_eq="s,=/,/,g" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` ;; *) lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` ;; esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[lt_foo]++; } if (lt_freq[lt_foo] == 1) { print lt_foo; } }'` # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's,/\([A-Za-z]:\),\1,g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' library_names_spec='${libname}.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec="$LIB" if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[23].*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=yes sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[3-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH if ${lt_cv_shlibpath_overrides_runpath+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : lt_cv_shlibpath_overrides_runpath=yes fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir fi shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || test -n "$runpath_var" || test "X$hardcode_automatic" = "Xyes" ; then # We can hardcode non-existent directories. if test "$hardcode_direct" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && test "$hardcode_minus_L" != no; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action=unsupported fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } if test "$hardcode_action" = relink || test "$inherit_rpath" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes fi ;; *) ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" if test "x$ac_cv_func_shl_load" = xyes; then : lt_cv_dlopen="shl_load" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } if ${ac_cv_lib_dld_shl_load+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load (); int main () { return shl_load (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_shl_load=yes else ac_cv_lib_dld_shl_load=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } if test "x$ac_cv_lib_dld_shl_load" = xyes; then : lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" else ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" if test "x$ac_cv_func_dlopen" = xyes; then : lt_cv_dlopen="dlopen" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } if ${ac_cv_lib_svld_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_svld_dlopen=yes else ac_cv_lib_svld_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } if test "x$ac_cv_lib_svld_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } if ${ac_cv_lib_dld_dld_link+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dld_link (); int main () { return dld_link (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_dld_link=yes else ac_cv_lib_dld_dld_link=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } if test "x$ac_cv_lib_dld_dld_link" = xyes; then : lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" fi fi fi fi fi fi ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 $as_echo_n "checking whether a program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; esac else : # compilation failed lt_cv_dlopen_self=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self_static+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisbility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; esac else : # compilation failed lt_cv_dlopen_self_static=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 $as_echo "$lt_cv_dlopen_self_static" >&6; } fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi striplib= old_striplib= { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 $as_echo_n "checking whether stripping libraries is possible... " >&6; } if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } ;; esac fi # Report which library types will actually be built { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 $as_echo_n "checking if libtool supports shared libraries... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 $as_echo "$can_build_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 $as_echo_n "checking whether to build shared libraries... " >&6; } test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[4-9]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 $as_echo "$enable_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 $as_echo_n "checking whether to build static libraries... " >&6; } # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 $as_echo "$enable_static" >&6; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC="$lt_save_CC" ac_config_commands="$ac_config_commands libtool" # Only expand once: { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing strerror" >&5 $as_echo_n "checking for library containing strerror... " >&6; } if ${ac_cv_search_strerror+:} false; then : $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char strerror (); int main () { return strerror (); ; return 0; } _ACEOF for ac_lib in '' cposix; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi if ac_fn_c_try_link "$LINENO"; then : ac_cv_search_strerror=$ac_res fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext if ${ac_cv_search_strerror+:} false; then : break fi done if ${ac_cv_search_strerror+:} false; then : else ac_cv_search_strerror=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_strerror" >&5 $as_echo "$ac_cv_search_strerror" >&6; } ac_res=$ac_cv_search_strerror if test "$ac_res" != no; then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 $as_echo_n "checking whether $CC understands -c and -o together... " >&6; } if ${am_cv_prog_cc_c_o+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 $as_echo "$am_cv_prog_cc_c_o" >&6; } if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if ${am_cv_CC_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 $as_echo_n "checking whether $CC understands -c and -o together... " >&6; } if ${am_cv_prog_cc_c_o+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 $as_echo "$am_cv_prog_cc_c_o" >&6; } if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if ${am_cv_CC_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi am_cv_prog_cc_stdc=$ac_cv_prog_cc_stdc { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if ${ac_cv_header_stdc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi # Support silent build rules. Disable by either passing --disable-silent-rules # to configure or passing V=1 to make # Check whether --enable-silent-rules was given. if test "${enable_silent_rules+set}" = set; then : enableval=$enable_silent_rules; fi case $enable_silent_rules in # ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=0;; esac am_make=${MAKE-make} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 $as_echo_n "checking whether $am_make supports nested variables... " >&6; } if ${am_cv_make_support_nested_variables+:} false; then : $as_echo_n "(cached) " >&6 else if $as_echo 'TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 $as_echo "$am_cv_make_support_nested_variables" >&6; } if test $am_cv_make_support_nested_variables = yes; then AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AM_BACKSLASH='\' ac_config_headers="$ac_config_headers config.h" # Check whether --enable-more_warnings was given. if test "${enable_more_warnings+set}" = set; then : enableval=$enable_more_warnings; enable_more_warnings="${enableval}" else enable_more_warnings=no fi if test x"$enable_more_warnings" = x"yes"; then ADDITIONAL_FLAGS="-Wall -Werror=all -Werror=format -Werror=implicit-function-declaration -Werror=implicit-int -Werror=missing-braces -Werror=parentheses -Werror=return-type -Werror=strict-aliasing -Werror=switch -Wuninitialized -Werror=unused-label -Werror=unused-value -Wextra -Wno-missing-field-initializers -Wno-unused-parameter -Werror=missing-declarations -Wredundant-decls -Wmissing-noreturn -Wpointer-arith -Wcast-align -Wwrite-strings -Werror=inline -Werror=format-nonliteral -Wformat-nonliteral -Werror=format-security -Wformat-security -Winit-self -Werror=missing-include-dirs -Werror=undef -Werror=aggregate-return -Wmissing-format-attribute -Werror=nested-externs -fno-strict-aliasing -fmessage-length=0 -Wp,-D_FORTIFY_SOURCE=2 -DG_DISABLE_DEPRECATED -DG_DISABLE_SINGLE_INCLUDES -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_SINGLE_INCLUDES -DGTK_DISABLE_DEPRECATED -DGTK_DISABLE_SINGLE_INCLUDES" fi for ac_header in locale.h do : ac_fn_c_check_header_mongrel "$LINENO" "locale.h" "ac_cv_header_locale_h" "$ac_includes_default" if test "x$ac_cv_header_locale_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LOCALE_H 1 _ACEOF fi done if test $ac_cv_header_locale_h = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LC_MESSAGES" >&5 $as_echo_n "checking for LC_MESSAGES... " >&6; } if ${am_cv_val_LC_MESSAGES+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { return LC_MESSAGES ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : am_cv_val_LC_MESSAGES=yes else am_cv_val_LC_MESSAGES=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_val_LC_MESSAGES" >&5 $as_echo "$am_cv_val_LC_MESSAGES" >&6; } if test $am_cv_val_LC_MESSAGES = yes; then $as_echo "#define HAVE_LC_MESSAGES 1" >>confdefs.h fi fi USE_NLS=yes gt_cv_have_gettext=no CATOBJEXT=NONE XGETTEXT=: INTLLIBS= ac_fn_c_check_header_mongrel "$LINENO" "libintl.h" "ac_cv_header_libintl_h" "$ac_includes_default" if test "x$ac_cv_header_libintl_h" = xyes; then : gt_cv_func_dgettext_libintl="no" libintl_extra_libs="" # # First check in libc # { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ngettext in libc" >&5 $as_echo_n "checking for ngettext in libc... " >&6; } if ${gt_cv_func_ngettext_libc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { return !ngettext ("","", 1) ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : gt_cv_func_ngettext_libc=yes else gt_cv_func_ngettext_libc=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_ngettext_libc" >&5 $as_echo "$gt_cv_func_ngettext_libc" >&6; } if test "$gt_cv_func_ngettext_libc" = "yes" ; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dgettext in libc" >&5 $as_echo_n "checking for dgettext in libc... " >&6; } if ${gt_cv_func_dgettext_libc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { return !dgettext ("","") ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : gt_cv_func_dgettext_libc=yes else gt_cv_func_dgettext_libc=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_dgettext_libc" >&5 $as_echo "$gt_cv_func_dgettext_libc" >&6; } fi if test "$gt_cv_func_ngettext_libc" = "yes" ; then for ac_func in bind_textdomain_codeset do : ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" if test "x$ac_cv_func_bind_textdomain_codeset" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_BIND_TEXTDOMAIN_CODESET 1 _ACEOF fi done fi # # If we don't have everything we want, check in libintl # if test "$gt_cv_func_dgettext_libc" != "yes" \ || test "$gt_cv_func_ngettext_libc" != "yes" \ || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for bindtextdomain in -lintl" >&5 $as_echo_n "checking for bindtextdomain in -lintl... " >&6; } if ${ac_cv_lib_intl_bindtextdomain+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lintl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char bindtextdomain (); int main () { return bindtextdomain (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_intl_bindtextdomain=yes else ac_cv_lib_intl_bindtextdomain=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_bindtextdomain" >&5 $as_echo "$ac_cv_lib_intl_bindtextdomain" >&6; } if test "x$ac_cv_lib_intl_bindtextdomain" = xyes; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ngettext in -lintl" >&5 $as_echo_n "checking for ngettext in -lintl... " >&6; } if ${ac_cv_lib_intl_ngettext+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lintl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char ngettext (); int main () { return ngettext (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_intl_ngettext=yes else ac_cv_lib_intl_ngettext=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_ngettext" >&5 $as_echo "$ac_cv_lib_intl_ngettext" >&6; } if test "x$ac_cv_lib_intl_ngettext" = xyes; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dgettext in -lintl" >&5 $as_echo_n "checking for dgettext in -lintl... " >&6; } if ${ac_cv_lib_intl_dgettext+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lintl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dgettext (); int main () { return dgettext (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_intl_dgettext=yes else ac_cv_lib_intl_dgettext=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_dgettext" >&5 $as_echo "$ac_cv_lib_intl_dgettext" >&6; } if test "x$ac_cv_lib_intl_dgettext" = xyes; then : gt_cv_func_dgettext_libintl=yes fi fi fi if test "$gt_cv_func_dgettext_libintl" != "yes" ; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking if -liconv is needed to use gettext" >&5 $as_echo_n "checking if -liconv is needed to use gettext... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: " >&5 $as_echo "" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ngettext in -lintl" >&5 $as_echo_n "checking for ngettext in -lintl... " >&6; } if ${ac_cv_lib_intl_ngettext+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lintl -liconv $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char ngettext (); int main () { return ngettext (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_intl_ngettext=yes else ac_cv_lib_intl_ngettext=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_ngettext" >&5 $as_echo "$ac_cv_lib_intl_ngettext" >&6; } if test "x$ac_cv_lib_intl_ngettext" = xyes; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dcgettext in -lintl" >&5 $as_echo_n "checking for dcgettext in -lintl... " >&6; } if ${ac_cv_lib_intl_dcgettext+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lintl -liconv $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dcgettext (); int main () { return dcgettext (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_intl_dcgettext=yes else ac_cv_lib_intl_dcgettext=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_dcgettext" >&5 $as_echo "$ac_cv_lib_intl_dcgettext" >&6; } if test "x$ac_cv_lib_intl_dcgettext" = xyes; then : gt_cv_func_dgettext_libintl=yes libintl_extra_libs=-liconv else : fi else : fi fi # # If we found libintl, then check in it for bind_textdomain_codeset(); # we'll prefer libc if neither have bind_textdomain_codeset(), # and both have dgettext and ngettext # if test "$gt_cv_func_dgettext_libintl" = "yes" ; then glib_save_LIBS="$LIBS" LIBS="$LIBS -lintl $libintl_extra_libs" unset ac_cv_func_bind_textdomain_codeset for ac_func in bind_textdomain_codeset do : ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" if test "x$ac_cv_func_bind_textdomain_codeset" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_BIND_TEXTDOMAIN_CODESET 1 _ACEOF fi done LIBS="$glib_save_LIBS" if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then gt_cv_func_dgettext_libc=no else if test "$gt_cv_func_dgettext_libc" = "yes" \ && test "$gt_cv_func_ngettext_libc" = "yes"; then gt_cv_func_dgettext_libintl=no fi fi fi fi if test "$gt_cv_func_dgettext_libc" = "yes" \ || test "$gt_cv_func_dgettext_libintl" = "yes"; then gt_cv_have_gettext=yes fi if test "$gt_cv_func_dgettext_libintl" = "yes"; then INTLLIBS="-lintl $libintl_extra_libs" fi if test "$gt_cv_have_gettext" = "yes"; then $as_echo "#define HAVE_GETTEXT 1" >>confdefs.h # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_MSGFMT+:} false; then : $as_echo_n "(cached) " >&6 else case "$MSGFMT" in /*) ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then ac_cv_path_MSGFMT="$ac_dir/$ac_word" break fi fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no" ;; esac fi MSGFMT="$ac_cv_path_MSGFMT" if test "$MSGFMT" != "no"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 $as_echo "$MSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "$MSGFMT" != "no"; then glib_save_LIBS="$LIBS" LIBS="$LIBS $INTLLIBS" for ac_func in dcgettext do : ac_fn_c_check_func "$LINENO" "dcgettext" "ac_cv_func_dcgettext" if test "x$ac_cv_func_dcgettext" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_DCGETTEXT 1 _ACEOF fi done MSGFMT_OPTS= { $as_echo "$as_me:${as_lineno-$LINENO}: checking if msgfmt accepts -c" >&5 $as_echo_n "checking if msgfmt accepts -c... " >&6; } cat >conftest.foo <<_ACEOF msgid "" msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Project-Id-Version: test 1.0\n" "PO-Revision-Date: 2007-02-15 12:01+0100\n" "Last-Translator: test \n" "Language-Team: C \n" "MIME-Version: 1.0\n" "Content-Transfer-Encoding: 8bit\n" _ACEOF if { { $as_echo "$as_me:${as_lineno-$LINENO}: \$MSGFMT -c -o /dev/null conftest.foo"; } >&5 ($MSGFMT -c -o /dev/null conftest.foo) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then MSGFMT_OPTS=-c; { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } echo "$as_me: failed input was:" >&5 sed 's/^/| /' conftest.foo >&5 fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_GMSGFMT+:} false; then : $as_echo_n "(cached) " >&6 else case $GMSGFMT in [\\/]* | ?:[\\/]*) ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ;; esac fi GMSGFMT=$ac_cv_path_GMSGFMT if test -n "$GMSGFMT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 $as_echo "$GMSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_XGETTEXT+:} false; then : $as_echo_n "(cached) " >&6 else case "$XGETTEXT" in /*) ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then ac_cv_path_XGETTEXT="$ac_dir/$ac_word" break fi fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" ;; esac fi XGETTEXT="$ac_cv_path_XGETTEXT" if test "$XGETTEXT" != ":"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 $as_echo "$XGETTEXT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : CATOBJEXT=.gmo DATADIRNAME=share else case $host in *-*-solaris*) ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" if test "x$ac_cv_func_bind_textdomain_codeset" = xyes; then : CATOBJEXT=.gmo DATADIRNAME=share else CATOBJEXT=.mo DATADIRNAME=lib fi ;; *-*-openbsd*) CATOBJEXT=.mo DATADIRNAME=share ;; *) CATOBJEXT=.mo DATADIRNAME=lib ;; esac fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS="$glib_save_LIBS" INSTOBJEXT=.mo else gt_cv_have_gettext=no fi fi fi if test "$gt_cv_have_gettext" = "yes" ; then $as_echo "#define ENABLE_NLS 1" >>confdefs.h fi if test "$XGETTEXT" != ":"; then if $XGETTEXT --omit-header /dev/null 2> /dev/null; then : ; else { $as_echo "$as_me:${as_lineno-$LINENO}: result: found xgettext program is not GNU xgettext; ignore it" >&5 $as_echo "found xgettext program is not GNU xgettext; ignore it" >&6; } XGETTEXT=":" fi fi # We need to process the po/ directory. POSUB=po ac_config_commands="$ac_config_commands default-1" for lang in $ALL_LINGUAS; do GMOFILES="$GMOFILES $lang.gmo" POFILES="$POFILES $lang.po" done if test "$gt_cv_have_gettext" = "yes"; then if test "x$ALL_LINGUAS" = "x"; then LINGUAS= else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for catalogs to be installed" >&5 $as_echo_n "checking for catalogs to be installed... " >&6; } NEW_LINGUAS= for presentlang in $ALL_LINGUAS; do useit=no if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then desiredlanguages="$LINGUAS" else desiredlanguages="$ALL_LINGUAS" fi for desiredlang in $desiredlanguages; do # Use the presentlang catalog if desiredlang is # a. equal to presentlang, or # b. a variant of presentlang (because in this case, # presentlang can be used as a fallback for messages # which are not translated in the desiredlang catalog). case "$desiredlang" in "$presentlang"*) useit=yes;; esac done if test $useit = yes; then NEW_LINGUAS="$NEW_LINGUAS $presentlang" fi done LINGUAS=$NEW_LINGUAS { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LINGUAS" >&5 $as_echo "$LINGUAS" >&6; } fi if test -n "$LINGUAS"; then for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done fi fi MKINSTALLDIRS= if test -n "$ac_aux_dir"; then MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" fi if test -z "$MKINSTALLDIRS"; then MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" fi test -d po || mkdir po if test "x$srcdir" != "x."; then if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then posrcprefix="$srcdir/" else posrcprefix="../$srcdir/" fi else posrcprefix="../" fi rm -f po/POTFILES sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ < $srcdir/po/POTFILES.in > po/POTFILES { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 $as_echo_n "checking whether NLS is requested... " >&6; } # Check whether --enable-nls was given. if test "${enable_nls+set}" = set; then : enableval=$enable_nls; USE_NLS=$enableval else USE_NLS=yes fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 $as_echo "$USE_NLS" >&6; } case "$am__api_version" in 1.01234) as_fn_error $? "Automake 1.5 or newer is required to use intltool" "$LINENO" 5 ;; *) ;; esac INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.40.0 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` if test -n "0.40.0"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for intltool >= 0.40.0" >&5 $as_echo_n "checking for intltool >= 0.40.0... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_APPLIED_VERSION found" >&5 $as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; } test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || as_fn_error $? "Your intltool is too old. You need intltool 0.40.0 or later." "$LINENO" 5 fi # Extract the first word of "intltool-update", so it can be a program name with args. set dummy intltool-update; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_INTLTOOL_UPDATE+:} false; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_UPDATE in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_UPDATE="$INTLTOOL_UPDATE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE if test -n "$INTLTOOL_UPDATE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_UPDATE" >&5 $as_echo "$INTLTOOL_UPDATE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "intltool-merge", so it can be a program name with args. set dummy intltool-merge; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_INTLTOOL_MERGE+:} false; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_MERGE in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_MERGE="$INTLTOOL_MERGE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE if test -n "$INTLTOOL_MERGE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_MERGE" >&5 $as_echo "$INTLTOOL_MERGE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "intltool-extract", so it can be a program name with args. set dummy intltool-extract; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_INTLTOOL_EXTRACT+:} false; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_EXTRACT in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_EXTRACT="$INTLTOOL_EXTRACT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT if test -n "$INTLTOOL_EXTRACT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_EXTRACT" >&5 $as_echo "$INTLTOOL_EXTRACT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then as_fn_error $? "The intltool scripts were not found. Please install intltool." "$LINENO" 5 fi if test -z "$AM_DEFAULT_VERBOSITY"; then AM_DEFAULT_VERBOSITY=1 fi INTLTOOL_V_MERGE='$(INTLTOOL__v_MERGE_$(V))' INTLTOOL__v_MERGE_='$(INTLTOOL__v_MERGE_$(AM_DEFAULT_VERBOSITY))' INTLTOOL__v_MERGE_0='@echo " ITMRG " $@;' INTLTOOL_V_MERGE_OPTIONS='$(intltool__v_merge_options_$(V))' intltool__v_merge_options_='$(intltool__v_merge_options_$(AM_DEFAULT_VERBOSITY))' intltool__v_merge_options_0='-q' INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -p $(top_srcdir)/po $< $@' INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge 5000; then INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u --no-translations $< $@' else INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)_it_tmp_dir=tmp.intltool.$$RANDOM && mkdir $$_it_tmp_dir && LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u $$_it_tmp_dir $< $@ && rmdir $$_it_tmp_dir' fi INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' # Check the gettext tools to make sure they are GNU # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_XGETTEXT+:} false; then : $as_echo_n "(cached) " >&6 else case $XGETTEXT in [\\/]* | ?:[\\/]*) ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi XGETTEXT=$ac_cv_path_XGETTEXT if test -n "$XGETTEXT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 $as_echo "$XGETTEXT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "msgmerge", so it can be a program name with args. set dummy msgmerge; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_MSGMERGE+:} false; then : $as_echo_n "(cached) " >&6 else case $MSGMERGE in [\\/]* | ?:[\\/]*) ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi MSGMERGE=$ac_cv_path_MSGMERGE if test -n "$MSGMERGE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 $as_echo "$MSGMERGE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_MSGFMT+:} false; then : $as_echo_n "(cached) " >&6 else case $MSGFMT in [\\/]* | ?:[\\/]*) ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi MSGFMT=$ac_cv_path_MSGFMT if test -n "$MSGFMT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 $as_echo "$MSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_GMSGFMT+:} false; then : $as_echo_n "(cached) " >&6 else case $GMSGFMT in [\\/]* | ?:[\\/]*) ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ;; esac fi GMSGFMT=$ac_cv_path_GMSGFMT if test -n "$GMSGFMT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 $as_echo "$GMSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 fi xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 fi # Extract the first word of "perl", so it can be a program name with args. set dummy perl; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_INTLTOOL_PERL+:} false; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_PERL in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL if test -n "$INTLTOOL_PERL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_PERL" >&5 $as_echo "$INTLTOOL_PERL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$INTLTOOL_PERL"; then as_fn_error $? "perl not found" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for perl >= 5.8.1" >&5 $as_echo_n "checking for perl >= 5.8.1... " >&6; } $INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 if test $? -ne 0; then as_fn_error $? "perl 5.8.1 is required for intltool" "$LINENO" 5 else IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"` { $as_echo "$as_me:${as_lineno-$LINENO}: result: $IT_PERL_VERSION" >&5 $as_echo "$IT_PERL_VERSION" >&6; } fi if test "x" != "xno-xml"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML::Parser" >&5 $as_echo_n "checking for XML::Parser... " >&6; } if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 $as_echo "ok" >&6; } else as_fn_error $? "XML::Parser perl module is required for intltool" "$LINENO" 5 fi fi # Substitute ALL_LINGUAS so we can use it in po/Makefile # Set DATADIRNAME correctly if it is not set yet # (copied from glib-gettext.m4) if test -z "$DATADIRNAME"; then cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : DATADIRNAME=share else case $host in *-*-solaris*) ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" if test "x$ac_cv_func_bind_textdomain_codeset" = xyes; then : DATADIRNAME=share else DATADIRNAME=lib fi ;; *) DATADIRNAME=lib ;; esac fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi # Check whether --enable-gtk3 was given. if test "${enable_gtk3+set}" = set; then : enableval=$enable_gtk3; case "${enableval}" in yes) enable_gtk3=yes ;; no) enable_gtk3=no ;; *) as_fn_error $? "bad value \"${enableval}\" for --enable-gtk3, use \"yes\" (default) or \"no\"." "$LINENO" 5 ;; esac fi if test "x$enable_gtk3" = "xyes" ; then CFLAGS="$CFLAGS -DENABLE_GTK3" gtk_modules="gtk+-3.0 >= 3.0.0" else gtk_modules="gtk+-2.0 >= 2.12.0" fi if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_PKG_CONFIG+:} false; then : $as_echo_n "(cached) " >&6 else case $PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi PKG_CONFIG=$ac_cv_path_PKG_CONFIG if test -n "$PKG_CONFIG"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 $as_echo "$PKG_CONFIG" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_PKG_CONFIG"; then ac_pt_PKG_CONFIG=$PKG_CONFIG # Extract the first word of "pkg-config", so it can be a program name with args. set dummy pkg-config; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : $as_echo_n "(cached) " >&6 else case $ac_pt_PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG if test -n "$ac_pt_PKG_CONFIG"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 $as_echo "$ac_pt_PKG_CONFIG" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_PKG_CONFIG" = x; then PKG_CONFIG="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac PKG_CONFIG=$ac_pt_PKG_CONFIG fi else PKG_CONFIG="$ac_cv_path_PKG_CONFIG" fi fi if test -n "$PKG_CONFIG"; then _pkg_min_version=0.9.0 { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 $as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } PKG_CONFIG="" fi fi pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTK" >&5 $as_echo_n "checking for GTK... " >&6; } if test -n "$GTK_CFLAGS"; then pkg_cv_GTK_CFLAGS="$GTK_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$gtk_modules\""; } >&5 ($PKG_CONFIG --exists --print-errors "$gtk_modules") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GTK_CFLAGS=`$PKG_CONFIG --cflags "$gtk_modules" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$GTK_LIBS"; then pkg_cv_GTK_LIBS="$GTK_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$gtk_modules\""; } >&5 ($PKG_CONFIG --exists --print-errors "$gtk_modules") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GTK_LIBS=`$PKG_CONFIG --libs "$gtk_modules" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then GTK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$gtk_modules" 2>&1` else GTK_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$gtk_modules" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$GTK_PKG_ERRORS" >&5 as_fn_error $? "Package requirements ($gtk_modules) were not met: $GTK_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables GTK_CFLAGS and GTK_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables GTK_CFLAGS and GTK_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details" "$LINENO" 5; } else GTK_CFLAGS=$pkg_cv_GTK_CFLAGS GTK_LIBS=$pkg_cv_GTK_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi pkg_modules="x11" pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for X11" >&5 $as_echo_n "checking for X11... " >&6; } if test -n "$X11_CFLAGS"; then pkg_cv_X11_CFLAGS="$X11_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$pkg_modules\""; } >&5 ($PKG_CONFIG --exists --print-errors "$pkg_modules") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_X11_CFLAGS=`$PKG_CONFIG --cflags "$pkg_modules" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$X11_LIBS"; then pkg_cv_X11_LIBS="$X11_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$pkg_modules\""; } >&5 ($PKG_CONFIG --exists --print-errors "$pkg_modules") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_X11_LIBS=`$PKG_CONFIG --libs "$pkg_modules" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then X11_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$pkg_modules" 2>&1` else X11_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$pkg_modules" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$X11_PKG_ERRORS" >&5 as_fn_error $? "Package requirements ($pkg_modules) were not met: $X11_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables X11_CFLAGS and X11_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables X11_CFLAGS and X11_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details" "$LINENO" 5; } else X11_CFLAGS=$pkg_cv_X11_CFLAGS X11_LIBS=$pkg_cv_X11_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for jpeg_start_decompress in -ljpeg" >&5 $as_echo_n "checking for jpeg_start_decompress in -ljpeg... " >&6; } if ${ac_cv_lib_jpeg_jpeg_start_decompress+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ljpeg -lm $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char jpeg_start_decompress (); int main () { return jpeg_start_decompress (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_jpeg_jpeg_start_decompress=yes else ac_cv_lib_jpeg_jpeg_start_decompress=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_jpeg_jpeg_start_decompress" >&5 $as_echo "$ac_cv_lib_jpeg_jpeg_start_decompress" >&6; } if test "x$ac_cv_lib_jpeg_jpeg_start_decompress" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LIBJPEG 1 _ACEOF LIBS="-ljpeg $LIBS" else as_fn_error $? "libjpeg not found" "$LINENO" 5 fi ac_fn_c_check_header_mongrel "$LINENO" "jpeglib.h" "ac_cv_header_jpeglib_h" "$ac_includes_default" if test "x$ac_cv_header_jpeglib_h" = xyes; then : else as_fn_error $? "libjpeg not found" "$LINENO" 5 fi LIBJPEG='-ljpeg' GETTEXT_PACKAGE=gpicview cat >>confdefs.h <<_ACEOF #define GETTEXT_PACKAGE "$GETTEXT_PACKAGE" _ACEOF ac_config_files="$ac_config_files Makefile src/Makefile data/Makefile po/Makefile.in" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then if test "x$cache_file" != "x/dev/null"; then { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} if test ! -f "$cache_file" || test -h "$cache_file"; then cat confcache >"$cache_file" else case $cache_file in #( */* | ?:*) mv -f confcache "$cache_file"$$ && mv -f "$cache_file"$$ "$cache_file" ;; #( *) mv -f confcache "$cache_file" ;; esac fi fi else { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs { $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 $as_echo_n "checking that generated files are newer than configure... " >&6; } if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 $as_echo "done" >&6; } if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' else am__EXEEXT_TRUE='#' am__EXEEXT_FALSE= fi if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then as_fn_error $? "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi ac_config_commands="$ac_config_commands po/stamp-it" : "${CONFIG_STATUS=./config.status}" ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by gpicview $as_me 0.2.4, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to the package provider." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ gpicview config.status 0.2.4 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; --*=) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg= ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header as_fn_error $? "ambiguous option: \`$1' Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } # Quote evaled strings. for var in SHELL \ ECHO \ PATH_SEPARATOR \ SED \ GREP \ EGREP \ FGREP \ LD \ NM \ LN_S \ lt_SP2NL \ lt_NL2SP \ reload_flag \ OBJDUMP \ deplibs_check_method \ file_magic_cmd \ file_magic_glob \ want_nocaseglob \ DLLTOOL \ sharedlib_from_linklib_cmd \ AR \ AR_FLAGS \ archiver_list_spec \ STRIP \ RANLIB \ CC \ CFLAGS \ compiler \ lt_cv_sys_global_symbol_pipe \ lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ nm_file_list_spec \ lt_prog_compiler_no_builtin_flag \ lt_prog_compiler_pic \ lt_prog_compiler_wl \ lt_prog_compiler_static \ lt_cv_prog_compiler_c_o \ need_locks \ MANIFEST_TOOL \ DSYMUTIL \ NMEDIT \ LIPO \ OTOOL \ OTOOL64 \ shrext_cmds \ export_dynamic_flag_spec \ whole_archive_flag_spec \ compiler_needs_object \ with_gnu_ld \ allow_undefined_flag \ no_undefined_flag \ hardcode_libdir_flag_spec \ hardcode_libdir_separator \ exclude_expsyms \ include_expsyms \ file_list_spec \ variables_saved_for_relink \ libname_spec \ library_names_spec \ soname_spec \ install_override_mode \ finish_eval \ old_striplib \ striplib; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in reload_cmds \ old_postinstall_cmds \ old_postuninstall_cmds \ old_archive_cmds \ extract_expsyms_cmds \ old_archive_from_new_cmds \ old_archive_from_expsyms_cmds \ archive_cmds \ archive_expsym_cmds \ module_cmds \ module_expsym_cmds \ export_symbols_cmds \ prelink_cmds \ postlink_cmds \ postinstall_cmds \ postuninstall_cmds \ finish_cmds \ sys_lib_search_path_spec \ sys_lib_dlsearch_path_spec; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done ac_aux_dir='$ac_aux_dir' xsi_shell='$xsi_shell' lt_shell_append='$lt_shell_append' # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi PACKAGE='$PACKAGE' VERSION='$VERSION' TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile' _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "data/Makefile") CONFIG_FILES="$CONFIG_FILES data/Makefile" ;; "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= ac_tmp= trap 'exit_status=$? : "${ac_tmp:=$tmp}" { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove sole $(srcdir), # ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ h s/// s/^/:/ s/[ ]*$/:/ s/:\$(srcdir):/:/g s/:\${srcdir}:/:/g s/:@srcdir@:/:/g s/^:*// s/:*$// x s/\(=[ ]*\).*/\1/ G s/\n// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$ac_tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_tt=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_tt"; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$ac_tmp/stdin" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ "$ac_tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$ac_tmp/stdin" case $ac_file in -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" } >"$ac_tmp/config.h" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$ac_tmp/config.h" "$ac_file" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ || as_fn_error $? "could not create -" "$LINENO" 5 fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir=$dirpart/$fdir; as_fn_mkdir_p # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ;; "libtool":C) # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi cfgfile="${ofile}T" trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008, 2009, 2010, 2011 Free Software # Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. # # GNU Libtool is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, or # obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # The names of the tagged configurations supported by this script. available_tags="" # ### BEGIN LIBTOOL CONFIG # Which release of libtool.m4 was used? macro_version=$macro_version macro_revision=$macro_revision # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # What type of objects to build. pic_mode=$pic_mode # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # An echo program that protects backslashes. ECHO=$lt_ECHO # The PATH separator for the build system. PATH_SEPARATOR=$lt_PATH_SEPARATOR # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="\$SED -e 1s/^X//" # A grep program that handles long lines. GREP=$lt_GREP # An ERE matcher. EGREP=$lt_EGREP # A literal string matcher. FGREP=$lt_FGREP # A BSD- or MS-compatible name lister. NM=$lt_NM # Whether we need soft or hard links. LN_S=$lt_LN_S # What is the maximum length of a command? max_cmd_len=$max_cmd_len # Object file suffix (normally "o"). objext=$ac_objext # Executable file suffix (normally ""). exeext=$exeext # whether the shell understands "unset". lt_unset=$lt_unset # turn spaces into newlines. SP2NL=$lt_lt_SP2NL # turn newlines into spaces. NL2SP=$lt_lt_NL2SP # convert \$build file names to \$host format. to_host_file_cmd=$lt_cv_to_host_file_cmd # convert \$build files to toolchain format. to_tool_file_cmd=$lt_cv_to_tool_file_cmd # An object symbol dumper. OBJDUMP=$lt_OBJDUMP # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method = "file_magic". file_magic_cmd=$lt_file_magic_cmd # How to find potential files when deplibs_check_method = "file_magic". file_magic_glob=$lt_file_magic_glob # Find potential files using nocaseglob when deplibs_check_method = "file_magic". want_nocaseglob=$lt_want_nocaseglob # DLL creation program. DLLTOOL=$lt_DLLTOOL # Command to associate shared and link libraries. sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd # The archiver. AR=$lt_AR # Flags to create an archive. AR_FLAGS=$lt_AR_FLAGS # How to feed a file listing to the archiver. archiver_list_spec=$lt_archiver_list_spec # A symbol stripping program. STRIP=$lt_STRIP # Commands used to install an old-style archive. RANLIB=$lt_RANLIB old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Whether to use a lock for old archive extraction. lock_old_archive_extraction=$lock_old_archive_extraction # A C compiler. LTCC=$lt_CC # LTCC compiler flags. LTCFLAGS=$lt_CFLAGS # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration. global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair. global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # Transform the output of nm in a C name address pair when lib prefix is needed. global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix # Specify filename containing input files for \$NM. nm_file_list_spec=$lt_nm_file_list_spec # The root where to search for dependent libraries,and in which our libraries should be installed. lt_sysroot=$lt_sysroot # The name of the directory that contains temporary libtool files. objdir=$objdir # Used to examine libraries when file_magic_cmd begins with "file". MAGIC_CMD=$MAGIC_CMD # Must we lock files when doing compilation? need_locks=$lt_need_locks # Manifest tool. MANIFEST_TOOL=$lt_MANIFEST_TOOL # Tool to manipulate archived DWARF debug symbol files on Mac OS X. DSYMUTIL=$lt_DSYMUTIL # Tool to change global to local symbols on Mac OS X. NMEDIT=$lt_NMEDIT # Tool to manipulate fat objects and archives on Mac OS X. LIPO=$lt_LIPO # ldd/readelf like tool for Mach-O binaries on Mac OS X. OTOOL=$lt_OTOOL # ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. OTOOL64=$lt_OTOOL64 # Old archive suffix (normally "a"). libext=$libext # Shared library suffix (normally ".so"). shrext_cmds=$lt_shrext_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Variables whose values should be saved in libtool wrapper scripts and # restored at link time. variables_saved_for_relink=$lt_variables_saved_for_relink # Do we need the "lib" prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Library versioning type. version_type=$version_type # Shared library runtime path variable. runpath_var=$runpath_var # Shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Permission mode override for installation of shared libraries. install_override_mode=$lt_install_override_mode # Command to use after installation of a shared archive. postinstall_cmds=$lt_postinstall_cmds # Command to use after uninstallation of a shared archive. postuninstall_cmds=$lt_postuninstall_cmds # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # As "finish_cmds", except a single script fragment to be evaled but # not shown. finish_eval=$lt_finish_eval # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Compile-time system search path for libraries. sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries. sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # The linker used to build libraries. LD=$lt_LD # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds # A language specific compiler. CC=$lt_compiler # Is the compiler the GNU compiler? with_gcc=$GCC # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc # Whether or not to disallow shared libs when runtime libs are static. allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Whether the compiler copes with passing no objects directly. compiler_needs_object=$lt_compiler_needs_object # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds # Commands used to build a loadable module if different from building # a shared archive. module_cmds=$lt_module_cmds module_expsym_cmds=$lt_module_expsym_cmds # Whether we are building with GNU ld or not. with_gnu_ld=$lt_with_gnu_ld # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that enforces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary and the resulting library dependency is # "absolute",i.e impossible to change by setting \${shlibpath_var} if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute # Set to "yes" if using the -LDIR flag during linking hardcodes DIR # into the resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR # into the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Set to "yes" if building a shared library automatically hardcodes DIR # into the library and all subsequent libraries and executables linked # against it. hardcode_automatic=$hardcode_automatic # Set to yes if linker adds runtime paths of dependent libraries # to runtime path list. inherit_rpath=$inherit_rpath # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds # Commands necessary for finishing linking programs. postlink_cmds=$lt_postlink_cmds # Specify filename containing input files. file_list_spec=$lt_file_list_spec # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # ### END LIBTOOL CONFIG _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac ltmain="$ac_aux_dir/ltmain.sh" # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) if test x"$xsi_shell" = xyes; then sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ func_dirname ()\ {\ \ case ${1} in\ \ */*) func_dirname_result="${1%/*}${2}" ;;\ \ * ) func_dirname_result="${3}" ;;\ \ esac\ } # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_basename ()$/,/^} # func_basename /c\ func_basename ()\ {\ \ func_basename_result="${1##*/}"\ } # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ func_dirname_and_basename ()\ {\ \ case ${1} in\ \ */*) func_dirname_result="${1%/*}${2}" ;;\ \ * ) func_dirname_result="${3}" ;;\ \ esac\ \ func_basename_result="${1##*/}"\ } # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ func_stripname ()\ {\ \ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ \ # positional parameters, so assign one to ordinary parameter first.\ \ func_stripname_result=${3}\ \ func_stripname_result=${func_stripname_result#"${1}"}\ \ func_stripname_result=${func_stripname_result%"${2}"}\ } # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ func_split_long_opt ()\ {\ \ func_split_long_opt_name=${1%%=*}\ \ func_split_long_opt_arg=${1#*=}\ } # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ func_split_short_opt ()\ {\ \ func_split_short_opt_arg=${1#??}\ \ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ } # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ func_lo2o ()\ {\ \ case ${1} in\ \ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ \ *) func_lo2o_result=${1} ;;\ \ esac\ } # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_xform ()$/,/^} # func_xform /c\ func_xform ()\ {\ func_xform_result=${1%.*}.lo\ } # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_arith ()$/,/^} # func_arith /c\ func_arith ()\ {\ func_arith_result=$(( $* ))\ } # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_len ()$/,/^} # func_len /c\ func_len ()\ {\ func_len_result=${#1}\ } # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$lt_shell_append" = xyes; then sed -e '/^func_append ()$/,/^} # func_append /c\ func_append ()\ {\ eval "${1}+=\\${2}"\ } # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ func_append_quoted ()\ {\ \ func_quote_for_eval "${2}"\ \ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ } # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: # Save a `func_append' function call where possible by direct use of '+=' sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: else # Save a `func_append' function call even when '+=' is not available sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ && mv -f "$cfgfile.tmp" "$cfgfile" \ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") test 0 -eq $? || _lt_function_replace_fail=: fi if test x"$_lt_function_replace_fail" = x":"; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 $as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} fi mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ;; "default-1":C) case "$CONFIG_FILES" in *po/Makefile.in*) sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile esac ;; "po/stamp-it":C) if ! grep "^# INTLTOOL_MAKEFILE$" "po/Makefile.in" > /dev/null ; then as_fn_error $? "po/Makefile.in.in was not created by intltoolize." "$LINENO" 5 fi rm -f "po/stamp-it" "po/stamp-it.tmp" "po/POTFILES" "po/Makefile.tmp" >"po/stamp-it.tmp" sed '/^#/d s/^[[].*] *// /^[ ]*$/d '"s|^| $ac_top_srcdir/|" \ "$srcdir/po/POTFILES.in" | sed '$!s/$/ \\/' >"po/POTFILES" sed '/^POTFILES =/,/[^\\]$/ { /^POTFILES =/!d r po/POTFILES } ' "po/Makefile.in" >"po/Makefile" rm -f "po/Makefile.tmp" mv "po/stamp-it.tmp" "po/stamp-it" ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi echo echo GPicView....................... : Version $VERSION echo echo Prefix..........................: $prefix echo echo The binary will be installed in $prefix/bin echo echo http://lxde.org/ echo gpicview-0.2.4/ChangeLog0000644000000000000000000000046012231705732011775 000000000000002009-04-05 Juergen Hoetzel * src/main-win.c (on_key_press_event): Fix #2613481 (Proper next/previous switching in RTL locales (Khaled Hosny)) 2009-03-03 Juergen Hoetzel * src/main-win.c: rename instead of copy rotated tmpfile and handle errors