juke-0.7.orig/0000755000000000000000000000000010101601072013177 5ustar rootroot00000000000000juke-0.7.orig/Makefile.in0000644000000000000000000002507510101601072015255 0ustar rootroot00000000000000# Makefile.in generated automatically by automake 1.4 from Makefile.am # Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include DESTDIR = pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ CC = @CC@ MAKEINFO = @MAKEINFO@ PACKAGE = @PACKAGE@ VERSION = @VERSION@ SUBDIRS = src doc EXTRA_DIST = BUGS LIMITATIONS MANUAL juke.conf ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = DIST_COMMON = README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \ Makefile.am Makefile.in TODO acconfig.h acinclude.m4 aclocal.m4 \ config.guess config.h.in config.sub configure configure.in install-sh \ missing mkinstalldirs DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) TAR = tar GZIP_ENV = --best all: all-redirect .SUFFIXES: $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && $(AUTOMAKE) --foreign --include-deps Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status $(ACLOCAL_M4): configure.in acinclude.m4 cd $(srcdir) && $(ACLOCAL) config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) config.h: stamp-h @if test ! -f $@; then \ rm -f stamp-h; \ $(MAKE) stamp-h; \ else :; fi stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES= CONFIG_HEADERS=config.h \ $(SHELL) ./config.status @echo timestamp > stamp-h 2> /dev/null $(srcdir)/config.h.in: $(srcdir)/stamp-h.in @if test ! -f $@; then \ rm -f $(srcdir)/stamp-h.in; \ $(MAKE) $(srcdir)/stamp-h.in; \ else :; fi $(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h cd $(top_srcdir) && $(AUTOHEADER) @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null mostlyclean-hdr: clean-hdr: distclean-hdr: -rm -f config.h maintainer-clean-hdr: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. @SET_MAKE@ all-recursive install-data-recursive install-exec-recursive \ installdirs-recursive install-recursive uninstall-recursive \ check-recursive installcheck-recursive info-recursive dvi-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ rev="$$subdir $$rev"; \ test "$$subdir" = "." && dot_seen=yes; \ done; \ test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ here=`pwd` && cd $(srcdir) \ && mkid -f$$here/ID $$unique $(LISP) TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS) mostlyclean-tags: clean-tags: distclean-tags: -rm -f TAGS ID maintainer-clean-tags: distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist -rm -rf $(distdir) GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz mkdir $(distdir)/=build mkdir $(distdir)/=inst dc_install_base=`cd $(distdir)/=inst && pwd`; \ cd $(distdir)/=build \ && ../configure --srcdir=.. --prefix=$$dc_install_base \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) dist -rm -rf $(distdir) @banner="$(distdir).tar.gz is ready for distribution"; \ dashes=`echo "$$banner" | sed s/./=/g`; \ echo "$$dashes"; \ echo "$$banner"; \ echo "$$dashes" dist: distdir -chmod -R a+r $(distdir) GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) -rm -rf $(distdir) dist-all: distdir -chmod -R a+r $(distdir) GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) -rm -rf $(distdir) distdir: $(DISTFILES) -rm -rf $(distdir) mkdir $(distdir) -chmod 777 $(distdir) @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done for subdir in $(SUBDIRS); do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ chmod 777 $(distdir)/$$subdir; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ || exit 1; \ fi; \ done info-am: info: info-recursive dvi-am: dvi: dvi-recursive check-am: all-am check: check-recursive installcheck-am: installcheck: installcheck-recursive all-recursive-am: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive install-exec-am: install-exec: install-exec-recursive install-data-am: install-data: install-data-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-recursive uninstall-am: uninstall: uninstall-recursive all-am: Makefile config.h all-redirect: all-recursive-am install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: installdirs-recursive installdirs-am: mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic mostlyclean: mostlyclean-recursive clean-am: clean-hdr clean-tags clean-generic mostlyclean-am clean: clean-recursive distclean-am: distclean-hdr distclean-tags distclean-generic clean-am distclean: distclean-recursive -rm -f config.status maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \ maintainer-clean-generic distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-recursive -rm -f config.status .PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \ install-data-recursive uninstall-data-recursive install-exec-recursive \ uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ all-recursive check-recursive installcheck-recursive info-recursive \ dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \ install-exec-am install-exec install-data-am install-data install-am \ install uninstall-am uninstall all-redirect all-am all installdirs-am \ installdirs mostlyclean-generic distclean-generic clean-generic \ maintainer-clean-generic clean mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: juke-0.7.orig/README0000644000000000000000000000176110101601072014064 0ustar rootroot00000000000000 name: juke Copyright (C) 1999 Johan Bolmsjo This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. contact: johan@nocrew.org, http://www.nocrew.org/software/juke Juke is a curses based juke box program. Read the MANUAL for information on how to use the program. If you've found a bug that you want fixed you can mail me and I'll see what I can do. juke-0.7.orig/stamp-h.in0000644000000000000000000000001210101601072015071 0ustar rootroot00000000000000timestamp juke-0.7.orig/AUTHORS0000644000000000000000000000024210101601072014245 0ustar rootroot00000000000000Programming: Johan Bolmsjo Man page: Eric Leblanc Thanks to ========= Oyvind Moll For pointing out FreeBSD differences. juke-0.7.orig/COPYING0000644000000000000000000004306310101601072014240 0ustar rootroot00000000000000 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 675 Mass Ave, Cambridge, MA 02139, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) 19yy This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) 19yy name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. , 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License. juke-0.7.orig/ChangeLog0000644000000000000000000000314710101601072014756 0ustar rootroot00000000000000juke-0.7 -------- 2001.2.11: - Support for NetBSD - Added autogen.sh script. - Requires ncurses now, didn't work with curses anyway. - Changed ChangeLog format juke-0.6 -------- 2000.3.6: - Could not quit when player was paused. This has been fixed. - Changed player_status function to return 1 if a player exits for example with a signal. So now "amp" can be used with juke. - Error message fix in conf.c - Man page added. juke-0.5 -------- 1999.4.15: - Changed player_kill and player_status. See LIMITATIONS. Sends SIGTERM instead of SIGKILL when killing players. juke-0.4 -------- 1999.4.15: - Changed shuffle routine. Better? - When adding items recursively they where not sorted. Sorting is now done when scaning the directories. juke-0.3 -------- 1999.4.7: - autoconf, automake - Compiles under FreeBSD without any modifications now ??? - User doc in LyX (see doc/ directory) (LyX is good, death to bill:)). - Changed behavior of the m key to not delete the playing tune. - Better shuffle routine. - Added recursive deletion of items from queue. - Reverted to old version of player_kill(). Still not perfect, see LIMITATIONS. - Fixed memory leek in queue_add_dir(). - Sometimes the queue didn't get redrawn, fixed. - Now replaces non ascii characters in file names with a '?'. Some terminal emulators had problems with this. juke-0.2 -------- 1999.3.23: - Added recursive addition of items to queue. - 'm' key now works in _item_ display mode. - Fixed pause bug. Juke should work well with players with multipple processes as well now. juke-0.1 -------- 1999.3.20: - First release juke-0.7.orig/INSTALL0000644000000000000000000000033110101601072014225 0ustar rootroot00000000000000Do the following to build and install juke. $ ./configure $ make # make install-strip juke will be installed in /usr/local/bin by default. If you have a CVS checkout run the autogen.sh script instead of configure. juke-0.7.orig/Makefile.am0000644000000000000000000000010110101601072015223 0ustar rootroot00000000000000SUBDIRS = src doc EXTRA_DIST = BUGS LIMITATIONS MANUAL juke.conf juke-0.7.orig/TODO0000644000000000000000000000013310101601072013664 0ustar rootroot00000000000000TODO LIST ========= - Read mp3 id3 tags - Make tui_redraw_list() only redraw changed lines juke-0.7.orig/acconfig.h0000644000000000000000000000027410101601072015124 0ustar rootroot00000000000000/* Define if integer math is considerably faster than */ /* floating-point math. */ #undef FIXED_MATH /* Name of package */ #undef PACKAGE /* Version number of package */ #undef VERSION juke-0.7.orig/acinclude.m40000644000000000000000000000000010101601072015356 0ustar rootroot00000000000000juke-0.7.orig/aclocal.m40000644000000000000000000001045510101601072015044 0ustar rootroot00000000000000dnl aclocal.m4 generated automatically by aclocal 1.4 dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl This program is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A dnl PARTICULAR PURPOSE. # Do all the work for Automake. This macro actually does too much -- # some checks are only needed if your package does certain things. # But this isn't really a big deal. # serial 1 dnl Usage: dnl AM_INIT_AUTOMAKE(package,version, [no-define]) AC_DEFUN(AM_INIT_AUTOMAKE, [AC_REQUIRE([AC_PROG_INSTALL]) PACKAGE=[$1] AC_SUBST(PACKAGE) VERSION=[$2] AC_SUBST(VERSION) dnl test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi ifelse([$3],, AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) AC_REQUIRE([AM_SANITY_CHECK]) AC_REQUIRE([AC_ARG_PROGRAM]) dnl FIXME This is truly gross. missing_dir=`cd $ac_aux_dir && pwd` AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) AC_REQUIRE([AC_PROG_MAKE_SET])]) # # Check to make sure that the build environment is sane. # AC_DEFUN(AM_SANITY_CHECK, [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftestfile # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` if test "[$]*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftestfile` fi if test "[$]*" != "X $srcdir/configure conftestfile" \ && test "[$]*" != "X conftestfile $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "[$]2" = conftestfile ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi rm -f conftest* AC_MSG_RESULT(yes)]) dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) dnl The program must properly implement --version. AC_DEFUN(AM_MISSING_PROG, [AC_MSG_CHECKING(for working $2) # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if ($2 --version) < /dev/null > /dev/null 2>&1; then $1=$2 AC_MSG_RESULT(found) else $1="$3/missing $2" AC_MSG_RESULT(missing) fi AC_SUBST($1)]) # Like AC_CONFIG_HEADER, but automatically create stamp file. AC_DEFUN(AM_CONFIG_HEADER, [AC_PREREQ([2.12]) AC_CONFIG_HEADER([$1]) dnl When config.status generates a header, we must update the stamp-h file. dnl This file resides in the same directory as the config header dnl that is generated. We must strip everything past the first ":", dnl and everything past the last "/". AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>, <>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>, <>; do case " <<$>>CONFIG_HEADERS " in *" <<$>>am_file "*<<)>> echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx ;; esac am_indx=`expr "<<$>>am_indx" + 1` done<<>>dnl>>) changequote([,]))]) juke-0.7.orig/config.guess0000755000000000000000000006532010101601072015525 0ustar rootroot00000000000000#! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 93, 94, 95, 96, 97, 1998 Free Software Foundation, Inc. # # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Written by Per Bothner . # The master version of this file is at the FSF in /home/gd/gnu/lib. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # # The plan is that this can be called by configure scripts if you # don't specify an explicit system type (host/target name). # # Only a few systems have been added to this list; please add others # (but try to keep the structure clean). # # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 8/24/94.) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown dummy=dummy-$$ trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15 # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in alpha:OSF1:*:*) if test $UNAME_RELEASE = "V4.0"; then UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` fi # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. cat <$dummy.s .globl main .ent main main: .frame \$30,0,\$26,0 .prologue 0 .long 0x47e03d80 # implver $0 lda \$2,259 .long 0x47e20c21 # amask $2,$1 srl \$1,8,\$2 sll \$2,2,\$2 sll \$0,3,\$0 addl \$1,\$0,\$0 addl \$2,\$0,\$0 ret \$31,(\$26),1 .end main EOF ${CC-cc} $dummy.s -o $dummy 2>/dev/null if test "$?" = 0 ; then ./$dummy case "$?" in 7) UNAME_MACHINE="alpha" ;; 15) UNAME_MACHINE="alphaev5" ;; 14) UNAME_MACHINE="alphaev56" ;; 10) UNAME_MACHINE="alphapca56" ;; 16) UNAME_MACHINE="alphaev6" ;; esac fi rm -f $dummy.s $dummy echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr [[A-Z]] [[a-z]]` exit 0 ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit 0 ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-cbm-sysv4 exit 0;; amiga:NetBSD:*:*) echo m68k-cbm-netbsd${UNAME_RELEASE} exit 0 ;; amiga:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit 0 ;; arc64:OpenBSD:*:*) echo mips64el-unknown-openbsd${UNAME_RELEASE} exit 0 ;; arc:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; hkmips:OpenBSD:*:*) echo mips-unknown-openbsd${UNAME_RELEASE} exit 0 ;; pmax:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; sgi:OpenBSD:*:*) echo mips-unknown-openbsd${UNAME_RELEASE} exit 0 ;; wgrisc:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit 0;; arm32:NetBSD:*:*) echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` exit 0 ;; SR2?01:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit 0;; Pyramid*:OSx*:*:*|MIS*:OSx*:*:*|MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit 0 ;; NILE:*:*:dcosx) echo pyramid-pyramid-svr4 exit 0 ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; i86pc:SunOS:5.*:*) echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit 0 ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit 0 ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} ;; sun4) echo sparc-sun-sunos${UNAME_RELEASE} ;; esac exit 0 ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit 0 ;; atari*:NetBSD:*:*) echo m68k-atari-netbsd${UNAME_RELEASE} exit 0 ;; atari*:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; sun3*:NetBSD:*:*) echo m68k-sun-netbsd${UNAME_RELEASE} exit 0 ;; sun3*:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mac68k:NetBSD:*:*) echo m68k-apple-netbsd${UNAME_RELEASE} exit 0 ;; mac68k:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mvme68k:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mvme88k:OpenBSD:*:*) echo m88k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit 0 ;; macppc:NetBSD:*:*) echo powerpc-apple-netbsd${UNAME_RELEASE} exit 0 ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit 0 ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit 0 ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit 0 ;; 2020:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit 0 ;; mips:*:*:UMIPS | mips:*:*:RISCos) sed 's/^ //' << EOF >$dummy.c int main (argc, argv) int argc; char **argv; { #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF ${CC-cc} $dummy.c -o $dummy \ && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ && rm $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy echo mips-mips-riscos${UNAME_RELEASE} exit 0 ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit 0 ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit 0 ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit 0 ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit 0 ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \ -o ${TARGET_BINARY_INTERFACE}x = x ] ; then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi else echo i586-dg-dgux${UNAME_RELEASE} fi exit 0 ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit 0 ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit 0 ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit 0 ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit 0 ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit 0 ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i?86:AIX:*:*) echo i386-ibm-aix exit 0 ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then sed 's/^ //' << EOF >$dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF ${CC-cc} $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy echo rs6000-ibm-aix3.2.5 elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit 0 ;; *:AIX:*:4) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'` if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=4.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit 0 ;; *:AIX:*:*) echo rs6000-ibm-aix exit 0 ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit 0 ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit 0 ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit 0 ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit 0 ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit 0 ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit 0 ;; 9000/[34678]??:HP-UX:*:*) case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/6?? | 9000/7?? | 9000/80[24] | 9000/8?[13679] | 9000/892 ) sed 's/^ //' << EOF >$dummy.c #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (${CC-cc} $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy` rm -f $dummy.c $dummy esac HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit 0 ;; 3050*:HI-UX:*:*) sed 's/^ //' << EOF >$dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF ${CC-cc} $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy echo unknown-hitachi-hiuxwe2 exit 0 ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit 0 ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit 0 ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit 0 ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit 0 ;; i?86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi exit 0 ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit 0 ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit 0 ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit 0 ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit 0 ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit 0 ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit 0 ;; CRAY*X-MP:*:*:*) echo xmp-cray-unicos exit 0 ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} exit 0 ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ exit 0 ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} exit 0 ;; CRAY*T3E:*:*:*) echo t3e-cray-unicosmk${UNAME_RELEASE} exit 0 ;; CRAY-2:*:*:*) echo cray2-cray-unicos exit 0 ;; F300:UNIX_System_V:*:*) FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit 0 ;; F301:UNIX_System_V:*:*) echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'` exit 0 ;; hp3[0-9][05]:NetBSD:*:*) echo m68k-hp-netbsd${UNAME_RELEASE} exit 0 ;; hp300:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit 0 ;; i?86:BSD/386:*:* | i?86:BSD/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit 0 ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit 0 ;; *:FreeBSD:*:*) echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit 0 ;; *:NetBSD:*:*) echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` exit 0 ;; *:OpenBSD:*:*) echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` exit 0 ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit 0 ;; i*:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit 0 ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin exit 0 ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; *:GNU:*:*) echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit 0 ;; *:Linux:*:*) # uname on the ARM produces all sorts of strangeness, and we need to # filter it out. case "$UNAME_MACHINE" in arm* | sa110*) UNAME_MACHINE="arm" ;; esac # The BFD linker knows what the default object file format is, so # first see if it will tell us. ld_help_string=`ld --help 2>&1` ld_supported_emulations=`echo $ld_help_string \ | sed -ne '/supported emulations:/!d s/[ ][ ]*/ /g s/.*supported emulations: *// s/ .*// p'` case "$ld_supported_emulations" in i?86linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" ; exit 0 ;; i?86coff) echo "${UNAME_MACHINE}-pc-linux-gnucoff" ; exit 0 ;; sparclinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;; armlinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;; m68klinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;; elf32ppc) echo "powerpc-unknown-linux-gnu" ; exit 0 ;; esac if test "${UNAME_MACHINE}" = "alpha" ; then sed 's/^ //' <$dummy.s .globl main .ent main main: .frame \$30,0,\$26,0 .prologue 0 .long 0x47e03d80 # implver $0 lda \$2,259 .long 0x47e20c21 # amask $2,$1 srl \$1,8,\$2 sll \$2,2,\$2 sll \$0,3,\$0 addl \$1,\$0,\$0 addl \$2,\$0,\$0 ret \$31,(\$26),1 .end main EOF LIBC="" ${CC-cc} $dummy.s -o $dummy 2>/dev/null if test "$?" = 0 ; then ./$dummy case "$?" in 7) UNAME_MACHINE="alpha" ;; 15) UNAME_MACHINE="alphaev5" ;; 14) UNAME_MACHINE="alphaev56" ;; 10) UNAME_MACHINE="alphapca56" ;; 16) UNAME_MACHINE="alphaev6" ;; esac objdump --private-headers $dummy | \ grep ld.so.1 > /dev/null if test "$?" = 0 ; then LIBC="libc1" fi fi rm -f $dummy.s $dummy echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0 elif test "${UNAME_MACHINE}" = "mips" ; then cat >$dummy.c </dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy else # Either a pre-BFD a.out linker (linux-gnuoldld) # or one that does not give us useful --help. # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout. # If ld does not provide *any* "supported emulations:" # that means it is gnuoldld. echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:" test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0 case "${UNAME_MACHINE}" in i?86) VENDOR=pc; ;; *) VENDOR=unknown; ;; esac # Determine whether the default compiler is a.out or elf cat >$dummy.c < main(argc, argv) int argc; char *argv[]; { #ifdef __ELF__ # ifdef __GLIBC__ # if __GLIBC__ >= 2 printf ("%s-${VENDOR}-linux-gnu\n", argv[1]); # else printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]); # endif # else printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]); # endif #else printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]); #endif return 0; } EOF ${CC-cc} $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy fi ;; # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions # are messed up and put the nodename in both sysname and nodename. i?86:DYNIX/ptx:4*:*) echo i386-sequent-sysv4 exit 0 ;; i?86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit 0 ;; i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*) if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE} else echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE} fi exit 0 ;; i?86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit 0 ;; i?86:UnixWare:*:*) if /bin/uname -X 2>/dev/null >/dev/null ; then (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 fi echo ${UNAME_MACHINE}-unixware-${UNAME_RELEASE}-${UNAME_VERSION} exit 0 ;; pc:*:*:*) # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i386. echo i386-pc-msdosdjgpp exit 0 ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit 0 ;; paragon:*:*:*) echo i860-intel-osf1 exit 0 ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit 0 ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit 0 ;; M68*:*:R3V[567]*:*) test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && echo i486-ncr-sysv4.3${OS_REL} && exit 0 /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && echo i486-ncr-sysv4 && exit 0 ;; m68*:LynxOS:2.*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit 0 ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit 0 ;; i?86:LynxOS:2.*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit 0 ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit 0 ;; rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit 0 ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit 0 ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit 0 ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit 0 ;; PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit 0 ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit 0 ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit 0 ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit 0 ;; news*:NEWS-OS:*:6*) echo mips-sony-newsos6 exit 0 ;; R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R4000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit 0 ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit 0 ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit 0 ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit 0 ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit 0 ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit 0 ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit 0 ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit 0 ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 cat >$dummy.c < # include #endif main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (__arm) && defined (__acorn) && defined (__unix) printf ("arm-acorn-riscix"); exit (0); #endif #if defined (hp300) && !defined (hpux) printf ("m68k-hp-bsd\n"); exit (0); #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; if (version < 4) printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); else printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-pc-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) #if !defined (ultrix) printf ("vax-dec-bsd\n"); exit (0); #else printf ("vax-dec-ultrix\n"); exit (0); #endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF ${CC-cc} $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy # Apollos put the system type in the environment. test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } # Convex versions that predate uname can use getsysinfo(1) if [ -x /usr/convex/getsysinfo ] then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd exit 0 ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit 0 ;; c34*) echo c34-convex-bsd exit 0 ;; c38*) echo c38-convex-bsd exit 0 ;; c4*) echo c4-convex-bsd exit 0 ;; esac fi #echo '(Unable to guess system type)' 1>&2 exit 1 juke-0.7.orig/config.h.in0000644000000000000000000000207410101601072015225 0ustar rootroot00000000000000/* config.h.in. Generated automatically from configure.in by autoheader. */ /* Define if you have that is POSIX.1 compatible. */ #undef HAVE_SYS_WAIT_H /* Define to `int' if doesn't define. */ #undef pid_t /* Define if the `setpgrp' function takes no argument. */ #undef SETPGRP_VOID /* Define if you have the ANSI C header files. */ #undef STDC_HEADERS /* Define if you have the getcwd function. */ #undef HAVE_GETCWD /* Define if you have the header file. */ #undef HAVE_DIRENT_H /* Define if you have the header file. */ #undef HAVE_FCNTL_H /* Define if you have the header file. */ #undef HAVE_NDIR_H /* Define if you have the header file. */ #undef HAVE_SYS_DIR_H /* Define if you have the header file. */ #undef HAVE_SYS_NDIR_H /* Define if you have the header file. */ #undef HAVE_UNISTD_H /* Define if you have the ncurses library (-lncurses). */ #undef HAVE_LIBNCURSES /* Name of package */ #undef PACKAGE /* Version number of package */ #undef VERSION juke-0.7.orig/config.sub0000755000000000000000000004661110101601072015172 0ustar rootroot00000000000000#! /bin/sh # Configuration validation subroutine script, version 1.1. # Copyright (C) 1991, 92-97, 1998 Free Software Foundation, Inc. # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software # can handle that machine. It does not imply ALL GNU software can. # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, # Boston, MA 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. if [ x$1 = x ] then echo Configuration name missing. 1>&2 echo "Usage: $0 CPU-MFR-OPSYS" 1>&2 echo "or $0 ALIAS" 1>&2 echo where ALIAS is a recognized configuration type. 1>&2 exit 1 fi # First pass through any local machine types. case $1 in *local*) echo $1 exit 0 ;; *) ;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in linux-gnu*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple) os= basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco5) os=sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; -psos*) os=-psos ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \ | arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \ | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 | hppa2.0 \ | alpha | alphaev5 | alphaev56 | we32k | ns16k | clipper \ | i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \ | mips64 | mipsel | mips64el | mips64orion | mips64orionel \ | mipstx39 | mipstx39el \ | sparc | sparclet | sparclite | sparc64 | v850) basic_machine=$basic_machine-unknown ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i[34567]86) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. vax-* | tahoe-* | i[34567]86-* | i860-* | m32r-* | m68k-* | m68000-* \ | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \ | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \ | power-* | none-* | 580-* | cray2-* | h8300-* | i960-* \ | xmp-* | ymp-* | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* \ | alpha-* | alphaev5-* | alphaev56-* | we32k-* | cydra-* \ | ns16k-* | pn-* | np1-* | xps100-* | clipper-* | orion-* \ | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \ | sparc64-* | mips64-* | mipsel-* \ | mips64el-* | mips64orion-* | mips64orionel-* \ | mipstx39-* | mipstx39el-* \ | f301-*) ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-cbm ;; amigaos | amigados) basic_machine=m68k-cbm os=-amigaos ;; amigaunix | amix) basic_machine=m68k-cbm os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | ymp) basic_machine=ymp-cray os=-unicos ;; cray2) basic_machine=cray2-cray os=-unicos ;; [ctj]90-cray) basic_machine=c90-cray os=-unicos ;; crds | unos) basic_machine=m68k-crds ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppa-next) os=-nextstep3 ;; i370-ibm* | ibm*) basic_machine=i370-ibm os=-mvs ;; # I'm not sure what "Sysv32" means. Should this be sysv3.2? i[34567]86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i[34567]86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i[34567]86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; i[34567]86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m88k-omron*) basic_machine=m88k-omron ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; miniframe) basic_machine=m68000-convergent ;; mipsel*-linux*) basic_machine=mipsel-unknown os=-linux-gnu ;; mips*-linux*) basic_machine=mips-unknown os=-linux-gnu ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; np1) basic_machine=np1-gould ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pentium | p5 | k5 | nexen) basic_machine=i586-pc ;; pentiumpro | p6 | k6 | 6x86) basic_machine=i686-pc ;; pentiumii | pentium2) basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | nexen-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | k6-* | 6x86-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-*) basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=rs6000-ibm ;; ppc) basic_machine=powerpc-unknown ;; ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; symmetry) basic_machine=i386-sequent os=-dynix ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; tower | tower-32) basic_machine=m68k-ncr ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; xmp) basic_machine=xmp-cray os=-unicos ;; xps | xps100) basic_machine=xps100-honeywell ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. mips) if [ x$os = x-linux-gnu ]; then basic_machine=mips-unknown else basic_machine=mips-mips fi ;; romp) basic_machine=romp-ibm ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sparc) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -svr4*) os=-sysv4 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -rhapsody* \ | -openstep*) # Remember, each alternative MUST END IN *, to match a version number. ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -ctix* | -uts*) os=-sysv ;; -ns2 ) os=-nextstep2 ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -xenix) os=-xenix ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in *-acorn) os=-riscix1.2 ;; arm*-semi) os=-aout ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 # This also exists in the configure program, but was not the # default. # os=-sunos4 ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-be) os=-beos ;; *-ibm) os=-aix ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next ) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f301-fujitsu) os=-uxpv ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -aix*) vendor=ibm ;; -hpux*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs*) vendor=ibm ;; -ptx*) vendor=sequent ;; -vxsim* | -vxworks*) vendor=wrs ;; -aux*) vendor=apple ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os juke-0.7.orig/configure0000755000000000000000000020046110101601072015111 0ustar rootroot00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. # Defaults: ac_help= ac_default_prefix=/usr/local # Any additions from configure.in: # Initialize some variables set by options. # The variables have the same names as the options, with # dashes changed to underlines. build=NONE cache_file=./config.cache exec_prefix=NONE host=NONE no_create= nonopt=NONE no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= target=NONE verbose= x_includes=NONE x_libraries=NONE bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datadir='${prefix}/share' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Maximum number of lines to put in a shell here document. ac_max_here_lines=12 ac_prev= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" ac_prev= continue fi case "$ac_option" in -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; *) ac_optarg= ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case "$ac_option" in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir="$ac_optarg" ;; -build | --build | --buil | --bui | --bu) ac_prev=build ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build="$ac_optarg" ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file="$ac_optarg" ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) datadir="$ac_optarg" ;; -disable-* | --disable-*) ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` eval "enable_${ac_feature}=no" ;; -enable-* | --enable-*) ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "enable_${ac_feature}='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix="$ac_optarg" ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he) # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat << EOF Usage: configure [options] [host] Options: [defaults in brackets after descriptions] Configuration: --cache-file=FILE cache test results in FILE --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [same as prefix] --bindir=DIR user executables in DIR [EPREFIX/bin] --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] --libexecdir=DIR program executables in DIR [EPREFIX/libexec] --datadir=DIR read-only architecture-independent data in DIR [PREFIX/share] --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data in DIR [PREFIX/com] --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] --libdir=DIR object code libraries in DIR [EPREFIX/lib] --includedir=DIR C header files in DIR [PREFIX/include] --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] --infodir=DIR info documentation in DIR [PREFIX/info] --mandir=DIR man documentation in DIR [PREFIX/man] --srcdir=DIR find the sources in DIR [configure dir or ..] --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names EOF cat << EOF Host type: --build=BUILD configure for building on BUILD [BUILD=HOST] --host=HOST configure for HOST [guessed] --target=TARGET configure for TARGET [TARGET=HOST] Features and packages: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --x-includes=DIR X include files are in DIR --x-libraries=DIR X library files are in DIR EOF if test -n "$ac_help"; then echo "--enable and --with options recognized:$ac_help" fi exit 0 ;; -host | --host | --hos | --ho) ac_prev=host ;; -host=* | --host=* | --hos=* | --ho=*) host="$ac_optarg" ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir="$ac_optarg" ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir="$ac_optarg" ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir="$ac_optarg" ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir="$ac_optarg" ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ | --locals | --local | --loca | --loc | --lo) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) localstatedir="$ac_optarg" ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir="$ac_optarg" ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir="$ac_optarg" ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix="$ac_optarg" ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix="$ac_optarg" ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix="$ac_optarg" ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name="$ac_optarg" ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir="$ac_optarg" ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir="$ac_optarg" ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site="$ac_optarg" ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir="$ac_optarg" ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir="$ac_optarg" ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target="$ac_optarg" ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers) echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "with_${ac_package}='$ac_optarg'" ;; -without-* | --without-*) ac_package=`echo $ac_option|sed -e 's/-*without-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` eval "with_${ac_package}=no" ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes="$ac_optarg" ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries="$ac_optarg" ;; -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } ;; *) if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then echo "configure: warning: $ac_option: invalid host type" 1>&2 fi if test "x$nonopt" != xNONE; then { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } fi nonopt="$ac_option" ;; esac done if test -n "$ac_prev"; then { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } fi trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 # File descriptor usage: # 0 standard input # 1 file creation # 2 errors and warnings # 3 some systems may open it to /dev/tty # 4 used on the Kubota Titan # 6 checking for... messages and results # 5 compiler messages saved in config.log if test "$silent" = yes; then exec 6>/dev/null else exec 6>&1 fi exec 5>./config.log echo "\ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. " 1>&5 # Strip out --no-create and --no-recursion so they do not pile up. # Also quote any args containing shell metacharacters. ac_configure_args= for ac_arg do case "$ac_arg" in -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) ac_configure_args="$ac_configure_args '$ac_arg'" ;; *) ac_configure_args="$ac_configure_args $ac_arg" ;; esac done # NLS nuisances. # Only set these to C if already set. These must not be set unconditionally # because not all systems understand e.g. LANG=C (notably SCO). # Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! # Non-C LC_CTYPE values break the ctype check. if test "${LANG+set}" = set; then LANG=C; export LANG; fi if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo > confdefs.h # A filename unique to this package, relative to the directory that # configure is in, which we can look for to find out if srcdir is correct. ac_unique_file=README # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. ac_prog=$0 ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } else { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } fi fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then echo "loading site script $ac_site_file" . "$ac_site_file" fi done if test -r "$cache_file"; then echo "loading cache $cache_file" . $cache_file else echo "creating cache $cache_file" > $cache_file fi ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross ac_exeext= ac_objext=o if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then ac_n= ac_c=' ' ac_t=' ' else ac_n=-n ac_c= ac_t= fi else ac_n= ac_c='\c' ac_t= fi ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f $ac_dir/install.sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break fi done if test -z "$ac_aux_dir"; then { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. # Make sure we can run config.sub. if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 echo "configure:552: checking host system type" >&5 host_alias=$host case "$host_alias" in NONE) case $nonopt in NONE) if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } fi ;; *) host_alias=$nonopt ;; esac ;; esac host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 echo "configure:573: checking target system type" >&5 target_alias=$target case "$target_alias" in NONE) case $nonopt in NONE) target_alias=$host_alias ;; *) target_alias=$nonopt ;; esac ;; esac target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 case "$target" in *-*-netbsd*) CPPFLAGS="${CPPFLAGS} -I/usr/pkg/include"; LDFLAGS="${LDFLAGS} -L/usr/pkg/lib -rpath/usr/pkg/lib"; ;; esac CFLAGS="$CFLAGS -Wall -O2 -pipe -fomit-frame-pointer" # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 echo "configure:611: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do if test -f $ac_dir/$ac_prog; then if test $ac_prog = install && grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : else ac_cv_path_install="$ac_dir/$ac_prog -c" break 2 fi fi done ;; esac done IFS="$ac_save_IFS" fi if test "${ac_cv_path_install+set}" = set; then INSTALL="$ac_cv_path_install" else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL="$ac_install_sh" fi fi echo "$ac_t""$INSTALL" 1>&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 echo "configure:664: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftestfile` fi if test "$*" != "X $srcdir/configure conftestfile" \ && test "$*" != "X conftestfile $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { echo "configure: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" 1>&2; exit 1; } fi test "$2" = conftestfile ) then # Ok. : else { echo "configure: error: newly created file is older than distributed files! Check your system clock" 1>&2; exit 1; } fi rm -f conftest* echo "$ac_t""yes" 1>&6 if test "$program_transform_name" = s,x,x,; then program_transform_name= else # Double any \ or $. echo might interpret backslashes. cat <<\EOF_SED > conftestsed s,\\,\\\\,g; s,\$,$$,g EOF_SED program_transform_name="`echo $program_transform_name|sed -f conftestsed`" rm -f conftestsed fi test "$program_prefix" != NONE && program_transform_name="s,^,${program_prefix},; $program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" # sed with no file args requires a program. test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 echo "configure:721: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftestmake <<\EOF all: @echo 'ac_maketemp="${MAKE}"' EOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` if test -n "$ac_maketemp"; then eval ac_cv_prog_make_${ac_make}_set=yes else eval ac_cv_prog_make_${ac_make}_set=no fi rm -f conftestmake fi if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then echo "$ac_t""yes" 1>&6 SET_MAKE= else echo "$ac_t""no" 1>&6 SET_MAKE="MAKE=${MAKE-make}" fi PACKAGE=juke VERSION=0.7 if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } fi cat >> confdefs.h <> confdefs.h <&6 echo "configure:767: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (aclocal --version) < /dev/null > /dev/null 2>&1; then ACLOCAL=aclocal echo "$ac_t""found" 1>&6 else ACLOCAL="$missing_dir/missing aclocal" echo "$ac_t""missing" 1>&6 fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 echo "configure:780: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (autoconf --version) < /dev/null > /dev/null 2>&1; then AUTOCONF=autoconf echo "$ac_t""found" 1>&6 else AUTOCONF="$missing_dir/missing autoconf" echo "$ac_t""missing" 1>&6 fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 echo "configure:793: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (automake --version) < /dev/null > /dev/null 2>&1; then AUTOMAKE=automake echo "$ac_t""found" 1>&6 else AUTOMAKE="$missing_dir/missing automake" echo "$ac_t""missing" 1>&6 fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 echo "configure:806: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (autoheader --version) < /dev/null > /dev/null 2>&1; then AUTOHEADER=autoheader echo "$ac_t""found" 1>&6 else AUTOHEADER="$missing_dir/missing autoheader" echo "$ac_t""missing" 1>&6 fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 echo "configure:819: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (makeinfo --version) < /dev/null > /dev/null 2>&1; then MAKEINFO=makeinfo echo "$ac_t""found" 1>&6 else MAKEINFO="$missing_dir/missing makeinfo" echo "$ac_t""missing" 1>&6 fi echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 echo "configure:837: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftestmake <<\EOF all: @echo 'ac_maketemp="${MAKE}"' EOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` if test -n "$ac_maketemp"; then eval ac_cv_prog_make_${ac_make}_set=yes else eval ac_cv_prog_make_${ac_make}_set=no fi rm -f conftestmake fi if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then echo "$ac_t""yes" 1>&6 SET_MAKE= else echo "$ac_t""no" 1>&6 SET_MAKE="MAKE=${MAKE-make}" fi # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:866: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" break fi done IFS="$ac_save_ifs" fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:896: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" break fi done IFS="$ac_save_ifs" if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# -gt 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift set dummy "$ac_dir/$ac_word" "$@" shift ac_cv_prog_CC="$@" fi fi fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$CC"; then case "`uname -s`" in *win32* | *WIN32*) # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:947: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" break fi done IFS="$ac_save_ifs" fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi ;; esac fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 echo "configure:979: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF #line 990 "configure" #include "confdefs.h" main(){return(0);} EOF if { (eval echo configure:995: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then ac_cv_prog_cc_cross=no else ac_cv_prog_cc_cross=yes fi else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_prog_cc_works=no fi rm -fr conftest* ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 echo "configure:1021: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 echo "configure:1026: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no fi fi echo "$ac_t""$ac_cv_prog_gcc" 1>&6 if test $ac_cv_prog_gcc = yes; then GCC=yes else GCC= fi ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 echo "configure:1054: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then ac_cv_prog_cc_g=yes else ac_cv_prog_cc_g=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 if test "$ac_test_CFLAGS" = set; then CFLAGS="$ac_save_CFLAGS" elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 echo "configure:1097: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do if test -f $ac_dir/$ac_prog; then if test $ac_prog = install && grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : else ac_cv_path_install="$ac_dir/$ac_prog -c" break 2 fi fi done ;; esac done IFS="$ac_save_IFS" fi if test "${ac_cv_path_install+set}" = set; then INSTALL="$ac_cv_path_install" else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL="$ac_install_sh" fi fi echo "$ac_t""$INSTALL" 1>&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking for main in -lncurses""... $ac_c" 1>&6 echo "configure:1151: checking for main in -lncurses" >&5 ac_lib_var=`echo ncurses'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lncurses $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo ncurses | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 exit fi ac_header_dirent=no for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6 echo "configure:1200: checking for $ac_hdr that defines DIR" >&5 if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include <$ac_hdr> int main() { DIR *dirp = 0; ; return 0; } EOF if { (eval echo configure:1213: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* eval "ac_cv_header_dirent_$ac_safe=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_dirent_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. if test $ac_header_dirent = dirent.h; then echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6 echo "configure:1238: checking for opendir in -ldir" >&5 ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldir $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBS="$LIBS -ldir" else echo "$ac_t""no" 1>&6 fi else echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6 echo "configure:1279: checking for opendir in -lx" >&5 ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lx $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBS="$LIBS -lx" else echo "$ac_t""no" 1>&6 fi fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 echo "configure:1321: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # This must be in double quotes, not single quotes, because CPP may get # substituted into the Makefile and "${CC-cc}" will confuse make. CPP="${CC-cc} -E" # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1342: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1359: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1376: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP=/lib/cpp fi rm -f conftest* fi rm -f conftest* fi rm -f conftest* ac_cv_prog_CPP="$CPP" fi CPP="$ac_cv_prog_CPP" else ac_cv_prog_CPP="$CPP" fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 echo "configure:1401: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include #include #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1414: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* ac_cv_header_stdc=yes else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "memchr" >/dev/null 2>&1; then : else rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "free" >/dev/null 2>&1; then : else rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') #define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF if { (eval echo configure:1481: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_header_stdc=no fi rm -fr conftest* fi fi fi echo "$ac_t""$ac_cv_header_stdc" 1>&6 if test $ac_cv_header_stdc = yes; then cat >> confdefs.h <<\EOF #define STDC_HEADERS 1 EOF fi echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6 echo "configure:1505: checking for sys/wait.h that is POSIX.1 compatible" >&5 if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include #ifndef WEXITSTATUS #define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8) #endif #ifndef WIFEXITED #define WIFEXITED(stat_val) (((stat_val) & 255) == 0) #endif int main() { int s; wait (&s); s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; ; return 0; } EOF if { (eval echo configure:1526: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_header_sys_wait_h=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_header_sys_wait_h=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_header_sys_wait_h" 1>&6 if test $ac_cv_header_sys_wait_h = yes; then cat >> confdefs.h <<\EOF #define HAVE_SYS_WAIT_H 1 EOF fi for ac_hdr in fcntl.h unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:1550: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1560: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done echo $ac_n "checking for pid_t""... $ac_c" 1>&6 echo "configure:1588: checking for pid_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS #include #include #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_pid_t=yes else rm -rf conftest* ac_cv_type_pid_t=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_pid_t" 1>&6 if test $ac_cv_type_pid_t = no; then cat >> confdefs.h <<\EOF #define pid_t int EOF fi echo $ac_n "checking whether setpgrp takes no argument""... $ac_c" 1>&6 echo "configure:1622: checking whether setpgrp takes no argument" >&5 if eval "test \"`echo '$''{'ac_cv_func_setpgrp_void'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then { echo "configure: error: cannot check setpgrp if cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext < #endif /* * If this system has a BSD-style setpgrp, which takes arguments, exit * successfully. */ main() { if (setpgrp(1,1) == -1) exit(0); else exit(1); } EOF if { (eval echo configure:1650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_setpgrp_void=no else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_func_setpgrp_void=yes fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_func_setpgrp_void" 1>&6 if test $ac_cv_func_setpgrp_void = yes; then cat >> confdefs.h <<\EOF #define SETPGRP_VOID 1 EOF fi for ac_func in getcwd do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:1676: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:1704: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 fi done trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs. It is not useful on other systems. # If it contains results you don't want to keep, you may remove or edit it. # # By default, configure uses ./config.cache as the cache file, # creating it if it does not exist already. You can give configure # the --cache-file=FILE option to use a different cache file; that is # what configure does when it calls configure scripts in # subdirectories, so they share the cache. # Giving --cache-file=/dev/null disables caching, for debugging configure. # config.status only pays attention to the cache file if you give it the # --recheck option to rerun configure. # EOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). sed -n \ -e "s/'/'\\\\''/g" \ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' ;; esac >> confcache if cmp -s $cache_file confcache; then : else if test -w $cache_file; then echo "updating cache $cache_file" cat confcache > $cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # Any assignment to VPATH causes Sun make to only execute # the first set of double-colon rules, so remove it if not needed. # If there is a colon in the path, we need to keep it. if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' fi trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 DEFS=-DHAVE_CONFIG_H # Without the "./", some shells look in PATH for config.status. : ${CONFIG_STATUS=./config.status} echo creating $CONFIG_STATUS rm -f $CONFIG_STATUS cat > $CONFIG_STATUS </dev/null | sed 1q`: # # $0 $ac_configure_args # # Compiler output produced by configure, useful for debugging # configure, is in ./config.log if it exists. ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" for ac_option do case "\$ac_option" in -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; *) echo "\$ac_cs_usage"; exit 1 ;; esac done ac_given_srcdir=$srcdir ac_given_INSTALL="$INSTALL" trap 'rm -fr `echo "Makefile src/Makefile doc/Makefile config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 EOF cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF $ac_vpsub $extrasub s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g s%@exec_prefix@%$exec_prefix%g s%@prefix@%$prefix%g s%@program_transform_name@%$program_transform_name%g s%@bindir@%$bindir%g s%@sbindir@%$sbindir%g s%@libexecdir@%$libexecdir%g s%@datadir@%$datadir%g s%@sysconfdir@%$sysconfdir%g s%@sharedstatedir@%$sharedstatedir%g s%@localstatedir@%$localstatedir%g s%@libdir@%$libdir%g s%@includedir@%$includedir%g s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g s%@host_vendor@%$host_vendor%g s%@host_os@%$host_os%g s%@target@%$target%g s%@target_alias@%$target_alias%g s%@target_cpu@%$target_cpu%g s%@target_vendor@%$target_vendor%g s%@target_os@%$target_os%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@PACKAGE@%$PACKAGE%g s%@VERSION@%$VERSION%g s%@ACLOCAL@%$ACLOCAL%g s%@AUTOCONF@%$AUTOCONF%g s%@AUTOMAKE@%$AUTOMAKE%g s%@AUTOHEADER@%$AUTOHEADER%g s%@MAKEINFO@%$MAKEINFO%g s%@SET_MAKE@%$SET_MAKE%g s%@CC@%$CC%g s%@CPP@%$CPP%g CEOF EOF cat >> $CONFIG_STATUS <<\EOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. ac_file=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_cmds # Line after last line for current file. ac_more_lines=: ac_sed_cmds="" while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file else sed "${ac_end}q" conftest.subs > conftest.s$ac_file fi if test ! -s conftest.s$ac_file; then ac_more_lines=false rm -f conftest.s$ac_file else if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f conftest.s$ac_file" else ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" fi ac_file=`expr $ac_file + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_cmds` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" # A "../" for each directory in $ac_dir_suffix. ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` else ac_dir_suffix= ac_dots= fi case "$ac_given_srcdir" in .) srcdir=. if test -z "$ac_dots"; then top_srcdir=. else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; *) # Relative path. srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" top_srcdir="$ac_dots$ac_given_srcdir" ;; esac case "$ac_given_INSTALL" in [/$]*) INSTALL="$ac_given_INSTALL" ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." case "$ac_file" in *Makefile*) ac_comsub="1i\\ # $configure_input" ;; *) ac_comsub= ;; esac ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g " $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file fi; done rm -f conftest.s* # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' ac_dC='\3' ac_dD='%g' # ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_uB='\([ ]\)%\1#\2define\3' ac_uC=' ' ac_uD='\4%g' # ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_eB='$%\1#\2define\3' ac_eC=' ' ac_eD='%g' if test "${CONFIG_HEADERS+set}" != set; then EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF fi for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac echo creating $ac_file rm -f conftest.frag conftest.in conftest.out ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` cat $ac_file_inputs > conftest.in EOF # Transform confdefs.h into a sed script conftest.vals that substitutes # the proper values into config.h.in to produce config.h. And first: # Protect against being on the right side of a sed subst in config.status. # Protect against being in an unquoted here document in config.status. rm -f conftest.vals cat > conftest.hdr <<\EOF s/[\\&%]/\\&/g s%[\\$`]%\\&%g s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp s%ac_d%ac_u%gp s%ac_u%ac_e%gp EOF sed -n -f conftest.hdr confdefs.h > conftest.vals rm -f conftest.hdr # This sed command replaces #undef with comments. This is necessary, for # example, in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. cat >> conftest.vals <<\EOF s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% EOF # Break up conftest.vals because some shells have a limit on # the size of here documents, and old seds have small limits too. rm -f conftest.tail while : do ac_lines=`grep -c . conftest.vals` # grep -c gives empty output for an empty file on some AIX systems. if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi # Write a limited-size here document to conftest.frag. echo ' cat > conftest.frag <> $CONFIG_STATUS sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS echo 'CEOF sed -f conftest.frag conftest.in > conftest.out rm -f conftest.in mv conftest.out conftest.in ' >> $CONFIG_STATUS sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail rm -f conftest.vals mv conftest.tail conftest.vals done rm -f conftest.vals cat >> $CONFIG_STATUS <<\EOF rm -f conftest.frag conftest.h echo "/* $ac_file. Generated automatically by configure. */" > conftest.h cat conftest.in >> conftest.h rm -f conftest.in if cmp -s $ac_file conftest.h 2>/dev/null; then echo "$ac_file is unchanged" rm -f conftest.h else # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" fi rm -f $ac_file mv conftest.h $ac_file fi fi; done EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h exit 0 EOF chmod +x $CONFIG_STATUS rm -fr confdefs* $ac_clean_files test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 juke-0.7.orig/configure.in0000644000000000000000000000154210101601072015512 0ustar rootroot00000000000000dnl Process this file with autoconf to produce a configure script. AC_INIT(README) dnl Check system type AC_CANONICAL_HOST AC_CANONICAL_TARGET case "$target" in *-*-netbsd*) CPPFLAGS="${CPPFLAGS} -I/usr/pkg/include"; LDFLAGS="${LDFLAGS} -L/usr/pkg/lib -rpath/usr/pkg/lib"; ;; esac dnl Set CFLAGS CFLAGS="$CFLAGS -Wall -O2 -pipe -fomit-frame-pointer" AM_INIT_AUTOMAKE(juke, 0.7) AM_CONFIG_HEADER(config.h) dnl Checks for programs. AC_PROG_MAKE_SET AC_PROG_CC AC_PROG_INSTALL dnl Checks for libraries. AC_CHECK_LIB(ncurses,main,,[exit]) dnl Checks for header files. AC_HEADER_DIRENT AC_HEADER_STDC AC_HEADER_SYS_WAIT AC_CHECK_HEADERS(fcntl.h unistd.h) dnl Checks for typedefs, structures, and compiler characteristics. AC_TYPE_PID_T dnl Checks for library functions. AC_FUNC_SETPGRP AC_CHECK_FUNCS(getcwd) AC_OUTPUT(Makefile src/Makefile doc/Makefile) juke-0.7.orig/install-sh0000755000000000000000000001272010101601072015205 0ustar rootroot00000000000000#!/bin/sh # # install - install a program, script, or datafile # This comes from X11R5 (mit/util/scripts/install.sh). # # Copyright 1991 by the Massachusetts Institute of Technology # # Permission to use, copy, modify, distribute, and sell this software and its # documentation for any purpose is hereby granted without fee, provided that # the above copyright notice appear in all copies and that both that # copyright notice and this permission notice appear in supporting # documentation, and that the name of M.I.T. not be used in advertising or # publicity pertaining to distribution of the software without specific, # written prior permission. M.I.T. makes no representations about the # suitability of this software for any purpose. It is provided "as is" # without express or implied warranty. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" chmodprog="${CHMODPROG-chmod}" chownprog="${CHOWNPROG-chown}" chgrpprog="${CHGRPPROG-chgrp}" stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" transformbasename="" transform_arg="" instcmd="$mvprog" chmodcmd="$chmodprog 0755" chowncmd="" chgrpcmd="" stripcmd="" rmcmd="$rmprog -f" mvcmd="$mvprog" src="" dst="" dir_arg="" while [ x"$1" != x ]; do case $1 in -c) instcmd="$cpprog" shift continue;; -d) dir_arg=true shift continue;; -m) chmodcmd="$chmodprog $2" shift shift continue;; -o) chowncmd="$chownprog $2" shift shift continue;; -g) chgrpcmd="$chgrpprog $2" shift shift continue;; -s) stripcmd="$stripprog" shift continue;; -t=*) transformarg=`echo $1 | sed 's/-t=//'` shift continue;; -b=*) transformbasename=`echo $1 | sed 's/-b=//'` shift continue;; *) if [ x"$src" = x ] then src=$1 else # this colon is to work around a 386BSD /bin/sh bug : dst=$1 fi shift continue;; esac done if [ x"$src" = x ] then echo "install: no input file specified" exit 1 else true fi if [ x"$dir_arg" != x ]; then dst=$src src="" if [ -d $dst ]; then instcmd=: else instcmd=mkdir fi else # Waiting for this to be detected by the "$instcmd $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if [ -f $src -o -d $src ] then true else echo "install: $src does not exist" exit 1 fi if [ x"$dst" = x ] then echo "install: no destination specified" exit 1 else true fi # If destination is a directory, append the input filename; if your system # does not like double slashes in filenames, you may need to add some logic if [ -d $dst ] then dst="$dst"/`basename $src` else true fi fi ## this sed command emulates the dirname command dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Make sure that the destination directory exists. # this part is taken from Noah Friedman's mkinstalldirs script # Skip lots of stat calls in the usual case. if [ ! -d "$dstdir" ]; then defaultIFS=' ' IFS="${IFS-${defaultIFS}}" oIFS="${IFS}" # Some sh's can't handle IFS=/ for some reason. IFS='%' set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` IFS="${oIFS}" pathcomp='' while [ $# -ne 0 ] ; do pathcomp="${pathcomp}${1}" shift if [ ! -d "${pathcomp}" ] ; then $mkdirprog "${pathcomp}" else true fi pathcomp="${pathcomp}/" done fi if [ x"$dir_arg" != x ] then $doit $instcmd $dst && if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi else # If we're going to rename the final executable, determine the name now. if [ x"$transformarg" = x ] then dstfile=`basename $dst` else dstfile=`basename $dst $transformbasename | sed $transformarg`$transformbasename fi # don't allow the sed command to completely eliminate the filename if [ x"$dstfile" = x ] then dstfile=`basename $dst` else true fi # Make a temp file name in the proper directory. dsttmp=$dstdir/#inst.$$# # Move or copy the file name to the temp name $doit $instcmd $src $dsttmp && trap "rm -f ${dsttmp}" 0 && # and set any options; do chmod last to preserve setuid bits # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $instcmd $src $dsttmp" command. if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && # Now rename the file to the real destination. $doit $rmcmd -f $dstdir/$dstfile && $doit $mvcmd $dsttmp $dstdir/$dstfile fi && exit 0 juke-0.7.orig/missing0000755000000000000000000001420210101601072014575 0ustar rootroot00000000000000#! /bin/sh # Common stub for a few missing GNU programs while installing. # Copyright (C) 1996, 1997 Free Software Foundation, Inc. # Franc,ois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi case "$1" in -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file yacc create \`y.tab.[ch]', if possible, from existing .[ch]" ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing - GNU libit 0.0" ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; aclocal) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`acinclude.m4' or \`configure.in'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`configure.in'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`acconfig.h' or \`configure.in'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER([^):]*:\([^)]*\)).*/\1/p' configure.in` if test -z "$files"; then files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^):]*\)).*/\1/p' configure.in` test -z "$files" || files="$files.in" else files=`echo "$files" | sed -e 's/:/ /g'` fi test -z "$files" && files="config.h.in" touch $files ;; automake) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print \ | sed 's/^\(.*\).am$/touch \1.in/' \ | sh ;; bison|yacc) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.h fi ;; esac fi if [ ! -f y.tab.h ]; then echo >y.tab.h fi if [ ! -f y.tab.c ]; then echo 'main() { return 0; }' >y.tab.c fi ;; lex|flex) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if [ ! -f lex.yy.c ]; then echo 'main() { return 0; }' >lex.yy.c fi ;; makeinfo) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` fi touch $file ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and you do not seem to have it handy on your system. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequirements for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 juke-0.7.orig/mkinstalldirs0000755000000000000000000000133010101601072016002 0ustar rootroot00000000000000#! /bin/sh # mkinstalldirs --- make directory hierarchy # Author: Noah Friedman # Created: 1993-05-16 # Public domain # $Id: mkinstalldirs,v 1.2 1999/04/15 19:36:42 johan Exp $ errstatus=0 for file do set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` shift pathcomp= for d do pathcomp="$pathcomp$d" case "$pathcomp" in -* ) pathcomp=./$pathcomp ;; esac if test ! -d "$pathcomp"; then echo "mkdir $pathcomp" 1>&2 mkdir "$pathcomp" || lasterr=$? if test ! -d "$pathcomp"; then errstatus=$lasterr fi fi pathcomp="$pathcomp/" done done exit $errstatus # mkinstalldirs ends here juke-0.7.orig/BUGS0000644000000000000000000000070010101601072013657 0ustar rootroot00000000000000NUMBER: 1 STATUS: DESC: Circular links in the file system are not detected. NUMBER: 2 STATUS: DESC: The refresh call that has been commented in tui.c should not be needed. If it's left out the screen sometimes get messed up. NUMBER: 3 STATUS: DESC: Quit question and help screen are blocking. The window is not updated when resized and the next tune can't be fetched from queue. NUMBER: 4 STATUS: DESC: Resize (SIGWINCH) does not work properly. juke-0.7.orig/LIMITATIONS0000644000000000000000000000144410101601072014721 0ustar rootroot00000000000000There are some requirement that have to be met by a player if it's to work with juke. 1) If the player uses multiple processes (many do). It have to return an error code from its main process if it fails to open an audio device. The error code must have at least one of the lower eight bits set. 2) The player must exit cleanly if an audio device is busy. 3) The player must be able to handle the SIGSTOP and SIGCONT signals. 4) The player must exit on SIGTERM (I figure most does). Player Problem Comment ====== ======= ======= amp 1 Can be used with the flag -nobuffer mikmod 2 xmp 3 bplay other Gets "semget: No space left on device" messages after using the program for a while. mpg123 ok psgplay ok play ok play is a shell script front-end to sox juke-0.7.orig/MANUAL0000644000000000000000000000307510101601072014104 0ustar rootroot00000000000000Juke - A Juke Box ================= 1 Introduction Juke is a curses/ ncurses based juke box program for Unix computers. The program uses command line base player to play all kinds of different music files. 2 Configuration Juke uses a configuration file called juke.conf to specifiy which program is to be associated with a certain file format. Here is a sample file. # Sample juke configuration file # @ is replaced by juke with the file to play .mp3 mpg123 -b 128 -q @ .xm mikmod -o -n -q @ .mod mikmod -o -n -q @ .psg psgplay -q @ I hope that the format is kind of self explaining. The configuration file can be saved as /etc/juke.conf or ~/.juke.conf. The later is used if both files exists. 3 Usage Juke is started with one or more directories as parameters. The directories are scanned for files specified in the configuration file. Juke have two modes of operation. The items mode that is a directory tree listning and the queue mode that is the tunes that are scheduled for playing. Here are the keys used. a Add item to queue b Page up c Clear queue d Delete item from queue h Help message i, up Move cursor up j, left Enter directory at cursor position k, down Move cursor down l, right Leave current directory m Move item to top of queue p Pause player q Quit r Randomize items in queue s Skip playing item t Toggle display mode space Page down Well thats it. The latest version should always be available at http://www.nocrew.org/software/juke. juke-0.7.orig/juke.conf0000644000000000000000000000047510101601072015012 0ustar rootroot00000000000000# Sample juke configuration file # @ is replaced by juke with the file to play .mp3 mpg123 -b 1024 -q @ .wav play @ .psg psgplay -q @ .669 xmp -q @ .alm xmp -q @ .amd xmp -q @ .far xmp -q @ .mod xmp -q @ .mtm xmp -q @ .okt xmp -q @ .ptm xmp -q @ .rad xmp -q @ .s3m xmp -q @ .stm xmp -q @ .wow xmp -q @ .xm xmp -q @ juke-0.7.orig/src/0000755000000000000000000000000010101601072013766 5ustar rootroot00000000000000juke-0.7.orig/src/Makefile.in0000644000000000000000000001700010101601072016031 0ustar rootroot00000000000000# Makefile.in generated automatically by automake 1.4 from Makefile.am # Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include DESTDIR = pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ CC = @CC@ MAKEINFO = @MAKEINFO@ PACKAGE = @PACKAGE@ VERSION = @VERSION@ bin_PROGRAMS = juke juke_SOURCES = conf.c conf.h dir.c dir.h err.c err.h juke.c mem.c mem.h player.c player.h queue.c queue.h tui.c tui.h EXTRA_DIST = FILES mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = ../config.h CONFIG_CLEAN_FILES = PROGRAMS = $(bin_PROGRAMS) DEFS = @DEFS@ -I. -I$(srcdir) -I.. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ juke_OBJECTS = conf.o dir.o err.o juke.o mem.o player.o queue.o tui.o juke_LDADD = $(LDADD) juke_DEPENDENCIES = juke_LDFLAGS = CFLAGS = @CFLAGS@ COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ DIST_COMMON = Makefile.am Makefile.in DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) TAR = tar GZIP_ENV = --best SOURCES = $(juke_SOURCES) OBJECTS = $(juke_OBJECTS) all: all-redirect .SUFFIXES: .SUFFIXES: .S .c .o .s $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && $(AUTOMAKE) --foreign --include-deps src/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status mostlyclean-binPROGRAMS: clean-binPROGRAMS: -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) distclean-binPROGRAMS: maintainer-clean-binPROGRAMS: install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(bindir) @list='$(bin_PROGRAMS)'; for p in $$list; do \ if test -f $$p; then \ echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ else :; fi; \ done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) list='$(bin_PROGRAMS)'; for p in $$list; do \ rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ done .c.o: $(COMPILE) -c $< .s.o: $(COMPILE) -c $< .S.o: $(COMPILE) -c $< mostlyclean-compile: -rm -f *.o core *.core clean-compile: distclean-compile: -rm -f *.tab.c maintainer-clean-compile: juke: $(juke_OBJECTS) $(juke_DEPENDENCIES) @rm -f juke $(LINK) $(juke_LDFLAGS) $(juke_OBJECTS) $(juke_LDADD) $(LIBS) tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ here=`pwd` && cd $(srcdir) \ && mkid -f$$here/ID $$unique $(LISP) TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) mostlyclean-tags: clean-tags: distclean-tags: -rm -f TAGS ID maintainer-clean-tags: distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) subdir = src distdir: $(DISTFILES) @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done conf.o: conf.c conf.h err.h mem.h dir.o: dir.c conf.h dir.h err.h mem.h err.o: err.c juke.o: juke.c conf.h dir.h err.h mem.h queue.h tui.h mem.o: mem.c err.h player.o: player.c ../config.h conf.h dir.h err.h player.h queue.h queue.o: queue.c conf.h dir.h mem.h queue.h tui.o: tui.c ../config.h conf.h dir.h err.h mem.h player.h queue.h tui.h info-am: info: info-am dvi-am: dvi: dvi-am check-am: all-am check: check-am installcheck-am: installcheck: installcheck-am install-exec-am: install-binPROGRAMS install-exec: install-exec-am install-data-am: install-data: install-data-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-am uninstall-am: uninstall-binPROGRAMS uninstall: uninstall-am all-am: Makefile $(PROGRAMS) all-redirect: all-am install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: $(mkinstalldirs) $(DESTDIR)$(bindir) mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \ mostlyclean-tags mostlyclean-generic mostlyclean: mostlyclean-am clean-am: clean-binPROGRAMS clean-compile clean-tags clean-generic \ mostlyclean-am clean: clean-am distclean-am: distclean-binPROGRAMS distclean-compile distclean-tags \ distclean-generic clean-am distclean: distclean-am maintainer-clean-am: maintainer-clean-binPROGRAMS \ maintainer-clean-compile maintainer-clean-tags \ maintainer-clean-generic distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am .PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \ maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \ mostlyclean-compile distclean-compile clean-compile \ maintainer-clean-compile tags mostlyclean-tags distclean-tags \ clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \ check-am installcheck-am installcheck install-exec-am install-exec \ install-data-am install-data install-am install uninstall-am uninstall \ all-redirect all-am all installdirs mostlyclean-generic \ distclean-generic clean-generic maintainer-clean-generic clean \ mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: juke-0.7.orig/src/Makefile.am0000644000000000000000000000023510101601072016022 0ustar rootroot00000000000000bin_PROGRAMS = juke juke_SOURCES = conf.c conf.h dir.c dir.h err.c err.h juke.c mem.c mem.h player.c player.h queue.c queue.h tui.c tui.h EXTRA_DIST = FILES juke-0.7.orig/src/conf.c0000644000000000000000000001037510101601072015065 0ustar rootroot00000000000000#include #include #include #include #include #include "conf.h" #include "err.h" #include "mem.h" /* Allocates memory and loads a file, returns file length */ static int load_file (char *path, void **mem) { int fd, len; if ((fd = open (path, O_RDONLY)) == -1) return ERROR; len = lseek (fd, 0, SEEK_END); lseek (fd, 0, SEEK_SET); mem_resize (mem, len); if (read (fd, *mem, len) != len) { free (*mem); *mem = 0; close (fd); return ERROR; } close (fd); return len; } /* Returns ERROR if there are no more lines */ static int next_line (struct CONFIG *cfg) { while (cfg->line_pos < cfg->file_len){ if (cfg->file[cfg->line_pos] == 10) { cfg->line_pos++; break; } cfg->line_pos++; } if (cfg->line_pos >= cfg->file_len) return ERROR; return E_OK; } /* Returns ERROR if there are no characters on the line */ static int set_line_end (struct CONFIG *cfg) { char c; int pos = cfg->line_pos; while (pos < cfg->file_len) { c = cfg->file[pos]; if (c == 10 || c == '#') { pos--; break; } pos++; } if (pos < cfg->line_pos) return ERROR; cfg->line_end = pos; return E_OK; } /* Returns ERROR if there are no more arguments */ static int next_arg (struct CONFIG *cfg) { char c; while (cfg->arg_pos <= cfg->line_end) { c = cfg->file[cfg->arg_pos]; if (c != 9 && c != 32) break; cfg->arg_pos++; } if (cfg->arg_pos > cfg->line_end) return ERROR; return E_OK; } /* Returns length of argument */ static int get_arg_len (struct CONFIG *cfg) { int c, len = 0; while (cfg->arg_pos <= cfg->line_end) { c = cfg->file[cfg->arg_pos]; if (c == 9 || c == 32) break; cfg->arg_pos++; len++; } return len; } static void evaluate (struct CONFIG *cfg) { int arg_pos, arg_len, args, fno = 0, str_len, i; char *s1 = 0, *s2; do { if (set_line_end (cfg) == E_OK) { cfg->arg_pos = cfg->line_pos; args = 0; str_len = 0; while (next_arg (cfg) != ERROR) { arg_pos = cfg->arg_pos; arg_len = get_arg_len (cfg); if (!args) { fno = cfg->formats; cfg->formats++; mem_resize ((void **)&cfg->format, cfg->formats * sizeof (struct CFG_FORMAT)); s1 = cfg->format[fno].strings; } str_len += arg_len + 1; if (str_len > CFG_STRLEN) { fprintf (stderr, "error: Arguments in juke.conf longer " "than %d characters\n", CFG_STRLEN); exit (ERROR); } s2 = cfg->file + arg_pos; for (i=arg_len; i>0;i--) *s1++ = *s2++; *s1++ = 0; args++; if (args > CFG_ARGS) { fprintf (stderr, "error: Arguments in juke.conf more " "than %d\n", CFG_ARGS); exit (ERROR); } } cfg->format[fno].args = args; cfg->format[fno].match_len = strlen (cfg->format[fno].strings); } } while (next_line (cfg) == E_OK); } static void build_arg_lists (struct CONFIG *cfg) { int i, j, pos, len; for (i=0;iformats;i++) { pos = cfg->format[i].match_len + 1; for (j=0; jformat[i].args-1; j++) { len = strlen (cfg->format[i].strings + pos); cfg->format[i].arg_list[j] = cfg->format[i].strings + pos; pos += len + 1; } cfg->format[i].arg_list[j+1] = 0; } } void config_load (struct CONFIG *cfg) { char *home, config[]="/.juke.conf", *str = 0; int str_len; if ((home = getenv ("HOME"))) { str_len = strlen (home) + strlen (config) + 1; mem_resize ((void *)&str, str_len); *str = 0; strcat (str, home); strcat (str, config); cfg->file_len = load_file (str, (void **)&cfg->file); free (str); if (cfg->file_len != ERROR) { evaluate (cfg); if (! cfg->formats) { fprintf (stderr, "error: No formats in ~/.juke.conf\n"); exit (ERROR); } build_arg_lists (cfg); free (cfg->file); return; } } cfg->file_len = load_file ("/etc/juke.conf", (void **)&cfg->file); if (cfg->file_len != ERROR) { evaluate (cfg); if (! cfg->formats) { fprintf (stderr, "error: No formats in /etc/juke.conf\n"); exit (ERROR); } build_arg_lists (cfg); free (cfg->file); } else { fprintf (stderr, "error: Could not find any configuration file\n"); exit (ERROR); } } juke-0.7.orig/src/conf.h0000644000000000000000000000053110101601072015063 0ustar rootroot00000000000000#define CFG_ARGS 10 #define CFG_STRLEN 100 struct CFG_FORMAT { int args; int match_len; char *arg_list[CFG_ARGS]; char strings[CFG_STRLEN]; }; struct CONFIG { char *file; int file_len; int line_pos; int line_end; int arg_pos; int formats; struct CFG_FORMAT *format; }; void config_load (struct CONFIG *cfg); juke-0.7.orig/src/dir.c0000644000000000000000000001627510101601072014723 0ustar rootroot00000000000000#include #include #include #include #include #include "conf.h" #include "dir.h" #include "err.h" #include "mem.h" /* The reason for this routine is that xterm/ curses fucks * up on some configurations if feed with non ascii characters. */ static void ascii_memcpy (char *to, char *from, int n) { int c; for (;n>0;n--) { c = *from++; if (c < 32 || c > 126) c = '?'; *to++ = c; } } /* Returns ERROR for no match */ static int match_format (struct CONFIG *cfg, char *s) { int l, ml, i, j; char *s2, *m; l = strlen (s); for (i=0; iformats; i++) { m = cfg->format[i].strings; ml = cfg->format[i].match_len; if (l >= ml) { s2 = s + l - ml; for (j=0; jformats) i = ERROR; return i; } static int is_dir (char *path) { struct stat buf; if (!stat (path, &buf)) { if (buf.st_mode &= S_IFDIR) return 1; } return 0; } static int is_file (char *path) { struct stat buf; if (!stat (path, &buf)) { if (buf.st_mode &= S_IFREG) return 1; } return 0; } /* Return 1 if string b is less than string a. * a and b are not null terminated so I can't use strcmp. */ static int swap (char *a, char *b, int as, int bs) { int i, f = 0, n; if (as < bs) n = as; else n = bs; for (i=0;i b[i]) { f = 1; break; } if (a[i] < b[i]) break; } if (f) return 1; if (i == n) { if (as > bs) return 1; } return 0; } /* Sort directory by type and alphabeticaly. */ static void sort (struct DIR_INFO *dinfo, int parent) { char *a, *b; int *list_old = 0, *list_new = 0, items, i, j, k, f, t, as, bs; struct DIR_ITEM *dir_items = 0; items = dir_count_parent (dinfo, parent); if (!items) return; mem_resize ((void **)&list_old, sizeof(int) * items); mem_resize ((void **)&list_new, sizeof(int) * items); mem_resize ((void **)&dir_items, sizeof(struct DIR_ITEM) * items); i = 0; j = 0; while ((i = dir_match_parent (dinfo, parent, i)) != -1) { list_old[j] = i; list_new[j++] = i++; } do { f=0; for (i=0; iitem[j].type > dinfo->item[k].type) { t = list_new[i]; list_new[i] = list_new[i+1]; list_new[i+1] = t; f = 1; } } } while (f); do { f = 0; for (i=0; iitem[j].type == dinfo->item[k].type) { a = dinfo->strings + dinfo->item[j].offset; b = dinfo->strings + dinfo->item[k].offset; as = dinfo->item[j].size; bs = dinfo->item[k].size; if (swap (a, b, as, bs)) { t = list_new[i]; list_new[i] = list_new[i+1]; list_new[i+1] = t; f = 1; } } } } while (f); for (i=0; iitem[list_new[i]]; for (i=0; iitem[list_old[i]] = dir_items[i]; free (list_old); free (list_new); free (dir_items); } /* Returns position of added entry. */ static int add_item (struct DIR_INFO *dinfo, char *name, int type, int tree, int level, int parent) { int num, size, old_size; struct DIR_ITEM *ditem; num = dinfo->items; size = sizeof(struct DIR_ITEM) * (num + 1); mem_resize ((void *)&dinfo->item, size); ditem = &dinfo->item[num]; dinfo->items = num + 1; size = strlen (name); old_size = dinfo->size; dinfo->size += size; mem_resize ((void *)&dinfo->strings, dinfo->size); ascii_memcpy (dinfo->strings + old_size, name, size); ditem->queued = 0; ditem->type = type; ditem->tree = tree; ditem->level = level; ditem->parent = parent; ditem->offset = old_size; ditem->size = size; return num; } /* Return -1 for error */ static int add_items (struct DIR_INFO *dinfo, struct CONFIG *cfg, char *path, int tree, int level, int parent) { int format; DIR *dir; struct dirent *d; if (!(dir = opendir (path))) return ERROR; if (chdir (path)) return ERROR; while ((d = readdir (dir))) { if (is_dir (d->d_name) & (d->d_name[0] != '.')) { add_item (dinfo, d->d_name, 0, tree, level, parent); } else { if (is_file (d->d_name)) { format = match_format (cfg, d->d_name); if (format != ERROR) { add_item (dinfo, d->d_name, format + 1, tree, level, parent); dinfo->files++; } } } } closedir (dir); sort (dinfo, parent); return E_OK; } /* Return position or -1 for not found */ static int find_dir (struct DIR_INFO *dinfo, int tree, int level, int start_dir) { int i; for (i=start_dir; iitems; i++) { if (dinfo->item[i].tree == tree) { if (dinfo->item[i].level == level) { if (! dinfo->item[i].type) return i; } } } return ERROR; } /* Builds path to item, returns malloced memory */ char *dir_build_path (struct DIR_INFO *dinfo, int item) { char *str = 0, *str2, *str3; int db_n = 0, str_s = 0, i, j; struct DIR_BUILD *db = 0; struct DIR_ITEM *di = &dinfo->item[item]; db_n = di->level + 1; mem_resize ((void *)&db, db_n * sizeof(struct DIR_BUILD)); for (i=0;istrings + di->offset; db[i].size = di->size; str_s += di->size + 1; di = &dinfo->item[di->parent]; } str_s++; mem_resize ((void *)&str, str_s); str2 = str; for (i=db_n-1;i>=0;i--) { str3 = db[i].name; for (j=db[i].size;j>0;j--) *str2++ = *str3++; if (i) { *str2++ = '/'; } } *str2 = 0; free (db); return str; } /* Returns -1 if path can't be opened */ int dir_recurse (struct DIR_INFO *dinfo, struct CONFIG *cfg, char *path, int tree) { int level = 0, level_hits = 0, epos; char *s, opath[1025]; DIR *dir; dir = opendir (path); if (!dir) return ERROR; epos = add_item (dinfo, path, 0, tree, level, -1); closedir (dir); if (! getcwd (opath, 1025)) /* should use PATH_MAX */ return ERROR; do { if (epos == ERROR) { level++; level_hits = 0; epos = 0; } epos = find_dir (dinfo, tree, level, epos); if (epos != ERROR) { s = dir_build_path (dinfo, epos); add_items (dinfo, cfg, s, tree, level + 1, epos); free (s); chdir (opath); level_hits++; epos++; } } while (level_hits); return E_OK; } /* Return number of items matched by parent */ int dir_count_parent (struct DIR_INFO *dinfo, int parent) { int i, num = 0; for (i=0; iitems; i++) { if (dinfo->item[i].parent == parent) { num++; } } return num; } /* Return item matched by parent */ int dir_match_parent (struct DIR_INFO *dinfo, int parent, int start_dir) { int i; for (i=start_dir; iitems; i++) { if (dinfo->item[i].parent == parent) { return i; } } return ERROR; } /* Return item matched by level == 0 */ int dir_match_null_level (struct DIR_INFO *dinfo, int start_dir) { int i; for (i=start_dir; iitems; i++) { if (!dinfo->item[i].level) { return i; } } return ERROR; } juke-0.7.orig/src/dir.h0000644000000000000000000000134510101601072014720 0ustar rootroot00000000000000#include struct DIR_BUILD { char *name; int size; }; struct DIR_ITEM { int queued; int type; /* 0 = directory */ int tree; int level; int parent; /* parent directory */ int offset; /* offset to strings */ int size; /* string size */ }; struct DIR_INFO { char *strings; int size; struct DIR_ITEM *item; int items; int files; int trees; }; char *dir_build_path (struct DIR_INFO *dinfo, int item); int dir_recurse (struct DIR_INFO *dinfo, struct CONFIG *cfg, char *path, int tree); int dir_count_parent (struct DIR_INFO *dinfo, int parent); int dir_match_parent (struct DIR_INFO *dinfo, int parent, int start_dir); int dir_match_null_level (struct DIR_INFO *dinfo, int start_dir); juke-0.7.orig/src/err.c0000644000000000000000000000014610101601072014723 0ustar rootroot00000000000000#include #include void err_exit (int err) { perror ("juke"); exit (err); } juke-0.7.orig/src/err.h0000644000000000000000000000052310101601072014727 0ustar rootroot00000000000000/* Atari nostalgia:) * * BIOS */ #define E_OK 0 #define ERROR -1 /* generic error */ #define E_SEEK -6 /* seek error */ #define E_WRITF -10 /* write fault */ #define E_READF -11 /* read fault */ /* GEMDOS */ #define EFILNF -33 /* file not found */ #define ENSMEM -39 /* out of memory */ void err_exit (int err); juke-0.7.orig/src/juke.c0000644000000000000000000000156610101601072015100 0ustar rootroot00000000000000#include #include #include "conf.h" #include "dir.h" #include "err.h" #include "mem.h" #include "queue.h" #include "tui.h" int main (int argc, char **argv) { int i, j, tree; struct CONFIG cfg = {0}; struct DIR_INFO dinfo = {0}; struct QUEUE queue = {0}; struct TUI tui = {0}; if (argc<2) { printf ("usage: juke [[directory]..]\n"); exit (ERROR); } config_load (&cfg); tree = 0; for (i=1;i #include "err.h" void mem_resize (void **mem, int size) { void *r; r = realloc (*mem, size); if (!r) err_exit (ENSMEM); *mem = r; } juke-0.7.orig/src/mem.h0000644000000000000000000000005010101601072014710 0ustar rootroot00000000000000void mem_resize (void **mem, int size); juke-0.7.orig/src/player.c0000644000000000000000000000443710101601072015436 0ustar rootroot00000000000000#ifdef HAVE_CONFIG_H #include "config.h" #endif /* HAVE_CONFIG_H */ #include #include #include #include #include #include #include #include "conf.h" #include "dir.h" #include "err.h" #include "player.h" #include "queue.h" /* Start playing item. * The exit functions should realy return error codes * but juke work that way that if a player returns an * error code. It's asumed to be because it failed to * open an audio device and the player is restarted. * We don't want that here. */ pid_t player_play (struct CONFIG *cfg, struct DIR_INFO *dinfo, int item) { int fd, i, args, format; char *path, *arg_list[CFG_ARGS], **s; pid_t pid; format = dinfo->item[item].type - 1; args = cfg->format[format].args; path = dir_build_path (dinfo, item); s = cfg->format[format].arg_list; for (i=0; ipid) { rpid = waitpid (p->pid, &status, WNOHANG | WUNTRACED); if (!rpid) return -1; if (rpid == p->pid) { if (WIFEXITED (status)) return (WEXITSTATUS (status)); else return 1; } } return 0; } /* Kill the player's process group and wait. */ void player_kill (struct PLAYER *p) { if (p->kill) { if (p->paused) kill (-p->kill, SIGCONT); kill (-p->kill, SIGTERM); waitpid (-p->kill, 0, 0); p->kill = 0; } } /* Send stop signal to the player's process group. */ void player_stop (struct PLAYER *p) { if (p->pid) kill (-p->pid, SIGSTOP); } /* Send continue signal to the player's process group. */ void player_cont (struct PLAYER *p) { if (p->pid) kill (-p->pid, SIGCONT); } juke-0.7.orig/src/player.h0000644000000000000000000000067310101601072015441 0ustar rootroot00000000000000#include struct PLAYER { int pid; int kill; int cmd; int paused; }; /* TUI player control */ #define PLAYER_NO_CMD 0 #define PLAYER_PAUSE 1 #define PLAYER_RELOAD 2 #define PLAYER_SKIP 3 pid_t player_play (struct CONFIG *cfg, struct DIR_INFO *dinfo, int item); int player_status (struct PLAYER *p); void player_kill (struct PLAYER *p); void player_stop (struct PLAYER *p); void player_cont (struct PLAYER *p); juke-0.7.orig/src/queue.c0000644000000000000000000001110610101601072015255 0ustar rootroot00000000000000#include #include #include #include "conf.h" #include "dir.h" #include "mem.h" #include "queue.h" /* Return item from position pos in queue or -1 on out of range */ int queue_get_item (struct QUEUE *q, int pos) { if (pos < q->items) { pos += q->pos; if (pos >= q->size) pos -= q->size; return q->base[pos]; } return -1; } /* Return position of item in queue or -1 for no match */ int queue_search_for_item (struct QUEUE *q, int item) { int i, j = q->pos; for (i=0;iitems;i++) { if (j == q->size) j -= q->size; if (q->base[j] == item) return i; j++; } return -1; } /* Prepend item to queue */ void queue_prepend (struct QUEUE *q, struct DIR_INFO *d, int item) { if (d->item[item].queued) return; else d->item[item].queued = 1; if (q->pos > 0) q->pos--; else q->pos = q->size - 1; q->base[q->pos] = item; q->items++; } /* Append item to queue */ void queue_append (struct QUEUE *q, struct DIR_INFO *d, int item) { int pos; if (d->item[item].queued) return; else d->item[item].queued = 1; pos = q->pos + q->items; if (pos >= q->size) pos -= q->size; q->base[pos] = item; q->items++; } /* Append every item under directory item to queue */ void queue_append_dir (struct QUEUE *q, struct DIR_INFO *d, int item) { int pos = 0, n = 0, ms, *list = 0, parent, child; ms = 100; mem_resize ((void **)&list, ms * sizeof(int)); list[n++] = item; do { parent = list[pos++]; child = -1; while ((child = dir_match_parent (d, parent, child + 1)) != -1) { if (d->item[child].type) { queue_append (q, d, child); } else { if (n == ms) { ms += 100; mem_resize ((void **)&list, ms * sizeof(int)); } list[n++] = child; } } } while (pos < n); free (list); } /* Delete top item from queue */ void queue_skip (struct QUEUE *q, struct DIR_INFO *d) { if (q->items) { d->item[q->base[q->pos]].queued = 0; q->items--; q->pos++; if (q->pos == q->size) q->pos = 0; } } /* Delete item from position pos from queue */ void queue_delete (struct QUEUE *q, struct DIR_INFO *d, int pos) { int move, pos2; if (pos < q->items) { move = q->items - pos - 1; pos += q->pos; pos2 = pos + 1; if (pos >= q->size) pos -= q->size; d->item[q->base[pos]].queued = 0; while (move) { if (pos >= q->size) pos -= q->size; if (pos2 >= q->size) pos2 -= q->size; q->base[pos++] = q->base[pos2++]; move--; } q->items--; } } /* Delete every item under directory item from queue */ void queue_delete_dir (struct QUEUE *q, struct DIR_INFO *d, int item) { int pos = 0, n = 0, ms, *list = 0, parent, child, ipos; ms = 100; mem_resize ((void **)&list, ms * sizeof(int)); list[n++] = item; do { parent = list[pos++]; child = -1; while ((child = dir_match_parent (d, parent, child + 1)) != -1) { if (d->item[child].type) { ipos = queue_search_for_item (q, child); if (ipos != -1) queue_delete (q, d, ipos); } else { if (n == ms) { ms += 100; mem_resize ((void **)&list, ms * sizeof(int)); } list[n++] = child; } } } while (pos < n); free (list); } /* Clear queue */ void queue_clear (struct QUEUE *q, struct DIR_INFO *d) { int i, item; for (i=0; iitems; i++) { item = queue_get_item (q, i); d->item[item].queued = 0; } q->pos = 0; q->items = 0; } /* Rotate integer val n steps */ static unsigned int ror (unsigned int val, int n) { int bits = sizeof(int) * 8; n %= bits; return ((val >> n) | (val << (bits - n))); } /* Shuffle items in queue */ void queue_shuffle (struct QUEUE *q, struct DIR_INFO *d) { int items = q->items, mod = items, count, *m = 0, *m2 = 0, rnd, item, i, j; mem_resize ((void **)&m, items * sizeof(int)); mem_resize ((void **)&m2, items * sizeof(int)); for (i=0; i rnd) { m[j] = -1; m2[i] = item; break; } } mod--; } queue_clear (q, d); for (i=0; ibase, d->files * sizeof (int)); srandom ((int)time (0)); q->size = d->files; } juke-0.7.orig/src/queue.h0000644000000000000000000000134010101601072015261 0ustar rootroot00000000000000struct QUEUE { int *base; int pos; int items; int size; }; int queue_get_item (struct QUEUE *q, int pos); int queue_search_for_item (struct QUEUE *q, int item); void queue_prepend (struct QUEUE *q, struct DIR_INFO *d, int item); void queue_append (struct QUEUE *q, struct DIR_INFO *d, int item); void queue_append_dir (struct QUEUE *q, struct DIR_INFO *d, int item); void queue_skip (struct QUEUE *q, struct DIR_INFO *d); void queue_delete (struct QUEUE *q, struct DIR_INFO *d, int pos); void queue_delete_dir (struct QUEUE *q, struct DIR_INFO *d, int pos); void queue_clear (struct QUEUE *q, struct DIR_INFO *d); void queue_shuffle (struct QUEUE *q, struct DIR_INFO *d); void queue_init (struct QUEUE *q, struct DIR_INFO *d); juke-0.7.orig/src/tui.c0000644000000000000000000004206110101601072014736 0ustar rootroot00000000000000#ifdef HAVE_CONFIG_H #include "config.h" #endif /* HAVE_CONFIG_H */ #include #include #include #include #include #include "conf.h" #include "dir.h" #include "err.h" #include "mem.h" #include "player.h" #include "queue.h" #include "tui.h" /* Call curses initialization routines. */ static void tui_setup_display (struct TUI *tui) { int status = 0; static struct TUI *my_tui; if (tui) my_tui = tui; initscr (); status |= halfdelay (3); status |= noecho (); status |= nonl (); status |= intrflush (stdscr, FALSE); keypad (stdscr, TRUE); curs_set (0); if (status == ERR) { endwin (); fprintf (stderr, "error: Could not setup wanted curses mode.\n"); exit (ERROR); } /* LINES & COLS are not updated after resize Linux, why? */ my_tui->lines = LINES; my_tui->cols = COLS; my_tui->redraw = 1; } /* static void tui_exit_by_signal (struct PLAYER *p) { struct PLAYER *my_p; if (p) { my_p = p; return; } my_p->kill = my_p->pid; player_kill (my_p); endwin (); exit (0); } */ static void tui_signal_handler (int signal) { if (signal == SIGWINCH) { endwin (); tui_setup_display (0); } /* if (signal == SIGINT) { tui_exit_by_signal (0); } */ } /* Ask for Yes or No */ static int tui_yes_no () { int r = 2; do { switch (getch ()) { case 'y': case 'Y': r = 1; break; case 'n': case 'N': r = 0; break; } } while (r == 2); return r; } /* Build index with items visible in the current directory. */ static void tui_update_list (struct TUI *tui) { int pos = 0, i, items; if (tui->view != -1) { items = dir_count_parent (tui->dinfo, tui->view); if (items) mem_resize ((void *)&tui->list, items * sizeof (int)); for (i=0; idinfo, tui->view, pos); tui->list[i] = pos; pos++; } } else { items = tui->dinfo->trees; mem_resize ((void *)&tui->list, items * sizeof (int)); pos = 0; for (i=0; idinfo, pos); tui->list[i] = pos; pos++; } } tui->disp[DM_ITEMS].items = items; } /* Search for key in item list */ static int tui_search_list (struct TUI *tui, int key) { int i; for (i=0; idisp[DM_ITEMS].items; i++) { if (tui->list[i] == key) return i; } return 0; } /* Print message on the status bar. */ static void tui_status_message (struct TUI *tui, char *message) { move (0,2); clrtoeol (); addnstr (message, tui->cols - 2); refresh (); } /* Redraw status bar */ static void tui_redraw_status (struct TUI *tui) { int strsize; char *str, buf[11]; move (0, 0); clrtoeol (); if (tui->player->paused) addch ('P'); move (0,2); switch (tui->dm) { case DM_ITEMS: addstr ("(items) "); if (tui->view != -1) { str = dir_build_path (tui->dinfo, tui->view); strsize = strlen (str); if (strsize <= tui->cols - 10) addnstr (str, strsize); else addch ('+'); free (str); } break; case DM_QUEUE: addstr ("(queue) "); buf[9] = 0; snprintf (buf, 11, "%d", tui->queue->items); if (!buf[9]) addstr (buf); else addch ('+'); } refresh (); } /* Redraw list */ static void tui_redraw_list (struct TUI *tui) { int line, pos, item, strsize; char *str; struct TUI_DISP *d = &tui->disp[tui->dm]; switch (tui->dm) { case DM_ITEMS: pos = d->base; for (line=2; linelines; line++) { move (line, 0); clrtoeol (); /* Screen is sometimes messed up if refresh() below is left out. * ncurses bug? */ refresh (); if (pos < d->items) { item = tui->list[pos]; if (tui->dinfo->item[item].queued) addch ('q'); if (!tui->dinfo->item[item].type) addch ('D'); strsize = tui->dinfo->item[item].size; if (strsize > (tui->cols - 2)) strsize = tui->cols - 2; str = tui->dinfo->strings; str += tui->dinfo->item[item].offset; mvaddnstr (line, 2, str, strsize); pos++; } } break; case DM_QUEUE: pos = d->base; for (line=2; linelines; line++) { move (line, 0); clrtoeol (); /* Screen is sometimes messed up if refresh() below is left out. * ncurses bug? */ refresh (); if (pos < d->items) { item = queue_get_item (tui->queue, pos); strsize = tui->dinfo->item[item].size; if (strsize > (tui->cols - 2)) strsize = tui->cols - 2; str = tui->dinfo->strings; str += tui->dinfo->item[item].offset; mvaddnstr (line, 2, str, strsize); pos++; } } } refresh (); } /* Update display variables to wanted cursor pos. */ static void tui_upd_y (struct TUI_DISP *td, struct TUI *tui, int offset, int redraw) { int lines = tui->lines - 2; td->cursor += offset; if (td->cursor < 0) td->cursor = 0; if (td->cursor >= td->items) td->cursor = td->items - 1; if (td->cursor < td->base) { td->base = td->cursor - (lines - 1); if (td->base < 0) td->base = 0; redraw = 1; } if (td->cursor >= (td->base + lines)) { td->base = td->cursor; if (td->base > (td->items - lines)) td->base = td->items - lines; redraw = 1; } if (redraw) tui_redraw_list (tui); } /* Move cursor and update screen as needed * mode is one of CURSOR_UP, CURSOR_DOWN, CURSOR_PG_UP, CURSOR_PG_DOWN * or CURSOR_REDRAW */ static void tui_move_cursor (struct TUI *tui, int mode) { int dot_mode = 0; struct TUI_DISP *d; d = &tui->disp[tui->dm]; switch (mode) { case CURSOR_UP: if (d->cursor > 0) { mvaddch (d->cursor - d->base + 2, 1, ' '); tui_upd_y (d, tui, -1, 0); mvaddch (d->cursor - d->base + 2, 1, '*'); refresh (); } break; case CURSOR_DOWN_ADD: dot_mode = 1; case CURSOR_DOWN_DELETE: if (!dot_mode) dot_mode = 2; case CURSOR_DOWN: if (dot_mode == 1) mvaddch (d->cursor - d->base + 2, 0, 'q'); if (dot_mode == 2) mvaddch (d->cursor - d->base + 2, 0, ' '); if (d->cursor < (d->items - 1)) { mvaddch (d->cursor - d->base + 2, 1, ' '); tui_upd_y (d, tui, 1, 0); mvaddch (d->cursor - d->base + 2, 1, '*'); refresh (); } break; case CURSOR_PG_UP: if (d->cursor > 0) { mvaddch (d->cursor - d->base + 2, 1, ' '); tui_upd_y (d, tui, -(tui->lines - 2), 0); mvaddch (d->cursor - d->base + 2, 1, '*'); refresh (); } break; case CURSOR_PG_DOWN: if (d->cursor < (d->items - 1)) { mvaddch (d->cursor - d->base + 2, 1, ' '); tui_upd_y (d, tui, tui->lines - 2, 0); mvaddch (d->cursor - d->base + 2, 1, '*'); refresh (); } break; case CURSOR_REDRAW: if (d->items) { if (d->cursor >= d->items) d->cursor = d->items - 1; tui_upd_y (d, tui, 0, 1); mvaddch (d->cursor - d->base + 2, 1, '*'); refresh (); } else { tui_redraw_list (tui); } } } /* Prints help message and waits for key press. */ static void tui_help_screen (struct TUI *tui) { static char help[] = {" (help)\n" "\n" "I a add tune\n" " b page up\n" " c clear queue\n" " d delete tune\n" " h help message\n" " i up\n" "I j left\n" " k down\n" "I l right\n" " m move to top\n" " p pause\n" " q quit\n" " r randomize\n" " s skip tune\n" " t toggle display\n" " sp page down\n" "\n" " "}; erase (); mvaddstr (0, 0, help); refresh (); while (getch () == -1) {} tui_redraw_status (tui); tui_move_cursor (tui, CURSOR_REDRAW); } /* Enter directory at cursor position and redraw screen */ static void tui_enter_dir (struct TUI *tui) { int item; struct DIR_ITEM *item_p; if ((tui->dm == DM_ITEMS) && tui->disp[DM_ITEMS].items) { item = tui->list[tui->disp[DM_ITEMS].cursor]; item_p = &tui->dinfo->item[item]; if (!item_p->type) { tui->view = item; tui_update_list (tui); tui->disp[DM_ITEMS].cursor = 0; tui_redraw_status (tui); tui_move_cursor (tui, CURSOR_REDRAW); } } } /* Leave directory and redraw screen */ static void tui_leave_dir (struct TUI *tui) { int old, cursor; struct DIR_ITEM *item_p = &tui->dinfo->item[tui->view]; if ((tui->dm == DM_ITEMS) && (tui->view != -1)) { old = tui->view; if (!item_p->level) tui->view = -1; else tui->view = tui->dinfo->item[tui->view].parent; tui_update_list (tui); cursor = tui_search_list (tui, old); tui->disp[DM_ITEMS].cursor = cursor; tui_redraw_status (tui); tui_move_cursor (tui, CURSOR_REDRAW); } } /* Add item at cursor position to queue. * Add dot to display as well. */ static void tui_add_to_queue (struct TUI *tui) { int item; if (tui->dm == DM_ITEMS) { item = tui->list[tui->disp[DM_ITEMS].cursor]; if (tui->dinfo->item[item].type) { if (!tui->dinfo->item[item].queued) { queue_append (tui->queue, tui->dinfo, item); tui->disp[DM_QUEUE].items = tui->queue->items; tui_move_cursor (tui, CURSOR_DOWN_ADD); } else { tui_move_cursor (tui, CURSOR_DOWN); } } else { queue_append_dir (tui->queue, tui->dinfo, item); tui->disp[DM_QUEUE].items = tui->queue->items; tui_move_cursor (tui, CURSOR_DOWN); } } } /* Delete item at cursor position to queue. * Delete dot from display as well. */ static void tui_delete_from_queue (struct TUI *tui) { int item, pos, playing_item; struct QUEUE *q = tui->queue; if (!tui->queue->items) return; switch (tui->dm) { case DM_ITEMS: item = tui->list[tui->disp[DM_ITEMS].cursor]; if (tui->dinfo->item[item].queued) { pos = queue_search_for_item (tui->queue, item); if (pos != -1) { if (!pos) { tui->player->cmd = PLAYER_SKIP; tui->disp[DM_ITEMS].cursor++; } else { queue_delete (tui->queue, tui->dinfo, pos); tui->disp[DM_QUEUE].items = tui->queue->items; tui_move_cursor (tui, CURSOR_DOWN_DELETE); } } } else { if (!tui->dinfo->item[item].type && q->items) { playing_item = q->base[q->pos]; queue_delete_dir (tui->queue, tui->dinfo, item); tui->disp[DM_QUEUE].items = tui->queue->items; if (!q->items) { tui->player->cmd = PLAYER_RELOAD; } else { if (playing_item != q->base[q->pos]) tui->player->cmd = PLAYER_RELOAD; } } tui_move_cursor (tui, CURSOR_DOWN); } break; case DM_QUEUE: if (!tui->disp[DM_QUEUE].cursor) { tui->player->cmd = PLAYER_SKIP; } else { queue_delete (tui->queue, tui->dinfo, tui->disp[DM_QUEUE].cursor); tui->disp[DM_QUEUE].items = tui->queue->items; tui_redraw_status (tui); tui_move_cursor (tui, CURSOR_REDRAW); } } } /* Clear queue */ static void tui_clear_queue (struct TUI *tui) { queue_clear (tui->queue, tui->dinfo); tui->disp[DM_QUEUE].items = tui->queue->items; tui->player->cmd = PLAYER_RELOAD; if (tui->dm == DM_QUEUE) tui_redraw_status (tui); tui_move_cursor (tui, CURSOR_REDRAW); } /* Move item at cursor position to position 0 in queue */ /* static void tui_move_item (struct TUI *tui) { int pos_x, item_x, item0; pos_x = tui->disp[tui->dm].cursor; item0 = tui->queue->base[tui->queue->pos]; if (tui->dm == DM_ITEMS) { item_x = tui->list[pos_x]; if (item_x == item0) return; if (!tui->dinfo->item[item_x].queued) return; pos_x = queue_search_for_item (tui->queue, item_x); } else { if (pos_x) item_x = queue_get_item (tui->queue, pos_x); else return; } queue_delete (tui->queue, tui->dinfo, pos_x); tui->dinfo->item[item0].queued = 0; tui->dinfo->item[item_x].queued = 1; tui->queue->base[tui->queue->pos] = item_x; tui->player->cmd = PLAYER_RELOAD; tui->disp[DM_QUEUE].items = tui->queue->items; if (tui->dm == DM_QUEUE) tui_redraw_status (tui); tui_move_cursor (tui, CURSOR_REDRAW); } */ static void tui_move_item (struct TUI *tui) { int del_item, del_pos, cursor; cursor = tui->disp[tui->dm].cursor; if (tui->dm == DM_ITEMS) { del_item = tui->list[cursor]; if (del_item == tui->queue->base[0]) return; del_pos = queue_search_for_item (tui->queue, del_item); if (del_pos == -1) return; } else { if (!cursor) return; del_pos = cursor; del_item = queue_get_item (tui->queue, del_pos); } queue_delete (tui->queue, tui->dinfo, del_pos); queue_prepend (tui->queue, tui->dinfo, del_item); tui->player->cmd = PLAYER_RELOAD; tui->disp[DM_QUEUE].items = tui->queue->items; tui_move_cursor (tui, CURSOR_REDRAW); } /* Randomize items in queue */ static void tui_randomize_queue (struct TUI *tui) { queue_shuffle (tui->queue, tui->dinfo); tui->player->cmd = PLAYER_RELOAD; if (tui->dm == DM_QUEUE) { tui_redraw_status (tui); tui_move_cursor (tui, CURSOR_REDRAW); } } /* Main player routine. * Note: case 1 ... 255. Player returned an error code, probably because * an audio device was busy. Restart. */ static void tui_player_control (struct TUI *tui) { int item; struct PLAYER *p = tui->player; switch (p->cmd) { case PLAYER_PAUSE: if (p->paused) { p->paused = 0; player_cont (p); } else { p->paused = 1; player_stop (p); } tui_redraw_status (tui); break; case PLAYER_RELOAD: if (p->pid) { p->kill = p->pid; p->pid = 0; } p->cmd = PLAYER_NO_CMD; return; case PLAYER_SKIP: if (tui->queue->items) { if (p->pid) { p->kill = p->pid; p->pid = 0; } queue_skip (tui->queue, tui->dinfo); tui->disp[DM_QUEUE].items = tui->queue->items; if (tui->dm == DM_QUEUE) tui_redraw_status (tui); tui_move_cursor (tui, CURSOR_REDRAW); p->cmd = PLAYER_NO_CMD; return; } } p->cmd = PLAYER_NO_CMD; if (p->kill) player_kill (p); if (!p->paused) { switch (player_status (p)) { case 0: if (tui->queue->items && p->pid) { queue_skip (tui->queue, tui->dinfo); tui->disp[DM_QUEUE].items = tui->queue->items; if (tui->dm == DM_QUEUE) tui_redraw_status (tui); tui_move_cursor (tui, CURSOR_REDRAW); if (!tui->queue->items) p->pid = 0; } case 1 ... 255: if (tui->queue->items) { item = queue_get_item (tui->queue, 0); p->pid = player_play (tui->cfg, tui->dinfo, item); } } } } static void tui_event_loop (struct TUI *tui) { int exit = 0, key = -1, resize; tui_update_list (tui); do { do { if (tui->lines < TUI_MIN_LINES || tui->cols < TUI_MIN_COLS) { resize = 1; } else { resize = 0; if (tui->redraw) { tui_redraw_status (tui); tui_move_cursor (tui, CURSOR_REDRAW); tui->redraw = 0; } } tui_player_control (tui); key = getch (); } while (key == -1 || resize); switch (key) { case KEY_NPAGE: case ' ': tui_move_cursor (tui, CURSOR_PG_DOWN); break; case 'a': case 'A': tui_add_to_queue (tui); break; case KEY_PPAGE: case 'b': case 'B': tui_move_cursor (tui, CURSOR_PG_UP); break; case 'c': case 'C': tui_clear_queue (tui); break; case 'd': case 'D': tui_delete_from_queue (tui); break; case 'h': case 'H': tui_help_screen (tui); break; case KEY_UP: case 'i': case 'I': tui_move_cursor (tui, CURSOR_UP); break; case KEY_LEFT: case 'j': case 'J': tui_leave_dir (tui); break; case KEY_DOWN: case 'k': case 'K': tui_move_cursor (tui, CURSOR_DOWN); break; case KEY_RIGHT: case 'l': case 'L': tui_enter_dir (tui); break; case 'm': case 'M': tui_move_item (tui); break; case 'p': case 'P': tui->player->cmd = PLAYER_PAUSE; break; case 'q': case 'Q': tui_status_message (tui, "Quit? (y/n)"); exit = tui_yes_no (); if (!exit) { tui_redraw_status (tui); } else { tui->player->kill = tui->player->pid; player_kill (tui->player); } break; case 'r': case 'R': tui_randomize_queue (tui); break; case 's': case 'S': tui->player->cmd = PLAYER_SKIP; break; case 't': case 'T': tui->dm ^= 1; tui_redraw_status (tui); tui_move_cursor (tui, CURSOR_REDRAW); } } while (!exit); } void tui_start (struct TUI *tui) { struct sigaction sa, old_sa; struct PLAYER player = {0}; tui_setup_display (tui); tui->view = -1; tui->player = &player; /* tui_exit_by_signal (tui->player); */ sa.sa_handler = tui_signal_handler; if (sigemptyset (&sa.sa_mask) == -1) { endwin (); err_exit (ERROR); } sa.sa_flags = SA_RESTART; if (sigaction (SIGWINCH, &sa, &old_sa) == -1) { endwin (); err_exit (ERROR); } /* if (sigaction (SIGINT, &sa, &old_sa) == -1) { endwin (); err_exit (ERROR); } */ tui_event_loop (tui); endwin (); } juke-0.7.orig/src/tui.h0000644000000000000000000000166510101601072014750 0ustar rootroot00000000000000/* Minimum terminal size */ #define TUI_MIN_LINES 10 /* help screen is 20 high but 10 displays ok.*/ #define TUI_MIN_COLS 20 /* help screen is 20 wide */ /* Display modes */ #define DM_ITEMS 0 #define DM_QUEUE 1 /* Cursor movement */ #define CURSOR_UP 0 #define CURSOR_DOWN_ADD 1 #define CURSOR_DOWN_DELETE 2 #define CURSOR_DOWN 3 #define CURSOR_PG_UP 4 #define CURSOR_PG_DOWN 5 #define CURSOR_REDRAW 6 struct TUI_DISP { int items; int base; int cursor; }; /* It's messy to have disp[DM_QUEUE].items _and_ queue.items * Fix some day. */ struct TUI { int dm; int redraw; int lines; int cols; int view; /* -1 for tree view */ int *list; struct TUI_DISP disp[2]; /* td[0] is item list, td[1] is queue list */ struct CONFIG *cfg; struct DIR_INFO *dinfo; struct QUEUE *queue; struct PLAYER *player; }; void tui_start (struct TUI *tui); juke-0.7.orig/src/FILES0000644000000000000000000000031610101601072014553 0ustar rootroot00000000000000conf.c Configuration (juke.conf) dir.c Directory scanning err.c Error handling juke.c Main mem.c Memory handling player.c Execution of players etc queue.c Queueing of tunes tui.c Text user interface juke-0.7.orig/doc/0000755000000000000000000000000010101601072013744 5ustar rootroot00000000000000juke-0.7.orig/doc/Makefile.in0000644000000000000000000001267410101601072016023 0ustar rootroot00000000000000# Makefile.in generated automatically by automake 1.4 from Makefile.am # Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include DESTDIR = pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ CC = @CC@ MAKEINFO = @MAKEINFO@ PACKAGE = @PACKAGE@ VERSION = @VERSION@ man_MANS = juke.1 EXTRA_DIST = $(man_MANS) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = ../config.h CONFIG_CLEAN_FILES = man1dir = $(mandir)/man1 MANS = $(man_MANS) NROFF = nroff DIST_COMMON = Makefile.am Makefile.in DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) TAR = tar GZIP_ENV = --best all: all-redirect .SUFFIXES: $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && $(AUTOMAKE) --foreign --include-deps doc/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status install-man1: $(mkinstalldirs) $(DESTDIR)$(man1dir) @list='$(man1_MANS)'; \ l2='$(man_MANS)'; for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \ $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \ done uninstall-man1: @list='$(man1_MANS)'; \ l2='$(man_MANS)'; for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \ rm -f $(DESTDIR)$(man1dir)/$$inst; \ done install-man: $(MANS) @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-man1 uninstall-man: @$(NORMAL_UNINSTALL) $(MAKE) $(AM_MAKEFLAGS) uninstall-man1 tags: TAGS TAGS: distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) subdir = doc distdir: $(DISTFILES) @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done info-am: info: info-am dvi-am: dvi: dvi-am check-am: all-am check: check-am installcheck-am: installcheck: installcheck-am install-exec-am: install-exec: install-exec-am install-data-am: install-man install-data: install-data-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-am uninstall-am: uninstall-man uninstall: uninstall-am all-am: Makefile $(MANS) all-redirect: all-am install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: $(mkinstalldirs) $(DESTDIR)$(mandir)/man1 mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: mostlyclean-am: mostlyclean-generic mostlyclean: mostlyclean-am clean-am: clean-generic mostlyclean-am clean: clean-am distclean-am: distclean-generic clean-am distclean: distclean-am maintainer-clean-am: maintainer-clean-generic distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am .PHONY: install-man1 uninstall-man1 install-man uninstall-man tags \ distdir info-am info dvi-am dvi check check-am installcheck-am \ installcheck install-exec-am install-exec install-data-am install-data \ install-am install uninstall-am uninstall all-redirect all-am all \ installdirs mostlyclean-generic distclean-generic clean-generic \ maintainer-clean-generic clean mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: juke-0.7.orig/doc/Makefile.am0000644000000000000000000000005310101601072015776 0ustar rootroot00000000000000man_MANS = juke.1 EXTRA_DIST = $(man_MANS) juke-0.7.orig/doc/juke.10000644000000000000000000000266210101601072014772 0ustar rootroot00000000000000.\" Hey, EMACS: -*- nroff -*- .\" First parameter, NAME, should be all caps .\" Second parameter, SECTION, should be 1-8, maybe w/ subsection .\" other parameters are allowed: see man(7), man(1) .TH JUKE 1 "March 6, 2000" .\" Please adjust this date whenever revising the manpage. .\" .\" Some roff macros, for reference: .\" .nh disable hyphenation .\" .hy enable hyphenation .\" .ad l left justify .\" .ad b justify to both left and right margins .\" .nf disable filling .\" .fi enable filling .\" .br insert line break .\" .sp insert n+1 empty lines .\" for manpage-specific macros, see man(7) .SH NAME juke \- A full screen jukebox .SH SYNOPSIS .B juke .RI .I [directory]... .br .SH DESCRIPTION This manual page documents briefly the .B juke program. .PP .\" TeX users may be more comfortable with the \fB\fP and .\" \fI\fP escape sequences to invode bold face and italics, .\" respectively. \fBJuke\fP is a program that take directories as its arguments and will give the user the possibily of choosing audio files and queue them for playback. Juke will play mp3, mod, wav and other formats. .SH FILES /etc/juke.conf, ~/.juke.conf .SH SEE ALSO .BR mpg123 (1), .BR play (1), .BR xmp (1). .br .SH AUTHOR This manual page was written by Eric Leblanc , for the Debian GNU/Linux system (but may be used by others).