debian/0000755000000000000000000000000011430536320007163 5ustar debian/source/0000755000000000000000000000000011430536250010465 5ustar debian/source/format0000644000000000000000000000001411430536250011673 0ustar 3.0 (quilt) debian/changelog0000644000000000000000000002617511430536320011050 0ustar ifhp (3.5.20-12.1ubuntu1) maverick; urgency=low * Merge from debian unstable(LP: #612209). Remaining changes: o Split out ubuntu changes to patches due to new quilt format:- - 60-fix_memset_arguments.patch: + Fix transposed arguments to memset, which caused a build failure. - 61-replace_plain_write.patch: + Use Write_fd_str/Write_fd_len rather than plain write when writing the status file. -- Bhavani Shankar Sun, 01 Aug 2010 12:54:58 +0530 ifhp (3.5.20-12.1) unstable; urgency=low [Jari Aalto] * Non-maintainer upload. - Move to packaging format "3.0 (quilt)" * debian/changelog - Delete EOL whitespaces * debian/compat - Update to 7. * debian/control - (Build-Depends): update obsolete gs to ghostscript. (important; Closes: #539663). Update to debhelper 7.1. - (Homepage): Update to Freshmeat. - (Maintainer): Set to QA Group. - (Standards-Version): Update to 3.8.4. * debian/copyright - Fix lintian copyright-without-copyright-notice. * debian/doc-base - (Section): Update obsolete Printing to Office. * debian/patches - (Number 10): New. Fix syntax error; missing quote. - (Number 30): New. Pull out all Debian changes so far and Fix hp1100 part of configuration file. Patch thanks to Holger Klawitter . (Closes: #492685). * debian/{postinst,config} - Fix Lintian maintainer-script-ignores-errors. * debian/rules - (install): Update dh_clean to dh_prep. * debian/source/format - New file. -- Jari Aalto Mon, 17 May 2010 07:08:39 +0300 ifhp (3.5.20-12ubuntu1) lucid; urgency=low * Fix transposed arguments to memset, which caused a build failure. * Use Write_fd_str/Write_fd_len rather than plain write when writing the status file. -- Colin Watson Wed, 14 Apr 2010 15:49:19 +0100 ifhp (3.5.20-12) unstable; urgency=low * debian/changelog (3.5.20-11): Wrap over-long line. -- Thomas Bushnell, BSG Mon, 21 Jan 2008 14:56:31 -0500 ifhp (3.5.20-11) unstable; urgency=low * debian/rules (clean): Don't ignore all errors on recursive make invocation. * debian/control (Standards-Version): Update to 3.7.3. (No changes needed.) * debian/ifhp.lintian-overrides: New file. Don't pay attention to no-debconf-templates. Our debian/config file manages an upgrade issue but does not actually prompt the user. * debian/rules (install): And install it as /usr/share/lintian/overrides/ifhp. * debian/rules (install): Remove (empty) usr/bin directory. -- Thomas Bushnell, BSG Wed, 16 Jan 2008 16:00:48 -0500 ifhp (3.5.20-10) unstable; urgency=low * debian/po: Remove directory and all contents. (Closes: #407219) -- Thomas Bushnell, BSG Tue, 6 Feb 2007 11:41:09 -0800 ifhp (3.5.20-9) unstable; urgency=low * debian/control (Standards-Version): Update to 3.7.2. * debian/compat: Update to 5. * debian/templates: Remove file (only contained an inappropriate note). -- Thomas Bushnell, BSG Sun, 8 Oct 2006 18:05:49 -0700 ifhp (3.5.20-8) unstable; urgency=high * debian/rules (install): Use $(CURDIR) instead of $(PWD) because some archs refuse to set proper environment variables. Thanks to Niko Tyni for the fix. (Closes: #390383) -- Thomas Bushnell, BSG Sun, 1 Oct 2006 20:07:50 -0700 ifhp (3.5.20-7) unstable; urgency=low * src/plp_snprintf.c (fmtquad, fmtdouble): Don't use safestrlen for a known-safe constant value, to avoid GCC 4.2 warning that FTBFS with -Werror. (Closes: #361576) -- Thomas Bushnell, BSG Mon, 11 Sep 2006 22:25:22 -0700 ifhp (3.5.20-6) unstable; urgency=low * debian/copyright: Don't include old maintainer's name as the current one. * debian/rules (configure): Specify correct Debian value for DEVFD, that is, /proc/self/fd/3. (Closes: #222176) * debian/docs: Include pdf and html documentation. * debian/doc-base: New file. Patch from Andrey Mitrofanov . (Closes: #330499) * debian/README.Debian: Correct name of ifhp documentation file. Patch from Andrey Mitrofanov . * ifhp.conf.in (hp6l hp1100): Specify better options. Patch from Brendan O'Dea . (Closes: #236567) * ifhp.conf.in (gs_ljet4): Don't comment out pcl_gs converter spec. (Closes: #257485) * src/ifhp.c (Send_job): When setting language from Use_file_util(), correctly test to see whether Use_file_util succeeded. (Closes: #361576) * po/cs.po: New file, thanks to Martin \u0160ín (Closes: #315206) * po/sv.po: New file, thanks to Daniel Nylander . (Closes: #331524) -- Thomas Bushnell, BSG Sun, 28 May 2006 22:05:22 -0700 ifhp (3.5.20-5) unstable; urgency=low * debian/control: Use ${misc:Depends} in place of explicit dependency on debconf. (Closes: #331852) -- Thomas Bushnell, BSG Wed, 5 Oct 2005 00:06:41 -0700 ifhp (3.5.20-4) unstable; urgency=low * debian/control (Maintainer): Actually set myself as maintainer. Really (Closes: #323471) -- Thomas Bushnell, BSG Wed, 21 Sep 2005 13:50:12 -0700 ifhp (3.5.20-3) unstable; urgency=low * Adopt package. (Closes: #323471) * Thanks for all your work, Jens. -- Thomas Bushnell, BSG Fri, 2 Sep 2005 15:31:39 -0700 ifhp (3.5.20-2) unstable; urgency=low * Removed obsolete doc-base entry (closes: Bug#308982). * Added the Vietnamese translation by Clytie Siddall (closes: Bug#311921). -- Jens Schmalzing Sun, 12 Jun 2005 21:12:30 +0200 ifhp (3.5.20-1) unstable; urgency=low * New maintainer (closes: Bug#266467). * New upstream release. * Added build-time dependencies and suggestions for new features, namely foomatic filter support and printer status queries via SNMP. * Removed unnecessary build-time dependencies. * Took care of warnings and errors reported by lintian. * Added a small patch fixing the pjl_waitend_byjobname option. -- Jens Schmalzing Tue, 26 Apr 2005 17:51:01 +0200 ifhp (3.5.10-3) unstable; urgency=low * QA upload * set maintainer to Debian QA Group * Debconf updates: + Catalan debconf templates translation. Closes: #236625 + German debconf templates translation. Closes: #263027 + Japanese debconf template translation. Closes: #258780 + Updated danish template translation. Closes: #241251 * Checked against newest policy, updated Strandards-Version (no other changes) * Fix the debian/clean target to really clean up all generated files -- Martin Zobel-Helas Fri, 8 Oct 2004 01:13:24 +0200 ifhp (3.5.10-2.1) unstable; urgency=low * Non-maintainer uploade * Danish debconf templates translation. Closes: #175024 * French debconf templates translation. Closes: #182202 * Brazilian portuguese debconf templates translation. Closes: #179373 -- Christian Perrier Sun, 21 Dec 2003 10:48:22 +0100 ifhp (3.5.10-2) unstable; urgency=low * debian/templates: added -da translation (Closes: Bug#175024) -- Luca Filipozzi Sat, 4 Jan 2003 23:18:40 -0800 ifhp (3.5.10-1) unstable; urgency=low * New upstream release -- Luca Filipozzi Fri, 12 Jul 2002 22:51:51 -0700 ifhp (3.5.8-3) unstable; urgency=low * added build dependencies for gettext, sgml-tools, tetex-bin, tetex-extra, and autotools-dev (Closes: Bug#150311) * added runtime dependency on gs since ifhp uses GhostScript to convert files from their input format (PS, PDF, text, etc.) to PostScript for PostScript printers and PCL for non-PostScript printers -- Luca Filipozzi Thu, 20 Jun 2002 09:38:40 -0700 ifhp (3.5.8-2) unstable; urgency=low * refreshed config.sub and config.guess from /usr/share/misc to fix a fails to build from source bug (Closes: #149508) -- Luca Filipozzi Sun, 9 Jun 2002 20:56:19 -0700 ifhp (3.5.8-1) unstable; urgency=low * New upstream release -- Luca Filipozzi Sun, 2 Jun 2002 20:37:50 -0700 ifhp (3.5.7-2) unstable; urgency=low * debian/watch: updated to uscan version 2 format -- Luca Filipozzi Sat, 13 Apr 2002 15:37:10 -0700 ifhp (3.5.7-1) unstable; urgency=low * New upstream release * New maintainer (closes: Bug#141560) * lexmark4039 sync/async settings corrected (closes: Bug#92176) * bidirectional parallel port support added in 3.5.2 (closes: Bug#27187) * papersize_default option in ifhp.conf added in 3.4.3; would be nice to parse /etc/papersize but not necessary for proper operation of ifhp (closes: Bug#57272, Bug#87857) * (obsolete bug) additional documentation installed (closes: Bug#61748) * (obsolete bug) manpage not installed twice (closes: Bug#58085) * (obsolete bug) filters are installed into /usr/lib/filters; no other packaged currently uses /usr/lib/filters (closes: Bug#57572) * debian/doc-base: .pdf documentation registered, name changed to 'ifhp' * debian/rules: .PHONY directive added, configure target added * debian/control: description and dependencies modified * debian/watch: created (uses version 2 syntax) -- Luca Filipozzi Sat, 6 Apr 2002 20:45:08 -0800 ifhp (3.4.4-1) unstable; urgency=medium * New upstream release (closes: #71868) * Tag /etc/ifhp.conf as conffile (closes: #74472) * Move package development into CVS, hopefully closing the updating nightmare. * Repackage it from scratch since the build system changed a lot and fiddling with the existing scripts just does not work. * The upstream source does not build the info files anymore so documentation is only included as HTML now. * debian/control: Add Build-Depends and update to policy 3.2.1. * debian/control: Add Depends for a2ps and file since it expects to find those utils if they are installed at build time. Also added a suggestion for gs since you need it for some printers. * The stuff from the UTILS directory is no longer installed. Since I don't know what they are needed for I let it this way. If you need psbanner.ps, accounting.sh or banner please tell me. I guess I should install them as example at least... The ofhp link to ifhp is also gone so you might need to update your printcap a bit. * Register the HOWTO using doc-base. * debian/TODO: Created a TODO list. -- Torsten Landschoff Wed, 10 Jan 2001 15:49:30 +0100 ifhp (3.3.10-3) unstable; urgency=low * Changed priority to "extra" since lprng is at that priority. Thanks to Darren O. Benham for telling me. -- Torsten Landschoff Sun, 5 Dec 1999 10:45:27 +0100 ifhp (3.3.10-2) unstable; urgency=low * Fixed parameters to install-info in postinst (closes: #50493). -- Torsten Landschoff Thu, 18 Nov 1999 11:16:42 +0100 ifhp (3.3.10-1) unstable; urgency=low * Initial release. -- Torsten Landschoff Tue, 16 Nov 1999 13:04:27 +0100 debian/examples0000644000000000000000000000002011430536250010716 0ustar ifhp.conf UTILS debian/control0000644000000000000000000000201611430536320010565 0ustar Source: ifhp Maintainer: Ubuntu Developers XSBC-Original-Maintainer: Thomas Bushnell, BSG Section: net Priority: extra Standards-Version: 3.8.4 Build-Depends: debhelper (>= 7.1), file, a2ps, ghostscript, gettext, autotools-dev, po-debconf, libnet-snmp-perl, foomatic-filters Package: ifhp Architecture: any Depends: file, a2ps, ghostscript, ${misc:Depends}, ${shlibs:Depends}, ${perl:Depends} Recommends: lpr Suggests: libnet-snmp-perl, foomatic-filters Description: Printer filter for HP LaserJet printers ifhp is a highly versatile print filter for BSD based print spoolers. It can be configured to handle text, PostScript, PJL, PCL, and raster printers, supports conversion from one format to another, and can be used as a stand-alone print utility. It is the primary supported print filter for the LPRng print spooler. . It provides access to printer features like duplex printing, paper tray selection and strong accounting using the printer's internal page counter. debian/doc-base0000644000000000000000000000075411430536250010573 0ustar Document: ifhp Title: ifhp Reference Author: Patrick Powell Abstract: The IFHP program is an enhanced, extended, highly configurable, and portable implementation of a print filter for use with the LPRng Print spooler package. This document describes the installation and configuration of this software. Section: Office Format: HTML Index: /usr/share/doc/ifhp/IFHP-Reference.html Files: /usr/share/doc/ifhp/IFHP-Reference.html Format: PDF Files: /usr/share/doc/ifhp/IFHP-Reference.pdf.gz debian/postinst0000755000000000000000000000015511430536250010777 0ustar #!/bin/sh set -e # the "HACK" as suggested by debconf-devel.8 . /usr/share/debconf/confmodule #DEBHELPER# debian/copyright0000644000000000000000000000211011430536250011112 0ustar This package was downloaded from: By by Torsten Landschoff from sources obtained from ftp://ftp.astart.com/pub/LPRng/FILTERS/ifhp-latest.tgz Copyright: Copyright (C) 1998-2004 Patrick Powell, Astart Technologies . A printer filter for HP LaserJet and compatible printers. ifhp was written by Patrick Powell with ideas from cti-ifhp which was written by Panos Dimakopoulos and later maintained by Patrick. License: You may use IFHP under either the terms of the Artistic License or the GNU GPL (General Public License). On Debian/GNU systems you can find the full text of those license in /usr/share/common-licenses/Artistic. In case you got the source package you will find the license in the file LICENSE of the toplevel directory. The Debian packaging is licensed under the GPL version 2, or (at your option), any later version. On Debian systems, the complete text of the GNU General Public License can be found in "/usr/share/common-licenses/GPL-2". debian/rules0000755000000000000000000000313611430536250010250 0ustar #! /usr/bin/make -f CONFFLAGS=\ --prefix=/usr\ --mandir=/usr/share/man\ --sysconfdir=/etc\ --with-filterdir=/usr/lib/ifhp\ --disable-gscheck ifeq (,$(findstring debug,$(DEB_BUILD_OPTIONS))) CFLAGS+=-g endif ifneq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS))) CONFFLAGS+=--disable-strip endif configure: configure-stamp configure-stamp: dh_testdir cp -pf /usr/share/misc/config.sub /usr/share/misc/config.guess . DEVFD=/proc/self/fd/3 ./configure $(CONFFLAGS) # touch $@ build: build-stamp build-stamp: configure-stamp dh_testdir $(MAKE) LDFLAGS=$(LDFLAGS) touch $@ clean: dh_testdir dh_testroot dh_clean [ ! -f Makefile ] || $(MAKE) distclean rm -f intl/libintl.h rm -f configure-stamp build-stamp install-stamp rm -f gs_out rm -f config.log config.status install: install-stamp install-stamp: build-stamp dh_testdir dh_testroot dh_prep dh_installdirs $(MAKE) DESTDIR=$(CURDIR)/debian/ifhp install # Remove the sample conf file and the UTILS directory (we install them via dh_installexamples) cd $(CURDIR)/debian/ifhp; rm -rf etc/ifhp.conf.sample usr/lib/ifhp/UTILS touch $@ mkdir -p debian/ifhp/usr/share/lintian/overrides cp debian/ifhp.lintian-overrides debian/ifhp/usr/share/lintian/overrides/ifhp rmdir debian/ifhp/usr/bin binary-indep: install binary-arch: install dh_testdir dh_testroot dh_installchangelogs CHANGES dh_installexamples dh_installdocs dh_installdebconf dh_strip dh_compress dh_fixperms dh_installdeb dh_shlibdeps dh_gencontrol dh_md5sums dh_builddeb binary: binary-indep binary-arch .PHONY: configure build clean install binary-indep binary-arch binary debian/watch0000644000000000000000000000013211430536250010212 0ustar version=2 opts=pasv ftp://ftp.lprng.org/pub/LPRng/ifhp/ifhp-([\d\.]*)\.tgz debian uupdate debian/ifhp.lintian-overrides0000644000000000000000000000004211430536250013467 0ustar ifhp binary: no-debconf-templates debian/config0000755000000000000000000000037311430536250010363 0ustar #!/bin/sh set -e action=$1 version=$2 if [ "$action" = "configure" ] ; then if dpkg --compare-versions "$version" le 3.5.7 ; then . /usr/share/debconf/confmodule db_input critical ifhp/filters_have_moved || true db_go || true fi fi debian/README.Debian0000644000000000000000000000073111430536250011227 0ustar This is the Debian-specific README file for the ifhp package. General documentation regarding ifhp can be found in the IFHP-Reference (html or pdf versions) contained in this directory. In terms of Debian-specific changes, there is only one of interest: (1) The location of the filters has been changed from /usr/lib/filters (all versions prior to 3.5.7) to /usr/lib/ifhp (all versions from 3.5.7 onwards ) so as to comply with Debian policy (FHS-2.2 sec 4.7). debian/docs0000644000000000000000000000015111430536250010035 0ustar README DOCS/IFHP-Reference.pdf DOCS/IFHP-Reference.html DOCS/ifhp-S.jpg DOCS/LPRng.jpg DOCS/LPRngT-L.jpg debian/patches/0000755000000000000000000000000011430536320010612 5ustar debian/patches/50-configure.in.patch0000644000000000000000000000146311430536250014451 0ustar From e878f31478e07d8cba275e12d7947a7e3c475ca0 Mon Sep 17 00:00:00 2001 From: Jari Aalto Date: Sat, 8 May 2010 17:21:48 +0300 Subject: [PATCH] configure.in: Add AC_CONFIG_MACRO_DIR([m4]) Organization: Private Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Signed-off-by: Jari Aalto --- configure.in | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/configure.in b/configure.in index 01d57a6..8736900 100644 --- a/configure.in +++ b/configure.in @@ -6,6 +6,8 @@ dnl ---------------------------------------------------------------------------- dnl ----------------- START OF GENERAL CONFIGURATION --------------------------- AC_INIT(Makefile.in) +AC_CONFIG_MACRO_DIR([m4]) + PACKAGE=ifhp VERSION=3.5.20 -- 1.7.0 debian/patches/series0000644000000000000000000000033211430536320012025 0ustar 10-UTILS--accounting.sh.in.patch 20-manpage.patch 30-ifhp.conf.in.patch 50-configure.in.patch 51-libtoolize-2.2.6b--ltmain.sh.patch debian-changes-3.5.20-12.1 60-fix_memset_arguments.patch 61-replace_plain_write.patch debian/patches/10-UTILS--accounting.sh.in.patch0000644000000000000000000000177711430536250016212 0ustar From 3bb271419ddd26baf840aa2a62cf639b5ab0e176 Mon Sep 17 00:00:00 2001 From: Jari Aalto Date: Sat, 8 May 2010 14:21:20 +0300 Subject: [PATCH] UTILS/accounting.sh.in: Add missing quote Organization: Private Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Signed-off-by: Jari Aalto --- UTILS/accounting.sh.in | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) mode change 100644 => 100755 UTILS/accounting.sh.in diff --git a/UTILS/accounting.sh.in b/UTILS/accounting.sh.in old mode 100644 new mode 100755 index 2984a6f..a374679 --- a/UTILS/accounting.sh.in +++ b/UTILS/accounting.sh.in @@ -47,7 +47,7 @@ do case "$1" in -P* ) printer=`echo "$1" | sed s/..//` ;; -p* ) pagecounter=`echo "$1" | sed s/..//` ;; -F* ) format=`echo "$1" | sed s/..//` ;; - -Z* ) zoption=`echo "$1" | sed s/..//'`;; + -Z* ) zoption=`echo "$1" | sed 's/..//'`;; -T* ) time=`echo "$1" | sed 's/..//'` ;; -* ) ;; * ) accountingfile=$1;; -- 1.7.0 debian/patches/30-ifhp.conf.in.patch0000644000000000000000000000174711430536250014345 0ustar From d116a578cb69d09ab224d3c5f59df5981e16e176 Mon Sep 17 00:00:00 2001 From: Jari Aalto Date: Mon, 17 May 2010 07:07:00 +0300 Subject: [PATCH] ifhp.conf.in: Debian changes Organization: Private Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Signed-off-by: Jari Aalto --- ifhp.conf.in | 6 +++++- 1 files changed, 5 insertions(+), 1 deletions(-) diff --git a/ifhp.conf.in b/ifhp.conf.in index c73864d..5a0e1ea 100644 --- a/ifhp.conf.in +++ b/ifhp.conf.in @@ -2066,6 +2066,10 @@ pjl_except=[ # PRINTER % - HP LaserJet 6 Family, Hp LaserJet {/hp(.*)/$1/} [ hp6l hp1100 ] +tc=hp4l +status +pjl +gs_options=-r600x600 pjl_except=[ EOJ JOB OPMSG RDYMSG STMSG FSAPPEND FSDIRLIST FSQUERY FSUPLOAD FSDELETE FSDOWNLOAD FSINIT FSMKDIR @@ -5319,7 +5323,7 @@ gs_options= # PRINTER gs_ljet4 - Oki OL410ex LED printer 300dpi or 600dpi [ gs_ljet4 ] -# tc=pcl_gs +tc=pcl_gs gs_device=ljet4 gs_options= -- 1.7.0 debian/patches/60-fix_memset_arguments.patch0000644000000000000000000000075111430536320016306 0ustar Author: Colin Watson Bug-Debian: http://bugs.debian.org/592230 Description: Patch to fix transposed arguments to memset, which caused a build failure. --- ifhp-3.5.20.orig/src/ifhp.c +++ ifhp-3.5.20/src/ifhp.c @@ -672,7 +672,7 @@ void getargs( int argc, char **argv ) } DEBUG1("getargs: finished options"); /* set the Topts and Zopts values */ - memset(m,sizeof(m),0); + memset(m,0,sizeof(m)); m[0] = m[1] = 0; for( i = 'a'; i <= 'z'; ++i ){ m[0] = i; debian/patches/20-manpage.patch0000644000000000000000000000736511430536250013477 0ustar From b0a7b32728cd90e280ac94bc21e4705ed1852f88 Mon Sep 17 00:00:00 2001 From: Jari Aalto Date: Sat, 8 May 2010 14:32:26 +0300 Subject: [PATCH] man/*: Fix hyphens Organization: Private Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Signed-off-by: Jari Aalto --- man/ifhp.n | 26 +++++++++++++------------- man/textps.n | 4 ++-- 2 files changed, 15 insertions(+), 15 deletions(-) diff --git a/man/ifhp.n b/man/ifhp.n index 073a326..40ea86d 100644 --- a/man/ifhp.n +++ b/man/ifhp.n @@ -6,14 +6,14 @@ ifhp \- Almost Universal LPRng Print Filter .SH SYNOPSIS .B ifhp .br -[-F format] -[-s statusfile] -[-?value (other LPRng filter options)] +[\-F format] +[\-s statusfile] +[\-?value (other LPRng filter options)] .br .br -[-Z[options[,options]*]* +[\-Z[options[,options]*]* .br -[-T[options[,options]*]* +[\-T[options[,options]*]* .br [accountingfile] .br @@ -207,7 +207,7 @@ and suppress it using .LP The IFHP filter will puts tracing and status information in the file specified by the -.B -s +.B \-s command line flag. If the status file does not exist, it will not be created. The diagnostic @@ -217,14 +217,14 @@ flag overrides this and directs the status to STDERR. The pagecount information is put into the accounting file specified on the command line. If the accounting file does not exist, it will not be created. -.SH "JOB PROCESSING (LPR -Z) OPTIONS" +.SH "JOB PROCESSING (LPR \-Z) OPTIONS" .LP The .B lpr -program passes the command line -Z options +program passes the command line \-Z options or the .B lp -program -o options +program \-o options to the LPRng .B lpd server @@ -236,7 +236,7 @@ For example if duplex printing and landscape is wanted, then .sp .5v .LP Since each printer has a different set of capabilities -there are no standard set of -Z options. +there are no standard set of \-Z options. The following is a sample of the options provided by .BR ifhp . @@ -258,7 +258,7 @@ here as there may be an envelope feeder as well as an envelope media. This is a printer specific dependency. .br The source=name option allows users to use options such as --Zsource=inbin1, which may be useful for systems that have +\-Zsource=inbin1, which may be useful for systems that have an unusual or nonstandard input selection mechanism. se select media (paper) from the specified tray or feeder. .TP @@ -271,7 +271,7 @@ outbin=name The output bin selection should start with the out prefix. .br The outbin=name form allow users to use options such as --Zoutbin=stapler, which may be useful for systems that have +\-Zoutbin=stapler, which may be useful for systems that have an unusual or nonstandard output selection mechanism. .TP .B "Media Size Selection" @@ -289,7 +289,7 @@ dependent, and the input tray selection and paper size selection mechanisms may interact in strange and mysterious ways. .br The paper=name form allow users to use options such as --Zpaper=b3, which may be useful for systems that have an +\-Zpaper=b3, which may be useful for systems that have an unusual or nonstandard input media selection mechanism. .TP .B "Media Type Selection" diff --git a/man/textps.n b/man/textps.n index c5e0b39..6b74779 100644 --- a/man/textps.n +++ b/man/textps.n @@ -110,7 +110,7 @@ The default behaviour is By default, .B nscript will send the formatted output to lpr; -the -P option can select the printer. +the \-P option can select the printer. .TP .B -G Gaudy output - a header and labels for the input files are placed on the output @@ -137,7 +137,7 @@ spool output to using .BR lpr . .LP -Note: the combination nscript -2Gr is useful for viewing listings. +Note: the combination nscript \-2Gr is useful for viewing listings. .LP .SH "AUTHORS" .nf -- 1.7.0 debian/patches/61-replace_plain_write.patch0000644000000000000000000000124311430536320016067 0ustar Author: Colin Watson Bug-Debian: http://bugs.debian.org/592230 Description: Parch to use Write_fd_str/Write_fd_len rather than plain write when writing the status file. --- ifhp-3.5.20.orig/src/errormsg.c +++ ifhp-3.5.20/src/errormsg.c @@ -539,11 +539,11 @@ void setstatus( char *msg, char *details buffer[n] = 0; if( (s = strchr(buffer,'\n')) ){ *s++ = 0; - write(temp_fd, s,strlen(s)); + Write_fd_str(temp_fd, s); } } while( (n = read(Status_fd, buffer,sizeof(buffer)-1)) > 0 ){ - write(temp_fd, buffer,n); + Write_fd_len(temp_fd, buffer,n); } close( Status_fd ); close( temp_fd ); debian/patches/51-libtoolize-2.2.6b--ltmain.sh.patch0000644000000000000000000121207611430536250017022 0ustar From 95025591fdff3fd0b8e69e514ac3712d033ec895 Mon Sep 17 00:00:00 2001 From: Jari Aalto Date: Sat, 8 May 2010 17:23:06 +0300 Subject: [PATCH] ltmain.sh: result of libtoolize --copy --force Organization: Private Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Signed-off-by: Jari Aalto --- ltmain.sh | 8887 ++++++++++++++++++++++++++++++++++++++++++------------------- 1 files changed, 6110 insertions(+), 2777 deletions(-) mode change 100644 => 100755 ltmain.sh diff --git a/ltmain.sh b/ltmain.sh old mode 100644 new mode 100755 index d8bbce4..d88da2c --- a/ltmain.sh +++ b/ltmain.sh @@ -1,44 +1,574 @@ -# ltmain.sh - Provide generalized library-building support services. -SED=sed -# ltmain.sh - Provide generalized library-building support services. -# NOTE: Changing this file will not affect anything until you rerun configure. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify +# Generated from ltmain.m4sh. + +# ltmain.sh (GNU libtool) 2.2.6b +# Written by Gordon Matzigkeit , 1996 + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # -# This program is distributed in the hope that it will be useful, but +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, +# or obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# Usage: $progname [OPTION]... [MODE-ARG]... +# +# Provide generalized library-building support services. +# +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print informational messages (default) +# --version print version information +# -h, --help print short or long help message +# +# MODE must be one of the following: +# +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory +# +# MODE-ARGS vary depending on the MODE. +# Try `$progname --help --mode=MODE' for a more detailed description of MODE. # -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. +# When reporting a bug, please describe a test case to reproduce it and +# include the following information: +# +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.2.6b Debian-2.2.6b-2 +# automake: $automake_version +# autoconf: $autoconf_version +# +# Report bugs to . + +PROGRAM=ltmain.sh +PACKAGE=libtool +VERSION="2.2.6b Debian-2.2.6b-2" +TIMESTAMP="" +package_revision=1.3017 + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# NLS nuisances: We save the old values to restore during execute mode. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). +lt_user_locale= +lt_safe_locale= +for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test \"\${$lt_var+set}\" = set; then + save_$lt_var=\$$lt_var + $lt_var=C + export $lt_var + lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" + lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + fi" +done + +$lt_unset CDPATH + + + + + +: ${CP="cp -f"} +: ${ECHO="echo"} +: ${EGREP="/bin/grep -E"} +: ${FGREP="/bin/grep -F"} +: ${GREP="/bin/grep"} +: ${LN_S="ln -s"} +: ${MAKE="make"} +: ${MKDIR="mkdir"} +: ${MV="mv -f"} +: ${RM="rm -f"} +: ${SED="/bin/sed"} +: ${SHELL="${CONFIG_SHELL-/bin/sh}"} +: ${Xsed="$SED -e 1s/^X//"} + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. + +exit_status=$EXIT_SUCCESS + +# Make sure IFS has a sensible default +lt_nl=' +' +IFS=" $lt_nl" + +dirname="s,/[^/]*$,," +basename="s,^.*/,," + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi + func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` +} + +# Generated shell functions inserted here. + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + +# The name of this program: +# In the unlikely event $progname began with a '-', it would play havoc with +# func_echo (imagine progname=-n), so we prepend ./ in that case: +func_dirname_and_basename "$progpath" +progname=$func_basename_result +case $progname in + -*) progname=./$progname ;; +esac + +# Make sure we have an absolute path for reexecution: +case $progpath in + [\\/]*|[A-Za-z]:\\*) ;; + *[\\/]*) + progdir=$func_dirname_result + progdir=`cd "$progdir" && pwd` + progpath="$progdir/$progname" + ;; + *) + save_IFS="$IFS" + IFS=: + for progdir in $PATH; do + IFS="$save_IFS" + test -x "$progdir/$progname" && break + done + IFS="$save_IFS" + test -n "$progdir" || progdir=`pwd` + progpath="$progdir/$progname" + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/\([`"$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Re-`\' parameter expansions in output of double_quote_subst that were +# `\'-ed in input to the same. If an odd number of `\' preceded a '$' +# in input to double_quote_subst, that '$' was protected from expansion. +# Since each input `\' is now two `\'s, look for any number of runs of +# four `\'s followed by two `\'s and then a '$'. `\' that '$'. +bs='\\' +bs2='\\\\' +bs4='\\\\\\\\' +dollar='\$' +sed_double_backslash="\ + s/$bs4/&\\ +/g + s/^$bs2$dollar/$bs&/ + s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g + s/\n//g" + +# Standard options: +opt_dry_run=false +opt_help=false +opt_quiet=false +opt_verbose=false +opt_warning=: + +# func_echo arg... +# Echo program name prefixed message, along with the current mode +# name if it has been set yet. +func_echo () +{ + $ECHO "$progname${mode+: }$mode: $*" +} + +# func_verbose arg... +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $opt_verbose && func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + +# func_error arg... +# Echo program name prefixed message to standard error. +func_error () +{ + $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 +} + +# func_warning arg... +# Echo program name prefixed warning message to standard error. +func_warning () +{ + $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 + + # bash bug again: + : +} + +# func_fatal_error arg... +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + func_error ${1+"$@"} + exit $EXIT_FAILURE +} + +# func_fatal_help arg... +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () +{ + func_error ${1+"$@"} + func_fatal_error "$help" +} +help="Try \`$progname --help' for more information." ## default + + +# func_grep expression filename +# Check whether EXPRESSION matches any line of FILENAME, without output. +func_grep () +{ + $GREP "$1" "$2" >/dev/null 2>&1 +} + + +# func_mkdir_p directory-path +# Make sure the entire path to DIRECTORY-PATH is available. +func_mkdir_p () +{ + my_directory_path="$1" + my_dir_list= + + if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + + # Protect directory names starting with `-' + case $my_directory_path in + -*) my_directory_path="./$my_directory_path" ;; + esac + + # While some portion of DIR does not yet exist... + while test ! -d "$my_directory_path"; do + # ...make a list in topmost first order. Use a colon delimited + # list incase some portion of path contains whitespace. + my_dir_list="$my_directory_path:$my_dir_list" + + # If the last portion added has no slash in it, the list is done + case $my_directory_path in */*) ;; *) break ;; esac + + # ...otherwise throw away the child directory and loop + my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` + done + my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` + + save_mkdir_p_IFS="$IFS"; IFS=':' + for my_dir in $my_dir_list; do + IFS="$save_mkdir_p_IFS" + # mkdir can fail with a `File exist' error if two processes + # try to create one of the directories concurrently. Don't + # stop in that case! + $MKDIR "$my_dir" 2>/dev/null || : + done + IFS="$save_mkdir_p_IFS" + + # Bail out if we (or some other process) failed to create a directory. + test -d "$my_directory_path" || \ + func_fatal_error "Failed to create \`$1'" + fi +} + + +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" + + if test "$opt_dry_run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else + + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || \ + func_fatal_error "cannot create temporary directory \`$my_tmpdir'" + fi + + $ECHO "X$my_tmpdir" | $Xsed +} + + +# func_quote_for_eval arg +# Aesthetically quote ARG to be evaled later. +# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT +# is double-quoted, suitable for a subsequent eval, whereas +# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters +# which are still active within double quotes backslashified. +func_quote_for_eval () +{ + case $1 in + *[\\\`\"\$]*) + func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; + *) + func_quote_for_eval_unquoted_result="$1" ;; + esac + + case $func_quote_for_eval_unquoted_result in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and and variable + # expansion for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" + ;; + *) + func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" + esac +} + + +# func_quote_for_expand arg +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + case $1 in + *[\\\`\"]*) + my_arg=`$ECHO "X$1" | $Xsed \ + -e "$double_quote_subst" -e "$sed_double_backslash"` ;; + *) + my_arg="$1" ;; + esac + + case $my_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + my_arg="\"$my_arg\"" + ;; + esac + + func_quote_for_expand_result="$my_arg" +} + -# Check that we have a working $echo. +# func_show_eval cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$my_cmd" + my_status=$? + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + +# func_show_eval_locale cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$lt_user_locale + $my_cmd" + my_status=$? + eval "$lt_safe_locale" + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + + + + +# func_version +# Echo version message to standard output and exit. +func_version () +{ + $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { + s/^# // + s/^# *$// + s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ + p + }' < "$progpath" + exit $? +} + +# func_usage +# Echo short help message to standard output and exit. +func_usage () +{ + $SED -n '/^# Usage:/,/# -h/ { + s/^# // + s/^# *$// + s/\$progname/'$progname'/ + p + }' < "$progpath" + $ECHO + $ECHO "run \`$progname --help | more' for full usage" + exit $? +} + +# func_help +# Echo long help message to standard output and exit. +func_help () +{ + $SED -n '/^# Usage:/,/# Report bugs to/ { + s/^# // + s/^# *$// + s*\$progname*'$progname'* + s*\$host*'"$host"'* + s*\$SHELL*'"$SHELL"'* + s*\$LTCC*'"$LTCC"'* + s*\$LTCFLAGS*'"$LTCFLAGS"'* + s*\$LD*'"$LD"'* + s/\$with_gnu_ld/'"$with_gnu_ld"'/ + s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ + p + }' < "$progpath" + exit $? +} + +# func_missing_arg argname +# Echo program name prefixed message to standard error and set global +# exit_cmd. +func_missing_arg () +{ + func_error "missing argument for $1" + exit_cmd=exit +} + +exit_cmd=: + + + + + +# Check that we have a working $ECHO. if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then + # Yippee, $ECHO works! : else - # Restart under the correct shell, and then maybe $echo will work. - exec $SHELL "$0" --no-reexec ${1+"$@"} + # Restart under the correct shell, and then maybe $ECHO will work. + exec $SHELL "$progpath" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then @@ -47,436 +577,706 @@ if test "X$1" = X--fallback-echo; then cat <&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 -fi +magic_exe="%%%MAGIC EXE variable%%%" # Global variables. -mode=$default_mode +# $mode is unset nonopt= -prev= -prevopt= -run= -show="$echo" -show_help= execute_dlfiles= +preserve_args= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" +extracted_archives= +extracted_serial=0 -# Parse our command line options once, thoroughly. -while test $# -gt 0 -do - arg="$1" - shift - - case $arg in - -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; - esac +opt_dry_run=false +opt_duplicate_deps=false +opt_silent=false +opt_debug=: - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - execute_dlfiles) - execute_dlfiles="$execute_dlfiles $arg" - ;; - *) - eval "$prev=\$arg" - ;; - esac +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= - prev= - prevopt= - continue - fi +# func_fatal_configuration arg... +# Echo program name prefixed message to standard error, followed by +# a configuration failure hint, and exit. +func_fatal_configuration () +{ + func_error ${1+"$@"} + func_error "See the $PACKAGE documentation for more information." + func_fatal_error "Fatal configuration error." +} - # Have we seen a non-optional argument yet? - case $arg in - --help) - show_help=yes - ;; - --version) - echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" - exit 0 - ;; +# func_config +# Display the configuration for all the tags in this script. +func_config () +{ + re_begincf='^# ### BEGIN LIBTOOL' + re_endcf='^# ### END LIBTOOL' - --config) - ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 - exit 0 - ;; + # Default configuration. + $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" - --debug) - echo "$progname: enabling shell trace mode" - set -x - ;; + # Now print the configurations for the tags. + for tagname in $taglist; do + $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + done - --dry-run | -n) - run=: - ;; + exit $? +} - --features) - echo "host: $host" +# func_features +# Display the features supported by this script. +func_features () +{ + $ECHO "host: $host" if test "$build_libtool_libs" = yes; then - echo "enable shared libraries" + $ECHO "enable shared libraries" else - echo "disable shared libraries" + $ECHO "disable shared libraries" fi if test "$build_old_libs" = yes; then - echo "enable static libraries" + $ECHO "enable static libraries" else - echo "disable static libraries" + $ECHO "disable static libraries" fi - exit 0 - ;; - --finish) mode="finish" ;; + exit $? +} - --mode) prevopt="--mode" prev=mode ;; - --mode=*) mode="$optarg" ;; +# func_enable_tag tagname +# Verify that TAGNAME is valid, and either flag an error and exit, or +# enable the TAGNAME tag. We also add TAGNAME to the global $taglist +# variable here. +func_enable_tag () +{ + # Global variable: + tagname="$1" + + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf="/$re_begincf/,/$re_endcf/p" + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac - --preserve-dup-deps) duplicate_deps="yes" ;; + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; + *) + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" + + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac +} - --quiet | --silent) - show=: - ;; +# Parse options once, thoroughly. This comes as soon as possible in +# the script to make things like `libtool --version' happen quickly. +{ - -dlopen) - prevopt="-dlopen" - prev=execute_dlfiles + # Shorthand for --mode=foo, only valid as the first argument + case $1 in + clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift ;; - - -*) - $echo "$modename: unrecognized option \`$arg'" 1>&2 - $echo "$help" 1>&2 - exit 1 + compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift ;; - - *) - nonopt="$arg" - break + execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; + finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; + install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; + link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; + uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift ;; esac -done - -if test -n "$prevopt"; then - $echo "$modename: option \`$prevopt' requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 -fi -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= + # Parse non-mode specific arguments: + while test "$#" -gt 0; do + opt="$1" + shift + + case $opt in + --config) func_config ;; + + --debug) preserve_args="$preserve_args $opt" + func_echo "enabling shell trace mode" + opt_debug='set -x' + $opt_debug + ;; + + -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break + execute_dlfiles="$execute_dlfiles $1" + shift + ;; + + --dry-run | -n) opt_dry_run=: ;; + --features) func_features ;; + --finish) mode="finish" ;; + + --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break + case $1 in + # Valid mode arguments: + clean) ;; + compile) ;; + execute) ;; + finish) ;; + install) ;; + link) ;; + relink) ;; + uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; + esac + + mode="$1" + shift + ;; + + --preserve-dup-deps) + opt_duplicate_deps=: ;; + + --quiet|--silent) preserve_args="$preserve_args $opt" + opt_silent=: + ;; + + --verbose| -v) preserve_args="$preserve_args $opt" + opt_silent=false + ;; + + --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break + preserve_args="$preserve_args $opt $1" + func_enable_tag "$1" # tagname is set here + shift + ;; + + # Separate optargs to long options: + -dlopen=*|--mode=*|--tag=*) + func_opt_split "$opt" + set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} + shift + ;; + + -\?|-h) func_usage ;; + --help) opt_help=: ;; + --version) func_version ;; + + -*) func_fatal_help "unrecognized option \`$opt'" ;; + + *) nonopt="$opt" + break + ;; + esac + done -if test -z "$show_help"; then - # Infer the operation mode. - if test -z "$mode"; then - case $nonopt in - *cc | *++ | gcc* | *-gcc* | xlc*) - mode=link - for arg - do - case $arg in - -c) - mode=compile - break - ;; - esac - done - ;; - *db | *dbx | *strace | *truss) - mode=execute - ;; - *install*|cp|mv) - mode=install - ;; - *rm) - mode=uninstall + case $host in + *cygwin* | *mingw* | *pw32* | *cegcc*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: ;; *) - # If we have no mode, but dlfiles were specified, then do execute mode. - test -n "$execute_dlfiles" && mode=execute + opt_duplicate_compiler_generated_deps=$opt_duplicate_deps + ;; + esac - # Just use the default operation mode. - if test -z "$mode"; then - if test -n "$nonopt"; then - $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 - else - $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 - fi + # Having warned about all mis-specified options, bail out if + # anything was wrong. + $exit_cmd $EXIT_FAILURE +} + +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF fi - ;; - esac + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF + fi + + exit $EXIT_MISMATCH fi +} + + +## ----------- ## +## Main. ## +## ----------- ## + +$opt_help || { + # Sanity checks first: + func_check_version_match + + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" + fi + + test -z "$mode" && func_fatal_error "error: you must specify a MODE." + + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + # Only execute mode is allowed to have -dlopen flags. if test -n "$execute_dlfiles" && test "$mode" != execute; then - $echo "$modename: unrecognized option \`-dlopen'" 1>&2 - $echo "$help" 1>&2 - exit 1 + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help="$help" - help="Try \`$modename --help --mode=$mode' for more information." + help="Try \`$progname --help --mode=$mode' for more information." +} - # These modes are in order of execution frequency so that they run quickly. - case $mode in - # libtool compile mode - compile) - modename="$modename: compile" - # Get the compilation command and the source file. - base_compile= - prev= - lastarg= - srcfile="$nonopt" - suppress_output= - user_target=no - for arg - do - case $prev in - "") ;; - xcompiler) - # Aesthetically quote the previous argument. - prev= - lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +# func_lalib_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_lalib_p () +{ + test -f "$1" && + $SED -e 4q "$1" 2>/dev/null \ + | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} - case $arg in - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac +# func_lalib_unsafe_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function implements the same check as func_lalib_p without +# resorting to external programs. To this end, it redirects stdin and +# closes it afterwards, without saving the original file descriptor. +# As a safety measure, use it only where a negative result would be +# fatal anyway. Works if `file' does not exist. +func_lalib_unsafe_p () +{ + lalib_p=no + if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then + for lalib_p_l in 1 2 3 4 + do + read lalib_p_line + case "$lalib_p_line" in + \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; + esac + done + exec 0<&5 5<&- + fi + test "$lalib_p" = yes +} - # Add the previous argument to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - continue - ;; - esac +# func_ltwrapper_script_p file +# True iff FILE is a libtool wrapper script +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_script_p () +{ + func_lalib_p "$1" +} - # Accept any command-line options. - case $arg in - -o) - if test "$user_target" != "no"; then - $echo "$modename: you cannot specify \`-o' more than once" 1>&2 - exit 1 - fi - user_target=next - ;; +# func_ltwrapper_executable_p file +# True iff FILE is a libtool wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_executable_p () +{ + func_ltwrapper_exec_suffix= + case $1 in + *.exe) ;; + *) func_ltwrapper_exec_suffix=.exe ;; + esac + $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 +} - -static) - build_old_libs=yes - continue - ;; +# func_ltwrapper_scriptname file +# Assumes file is an ltwrapper_executable +# uses $file to determine the appropriate filename for a +# temporary ltwrapper_script. +func_ltwrapper_scriptname () +{ + func_ltwrapper_scriptname_result="" + if func_ltwrapper_executable_p "$1"; then + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" + fi +} - -prefer-pic) - pic_mode=yes - continue - ;; +# func_ltwrapper_p file +# True iff FILE is a libtool wrapper script or wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_p () +{ + func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" +} - -prefer-non-pic) - pic_mode=no - continue - ;; - -Xcompiler) - prev=xcompiler - continue - ;; +# func_execute_cmds commands fail_cmd +# Execute tilde-delimited COMMANDS. +# If FAIL_CMD is given, eval that upon failure. +# FAIL_CMD may read-access the current command in variable CMD! +func_execute_cmds () +{ + $opt_debug + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$save_ifs + eval cmd=\"$cmd\" + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +} - -Wc,*) - args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` - lastarg= - save_ifs="$IFS"; IFS=',' - for arg in $args; do - IFS="$save_ifs" - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - lastarg="$lastarg $arg" - done - IFS="$save_ifs" - lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` +# func_source file +# Source FILE, adding directory component if necessary. +# Note that it is not necessary on cygwin/mingw to append a dot to +# FILE even if both FILE and FILE.exe exist: automatic-append-.exe +# behavior happens only for exec(3), not for open(2)! Also, sourcing +# `FILE.' does not work on cygwin managed mounts. +func_source () +{ + $opt_debug + case $1 in + */* | *\\*) . "$1" ;; + *) . "./$1" ;; + esac +} - # Add the arguments to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + $opt_debug + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" + done + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" + done + case "$@ " in + " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + func_echo "unable to infer tagged configuration" + func_fatal_error "specify a tag with \`--tag'" +# else +# func_verbose "using $tagname tagged configuration" fi - continue ;; esac + fi +} - case $user_target in - next) - # The next one is the -o target name - user_target=yes - continue + + +# func_write_libtool_object output_name pic_name nonpic_name +# Create a libtool object file (analogous to a ".la" file), +# but don't create it if we're doing a dry run. +func_write_libtool_object () +{ + write_libobj=${1} + if test "$build_libtool_libs" = yes; then + write_lobj=\'${2}\' + else + write_lobj=none + fi + + if test "$build_old_libs" = yes; then + write_oldobj=\'${3}\' + else + write_oldobj=none + fi + + $opt_dry_run || { + cat >${write_libobj}T <\?\'\ \ ]*|*]*|"") - lastarg="\"$lastarg\"" + -no-suppress) + suppress_opt=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + func_quote_for_eval "$arg" + lastarg="$lastarg $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$lastarg" + lastarg=$func_stripname_result + + # Add the arguments to base_compile. + base_compile="$base_compile $lastarg" + continue + ;; + + *) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg ;; - esac + esac # case $arg_mode - # Add the previous argument to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - done + # Aesthetically quote the previous argument. + func_quote_for_eval "$lastarg" + base_compile="$base_compile $func_quote_for_eval_result" + done # for arg - case $user_target in - set) + case $arg_mode in + arg) + func_fatal_error "you must specify an argument for -Xcompile" ;; - no) - # Get the name of the library object. - libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + target) + func_fatal_error "you must specify a target with \`-o'" ;; *) - $echo "$modename: you must specify a target with \`-o'" 1>&2 - exit 1 + # Get the name of the library object. + test -z "$libobj" && { + func_basename "$srcfile" + libobj="$func_basename_result" + } ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo - xform='[cCFSfmso]' case $libobj in - *.ada) xform=ada ;; - *.adb) xform=adb ;; - *.ads) xform=ads ;; - *.asm) xform=asm ;; - *.c++) xform=c++ ;; - *.cc) xform=cc ;; - *.cpp) xform=cpp ;; - *.cxx) xform=cxx ;; - *.f90) xform=f90 ;; - *.for) xform=for ;; + *.[cCFSifmso] | \ + *.ada | *.adb | *.ads | *.asm | \ + *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ + *.[fF][09]? | *.for | *.java | *.obj | *.sx) + func_xform "$libobj" + libobj=$func_xform_result + ;; esac - libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` - case $libobj in - *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; + *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; *) - $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 - exit 1 + func_fatal_error "cannot determine name of library object from \`$libobj'" ;; esac - if test -z "$base_compile"; then - $echo "$modename: you must specify a compilation command" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + continue + ;; + + -static) + build_libtool_libs=no + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + func_quote_for_eval "$libobj" + test "X$libobj" != "X$func_quote_for_eval_result" \ + && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && func_warning "libobj name \`$libobj' may not contain shell special characters." + func_dirname_and_basename "$obj" "/" "" + objname="$func_basename_result" + xdir="$func_dirname_result" + lobj=${xdir}$objdir/$objname + + test -z "$base_compile" && \ + func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. if test "$build_old_libs" = yes; then - removelist="$obj $libobj" + removelist="$obj $lobj $libobj ${libobj}T" else - removelist="$libobj" + removelist="$lobj $libobj ${libobj}T" fi - $run $rm $removelist - trap "$run $rm $removelist; exit 1" 1 2 15 - # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in - cygwin* | mingw* | pw32* | os2*) + cygwin* | mingw* | pw32* | os2* | cegcc*) pic_mode=default ;; esac @@ -488,11 +1288,10 @@ if test -z "$show_help"; then # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then - output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" - removelist="$removelist $output_obj $lockfile" - trap "$run $rm $removelist; exit 1" 1 2 15 else + output_obj= need_locks=no lockfile= fi @@ -500,13 +1299,13 @@ if test -z "$show_help"; then # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then - until $run ln "$0" "$lockfile" 2>/dev/null; do - $show "Waiting for $lockfile to be removed" + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then - echo "\ + $ECHO "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` @@ -517,15 +1316,22 @@ repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." - $run $rm $removelist - exit 1 + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE fi - echo $srcfile > "$lockfile" + removelist="$removelist $output_obj" + $ECHO "$srcfile" > "$lockfile" fi + $opt_dry_run || $RM $removelist + removelist="$removelist $lockfile" + trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 + if test -n "$fix_srcfile_path"; then eval srcfile=\"$fix_srcfile_path\" fi + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result # Only build a PIC object if we are building libtool libraries. if test "$build_libtool_libs" = yes; then @@ -533,53 +1339,25 @@ compiler." fbsd_hideous_sh_bug=$base_compile if test "$pic_mode" != no; then - # All platforms use -DPIC, to notify preprocessed assembler code. - command="$base_compile $srcfile $pic_flag -DPIC" + command="$base_compile $qsrcfile $pic_flag" else # Don't build PIC code - command="$base_compile $srcfile" + command="$base_compile $qsrcfile" fi - if test "$build_old_libs" = yes; then - lo_libobj="$libobj" - dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$libobj"; then - dir="$objdir" - else - dir="$dir/$objdir" - fi - libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` - if test -d "$dir"; then - $show "$rm $libobj" - $run $rm $libobj - else - $show "$mkdir $dir" - $run $mkdir $dir - status=$? - if test $status -ne 0 && test ! -d $dir; then - exit $status - fi - fi - fi - if test "$compiler_o_lo" = yes; then - output_obj="$libobj" - command="$command -o $output_obj" - elif test "$compiler_c_o" = yes; then - output_obj="$obj" - command="$command -o $output_obj" - fi + func_mkdir_p "$xdir$objdir" - $run $rm "$output_obj" - $show "$command" - if $run eval "$command"; then : - else - test -n "$output_obj" && $run $rm $removelist - exit 1 + if test -z "$output_obj"; then + # Place PIC objects in $objdir + command="$command -o $lobj" fi + func_show_eval_locale "$command" \ + 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' + if test "$need_locks" = warn && - test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then - echo "\ + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` @@ -593,92 +1371,42 @@ repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." - $run $rm $removelist - exit 1 + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one - if test x"$output_obj" != x"$libobj"; then - $show "$mv $output_obj $libobj" - if $run $mv $output_obj $libobj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # If we have no pic_flag, then copy the object into place and finish. - if (test -z "$pic_flag" || test "$pic_mode" != default) && - test "$build_old_libs" = yes; then - # Rename the .lo from within objdir to obj - if test -f $obj; then - $show $rm $obj - $run $rm $obj - fi - - $show "$mv $libobj $obj" - if $run $mv $libobj $obj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"` - libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` - # Now arrange that obj and lo_libobj become the same file - $show "(cd $xdir && $LN_S $baseobj $libobj)" - if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then - # Unlock the critical section if it was locked - if test "$need_locks" != no; then - $run $rm "$lockfile" - fi - exit 0 - else - error=$? - $run $rm $removelist - exit $error - fi + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + func_show_eval '$MV "$output_obj" "$lobj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi # Allow error messages only from the first compilation. - suppress_output=' >/dev/null 2>&1' + if test "$suppress_opt" = yes; then + suppress_output=' >/dev/null 2>&1' + fi fi # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then if test "$pic_mode" != yes; then # Don't build PIC code - command="$base_compile $srcfile" + command="$base_compile $qsrcfile$pie_flag" else - # All platforms use -DPIC, to notify preprocessed assembler code. - command="$base_compile $srcfile $pic_flag -DPIC" + command="$base_compile $qsrcfile $pic_flag" fi if test "$compiler_c_o" = yes; then command="$command -o $obj" - output_obj="$obj" fi # Suppress compiler output if we already did a PIC compilation. command="$command$suppress_output" - $run $rm "$output_obj" - $show "$command" - if $run eval "$command"; then : - else - $run $rm $removelist - exit 1 - fi + func_show_eval_locale "$command" \ + '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && - test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then - echo "\ + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` @@ -692,55 +1420,2624 @@ repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." - $run $rm $removelist - exit 1 + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE fi # Just move the object if needed - if test x"$output_obj" != x"$obj"; then - $show "$mv $output_obj $obj" - if $run $mv $output_obj $obj; then : + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + func_show_eval '$MV "$output_obj" "$obj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + fi + + $opt_dry_run || { + func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + removelist=$lockfile + $RM "$lockfile" + fi + } + + exit $EXIT_SUCCESS +} + +$opt_help || { +test "$mode" = compile && func_mode_compile ${1+"$@"} +} + +func_mode_help () +{ + # We need to display help for each of the modes. + case $mode in + "") + # Generic help is extracted from the usage comments + # at the start of this file. + func_help + ;; + + clean) + $ECHO \ +"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + + compile) + $ECHO \ +"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only + -shared do not build a \`.o' file suitable for static linking + -static only build a \`.o' file suitable for static linking + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + + execute) + $ECHO \ +"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + + finish) + $ECHO \ +"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + + install) + $ECHO \ +"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The following components of INSTALL-COMMAND are treated specially: + + -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + + link) + $ECHO \ +"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + + uninstall) + $ECHO \ +"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + + *) + func_fatal_help "invalid operation mode \`$mode'" + ;; + esac + + $ECHO + $ECHO "Try \`$progname --help' for more information about other modes." + + exit $? +} + + # Now that we've collected a possible --mode arg, show help if necessary + $opt_help && func_mode_help + + +# func_mode_execute arg... +func_mode_execute () +{ + $opt_debug + # The first argument is the command name. + cmd="$nonopt" + test -z "$cmd" && \ + func_fatal_help "you must specify a COMMAND" + + # Handle -dlopen flags immediately. + for file in $execute_dlfiles; do + test -f "$file" \ + || func_fatal_help "\`$file' is not a file" + + dir= + case $file in + *.la) + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$lib' is not a valid libtool archive" + + # Read the libtool library. + dlname= + library_names= + func_source "$file" + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && \ + func_warning "\`$file' was not linked with \`-export-dynamic'" + continue + fi + + func_dirname "$file" "" "." + dir="$func_dirname_result" + + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" else - error=$? - $run $rm $removelist - exit $error + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + fi fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + func_dirname "$file" "" "." + dir="$func_dirname_result" + ;; + + *) + func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi + done - # Create an invalid libtool object if no PIC, so that we do not - # accidentally link it into a program. - if test "$build_libtool_libs" != yes; then - $show "echo timestamp > $libobj" - $run eval "echo timestamp > \$libobj" || exit $? + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -*) ;; + *) + # Do a test to see if this is really a libtool program. + if func_ltwrapper_script_p "$file"; then + func_source "$file" + # Transform arg to wrapped name. + file="$progdir/$program" + elif func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + func_source "$func_ltwrapper_scriptname_result" + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + func_quote_for_eval "$file" + args="$args $func_quote_for_eval_result" + done + + if test "X$opt_dry_run" = Xfalse; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + $ECHO "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + fi +} + +test "$mode" = execute && func_mode_execute ${1+"$@"} + + +# func_mode_finish arg... +func_mode_finish () +{ + $opt_debug + libdirs="$nonopt" + admincmds= + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + func_execute_cmds "$finish_cmds" 'admincmds="$admincmds +'"$cmd"'"' + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $opt_dry_run || eval "$cmds" || admincmds="$admincmds + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + $opt_silent && exit $EXIT_SUCCESS + + $ECHO "X----------------------------------------------------------------------" | $Xsed + $ECHO "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + $ECHO + $ECHO "If you ever happen to want to link against installed libraries" + $ECHO "in a given directory, LIBDIR, you must either use libtool, and" + $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" + $ECHO "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" + $ECHO " during execution" + fi + if test -n "$runpath_var"; then + $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" + $ECHO " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + $ECHO + + $ECHO "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" + $ECHO "pages." + ;; + *) + $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + $ECHO "X----------------------------------------------------------------------" | $Xsed + exit $EXIT_SUCCESS +} + +test "$mode" = finish && func_mode_finish ${1+"$@"} + + +# func_mode_install arg... +func_mode_install () +{ + $opt_debug + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + $ECHO "X$nonopt" | $GREP shtool >/dev/null; then + # Aesthetically quote it. + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " + arg=$1 + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" + install_prog="$install_prog$func_quote_for_eval_result" + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + for arg + do + if test -n "$dest"; then + files="$files $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) + case " $install_prog " in + *[\\\ /]cp\ *) ;; + *) prev=$arg ;; + esac + ;; + -g | -m | -o) + prev=$arg + ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + func_quote_for_eval "$arg" + install_prog="$install_prog $func_quote_for_eval_result" + done + + test -z "$install_prog" && \ + func_fatal_help "you must specify an install program" + + test -n "$prev" && \ + func_fatal_help "the \`$prev' option requires an argument" + + if test -z "$files"; then + if test -z "$dest"; then + func_fatal_help "no file or destination specified" else - # Move the .lo from within objdir - $show "$mv $libobj $lo_libobj" - if $run $mv $libobj $lo_libobj; then : + func_fatal_help "you must specify a destination" + fi + fi + + # Strip any trailing slash from the destination. + func_stripname '' '/' "$dest" + dest=$func_stripname_result + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + func_dirname_and_basename "$dest" "" "." + destdir="$func_dirname_result" + destname="$func_basename_result" + + # Not a directory, so check to see that there is only one file specified. + set dummy $files; shift + test "$#" -gt 1 && \ + func_fatal_help "\`$dest' is not a directory" + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + func_fatal_help "\`$destdir' must be an absolute directory name" + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + staticlibs="$staticlibs $file" + ;; + + *.la) + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$file' is not a valid libtool archive" + + library_names= + old_library= + relink_command= + func_source "$file" + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) current_libdirs="$current_libdirs $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) future_libdirs="$future_libdirs $libdir" ;; + esac + fi + + func_dirname "$file" "/" "" + dir="$func_dirname_result" + dir="$dir$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + test "$inst_prefix_dir" = "$destdir" && \ + func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` + fi + + func_warning "relinking \`$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + fi + + # See the names of the shared library. + set dummy $library_names; shift + if test -n "$1"; then + realname="$1" + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ + 'exit $?' + tstripme="$stripme" + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + case $realname in + *.dll.a) + tstripme="" + ;; + esac + ;; + esac + if test -n "$tstripme" && test -n "$striplib"; then + func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + test "$linkname" != "$realname" \ + && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + func_execute_cmds "$postinstall_cmds" 'exit $?' + fi + + # Install the pseudo-library for information purposes. + func_basename "$file" + name="$func_basename_result" + instname="$dir/$name"i + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + + # Maybe install the static library, too. + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" else - error=$? - $run $rm $removelist - exit $error + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + func_lo2o "$destfile" + staticdest=$func_lo2o_result + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + func_fatal_help "cannot copy a libtool object to \`$destfile'" + ;; + esac + + # Install the libtool object if requested. + test -n "$destfile" && \ + func_show_eval "$install_prog $file $destfile" 'exit $?' + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + func_lo2o "$file" + staticobj=$func_lo2o_result + func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + func_stripname '' '.exe' "$file" + file=$func_stripname_result + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin* | *mingw*) + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + wrapper=$func_ltwrapper_scriptname_result + else + func_stripname '' '.exe' "$file" + wrapper=$func_stripname_result + fi + ;; + *) + wrapper=$file + ;; + esac + if func_ltwrapper_script_p "$wrapper"; then + notinst_deplibs= + relink_command= + + func_source "$wrapper" + + # Check the variables that should have been set. + test -z "$generated_by_libtool_version" && \ + func_fatal_error "invalid libtool wrapper script \`$wrapper'" + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + func_source "$lib" + fi + libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + func_warning "\`$lib' has not been installed in \`$libdir'" + finalize=no + fi + done + + relink_command= + func_source "$wrapper" + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + $opt_dry_run || { + if test "$finalize" = yes; then + tmpdir=`func_mktempdir` + func_basename "$file$stripped_ext" + file="$func_basename_result" + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + + $opt_silent || { + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" + } + if eval "$relink_command"; then : + else + func_error "error: relink \`$file' with the above command before installing it" + $opt_dry_run || ${RM}r "$tmpdir" + continue + fi + file="$outputname" + else + func_warning "cannot relink \`$file'" + fi + } + else + # Install the binary that we compiled earlier. + file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + func_stripname '' '.exe' "$destfile" + destfile=$func_stripname_result + ;; + esac + ;; + esac + func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' + $opt_dry_run || if test -n "$outputname"; then + ${RM}r "$tmpdir" + fi + ;; + esac + done + + for file in $staticlibs; do + func_basename "$file" + name="$func_basename_result" + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + + func_show_eval "$install_prog \$file \$oldlib" 'exit $?' + + if test -n "$stripme" && test -n "$old_striplib"; then + func_show_eval "$old_striplib $oldlib" 'exit $?' fi + + # Do each command in the postinstall commands. + func_execute_cmds "$old_postinstall_cmds" 'exit $?' + done + + test -n "$future_libdirs" && \ + func_warning "remember to run \`$progname --finish$future_libdirs'" + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS fi +} - # Unlock the critical section if it was locked - if test "$need_locks" != no; then - $run $rm "$lockfile" +test "$mode" = install && func_mode_install ${1+"$@"} + + +# func_generate_dlsyms outputname originator pic_p +# Extract symbols from dlprefiles and create ${outputname}S.o with +# a dlpreopen symbol table. +func_generate_dlsyms () +{ + $opt_debug + my_outputname="$1" + my_originator="$2" + my_pic_p="${3-no}" + my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + my_dlsyms= + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + my_dlsyms="${my_outputname}S.c" + else + func_error "not configured to extract global symbols from dlpreopened files" + fi fi - exit 0 + if test -n "$my_dlsyms"; then + case $my_dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${my_outputname}.nm" + + func_show_eval "$RM $nlist ${nlist}S ${nlist}T" + + # Parse the name list into a source file. + func_verbose "creating $output_objdir/$my_dlsyms" + + $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ +/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + func_verbose "generating symbol list for \`$output'" + + $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + for progfile in $progfiles; do + func_verbose "extracting global C symbols from \`$progfile'" + $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $opt_dry_run || { + eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + if test -n "$export_symbols_regex"; then + $opt_dry_run || { + eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $opt_dry_run || { + $RM $export_symbols + eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + } + else + $opt_dry_run || { + eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + } + fi + fi + + for dlprefile in $dlprefiles; do + func_verbose "extracting global C symbols from \`$dlprefile'" + func_basename "$dlprefile" + name="$func_basename_result" + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + done + + $opt_dry_run || { + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $MV "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if $GREP -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + $GREP -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else + $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi + + $ECHO >> "$output_objdir/$my_dlsyms" "\ + +/* The mapping between symbol names and symbols. */ +typedef struct { + const char *name; + void *address; +} lt_dlsymlist; +" + case $host in + *cygwin* | *mingw* | *cegcc* ) + $ECHO >> "$output_objdir/$my_dlsyms" "\ +/* DATA imports from DLLs on WIN32 con't be const, because + runtime relocations are performed -- see ld's documentation + on pseudo-relocs. */" + lt_dlsym_const= ;; + *osf5*) + echo >> "$output_objdir/$my_dlsyms" "\ +/* This system does not cope well with relocations in const data */" + lt_dlsym_const= ;; + *) + lt_dlsym_const=const ;; + esac + + $ECHO >> "$output_objdir/$my_dlsyms" "\ +extern $lt_dlsym_const lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[]; +$lt_dlsym_const lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[] = +{\ + { \"$my_originator\", (void *) 0 }," + + case $need_lib_prefix in + no) + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + *) + eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + esac + $ECHO >> "$output_objdir/$my_dlsyms" "\ + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_${my_prefix}_LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + } # !$opt_dry_run + + pic_flag_for_symtable= + case "$compile_command " in + *" -static "*) ;; + *) + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; + *-*-hpux*) + pic_flag_for_symtable=" $pic_flag" ;; + *) + if test "X$my_pic_p" != Xno; then + pic_flag_for_symtable=" $pic_flag" + fi + ;; + esac + ;; + esac + symtab_cflags= + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; + *) symtab_cflags="$symtab_cflags $arg" ;; + esac + done + + # Now compile the dynamic symbol file. + func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + + # Clean up the generated files. + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' + + # Transform the symbol file into the correct name. + symfileobj="$output_objdir/${my_outputname}S.$objext" + case $host in + *cygwin* | *mingw* | *cegcc* ) + if test -f "$output_objdir/$my_outputname.def"; then + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + else + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + fi + ;; + *) + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + ;; + esac + ;; + *) + func_fatal_error "unknown suffix for \`$my_dlsyms'" + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + fi +} + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +func_win32_libid () +{ + $opt_debug + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" ;; + *ar\ archive*) # could be an import, or static + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | + $SED -n -e ' + 1,100{ + / I /{ + s,.*,import, + p + q + } + }'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $ECHO "$win32_libid_type" +} + + - # libtool link mode - link | relink) - modename="$modename: link" +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + $opt_debug + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" + fi +} + + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + $opt_debug + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + func_basename "$my_xlib" + my_xlib="$func_basename_result" + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + func_arith $extracted_serial + 1 + extracted_serial=$func_arith_result + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" + + func_mkdir_p "$my_xdir" + + case $host in + *-darwin*) + func_verbose "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + $opt_dry_run || { + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`basename "$darwin_archive"` + darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` + if test -n "$darwin_arches"; then + darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we've a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` + $LIPO -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + $RM -rf unfat-$$ + cd "$darwin_orig_dir" + else + cd $darwin_orig_dir + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + } # !$opt_dry_run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done + + func_extract_archives_result="$my_oldobjs" +} + + + +# func_emit_wrapper_part1 [arg=no] +# +# Emit the first part of a libtool wrapper script on stdout. +# For more information, see the description associated with +# func_emit_wrapper(), below. +func_emit_wrapper_part1 () +{ + func_emit_wrapper_part1_arg1=no + if test -n "$1" ; then + func_emit_wrapper_part1_arg1=$1 + fi + + $ECHO "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='${SED} -e 1s/^X//' +sed_quote_subst='$sed_quote_subst' + +# Be Bourne compatible +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variables: + generated_by_libtool_version='$macro_version' + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$ECHO are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + ECHO=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$ECHO works! + : + else + # Restart under the correct shell, and then maybe \$ECHO will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ +" + $ECHO "\ + + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` + done +" +} +# end: func_emit_wrapper_part1 + +# func_emit_wrapper_part2 [arg=no] +# +# Emit the second part of a libtool wrapper script on stdout. +# For more information, see the description associated with +# func_emit_wrapper(), below. +func_emit_wrapper_part2 () +{ + func_emit_wrapper_part2_arg1=no + if test -n "$1" ; then + func_emit_wrapper_part2_arg1=$1 + fi + + $ECHO "\ + + # Usually 'no', except on cygwin/mingw when embedded into + # the cwrapper. + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1 + if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then + # special case for '.' + if test \"\$thisdir\" = \".\"; then + thisdir=\`pwd\` + fi + # remove .libs from thisdir + case \"\$thisdir\" in + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; + $objdir ) thisdir=. ;; + esac + fi + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $ECHO "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $MKDIR \"\$progdir\" + else + $RM \"\$progdir/\$file\" + fi" + + $ECHO "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" + exit 1 + fi + fi + + $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $RM \"\$progdir/\$program\"; + $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $RM \"\$progdir/\$file\" + fi" + else + $ECHO "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $ECHO "\ + + if test -f \"\$progdir/\$program\"; then" + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + + export $shlibpath_var +" + fi + + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 + fi + else + # The program doesn't exist. + \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 + $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" +} +# end: func_emit_wrapper_part2 + + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=no + if test -n "$1" ; then + func_emit_wrapper_arg1=$1 + fi + + # split this up so that func_emit_cwrapperexe_src + # can call each part independently. + func_emit_wrapper_part1 "${func_emit_wrapper_arg1}" + func_emit_wrapper_part2 "${func_emit_wrapper_arg1}" +} + + +# func_to_host_path arg +# +# Convert paths to host format when used with build tools. +# Intended for use with "native" mingw (where libtool itself +# is running under the msys shell), or in the following cross- +# build environments: +# $build $host +# mingw (msys) mingw [e.g. native] +# cygwin mingw +# *nix + wine mingw +# where wine is equipped with the `winepath' executable. +# In the native mingw case, the (msys) shell automatically +# converts paths for any non-msys applications it launches, +# but that facility isn't available from inside the cwrapper. +# Similar accommodations are necessary for $host mingw and +# $build cygwin. Calling this function does no harm for other +# $host/$build combinations not listed above. +# +# ARG is the path (on $build) that should be converted to +# the proper representation for $host. The result is stored +# in $func_to_host_path_result. +func_to_host_path () +{ + func_to_host_path_result="$1" + if test -n "$1" ; then + case $host in + *mingw* ) + lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + case $build in + *mingw* ) # actually, msys + # awkward: cmd appends spaces to result + lt_sed_strip_trailing_spaces="s/[ ]*\$//" + func_to_host_path_tmp1=`( cmd //c echo "$1" |\ + $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + *cygwin* ) + func_to_host_path_tmp1=`cygpath -w "$1"` + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + * ) + # Unfortunately, winepath does not exit with a non-zero + # error code, so we are forced to check the contents of + # stdout. On the other hand, if the command is not + # found, the shell will set an exit code of 127 and print + # *an error message* to stdout. So we must check for both + # error code of zero AND non-empty stdout, which explains + # the odd construction: + func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` + if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + else + # Allow warning below. + func_to_host_path_result="" + fi + ;; + esac + if test -z "$func_to_host_path_result" ; then + func_error "Could not determine host path corresponding to" + func_error " '$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_path_result="$1" + fi + ;; + esac + fi +} +# end: func_to_host_path + +# func_to_host_pathlist arg +# +# Convert pathlists to host format when used with build tools. +# See func_to_host_path(), above. This function supports the +# following $build/$host combinations (but does no harm for +# combinations not listed here): +# $build $host +# mingw (msys) mingw [e.g. native] +# cygwin mingw +# *nix + wine mingw +# +# Path separators are also converted from $build format to +# $host format. If ARG begins or ends with a path separator +# character, it is preserved (but converted to $host format) +# on output. +# +# ARG is a pathlist (on $build) that should be converted to +# the proper representation on $host. The result is stored +# in $func_to_host_pathlist_result. +func_to_host_pathlist () +{ + func_to_host_pathlist_result="$1" + if test -n "$1" ; then + case $host in + *mingw* ) + lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_to_host_pathlist_tmp2="$1" + # Once set for this call, this variable should not be + # reassigned. It is used in tha fallback case. + func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e 's|^:*||' -e 's|:*$||'` + case $build in + *mingw* ) # Actually, msys. + # Awkward: cmd appends spaces to result. + lt_sed_strip_trailing_spaces="s/[ ]*\$//" + func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\ + $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + *cygwin* ) + func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"` + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + * ) + # unfortunately, winepath doesn't convert pathlists + func_to_host_pathlist_result="" + func_to_host_pathlist_oldIFS=$IFS + IFS=: + for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do + IFS=$func_to_host_pathlist_oldIFS + if test -n "$func_to_host_pathlist_f" ; then + func_to_host_path "$func_to_host_pathlist_f" + if test -n "$func_to_host_path_result" ; then + if test -z "$func_to_host_pathlist_result" ; then + func_to_host_pathlist_result="$func_to_host_path_result" + else + func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result" + fi + fi + fi + IFS=: + done + IFS=$func_to_host_pathlist_oldIFS + ;; + esac + if test -z "$func_to_host_pathlist_result" ; then + func_error "Could not determine the host path(s) corresponding to" + func_error " '$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This may break if $1 contains DOS-style drive + # specifications. The fix is not to complicate the expression + # below, but for the user to provide a working wine installation + # with winepath so that path translation in the cross-to-mingw + # case works properly. + lt_replace_pathsep_nix_to_dos="s|:|;|g" + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ + $SED -e "$lt_replace_pathsep_nix_to_dos"` + fi + # Now, add the leading and trailing path separators back + case "$1" in + :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" + ;; + esac + case "$1" in + *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;" + ;; + esac + ;; + esac + fi +} +# end: func_to_host_pathlist + +# func_emit_cwrapperexe_src +# emit the source code for a wrapper executable on stdout +# Must ONLY be called from within func_mode_link because +# it depends on a number of variable set therein. +func_emit_cwrapperexe_src () +{ + cat < +#include +#ifdef _MSC_VER +# include +# include +# include +# define setmode _setmode +#else +# include +# include +# ifdef __CYGWIN__ +# include +# define HAVE_SETENV +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif +# endif +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef S_IXOTH +# define S_IXOTH 0 +#endif +#ifndef S_IXGRP +# define S_IXGRP 0 +#endif + +#ifdef _MSC_VER +# define S_IXUSR _S_IEXEC +# define stat _stat +# ifndef _INTPTR_T_DEFINED +# define intptr_t int +# endif +#endif + +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# define FOPEN_WB "wb" +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#ifdef __CYGWIN__ +# define FOPEN_WB "wb" +#endif + +#ifndef FOPEN_WB +# define FOPEN_WB "w" +#endif +#ifndef _O_BINARY +# define _O_BINARY 0 +#endif + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +#undef LTWRAPPER_DEBUGPRINTF +#if defined DEBUGWRAPPER +# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args +static void +ltwrapper_debugprintf (const char *fmt, ...) +{ + va_list args; + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); +} +#else +# define LTWRAPPER_DEBUGPRINTF(args) +#endif + +const char *program_name = NULL; + +void *xmalloc (size_t num); +char *xstrdup (const char *string); +const char *base_name (const char *name); +char *find_executable (const char *wrapper); +char *chase_symlinks (const char *pathspec); +int make_executable (const char *path); +int check_executable (const char *path); +char *strendzap (char *str, const char *pat); +void lt_fatal (const char *message, ...); +void lt_setenv (const char *name, const char *value); +char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_opt_process_env_set (const char *arg); +void lt_opt_process_env_prepend (const char *arg); +void lt_opt_process_env_append (const char *arg); +int lt_split_name_value (const char *arg, char** name, char** value); +void lt_update_exe_path (const char *name, const char *value); +void lt_update_lib_path (const char *name, const char *value); + +static const char *script_text_part1 = +EOF + + func_emit_wrapper_part1 yes | + $SED -e 's/\([\\"]\)/\\\1/g' \ + -e 's/^/ "/' -e 's/$/\\n"/' + echo ";" + cat <"))); + for (i = 0; i < newargc; i++) + { + LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : ""))); + } + +EOF + + case $host_os in + mingw*) + cat <<"EOF" + /* execv doesn't actually work on mingw as expected on unix */ + rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); + if (rval == -1) + { + /* failed to start process */ + LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno)); + return 127; + } + return rval; +EOF + ;; + *) + cat <<"EOF" + execv (lt_argv_zero, newargz); + return rval; /* =127, but avoids unused variable warning */ +EOF + ;; + esac + + cat <<"EOF" +} + +void * +xmalloc (size_t num) +{ + void *p = (void *) malloc (num); + if (!p) + lt_fatal ("Memory exhausted"); + + return p; +} + +char * +xstrdup (const char *string) +{ + return string ? strcpy ((char *) xmalloc (strlen (string) + 1), + string) : NULL; +} + +const char * +base_name (const char *name) +{ + const char *base; + +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + /* Skip over the disk name in MSDOS pathnames. */ + if (isalpha ((unsigned char) name[0]) && name[1] == ':') + name += 2; +#endif + + for (base = name; *name; name++) + if (IS_DIR_SEPARATOR (*name)) + base = name + 1; + return base; +} + +int +check_executable (const char *path) +{ + struct stat st; + + LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", + path ? (*path ? path : "EMPTY!") : "NULL!")); + if ((!path) || (!*path)) + return 0; + + if ((stat (path, &st) >= 0) + && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) + return 1; + else + return 0; +} + +int +make_executable (const char *path) +{ + int rval = 0; + struct stat st; + + LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", + path ? (*path ? path : "EMPTY!") : "NULL!")); + if ((!path) || (!*path)) + return 0; + + if (stat (path, &st) >= 0) + { + rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); + } + return rval; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise + Does not chase symlinks, even on platforms that support them. +*/ +char * +find_executable (const char *wrapper) +{ + int has_slash = 0; + const char *p; + const char *p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char *concat_name; + + LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", + wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char *path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char *q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR (*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = + XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + return NULL; +} + +char * +chase_symlinks (const char *pathspec) +{ +#ifndef S_ISLNK + return xstrdup (pathspec); +#else + char buf[LT_PATHMAX]; + struct stat s; + char *tmp_pathspec = xstrdup (pathspec); + char *p; + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { + LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", + tmp_pathspec)); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) + { + has_symlinks = 1; + break; + } + + /* search backwards for last DIR_SEPARATOR */ + p = tmp_pathspec + strlen (tmp_pathspec) - 1; + while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + p--; + if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + { + /* no more DIR_SEPARATORS left */ + break; + } + *p = '\0'; + } + else + { + char *errstr = strerror (errno); + lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); + } + } + XFREE (tmp_pathspec); + + if (!has_symlinks) + { + return xstrdup (pathspec); + } + + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { + lt_fatal ("Could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); +#endif +} + +char * +strendzap (char *str, const char *pat) +{ + size_t len, patlen; + + assert (str != NULL); + assert (pat != NULL); + + len = strlen (str); + patlen = strlen (pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp (str, pat) == 0) + *str = '\0'; + } + return str; +} + +static void +lt_error_core (int exit_status, const char *mode, + const char *message, va_list ap) +{ + fprintf (stderr, "%s: %s: ", program_name, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); + va_end (ap); +} + +void +lt_setenv (const char *name, const char *value) +{ + LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n", + (name ? name : ""), + (value ? value : ""))); + { +#ifdef HAVE_SETENV + /* always make a copy, for consistency with !HAVE_SETENV */ + char *str = xstrdup (value); + setenv (name, str, 1); +#else + int len = strlen (name) + 1 + strlen (value) + 1; + char *str = XMALLOC (char, len); + sprintf (str, "%s=%s", name, value); + if (putenv (str) != EXIT_SUCCESS) + { + XFREE (str); + } +#endif + } +} + +char * +lt_extend_str (const char *orig_value, const char *add, int to_end) +{ + char *new_value; + if (orig_value && *orig_value) + { + int orig_value_len = strlen (orig_value); + int add_len = strlen (add); + new_value = XMALLOC (char, add_len + orig_value_len + 1); + if (to_end) + { + strcpy (new_value, orig_value); + strcpy (new_value + orig_value_len, add); + } + else + { + strcpy (new_value, add); + strcpy (new_value + add_len, orig_value); + } + } + else + { + new_value = xstrdup (add); + } + return new_value; +} + +int +lt_split_name_value (const char *arg, char** name, char** value) +{ + const char *p; + int len; + if (!arg || !*arg) + return 1; + + p = strchr (arg, (int)'='); + + if (!p) + return 1; + + *value = xstrdup (++p); + + len = strlen (arg) - strlen (*value); + *name = XMALLOC (char, len); + strncpy (*name, arg, len-1); + (*name)[len - 1] = '\0'; + + return 0; +} + +void +lt_opt_process_env_set (const char *arg) +{ + char *name = NULL; + char *value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg); + } + + lt_setenv (name, value); + XFREE (name); + XFREE (value); +} + +void +lt_opt_process_env_prepend (const char *arg) +{ + char *name = NULL; + char *value = NULL; + char *new_value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg); + } + + new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + XFREE (name); + XFREE (value); +} + +void +lt_opt_process_env_append (const char *arg) +{ + char *name = NULL; + char *value = NULL; + char *new_value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg); + } + + new_value = lt_extend_str (getenv (name), value, 1); + lt_setenv (name, new_value); + XFREE (new_value); + XFREE (name); + XFREE (value); +} + +void +lt_update_exe_path (const char *name, const char *value) +{ + LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + (name ? name : ""), + (value ? value : ""))); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + /* some systems can't cope with a ':'-terminated path #' */ + int len = strlen (new_value); + while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) + { + new_value[len-1] = '\0'; + } + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +void +lt_update_lib_path (const char *name, const char *value) +{ + LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + (name ? name : ""), + (value ? value : ""))); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + } +} + + +EOF +} +# end: func_emit_cwrapperexe_src + +# func_mode_link arg... +func_mode_link () +{ + $opt_debug case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra - # flag for every libtool invokation. + # flag for every libtool invocation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying @@ -754,9 +4051,10 @@ compiler." allow_undefined=yes ;; esac - libtool_args="$nonopt" - compile_command="$nonopt" - finalize_command="$nonopt" + libtool_args=$nonopt + base_compile="$nonopt $@" + compile_command=$nonopt + finalize_command=$nonopt compile_rpath= finalize_rpath= @@ -770,6 +4068,8 @@ compiler." linker_flags= dllsearchpath= lib_search_path=`pwd` + inst_prefix_dir= + new_inherited_linker_flags= avoid_version=no dlfiles= @@ -784,6 +4084,8 @@ compiler." module=no no_install=no objs= + non_pic_objects= + precious_files_regex= prefer_static_libs=no preload=no prev= @@ -795,27 +4097,47 @@ compiler." temp_rpath= thread_safe=no vinfo= + vinfo_number=no + weak_libs= + single_module="${wl}-single_module" + func_infer_tag $base_compile # We need to know -static, to get the right output filenames. for arg do case $arg in - -all-static | -static) - if test "X$arg" = "X-all-static"; then + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + break + ;; + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then - $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 + func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi - else + prefer_static_libs=yes + ;; + -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi - fi + prefer_static_libs=built + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac build_libtool_libs=no build_old_libs=yes - prefer_static_libs=yes break ;; esac @@ -825,23 +4147,19 @@ compiler." test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. - while test $# -gt 0; do + while test "$#" -gt 0; do arg="$1" shift - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test - ;; - *) qarg=$arg ;; - esac - libtool_args="$libtool_args $qarg" + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) - compile_command="$compile_command @OUTPUT@" - finalize_command="$finalize_command @OUTPUT@" + func_append compile_command " @OUTPUT@" + func_append finalize_command " @OUTPUT@" ;; esac @@ -849,8 +4167,8 @@ compiler." dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. - compile_command="$compile_command @SYMFILE@" - finalize_command="$finalize_command @SYMFILE@" + func_append compile_command " @SYMFILE@" + func_append finalize_command " @SYMFILE@" preload=yes fi case $arg in @@ -888,10 +4206,8 @@ compiler." ;; expsyms) export_symbols="$arg" - if test ! -f "$arg"; then - $echo "$modename: symbol file \`$arg' does not exist" - exit 1 - fi + test -f "$arg" \ + || func_fatal_error "symbol file \`$arg' does not exist" prev= continue ;; @@ -900,6 +4216,125 @@ compiler." prev= continue ;; + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) deplibs="$deplibs $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat "$save_arg"` + do +# moreargs="$moreargs $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + done + else + func_fatal_error "link input file \`$arg' does not exist" + fi + arg=$save_arg + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; release) release="-$arg" prev= @@ -910,8 +4345,7 @@ compiler." case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit 1 + func_fatal_error "only absolute run-paths are allowed" ;; esac if test "$prev" = rpath; then @@ -928,19 +4362,37 @@ compiler." prev= continue ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + weak) + weak_libs="$weak_libs $arg" + prev= + continue + ;; + xcclinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; xcompiler) compiler_flags="$compiler_flags $qarg" prev= - compile_command="$compile_command $qarg" - finalize_command="$finalize_command $qarg" + func_append compile_command " $qarg" + func_append finalize_command " $qarg" continue ;; xlinker) linker_flags="$linker_flags $qarg" compiler_flags="$compiler_flags $wl$qarg" prev= - compile_command="$compile_command $wl$qarg" - finalize_command="$finalize_command $wl$qarg" + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" continue ;; *) @@ -949,23 +4401,23 @@ compiler." continue ;; esac - fi # test -n $prev + fi # test -n "$prev" prevarg="$arg" case $arg in -all-static) if test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" + # See comment for -static flag below, for more details. + func_append compile_command " $link_static_flag" + func_append finalize_command " $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. - $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 - continue + func_fatal_error "\`-allow-undefined' must not be used because it is the default" ;; -avoid-version) @@ -990,8 +4442,7 @@ compiler." -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: more than one -exported-symbols argument is not allowed" - exit 1 + func_fatal_error "more than one -exported-symbols argument is not allowed" fi if test "X$arg" = "X-export-symbols"; then prev=expsyms @@ -1001,29 +4452,45 @@ compiler." continue ;; + -framework) + prev=framework + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in - no/*-*-irix* | no/*-*-nonstopux*) - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" + no/*-*-irix* | /*-*-irix*) + func_append compile_command " $arg" + func_append finalize_command " $arg" ;; esac continue ;; -L*) - dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` + func_stripname '-L' '' "$arg" + dir=$func_stripname_result + if test -z "$dir"; then + if test "$#" -gt 0; then + func_fatal_error "require no space between \`-L' and \`$1'" + else + func_fatal_error "need path for \`-L' option" + fi + fi # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 - exit 1 - fi + test -z "$absdir" && \ + func_fatal_error "cannot determine absolute directory name of \`$dir'" dir="$absdir" ;; esac @@ -1035,11 +4502,18 @@ compiler." ;; esac case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; + ::) dllsearchpath=$dir;; *) dllsearchpath="$dllsearchpath:$dir";; esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac ;; esac continue @@ -1048,26 +4522,39 @@ compiler." -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in - *-*-cygwin* | *-*-pw32* | *-*-beos*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*) # These systems don't actually have a C or math library (as such) continue ;; - *-*-mingw* | *-*-os2*) + *-*-os2*) # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; - *-*-openbsd* | *-*-freebsd*) + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; - esac - elif test "X$arg" = "X-lc_r"; then - case $host in - *-*-openbsd* | *-*-freebsd4*) - # Do not include libc_r directly, use -pthread flag. + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + deplibs="$deplibs System.ltframework" continue ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac fi deplibs="$deplibs $arg" continue @@ -1075,15 +4562,36 @@ compiler." -module) module=yes - case $host in - *-*-freebsd*) - # Do not build the useless static library - build_old_libs=no - ;; + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + # Darwin uses the -arch flag to determine output architecture. + -model|-arch|-isysroot) + compiler_flags="$compiler_flags $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + compiler_flags="$compiler_flags $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; esac continue ;; + -multi_module) + single_module="${wl}-multi_module" + continue + ;; + -no-fast-install) fast_install=no continue @@ -1091,11 +4599,11 @@ compiler." -no-install) case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) # The PATH hackery in wrapper scripts is required on Windows - # in order for the loader to find any dlls it needs. - $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 - $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 + # and Darwin in order for the loader to find any dlls it needs. + func_warning "\`-no-install' is ignored for $host" + func_warning "assuming \`-no-fast-install' instead" fast_install=no ;; *) no_install=yes ;; @@ -1108,8 +4616,18 @@ compiler." continue ;; + -objectlist) + prev=objectlist + continue + ;; + -o) prev=output ;; + -precious-files-regex) + prev=precious_regex + continue + ;; + -release) prev=release continue @@ -1126,13 +4644,13 @@ compiler." ;; -R*) - dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` + func_stripname '-R' '' "$arg" + dir=$func_stripname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit 1 + func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in @@ -1142,7 +4660,17 @@ compiler." continue ;; - -static) + -shared) + # The effects of -shared are defined in a previous loop. + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects @@ -1161,41 +4689,48 @@ compiler." continue ;; + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -weak) + prev=weak + continue + ;; + -Wc,*) - args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" - case $flag in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - flag="\"$flag\"" - ;; - esac - arg="$arg $wl$flag" - compiler_flags="$compiler_flags $flag" + func_quote_for_eval "$flag" + arg="$arg $wl$func_quote_for_eval_result" + compiler_flags="$compiler_flags $func_quote_for_eval_result" done IFS="$save_ifs" - arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + func_stripname ' ' '' "$arg" + arg=$func_stripname_result ;; -Wl,*) - args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" - case $flag in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - flag="\"$flag\"" - ;; - esac - arg="$arg $wl$flag" - compiler_flags="$compiler_flags $wl$flag" - linker_flags="$linker_flags $flag" + func_quote_for_eval "$flag" + arg="$arg $wl$func_quote_for_eval_result" + compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" + linker_flags="$linker_flags $func_quote_for_eval_result" done IFS="$save_ifs" - arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + func_stripname ' ' '' "$arg" + arg=$func_stripname_result ;; -Xcompiler) @@ -1208,41 +4743,128 @@ compiler." continue ;; + -XCClinker) + prev=xcclinker + continue + ;; + + # -msg_* for osf cc + -msg_*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + # -64, -mips[0-9] enable 64-bit mode on the SGI compiler + # -r[0-9][0-9]* specifies the processor on the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler + # +DA*, +DD* enable 64-bit mode on the HP compiler + # -q* pass through compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* pass through architecture-specific + # compiler args for GCC + # -F/path gives path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC + # @file GCC response files + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + func_append compile_command " $arg" + func_append finalize_command " $arg" + compiler_flags="$compiler_flags $arg" + continue + ;; + # Some other compiler flag. -* | +*) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" ;; - *.lo | *.$objext) - # A library or standard object. - if test "$prev" = dlfiles; then - # This file was specified with -dlopen. - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $arg" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles + *.$objext) + # A standard object. + objs="$objs $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" fi - fi - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` - prev= + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi else - case $arg in - *.lo) libobjs="$libobjs $arg" ;; - *) objs="$objs $arg" ;; - esac + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi fi ;; @@ -1274,69 +4896,51 @@ compiler." *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" fi done # argument parsing loop - if test -n "$prev"; then - $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi + test -n "$prev" && \ + func_fatal_help "the \`$prevarg' option requires an argument" if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" fi + oldlibs= # calculate the name of the file, without its directory - outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` + func_basename "$output" + outputname="$func_basename_result" libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi + func_dirname "$output" "/" "" + output_objdir="$func_dirname_result$objdir" # Create the object directory. - if test ! -d $output_objdir; then - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - status=$? - if test $status -ne 0 && test ! -d $output_objdir; then - exit $status - fi - fi + func_mkdir_p "$output_objdir" # Determine the type of output case $output in "") - $echo "$modename: you must specify an output file" 1>&2 - $echo "$help" 1>&2 - exit 1 + func_fatal_help "you must specify an output file" ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; @@ -1345,32 +4949,52 @@ compiler." esac specialdeplibs= + libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do - if test "X$duplicate_deps" = "Xyes" ; then + if $opt_duplicate_deps ; then case "$libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi libs="$libs $deplib" done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if $opt_duplicate_compiler_generated_deps; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; + esac + pre_post_deps="$pre_post_deps $pre_post_dep" + done + fi + pre_post_deps= + fi + deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries notinst_path= # paths that contain not-installed libtool libraries + case $linkmode in lib) - passes="conv link" + passes="conv dlpreopen link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) - $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 - exit 1 + func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" ;; esac done @@ -1386,40 +5010,106 @@ compiler." *) passes="conv" ;; esac + for pass in $passes; do - if test $linkmode = prog; then - # Determine which files to process + # The preopen pass in lib mode reverses $deplibs; put it back here + # so that -L comes before libs that need it for instance... + if test "$linkmode,$pass" = "lib,link"; then + ## FIXME: Find the place where the list is rebuilt in the wrong + ## order, and fix it there properly + tmp_deplibs= + for deplib in $deplibs; do + tmp_deplibs="$deplib $tmp_deplibs" + done + deplibs="$tmp_deplibs" + fi + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then case $pass in - dlopen) - libs="$dlfiles" - save_deplibs="$deplibs" # Collect dlpreopened libraries - deplibs= - ;; + dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; - link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + link) + libs="$deplibs %DEPLIBS%" + test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" + ;; esac fi + if test "$linkmode,$pass" = "lib,dlpreopen"; then + # Collect and forward deplibs of preopened libtool libs + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= + case $lib in + *.la) func_source "$lib" ;; + esac + + # Collect preopened libtool deplibs, except any this library + # has declared as weak libs + for deplib in $dependency_libs; do + deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` + case " $weak_libs " in + *" $deplib_base "*) ;; + *) deplibs="$deplibs $deplib" ;; + esac + done + done + libs="$dlprefiles" + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + for deplib in $libs; do lib= found=no case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + compiler_flags="$compiler_flags $deplib" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; + esac + fi + fi + continue + ;; -l*) - if test $linkmode = oldlib && test $linkmode = obj; then - $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2 + if test "$linkmode" != lib && test "$linkmode" != prog; then + func_warning "\`-l' is ignored for archives/objects" continue fi - if test $pass = conv; then - deplibs="$deplib $deplibs" - continue + func_stripname '-l' '' "$deplib" + name=$func_stripname_result + if test "$linkmode" = lib; then + searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" + else + searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" fi - name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` - for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do - # Search the libtool library - lib="$searchdir/lib${name}.la" - if test -f "$lib"; then - found=yes - break - fi + for searchdir in $searchdirs; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done done if test "$found" != yes; then # deplib doesn't seem to be a libtool library @@ -1428,41 +5118,91 @@ compiler." finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" - test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if func_lalib_p "$lib"; then + library_names= + old_library= + func_source "$lib" + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi fi ;; # -l + *.ltframework) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; + esac + fi + fi + continue + ;; -L*) case $linkmode in lib) deplibs="$deplib $deplibs" - test $pass = conv && continue + test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" ;; prog) - if test $pass = conv; then + if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi - if test $pass = scan; then + if test "$pass" = scan; then deplibs="$deplib $deplibs" - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi + func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" ;; *) - $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2 + func_warning "\`-L' is ignored for archives/objects" ;; esac # linkmode continue ;; # -L -R*) - if test $pass = link; then - dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` + if test "$pass" = link; then + func_stripname '-R' '' "$deplib" + dir=$func_stripname_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; @@ -1474,30 +5214,51 @@ compiler." ;; *.la) lib="$deplib" ;; *.$libext) - if test $pass = conv; then + if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) - if test "$deplibs_check_method" != pass_all; then - echo - echo "*** Warning: Trying to link with static lib archive $deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because the file extensions .$libext of this argument makes me believe" - echo "*** that it is just a static archive that I should not used here." - else - echo - echo "*** Warning: Linking the shared library $output against the" - echo "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" - fi + # Linking convenience modules into shared libraries is allowed, + # but linking other static libraries is non-portable. + case " $dlpreconveniencelibs " in + *" $deplib "*) ;; + *) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + $ECHO + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because the file extensions .$libext of this argument makes me believe" + $ECHO "*** that it is just a static archive that I should not use here." + else + $ECHO + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + ;; + esac continue ;; prog) - if test $pass != link; then + if test "$pass" != link; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" @@ -1508,14 +5269,18 @@ compiler." esac # linkmode ;; # *.$libext *.lo | *.$objext) - if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlopen support or we're linking statically, - # we need to preload. - newdlprefiles="$newdlprefiles $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - newdlfiles="$newdlfiles $deplib" + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi fi continue ;; @@ -1524,21 +5289,18 @@ compiler." continue ;; esac # case $deplib - if test $found = yes || test -f "$lib"; then : + + if test "$found" = yes || test -f "$lib"; then : else - $echo "$modename: cannot find the library \`$lib'" 1>&2 - exit 1 + func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" fi # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit 1 - fi + func_lalib_unsafe_p "$lib" \ + || func_fatal_error "\`$lib' is not a valid libtool archive" - ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` - test "X$ladir" = "X$lib" && ladir="." + func_dirname "$lib" "" "." + ladir="$func_dirname_result" dlname= dlopen= @@ -1546,31 +5308,41 @@ compiler." libdir= library_names= old_library= + inherited_linker_flags= # If the library was installed with an old release of libtool, - # it will not redefine variable installed. + # it will not redefine variables installed, or shouldnotlink installed=yes + shouldnotlink=no + avoidtemprpath= - # Read the .la file - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac + # Read the .la file + func_source "$lib" + + # Convert "-framework foo" to "foo.ltframework" + if test -n "$inherited_linker_flags"; then + tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; + *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; + esac + done + fi + dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || - { test $linkmode = oldlib && test $linkmode = obj; }; then - # Add dl[pre]opened files of deplib + { test "$linkmode" != prog && test "$linkmode" != lib; }; then test -n "$dlopen" && dlfiles="$dlfiles $dlopen" test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" fi - if test $pass = conv; then + if test "$pass" = conv; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then - $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit 1 + func_fatal_error "cannot find name of link library for \`$lib'" fi # It is a libtool convenience library, so add in its objects. convenience="$convenience $ladir/$objdir/$old_library" @@ -1578,40 +5350,42 @@ compiler." tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi + if $opt_duplicate_deps ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi tmp_libs="$tmp_libs $deplib" done - elif test $linkmode != prog && test $linkmode != lib; then - $echo "$modename: \`$lib' is not a convenience library" 1>&2 - exit 1 + elif test "$linkmode" != prog && test "$linkmode" != lib; then + func_fatal_error "\`$lib' is not a convenience library" fi continue fi # $pass = conv + # Get the name of the library we link against. linklib= for l in $old_library $library_names; do linklib="$l" done if test -z "$linklib"; then - $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit 1 + func_fatal_error "cannot find name of link library for \`$lib'" fi # This library was specified with -dlopen. - if test $pass = dlopen; then + if test "$pass" = dlopen; then if test -z "$libdir"; then - $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 - exit 1 + func_fatal_error "cannot -dlopen a convenience library: \`$lib'" fi - if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking - # statically, we need to preload. - dlprefiles="$dlprefiles $lib" + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + dlprefiles="$dlprefiles $lib $dependency_libs" else newdlfiles="$newdlfiles $lib" fi @@ -1624,18 +5398,19 @@ compiler." *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 + func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "passing it literally to the linker, although it might fail" abs_ladir="$ladir" fi ;; esac - laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + func_basename "$lib" + laname="$func_basename_result" # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - $echo "$modename: warning: library \`$lib' was moved." 1>&2 + func_warning "library \`$lib' was moved." dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" @@ -1643,24 +5418,36 @@ compiler." dir="$libdir" absdir="$libdir" fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi fi # $installed = yes - name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + func_stripname 'lib' '.la' "$laname" + name=$func_stripname_result # This library was specified with -dlpreopen. - if test $pass = dlpreopen; then - if test -z "$libdir"; then - $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 - exit 1 + if test "$pass" = dlpreopen; then + if test -z "$libdir" && test "$linkmode" = prog; then + func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" fi # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then newdlprefiles="$newdlprefiles $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then newdlprefiles="$newdlprefiles $dir/$dlname" @@ -1671,18 +5458,19 @@ compiler." if test -z "$libdir"; then # Link the convenience library - if test $linkmode = lib; then + if test "$linkmode" = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else - deplibs="$lib $deplibs" + deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi - if test $linkmode = prog && test $pass != link; then + + if test "$linkmode" = prog && test "$pass" != link; then newlib_search_path="$newlib_search_path $ladir" deplibs="$lib $deplibs" @@ -1695,17 +5483,19 @@ compiler." tmp_libs= for deplib in $dependency_libs; do case $deplib in - -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test + -L*) func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" + ;; esac # Need to link against all dependency_libs? - if test $linkalldeplibs = yes; then + if test "$linkalldeplibs" = yes; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi - if test "X$duplicate_deps" = "Xyes" ; then + if $opt_duplicate_deps ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac @@ -1715,13 +5505,20 @@ compiler." continue fi # $linkmode = prog... - link_static=no # Whether the deplib will be linked statically - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then - # Link against this shared library + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { { test "$prefer_static_libs" = no || + test "$prefer_static_libs,$installed" = "built,yes"; } || + test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath:" in + *"$absdir:"*) ;; + *) temp_rpath="$temp_rpath$absdir:" ;; + esac + fi - if test "$linkmode,$pass" = "prog,link" || - { test $linkmode = lib && test $hardcode_into_libs = yes; }; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. @@ -1743,17 +5540,6 @@ compiler." esac ;; esac - if test $linkmode = prog; then - # We need to hardcode the library path - if test -n "$shlibpath_var"; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *" $absdir "*) ;; - *) temp_rpath="$temp_rpath $dir" ;; - esac - fi - fi fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && @@ -1763,26 +5549,89 @@ compiler." # We only need to search for static libraries continue fi + fi - if test "$installed" = no; then - notinst_deplibs="$notinst_deplibs $lib" - need_relink=yes + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes; then + use_static_libs=no + fi + if test -n "$library_names" && + { test "$use_static_libs" = no || test -z "$old_library"; }; then + case $host in + *cygwin* | *mingw* | *cegcc*) + # No point in relinking DLLs because paths are not encoded + notinst_deplibs="$notinst_deplibs $lib" + need_relink=no + ;; + *) + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi + ;; + esac + # This is a shared library + + # Warn about portability, can't link against -module's on some + # systems (darwin). Don't bleat about dlopened modules though! + dlopenmodule="" + for dlpremoduletest in $dlprefiles; do + if test "X$dlpremoduletest" = "X$lib"; then + dlopenmodule="$dlpremoduletest" + break + fi + done + if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + $ECHO + if test "$linkmode" = prog; then + $ECHO "*** Warning: Linking the executable $output against the loadable module" + else + $ECHO "*** Warning: Linking the shared library $output against the loadable module" + fi + $ECHO "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names - realname="$2" - shift; shift - libname=`eval \\$echo \"$libname_spec\"` + shift + realname="$1" + shift + libname=`eval "\\$ECHO \"$libname_spec\""` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in - *cygwin*) - major=`expr $current - $age` + *cygwin* | mingw* | *cegcc*) + func_arith $current - $age + major=$func_arith_result versuffix="-$major" ;; esac @@ -1793,41 +5642,29 @@ compiler." # Make a new name for the extract_expsyms_cmds to use soroot="$soname" - soname=`echo $soroot | ${SED} -e 's/^.*\///'` - newlib="libimp-`echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" + func_basename "$soroot" + soname="$func_basename_result" + func_stripname 'lib' '.dll' "$soname" + newlib=libimp-$func_stripname_result.a # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else - $show "extracting exported symbol list from \`$soname'" - save_ifs="$IFS"; IFS='~' - eval cmds=\"$extract_expsyms_cmds\" - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + func_verbose "extracting exported symbol list from \`$soname'" + func_execute_cmds "$extract_expsyms_cmds" 'exit $?' fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else - $show "generating import library for \`$soname'" - save_ifs="$IFS"; IFS='~' - eval cmds=\"$old_archive_from_expsyms_cmds\" - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + func_verbose "generating import library for \`$soname'" + func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib - fi # test -n $old_archive_from_expsyms_cmds + fi # test -n "$old_archive_from_expsyms_cmds" - if test $linkmode = prog || test "$mode" != relink; then + if test "$linkmode" = prog || test "$mode" != relink; then add_shlibpath= add_dir= add= @@ -1836,6 +5673,30 @@ compiler." immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" + case $host in + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a (non-dlopened) module then we can not + # link against it, someone is ignoring the earlier warnings + if /usr/bin/file -L $add 2> /dev/null | + $GREP ": [^:]* bundle" >/dev/null ; then + if test "X$dlopenmodule" != "X$lib"; then + $ECHO "*** Warning: lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + $ECHO + $ECHO "*** And there doesn't seem to be a static archive available" + $ECHO "*** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + elif test -n "$old_library"; then + add="$dir/$old_library" + fi + fi + esac elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; @@ -1850,10 +5711,19 @@ compiler." fi ;; relink) - if test "$hardcode_direct" = yes; then + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$dir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" @@ -1866,8 +5736,7 @@ compiler." esac if test "$lib_linked" != yes; then - $echo "$modename: configuration error: unsupported hardcode properties" - exit 1 + func_fatal_configuration "unsupported hardcode properties" fi if test -n "$add_shlibpath"; then @@ -1876,14 +5745,14 @@ compiler." *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; esac fi - if test $linkmode = prog; then + if test "$linkmode" = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" - if test "$hardcode_direct" != yes && \ - test "$hardcode_minus_L" != yes && \ + if test "$hardcode_direct" != yes && + test "$hardcode_minus_L" != yes && test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; @@ -1893,12 +5762,13 @@ compiler." fi fi - if test $linkmode = prog || test "$mode" = relink; then + if test "$linkmode" = prog || test "$mode" = relink; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes; then + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" @@ -1909,13 +5779,28 @@ compiler." *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi add="-l$name" fi - if test $linkmode = prog; then + if test "$linkmode" = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else @@ -1923,16 +5808,7 @@ compiler." test -n "$add" && deplibs="$add $deplibs" fi fi - elif test $linkmode = prog; then - if test "$alldeplibs" = yes && - { test "$deplibs_check_method" = pass_all || - { test "$build_libtool_libs" = yes && - test -n "$library_names"; }; }; then - # We only need to search for static libraries - continue - fi - - # Try to link the static library + elif test "$linkmode" = prog; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. @@ -1952,21 +5828,21 @@ compiler." # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. - echo - echo "*** Warning: This system can not link to static lib archive $lib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + $ECHO + $ECHO "*** Warning: This system can not link to static lib archive $lib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then - echo "*** But as you try to build a module library, libtool will still create " - echo "*** a static module, that should work as long as the dlopening application" - echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + $ECHO "*** But as you try to build a module library, libtool will still create " + $ECHO "*** a static module, that should work as long as the dlopening application" + $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + $ECHO + $ECHO "*** However, this would only work if libtool was able to extract symbol" + $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" + $ECHO "*** not find such a program. So, this module is probably useless." + $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module @@ -1976,22 +5852,22 @@ compiler." fi fi else - convenience="$convenience $dir/$old_library" - old_convenience="$old_convenience $dir/$old_library" deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? - if test $linkmode = lib; then + if test "$linkmode" = lib; then if test -n "$dependency_libs" && - { test $hardcode_into_libs != yes || test $build_old_libs = yes || - test $link_static = yes; }; then + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in - -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` + -R*) func_stripname '-R' '' "$libdir" + temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; *) xrpath="$xrpath $temp_xrpath";; @@ -2009,7 +5885,7 @@ compiler." tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" - if test "X$duplicate_deps" = "Xyes" ; then + if $opt_duplicate_deps ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac @@ -2017,58 +5893,87 @@ compiler." tmp_libs="$tmp_libs $deplib" done - if test $link_all_deplibs != no; then + if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do + path= case $deplib in -L*) path="$deplib" ;; *.la) - dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$deplib" && dir="." + func_dirname "$deplib" "" "." + dir="$func_dirname_result" # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 + func_warning "cannot determine absolute directory name of \`$dir'" absdir="$dir" fi ;; esac - if grep "^installed=no" $deplib > /dev/null; then + if $GREP "^installed=no" $deplib > /dev/null; then + case $host in + *-*-darwin*) + depdepl= + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$absdir/$objdir/$depdepl" ; then + depdepl="$absdir/$objdir/$depdepl" + darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -z "$darwin_install_name"; then + darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + fi + compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" + path= + fi + fi + ;; + *) path="-L$absdir/$objdir" + ;; + esac else eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -z "$libdir"; then - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit 1 - fi - if test "$absdir" != "$libdir"; then - $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 - fi + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + test "$absdir" != "$libdir" && \ + func_warning "\`$deplib' seems to be moved" + path="-L$absdir" fi ;; - *) continue ;; esac case " $deplibs " in *" $path "*) ;; - *) deplibs="$deplibs $path" ;; + *) deplibs="$path $deplibs" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs - if test $pass = dlpreopen; then + if test "$pass" = link; then + if test "$linkmode" = "prog"; then + compile_deplibs="$new_inherited_linker_flags $compile_deplibs" + finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" + else + compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + fi + fi + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi - if test $pass != dlopen; then - test $pass != scan && dependency_libs="$newdependency_libs" - if test $pass != conv; then + if test "$pass" != dlopen; then + if test "$pass" != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do @@ -2090,9 +5995,30 @@ compiler." eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) @@ -2120,42 +6046,53 @@ compiler." eval $var=\"$tmp_libs\" done # for var fi - if test "$pass" = "conv" && - { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then - libs="$deplibs" # reset libs - deplibs= - fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + tmp_libs="$tmp_libs $i" + fi + done + dependency_libs=$tmp_libs done # for pass - if test $linkmode = prog; then + if test "$linkmode" = prog; then dlfiles="$newdlfiles" + fi + if test "$linkmode" = prog || test "$linkmode" = lib; then dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 + func_warning "\`-dlopen' is ignored for archives" fi - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 - fi + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for archives" ;; + esac - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 - fi + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for archives" - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 - fi + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for archives" - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 - fi + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for archives" - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 - fi + test -n "$release" && \ + func_warning "\`-release' is ignored for archives" + + test -n "$export_symbols$export_symbols_regex" && \ + func_warning "\`-export-symbols' is ignored for archives" # Now set the variables for building old libraries. build_libtool_libs=no @@ -2167,113 +6104,152 @@ compiler." # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) - if test "$module" = no; then - $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi + test "$module" = no && \ + func_fatal_help "libtool library \`$output' must begin with \`lib'" + if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + func_stripname '' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else - libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then - $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 - exit 1 + func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" else - echo - echo "*** Warning: Linking the shared library $output against the non-libtool" - echo "*** objects $objs is not portable!" + $ECHO + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" libobjs="$libobjs $objs" fi fi - if test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 - fi + test "$dlself" != no && \ + func_warning "\`-dlopen self' is ignored for libtool libraries" set dummy $rpath - if test $# -gt 2; then - $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 - fi - install_libdir="$2" + shift + test "$#" -gt 1 && \ + func_warning "ignoring multiple \`-rpath's for a libtool library" + + install_libdir="$1" oldlibs= if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. - libext=al + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 - fi + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for convenience libraries" - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 - fi + test -n "$release" && \ + func_warning "\`-release' is ignored for convenience libraries" else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 + shift IFS="$save_ifs" - if test -n "$8"; then - $echo "$modename: too many parameters to \`-version-info'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - current="$2" - revision="$3" - age="$4" + test -n "$7" && \ + func_fatal_help "too many parameters to \`-version-info'" + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$1" + number_minor="$2" + number_revision="$3" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + darwin|linux|osf|windows|none) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_minor" + lt_irix_increment=no + ;; + *) + func_fatal_configuration "$modename: unknown library version type \`$version_type'" + ;; + esac + ;; + no) + current="$1" + revision="$2" + age="$3" + ;; + esac # Check that each of the things are valid numbers. case $current in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 + func_error "CURRENT \`$current' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $revision in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 + func_error "REVISION \`$revision' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $age in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 + func_error "AGE \`$age' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" ;; esac - if test $age -gt $current; then - $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 + if test "$age" -gt "$current"; then + func_error "AGE \`$age' is greater than the current interface number \`$current'" + func_fatal_error "\`$vinfo' is not valid version information" fi # Calculate the version variables. @@ -2286,10 +6262,13 @@ compiler." darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header - major=.`expr $current - $age` + func_arith $current - $age + major=.$func_arith_result versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... - minor_current=`expr $current + 1` + func_arith $current + 1 + minor_current=$func_arith_result + xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; @@ -2300,11 +6279,16 @@ compiler." freebsd-elf) major=".$current" - versuffix=".$current"; + versuffix=".$current" ;; irix | nonstopux) - major=`expr $current - $age + 1` + if test "X$lt_irix_increment" = "Xno"; then + func_arith $current - $age + else + func_arith $current - $age + 1 + fi + major=$func_arith_result case $version_type in nonstopux) verstring_prefix=nonstopux ;; @@ -2314,9 +6298,11 @@ compiler." # Add in all the interfaces that we are compatible with. loop=$revision - while test $loop != 0; do - iface=`expr $revision - $loop` - loop=`expr $loop - 1` + while test "$loop" -ne 0; do + func_arith $revision - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result verstring="$verstring_prefix$major.$iface:$verstring" done @@ -2326,20 +6312,24 @@ compiler." ;; linux) - major=.`expr $current - $age` + func_arith $current - $age + major=.$func_arith_result versuffix="$major.$age.$revision" ;; osf) - major=.`expr $current - $age` + func_arith $current - $age + major=.$func_arith_result versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age - while test $loop != 0; do - iface=`expr $current - $loop` - loop=`expr $loop - 1` + while test "$loop" -ne 0; do + func_arith $current - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result verstring="$verstring:${iface}.0" done @@ -2347,6 +6337,11 @@ compiler." verstring="$verstring:${current}.0" ;; + qnx) + major=".$current" + versuffix=".$current" + ;; + sunos) major=".$current" versuffix=".$current.$revision" @@ -2355,26 +6350,24 @@ compiler." windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. - major=`expr $current - $age` + func_arith $current - $age + major=$func_arith_result versuffix="-$major" ;; *) - $echo "$modename: unknown library version type \`$version_type'" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 + func_fatal_configuration "unknown library version type \`$version_type'" ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= - verstring="0.0" case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely - verstring="" + verstring= ;; *) verstring="0.0" @@ -2397,7 +6390,7 @@ compiler." # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then - $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 + func_warning "undefined symbols not allowed in $host shared libraries" build_libtool_libs=no build_old_libs=yes fi @@ -2405,12 +6398,36 @@ compiler." # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi + fi + func_generate_dlsyms "$libname" "$libname" "yes" + libobjs="$libobjs $symfileobj" + test "X$libobjs" = "X " && libobjs= + if test "$mode" != relink; then - # Remove our outputs. - $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" - $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$ECHO "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext | *.gcno) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + removelist="$removelist $p" + ;; + *) ;; + esac + done + test -n "$removelist" && \ + func_show_eval "${RM}r \$removelist" fi # Now set the variables for building old libraries. @@ -2418,15 +6435,15 @@ compiler." oldlibs="$oldlibs $output_objdir/$libname.$libext" # Transform .lo files to .o files. - oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` + oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` fi # Eliminate all temporary directories. - for path in $notinst_path; do - lib_search_path=`echo "$lib_search_path " | ${SED} -e 's% $path % %g'` - deplibs=`echo "$deplibs " | ${SED} -e 's% -L$path % %g'` - dependency_libs=`echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` - done + #for path in $notinst_path; do + # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` + # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` + # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` + #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. @@ -2438,7 +6455,7 @@ compiler." *) finalize_rpath="$finalize_rpath $libdir" ;; esac done - if test $hardcode_into_libs != yes || test $build_old_libs = yes; then + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi fi @@ -2466,22 +6483,28 @@ compiler." if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework - deplibs="$deplibs -framework System" + deplibs="$deplibs System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; - *-*-openbsd* | *-*-freebsd*) + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; *) # Add libc to deplibs on all other systems if necessary. - if test $build_libtool_need_lc = "yes"; then + if test "$build_libtool_need_lc" = "yes"; then deplibs="$deplibs -lc" fi ;; @@ -2508,7 +6531,7 @@ compiler." # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behaviour. + # implementing what was already the behavior. newdeplibs=$deplibs ;; test_compile) @@ -2516,94 +6539,127 @@ compiler." # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. - $rm conftest.c + $opt_dry_run || $RM conftest.c cat > conftest.c </dev/null` - for potent_lib in $potential_libs; do + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null \ - | grep " -> " >/dev/null; then + if ls -lLd "$potent_lib" 2>/dev/null | + $GREP " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an @@ -2616,93 +6672,115 @@ EOF potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; + *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ - | ${SED} 10q \ - | egrep "$file_magic_regex" > /dev/null; then + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi - done - done + done + done + fi if test -n "$a_deplib" ; then droppeddeps=yes - echo - echo "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" + $ECHO + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then - echo "*** with $libname but no candidates were found. (...for file magic test)" + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else - echo "*** with $libname and none of the candidates passed a file format test" - echo "*** using a file magic. Last file checked: $potlib" + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" fi fi - else + ;; + *) # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" - fi + ;; + esac done # Gone through all deplibs. ;; match_pattern*) - set dummy $deplibs_check_method - match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` for a_deplib in $deplibs; do - name="`expr $a_deplib : '-l\(.*\)'`" - # If $name is empty we are operating on a -L argument. - if test -n "$name" && test "$name" != "0"; then - libname=`eval \\$echo \"$libname_spec\"` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - potlib="$potent_lib" # see symlink-check below in file_magic test - if eval echo \"$potent_lib\" 2>/dev/null \ - | ${SED} 10q \ - | egrep "$match_pattern_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done done - done + fi if test -n "$a_deplib" ; then droppeddeps=yes - echo - echo "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" + $ECHO + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then - echo "*** with $libname but no candidates were found. (...for regex pattern test)" + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else - echo "*** with $libname and none of the candidates passed a file format test" - echo "*** using a regex pattern. Last file checked: $potlib" + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" fi fi - else + ;; + *) # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" - fi + ;; + esac done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" - if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ - -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | - grep . >/dev/null; then - echo + tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ + -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` + done + fi + if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | + $GREP . >/dev/null; then + $ECHO if test "X$deplibs_check_method" = "Xnone"; then - echo "*** Warning: inter-library dependencies are not supported in this platform." + $ECHO "*** Warning: inter-library dependencies are not supported in this platform." else - echo "*** Warning: inter-library dependencies are not known to be supported." + $ECHO "*** Warning: inter-library dependencies are not known to be supported." fi - echo "*** All declared inter-library dependencies are being dropped." + $ECHO "*** All declared inter-library dependencies are being dropped." droppeddeps=yes fi ;; @@ -2715,24 +6793,24 @@ EOF case $host in *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` + # On Rhapsody replace the C library with the System framework + newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then - echo - echo "*** Warning: libtool could not satisfy all declared inter-library" - echo "*** dependencies of module $libname. Therefore, libtool will create" - echo "*** a static module, that should work as long as the dlopening" - echo "*** application is linked with the -dlopen flag." + $ECHO + $ECHO "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + $ECHO "*** a static module, that should work as long as the dlopening" + $ECHO "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + $ECHO + $ECHO "*** However, this would only work if libtool was able to extract symbol" + $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" + $ECHO "*** not find such a program. So, this module is probably useless." + $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" @@ -2742,16 +6820,16 @@ EOF build_libtool_libs=no fi else - echo "*** The inter-library dependencies that have been dropped here will be" - echo "*** automatically added whenever a program is linked with this library" - echo "*** or is declared to -dlopen it." - - if test $allow_undefined = no; then - echo - echo "*** Since this library must not contain undefined symbols," - echo "*** because either the platform does not support them or" - echo "*** it was explicitly requested with -no-undefined," - echo "*** libtool will only create a static version of it." + $ECHO "*** The inter-library dependencies that have been dropped here will be" + $ECHO "*** automatically added whenever a program is linked with this library" + $ECHO "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + $ECHO + $ECHO "*** Since this library must not contain undefined symbols," + $ECHO "*** because either the platform does not support them or" + $ECHO "*** it was explicitly requested with -no-undefined," + $ECHO "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module @@ -2765,6 +6843,41 @@ EOF # Done checking deplibs! deplibs=$newdeplibs fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + deplibs="$new_libs" # All the library-specific variables (install_libdir is set above). library_names= @@ -2773,7 +6886,7 @@ EOF # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then - if test $hardcode_into_libs = yes; then + if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= @@ -2809,7 +6922,11 @@ EOF if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" - eval dep_rpath=\"$hardcode_libdir_flag_spec\" + if test -n "$hardcode_libdir_flag_spec_ld"; then + eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + else + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. @@ -2829,108 +6946,143 @@ EOF fi # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names - realname="$2" - shift; shift + shift + realname="$1" + shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname="$realname" fi - test -z "$dlname" && dlname=$soname + if test -z "$dlname"; then + dlname=$soname + fi lib="$output_objdir/$realname" + linknames= for link do linknames="$linknames $link" done - # Ensure that we have .o objects for linkers which dislike .lo - # (e.g. aix) in case we are running --disable-static - for obj in $libobjs; do - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` - if test ! -f $xdir/$oldobj; then - $show "(cd $xdir && ${LN_S} $baseobj $oldobj)" - $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $? - fi - done - # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + test "X$libobjs" = "X " && libobjs= + + delfiles= + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols="$output_objdir/$libname.uexp" + delfiles="$delfiles $export_symbols" + fi + + orig_export_symbols= + case $host_os in + cygwin* | mingw* | cegcc*) + if test -n "$export_symbols" && test -z "$export_symbols_regex"; then + # exporting using user supplied symfile + if test "x`$SED 1q $export_symbols`" != xEXPORTS; then + # and it's NOT already a .def file. Must figure out + # which of the given symbols are data symbols and tag + # them as such. So, trigger use of export_symbols_cmds. + # export_symbols gets reassigned inside the "prepare + # the list of exported symbols" if statement, so the + # include_expsyms logic still works. + orig_export_symbols="$export_symbols" + export_symbols= + always_export_symbols=yes + fi + fi + ;; + esac # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - $show "generating symbol list for \`$libname.la'" + func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" - $run $rm $export_symbols - eval cmds=\"$export_symbols_cmds\" + $opt_dry_run || $RM $export_symbols + cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? + eval cmd=\"$cmd\" + func_len " $cmd" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + func_show_eval "$cmd" 'exit $?' + skipped_export=false + else + # The command line is too long to execute in one step. + func_verbose "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi done IFS="$save_ifs" - if test -n "$export_symbols_regex"; then - $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" - $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - $show "$mv \"${export_symbols}T\" \"$export_symbols\"" - $run eval '$mv "${export_symbols}T" "$export_symbols"' + if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then - $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' + fi + + if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + tmp_deplibs="$tmp_deplibs $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec" && + test "$compiler_needs_object" = yes && + test -z "$libobjs"; then + # extract the archives, so we have objects to list. + # TODO: could optimize this to just extract one archive. + whole_archive_flag_spec= + fi if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= else gentop="$output_objdir/${outputname}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "mkdir $gentop" - $run mkdir "$gentop" - status=$? - if test $status -ne 0 && test ! -d "$gentop"; then - exit $status - fi generated="$generated $gentop" - for xlib in $convenience; do - # Extract the objects. - case $xlib in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" - status=$? - if test $status -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` - done + func_extract_archives $gentop $convenience + libobjs="$libobjs $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= fi fi @@ -2941,45 +7093,289 @@ EOF # Make a backup of the uninstalled library when relinking if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi # Do each of the archive commands. - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval cmds=\"$archive_expsym_cmds\" + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi else - save_deplibs="$deplibs" - for conv in $convenience; do - tmp_deplibs= - for test_deplib in $deplibs; do - if test "$test_deplib" != "$conv"; then - tmp_deplibs="$tmp_deplibs $test_deplib" + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test "X$skipped_export" != "X:" && + func_len " $test_cmds" && + len=$func_len_result && + test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise + # or, if using GNU ld and skipped_export is not :, use a linker + # script. + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + output_la=`$ECHO "X$output" | $Xsed -e "$basename"` + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + last_robj= + k=1 + + if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then + output=${output_objdir}/${output_la}.lnkscript + func_verbose "creating GNU ld script: $output" + $ECHO 'INPUT (' > $output + for obj in $save_libobjs + do + $ECHO "$obj" >> $output + done + $ECHO ')' >> $output + delfiles="$delfiles $output" + elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then + output=${output_objdir}/${output_la}.lnk + func_verbose "creating linker input file list: $output" + : > $output + set x $save_libobjs + shift + firstobj= + if test "$compiler_needs_object" = yes; then + firstobj="$1 " + shift + fi + for obj + do + $ECHO "$obj" >> $output + done + delfiles="$delfiles $output" + output=$firstobj\"$file_list_spec$output\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-${k}.$objext + eval test_cmds=\"$reload_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + if test "X$objlist" = X || + test "$len" -lt "$max_cmd_len"; then + func_append objlist " $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + eval concat_cmds=\"$reload_cmds $objlist $last_robj\" + else + # All subsequent reloadable object files will link in + # the last one created. + eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + func_arith $k + 1 + k=$func_arith_result + output=$output_objdir/$output_la-${k}.$objext + objlist=$obj + func_len " $last_robj" + func_arith $len0 + $func_len_result + len=$func_arith_result + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" + if test -n "$last_robj"; then + eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + fi + delfiles="$delfiles $output" + + else + output= + fi + + if ${skipped_export-false}; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi + fi + + test -n "$save_libobjs" && + func_verbose "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } done - deplibs="$tmp_deplibs" - done - eval cmds=\"$archive_cmds\" - deplibs="$save_deplibs" + IFS="$save_ifs" + + if test -n "$export_symbols_regex" && ${skipped_export-false}; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + + if ${skipped_export-false}; then + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + fi + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + fi + + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. + eval cmds=\"\$cmds~\$RM $delfiles\" + fi + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $dlprefiles + libobjs="$libobjs $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= fi + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? + eval cmd=\"$cmd\" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? - exit 0 + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + func_show_eval '${RM}r "$gentop"' + fi + fi + + exit $EXIT_SUCCESS fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then - $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? + func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' fi done @@ -2992,38 +7388,35 @@ EOF ;; obj) - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 - fi - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 + func_warning "\`-dlopen' is ignored for objects" fi - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 - fi + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for objects" ;; + esac - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 - fi + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for objects" - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 - fi + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for objects" - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 - fi + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for objects" + + test -n "$release" && \ + func_warning "\`-release' is ignored for objects" case $output in *.lo) - if test -n "$objs$old_deplibs"; then - $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 - exit 1 - fi - libobj="$output" - obj=`$echo "X$output" | $Xsed -e "$lo2o"` + test -n "$objs$old_deplibs" && \ + func_fatal_error "cannot build library object \`$output' from non-libtool objects" + + libobj=$output + func_lo2o "$libobj" + obj=$func_lo2o_result ;; *) libobj= @@ -3032,7 +7425,7 @@ EOF esac # Delete the old objects. - $run $rm $obj $libobj + $opt_dry_run || $RM $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create @@ -3041,155 +7434,136 @@ EOF reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec + # -Wl from whole_archive_flag_spec and hope we can get by with + # turning comma into space.. wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then - eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` else gentop="$output_objdir/${obj}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "mkdir $gentop" - $run mkdir "$gentop" - status=$? - if test $status -ne 0 && test ! -d "$gentop"; then - exit $status - fi generated="$generated $gentop" - for xlib in $convenience; do - # Extract the objects. - case $xlib in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" - status=$? - if test $status -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` - done + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi # Create the old-style object. - reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" - eval cmds=\"$reload_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + func_execute_cmds "$reload_cmds" 'exit $?' # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop + func_show_eval '${RM}r "$gentop"' fi - exit 0 + exit $EXIT_SUCCESS fi if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop + func_show_eval '${RM}r "$gentop"' fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. - $show "echo timestamp > $libobj" - $run eval "echo timestamp > $libobj" || exit $? - exit 0 + # $show "echo timestamp > $libobj" + # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" - eval cmds=\"$reload_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - else - # Just create a symlink. - $show $rm $libobj - $run $rm $libobj - xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$libobj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` - oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` - $show "(cd $xdir && $LN_S $oldobj $baseobj)" - $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $? + func_execute_cmds "$reload_cmds" 'exit $?' fi if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop + func_show_eval '${RM}r "$gentop"' fi - exit 0 + exit $EXIT_SUCCESS ;; prog) case $host in - *cygwin*) output=`echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; + *cygwin*) func_stripname '' '.exe' "$output" + output=$func_stripname_result.exe;; esac - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 - fi + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for programs" - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 - fi + test -n "$release" && \ + func_warning "\`-release' is ignored for programs" - if test "$preload" = yes; then - if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && - test "$dlopen_self_static" = unknown; then - $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." - fi - fi + test "$preload" = yes \ + && test "$dlopen_support" = unknown \ + && test "$dlopen_self" = unknown \ + && test "$dlopen_self_static" = unknown && \ + func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework - compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` - finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` - case $host in - *darwin*) - # Don't allow lazy linking, it breaks C++ global constructors - compile_command="$compile_command ${wl}-bind_at_load" - finalize_command="$finalize_command ${wl}-bind_at_load" - ;; - esac + compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + ;; + esac + + case $host in + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + # But is supposedly fixed on 10.4 or later (yay!). + if test "$tagname" = CXX ; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" + ;; + esac + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + compile_deplibs="$new_libs" + + compile_command="$compile_command $compile_deplibs" finalize_command="$finalize_command $finalize_deplibs" @@ -3233,11 +7607,18 @@ EOF esac fi case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; + ::) dllsearchpath=$libdir;; *) dllsearchpath="$dllsearchpath:$libdir";; esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac ;; esac done @@ -3287,238 +7668,49 @@ EOF if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - fi - - dlsyms= - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - dlsyms="${outputname}S.c" - else - $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 - fi + compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` fi - if test -n "$dlsyms"; then - case $dlsyms in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${outputname}.nm" - - $show "$rm $nlist ${nlist}S ${nlist}T" - $run $rm "$nlist" "${nlist}S" "${nlist}T" - - # Parse the name list into a source file. - $show "creating $output_objdir/$dlsyms" - - test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ -/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ -/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -/* Prevent the only kind of declaration conflicts we can make. */ -#define lt_preloaded_symbols some_other_symbol - -/* External symbol declarations for the compiler. */\ -" - - if test "$dlself" = yes; then - $show "generating symbol list for \`$output'" - - test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - for arg in $progfiles; do - $show "extracting global C symbols from \`$arg'" - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - if test -n "$export_symbols_regex"; then - $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols="$output_objdir/$output.exp" - $run $rm $export_symbols - $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - else - $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' - $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' - $run eval 'mv "$nlist"T "$nlist"' - fi - fi - - for arg in $dlprefiles; do - $show "extracting global C symbols from \`$arg'" - name=`echo "$arg" | ${SED} -e 's%^.*/%%'` - $run eval 'echo ": $name " >> "$nlist"' - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -z "$run"; then - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $mv "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if grep -v "^: " < "$nlist" | - if sort -k 3 /dev/null 2>&1; then - sort -k 3 - else - sort +2 - fi | - uniq > "$nlist"S; then - : - else - grep -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' - else - echo '/* NONE */' >> "$output_objdir/$dlsyms" - fi - - $echo >> "$output_objdir/$dlsyms" "\ - -#undef lt_preloaded_symbols - -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr address; -} -lt_preloaded_symbols[] = -{\ -" - - eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" - - $echo >> "$output_objdir/$dlsyms" "\ - {0, (lt_ptr) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif\ -" - fi + func_generate_dlsyms "$outputname" "@PROGRAM@" "no" - pic_flag_for_symtable= - case $host in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; - esac;; - *-*-hpux*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DPIC";; - esac - esac - - # Now compile the dynamic symbol file. - $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" - $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? - - # Clean up the generated files. - $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" - $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" - - # Transform the symbol file into the correct name. - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - ;; - *-*-freebsd*) - # FreeBSD doesn't need this... - ;; - *) - $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 - exit 1 - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + # template prelinking step + if test -n "$prelink_cmds"; then + func_execute_cmds "$prelink_cmds" 'exit $?' fi - if test $need_relink = no || test "$build_libtool_libs" != yes; then + wrappers_required=yes + case $host in + *cygwin* | *mingw* ) + if test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + *cegcc) + # Disable wrappers for cegcc, we are cross compiling anyway. + wrappers_required=no + ;; + *) + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + esac + if test "$wrappers_required" = no; then # Replace the output file specification. - compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. - $show "$link_command" - $run eval "$link_command" - status=$? + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' # Delete the generated files. - if test -n "$dlsyms"; then - $show "$rm $output_objdir/${outputname}S.${objext}" - $run $rm "$output_objdir/${outputname}S.${objext}" + if test -f "$output_objdir/${outputname}S.${objext}"; then + func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' fi - exit $status - fi - - if test -n "$shlibpath_var"; then - # We should set the shlibpath_var - rpath= - for dir in $temp_rpath; do - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) - # Absolute path. - rpath="$rpath$dir:" - ;; - *) - # Relative path: add a thisdir entry. - rpath="$rpath\$thisdir/$dir:" - ;; - esac - done - temp_rpath="$rpath" + exit $exit_status fi if test -n "$compile_shlibpath$finalize_shlibpath"; then @@ -3553,13 +7745,12 @@ static const void *lt_preloaded_setup() { # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. - $run $rm $output + $opt_dry_run || $RM $output # Link the executable and exit - $show "$link_command" - $run eval "$link_command" || exit $? - exit 0 + func_show_eval "$link_command" 'exit $?' + exit $EXIT_SUCCESS fi if test "$hardcode_action" = relink; then @@ -3567,13 +7758,13 @@ static const void *lt_preloaded_setup() { link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" - $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 - $echo "$modename: \`$output' will be relinked during installation" 1>&2 + func_warning "this platform does not like uninstalled shared libraries" + func_warning "\`$output' will be relinked during installation" else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then - relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= @@ -3585,246 +7776,104 @@ static const void *lt_preloaded_setup() { fi # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. - $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname + $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname - $show "$link_command" - $run eval "$link_command" || exit $? + func_show_eval "$link_command" 'exit $?' # Now create the wrapper script. - $show "creating $output" + func_verbose "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else - var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` - relink_command="$var=\"$var_value\"; export $var; $relink_command" + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` fi - # Quote $echo for shipping. - if test "X$echo" = "X$SHELL $0 --fallback-echo"; then - case $0 in - [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; - *) qecho="$SHELL `pwd`/$0 --fallback-echo";; + # Quote $ECHO for shipping. + if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then + case $progpath in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; + *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; esac - qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` + qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` else - qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` + qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` fi - # Only actually do things if our run command is non-null. - if test -z "$run"; then + # Only actually do things if not in dry run mode. + $opt_dry_run || { # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in - *.exe) output=`echo $output|${SED} 's,.exe$,,'` ;; + *.exe) func_stripname '' '.exe' "$output" + output=$func_stripname_result ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in - *cygwin*) exeext=.exe ;; + *cygwin*) + exeext=.exe + func_stripname '' '.exe' "$outputname" + outputname=$func_stripname_result ;; *) exeext= ;; esac - $rm $output - trap "$rm $output; exit 1" 1 2 15 - - $echo > $output "\ -#! $SHELL - -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed="${SED}"' -e 1s/^X//' -sed_quote_subst='$sed_quote_subst' - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi - -relink_command=\"$relink_command\" - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variable: - notinst_deplibs='$notinst_deplibs' -else - # When we are sourced in execute mode, \$file and \$echo are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - echo=\"$qecho\" - file=\"\$0\" - # Make sure echo works. - if test \"X\$1\" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then - # Yippee, \$echo works! - : - else - # Restart under the correct shell, and then maybe \$echo will work. - exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} - fi - fi\ -" - $echo >> $output "\ - - # Find the directory that this script lives in. - thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` - done - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test "$fast_install" = yes; then - echo >> $output "\ - program=lt-'$outputname'$exeext - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || \\ - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $mkdir \"\$progdir\" - else - $rm \"\$progdir/\$file\" - fi" - - echo >> $output "\ - - # relink executable if necessary - if test -n \"\$relink_command\"; then - if relink_command_output=\`eval \$relink_command 2>&1\`; then : - else - $echo \"\$relink_command_output\" >&2 - $rm \"\$progdir/\$file\" - exit 1 - fi - fi - - $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $rm \"\$progdir/\$program\"; - $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $rm \"\$progdir/\$file\" - fi" - else - echo >> $output "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" - fi - - echo >> $output "\ - - if test -f \"\$progdir/\$program\"; then" - - # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $echo >> $output "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 ${SED} - $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` - - export $shlibpath_var -" - fi - - # fixup the dll searchpath if we need to. - if test -n "$dllsearchpath"; then - $echo >> $output "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - - $echo >> $output "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. -" case $host in - # win32 systems need to use the prog path for dll - # lookup to work - *-*-cygwin* | *-*-pw32*) - $echo >> $output "\ - exec \$progdir/\$program \${1+\"\$@\"} -" - ;; - - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2*) - $echo >> $output "\ - exec \$progdir\\\\\$program \${1+\"\$@\"} -" + *cygwin* | *mingw* ) + func_dirname_and_basename "$output" "" "." + output_name=$func_basename_result + output_path=$func_dirname_result + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $RM $cwrappersource $cwrapper + trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + func_emit_cwrapperexe_src > $cwrappersource + + # The wrapper executable is built using the $host compiler, + # because it contains $host paths and files. If cross- + # compiling, it, like the target executable, must be + # executed on the $host or under an emulation environment. + $opt_dry_run || { + $LTCC $LTCFLAGS -o $cwrapper $cwrappersource + $STRIP $cwrapper + } + + # Now, create the wrapper script for func_source use: + func_ltwrapper_scriptname $cwrapper + $RM $func_ltwrapper_scriptname_result + trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || { + # note: this script will not be executed, so do not chmod. + if test "x$build" = "x$host" ; then + $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result + else + func_emit_wrapper no > $func_ltwrapper_scriptname_result + fi + } ;; + * ) + $RM $output + trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 - *) - $echo >> $output "\ - # Export the path to the program. - PATH=\"\$progdir:\$PATH\" - export PATH - - exec \$program \${1+\"\$@\"} -" + func_emit_wrapper no > $output + chmod +x $output ;; esac - $echo >> $output "\ - \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" - exit 1 - fi - else - # The program doesn't exist. - \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 - \$echo \"This script is just a wrapper for \$program.\" 1>&2 - echo \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 - fi -fi\ -" - chmod +x $output - fi - exit 0 + } + exit $EXIT_SUCCESS ;; esac @@ -3832,7 +7881,7 @@ fi\ for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save" + oldobjs="$libobjs_save $symfileobj" addlibs="$convenience" build_libtool_libs=no else @@ -3840,110 +7889,167 @@ fi\ oldobjs="$libobjs_save" build_libtool_libs=no else - oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` + oldobjs="$old_deplibs $non_pic_objects" + if test "$preload" = yes && test -f "$symfileobj"; then + oldobjs="$oldobjs $symfileobj" + fi fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "mkdir $gentop" - $run mkdir "$gentop" - status=$? - if test $status -ne 0 && test ! -d "$gentop"; then - exit $status - fi generated="$generated $gentop" - # Add in members from convenience archives. - for xlib in $addlibs; do - # Extract the objects. - case $xlib in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" - status=$? - if test $status -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` - done + func_extract_archives $gentop $addlibs + oldobjs="$oldobjs $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - eval cmds=\"$old_archive_from_new_cmds\" + cmds=$old_archive_from_new_cmds else - # Ensure that we have .o objects in place in case we decided - # not to build a shared library, and have fallen back to building - # static libs even though --disable-static was passed! - for oldobj in $oldobjs; do - if test ! -f $oldobj; then - xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$oldobj"; then - xdir="." + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $dlprefiles + oldobjs="$oldobjs $func_extract_archives_result" + fi + + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + func_basename "$obj" + $ECHO "$func_basename_result" + done | sort | sort -uc >/dev/null 2>&1); then + : + else + $ECHO "copying selected object files to avoid basename conflicts..." + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + func_mkdir_p "$gentop" + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + func_basename "$obj" + objbase="$func_basename_result" + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + func_arith $counter + 1 + counter=$func_arith_result + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + oldobjs="$oldobjs $gentop/$newobj" + ;; + *) oldobjs="$oldobjs $obj" ;; + esac + done + fi + eval cmds=\"$old_archive_cmds\" + + func_len " $cmds" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + func_verbose "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + oldobjs= + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + eval test_cmds=\"$old_archive_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + for obj in $save_oldobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + func_append objlist " $obj" + if test "$len" -lt "$max_cmd_len"; then + : else - xdir="$xdir" + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + len=$len0 fi - baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'` - obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` - $show "(cd $xdir && ${LN_S} $obj $baseobj)" - $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $? + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" fi - done - - eval cmds=\"$old_archive_cmds\" + fi fi - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + func_execute_cmds "$cmds" 'exit $?' done - if test -n "$generated"; then - $show "${rm}r$generated" - $run ${rm}r$generated - fi + test -n "$generated" && \ + func_show_eval "${RM}r$generated" # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" - $show "creating $output" + func_verbose "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else - var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` - relink_command="$var=\"$var_value\"; export $var; $relink_command" + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args)" - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi # Only create the output if not a dry run. - if test -z "$run"; then + $opt_dry_run || { for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then @@ -3955,12 +8061,11 @@ fi\ for deplib in $dependency_libs; do case $deplib in *.la) - name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` + func_basename "$deplib" + name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -z "$libdir"; then - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit 1 - fi + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" newdependency_libs="$newdependency_libs $libdir/$name" ;; *) newdependency_libs="$newdependency_libs $deplib" ;; @@ -3968,37 +8073,68 @@ fi\ done dependency_libs="$newdependency_libs" newdlfiles= + for lib in $dlfiles; do - name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - if test -z "$libdir"; then - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit 1 - fi - newdlfiles="$newdlfiles $libdir/$name" + case $lib in + *.la) + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + newdlfiles="$newdlfiles $libdir/$name" + ;; + *) newdlfiles="$newdlfiles $lib" ;; + esac done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do - name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - if test -z "$libdir"; then - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit 1 - fi - newdlprefiles="$newdlprefiles $libdir/$name" + case $lib in + *.la) + # Only pass preopened files to the pseudo-archive (for + # eventual linking with the app. that links it) if we + # didn't already link the preopened objects directly into + # the library: + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + newdlprefiles="$newdlprefiles $libdir/$name" + ;; + esac + done + dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlfiles="$newdlfiles $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlprefiles="$newdlprefiles $abs" done dlprefiles="$newdlprefiles" fi - $rm $output + $RM $output # place dlname in correct position for cygwin tdlname=$dlname case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac - $echo > $output "\ + $ECHO > $output "\ # $outputname - a libtool library file -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. @@ -4012,9 +8148,15 @@ library_names='$library_names' # The name of the static archive. old_library='$old_library' +# Linker flags that can not go in dependency_libs. +inherited_linker_flags='$new_inherited_linker_flags' + # Libraries that this one depends upon. dependency_libs='$dependency_libs' +# Names of additional weak libraries provided by this library +weak_library_names='$weak_libs' + # Version information for $libname. current=$current age=$age @@ -4023,705 +8165,39 @@ revision=$revision # Is this an already installed library? installed=$installed +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" - if test "$installed" = no && test $need_relink = yes; then - $echo >> $output "\ + if test "$installed" = no && test "$need_relink" = yes; then + $ECHO >> $output "\ relink_command=\"$relink_command\"" fi done - fi + } # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. - $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" - $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? + func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ;; esac - exit 0 - ;; - - # libtool install mode - install) - modename="$modename: install" - - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || - # Allow the use of GNU shtool's install command. - $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then - # Aesthetically quote it. - arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$arg " - arg="$1" - shift - else - install_prog= - arg="$nonopt" - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog$arg" - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=no - stripme= - for arg - do - if test -n "$dest"; then - files="$files $dest" - dest="$arg" - continue - fi - - case $arg in - -d) isdir=yes ;; - -f) prev="-f" ;; - -g) prev="-g" ;; - -m) prev="-m" ;; - -o) prev="-o" ;; - -s) - stripme=" -s" - continue - ;; - -*) ;; - - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - prev= - else - dest="$arg" - continue - fi - ;; - esac - - # Aesthetically quote the argument. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog $arg" - done - - if test -z "$install_prog"; then - $echo "$modename: you must specify an install program" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test -n "$prev"; then - $echo "$modename: the \`$prev' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test -z "$files"; then - if test -z "$dest"; then - $echo "$modename: no file or destination specified" 1>&2 - else - $echo "$modename: you must specify a destination" 1>&2 - fi - $echo "$help" 1>&2 - exit 1 - fi - - # Strip any trailing slash from the destination. - dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" - destname= - else - destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` - test "X$destdir" = "X$dest" && destdir=. - destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` - - # Not a directory, so check to see that there is only one file specified. - set dummy $files - if test $# -gt 2; then - $echo "$modename: \`$dest' is not a directory" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - fi - case $destdir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case $file in - *.lo) ;; - *) - $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case $file in - *.$libext) - # Do the static libraries later. - staticlibs="$staticlibs $file" - ;; - - *.la) - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - library_names= - old_library= - relink_command= - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) current_libdirs="$current_libdirs $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) future_libdirs="$future_libdirs $libdir" ;; - esac - fi - - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ - test "X$dir" = "X$file/" && dir= - dir="$dir$objdir" - - if test -n "$relink_command"; then - $echo "$modename: warning: relinking \`$file'" 1>&2 - $show "$relink_command" - if $run eval "$relink_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - continue - fi - fi - - # See the names of the shared library. - set dummy $library_names - if test -n "$2"; then - realname="$2" - shift - shift - - srcname="$realname" - test -n "$relink_command" && srcname="$realname"T - - # Install the shared library and build the symlinks. - $show "$install_prog $dir/$srcname $destdir/$realname" - $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? - if test -n "$stripme" && test -n "$striplib"; then - $show "$striplib $destdir/$realname" - $run eval "$striplib $destdir/$realname" || exit $? - fi - - if test $# -gt 0; then - # Delete the old symlinks, and create new ones. - for linkname - do - if test "$linkname" != "$realname"; then - $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" - fi - done - fi - - # Do each command in the postinstall commands. - lib="$destdir/$realname" - eval cmds=\"$postinstall_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - - # Install the pseudo-library for information purposes. - case $host in - *-*-freebsd*) - # Do not install the useless pseudo-library - ;; - *) - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - instname="$dir/$name"i - $show "$install_prog $instname $destdir/$name" - $run eval "$install_prog $instname $destdir/$name" || exit $? - ;; - esac - - # Maybe install the static library, too. - test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # Deduce the name of the destination old-style object file. - case $destfile in - *.lo) - staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` - ;; - *.$objext) - staticdest="$destfile" - destfile= - ;; - *) - $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - esac - - # Install the libtool object if requested. - if test -n "$destfile"; then - $show "$install_prog $file $destfile" - $run eval "$install_prog $file $destfile" || exit $? - fi - - # Install the old object if enabled. - if test "$build_old_libs" = yes; then - # Deduce the name of the old-style object file. - staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` - - $show "$install_prog $staticobj $staticdest" - $run eval "$install_prog \$staticobj \$staticdest" || exit $? - fi - exit 0 - ;; - - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # Do a test to see if this is really a libtool program. - case $host in - *cygwin*|*mingw*) - wrapper=`echo $file | ${SED} -e 's,.exe$,,'` - ;; - *) - wrapper=$file - ;; - esac - if (${SED} -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then - notinst_deplibs= - relink_command= - - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $wrapper ;; - *) . ./$wrapper ;; - esac - - # Check the variables that should have been set. - if test -z "$notinst_deplibs"; then - $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 - exit 1 - fi - - finalize=yes - for lib in $notinst_deplibs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - # If there is no directory component, then add one. - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - fi - libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test - if test -n "$libdir" && test ! -f "$libfile"; then - $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 - finalize=no - fi - done - - relink_command= - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $wrapper ;; - *) . ./$wrapper ;; - esac - - outputname= - if test "$fast_install" = no && test -n "$relink_command"; then - if test "$finalize" = yes && test -z "$run"; then - tmpdir="/tmp" - test -n "$TMPDIR" && tmpdir="$TMPDIR" - tmpdir="$tmpdir/libtool-$$" - if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : - else - $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 - continue - fi - file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - outputname="$tmpdir/$file" - # Replace the output file specification. - relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` - - $show "$relink_command" - if $run eval "$relink_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - ${rm}r "$tmpdir" - continue - fi - file="$outputname" - else - $echo "$modename: warning: cannot relink \`$file'" 1>&2 - fi - else - # Install the binary that we compiled earlier. - file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - - # remove .exe since cygwin /usr/bin/install will append another - # one anyways - case $install_prog,$host in - /usr/bin/install*,*cygwin*) - case $file:$destfile in - *.exe:*.exe) - # this is ok - ;; - *.exe:*) - destfile=$destfile.exe - ;; - *:*.exe) - destfile=`echo $destfile | ${SED} -e 's,.exe$,,'` - ;; - esac - ;; - esac - $show "$install_prog$stripme $file $destfile" - $run eval "$install_prog\$stripme \$file \$destfile" || exit $? - test -n "$outputname" && ${rm}r "$tmpdir" - ;; - esac - done - - for file in $staticlibs; do - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - - # Set up the ranlib parameters. - oldlib="$destdir/$name" - - $show "$install_prog $file $oldlib" - $run eval "$install_prog \$file \$oldlib" || exit $? - - if test -n "$stripme" && test -n "$striplib"; then - $show "$old_striplib $oldlib" - $run eval "$old_striplib $oldlib" || exit $? - fi - - # Do each command in the postinstall commands. - eval cmds=\"$old_postinstall_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$future_libdirs"; then - $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 - fi - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - test -n "$run" && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $0 --finish$current_libdirs' - else - exit 0 - fi - ;; - - # libtool finish mode - finish) - modename="$modename: finish" - libdirs="$nonopt" - admincmds= - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for dir - do - libdirs="$libdirs $dir" - done - - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - eval cmds=\"$finish_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || admincmds="$admincmds - $cmd" - done - IFS="$save_ifs" - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $run eval "$cmds" || admincmds="$admincmds - $cmds" - fi - done - fi - - # Exit here if they wanted silent mode. - test "$show" = ":" && exit 0 - - echo "----------------------------------------------------------------------" - echo "Libraries have been installed in:" - for libdir in $libdirs; do - echo " $libdir" - done - echo - echo "If you ever happen to want to link against installed libraries" - echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use the \`-LLIBDIR'" - echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - echo " during execution" - fi - if test -n "$runpath_var"; then - echo " - add LIBDIR to the \`$runpath_var' environment variable" - echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - echo " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - echo " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - echo - echo "See any operating system documentation about shared libraries for" - echo "more information, such as the ld(1) and ld.so(8) manual pages." - echo "----------------------------------------------------------------------" - exit 0 - ;; - - # libtool execute mode - execute) - modename="$modename: execute" - - # The first argument is the command name. - cmd="$nonopt" - if test -z "$cmd"; then - $echo "$modename: you must specify a COMMAND" 1>&2 - $echo "$help" - exit 1 - fi - - # Handle -dlopen flags immediately. - for file in $execute_dlfiles; do - if test ! -f "$file"; then - $echo "$modename: \`$file' is not a file" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - dir= - case $file in - *.la) - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Read the libtool library. - dlname= - library_names= - - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" - continue - fi - - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - - if test -f "$dir/$objdir/$dlname"; then - dir="$dir/$objdir" - else - $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 - exit 1 - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - ;; - - *) - $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic="$magic" - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case $file in - -*) ;; - *) - # Do a test to see if this is really a libtool program. - if (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Transform arg to wrapped name. - file="$progdir/$program" - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` - args="$args \"$file\"" - done - - if test -z "$run"; then - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - fi + exit $EXIT_SUCCESS +} - # Restore saved enviroment variables - if test "${save_LC_ALL+set}" = set; then - LC_ALL="$save_LC_ALL"; export LC_ALL - fi - if test "${save_LANG+set}" = set; then - LANG="$save_LANG"; export LANG - fi +{ test "$mode" = link || test "$mode" = relink; } && + func_mode_link ${1+"$@"} - # Now prepare to actually exec the command. - exec_cmd="\$cmd$args" - else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" - $echo "export $shlibpath_var" - fi - $echo "$cmd$args" - exit 0 - fi - ;; - # libtool clean and uninstall mode - clean | uninstall) - modename="$modename: $mode" - rm="$nonopt" +# func_mode_uninstall arg... +func_mode_uninstall () +{ + $opt_debug + RM="$nonopt" files= rmforce= exit_status=0 @@ -4733,33 +8209,32 @@ relink_command=\"$relink_command\"" for arg do case $arg in - -f) rm="$rm $arg"; rmforce=yes ;; - -*) rm="$rm $arg" ;; + -f) RM="$RM $arg"; rmforce=yes ;; + -*) RM="$RM $arg" ;; *) files="$files $arg" ;; esac done - if test -z "$rm"; then - $echo "$modename: you must specify an RM program" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi + test -z "$RM" && \ + func_fatal_help "you must specify an RM program" rmdirs= + origobjdir="$objdir" for file in $files; do - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$file"; then - dir=. - objdir="$objdir" + func_dirname "$file" "" "." + dir="$func_dirname_result" + if test "X$dir" = X.; then + objdir="$origobjdir" else - objdir="$dir/$objdir" + objdir="$dir/$origobjdir" fi - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - test $mode = uninstall && objdir="$dir" + func_basename "$file" + name="$func_basename_result" + test "$mode" = uninstall && objdir="$dir" # Remember objdir for removal later, being careful to avoid duplicates - if test $mode = clean; then + if test "$mode" = clean; then case " $rmdirs " in *" $objdir "*) ;; *) rmdirs="$rmdirs $objdir" ;; @@ -4767,9 +8242,9 @@ relink_command=\"$relink_command\"" fi # Don't error if the file doesn't exist and rm -f was used. - if (test -L "$file") >/dev/null 2>&1 \ - || (test -h "$file") >/dev/null 2>&1 \ - || test -f "$file"; then + if { test -L "$file"; } >/dev/null 2>&1 || + { test -h "$file"; } >/dev/null 2>&1 || + test -f "$file"; then : elif test -d "$file"; then exit_status=1 @@ -4783,298 +8258,156 @@ relink_command=\"$relink_command\"" case $name in *.la) # Possibly a libtool archive, so verify it. - if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - . $dir/$name + if func_lalib_p "$file"; then + func_source $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do rmfiles="$rmfiles $objdir/$n" done test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" - test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" - if test $mode = uninstall; then + case "$mode" in + clean) + case " $library_names " in + # " " in the beginning catches empty $dlname + *" $dlname "*) ;; + *) rmfiles="$rmfiles $objdir/$dlname" ;; + esac + test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + ;; + uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. - eval cmds=\"$postuninstall_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - if test $? != 0 && test "$rmforce" != yes; then - exit_status=1 - fi - done - IFS="$save_ifs" + func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. - eval cmds=\"$old_postuninstall_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - if test $? != 0 && test "$rmforce" != yes; then - exit_status=1 - fi - done - IFS="$save_ifs" + func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. - fi + ;; + esac fi ;; *.lo) - if test "$build_old_libs" = yes; then - oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` - rmfiles="$rmfiles $dir/$oldobj" + # Possibly a libtool object, so verify it. + if func_lalib_p "$file"; then + + # Read the .lo file + func_source $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" && + test "$pic_object" != none; then + rmfiles="$rmfiles $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" && + test "$non_pic_object" != none; then + rmfiles="$rmfiles $dir/$non_pic_object" + fi fi ;; *) - # Do a test to see if this is a libtool program. - if test $mode = clean && - (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - relink_command= - . $dir/$file + if test "$mode" = clean ; then + noexename=$name + case $file in + *.exe) + func_stripname '' '.exe' "$file" + file=$func_stripname_result + func_stripname '' '.exe' "$name" + noexename=$func_stripname_result + # $file with .exe has already been added to rmfiles, + # add $file without .exe + rmfiles="$rmfiles $file" + ;; + esac + # Do a test to see if this is a libtool program. + if func_ltwrapper_p "$file"; then + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result + rmfiles="$rmfiles $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename + fi - rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" - if test "$fast_install" = yes && test -n "$relink_command"; then - rmfiles="$rmfiles $objdir/lt-$name" + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + rmfiles="$rmfiles $objdir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + rmfiles="$rmfiles $objdir/lt-${noexename}.c" + fi fi fi ;; esac - $show "$rm $rmfiles" - $run $rm $rmfiles || exit_status=1 + func_show_eval "$RM $rmfiles" 'exit_status=1' done + objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then - $show "rmdir $dir" - $run rmdir $dir >/dev/null 2>&1 + func_show_eval "rmdir $dir >/dev/null 2>&1" fi done exit $exit_status - ;; +} - "") - $echo "$modename: you must specify a MODE" 1>&2 - $echo "$generic_help" 1>&2 - exit 1 - ;; - esac +{ test "$mode" = uninstall || test "$mode" = clean; } && + func_mode_uninstall ${1+"$@"} - if test -z "$exec_cmd"; then - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$generic_help" 1>&2 - exit 1 - fi -fi # test -z "$show_help" +test -z "$mode" && { + help="$generic_help" + func_fatal_help "you must specify a MODE" +} + +test -z "$exec_cmd" && \ + func_fatal_help "invalid operation mode \`$mode'" if test -n "$exec_cmd"; then - eval exec $exec_cmd - exit 1 + eval exec "$exec_cmd" + exit $EXIT_FAILURE fi -# We need to display help for each of the modes. -case $mode in -"") $echo \ -"Usage: $modename [OPTION]... [MODE-ARG]... - -Provide generalized library-building support services. - - --config show all configuration variables - --debug enable verbose shell tracing --n, --dry-run display commands without modifying any files - --features display basic configuration information and exit - --finish same as \`--mode=finish' - --help display this help message and exit - --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] - --quiet same as \`--silent' - --silent don't print informational messages - --version print version information - -MODE must be one of the following: - - clean remove files from the build directory - compile compile a source file into a libtool object - execute automatically set library path, then run a program - finish complete the installation of libtool libraries - install install libraries or executables - link create a library or an executable - uninstall remove libraries from an installed directory - -MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for -a more detailed description of MODE." - exit 0 - ;; - -clean) - $echo \ -"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -Remove files from the build directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. +exit $exit_status -If FILE is a libtool library, object or program, all the files associated -with it are deleted. Otherwise, only FILE itself is deleted using RM." - ;; -compile) - $echo \ -"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. -Compile a source file into a libtool library object. +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -prefer-pic try to building PIC objects only - -prefer-non-pic try to building non-PIC objects only - -static always build a \`.o' file suitable for static linking - -COMPILE-COMMAND is a command to be used in creating a \`standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." - ;; - -execute) - $echo \ -"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to \`-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - -finish) - $echo \ -"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." - ;; - -install) - $echo \ -"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - -link) - $echo \ -"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-fast-install disable the fast-install mode - -no-install link a not-installable executable - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -static do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -All other options (arguments beginning with \`-') are ignored. - -Every other argument is treated as a filename. Files ending in \`.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. - -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -is created, otherwise an executable program is created." - ;; - -uninstall) - $echo \ -"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - -*) - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; -esac - -echo -$echo "Try \`$modename --help' for more information about other modes." - -exit 0 +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: +# vi:sw=2 + -- 1.7.0 debian/patches/debian-changes-3.5.20-12.10000644000000000000000000017555711430536251014516 0ustar Description: Upstream changes introduced in version 3.5.20-12.1 This patch has been created by dpkg-source during the package build. Here's the last changelog entry, hopefully it gives details on why those changes were made: . ifhp (3.5.20-12.1) unstable; urgency=low . [Jari Aalto] * Non-maintainer upload. - Move to packaging format "3.0 (quilt)" * debian/changelog - Delete EOL whitespaces * debian/compat - Update to 7. * debian/control - (Build-Depends): update obsolete gs to ghostscript. (important; Closes: #539663). Update to debhelper 7.1. - (Homepage): Update to Freshmeat. - (Maintainer): Set to QA Group. - (Standards-Version): Update to 3.8.4. * debian/copyright - Fix lintian copyright-without-copyright-notice. * debian/doc-base - (Section): Update obsolete Printing to Office. * debian/patches - (Number 10): New. Fix syntax error; missing quote. - (Number 30): New. Pull out all Debian changes so far and Fix hp1100 part of configuration file. Patch thanks to Holger Klawitter . (Closes: #492685). * debian/{postinst,config} - Fix Lintian maintainer-script-ignores-errors. * debian/rules - (install): Update dh_clean to dh_prep. * debian/source/format - New file. . The person named in the Author field signed this changelog entry. Author: Jari Aalto Bug-Debian: http://bugs.debian.org/492685 Bug-Debian: http://bugs.debian.org/539663 --- The information above should follow the Patch Tagging Guidelines, please checkout http://dep.debian.net/deps/dep3/ to learn about the format. Here are templates for supplementary fields that you might want to add: Origin: , Bug: Bug-Debian: http://bugs.debian.org/ Bug-Ubuntu: https://launchpad.net/bugs/ Forwarded: Reviewed-By: Last-Update: --- ifhp-3.5.20.orig/config.sub +++ ifhp-3.5.20/config.sub @@ -1,9 +1,9 @@ #! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. +# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. -timestamp='2003-07-04' +timestamp='2006-02-23' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -21,14 +21,15 @@ timestamp='2003-07-04' # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, -# Boston, MA 02111-1307, USA. - +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. + # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # @@ -70,7 +71,7 @@ Report bugs and patches to . # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. @@ -53,7 +55,7 @@ version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO @@ -66,11 +68,11 @@ Try \`$me --help' for more information." while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) - echo "$timestamp" ; exit 0 ;; + echo "$timestamp" ; exit ;; --version | -v ) - echo "$version" ; exit 0 ;; + echo "$version" ; exit ;; --help | --h* | -h ) - echo "$usage"; exit 0 ;; + echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. @@ -104,7 +106,7 @@ set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; @@ -123,7 +125,7 @@ case $CC_FOR_BUILD,$HOST_CC,$CC in ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ;' +esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) @@ -196,50 +198,32 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" - exit 0 ;; - amiga:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - arc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - hp300:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mac68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - macppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvmeppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - pmax:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sgi:OpenBSD:*:*) - echo mipseb-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sun3:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - wgrisc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; + exit ;; *:OpenBSD:*:*) - echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerppc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; alpha:OSF1:*:*) - if test $UNAME_RELEASE = "V4.0"; then + case $UNAME_RELEASE in + *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - fi + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU @@ -277,42 +261,49 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ "EV7.9 (21364A)") UNAME_MACHINE="alphaev79" ;; esac + # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit 0 ;; - Alpha*:OpenVMS:*:*) - echo alpha-hp-vms - exit 0 ;; + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix - exit 0 ;; + exit ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 - exit 0 ;; + exit ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 - exit 0;; + exit ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos - exit 0 ;; + exit ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos - exit 0 ;; + exit ;; *:OS/390:*:*) echo i370-ibm-openedition - exit 0 ;; + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} - exit 0;; + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp - exit 0;; + exit ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then @@ -320,32 +311,32 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ else echo pyramid-pyramid-bsd fi - exit 0 ;; + exit ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 - exit 0 ;; + exit ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 - exit 0 ;; - DRS?6000:UNIX_SV:4.2*:7*) + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7 && exit 0 ;; + sparc) echo sparc-icl-nx7; exit ;; esac ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; i86pc:SunOS:5.*:*) echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) @@ -354,10 +345,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit 0 ;; + exit ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} - exit 0 ;; + exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 @@ -369,10 +360,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ echo sparc-sun-sunos${UNAME_RELEASE} ;; esac - exit 0 ;; + exit ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} - exit 0 ;; + exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor @@ -383,37 +374,40 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} - exit 0 ;; + exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 - exit 0 ;; + exit ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} - exit 0 ;; + exit ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} - exit 0 ;; + exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} - exit 0 ;; + exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c @@ -437,32 +431,33 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ exit (-1); } EOF - $CC_FOR_BUILD -o $dummy $dummy.c \ - && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ - && exit 0 + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } echo mips-mips-riscos${UNAME_RELEASE} - exit 0 ;; + exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax - exit 0 ;; + exit ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax - exit 0 ;; + exit ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax - exit 0 ;; + exit ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix - exit 0 ;; + exit ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 - exit 0 ;; + exit ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 - exit 0 ;; + exit ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 - exit 0 ;; + exit ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` @@ -478,29 +473,29 @@ EOF else echo i586-dg-dgux${UNAME_RELEASE} fi - exit 0 ;; + exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 - exit 0 ;; + exit ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 - exit 0 ;; + exit ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 - exit 0 ;; + exit ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd - exit 0 ;; + exit ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit 0 ;; + exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix - exit 0 ;; + exit ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` @@ -508,7 +503,7 @@ EOF IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit 0 ;; + exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build @@ -523,14 +518,18 @@ EOF exit(0); } EOF - $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 - echo rs6000-ibm-aix3.2.5 + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi - exit 0 ;; + exit ;; *:AIX:*:[45]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then @@ -544,28 +543,28 @@ EOF IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit 0 ;; + exit ;; *:AIX:*:*) echo rs6000-ibm-aix - exit 0 ;; + exit ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 - exit 0 ;; + exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit 0 ;; # report: romp-ibm BSD 4.3 + exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx - exit 0 ;; + exit ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 - exit 0 ;; + exit ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd - exit 0 ;; + exit ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 - exit 0 ;; + exit ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in @@ -627,9 +626,19 @@ EOF esac if [ ${HP_ARCH} = "hppa2.0w" ] then - # avoid double evaluation of $set_cc_for_build - test -n "$CC_FOR_BUILD" || eval $set_cc_for_build - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep __LP64__ >/dev/null then HP_ARCH="hppa2.0w" else @@ -637,11 +646,11 @@ EOF fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit 0 ;; + exit ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} - exit 0 ;; + exit ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c @@ -669,153 +678,177 @@ EOF exit (0); } EOF - $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 - exit 0 ;; + exit ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd - exit 0 ;; + exit ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd - exit 0 ;; + exit ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix - exit 0 ;; + exit ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf - exit 0 ;; + exit ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf - exit 0 ;; + exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi - exit 0 ;; + exit ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites - exit 0 ;; + exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd - exit 0 ;; + exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi - exit 0 ;; + exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd - exit 0 ;; + exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd - exit 0 ;; + exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd - exit 0 ;; + exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; *:UNICOS/mp:*:*) - echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit 0 ;; + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit 0 ;; + exit ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; + exit ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; - *:FreeBSD:*:*|*:GNU/FreeBSD:*:*) - # Determine whether the default compiler uses glibc. - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - #if __GLIBC__ >= 2 - LIBC=gnu - #else - LIBC= - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - # GNU/FreeBSD systems have a "k" prefix to indicate we are using - # FreeBSD's kernel, but not the complete OS. - case ${LIBC} in gnu) kernel_only='k' ;; esac - echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} - exit 0 ;; + exit ;; + *:FreeBSD:*:*) + case ${UNAME_MACHINE} in + pc98) + echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin - exit 0 ;; + exit ;; i*:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 - exit 0 ;; + exit ;; + i*:MSYS_NT-*:*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 - exit 0 ;; - x86:Interix*:[34]*) - echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' - exit 0 ;; + exit ;; + x86:Interix*:[345]*) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + EM64T:Interix*:[345]*) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks - exit 0 ;; + exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix - exit 0 ;; + exit ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin - exit 0 ;; + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin - exit 0 ;; + exit ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; *:GNU:*:*) + # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit 0 ;; + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix - exit 0 ;; + exit ;; arm*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; cris:Linux:*:*) echo cris-axis-linux-gnu - exit 0 ;; + exit ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; mips:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c @@ -832,8 +865,12 @@ EOF #endif #endif EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^CPU/{ + s: ::g + p + }'`" + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; mips64:Linux:*:*) eval $set_cc_for_build @@ -851,15 +888,22 @@ EOF #endif #endif EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^CPU/{ + s: ::g + p + }'`" + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; + or32:Linux:*:*) + echo or32-unknown-linux-gnu + exit ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu - exit 0 ;; + exit ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-gnu - exit 0 ;; + exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; @@ -873,7 +917,7 @@ EOF objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit 0 ;; + exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in @@ -881,25 +925,28 @@ EOF PA8*) echo hppa2.0-unknown-linux-gnu ;; *) echo hppa-unknown-linux-gnu ;; esac - exit 0 ;; + exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-gnu - exit 0 ;; + exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux - exit 0 ;; + exit ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu + exit ;; x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu - exit 0 ;; + exit ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent @@ -917,15 +964,15 @@ EOF ;; a.out-i386-linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit 0 ;; + exit ;; coff-i386) echo "${UNAME_MACHINE}-pc-linux-gnucoff" - exit 0 ;; + exit ;; "") # Either a pre-BFD a.out linker (linux-gnuoldld) or # one that does not give us useful --help. echo "${UNAME_MACHINE}-pc-linux-gnuoldld" - exit 0 ;; + exit ;; esac # Determine whether the default compiler is a.out or elf eval $set_cc_for_build @@ -942,23 +989,33 @@ EOF LIBC=gnulibc1 # endif #else - #ifdef __INTEL_COMPILER + #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__sun) LIBC=gnu #else LIBC=gnuaout #endif #endif + #ifdef __dietlibc__ + LIBC=dietlibc + #endif EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 - test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^LIBC/{ + s: ::g + p + }'`" + test x"${LIBC}" != x && { + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit + } + test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 - exit 0 ;; + exit ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... @@ -966,24 +1023,27 @@ EOF # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit 0 ;; + exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx - exit 0 ;; + exit ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop - exit 0 ;; + exit ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos - exit 0 ;; + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) echo i386-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit 0 ;; + exit ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then @@ -991,15 +1051,16 @@ EOF else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi - exit 0 ;; - i*86:*:5:[78]*) + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit 0 ;; + exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi - exit 0 ;; + exit ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv - exit 0 ;; + exit ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv - exit 0 ;; + exit ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix - exit 0 ;; - M68*:*:R3V[567]*:*) - test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; - 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0) + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4.3${OS_REL} && exit 0 + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4 && exit 0 ;; + && { echo i486-ncr-sysv4; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 - exit 0 ;; + exit ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} - exit 0 ;; + exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 - exit 0 ;; + exit ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 - exit 0 ;; + exit ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` @@ -1091,68 +1152,72 @@ EOF else echo ns32k-sni-sysv fi - exit 0 ;; + exit ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 - exit 0 ;; + exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 - exit 0 ;; + exit ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 - exit 0 ;; + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos - exit 0 ;; + exit ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} - exit 0 ;; + exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 - exit 0 ;; + exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi - exit 0 ;; + exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos - exit 0 ;; + exit ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos - exit 0 ;; + exit ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos - exit 0 ;; + exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} - exit 0 ;; + exit ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} - exit 0 ;; + exit ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} - exit 0 ;; + exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; + exit ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; + exit ;; *:Darwin:*:*) - case `uname -p` in - *86) UNAME_PROCESSOR=i686 ;; - powerpc) UNAME_PROCESSOR=powerpc ;; + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit 0 ;; + exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then @@ -1160,22 +1225,25 @@ EOF UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit 0 ;; + exit ;; *:QNX:*:4*) echo i386-pc-qnx - exit 0 ;; - NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*) + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} - exit 0 ;; + exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux - exit 0 ;; + exit ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv - exit 0 ;; + exit ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit 0 ;; + exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 @@ -1186,28 +1254,47 @@ EOF UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 - exit 0 ;; + exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 - exit 0 ;; + exit ;; *:TENEX:*:*) echo pdp10-unknown-tenex - exit 0 ;; + exit ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 - exit 0 ;; + exit ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 - exit 0 ;; + exit ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 - exit 0 ;; + exit ;; *:ITS:*:*) echo pdp10-unknown-its - exit 0 ;; + exit ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} - exit 0 ;; + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 @@ -1239,7 +1326,7 @@ main () #endif #if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix"); exit (0); + printf ("arm-acorn-riscix\n"); exit (0); #endif #if defined (hp300) && !defined (hpux) @@ -1328,11 +1415,12 @@ main () } EOF -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } # Apollos put the system type in the environment. -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } # Convex versions that predate uname can use getsysinfo(1) @@ -1341,22 +1429,22 @@ then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd - exit 0 ;; + exit ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi - exit 0 ;; + exit ;; c34*) echo c34-convex-bsd - exit 0 ;; + exit ;; c38*) echo c38-convex-bsd - exit 0 ;; + exit ;; c4*) echo c4-convex-bsd - exit 0 ;; + exit ;; esac fi @@ -1367,7 +1455,9 @@ This script, last modified $timestamp, h the operating system you are using. It is advised that you download the most up to date version of the config scripts from - ftp://ftp.gnu.org/pub/gnu/config/ + http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess +and + http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub If the version you run ($0) is already up to date, please send the following data and any information you think might be --- /dev/null +++ ifhp-3.5.20/t.p @@ -0,0 +1,27 @@ + ifhp.conf.in | 6 +----- + 1 files changed, 1 insertions(+), 5 deletions(-) + +diff --git a/ifhp.conf.in b/ifhp.conf.in +index 604f7b9..c73864d 100644 +--- a/ifhp.conf.in ++++ b/ifhp.conf.in +@@ -2066,10 +2066,6 @@ pjl_except=[ + + # PRINTER % - HP LaserJet 6 Family, Hp LaserJet {/hp(.*)/$1/} + [ hp6l hp1100 ] +-tc=hp4l +-status +-pjl +-gs_options=r600x600 + pjl_except=[ + EOJ JOB OPMSG RDYMSG STMSG + FSAPPEND FSDIRLIST FSQUERY FSUPLOAD FSDELETE FSDOWNLOAD FSINIT FSMKDIR +@@ -5323,7 +5319,7 @@ gs_options= + # PRINTER gs_ljet4 - Oki OL410ex LED printer 300dpi or 600dpi + + [ gs_ljet4 ] +-tc=pcl_gs ++# tc=pcl_gs + gs_device=ljet4 + gs_options= + --- /dev/null +++ ifhp-3.5.20/po/sv.po @@ -0,0 +1,47 @@ +# Translators, if you are not familiar with the PO format, gettext +# documentation is worth reading, especially sections dedicated to +# this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# Some information specific to po-debconf are available at +# /usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans +# Developers do not need to manually edit POT or PO files. +# , fuzzy +# +# +msgid "" +msgstr "" +"Project-Id-Version: ifhp 3.5.20-4\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2003-01-04 23:17-0800\n" +"PO-Revision-Date: 2005-10-04 23:01+0200\n" +"Last-Translator: Daniel Nylander \n" +"Language-Team: Swedish \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=iso-8859-1\n" +"Content-Transfer-Encoding: 8bit" + +#. Description +#: ../templates:3 +msgid "Location of filters has changed." +msgstr "Lagringsplatsen för filtren har ändrats." + +#. Description +#: ../templates:3 +msgid "" +"The location of the filters has been changed from /usr/lib/filters to /usr/" +"lib/ifhp so as to comply with Debian policy (FHS-2.2 sec 4.7)." +msgstr "" +"Lagringsplatsen för filtren har ändrats från /usr/lib/filters till /usr/" +"lib/ifhp för att följa Debian-policyn (FHS-2.2 sektion 4.7)." + +#. Description +#: ../templates:3 +msgid "" +"Please modify your printcap file to reflect the new path to ifhp: /usr/lib/" +"ifhp/ifhp" +msgstr "" +"Vänligen modifiera din printcap-fil för att passa den nya sökvägen till ifhp: /usr/lib/" +"ifhp/ifhp" + --- /dev/null +++ ifhp-3.5.20/po/cs.po @@ -0,0 +1,46 @@ +# +# Translators, if you are not familiar with the PO format, gettext +# documentation is worth reading, especially sections dedicated to +# this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# +# Some information specific to po-debconf are available at +# /usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans +# +# Developers do not need to manually edit POT or PO files. +# +msgid "" +msgstr "" +"Project-Id-Version: ifhp 3.5.20-1\n" +"POT-Creation-Date: 2003-01-04 23:17-0800\n" +"PO-Revision-Date: 2005-06-20 15:07+0200\n" +"Last-Translator: Martin Sin \n" +"Language-Team: Czech \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=utf-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Description +#: ../templates:3 +msgid "Location of filters has changed." +msgstr "UmístÄ›ní souborů s filtry se zmÄ›nilo." + +#. Description +#: ../templates:3 +msgid "" +"The location of the filters has been changed from /usr/lib/filters to /usr/" +"lib/ifhp so as to comply with Debian policy (FHS-2.2 sec 4.7)." +msgstr "" +"UmístÄ›ní souborů s filtry se zmÄ›nilo z /usr/lib/filters na /usr/lib/ifhp, " +"tak aby to vyhovovalo politice Debianu (FHS-2.2 odstavec 4.7)." + +#. Description +#: ../templates:3 +msgid "" +"Please modify your printcap file to reflect the new path to ifhp: /usr/lib/" +"ifhp/ifhp" +msgstr "" +"Upravte prosím svůj soubor printcap tak, aby odpovídal novému umístÄ›ní ifhp: " +"/usr/lib/ifhp/ifhp." --- ifhp-3.5.20.orig/src/ifhp.c +++ ifhp-3.5.20/src/ifhp.c @@ -3099,9 +3099,12 @@ int Font_download( char* prefix, char *i int len = strlen(Jobname), i; for( i = 0; i < len; ++i ){ int c = cval(Jobname+i); - if( !isspace(c) && !isalnum(c) ){ + if( isspace(c) || !isalnum(c) ){ Jobname[i] = '_'; } + if( isupper(c) ){ + Jobname[i] = tolower(c); + } } } DEBUG2("Pjl_displayname: fixed Jobname '%s'", Jobname); @@ -4394,7 +4397,7 @@ void Send_job() DEBUG2( "Send_job: file_util_path '%s'", file_util ); file_result[0] = 0; Use_file_util(file_util, file_result, sizeof(file_result) ); - if( !ISNULL(file_result) ) language = file_result; + if( file_result[0] != 0 ) language = file_result; } if( ISNULL(language) ){ /* defaults */ --- ifhp-3.5.20.orig/src/plp_snprintf.c +++ ifhp-3.5.20/src/plp_snprintf.c @@ -923,7 +923,7 @@ fmtquad( char **buffer, int *left, } convert[2*i] = 0; - place = safestrlen(convert); + place = strlen(convert); padlen = len - place; if( padlen < 0 ) padlen = 0; if( ljust ) padlen = -padlen; @@ -981,13 +981,13 @@ fmtdouble( char **buffer, int *left, if( ljust ) mystrcat(formatstr, "-" ); /* 1 */ if( zpad ) mystrcat(formatstr, "0" ); /* 1 */ if( len >= 0 ){ - sprintf( formatstr+safestrlen(formatstr), "%d", len ); /* 3 */ + sprintf( formatstr+strlen(formatstr), "%d", len ); /* 3 */ } if( precision >= 0 ){ - sprintf( formatstr+safestrlen(formatstr), ".%d", precision ); /* 3 */ + sprintf( formatstr+strlen(formatstr), ".%d", precision ); /* 3 */ } /* format string will be at most 10 chars long ... */ - sprintf( formatstr+safestrlen(formatstr), "%c", fmt ); + sprintf( formatstr+strlen(formatstr), "%c", fmt ); /* this is easier than trying to do the portable dtostr */ /* fprintf(stderr,"format string '%s'\n", formatstr); */ sprintf( convert, formatstr, value ); --- ifhp-3.5.20.orig/src/snmp_printer_status +++ ifhp-3.5.20/src/snmp_printer_status @@ -1,4 +1,4 @@ -#!/usr/local/bin/perl +#!/usr/bin/perl # # usage: # check_printer_status [-v][-h ipaddr][-m model][-f config ] @@ -46,7 +46,7 @@ use FileHandle; $| = 1; # config file containing printer-specific information -my $config="/usr/libexec/filters/snmp_printer_status.conf"; +my $config="/usr/lib/ifhp/snmp_printer_status.conf"; # other variables my $host; --- ifhp-3.5.20.orig/src/Makefile.in +++ ifhp-3.5.20/src/Makefile.in @@ -107,9 +107,6 @@ install: all for i in $(COMMANDS) $(INSTALL) $(UTILITIES) ; do \ $(INSTALLCMD) -m 755 $$i ${DESTDIR}$(FILTER_DIR)/`basename $$i`; \ done ; \ - for i in $(UTILITIES) ; do \ - $(INSTALLCMD) -m 755 $$i ${DESTDIR}$(bindir)/`basename $$i`; \ - done ; \ for i in $(DATAFILES) ; do \ $(INSTALLCMD) -m 644 ${SRC}/$$i ${DESTDIR}$(FILTER_DIR)/`basename $$i`; \ done ; debian/compat0000644000000000000000000000000211430536250010363 0ustar 7