jailer-0.4.orig/ 0040755 0001750 0001750 00000000000 07651066332 011724 5 ustar jfs jfs jailer-0.4.orig/CVS/ 0040755 0001750 0001750 00000000000 07403165321 012350 5 ustar jfs jfs jailer-0.4.orig/CVS/Root 0100644 0001750 0001750 00000000046 07403163011 013205 0 ustar jfs jfs :pserver:scott@tudor.balabit:/var/cvs
jailer-0.4.orig/CVS/Repository 0100644 0001750 0001750 00000000007 07403163011 014436 0 ustar jfs jfs jailer
jailer-0.4.orig/CVS/Entries 0100644 0001750 0001750 00000000755 07403165321 013710 0 ustar jfs jfs /AUTHORS/1.2/Tue Jun 19 20:09:17 2001//
/ChangeLog/1.6/Sun Sep 16 18:02:46 2001//
/NEWS/1.1/Tue Apr 24 13:42:50 2001//
/README/1.6/Fri Oct 19 14:13:07 2001//
/TODO/1.2/Wed Jun 20 10:05:33 2001//
/autogen.sh/1.1/Tue Apr 24 13:42:50 2001//
/configure.in/1.4/Sun Sep 16 18:02:46 2001//
/jailer.conf/1.6/Sun Sep 16 18:02:46 2001//
/jailer.pl/1.13/Fri Aug 10 13:46:08 2001//
/updatejail/1.3/Tue Dec 4 14:47:26 2001//
D/config////
D/debian////
D/doc////
/Makefile.am/1.8/Tue Dec 4 15:20:12 2001//
jailer-0.4.orig/doc/ 0040755 0001750 0001750 00000000000 07651066331 012470 5 ustar jfs jfs jailer-0.4.orig/doc/CVS/ 0040755 0001750 0001750 00000000000 07403163213 013113 5 ustar jfs jfs jailer-0.4.orig/doc/CVS/Root 0100644 0001750 0001750 00000000046 07403163012 013753 0 ustar jfs jfs :pserver:scott@tudor.balabit:/var/cvs
jailer-0.4.orig/doc/CVS/Repository 0100644 0001750 0001750 00000000013 07403163012 015201 0 ustar jfs jfs jailer/doc
jailer-0.4.orig/doc/CVS/Entries 0100644 0001750 0001750 00000000213 07403163213 014440 0 ustar jfs jfs /Makefile/1.2/Tue Dec 4 14:59:49 2001//
/Makefile.am/1.1/Tue Dec 4 14:58:07 2001//
/Makefile.in/1.1/Tue Dec 4 14:58:07 2001//
D/man////
jailer-0.4.orig/doc/man/ 0040755 0001750 0001750 00000000000 07651066331 013243 5 ustar jfs jfs jailer-0.4.orig/doc/man/CVS/ 0040755 0001750 0001750 00000000000 07403353617 013677 5 ustar jfs jfs jailer-0.4.orig/doc/man/CVS/Root 0100644 0001750 0001750 00000000046 07403163012 014526 0 ustar jfs jfs :pserver:scott@tudor.balabit:/var/cvs
jailer-0.4.orig/doc/man/CVS/Repository 0100644 0001750 0001750 00000000017 07403163012 015760 0 ustar jfs jfs jailer/doc/man
jailer-0.4.orig/doc/man/CVS/Entries 0100644 0001750 0001750 00000000407 07403353617 015231 0 ustar jfs jfs /Makefile/1.2/Tue Dec 4 14:59:49 2001//
/Makefile.am/1.1/Tue Dec 4 14:58:07 2001//
/Makefile.in/1.1/Tue Dec 4 14:58:07 2001//
/jailer.conf.5/1.1/Tue Dec 4 14:58:07 2001//
/updatejail.8/1.1/Tue Dec 4 14:58:07 2001//
/jailer.8/1.2/Wed Dec 5 08:14:44 2001//
D
jailer-0.4.orig/doc/man/jailer.conf.5 0100644 0001750 0001750 00000003766 07403162177 015534 0 ustar jfs jfs .\" Copyright (c) 2001 BalaBit IT Ltd.
.TH JAILER 8 "December 4, 2001"
.SH NAME
jailer.conf \- configuration file of jailer
.SH SYNOPSIS
jailer.conf
.SH DESCRIPTION
.I jailer
is a script for creating chrooted enviroments for debian packages.
.I jailer.conf
is the configuration of jailer.conf
Every config starts and ands with a jail identifyer,
which sould be
.I uniq
and
.I be in brackets.
.TP
.B
For instance an apache chroot identifier should look like this:
.TP
.B
Of course you should finish the identifier
Between these identifiers configuration should contain
the following lines:
.TP
.B Root: /var/chroot/apache
This line describes the
.B PATH
of the chrooted enviroment.
.TP
.B Conf:
This line describes the
.B PATH
or
.B PATH/filename
which should copy to the chrooted enviroment. For
example
.B Conf: /etc/apache/*
, which uses a wildcard.
.TP
.B Debs:
This line contains the name of those
.B deb
packages which should be installed into the chrooted enviroment.
.TP
.B Junk-Debs:
This line contains those
.B deb
packages which should not to be installed into rhe chrooted enviroment.
.TP
.B Junk:
This line contains those
.B files
or
.B directories
which should not to be installed. For example
.B /lib/*
means all files and links under /lib should not be installed, while
.B /lib/libconsole.so.0.0.0
means a file which should not to be installed.
.TP
.B Extra:
This line contains tose files or directories which should
be installed into the chrooted enviroment, like
.B /var/run
means a directory, which is needed for the chrooted service.
.SH WARNING
Do not configure your daemon inside your jail, because
.I updatejail
script will wipe out all the data inside the jail. If you would
like to change any setting inside the jail, do it at your
original place and than run
.I updatejail
. This makes it possible to place a jail even to a ramdisk.
.SH SEEL ALSO
updatejail(8) jailer.conf(5), dpkg(8)
.SH AUTHOR
This manual page was written by Péter Höltzl .
jailer-0.4.orig/doc/man/updatejail.8 0100644 0001750 0001750 00000002134 07403162177 015453 0 ustar jfs jfs .\" Copyright (c) 2001 BalaBit IT Ltd.
.TH JAILER 8 "December 4, 2001"
.SH NAME
updatejail \- is a script for rebuilding a chrooted enviroment
.SH SYNOPSIS
updatejail
.SH DESCRIPTION
.I updatejail
is a script which whipes out a chroot enviroment and
rebuilds it. By default it leaves /dev/log device
in the chroot, so you do not need to restart system
logger after updateing a jail.
.SH WARNING
Do not configure your daemon inside your jail, because
.I updatejail
script will wipe out all the data inside the jail. If you would
like to change any setting inside the jail, do it at your
original place and than run
.I updatejail
. This makes it possible to place a jail even to a ramdisk.
.SH Options
.TP
.B
configuration file which contains settings of the new chrooted enviroment.
For further information see
.I man 8 jailer.conf
.TP
.B
identifier which determines which jail is to be created from
.I jailer.conf
.SH SEEL ALSO
updatejail(8) jailer.conf(5),
.SH AUTHOR
This manual page was written by Péter Höltzl .
jailer-0.4.orig/doc/man/Makefile.am 0100644 0001750 0001750 00000000112 07403162177 015266 0 ustar jfs jfs
man_MANS = jailer.8 jailer.conf.5 updatejail.8
EXTRA_DIST = $(man_MANS)
jailer-0.4.orig/doc/man/Makefile.in 0100644 0001750 0001750 00000015336 07403162177 015315 0 ustar jfs jfs # Makefile.in generated automatically by automake 1.4 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ../..
ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
MAKEINFO = @MAKEINFO@
PACKAGE = @PACKAGE@
VERSION = @VERSION@
man_MANS = jailer.8 jailer.conf.5 updatejail.8
EXTRA_DIST = $(man_MANS)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_CLEAN_FILES =
man5dir = $(mandir)/man5
man8dir = $(mandir)/man8
MANS = $(man_MANS)
NROFF = nroff
DIST_COMMON = Makefile.am Makefile.in
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/man/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
cd $(top_builddir) \
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
install-man5:
$(mkinstalldirs) $(DESTDIR)$(man5dir)
@list='$(man5_MANS)'; \
l2='$(man_MANS)'; for i in $$l2; do \
case "$$i" in \
*.5*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
else file=$$i; fi; \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man5dir)/$$inst"; \
$(INSTALL_DATA) $$file $(DESTDIR)$(man5dir)/$$inst; \
done
uninstall-man5:
@list='$(man5_MANS)'; \
l2='$(man_MANS)'; for i in $$l2; do \
case "$$i" in \
*.5*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " rm -f $(DESTDIR)$(man5dir)/$$inst"; \
rm -f $(DESTDIR)$(man5dir)/$$inst; \
done
install-man8:
$(mkinstalldirs) $(DESTDIR)$(man8dir)
@list='$(man8_MANS)'; \
l2='$(man_MANS)'; for i in $$l2; do \
case "$$i" in \
*.8*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
else file=$$i; fi; \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst"; \
$(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst; \
done
uninstall-man8:
@list='$(man8_MANS)'; \
l2='$(man_MANS)'; for i in $$l2; do \
case "$$i" in \
*.8*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " rm -f $(DESTDIR)$(man8dir)/$$inst"; \
rm -f $(DESTDIR)$(man8dir)/$$inst; \
done
install-man: $(MANS)
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-man5 install-man8
uninstall-man:
@$(NORMAL_UNINSTALL)
$(MAKE) $(AM_MAKEFLAGS) uninstall-man5 uninstall-man8
tags: TAGS
TAGS:
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
subdir = doc/man
distdir: $(DISTFILES)
here=`cd $(top_builddir) && pwd`; \
top_distdir=`cd $(top_distdir) && pwd`; \
distdir=`cd $(distdir) && pwd`; \
cd $(top_srcdir) \
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu doc/man/Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
if test -d $$d/$$file; then \
cp -pr $$d/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
info-am:
info: info-am
dvi-am:
dvi: dvi-am
check-am: all-am
check: check-am
installcheck-am:
installcheck: installcheck-am
install-exec-am:
install-exec: install-exec-am
install-data-am: install-man
install-data: install-data-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-am
uninstall-am: uninstall-man
uninstall: uninstall-am
all-am: Makefile $(MANS)
all-redirect: all-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs:
$(mkinstalldirs) $(DESTDIR)$(mandir)/man5 $(DESTDIR)$(mandir)/man8
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
mostlyclean-am: mostlyclean-generic
mostlyclean: mostlyclean-am
clean-am: clean-generic mostlyclean-am
clean: clean-am
distclean-am: distclean-generic clean-am
distclean: distclean-am
maintainer-clean-am: maintainer-clean-generic distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-am
.PHONY: install-man5 uninstall-man5 install-man8 uninstall-man8 \
install-man uninstall-man tags distdir info-am info dvi-am dvi check \
check-am installcheck-am installcheck install-exec-am install-exec \
install-data-am install-data install-am install uninstall-am uninstall \
all-redirect all-am all installdirs mostlyclean-generic \
distclean-generic clean-generic maintainer-clean-generic clean \
mostlyclean distclean maintainer-clean
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
jailer-0.4.orig/doc/man/jailer.8 0100644 0001750 0001750 00000002073 07403353564 014603 0 ustar jfs jfs .\" Copyright (c) 2001 BalaBit IT Ltd.
.TH JAILER 8 "December 4, 2001"
.SH NAME
jailer \- jailer is a script for creating jails from deban packages
.SH SYNOPSIS
jailer
.SH DESCRIPTION
.I jailer
is a script for creating chrooted enviroments for debian packages.
Jailer deals only with debian packages, which sould be installed
to your debian system.
.SH WARNING
Do not configure your daemon inside your jail, because
.I updatejail
script will wipe out all the data inside the jail. If you would
like to change any setting inside the jail, do it at your
original place and than run
.I updatejail
. This makes it possible to place a jail even to a ramdisk.
.SH Options
.TP
.B
configuration file which contains settings of the new chrooted enviroment.
For further information see
.I man 8 jailer.conf
.TP
.B
identifier which determines which jail is to be created from
.I jailer.conf
.SH SEEL ALSO
updatejail(8) jailer.conf(5),
.SH AUTHOR
This manual page was written by Péter Höltzl .
jailer-0.4.orig/doc/Makefile.am 0100644 0001750 0001750 00000000015 07403162177 014515 0 ustar jfs jfs SUBDIRS = man jailer-0.4.orig/doc/Makefile.in 0100644 0001750 0001750 00000020310 07403162177 014526 0 ustar jfs jfs # Makefile.in generated automatically by automake 1.4 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
CC = @CC@
MAKEINFO = @MAKEINFO@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
VERSION = @VERSION@
SUBDIRS = man
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = ../config.h
CONFIG_CLEAN_FILES =
DIST_COMMON = Makefile.am Makefile.in
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
cd $(top_builddir) \
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
@SET_MAKE@
all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
rev="$$subdir $$rev"; \
test "$$subdir" = "." && dot_seen=yes; \
done; \
test "$$dot_seen" = "no" && rev=". $$rev"; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
here=`pwd` && cd $(srcdir) \
&& mkid -f$$here/ID $$unique $(LISP)
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
mostlyclean-tags:
clean-tags:
distclean-tags:
-rm -f TAGS ID
maintainer-clean-tags:
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
subdir = doc
distdir: $(DISTFILES)
here=`cd $(top_builddir) && pwd`; \
top_distdir=`cd $(top_distdir) && pwd`; \
distdir=`cd $(distdir) && pwd`; \
cd $(top_srcdir) \
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu doc/Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
if test -d $$d/$$file; then \
cp -pr $$d/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
for subdir in $(SUBDIRS); do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
chmod 777 $(distdir)/$$subdir; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
|| exit 1; \
fi; \
done
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-exec-am:
install-exec: install-exec-recursive
install-data-am:
install-data: install-data-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am:
uninstall: uninstall-recursive
all-am: Makefile
all-redirect: all-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
mostlyclean-am: mostlyclean-tags mostlyclean-generic
mostlyclean: mostlyclean-recursive
clean-am: clean-tags clean-generic mostlyclean-am
clean: clean-recursive
distclean-am: distclean-tags distclean-generic clean-am
distclean: distclean-recursive
maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-recursive
.PHONY: install-data-recursive uninstall-data-recursive \
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
uninstalldirs-recursive all-recursive check-recursive \
installcheck-recursive info-recursive dvi-recursive \
mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-am install-data install-am install \
uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
jailer-0.4.orig/NEWS 0100644 0001750 0001750 00000000065 07271301332 012407 0 ustar jfs jfs Version 0.1,
Initial version released under the GPL
jailer-0.4.orig/TODO 0100644 0001750 0001750 00000000000 07314072555 012377 0 ustar jfs jfs jailer-0.4.orig/updatejail 0100755 0001750 0001750 00000001520 07403160776 013771 0 ustar jfs jfs #!/bin/sh
#
#
#
KEEP="/dev/log
"
if [ Q$1 == "Q" -o Q$2 == "Q" ]
then
echo "Usage: upratejail "
else
JAIL=`cat $1 | grep Root: | grep $2 | awk '{print $2}'`
echo "jail: " $JAIL
echo "config: " $1
read
if test -d $JAIL
then
cd $JAIL
find $JAIL -type b > /tmp/$$.updatejail
find $JAIL -type c >> /tmp/$$.updatejail
find $JAIL -type p >> /tmp/$$.updatejail
find $JAIL -type f >> /tmp/$$.updatejail
find $JAIL -type l >> /tmp/$$.updatejail
find $JAIL -type s >> /tmp/$$.updatejail
for i in `echo $KEEP`
do
cat /tmp/$$.updatejail | grep -v $JAIL$i > /tmp/$$.updatejail.tmp
mv /tmp/$$.updatejail.tmp /tmp/$$.updatejail
done
for i in `cat /tmp/$$.updatejail`
do
rm $i
done
rm /tmp/$$.updatejail
/usr/sbin/jailer.pl $1 $2
else
echo "This jail does not exist!"
fi
fi
jailer-0.4.orig/a.out 0100644 0001750 0001750 00000000000 07403164273 012656 0 ustar jfs jfs jailer-0.4.orig/aclocal.m4 0100644 0001750 0001750 00000006723 07403163167 013570 0 ustar jfs jfs dnl aclocal.m4 generated automatically by aclocal 1.4
dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl This program is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
dnl PARTICULAR PURPOSE.
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.
# serial 1
dnl Usage:
dnl AM_INIT_AUTOMAKE(package,version, [no-define])
AC_DEFUN(AM_INIT_AUTOMAKE,
[AC_REQUIRE([AC_PROG_INSTALL])
PACKAGE=[$1]
AC_SUBST(PACKAGE)
VERSION=[$2]
AC_SUBST(VERSION)
dnl test to see if srcdir already configured
if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
ifelse([$3],,
AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
AC_REQUIRE([AM_SANITY_CHECK])
AC_REQUIRE([AC_ARG_PROGRAM])
dnl FIXME This is truly gross.
missing_dir=`cd $ac_aux_dir && pwd`
AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
AC_REQUIRE([AC_PROG_MAKE_SET])])
#
# Check to make sure that the build environment is sane.
#
AC_DEFUN(AM_SANITY_CHECK,
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
if test "[$]*" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftestfile`
fi
if test "[$]*" != "X $srcdir/configure conftestfile" \
&& test "[$]*" != "X conftestfile $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
alias in your environment])
fi
test "[$]2" = conftestfile
)
then
# Ok.
:
else
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
rm -f conftest*
AC_MSG_RESULT(yes)])
dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
dnl The program must properly implement --version.
AC_DEFUN(AM_MISSING_PROG,
[AC_MSG_CHECKING(for working $2)
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if ($2 --version) < /dev/null > /dev/null 2>&1; then
$1=$2
AC_MSG_RESULT(found)
else
$1="$3/missing $2"
AC_MSG_RESULT(missing)
fi
AC_SUBST($1)])
jailer-0.4.orig/README 0100644 0001750 0001750 00000007257 07364032363 012612 0 ustar jfs jfs This little script aims to help sysadmins to create and maintain chrooted enviroments.
How to use?
The script reads the configuration from a file, which must be specified in the command-line. In the config file you can list all of your chrooted enviroments, eg. jails. The script prases the config file and than generates or regenerates the jail. An option is to specify a jail to generate on command-line.
./jailer.pl config-file [jail-to-build]
Only one jail can be specifyed!
The config file has two big part. One is for the general rules, and the other is for each jail.
For the general part:
-- * --
Debs: deb1 deb2 deb3
Junk: /junk1 /junk2 /ju/nk/3
Junk-Debs: deb1 deb2 deb3
Extra: /ex/tr/a/1/* /extra2 /extr/a3
Links: /file1<=>/link1 /fil/e2<=>/lin/k2
-- * --
The general rules ara used in all of the jail. This way you have to specify common things only once.
The jails part:
-- * --
Root: /path/to/the/root1
Debs: deb1 deb2 deb3
Junk: /junk1 /junk2 /ju/nk/3
Junk-Debs: deb1 deb2 deb3
Extra: /ex/tr/a/1/* /extra2 /extr/a3
Links: /file1<=>/link1 /fil/e2<=>/lin/k2
Conf: /etc/my/*
Root: /path/to/the/root2
Debs: deb1 deb2 deb3
Junk: /junk1 /junk2 /ju/nk/3
Junk-Debs: deb1 deb2 deb3
Extra: /ex/tr/a/1/* /extra2 /extr/a3
Links: /file1<=>/link1 /fil/e2<=>/lin/k2
Conf: /etc/my.conf
-- * --
The name of the jail (eg. jail1, jail2) does not metter, it is only for you.
How does it work?
Root: the root of the specified jail.
Debs: the deb files you want to have in the specified jail. You do not have to specify the depedencies, the program will take care of them.
Junk-Debs: the deb files which are needed by the jail(depedency), but you do not want them to be used.
Junk: From the deb list the program creates a file list, here you can specify the unwanted(junk) files. You must use the full path name. (NOTE: If you specify /bin/foo/* than /bin/foo/bar is also selected.)
Extra: Here you can specify additional files, which you want to use in the jail. Use globbing!
Links: Here you can specify symlinks to create in the jail. Usefull for the alternative system. (eg: /usr/bin/perl-5.005<=>/usr/bin/perl)
Conf: You can specify the deault config files to copy in the jail, if file already exist in jail, nothing is coppied!
NOTE: the script works only on debian, while it uses the /var/lib/dpkg/available and the /var/lib/dpkg/info/*.list files!!!
NOTE: You need cpio to run successfully jailer, and of course perl :)
The field separator is a space. (NOTE: If you do not need any of the option delete it, do not leave empty!)
Feedbacks, bugs, comments are welcome!
Marton Illes
marci@balabit.hu
Living example:
-- * --
Junk: /usr/doc/* /usr/man/* /usr/share/man/* /usr/share/doc/* /etc/init.d/* /usr/share/zoneinfo/* /sbin/ldconfig.new /etc/*
Root: /var/chroot/ntp
Debs: ntp
Conf: /etc/ntp.conf
Extra: /dev/null /etc/hosts /etc/resolv.conf /etc/nsswitch.conf
Junk: /usr/doc/* /usr/man/* /usr/share/man/* /usr/share/doc/* /etc/init.d/* /usr/share/zoneinfo/* /sbin/ldconfig.new /etc/*
Root: /var/chroot/bind
Conf: /etc/bind/*
Debs: bind
Junk-Debs: tcpd arpd
Extra: /dev/null /dev/log
Junk: /usr/share/* /sbin/* /usr/sbin/arp /usr/sbin/arping /usr/sbin/inetd /usr/sbin/ipautofw /usr/sbin/ipmasqadm /usr/sbin/tzconfig /usr/sbin/update-inetd /usr/sbin/zic /usr/lib/* /bin/* /usr/bin/tzselect /usr/bin/ldd /usr/bin/getent /usr/bin/zdump /lib/libwrap* /lib/libm* /lib/libcrypt* /lib/libthread* /lib/libutil* /lib/librt* /lib/libpthread* /lib/libnss* /lib/libdb* /lib/libdl* /lib/libBrokenLocale* /lib/libnsl* /lib/libSegFault* /lib/libresolv* /usr/sbin/iconv /usr/sbin/local /usr/bin/rpc* /usr/bin/trace*
jailer-0.4.orig/jailer.pl 0100755 0001750 0001750 00000014665 07334762640 013546 0 ustar jfs jfs #!/usr/bin/perl
#
# Copyright (c) 2001 BalaBit IT Ltd.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# $Id: jailer.pl,v 1.13 2001/08/10 13:46:08 marci Exp $
#
# Simple perl script to generate and maintain chrooted enviroments(jails).
use strict;
sub get_config {
my ($conffile) = @_;
my %co;
my @jails;
my @config;
my $block = 0;
my $block_id;
my $lineno = 0;
my %gen = {};
open(F,"<$conffile") || die "No config file by the name $conffile\n";
while () {
chomp;
if (/^#/) {
next;
}
elsif (!$block && /<([\w]+)>/) {
$block = 1;
$block_id = $1;
%co = {};
$co{"jail"} = $block_id, if($block_id ne "general");
}
elsif ($block && /<\/?([\w]+)>/) {
push(@config, {%co}), if($block_id ne "general");
%gen = %co, if($block_id eq "general");
$block = 0;
$block_id = '';
}
elsif ($block) {
# process a line
if (/^Root:\s*(.+)/i) {
$co{"root"} = $1;
}
elsif (/^Debs:\s*(.+)/i) {
$co{"debs"} = $1;
}
elsif (/^Junk:\s*(.+)/i) {
$co{"junk"} = $1;
}
elsif (/^Junk-Debs:\s*(.+)/i) {
$co{"junk-debs"} = $1;
}
elsif (/^Extra:\s*(.+)/i) {
$co{"extra"} = $1;
}
elsif (/^Links:\s*(.+)/i) {
$co{"links"} = $1;
}
elsif (/^Conf:\s*(.+)/i) {
$co{"conf"} = $1;
}
}
elsif (!/\s*/) {
print "junk at line $lineno\n";
exit 1;
}
$lineno++;
}
close(F);
if (%gen) {
foreach (@config) {
my $key;
#Adding general rules
if ($_->{"jail"} ne "general") {
foreach $key (keys %gen) {
$_->{$key} .= " " . $gen{$key};
}
}
}
}
return (@config);
}
sub get_deps {
my (@debs) = @_;
my %deps;
my ($br, $i, @b);
undef $/;
open(F, ";
close(F);
foreach (@debs) {
s/\+/\\\+/g;
s/\./\\\./g;
if ($available =~ m/(Package: $_\n(.+\n)+)/) {
my $tmp = $1;
if ($tmp =~ /Depends/g) {
$tmp =~ /Depends: (.*)/;
my @b = split(", ", $1);
foreach $br (@b) {
if ($br =~ /\|/g) {
foreach $i (split(' \| ', $br)) {
$i =~ /^([a-z\d\-\+\.]+).*$/;
$deps{"$1"} = 1;
}
} else {
$br =~ /^([a-z\d\-\+\.]+).*$/;
$deps{"$1"} = 1;
}
}
}
}
}
return (keys %deps);
}
sub get_all_deps {
my (%debs) = @_;
my $num;
while ((keys %debs) > $num) {
$num = keys %debs;
foreach (get_deps(keys %debs)) {
$debs{"$_"} = 1;
}
}
return (%debs);
}
sub get_files {
my (%debs) = @_;
my $deb;
my %files;
foreach $deb (keys %debs) {
print "Using deb: $deb\n";
open(F,")) {
$files{"$_"} = 1;
}
close(F);
}
return (%files);
}
### START ###
my @config;
my $conf;
#Prase arguments and the config file
if ($#ARGV ge 0) {
print "Using config file: $ARGV[0]\n";
@config = get_config($ARGV[0]);
} else {
print STDERR "No config file is given!\n";
print "Usage:\njailer.pl conffile [jail]: Config file, jail to (re)build\n";
exit 1;
}
#Do the jails one by one
foreach $conf (@config) {
if (length($ARGV[1])) {
next, if ($conf->{"jail"} ne $ARGV[1]);
}
my $junk;
my $tmp;
my %files;
my %debs;
print "Generating \"$conf->{jail}\" jail in \"$conf->{root}\" with \"$conf->{debs}\" debs.\n";
#Get the base debs
foreach $tmp (split(" ", $conf->{"debs"})) {
$debs{"$tmp"} = 1;
}
#Get all the needed debs
%debs = get_all_deps(%debs);
#Throw out the junk
foreach $tmp (split(" ", $conf->{"junk-debs"})) {
delete $debs{"$tmp"};
}
#Get the files
%files = get_files(%debs);
#Throw out the junk
foreach $junk (split(" ", $conf->{"junk"})) {
print "Droping junk: $junk\n";
$junk =~ s/\//\\\//g;
$junk =~ s/\+/\\\+/g;
$junk =~ s/\./\\\./g;
$junk =~ s/\*/\.\*/g;
foreach (keys %files) {
delete $files{$_}, if (/^$junk$/);
}
}
#Prepare extra plus conf-files
my @conffile;
my @extrafile;
foreach (split(" ", $conf->{"extra"})) {
my $tmp_dir;
chop($tmp_dir = `dirname '$_'`);
my @tmpfile = `find $tmp_dir -path '$_'`;
push (@extrafile, $tmp_dir, @tmpfile);
}
foreach (split(" ", $conf->{"conf"})) {
my $tmp_dir;
chop($tmp_dir = `dirname '$_'`);
my @tmpfile = `find $tmp_dir -path '$_'`;
push (@conffile, $tmp_dir, @tmpfile);
}
#Start cpio in pass mode
open(CPIO, "|cpio -pd --quiet $conf->{root} 2> /dev/null");
#Add the normal files
foreach (sort(keys %files)) {
print CPIO "$_\n";
}
#Add the extra files
foreach (@extrafile) {
print CPIO "$_\n";
print "Adding extra: $_\n";
}
#Add conf files
foreach (@conffile) {
print CPIO "$_\n", if ( ! -e "$conf->{root}" . "$_");
print "Adding config files: $_\n";
}
close(CPIO);
#Generate links
foreach (split(" ", $conf->{"links"})) {
my ($base, $link) = split("<=>", $_);
if (-l ($conf->{"root"} . $link)) {
unlink ($conf->{"root"} . $link);
print "Deleting old link: $link\n";
symlink($base, $conf->{"root"} . $link);
print "Creating link $link to $base\n";
} elsif (-e ($conf->{"root"} . $link)) {
print "$link can't be deleted!\n";
} else {
symlink($base, $conf->{"root"} . $link);
print "Creating link $link to $base\n";
}
}
#Finished with this jail
print "Finished!\n";
}
jailer-0.4.orig/configure 0100755 0001750 0001750 00000106412 07403163170 013625 0 ustar jfs jfs #! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12
ac_prev=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval "$ac_prev=\$ac_option"
ac_prev=
continue
fi
case "$ac_option" in
-*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
*) ac_optarg= ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
case "$ac_option" in
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
bindir="$ac_optarg" ;;
-build | --build | --buil | --bui | --bu)
ac_prev=build ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build="$ac_optarg" ;;
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
cache_file="$ac_optarg" ;;
-datadir | --datadir | --datadi | --datad | --data | --dat | --da)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
| --da=*)
datadir="$ac_optarg" ;;
-disable-* | --disable-*)
ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
eval "enable_${ac_feature}=no" ;;
-enable-* | --enable-*)
ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "enable_${ac_feature}='$ac_optarg'" ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
| --exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
exec_prefix="$ac_optarg" ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
-help | --help | --hel | --he)
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
--cache-file=FILE cache test results in FILE
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[same as prefix]
--bindir=DIR user executables in DIR [EPREFIX/bin]
--sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
--libexecdir=DIR program executables in DIR [EPREFIX/libexec]
--datadir=DIR read-only architecture-independent data in DIR
[PREFIX/share]
--sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data in DIR
[PREFIX/com]
--localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
--libdir=DIR object code libraries in DIR [EPREFIX/lib]
--includedir=DIR C header files in DIR [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
--infodir=DIR info documentation in DIR [PREFIX/info]
--mandir=DIR man documentation in DIR [PREFIX/man]
--srcdir=DIR find the sources in DIR [configure dir or ..]
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM
run sed PROGRAM on installed program names
EOF
cat << EOF
Host type:
--build=BUILD configure for building on BUILD [BUILD=HOST]
--host=HOST configure for HOST [guessed]
--target=TARGET configure for TARGET [TARGET=HOST]
Features and packages:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--x-includes=DIR X include files are in DIR
--x-libraries=DIR X library files are in DIR
EOF
if test -n "$ac_help"; then
echo "--enable and --with options recognized:$ac_help"
fi
exit 0 ;;
-host | --host | --hos | --ho)
ac_prev=host ;;
-host=* | --host=* | --hos=* | --ho=*)
host="$ac_optarg" ;;
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
includedir="$ac_optarg" ;;
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
infodir="$ac_optarg" ;;
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir="$ac_optarg" ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
libexecdir="$ac_optarg" ;;
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst \
| --locals | --local | --loca | --loc | --lo)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* \
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
localstatedir="$ac_optarg" ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
mandir="$ac_optarg" ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
no_recursion=yes ;;
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
| --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
oldincludedir="$ac_optarg" ;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix="$ac_optarg" ;;
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
program_prefix="$ac_optarg" ;;
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
program_suffix="$ac_optarg" ;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- \
| --program-transform | --program-transfor \
| --program-transfo | --program-transf \
| --program-trans | --program-tran \
| --progr-tra | --program-tr | --program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name="$ac_optarg" ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
sbindir="$ac_optarg" ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedst | --shareds | --shared | --share | --shar \
| --sha | --sh)
ac_prev=sharedstatedir ;;
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
sharedstatedir="$ac_optarg" ;;
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir="$ac_optarg" ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
sysconfdir="$ac_optarg" ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target="$ac_optarg" ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
echo "configure generated by autoconf version 2.13"
exit 0 ;;
-with-* | --with-*)
ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "with_${ac_package}='$ac_optarg'" ;;
-without-* | --without-*)
ac_package=`echo $ac_option|sed -e 's/-*without-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
eval "with_${ac_package}=no" ;;
--x)
# Obsolete; use --with-x.
with_x=yes ;;
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
| --x-incl | --x-inc | --x-in | --x-i)
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
x_includes="$ac_optarg" ;;
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries="$ac_optarg" ;;
-*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
;;
*)
if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
echo "configure: warning: $ac_option: invalid host type" 1>&2
fi
if test "x$nonopt" != xNONE; then
{ echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
fi
nonopt="$ac_option"
;;
esac
done
if test -n "$ac_prev"; then
{ echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
exec 6>/dev/null
else
exec 6>&1
fi
exec 5>./config.log
echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5
# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
case "$ac_arg" in
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c) ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
ac_configure_args="$ac_configure_args '$ac_arg'" ;;
*) ac_configure_args="$ac_configure_args $ac_arg" ;;
esac
done
# NLS nuisances.
# Only set these to C if already set. These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}" = set; then LANG=C; export LANG; fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h
# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=jailer.pl
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then its parent.
ac_prog=$0
ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
srcdir=$ac_confdir
if test ! -r $srcdir/$ac_unique_file; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
{ echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
else
{ echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
else
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
echo "loading site script $ac_site_file"
. "$ac_site_file"
fi
done
if test -r "$cache_file"; then
echo "loading cache $cache_file"
. $cache_file
else
echo "creating cache $cache_file"
> $cache_file
fi
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
ac_exeext=
ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
ac_n= ac_c='
' ac_t=' '
else
ac_n=-n ac_c= ac_t=
fi
else
ac_n= ac_c='\c' ac_t=
fi
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f $ac_dir/install.sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
fi
done
if test -z "$ac_aux_dir"; then
{ echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:556: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
/|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
# Don't use installbsd from OSF since it installs stuff as root
# by default.
for ac_prog in ginstall scoinst install; do
if test -f $ac_dir/$ac_prog; then
if test $ac_prog = install &&
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
break 2
fi
fi
done
;;
esac
done
IFS="$ac_save_IFS"
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL="$ac_cv_path_install"
else
# As a last resort, use the slow shell script. We don't cache a
# path for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the path is relative.
INSTALL="$ac_install_sh"
fi
fi
echo "$ac_t""$INSTALL" 1>&6
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
echo "configure:609: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
if test "$*" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftestfile`
fi
if test "$*" != "X $srcdir/configure conftestfile" \
&& test "$*" != "X conftestfile $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
{ echo "configure: error: ls -t appears to fail. Make sure there is not a broken
alias in your environment" 1>&2; exit 1; }
fi
test "$2" = conftestfile
)
then
# Ok.
:
else
{ echo "configure: error: newly created file is older than distributed files!
Check your system clock" 1>&2; exit 1; }
fi
rm -f conftest*
echo "$ac_t""yes" 1>&6
if test "$program_transform_name" = s,x,x,; then
program_transform_name=
else
# Double any \ or $. echo might interpret backslashes.
cat <<\EOF_SED > conftestsed
s,\\,\\\\,g; s,\$,$$,g
EOF_SED
program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
rm -f conftestsed
fi
test "$program_prefix" != NONE &&
program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:666: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftestmake <<\EOF
all:
@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
eval ac_cv_prog_make_${ac_make}_set=yes
else
eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftestmake
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
echo "$ac_t""yes" 1>&6
SET_MAKE=
else
echo "$ac_t""no" 1>&6
SET_MAKE="MAKE=${MAKE-make}"
fi
PACKAGE=jailer
VERSION="0.3"
if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
{ echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
fi
cat >> confdefs.h <> confdefs.h <&6
echo "configure:712: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (aclocal --version) < /dev/null > /dev/null 2>&1; then
ACLOCAL=aclocal
echo "$ac_t""found" 1>&6
else
ACLOCAL="$missing_dir/missing aclocal"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
echo "configure:725: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (autoconf --version) < /dev/null > /dev/null 2>&1; then
AUTOCONF=autoconf
echo "$ac_t""found" 1>&6
else
AUTOCONF="$missing_dir/missing autoconf"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
echo "configure:738: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (automake --version) < /dev/null > /dev/null 2>&1; then
AUTOMAKE=automake
echo "$ac_t""found" 1>&6
else
AUTOMAKE="$missing_dir/missing automake"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
echo "configure:751: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (autoheader --version) < /dev/null > /dev/null 2>&1; then
AUTOHEADER=autoheader
echo "$ac_t""found" 1>&6
else
AUTOHEADER="$missing_dir/missing autoheader"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
echo "configure:764: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
MAKEINFO=makeinfo
echo "$ac_t""found" 1>&6
else
MAKEINFO="$missing_dir/missing makeinfo"
echo "$ac_t""missing" 1>&6
fi
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs. It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already. You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
case `(ac_space=' '; set | grep ac_space) 2>&1` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote substitution
# turns \\\\ into \\, and sed turns \\ into \).
sed -n \
-e "s/'/'\\\\''/g" \
-e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
;;
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
;;
esac >> confcache
if cmp -s $cache_file confcache; then
:
else
if test -w $cache_file; then
echo "updating cache $cache_file"
cat confcache > $cache_file
else
echo "not updating unwritable cache $cache_file"
fi
fi
rm -f confcache
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
fi
trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
cat > conftest.defs <<\EOF
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
s%\[%\\&%g
s%\]%\\&%g
s%\$%$$%g
EOF
DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
rm -f conftest.defs
# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}
echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS </dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.
ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
case "\$ac_option" in
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
echo "$CONFIG_STATUS generated by autoconf version 2.13"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
*) echo "\$ac_cs_usage"; exit 1 ;;
esac
done
ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"
trap 'rm -fr `echo "Makefile
config/Makefile
debian/Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@PACKAGE@%$PACKAGE%g
s%@VERSION@%$VERSION%g
s%@ACLOCAL@%$ACLOCAL%g
s%@AUTOCONF@%$AUTOCONF%g
s%@AUTOMAKE@%$AUTOMAKE%g
s%@AUTOHEADER@%$AUTOHEADER%g
s%@MAKEINFO@%$MAKEINFO%g
s%@SET_MAKE@%$SET_MAKE%g
CEOF
EOF
cat >> $CONFIG_STATUS <<\EOF
# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
if test $ac_beg -gt 1; then
sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
else
sed "${ac_end}q" conftest.subs > conftest.s$ac_file
fi
if test ! -s conftest.s$ac_file; then
ac_more_lines=false
rm -f conftest.s$ac_file
else
if test -z "$ac_sed_cmds"; then
ac_sed_cmds="sed -f conftest.s$ac_file"
else
ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
fi
ac_file=`expr $ac_file + 1`
ac_beg=$ac_end
ac_end=`expr $ac_end + $ac_max_sed_cmds`
fi
done
if test -z "$ac_sed_cmds"; then
ac_sed_cmds=cat
fi
EOF
cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
*:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
# The file is in a subdirectory.
test ! -d "$ac_dir" && mkdir "$ac_dir"
ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
# A "../" for each directory in $ac_dir_suffix.
ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
else
ac_dir_suffix= ac_dots=
fi
case "$ac_given_srcdir" in
.) srcdir=.
if test -z "$ac_dots"; then top_srcdir=.
else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
/*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
*) # Relative path.
srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
top_srcdir="$ac_dots$ac_given_srcdir" ;;
esac
case "$ac_given_INSTALL" in
[/$]*) INSTALL="$ac_given_INSTALL" ;;
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
case "$ac_file" in
*Makefile*) ac_comsub="1i\\
# $configure_input" ;;
*) ac_comsub= ;;
esac
ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*
EOF
cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF
exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
jailer-0.4.orig/configure.in 0100644 0001750 0001750 00000000545 07351164506 014235 0 ustar jfs jfs dnl Process this file with autoconf to produce a configure script.
AC_INIT(jailer.pl)
AM_INIT_AUTOMAKE(jailer, "0.3")
dnl Checks for programs.
dnl Checks for libraries.
dnl Checks for header files.
dnl Checks for typedefs, structures, and compiler characteristics.
dnl Checks for library functions.
AC_OUTPUT(Makefile
config/Makefile
debian/Makefile)
jailer-0.4.orig/install-sh 0120777 0001750 0001750 00000000000 07651066317 021525 2/usr/share/automake/install-sh ustar jfs jfs jailer-0.4.orig/autogen.sh 0100755 0001750 0001750 00000000306 07271301332 013707 0 ustar jfs jfs #!/bin/sh
#
# $Id: autogen.sh,v 1.1 2001/04/24 13:42:50 marci Exp $
#
# Run this script to generate Makefile skeletons and configure
# scripts.
#
aclocal
autoheader
automake --add-missing
autoconf
jailer-0.4.orig/missing 0120777 0001750 0001750 00000000000 07651066317 020513 2/usr/share/automake/missing ustar jfs jfs jailer-0.4.orig/debian/ 0040755 0001750 0001750 00000000000 07651066332 013146 5 ustar jfs jfs jailer-0.4.orig/debian/CVS/ 0040755 0001750 0001750 00000000000 07403165322 013573 5 ustar jfs jfs jailer-0.4.orig/debian/CVS/Root 0100644 0001750 0001750 00000000046 07403163012 014430 0 ustar jfs jfs :pserver:scott@tudor.balabit:/var/cvs
jailer-0.4.orig/debian/CVS/Repository 0100644 0001750 0001750 00000000016 07403163012 015661 0 ustar jfs jfs jailer/debian
jailer-0.4.orig/debian/CVS/Entries 0100644 0001750 0001750 00000000625 07403165322 015127 0 ustar jfs jfs /Makefile.am/1.9/Sun Sep 16 18:10:29 2001//
/conffiles/1.1/Wed Jun 20 11:50:15 2001//
/control/1.3/Wed Jun 20 10:01:34 2001//
/copyright/1.1/Tue Apr 24 13:43:54 2001//
/dirs/1.1/Tue Apr 24 13:43:54 2001//
/docs/1.1/Tue Apr 24 13:43:54 2001//
/postrm/1.2/Fri Aug 10 13:57:18 2001//
/changelog/1.5/Tue Dec 4 15:05:50 2001//
/postinst/1.3/Tue Dec 4 15:18:37 2001//
/rules/1.11/Tue Dec 4 15:23:09 2001//
D
jailer-0.4.orig/debian/dirs 0100644 0001750 0001750 00000000011 07271301432 014006 0 ustar jfs jfs usr/sbin
jailer-0.4.orig/debian/docs 0100644 0001750 0001750 00000000052 07271301432 014002 0 ustar jfs jfs INSTALL
NEWS
README
jailer.conf
ChangeLog
jailer-0.4.orig/debian/control 0100644 0001750 0001750 00000000400 07314072176 014537 0 ustar jfs jfs Source: jailer
Section: admin
Priority: optional
Maintainer: Marton Illes
Standards-Version: 3.0.1
Package: jailer
Architecture: any
Depends: perl5, cpio, restrict
Description: jailer builds and maintains jail, eg chroot-ed enviroments
jailer-0.4.orig/debian/rules 0100755 0001750 0001750 00000003237 07403165135 014224 0 ustar jfs jfs #!/usr/bin/make -f
# Sample debian/rules that uses debhelper.
# GNU copyright 1997 to 1999 by Joey Hess.
# Uncomment this to turn on verbose mode.
#export DH_VERBOSE=1
# This is the debhelper compatability version to use.
export DH_COMPAT=1
build: build-stamp
build-stamp:
dh_testdir
./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info --sysconfdir=/etc
# Add here commands to compile the package.
#$(MAKE)
touch build-stamp
clean:
dh_testdir
dh_testroot
rm -f build-stamp
# Add here commands to clean up after the build process.
-$(MAKE) distclean
dh_clean
install: build
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs
# Add here commands to install the package into debian/tmp.
$(MAKE) install DESTDIR=`pwd`/debian/tmp
# create symlink to jailer.pl
ln -s `pwd`/debian/tmp/usr/sbin/jailer.pl `pwd`/debian/tmp/usr/sbin/jailer
# Build architecture-independent files here.
binary-indep: build install
# We have nothing to do by default.
# Build architecture-dependent files here.
binary-arch: build install
# dh_testversion
dh_testdir
dh_testroot
# dh_installdebconf
dh_installdocs
dh_installexamples
# dh_installmenu
# dh_installemacsen
# dh_installpam
dh_installinit -n --init-script=jail-bind
dh_installinit -n --init-script=jail-ntp
# dh_installcron
# dh_installmanpages
# dh_installinfo
dh_installchangelogs
dh_link
dh_strip
dh_compress
dh_fixperms
# You may want to make some executables suid here.
# dh_suidregister
# dh_makeshlibs
dh_installdeb
# dh_perl
dh_shlibdeps
dh_gencontrol
dh_md5sums
dh_builddeb
binary: binary-indep binary-arch
.PHONY: build clean binary-indep binary-arch binary install
jailer-0.4.orig/debian/conffiles 0100644 0001750 0001750 00000000021 07314106767 015032 0 ustar jfs jfs /etc/jailer.conf
jailer-0.4.orig/debian/changelog 0100644 0001750 0001750 00000001334 07403164260 015010 0 ustar jfs jfs jailer (0.4-1) unstable; urgency=low
* New update script (updatejail)
* Now you can call jailer.pl simply jailer
* Shiney new manpages
* Updated changelog
-- Peter Holtzl Tue, 4 Dec 2001 15:45:00 +0200
jailer (0.3) unstable; urgency=low
* New upstream release.
* Configuration updates
-- Marton Illes Fri, 10 Aug 2001 16:07:07 +0200
jailer (0.2) unstable; urgency=low
* New upstream release.
* Config files added.
-- Marton Illes Wed, 20 Jun 2001 14:36:12 +0200
jailer (0.1) unstable; urgency=low
* Initial Release.
-- Marton Illes Tue, 24 Apr 2001 15:33:29 +0200
Local variables:
mode: debian-changelog
End:
jailer-0.4.orig/debian/changelog.pre 0100644 0001750 0001750 00000000753 07403163144 015601 0 ustar jfs jfs jailer (0.3) unstable; urgency=low
* New upstream release.
* Configuration updates
-- Marton Illes Fri, 10 Aug 2001 16:07:07 +0200
jailer (0.2) unstable; urgency=low
* New upstream release.
* Config files added.
-- Marton Illes Wed, 20 Jun 2001 14:36:12 +0200
jailer (0.1) unstable; urgency=low
* Initial Release.
-- Marton Illes Tue, 24 Apr 2001 15:33:29 +0200
Local variables:
mode: debian-changelog
End:
jailer-0.4.orig/debian/postinst 0100644 0001750 0001750 00000002160 07403164515 014745 0 ustar jfs jfs #!/bin/sh
set -e
#DEBHELPER#
exit 0
echo "Jailer contains pre-defined jails for BIND and for NTP."
echo ""
echo -n "Add BIND jail?[Y/n] "
read yn
test -n "$yn" || yn="Y"
case "$yn" in
[Nn]*)
echo "BIND jail not configured automaticly!"
echo -n "Press [ENTER] "
read line
;;
*)
if ! $(dpkg-divert --list /etc/init.d/bind.jailer | grep -q "by jailer"); then
dpkg-divert --package jailer --add --rename \
--divert /etc/init.d/bind.jailer /etc/init.d/bind
fi
/usr/sbin/jailer.pl /etc/jailer.conf bind
update-rc.d jail-bind defaults >/dev/null
/etc/init.d/jail-bind start
;;
esac
echo ""
echo -n "Add BIND jail?[Y/n] "
read yn
test -n "$yn" || yn="Y"
case "$yn" in
[Nn]*)
echo "BIND jail not configured automaticly!"
echo -n "Press [ENTER] "
read line
;;
*)
if ! $(dpkg-divert --list /etc/init.d/ntp.jailer | grep -q "by jailer"); then
dpkg-divert --package jailer --add --rename \
--divert /etc/init.d/ntp.jailer /etc/init.d/ntp
fi
/usr/sbin/jailer.pl /etc/jailer.conf ntp
update-rc.d jail-ntp defaults >/dev/null
/etc/init.d/jail-ntp start
;;
esac
jailer-0.4.orig/debian/Makefile.am 0100644 0001750 0001750 00000000130 07351165425 015171 0 ustar jfs jfs EXTRA_DIST = Makefile.am changelog control copyright dirs docs rules conffiles postinst
jailer-0.4.orig/debian/Makefile.in 0100644 0001750 0001750 00000010552 07403163170 015204 0 ustar jfs jfs # Makefile.in generated automatically by automake 1.4 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
MAKEINFO = @MAKEINFO@
PACKAGE = @PACKAGE@
VERSION = @VERSION@
EXTRA_DIST = Makefile.am changelog control copyright dirs docs rules conffiles postinst
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_CLEAN_FILES =
DIST_COMMON = Makefile.am Makefile.in
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --gnu debian/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
cd $(top_builddir) \
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
tags: TAGS
TAGS:
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
subdir = debian
distdir: $(DISTFILES)
here=`cd $(top_builddir) && pwd`; \
top_distdir=`cd $(top_distdir) && pwd`; \
distdir=`cd $(distdir) && pwd`; \
cd $(top_srcdir) \
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu debian/Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
if test -d $$d/$$file; then \
cp -pr $$d/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
info-am:
info: info-am
dvi-am:
dvi: dvi-am
check-am: all-am
check: check-am
installcheck-am:
installcheck: installcheck-am
install-exec-am:
install-exec: install-exec-am
install-data-am:
install-data: install-data-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-am
uninstall-am:
uninstall: uninstall-am
all-am: Makefile
all-redirect: all-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs:
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
mostlyclean-am: mostlyclean-generic
mostlyclean: mostlyclean-am
clean-am: clean-generic mostlyclean-am
clean: clean-am
distclean-am: distclean-generic clean-am
distclean: distclean-am
maintainer-clean-am: maintainer-clean-generic distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-am
.PHONY: tags distdir info-am info dvi-am dvi check check-am \
installcheck-am installcheck install-exec-am install-exec \
install-data-am install-data install-am install uninstall-am uninstall \
all-redirect all-am all installdirs mostlyclean-generic \
distclean-generic clean-generic maintainer-clean-generic clean \
mostlyclean distclean maintainer-clean
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
jailer-0.4.orig/debian/postrm 0100644 0001750 0001750 00000000612 07334764076 014421 0 ustar jfs jfs #!/bin/sh
set -e
#DEBHELPER#
if $(dpkg-divert --list /etc/init.d/bind.jailer | grep -q "by jailer"); then
dpkg-divert --package jailer --remove --rename \
--divert /etc/init.d/bind.jailer /etc/init.d/bind
fi
if $(dpkg-divert --list /etc/init.d/ntp.jailer | grep -q "by jailer"); then
dpkg-divert --package jailer --remove --rename \
--divert /etc/init.d/ntp.jailer /etc/init.d/ntp
fi
jailer-0.4.orig/debian/copyright 0100644 0001750 0001750 00000000207 07271301432 015064 0 ustar jfs jfs This package was debianized by Marton Illes
Upstream Author(s): Marton Illes
Copyright:
GNU/GPL
jailer-0.4.orig/config/ 0040755 0001750 0001750 00000000000 07651066331 013170 5 ustar jfs jfs jailer-0.4.orig/config/CVS/ 0040755 0001750 0001750 00000000000 07403163012 013610 5 ustar jfs jfs jailer-0.4.orig/config/CVS/Root 0100644 0001750 0001750 00000000046 07403163012 014453 0 ustar jfs jfs :pserver:scott@tudor.balabit:/var/cvs
jailer-0.4.orig/config/CVS/Repository 0100644 0001750 0001750 00000000016 07403163012 015704 0 ustar jfs jfs jailer/config
jailer-0.4.orig/config/CVS/Entries 0100644 0001750 0001750 00000000132 07403163012 015135 0 ustar jfs jfs /Makefile.am/1.4/Tue Dec 4 14:56:39 2001//
/jailer.conf/1.7/Fri Oct 19 14:15:16 2001//
D
jailer-0.4.orig/config/Makefile.am 0100644 0001750 0001750 00000000066 07403162047 015217 0 ustar jfs jfs EXTRA_DIST = jailer.conf
sysconf_DATA = jailer.conf
jailer-0.4.orig/config/Makefile.in 0100644 0001750 0001750 00000012140 07403163170 015222 0 ustar jfs jfs # Makefile.in generated automatically by automake 1.4 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
MAKEINFO = @MAKEINFO@
PACKAGE = @PACKAGE@
VERSION = @VERSION@
EXTRA_DIST = jailer.conf
sysconf_DATA = jailer.conf
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_CLEAN_FILES =
DATA = $(sysconf_DATA)
DIST_COMMON = Makefile.am Makefile.in
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --gnu config/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
cd $(top_builddir) \
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
install-sysconfDATA: $(sysconf_DATA)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(sysconfdir)
@list='$(sysconf_DATA)'; for p in $$list; do \
if test -f $(srcdir)/$$p; then \
echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(sysconfdir)/$$p"; \
$(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(sysconfdir)/$$p; \
else if test -f $$p; then \
echo " $(INSTALL_DATA) $$p $(DESTDIR)$(sysconfdir)/$$p"; \
$(INSTALL_DATA) $$p $(DESTDIR)$(sysconfdir)/$$p; \
fi; fi; \
done
uninstall-sysconfDATA:
@$(NORMAL_UNINSTALL)
list='$(sysconf_DATA)'; for p in $$list; do \
rm -f $(DESTDIR)$(sysconfdir)/$$p; \
done
tags: TAGS
TAGS:
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
subdir = config
distdir: $(DISTFILES)
here=`cd $(top_builddir) && pwd`; \
top_distdir=`cd $(top_distdir) && pwd`; \
distdir=`cd $(distdir) && pwd`; \
cd $(top_srcdir) \
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu config/Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
if test -d $$d/$$file; then \
cp -pr $$d/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
info-am:
info: info-am
dvi-am:
dvi: dvi-am
check-am: all-am
check: check-am
installcheck-am:
installcheck: installcheck-am
install-exec-am: install-sysconfDATA
install-exec: install-exec-am
install-data-am:
install-data: install-data-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-am
uninstall-am: uninstall-sysconfDATA
uninstall: uninstall-am
all-am: Makefile $(DATA)
all-redirect: all-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs:
$(mkinstalldirs) $(DESTDIR)$(sysconfdir)
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
mostlyclean-am: mostlyclean-generic
mostlyclean: mostlyclean-am
clean-am: clean-generic mostlyclean-am
clean: clean-am
distclean-am: distclean-generic clean-am
distclean: distclean-am
maintainer-clean-am: maintainer-clean-generic distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-am
.PHONY: uninstall-sysconfDATA install-sysconfDATA tags distdir info-am \
info dvi-am dvi check check-am installcheck-am installcheck \
install-exec-am install-exec install-data-am install-data install-am \
install uninstall-am uninstall all-redirect all-am all installdirs \
mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
jailer-0.4.orig/config/jailer.conf 0100644 0001750 0001750 00000000221 07364032564 015277 0 ustar jfs jfs
Junk: /usr/doc/* /usr/man/* /usr/share/man/* /usr/share/doc/* /etc/init.d/* /usr/share/zoneinfo/* /sbin/ldconfig.new /etc/*
jailer-0.4.orig/mkinstalldirs 0120777 0001750 0001750 00000000000 07651066317 023131 2/usr/share/automake/mkinstalldirs ustar jfs jfs jailer-0.4.orig/Makefile.am 0100644 0001750 0001750 00000000155 07403164654 013757 0 ustar jfs jfs SUBDIRS = . debian config doc
EXTRA_DIST = jailer.conf jailer.pl TODO
sbin_SCRIPTS = jailer.pl updatejail
jailer-0.4.orig/Makefile.in 0100644 0001750 0001750 00000025252 07403165161 013767 0 ustar jfs jfs # Makefile.in generated automatically by automake 1.4 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
MAKEINFO = @MAKEINFO@
PACKAGE = @PACKAGE@
VERSION = @VERSION@
SUBDIRS = . debian config doc
EXTRA_DIST = jailer.conf jailer.pl TODO
sbin_SCRIPTS = jailer.pl updatejail
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_CLEAN_FILES =
SCRIPTS = $(sbin_SCRIPTS)
DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \
Makefile.in NEWS TODO aclocal.m4 configure configure.in install-sh \
missing mkinstalldirs
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
cd $(top_builddir) \
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
$(ACLOCAL_M4): configure.in
cd $(srcdir) && $(ACLOCAL)
config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
cd $(srcdir) && $(AUTOCONF)
install-sbinSCRIPTS: $(sbin_SCRIPTS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(sbindir)
@list='$(sbin_SCRIPTS)'; for p in $$list; do \
if test -f $$p; then \
echo " $(INSTALL_SCRIPT) $$p $(DESTDIR)$(sbindir)/`echo $$p|sed '$(transform)'`"; \
$(INSTALL_SCRIPT) $$p $(DESTDIR)$(sbindir)/`echo $$p|sed '$(transform)'`; \
else if test -f $(srcdir)/$$p; then \
echo " $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(sbindir)/`echo $$p|sed '$(transform)'`"; \
$(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(sbindir)/`echo $$p|sed '$(transform)'`; \
else :; fi; fi; \
done
uninstall-sbinSCRIPTS:
@$(NORMAL_UNINSTALL)
list='$(sbin_SCRIPTS)'; for p in $$list; do \
rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed '$(transform)'`; \
done
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
@SET_MAKE@
all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
rev="$$subdir $$rev"; \
test "$$subdir" = "." && dot_seen=yes; \
done; \
test "$$dot_seen" = "no" && rev=". $$rev"; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
here=`pwd` && cd $(srcdir) \
&& mkid -f$$here/ID $$unique $(LISP)
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
mostlyclean-tags:
clean-tags:
distclean-tags:
-rm -f TAGS ID
maintainer-clean-tags:
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
-rm -rf $(distdir)
GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
mkdir $(distdir)/=build
mkdir $(distdir)/=inst
dc_install_base=`cd $(distdir)/=inst && pwd`; \
cd $(distdir)/=build \
&& ../configure --srcdir=.. --prefix=$$dc_install_base \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) dist
-rm -rf $(distdir)
@banner="$(distdir).tar.gz is ready for distribution"; \
dashes=`echo "$$banner" | sed s/./=/g`; \
echo "$$dashes"; \
echo "$$banner"; \
echo "$$dashes"
dist: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
dist-all: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
distdir: $(DISTFILES)
-rm -rf $(distdir)
mkdir $(distdir)
-chmod 777 $(distdir)
here=`cd $(top_builddir) && pwd`; \
top_distdir=`cd $(distdir) && pwd`; \
distdir=`cd $(distdir) && pwd`; \
cd $(top_srcdir) \
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
if test -d $$d/$$file; then \
cp -pr $$d/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
for subdir in $(SUBDIRS); do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
chmod 777 $(distdir)/$$subdir; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
|| exit 1; \
fi; \
done
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-exec-am: install-sbinSCRIPTS
install-exec: install-exec-recursive
install-data-am:
install-data: install-data-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-sbinSCRIPTS
uninstall: uninstall-recursive
all-am: Makefile $(SCRIPTS)
all-redirect: all-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
$(mkinstalldirs) $(DESTDIR)$(sbindir)
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
mostlyclean-am: mostlyclean-tags mostlyclean-generic
mostlyclean: mostlyclean-recursive
clean-am: clean-tags clean-generic mostlyclean-am
clean: clean-recursive
distclean-am: distclean-tags distclean-generic clean-am
distclean: distclean-recursive
-rm -f config.status
maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-recursive
-rm -f config.status
.PHONY: uninstall-sbinSCRIPTS install-sbinSCRIPTS install-data-recursive \
uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-am install-data install-am install \
uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
jailer-0.4.orig/jailer.conf 0100644 0001750 0001750 00000000222 07351164506 014031 0 ustar jfs jfs
Junk: /usr/doc/* /usr/man/* /usr/share/man/* /usr/share/doc/* /etc/init.d/* /usr/share/zoneinfo/* /sbin/ldconfig.new /etc/*
jailer-0.4.orig/config.h.in 0100644 0001750 0001750 00000000245 07403163167 013744 0 ustar jfs jfs /* config.h.in. Generated automatically from configure.in by autoheader. */
/* Name of package */
#undef PACKAGE
/* Version number of package */
#undef VERSION
jailer-0.4.orig/AUTHORS 0100644 0001750 0001750 00000000130 07313730555 012763 0 ustar jfs jfs
Initial revision by: Marton Illes
Additional help: The Balabit Crew
jailer-0.4.orig/INSTALL 0120777 0001750 0001750 00000000000 07651066317 017605 2/usr/share/automake/INSTALL ustar jfs jfs jailer-0.4.orig/ChangeLog 0100644 0001750 0001750 00000001152 07351164506 013471 0 ustar jfs jfs 2001-09-16 Balazs Scheidler
* removed automatic jailing, it's done in zorp-harden instead,
default config contains only junks
2001-04-24 Marton Illes
* Added debian control files.
* Initial version released.
2001-05-28 Balazs Scheidler
* jailer.pl: fixed a bug in the config file parser
2001-06-19 Marton Illes
* Minor clean-ups.
* Debian control updates.
2001-08-10 Marton Illes
* fixes in config file praser
* globbing fixes
* pre-defined config fixes
* debian control - postinst fixes
jailer-0.4.orig/COPYING 0120777 0001750 0001750 00000000000 07651066317 017611 2/usr/share/automake/COPYING ustar jfs jfs