kasumi-2.5/0000777000175000017500000000000011231307557007662 500000000000000kasumi-2.5/INSTALL0000644000175000017500000000147010345200474010624 00000000000000Installing Kasumi ***************** Build Requirements ================== To build a complete kasumi from sources, you need: * The GIMP Toolkit (Gtk+) 2.4.0 or later. * The GNU C++ compiler (g++) * A `make' program. GNU make is recommended. Execution Requirements ====================== To run Kasumi, you need: * Japanese convertion engine, Anthy 6131 or later Basic Installation ================== Basically, to compile and install from sources, you have to enter three commands following: $ ./configure $ make # make install Package Installation ================= Some Linux and *BSD distributors and contributors provide useful packages for their environment such as rpm, dpkg, ports and portage. We, however, don't care about them. Please contact distributors who provide the environment you use. kasumi-2.5/KasumiDic.hxx0000644000175000017500000000455310711644443012207 00000000000000/********************************************************************* * * KasumiDic.hxx * * Kasumi - a management tool for a private dictionary of anthy * * Copyright (C) 2004-2006 Takashi Nakamoto * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. * *********************************************************************/ #ifndef __KASUMI_DIC_HXX__ #define __KASUMI_DIC_HXX__ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include #include #include "KasumiWord.hxx" #include "KasumiException.hxx" #include "KasumiDicEventListener.hxx" #include "KasumiWordEventListener.hxx" #include "KasumiConfiguration.hxx" #define ERROR 0 #define VALID 1 using namespace std; class KasumiDic : public KasumiWordEventListener{ private: list mWordList; vector EventListeners; void load(KasumiConfiguration *conf) throw (KasumiException); public: KasumiDic(KasumiConfiguration *conf) throw(KasumiException); ~KasumiDic(); void store() throw(KasumiException); void appendWord(KasumiWord *word); // returns this word's ID void removeWord(unsigned int id); void registerEventListener(KasumiDicEventListener *listener); void removeEventListener(KasumiDicEventListener *listener); list::iterator firstWordIter(){ return mWordList.begin(); }; list::iterator endWordIter(){ return mWordList.end(); }; void changedFrequency(KasumiWord *word); void changedSpelling(KasumiWord *word); void changedSound(KasumiWord *word); void changedWordType(KasumiWord *word); // KasumiWord *getWordWithID(unsigned int id) throw(KasumiException); // int getUpperBoundOfWordID(); }; #endif kasumi-2.5/kasumi.10000644000175000017500000000314411220634547011153 00000000000000.\"Generated by db2man.xsl. Don't modify this, modify the source. .de Sh \" Subsection .br .if t .Sp .ne 5 .PP \fB\\$1\fR .PP .. .de Sp \" Vertical space (when we can't use .PP) .if t .sp .5v .if n .sp .. .de Ip \" List item .br .ie \\n(.$>=3 .ne \\$3 .el .ne 3 .IP "\\$1" \\$2 .. .TH "KASUMI" 1 "May 2006" "" "" .SH NAME kasumi \- a personal dictionary manager for Anthy .SH "SYNOPSIS" .ad l .hy 0 .HP 7 \fBkasumi\fR [\fIoptions\fR] .ad .hy .SH "DESCRIPTION" .PP \fBkasumi\fR is a personal dictionary manager for Anthy\&. .SH "OPTIONS" .TP \fB\-h\fR \fB\-\-help\fR Show summary of options .TP \fB\-v\fR \fB\-\-version\fR Show Kasumi's version and copyright information .TP \fB\-m\fR \fB\-\-manage\fR Run Kasumi in Manage mode\&. You may abbreviate this option .TP \fB\-a\fR \fB\-\-add\fR Run Kasumi in Add mode\&. .TP \fB\-\-sound val\fR Set default sound entry (only in Add mode) .TP \fB\-\-spelling val\fR Set default spelling entry (only in Add mode) .TP \fB\-\-wordclass val\fR Set default word class entry (only in Add mode) .TP \fB\-i\fR \fB\-\-import\fR Import selected text as a spelling .TP \fB\-I\fR \fB\-\-ignore\fR Ignore selected text .SH "AUTHOR" .PP This manual page was written by Ikuya Awashiro for the Debian™ system (but may be used by others)\&. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation\&. .PP On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common\-licenses/GPL\&. kasumi-2.5/KasumiWord.hxx0000644000175000017500000000623111135274256012420 00000000000000/********************************************************************* * * KasumiWord.hxx * * Kasumi - a management tool for a private dictionary of anthy * * Copyright (C) 2004-2006 Takashi Nakamoto * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. * *********************************************************************/ #ifndef __KASUMI_WORD_HXX__ #define __KASUMI_WORD_HXX__ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include #include "KasumiException.hxx" #include "KasumiConfiguration.hxx" #include "KasumiWordType.hxx" #include "KasumiWordEventListener.hxx" #include #include using namespace std; class KasumiWord{ private: bool IsEUCJP; string Sound; // corresponding "Yomi" in private-dic.src string Sound_UTF8; int Frequency; // corresponding "Hindo" string Spelling; // corresponding "Tango" string Spelling_UTF8; unsigned int id; vector EventListeners; KasumiWordType *mWordType; static iconv_t IconvUTF8_To_EUCJP; static iconv_t IconvEUCJP_To_UTF8; // confirms if the given sound consists of only Hiragana // if no invalid character, returns empty string static string extractInvalidCharacterFromSound(string soundByUTF8); static unsigned int id_generator; static vector words; KasumiWord(KasumiConfiguration *conf); public: static KasumiWord* createNewWord(KasumiConfiguration *conf); // property functions void setSound(const string &aSound) throw(KasumiException); void setSoundByUTF8(const string &aSound) throw(KasumiException); string getSound(){ return Sound; }; string getSoundByUTF8(){ return Sound_UTF8; }; void setFrequency(int aFrequency); int getFrequency(){ return Frequency; }; void setSpelling(const string &aSpelling); void setSpellingByUTF8(const string &aSpelling); string getSpelling(){ return Spelling; }; string getSpellingByUTF8(){ return Spelling_UTF8; }; void setWordType(KasumiWordType *aType); KasumiWordType *getWordType() { return mWordType; }; string getWordTypeUIString(); // UTF8 unsigned int getID(){ return id; }; void registerEventListener(KasumiWordEventListener *listener); void removeEventListener(KasumiWordEventListener *listener); static KasumiWord *getWordFromID(unsigned int id); static string convertUTF8ToEUCJP(const string &aEUCJP); static string convertEUCJPToUTF8(const string &aUTF8); }; #endif kasumi-2.5/install-sh0000755000175000017500000001273610142036015011577 00000000000000#!/bin/sh # # install - install a program, script, or datafile # This comes from X11R5 (mit/util/scripts/install.sh). # # Copyright 1991 by the Massachusetts Institute of Technology # # Permission to use, copy, modify, distribute, and sell this software and its # documentation for any purpose is hereby granted without fee, provided that # the above copyright notice appear in all copies and that both that # copyright notice and this permission notice appear in supporting # documentation, and that the name of M.I.T. not be used in advertising or # publicity pertaining to distribution of the software without specific, # written prior permission. M.I.T. makes no representations about the # suitability of this software for any purpose. It is provided "as is" # without express or implied warranty. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" chmodprog="${CHMODPROG-chmod}" chownprog="${CHOWNPROG-chown}" chgrpprog="${CHGRPPROG-chgrp}" stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" transformbasename="" transform_arg="" instcmd="$mvprog" chmodcmd="$chmodprog 0755" chowncmd="" chgrpcmd="" stripcmd="" rmcmd="$rmprog -f" mvcmd="$mvprog" src="" dst="" dir_arg="" while [ x"$1" != x ]; do case $1 in -c) instcmd="$cpprog" shift continue;; -d) dir_arg=true shift continue;; -m) chmodcmd="$chmodprog $2" shift shift continue;; -o) chowncmd="$chownprog $2" shift shift continue;; -g) chgrpcmd="$chgrpprog $2" shift shift continue;; -s) stripcmd="$stripprog" shift continue;; -t=*) transformarg=`echo $1 | sed 's/-t=//'` shift continue;; -b=*) transformbasename=`echo $1 | sed 's/-b=//'` shift continue;; *) if [ x"$src" = x ] then src=$1 else # this colon is to work around a 386BSD /bin/sh bug : dst=$1 fi shift continue;; esac done if [ x"$src" = x ] then echo "install: no input file specified" exit 1 else true fi if [ x"$dir_arg" != x ]; then dst=$src src="" if [ -d $dst ]; then instcmd=: chmodcmd="" else instcmd=mkdir fi else # Waiting for this to be detected by the "$instcmd $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if [ -f $src -o -d $src ] then true else echo "install: $src does not exist" exit 1 fi if [ x"$dst" = x ] then echo "install: no destination specified" exit 1 else true fi # If destination is a directory, append the input filename; if your system # does not like double slashes in filenames, you may need to add some logic if [ -d $dst ] then dst="$dst"/`basename $src` else true fi fi ## this sed command emulates the dirname command dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Make sure that the destination directory exists. # this part is taken from Noah Friedman's mkinstalldirs script # Skip lots of stat calls in the usual case. if [ ! -d "$dstdir" ]; then defaultIFS=' ' IFS="${IFS-${defaultIFS}}" oIFS="${IFS}" # Some sh's can't handle IFS=/ for some reason. IFS='%' set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` IFS="${oIFS}" pathcomp='' while [ $# -ne 0 ] ; do pathcomp="${pathcomp}${1}" shift if [ ! -d "${pathcomp}" ] ; then $mkdirprog "${pathcomp}" else true fi pathcomp="${pathcomp}/" done fi if [ x"$dir_arg" != x ] then $doit $instcmd $dst && if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi else # If we're going to rename the final executable, determine the name now. if [ x"$transformarg" = x ] then dstfile=`basename $dst` else dstfile=`basename $dst $transformbasename | sed $transformarg`$transformbasename fi # don't allow the sed command to completely eliminate the filename if [ x"$dstfile" = x ] then dstfile=`basename $dst` else true fi # Make a temp file name in the proper directory. dsttmp=$dstdir/#inst.$$# # Move or copy the file name to the temp name $doit $instcmd $src $dsttmp && trap "rm -f ${dsttmp}" 0 && # and set any options; do chmod last to preserve setuid bits # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $instcmd $src $dsttmp" command. if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && # Now rename the file to the real destination. $doit $rmcmd -f $dstdir/$dstfile && $doit $mvcmd $dsttmp $dstdir/$dstfile fi && exit 0 kasumi-2.5/intl.h0000644000175000017500000000111710142036015010701 00000000000000#ifndef __INTL_H__ #define __INTL_H__ #ifdef ENABLE_NLS # include # define _(String) dgettext(PACKAGE,String) # ifdef gettext_noop # define N_(String) gettext_noop(String) # else # define N_(String) (String) # endif /* gettext_noop */ #else # define _(String) (String) # define N_(String) (String) # define textdomain(String) (String) # define gettext(String) (String) # define dgettext(Domain,String) (String) # define dcgettext(Domain,String,Type) (String) # define bindtextdomain(Domain,Directory) (Domain) #endif /* ENABLE_NLS */ #endif /* __INTL_H__ */ kasumi-2.5/NEWS0000644000175000017500000000022510345200474010267 00000000000000If you want to know about the latest version or other information, please visit the following: http://kasumi.sourceforge.jp/ (Note: Japanese only) kasumi-2.5/mkinstalldirs0000755000175000017500000000370410142036015012374 00000000000000#! /bin/sh # mkinstalldirs --- make directory hierarchy # Author: Noah Friedman # Created: 1993-05-16 # Public domain errstatus=0 dirmode="" usage="\ Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..." # process command line arguments while test $# -gt 0 ; do case $1 in -h | --help | --h*) # -h for help echo "$usage" 1>&2 exit 0 ;; -m) # -m PERM arg shift test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } dirmode=$1 shift ;; --) # stop option processing shift break ;; -*) # unknown option echo "$usage" 1>&2 exit 1 ;; *) # first non-opt arg break ;; esac done for file do if test -d "$file"; then shift else break fi done case $# in 0) exit 0 ;; esac case $dirmode in '') if mkdir -p -- . 2>/dev/null; then echo "mkdir -p -- $*" exec mkdir -p -- "$@" fi ;; *) if mkdir -m "$dirmode" -p -- . 2>/dev/null; then echo "mkdir -m $dirmode -p -- $*" exec mkdir -m "$dirmode" -p -- "$@" fi ;; esac for file do set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` shift pathcomp= for d do pathcomp="$pathcomp$d" case $pathcomp in -*) pathcomp=./$pathcomp ;; esac if test ! -d "$pathcomp"; then echo "mkdir $pathcomp" mkdir "$pathcomp" || lasterr=$? if test ! -d "$pathcomp"; then errstatus=$lasterr else if test ! -z "$dirmode"; then echo "chmod $dirmode $pathcomp" lasterr="" chmod "$dirmode" "$pathcomp" || lasterr=$? if test ! -z "$lasterr"; then errstatus=$lasterr fi fi fi fi pathcomp="$pathcomp/" done done exit $errstatus # Local Variables: # mode: shell-script # sh-indentation: 2 # End: # mkinstalldirs ends here kasumi-2.5/po/0000777000175000017500000000000011231307560010272 500000000000000kasumi-2.5/po/boldquot.sed0000644000175000017500000000033110142036016012524 00000000000000s/"\([^"]*\)"/“\1”/g s/`\([^`']*\)'/‘\1’/g s/ '\([^`']*\)' / ‘\1’ /g s/ '\([^`']*\)'$/ ‘\1’/g s/^'\([^`']*\)' /‘\1’ /g s/“”/""/g s/“/“/g s/”/”/g s/‘/‘/g s/’/’/g kasumi-2.5/po/stamp-po0000644000175000017500000000001211231304002011646 00000000000000timestamp kasumi-2.5/po/Makefile.in.in0000644000175000017500000002744110142036016012663 00000000000000# Makefile for PO directory in any package using GNU gettext. # Copyright (C) 1995-1997, 2000-2003 by Ulrich Drepper # # This file can be copied and used freely without restrictions. It can # be used in projects which are not available under the GNU General Public # License but which still want to provide support for the GNU gettext # functionality. # Please note that the actual code of GNU gettext is covered by the GNU # General Public License and is *not* in the public domain. PACKAGE = @PACKAGE@ VERSION = @VERSION@ SHELL = /bin/sh @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ datadir = @datadir@ localedir = $(datadir)/locale gettextsrcdir = $(datadir)/gettext/po INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ MKINSTALLDIRS = @MKINSTALLDIRS@ mkinstalldirs = $(SHELL) $(MKINSTALLDIRS) GMSGFMT = @GMSGFMT@ MSGFMT = @MSGFMT@ XGETTEXT = @XGETTEXT@ MSGMERGE = msgmerge MSGMERGE_UPDATE = @MSGMERGE@ --update MSGINIT = msginit MSGCONV = msgconv MSGFILTER = msgfilter POFILES = @POFILES@ GMOFILES = @GMOFILES@ UPDATEPOFILES = @UPDATEPOFILES@ DUMMYPOFILES = @DUMMYPOFILES@ DISTFILES.common = Makefile.in.in remove-potcdate.sin \ $(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) DISTFILES = $(DISTFILES.common) Makevars POTFILES.in $(DOMAIN).pot stamp-po \ $(POFILES) $(GMOFILES) \ $(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) POTFILES = \ CATALOGS = @CATALOGS@ # Makevars gets inserted here. (Don't remove this line!) .SUFFIXES: .SUFFIXES: .po .gmo .mo .sed .sin .nop .po-update .po.mo: @echo "$(MSGFMT) -c -o $@ $<"; \ $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@ .po.gmo: @lang=`echo $* | sed -e 's,.*/,,'`; \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \ cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo .sin.sed: sed -e '/^#/d' $< > t-$@ mv t-$@ $@ all: all-@USE_NLS@ all-yes: stamp-po all-no: # stamp-po is a timestamp denoting the last time at which the CATALOGS have # been loosely updated. Its purpose is that when a developer or translator # checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS, # "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent # invocations of "make" will do nothing. This timestamp would not be necessary # if updating the $(CATALOGS) would always touch them; however, the rule for # $(POFILES) has been designed to not touch files that don't need to be # changed. stamp-po: $(srcdir)/$(DOMAIN).pot test -z "$(CATALOGS)" || $(MAKE) $(CATALOGS) @echo "touch stamp-po" @echo timestamp > stamp-poT @mv stamp-poT stamp-po # Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', # otherwise packages like GCC can not be built if only parts of the source # have been downloaded. # This target rebuilds $(DOMAIN).pot; it is an expensive operation. # Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. $(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \ --files-from=$(srcdir)/POTFILES.in \ --copyright-holder='$(COPYRIGHT_HOLDER)' \ --msgid-bugs-address='$(MSGID_BUGS_ADDRESS)' test ! -f $(DOMAIN).po || { \ if test -f $(srcdir)/$(DOMAIN).pot; then \ sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ else \ rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ fi; \ else \ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ fi; \ } # This rule has no dependencies: we don't need to update $(DOMAIN).pot at # every "make" invocation, only create it when it is missing. # Only "make $(DOMAIN).pot-update" or "make dist" will force an update. $(srcdir)/$(DOMAIN).pot: $(MAKE) $(DOMAIN).pot-update # This target rebuilds a PO file if $(DOMAIN).pot has changed. # Note that a PO file is not touched if it doesn't need to be changed. $(POFILES): $(srcdir)/$(DOMAIN).pot @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \ cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot install: install-exec install-data install-exec: install-data: install-data-@USE_NLS@ if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \ for file in $(DISTFILES.common) Makevars.template; do \ $(INSTALL_DATA) $(srcdir)/$$file \ $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ for file in Makevars; do \ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ else \ : ; \ fi install-data-no: all install-data-yes: all $(mkinstalldirs) $(DESTDIR)$(datadir) @catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \ cat=`basename $$cat`; \ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ dir=$(localedir)/$$lang/LC_MESSAGES; \ $(mkinstalldirs) $(DESTDIR)$$dir; \ if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ if test -n "$$lc"; then \ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ for file in *; do \ if test -f $$file; then \ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ fi; \ done); \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ else \ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ :; \ else \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ fi; \ fi; \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ fi; \ done; \ done install-strip: install installdirs: installdirs-exec installdirs-data installdirs-exec: installdirs-data: installdirs-data-@USE_NLS@ if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \ else \ : ; \ fi installdirs-data-no: installdirs-data-yes: $(mkinstalldirs) $(DESTDIR)$(datadir) @catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \ cat=`basename $$cat`; \ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ dir=$(localedir)/$$lang/LC_MESSAGES; \ $(mkinstalldirs) $(DESTDIR)$$dir; \ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ if test -n "$$lc"; then \ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ for file in *; do \ if test -f $$file; then \ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ fi; \ done); \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ else \ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ :; \ else \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ fi; \ fi; \ fi; \ done; \ done # Define this as empty until I found a useful application. installcheck: uninstall: uninstall-exec uninstall-data uninstall-exec: uninstall-data: uninstall-data-@USE_NLS@ if test "$(PACKAGE)" = "gettext-tools"; then \ for file in $(DISTFILES.common) Makevars.template; do \ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ else \ : ; \ fi uninstall-data-no: uninstall-data-yes: catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \ cat=`basename $$cat`; \ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ done; \ done check: all info dvi ps pdf html tags TAGS ctags CTAGS ID: mostlyclean: rm -f remove-potcdate.sed rm -f stamp-poT rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po rm -fr *.o clean: mostlyclean distclean: clean rm -f Makefile Makefile.in POTFILES *.mo maintainer-clean: distclean @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." rm -f stamp-po $(GMOFILES) distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) dist distdir: $(MAKE) update-po @$(MAKE) dist2 # This is a separate target because 'update-po' must be executed before. dist2: $(DISTFILES) dists="$(DISTFILES)"; \ if test "$(PACKAGE)" = "gettext-tools"; then \ dists="$$dists Makevars.template"; \ fi; \ if test -f $(srcdir)/ChangeLog; then \ dists="$$dists ChangeLog"; \ fi; \ for i in 0 1 2 3 4 5 6 7 8 9; do \ if test -f $(srcdir)/ChangeLog.$$i; then \ dists="$$dists ChangeLog.$$i"; \ fi; \ done; \ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ for file in $$dists; do \ if test -f $$file; then \ cp -p $$file $(distdir); \ else \ cp -p $(srcdir)/$$file $(distdir); \ fi; \ done update-po: Makefile $(MAKE) $(DOMAIN).pot-update test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) $(MAKE) update-gmo # General rule for updating PO files. .nop.po-update: @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \ tmpdir=`pwd`; \ echo "$$lang:"; \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ cd $(srcdir); \ if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ rm -f $$tmpdir/$$lang.new.po; \ else \ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ :; \ else \ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ exit 1; \ fi; \ fi; \ else \ echo "msgmerge for $$lang.po failed!" 1>&2; \ rm -f $$tmpdir/$$lang.new.po; \ fi $(DUMMYPOFILES): update-gmo: Makefile $(GMOFILES) @: Makefile: Makefile.in.in $(top_builddir)/config.status @POMAKEFILEDEPS@ cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \ $(SHELL) ./config.status force: # Tell versions [3.59,3.63) of GNU make not to export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: kasumi-2.5/po/en@quot.header0000644000175000017500000000226310142036016012771 00000000000000# All this catalog "translates" are quotation characters. # The msgids must be ASCII and therefore cannot contain real quotation # characters, only substitutes like grave accent (0x60), apostrophe (0x27) # and double quote (0x22). These substitutes look strange; see # http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html # # This catalog translates grave accent (0x60) and apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019). # It also translates pairs of apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019) # and pairs of quotation mark (0x22) to # left double quotation mark (U+201C) and right double quotation mark (U+201D). # # When output to an UTF-8 terminal, the quotation characters appear perfectly. # When output to an ISO-8859-1 terminal, the single quotation marks are # transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to # grave/acute accent (by libiconv), and the double quotation marks are # transliterated to 0x22. # When output to an ASCII terminal, the single quotation marks are # transliterated to apostrophes, and the double quotation marks are # transliterated to 0x22. # kasumi-2.5/po/remove-potcdate.sin0000644000175000017500000000066010142036016014014 00000000000000# Sed script that remove the POT-Creation-Date line in the header entry # from a POT file. # # The distinction between the first and the following occurrences of the # pattern is achieved by looking at the hold space. /^"POT-Creation-Date: .*"$/{ x # Test if the hold space is empty. s/P/P/ ta # Yes it was empty. First occurrence. Remove the line. g d bb :a # The hold space was nonempty. Following occurrences. Do nothing. x :b } kasumi-2.5/po/kasumi.pot0000644000175000017500000001210411231304001012204 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-07-21 18:18+0900\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8bit\n" #: KasumiWord.cxx:191 KasumiWord.cxx:214 msgid "" "Sound must consist of only Hiragana characters. You have entered invalid " "character: " msgstr "" #: KasumiMainWindow.cxx:81 msgid "Kasumi" msgstr "" #: KasumiMainWindow.cxx:106 msgid "Search:" msgstr "" #: KasumiMainWindow.cxx:118 msgid "Search by Spelling" msgstr "" #: KasumiMainWindow.cxx:124 msgid "Search by Sound" msgstr "" #: KasumiMainWindow.cxx:180 KasumiAddWindow.cxx:71 msgid "Spelling" msgstr "" #: KasumiMainWindow.cxx:196 KasumiAddWindow.cxx:88 msgid "Sound" msgstr "" #: KasumiMainWindow.cxx:222 KasumiAddWindow.cxx:105 msgid "Frequency" msgstr "" #: KasumiMainWindow.cxx:257 msgid "WordClass" msgstr "" #: KasumiMainWindow.cxx:375 msgid "" "Your dictionary was changed. Do you save these changes before Kasumi quits?" msgstr "" #: KasumiAddWindow.cxx:58 msgid "Kasumi (Register words)" msgstr "" #: KasumiAddWindow.cxx:127 msgid "Word Type" msgstr "" #: KasumiAddWindow.cxx:176 msgid "Subcategory of Word Type" msgstr "" #: KasumiAddWindow.cxx:209 msgid "Add entered word and quit registration." msgstr "" #: KasumiAddWindow.cxx:210 msgid "" "If all the necessary items are filled in, add entered word and quit " "registration." msgstr "" #: KasumiAddWindow.cxx:217 KasumiAddWindow.cxx:218 msgid "Cancel registration and quit." msgstr "" #: KasumiAddWindow.cxx:231 msgid "Add entered word" msgstr "" #: KasumiAddWindow.cxx:232 msgid "If all the necessary items are filled in, add entered word." msgstr "" #: KasumiAddWindow.cxx:239 msgid "Manage mode" msgstr "" #: KasumiAddWindow.cxx:240 msgid "Make the shift to manage mode to modify and remove registered words." msgstr "" #: KasumiAddWindow.cxx:247 msgid "Quit this application" msgstr "" #: KasumiAddWindow.cxx:248 msgid "Save dictionary and quit this application." msgstr "" #: KasumiAddWindow.cxx:299 msgid "Invalid entry for Sound." msgstr "" #: KasumiAddWindow.cxx:312 msgid "Invalid entry for Spelling." msgstr "" #: KasumiWordType.cxx:36 KasumiWordType.cxx:37 KasumiWordType.cxx:38 #: KasumiWordType.cxx:39 KasumiWordType.cxx:40 KasumiWordType.cxx:41 msgid "Noun" msgstr "" #: KasumiWordType.cxx:36 msgid "General Noun" msgstr "" #: KasumiWordType.cxx:37 msgid "followed by NA, SA and SURU" msgstr "" #: KasumiWordType.cxx:38 msgid "followed by NA and SA" msgstr "" #: KasumiWordType.cxx:39 msgid "followed by NA and SURU" msgstr "" #: KasumiWordType.cxx:40 msgid "followed by NA" msgstr "" #: KasumiWordType.cxx:41 KasumiWordType.cxx:51 msgid "followed by SURU" msgstr "" #: KasumiWordType.cxx:42 KasumiWordType.cxx:43 KasumiWordType.cxx:44 msgid "Proper Noun" msgstr "" #: KasumiWordType.cxx:42 msgid "Name of people" msgstr "" #: KasumiWordType.cxx:43 msgid "Geographic Name" msgstr "" #: KasumiWordType.cxx:44 msgid "Corporate Name" msgstr "" #: KasumiWordType.cxx:45 msgid "Numeral" msgstr "" #: KasumiWordType.cxx:46 msgid "Adjective (Keiyoushi)" msgstr "" #: KasumiWordType.cxx:47 KasumiWordType.cxx:48 KasumiWordType.cxx:49 #: KasumiWordType.cxx:50 KasumiWordType.cxx:51 msgid "Adverb" msgstr "" #: KasumiWordType.cxx:47 msgid "General Adverb" msgstr "" #: KasumiWordType.cxx:48 msgid "followed by TO and TARU" msgstr "" #: KasumiWordType.cxx:49 msgid "followed by TO and SURU" msgstr "" #: KasumiWordType.cxx:50 msgid "followed by TO" msgstr "" #: KasumiWordType.cxx:52 msgid "Interjection" msgstr "" #: KasumiWordType.cxx:53 msgid "Adnominal adjunct" msgstr "" #: KasumiWordType.cxx:54 msgid "Single Kanji Character" msgstr "" #: KasumiWordType.cxx:55 KasumiWordType.cxx:56 KasumiWordType.cxx:57 #: KasumiWordType.cxx:58 KasumiWordType.cxx:59 KasumiWordType.cxx:60 #: KasumiWordType.cxx:61 KasumiWordType.cxx:62 KasumiWordType.cxx:63 msgid "Verb" msgstr "" #: KasumiWordType.cxx:55 KasumiWordType.cxx:64 msgid "Ka 5" msgstr "" #: KasumiWordType.cxx:56 KasumiWordType.cxx:65 msgid "Ga 5" msgstr "" #: KasumiWordType.cxx:57 KasumiWordType.cxx:66 msgid "Sa 5" msgstr "" #: KasumiWordType.cxx:58 KasumiWordType.cxx:67 msgid "Ta 5" msgstr "" #: KasumiWordType.cxx:59 KasumiWordType.cxx:68 msgid "Na 5" msgstr "" #: KasumiWordType.cxx:60 KasumiWordType.cxx:69 msgid "Ba 5" msgstr "" #: KasumiWordType.cxx:61 KasumiWordType.cxx:70 msgid "Ma 5" msgstr "" #: KasumiWordType.cxx:62 KasumiWordType.cxx:71 msgid "Ra 5" msgstr "" #: KasumiWordType.cxx:63 KasumiWordType.cxx:72 msgid "Wa 5" msgstr "" #: KasumiWordType.cxx:64 KasumiWordType.cxx:65 KasumiWordType.cxx:66 #: KasumiWordType.cxx:67 KasumiWordType.cxx:68 KasumiWordType.cxx:69 #: KasumiWordType.cxx:70 KasumiWordType.cxx:71 KasumiWordType.cxx:72 msgid "Verb*" msgstr "" kasumi-2.5/po/POTFILES.in0000644000175000017500000000052410514101525011760 00000000000000./main.cxx ./KasumiString.hxx ./KasumiDic.hxx ./KasumiDic.cxx ./KasumiWord.hxx ./KasumiWord.cxx ./KasumiString.cxx ./KasumiString.hxx ./KasumiException.hxx ./KasumiException.cxx ./KasumiMainWindow.hxx ./KasumiMainWindow.cxx ./KasumiAddWindow.hxx ./KasumiAddWindow.cxx ./KasumiConfiguration.cxx ./KasumiConfiguration.hxx ./KasumiWordType.cxxkasumi-2.5/po/it.po0000644000175000017500000001474111231304002011155 00000000000000# translation of it.po to Italian # Copyright (C) 2006 Free Software Foundation, Inc. # This file is distributed under the same license as the PACKAGE package. # # Diego 'Flameeyes' Pettenò , 2006. msgid "" msgstr "" "Project-Id-Version: it\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-07-21 18:18+0900\n" "PO-Revision-Date: 2006-06-25 13:04+0900\n" "Last-Translator: Diego 'Flameeyes' Pettenò \n" "Language-Team: Italian\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.2\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: KasumiWord.cxx:191 KasumiWord.cxx:214 msgid "" "Sound must consist of only Hiragana characters. You have entered invalid " "character: " msgstr "" "Il suono deve contenere solo caratteri Hiragana. Sono stati inseriti " "caratteri non validi." #: KasumiMainWindow.cxx:81 msgid "Kasumi" msgstr "Kasumi" #: KasumiMainWindow.cxx:106 msgid "Search:" msgstr "" #: KasumiMainWindow.cxx:118 msgid "Search by Spelling" msgstr "Cerca per ortografia" #: KasumiMainWindow.cxx:124 msgid "Search by Sound" msgstr "Cerca per suono" #: KasumiMainWindow.cxx:180 KasumiAddWindow.cxx:71 msgid "Spelling" msgstr "Ortografia" #: KasumiMainWindow.cxx:196 KasumiAddWindow.cxx:88 msgid "Sound" msgstr "Suono" #: KasumiMainWindow.cxx:222 KasumiAddWindow.cxx:105 msgid "Frequency" msgstr "Frequenza" #: KasumiMainWindow.cxx:257 msgid "WordClass" msgstr "WordClass" #: KasumiMainWindow.cxx:375 msgid "" "Your dictionary was changed. Do you save these changes before Kasumi quits?" msgstr "" "Il tuo vocabolario è stato cambiato. Si vogliono salvare queste modifiche " "prima di uscire da Kasumi?" #: KasumiAddWindow.cxx:58 msgid "Kasumi (Register words)" msgstr "" #: KasumiAddWindow.cxx:127 msgid "Word Type" msgstr "Tipo di parola" #: KasumiAddWindow.cxx:176 msgid "Subcategory of Word Type" msgstr "" #: KasumiAddWindow.cxx:209 #, fuzzy msgid "Add entered word and quit registration." msgstr "Salva il vocabolario ed esci da questa applicazione." #: KasumiAddWindow.cxx:210 #, fuzzy msgid "" "If all the necessary items are filled in, add entered word and quit " "registration." msgstr "" "Se tutti gli oggetti necessari sono stati riempiti, aggiungi la parola " "inserita." #: KasumiAddWindow.cxx:217 KasumiAddWindow.cxx:218 #, fuzzy msgid "Cancel registration and quit." msgstr "Salva il vocabolario ed esci da questa applicazione." #: KasumiAddWindow.cxx:231 msgid "Add entered word" msgstr "Aggiungi la parola inserita" #: KasumiAddWindow.cxx:232 msgid "If all the necessary items are filled in, add entered word." msgstr "" "Se tutti gli oggetti necessari sono stati riempiti, aggiungi la parola " "inserita." #: KasumiAddWindow.cxx:239 msgid "Manage mode" msgstr "Modalità gestione" #: KasumiAddWindow.cxx:240 msgid "Make the shift to manage mode to modify and remove registered words." msgstr "" "Passa a modalità gestione per modificare e rimuovere le parole registrate." #: KasumiAddWindow.cxx:247 msgid "Quit this application" msgstr "Esci da questa applicazione" #: KasumiAddWindow.cxx:248 msgid "Save dictionary and quit this application." msgstr "Salva il vocabolario ed esci da questa applicazione." #: KasumiAddWindow.cxx:299 msgid "Invalid entry for Sound." msgstr "Elemento per \"suono\" non valido." #: KasumiAddWindow.cxx:312 msgid "Invalid entry for Spelling." msgstr "Elemento per \"ortografia\" non valido. " #: KasumiWordType.cxx:36 KasumiWordType.cxx:37 KasumiWordType.cxx:38 #: KasumiWordType.cxx:39 KasumiWordType.cxx:40 KasumiWordType.cxx:41 #, fuzzy msgid "Noun" msgstr "Suono" #: KasumiWordType.cxx:36 msgid "General Noun" msgstr "" #: KasumiWordType.cxx:37 msgid "followed by NA, SA and SURU" msgstr "" #: KasumiWordType.cxx:38 msgid "followed by NA and SA" msgstr "" #: KasumiWordType.cxx:39 msgid "followed by NA and SURU" msgstr "" #: KasumiWordType.cxx:40 msgid "followed by NA" msgstr "" #: KasumiWordType.cxx:41 KasumiWordType.cxx:51 msgid "followed by SURU" msgstr "" #: KasumiWordType.cxx:42 KasumiWordType.cxx:43 KasumiWordType.cxx:44 msgid "Proper Noun" msgstr "" #: KasumiWordType.cxx:42 msgid "Name of people" msgstr "" #: KasumiWordType.cxx:43 msgid "Geographic Name" msgstr "" #: KasumiWordType.cxx:44 msgid "Corporate Name" msgstr "" #: KasumiWordType.cxx:45 msgid "Numeral" msgstr "" #: KasumiWordType.cxx:46 msgid "Adjective (Keiyoushi)" msgstr "" #: KasumiWordType.cxx:47 KasumiWordType.cxx:48 KasumiWordType.cxx:49 #: KasumiWordType.cxx:50 KasumiWordType.cxx:51 msgid "Adverb" msgstr "" #: KasumiWordType.cxx:47 msgid "General Adverb" msgstr "" #: KasumiWordType.cxx:48 msgid "followed by TO and TARU" msgstr "" #: KasumiWordType.cxx:49 msgid "followed by TO and SURU" msgstr "" #: KasumiWordType.cxx:50 msgid "followed by TO" msgstr "" #: KasumiWordType.cxx:52 msgid "Interjection" msgstr "" #: KasumiWordType.cxx:53 msgid "Adnominal adjunct" msgstr "" #: KasumiWordType.cxx:54 msgid "Single Kanji Character" msgstr "" #: KasumiWordType.cxx:55 KasumiWordType.cxx:56 KasumiWordType.cxx:57 #: KasumiWordType.cxx:58 KasumiWordType.cxx:59 KasumiWordType.cxx:60 #: KasumiWordType.cxx:61 KasumiWordType.cxx:62 KasumiWordType.cxx:63 msgid "Verb" msgstr "" #: KasumiWordType.cxx:55 KasumiWordType.cxx:64 msgid "Ka 5" msgstr "" #: KasumiWordType.cxx:56 KasumiWordType.cxx:65 msgid "Ga 5" msgstr "" #: KasumiWordType.cxx:57 KasumiWordType.cxx:66 msgid "Sa 5" msgstr "" #: KasumiWordType.cxx:58 KasumiWordType.cxx:67 msgid "Ta 5" msgstr "" #: KasumiWordType.cxx:59 KasumiWordType.cxx:68 msgid "Na 5" msgstr "" #: KasumiWordType.cxx:60 KasumiWordType.cxx:69 msgid "Ba 5" msgstr "" #: KasumiWordType.cxx:61 KasumiWordType.cxx:70 msgid "Ma 5" msgstr "" #: KasumiWordType.cxx:62 KasumiWordType.cxx:71 msgid "Ra 5" msgstr "" #: KasumiWordType.cxx:63 KasumiWordType.cxx:72 msgid "Wa 5" msgstr "" #: KasumiWordType.cxx:64 KasumiWordType.cxx:65 KasumiWordType.cxx:66 #: KasumiWordType.cxx:67 KasumiWordType.cxx:68 KasumiWordType.cxx:69 #: KasumiWordType.cxx:70 KasumiWordType.cxx:71 KasumiWordType.cxx:72 msgid "Verb*" msgstr "" #~ msgid "search" #~ msgstr "cerca" #, fuzzy #~ msgid "Word Type Category" #~ msgstr "Tipo di parola" #~ msgid "Add" #~ msgstr "Aggiungi" #~ msgid "Quit" #~ msgstr "Esci" #~ msgid "Edit" #~ msgstr "Modifica" #~ msgid "Cannot find a specific word. Search from first?" #~ msgstr "" #~ "Impossibile trovare una parola specifica. Si vuole cercare dall'inizio?" #~ msgid "Cannot find a specific word." #~ msgstr "Impossibile trovare una parola specifica." kasumi-2.5/po/ja.po0000644000175000017500000001725011231304002011131 00000000000000# Kasumi's Japanese translated message # Copyright (C) 2004-2006 Takashi Nakamoto # This file is distributed under the same license as the Kasumi package. # Takashi Nakamoto , 2006 # msgid "" msgstr "" "Project-Id-Version: 0.4.0\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-07-21 18:18+0900\n" "PO-Revision-Date: 2006-10-15 22:30+0900\n" "Last-Translator: Takashi Nakamoto \n" "Language-Team: Takashi Nakamoto \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=EUC-JP\n" "Content-Transfer-Encoding: 8bit\n" #: KasumiWord.cxx:191 KasumiWord.cxx:214 msgid "" "Sound must consist of only Hiragana characters. You have entered invalid " "character: " msgstr "ɤߤˤҤ餬ʰʳʸϤ뤳ȤϤǤޤ: " #: KasumiMainWindow.cxx:81 msgid "Kasumi" msgstr "" #: KasumiMainWindow.cxx:106 msgid "Search:" msgstr ":" #: KasumiMainWindow.cxx:118 msgid "Search by Spelling" msgstr "ñǸ" #: KasumiMainWindow.cxx:124 msgid "Search by Sound" msgstr "ɤߤǸ" #: KasumiMainWindow.cxx:180 KasumiAddWindow.cxx:71 msgid "Spelling" msgstr "ñ" #: KasumiMainWindow.cxx:196 KasumiAddWindow.cxx:88 msgid "Sound" msgstr "ɤ" #: KasumiMainWindow.cxx:222 KasumiAddWindow.cxx:105 msgid "Frequency" msgstr "" #: KasumiMainWindow.cxx:257 msgid "WordClass" msgstr "ʻ" #: KasumiMainWindow.cxx:375 msgid "" "Your dictionary was changed. Do you save these changes before Kasumi quits?" msgstr "ѹäޤλ¸ޤ" #: KasumiAddWindow.cxx:58 msgid "Kasumi (Register words)" msgstr " (ñϿ)" # ʻʬ #: KasumiAddWindow.cxx:127 msgid "Word Type" msgstr "ʻ" #: KasumiAddWindow.cxx:176 msgid "Subcategory of Word Type" msgstr "ʻκʬ" #: KasumiAddWindow.cxx:209 msgid "Add entered word and quit registration." msgstr "Ϥ줿ñϿñϿλޤ" #: KasumiAddWindow.cxx:210 msgid "" "If all the necessary items are filled in, add entered word and quit " "registration." msgstr "" "Ƥɬ׻बƤ顢Ϥ줿ñϿñϿ򤷤夦" "礦ޤ" #: KasumiAddWindow.cxx:217 KasumiAddWindow.cxx:218 msgid "Cancel registration and quit." msgstr "ñϿǤޤ" #: KasumiAddWindow.cxx:231 msgid "Add entered word" msgstr "Ϥ줿ñɲä" #: KasumiAddWindow.cxx:232 msgid "If all the necessary items are filled in, add entered word." msgstr "Ƥɬ׻बƤ顢Ϥ줿ñɲäޤ" #: KasumiAddWindow.cxx:239 msgid "Manage mode" msgstr "⡼" #: KasumiAddWindow.cxx:240 msgid "Make the shift to manage mode to modify and remove registered words." msgstr "ñѹԤ뼭⡼ɤ˰ܹԤޤ" #: KasumiAddWindow.cxx:247 msgid "Quit this application" msgstr "Υץꥱλ" #: KasumiAddWindow.cxx:248 msgid "Save dictionary and quit this application." msgstr "¸ơΥץꥱλޤ" #: KasumiAddWindow.cxx:299 msgid "Invalid entry for Sound." msgstr "ɤߡפιܤϤƤ" #: KasumiAddWindow.cxx:312 msgid "Invalid entry for Spelling." msgstr "ñפιܤϤƤ" #: KasumiWordType.cxx:36 KasumiWordType.cxx:37 KasumiWordType.cxx:38 #: KasumiWordType.cxx:39 KasumiWordType.cxx:40 KasumiWordType.cxx:41 msgid "Noun" msgstr "̾" #: KasumiWordType.cxx:36 msgid "General Noun" msgstr "̾" #: KasumiWordType.cxx:37 msgid "followed by NA, SA and SURU" msgstr "֤ʡס֤ס֤פ³" #: KasumiWordType.cxx:38 msgid "followed by NA and SA" msgstr "֤ʡס֤פ³" #: KasumiWordType.cxx:39 msgid "followed by NA and SURU" msgstr "֤ʡס֤פ³" #: KasumiWordType.cxx:40 msgid "followed by NA" msgstr "֤ʡפ³" #: KasumiWordType.cxx:41 KasumiWordType.cxx:51 msgid "followed by SURU" msgstr "֤פ³" #: KasumiWordType.cxx:42 KasumiWordType.cxx:43 KasumiWordType.cxx:44 msgid "Proper Noun" msgstr "ͭ̾" #: KasumiWordType.cxx:42 msgid "Name of people" msgstr "̾" #: KasumiWordType.cxx:43 msgid "Geographic Name" msgstr "̾" #: KasumiWordType.cxx:44 msgid "Corporate Name" msgstr "̾" #: KasumiWordType.cxx:45 msgid "Numeral" msgstr "" #: KasumiWordType.cxx:46 msgid "Adjective (Keiyoushi)" msgstr "ƻ" #: KasumiWordType.cxx:47 KasumiWordType.cxx:48 KasumiWordType.cxx:49 #: KasumiWordType.cxx:50 KasumiWordType.cxx:51 msgid "Adverb" msgstr "" #: KasumiWordType.cxx:47 msgid "General Adverb" msgstr "Ū" #: KasumiWordType.cxx:48 msgid "followed by TO and TARU" msgstr "֤ȡס֤פ³" #: KasumiWordType.cxx:49 msgid "followed by TO and SURU" msgstr "֤ȡס֤פ³" #: KasumiWordType.cxx:50 msgid "followed by TO" msgstr "֤ȡפ³" #: KasumiWordType.cxx:52 msgid "Interjection" msgstr "ư졦³" #: KasumiWordType.cxx:53 msgid "Adnominal adjunct" msgstr "Ϣλ" #: KasumiWordType.cxx:54 msgid "Single Kanji Character" msgstr "ñ" #: KasumiWordType.cxx:55 KasumiWordType.cxx:56 KasumiWordType.cxx:57 #: KasumiWordType.cxx:58 KasumiWordType.cxx:59 KasumiWordType.cxx:60 #: KasumiWordType.cxx:61 KasumiWordType.cxx:62 KasumiWordType.cxx:63 msgid "Verb" msgstr "ư" #: KasumiWordType.cxx:55 KasumiWordType.cxx:64 msgid "Ka 5" msgstr "5" #: KasumiWordType.cxx:56 KasumiWordType.cxx:65 msgid "Ga 5" msgstr "5" #: KasumiWordType.cxx:57 KasumiWordType.cxx:66 msgid "Sa 5" msgstr "5" #: KasumiWordType.cxx:58 KasumiWordType.cxx:67 msgid "Ta 5" msgstr "5" #: KasumiWordType.cxx:59 KasumiWordType.cxx:68 msgid "Na 5" msgstr "ʹ5" #: KasumiWordType.cxx:60 KasumiWordType.cxx:69 msgid "Ba 5" msgstr "й5" #: KasumiWordType.cxx:61 KasumiWordType.cxx:70 msgid "Ma 5" msgstr "޹5" #: KasumiWordType.cxx:62 KasumiWordType.cxx:71 msgid "Ra 5" msgstr "5" #: KasumiWordType.cxx:63 KasumiWordType.cxx:72 msgid "Wa 5" msgstr "5" #: KasumiWordType.cxx:64 KasumiWordType.cxx:65 KasumiWordType.cxx:66 #: KasumiWordType.cxx:67 KasumiWordType.cxx:68 KasumiWordType.cxx:69 #: KasumiWordType.cxx:70 KasumiWordType.cxx:71 KasumiWordType.cxx:72 msgid "Verb*" msgstr "ư (Ϣѷ̾)" #~ msgid "Add" #~ msgstr "ɲ" #~ msgid "Cancel" #~ msgstr "" #~ msgid "Quit" #~ msgstr "λ" #~ msgid "Edit" #~ msgstr "Խ" #~ msgid "search" #~ msgstr "" #~ msgid "Cannot find a specific word. Search from first?" #~ msgstr "Ƥ⸫ĤޤǤǽ餫鸡ޤ" #~ msgid "Cannot find a specific word." #~ msgstr "Ƥ⸫ĤޤǤ" #~ msgid "Add mode" #~ msgstr "ñɲå⡼" #~ msgid "Word Class" #~ msgstr "ʻ" #~ msgid "Person's name" #~ msgstr "̾" #~ msgid "Place-name" #~ msgstr "̾" #~ msgid "NA connection" #~ msgstr "³" #~ msgid "SA connection" #~ msgstr "³" #~ msgid "Can be Bunnsetsu" #~ msgstr "촴Τߤʸ" #~ msgid "KAKUJOSHI connection" #~ msgstr "ʽ³" #~ msgid "TO connection" #~ msgstr "³" #~ msgid "TARU connection" #~ msgstr "³" #~ msgid "VerbType" #~ msgstr "ѷ" #~ msgid "Ba line, 5 columns" #~ msgstr "йԸʳ" #~ msgid "Ga line, 5 columns" #~ msgstr "Ըʳ" #~ msgid "Ka line, 5 columns" #~ msgstr "Ըʳ" #~ msgid "Ma line, 5 columns" #~ msgstr "޹Ըʳ" #~ msgid "Na line, 5 columns" #~ msgstr "ʹԸʳ" #~ msgid "Ra line, 5 columns" #~ msgstr "Ըʳ" #~ msgid "Sa line, 5 columns" #~ msgstr "Ըʳ" #~ msgid "Ta line, 5 columns" #~ msgstr "Ըʳ" #~ msgid "Wa line, 5 columns" #~ msgstr "Ըʳ" #~ msgid "Can be Meishi when Renyou type" #~ msgstr "Ϣѷ̾첽" #~ msgid "Find By Sound" #~ msgstr "ɤߤǸ" #~ msgid "Store" #~ msgstr "¸" #~ msgid "New Word" #~ msgstr "" #~ msgid "Remove" #~ msgstr "" kasumi-2.5/po/Makevars0000644000175000017500000000341610142036016011701 00000000000000# Makefile variables for PO directory in any package using GNU gettext. # Usually the message domain is the same as the package name. DOMAIN = $(PACKAGE) # These two variables depend on the location of this directory. subdir = po top_builddir = .. # These options get passed to xgettext. XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ # This is the copyright holder that gets inserted into the header of the # $(DOMAIN).pot file. Set this to the copyright holder of the surrounding # package. (Note that the msgstr strings, extracted from the package's # sources, belong to the copyright holder of the package.) Translators are # expected to transfer the copyright for their translations to this person # or entity, or to disclaim their copyright. The empty string stands for # the public domain; in this case the translators are expected to disclaim # their copyright. COPYRIGHT_HOLDER = Free Software Foundation, Inc. # This is the email address or URL to which the translators shall report # bugs in the untranslated strings: # - Strings which are not entire sentences, see the maintainer guidelines # in the GNU gettext documentation, section 'Preparing Strings'. # - Strings which use unclear terms or require additional context to be # understood. # - Strings which make invalid assumptions about notation of date, time or # money. # - Pluralisation problems. # - Incorrect English spelling. # - Incorrect formatting. # It can be your email address, or a mailing list address where translators # can write to without being subscribed, or the URL of a web page through # which the translators can contact you. MSGID_BUGS_ADDRESS = # This is the list of locale categories, beyond LC_MESSAGES, for which the # message catalogs shall be used. It is usually empty. EXTRA_LOCALE_CATEGORIES = kasumi-2.5/po/quot.sed0000644000175000017500000000023110142036016011662 00000000000000s/"\([^"]*\)"/“\1”/g s/`\([^`']*\)'/‘\1’/g s/ '\([^`']*\)' / ‘\1’ /g s/ '\([^`']*\)'$/ ‘\1’/g s/^'\([^`']*\)' /‘\1’ /g s/“”/""/g kasumi-2.5/po/ja.gmo0000644000175000017500000000727511231304002011303 000000000000009O' 1GY`e  Q; [hD +0 8DZ_*dT$-FKPV [ eKo % 4 L [d  .   # ( 0 E L Q Y f o Xt >  & &B i q t  4          2 P [ f m 4r        : '4G\w 07%  8.) &/4-91,' $6#+(!*"352 Search:Add entered wordAdd entered word and quit registration.Adjective (Keiyoushi)Adnominal adjunctAdverbBa 5Cancel registration and quit.Corporate NameFrequencyGa 5General AdverbGeneral NounGeographic NameIf all the necessary items are filled in, add entered word and quit registration.If all the necessary items are filled in, add entered word.InterjectionInvalid entry for Sound.Invalid entry for Spelling.Ka 5KasumiKasumi (Register words)Ma 5Make the shift to manage mode to modify and remove registered words.Manage modeNa 5Name of peopleNounNumeralProper NounQuit this applicationRa 5Sa 5Save dictionary and quit this application.Search by SoundSearch by SpellingSingle Kanji CharacterSoundSound must consist of only Hiragana characters. You have entered invalid character: SpellingSubcategory of Word TypeTa 5VerbVerb*Wa 5Word TypeWordClassYour dictionary was changed. Do you save these changes before Kasumi quits?followed by NAfollowed by NA and SAfollowed by NA and SURUfollowed by NA, SA and SURUfollowed by SURUfollowed by TOfollowed by TO and SURUfollowed by TO and TARUProject-Id-Version: 0.4.0 Report-Msgid-Bugs-To: POT-Creation-Date: 2009-07-21 18:18+0900 PO-Revision-Date: 2006-10-15 22:30+0900 Last-Translator: Takashi Nakamoto Language-Team: Takashi Nakamoto MIME-Version: 1.0 Content-Type: text/plain; charset=EUC-JP Content-Transfer-Encoding: 8bit :Ϥ줿ñɲäϤ줿ñϿñϿλޤƻϢλй5ñϿǤޤ̾5Ū̾̾Ƥɬ׻बƤ顢Ϥ줿ñϿñϿ򤷤夦礦ޤƤɬ׻बƤ顢Ϥ줿ñɲäޤư졦³ɤߡפιܤϤƤñפιܤϤƤ5 (ñϿ)޹5ñѹԤ뼭⡼ɤ˰ܹԤޤ⡼ʹ5̾̾ͭ̾Υץꥱλ55¸ơΥץꥱλޤɤߤǸñǸñɤɤߤˤҤ餬ʰʳʸϤ뤳ȤϤǤޤ: ñʻκʬ5ưư (Ϣѷ̾)5ʻʻѹäޤλ¸ޤ֤ʡפ³֤ʡס֤פ³֤ʡס֤פ³֤ʡס֤ס֤פ³֤פ³֤ȡפ³֤ȡס֤פ³֤ȡס֤פ³kasumi-2.5/po/insert-header.sin0000644000175000017500000000124010142036016013443 00000000000000# Sed script that inserts the file called HEADER before the header entry. # # At each occurrence of a line starting with "msgid ", we execute the following # commands. At the first occurrence, insert the file. At the following # occurrences, do nothing. The distinction between the first and the following # occurrences is achieved by looking at the hold space. /^msgid /{ x # Test if the hold space is empty. s/m/m/ ta # Yes it was empty. First occurrence. Read the file. r HEADER # Output the file's contents by reading the next line. But don't lose the # current line while doing this. g N bb :a # The hold space was nonempty. Following occurrences. Do nothing. x :b } kasumi-2.5/po/ChangeLog0000644000175000017500000000070410142036016011754 000000000000002004-10-18 gettextize * Makefile.in.in: New file, from gettext-0.12.1. * Rules-quot: New file, from gettext-0.12.1. * boldquot.sed: New file, from gettext-0.12.1. * en@boldquot.header: New file, from gettext-0.12.1. * en@quot.header: New file, from gettext-0.12.1. * insert-header.sin: New file, from gettext-0.12.1. * quot.sed: New file, from gettext-0.12.1. * remove-potcdate.sin: New file, from gettext-0.12.1. kasumi-2.5/po/en@boldquot.header0000644000175000017500000000247110142036016013633 00000000000000# All this catalog "translates" are quotation characters. # The msgids must be ASCII and therefore cannot contain real quotation # characters, only substitutes like grave accent (0x60), apostrophe (0x27) # and double quote (0x22). These substitutes look strange; see # http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html # # This catalog translates grave accent (0x60) and apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019). # It also translates pairs of apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019) # and pairs of quotation mark (0x22) to # left double quotation mark (U+201C) and right double quotation mark (U+201D). # # When output to an UTF-8 terminal, the quotation characters appear perfectly. # When output to an ISO-8859-1 terminal, the single quotation marks are # transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to # grave/acute accent (by libiconv), and the double quotation marks are # transliterated to 0x22. # When output to an ASCII terminal, the single quotation marks are # transliterated to apostrophes, and the double quotation marks are # transliterated to 0x22. # # This catalog furthermore displays the text between the quotation marks in # bold face, assuming the VT100/XTerm escape sequences. # kasumi-2.5/po/it.gmo0000644000175000017500000000371611231304002011321 00000000000000L ;1MDT * Td m wKzH dPn &KZm4Z DO ^eh    Add entered wordFrequencyIf all the necessary items are filled in, add entered word.Invalid entry for Sound.Invalid entry for Spelling.KasumiMake the shift to manage mode to modify and remove registered words.Manage modeQuit this applicationSave dictionary and quit this application.Search by SoundSearch by SpellingSoundSound must consist of only Hiragana characters. You have entered invalid character: SpellingWord TypeWordClassYour dictionary was changed. Do you save these changes before Kasumi quits?Project-Id-Version: it Report-Msgid-Bugs-To: POT-Creation-Date: 2009-07-21 18:18+0900 PO-Revision-Date: 2006-06-25 13:04+0900 Last-Translator: Diego 'Flameeyes' Pettenò Language-Team: Italian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-Generator: KBabel 1.11.2 Plural-Forms: nplurals=2; plural=(n != 1); Aggiungi la parola inseritaFrequenzaSe tutti gli oggetti necessari sono stati riempiti, aggiungi la parola inserita.Elemento per "suono" non valido.Elemento per "ortografia" non valido. KasumiPassa a modalità gestione per modificare e rimuovere le parole registrate.Modalità gestioneEsci da questa applicazioneSalva il vocabolario ed esci da questa applicazione.Cerca per suonoCerca per ortografiaSuonoIl suono deve contenere solo caratteri Hiragana. Sono stati inseriti caratteri non validi.OrtografiaTipo di parolaWordClassIl tuo vocabolario è stato cambiato. Si vogliono salvare queste modifiche prima di uscire da Kasumi?kasumi-2.5/po/Rules-quot0000644000175000017500000000323110142036016012203 00000000000000# Special Makefile rules for English message catalogs with quotation marks. DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot .SUFFIXES: .insert-header .po-update-en en@quot.po-update: en@quot.po-update-en en@boldquot.po-update: en@boldquot.po-update-en .insert-header.po-update-en: @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \ if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \ tmpdir=`pwd`; \ echo "$$lang:"; \ ll=`echo $$lang | sed -e 's/@.*//'`; \ LC_ALL=C; export LC_ALL; \ cd $(srcdir); \ if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ rm -f $$tmpdir/$$lang.new.po; \ else \ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ :; \ else \ echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ exit 1; \ fi; \ fi; \ else \ echo "creation of $$lang.po failed!" 1>&2; \ rm -f $$tmpdir/$$lang.new.po; \ fi en@quot.insert-header: insert-header.sin sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header en@boldquot.insert-header: insert-header.sin sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header mostlyclean: mostlyclean-quot mostlyclean-quot: rm -f *.insert-header kasumi-2.5/configure0000755000175000017500000116777111227745462011537 00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.63 for main.cxx 2.0. # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, # 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi # PATH needs CR # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 { (exit 1); exit 1; } fi # Work around bugs in pre-3.0 UWIN ksh. for as_var in ENV MAIL MAILPATH do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # CDPATH. $as_unset CDPATH if test "x$CONFIG_SHELL" = x; then if (eval ":") 2>/dev/null; then as_have_required=yes else as_have_required=no fi if test $as_have_required = yes && (eval ": (as_func_return () { (exit \$1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = \"\$1\" ); then : else exitcode=1 echo positional parameters were not saved. fi test \$exitcode = 0) || { (exit 1); exit 1; } ( as_lineno_1=\$LINENO as_lineno_2=\$LINENO test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } ") 2> /dev/null; then : else as_candidate_shells= as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. case $as_dir in /*) for as_base in sh bash ksh sh5; do as_candidate_shells="$as_candidate_shells $as_dir/$as_base" done;; esac done IFS=$as_save_IFS for as_shell in $as_candidate_shells $SHELL; do # Try only shells that exist, to save several forks. if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { ("$as_shell") 2> /dev/null <<\_ASEOF if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi : _ASEOF }; then CONFIG_SHELL=$as_shell as_have_required=yes if { "$as_shell" 2> /dev/null <<\_ASEOF if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi : (as_func_return () { (exit $1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = "$1" ); then : else exitcode=1 echo positional parameters were not saved. fi test $exitcode = 0) || { (exit 1); exit 1; } ( as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } _ASEOF }; then break fi fi done if test "x$CONFIG_SHELL" != x; then for as_var in BASH_ENV ENV do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done export CONFIG_SHELL exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} fi if test $as_have_required = no; then echo This script requires a shell more modern than all the echo shells that I found on your system. Please install a echo modern shell, or manually run the script under such a echo shell if you do have one. { (exit 1); exit 1; } fi fi fi (eval "as_func_return () { (exit \$1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = \"\$1\" ); then : else exitcode=1 echo positional parameters were not saved. fi test \$exitcode = 0") || { echo No shell found that supports shell functions. echo Please tell bug-autoconf@gnu.org about your system, echo including any error possibly output before this message. echo This can help us improve future autoconf versions. echo Configuration will now proceed without shell functions. } as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line after each line using $LINENO; the second 'sed' # does the real work. The second script uses 'N' to pair each # line-number line with the line containing $LINENO, and appends # trailing '-' during substitution so that $LINENO is not a special # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # scripts with optimization help from Paolo Bonzini. Blame Lee # E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in -n*) case `echo 'x\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. *) ECHO_C='\c';; esac;; *) ECHO_N='-n';; esac if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='main.cxx' PACKAGE_TARNAME='main-cxx' PACKAGE_VERSION='2.0' PACKAGE_STRING='main.cxx 2.0' PACKAGE_BUGREPORT='' # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_subst_vars='LTLIBOBJS LIBOBJS GTK_LIBS GTK_CFLAGS PKG_CONFIG POSUB LTLIBINTL LIBINTL INTLLIBS INTL_LIBTOOL_SUFFIX_PREFIX INTLOBJS GENCAT INSTOBJEXT DATADIRNAME CATOBJEXT USE_INCLUDED_LIBINTL BUILD_INCLUDED_LIBINTL INTLBISON LTLIBICONV LIBICONV GLIBC21 ALLOCA EGREP GREP CPP RANLIB host_os host_vendor host_cpu host build_os build_vendor build_cpu build MSGMERGE XGETTEXT GMSGFMT MSGFMT USE_NLS MKINSTALLDIRS am__fastdepCXX_FALSE am__fastdepCXX_TRUE CXXDEPMODE ac_ct_CXX CXXFLAGS CXX am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__quote am__include DEPDIR OBJEXT EXEEXT ac_ct_CC CPPFLAGS LDFLAGS CFLAGS CC am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_dependency_tracking enable_nls with_gnu_ld enable_rpath with_libiconv_prefix with_included_gettext with_libintl_prefix enable_gtktest ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS CXX CXXFLAGS CCC CPP' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) { $as_echo "$as_me: error: unrecognized option: $ac_option Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 { (exit 1); exit 1; }; } eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` { $as_echo "$as_me: error: missing argument to $ac_option" >&2 { (exit 1); exit 1; }; } fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2 { (exit 1); exit 1; }; } ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; } done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || { $as_echo "$as_me: error: working directory cannot be determined" >&2 { (exit 1); exit 1; }; } test "X$ac_ls_di" = "X$ac_pwd_ls_di" || { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 { (exit 1); exit 1; }; } # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 { (exit 1); exit 1; }; } fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 { (exit 1); exit 1; }; } pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures main.cxx 2.0 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/main-cxx] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of main.cxx 2.0:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors --disable-nls do not use Native Language Support --disable-rpath do not hardcode runtime library paths --disable-gtktest do not try to compile and run a test GTK+ program Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-gnu-ld assume the C compiler uses GNU ld default=no --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib --without-libiconv-prefix don't search for libiconv in includedir and libdir --with-included-gettext use the GNU gettext library included here --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib --without-libintl-prefix don't search for libintl in includedir and libdir Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if you have headers in a nonstandard directory CXX C++ compiler command CXXFLAGS C++ compiler flags CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF main.cxx configure 2.0 generated by GNU Autoconf 2.63 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by main.cxx $as_me 2.0, which was generated by GNU Autoconf 2.63. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; 2) ac_configure_args1="$ac_configure_args1 '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac done done $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## ## ---------------- ## _ASBOX echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) $as_unset $ac_var ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo cat <<\_ASBOX ## ----------------- ## ## Output variables. ## ## ----------------- ## _ASBOX echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then cat <<\_ASBOX ## ------------------- ## ## File substitutions. ## ## ------------------- ## _ASBOX echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## ## confdefs.h. ## ## ----------- ## _ASBOX echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then ac_site_file1=$CONFIG_SITE elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test -r "$ac_site_file"; then { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special # files actually), so we avoid doing that. if test -f "$cache_file"; then { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 $as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu am__api_version='1.10' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 $as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} { (exit 1); exit 1; }; } fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&5 $as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&2;} { (exit 1); exit 1; }; } fi test "$2" = conftest.file ) then # Ok. : else { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! Check your system clock" >&5 $as_echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi { $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if test "${ac_cv_path_mkdir+set}" = set; then $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. test -d ./--version && rmdir ./--version MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } mkdir_p="$MKDIR_P" case $mkdir_p in [\\/$]* | ?:[\\/]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_AWK+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:$LINENO: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 $as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE=kasumi VERSION=2.5 cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. AMTAR=${AMTAR-"${am_missing_run}tar"} am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' ac_config_headers="$ac_config_headers config.h" ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&5 $as_echo "$as_me: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; }; } # Provide some information about the compiler. $as_echo "$as_me:$LINENO: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 { (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -v >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -V >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 $as_echo_n "checking for C compiler default output file name... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { (ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi { $as_echo "$as_me:$LINENO: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } if test -z "$ac_file"; then $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables See \`config.log' for more details." >&5 $as_echo "$as_me: error: C compiler cannot create executables See \`config.log' for more details." >&2;} { (exit 77); exit 77; }; }; } fi ac_exeext=$ac_cv_exeext # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5 $as_echo_n "checking whether the C compiler works... " >&6; } # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 # If not cross compiling, check that we can run a simple program. if test "$cross_compiling" != yes; then if { ac_try='./$ac_file' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&5 $as_echo "$as_me: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; }; } fi fi fi { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } { $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } { $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&5 $as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; }; } fi rm -f conftest$ac_cv_exeext { $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT { $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if test "${ac_cv_objext+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&5 $as_echo "$as_me: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; }; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 CFLAGS="" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if test "${ac_cv_prog_cc_c89+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_c89=$ac_arg else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:$LINENO: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:$LINENO: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo done .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi { $as_echo "$as_me:$LINENO: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi depcc="$CC" am_compiler_list= { $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu if test -z "$CXX"; then if test -n "$CCC"; then CXX=$CCC else if test -n "$ac_tool_prefix"; then for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CXX"; then ac_cv_prog_CXX="$CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CXX=$ac_cv_prog_CXX if test -n "$CXX"; then { $as_echo "$as_me:$LINENO: result: $CXX" >&5 $as_echo "$CXX" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CXX" && break done fi if test -z "$CXX"; then ac_ct_CXX=$CXX for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CXX"; then ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CXX="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CXX=$ac_cv_prog_ac_ct_CXX if test -n "$ac_ct_CXX"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 $as_echo "$ac_ct_CXX" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CXX" && break done if test "x$ac_ct_CXX" = x; then CXX="g++" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CXX=$ac_ct_CXX fi fi fi fi # Provide some information about the compiler. $as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5 set X $ac_compile ac_compiler=$2 { (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -v >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -V >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 $as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } if test "${ac_cv_cxx_compiler_gnu+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_cxx_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 $as_echo "$ac_cv_cxx_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GXX=yes else GXX= fi ac_test_CXXFLAGS=${CXXFLAGS+set} ac_save_CXXFLAGS=$CXXFLAGS { $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 $as_echo_n "checking whether $CXX accepts -g... " >&6; } if test "${ac_cv_prog_cxx_g+set}" = set; then $as_echo_n "(cached) " >&6 else ac_save_cxx_werror_flag=$ac_cxx_werror_flag ac_cxx_werror_flag=yes ac_cv_prog_cxx_g=no CXXFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cxx_g=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 CXXFLAGS="" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cxx_werror_flag=$ac_save_cxx_werror_flag CXXFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cxx_g=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cxx_werror_flag=$ac_save_cxx_werror_flag fi { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 $as_echo "$ac_cv_prog_cxx_g" >&6; } if test "$ac_test_CXXFLAGS" = set; then CXXFLAGS=$ac_save_CXXFLAGS elif test $ac_cv_prog_cxx_g = yes; then if test "$GXX" = yes; then CXXFLAGS="-g -O2" else CXXFLAGS="-g" fi else if test "$GXX" = yes; then CXXFLAGS="-O2" else CXXFLAGS= fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CXX" am_compiler_list= { $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CXX_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CXX_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CXX_dependencies_compiler_type=none fi fi { $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 $as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then am__fastdepCXX_TRUE= am__fastdepCXX_FALSE='#' else am__fastdepCXX_TRUE='#' am__fastdepCXX_FALSE= fi ALL_LINGUAS="ja it" MKINSTALLDIRS= if test -n "$ac_aux_dir"; then case "$ac_aux_dir" in /*) MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ;; *) MKINSTALLDIRS="\$(top_builddir)/$ac_aux_dir/mkinstalldirs" ;; esac fi if test -z "$MKINSTALLDIRS"; then MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" fi { $as_echo "$as_me:$LINENO: checking whether NLS is requested" >&5 $as_echo_n "checking whether NLS is requested... " >&6; } # Check whether --enable-nls was given. if test "${enable_nls+set}" = set; then enableval=$enable_nls; USE_NLS=$enableval else USE_NLS=yes fi { $as_echo "$as_me:$LINENO: result: $USE_NLS" >&5 $as_echo "$USE_NLS" >&6; } # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi # Find out how to test for executable files. Don't use a zero-byte file, # as systems may use methods other than mode bits to determine executability. cat >conf$$.file <<_ASEOF #! /bin/sh exit 0 _ASEOF chmod +x conf$$.file if test -x conf$$.file >/dev/null 2>&1; then ac_executable_p="test -x" else ac_executable_p="test -f" fi rm -f conf$$.file # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_MSGFMT+set}" = set; then $as_echo_n "(cached) " >&6 else case "$MSGFMT" in [\\/]* | ?:[\\/]*) ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ;; *) ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$ac_save_IFS" test -z "$ac_dir" && ac_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then if $ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1 && (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext" break 2 fi fi done done IFS="$ac_save_IFS" test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":" ;; esac fi MSGFMT="$ac_cv_path_MSGFMT" if test "$MSGFMT" != ":"; then { $as_echo "$as_me:$LINENO: result: $MSGFMT" >&5 $as_echo "$MSGFMT" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_GMSGFMT+set}" = set; then $as_echo_n "(cached) " >&6 else case $GMSGFMT in [\\/]* | ?:[\\/]*) ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ;; esac fi GMSGFMT=$ac_cv_path_GMSGFMT if test -n "$GMSGFMT"; then { $as_echo "$as_me:$LINENO: result: $GMSGFMT" >&5 $as_echo "$GMSGFMT" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi # Find out how to test for executable files. Don't use a zero-byte file, # as systems may use methods other than mode bits to determine executability. cat >conf$$.file <<_ASEOF #! /bin/sh exit 0 _ASEOF chmod +x conf$$.file if test -x conf$$.file >/dev/null 2>&1; then ac_executable_p="test -x" else ac_executable_p="test -f" fi rm -f conf$$.file # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_XGETTEXT+set}" = set; then $as_echo_n "(cached) " >&6 else case "$XGETTEXT" in [\\/]* | ?:[\\/]*) ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ;; *) ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$ac_save_IFS" test -z "$ac_dir" && ac_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 && (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext" break 2 fi fi done done IFS="$ac_save_IFS" test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" ;; esac fi XGETTEXT="$ac_cv_path_XGETTEXT" if test "$XGETTEXT" != ":"; then { $as_echo "$as_me:$LINENO: result: $XGETTEXT" >&5 $as_echo "$XGETTEXT" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi rm -f messages.po # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi # Find out how to test for executable files. Don't use a zero-byte file, # as systems may use methods other than mode bits to determine executability. cat >conf$$.file <<_ASEOF #! /bin/sh exit 0 _ASEOF chmod +x conf$$.file if test -x conf$$.file >/dev/null 2>&1; then ac_executable_p="test -x" else ac_executable_p="test -f" fi rm -f conf$$.file # Extract the first word of "msgmerge", so it can be a program name with args. set dummy msgmerge; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_MSGMERGE+set}" = set; then $as_echo_n "(cached) " >&6 else case "$MSGMERGE" in [\\/]* | ?:[\\/]*) ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. ;; *) ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$ac_save_IFS" test -z "$ac_dir" && ac_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then if $ac_dir/$ac_word --update -q /dev/null /dev/null >/dev/null 2>&1; then ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext" break 2 fi fi done done IFS="$ac_save_IFS" test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":" ;; esac fi MSGMERGE="$ac_cv_path_MSGMERGE" if test "$MSGMERGE" != ":"; then { $as_echo "$as_me:$LINENO: result: $MSGMERGE" >&5 $as_echo "$MSGMERGE" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "$GMSGFMT" != ":"; then if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 && (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then : ; else GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'` { $as_echo "$as_me:$LINENO: result: found $GMSGFMT program is not GNU msgfmt; ignore it" >&5 $as_echo "found $GMSGFMT program is not GNU msgfmt; ignore it" >&6; } GMSGFMT=":" fi fi if test "$XGETTEXT" != ":"; then if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 && (if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then : ; else { $as_echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5 $as_echo "found xgettext program is not GNU xgettext; ignore it" >&6; } XGETTEXT=":" fi rm -f messages.po fi ac_config_commands="$ac_config_commands default-1" # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 $as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} { (exit 1); exit 1; }; } { $as_echo "$as_me:$LINENO: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } if test "${ac_cv_build+set}" = set; then $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 $as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} { (exit 1); exit 1; }; } ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 $as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} { (exit 1); exit 1; }; } fi { $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; *) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 $as_echo "$as_me: error: invalid value of canonical build" >&2;} { (exit 1); exit 1; }; };; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' set x $ac_cv_build shift build_cpu=$1 build_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: build_os=$* IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac { $as_echo "$as_me:$LINENO: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } if test "${ac_cv_host+set}" = set; then $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 $as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} { (exit 1); exit 1; }; } fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; *) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 $as_echo "$as_me: error: invalid value of canonical host" >&2;} { (exit 1); exit 1; }; };; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' set x $ac_cv_host shift host_cpu=$1 host_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: host_os=$* IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_RANLIB+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5 $as_echo "$RANLIB" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_RANLIB="ranlib" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 $as_echo "$ac_ct_RANLIB" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_RANLIB" = x; then RANLIB=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac RANLIB=$ac_ct_RANLIB fi else RANLIB="$ac_cv_prog_RANLIB" fi { $as_echo "$as_me:$LINENO: checking for strerror in -lcposix" >&5 $as_echo_n "checking for strerror in -lcposix... " >&6; } if test "${ac_cv_lib_cposix_strerror+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lcposix $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char strerror (); int main () { return strerror (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_cposix_strerror=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_cposix_strerror=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_cposix_strerror" >&5 $as_echo "$ac_cv_lib_cposix_strerror" >&6; } if test "x$ac_cv_lib_cposix_strerror" = x""yes; then LIBS="$LIBS -lcposix" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test "${ac_cv_prog_CPP+set}" = set; then $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:$LINENO: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." >&5 $as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if test "${ac_cv_path_GREP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 $as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} { (exit 1); exit 1; }; } fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:$LINENO: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if test "${ac_cv_path_EGREP+set}" = set; then $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 $as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} { (exit 1); exit 1; }; } fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if test "${ac_cv_header_stdc+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_header_stdc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF #define STDC_HEADERS 1 _ACEOF fi { $as_echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 $as_echo_n "checking for an ANSI C-conforming const... " >&6; } if test "${ac_cv_c_const+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { /* FIXME: Include the comments suggested by Paul. */ #ifndef __cplusplus /* Ultrix mips cc rejects this. */ typedef int charset[2]; const charset cs; /* SunOS 4.1.1 cc rejects this. */ char const *const *pcpcc; char **ppc; /* NEC SVR4.0.2 mips cc rejects this. */ struct point {int x, y;}; static struct point const zero = {0,0}; /* AIX XL C 1.02.0.0 rejects this. It does not let you subtract one const X* pointer from another in an arm of an if-expression whose if-part is not a constant expression */ const char *g = "string"; pcpcc = &g + (g ? g-g : 0); /* HPUX 7.0 cc rejects these. */ ++pcpcc; ppc = (char**) pcpcc; pcpcc = (char const *const *) ppc; { /* SCO 3.2v4 cc rejects this. */ char *t; char const *s = 0 ? (char *) 0 : (char const *) 0; *t++ = 0; if (s) return 0; } { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ int x[] = {25, 17}; const int *foo = &x[0]; ++foo; } { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ typedef const int *iptr; iptr p = 0; ++p; } { /* AIX XL C 1.02.0.0 rejects this saying "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ struct s { int j; const int *ap[3]; }; struct s *b; b->j = 5; } { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ const int foo = 10; if (!foo) return 0; } return !cs[0] && !zero.x; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_c_const=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_c_const=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 $as_echo "$ac_cv_c_const" >&6; } if test $ac_cv_c_const = no; then cat >>confdefs.h <<\_ACEOF #define const /**/ _ACEOF fi { $as_echo "$as_me:$LINENO: checking for inline" >&5 $as_echo_n "checking for inline... " >&6; } if test "${ac_cv_c_inline+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifndef __cplusplus typedef int foo_t; static $ac_kw foo_t static_foo () {return 0; } $ac_kw foo_t foo () {return 0; } #endif _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_c_inline=$ac_kw else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext test "$ac_cv_c_inline" != no && break done fi { $as_echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 $as_echo "$ac_cv_c_inline" >&6; } case $ac_cv_c_inline in inline | yes) ;; *) case $ac_cv_c_inline in no) ac_val=;; *) ac_val=$ac_cv_c_inline;; esac cat >>confdefs.h <<_ACEOF #ifndef __cplusplus #define inline $ac_val #endif _ACEOF ;; esac # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then eval "$as_ac_Header=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done { $as_echo "$as_me:$LINENO: checking for off_t" >&5 $as_echo_n "checking for off_t... " >&6; } if test "${ac_cv_type_off_t+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_type_off_t=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof (off_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof ((off_t))) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_off_t=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5 $as_echo "$ac_cv_type_off_t" >&6; } if test "x$ac_cv_type_off_t" = x""yes; then : else cat >>confdefs.h <<_ACEOF #define off_t long int _ACEOF fi { $as_echo "$as_me:$LINENO: checking for size_t" >&5 $as_echo_n "checking for size_t... " >&6; } if test "${ac_cv_type_size_t+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_type_size_t=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof (size_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof ((size_t))) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_size_t=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 $as_echo "$ac_cv_type_size_t" >&6; } if test "x$ac_cv_type_size_t" = x""yes; then : else cat >>confdefs.h <<_ACEOF #define size_t unsigned int _ACEOF fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! { $as_echo "$as_me:$LINENO: checking for working alloca.h" >&5 $as_echo_n "checking for working alloca.h... " >&6; } if test "${ac_cv_working_alloca_h+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { char *p = (char *) alloca (2 * sizeof (int)); if (p) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_working_alloca_h=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_working_alloca_h=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_working_alloca_h" >&5 $as_echo "$ac_cv_working_alloca_h" >&6; } if test $ac_cv_working_alloca_h = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_ALLOCA_H 1 _ACEOF fi { $as_echo "$as_me:$LINENO: checking for alloca" >&5 $as_echo_n "checking for alloca... " >&6; } if test "${ac_cv_func_alloca_works+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __GNUC__ # define alloca __builtin_alloca #else # ifdef _MSC_VER # include # define alloca _alloca # else # ifdef HAVE_ALLOCA_H # include # else # ifdef _AIX #pragma alloca # else # ifndef alloca /* predefined by HP cc +Olibcalls */ char *alloca (); # endif # endif # endif # endif #endif int main () { char *p = (char *) alloca (1); if (p) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_func_alloca_works=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_func_alloca_works=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_alloca_works" >&5 $as_echo "$ac_cv_func_alloca_works" >&6; } if test $ac_cv_func_alloca_works = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_ALLOCA 1 _ACEOF else # The SVR3 libPW and SVR4 libucb both contain incompatible functions # that cause trouble. Some versions do not even contain alloca or # contain a buggy version. If you still want to use their alloca, # use ar to extract alloca.o from them instead of compiling alloca.c. ALLOCA=\${LIBOBJDIR}alloca.$ac_objext cat >>confdefs.h <<\_ACEOF #define C_ALLOCA 1 _ACEOF { $as_echo "$as_me:$LINENO: checking whether \`alloca.c' needs Cray hooks" >&5 $as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; } if test "${ac_cv_os_cray+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #if defined CRAY && ! defined CRAY2 webecray #else wenotbecray #endif _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "webecray" >/dev/null 2>&1; then ac_cv_os_cray=yes else ac_cv_os_cray=no fi rm -f conftest* fi { $as_echo "$as_me:$LINENO: result: $ac_cv_os_cray" >&5 $as_echo "$ac_cv_os_cray" >&6; } if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define CRAY_STACKSEG_END $ac_func _ACEOF break fi done fi { $as_echo "$as_me:$LINENO: checking stack direction for C alloca" >&5 $as_echo_n "checking stack direction for C alloca... " >&6; } if test "${ac_cv_c_stack_direction+set}" = set; then $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then ac_cv_c_stack_direction=0 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int find_stack_direction () { static char *addr = 0; auto char dummy; if (addr == 0) { addr = &dummy; return find_stack_direction (); } else return (&dummy > addr) ? 1 : -1; } int main () { return find_stack_direction () < 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_c_stack_direction=1 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_c_stack_direction=-1 fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_c_stack_direction" >&5 $as_echo "$ac_cv_c_stack_direction" >&6; } cat >>confdefs.h <<_ACEOF #define STACK_DIRECTION $ac_cv_c_stack_direction _ACEOF fi for ac_header in stdlib.h unistd.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 $as_echo_n "checking $ac_header usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 $as_echo_n "checking $ac_header presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ;; esac { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi as_val=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_func in getpagesize do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done { $as_echo "$as_me:$LINENO: checking for working mmap" >&5 $as_echo_n "checking for working mmap... " >&6; } if test "${ac_cv_func_mmap_fixed_mapped+set}" = set; then $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then ac_cv_func_mmap_fixed_mapped=no else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default /* malloc might have been renamed as rpl_malloc. */ #undef malloc /* Thanks to Mike Haertel and Jim Avera for this test. Here is a matrix of mmap possibilities: mmap private not fixed mmap private fixed at somewhere currently unmapped mmap private fixed at somewhere already mapped mmap shared not fixed mmap shared fixed at somewhere currently unmapped mmap shared fixed at somewhere already mapped For private mappings, we should verify that changes cannot be read() back from the file, nor mmap's back from the file at a different address. (There have been systems where private was not correctly implemented like the infamous i386 svr4.0, and systems where the VM page cache was not coherent with the file system buffer cache like early versions of FreeBSD and possibly contemporary NetBSD.) For shared mappings, we should conversely verify that changes get propagated back to all the places they're supposed to be. Grep wants private fixed already mapped. The main things grep needs to know about mmap are: * does it exist and is it safe to write into the mmap'd area * how to use it (BSD variants) */ #include #include #if !defined STDC_HEADERS && !defined HAVE_STDLIB_H char *malloc (); #endif /* This mess was copied from the GNU getpagesize.h. */ #ifndef HAVE_GETPAGESIZE /* Assume that all systems that can run configure have sys/param.h. */ # ifndef HAVE_SYS_PARAM_H # define HAVE_SYS_PARAM_H 1 # endif # ifdef _SC_PAGESIZE # define getpagesize() sysconf(_SC_PAGESIZE) # else /* no _SC_PAGESIZE */ # ifdef HAVE_SYS_PARAM_H # include # ifdef EXEC_PAGESIZE # define getpagesize() EXEC_PAGESIZE # else /* no EXEC_PAGESIZE */ # ifdef NBPG # define getpagesize() NBPG * CLSIZE # ifndef CLSIZE # define CLSIZE 1 # endif /* no CLSIZE */ # else /* no NBPG */ # ifdef NBPC # define getpagesize() NBPC # else /* no NBPC */ # ifdef PAGESIZE # define getpagesize() PAGESIZE # endif /* PAGESIZE */ # endif /* no NBPC */ # endif /* no NBPG */ # endif /* no EXEC_PAGESIZE */ # else /* no HAVE_SYS_PARAM_H */ # define getpagesize() 8192 /* punt totally */ # endif /* no HAVE_SYS_PARAM_H */ # endif /* no _SC_PAGESIZE */ #endif /* no HAVE_GETPAGESIZE */ int main () { char *data, *data2, *data3; int i, pagesize; int fd; pagesize = getpagesize (); /* First, make a file with some known garbage in it. */ data = (char *) malloc (pagesize); if (!data) return 1; for (i = 0; i < pagesize; ++i) *(data + i) = rand (); umask (0); fd = creat ("conftest.mmap", 0600); if (fd < 0) return 1; if (write (fd, data, pagesize) != pagesize) return 1; close (fd); /* Next, try to mmap the file at a fixed address which already has something else allocated at it. If we can, also make sure that we see the same garbage. */ fd = open ("conftest.mmap", O_RDWR); if (fd < 0) return 1; data2 = (char *) malloc (2 * pagesize); if (!data2) return 1; data2 += (pagesize - ((long int) data2 & (pagesize - 1))) & (pagesize - 1); if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_FIXED, fd, 0L)) return 1; for (i = 0; i < pagesize; ++i) if (*(data + i) != *(data2 + i)) return 1; /* Finally, make sure that changes to the mapped area do not percolate back to the file as seen by read(). (This is a bug on some variants of i386 svr4.0.) */ for (i = 0; i < pagesize; ++i) *(data2 + i) = *(data2 + i) + 1; data3 = (char *) malloc (pagesize); if (!data3) return 1; if (read (fd, data3, pagesize) != pagesize) return 1; for (i = 0; i < pagesize; ++i) if (*(data + i) != *(data3 + i)) return 1; close (fd); return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_mmap_fixed_mapped=yes else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_mmap_fixed_mapped=no fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_mmap_fixed_mapped" >&5 $as_echo "$ac_cv_func_mmap_fixed_mapped" >&6; } if test $ac_cv_func_mmap_fixed_mapped = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_MMAP 1 _ACEOF fi rm -f conftest.mmap { $as_echo "$as_me:$LINENO: checking whether we are using the GNU C Library 2.1 or newer" >&5 $as_echo_n "checking whether we are using the GNU C Library 2.1 or newer... " >&6; } if test "${ac_cv_gnu_library_2_1+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #ifdef __GNU_LIBRARY__ #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2) Lucky GNU user #endif #endif _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "Lucky GNU user" >/dev/null 2>&1; then ac_cv_gnu_library_2_1=yes else ac_cv_gnu_library_2_1=no fi rm -f conftest* fi { $as_echo "$as_me:$LINENO: result: $ac_cv_gnu_library_2_1" >&5 $as_echo "$ac_cv_gnu_library_2_1" >&6; } GLIBC21="$ac_cv_gnu_library_2_1" { $as_echo "$as_me:$LINENO: checking whether integer division by zero raises SIGFPE" >&5 $as_echo_n "checking whether integer division by zero raises SIGFPE... " >&6; } if test "${gt_cv_int_divbyzero_sigfpe+set}" = set; then $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then # Guess based on the CPU. case "$host_cpu" in alpha* | i3456786 | m68k | s390*) gt_cv_int_divbyzero_sigfpe="guessing yes";; *) gt_cv_int_divbyzero_sigfpe="guessing no";; esac else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include static void #ifdef __cplusplus sigfpe_handler (int sig) #else sigfpe_handler (sig) int sig; #endif { /* Exit with code 0 if SIGFPE, with code 1 if any other signal. */ exit (sig != SIGFPE); } int x = 1; int y = 0; int z; int nan; int main () { signal (SIGFPE, sigfpe_handler); /* IRIX and AIX (when "xlc -qcheck" is used) yield signal SIGTRAP. */ #if (defined (__sgi) || defined (_AIX)) && defined (SIGTRAP) signal (SIGTRAP, sigfpe_handler); #endif /* Linux/SPARC yields signal SIGILL. */ #if defined (__sparc__) && defined (__linux__) signal (SIGILL, sigfpe_handler); #endif z = x / y; nan = y / y; exit (1); } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then gt_cv_int_divbyzero_sigfpe=yes else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) gt_cv_int_divbyzero_sigfpe=no fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi { $as_echo "$as_me:$LINENO: result: $gt_cv_int_divbyzero_sigfpe" >&5 $as_echo "$gt_cv_int_divbyzero_sigfpe" >&6; } case "$gt_cv_int_divbyzero_sigfpe" in *yes) value=1;; *) value=0;; esac cat >>confdefs.h <<_ACEOF #define INTDIV0_RAISES_SIGFPE $value _ACEOF { $as_echo "$as_me:$LINENO: checking for inttypes.h" >&5 $as_echo_n "checking for inttypes.h... " >&6; } if test "${jm_ac_cv_header_inttypes_h+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { uintmax_t i = (uintmax_t) -1; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then jm_ac_cv_header_inttypes_h=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 jm_ac_cv_header_inttypes_h=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $jm_ac_cv_header_inttypes_h" >&5 $as_echo "$jm_ac_cv_header_inttypes_h" >&6; } if test $jm_ac_cv_header_inttypes_h = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_INTTYPES_H_WITH_UINTMAX 1 _ACEOF fi { $as_echo "$as_me:$LINENO: checking for stdint.h" >&5 $as_echo_n "checking for stdint.h... " >&6; } if test "${jm_ac_cv_header_stdint_h+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { uintmax_t i = (uintmax_t) -1; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then jm_ac_cv_header_stdint_h=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 jm_ac_cv_header_stdint_h=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $jm_ac_cv_header_stdint_h" >&5 $as_echo "$jm_ac_cv_header_stdint_h" >&6; } if test $jm_ac_cv_header_stdint_h = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_STDINT_H_WITH_UINTMAX 1 _ACEOF fi { $as_echo "$as_me:$LINENO: checking for unsigned long long" >&5 $as_echo_n "checking for unsigned long long... " >&6; } if test "${ac_cv_type_unsigned_long_long+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ unsigned long long ull = 1; int i = 63; int main () { unsigned long long ullmax = (unsigned long long) -1; return ull << i | ull >> i | ullmax / ull | ullmax % ull; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_type_unsigned_long_long=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_unsigned_long_long=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_type_unsigned_long_long" >&5 $as_echo "$ac_cv_type_unsigned_long_long" >&6; } if test $ac_cv_type_unsigned_long_long = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_UNSIGNED_LONG_LONG 1 _ACEOF fi if test $jm_ac_cv_header_inttypes_h = no && test $jm_ac_cv_header_stdint_h = no; then test $ac_cv_type_unsigned_long_long = yes \ && ac_type='unsigned long long' \ || ac_type='unsigned long' cat >>confdefs.h <<_ACEOF #define uintmax_t $ac_type _ACEOF else cat >>confdefs.h <<\_ACEOF #define HAVE_UINTMAX_T 1 _ACEOF fi { $as_echo "$as_me:$LINENO: checking for inttypes.h" >&5 $as_echo_n "checking for inttypes.h... " >&6; } if test "${gt_cv_header_inttypes_h+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then gt_cv_header_inttypes_h=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gt_cv_header_inttypes_h=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $gt_cv_header_inttypes_h" >&5 $as_echo "$gt_cv_header_inttypes_h" >&6; } if test $gt_cv_header_inttypes_h = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_INTTYPES_H 1 _ACEOF fi if test $gt_cv_header_inttypes_h = yes; then { $as_echo "$as_me:$LINENO: checking whether the inttypes.h PRIxNN macros are broken" >&5 $as_echo_n "checking whether the inttypes.h PRIxNN macros are broken... " >&6; } if test "${gt_cv_inttypes_pri_broken+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #ifdef PRId32 char *p = PRId32; #endif int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then gt_cv_inttypes_pri_broken=no else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gt_cv_inttypes_pri_broken=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $gt_cv_inttypes_pri_broken" >&5 $as_echo "$gt_cv_inttypes_pri_broken" >&6; } fi if test "$gt_cv_inttypes_pri_broken" = yes; then cat >>confdefs.h <<_ACEOF #define PRI_MACROS_BROKEN 1 _ACEOF fi if test "X$prefix" = "XNONE"; then acl_final_prefix="$ac_default_prefix" else acl_final_prefix="$prefix" fi if test "X$exec_prefix" = "XNONE"; then acl_final_exec_prefix='${prefix}' else acl_final_exec_prefix="$exec_prefix" fi acl_save_prefix="$prefix" prefix="$acl_final_prefix" eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" prefix="$acl_save_prefix" # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:$LINENO: checking for ld used by GCC" >&5 $as_echo_n "checking for ld used by GCC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | [A-Za-z]:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if test "${acl_cv_path_LD+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then acl_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else acl_cv_path_LD="$LD" # Let the user override the test with a path. fi fi LD="$acl_cv_path_LD" if test -n "$LD"; then { $as_echo "$as_me:$LINENO: result: $LD" >&5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 $as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} { (exit 1); exit 1; }; } { $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if test "${acl_cv_prog_gnu_ld+set}" = set; then $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then acl_cv_prog_gnu_ld=yes else acl_cv_prog_gnu_ld=no fi fi { $as_echo "$as_me:$LINENO: result: $acl_cv_prog_gnu_ld" >&5 $as_echo "$acl_cv_prog_gnu_ld" >&6; } with_gnu_ld=$acl_cv_prog_gnu_ld { $as_echo "$as_me:$LINENO: checking for shared library run path origin" >&5 $as_echo_n "checking for shared library run path origin... " >&6; } if test "${acl_cv_rpath+set}" = set; then $as_echo_n "(cached) " >&6 else CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh . ./conftest.sh rm -f ./conftest.sh acl_cv_rpath=done fi { $as_echo "$as_me:$LINENO: result: $acl_cv_rpath" >&5 $as_echo "$acl_cv_rpath" >&6; } wl="$acl_cv_wl" libext="$acl_cv_libext" shlibext="$acl_cv_shlibext" hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" hardcode_direct="$acl_cv_hardcode_direct" hardcode_minus_L="$acl_cv_hardcode_minus_L" # Check whether --enable-rpath was given. if test "${enable_rpath+set}" = set; then enableval=$enable_rpath; : else enable_rpath=yes fi use_additional=yes acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" # Check whether --with-libiconv-prefix was given. if test "${with_libiconv_prefix+set}" = set; then withval=$with_libiconv_prefix; if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" else additional_includedir="$withval/include" additional_libdir="$withval/lib" fi fi fi LIBICONV= LTLIBICONV= INCICONV= rpathdirs= ltrpathdirs= names_already_handled= names_next_round='iconv ' while test -n "$names_next_round"; do names_this_round="$names_next_round" names_next_round= for name in $names_this_round; do already_handled= for n in $names_already_handled; do if test "$n" = "$name"; then already_handled=yes break fi done if test -z "$already_handled"; then names_already_handled="$names_already_handled $name" uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` eval value=\"\$HAVE_LIB$uppername\" if test -n "$value"; then if test "$value" = yes; then eval value=\"\$LIB$uppername\" test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value" eval value=\"\$LTLIB$uppername\" test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value" else : fi else found_dir= found_la= found_so= found_a= if test $use_additional = yes; then if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then found_dir="$additional_libdir" found_so="$additional_libdir/lib$name.$shlibext" if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi else if test -f "$additional_libdir/lib$name.$libext"; then found_dir="$additional_libdir" found_a="$additional_libdir/lib$name.$libext" if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi fi fi fi if test "X$found_dir" = "X"; then for x in $LDFLAGS $LTLIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" case "$x" in -L*) dir=`echo "X$x" | sed -e 's/^X-L//'` if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then found_dir="$dir" found_so="$dir/lib$name.$shlibext" if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi else if test -f "$dir/lib$name.$libext"; then found_dir="$dir" found_a="$dir/lib$name.$libext" if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi fi fi ;; esac if test "X$found_dir" != "X"; then break fi done fi if test "X$found_dir" != "X"; then LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name" if test "X$found_so" != "X"; then if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" else haveit= for x in $ltrpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $found_dir" fi if test "$hardcode_direct" = yes; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" else if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" haveit= for x in $rpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $found_dir" fi else haveit= for x in $LDFLAGS $LIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir" fi if test "$hardcode_minus_L" != no; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" else LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" fi fi fi fi else if test "X$found_a" != "X"; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a" else LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name" fi fi additional_includedir= case "$found_dir" in */lib | */lib/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` additional_includedir="$basedir/include" ;; esac if test "X$additional_includedir" != "X"; then if test "X$additional_includedir" != "X/usr/include"; then haveit= if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; esac fi fi if test -z "$haveit"; then for x in $CPPFLAGS $INCICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_includedir"; then INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir" fi fi fi fi fi if test -n "$found_la"; then save_libdir="$libdir" case "$found_la" in */* | *\\*) . "$found_la" ;; *) . "./$found_la" ;; esac libdir="$save_libdir" for dep in $dependency_libs; do case "$dep" in -L*) additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` if test "X$additional_libdir" != "X/usr/lib"; then haveit= if test "X$additional_libdir" = "X/usr/local/lib"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; esac fi fi if test -z "$haveit"; then haveit= for x in $LDFLAGS $LIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir" fi fi haveit= for x in $LDFLAGS $LTLIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir" fi fi fi fi ;; -R*) dir=`echo "X$dep" | sed -e 's/^X-R//'` if test "$enable_rpath" != no; then haveit= for x in $rpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $dir" fi haveit= for x in $ltrpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $dir" fi fi ;; -l*) names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ;; *.la) names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ;; *) LIBICONV="${LIBICONV}${LIBICONV:+ }$dep" LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep" ;; esac done fi else LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name" fi fi fi done done if test "X$rpathdirs" != "X"; then if test -n "$hardcode_libdir_separator"; then alldirs= for found_dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" done acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" else for found_dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$found_dir" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" done fi fi if test "X$ltrpathdirs" != "X"; then for found_dir in $ltrpathdirs; do LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir" done fi for ac_header in argz.h limits.h locale.h nl_types.h malloc.h stddef.h \ stdlib.h string.h unistd.h sys/param.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 $as_echo_n "checking $ac_header usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 $as_echo_n "checking $ac_header presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ;; esac { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi as_val=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_func in feof_unlocked fgets_unlocked getc_unlocked getcwd getegid \ geteuid getgid getuid mempcpy munmap putenv setenv setlocale stpcpy \ strcasecmp strdup strtoul tsearch __argz_count __argz_stringify __argz_next \ __fsetlocking do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } as_val=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done am_save_CPPFLAGS="$CPPFLAGS" for element in $INCICONV; do haveit= for x in $CPPFLAGS; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X$element"; then haveit=yes break fi done if test -z "$haveit"; then CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" fi done { $as_echo "$as_me:$LINENO: checking for iconv" >&5 $as_echo_n "checking for iconv... " >&6; } if test "${am_cv_func_iconv+set}" = set; then $as_echo_n "(cached) " >&6 else am_cv_func_iconv="no, consider installing GNU libiconv" am_cv_lib_iconv=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then am_cv_func_iconv=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test "$am_cv_func_iconv" != yes; then am_save_LIBS="$LIBS" LIBS="$LIBS $LIBICONV" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then am_cv_lib_iconv=yes am_cv_func_iconv=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS="$am_save_LIBS" fi fi { $as_echo "$as_me:$LINENO: result: $am_cv_func_iconv" >&5 $as_echo "$am_cv_func_iconv" >&6; } if test "$am_cv_func_iconv" = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_ICONV 1 _ACEOF fi if test "$am_cv_lib_iconv" = yes; then { $as_echo "$as_me:$LINENO: checking how to link with libiconv" >&5 $as_echo_n "checking how to link with libiconv... " >&6; } { $as_echo "$as_me:$LINENO: result: $LIBICONV" >&5 $as_echo "$LIBICONV" >&6; } else CPPFLAGS="$am_save_CPPFLAGS" LIBICONV= LTLIBICONV= fi if test "$am_cv_func_iconv" = yes; then { $as_echo "$as_me:$LINENO: checking for iconv declaration" >&5 $as_echo_n "checking for iconv declaration... " >&6; } if test "${am_cv_proto_iconv+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include extern #ifdef __cplusplus "C" #endif #if defined(__STDC__) || defined(__cplusplus) size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); #else size_t iconv(); #endif int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then am_cv_proto_iconv_arg1="" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 am_cv_proto_iconv_arg1="const" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);" fi am_cv_proto_iconv=`echo "$am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` { $as_echo "$as_me:$LINENO: result: ${ac_t:- }$am_cv_proto_iconv" >&5 $as_echo "${ac_t:- }$am_cv_proto_iconv" >&6; } cat >>confdefs.h <<_ACEOF #define ICONV_CONST $am_cv_proto_iconv_arg1 _ACEOF fi { $as_echo "$as_me:$LINENO: checking for nl_langinfo and CODESET" >&5 $as_echo_n "checking for nl_langinfo and CODESET... " >&6; } if test "${am_cv_langinfo_codeset+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { char* cs = nl_langinfo(CODESET); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then am_cv_langinfo_codeset=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 am_cv_langinfo_codeset=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $am_cv_langinfo_codeset" >&5 $as_echo "$am_cv_langinfo_codeset" >&6; } if test $am_cv_langinfo_codeset = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_LANGINFO_CODESET 1 _ACEOF fi if test $ac_cv_header_locale_h = yes; then { $as_echo "$as_me:$LINENO: checking for LC_MESSAGES" >&5 $as_echo_n "checking for LC_MESSAGES... " >&6; } if test "${am_cv_val_LC_MESSAGES+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { return LC_MESSAGES ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then am_cv_val_LC_MESSAGES=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 am_cv_val_LC_MESSAGES=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $am_cv_val_LC_MESSAGES" >&5 $as_echo "$am_cv_val_LC_MESSAGES" >&6; } if test $am_cv_val_LC_MESSAGES = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_LC_MESSAGES 1 _ACEOF fi fi for ac_prog in bison do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_INTLBISON+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$INTLBISON"; then ac_cv_prog_INTLBISON="$INTLBISON" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_INTLBISON="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi INTLBISON=$ac_cv_prog_INTLBISON if test -n "$INTLBISON"; then { $as_echo "$as_me:$LINENO: result: $INTLBISON" >&5 $as_echo "$INTLBISON" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$INTLBISON" && break done if test -z "$INTLBISON"; then ac_verc_fail=yes else { $as_echo "$as_me:$LINENO: checking version of bison" >&5 $as_echo_n "checking version of bison... " >&6; } ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'` case $ac_prog_version in '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;; 1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*) ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;; *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;; esac { $as_echo "$as_me:$LINENO: result: $ac_prog_version" >&5 $as_echo "$ac_prog_version" >&6; } fi if test $ac_verc_fail = yes; then INTLBISON=: fi { $as_echo "$as_me:$LINENO: checking whether NLS is requested" >&5 $as_echo_n "checking whether NLS is requested... " >&6; } # Check whether --enable-nls was given. if test "${enable_nls+set}" = set; then enableval=$enable_nls; USE_NLS=$enableval else USE_NLS=yes fi { $as_echo "$as_me:$LINENO: result: $USE_NLS" >&5 $as_echo "$USE_NLS" >&6; } BUILD_INCLUDED_LIBINTL=no USE_INCLUDED_LIBINTL=no LIBINTL= LTLIBINTL= POSUB= if test "$USE_NLS" = "yes"; then gt_use_preinstalled_gnugettext=no { $as_echo "$as_me:$LINENO: checking whether included gettext is requested" >&5 $as_echo_n "checking whether included gettext is requested... " >&6; } # Check whether --with-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval=$with_included_gettext; nls_cv_force_use_gnu_gettext=$withval else nls_cv_force_use_gnu_gettext=no fi { $as_echo "$as_me:$LINENO: result: $nls_cv_force_use_gnu_gettext" >&5 $as_echo "$nls_cv_force_use_gnu_gettext" >&6; } nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" if test "$nls_cv_force_use_gnu_gettext" != "yes"; then { $as_echo "$as_me:$LINENO: checking for GNU gettext in libc" >&5 $as_echo_n "checking for GNU gettext in libc... " >&6; } if test "${gt_cv_func_gnugettext1_libc+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include extern int _nl_msg_cat_cntr; extern int *_nl_domain_bindings; int main () { bindtextdomain ("", ""); return (int) gettext ("") + _nl_msg_cat_cntr + *_nl_domain_bindings ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then gt_cv_func_gnugettext1_libc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gt_cv_func_gnugettext1_libc=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $gt_cv_func_gnugettext1_libc" >&5 $as_echo "$gt_cv_func_gnugettext1_libc" >&6; } if test "$gt_cv_func_gnugettext1_libc" != "yes"; then use_additional=yes acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" # Check whether --with-libintl-prefix was given. if test "${with_libintl_prefix+set}" = set; then withval=$with_libintl_prefix; if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" else additional_includedir="$withval/include" additional_libdir="$withval/lib" fi fi fi LIBINTL= LTLIBINTL= INCINTL= rpathdirs= ltrpathdirs= names_already_handled= names_next_round='intl ' while test -n "$names_next_round"; do names_this_round="$names_next_round" names_next_round= for name in $names_this_round; do already_handled= for n in $names_already_handled; do if test "$n" = "$name"; then already_handled=yes break fi done if test -z "$already_handled"; then names_already_handled="$names_already_handled $name" uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` eval value=\"\$HAVE_LIB$uppername\" if test -n "$value"; then if test "$value" = yes; then eval value=\"\$LIB$uppername\" test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value" eval value=\"\$LTLIB$uppername\" test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value" else : fi else found_dir= found_la= found_so= found_a= if test $use_additional = yes; then if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then found_dir="$additional_libdir" found_so="$additional_libdir/lib$name.$shlibext" if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi else if test -f "$additional_libdir/lib$name.$libext"; then found_dir="$additional_libdir" found_a="$additional_libdir/lib$name.$libext" if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi fi fi fi if test "X$found_dir" = "X"; then for x in $LDFLAGS $LTLIBINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" case "$x" in -L*) dir=`echo "X$x" | sed -e 's/^X-L//'` if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then found_dir="$dir" found_so="$dir/lib$name.$shlibext" if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi else if test -f "$dir/lib$name.$libext"; then found_dir="$dir" found_a="$dir/lib$name.$libext" if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi fi fi ;; esac if test "X$found_dir" != "X"; then break fi done fi if test "X$found_dir" != "X"; then LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name" if test "X$found_so" != "X"; then if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" else haveit= for x in $ltrpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $found_dir" fi if test "$hardcode_direct" = yes; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" else if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" haveit= for x in $rpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $found_dir" fi else haveit= for x in $LDFLAGS $LIBINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir" fi if test "$hardcode_minus_L" != no; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" else LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" fi fi fi fi else if test "X$found_a" != "X"; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a" else LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name" fi fi additional_includedir= case "$found_dir" in */lib | */lib/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` additional_includedir="$basedir/include" ;; esac if test "X$additional_includedir" != "X"; then if test "X$additional_includedir" != "X/usr/include"; then haveit= if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; esac fi fi if test -z "$haveit"; then for x in $CPPFLAGS $INCINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_includedir"; then INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir" fi fi fi fi fi if test -n "$found_la"; then save_libdir="$libdir" case "$found_la" in */* | *\\*) . "$found_la" ;; *) . "./$found_la" ;; esac libdir="$save_libdir" for dep in $dependency_libs; do case "$dep" in -L*) additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` if test "X$additional_libdir" != "X/usr/lib"; then haveit= if test "X$additional_libdir" = "X/usr/local/lib"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; esac fi fi if test -z "$haveit"; then haveit= for x in $LDFLAGS $LIBINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir" fi fi haveit= for x in $LDFLAGS $LTLIBINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir" fi fi fi fi ;; -R*) dir=`echo "X$dep" | sed -e 's/^X-R//'` if test "$enable_rpath" != no; then haveit= for x in $rpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $dir" fi haveit= for x in $ltrpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $dir" fi fi ;; -l*) names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ;; *.la) names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ;; *) LIBINTL="${LIBINTL}${LIBINTL:+ }$dep" LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep" ;; esac done fi else LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name" fi fi fi done done if test "X$rpathdirs" != "X"; then if test -n "$hardcode_libdir_separator"; then alldirs= for found_dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" done acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" else for found_dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$found_dir" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" done fi fi if test "X$ltrpathdirs" != "X"; then for found_dir in $ltrpathdirs; do LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir" done fi { $as_echo "$as_me:$LINENO: checking for GNU gettext in libintl" >&5 $as_echo_n "checking for GNU gettext in libintl... " >&6; } if test "${gt_cv_func_gnugettext1_libintl+set}" = set; then $as_echo_n "(cached) " >&6 else gt_save_CPPFLAGS="$CPPFLAGS" CPPFLAGS="$CPPFLAGS $INCINTL" gt_save_LIBS="$LIBS" LIBS="$LIBS $LIBINTL" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include extern int _nl_msg_cat_cntr; extern #ifdef __cplusplus "C" #endif const char *_nl_expand_alias (); int main () { bindtextdomain ("", ""); return (int) gettext ("") + _nl_msg_cat_cntr + *_nl_expand_alias (0) ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then gt_cv_func_gnugettext1_libintl=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 gt_cv_func_gnugettext1_libintl=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test "$gt_cv_func_gnugettext1_libintl" != yes && test -n "$LIBICONV"; then LIBS="$LIBS $LIBICONV" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include extern int _nl_msg_cat_cntr; extern #ifdef __cplusplus "C" #endif const char *_nl_expand_alias (); int main () { bindtextdomain ("", ""); return (int) gettext ("") + _nl_msg_cat_cntr + *_nl_expand_alias (0) ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then LIBINTL="$LIBINTL $LIBICONV" LTLIBINTL="$LTLIBINTL $LTLIBICONV" gt_cv_func_gnugettext1_libintl=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi CPPFLAGS="$gt_save_CPPFLAGS" LIBS="$gt_save_LIBS" fi { $as_echo "$as_me:$LINENO: result: $gt_cv_func_gnugettext1_libintl" >&5 $as_echo "$gt_cv_func_gnugettext1_libintl" >&6; } fi if test "$gt_cv_func_gnugettext1_libc" = "yes" \ || { test "$gt_cv_func_gnugettext1_libintl" = "yes" \ && test "$PACKAGE" != gettext-runtime \ && test "$PACKAGE" != gettext-tools; }; then gt_use_preinstalled_gnugettext=yes else LIBINTL= LTLIBINTL= INCINTL= fi if test "$gt_use_preinstalled_gnugettext" != "yes"; then nls_cv_use_gnu_gettext=yes fi fi if test "$nls_cv_use_gnu_gettext" = "yes"; then BUILD_INCLUDED_LIBINTL=yes USE_INCLUDED_LIBINTL=yes LIBINTL="\${top_builddir}/intl/libintl.a $LIBICONV" LTLIBINTL="\${top_builddir}/intl/libintl.a $LTLIBICONV" LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` fi if test "$gt_use_preinstalled_gnugettext" = "yes" \ || test "$nls_cv_use_gnu_gettext" = "yes"; then CATOBJEXT=.gmo fi if test "$gt_use_preinstalled_gnugettext" = "yes" \ || test "$nls_cv_use_gnu_gettext" = "yes"; then cat >>confdefs.h <<\_ACEOF #define ENABLE_NLS 1 _ACEOF else USE_NLS=no fi fi { $as_echo "$as_me:$LINENO: checking whether to use NLS" >&5 $as_echo_n "checking whether to use NLS... " >&6; } { $as_echo "$as_me:$LINENO: result: $USE_NLS" >&5 $as_echo "$USE_NLS" >&6; } if test "$USE_NLS" = "yes"; then { $as_echo "$as_me:$LINENO: checking where the gettext function comes from" >&5 $as_echo_n "checking where the gettext function comes from... " >&6; } if test "$gt_use_preinstalled_gnugettext" = "yes"; then if test "$gt_cv_func_gnugettext1_libintl" = "yes"; then gt_source="external libintl" else gt_source="libc" fi else gt_source="included intl directory" fi { $as_echo "$as_me:$LINENO: result: $gt_source" >&5 $as_echo "$gt_source" >&6; } fi if test "$USE_NLS" = "yes"; then if test "$gt_use_preinstalled_gnugettext" = "yes"; then if test "$gt_cv_func_gnugettext1_libintl" = "yes"; then { $as_echo "$as_me:$LINENO: checking how to link with libintl" >&5 $as_echo_n "checking how to link with libintl... " >&6; } { $as_echo "$as_me:$LINENO: result: $LIBINTL" >&5 $as_echo "$LIBINTL" >&6; } for element in $INCINTL; do haveit= for x in $CPPFLAGS; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X$element"; then haveit=yes break fi done if test -z "$haveit"; then CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" fi done fi cat >>confdefs.h <<\_ACEOF #define HAVE_GETTEXT 1 _ACEOF cat >>confdefs.h <<\_ACEOF #define HAVE_DCGETTEXT 1 _ACEOF fi POSUB=po fi if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then BUILD_INCLUDED_LIBINTL=yes fi nls_cv_header_intl= nls_cv_header_libgt= DATADIRNAME=share INSTOBJEXT=.mo GENCAT=gencat if test "$USE_INCLUDED_LIBINTL" = yes; then INTLOBJS="\$(GETTOBJS)" fi INTL_LIBTOOL_SUFFIX_PREFIX= INTLLIBS="$LIBINTL" am_save_CPPFLAGS="$CPPFLAGS" for element in $INCICONV; do haveit= for x in $CPPFLAGS; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X$element"; then haveit=yes break fi done if test -z "$haveit"; then CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" fi done { $as_echo "$as_me:$LINENO: checking for iconv" >&5 $as_echo_n "checking for iconv... " >&6; } if test "${am_cv_func_iconv+set}" = set; then $as_echo_n "(cached) " >&6 else am_cv_func_iconv="no, consider installing GNU libiconv" am_cv_lib_iconv=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then am_cv_func_iconv=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test "$am_cv_func_iconv" != yes; then am_save_LIBS="$LIBS" LIBS="$LIBS $LIBICONV" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then am_cv_lib_iconv=yes am_cv_func_iconv=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS="$am_save_LIBS" fi fi { $as_echo "$as_me:$LINENO: result: $am_cv_func_iconv" >&5 $as_echo "$am_cv_func_iconv" >&6; } if test "$am_cv_func_iconv" = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_ICONV 1 _ACEOF fi if test "$am_cv_lib_iconv" = yes; then { $as_echo "$as_me:$LINENO: checking how to link with libiconv" >&5 $as_echo_n "checking how to link with libiconv... " >&6; } { $as_echo "$as_me:$LINENO: result: $LIBICONV" >&5 $as_echo "$LIBICONV" >&6; } else CPPFLAGS="$am_save_CPPFLAGS" LIBICONV= LTLIBICONV= fi if test "$am_cv_func_iconv" = yes; then { $as_echo "$as_me:$LINENO: checking for iconv declaration" >&5 $as_echo_n "checking for iconv declaration... " >&6; } if test "${am_cv_proto_iconv+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include extern #ifdef __cplusplus "C" #endif #if defined(__STDC__) || defined(__cplusplus) size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); #else size_t iconv(); #endif int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then am_cv_proto_iconv_arg1="" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 am_cv_proto_iconv_arg1="const" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);" fi am_cv_proto_iconv=`echo "$am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` { $as_echo "$as_me:$LINENO: result: ${ac_t:- }$am_cv_proto_iconv" >&5 $as_echo "${ac_t:- }$am_cv_proto_iconv" >&6; } cat >>confdefs.h <<_ACEOF #define ICONV_CONST $am_cv_proto_iconv_arg1 _ACEOF fi if test "x$am_cv_func_iconv" != "xyes"; then { { $as_echo "$as_me:$LINENO: error: Unable to find iconv(). iconv() is needed for Kasumi" >&5 $as_echo "$as_me: error: Unable to find iconv(). iconv() is needed for Kasumi" >&2;} { (exit 1); exit 1; }; } fi # Check whether --enable-gtktest was given. if test "${enable_gtktest+set}" = set; then enableval=$enable_gtktest; else enable_gtktest=yes fi pkg_config_args=gtk+-2.0 for module in . do case "$module" in gthread) pkg_config_args="$pkg_config_args gthread-2.0" ;; esac done no_gtk="" # Extract the first word of "pkg-config", so it can be a program name with args. set dummy pkg-config; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_PKG_CONFIG+set}" = set; then $as_echo_n "(cached) " >&6 else case $PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no" ;; esac fi PKG_CONFIG=$ac_cv_path_PKG_CONFIG if test -n "$PKG_CONFIG"; then { $as_echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 $as_echo "$PKG_CONFIG" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test x$PKG_CONFIG != xno ; then if pkg-config --atleast-pkgconfig-version 0.7 ; then : else echo "*** pkg-config too old; version 0.7 or better required." no_gtk=yes PKG_CONFIG=no fi else no_gtk=yes fi min_gtk_version=2.6.0 { $as_echo "$as_me:$LINENO: checking for GTK+ - version >= $min_gtk_version" >&5 $as_echo_n "checking for GTK+ - version >= $min_gtk_version... " >&6; } if test x$PKG_CONFIG != xno ; then ## don't try to run the test against uninstalled libtool libs if $PKG_CONFIG --uninstalled $pkg_config_args; then echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH" enable_gtktest=no fi if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then : else no_gtk=yes fi fi if test x"$no_gtk" = x ; then GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags` GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs` gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'` gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'` gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'` if test "x$enable_gtktest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$GTK_LIBS $LIBS" rm -f conf.gtktest if test "$cross_compiling" = yes; then echo $ac_n "cross compiling; assumed OK... $ac_c" else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include int main () { int major, minor, micro; char *tmp_version; system ("touch conf.gtktest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_gtk_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_gtk_version"); exit(1); } if ((gtk_major_version != $gtk_config_major_version) || (gtk_minor_version != $gtk_config_minor_version) || (gtk_micro_version != $gtk_config_micro_version)) { printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version, gtk_major_version, gtk_minor_version, gtk_micro_version); printf ("*** was found! If pkg-config was correct, then it is best\n"); printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n"); printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); printf("*** required on your system.\n"); printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n"); printf("*** to point to the correct configuration files\n"); } else if ((gtk_major_version != GTK_MAJOR_VERSION) || (gtk_minor_version != GTK_MINOR_VERSION) || (gtk_micro_version != GTK_MICRO_VERSION)) { printf("*** GTK+ header files (version %d.%d.%d) do not match\n", GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION); printf("*** library (version %d.%d.%d)\n", gtk_major_version, gtk_minor_version, gtk_micro_version); } else { if ((gtk_major_version > major) || ((gtk_major_version == major) && (gtk_minor_version > minor)) || ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro))) { return 0; } else { printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n", gtk_major_version, gtk_minor_version, gtk_micro_version); printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n", major, minor, micro); printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n"); printf("***\n"); printf("*** If you have already installed a sufficiently new version, this error\n"); printf("*** probably means that the wrong copy of the pkg-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n"); printf("*** correct copy of pkg-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); } } return 1; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) no_gtk=yes fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_gtk" = x ; then { $as_echo "$as_me:$LINENO: result: yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)" >&5 $as_echo "yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)" >&6; } CFLAGS="$CFLAGS $GTK_CFLAGS" CPPFLAGS="$CPPFLAGS $GTK_CFLAGS" LIBS="$LIBS $GTK_LIBS" else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } if test "$PKG_CONFIG" = "no" ; then echo "*** A new enough version of pkg-config was not found." echo "*** See http://pkgconfig.sourceforge.net" else if test -f conf.gtktest ; then : else echo "*** Could not run GTK+ test program, checking why..." ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$LIBS $GTK_LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GTK+ or finding the wrong" echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means GTK+ is incorrectly installed." fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi GTK_CFLAGS="" GTK_LIBS="" { { $as_echo "$as_me:$LINENO: error: GTK+ >= 2.6.0 not found." >&5 $as_echo "$as_me: error: GTK+ >= 2.6.0 not found." >&2;} { (exit 1); exit 1; }; } fi rm -f conf.gtktest { $as_echo "$as_me:$LINENO: checking for iconv in -liconv" >&5 $as_echo_n "checking for iconv in -liconv... " >&6; } if test "${ac_cv_lib_iconv_iconv+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-liconv $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char iconv (); int main () { return iconv (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_iconv_iconv=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_iconv_iconv=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_iconv_iconv" >&5 $as_echo "$ac_cv_lib_iconv_iconv" >&6; } if test "x$ac_cv_lib_iconv_iconv" = x""yes; then cat >>confdefs.h <<_ACEOF #define HAVE_LIBICONV 1 _ACEOF LIBS="-liconv $LIBS" fi { $as_echo "$as_me:$LINENO: checking for anthy_dic_util_init in -lanthydic" >&5 $as_echo_n "checking for anthy_dic_util_init in -lanthydic... " >&6; } if test "${ac_cv_lib_anthydic_anthy_dic_util_init+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lanthydic $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char anthy_dic_util_init (); int main () { return anthy_dic_util_init (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_anthydic_anthy_dic_util_init=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_anthydic_anthy_dic_util_init=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_anthydic_anthy_dic_util_init" >&5 $as_echo "$ac_cv_lib_anthydic_anthy_dic_util_init" >&6; } if test "x$ac_cv_lib_anthydic_anthy_dic_util_init" = x""yes; then cat >>confdefs.h <<_ACEOF #define HAVE_LIBANTHYDIC 1 _ACEOF LIBS="-lanthydic $LIBS" fi { $as_echo "$as_me:$LINENO: checking for anthy_get_version_string in -lanthy" >&5 $as_echo_n "checking for anthy_get_version_string in -lanthy... " >&6; } if test "${ac_cv_lib_anthy_anthy_get_version_string+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lanthy $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char anthy_get_version_string (); int main () { return anthy_get_version_string (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_anthy_anthy_get_version_string=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_anthy_anthy_get_version_string=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_anthy_anthy_get_version_string" >&5 $as_echo "$ac_cv_lib_anthy_anthy_get_version_string" >&6; } if test "x$ac_cv_lib_anthy_anthy_get_version_string" = x""yes; then cat >>confdefs.h <<_ACEOF #define HAVE_LIBANTHY 1 _ACEOF LIBS="-lanthy $LIBS" fi CFLAGS="$CFLAGS -Wall" CXXFLAGS="$CXXFLAGS -Wall" ac_config_files="$ac_config_files kasumi.desktop" ac_config_files="$ac_config_files Makefile intl/Makefile po/Makefile.in m4/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) $as_unset $ac_var ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then test "x$cache_file" != "x/dev/null" && { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} cat confcache >$cache_file else { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi : ${CONFIG_STATUS=./config.status} ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi # PATH needs CR # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 { (exit 1); exit 1; } fi # Work around bugs in pre-3.0 UWIN ksh. for as_var in ENV MAIL MAILPATH do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # CDPATH. $as_unset CDPATH as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line after each line using $LINENO; the second 'sed' # does the real work. The second script uses 'N' to pair each # line-number line with the line containing $LINENO, and appends # trailing '-' during substitution so that $LINENO is not a special # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # scripts with optimization help from Paolo Bonzini. Blame Lee # E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in -n*) case `echo 'x\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. *) ECHO_C='\c';; esac;; *) ECHO_N='-n';; esac if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 # Save the log message, to keep $[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by main.cxx $as_me 2.0, which was generated by GNU Autoconf 2.63. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. Usage: $0 [OPTION]... [FILE]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_version="\\ main.cxx config.status 2.0 configured by $0, generated by GNU Autoconf 2.63, with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" Copyright (C) 2008 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header { $as_echo "$as_me: error: ambiguous option: $1 Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; };; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) { $as_echo "$as_me: error: unrecognized option: $1 Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *) ac_config_targets="$ac_config_targets $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" # Capture the value of obsolete ALL_LINGUAS because we need it to compute # POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES, CATALOGS. But hide it # from automake. eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' # Capture the value of LINGUAS because we need it to compute CATALOGS. LINGUAS="${LINGUAS-%UNSET%}" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; "kasumi.desktop") CONFIG_FILES="$CONFIG_FILES kasumi.desktop" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "intl/Makefile") CONFIG_FILES="$CONFIG_FILES intl/Makefile" ;; "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; "m4/Makefile") CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;; *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 $as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= trap 'exit_status=$? { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || { $as_echo "$as_me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=' ' ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 $as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 $as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 $as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\).*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\).*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 $as_echo "$as_me: error: could not setup config files machinery" >&2;} { (exit 1); exit 1; }; } _ACEOF # VPATH may cause trouble with some makes, so we remove $(srcdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/ s/:*\${srcdir}:*/:/ s/:*@srcdir@:*/:/ s/^\([^=]*=[ ]*\):*/\1/ s/:*$// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_t=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_t"; then break elif $ac_last_try; then { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 $as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} { (exit 1); exit 1; }; } else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 $as_echo "$as_me: error: could not setup config headers machinery" >&2;} { (exit 1); exit 1; }; } fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 $as_echo "$as_me: error: invalid tag $ac_tag" >&2;} { (exit 1); exit 1; }; };; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 $as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} { (exit 1); exit 1; }; };; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac ac_file_inputs="$ac_file_inputs '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$tmp/stdin" \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` { as_dir="$ac_dir" case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 $as_echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p ' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&2;} rm -f "$tmp/stdin" case $ac_file in -) cat "$tmp/out" && rm -f "$tmp/out";; *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; esac \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" } >"$tmp/config.h" \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$tmp/config.h" "$ac_file" \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 $as_echo "$as_me: error: could not create -" >&2;} { (exit 1); exit 1; }; } fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { # Autoconf 2.62 quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` { as_dir=$dirpart/$fdir case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 $as_echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ;; "default-1":C) for ac_file in $CONFIG_FILES; do # Support "outfile[:infile[:infile...]]" case "$ac_file" in *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; esac # PO directories have a Makefile.in generated from Makefile.in.in. case "$ac_file" in */Makefile.in) # Adjust a relative srcdir. ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` # In autoconf-2.13 it is called $ac_given_srcdir. # In autoconf-2.50 it is called $srcdir. test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" case "$ac_given_srcdir" in .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; /*) top_srcdir="$ac_given_srcdir" ;; *) top_srcdir="$ac_dots$ac_given_srcdir" ;; esac if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then rm -f "$ac_dir/POTFILES" test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" POMAKEFILEDEPS="POTFILES.in" # ALL_LINGUAS, POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES depend # on $ac_dir but don't depend on user-specified configuration # parameters. if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then # The LINGUAS file contains the set of available languages. if test -n "$OBSOLETE_ALL_LINGUAS"; then test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" fi ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"` # Hide the ALL_LINGUAS assigment from automake. eval 'ALL_LINGUAS''=$ALL_LINGUAS_' POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" else # The set of available languages was given in configure.in. eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' fi case "$ac_given_srcdir" in .) srcdirpre= ;; *) srcdirpre='$(srcdir)/' ;; esac POFILES= GMOFILES= UPDATEPOFILES= DUMMYPOFILES= for lang in $ALL_LINGUAS; do POFILES="$POFILES $srcdirpre$lang.po" GMOFILES="$GMOFILES $srcdirpre$lang.gmo" UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" DUMMYPOFILES="$DUMMYPOFILES $lang.nop" done # CATALOGS depends on both $ac_dir and the user's LINGUAS # environment variable. INST_LINGUAS= if test -n "$ALL_LINGUAS"; then for presentlang in $ALL_LINGUAS; do useit=no if test "%UNSET%" != "$LINGUAS"; then desiredlanguages="$LINGUAS" else desiredlanguages="$ALL_LINGUAS" fi for desiredlang in $desiredlanguages; do # Use the presentlang catalog if desiredlang is # a. equal to presentlang, or # b. a variant of presentlang (because in this case, # presentlang can be used as a fallback for messages # which are not translated in the desiredlang catalog). case "$desiredlang" in "$presentlang"*) useit=yes;; esac done if test $useit = yes; then INST_LINGUAS="$INST_LINGUAS $presentlang" fi done fi CATALOGS= if test -n "$INST_LINGUAS"; then for lang in $INST_LINGUAS; do CATALOGS="$CATALOGS $lang.gmo" done fi test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do if test -f "$f"; then case "$f" in *.orig | *.bak | *~) ;; *) cat "$f" >> "$ac_dir/Makefile" ;; esac fi done fi ;; esac done ;; esac done # for ac_tag { (exit 0); exit 0; } _ACEOF chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 $as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || { (exit 1); exit 1; } fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi kasumi-2.5/KasumiDic.cxx0000644000175000017500000001654610711644443012207 00000000000000/********************************************************************* * * KasumiDic.cxx * * Kasumi - a management tool for a private dictionary of anthy * * Copyright (C) 2004-2006 Takashi Nakamoto * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. * *********************************************************************/ #include "KasumiDic.hxx" #include "KasumiWord.hxx" #include "KasumiString.hxx" #include "KasumiException.hxx" #include "KasumiConfiguration.hxx" extern "C"{ // ad-hoc solution for a defect of Anthy #include } #include #include #include #include #include #include #include #include #include using namespace std; #define OptionOutput( Word, OptionName ) (string(OptionName) + " = " + (Word->getOption(OptionName) ? "y" : "n")) #define BUFFER_SIZE (255) KasumiDic::KasumiDic(KasumiConfiguration *conf) throw(KasumiException){ try{ load(conf); }catch(KasumiException e){ throw e; } } KasumiDic::~KasumiDic() { list::iterator p; while(!mWordList.empty()) { p = mWordList.begin(); mWordList.pop_front(); delete (*p); } } void KasumiDic::load(KasumiConfiguration *conf) throw(KasumiException){ const int FREQ_LBOUND = conf->getPropertyValueByInt("MinFrequency"); const int FREQ_UBOUND = conf->getPropertyValueByInt("MaxFrequency"); int anthy_version = atoi(anthy_get_version_string()); assert(anthy_version != 0); try{ if(anthy_priv_dic_select_first_entry() == -1){ // no word return; } else if(anthy_priv_dic_select_first_entry() == -3) { if(anthy_version >= 7716) { // do not throw exception in the case that this doesn't fail to // read the private dictionary but the dictionary containes // no word. This case happens if the version of anthy is less // than 7714. string message = string("Failed to read private dictionary. This problem might be a problem of Anthy.\n"); throw KasumiException(message, STDERR, KILL); } } char sound[BUFFER_SIZE], wt[BUFFER_SIZE], spelling[BUFFER_SIZE]; int freq; do{ if (anthy_priv_dic_get_index(sound, BUFFER_SIZE) && anthy_priv_dic_get_wtype(wt, BUFFER_SIZE) && anthy_priv_dic_get_word(spelling, BUFFER_SIZE)) { freq = anthy_priv_dic_get_freq(); // corret frequency value crossing the bounds if(FREQ_LBOUND > freq) freq = FREQ_LBOUND; if(FREQ_UBOUND < freq) freq = FREQ_UBOUND; KasumiWord *newWord = KasumiWord::createNewWord(conf); newWord->setSound(string(sound)); if (anthy_version < 7710 && spelling[0] == ' ') { // Measures against a defect of anthy. // "anthy_priv_dic_get_word()" function returns // a string whose first character is an unwated // white space. newWord->setSpelling(string(spelling+1)); } else newWord->setSpelling(string(spelling)); newWord->setFrequency(freq); newWord->setWordType(KasumiWordType::getWordTypeFromCannaTab(string(wt))); appendWord(newWord); } }while(anthy_priv_dic_select_next_entry() == 0); }catch(KasumiException e){ throw e; } } void KasumiDic::appendWord(KasumiWord *word){ // check duplication list::iterator p = mWordList.begin(); while(p != mWordList.end() ) { if((*p)->getID() == word->getID()) return; // nothing to do p++; } word->registerEventListener(this); mWordList.push_back(word); // raise event for(size_t i=0;iappendedWord(word); } } void KasumiDic::removeWord(unsigned int id) { int flag = 0; list::iterator p = mWordList.begin(); while(p != mWordList.end() ) { if((*p)->getID() == id) { mWordList.erase(p); (*p)->removeEventListener(this); free(*p); flag = 1; break; } p++; } // raise event if(flag) for(size_t i=0;iremovedWord(id); } } void KasumiDic::store() throw(KasumiException) { list::iterator p = mWordList.begin(); anthy_priv_dic_delete(); while( p != mWordList.end() ) { string spelling = (*p)->getSpelling(); string sound = (*p)->getSound(); string wt = (*p)->getWordType()->getCannaTab(); int freq = (*p)->getFrequency(); int ret = anthy_priv_dic_add_entry(sound.c_str(), spelling.c_str(), wt.c_str(), freq); if (ret == -1) { throw KasumiException(string("Failed to register") + sound, ERR_DIALOG, KILL); } p++; } } void KasumiDic::registerEventListener(KasumiDicEventListener *listener){ int i,size; size = EventListeners.size(); // if the listener have been already registered, nothing to do // assuring no duplication for(i=0;i::iterator i; KasumiDicEventListener *p; for(i=EventListeners.begin();i!=EventListeners.end();i++){ p = *i; if(p == listener){ EventListeners.erase(i); return; } } } void KasumiDic::changedFrequency(KasumiWord *word) { for(size_t i=0;imodifiedWord(word); } } void KasumiDic::changedSpelling(KasumiWord *word) { for(size_t i=0;imodifiedWord(word); } } void KasumiDic::changedSound(KasumiWord *word) { for(size_t i=0;imodifiedWord(word); } } void KasumiDic::changedWordType(KasumiWord *word) { for(size_t i=0;imodifiedWord(word); } } /* // for debug // // % g++ -g KasumiDic.cxx KasumiWord.cxx KasumiException.cxx KasumiConfiguration.cxx KasumiWordType.cxx KasumiString.cxx `pkg-config --libs --cflags anthy gtk+-2.0` void output(KasumiDic *dic) { list::iterator p = dic->firstWordIter(); while(p != dic->endWordIter()){ cout << (*p)->getID() << " " << (*p)->getSpelling() << endl; p++; } } int main(int argc, char *argv[]) { anthy_dic_util_init(); KasumiWordType::initWordTypeList(); KasumiConfiguration *conf = new KasumiConfiguration(argc, argv); KasumiDic *dic = new KasumiDic(conf); KasumiWord *word = KasumiWord::createNewWord(conf); word->setSpellingByUTF8("テスト"); word->setSoundByUTF8("てすと"); dic->appendWord(word); output(dic); while(1); dic->removeWord(1); output(dic); } */ kasumi-2.5/KasumiAddWindow.cxx0000644000175000017500000004234311231301602013343 00000000000000/********************************************************************* * * KasumiAddWindow.cxx * * Kasumi - a management tool for a private dictionary of anthy * * Copyright (C) 2004-2006 Takashi Nakamoto * Copyright (C) 2005 Takuro Ashie * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. * *********************************************************************/ #include #include #include #include "KasumiAddWindow.hxx" #include "KasumiWord.hxx" #include "KasumiDic.hxx" #include "KasumiString.hxx" #include "KasumiConfiguration.hxx" #include "KasumiMainWindow.hxx" #include #include "intl.h" extern "C"{ // ad-hoc solution for a defect of Anthy #include "anthy/dicutil.h" } #ifdef HAVE_CONFIG_H #include "config.h" #endif using namespace std; KasumiAddWindow::KasumiAddWindow(KasumiDic *aDictionary, KasumiConfiguration *conf){ this->conf = conf; bool IsEUCJP = conf->getPropertyValueByBool("UseEUCJP"); dictionary = aDictionary; window = gtk_window_new(GTK_WINDOW_TOPLEVEL); gtk_window_set_position (GTK_WINDOW(window), GTK_WIN_POS_MOUSE); gtk_window_set_title(GTK_WINDOW(window), _("Kasumi (Register words)")); g_signal_connect(G_OBJECT(window), "delete_event", G_CALLBACK(_call_back_add_window_delete_event), this); // tooltips for every widget Tooltips = gtk_tooltips_new(); // creating vbox for text entries, spin button and so on. GtkWidget *vbox = gtk_vbox_new(FALSE,0); gtk_container_set_border_width(GTK_CONTAINER(vbox), 6); gtk_container_add(GTK_CONTAINER(window),vbox); // creating text entries for "Spelling" GtkWidget *label = gtk_label_new(_("Spelling")); GtkWidget *alignment = gtk_alignment_new(0, 0.5, 0, 0); gtk_alignment_set_padding(GTK_ALIGNMENT(alignment), 0, 0, 6, 6); gtk_container_add(GTK_CONTAINER(alignment),GTK_WIDGET(label)); gtk_box_pack_start(GTK_BOX(vbox),GTK_WIDGET(alignment),FALSE,FALSE,0); SpellingEntry = gtk_entry_new(); string spelling = conf->getPropertyValue("DefaultAddingSpelling"); if (IsEUCJP) spelling = KasumiWord::convertEUCJPToUTF8(spelling); gtk_entry_set_text(GTK_ENTRY(SpellingEntry), spelling.c_str()); alignment = gtk_alignment_new(0, 0.5, 1.0, 1.0); gtk_alignment_set_padding(GTK_ALIGNMENT(alignment), 0, 6, 6, 6); gtk_container_add(GTK_CONTAINER(alignment), SpellingEntry); gtk_box_pack_start(GTK_BOX(vbox),GTK_WIDGET(alignment),FALSE,FALSE,0); // creating text entries for "Sound" label = gtk_label_new(_("Sound")); alignment = gtk_alignment_new(0, 0.5, 0, 0); gtk_alignment_set_padding(GTK_ALIGNMENT(alignment), 0, 0, 6, 6); gtk_container_add(GTK_CONTAINER(alignment),GTK_WIDGET(label)); gtk_box_pack_start(GTK_BOX(vbox),GTK_WIDGET(alignment),FALSE,FALSE,0); SoundEntry = gtk_entry_new(); string sound = conf->getPropertyValue("DefaultAddingSound"); if (IsEUCJP) sound = KasumiWord::convertEUCJPToUTF8(sound); gtk_entry_set_text(GTK_ENTRY(SoundEntry), sound.c_str()); alignment = gtk_alignment_new(0, 0.5, 1.0, 1.0); gtk_alignment_set_padding(GTK_ALIGNMENT(alignment), 0, 6, 6, 6); gtk_container_add(GTK_CONTAINER(alignment), SoundEntry); gtk_box_pack_start(GTK_BOX(vbox),GTK_WIDGET(alignment),FALSE,FALSE,0); // creating spin button for "Frequency" label = gtk_label_new(_("Frequency")); alignment = gtk_alignment_new(0, 0.5, 0, 0); gtk_alignment_set_padding(GTK_ALIGNMENT(alignment), 0, 0, 6, 6); gtk_container_add(GTK_CONTAINER(alignment),GTK_WIDGET(label)); gtk_box_pack_start(GTK_BOX(vbox),GTK_WIDGET(alignment),FALSE,FALSE,0); const int FREQ_DEFAULT = conf->getPropertyValueByInt("DefaultFrequency"); const int FREQ_LBOUND = conf->getPropertyValueByInt("MinFrequency"); const int FREQ_UBOUND = conf->getPropertyValueByInt("MaxFrequency"); GtkObject *adjustment = gtk_adjustment_new(FREQ_DEFAULT, FREQ_LBOUND, FREQ_UBOUND, 1, FREQ_UBOUND / 100 ,0); FrequencySpin = gtk_spin_button_new(GTK_ADJUSTMENT(adjustment),1.0,0); alignment = gtk_alignment_new(0, 0.5, 1.0, 1.0); gtk_alignment_set_padding(GTK_ALIGNMENT(alignment), 0, 6, 6, 6); gtk_container_add(GTK_CONTAINER(alignment), FrequencySpin); gtk_box_pack_start(GTK_BOX(vbox),GTK_WIDGET(alignment),FALSE,FALSE,0); // creating combo box for "Word Type" label = gtk_label_new(_("Word Type")); alignment = gtk_alignment_new(0, 0.5, 0, 0); gtk_alignment_set_padding(GTK_ALIGNMENT(alignment), 0, 0, 6, 6); gtk_container_add(GTK_CONTAINER(alignment),GTK_WIDGET(label)); gtk_box_pack_start(GTK_BOX(vbox),GTK_WIDGET(alignment),FALSE,FALSE,0); string defaultCannaTab = conf->getPropertyValue("DefaultAddingWordType"); GtkListStore *gWordTypeCategoryList = gtk_list_store_new(WORDTYPE_NUM_COLS,G_TYPE_STRING,G_TYPE_POINTER); GtkTreeIter iter; WordTypeList::iterator p = KasumiWordType::beginWordTypeList(); list wordCategoryList; while(p != KasumiWordType::endWordTypeList()) { string category = (*p)->getCategory(); if( find( wordCategoryList.begin(), wordCategoryList.end(), category ) == wordCategoryList.end() ) { wordCategoryList.push_back( category ); gtk_list_store_append(gWordTypeCategoryList,&iter); gtk_list_store_set(gWordTypeCategoryList,&iter, COL_UI_STRING, category.c_str(), COL_WORDTYPE_POINTER, (*p), -1); if((*p)->getCannaTab() == defaultCannaTab) defaultWordTypeCategoryIter = iter; } p++; } WordTypeCategoryCombo = gtk_combo_box_new_with_model(GTK_TREE_MODEL(gWordTypeCategoryList)); GtkCellRenderer *renderer = GTK_CELL_RENDERER(gtk_cell_renderer_text_new()); gtk_cell_layout_pack_start(GTK_CELL_LAYOUT(WordTypeCategoryCombo), renderer, TRUE); gtk_cell_layout_set_attributes(GTK_CELL_LAYOUT(WordTypeCategoryCombo), renderer, "text", COL_UI_STRING, NULL); gtk_combo_box_set_active_iter(GTK_COMBO_BOX(WordTypeCategoryCombo), &defaultWordTypeCategoryIter); alignment = gtk_alignment_new(0, 0.5, 1.0, 1.0); gtk_alignment_set_padding(GTK_ALIGNMENT(alignment), 0, 6, 6, 6); gtk_container_add(GTK_CONTAINER(alignment), WordTypeCategoryCombo); gtk_box_pack_start(GTK_BOX(vbox), GTK_WIDGET(alignment),FALSE,FALSE,0); g_signal_connect(G_OBJECT(WordTypeCategoryCombo),"changed", G_CALLBACK(_call_back_word_type_category_changed),this); // creating combo box for "Subcategory of Word Type" label = gtk_label_new(_("Subcategory of Word Type")); alignment = gtk_alignment_new(0, 0.5, 0, 0); gtk_alignment_set_padding(GTK_ALIGNMENT(alignment), 0, 0, 6, 6); gtk_container_add(GTK_CONTAINER(alignment),GTK_WIDGET(label)); gtk_box_pack_start(GTK_BOX(vbox),GTK_WIDGET(alignment),FALSE,FALSE,0); GtkListStore *gWordTypeList = gtk_list_store_new(WORDTYPE_NUM_COLS,G_TYPE_STRING,G_TYPE_POINTER); // dummy model WordTypeCombo = gtk_combo_box_new_with_model(GTK_TREE_MODEL(gWordTypeList)); renderer = GTK_CELL_RENDERER(gtk_cell_renderer_text_new()); gtk_cell_layout_pack_start(GTK_CELL_LAYOUT(WordTypeCombo), renderer, TRUE); gtk_cell_layout_set_attributes(GTK_CELL_LAYOUT(WordTypeCombo), renderer, "text", COL_UI_STRING, NULL); alignment = gtk_alignment_new(0, 0.5, 1.0, 1.0); gtk_alignment_set_padding(GTK_ALIGNMENT(alignment), 0, 12, 6, 6); gtk_container_add(GTK_CONTAINER(alignment), WordTypeCombo); gtk_box_pack_start(GTK_BOX(vbox), GTK_WIDGET(alignment),FALSE,FALSE,0); ChangeWordTypeList(true); // creating box for buttons GtkWidget *hbutton_box = gtk_hbutton_box_new(); gtk_box_set_spacing(GTK_BOX(hbutton_box),6); gtk_button_box_set_layout(GTK_BUTTON_BOX(hbutton_box),GTK_BUTTONBOX_SPREAD); gtk_box_pack_start(GTK_BOX(vbox),GTK_WIDGET(hbutton_box),FALSE,FALSE,6); if( conf->getPropertyValue("StartupMode") == "EXCLUSIVE" ) { GtkWidget *button = gtk_button_new_from_stock(GTK_STOCK_ADD); gtk_box_pack_start(GTK_BOX(hbutton_box),GTK_WIDGET(button),TRUE,TRUE,0); g_signal_connect(G_OBJECT(button),"clicked", G_CALLBACK(_call_back_add_window_add),this); gtk_tooltips_set_tip(Tooltips, button, _("Add entered word and quit registration."), _("If all the necessary items are filled in, add entered word and quit registration.")); button = gtk_button_new_from_stock(GTK_STOCK_CLOSE); gtk_box_pack_start(GTK_BOX(hbutton_box),GTK_WIDGET(button),TRUE,TRUE,0); g_signal_connect(G_OBJECT(button),"clicked", G_CALLBACK(_call_back_add_window_quit),this); gtk_tooltips_set_tip(Tooltips, button, _("Cancel registration and quit."), _("Cancel registration and quit.")); gtk_window_set_keep_above(GTK_WINDOW(window), TRUE); } else { // ADD mode // creating buttons and configure shortcut key GtkWidget *button = gtk_button_new_from_stock(GTK_STOCK_ADD); gtk_box_pack_start(GTK_BOX(hbutton_box),GTK_WIDGET(button),TRUE,TRUE,0); g_signal_connect(G_OBJECT(button),"clicked", G_CALLBACK(_call_back_add_window_add),this); gtk_tooltips_set_tip(Tooltips, button, _("Add entered word"), _("If all the necessary items are filled in, add entered word.")); button = gtk_button_new_from_stock(GTK_STOCK_EDIT); gtk_box_pack_start(GTK_BOX(hbutton_box),GTK_WIDGET(button),TRUE,TRUE,0); g_signal_connect(G_OBJECT(button),"clicked", G_CALLBACK(_call_back_manage_mode),this); gtk_tooltips_set_tip(Tooltips, button, _("Manage mode"), _("Make the shift to manage mode to modify and remove registered words.")); button = gtk_button_new_from_stock(GTK_STOCK_CLOSE); gtk_box_pack_start(GTK_BOX(hbutton_box),GTK_WIDGET(button),TRUE,TRUE,0); g_signal_connect(G_OBJECT(button),"clicked", G_CALLBACK(_call_back_add_window_quit),this); gtk_tooltips_set_tip(Tooltips, button, _("Quit this application"), _("Save dictionary and quit this application.")); // get selection at the time of launching g_signal_connect(G_OBJECT(SpellingEntry),"selection_received", G_CALLBACK(_call_back_selection_data_received),NULL); } gtk_widget_show_all(window); // resize window appropriate size gtk_window_reshow_with_initial_size(GTK_WINDOW(window)); gtk_window_set_resizable(GTK_WINDOW(window),true); // set default window position // int x = conf->getPropertyValueByInt("DefaultWindowPosX"); // int y = conf->getPropertyValueByInt("DefaultWindowPosY"); // if(x >= 0 && y >= 0){ // gtk_window_move(GTK_WINDOW(window),x,y); // } if(conf->getPropertyValue("DefaultAddingSpelling") == "" && conf->getPropertyValueByBool("ImportSelectedText")){ get_targets(SpellingEntry); } } KasumiAddWindow::~KasumiAddWindow(){ destroy(); } void KasumiAddWindow::destroy(){ gtk_widget_destroy(window); } void KasumiAddWindow::quit(){ dictionary->store(); // anthy_dic_util_quit(); delete dictionary; delete this; gtk_main_quit(); } void KasumiAddWindow::ClickedAddButton(GtkWidget *widget){ KasumiWord *word = KasumiWord::createNewWord(conf); try{ // register entered word if(string(gtk_entry_get_text(GTK_ENTRY(SoundEntry))) == ""){ GtkWidget *dialog = gtk_message_dialog_new (GTK_WINDOW(window), GTK_DIALOG_DESTROY_WITH_PARENT, GTK_MESSAGE_ERROR, GTK_BUTTONS_CLOSE, _("Invalid entry for Sound.")); gtk_dialog_run (GTK_DIALOG (dialog)); gtk_widget_destroy (dialog); delete(word); return; } word->setSoundByUTF8(string(gtk_entry_get_text(GTK_ENTRY(SoundEntry)))); if(string(gtk_entry_get_text(GTK_ENTRY(SpellingEntry))) == ""){ GtkWidget *dialog = gtk_message_dialog_new (GTK_WINDOW(window), GTK_DIALOG_DESTROY_WITH_PARENT, GTK_MESSAGE_ERROR, GTK_BUTTONS_CLOSE, _("Invalid entry for Spelling.") ); gtk_dialog_run (GTK_DIALOG (dialog)); gtk_widget_destroy (dialog); delete(word); return; } word->setSpellingByUTF8(string(gtk_entry_get_text( GTK_ENTRY(SpellingEntry)))); word->setFrequency(gtk_spin_button_get_value_as_int( GTK_SPIN_BUTTON(FrequencySpin))); GtkTreeIter iter; KasumiWordType *type; GtkTreeModel *model = gtk_combo_box_get_model(GTK_COMBO_BOX(WordTypeCombo)); gtk_combo_box_get_active_iter(GTK_COMBO_BOX(WordTypeCombo), &iter); gtk_tree_model_get(model, &iter, COL_WORDTYPE_POINTER, &type, -1); word->setWordType(type); dictionary->appendWord(word); string mode = conf->getPropertyValue("StartupMode"); if( mode == "EXCLUSIVE" ) { cout << word->getSpelling() << "," << word->getSound() << "," << word->getFrequency() << "," << word->getWordType()->getCannaTab() << endl; quit(); } else if( mode == "ADD" ) { gtk_entry_set_text(GTK_ENTRY(SoundEntry), ""); gtk_entry_set_text(GTK_ENTRY(SpellingEntry), ""); const int FREQ_DEFAULT = conf->getPropertyValueByInt("DefaultFrequency"); gtk_spin_button_set_value(GTK_SPIN_BUTTON(FrequencySpin),FREQ_DEFAULT); gtk_combo_box_set_active_iter(GTK_COMBO_BOX(WordTypeCategoryCombo), &defaultWordTypeCategoryIter); ChangeWordTypeList(true); } }catch(KasumiException e){ handleException(e); } } void KasumiAddWindow::SwitchToManageMode(){ new KasumiMainWindow(dictionary,conf); delete this; } void KasumiAddWindow::ChangeWordTypeList(bool toDefault = false){ GtkTreeIter iter; GtkTreeIter defaultIter; bool defaultFlag = false; KasumiWordType *tmp; string category; string defaultCannaTab = conf->getPropertyValue("DefaultAddingWordType"); gtk_combo_box_get_active_iter(GTK_COMBO_BOX(WordTypeCategoryCombo), &iter); gtk_tree_model_get(gtk_combo_box_get_model( GTK_COMBO_BOX(WordTypeCategoryCombo)), &iter, COL_WORDTYPE_POINTER, &tmp, -1 ); category = tmp->getCategory(); GtkListStore *gWordTypeList = gtk_list_store_new(WORDTYPE_NUM_COLS,G_TYPE_STRING,G_TYPE_POINTER); WordTypeList::iterator p = KasumiWordType::beginWordTypeList(); while(p != KasumiWordType::endWordTypeList()) { if( (*p)->getCategory() == category ) { gtk_list_store_append(gWordTypeList,&iter); if( (*p)->getPos().size() != 0 ) gtk_list_store_set(gWordTypeList,&iter, COL_UI_STRING, (*p)->getPos().c_str(), COL_WORDTYPE_POINTER, (*p), -1); else gtk_list_store_set(gWordTypeList,&iter, COL_UI_STRING, (*p)->getCategory().c_str(), COL_WORDTYPE_POINTER, (*p), -1); if( (*p)->getCannaTab() == defaultCannaTab ) { defaultFlag = true; defaultIter = iter; } } p++; } gtk_combo_box_set_model(GTK_COMBO_BOX(WordTypeCombo), GTK_TREE_MODEL(gWordTypeList)); if( defaultFlag && toDefault ) gtk_combo_box_set_active_iter(GTK_COMBO_BOX(WordTypeCombo), &defaultIter); else gtk_combo_box_set_active(GTK_COMBO_BOX(WordTypeCombo), 0); } void _call_back_add_window_delete_event(GtkWidget *widget, GdkEvent *event, gpointer data){ KasumiAddWindow *window = (KasumiAddWindow *)data; window->quit(); } void _call_back_add_window_quit(GtkWidget *widget, gpointer data){ KasumiAddWindow *window = (KasumiAddWindow *)data; window->quit(); } void _call_back_add_window_add(GtkWidget *widget, gpointer data){ KasumiAddWindow *window = (KasumiAddWindow *)data; window->ClickedAddButton(widget); } void _call_back_manage_mode(GtkWidget *widget, gpointer data){ KasumiAddWindow *window = (KasumiAddWindow *)data; window->SwitchToManageMode(); } // to set selected string to SpellingEntry void _call_back_selection_data_received(GtkWidget *widget, GtkSelectionData *selection_data, gpointer data){ if(selection_data->length < 0){ // failed retrieving selection // do nothing return; } string atom_name = string(gdk_atom_name(selection_data->type)); gchar *str; str = reinterpret_cast(selection_data->data); if(atom_name == "UTF8_STRING"){ gtk_entry_set_text(GTK_ENTRY(widget), str); } return; } // to get selected string void get_targets(GtkWidget *data){ static GdkAtom targets_atom = GDK_NONE; GtkWidget *window = (GtkWidget *)data; targets_atom = gdk_atom_intern("UTF8_STRING", FALSE); gtk_selection_convert(window, GDK_SELECTION_PRIMARY, targets_atom, GDK_CURRENT_TIME); } void _call_back_word_type_category_changed(GtkWidget *widget, gpointer data) { KasumiAddWindow *window = (KasumiAddWindow *)data; window->ChangeWordTypeList(); } kasumi-2.5/KasumiString.hxx0000644000175000017500000000567510435636705012771 00000000000000/********************************************************************* * * KasumiString.hxx * * Kasumi - a management tool for a private dictionary of anthy * * Copyright (C) 2004-2006 Takashi Nakamoto * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. * *********************************************************************/ #ifndef __KASUMI_STRING_HXX__ #define __KASUMI_STRING_HXX__ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #define EUCJP_HINNSHI "\xc9\xca\xbb\xec" #define EUCJP_MEISHI "\xcc\xbe\xbb\xec" #define EUCJP_FUKUSHI "\xc9\xfb\xbb\xec" #define EUCJP_JINNMEI "\xbf\xcd\xcc\xbe" #define EUCJP_CHIMEI "\xc3\xcf\xcc\xbe" #define EUCJP_KEIYOUSHI "\xb7\xc1\xcd\xc6\xbb\xec" #define EUCJP_DOUSHI "\xc6\xb0\xbb\xec" #define EUCJP_NASETSUZOKU "\xa4\xca\xc0\xdc\xc2\xb3" #define EUCJP_GOKANNNOMIDEBUNNSETSU "\xb8\xec\xb4\xb4\xa4\xce\xa4\xdf\xa4\xc7\xca\xb8\xc0\xe1" #define EUCJP_SASETSUZOKU "\xa4\xb5\xc0\xdc\xc2\xb3" #define EUCJP_SURUSETSUZOKU "\xa4\xb9\xa4\xeb\xc0\xdc\xc2\xb3" #define EUCJP_KAKUJOSHISETSUZOKU "\xb3\xca\xbd\xf5\xbb\xec\xc0\xdc\xc2\xb3" #define EUCJP_TOSETSUZOKU "\xa4\xc8\xc0\xdc\xc2\xb3" #define EUCJP_TARUSETSUZOKU "\xa4\xbf\xa4\xeb\xc0\xdc\xc2\xb3" #define EUCJP_KATSUYOU "\xb3\xe8\xcd\xd1" #define EUCJP_BAGYOUGODAN "\xa5\xd0\xb9\xd4\xb8\xde\xc3\xca" #define EUCJP_GAGYOUGODAN "\xa5\xac\xb9\xd4\xb8\xde\xc3\xca" #define EUCJP_KAGYOUGODAN "\xa5\xab\xb9\xd4\xb8\xde\xc3\xca" #define EUCJP_MAGYOUGODAN "\xa5\xde\xb9\xd4\xb8\xde\xc3\xca" #define EUCJP_NAGYOUGODAN "\xa5\xca\xb9\xd4\xb8\xde\xc3\xca" #define EUCJP_RAGYOUGODAN "\xa5\xe9\xb9\xd4\xb8\xde\xc3\xca" #define EUCJP_SAGYOUGODAN "\xa5\xb5\xb9\xd4\xb8\xde\xc3\xca" #define EUCJP_TAGYOUGODAN "\xa5\xbf\xb9\xd4\xb8\xde\xc3\xca" #define EUCJP_WAGYOUGODAN "\xa5\xef\xb9\xd4\xb8\xde\xc3\xca" #define EUCJP_RENNYOUKEINOMEISHIKA "\xcf\xa2\xcd\xd1\xb7\xc1\xa4\xce\xcc\xbe\xbb\xec\xb2\xbd" using namespace std; class KasumiString : public string{ private: public: // methods to examine one line string bool isCommentLine(); bool isEmptyLine(); bool isEntryLine(); bool isKeyValLine(); string getSound(); unsigned int getFrequency(); string getSpelling(); string getKey(); string getVal(); }; int str2int(const string &str); string int2str(int i); bool isInt(const string &str); #endif kasumi-2.5/AUTHORS0000644000175000017500000000064410450504040010636 00000000000000Creator: Takashi Nakamoto Developer team: Takashi Nakamoto Takuro Ashie Ikuya Awashiro Japanese localization team: Takashi Nakamoto Italian localization team: Diego 'Flameeyes' Pettenò Contributors: Diego 'Flameeyes' Pettenò kasumi-2.5/kasumi.png0000644000175000017500000000465110211343557011600 00000000000000PNG  IHDR szzbKGD pHYs  tIMEu`tEXtCommentCreated with The GIMPd%n IDATXÝW{lg=l:q쵕8$ MJ"ї* "*(jJ PUGjUTTIjinu};^KIFZvof~3CLpHs`6(s12KFOoq$H}pbŷ aTm/ d`*}3a&crY"L|:2ޚ)冾]&f_2rs^Jm],C`ŢA27?ry홵>7D[nЅ2N^s;p>c0E!i Xa#+thO . }ar/N!AI* 5w։,ii6 HlBUN /֔?ϖu0Ề/r_\_GZgT.mIG/륲JGCJf-k(/MX(--Vh9wft$HBiÉ @B=BnLeԺ߹splk2ϛi?S:1E; m >d]6.weB3X# Cqh˯|瑱|9:%`]0L&\>m_omF2H AHrpE3R|A&gB@USPKPu1SN~s^j(89ўy4$ g&8 p2nyJMF{Ҁ~cUq' s[Ɛ c am U%Mƀ#މ}8p]u%ѾT\~~ZT0¯%AT)!lȉݠ `JA4L m !X\Oɞ=&f躖2am-Mr8N8 \ uВ9rs0>3ʽ_jJ]UU6M\<D:TMxu@ @@%00=[T6;d8e !d;!U䆥{_~ !~E.0v4 K@ hz }׷Pob1Rvy8_3c@Ujٲ!֚1vU)kb 4mw d_'5h3  !Ppy9Ǵ,5M !$m;%l΍h4'rk\aLS@JI/ _k R[yk?]3]/ő#וnW,$JH Mf`I \]ɑ{w2ǫQ 3#1|/CA:XQM.4\l>J.]@*peJosK(wd*"GFn=o9Ų 0]>ߛ6 u w/l'6m@L~){~]1q|$BUTB(৕%EbxHEZ ႄ r#7K/&˒<>o0,K⸈Pd@VN+ gg o;SW%#$"X--ƻ5p F &=b@c wG?pNlP/ޟsj7is^PlH,BP)_A2$ 0Q g ӧX说^6"_,Z( {gw'bQl8j9hi$!4g w'/*϶`Ot(-&m#`qEuvQ< \U!`۶u<`H0&@F36=C8X? ~+ *Oo "p64* '7Ecrs:Eb ld~nArq8+SO_Ij*2NKAiwxJk~qTD@<!6_ #include #include using namespace std; bool KasumiString::isCommentLine(){ // comment line is commented out by "#" if(find("#",0) == 0){ return true; } return false; } bool KasumiString::isEmptyLine(){ if(length() == 0){ return true; } return false; } bool KasumiString::isEntryLine(){ string::size_type i; // if(isKeyValLine()){ // return false; // } i = find(" ",0); if(i == npos){ return false; } i = find(" ",i+1); if(i == npos){ return false; } return true; } bool KasumiString::isKeyValLine(){ string::size_type i; i = find("=",0); if(i == npos){ return false; } return true; } string KasumiString::getSound(){ string::size_type i; if(isEntryLine()){ i = find(" ",0); return substr(0,i); } return NULL; } unsigned int KasumiString::getFrequency(){ string::size_type i,j; unsigned int ret=0; string sub; if(isEntryLine()){ i = find(" ",0); j = find(" ",i+1); sub = substr(i+1,j-i-1); ret = atoi(sub.c_str()); } return ret; } string KasumiString::getSpelling(){ int i; if(isEntryLine()){ // allow spelling to contain space // thanks to pinkmonky http://d.hatena.ne.jp/pinkmonkey/20050411 i = find(" ",0); i = find(" ",i+1); return substr(i+1); } return NULL; } string KasumiString::getKey(){ int i; if(isKeyValLine()){ i = find("=",0); while(c_str()[i-1] == ' ' || c_str()[i-1] == '\t'){ i--; } return substr(0,i); } return NULL; } string KasumiString::getVal(){ int i; if(isKeyValLine()){ i = find("=",0); while(c_str()[i+1] == ' ' || c_str()[i-1] == '\t'){ i++; } return substr(i+1); } return NULL; } int str2int(const string &str){ if(isInt(str)){ stringstream ss(str); int i; ss >> i; return i; } return 0; } string int2str(int i){ stringstream ss; ss << i; return ss.str(); } bool isInt(const string &str){ unsigned int i; if(str == "-" || str == ""){ return false; } if(str == "0"){ return true; } if(str.c_str()[0] == '-'){ i=1; }else{ i=0; } if(str.c_str()[i] >= '1' && str.c_str()[i] <= '9'){ for(i++;i '9'){ return false; } } return true; } return false; } kasumi-2.5/cellrendererspin.c0000644000175000017500000003124711226545147013314 00000000000000/*************************************************************************** * This file is derived from the repository of Veejay project * - Homepage: http://veejay.dyne.org/ * - File: trunk/veejay-devel/gveejay-reloaded/widgets/cellrendererspin.c * - Rivision: 501 * * a little bit modifications are made by Takashi Nakamoto ***************************************************************************/ /*************************************************************************** cellrendererspin.c ------------------ begin : Tue Oct 21 2003 copyright : (C) 2003 by Tim-Philipp Mller email : t.i.m at orange dot net ***************************************************************************/ /*************************************************************************** * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * ***************************************************************************/ /* * * This is a dirty 15-minute hack that tries to * make editable cells with spin buttons instead * of the text entry widget. * * Modify how you please. At the moment you need * to hook up your own cell data function to make * sure that the number of digits is the same in * editing mode as it is in non-editing mode. * * The parameters passed to _new() should probably * be properties, and probably we don't need most * of them anyway. Also, it would be good if there * was a better method to ensure that the number * of digits is the same without this. * * Maybe one should just rip out the whole _render * stuff from GtkCellRendererText and make a * whole new specialised GtkCellRenderFloat * or something. * * If anyone ever completes this code to sth useful, * or achieves sth similar in another way, or has * any comments on it, please drop me a mail. */ #include "cellrendererspin.h" #include #include #include #define GUI_CELL_RENDERER_SPIN_PATH "gui-cell-renderer-spin-path" #define GUI_CELL_RENDERER_SPIN_INFO "gui-cell-renderer-spin-info" /* Some boring function declarations: GObject type system stuff */ static void gui_cell_renderer_spin_init (GuiCellRendererSpin *cellspin); static void gui_cell_renderer_spin_class_init (GuiCellRendererSpinClass *klass); static void gui_cell_renderer_spin_finalize (GObject *gobject); static gpointer parent_class; static GtkCellEditable *gui_cell_renderer_spin_start_editing (GtkCellRenderer *cell, GdkEvent *event, GtkWidget *widget, const gchar *path, GdkRectangle *background_area, GdkRectangle *cell_area, GtkCellRendererState flags); struct _GCRSpinInfo { gulong focus_out_id; }; typedef struct _GCRSpinInfo GCRSpinInfo; /*************************************************************************** * * gui_cell_renderer_spin_get_type * * Here we register our type with the GObject type system if we * haven't done so yet. Everything else is done in the callbacks. * ***************************************************************************/ GType gui_cell_renderer_spin_get_type (void) { static GType cell_spin_type = 0; if (cell_spin_type) return cell_spin_type; if (1) { static const GTypeInfo cell_spin_info = { sizeof (GuiCellRendererSpinClass), NULL, /* base_init */ NULL, /* base_finalize */ (GClassInitFunc) gui_cell_renderer_spin_class_init, NULL, /* class_finalize */ NULL, /* class_data */ sizeof (GuiCellRendererSpin), 0, /* n_preallocs */ (GInstanceInitFunc) gui_cell_renderer_spin_init, }; /* Derive from GtkCellRenderer */ cell_spin_type = g_type_register_static (GTK_TYPE_CELL_RENDERER_TEXT, "GuiCellRendererSpin", &cell_spin_info, 0); } return cell_spin_type; } /*************************************************************************** * * gui_cell_renderer_spin_init * * Set some default properties of the parent (GtkCellRendererText). * ***************************************************************************/ static void gui_cell_renderer_spin_init (GuiCellRendererSpin *cellrendererspin) { return; } /*************************************************************************** * * gui_cell_renderer_spin_class_init: * ***************************************************************************/ static void gui_cell_renderer_spin_class_init (GuiCellRendererSpinClass *klass) { GtkCellRendererClass *cell_class = GTK_CELL_RENDERER_CLASS(klass); GObjectClass *object_class = G_OBJECT_CLASS(klass); parent_class = g_type_class_peek_parent (klass); object_class->finalize = gui_cell_renderer_spin_finalize; /* Override the cell renderer's edit-related methods */ cell_class->start_editing = gui_cell_renderer_spin_start_editing; } /*************************************************************************** * * gui_cell_renderer_spin_finalize: free any resources here * ***************************************************************************/ static void gui_cell_renderer_spin_finalize (GObject *object) { /* GuiCellRendererSpin *cellrendererspin = GUI_CELL_RENDERER_SPIN(object); */ /* Free any dynamically allocated resources here */ /* chain up to parent class to make sure * they release all their memory as well */ (* G_OBJECT_CLASS (parent_class)->finalize) (object); } /*************************************************************************** * * gui_cell_renderer_spin_new * * return a new cell renderer instance * (all the parameters should really be properties) * * Not sure which of all these values are really * relevant for the spin button - needs checking! * ***************************************************************************/ GtkCellRenderer * gui_cell_renderer_spin_new (gdouble lower, gdouble upper, gdouble step_inc, gdouble page_inc, gdouble page_size, gdouble climb_rate, guint digits) { GtkCellRenderer *cell; GuiCellRendererSpin *spincell; cell = g_object_new(GUI_TYPE_CELL_RENDERER_SPIN, NULL); spincell = GUI_CELL_RENDERER_SPIN(cell); spincell->lower = lower; spincell->upper = upper; spincell->step_inc = step_inc; spincell->page_inc = page_inc; spincell->page_size = page_size; spincell->climb_rate = climb_rate; spincell->digits = digits; return cell; } /*************************************************************************** * * gui_cell_renderer_spin_editing_done * ***************************************************************************/ static void gui_cell_renderer_spin_editing_done (GtkCellEditable *spinbutton, gpointer data) { const gchar *path; const gchar *new_text; GCRSpinInfo *info; info = g_object_get_data (G_OBJECT (data), GUI_CELL_RENDERER_SPIN_INFO); if (info->focus_out_id > 0) { g_signal_handler_disconnect (spinbutton, info->focus_out_id); info->focus_out_id = 0; } if (GTK_ENTRY(spinbutton)->editing_canceled) return; path = g_object_get_data (G_OBJECT (spinbutton), GUI_CELL_RENDERER_SPIN_PATH); new_text = gtk_entry_get_text (GTK_ENTRY(spinbutton)); g_signal_emit_by_name(data, "edited", path, new_text); } /*************************************************************************** * * gui_cell_renderer_spin_focus_out_event * ***************************************************************************/ static gboolean gui_cell_renderer_spin_focus_out_event (GtkWidget *spinbutton, GdkEvent *event, gpointer data) { gui_cell_renderer_spin_editing_done (GTK_CELL_EDITABLE (spinbutton), data); /* entry needs focus-out-event */ return FALSE; } /*************************************************************************** * * gui_cell_renderer_spin_start_editing * ***************************************************************************/ static gboolean onButtonPress (GtkWidget *spinbutton, GdkEventButton *bevent, gpointer data) { if (bevent->button == 1 && (bevent->type == GDK_2BUTTON_PRESS || bevent->type == GDK_3BUTTON_PRESS)) { /* g_print ("double or triple click caught and ignored.\n");*/ return TRUE; /* don't invoke other handlers */ } return FALSE; } /*************************************************************************** * * gui_cell_renderer_spin_start_editing * ***************************************************************************/ static GtkCellEditable * gui_cell_renderer_spin_start_editing (GtkCellRenderer *cell, GdkEvent *event, GtkWidget *widget, const gchar *path, GdkRectangle *background_area, GdkRectangle *cell_area, GtkCellRendererState flags) { GtkCellRendererText *celltext; GuiCellRendererSpin *spincell; GtkAdjustment *adj; GtkWidget *spinbutton; GCRSpinInfo *info; gdouble curval = 0.0; celltext = GTK_CELL_RENDERER_TEXT(cell); spincell = GUI_CELL_RENDERER_SPIN(cell); /* If the cell isn't editable we return NULL. */ if (celltext->editable == FALSE) return NULL; spinbutton = g_object_new (GTK_TYPE_SPIN_BUTTON, "has_frame", FALSE, "numeric", TRUE, NULL); /* dirty */ if (celltext->text) curval = atof(celltext->text); adj = GTK_ADJUSTMENT(gtk_adjustment_new(curval, spincell->lower, spincell->upper, spincell->step_inc, spincell->page_inc, spincell->page_size)); gtk_spin_button_configure(GTK_SPIN_BUTTON(spinbutton), adj, spincell->climb_rate, spincell->digits); g_object_set_data_full (G_OBJECT(spinbutton), GUI_CELL_RENDERER_SPIN_PATH, g_strdup (path), g_free); gtk_editable_select_region (GTK_EDITABLE (spinbutton), 0, -1); gtk_widget_show (spinbutton); g_signal_connect (spinbutton, "editing_done", G_CALLBACK (gui_cell_renderer_spin_editing_done), celltext); /* hack trying to catch the quite annoying effect * a double click has while editing */ g_signal_connect (spinbutton, "button_press_event", G_CALLBACK (onButtonPress), NULL); info = g_new0(GCRSpinInfo, 1); info->focus_out_id = g_signal_connect (spinbutton, "focus_out_event", G_CALLBACK (gui_cell_renderer_spin_focus_out_event), celltext); g_object_set_data_full (G_OBJECT (cell), GUI_CELL_RENDERER_SPIN_INFO, info, g_free); return GTK_CELL_EDITABLE (spinbutton); } kasumi-2.5/KasumiWordType.hxx0000644000175000017500000000447210436203747013267 00000000000000/********************************************************************* * * KasumiWordType.hxx * * Kasumi - a management tool for a private dictionary of anthy * * Copyright (C) 2004-2006 Takashi Nakamoto * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. * *********************************************************************/ #ifndef __KASUMI_WORD_TYPE_HXX__ #define __KASUMI_WORD_TYPE_HXX__ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include using namespace std; class KasumiWordType; // pre-declaration typedef list WordTypeList; class KasumiWordType { private: string msPos; // part of speech such as noun, verb and so on string msCategory; // subcategory of Pos string msCannaTab; int mnComp; static int comp_seed; KasumiWordType(string sPos, string sCategory, string sCannaTab); static WordTypeList _lWordTypes; public: static void initWordTypeList(); string getPos(){ return msPos; }; string getCategory(){ return msCategory; }; string getCannaTab(){ return msCannaTab; }; string getUIString(); static WordTypeList::iterator beginWordTypeList(){ return _lWordTypes.begin(); }; static WordTypeList::iterator endWordTypeList(){ return _lWordTypes.end(); }; static void addNewWordType(string sPos, string sCategory, string sCannaTab); static KasumiWordType* getWordTypeFromCannaTab(string sCannaTab); static KasumiWordType* getWordTypeFromPos(string sPos); int comp(KasumiWordType *op){ return op ? mnComp - op->mnComp : -1; }; // for sort function bool equal(KasumiWordType *op){ return comp(op) == 0 ? true : false; }; }; #endif kasumi-2.5/missing0000755000175000017500000002403210224163130011162 00000000000000#! /bin/sh # Common stub for a few missing GNU programs while installing. # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi case "$1" in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case "$1" in -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch]" ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing 0.4 - GNU automake" ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; aclocal*) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case "$f" in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake*) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; autom4te) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is needed, and you do not seem to have it handy on your system. You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo "#! /bin/sh" echo "# Created by GNU Automake missing as a replacement of" echo "# $ $@" echo "exit 0" chmod +x $file exit 1 fi ;; bison|yacc) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.h fi ;; esac fi if [ ! -f y.tab.h ]; then echo >y.tab.h fi if [ ! -f y.tab.c ]; then echo 'main() { return 0; }' >y.tab.c fi ;; lex|flex) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if [ ! -f lex.yy.c ]; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` fi if [ -f "$file" ]; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit 1 fi ;; makeinfo) if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then # We have makeinfo, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` fi touch $file ;; tar) shift if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 fi # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar "$@" && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar "$@" && exit 0 fi firstarg="$1" if shift; then case "$firstarg" in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac case "$firstarg" in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and you do not seem to have it handy on your system. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 kasumi-2.5/Makefile.am0000644000175000017500000000174410514077347011644 00000000000000bin_PROGRAMS = kasumi kasumi_SOURCES = main.cxx intl.h \ KasumiDic.cxx KasumiDic.hxx \ KasumiWord.cxx KasumiWord.hxx \ KasumiWordType.cxx KasumiWordType.hxx \ KasumiString.cxx KasumiString.hxx \ KasumiException.cxx KasumiException.hxx \ KasumiMainWindow.cxx KasumiMainWindow.hxx \ KasumiAddWindow.cxx KasumiAddWindow.hxx \ KasumiDicEventListener.hxx \ KasumiWordEventListener.hxx \ KasumiConfiguration.cxx KasumiConfiguration.hxx \ cellrendererspin.c cellrendererspin.h \ kasumi.png \ kasumi.1 \ kasumi.desktop.in appicondir = $(datadir)/pixmaps appicon_DATA = kasumi.png kasumi_LDADD = $(INTLLIBS) $(LTLIBICONV) man_MANS = kasumi.1 EXTRA_DIST = $(man_MANS) desktopdir = $(datadir)/applications Desktop_in_files = kasumi.desktop.in desktop_DATA = $(Desktop_in_files:.desktop.in=.desktop) localedir = $(datadir)/locale AM_CPPFLAGS=-DLOCALEDIR=\"$(localedir)\" SUBDIRS = intl m4 po ACLOCAL_AMFLAGS = -I m4 CLEANFILES = $(desktop_DATA) #EXTRA_DIST = config.rpath kasumi-2.5/KasumiConfiguration.hxx0000644000175000017500000000365110435636705014322 00000000000000/********************************************************************* * * KasumiConfiguration.hxx * * Kasumi - a management tool for a private dictionary of anthy * * Copyright (C) 2004-2006 Takashi Nakamoto * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. * *********************************************************************/ #ifndef __KASUMI_CONFIGURATION_HXX__ #define __KASUMI_CONFIGURATION_HXX__ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include "KasumiException.hxx" class KasumiConfiguration{ private: map config; string ConfFileName; void loadDefaultProperties() throw(KasumiException); void loadConfigurationFile() throw (KasumiException); void loadConfigurationFromArgument(int argc, char *argv[]) throw(KasumiException); void saveConfiguration() throw (KasumiException); void setPropertyValue(const string &name, const string &value); void checkValidity() throw(KasumiException); public: KasumiConfiguration(int argc, char *argv[]) throw (KasumiException); ~KasumiConfiguration(); string getPropertyValue(const string &name); int getPropertyValueByInt(const string &name); bool getPropertyValueByBool(const string &name); }; bool isValidShortcutKey(const string &key); #endif kasumi-2.5/cellrendererspin.h0000644000175000017500000000666110436263332013316 00000000000000/*************************************************************************** * This file is derived from the repository of Veejay project * - Homepage: http://veejay.dyne.org/ * - File: trunk/veejay-devel/gveejay-reloaded/widgets/cellrendererspin.h * - Rivision: 501 * * a little bit modifications are made by Takashi Nakamoto ***************************************************************************/ /*************************************************************************** cellrendererspin.h ------------------ begin : Tue Oct 21 2003 copyright : (C) 2003 by Tim-Philipp Mller email : t.i.m at orange dot net ***************************************************************************/ /*************************************************************************** * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * ***************************************************************************/ #ifndef _cellrendererspin_h_included_ #define _cellrendererspin_h_included_ #include G_BEGIN_DECLS /* Some boilerplate GObject type check and type cast macros */ #define GUI_TYPE_CELL_RENDERER_SPIN (gui_cell_renderer_spin_get_type()) #define GUI_CELL_RENDERER_SPIN(obj) (G_TYPE_CHECK_INSTANCE_CAST((obj), GUI_TYPE_CELL_RENDERER_SPIN, GuiCellRendererSpin)) #define GUI_CELL_RENDERER_SPIN_CLASS(klass) (G_TYPE_CHECK_CLASS_CAST ((klass), GUI_TYPE_CELL_RENDERER_SPIN, GuiCellRendererSpinClass)) #define GUI_IS_CELL_RENDERER_SPIN(obj) (G_TYPE_CHECK_INSTANCE_TYPE ((obj), GUI_TYPE_CELL_RENDERER_SPIN)) #define GUI_IS_CELL_RENDERER_SPIN_CLASS(klass) (G_TYPE_CHECK_CLASS_TYPE ((klass), GUI_TYPE_CELL_RENDERER_SPIN)) #define GUI_CELL_RENDERER_SPIN_GET_CLASS(obj) (G_TYPE_INSTANCE_GET_CLASS ((obj), GUI_TYPE_CELL_RENDERER_SPIN, GuiCellRendererSpinClass)) typedef struct _GuiCellRendererSpin GuiCellRendererSpin; typedef struct _GuiCellRendererSpinClass GuiCellRendererSpinClass; struct _GuiCellRendererSpin { GtkCellRendererText parent; gdouble lower; gdouble upper; gdouble step_inc; gdouble page_inc; gdouble page_size; gdouble climb_rate; guint digits; }; struct _GuiCellRendererSpinClass { GtkCellRendererTextClass parent_class; }; GType gui_cell_renderer_spin_get_type (void); GtkCellRenderer *gui_cell_renderer_spin_new (gdouble lower, gdouble upper, gdouble step_inc, gdouble page_inc, gdouble page_size, gdouble climb_rate, guint digits); G_END_DECLS #endif /* _spinbar_renderer_h_included_ */ kasumi-2.5/KasumiWordType.cxx0000644000175000017500000001273311226525726013263 00000000000000/********************************************************************* * * KasumiWordType.cxx * * Kasumi - a management tool for a private dictionary of anthy * * Copyright (C) 2004-2006 Takashi Nakamoto * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. * *********************************************************************/ #include "KasumiWordType.hxx" #include "KasumiWord.hxx" #include "intl.h" // static members of KasumiWordType WordTypeList KasumiWordType::_lWordTypes; int KasumiWordType::comp_seed = 0; void KasumiWordType::initWordTypeList() { KasumiWordType::addNewWordType(_("Noun"), _("General Noun"), "#T35"); KasumiWordType::addNewWordType(_("Noun"), _("followed by NA, SA and SURU"), "#T00"); KasumiWordType::addNewWordType(_("Noun"), _("followed by NA and SA"), "#T05"); KasumiWordType::addNewWordType(_("Noun"), _("followed by NA and SURU"), "#T10"); KasumiWordType::addNewWordType(_("Noun"), _("followed by NA"), "#T15"); KasumiWordType::addNewWordType(_("Noun"), _("followed by SURU"), "#T30"); KasumiWordType::addNewWordType(_("Proper Noun"), _("Name of people"), "#JN"); KasumiWordType::addNewWordType(_("Proper Noun"), _("Geographic Name"), "#CN"); KasumiWordType::addNewWordType(_("Proper Noun"), _("Corporate Name"), "#KK"); KasumiWordType::addNewWordType(_("Numeral"), "", "#NN"); KasumiWordType::addNewWordType(_("Adjective (Keiyoushi)"), "", "#KY"); KasumiWordType::addNewWordType(_("Adverb"), _("General Adverb"), "#F14"); KasumiWordType::addNewWordType(_("Adverb"), _("followed by TO and TARU"), "#F02"); KasumiWordType::addNewWordType(_("Adverb"), _("followed by TO and SURU"), "#F04"); KasumiWordType::addNewWordType(_("Adverb"), _("followed by TO"), "#F06"); KasumiWordType::addNewWordType(_("Adverb"), _("followed by SURU"), "#F12"); KasumiWordType::addNewWordType(_("Interjection"), "", "#CJ"); KasumiWordType::addNewWordType(_("Adnominal adjunct"), "", "#RT"); KasumiWordType::addNewWordType(_("Single Kanji Character"), "", "#KJ"); KasumiWordType::addNewWordType(_("Verb"), _("Ka 5"), "#K5"); KasumiWordType::addNewWordType(_("Verb"), _("Ga 5"), "#G5"); KasumiWordType::addNewWordType(_("Verb"), _("Sa 5"), "#S5"); KasumiWordType::addNewWordType(_("Verb"), _("Ta 5"), "#T5"); KasumiWordType::addNewWordType(_("Verb"), _("Na 5"), "#N5"); KasumiWordType::addNewWordType(_("Verb"), _("Ba 5"), "#B5"); KasumiWordType::addNewWordType(_("Verb"), _("Ma 5"), "#M5"); KasumiWordType::addNewWordType(_("Verb"), _("Ra 5"), "#R5"); KasumiWordType::addNewWordType(_("Verb"), _("Wa 5"), "#W5"); KasumiWordType::addNewWordType(_("Verb*"), _("Ka 5"), "#K5r"); KasumiWordType::addNewWordType(_("Verb*"), _("Ga 5"), "#G5r"); KasumiWordType::addNewWordType(_("Verb*"), _("Sa 5"), "#S5r"); KasumiWordType::addNewWordType(_("Verb*"), _("Ta 5"), "#T5r"); KasumiWordType::addNewWordType(_("Verb*"), _("Na 5"), "#N5r"); KasumiWordType::addNewWordType(_("Verb*"), _("Ba 5"), "#B5r"); KasumiWordType::addNewWordType(_("Verb*"), _("Ma 5"), "#M5r"); KasumiWordType::addNewWordType(_("Verb*"), _("Ra 5"), "#R5r"); KasumiWordType::addNewWordType(_("Verb*"), _("Wa 5"), "#W5r"); } KasumiWordType::KasumiWordType(string sCategory, string sPos, string sCannaTab) { msPos = sPos; msCategory = sCategory; msCannaTab = sCannaTab; mnComp = comp_seed++; } void KasumiWordType::addNewWordType(string sPos, string sCategory, string sCannaTab) { _lWordTypes.push_back(new KasumiWordType(sPos, sCategory, sCannaTab)); } KasumiWordType* KasumiWordType::getWordTypeFromCannaTab(string sCannaTab) { // return the completely same word type WordTypeList::iterator p = _lWordTypes.begin(); while(p != _lWordTypes.end()){ if( (*p)->getCannaTab() == sCannaTab ) return (*p); p++; } // return the alternative word type whose first character is equal to // specified one's char first_char = sCannaTab.c_str()[0]; p = _lWordTypes.begin(); while(p != _lWordTypes.end()){ if( first_char == (*p)->getCannaTab().c_str()[0] ) return (*p); p++; } // return the first word type as a fallback return *(_lWordTypes.begin()); } KasumiWordType* KasumiWordType::getWordTypeFromPos(string sPos) { WordTypeList::iterator p = _lWordTypes.begin(); while(p != _lWordTypes.end()){ if( (*p)->getPos() == sPos ) return (*p); p++; } // return the first word type as a fallback return *(_lWordTypes.begin()); } string KasumiWordType::getUIString() { if(msPos.size() != 0) return msCategory + " - " + msPos; else return msCategory; } /* // for debug int main() { KasumiWordType::addNewWordType("名詞", "一般名詞", "#T35"); KasumiWordType::addNewWordType("名詞", "人名", "#JN"); KasumiWordType::addNewWordType("名詞", "地名", "#CN"); } */ kasumi-2.5/KasumiException.cxx0000644000175000017500000000443010711644443013433 00000000000000/********************************************************************* * * KasumiException.cxx * * Kasumi - a management tool for a private dictionary of anthy * * Copyright (C) 2004-2006 Takashi Nakamoto * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. * *********************************************************************/ #include #include #include #include "KasumiException.hxx" #ifdef HAVE_CONFIG_H #include "config.h" #endif using namespace std; void handleException(KasumiException e){ GtkWidget *dialog; switch(e.getOutput()){ case STDERR: cerr << e.getMessage() << endl; break; case STDOUT: cout << e.getMessage() << endl; break; case ERR_DIALOG: dialog = gtk_message_dialog_new(NULL, (GtkDialogFlags)0, GTK_MESSAGE_ERROR, GTK_BUTTONS_CLOSE, "%s", e.getMessage().c_str()); gtk_dialog_run(GTK_DIALOG (dialog)); gtk_widget_destroy(dialog); break; case WARNING_DIALOG: dialog = gtk_message_dialog_new(NULL, (GtkDialogFlags)0, GTK_MESSAGE_WARNING, GTK_BUTTONS_OK, "%s", e.getMessage().c_str()); gtk_dialog_run(GTK_DIALOG (dialog)); gtk_widget_destroy(dialog); break; } switch(e.getDisposal()){ case KILL: exit(1); break; case QUIT: exit(0); break; case ALERT_ONLY: // nothing to do break; } } kasumi-2.5/KasumiWordEventListener.hxx0000644000175000017500000000277410447676364015153 00000000000000/********************************************************************* * * KasumiWordEventListener.hxx * * Kasumi - a management tool for a private dictionary of anthy * * Copyright (C) 2004-2006 Takashi Nakamoto * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. * *********************************************************************/ #ifndef __KASUMI_WORD_EVENT_LISTENER_HXX__ #define __KASUMI_WORD_EVENT_LISTENER_HXX__ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "KasumiWord.hxx" class KasumiWord; class KasumiWordEventListener{ private: public: virtual ~KasumiWordEventListener() {}; virtual void changedFrequency(KasumiWord *word) = 0; virtual void changedSpelling(KasumiWord *word) = 0; virtual void changedSound(KasumiWord *word) = 0; virtual void changedWordType(KasumiWord *word) = 0; }; #endif kasumi-2.5/KasumiException.hxx0000644000175000017500000000330710435636705013447 00000000000000/********************************************************************* * * KasumiException.hxx * * Kasumi - a management tool for a private dictionary of anthy * * Copyright (C) 2004-2006 Takashi Nakamoto * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. * *********************************************************************/ #ifndef __KASUMI_EXCEPTION_HXX__ #define __KASUMI_EXCEPTION_HXX__ #ifdef HAVE_CONFIG_H #include "config.h" #endif using namespace std; enum _output {STDOUT, STDERR, ERR_DIALOG, WARNING_DIALOG}; typedef _output Output; enum _disposal {KILL, QUIT, ALERT_ONLY}; typedef _disposal Disposal; class KasumiException{ private: string message; Output output; Disposal disposal; public: KasumiException(string aMessage, Output aOutput, Disposal aDisposal){ message = aMessage; output = aOutput; disposal = aDisposal; } string getMessage() { return message; } Output getOutput() { return output; } Disposal getDisposal() { return disposal; } }; void handleException(KasumiException e); #endif kasumi-2.5/depcomp0000755000175000017500000003305210224163130011142 00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects # Copyright 1999, 2000, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # `libtool' can also be set to `yes' or `no'. if test -z "$depfile"; then base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'` dir=`echo "$object" | sed 's,/.*$,/,'` if test "$dir" = "$object"; then dir= fi # FIXME: should be _deps on DOS. depfile="$dir.deps/$base" fi tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the `deleted header file' problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. tr ' ' ' ' < "$tmpdepfile" | ## Some versions of gcc put a space before the `:'. On the theory ## that the space means something, we add a space to the output as ## well. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like `#:fec' to the end of the # dependency line. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' ' ' ' >> $depfile echo >> $depfile # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> $depfile else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts `$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` tmpdepfile="$stripped.u" if test "$libtool" = yes; then "$@" -Wc,-M else "$@" -M fi stat=$? if test -f "$tmpdepfile"; then : else stripped=`echo "$stripped" | sed 's,^.*/,,'` tmpdepfile="$stripped.u" fi if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi if test -f "$tmpdepfile"; then outname="$stripped.o" # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; icc) # Intel's C compiler understands `-MD -MF file'. However on # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c # ICC 7.0 will fill foo.d with something like # foo.o: sub/foo.c # foo.o: sub/foo.h # which is wrong. We want: # sub/foo.o: sub/foo.c # sub/foo.o: sub/foo.h # sub/foo.c: # sub/foo.h: # ICC 7.1 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using \ : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1="$dir.libs/$base.lo.d" tmpdepfile2="$dir.libs/$base.d" "$@" -Wc,-MD else tmpdepfile1="$dir$base.o.d" tmpdepfile2="$dir$base.d" "$@" -MD fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi if test -f "$tmpdepfile1"; then tmpdepfile="$tmpdepfile1" else tmpdepfile="$tmpdepfile2" fi if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for `:' # in the target name. This is to cope with DOS-style filenames: # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. "$@" $dashmflag | sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' ' < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # X makedepend shift cleared=no for arg in "$@"; do case $cleared in no) set ""; shift cleared=yes ;; esac case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix="`echo $object | sed 's/^.*\././'`" touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" sed '1,2d' "$tmpdepfile" | tr ' ' ' ' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E | sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. "$@" || exit $? IFS=" " for arg do case "$arg" in "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 kasumi-2.5/KasumiMainWindow.hxx0000644000175000017500000002060110711644443013554 00000000000000/********************************************************************* * * KasumiMainWindow.hxx * * Kasumi - a management tool for a private dictionary of anthy * * Copyright (C) 2004-2006 Takashi Nakamoto * Copyright (C) 2006 Ikuya Awashiro * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. * *********************************************************************/ #ifndef __KASUMI_MAIN_WINDOW_HXX__ #define __KASUMI_MAIN_WINDOW_HXX__ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include #include "KasumiDic.hxx" #include "KasumiDicEventListener.hxx" #include "KasumiConfiguration.hxx" enum column_name { COL_ID = 0, COL_WORD, COL_YOMI, COL_FREQ, COL_PART, NUM_COLS }; enum wordtype_column_name { COL_UI_STRING = 0, COL_WORDTYPE_POINTER, WORDTYPE_NUM_COLS }; enum _TextColumnEnum { SPELLING = 0, SOUND, FREQ }; typedef _TextColumnEnum SearchBy; typedef _TextColumnEnum TextColumn; void _call_back_changed_wordtype_column(GtkComboBox *combo, gpointer data); gboolean _call_back_key_pressed_text_column(GtkWidget *widget, GdkEventKey *event, gpointer data); void _call_back_activate_search_entry(GtkWidget *widget, gpointer data); void _call_back_changed_search_entry(GtkWidget *widget, gpointer data); void _call_back_remove(GtkWidget *widget, gpointer data); void _call_back_delete_event(GtkWidget *widget, GdkEvent *event, gpointer data); void _call_back_quit(GtkWidget *widget, gpointer data); void _call_back_store(GtkWidget *widget, gpointer data); void _call_back_add(GtkWidget *widget, gpointer data); void _call_back_clicked_column_header(GtkTreeViewColumn *column, gpointer data); gboolean _call_back_key_pressed_text_column(GtkWidget *widget, GdkEventKey *event, gpointer data); void _call_back_editing_started_sound_column(GtkCellRenderer *render, GtkCellEditable *editable, gchar *path, gpointer data); void _call_back_edited_sound_column(GtkCellRendererText *renderer, gchar *arg1, gchar *arg2, gpointer data); void _call_back_editing_started_spelling_column(GtkCellRenderer *render, GtkCellEditable *editable, gchar *path, gpointer data); void _call_back_edited_spelling_column(GtkCellRendererText *renderer, gchar *arg1, gchar *arg2, gpointer data); void _call_back_editing_started_freq_column(GtkCellRenderer *render, GtkCellEditable *editable, gchar *path, gpointer data); void _call_back_edited_freq_column(GtkCellRendererText *renderer, gchar *arg1, gchar *arg2, gpointer data); void _call_back_editing_started_wordtype_column(GtkCellRenderer *render, GtkCellEditable *editable, gchar *path, gpointer data); class KasumiMainWindow : public KasumiDicEventListener{ friend void _call_back_delete_event(GtkWidget *widget, GdkEvent *event, gpointer data); friend void _call_back_quit(GtkWidget *widget, gpointer data); friend void _call_back_store(GtkWidget *widget, gpointer data); friend void _call_back_add(GtkWidget *widget, gpointer data); friend void _call_back_remove(GtkWidget *widget, gpointer data); /* // obsolete friend void _call_back_adding_mode(GtkWidget *widget, gpointer data); */ friend void _call_back_changed_search_entry(GtkWidget *widget, gpointer data); friend void _call_back_activate_search_entry(GtkWidget *widget, gpointer data); friend void _call_back_clicked_column_header(GtkTreeViewColumn *column, gpointer data); friend gboolean _call_back_key_pressed_text_column(GtkWidget *widget, GdkEventKey *event, gpointer data); friend void _call_back_editing_started_sound_column(GtkCellRenderer *render, GtkCellEditable *editable, gchar *path, gpointer data); friend void _call_back_edited_sound_column(GtkCellRendererText *renderer, gchar *arg1, gchar *arg2, gpointer data); friend void _call_back_editing_started_spelling_column(GtkCellRenderer *render, GtkCellEditable *editable, gchar *path, gpointer data); friend void _call_back_edited_spelling_column(GtkCellRendererText *renderer, gchar *arg1, gchar *arg2, gpointer data); friend void _call_back_editing_started_freq_column(GtkCellRenderer *render, GtkCellEditable *editable, gchar *path, gpointer data); friend void _call_back_edited_freq_column(GtkCellRendererText *renderer, gchar *arg1, gchar *arg2, gpointer data); friend void _call_back_editing_started_wordtype_column(GtkCellRenderer *render, GtkCellEditable *editable, gchar *path, gpointer data); friend void _call_back_changed_wordtype_column(GtkComboBox *combo, gpointer data); private: KasumiDic *dictionary; KasumiConfiguration *conf; GtkWidget *mWindow; GtkWidget *mSpellingRadio; GtkWidget *mSoundRadio; GtkWidget *mSearchEntry; GtkWidget *mWordListView; GtkWidget *mScrolledWindow; GtkWidget *mQuitButton; GtkWidget *mSaveButton; GtkWidget *mAddButton; GtkWidget *mRemoveButton; // GtkWidget *mChangeModeButton; // obsolete GtkListStore *WordList; GtkTreeModel *SortList; GtkTreeSelection *SortListSelection; GtkTreeViewColumn *mSpellingColumn; GtkTreeViewColumn *mSoundColumn; GtkTreeViewColumn *mFreqColumn; GtkTreeViewColumn *mWordTypeColumn; GtkTreePath *editingPath; guint lastKeyState; guint lastKeyVal; bool modificationFlag; string previousSoundEntryText; void createWindow(); void createWordList(); void registerCallbackFunctions(); void destroy(); void quit(); void ClickedStoreButton(); void ClickedAddButton(); void ClickedRemoveButton(); void SwitchToAddingMode(); void startedEditingTextColumn(GtkCellEditable *editable, string path, TextColumn col); void pressedKeyOnTextColumn(GtkWidget *widget, GdkEventKey *event); void editedTextColumn(GtkCellRendererText *renderer, const string &newSound, TextColumn col); void startedEditingWordTypeColumn(GtkCellEditable *editable, string path); void changedWordTypeColumn(GtkComboBox *combo); void FindNext(bool fromCurrent); GtkTreeIter *findCorrespondingIter(unsigned int id); void SortBy(GtkTreeViewColumn *column); public: KasumiMainWindow(KasumiDic *aDictionary, KasumiConfiguration *conf); virtual ~KasumiMainWindow(); void refresh(); void removedWord(unsigned int id); void appendedWord(KasumiWord *word); void modifiedWord(KasumiWord *word); }; guint getAccelKey(const string &key); GdkModifierType getModifierType(const string &key); gint sortFuncByFreq(GtkTreeModel *model, GtkTreeIter *a, GtkTreeIter *b, gpointer user_data); gint sortFuncBySound(GtkTreeModel *model, GtkTreeIter *a, GtkTreeIter *b, gpointer user_data); gint sortFuncByWordClass(GtkTreeModel *model, GtkTreeIter *a, GtkTreeIter *b, gpointer user_data); #endif kasumi-2.5/KasumiWord.cxx0000644000175000017500000002317611135356316012420 00000000000000/********************************************************************* * * KasumiWord.cxx * * Kasumi - a management tool for a private dictionary of anthy * * Copyright (C) 2004-2006 Takashi Nakamoto * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. * *********************************************************************/ #include #include #include #include #include #include "KasumiWord.hxx" #include "KasumiException.hxx" #include "KasumiConfiguration.hxx" #include "KasumiString.hxx" // for EUCJP_***(constant string) #include "intl.h" #include #define VECTOR_UNIT 10 using namespace std; iconv_t KasumiWord::IconvUTF8_To_EUCJP = iconv_open("EUC-JP", "UTF-8"); iconv_t KasumiWord::IconvEUCJP_To_UTF8 = iconv_open("UTF-8", "EUC-JP"); unsigned int KasumiWord::id_generator = 0; vector KasumiWord::words = vector(VECTOR_UNIT); string KasumiWord::convertUTF8ToEUCJP(const string &aUTF8){ char *utf8 = (char*)malloc(strlen(aUTF8.c_str())+1); strcpy(utf8, aUTF8.c_str()); size_t len = strlen(utf8)+1; size_t len_eucjp = len*2; char *eucjp_buf = (char*)malloc(len_eucjp); char *eucjp = eucjp_buf; iconv(IconvUTF8_To_EUCJP, const_cast(&utf8), &len, &eucjp_buf, &len_eucjp); return string(eucjp); } string KasumiWord::convertEUCJPToUTF8(const string &aEUCJP){ char *eucjp = (char*)malloc(strlen(aEUCJP.c_str())+1); strcpy(eucjp, aEUCJP.c_str()); size_t len = strlen(eucjp)+1; size_t len_utf8 = len*2; char *utf8_buf = (char*)malloc(len_utf8); char *utf8 = utf8_buf; iconv(IconvEUCJP_To_UTF8, const_cast(&eucjp), &len, &utf8_buf, &len_utf8); return string(utf8); } string KasumiWord::extractInvalidCharacterFromSound(string soundByUTF8){ const char *str = soundByUTF8.c_str(); unsigned char first,second,third; char res[5]; int i,size; size = soundByUTF8.size(); for(i=0;i (str[i]); second = static_cast (str[i+1]); third = static_cast (str[i+2]); if(first >= 0x21 && first <= 0x7e){ // ASCII character continue; }else if(first <= 0x7f){ res[0] = str[i]; res[1] = 0; return string(res); }else if(first >= 0x80 && first <= 0xc1){ // Even it is not encoded in UTF-8 string("non-UTF8 code detected"); }else if(first >= 0xc2 && first <= 0xdf){ res[0] = str[i]; res[1] = str[i+1]; res[2] = 0; return string(res); }else if(first >= 0xe0 && first <= 0xef){ if(first == 0xe3 && second == 0x83 && third == 0xbc){ // dash continue; }else if(first == 0xe3 && second == 0x80 && (third == 0x81 || third == 0x82)){ // punctuaiton mark continue; }else if(first == 0xe3 && second == 0x80 && (third == 0x8c || third == 0x8d)){ // corner brackets continue; }else if(first == 0xe3 && second == 0x80 && third == 0x9c){ // wave dash continue; }else if(first == 0xe3 && second == 0x81 && third >= 0x81 && third <= 0xbf){ // hiragana from "A" to "MI" continue; }else if(first == 0xe3 && second == 0x82 && third >= 0x80 && third <= 0x94){ // the rest of hiragana continue; }else if(first == 0xef && second == 0xbc && third >= 0x81 && third <= 0xa0){ // symbol marks of two-byte characters continue; }else if(first == 0xe3 && second == 0x82 && third == 0x9b){ // dakuon mark continue; }else{ res[0] = str[i]; res[1] = str[i+1]; res[2] = str[i+2]; res[3] = 0; return string(res); } }else if(first >= 0xf0 && first <= 0xf4){ res[0] = str[i]; res[1] = str[i+1]; res[2] = str[i+2]; res[3] = str[i+3]; res[4] = 0; return string(res); }else{ // Even it is not encoded in UTF-8 string("non-UTF8 code detected"); } } return string(); } KasumiWord::KasumiWord(KasumiConfiguration *conf){ IsEUCJP = conf->getPropertyValueByBool("UseEUCJP"); setSound(conf->getPropertyValue("DefaultSound")); setSpelling(conf->getPropertyValue("DefaultSpelling")); Frequency = conf->getPropertyValueByInt("DefaultFrequency"); try{ mWordType = NULL; setWordType(KasumiWordType::getWordTypeFromCannaTab(conf->getPropertyValue("DefaultWordType"))); }catch(KasumiException e){ cout << e.getMessage() << endl; exit(1); } } KasumiWord* KasumiWord::createNewWord(KasumiConfiguration *conf) { KasumiWord *word = new KasumiWord(conf); word->id = id_generator++; if(word->id >= words.size()) words.resize(words.size() + VECTOR_UNIT, NULL); KasumiWord::words[word->id] = word; return word; } void KasumiWord::setSound(const string &aSound) throw(KasumiException){ if(aSound == Sound) return; string tmp = IsEUCJP ? convertEUCJPToUTF8(Sound) : aSound; string invalidChar = extractInvalidCharacterFromSound(tmp); if(invalidChar != ""){ string message; message = string(_("Sound must consist of only Hiragana characters. You have entered invalid character: ")); message += invalidChar; throw KasumiException(message, ERR_DIALOG, ALERT_ONLY); } Sound = aSound; Sound_UTF8 = IsEUCJP ? convertEUCJPToUTF8(Sound) : Sound; for(size_t i=0;ichangedSound(this); } } void KasumiWord::setSoundByUTF8(const string &aSound) throw(KasumiException){ if(aSound == Sound_UTF8) return; string invalidChar = extractInvalidCharacterFromSound(aSound); if(invalidChar != ""){ string message; message = string(_("Sound must consist of only Hiragana characters. You have entered invalid character: ")); message += invalidChar; throw KasumiException(message, ERR_DIALOG, ALERT_ONLY); } Sound_UTF8 = aSound; Sound = IsEUCJP ? convertUTF8ToEUCJP(Sound_UTF8) : Sound_UTF8; for(size_t i=0;ichangedSound(this); } } void KasumiWord::setSpelling(const string &aSpelling){ if(aSpelling == Spelling) return; Spelling = aSpelling; Spelling_UTF8 = IsEUCJP ? convertEUCJPToUTF8(Spelling) : Spelling; for(size_t i=0;ichangedSpelling(this); } } void KasumiWord::setSpellingByUTF8(const string &aSpelling){ if(aSpelling == Spelling_UTF8) return; Spelling_UTF8 = aSpelling; Spelling = IsEUCJP ? convertUTF8ToEUCJP(Spelling_UTF8) : Spelling_UTF8; for(size_t i=0;ichangedSpelling(this); } } void KasumiWord::setFrequency(int aFrequency) { if(aFrequency == Frequency) return; Frequency = aFrequency; for(size_t i=0;ichangedFrequency(this); } } void KasumiWord::setWordType(KasumiWordType *aType) { if(aType->equal(mWordType)) return; mWordType = aType; for(size_t i=0;ichangedWordType(this); } } string KasumiWord::getWordTypeUIString() { if(mWordType != NULL) return mWordType->getUIString(); else return string(""); } KasumiWord* KasumiWord::getWordFromID(unsigned int id) { return KasumiWord::words[id]; } void KasumiWord::registerEventListener(KasumiWordEventListener *listener){ int i,size; size = EventListeners.size(); // if the listener have been already registered, nothing to do // assuring no duplication for(i=0;i::iterator i; KasumiWordEventListener *p; for(i=EventListeners.begin();i!=EventListeners.end();i++){ p = *i; if(p == listener){ EventListeners.erase(i); return; } } } /* // for debug int main(int argc, char *argv[]) { KasumiWordType::addNewWordType("̾", "̾", "#T35"); KasumiWordType::addNewWordType("̾", "̾", "#JN"); KasumiWordType::addNewWordType("̾", "̾", "#CN"); KasumiWordType::addNewWordType("̾", "", "#KK"); KasumiWordType::addNewWordType("̾", "³", "#T30"); KasumiWordType::addNewWordType("", "", "#NN"); KasumiWordType::addNewWordType("ƻ", "", "#KY"); KasumiWordType::addNewWordType("ƻ", "", "#KYT"); KasumiWordType::addNewWordType("ư", "", "#T05"); KasumiWordType::addNewWordType("", "", "#F04"); KasumiWordType::addNewWordType("ư", "", "#CJ"); KasumiWordType::addNewWordType("Ϣλ", "", "#RT"); KasumiWordType::addNewWordType("ñ", "", "#KJ"); KasumiWord *newWord = new KasumiWord(); newWord->setSound(""); newWord->setSpelling(""); newWord->setFrequency(180); newWord->setWordType(KasumiWordType::getWordTypeFromCannaTab("#T35")); cout << newWord->getSound() << " " << newWord->getSpelling() << " "; cout << newWord->getFrequency() << " " << endl; cout << newWord->getWordType()->getPos() << endl; cout << newWord->getWordType()->getCategory() << endl; } */ kasumi-2.5/README0000644000175000017500000000014110345200474010445 00000000000000How to use: (see the following page) http://kasumi.sourceforge.jp/index.php?%BB%C8%A4%A4%CA%FD kasumi-2.5/KasumiAddWindow.hxx0000644000175000017500000000650710514127504013364 00000000000000/********************************************************************* * * KasumiAddWindow.hxx * * Kasumi - a management tool for a private dictionary of anthy * * Copyright (C) 2004-2006 Takashi Nakamoto * Copyright (C) 2006 Ikuya Awashiro * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. * *********************************************************************/ #ifndef __KASUMI_ADD_WINDOW_HXX__ #define __KASUMI_ADD_WINDOW_HXX__ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include "KasumiDic.hxx" #include "KasumiWord.hxx" #include "KasumiConfiguration.hxx" void _call_back_add_window_delete_event(GtkWidget *widget, GdkEvent *event, gpointer data); void _call_back_add_window_quit(GtkWidget *widget, gpointer data); void _call_back_add_window_add(GtkWidget *widget, gpointer data); void _call_back_manage_mode(GtkWidget *widget, gpointer data); void _call_back_selection_data_received(GtkWidget *widget, GtkSelectionData *selection_data, gpointer data); void _call_back_word_type_category_changed(GtkWidget *widget, gpointer data); class KasumiAddWindow{ friend void _call_back_add_window_delete_event(GtkWidget *widget, GdkEvent *event, gpointer data); friend void _call_back_add_window_quit(GtkWidget *widget, gpointer data); friend void _call_back_add_window_add(GtkWidget *widget, gpointer data); friend void _call_back_manage_mode(GtkWidget *widget, gpointer data); friend void _call_back_add_window_changed_word_type_combo(GtkWidget *widget, gpointer data); friend void _call_back_selection_data_received(GtkWidget *widget, GtkSelectionData *selection_data, gpointer data) ; friend void _call_back_word_type_category_changed(GtkWidget *widget, gpointer data); private: KasumiDic *dictionary; KasumiConfiguration *conf; GtkWidget *window; GtkWidget *SpellingEntry; GtkWidget *SoundEntry; GtkWidget *FrequencySpin; GtkWidget *WordTypeCategoryCombo; GtkWidget *WordTypeCombo; GtkTooltips *Tooltips; GtkTreeIter defaultWordTypeCategoryIter; void destroy(); void quit(); void ClickedAddButton(GtkWidget *widget); void SwitchToManageMode(); void ChangeWordTypeList( bool toDefault ); public: KasumiAddWindow(KasumiDic *aDictionary, KasumiConfiguration *conf); ~KasumiAddWindow(); }; void get_targets(GtkWidget *data); #endif kasumi-2.5/kasumi.desktop.in0000644000175000017500000000070210440316357013065 00000000000000[Desktop Entry] Version=1.0 Encoding=UTF-8 Name=Anthy Dictionary editor Name[ja]=Anthy 辞書管理 GenericName=Management tool for a private dictionary of anthy GenericName[ja]=Anthy 個人辞書管理ツール Comment=Edit Anthy dictionary. Comment[ja]=Anthy の個人辞書に単語を登録、削除、編集するツールです。 Exec=kasumi Icon=kasumi.png StartupNotify=true Terminal=false Type=Application Categories=Applications;Settings; kasumi-2.5/aclocal.m40000644000175000017500000012022211227745450011440 00000000000000# generated automatically by aclocal 1.10.2 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],, [m4_warning([this file was generated for autoconf 2.63. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'.])]) # Configure paths for GTK+ # Owen Taylor 1997-2001 dnl AM_PATH_GTK_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) dnl Test for GTK+, and define GTK_CFLAGS and GTK_LIBS, if gthread is specified in MODULES, dnl pass to pkg-config dnl AC_DEFUN([AM_PATH_GTK_2_0], [dnl dnl Get the cflags and libraries from pkg-config dnl AC_ARG_ENABLE(gtktest, [ --disable-gtktest do not try to compile and run a test GTK+ program], , enable_gtktest=yes) pkg_config_args=gtk+-2.0 for module in . $4 do case "$module" in gthread) pkg_config_args="$pkg_config_args gthread-2.0" ;; esac done no_gtk="" AC_PATH_PROG(PKG_CONFIG, pkg-config, no) if test x$PKG_CONFIG != xno ; then if pkg-config --atleast-pkgconfig-version 0.7 ; then : else echo "*** pkg-config too old; version 0.7 or better required." no_gtk=yes PKG_CONFIG=no fi else no_gtk=yes fi min_gtk_version=ifelse([$1], ,2.0.0,$1) AC_MSG_CHECKING(for GTK+ - version >= $min_gtk_version) if test x$PKG_CONFIG != xno ; then ## don't try to run the test against uninstalled libtool libs if $PKG_CONFIG --uninstalled $pkg_config_args; then echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH" enable_gtktest=no fi if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then : else no_gtk=yes fi fi if test x"$no_gtk" = x ; then GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags` GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs` gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_gtktest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$GTK_LIBS $LIBS" dnl dnl Now check if the installed GTK+ is sufficiently new. (Also sanity dnl checks the results of pkg-config to some extent) dnl rm -f conf.gtktest AC_TRY_RUN([ #include #include #include int main () { int major, minor, micro; char *tmp_version; system ("touch conf.gtktest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_gtk_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_gtk_version"); exit(1); } if ((gtk_major_version != $gtk_config_major_version) || (gtk_minor_version != $gtk_config_minor_version) || (gtk_micro_version != $gtk_config_micro_version)) { printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version, gtk_major_version, gtk_minor_version, gtk_micro_version); printf ("*** was found! If pkg-config was correct, then it is best\n"); printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n"); printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); printf("*** required on your system.\n"); printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n"); printf("*** to point to the correct configuration files\n"); } else if ((gtk_major_version != GTK_MAJOR_VERSION) || (gtk_minor_version != GTK_MINOR_VERSION) || (gtk_micro_version != GTK_MICRO_VERSION)) { printf("*** GTK+ header files (version %d.%d.%d) do not match\n", GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION); printf("*** library (version %d.%d.%d)\n", gtk_major_version, gtk_minor_version, gtk_micro_version); } else { if ((gtk_major_version > major) || ((gtk_major_version == major) && (gtk_minor_version > minor)) || ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro))) { return 0; } else { printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n", gtk_major_version, gtk_minor_version, gtk_micro_version); printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n", major, minor, micro); printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n"); printf("***\n"); printf("*** If you have already installed a sufficiently new version, this error\n"); printf("*** probably means that the wrong copy of the pkg-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n"); printf("*** correct copy of pkg-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); } } return 1; } ],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_gtk" = x ; then AC_MSG_RESULT(yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$PKG_CONFIG" = "no" ; then echo "*** A new enough version of pkg-config was not found." echo "*** See http://pkgconfig.sourceforge.net" else if test -f conf.gtktest ; then : else echo "*** Could not run GTK+ test program, checking why..." ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$LIBS $GTK_LIBS" AC_TRY_LINK([ #include #include ], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GTK+ or finding the wrong" echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means GTK+ is incorrectly installed."]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi GTK_CFLAGS="" GTK_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(GTK_CFLAGS) AC_SUBST(GTK_LIBS) rm -f conf.gtktest ]) # Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.10' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.10.2], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.10.2])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 8 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 9 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "GCJ", or "OBJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], UPC, [depcc="$UPC" am_compiler_list=], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. #serial 5 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Autoconf 2.62 quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 8 # AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 13 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.60])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES(OBJC)], [define([AC_PROG_OBJC], defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ]) ]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 3 # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo done .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 5 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_MKDIR_P # --------------- # Check for `mkdir -p'. AC_DEFUN([AM_PROG_MKDIR_P], [AC_PREREQ([2.60])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, dnl while keeping a definition of mkdir_p for backward compatibility. dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of dnl Makefile.ins that do not define MKDIR_P, so we do our own dnl adjustment using top_builddir (which is defined more often than dnl MKDIR_P). AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl case $mkdir_p in [[\\/$]]* | ?:[[\\/]]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of `v7', `ustar', or `pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. AM_MISSING_PROG([AMTAR], [tar]) m4_if([$1], [v7], [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], [m4_case([$1], [ustar],, [pax],, [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' _am_tools=${am_cv_prog_tar_$1-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and # Solaris sh will not grok spaces in the rhs of `-'. for _am_tool in $_am_tools do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR m4_include([m4/codeset.m4]) m4_include([m4/gettext.m4]) m4_include([m4/glibc21.m4]) m4_include([m4/iconv.m4]) m4_include([m4/intdiv0.m4]) m4_include([m4/inttypes-pri.m4]) m4_include([m4/inttypes.m4]) m4_include([m4/inttypes_h.m4]) m4_include([m4/isc-posix.m4]) m4_include([m4/lcmessage.m4]) m4_include([m4/lib-ld.m4]) m4_include([m4/lib-link.m4]) m4_include([m4/lib-prefix.m4]) m4_include([m4/nls.m4]) m4_include([m4/po.m4]) m4_include([m4/progtest.m4]) m4_include([m4/stdint_h.m4]) m4_include([m4/uintmax_t.m4]) m4_include([m4/ulonglong.m4]) kasumi-2.5/configure.in0000644000175000017500000000263611226526346012121 00000000000000dnl Process this file with autoconf to produce a configure script. AC_INIT(main.cxx, 2.0) AM_INIT_AUTOMAKE(kasumi, 2.5) AM_CONFIG_HEADER(config.h) dnl Checks for programs. AC_PROG_CC AC_PROG_CXX dnl Checks for gettext ALL_LINGUAS="ja it" AM_GNU_GETTEXT dnl LDFLAGS="$LDFLAGS $INTLLIBS" dnl localedir='${prefix}/share/locale' dnl AC_SUBST(localedir) dnl AC_DEFINE(HAVE_CATGETS, 1,Define as 1 if you have catgets and don't want to use GNU gettext.) dnl AC_DEFINE(HAVE_GETTEXT, 1, Define as 1 if you have GNU gettext.) dnl AC_DEFINE(HAVE_LC_MESSAGES, 1, Define as 1 if you have LC_MESSAGES.) dnl AC_DEFINE(HAVE_STPCPY, 1, Define as 1 if you have stpcpy() function.) dnl AC_DEFINE(ENABLE_NLS, 1, Define as 1 if you want to use NLS.) AM_ICONV if test "x$am_cv_func_iconv" != "xyes"; then AC_MSG_ERROR([Unable to find iconv(). iconv() is needed for Kasumi]) fi dnl Checks for libraries. AM_PATH_GTK_2_0(2.6.0, CFLAGS="$CFLAGS $GTK_CFLAGS" CPPFLAGS="$CPPFLAGS $GTK_CFLAGS" LIBS="$LIBS $GTK_LIBS", AC_MSG_ERROR(GTK+ >= 2.6.0 not found.)) AC_CHECK_LIB(iconv, iconv) AC_CHECK_LIB(anthydic, anthy_dic_util_init) AC_CHECK_LIB(anthy, anthy_get_version_string) CFLAGS="$CFLAGS -Wall" CXXFLAGS="$CXXFLAGS -Wall" dnl Checks for header files. dnl Checks for typedefs, structures, and compiler characteristics. dnl Checks for library functions. AC_CONFIG_FILES([ kasumi.desktop ]) AC_OUTPUT(Makefile intl/Makefile po/Makefile.in m4/Makefile ) kasumi-2.5/main.cxx0000644000175000017500000001634511226545147011262 00000000000000/********************************************************************* * * main.cxx * * Kasumi - a management tool for a private dictionary of anthy * * Copyright (C) 2004-2006 Takashi Nakamoto * Copyright (C) 2005 Takuro Ashie * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. * *********************************************************************/ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include #include #include #include #include #include "KasumiDic.hxx" #include "KasumiMainWindow.hxx" #include "KasumiAddWindow.hxx" #include "KasumiConfiguration.hxx" #include "KasumiException.hxx" #include "intl.h" extern "C"{ // ad-hoc solution for a defect of Anthy #include #include } using namespace std; void showHelp(){ cout << "Usage: kasumi [option]" << endl; cout << "Option:" << endl; cout << " -h --help Show this message." << endl; cout << " -v --version Show Kasumi's version and copyright" << endl;; cout << " information" << endl; cout << " -m --manage Run Kasumi in Manage mode." << endl; cout << " You may abbreviate this option." << endl; cout << " -a --add Run Kasumi in Add mode." << endl; cout << " -e --exclusive Run Kasumi in Exclusive mode." << endl; cout << " --sound val Set default sound entry (only in Add mode)" << endl; cout << " --spelling val Set default spelling entry (only in Add mode)" << endl; cout << " --wordclass val Set default word class entry (only in Add mode)" << endl; // cout << " -x val Set default horizontal window position" << endl; // cout << " -y val Set default vertical window position" << endl; cout << " -i --import Import selected text as a spelling" << endl; cout << " -I --ignore Ignore selected text" << endl; #ifdef HAS_ANTHY_DICUTIL_SET_ENCODING cout << " -E --eucjp Use EUC-JP encoding for dictionary" << endl; #endif // HAS_ANTHY_DICUTIL_SET_ENCODING cout << endl; } void showVersion(){ cout << "Kasumi " << VERSION << " - a personal dictionary manager for Anthy" << endl; cout << "Copyright (C) 2004-2006 Takashi Nakamoto.\n"; cout << "This program comes with NO WARRANTY, to the extent permitted " \ "by law. \nYou may redistribute it under the terms of the GNU " \ "General Public License; \nsee the file named COPYING for " \ "details."; cout << endl; } enum { TARGET_STRING }; static GtkTargetEntry targets[]={ {"STRING", 0, TARGET_STRING}, }; static GdkAtom atom0; /* for checking process */ static GdkAtom atom1; /* for sending arguments */ static gchar *arg_text = NULL; static gint instance = -1; static void cb_selection_get(GtkWidget *widget, GtkSelectionData *data, guint info, guint time, GtkWidget *window) { gchar *text = NULL; gint length = 0; if (data->selection == atom0) { text = "Kasumi Selection"; length = strlen(text); gtk_selection_convert(window, atom1, GDK_SELECTION_TYPE_STRING, GDK_CURRENT_TIME); } else if (data->selection == atom1 && arg_text != NULL) { text = arg_text; arg_text = NULL; length = strlen(text); } if (text != NULL) { gtk_selection_data_set_text(data, text, length); if (data->selection == atom1) g_free(text); } } static void cb_selection_received(GtkWidget *widget, GtkSelectionData *data, guint time, gpointer user_data) { if (data->selection == atom0) { instance = MAX(data->length, 0); } else if (data->selection == atom1 && data->length > 0) { } } static GtkWidget *check_duplicated_process (int argc, char *argv[]) { GtkWidget *window = gtk_window_new(GTK_WINDOW_TOPLEVEL); gint i, length = 0; gtk_widget_realize(window); atom0 = gdk_atom_intern("Kasumi InterProcess communication 0", FALSE); atom1 = gdk_atom_intern("Kasumi InterProcess communication 1", FALSE); gtk_selection_add_targets(window, atom0, targets, 1); gtk_selection_add_targets(window, atom1, targets, 1); g_signal_connect (window, "selection-get", G_CALLBACK(cb_selection_get), window); g_signal_connect (window, "selection-received", G_CALLBACK(cb_selection_received), window); for (i = 0; i < argc; i++) { gint len; len = strlen(argv[i]) * sizeof(gchar); arg_text = (gchar*) g_realloc(arg_text, length + len + sizeof(gchar)); g_memmove(arg_text + length, argv[i], len); length += len; arg_text[length++] = '\n'; } if (length > 0) { arg_text[length - 1] = '\0'; gtk_selection_owner_set(window, atom1, GDK_CURRENT_TIME); } gtk_selection_convert(window,atom0, GDK_SELECTION_TYPE_STRING, GDK_CURRENT_TIME); while (instance < 0) while (gtk_events_pending()) gtk_main_iteration(); if (instance > 0) { /* Kasumi process already exists */ while (arg_text != NULL) while (gtk_events_pending()) gtk_main_iteration(); gtk_widget_destroy(window); cerr << "Kasumi process already exists." << endl; return NULL; } g_free(arg_text); arg_text = NULL; gtk_selection_owner_set(window, atom0, GDK_CURRENT_TIME); return window; } int main(int argc, char *argv[]) { gtk_init(&argc, &argv); #ifdef ENABLE_NLS // for gettext setlocale(LC_ALL, ""); bindtextdomain(PACKAGE, LOCALEDIR); bind_textdomain_codeset(PACKAGE, "UTF-8"); textdomain(PACKAGE); #endif // #ifdef ENABLE_NLS GtkWidget *server = check_duplicated_process (argc, argv); if (!server) return 0; try{ anthy_dic_util_init(); KasumiWordType::initWordTypeList(); KasumiConfiguration *conf = new KasumiConfiguration(argc, argv); #ifdef HAS_ANTHY_DICUTIL_SET_ENCODING if (conf->getPropertyValueByBool("UseEUCJP")) anthy_dic_util_set_encoding(ANTHY_EUC_JP_ENCODING); else anthy_dic_util_set_encoding(ANTHY_UTF8_ENCODING); #endif // HAS_ANTHY_DICUTIL_SET_ENCODING KasumiDic *dic = new KasumiDic(conf); string startupMode = conf->getPropertyValue("StartupMode"); if(startupMode == string("HELP")){ showHelp(); }else if(startupMode == string("VERSION")){ showVersion(); }else if(startupMode == string("MANAGE")){ new KasumiMainWindow(dic,conf); gtk_main(); }else if(startupMode == string("ADD")){ new KasumiAddWindow(dic,conf); gtk_main(); }else if(startupMode == string("EXCLUSIVE")){ new KasumiAddWindow(dic,conf); gtk_main(); } }catch(KasumiException e){ handleException(e); } gtk_widget_destroy (server); return 0; } kasumi-2.5/config.sub0000755000175000017500000007320310142036015011552 00000000000000#! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003 Free Software Foundation, Inc. timestamp='2003-07-17' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software # can handle that machine. It does not imply ALL GNU software can. # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, # Boston, MA 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS $0 [OPTION] ALIAS Canonicalize a configuration name. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit 0 ;; --version | -v ) echo "$version" ; exit 0 ;; --help | --h* | -h ) echo "$usage"; exit 0 ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo $1 exit 0;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | kfreebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis) os= basic_machine=$1 ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ | m32r | m68000 | m68k | m88k | mcore \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ | mips64vr | mips64vrel \ | mips64orion | mips64orionel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa64 | mipsisa64el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ | msp430 \ | ns16k | ns32k \ | openrisc | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ | strongarm \ | tahoe | thumb | tic4x | tic80 | tron \ | v850 | v850e \ | we32k \ | x86 | xscale | xstormy16 | xtensa \ | z8k) basic_machine=$basic_machine-unknown ;; m6811 | m68hc11 | m6812 | m68hc12) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* \ | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ | clipper-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ | m32r-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | mcore-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ | mips64vr-* | mips64vrel-* \ | mips64orion-* | mips64orionel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa64-* | mipsisa64el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipstx39-* | mipstx39el-* \ | msp430-* \ | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* \ | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ | tahoe-* | thumb-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tron-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ | xtensa-* \ | ymp-* \ | z8k-*) ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-unknown os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amd64) basic_machine=x86_64-pc ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; c90) basic_machine=c90-cray os=-unicos ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | j90) basic_machine=j90-cray os=-unicos ;; crds | unos) basic_machine=m68k-crds ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; decsystem10* | dec10*) basic_machine=pdp10-dec os=-tops10 ;; decsystem20* | dec20*) basic_machine=pdp10-dec os=-tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppa-next) os=-nextstep3 ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; # I'm not sure what "Sysv32" means. Should this be sysv3.2? i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; i386-vsta | vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m88k-omron*) basic_machine=m88k-omron ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; mingw32) basic_machine=i386-pc os=-mingw32 ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; mmix*) basic_machine=mmix-knuth os=-mmixware ;; monitor) basic_machine=m68k-rom68k os=-coff ;; morphos) basic_machine=powerpc-unknown os=-morphos ;; msdos) basic_machine=i386-pc os=-msdos ;; mvs) basic_machine=i370-ibm os=-mvs ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; nv1) basic_machine=nv1-cray os=-unicosmp ;; nsr-tandem) basic_machine=nsr-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; or32 | or32-*) basic_machine=or32-unknown os=-coff ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; pentium4) basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium4-*) basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc) basic_machine=powerpc-unknown ;; ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; s390 | s390-*) basic_machine=s390-ibm ;; s390x | s390x-*) basic_machine=s390x-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sb1) basic_machine=mipsisa64sb1-unknown ;; sb1el) basic_machine=mipsisa64sb1el-unknown ;; sei) basic_machine=mips-sei os=-seiux ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sh64) basic_machine=sh64-unknown ;; sparclite-wrs | simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=alphaev5-cray os=-unicos ;; t90) basic_machine=t90-cray os=-unicos ;; tic54x | c54x*) basic_machine=tic54x-unknown os=-coff ;; tic55x | c55x*) basic_machine=tic55x-unknown os=-coff ;; tic6x | c6x*) basic_machine=tic6x-unknown os=-coff ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; toad1) basic_machine=pdp10-xkl os=-tops20 ;; tower | tower-32) basic_machine=m68k-ncr ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; xps | xps100) basic_machine=xps100-honeywell ;; ymp) basic_machine=ymp-cray os=-unicos ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; romp) basic_machine=romp-ibm ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp10) # there are many clones, so DEC is not a safe bet basic_machine=pdp10-unknown ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; sh64) basic_machine=sh64-unknown ;; sparc | sparcv9 | sparcv9b) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -svr4*) os=-sysv4 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -netbsd* | -openbsd* | -kfreebsd* | -freebsd* | -riscix* \ | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto-qnx*) ;; -nto*) os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -wince*) os=-wince ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -atheos*) os=-atheos ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -nova*) os=-rtmk-nova ;; -ns2 ) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -es1800*) os=-ose ;; -xenix) os=-xenix ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -aros*) os=-aros ;; -kaos*) os=-kaos ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; c4x-* | tic4x-*) os=-coff ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 # This also exists in the configure program, but was not the # default. # os=-sunos4 ;; m68*-cisco) os=-aout ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; or32-*) os=-coff ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-be) os=-beos ;; *-ibm) os=-aix ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next ) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -ptx*) vendor=sequent ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: kasumi-2.5/config.rpath0000755000175000017500000003521710142036015012102 00000000000000#! /bin/sh # Output a system dependent set of variables, describing how to set the # run time search path of shared libraries in an executable. # # Copyright 1996-2003 Free Software Foundation, Inc. # Taken from GNU libtool, 2001 # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # # The first argument passed to this file is the canonical host specification, # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld # should be set by the caller. # # The set of defined variables is at the end of this script. # Known limitations: # - On IRIX 6.5 with CC="cc", the run time search patch must not be longer # than 256 bytes, otherwise the compiler driver will dump core. The only # known workaround is to choose shorter directory names for the build # directory and/or the installation directory. # All known linkers require a `.a' archive for static linking (except M$VC, # which needs '.lib'). libext=a shrext=.so host="$1" host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` # Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC. wl= if test "$GCC" = yes; then wl='-Wl,' else case "$host_os" in aix*) wl='-Wl,' ;; mingw* | pw32* | os2*) ;; hpux9* | hpux10* | hpux11*) wl='-Wl,' ;; irix5* | irix6* | nonstopux*) wl='-Wl,' ;; newsos6) ;; linux*) case $CC in icc|ecc) wl='-Wl,' ;; ccc) wl='-Wl,' ;; esac ;; osf3* | osf4* | osf5*) wl='-Wl,' ;; sco3.2v5*) ;; solaris*) wl='-Wl,' ;; sunos4*) wl='-Qoption ld ' ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) wl='-Wl,' ;; sysv4*MP*) ;; uts4*) ;; esac fi # Code taken from libtool.m4's AC_LIBTOOL_PROG_LD_SHLIBS. hardcode_libdir_flag_spec= hardcode_libdir_separator= hardcode_direct=no hardcode_minus_L=no case "$host_os" in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; openbsd*) with_gnu_ld=no ;; esac ld_shlibs=yes if test "$with_gnu_ld" = yes; then case "$host_os" in aix3* | aix4* | aix5*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs=no fi ;; amigaos*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we can use # them. ld_shlibs=no ;; beos*) if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; cygwin* | mingw* | pw32*) # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then : else ld_shlibs=no fi ;; netbsd*) ;; solaris* | sysv5*) if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then ld_shlibs=no elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; sunos4*) hardcode_direct=yes ;; *) if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = yes; then # Unlike libtool, we use -rpath here, not --rpath, since the documented # option of GNU ld is called -rpath, not --rpath. hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' fi else case "$host_os" in aix3*) # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix4* | aix5*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix5*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done esac fi hardcode_direct=yes hardcode_libdir_separator=':' if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 hardcode_direct=yes else # We have old collect2 hardcode_direct=unsupported hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi esac fi # Begin _LT_AC_SYS_LIBPATH_AIX. echo 'int main () { return 0; }' > conftest.c ${CC} ${LDFLAGS} conftest.c -o conftest aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } }'` if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } }'` fi if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib" fi rm -f conftest.c conftest # End _LT_AC_SYS_LIBPATH_AIX. if test "$aix_use_runtimelinking" = yes; then hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' else hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" fi fi ;; amigaos*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # see comment about different semantics on the GNU ld section ld_shlibs=no ;; bsdi4*) ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec=' ' libext=lib ;; darwin* | rhapsody*) if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then hardcode_direct=no fi ;; dgux*) hardcode_libdir_flag_spec='-L$libdir' ;; freebsd1*) ld_shlibs=no ;; freebsd2.2*) hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes ;; freebsd2*) hardcode_direct=yes hardcode_minus_L=yes ;; freebsd*) hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes ;; hpux9*) hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; hpux10* | hpux11*) if test "$with_gnu_ld" = no; then case "$host_cpu" in hppa*64*) hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=no ;; ia64*) hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=no # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; *) hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; netbsd*) hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes ;; newsos6) hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; openbsd*) hardcode_direct=yes if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then hardcode_libdir_flag_spec='${wl}-rpath,$libdir' else case "$host_os" in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) hardcode_libdir_flag_spec='-R$libdir' ;; *) hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; osf3*) hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) if test "$GCC" = yes; then hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else # Both cc and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi hardcode_libdir_separator=: ;; sco3.2v5*) ;; solaris*) hardcode_libdir_flag_spec='-R$libdir' ;; sunos4*) hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes ;; sysv4) case $host_vendor in sni) hardcode_direct=yes # is this really true??? ;; siemens) hardcode_direct=no ;; motorola) hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac ;; sysv4.3*) ;; sysv4*MP*) if test -d /usr/nec; then ld_shlibs=yes fi ;; sysv4.2uw2*) hardcode_direct=yes hardcode_minus_L=no ;; sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) ;; sysv5*) hardcode_libdir_flag_spec= ;; uts4*) hardcode_libdir_flag_spec='-L$libdir' ;; *) ld_shlibs=no ;; esac fi # Check dynamic linker characteristics # Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER. libname_spec='lib$name' case "$host_os" in aix3*) ;; aix4* | aix5*) ;; amigaos*) ;; beos*) ;; bsdi4*) ;; cygwin* | mingw* | pw32*) shrext=.dll ;; darwin* | rhapsody*) shrext=.dylib ;; dgux*) ;; freebsd1*) ;; freebsd*) ;; gnu*) ;; hpux9* | hpux10* | hpux11*) case "$host_cpu" in ia64*) shrext=.so ;; hppa*64*) shrext=.sl ;; *) shrext=.sl ;; esac ;; irix5* | irix6* | nonstopux*) case "$host_os" in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; *) libsuff= shlibsuff= ;; esac ;; esac ;; linux*oldld* | linux*aout* | linux*coff*) ;; linux*) ;; netbsd*) ;; newsos6) ;; nto-qnx) ;; openbsd*) ;; os2*) libname_spec='$name' shrext=.dll ;; osf3* | osf4* | osf5*) ;; sco3.2v5*) ;; solaris*) ;; sunos4*) ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ;; sysv4*MP*) ;; uts4*) ;; esac sed_quote_subst='s/\(["`$\\]\)/\\\1/g' escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` shlibext=`echo "$shrext" | sed -e 's,^\.,,'` escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' < * preparation for release (ver 2.5) 2009-07-21 Takuro Ashie * fix: - Fix paddings in the KasumiAddWindow. 2009-07-16 Takuro Ashie * fix: - Use stock objects for buttons on KasumiAddWindow. - Remove neeldless key accelerators for KasumiAddWindow. 2009-07-16 Takuro Ashie * fix: - Fix paddings in the main window. - Fix minimum size of columns in the word list view. - Remove needless key accelerators in main window. Use mnemonic instead. - Remove some needless codes. 2009-07-13 Takuro Ashie * fix: - Fix a compile time warning. - Rename some strang variable names. 2009-07-13 Takuro Ashie * enhancement: - Added some word type subcategories. Thanks to Jun Oizumi. 2009-06-25 Takuro Ashie * fix - Kill duplicated Ikuya Awashiro in man page! Thanks to Jun Oizumi. 2009-06-25 Takuro Ashie * fix - Remove "SIKU" conjugation. Thanks to Jun Oizumi. 2009-01-29 Takuro Ashie * preparation for release (ver 2.4) 2009-01-20 Ikuya Awashiro * KasumiAddWindow.cxx: - addded an include file. Thanks to Mike Fabian. * KasumiWord.cxx: - DITTO. * main.cxx: - DITTO. 2009-01-20 Takuro Ashie * enhancement: - Support ANTHY_UTF8_ENCODING and set it as default. You can switch to ANTHY_EUC_JP_ENCODING by -E or --eucjp option. 2007-10-30 Ikuya Awashiro * fix: - FTBFS with GCC 4.3: missing #includes http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=417266 Thaks to Martin Michlmayr . - kasumi dumps core on x86_64 systems when trying to add new words to the dictionary https://bugzilla.novell.com/show_bug.cgi?id=253788 Thanks to Mike Fabian. - fail in the judgment of the version. http://kasumi.sourceforge.jp/index.php?%A5%D0%A5%B0%CA%F3%B9%F0%2F95 Thanks to dtana. * preparation for release (ver 2.3) 2006-11-29 Takashi Nakamoto * preparation for release (ver 2.2) 2006-11-28 Takashi Nakamoto * enhancement: - change the text color on the search entry box if Kasumi failed to find specified text - ask Gtk+ library to keep above the exclusive mode window * fix: - scroll to the undermost of the view after adding a new word 2006-11-27 Takashi Nakamoto * fix: - the bug raised while sorting 2006-10-15 Takashi Nakamoto * enhancement: - add exclusive mode 2006-10-14 Ikuya Awashiro * configure.in: 2.1 * This release is a result at the CodeFest Kyoto 2006 hosted by FSIJ. 2006-10-14 Takashi Nakamoto * enhancement: - add new word type category combo box * fix: - export embedded string to po files - changed adding window title - remove unnecessary words - improve portability - support dakuon mark 2006-06-28 Takashi Nakamoto * fix: AUTHORS - reconstruction of AUTHORS file - added Italian l10n team 2006-06-26 Takashi Nakamoto * fix: KasumiException.cxx - security fix * fix: KasumiDicEventListener.hxx KasumiWordEventListener.hxx - add virtual destructor to avoid compilation warnings * fix: configure.in main.cxx Makefile.am acconfig.h - removed acconfig.h deprecated in autoconf 2.5 - correctly handling "--disable-nls" option on no-glibc platform - thanks to Diego's patch * fix: AUTHORS - typo of my email address :( 2006-06-25 Takashi Nakamoto * fix: KasumiAddWindow.cxx po/*.po po/*.pot - fixed typo: "Invlid" -> "Invalid" * New feature: - Italian localization 2006-06-23 Ikuya Awashiro * KasumiMainWindow.hxx: - fixed compile error on gcc 4.1. thanks to sgtom. 2006-06-21 Takashi Nakamoto * fix: configure.in - require Gtk+ version is 2.6 or higher for GtkCellRendererCombo 2006-06-20 Takashi Nakamoto * fix: KasumiDic.cxx - fix the defect that Kasumi failes when the private dictionary doesn't have any word. 2006-06-03 Ikuya Awashiro * kasumi.desktop.in: - added. * Makefile.am, configure.in: - resistered in GNOME/K menu. 2006-06-02 Ikuya Awashiro * Makefile.am: - kasumi.png was placed in /usr/share/pixmaps instead /usr/share/kasumi. - add man page. * kasumi.1: - added. 2006-05-29 Takashi Nakamoto * preparation for release (ver 2.0) * fix: KasumiWord.cxx, configure.in - accept ASCII character in sound entries * fix: AUTHORS - add Ikuya to AUTHORS * fix: POTFILES.in ja.po - translated newly created message * enhancement: KasumiMainWindow.cxx KasumiMainWindow.hxx - obsolete "Add Mode" button 2006-05-28 Takashi Nakamoto * fix: main.cxx - changed copyright notice * fix: KasumiWordType.hxx, KasumiWord.cxx - don't issue modification event when the same value are set 2006-05-27 Takashi Nakamoto * fix: KasumiDic.cxx, KasumiWordType.cxx - set an alternative word type if specified one does not exist - measures against an anthy's defect that it returns error code even when it is right and no word is registered. * fix: - inserted copyright and license terms into the head of each source file or header file. * fix: KasumiAddWindow.cxx - changed the page size of the spin button 2006-05-17 Takashi Nakamoto * fix: KasumiDic.cxx - change the condition of anthy version 2006-05-14 Takashi Nakamoto * fix - KasumiAddWindow - search function for KasumiMainWindow * enhancement - implement of KasumiWordEventListener 2006-05-7 Takashi Nakamoto * drastic changes for new version 2.0 2006-03-26 Ikuya Awashiro * KasumiMainWindow.hxx, KasumiAddWindow.hxx: Fixed with G++ 4.1: friends not declared Thanks to Martin Michlmayr 2005-12-06 Takashi Nakamoto * preparation for release (ver 1.0) * fix - rearrangement of some manuals 2005-12-01 Takashi Nakamoto * enhancement - Output notification when duplicated process was found. 2005-11-30 Takuro Ashie * enhancement - Check duplicated process. 2005-11-22 Takashi Nakamoto * obolete - DefaultWindowPosX and DefaultWindowPosY option 2005-11-08 Takashi Nakamoto * fix (KasumiString.cxx) - load words including "=" properly 2005-10-15 Takuro Ashie * KasumiMainWindow.cxx, KasumiAddWindow.cxx: Set default window position to GTK_WIN_POS_MOUSE. If you feel unpleasant, please revert it. 2005-10-15 Takashi Nakamoto * fix - request >=gtk2.4.0 for GTK_COMBO_BOX 2005-09-19 Takashi Nakamoto * preparation for release (ver 0.10) 2005-09-07 Takashi Nakamoto * fix - No save, when add a new word in adding mode 2005-09-05 Takashi Nakamoto * enhancement - tooltips for adding window - obsolete KasumiOutOfBoundException - make columns resizable 2005-09-01 Takashi Nakamoto * fix - changed exception handling system * fix (in KasumiAddWindow.cxx) - wrong string for verb option 2005-08-29 Takashi Nakamoto * enhancement - make adding mode buttons not to display string for neat appearance * enhancement - sort function for word class * enhancement - sort function for sound * enhancement make typical buttons to use stock 2005-08-23 Takashi Nakamoto * feature - sort function ( Just supporting sorting by frequency only because it is still experiment. ) * enhancement - a new option to ignore X selection thanks to nubata http://kasumi.sourceforge.jp/index.php?%A5%D0%A5%B0%CA%F3%B9%F0%2F50 2005-06-02 Takashi Nakamoto * fix (in KasumiString.cxx) - avoid comparison with unsigned int value and "npos" ("npos" can be negative value 2005-05-27 Takashi Nakamoto * preparation for release (ver 0.9) * fix - verb can be registered only with anthy 6131 or later 2005-05-23 Takashi Nakamoto * fix - changed behavior when changing a word class in adding mode not to jump to unconcerned position * enhancement - Verb registration support 2005-05-18 Takashi Nakamoto * enhancement - save dictionary when "Add" button clicked in "Adding" mode * fix - typo: "versoin" -> "version" - type definition "size_type" -> "string::size_type" - for http://kasumi.sourceforge.jp/index?%A5%D0%A5%B0%CA%F3%B9%F0%2F45 thanks to pinkmonkey http://d.hatena.ne.jp/pinkmonkey/20050411 2005-04-11 Takashi Nakamoto * fix - avoid comparison with unsigned int value and "npos" ("npos" can be negative value) 2005-04-08 Takashi Nakamoto * fix - make the button in adding window smaller * preparation for release (ver 0.8) 2005-04-07 Takashi Nakamoto * fix - trivial change for no-warning compilation 2005-04-06 Takashi Nakamoto * New feature - When Kasumi is launched in adding mode, the selected utf8 string will be set in the spelling entry * fix - to enable "--version" and "--help" option 2005-04-04 Takashi Nakamoto * fix - updated automake version from 1.4 to 1.7.9 - updated autoconf version from 2.13 to 2.59 2005-04-02 Takashi Nakamoto * fix - revise UI for adding new word 2005-03-02 Takashi Nakamoto * New feature - A new icon for Kasumi (kasumi.png) It will be installed in /usr/local/share/kasumi/ by default * fix - launch correctly unless ~/.anthy directory exists 2005-03-01 Takashi Nakamoto * fix - typo * fix - solved inability to change mode * fix - change the type of 'i' to be compared with 'npos' from unsigned int to (signed) int because npos can be negative value in x86_64 machine. 2005-01-31 Takashi Nakamoto * fix - quit correctly when close button clicked 2005-01-08 Takashi Nakamoto * fix - do not accept non-Hiragana character in Sound entry 2005-01-07 Takashi Nakamoto * New feature - mode switch 2005-01-06 Takashi Nakamoto * fix - validate method for configurations 2004-12-30 Takashi Nakamoto * preparation for release (ver 0.7) 2004-12-28 Takashi Nakamoto * New feature - incremental search 2004-12-27 Takashi Nakamoto * New feature - configuration option for default window position 2004-12-21 Takashi Nakamoto * New feature - flexible default values in various fields 2004-12-20 Takashi Nakamoto * New feature - shortcut key configuration * New feature - Users can change default/maximum/minimum frequency value - Remove "Add" button and add "New Word" button 2004-12-08 Takashi Nakamoto * New feature - configuration framework 2004-12-07 Takashi Nakamoto * KasumiMainWindow.cxx: Feature - default status of prefix search is set checked 2004-12-02 Takashi Nakamoto * main.cxx: Fix - fix argument handling codes to resolve segumentation fault which rises if wrong argument (such as "--ad") specified. - remove the message about dictionary file reading from output string which displayed when "--help" option specified 2004-11-27 Takashi Nakamoto * Fix - trivial code and comment change for easy code reading 2004-11-26 Takashi Nakamoto * KasumiAddWindow.cxx: New feature - shortcut key for add window * KasumiAddWindow:cxx: Fix - to resize add window acorrding to content size 2004-11-25 Takashi Nakamoto * New feature - Shortcut key * Fix - trivial change for Changed* methods' argument 2004-11-14 Takashi Nakamoto * Fix - trivial change for temporary file * New feature - prefix search function 2004-11-12 Takashi Nakamoto * Fix - adjust default frequency value and upper bounds 2004-11-10 Takashi Nakamoto * New feature - search function (complete version) 2004-11-10 Takashi Nakamoto * KasumiDic.cxx: Load dictionary directly from "anthy-dic-tool --dump" storing into temporary file. If user removed word, it will be removed correctly from Anthy's internal dictionary. * Solved some compile warnings * KasumiMainWindow.cxx: changed add word operation. * New feature - search function (test version) 2004-11-05 Takashi Nakamoto * New feature - Add Window. 2004-11-03 Takashi Nakamoto * New version of Kasumi rewritten by C++. * KasumiMainWindow.cxx: New option pane for noun and adverbs. kasumi-2.5/m4/0000777000175000017500000000000011231307557010202 500000000000000kasumi-2.5/m4/glibc21.m40000644000175000017500000000172710142036016011577 00000000000000# glibc21.m4 serial 2 (fileutils-4.1.3, gettext-0.10.40) dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. # Test for the GNU C Library, version 2.1 or newer. # From Bruno Haible. AC_DEFUN([jm_GLIBC21], [ AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer, ac_cv_gnu_library_2_1, [AC_EGREP_CPP([Lucky GNU user], [ #include #ifdef __GNU_LIBRARY__ #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2) Lucky GNU user #endif #endif ], ac_cv_gnu_library_2_1=yes, ac_cv_gnu_library_2_1=no) ] ) AC_SUBST(GLIBC21) GLIBC21="$ac_cv_gnu_library_2_1" ] ) kasumi-2.5/m4/iconv.m40000644000175000017500000000665310142036016011475 00000000000000# iconv.m4 serial AM4 (gettext-0.11.3) dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl From Bruno Haible. AC_DEFUN([AM_ICONV_LINKFLAGS_BODY], [ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV dnl accordingly. AC_LIB_LINKFLAGS_BODY([iconv]) ]) AC_DEFUN([AM_ICONV_LINK], [ dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and dnl those with the standalone portable GNU libiconv installed). dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV dnl accordingly. AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) dnl Add $INCICONV to CPPFLAGS before performing the following checks, dnl because if the user has installed libiconv and not disabled its use dnl via --without-libiconv-prefix, he wants to use it. The first dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed. am_save_CPPFLAGS="$CPPFLAGS" AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV]) AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [ am_cv_func_iconv="no, consider installing GNU libiconv" am_cv_lib_iconv=no AC_TRY_LINK([#include #include ], [iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd);], am_cv_func_iconv=yes) if test "$am_cv_func_iconv" != yes; then am_save_LIBS="$LIBS" LIBS="$LIBS $LIBICONV" AC_TRY_LINK([#include #include ], [iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd);], am_cv_lib_iconv=yes am_cv_func_iconv=yes) LIBS="$am_save_LIBS" fi ]) if test "$am_cv_func_iconv" = yes; then AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.]) fi if test "$am_cv_lib_iconv" = yes; then AC_MSG_CHECKING([how to link with libiconv]) AC_MSG_RESULT([$LIBICONV]) else dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV dnl either. CPPFLAGS="$am_save_CPPFLAGS" LIBICONV= LTLIBICONV= fi AC_SUBST(LIBICONV) AC_SUBST(LTLIBICONV) ]) AC_DEFUN([AM_ICONV], [ AM_ICONV_LINK if test "$am_cv_func_iconv" = yes; then AC_MSG_CHECKING([for iconv declaration]) AC_CACHE_VAL(am_cv_proto_iconv, [ AC_TRY_COMPILE([ #include #include extern #ifdef __cplusplus "C" #endif #if defined(__STDC__) || defined(__cplusplus) size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); #else size_t iconv(); #endif ], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const") am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` AC_MSG_RESULT([$]{ac_t:- }[$]am_cv_proto_iconv) AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1, [Define as const if the declaration of iconv() needs const.]) fi ]) kasumi-2.5/m4/intdiv0.m40000644000175000017500000000356510142036016011733 00000000000000# intdiv0.m4 serial 1 (gettext-0.11.3) dnl Copyright (C) 2002 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl From Bruno Haible. AC_DEFUN([gt_INTDIV0], [ AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_CACHE_CHECK([whether integer division by zero raises SIGFPE], gt_cv_int_divbyzero_sigfpe, [ AC_TRY_RUN([ #include #include static void #ifdef __cplusplus sigfpe_handler (int sig) #else sigfpe_handler (sig) int sig; #endif { /* Exit with code 0 if SIGFPE, with code 1 if any other signal. */ exit (sig != SIGFPE); } int x = 1; int y = 0; int z; int nan; int main () { signal (SIGFPE, sigfpe_handler); /* IRIX and AIX (when "xlc -qcheck" is used) yield signal SIGTRAP. */ #if (defined (__sgi) || defined (_AIX)) && defined (SIGTRAP) signal (SIGTRAP, sigfpe_handler); #endif /* Linux/SPARC yields signal SIGILL. */ #if defined (__sparc__) && defined (__linux__) signal (SIGILL, sigfpe_handler); #endif z = x / y; nan = y / y; exit (1); } ], gt_cv_int_divbyzero_sigfpe=yes, gt_cv_int_divbyzero_sigfpe=no, [ # Guess based on the CPU. case "$host_cpu" in alpha* | i[34567]86 | m68k | s390*) gt_cv_int_divbyzero_sigfpe="guessing yes";; *) gt_cv_int_divbyzero_sigfpe="guessing no";; esac ]) ]) case "$gt_cv_int_divbyzero_sigfpe" in *yes) value=1;; *) value=0;; esac AC_DEFINE_UNQUOTED(INTDIV0_RAISES_SIGFPE, $value, [Define if integer division by zero raises signal SIGFPE.]) ]) kasumi-2.5/m4/stdint_h.m40000644000175000017500000000205310142036016012161 00000000000000# stdint_h.m4 serial 3 (gettext-0.12) dnl Copyright (C) 1997-2003 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl From Paul Eggert. # Define HAVE_STDINT_H_WITH_UINTMAX if exists, # doesn't clash with , and declares uintmax_t. AC_DEFUN([jm_AC_HEADER_STDINT_H], [ AC_CACHE_CHECK([for stdint.h], jm_ac_cv_header_stdint_h, [AC_TRY_COMPILE( [#include #include ], [uintmax_t i = (uintmax_t) -1;], jm_ac_cv_header_stdint_h=yes, jm_ac_cv_header_stdint_h=no)]) if test $jm_ac_cv_header_stdint_h = yes; then AC_DEFINE_UNQUOTED(HAVE_STDINT_H_WITH_UINTMAX, 1, [Define if exists, doesn't clash with , and declares uintmax_t. ]) fi ]) kasumi-2.5/m4/nls.m40000644000175000017500000000350510142036016011144 00000000000000# nls.m4 serial 1 (gettext-0.12) dnl Copyright (C) 1995-2003 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl dnl This file can can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: dnl Ulrich Drepper , 1995-2000. dnl Bruno Haible , 2000-2003. AC_DEFUN([AM_NLS], [ AC_MSG_CHECKING([whether NLS is requested]) dnl Default is enabled NLS AC_ARG_ENABLE(nls, [ --disable-nls do not use Native Language Support], USE_NLS=$enableval, USE_NLS=yes) AC_MSG_RESULT($USE_NLS) AC_SUBST(USE_NLS) ]) AC_DEFUN([AM_MKINSTALLDIRS], [ dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly dnl find the mkinstalldirs script in another subdir but $(top_srcdir). dnl Try to locate it. MKINSTALLDIRS= if test -n "$ac_aux_dir"; then case "$ac_aux_dir" in /*) MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ;; *) MKINSTALLDIRS="\$(top_builddir)/$ac_aux_dir/mkinstalldirs" ;; esac fi if test -z "$MKINSTALLDIRS"; then MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" fi AC_SUBST(MKINSTALLDIRS) ]) kasumi-2.5/m4/codeset.m40000644000175000017500000000157610142036016012004 00000000000000# codeset.m4 serial AM1 (gettext-0.10.40) dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl From Bruno Haible. AC_DEFUN([AM_LANGINFO_CODESET], [ AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset, [AC_TRY_LINK([#include ], [char* cs = nl_langinfo(CODESET);], am_cv_langinfo_codeset=yes, am_cv_langinfo_codeset=no) ]) if test $am_cv_langinfo_codeset = yes; then AC_DEFINE(HAVE_LANGINFO_CODESET, 1, [Define if you have and nl_langinfo(CODESET).]) fi ]) kasumi-2.5/m4/gettext.m40000644000175000017500000004052110142036016012033 00000000000000# gettext.m4 serial 20 (gettext-0.12) dnl Copyright (C) 1995-2003 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl dnl This file can can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: dnl Ulrich Drepper , 1995-2000. dnl Bruno Haible , 2000-2003. dnl Macro to add for using GNU gettext. dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]). dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The dnl default (if it is not specified or empty) is 'no-libtool'. dnl INTLSYMBOL should be 'external' for packages with no intl directory, dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory. dnl If INTLSYMBOL is 'use-libtool', then a libtool library dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static, dnl depending on --{enable,disable}-{shared,static} and on the presence of dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library dnl $(top_builddir)/intl/libintl.a will be created. dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext dnl implementations (in libc or libintl) without the ngettext() function dnl will be ignored. If NEEDSYMBOL is specified and is dnl 'need-formatstring-macros', then GNU gettext implementations that don't dnl support the ISO C 99 formatstring macros will be ignored. dnl INTLDIR is used to find the intl libraries. If empty, dnl the value `$(top_builddir)/intl/' is used. dnl dnl The result of the configuration is one of three cases: dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled dnl and used. dnl Catalog format: GNU --> install in $(datadir) dnl Catalog extension: .mo after installation, .gmo in source tree dnl 2) GNU gettext has been found in the system's C library. dnl Catalog format: GNU --> install in $(datadir) dnl Catalog extension: .mo after installation, .gmo in source tree dnl 3) No internationalization, always use English msgid. dnl Catalog format: none dnl Catalog extension: none dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur. dnl The use of .gmo is historical (it was needed to avoid overwriting the dnl GNU format catalogs when building on a platform with an X/Open gettext), dnl but we keep it in order not to force irrelevant filename changes on the dnl maintainers. dnl AC_DEFUN([AM_GNU_GETTEXT], [ dnl Argument checking. ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], , [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT ])])])])]) ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], , [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT ])])])]) define(gt_included_intl, ifelse([$1], [external], [no], [yes])) define(gt_libtool_suffix_prefix, ifelse([$1], [use-libtool], [l], [])) AC_REQUIRE([AM_PO_SUBDIRS])dnl ifelse(gt_included_intl, yes, [ AC_REQUIRE([AM_INTL_SUBDIR])dnl ]) dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) dnl Sometimes libintl requires libiconv, so first search for libiconv. dnl Ideally we would do this search only after the dnl if test "$USE_NLS" = "yes"; then dnl if test "$gt_cv_func_gnugettext_libc" != "yes"; then dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT dnl the configure script would need to contain the same shell code dnl again, outside any 'if'. There are two solutions: dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'. dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE. dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not dnl documented, we avoid it. ifelse(gt_included_intl, yes, , [ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) ]) dnl Set USE_NLS. AM_NLS ifelse(gt_included_intl, yes, [ BUILD_INCLUDED_LIBINTL=no USE_INCLUDED_LIBINTL=no ]) LIBINTL= LTLIBINTL= POSUB= dnl If we use NLS figure out what method if test "$USE_NLS" = "yes"; then gt_use_preinstalled_gnugettext=no ifelse(gt_included_intl, yes, [ AC_MSG_CHECKING([whether included gettext is requested]) AC_ARG_WITH(included-gettext, [ --with-included-gettext use the GNU gettext library included here], nls_cv_force_use_gnu_gettext=$withval, nls_cv_force_use_gnu_gettext=no) AC_MSG_RESULT($nls_cv_force_use_gnu_gettext) nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" if test "$nls_cv_force_use_gnu_gettext" != "yes"; then ]) dnl User does not insist on using GNU NLS library. Figure out what dnl to use. If GNU gettext is available we use this. Else we have dnl to fall back to GNU NLS library. dnl Add a version number to the cache macros. define([gt_api_version], ifelse([$2], [need-formatstring-macros], 3, ifelse([$2], [need-ngettext], 2, 1))) define([gt_cv_func_gnugettext_libc], [gt_cv_func_gnugettext]gt_api_version[_libc]) define([gt_cv_func_gnugettext_libintl], [gt_cv_func_gnugettext]gt_api_version[_libintl]) AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc, [AC_TRY_LINK([#include ]ifelse([$2], [need-formatstring-macros], [#ifndef __GNU_GETTEXT_SUPPORTED_REVISION #define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) #endif changequote(,)dnl typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; changequote([,])dnl ], [])[extern int _nl_msg_cat_cntr; extern int *_nl_domain_bindings;], [bindtextdomain ("", ""); return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_domain_bindings], gt_cv_func_gnugettext_libc=yes, gt_cv_func_gnugettext_libc=no)]) if test "$gt_cv_func_gnugettext_libc" != "yes"; then dnl Sometimes libintl requires libiconv, so first search for libiconv. ifelse(gt_included_intl, yes, , [ AM_ICONV_LINK ]) dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv]) dnl because that would add "-liconv" to LIBINTL and LTLIBINTL dnl even if libiconv doesn't exist. AC_LIB_LINKFLAGS_BODY([intl]) AC_CACHE_CHECK([for GNU gettext in libintl], gt_cv_func_gnugettext_libintl, [gt_save_CPPFLAGS="$CPPFLAGS" CPPFLAGS="$CPPFLAGS $INCINTL" gt_save_LIBS="$LIBS" LIBS="$LIBS $LIBINTL" dnl Now see whether libintl exists and does not depend on libiconv. AC_TRY_LINK([#include ]ifelse([$2], [need-formatstring-macros], [#ifndef __GNU_GETTEXT_SUPPORTED_REVISION #define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) #endif changequote(,)dnl typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; changequote([,])dnl ], [])[extern int _nl_msg_cat_cntr; extern #ifdef __cplusplus "C" #endif const char *_nl_expand_alias ();], [bindtextdomain ("", ""); return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)], gt_cv_func_gnugettext_libintl=yes, gt_cv_func_gnugettext_libintl=no) dnl Now see whether libintl exists and depends on libiconv. if test "$gt_cv_func_gnugettext_libintl" != yes && test -n "$LIBICONV"; then LIBS="$LIBS $LIBICONV" AC_TRY_LINK([#include ]ifelse([$2], [need-formatstring-macros], [#ifndef __GNU_GETTEXT_SUPPORTED_REVISION #define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) #endif changequote(,)dnl typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; changequote([,])dnl ], [])[extern int _nl_msg_cat_cntr; extern #ifdef __cplusplus "C" #endif const char *_nl_expand_alias ();], [bindtextdomain ("", ""); return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)], [LIBINTL="$LIBINTL $LIBICONV" LTLIBINTL="$LTLIBINTL $LTLIBICONV" gt_cv_func_gnugettext_libintl=yes ]) fi CPPFLAGS="$gt_save_CPPFLAGS" LIBS="$gt_save_LIBS"]) fi dnl If an already present or preinstalled GNU gettext() is found, dnl use it. But if this macro is used in GNU gettext, and GNU dnl gettext is already preinstalled in libintl, we update this dnl libintl. (Cf. the install rule in intl/Makefile.in.) if test "$gt_cv_func_gnugettext_libc" = "yes" \ || { test "$gt_cv_func_gnugettext_libintl" = "yes" \ && test "$PACKAGE" != gettext-runtime \ && test "$PACKAGE" != gettext-tools; }; then gt_use_preinstalled_gnugettext=yes else dnl Reset the values set by searching for libintl. LIBINTL= LTLIBINTL= INCINTL= fi ifelse(gt_included_intl, yes, [ if test "$gt_use_preinstalled_gnugettext" != "yes"; then dnl GNU gettext is not found in the C library. dnl Fall back on included GNU gettext library. nls_cv_use_gnu_gettext=yes fi fi if test "$nls_cv_use_gnu_gettext" = "yes"; then dnl Mark actions used to generate GNU NLS library. BUILD_INCLUDED_LIBINTL=yes USE_INCLUDED_LIBINTL=yes LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV" LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV" LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` fi if test "$gt_use_preinstalled_gnugettext" = "yes" \ || test "$nls_cv_use_gnu_gettext" = "yes"; then dnl Mark actions to use GNU gettext tools. CATOBJEXT=.gmo fi ]) if test "$gt_use_preinstalled_gnugettext" = "yes" \ || test "$nls_cv_use_gnu_gettext" = "yes"; then AC_DEFINE(ENABLE_NLS, 1, [Define to 1 if translation of program messages to the user's native language is requested.]) else USE_NLS=no fi fi AC_MSG_CHECKING([whether to use NLS]) AC_MSG_RESULT([$USE_NLS]) if test "$USE_NLS" = "yes"; then AC_MSG_CHECKING([where the gettext function comes from]) if test "$gt_use_preinstalled_gnugettext" = "yes"; then if test "$gt_cv_func_gnugettext_libintl" = "yes"; then gt_source="external libintl" else gt_source="libc" fi else gt_source="included intl directory" fi AC_MSG_RESULT([$gt_source]) fi if test "$USE_NLS" = "yes"; then if test "$gt_use_preinstalled_gnugettext" = "yes"; then if test "$gt_cv_func_gnugettext_libintl" = "yes"; then AC_MSG_CHECKING([how to link with libintl]) AC_MSG_RESULT([$LIBINTL]) AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL]) fi dnl For backward compatibility. Some packages may be using this. AC_DEFINE(HAVE_GETTEXT, 1, [Define if the GNU gettext() function is already present or preinstalled.]) AC_DEFINE(HAVE_DCGETTEXT, 1, [Define if the GNU dcgettext() function is already present or preinstalled.]) fi dnl We need to process the po/ directory. POSUB=po fi ifelse(gt_included_intl, yes, [ dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL dnl to 'yes' because some of the testsuite requires it. if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then BUILD_INCLUDED_LIBINTL=yes fi dnl Make all variables we use known to autoconf. AC_SUBST(BUILD_INCLUDED_LIBINTL) AC_SUBST(USE_INCLUDED_LIBINTL) AC_SUBST(CATOBJEXT) dnl For backward compatibility. Some configure.ins may be using this. nls_cv_header_intl= nls_cv_header_libgt= dnl For backward compatibility. Some Makefiles may be using this. DATADIRNAME=share AC_SUBST(DATADIRNAME) dnl For backward compatibility. Some Makefiles may be using this. INSTOBJEXT=.mo AC_SUBST(INSTOBJEXT) dnl For backward compatibility. Some Makefiles may be using this. GENCAT=gencat AC_SUBST(GENCAT) dnl For backward compatibility. Some Makefiles may be using this. if test "$USE_INCLUDED_LIBINTL" = yes; then INTLOBJS="\$(GETTOBJS)" fi AC_SUBST(INTLOBJS) dnl Enable libtool support if the surrounding package wishes it. INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX) ]) dnl For backward compatibility. Some Makefiles may be using this. INTLLIBS="$LIBINTL" AC_SUBST(INTLLIBS) dnl Make all documented variables known to autoconf. AC_SUBST(LIBINTL) AC_SUBST(LTLIBINTL) AC_SUBST(POSUB) ]) dnl Checks for all prerequisites of the intl subdirectory, dnl except for INTL_LIBTOOL_SUFFIX_PREFIX (and possibly LIBTOOL), INTLOBJS, dnl USE_INCLUDED_LIBINTL, BUILD_INCLUDED_LIBINTL. AC_DEFUN([AM_INTL_SUBDIR], [ AC_REQUIRE([AC_PROG_INSTALL])dnl AC_REQUIRE([AM_MKINSTALLDIRS])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_ISC_POSIX])dnl AC_REQUIRE([AC_HEADER_STDC])dnl AC_REQUIRE([AC_C_CONST])dnl AC_REQUIRE([AC_C_INLINE])dnl AC_REQUIRE([AC_TYPE_OFF_T])dnl AC_REQUIRE([AC_TYPE_SIZE_T])dnl AC_REQUIRE([AC_FUNC_ALLOCA])dnl AC_REQUIRE([AC_FUNC_MMAP])dnl AC_REQUIRE([jm_GLIBC21])dnl AC_REQUIRE([gt_INTDIV0])dnl AC_REQUIRE([jm_AC_TYPE_UINTMAX_T])dnl AC_REQUIRE([gt_HEADER_INTTYPES_H])dnl AC_REQUIRE([gt_INTTYPES_PRI])dnl AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h stddef.h \ stdlib.h string.h unistd.h sys/param.h]) AC_CHECK_FUNCS([feof_unlocked fgets_unlocked getc_unlocked getcwd getegid \ geteuid getgid getuid mempcpy munmap putenv setenv setlocale stpcpy \ strcasecmp strdup strtoul tsearch __argz_count __argz_stringify __argz_next \ __fsetlocking]) AM_ICONV AM_LANGINFO_CODESET if test $ac_cv_header_locale_h = yes; then AM_LC_MESSAGES fi dnl intl/plural.c is generated from intl/plural.y. It requires bison, dnl because plural.y uses bison specific features. It requires at least dnl bison-1.26 because earlier versions generate a plural.c that doesn't dnl compile. dnl bison is only needed for the maintainer (who touches plural.y). But in dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put dnl the rule in general Makefile. Now, some people carelessly touch the dnl files or have a broken "make" program, hence the plural.c rule will dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not dnl present or too old. AC_CHECK_PROGS([INTLBISON], [bison]) if test -z "$INTLBISON"; then ac_verc_fail=yes else dnl Found it, now check the version. AC_MSG_CHECKING([version of bison]) changequote(<<,>>)dnl ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'` case $ac_prog_version in '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;; 1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*) changequote([,])dnl ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;; *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;; esac AC_MSG_RESULT([$ac_prog_version]) fi if test $ac_verc_fail = yes; then INTLBISON=: fi ]) dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version]) AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) kasumi-2.5/m4/progtest.m40000644000175000017500000000563410142036016012224 00000000000000# progtest.m4 serial 3 (gettext-0.12) dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl dnl This file can can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: dnl Ulrich Drepper , 1996. # Search path for a program which passes the given test. dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) AC_DEFUN([AM_PATH_PROG_WITH_TEST], [ # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi # Find out how to test for executable files. Don't use a zero-byte file, # as systems may use methods other than mode bits to determine executability. cat >conf$$.file <<_ASEOF #! /bin/sh exit 0 _ASEOF chmod +x conf$$.file if test -x conf$$.file >/dev/null 2>&1; then ac_executable_p="test -x" else ac_executable_p="test -f" fi rm -f conf$$.file # Extract the first word of "$2", so it can be a program name with args. set dummy $2; ac_word=[$]2 AC_MSG_CHECKING([for $ac_word]) AC_CACHE_VAL(ac_cv_path_$1, [case "[$]$1" in [[\\/]]* | ?:[[\\/]]*) ac_cv_path_$1="[$]$1" # Let the user override the test with a path. ;; *) ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in ifelse([$5], , $PATH, [$5]); do IFS="$ac_save_IFS" test -z "$ac_dir" && ac_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then if [$3]; then ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext" break 2 fi fi done done IFS="$ac_save_IFS" dnl If no 4th arg is given, leave the cache variable unset, dnl so AC_PATH_PROGS will keep looking. ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" ])dnl ;; esac])dnl $1="$ac_cv_path_$1" if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then AC_MSG_RESULT([$]$1) else AC_MSG_RESULT(no) fi AC_SUBST($1)dnl ]) kasumi-2.5/m4/inttypes-pri.m40000644000175000017500000000222710142036016013017 00000000000000# inttypes-pri.m4 serial 1 (gettext-0.11.4) dnl Copyright (C) 1997-2002 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl From Bruno Haible. # Define PRI_MACROS_BROKEN if exists and defines the PRI* # macros to non-string values. This is the case on AIX 4.3.3. AC_DEFUN([gt_INTTYPES_PRI], [ AC_REQUIRE([gt_HEADER_INTTYPES_H]) if test $gt_cv_header_inttypes_h = yes; then AC_CACHE_CHECK([whether the inttypes.h PRIxNN macros are broken], gt_cv_inttypes_pri_broken, [ AC_TRY_COMPILE([#include #ifdef PRId32 char *p = PRId32; #endif ], [], gt_cv_inttypes_pri_broken=no, gt_cv_inttypes_pri_broken=yes) ]) fi if test "$gt_cv_inttypes_pri_broken" = yes; then AC_DEFINE_UNQUOTED(PRI_MACROS_BROKEN, 1, [Define if exists and defines unusable PRI* macros.]) fi ]) kasumi-2.5/m4/po.m40000644000175000017500000002152010142036016010763 00000000000000# po.m4 serial 1 (gettext-0.12) dnl Copyright (C) 1995-2003 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl dnl This file can can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: dnl Ulrich Drepper , 1995-2000. dnl Bruno Haible , 2000-2003. dnl Checks for all prerequisites of the po subdirectory. AC_DEFUN([AM_PO_SUBDIRS], [ AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl AC_REQUIRE([AM_MKINSTALLDIRS])dnl AC_REQUIRE([AM_NLS])dnl dnl Perform the following tests also if --disable-nls has been given, dnl because they are needed for "make dist" to work. dnl Search for GNU msgfmt in the PATH. dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions. dnl The second test excludes FreeBSD msgfmt. AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1 && (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], :) AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) dnl Search for GNU xgettext 0.12 or newer in the PATH. dnl The first test excludes Solaris xgettext and early GNU xgettext versions. dnl The second test excludes FreeBSD xgettext. AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 && (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], :) dnl Remove leftover from FreeBSD xgettext call. rm -f messages.po dnl Search for GNU msgmerge 0.11 or newer in the PATH. AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge, [$ac_dir/$ac_word --update -q /dev/null /dev/null >/dev/null 2>&1], :) dnl This could go away some day; the PATH_PROG_WITH_TEST already does it. dnl Test whether we really found GNU msgfmt. if test "$GMSGFMT" != ":"; then dnl If it is no GNU msgfmt we define it as : so that the dnl Makefiles still can work. if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 && (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then : ; else GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'` AC_MSG_RESULT( [found $GMSGFMT program is not GNU msgfmt; ignore it]) GMSGFMT=":" fi fi dnl This could go away some day; the PATH_PROG_WITH_TEST already does it. dnl Test whether we really found GNU xgettext. if test "$XGETTEXT" != ":"; then dnl If it is no GNU xgettext we define it as : so that the dnl Makefiles still can work. if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 && (if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then : ; else AC_MSG_RESULT( [found xgettext program is not GNU xgettext; ignore it]) XGETTEXT=":" fi dnl Remove leftover from FreeBSD xgettext call. rm -f messages.po fi AC_OUTPUT_COMMANDS([ for ac_file in $CONFIG_FILES; do # Support "outfile[:infile[:infile...]]" case "$ac_file" in *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; esac # PO directories have a Makefile.in generated from Makefile.in.in. case "$ac_file" in */Makefile.in) # Adjust a relative srcdir. ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` # In autoconf-2.13 it is called $ac_given_srcdir. # In autoconf-2.50 it is called $srcdir. test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" case "$ac_given_srcdir" in .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; /*) top_srcdir="$ac_given_srcdir" ;; *) top_srcdir="$ac_dots$ac_given_srcdir" ;; esac if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then rm -f "$ac_dir/POTFILES" test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" POMAKEFILEDEPS="POTFILES.in" # ALL_LINGUAS, POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES depend # on $ac_dir but don't depend on user-specified configuration # parameters. if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then # The LINGUAS file contains the set of available languages. if test -n "$OBSOLETE_ALL_LINGUAS"; then test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" fi ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"` # Hide the ALL_LINGUAS assigment from automake. eval 'ALL_LINGUAS''=$ALL_LINGUAS_' POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" else # The set of available languages was given in configure.in. eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' fi case "$ac_given_srcdir" in .) srcdirpre= ;; *) srcdirpre='$(srcdir)/' ;; esac POFILES= GMOFILES= UPDATEPOFILES= DUMMYPOFILES= for lang in $ALL_LINGUAS; do POFILES="$POFILES $srcdirpre$lang.po" GMOFILES="$GMOFILES $srcdirpre$lang.gmo" UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" DUMMYPOFILES="$DUMMYPOFILES $lang.nop" done # CATALOGS depends on both $ac_dir and the user's LINGUAS # environment variable. INST_LINGUAS= if test -n "$ALL_LINGUAS"; then for presentlang in $ALL_LINGUAS; do useit=no if test "%UNSET%" != "$LINGUAS"; then desiredlanguages="$LINGUAS" else desiredlanguages="$ALL_LINGUAS" fi for desiredlang in $desiredlanguages; do # Use the presentlang catalog if desiredlang is # a. equal to presentlang, or # b. a variant of presentlang (because in this case, # presentlang can be used as a fallback for messages # which are not translated in the desiredlang catalog). case "$desiredlang" in "$presentlang"*) useit=yes;; esac done if test $useit = yes; then INST_LINGUAS="$INST_LINGUAS $presentlang" fi done fi CATALOGS= if test -n "$INST_LINGUAS"; then for lang in $INST_LINGUAS; do CATALOGS="$CATALOGS $lang.gmo" done fi test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do if test -f "$f"; then case "$f" in *.orig | *.bak | *~) ;; *) cat "$f" >> "$ac_dir/Makefile" ;; esac fi done fi ;; esac done], [# Capture the value of obsolete ALL_LINGUAS because we need it to compute # POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES, CATALOGS. But hide it # from automake. eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' # Capture the value of LINGUAS because we need it to compute CATALOGS. LINGUAS="${LINGUAS-%UNSET%}" ]) ]) kasumi-2.5/m4/Makefile.am0000644000175000017500000000035110142036016012136 00000000000000EXTRA_DIST = codeset.m4 gettext.m4 glibc21.m4 iconv.m4 intdiv0.m4 inttypes.m4 inttypes_h.m4 inttypes-pri.m4 isc-posix.m4 lcmessage.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 nls.m4 po.m4 progtest.m4 stdint_h.m4 uintmax_t.m4 ulonglong.m4 kasumi-2.5/m4/lcmessage.m40000644000175000017500000000261610142036016012315 00000000000000# lcmessage.m4 serial 3 (gettext-0.11.3) dnl Copyright (C) 1995-2002 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl dnl This file can can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: dnl Ulrich Drepper , 1995. # Check whether LC_MESSAGES is available in . AC_DEFUN([AM_LC_MESSAGES], [ AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, [AC_TRY_LINK([#include ], [return LC_MESSAGES], am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) if test $am_cv_val_LC_MESSAGES = yes; then AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your file defines LC_MESSAGES.]) fi ]) kasumi-2.5/m4/isc-posix.m40000644000175000017500000000213310142036016012262 00000000000000# isc-posix.m4 serial 2 (gettext-0.11.2) dnl Copyright (C) 1995-2002 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. # This file is not needed with autoconf-2.53 and newer. Remove it in 2005. # This test replaces the one in autoconf. # Currently this macro should have the same name as the autoconf macro # because gettext's gettext.m4 (distributed in the automake package) # still uses it. Otherwise, the use in gettext.m4 makes autoheader # give these diagnostics: # configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX # configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX undefine([AC_ISC_POSIX]) AC_DEFUN([AC_ISC_POSIX], [ dnl This test replaces the obsolescent AC_ISC_POSIX kludge. AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"]) ] ) kasumi-2.5/m4/inttypes_h.m40000644000175000017500000000210310142036016012527 00000000000000# inttypes_h.m4 serial 5 (gettext-0.12) dnl Copyright (C) 1997-2003 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl From Paul Eggert. # Define HAVE_INTTYPES_H_WITH_UINTMAX if exists, # doesn't clash with , and declares uintmax_t. AC_DEFUN([jm_AC_HEADER_INTTYPES_H], [ AC_CACHE_CHECK([for inttypes.h], jm_ac_cv_header_inttypes_h, [AC_TRY_COMPILE( [#include #include ], [uintmax_t i = (uintmax_t) -1;], jm_ac_cv_header_inttypes_h=yes, jm_ac_cv_header_inttypes_h=no)]) if test $jm_ac_cv_header_inttypes_h = yes; then AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H_WITH_UINTMAX, 1, [Define if exists, doesn't clash with , and declares uintmax_t. ]) fi ]) kasumi-2.5/m4/lib-link.m40000644000175000017500000005534310142036016012060 00000000000000# lib-link.m4 serial 4 (gettext-0.12) dnl Copyright (C) 2001-2003 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl From Bruno Haible. dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and dnl the libraries corresponding to explicit and implicit dependencies. dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and dnl augments the CPPFLAGS variable. AC_DEFUN([AC_LIB_LINKFLAGS], [ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) define([Name],[translit([$1],[./-], [___])]) define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ AC_LIB_LINKFLAGS_BODY([$1], [$2]) ac_cv_lib[]Name[]_libs="$LIB[]NAME" ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" ac_cv_lib[]Name[]_cppflags="$INC[]NAME" ]) LIB[]NAME="$ac_cv_lib[]Name[]_libs" LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" INC[]NAME="$ac_cv_lib[]Name[]_cppflags" AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) AC_SUBST([LIB]NAME) AC_SUBST([LTLIB]NAME) dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the dnl results of this search when this library appears as a dependency. HAVE_LIB[]NAME=yes undefine([Name]) undefine([NAME]) ]) dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode) dnl searches for libname and the libraries corresponding to explicit and dnl implicit dependencies, together with the specified include files and dnl the ability to compile and link the specified testcode. If found, it dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], [ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) define([Name],[translit([$1],[./-], [___])]) define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME dnl accordingly. AC_LIB_LINKFLAGS_BODY([$1], [$2]) dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, dnl because if the user has installed lib[]Name and not disabled its use dnl via --without-lib[]Name-prefix, he wants to use it. ac_save_CPPFLAGS="$CPPFLAGS" AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ ac_save_LIBS="$LIBS" LIBS="$LIBS $LIB[]NAME" AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no]) LIBS="$ac_save_LIBS" ]) if test "$ac_cv_lib[]Name" = yes; then HAVE_LIB[]NAME=yes AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.]) AC_MSG_CHECKING([how to link with lib[]$1]) AC_MSG_RESULT([$LIB[]NAME]) else HAVE_LIB[]NAME=no dnl If $LIB[]NAME didn't lead to a usable library, we don't need dnl $INC[]NAME either. CPPFLAGS="$ac_save_CPPFLAGS" LIB[]NAME= LTLIB[]NAME= fi AC_SUBST([HAVE_LIB]NAME) AC_SUBST([LIB]NAME) AC_SUBST([LTLIB]NAME) undefine([Name]) undefine([NAME]) ]) dnl Determine the platform dependent parameters needed to use rpath: dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator, dnl hardcode_direct, hardcode_minus_L. AC_DEFUN([AC_LIB_RPATH], [ AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh . ./conftest.sh rm -f ./conftest.sh acl_cv_rpath=done ]) wl="$acl_cv_wl" libext="$acl_cv_libext" shlibext="$acl_cv_shlibext" hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" hardcode_direct="$acl_cv_hardcode_direct" hardcode_minus_L="$acl_cv_hardcode_minus_L" dnl Determine whether the user wants rpath handling at all. AC_ARG_ENABLE(rpath, [ --disable-rpath do not hardcode runtime library paths], :, enable_rpath=yes) ]) dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and dnl the libraries corresponding to explicit and implicit dependencies. dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. AC_DEFUN([AC_LIB_LINKFLAGS_BODY], [ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) dnl By default, look in $includedir and $libdir. use_additional=yes AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) AC_LIB_ARG_WITH([lib$1-prefix], [ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib --without-lib$1-prefix don't search for lib$1 in includedir and libdir], [ if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) else additional_includedir="$withval/include" additional_libdir="$withval/lib" fi fi ]) dnl Search the library and its dependencies in $additional_libdir and dnl $LDFLAGS. Using breadth-first-seach. LIB[]NAME= LTLIB[]NAME= INC[]NAME= rpathdirs= ltrpathdirs= names_already_handled= names_next_round='$1 $2' while test -n "$names_next_round"; do names_this_round="$names_next_round" names_next_round= for name in $names_this_round; do already_handled= for n in $names_already_handled; do if test "$n" = "$name"; then already_handled=yes break fi done if test -z "$already_handled"; then names_already_handled="$names_already_handled $name" dnl See if it was already located by an earlier AC_LIB_LINKFLAGS dnl or AC_LIB_HAVE_LINKFLAGS call. uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` eval value=\"\$HAVE_LIB$uppername\" if test -n "$value"; then if test "$value" = yes; then eval value=\"\$LIB$uppername\" test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" eval value=\"\$LTLIB$uppername\" test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" else dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined dnl that this library doesn't exist. So just drop it. : fi else dnl Search the library lib$name in $additional_libdir and $LDFLAGS dnl and the already constructed $LIBNAME/$LTLIBNAME. found_dir= found_la= found_so= found_a= if test $use_additional = yes; then if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then found_dir="$additional_libdir" found_so="$additional_libdir/lib$name.$shlibext" if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi else if test -f "$additional_libdir/lib$name.$libext"; then found_dir="$additional_libdir" found_a="$additional_libdir/lib$name.$libext" if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi fi fi fi if test "X$found_dir" = "X"; then for x in $LDFLAGS $LTLIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) case "$x" in -L*) dir=`echo "X$x" | sed -e 's/^X-L//'` if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then found_dir="$dir" found_so="$dir/lib$name.$shlibext" if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi else if test -f "$dir/lib$name.$libext"; then found_dir="$dir" found_a="$dir/lib$name.$libext" if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi fi fi ;; esac if test "X$found_dir" != "X"; then break fi done fi if test "X$found_dir" != "X"; then dnl Found the library. LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" if test "X$found_so" != "X"; then dnl Linking with a shared library. We attempt to hardcode its dnl directory into the executable's runpath, unless it's the dnl standard /usr/lib. if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then dnl No hardcoding is needed. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else dnl Use an explicit option to hardcode DIR into the resulting dnl binary. dnl Potentially add DIR to ltrpathdirs. dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. haveit= for x in $ltrpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $found_dir" fi dnl The hardcoding into $LIBNAME is system dependent. if test "$hardcode_direct" = yes; then dnl Using DIR/libNAME.so during linking hardcodes DIR into the dnl resulting binary. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then dnl Use an explicit option to hardcode DIR into the resulting dnl binary. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" dnl Potentially add DIR to rpathdirs. dnl The rpathdirs will be appended to $LIBNAME at the end. haveit= for x in $rpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $found_dir" fi else dnl Rely on "-L$found_dir". dnl But don't add it if it's already contained in the LDFLAGS dnl or the already constructed $LIBNAME haveit= for x in $LDFLAGS $LIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" fi if test "$hardcode_minus_L" != no; then dnl FIXME: Not sure whether we should use dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" dnl here. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH dnl here, because this doesn't fit in flags passed to the dnl compiler. So give up. No hardcoding. This affects only dnl very old systems. dnl FIXME: Not sure whether we should use dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" dnl here. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" fi fi fi fi else if test "X$found_a" != "X"; then dnl Linking with a static library. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" else dnl We shouldn't come here, but anyway it's good to have a dnl fallback. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" fi fi dnl Assume the include files are nearby. additional_includedir= case "$found_dir" in */lib | */lib/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` additional_includedir="$basedir/include" ;; esac if test "X$additional_includedir" != "X"; then dnl Potentially add $additional_includedir to $INCNAME. dnl But don't add it dnl 1. if it's the standard /usr/include, dnl 2. if it's /usr/local/include and we are using GCC on Linux, dnl 3. if it's already present in $CPPFLAGS or the already dnl constructed $INCNAME, dnl 4. if it doesn't exist as a directory. if test "X$additional_includedir" != "X/usr/include"; then haveit= if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; esac fi fi if test -z "$haveit"; then for x in $CPPFLAGS $INC[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_includedir"; then dnl Really add $additional_includedir to $INCNAME. INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" fi fi fi fi fi dnl Look for dependencies. if test -n "$found_la"; then dnl Read the .la file. It defines the variables dnl dlname, library_names, old_library, dependency_libs, current, dnl age, revision, installed, dlopen, dlpreopen, libdir. save_libdir="$libdir" case "$found_la" in */* | *\\*) . "$found_la" ;; *) . "./$found_la" ;; esac libdir="$save_libdir" dnl We use only dependency_libs. for dep in $dependency_libs; do case "$dep" in -L*) additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. dnl But don't add it dnl 1. if it's the standard /usr/lib, dnl 2. if it's /usr/local/lib and we are using GCC on Linux, dnl 3. if it's already present in $LDFLAGS or the already dnl constructed $LIBNAME, dnl 4. if it doesn't exist as a directory. if test "X$additional_libdir" != "X/usr/lib"; then haveit= if test "X$additional_libdir" = "X/usr/local/lib"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; esac fi fi if test -z "$haveit"; then haveit= for x in $LDFLAGS $LIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LIBNAME. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" fi fi haveit= for x in $LDFLAGS $LTLIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LTLIBNAME. LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" fi fi fi fi ;; -R*) dir=`echo "X$dep" | sed -e 's/^X-R//'` if test "$enable_rpath" != no; then dnl Potentially add DIR to rpathdirs. dnl The rpathdirs will be appended to $LIBNAME at the end. haveit= for x in $rpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $dir" fi dnl Potentially add DIR to ltrpathdirs. dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. haveit= for x in $ltrpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $dir" fi fi ;; -l*) dnl Handle this in the next round. names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ;; *.la) dnl Handle this in the next round. Throw away the .la's dnl directory; it is already contained in a preceding -L dnl option. names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ;; *) dnl Most likely an immediate library name. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" ;; esac done fi else dnl Didn't find the library; assume it is in the system directories dnl known to the linker and runtime loader. (All the system dnl directories known to the linker should also be known to the dnl runtime loader, otherwise the system is severely misconfigured.) LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" fi fi fi done done if test "X$rpathdirs" != "X"; then if test -n "$hardcode_libdir_separator"; then dnl Weird platform: only the last -rpath option counts, the user must dnl pass all path elements in one option. We can arrange that for a dnl single library, but not when more than one $LIBNAMEs are used. alldirs= for found_dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" done dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl. acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" else dnl The -rpath options are cumulative. for found_dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$found_dir" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" done fi fi if test "X$ltrpathdirs" != "X"; then dnl When using libtool, the option that works for both libraries and dnl executables is -R. The -R options are cumulative. for found_dir in $ltrpathdirs; do LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" done fi ]) dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, dnl unless already present in VAR. dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes dnl contains two or three consecutive elements that belong together. AC_DEFUN([AC_LIB_APPENDTOVAR], [ for element in [$2]; do haveit= for x in $[$1]; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X$element"; then haveit=yes break fi done if test -z "$haveit"; then [$1]="${[$1]}${[$1]:+ }$element" fi done ]) kasumi-2.5/m4/ChangeLog0000644000175000017500000000170310142036016011656 000000000000002004-10-18 gettextize * codeset.m4: New file, from gettext-0.12.1. * gettext.m4: New file, from gettext-0.12.1. * glibc21.m4: New file, from gettext-0.12.1. * iconv.m4: New file, from gettext-0.12.1. * intdiv0.m4: New file, from gettext-0.12.1. * inttypes.m4: New file, from gettext-0.12.1. * inttypes_h.m4: New file, from gettext-0.12.1. * inttypes-pri.m4: New file, from gettext-0.12.1. * isc-posix.m4: New file, from gettext-0.12.1. * lcmessage.m4: New file, from gettext-0.12.1. * lib-ld.m4: New file, from gettext-0.12.1. * lib-link.m4: New file, from gettext-0.12.1. * lib-prefix.m4: New file, from gettext-0.12.1. * nls.m4: New file, from gettext-0.12.1. * po.m4: New file, from gettext-0.12.1. * progtest.m4: New file, from gettext-0.12.1. * stdint_h.m4: New file, from gettext-0.12.1. * uintmax_t.m4: New file, from gettext-0.12.1. * ulonglong.m4: New file, from gettext-0.12.1. * Makefile.am: New file. kasumi-2.5/m4/inttypes.m40000644000175000017500000000171710142036016012232 00000000000000# inttypes.m4 serial 1 (gettext-0.11.4) dnl Copyright (C) 1997-2002 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl From Paul Eggert. # Define HAVE_INTTYPES_H if exists and doesn't clash with # . AC_DEFUN([gt_HEADER_INTTYPES_H], [ AC_CACHE_CHECK([for inttypes.h], gt_cv_header_inttypes_h, [ AC_TRY_COMPILE( [#include #include ], [], gt_cv_header_inttypes_h=yes, gt_cv_header_inttypes_h=no) ]) if test $gt_cv_header_inttypes_h = yes; then AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H, 1, [Define if exists and doesn't clash with .]) fi ]) kasumi-2.5/m4/Makefile.in0000644000175000017500000002317411227745457012204 00000000000000# Makefile.in generated by automake 1.10.2 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = m4 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ChangeLog ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/codeset.m4 \ $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intdiv0.m4 \ $(top_srcdir)/m4/inttypes-pri.m4 $(top_srcdir)/m4/inttypes.m4 \ $(top_srcdir)/m4/inttypes_h.m4 $(top_srcdir)/m4/isc-posix.m4 \ $(top_srcdir)/m4/lcmessage.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/stdint_h.m4 \ $(top_srcdir)/m4/uintmax_t.m4 $(top_srcdir)/m4/ulonglong.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALLOCA = @ALLOCA@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GENCAT = @GENCAT@ GLIBC21 = @GLIBC21@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLBISON = @INTLBISON@ INTLLIBS = @INTLLIBS@ INTLOBJS = @INTLOBJS@ INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POSUB = @POSUB@ RANLIB = @RANLIB@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ EXTRA_DIST = codeset.m4 gettext.m4 glibc21.m4 iconv.m4 intdiv0.m4 inttypes.m4 inttypes_h.m4 inttypes-pri.m4 isc-posix.m4 lcmessage.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 nls.m4 po.m4 progtest.m4 stdint_h.m4 uintmax_t.m4 ulonglong.m4 all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu m4/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu m4/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-exec-am: install-html: install-html-am install-info: install-info-am install-man: install-pdf: install-pdf-am install-ps: install-ps-am installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic distclean \ distclean-generic distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: kasumi-2.5/m4/lib-ld.m40000644000175000017500000000676110142036016011522 00000000000000# lib-ld.m4 serial 2 (gettext-0.12) dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl Subroutines of libtool.m4, dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision dnl with libtool.m4. dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. AC_DEFUN([AC_LIB_PROG_LD_GNU], [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then acl_cv_prog_gnu_ld=yes else acl_cv_prog_gnu_ld=no fi]) with_gnu_ld=$acl_cv_prog_gnu_ld ]) dnl From libtool-1.4. Sets the variable LD. AC_DEFUN([AC_LIB_PROG_LD], [AC_ARG_WITH(gnu-ld, [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]* | [A-Za-z]:[\\/]*)] [re_direlt='/[^/][^/]*/\.\./'] # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(acl_cv_path_LD, [if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then acl_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else acl_cv_path_LD="$LD" # Let the user override the test with a path. fi]) LD="$acl_cv_path_LD" if test -n "$LD"; then AC_MSG_RESULT($LD) else AC_MSG_RESULT(no) fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_LIB_PROG_LD_GNU ]) kasumi-2.5/m4/uintmax_t.m40000644000175000017500000000235010142036016012355 00000000000000# uintmax_t.m4 serial 7 (gettext-0.12) dnl Copyright (C) 1997-2003 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl From Paul Eggert. AC_PREREQ(2.13) # Define uintmax_t to 'unsigned long' or 'unsigned long long' # if it is not already defined in or . AC_DEFUN([jm_AC_TYPE_UINTMAX_T], [ AC_REQUIRE([jm_AC_HEADER_INTTYPES_H]) AC_REQUIRE([jm_AC_HEADER_STDINT_H]) if test $jm_ac_cv_header_inttypes_h = no && test $jm_ac_cv_header_stdint_h = no; then AC_REQUIRE([jm_AC_TYPE_UNSIGNED_LONG_LONG]) test $ac_cv_type_unsigned_long_long = yes \ && ac_type='unsigned long long' \ || ac_type='unsigned long' AC_DEFINE_UNQUOTED(uintmax_t, $ac_type, [Define to unsigned long or unsigned long long if and don't define.]) else AC_DEFINE(HAVE_UINTMAX_T, 1, [Define if you have the 'uintmax_t' type in or .]) fi ]) kasumi-2.5/m4/lib-prefix.m40000644000175000017500000001250510142036016012411 00000000000000# lib-prefix.m4 serial 2 (gettext-0.12) dnl Copyright (C) 2001-2003 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl From Bruno Haible. dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't dnl require excessive bracketing. ifdef([AC_HELP_STRING], [AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], [AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed dnl to access previously installed libraries. The basic assumption is that dnl a user will want packages to use other packages he previously installed dnl with the same --prefix option. dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate dnl libraries, but is otherwise very convenient. AC_DEFUN([AC_LIB_PREFIX], [ AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) AC_REQUIRE([AC_PROG_CC]) AC_REQUIRE([AC_CANONICAL_HOST]) AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) dnl By default, look in $includedir and $libdir. use_additional=yes AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) AC_LIB_ARG_WITH([lib-prefix], [ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib --without-lib-prefix don't search for libraries in includedir and libdir], [ if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) else additional_includedir="$withval/include" additional_libdir="$withval/lib" fi fi ]) if test $use_additional = yes; then dnl Potentially add $additional_includedir to $CPPFLAGS. dnl But don't add it dnl 1. if it's the standard /usr/include, dnl 2. if it's already present in $CPPFLAGS, dnl 3. if it's /usr/local/include and we are using GCC on Linux, dnl 4. if it doesn't exist as a directory. if test "X$additional_includedir" != "X/usr/include"; then haveit= for x in $CPPFLAGS; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; esac fi fi if test -z "$haveit"; then if test -d "$additional_includedir"; then dnl Really add $additional_includedir to $CPPFLAGS. CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" fi fi fi fi dnl Potentially add $additional_libdir to $LDFLAGS. dnl But don't add it dnl 1. if it's the standard /usr/lib, dnl 2. if it's already present in $LDFLAGS, dnl 3. if it's /usr/local/lib and we are using GCC on Linux, dnl 4. if it doesn't exist as a directory. if test "X$additional_libdir" != "X/usr/lib"; then haveit= for x in $LDFLAGS; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test "X$additional_libdir" = "X/usr/local/lib"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; esac fi fi if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LDFLAGS. LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" fi fi fi fi fi ]) dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, dnl acl_final_exec_prefix, containing the values to which $prefix and dnl $exec_prefix will expand at the end of the configure script. AC_DEFUN([AC_LIB_PREPARE_PREFIX], [ dnl Unfortunately, prefix and exec_prefix get only finally determined dnl at the end of configure. if test "X$prefix" = "XNONE"; then acl_final_prefix="$ac_default_prefix" else acl_final_prefix="$prefix" fi if test "X$exec_prefix" = "XNONE"; then acl_final_exec_prefix='${prefix}' else acl_final_exec_prefix="$exec_prefix" fi acl_save_prefix="$prefix" prefix="$acl_final_prefix" eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" prefix="$acl_save_prefix" ]) dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the dnl variables prefix and exec_prefix bound to the values they will have dnl at the end of the configure script. AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], [ acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" $1 exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" ]) kasumi-2.5/m4/ulonglong.m40000644000175000017500000000200010142036016012341 00000000000000# ulonglong.m4 serial 2 (fileutils-4.0.32, gettext-0.10.40) dnl Copyright (C) 1999-2002 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl From Paul Eggert. AC_DEFUN([jm_AC_TYPE_UNSIGNED_LONG_LONG], [ AC_CACHE_CHECK([for unsigned long long], ac_cv_type_unsigned_long_long, [AC_TRY_LINK([unsigned long long ull = 1; int i = 63;], [unsigned long long ullmax = (unsigned long long) -1; return ull << i | ull >> i | ullmax / ull | ullmax % ull;], ac_cv_type_unsigned_long_long=yes, ac_cv_type_unsigned_long_long=no)]) if test $ac_cv_type_unsigned_long_long = yes; then AC_DEFINE(HAVE_UNSIGNED_LONG_LONG, 1, [Define if you have the unsigned long long type.]) fi ]) kasumi-2.5/Makefile.in0000644000175000017500000007314011227745457011662 00000000000000# Makefile.in generated by automake 1.10.2 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = kasumi$(EXEEXT) subdir = . DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ $(srcdir)/kasumi.desktop.in $(top_srcdir)/configure \ $(top_srcdir)/intl/Makefile.in ABOUT-NLS AUTHORS COPYING \ ChangeLog INSTALL NEWS config.guess config.rpath config.sub \ depcomp install-sh missing mkinstalldirs ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/codeset.m4 \ $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intdiv0.m4 \ $(top_srcdir)/m4/inttypes-pri.m4 $(top_srcdir)/m4/inttypes.m4 \ $(top_srcdir)/m4/inttypes_h.m4 $(top_srcdir)/m4/isc-posix.m4 \ $(top_srcdir)/m4/lcmessage.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/stdint_h.m4 \ $(top_srcdir)/m4/uintmax_t.m4 $(top_srcdir)/m4/ulonglong.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = kasumi.desktop intl/Makefile am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" \ "$(DESTDIR)$(appicondir)" "$(DESTDIR)$(desktopdir)" binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(bin_PROGRAMS) am_kasumi_OBJECTS = main.$(OBJEXT) KasumiDic.$(OBJEXT) \ KasumiWord.$(OBJEXT) KasumiWordType.$(OBJEXT) \ KasumiString.$(OBJEXT) KasumiException.$(OBJEXT) \ KasumiMainWindow.$(OBJEXT) KasumiAddWindow.$(OBJEXT) \ KasumiConfiguration.$(OBJEXT) cellrendererspin.$(OBJEXT) kasumi_OBJECTS = $(am_kasumi_OBJECTS) am__DEPENDENCIES_1 = kasumi_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) DEFAULT_INCLUDES = -I.@am__isrc@ depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \ -o $@ SOURCES = $(kasumi_SOURCES) DIST_SOURCES = $(kasumi_SOURCES) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive man1dir = $(mandir)/man1 NROFF = nroff MANS = $(man_MANS) am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; appiconDATA_INSTALL = $(INSTALL_DATA) desktopDATA_INSTALL = $(INSTALL_DATA) DATA = $(appicon_DATA) $(desktop_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ ALLOCA = @ALLOCA@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GENCAT = @GENCAT@ GLIBC21 = @GLIBC21@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLBISON = @INTLBISON@ INTLLIBS = @INTLLIBS@ INTLOBJS = @INTLOBJS@ INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POSUB = @POSUB@ RANLIB = @RANLIB@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = $(datadir)/locale localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ kasumi_SOURCES = main.cxx intl.h \ KasumiDic.cxx KasumiDic.hxx \ KasumiWord.cxx KasumiWord.hxx \ KasumiWordType.cxx KasumiWordType.hxx \ KasumiString.cxx KasumiString.hxx \ KasumiException.cxx KasumiException.hxx \ KasumiMainWindow.cxx KasumiMainWindow.hxx \ KasumiAddWindow.cxx KasumiAddWindow.hxx \ KasumiDicEventListener.hxx \ KasumiWordEventListener.hxx \ KasumiConfiguration.cxx KasumiConfiguration.hxx \ cellrendererspin.c cellrendererspin.h \ kasumi.png \ kasumi.1 \ kasumi.desktop.in appicondir = $(datadir)/pixmaps appicon_DATA = kasumi.png kasumi_LDADD = $(INTLLIBS) $(LTLIBICONV) man_MANS = kasumi.1 EXTRA_DIST = $(man_MANS) desktopdir = $(datadir)/applications Desktop_in_files = kasumi.desktop.in desktop_DATA = $(Desktop_in_files:.desktop.in=.desktop) AM_CPPFLAGS = -DLOCALEDIR=\"$(localedir)\" SUBDIRS = intl m4 po ACLOCAL_AMFLAGS = -I m4 CLEANFILES = $(desktop_DATA) all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .c .cxx .o .obj am--refresh: @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ cd $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) cd $(top_srcdir) && $(AUTOHEADER) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 kasumi.desktop: $(top_builddir)/config.status $(srcdir)/kasumi.desktop.in cd $(top_builddir) && $(SHELL) ./config.status $@ intl/Makefile: $(top_builddir)/config.status $(top_srcdir)/intl/Makefile.in cd $(top_builddir) && $(SHELL) ./config.status $@ install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" @list='$(bin_PROGRAMS)'; for p in $$list; do \ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ if test -f $$p \ ; then \ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ else :; fi; \ done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; for p in $$list; do \ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ rm -f "$(DESTDIR)$(bindir)/$$f"; \ done clean-binPROGRAMS: -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) kasumi$(EXEEXT): $(kasumi_OBJECTS) $(kasumi_DEPENDENCIES) @rm -f kasumi$(EXEEXT) $(CXXLINK) $(kasumi_OBJECTS) $(kasumi_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/KasumiAddWindow.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/KasumiConfiguration.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/KasumiDic.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/KasumiException.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/KasumiMainWindow.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/KasumiString.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/KasumiWord.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/KasumiWordType.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cellrendererspin.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .cxx.o: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cxx.obj: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` install-man1: $(man1_MANS) $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ if test -f $$i; then file=$$i; \ else file=$(srcdir)/$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ done uninstall-man1: @$(NORMAL_UNINSTALL) @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ done install-appiconDATA: $(appicon_DATA) @$(NORMAL_INSTALL) test -z "$(appicondir)" || $(MKDIR_P) "$(DESTDIR)$(appicondir)" @list='$(appicon_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(appiconDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(appicondir)/$$f'"; \ $(appiconDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(appicondir)/$$f"; \ done uninstall-appiconDATA: @$(NORMAL_UNINSTALL) @list='$(appicon_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(appicondir)/$$f'"; \ rm -f "$(DESTDIR)$(appicondir)/$$f"; \ done install-desktopDATA: $(desktop_DATA) @$(NORMAL_INSTALL) test -z "$(desktopdir)" || $(MKDIR_P) "$(DESTDIR)$(desktopdir)" @list='$(desktop_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(desktopDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(desktopdir)/$$f'"; \ $(desktopDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(desktopdir)/$$f"; \ done uninstall-desktopDATA: @$(NORMAL_UNINSTALL) @list='$(desktop_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(desktopdir)/$$f'"; \ rm -f "$(DESTDIR)$(desktopdir)/$$f"; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) test -d $(distdir) || mkdir $(distdir) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ am__remove_distdir=: \ am__skip_length_check=: \ distdir) \ || exit 1; \ fi; \ done -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-lzma: distdir tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lzma*) \ unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ --with-included-gettext \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(PROGRAMS) $(MANS) $(DATA) config.h installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(appicondir)" "$(DESTDIR)$(desktopdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-binPROGRAMS clean-generic mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-hdr distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-appiconDATA install-desktopDATA install-man install-dvi: install-dvi-recursive install-exec-am: install-binPROGRAMS install-html: install-html-recursive install-info: install-info-recursive install-man: install-man1 install-pdf: install-pdf-recursive install-ps: install-ps-recursive installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-appiconDATA uninstall-binPROGRAMS \ uninstall-desktopDATA uninstall-man uninstall-man: uninstall-man1 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ install-strip .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am am--refresh check check-am clean clean-binPROGRAMS \ clean-generic ctags ctags-recursive dist dist-all dist-bzip2 \ dist-gzip dist-lzma dist-shar dist-tarZ dist-zip distcheck \ distclean distclean-compile distclean-generic distclean-hdr \ distclean-tags distcleancheck distdir distuninstallcheck dvi \ dvi-am html html-am info info-am install install-am \ install-appiconDATA install-binPROGRAMS install-data \ install-data-am install-desktopDATA install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-man1 \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \ ps ps-am tags tags-recursive uninstall uninstall-am \ uninstall-appiconDATA uninstall-binPROGRAMS \ uninstall-desktopDATA uninstall-man uninstall-man1 #EXTRA_DIST = config.rpath # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: kasumi-2.5/KasumiConfiguration.cxx0000644000175000017500000003551111135274256014312 00000000000000/********************************************************************* * * KasumiConfiguration.cxx * * Kasumi - a management tool for a private dictionary of anthy * * Copyright (C) 2004-2006 Takashi Nakamoto * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. * *********************************************************************/ #include #include #include #include #include #include /* for getopt_long() */ #include #include "KasumiConfiguration.hxx" #include "KasumiException.hxx" #include "KasumiString.hxx" #include "KasumiWordType.hxx" #include "intl.h" #ifdef HAVE_CONFIG_H #include "config.h" #endif using namespace std; // if you want to add a new configuration settings, do the following: // 1. Set default value: Add a line to loadDefaultProperties() method // like; // config[string("NewKey")] = string("DefaultValue"); // 2. Add check routine for validating the setting in checkValidity method. // If it accepts only an integer value, it is the best to add the new key's // name to intValueKeyNames list like; // intValueKeyNames.push_back("NewKey"); // Or if it is a shortcut key setting, add the new key's name to keyName // list like: // keyName.push_back("NewKey"); // 3. If the setting may be set by command line arguments, add some routines // to loadConfigurationFromArgument method KasumiConfiguration::KasumiConfiguration(int argc, char *argv[]) throw(KasumiException){ try{ loadDefaultProperties(); // ~/.kasumi must be encoded in EUC-JP char *home = getenv("HOME"); if(home == NULL){ throw KasumiException(string("Cannot find $HOME environment variable."), STDERR, KILL); } ConfFileName = string(home) + "/.kasumi"; loadConfigurationFile(); }catch(KasumiException e){ throw e; } loadConfigurationFromArgument(argc, argv); checkValidity(); } KasumiConfiguration::~KasumiConfiguration(){ saveConfiguration(); } void KasumiConfiguration::loadDefaultProperties() throw(KasumiException){ char *home = getenv("HOME"); if(home == NULL){ throw KasumiException(string("Cannot find $HOME environment variable."), STDERR, KILL); } config[string("StartupMode")] = string("MANAGE"); config[string("DefaultFrequency")] = string("500"); config[string("MaxFrequency")] = string("1000"); config[string("MinFrequency")] = string("1"); // config[string("QuitShortcutKey")] = string("Ctrl+Q"); // config[string("StoreShortcutKey")] = string("Ctrl+S"); // config[string("NewWordShortcutKey")] = string("Ctrl+N"); // config[string("RemoveShortcutKey")] = string("Ctrl+R"); // config[string("AddShortcutKey")] = string("Ctrl+A"); // config[string("AddingModeShortcutKey")] = string("Ctrl+J"); // config[string("ManageModeShortcutKey")] = string("Ctrl+M"); config[string("DefaultSpelling")] = string(""); config[string("DefaultSound")] = string(""); config[string("DefaultWordType")] = string("#T35"); config[string("DefaultAddingSpelling")] = string(""); config[string("DefaultAddingSound")] = string(""); config[string("DefaultAddingWordType")] = string("#T35"); // config[string("DefaultWindowPosX")] = string("-1"); // config[string("DefaultWindowPosY")] = string("-1"); config[string("ImportSelectedText")] = string("true"); #ifdef HAS_ANTHY_DICUTIL_SET_ENCODING config[string("UseEUCJP")] = string("false"); #else // HAS_ANTHY_DICUTIL_SET_ENCODING config[string("UseEUCJP")] = string("true"); #endif // HAS_ANTHY_DICUTIL_SET_ENCODING } void KasumiConfiguration::loadConfigurationFromArgument(int argc, char *argv[]) throw(KasumiException){ int option_index = 0; static struct option long_options[] = { {"help", no_argument, NULL, 'h'}, {"version", no_argument, NULL, 'v'}, {"add", no_argument, NULL, 'a'}, {"exclusive", no_argument, NULL, 'e'}, {"manage", no_argument, NULL, 'm'}, {"sound", required_argument, NULL, 's'}, {"spelling", required_argument, NULL, 't'}, {"wordclass", required_argument, NULL, 'w'}, // {"x", required_argument, NULL, 'x'}, // {"y", required_argument, NULL, 'y'}, {"import", no_argument, NULL, 'i'}, {"ignore", no_argument, NULL, 'I'}, #ifdef HAS_ANTHY_DICUTIL_SET_ENCODING {"eucjp", no_argument, NULL, 'E'}, #endif // HAS_ANTHY_DICUTIL_SET_ENCODING {0,0,0,0} }; string message; int c; while(1){ // c = getopt_long(argc, argv, "hvamiIns:t:w:x:y:", long_options, &option_index); #ifdef HAS_ANTHY_DICUTIL_SET_ENCODING c = getopt_long(argc, argv, "hvaemiInEs:t:w:", long_options, &option_index); #else // HAS_ANTHY_DICUTIL_SET_ENCODING c = getopt_long(argc, argv, "hvaemiIns:t:w:", long_options, &option_index); #endif // HAS_ANTHY_DICUTIL_SET_ENCODING if(c == -1) break; // no more argument switch(c){ case 'h': setPropertyValue(string("StartupMode"),string("HELP")); break; case 'v': setPropertyValue(string("StartupMode"),string("VERSION")); break; case 'a': setPropertyValue(string("StartupMode"),string("ADD")); break; case 'm': setPropertyValue(string("StartupMode"),string("MANAGE")); break; case 'e': setPropertyValue(string("StartupMode"),string("EXCLUSIVE")); break; case 's': setPropertyValue(string("DefaultAddingSound"),string(optarg)); break; case 't': setPropertyValue(string("DefaultAddingSpelling"),string(optarg)); break; case 'w': setPropertyValue(string("DefaultAddingWordType"),string(optarg)); break; // case 'x': // setPropertyValue(string("DefaultWindowPosX"),string(optarg)); // break; // case 'y': // setPropertyValue(string("DefaultWindowPosY"),string(optarg)); // break; case 'i': setPropertyValue(string("ImportSelectedText"),string("true")); break; case 'I': setPropertyValue(string("ImportSelectedText"),string("false")); break; case 'E': setPropertyValue(string("UseEUCJP"),string("true")); break; case '?': case ':': message = string("Invalid argument error. Try '") + argv[0] + string(" --help' for more information."); throw KasumiException(message, STDERR, KILL); break; } } if(optind < argc){ message = string("Found non-option argument '") + argv[optind] + string("'. Try '") + argv[0] + string(" --help' for more information."); throw KasumiException(message, STDERR, KILL); } } void KasumiConfiguration::loadConfigurationFile() throw(KasumiException){ int line = 0; string Contents = string(); KasumiString Buffer; ifstream ConfFile(ConfFileName.c_str()); if(!ConfFile.is_open()){ return; // do not load configuration file } // analyze Kasumi Configuration file reading each line while(getline(ConfFile, Buffer, '\n')){ line++; if(Buffer.isCommentLine()){ // commented line; nothing to do }else if(Buffer.isEmptyLine()){ // empty line; nothing to do }else if(Buffer.isKeyValLine()){ config[Buffer.getKey()] = Buffer.getVal(); }else{ // not classfied line; configuration file is invalid! string message = ConfFileName + string(":") + int2str(line) + string(": invalid entry in configuration file."); throw KasumiException(message, STDERR, KILL); } } } // ToDo: implement saveConfiguration method void KasumiConfiguration::saveConfiguration() throw(KasumiException){ } void KasumiConfiguration::checkValidity() throw(KasumiException){ if(config[string("StartupMode")] != string("MANAGE") && config[string("StartupMode")] != string("ADD") && config[string("StartupMode")] != string("EXCLUSIVE") && config[string("StartupMode")] != string("HELP") && config[string("StartupMode")] != string("VERSION")){ string message("StartupMode variable must be \"MANAGE\", \"EXCLUSIVE\" or \"ADD\""); throw KasumiException(message, STDERR, KILL); } // check conrresponding settings being an integer list intValueKeyNames; intValueKeyNames.push_back(string("DefaultFrequency")); intValueKeyNames.push_back(string("MaxFrequency")); intValueKeyNames.push_back(string("MinFrequency")); // intValueKeyNames.push_back(string("DefaultWindowPosX")); // intValueKeyNames.push_back(string("DefaultWindowPosY")); while(!intValueKeyNames.empty()){ string keyName = intValueKeyNames.front(); intValueKeyNames.pop_front(); if(!isInt(config[keyName])){ string message = keyName + string(" variable must be an integer"); throw KasumiException(message, STDERR, KILL); } } // check integer value are suitable int def = str2int(config[string("DefaultFrequency")]); int max = str2int(config[string("MaxFrequency")]); int min = str2int(config[string("MinFrequency")]); if(min < 1){ throw KasumiException(string("MinFrequency must be greater than 0"), STDERR, KILL); }else if(max < min){ throw KasumiException(string("MinFrequency must not be greater than MaxFrequency."), STDERR, KILL); }else if(def > max){ throw KasumiException(string("DefaultFrequency must not be greater than MaxFrequency"), STDERR, KILL); }else if(def < min){ throw KasumiException(string("DefaultFrequency must not be less than MinFrequency"), STDERR, KILL); } // int x = str2int(config[string("DefaultWindowPosX")]); // int y = str2int(config[string("DefaultWindowPosY")]); // if(x < -1){ // throw KasumiException(string("DefaultWindowPosX must be -1 or more"), // STDERR, KILL); // }else if(y < -1){ // throw KasumiException(string("DefaultWindowPosY must be -1 or more"), // STDERR, KILL); // } // check key configurations // throws exeption if there is an invalid key or duplication // map registeredKey; // list keyNames; // keyNames.push_back(string("QuitShortcutKey")); // keyNames.push_back(string("StoreShortcutKey")); // keyNames.push_back(string("NewWordShortcutKey")); // keyNames.push_back(string("RemoveShortcutKey")); // keyNames.push_back(string("AddShortcutKey")); // keyNames.push_back(string("AddingModeShortcutKey")); // keyNames.push_back(string("ManageModeShortcutKey")); // while(!keyNames.empty()){ // string keyName = keyNames.front(); // keyNames.pop_front(); // // string shortKey = config[string(keyName)]; // if(!isValidShortcutKey(shortKey)){ // string message = string("Invalid shortcut key configuration for ") + // keyName + string(": ") + shortKey; // throw KasumiException(message, STDERR, KILL); // } // if(registeredKey.find(shortKey) == registeredKey.end()){ // registeredKey.insert(make_pair(shortKey,keyName)); // }else{ // string message = string("Failed to set ") + keyName + string(" variable; ") + shortKey + string(" has been already registered as ") + registeredKey[shortKey]; // throw KasumiException(message, STDERR, KILL); // } // } // check WordType configuration list keyForWordType; map validWordType; keyForWordType.push_back(string("DefaultWordType")); keyForWordType.push_back(string("DefaultAddingWordType")); WordTypeList::iterator p = KasumiWordType::beginWordTypeList(); while(p != KasumiWordType::endWordTypeList()) { validWordType.insert(make_pair((*p)->getCannaTab(),true)); p++; } while(!keyForWordType.empty()){ string keyName = keyForWordType.front(); keyForWordType.pop_front(); string val = config[keyName]; if(validWordType.find(val) == validWordType.end()){ string message = val + string(" is an invalid word type for ") + keyName; throw KasumiException(message, STDERR, KILL); } } // check conrresponding settings being an boolean list booleanValueKeyNames; booleanValueKeyNames.push_back(string("ImportSelectedText")); while(!booleanValueKeyNames.empty()){ string keyName = booleanValueKeyNames.front(); booleanValueKeyNames.pop_front(); if(config[keyName] != "true" && config[keyName] != "false"){ throw KasumiException(keyName + string(" variable must be a boolean"), STDERR, KILL); } } // no check for: // DefaultSpelling // DefaultSound // DefaultAddingSpelling // DefaultAddingSound // ToDo: confirm default sounds do not have invalid character } void KasumiConfiguration::setPropertyValue(const string &name, const string &value){ map::iterator p; p = config.find(name); if(p == config.end()){ cerr << "error: you cannot set " << name << " property." << endl; exit(1); } config[name] = value; } string KasumiConfiguration::getPropertyValue(const string &name){ map::iterator p; p = config.find(name); if(p == config.end()){ cerr << "error: " << name << " property has not been set yet." << endl; exit(1); } return p->second; } int KasumiConfiguration::getPropertyValueByInt(const string &name){ map::iterator p; p = config.find(name); if(p == config.end()){ cerr << "error: " << name << " property has not been set yet." << endl; exit(1); } return str2int(p->second); } bool KasumiConfiguration::getPropertyValueByBool(const string &name){ map::iterator p; p = config.find(name); if(p == config.end()){ cerr << "error: " << name << " property has not been set yet." << endl; exit(1); } if(p->second == "true"){ return true; } else{ return false; } } /* bool isValidShortcutKey(const string &key){ string::size_type i; i = key.find("+",0); string shortkey = key.substr(i+1); if(shortkey.length() != 1){ return false; } char c = shortkey.c_str()[0]; if((c < 'A' || c > 'Z') && (c < '0' || c > '9')){ return false; } i = key.find("+",0); if(i == key.npos){ return true; } string mask = key.substr(0,i); if(mask == "Ctrl"){ return true; }else if(mask == "Alt"){ return true; } return false; } */ kasumi-2.5/intl/0000777000175000017500000000000011231307557010630 500000000000000kasumi-2.5/intl/ref-add.sin0000644000175000017500000000210110142036016012540 00000000000000# Add this package to a list of references stored in a text file. # # Copyright (C) 2000 Free Software Foundation, Inc. # # This program is free software; you can redistribute it and/or modify it # under the terms of the GNU Library General Public License as published # by the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # Library General Public License for more details. # # You should have received a copy of the GNU Library General Public # License along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, # USA. # # Written by Bruno Haible . # /^# Packages using this file: / { s/# Packages using this file:// ta :a s/ @PACKAGE@ / @PACKAGE@ / tb s/ $/ @PACKAGE@ / :b s/^/# Packages using this file:/ } kasumi-2.5/intl/finddomain.c0000644000175000017500000001303310142036016013005 00000000000000/* Handle list of needed message catalogs Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc. Written by Ulrich Drepper , 1995. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifdef HAVE_CONFIG_H # include #endif #include #include #include #include #if defined HAVE_UNISTD_H || defined _LIBC # include #endif #include "gettextP.h" #ifdef _LIBC # include #else # include "libgnuintl.h" #endif /* @@ end of prolog @@ */ /* List of already loaded domains. */ static struct loaded_l10nfile *_nl_loaded_domains; /* Return a data structure describing the message catalog described by the DOMAINNAME and CATEGORY parameters with respect to the currently established bindings. */ struct loaded_l10nfile * internal_function _nl_find_domain (dirname, locale, domainname, domainbinding) const char *dirname; char *locale; const char *domainname; struct binding *domainbinding; { struct loaded_l10nfile *retval; const char *language; const char *modifier; const char *territory; const char *codeset; const char *normalized_codeset; const char *special; const char *sponsor; const char *revision; const char *alias_value; int mask; /* LOCALE can consist of up to four recognized parts for the XPG syntax: language[_territory[.codeset]][@modifier] and six parts for the CEN syntax: language[_territory][+audience][+special][,[sponsor][_revision]] Beside the first part all of them are allowed to be missing. If the full specified locale is not found, the less specific one are looked for. The various parts will be stripped off according to the following order: (1) revision (2) sponsor (3) special (4) codeset (5) normalized codeset (6) territory (7) audience/modifier */ /* If we have already tested for this locale entry there has to be one data set in the list of loaded domains. */ retval = _nl_make_l10nflist (&_nl_loaded_domains, dirname, strlen (dirname) + 1, 0, locale, NULL, NULL, NULL, NULL, NULL, NULL, NULL, domainname, 0); if (retval != NULL) { /* We know something about this locale. */ int cnt; if (retval->decided == 0) _nl_load_domain (retval, domainbinding); if (retval->data != NULL) return retval; for (cnt = 0; retval->successor[cnt] != NULL; ++cnt) { if (retval->successor[cnt]->decided == 0) _nl_load_domain (retval->successor[cnt], domainbinding); if (retval->successor[cnt]->data != NULL) break; } return cnt >= 0 ? retval : NULL; /* NOTREACHED */ } /* See whether the locale value is an alias. If yes its value *overwrites* the alias name. No test for the original value is done. */ alias_value = _nl_expand_alias (locale); if (alias_value != NULL) { #if defined _LIBC || defined HAVE_STRDUP locale = strdup (alias_value); if (locale == NULL) return NULL; #else size_t len = strlen (alias_value) + 1; locale = (char *) malloc (len); if (locale == NULL) return NULL; memcpy (locale, alias_value, len); #endif } /* Now we determine the single parts of the locale name. First look for the language. Termination symbols are `_' and `@' if we use XPG4 style, and `_', `+', and `,' if we use CEN syntax. */ mask = _nl_explode_name (locale, &language, &modifier, &territory, &codeset, &normalized_codeset, &special, &sponsor, &revision); /* Create all possible locale entries which might be interested in generalization. */ retval = _nl_make_l10nflist (&_nl_loaded_domains, dirname, strlen (dirname) + 1, mask, language, territory, codeset, normalized_codeset, modifier, special, sponsor, revision, domainname, 1); if (retval == NULL) /* This means we are out of core. */ return NULL; if (retval->decided == 0) _nl_load_domain (retval, domainbinding); if (retval->data == NULL) { int cnt; for (cnt = 0; retval->successor[cnt] != NULL; ++cnt) { if (retval->successor[cnt]->decided == 0) _nl_load_domain (retval->successor[cnt], domainbinding); if (retval->successor[cnt]->data != NULL) break; } } /* The room for an alias was dynamically allocated. Free it now. */ if (alias_value != NULL) free (locale); /* The space for normalized_codeset is dynamically allocated. Free it. */ if (mask & XPG_NORM_CODESET) free ((void *) normalized_codeset); return retval; } #ifdef _LIBC libc_freeres_fn (free_mem) { struct loaded_l10nfile *runp = _nl_loaded_domains; while (runp != NULL) { struct loaded_l10nfile *here = runp; if (runp->data != NULL) _nl_unload_domain ((struct loaded_domain *) runp->data); runp = runp->next; free ((char *) here->filename); free (here); } } #endif kasumi-2.5/intl/osdep.c0000644000175000017500000000164310142036016012013 00000000000000/* OS dependent parts of libintl. Copyright (C) 2001-2002 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #if defined __EMX__ # include "os2compat.c" #else /* Avoid AIX compiler warning. */ typedef int dummy; #endif kasumi-2.5/intl/localealias.c0000644000175000017500000002352110142036016013151 00000000000000/* Handle aliases for locale names. Copyright (C) 1995-1999, 2000-2001, 2003 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Tell glibc's to provide a prototype for mempcpy(). This must come before because may include , and once has been included, it's too late. */ #ifndef _GNU_SOURCE # define _GNU_SOURCE 1 #endif #ifdef HAVE_CONFIG_H # include #endif #include #include #if defined _LIBC || defined HAVE___FSETLOCKING # include #endif #include #ifdef __GNUC__ # undef alloca # define alloca __builtin_alloca # define HAVE_ALLOCA 1 #else # ifdef _MSC_VER # include # define alloca _alloca # else # if defined HAVE_ALLOCA_H || defined _LIBC # include # else # ifdef _AIX #pragma alloca # else # ifndef alloca char *alloca (); # endif # endif # endif # endif #endif #include #include #include "gettextP.h" #if ENABLE_RELOCATABLE # include "relocatable.h" #else # define relocate(pathname) (pathname) #endif /* @@ end of prolog @@ */ #ifdef _LIBC /* Rename the non ANSI C functions. This is required by the standard because some ANSI C functions will require linking with this object file and the name space must not be polluted. */ # define strcasecmp __strcasecmp # ifndef mempcpy # define mempcpy __mempcpy # endif # define HAVE_MEMPCPY 1 # define HAVE___FSETLOCKING 1 /* We need locking here since we can be called from different places. */ # include __libc_lock_define_initialized (static, lock); #endif #ifndef internal_function # define internal_function #endif /* Some optimizations for glibc. */ #ifdef _LIBC # define FEOF(fp) feof_unlocked (fp) # define FGETS(buf, n, fp) fgets_unlocked (buf, n, fp) #else # define FEOF(fp) feof (fp) # define FGETS(buf, n, fp) fgets (buf, n, fp) #endif /* For those losing systems which don't have `alloca' we have to add some additional code emulating it. */ #ifdef HAVE_ALLOCA # define freea(p) /* nothing */ #else # define alloca(n) malloc (n) # define freea(p) free (p) #endif #if defined _LIBC_REENTRANT || defined HAVE_FGETS_UNLOCKED # undef fgets # define fgets(buf, len, s) fgets_unlocked (buf, len, s) #endif #if defined _LIBC_REENTRANT || defined HAVE_FEOF_UNLOCKED # undef feof # define feof(s) feof_unlocked (s) #endif struct alias_map { const char *alias; const char *value; }; #ifndef _LIBC # define libc_freeres_ptr(decl) decl #endif libc_freeres_ptr (static char *string_space); static size_t string_space_act; static size_t string_space_max; libc_freeres_ptr (static struct alias_map *map); static size_t nmap; static size_t maxmap; /* Prototypes for local functions. */ static size_t read_alias_file PARAMS ((const char *fname, int fname_len)) internal_function; static int extend_alias_table PARAMS ((void)); static int alias_compare PARAMS ((const struct alias_map *map1, const struct alias_map *map2)); const char * _nl_expand_alias (name) const char *name; { static const char *locale_alias_path; struct alias_map *retval; const char *result = NULL; size_t added; #ifdef _LIBC __libc_lock_lock (lock); #endif if (locale_alias_path == NULL) locale_alias_path = LOCALE_ALIAS_PATH; do { struct alias_map item; item.alias = name; if (nmap > 0) retval = (struct alias_map *) bsearch (&item, map, nmap, sizeof (struct alias_map), (int (*) PARAMS ((const void *, const void *)) ) alias_compare); else retval = NULL; /* We really found an alias. Return the value. */ if (retval != NULL) { result = retval->value; break; } /* Perhaps we can find another alias file. */ added = 0; while (added == 0 && locale_alias_path[0] != '\0') { const char *start; while (locale_alias_path[0] == PATH_SEPARATOR) ++locale_alias_path; start = locale_alias_path; while (locale_alias_path[0] != '\0' && locale_alias_path[0] != PATH_SEPARATOR) ++locale_alias_path; if (start < locale_alias_path) added = read_alias_file (start, locale_alias_path - start); } } while (added != 0); #ifdef _LIBC __libc_lock_unlock (lock); #endif return result; } static size_t internal_function read_alias_file (fname, fname_len) const char *fname; int fname_len; { FILE *fp; char *full_fname; size_t added; static const char aliasfile[] = "/locale.alias"; full_fname = (char *) alloca (fname_len + sizeof aliasfile); #ifdef HAVE_MEMPCPY mempcpy (mempcpy (full_fname, fname, fname_len), aliasfile, sizeof aliasfile); #else memcpy (full_fname, fname, fname_len); memcpy (&full_fname[fname_len], aliasfile, sizeof aliasfile); #endif fp = fopen (relocate (full_fname), "r"); freea (full_fname); if (fp == NULL) return 0; #ifdef HAVE___FSETLOCKING /* No threads present. */ __fsetlocking (fp, FSETLOCKING_BYCALLER); #endif added = 0; while (!FEOF (fp)) { /* It is a reasonable approach to use a fix buffer here because a) we are only interested in the first two fields b) these fields must be usable as file names and so must not be that long We avoid a multi-kilobyte buffer here since this would use up stack space which we might not have if the program ran out of memory. */ char buf[400]; char *alias; char *value; char *cp; if (FGETS (buf, sizeof buf, fp) == NULL) /* EOF reached. */ break; cp = buf; /* Ignore leading white space. */ while (isspace ((unsigned char) cp[0])) ++cp; /* A leading '#' signals a comment line. */ if (cp[0] != '\0' && cp[0] != '#') { alias = cp++; while (cp[0] != '\0' && !isspace ((unsigned char) cp[0])) ++cp; /* Terminate alias name. */ if (cp[0] != '\0') *cp++ = '\0'; /* Now look for the beginning of the value. */ while (isspace ((unsigned char) cp[0])) ++cp; if (cp[0] != '\0') { size_t alias_len; size_t value_len; value = cp++; while (cp[0] != '\0' && !isspace ((unsigned char) cp[0])) ++cp; /* Terminate value. */ if (cp[0] == '\n') { /* This has to be done to make the following test for the end of line possible. We are looking for the terminating '\n' which do not overwrite here. */ *cp++ = '\0'; *cp = '\n'; } else if (cp[0] != '\0') *cp++ = '\0'; if (nmap >= maxmap) if (__builtin_expect (extend_alias_table (), 0)) return added; alias_len = strlen (alias) + 1; value_len = strlen (value) + 1; if (string_space_act + alias_len + value_len > string_space_max) { /* Increase size of memory pool. */ size_t new_size = (string_space_max + (alias_len + value_len > 1024 ? alias_len + value_len : 1024)); char *new_pool = (char *) realloc (string_space, new_size); if (new_pool == NULL) return added; if (__builtin_expect (string_space != new_pool, 0)) { size_t i; for (i = 0; i < nmap; i++) { map[i].alias += new_pool - string_space; map[i].value += new_pool - string_space; } } string_space = new_pool; string_space_max = new_size; } map[nmap].alias = memcpy (&string_space[string_space_act], alias, alias_len); string_space_act += alias_len; map[nmap].value = memcpy (&string_space[string_space_act], value, value_len); string_space_act += value_len; ++nmap; ++added; } } /* Possibly not the whole line fits into the buffer. Ignore the rest of the line. */ while (strchr (buf, '\n') == NULL) if (FGETS (buf, sizeof buf, fp) == NULL) /* Make sure the inner loop will be left. The outer loop will exit at the `feof' test. */ break; } /* Should we test for ferror()? I think we have to silently ignore errors. --drepper */ fclose (fp); if (added > 0) qsort (map, nmap, sizeof (struct alias_map), (int (*) PARAMS ((const void *, const void *))) alias_compare); return added; } static int extend_alias_table () { size_t new_size; struct alias_map *new_map; new_size = maxmap == 0 ? 100 : 2 * maxmap; new_map = (struct alias_map *) realloc (map, (new_size * sizeof (struct alias_map))); if (new_map == NULL) /* Simply don't extend: we don't have any more core. */ return -1; map = new_map; maxmap = new_size; return 0; } static int alias_compare (map1, map2) const struct alias_map *map1; const struct alias_map *map2; { #if defined _LIBC || defined HAVE_STRCASECMP return strcasecmp (map1->alias, map2->alias); #else const unsigned char *p1 = (const unsigned char *) map1->alias; const unsigned char *p2 = (const unsigned char *) map2->alias; unsigned char c1, c2; if (p1 == p2) return 0; do { /* I know this seems to be odd but the tolower() function in some systems libc cannot handle nonalpha characters. */ c1 = isupper (*p1) ? tolower (*p1) : *p1; c2 = isupper (*p2) ? tolower (*p2) : *p2; if (c1 == '\0') break; ++p1; ++p2; } while (c1 == c2); return c1 - c2; #endif } kasumi-2.5/intl/localename.c0000644000175000017500000005412610142036016013005 00000000000000/* Determine the current selected locale. Copyright (C) 1995-1999, 2000-2002 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Written by Ulrich Drepper , 1995. */ /* Win32 code written by Tor Lillqvist . */ #ifdef HAVE_CONFIG_H # include #endif #include #include #if defined _WIN32 || defined __WIN32__ # undef WIN32 /* avoid warning on mingw32 */ # define WIN32 #endif #ifdef WIN32 # define WIN32_LEAN_AND_MEAN # include /* Mingw headers don't have latest language and sublanguage codes. */ # ifndef LANG_AFRIKAANS # define LANG_AFRIKAANS 0x36 # endif # ifndef LANG_ALBANIAN # define LANG_ALBANIAN 0x1c # endif # ifndef LANG_ARABIC # define LANG_ARABIC 0x01 # endif # ifndef LANG_ARMENIAN # define LANG_ARMENIAN 0x2b # endif # ifndef LANG_ASSAMESE # define LANG_ASSAMESE 0x4d # endif # ifndef LANG_AZERI # define LANG_AZERI 0x2c # endif # ifndef LANG_BASQUE # define LANG_BASQUE 0x2d # endif # ifndef LANG_BELARUSIAN # define LANG_BELARUSIAN 0x23 # endif # ifndef LANG_BENGALI # define LANG_BENGALI 0x45 # endif # ifndef LANG_CATALAN # define LANG_CATALAN 0x03 # endif # ifndef LANG_DIVEHI # define LANG_DIVEHI 0x65 # endif # ifndef LANG_ESTONIAN # define LANG_ESTONIAN 0x25 # endif # ifndef LANG_FAEROESE # define LANG_FAEROESE 0x38 # endif # ifndef LANG_FARSI # define LANG_FARSI 0x29 # endif # ifndef LANG_GALICIAN # define LANG_GALICIAN 0x56 # endif # ifndef LANG_GEORGIAN # define LANG_GEORGIAN 0x37 # endif # ifndef LANG_GUJARATI # define LANG_GUJARATI 0x47 # endif # ifndef LANG_HEBREW # define LANG_HEBREW 0x0d # endif # ifndef LANG_HINDI # define LANG_HINDI 0x39 # endif # ifndef LANG_INDONESIAN # define LANG_INDONESIAN 0x21 # endif # ifndef LANG_KANNADA # define LANG_KANNADA 0x4b # endif # ifndef LANG_KASHMIRI # define LANG_KASHMIRI 0x60 # endif # ifndef LANG_KAZAK # define LANG_KAZAK 0x3f # endif # ifndef LANG_KONKANI # define LANG_KONKANI 0x57 # endif # ifndef LANG_KYRGYZ # define LANG_KYRGYZ 0x40 # endif # ifndef LANG_LATVIAN # define LANG_LATVIAN 0x26 # endif # ifndef LANG_LITHUANIAN # define LANG_LITHUANIAN 0x27 # endif # ifndef LANG_MACEDONIAN # define LANG_MACEDONIAN 0x2f # endif # ifndef LANG_MALAY # define LANG_MALAY 0x3e # endif # ifndef LANG_MALAYALAM # define LANG_MALAYALAM 0x4c # endif # ifndef LANG_MANIPURI # define LANG_MANIPURI 0x58 # endif # ifndef LANG_MARATHI # define LANG_MARATHI 0x4e # endif # ifndef LANG_MONGOLIAN # define LANG_MONGOLIAN 0x50 # endif # ifndef LANG_NEPALI # define LANG_NEPALI 0x61 # endif # ifndef LANG_ORIYA # define LANG_ORIYA 0x48 # endif # ifndef LANG_PUNJABI # define LANG_PUNJABI 0x46 # endif # ifndef LANG_SANSKRIT # define LANG_SANSKRIT 0x4f # endif # ifndef LANG_SERBIAN # define LANG_SERBIAN 0x1a # endif # ifndef LANG_SINDHI # define LANG_SINDHI 0x59 # endif # ifndef LANG_SLOVAK # define LANG_SLOVAK 0x1b # endif # ifndef LANG_SORBIAN # define LANG_SORBIAN 0x2e # endif # ifndef LANG_SWAHILI # define LANG_SWAHILI 0x41 # endif # ifndef LANG_SYRIAC # define LANG_SYRIAC 0x5a # endif # ifndef LANG_TAMIL # define LANG_TAMIL 0x49 # endif # ifndef LANG_TATAR # define LANG_TATAR 0x44 # endif # ifndef LANG_TELUGU # define LANG_TELUGU 0x4a # endif # ifndef LANG_THAI # define LANG_THAI 0x1e # endif # ifndef LANG_UKRAINIAN # define LANG_UKRAINIAN 0x22 # endif # ifndef LANG_URDU # define LANG_URDU 0x20 # endif # ifndef LANG_UZBEK # define LANG_UZBEK 0x43 # endif # ifndef LANG_VIETNAMESE # define LANG_VIETNAMESE 0x2a # endif # ifndef SUBLANG_ARABIC_SAUDI_ARABIA # define SUBLANG_ARABIC_SAUDI_ARABIA 0x01 # endif # ifndef SUBLANG_ARABIC_IRAQ # define SUBLANG_ARABIC_IRAQ 0x02 # endif # ifndef SUBLANG_ARABIC_EGYPT # define SUBLANG_ARABIC_EGYPT 0x03 # endif # ifndef SUBLANG_ARABIC_LIBYA # define SUBLANG_ARABIC_LIBYA 0x04 # endif # ifndef SUBLANG_ARABIC_ALGERIA # define SUBLANG_ARABIC_ALGERIA 0x05 # endif # ifndef SUBLANG_ARABIC_MOROCCO # define SUBLANG_ARABIC_MOROCCO 0x06 # endif # ifndef SUBLANG_ARABIC_TUNISIA # define SUBLANG_ARABIC_TUNISIA 0x07 # endif # ifndef SUBLANG_ARABIC_OMAN # define SUBLANG_ARABIC_OMAN 0x08 # endif # ifndef SUBLANG_ARABIC_YEMEN # define SUBLANG_ARABIC_YEMEN 0x09 # endif # ifndef SUBLANG_ARABIC_SYRIA # define SUBLANG_ARABIC_SYRIA 0x0a # endif # ifndef SUBLANG_ARABIC_JORDAN # define SUBLANG_ARABIC_JORDAN 0x0b # endif # ifndef SUBLANG_ARABIC_LEBANON # define SUBLANG_ARABIC_LEBANON 0x0c # endif # ifndef SUBLANG_ARABIC_KUWAIT # define SUBLANG_ARABIC_KUWAIT 0x0d # endif # ifndef SUBLANG_ARABIC_UAE # define SUBLANG_ARABIC_UAE 0x0e # endif # ifndef SUBLANG_ARABIC_BAHRAIN # define SUBLANG_ARABIC_BAHRAIN 0x0f # endif # ifndef SUBLANG_ARABIC_QATAR # define SUBLANG_ARABIC_QATAR 0x10 # endif # ifndef SUBLANG_AZERI_LATIN # define SUBLANG_AZERI_LATIN 0x01 # endif # ifndef SUBLANG_AZERI_CYRILLIC # define SUBLANG_AZERI_CYRILLIC 0x02 # endif # ifndef SUBLANG_CHINESE_MACAU # define SUBLANG_CHINESE_MACAU 0x05 # endif # ifndef SUBLANG_ENGLISH_SOUTH_AFRICA # define SUBLANG_ENGLISH_SOUTH_AFRICA 0x07 # endif # ifndef SUBLANG_ENGLISH_JAMAICA # define SUBLANG_ENGLISH_JAMAICA 0x08 # endif # ifndef SUBLANG_ENGLISH_CARIBBEAN # define SUBLANG_ENGLISH_CARIBBEAN 0x09 # endif # ifndef SUBLANG_ENGLISH_BELIZE # define SUBLANG_ENGLISH_BELIZE 0x0a # endif # ifndef SUBLANG_ENGLISH_TRINIDAD # define SUBLANG_ENGLISH_TRINIDAD 0x0b # endif # ifndef SUBLANG_ENGLISH_ZIMBABWE # define SUBLANG_ENGLISH_ZIMBABWE 0x0c # endif # ifndef SUBLANG_ENGLISH_PHILIPPINES # define SUBLANG_ENGLISH_PHILIPPINES 0x0d # endif # ifndef SUBLANG_FRENCH_LUXEMBOURG # define SUBLANG_FRENCH_LUXEMBOURG 0x05 # endif # ifndef SUBLANG_FRENCH_MONACO # define SUBLANG_FRENCH_MONACO 0x06 # endif # ifndef SUBLANG_GERMAN_LUXEMBOURG # define SUBLANG_GERMAN_LUXEMBOURG 0x04 # endif # ifndef SUBLANG_GERMAN_LIECHTENSTEIN # define SUBLANG_GERMAN_LIECHTENSTEIN 0x05 # endif # ifndef SUBLANG_KASHMIRI_INDIA # define SUBLANG_KASHMIRI_INDIA 0x02 # endif # ifndef SUBLANG_MALAY_MALAYSIA # define SUBLANG_MALAY_MALAYSIA 0x01 # endif # ifndef SUBLANG_MALAY_BRUNEI_DARUSSALAM # define SUBLANG_MALAY_BRUNEI_DARUSSALAM 0x02 # endif # ifndef SUBLANG_NEPALI_INDIA # define SUBLANG_NEPALI_INDIA 0x02 # endif # ifndef SUBLANG_SERBIAN_LATIN # define SUBLANG_SERBIAN_LATIN 0x02 # endif # ifndef SUBLANG_SERBIAN_CYRILLIC # define SUBLANG_SERBIAN_CYRILLIC 0x03 # endif # ifndef SUBLANG_SPANISH_GUATEMALA # define SUBLANG_SPANISH_GUATEMALA 0x04 # endif # ifndef SUBLANG_SPANISH_COSTA_RICA # define SUBLANG_SPANISH_COSTA_RICA 0x05 # endif # ifndef SUBLANG_SPANISH_PANAMA # define SUBLANG_SPANISH_PANAMA 0x06 # endif # ifndef SUBLANG_SPANISH_DOMINICAN_REPUBLIC # define SUBLANG_SPANISH_DOMINICAN_REPUBLIC 0x07 # endif # ifndef SUBLANG_SPANISH_VENEZUELA # define SUBLANG_SPANISH_VENEZUELA 0x08 # endif # ifndef SUBLANG_SPANISH_COLOMBIA # define SUBLANG_SPANISH_COLOMBIA 0x09 # endif # ifndef SUBLANG_SPANISH_PERU # define SUBLANG_SPANISH_PERU 0x0a # endif # ifndef SUBLANG_SPANISH_ARGENTINA # define SUBLANG_SPANISH_ARGENTINA 0x0b # endif # ifndef SUBLANG_SPANISH_ECUADOR # define SUBLANG_SPANISH_ECUADOR 0x0c # endif # ifndef SUBLANG_SPANISH_CHILE # define SUBLANG_SPANISH_CHILE 0x0d # endif # ifndef SUBLANG_SPANISH_URUGUAY # define SUBLANG_SPANISH_URUGUAY 0x0e # endif # ifndef SUBLANG_SPANISH_PARAGUAY # define SUBLANG_SPANISH_PARAGUAY 0x0f # endif # ifndef SUBLANG_SPANISH_BOLIVIA # define SUBLANG_SPANISH_BOLIVIA 0x10 # endif # ifndef SUBLANG_SPANISH_EL_SALVADOR # define SUBLANG_SPANISH_EL_SALVADOR 0x11 # endif # ifndef SUBLANG_SPANISH_HONDURAS # define SUBLANG_SPANISH_HONDURAS 0x12 # endif # ifndef SUBLANG_SPANISH_NICARAGUA # define SUBLANG_SPANISH_NICARAGUA 0x13 # endif # ifndef SUBLANG_SPANISH_PUERTO_RICO # define SUBLANG_SPANISH_PUERTO_RICO 0x14 # endif # ifndef SUBLANG_SWEDISH_FINLAND # define SUBLANG_SWEDISH_FINLAND 0x02 # endif # ifndef SUBLANG_URDU_PAKISTAN # define SUBLANG_URDU_PAKISTAN 0x01 # endif # ifndef SUBLANG_URDU_INDIA # define SUBLANG_URDU_INDIA 0x02 # endif # ifndef SUBLANG_UZBEK_LATIN # define SUBLANG_UZBEK_LATIN 0x01 # endif # ifndef SUBLANG_UZBEK_CYRILLIC # define SUBLANG_UZBEK_CYRILLIC 0x02 # endif #endif /* XPG3 defines the result of 'setlocale (category, NULL)' as: "Directs 'setlocale()' to query 'category' and return the current setting of 'local'." However it does not specify the exact format. Neither do SUSV2 and ISO C 99. So we can use this feature only on selected systems (e.g. those using GNU C Library). */ #if defined _LIBC || (defined __GNU_LIBRARY__ && __GNU_LIBRARY__ >= 2) # define HAVE_LOCALE_NULL #endif /* Determine the current locale's name, and canonicalize it into XPG syntax language[_territory[.codeset]][@modifier] The codeset part in the result is not reliable; the locale_charset() should be used for codeset information instead. The result must not be freed; it is statically allocated. */ const char * _nl_locale_name (category, categoryname) int category; const char *categoryname; { const char *retval; #ifndef WIN32 /* Use the POSIX methods of looking to 'LC_ALL', 'LC_xxx', and 'LANG'. On some systems this can be done by the 'setlocale' function itself. */ # if defined HAVE_SETLOCALE && defined HAVE_LC_MESSAGES && defined HAVE_LOCALE_NULL retval = setlocale (category, NULL); # else /* Setting of LC_ALL overwrites all other. */ retval = getenv ("LC_ALL"); if (retval == NULL || retval[0] == '\0') { /* Next comes the name of the desired category. */ retval = getenv (categoryname); if (retval == NULL || retval[0] == '\0') { /* Last possibility is the LANG environment variable. */ retval = getenv ("LANG"); if (retval == NULL || retval[0] == '\0') /* We use C as the default domain. POSIX says this is implementation defined. */ retval = "C"; } } # endif return retval; #else /* WIN32 */ /* Return an XPG style locale name language[_territory][@modifier]. Don't even bother determining the codeset; it's not useful in this context, because message catalogs are not specific to a single codeset. */ LCID lcid; LANGID langid; int primary, sub; /* Let the user override the system settings through environment variables, as on POSIX systems. */ retval = getenv ("LC_ALL"); if (retval != NULL && retval[0] != '\0') return retval; retval = getenv (categoryname); if (retval != NULL && retval[0] != '\0') return retval; retval = getenv ("LANG"); if (retval != NULL && retval[0] != '\0') return retval; /* Use native Win32 API locale ID. */ lcid = GetThreadLocale (); /* Strip off the sorting rules, keep only the language part. */ langid = LANGIDFROMLCID (lcid); /* Split into language and territory part. */ primary = PRIMARYLANGID (langid); sub = SUBLANGID (langid); /* Dispatch on language. See also http://www.unicode.org/unicode/onlinedat/languages.html . For details about languages, see http://www.ethnologue.com/ . */ switch (primary) { case LANG_AFRIKAANS: return "af_ZA"; case LANG_ALBANIAN: return "sq_AL"; case 0x5e: /* AMHARIC */ return "am_ET"; case LANG_ARABIC: switch (sub) { case SUBLANG_ARABIC_SAUDI_ARABIA: return "ar_SA"; case SUBLANG_ARABIC_IRAQ: return "ar_IQ"; case SUBLANG_ARABIC_EGYPT: return "ar_EG"; case SUBLANG_ARABIC_LIBYA: return "ar_LY"; case SUBLANG_ARABIC_ALGERIA: return "ar_DZ"; case SUBLANG_ARABIC_MOROCCO: return "ar_MA"; case SUBLANG_ARABIC_TUNISIA: return "ar_TN"; case SUBLANG_ARABIC_OMAN: return "ar_OM"; case SUBLANG_ARABIC_YEMEN: return "ar_YE"; case SUBLANG_ARABIC_SYRIA: return "ar_SY"; case SUBLANG_ARABIC_JORDAN: return "ar_JO"; case SUBLANG_ARABIC_LEBANON: return "ar_LB"; case SUBLANG_ARABIC_KUWAIT: return "ar_KW"; case SUBLANG_ARABIC_UAE: return "ar_AE"; case SUBLANG_ARABIC_BAHRAIN: return "ar_BH"; case SUBLANG_ARABIC_QATAR: return "ar_QA"; } return "ar"; case LANG_ARMENIAN: return "hy_AM"; case LANG_ASSAMESE: return "as_IN"; case LANG_AZERI: switch (sub) { /* FIXME: Adjust this when Azerbaijani locales appear on Unix. */ case SUBLANG_AZERI_LATIN: return "az_AZ@latin"; case SUBLANG_AZERI_CYRILLIC: return "az_AZ@cyrillic"; } return "az"; case LANG_BASQUE: return "eu"; /* Ambiguous: could be "eu_ES" or "eu_FR". */ case LANG_BELARUSIAN: return "be_BY"; case LANG_BENGALI: return "bn_IN"; case LANG_BULGARIAN: return "bg_BG"; case 0x55: /* BURMESE */ return "my_MM"; case 0x53: /* CAMBODIAN */ return "km_KH"; case LANG_CATALAN: return "ca_ES"; case 0x5c: /* CHEROKEE */ return "chr_US"; case LANG_CHINESE: switch (sub) { case SUBLANG_CHINESE_TRADITIONAL: return "zh_TW"; case SUBLANG_CHINESE_SIMPLIFIED: return "zh_CN"; case SUBLANG_CHINESE_HONGKONG: return "zh_HK"; case SUBLANG_CHINESE_SINGAPORE: return "zh_SG"; case SUBLANG_CHINESE_MACAU: return "zh_MO"; } return "zh"; case LANG_CROATIAN: /* LANG_CROATIAN == LANG_SERBIAN * What used to be called Serbo-Croatian * should really now be two separate * languages because of political reasons. * (Says tml, who knows nothing about Serbian * or Croatian.) * (I can feel those flames coming already.) */ switch (sub) { case SUBLANG_DEFAULT: return "hr_HR"; case SUBLANG_SERBIAN_LATIN: return "sr_YU"; case SUBLANG_SERBIAN_CYRILLIC: return "sr_YU@cyrillic"; } return "hr"; case LANG_CZECH: return "cs_CZ"; case LANG_DANISH: return "da_DK"; case LANG_DIVEHI: return "div_MV"; case LANG_DUTCH: switch (sub) { case SUBLANG_DUTCH: return "nl_NL"; case SUBLANG_DUTCH_BELGIAN: /* FLEMISH, VLAAMS */ return "nl_BE"; } return "nl"; case 0x66: /* EDO */ return "bin_NG"; case LANG_ENGLISH: switch (sub) { /* SUBLANG_ENGLISH_US == SUBLANG_DEFAULT. Heh. I thought * English was the language spoken in England. * Oh well. */ case SUBLANG_ENGLISH_US: return "en_US"; case SUBLANG_ENGLISH_UK: return "en_GB"; case SUBLANG_ENGLISH_AUS: return "en_AU"; case SUBLANG_ENGLISH_CAN: return "en_CA"; case SUBLANG_ENGLISH_NZ: return "en_NZ"; case SUBLANG_ENGLISH_EIRE: return "en_IE"; case SUBLANG_ENGLISH_SOUTH_AFRICA: return "en_ZA"; case SUBLANG_ENGLISH_JAMAICA: return "en_JM"; case SUBLANG_ENGLISH_CARIBBEAN: return "en_GD"; /* Grenada? */ case SUBLANG_ENGLISH_BELIZE: return "en_BZ"; case SUBLANG_ENGLISH_TRINIDAD: return "en_TT"; case SUBLANG_ENGLISH_ZIMBABWE: return "en_ZW"; case SUBLANG_ENGLISH_PHILIPPINES: return "en_PH"; } return "en"; case LANG_ESTONIAN: return "et_EE"; case LANG_FAEROESE: return "fo_FO"; case LANG_FARSI: return "fa_IR"; case LANG_FINNISH: return "fi_FI"; case LANG_FRENCH: switch (sub) { case SUBLANG_FRENCH: return "fr_FR"; case SUBLANG_FRENCH_BELGIAN: /* WALLOON */ return "fr_BE"; case SUBLANG_FRENCH_CANADIAN: return "fr_CA"; case SUBLANG_FRENCH_SWISS: return "fr_CH"; case SUBLANG_FRENCH_LUXEMBOURG: return "fr_LU"; case SUBLANG_FRENCH_MONACO: return "fr_MC"; } return "fr"; case 0x62: /* FRISIAN */ return "fy_NL"; case 0x67: /* FULFULDE */ return "ful_NG"; case 0x3c: /* GAELIC */ switch (sub) { case 0x01: /* SCOTTISH */ return "gd_GB"; case 0x02: /* IRISH */ return "ga_IE"; } return "C"; case LANG_GALICIAN: return "gl_ES"; case LANG_GEORGIAN: return "ka_GE"; case LANG_GERMAN: switch (sub) { case SUBLANG_GERMAN: return "de_DE"; case SUBLANG_GERMAN_SWISS: return "de_CH"; case SUBLANG_GERMAN_AUSTRIAN: return "de_AT"; case SUBLANG_GERMAN_LUXEMBOURG: return "de_LU"; case SUBLANG_GERMAN_LIECHTENSTEIN: return "de_LI"; } return "de"; case LANG_GREEK: return "el_GR"; case 0x74: /* GUARANI */ return "gn_PY"; case LANG_GUJARATI: return "gu_IN"; case 0x68: /* HAUSA */ return "ha_NG"; case 0x75: /* HAWAIIAN */ /* FIXME: Do they mean Hawaiian ("haw_US", 1000 speakers) or Hawaii Creole English ("cpe_US", 600000 speakers)? */ return "cpe_US"; case LANG_HEBREW: return "he_IL"; case LANG_HINDI: return "hi_IN"; case LANG_HUNGARIAN: return "hu_HU"; case 0x69: /* IBIBIO */ return "nic_NG"; case LANG_ICELANDIC: return "is_IS"; case 0x70: /* IGBO */ return "ibo_NG"; case LANG_INDONESIAN: return "id_ID"; case 0x5d: /* INUKTITUT */ return "iu_CA"; case LANG_ITALIAN: switch (sub) { case SUBLANG_ITALIAN: return "it_IT"; case SUBLANG_ITALIAN_SWISS: return "it_CH"; } return "it"; case LANG_JAPANESE: return "ja_JP"; case LANG_KANNADA: return "kn_IN"; case 0x71: /* KANURI */ return "kau_NG"; case LANG_KASHMIRI: switch (sub) { case SUBLANG_DEFAULT: return "ks_PK"; case SUBLANG_KASHMIRI_INDIA: return "ks_IN"; } return "ks"; case LANG_KAZAK: return "kk_KZ"; case LANG_KONKANI: /* FIXME: Adjust this when such locales appear on Unix. */ return "kok_IN"; case LANG_KOREAN: return "ko_KR"; case LANG_KYRGYZ: return "ky_KG"; case 0x54: /* LAO */ return "lo_LA"; case 0x76: /* LATIN */ return "la_VA"; case LANG_LATVIAN: return "lv_LV"; case LANG_LITHUANIAN: return "lt_LT"; case LANG_MACEDONIAN: return "mk_MK"; case LANG_MALAY: switch (sub) { case SUBLANG_MALAY_MALAYSIA: return "ms_MY"; case SUBLANG_MALAY_BRUNEI_DARUSSALAM: return "ms_BN"; } return "ms"; case LANG_MALAYALAM: return "ml_IN"; case 0x3a: /* MALTESE */ return "mt_MT"; case LANG_MANIPURI: /* FIXME: Adjust this when such locales appear on Unix. */ return "mni_IN"; case LANG_MARATHI: return "mr_IN"; case LANG_MONGOLIAN: return "mn"; /* Ambiguous: could be "mn_CN" or "mn_MN". */ case LANG_NEPALI: switch (sub) { case SUBLANG_DEFAULT: return "ne_NP"; case SUBLANG_NEPALI_INDIA: return "ne_IN"; } return "ne"; case LANG_NORWEGIAN: switch (sub) { case SUBLANG_NORWEGIAN_BOKMAL: return "no_NO"; case SUBLANG_NORWEGIAN_NYNORSK: return "nn_NO"; } return "no"; case LANG_ORIYA: return "or_IN"; case 0x72: /* OROMO */ return "om_ET"; case 0x79: /* PAPIAMENTU */ return "pap_AN"; case 0x63: /* PASHTO */ return "ps"; /* Ambiguous: could be "ps_PK" or "ps_AF". */ case LANG_POLISH: return "pl_PL"; case LANG_PORTUGUESE: switch (sub) { case SUBLANG_PORTUGUESE: return "pt_PT"; /* Hmm. SUBLANG_PORTUGUESE_BRAZILIAN == SUBLANG_DEFAULT. Same phenomenon as SUBLANG_ENGLISH_US == SUBLANG_DEFAULT. */ case SUBLANG_PORTUGUESE_BRAZILIAN: return "pt_BR"; } return "pt"; case LANG_PUNJABI: return "pa_IN"; case 0x17: /* RHAETO-ROMANCE */ return "rm_CH"; case LANG_ROMANIAN: return "ro_RO"; case LANG_RUSSIAN: return "ru"; /* Ambiguous: could be "ru_RU" or "ru_UA". */ case 0x3b: /* SAMI */ return "se_NO"; case LANG_SANSKRIT: return "sa_IN"; case LANG_SINDHI: return "sd"; case 0x5b: /* SINHALESE */ return "si_LK"; case LANG_SLOVAK: return "sk_SK"; case LANG_SLOVENIAN: return "sl_SI"; case 0x77: /* SOMALI */ return "so_SO"; case LANG_SORBIAN: /* FIXME: Adjust this when such locales appear on Unix. */ return "wen_DE"; case LANG_SPANISH: switch (sub) { case SUBLANG_SPANISH: return "es_ES"; case SUBLANG_SPANISH_MEXICAN: return "es_MX"; case SUBLANG_SPANISH_MODERN: return "es_ES@modern"; /* not seen on Unix */ case SUBLANG_SPANISH_GUATEMALA: return "es_GT"; case SUBLANG_SPANISH_COSTA_RICA: return "es_CR"; case SUBLANG_SPANISH_PANAMA: return "es_PA"; case SUBLANG_SPANISH_DOMINICAN_REPUBLIC: return "es_DO"; case SUBLANG_SPANISH_VENEZUELA: return "es_VE"; case SUBLANG_SPANISH_COLOMBIA: return "es_CO"; case SUBLANG_SPANISH_PERU: return "es_PE"; case SUBLANG_SPANISH_ARGENTINA: return "es_AR"; case SUBLANG_SPANISH_ECUADOR: return "es_EC"; case SUBLANG_SPANISH_CHILE: return "es_CL"; case SUBLANG_SPANISH_URUGUAY: return "es_UY"; case SUBLANG_SPANISH_PARAGUAY: return "es_PY"; case SUBLANG_SPANISH_BOLIVIA: return "es_BO"; case SUBLANG_SPANISH_EL_SALVADOR: return "es_SV"; case SUBLANG_SPANISH_HONDURAS: return "es_HN"; case SUBLANG_SPANISH_NICARAGUA: return "es_NI"; case SUBLANG_SPANISH_PUERTO_RICO: return "es_PR"; } return "es"; case 0x30: /* SUTU */ return "bnt_TZ"; case LANG_SWAHILI: return "sw_KE"; case LANG_SWEDISH: switch (sub) { case SUBLANG_DEFAULT: return "sv_SE"; case SUBLANG_SWEDISH_FINLAND: return "sv_FI"; } return "sv"; case LANG_SYRIAC: return "syr_TR"; /* An extinct language. */ case 0x64: /* TAGALOG */ return "tl_PH"; case 0x28: /* TAJIK */ return "tg_TJ"; case 0x5f: /* TAMAZIGHT */ return "ber_MA"; case LANG_TAMIL: return "ta"; /* Ambiguous: could be "ta_IN" or "ta_LK" or "ta_SG". */ case LANG_TATAR: return "tt_RU"; case LANG_TELUGU: return "te_IN"; case LANG_THAI: return "th_TH"; case 0x51: /* TIBETAN */ return "bo_CN"; case 0x73: /* TIGRINYA */ return "ti_ET"; case 0x31: /* TSONGA */ return "ts_ZA"; case LANG_TURKISH: return "tr_TR"; case 0x42: /* TURKMEN */ return "tk_TM"; case LANG_UKRAINIAN: return "uk_UA"; case LANG_URDU: switch (sub) { case SUBLANG_URDU_PAKISTAN: return "ur_PK"; case SUBLANG_URDU_INDIA: return "ur_IN"; } return "ur"; case LANG_UZBEK: switch (sub) { /* FIXME: Adjust this when Uzbek locales appear on Unix. */ case SUBLANG_UZBEK_LATIN: return "uz_UZ@latin"; case SUBLANG_UZBEK_CYRILLIC: return "uz_UZ@cyrillic"; } return "uz"; case 0x33: /* VENDA */ return "ven_ZA"; case LANG_VIETNAMESE: return "vi_VN"; case 0x52: /* WELSH */ return "cy_GB"; case 0x34: /* XHOSA */ return "xh_ZA"; case 0x78: /* YI */ return "sit_CN"; case 0x3d: /* YIDDISH */ return "yi_IL"; case 0x6a: /* YORUBA */ return "yo_NG"; case 0x35: /* ZULU */ return "zu_ZA"; default: return "C"; } #endif } kasumi-2.5/intl/intl-compat.c0000644000175000017500000000712010142036016013124 00000000000000/* intl-compat.c - Stub functions to call gettext functions from GNU gettext Library. Copyright (C) 1995, 2000-2003 Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifdef HAVE_CONFIG_H # include #endif #include "gettextP.h" /* @@ end of prolog @@ */ /* This file redirects the gettext functions (without prefix) to those defined in the included GNU libintl library (with "libintl_" prefix). It is compiled into libintl in order to make the AM_GNU_GETTEXT test of gettext <= 0.11.2 work with the libintl library >= 0.11.3 which has the redirections primarily in the include file. It is also compiled into libgnuintl so that libgnuintl.so can be used as LD_PRELOADable library on glibc systems, to provide the extra features that the functions in the libc don't have (namely, logging). */ #undef gettext #undef dgettext #undef dcgettext #undef ngettext #undef dngettext #undef dcngettext #undef textdomain #undef bindtextdomain #undef bind_textdomain_codeset /* When building a DLL, we must export some functions. Note that because the functions are only defined for binary backward compatibility, we don't need to use __declspec(dllimport) in any case. */ #if defined _MSC_VER && BUILDING_DLL # define DLL_EXPORTED __declspec(dllexport) #else # define DLL_EXPORTED #endif DLL_EXPORTED char * gettext (msgid) const char *msgid; { return libintl_gettext (msgid); } DLL_EXPORTED char * dgettext (domainname, msgid) const char *domainname; const char *msgid; { return libintl_dgettext (domainname, msgid); } DLL_EXPORTED char * dcgettext (domainname, msgid, category) const char *domainname; const char *msgid; int category; { return libintl_dcgettext (domainname, msgid, category); } DLL_EXPORTED char * ngettext (msgid1, msgid2, n) const char *msgid1; const char *msgid2; unsigned long int n; { return libintl_ngettext (msgid1, msgid2, n); } DLL_EXPORTED char * dngettext (domainname, msgid1, msgid2, n) const char *domainname; const char *msgid1; const char *msgid2; unsigned long int n; { return libintl_dngettext (domainname, msgid1, msgid2, n); } DLL_EXPORTED char * dcngettext (domainname, msgid1, msgid2, n, category) const char *domainname; const char *msgid1; const char *msgid2; unsigned long int n; int category; { return libintl_dcngettext (domainname, msgid1, msgid2, n, category); } DLL_EXPORTED char * textdomain (domainname) const char *domainname; { return libintl_textdomain (domainname); } DLL_EXPORTED char * bindtextdomain (domainname, dirname) const char *domainname; const char *dirname; { return libintl_bindtextdomain (domainname, dirname); } DLL_EXPORTED char * bind_textdomain_codeset (domainname, codeset) const char *domainname; const char *codeset; { return libintl_bind_textdomain_codeset (domainname, codeset); } kasumi-2.5/intl/loadmsgcat.c0000644000175000017500000010333010142036016013013 00000000000000/* Load needed message catalogs. Copyright (C) 1995-1999, 2000-2003 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Tell glibc's to provide a prototype for mempcpy(). This must come before because may include , and once has been included, it's too late. */ #ifndef _GNU_SOURCE # define _GNU_SOURCE 1 #endif #ifdef HAVE_CONFIG_H # include #endif #include #include #include #include #include #ifdef __GNUC__ # undef alloca # define alloca __builtin_alloca # define HAVE_ALLOCA 1 #else # ifdef _MSC_VER # include # define alloca _alloca # else # if defined HAVE_ALLOCA_H || defined _LIBC # include # else # ifdef _AIX #pragma alloca # else # ifndef alloca char *alloca (); # endif # endif # endif # endif #endif #include #include #if defined HAVE_UNISTD_H || defined _LIBC # include #endif #ifdef _LIBC # include # include #endif #if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \ || (defined _LIBC && defined _POSIX_MAPPED_FILES) # include # undef HAVE_MMAP # define HAVE_MMAP 1 #else # undef HAVE_MMAP #endif #if defined HAVE_STDINT_H_WITH_UINTMAX || defined _LIBC # include #endif #if defined HAVE_INTTYPES_H || defined _LIBC # include #endif #include "gmo.h" #include "gettextP.h" #include "hash-string.h" #include "plural-exp.h" #ifdef _LIBC # include "../locale/localeinfo.h" #endif /* Provide fallback values for macros that ought to be defined in . Note that our fallback values need not be literal strings, because we don't use them with preprocessor string concatenation. */ #if !defined PRId8 || PRI_MACROS_BROKEN # undef PRId8 # define PRId8 "d" #endif #if !defined PRIi8 || PRI_MACROS_BROKEN # undef PRIi8 # define PRIi8 "i" #endif #if !defined PRIo8 || PRI_MACROS_BROKEN # undef PRIo8 # define PRIo8 "o" #endif #if !defined PRIu8 || PRI_MACROS_BROKEN # undef PRIu8 # define PRIu8 "u" #endif #if !defined PRIx8 || PRI_MACROS_BROKEN # undef PRIx8 # define PRIx8 "x" #endif #if !defined PRIX8 || PRI_MACROS_BROKEN # undef PRIX8 # define PRIX8 "X" #endif #if !defined PRId16 || PRI_MACROS_BROKEN # undef PRId16 # define PRId16 "d" #endif #if !defined PRIi16 || PRI_MACROS_BROKEN # undef PRIi16 # define PRIi16 "i" #endif #if !defined PRIo16 || PRI_MACROS_BROKEN # undef PRIo16 # define PRIo16 "o" #endif #if !defined PRIu16 || PRI_MACROS_BROKEN # undef PRIu16 # define PRIu16 "u" #endif #if !defined PRIx16 || PRI_MACROS_BROKEN # undef PRIx16 # define PRIx16 "x" #endif #if !defined PRIX16 || PRI_MACROS_BROKEN # undef PRIX16 # define PRIX16 "X" #endif #if !defined PRId32 || PRI_MACROS_BROKEN # undef PRId32 # define PRId32 "d" #endif #if !defined PRIi32 || PRI_MACROS_BROKEN # undef PRIi32 # define PRIi32 "i" #endif #if !defined PRIo32 || PRI_MACROS_BROKEN # undef PRIo32 # define PRIo32 "o" #endif #if !defined PRIu32 || PRI_MACROS_BROKEN # undef PRIu32 # define PRIu32 "u" #endif #if !defined PRIx32 || PRI_MACROS_BROKEN # undef PRIx32 # define PRIx32 "x" #endif #if !defined PRIX32 || PRI_MACROS_BROKEN # undef PRIX32 # define PRIX32 "X" #endif #if !defined PRId64 || PRI_MACROS_BROKEN # undef PRId64 # define PRId64 (sizeof (long) == 8 ? "ld" : "lld") #endif #if !defined PRIi64 || PRI_MACROS_BROKEN # undef PRIi64 # define PRIi64 (sizeof (long) == 8 ? "li" : "lli") #endif #if !defined PRIo64 || PRI_MACROS_BROKEN # undef PRIo64 # define PRIo64 (sizeof (long) == 8 ? "lo" : "llo") #endif #if !defined PRIu64 || PRI_MACROS_BROKEN # undef PRIu64 # define PRIu64 (sizeof (long) == 8 ? "lu" : "llu") #endif #if !defined PRIx64 || PRI_MACROS_BROKEN # undef PRIx64 # define PRIx64 (sizeof (long) == 8 ? "lx" : "llx") #endif #if !defined PRIX64 || PRI_MACROS_BROKEN # undef PRIX64 # define PRIX64 (sizeof (long) == 8 ? "lX" : "llX") #endif #if !defined PRIdLEAST8 || PRI_MACROS_BROKEN # undef PRIdLEAST8 # define PRIdLEAST8 "d" #endif #if !defined PRIiLEAST8 || PRI_MACROS_BROKEN # undef PRIiLEAST8 # define PRIiLEAST8 "i" #endif #if !defined PRIoLEAST8 || PRI_MACROS_BROKEN # undef PRIoLEAST8 # define PRIoLEAST8 "o" #endif #if !defined PRIuLEAST8 || PRI_MACROS_BROKEN # undef PRIuLEAST8 # define PRIuLEAST8 "u" #endif #if !defined PRIxLEAST8 || PRI_MACROS_BROKEN # undef PRIxLEAST8 # define PRIxLEAST8 "x" #endif #if !defined PRIXLEAST8 || PRI_MACROS_BROKEN # undef PRIXLEAST8 # define PRIXLEAST8 "X" #endif #if !defined PRIdLEAST16 || PRI_MACROS_BROKEN # undef PRIdLEAST16 # define PRIdLEAST16 "d" #endif #if !defined PRIiLEAST16 || PRI_MACROS_BROKEN # undef PRIiLEAST16 # define PRIiLEAST16 "i" #endif #if !defined PRIoLEAST16 || PRI_MACROS_BROKEN # undef PRIoLEAST16 # define PRIoLEAST16 "o" #endif #if !defined PRIuLEAST16 || PRI_MACROS_BROKEN # undef PRIuLEAST16 # define PRIuLEAST16 "u" #endif #if !defined PRIxLEAST16 || PRI_MACROS_BROKEN # undef PRIxLEAST16 # define PRIxLEAST16 "x" #endif #if !defined PRIXLEAST16 || PRI_MACROS_BROKEN # undef PRIXLEAST16 # define PRIXLEAST16 "X" #endif #if !defined PRIdLEAST32 || PRI_MACROS_BROKEN # undef PRIdLEAST32 # define PRIdLEAST32 "d" #endif #if !defined PRIiLEAST32 || PRI_MACROS_BROKEN # undef PRIiLEAST32 # define PRIiLEAST32 "i" #endif #if !defined PRIoLEAST32 || PRI_MACROS_BROKEN # undef PRIoLEAST32 # define PRIoLEAST32 "o" #endif #if !defined PRIuLEAST32 || PRI_MACROS_BROKEN # undef PRIuLEAST32 # define PRIuLEAST32 "u" #endif #if !defined PRIxLEAST32 || PRI_MACROS_BROKEN # undef PRIxLEAST32 # define PRIxLEAST32 "x" #endif #if !defined PRIXLEAST32 || PRI_MACROS_BROKEN # undef PRIXLEAST32 # define PRIXLEAST32 "X" #endif #if !defined PRIdLEAST64 || PRI_MACROS_BROKEN # undef PRIdLEAST64 # define PRIdLEAST64 PRId64 #endif #if !defined PRIiLEAST64 || PRI_MACROS_BROKEN # undef PRIiLEAST64 # define PRIiLEAST64 PRIi64 #endif #if !defined PRIoLEAST64 || PRI_MACROS_BROKEN # undef PRIoLEAST64 # define PRIoLEAST64 PRIo64 #endif #if !defined PRIuLEAST64 || PRI_MACROS_BROKEN # undef PRIuLEAST64 # define PRIuLEAST64 PRIu64 #endif #if !defined PRIxLEAST64 || PRI_MACROS_BROKEN # undef PRIxLEAST64 # define PRIxLEAST64 PRIx64 #endif #if !defined PRIXLEAST64 || PRI_MACROS_BROKEN # undef PRIXLEAST64 # define PRIXLEAST64 PRIX64 #endif #if !defined PRIdFAST8 || PRI_MACROS_BROKEN # undef PRIdFAST8 # define PRIdFAST8 "d" #endif #if !defined PRIiFAST8 || PRI_MACROS_BROKEN # undef PRIiFAST8 # define PRIiFAST8 "i" #endif #if !defined PRIoFAST8 || PRI_MACROS_BROKEN # undef PRIoFAST8 # define PRIoFAST8 "o" #endif #if !defined PRIuFAST8 || PRI_MACROS_BROKEN # undef PRIuFAST8 # define PRIuFAST8 "u" #endif #if !defined PRIxFAST8 || PRI_MACROS_BROKEN # undef PRIxFAST8 # define PRIxFAST8 "x" #endif #if !defined PRIXFAST8 || PRI_MACROS_BROKEN # undef PRIXFAST8 # define PRIXFAST8 "X" #endif #if !defined PRIdFAST16 || PRI_MACROS_BROKEN # undef PRIdFAST16 # define PRIdFAST16 "d" #endif #if !defined PRIiFAST16 || PRI_MACROS_BROKEN # undef PRIiFAST16 # define PRIiFAST16 "i" #endif #if !defined PRIoFAST16 || PRI_MACROS_BROKEN # undef PRIoFAST16 # define PRIoFAST16 "o" #endif #if !defined PRIuFAST16 || PRI_MACROS_BROKEN # undef PRIuFAST16 # define PRIuFAST16 "u" #endif #if !defined PRIxFAST16 || PRI_MACROS_BROKEN # undef PRIxFAST16 # define PRIxFAST16 "x" #endif #if !defined PRIXFAST16 || PRI_MACROS_BROKEN # undef PRIXFAST16 # define PRIXFAST16 "X" #endif #if !defined PRIdFAST32 || PRI_MACROS_BROKEN # undef PRIdFAST32 # define PRIdFAST32 "d" #endif #if !defined PRIiFAST32 || PRI_MACROS_BROKEN # undef PRIiFAST32 # define PRIiFAST32 "i" #endif #if !defined PRIoFAST32 || PRI_MACROS_BROKEN # undef PRIoFAST32 # define PRIoFAST32 "o" #endif #if !defined PRIuFAST32 || PRI_MACROS_BROKEN # undef PRIuFAST32 # define PRIuFAST32 "u" #endif #if !defined PRIxFAST32 || PRI_MACROS_BROKEN # undef PRIxFAST32 # define PRIxFAST32 "x" #endif #if !defined PRIXFAST32 || PRI_MACROS_BROKEN # undef PRIXFAST32 # define PRIXFAST32 "X" #endif #if !defined PRIdFAST64 || PRI_MACROS_BROKEN # undef PRIdFAST64 # define PRIdFAST64 PRId64 #endif #if !defined PRIiFAST64 || PRI_MACROS_BROKEN # undef PRIiFAST64 # define PRIiFAST64 PRIi64 #endif #if !defined PRIoFAST64 || PRI_MACROS_BROKEN # undef PRIoFAST64 # define PRIoFAST64 PRIo64 #endif #if !defined PRIuFAST64 || PRI_MACROS_BROKEN # undef PRIuFAST64 # define PRIuFAST64 PRIu64 #endif #if !defined PRIxFAST64 || PRI_MACROS_BROKEN # undef PRIxFAST64 # define PRIxFAST64 PRIx64 #endif #if !defined PRIXFAST64 || PRI_MACROS_BROKEN # undef PRIXFAST64 # define PRIXFAST64 PRIX64 #endif #if !defined PRIdMAX || PRI_MACROS_BROKEN # undef PRIdMAX # define PRIdMAX (sizeof (uintmax_t) == sizeof (long) ? "ld" : "lld") #endif #if !defined PRIiMAX || PRI_MACROS_BROKEN # undef PRIiMAX # define PRIiMAX (sizeof (uintmax_t) == sizeof (long) ? "li" : "lli") #endif #if !defined PRIoMAX || PRI_MACROS_BROKEN # undef PRIoMAX # define PRIoMAX (sizeof (uintmax_t) == sizeof (long) ? "lo" : "llo") #endif #if !defined PRIuMAX || PRI_MACROS_BROKEN # undef PRIuMAX # define PRIuMAX (sizeof (uintmax_t) == sizeof (long) ? "lu" : "llu") #endif #if !defined PRIxMAX || PRI_MACROS_BROKEN # undef PRIxMAX # define PRIxMAX (sizeof (uintmax_t) == sizeof (long) ? "lx" : "llx") #endif #if !defined PRIXMAX || PRI_MACROS_BROKEN # undef PRIXMAX # define PRIXMAX (sizeof (uintmax_t) == sizeof (long) ? "lX" : "llX") #endif #if !defined PRIdPTR || PRI_MACROS_BROKEN # undef PRIdPTR # define PRIdPTR \ (sizeof (void *) == sizeof (long) ? "ld" : \ sizeof (void *) == sizeof (int) ? "d" : \ "lld") #endif #if !defined PRIiPTR || PRI_MACROS_BROKEN # undef PRIiPTR # define PRIiPTR \ (sizeof (void *) == sizeof (long) ? "li" : \ sizeof (void *) == sizeof (int) ? "i" : \ "lli") #endif #if !defined PRIoPTR || PRI_MACROS_BROKEN # undef PRIoPTR # define PRIoPTR \ (sizeof (void *) == sizeof (long) ? "lo" : \ sizeof (void *) == sizeof (int) ? "o" : \ "llo") #endif #if !defined PRIuPTR || PRI_MACROS_BROKEN # undef PRIuPTR # define PRIuPTR \ (sizeof (void *) == sizeof (long) ? "lu" : \ sizeof (void *) == sizeof (int) ? "u" : \ "llu") #endif #if !defined PRIxPTR || PRI_MACROS_BROKEN # undef PRIxPTR # define PRIxPTR \ (sizeof (void *) == sizeof (long) ? "lx" : \ sizeof (void *) == sizeof (int) ? "x" : \ "llx") #endif #if !defined PRIXPTR || PRI_MACROS_BROKEN # undef PRIXPTR # define PRIXPTR \ (sizeof (void *) == sizeof (long) ? "lX" : \ sizeof (void *) == sizeof (int) ? "X" : \ "llX") #endif /* @@ end of prolog @@ */ #ifdef _LIBC /* Rename the non ISO C functions. This is required by the standard because some ISO C functions will require linking with this object file and the name space must not be polluted. */ # define open __open # define close __close # define read __read # define mmap __mmap # define munmap __munmap #endif /* For those losing systems which don't have `alloca' we have to add some additional code emulating it. */ #ifdef HAVE_ALLOCA # define freea(p) /* nothing */ #else # define alloca(n) malloc (n) # define freea(p) free (p) #endif /* For systems that distinguish between text and binary I/O. O_BINARY is usually declared in . */ #if !defined O_BINARY && defined _O_BINARY /* For MSC-compatible compilers. */ # define O_BINARY _O_BINARY # define O_TEXT _O_TEXT #endif #ifdef __BEOS__ /* BeOS 5 has O_BINARY and O_TEXT, but they have no effect. */ # undef O_BINARY # undef O_TEXT #endif /* On reasonable systems, binary I/O is the default. */ #ifndef O_BINARY # define O_BINARY 0 #endif /* Prototypes for local functions. Needed to ensure compiler checking of function argument counts despite of K&R C function definition syntax. */ static const char *get_sysdep_segment_value PARAMS ((const char *name)); /* We need a sign, whether a new catalog was loaded, which can be associated with all translations. This is important if the translations are cached by one of GCC's features. */ int _nl_msg_cat_cntr; /* Expand a system dependent string segment. Return NULL if unsupported. */ static const char * get_sysdep_segment_value (name) const char *name; { /* Test for an ISO C 99 section 7.8.1 format string directive. Syntax: P R I { d | i | o | u | x | X } { { | LEAST | FAST } { 8 | 16 | 32 | 64 } | MAX | PTR } */ /* We don't use a table of 14 times 6 'const char *' strings here, because data relocations cost startup time. */ if (name[0] == 'P' && name[1] == 'R' && name[2] == 'I') { if (name[3] == 'd' || name[3] == 'i' || name[3] == 'o' || name[3] == 'u' || name[3] == 'x' || name[3] == 'X') { if (name[4] == '8' && name[5] == '\0') { if (name[3] == 'd') return PRId8; if (name[3] == 'i') return PRIi8; if (name[3] == 'o') return PRIo8; if (name[3] == 'u') return PRIu8; if (name[3] == 'x') return PRIx8; if (name[3] == 'X') return PRIX8; abort (); } if (name[4] == '1' && name[5] == '6' && name[6] == '\0') { if (name[3] == 'd') return PRId16; if (name[3] == 'i') return PRIi16; if (name[3] == 'o') return PRIo16; if (name[3] == 'u') return PRIu16; if (name[3] == 'x') return PRIx16; if (name[3] == 'X') return PRIX16; abort (); } if (name[4] == '3' && name[5] == '2' && name[6] == '\0') { if (name[3] == 'd') return PRId32; if (name[3] == 'i') return PRIi32; if (name[3] == 'o') return PRIo32; if (name[3] == 'u') return PRIu32; if (name[3] == 'x') return PRIx32; if (name[3] == 'X') return PRIX32; abort (); } if (name[4] == '6' && name[5] == '4' && name[6] == '\0') { if (name[3] == 'd') return PRId64; if (name[3] == 'i') return PRIi64; if (name[3] == 'o') return PRIo64; if (name[3] == 'u') return PRIu64; if (name[3] == 'x') return PRIx64; if (name[3] == 'X') return PRIX64; abort (); } if (name[4] == 'L' && name[5] == 'E' && name[6] == 'A' && name[7] == 'S' && name[8] == 'T') { if (name[9] == '8' && name[10] == '\0') { if (name[3] == 'd') return PRIdLEAST8; if (name[3] == 'i') return PRIiLEAST8; if (name[3] == 'o') return PRIoLEAST8; if (name[3] == 'u') return PRIuLEAST8; if (name[3] == 'x') return PRIxLEAST8; if (name[3] == 'X') return PRIXLEAST8; abort (); } if (name[9] == '1' && name[10] == '6' && name[11] == '\0') { if (name[3] == 'd') return PRIdLEAST16; if (name[3] == 'i') return PRIiLEAST16; if (name[3] == 'o') return PRIoLEAST16; if (name[3] == 'u') return PRIuLEAST16; if (name[3] == 'x') return PRIxLEAST16; if (name[3] == 'X') return PRIXLEAST16; abort (); } if (name[9] == '3' && name[10] == '2' && name[11] == '\0') { if (name[3] == 'd') return PRIdLEAST32; if (name[3] == 'i') return PRIiLEAST32; if (name[3] == 'o') return PRIoLEAST32; if (name[3] == 'u') return PRIuLEAST32; if (name[3] == 'x') return PRIxLEAST32; if (name[3] == 'X') return PRIXLEAST32; abort (); } if (name[9] == '6' && name[10] == '4' && name[11] == '\0') { if (name[3] == 'd') return PRIdLEAST64; if (name[3] == 'i') return PRIiLEAST64; if (name[3] == 'o') return PRIoLEAST64; if (name[3] == 'u') return PRIuLEAST64; if (name[3] == 'x') return PRIxLEAST64; if (name[3] == 'X') return PRIXLEAST64; abort (); } } if (name[4] == 'F' && name[5] == 'A' && name[6] == 'S' && name[7] == 'T') { if (name[8] == '8' && name[9] == '\0') { if (name[3] == 'd') return PRIdFAST8; if (name[3] == 'i') return PRIiFAST8; if (name[3] == 'o') return PRIoFAST8; if (name[3] == 'u') return PRIuFAST8; if (name[3] == 'x') return PRIxFAST8; if (name[3] == 'X') return PRIXFAST8; abort (); } if (name[8] == '1' && name[9] == '6' && name[10] == '\0') { if (name[3] == 'd') return PRIdFAST16; if (name[3] == 'i') return PRIiFAST16; if (name[3] == 'o') return PRIoFAST16; if (name[3] == 'u') return PRIuFAST16; if (name[3] == 'x') return PRIxFAST16; if (name[3] == 'X') return PRIXFAST16; abort (); } if (name[8] == '3' && name[9] == '2' && name[10] == '\0') { if (name[3] == 'd') return PRIdFAST32; if (name[3] == 'i') return PRIiFAST32; if (name[3] == 'o') return PRIoFAST32; if (name[3] == 'u') return PRIuFAST32; if (name[3] == 'x') return PRIxFAST32; if (name[3] == 'X') return PRIXFAST32; abort (); } if (name[8] == '6' && name[9] == '4' && name[10] == '\0') { if (name[3] == 'd') return PRIdFAST64; if (name[3] == 'i') return PRIiFAST64; if (name[3] == 'o') return PRIoFAST64; if (name[3] == 'u') return PRIuFAST64; if (name[3] == 'x') return PRIxFAST64; if (name[3] == 'X') return PRIXFAST64; abort (); } } if (name[4] == 'M' && name[5] == 'A' && name[6] == 'X' && name[7] == '\0') { if (name[3] == 'd') return PRIdMAX; if (name[3] == 'i') return PRIiMAX; if (name[3] == 'o') return PRIoMAX; if (name[3] == 'u') return PRIuMAX; if (name[3] == 'x') return PRIxMAX; if (name[3] == 'X') return PRIXMAX; abort (); } if (name[4] == 'P' && name[5] == 'T' && name[6] == 'R' && name[7] == '\0') { if (name[3] == 'd') return PRIdPTR; if (name[3] == 'i') return PRIiPTR; if (name[3] == 'o') return PRIoPTR; if (name[3] == 'u') return PRIuPTR; if (name[3] == 'x') return PRIxPTR; if (name[3] == 'X') return PRIXPTR; abort (); } } } /* Other system dependent strings are not valid. */ return NULL; } /* Initialize the codeset dependent parts of an opened message catalog. Return the header entry. */ const char * internal_function _nl_init_domain_conv (domain_file, domain, domainbinding) struct loaded_l10nfile *domain_file; struct loaded_domain *domain; struct binding *domainbinding; { /* Find out about the character set the file is encoded with. This can be found (in textual form) in the entry "". If this entry does not exist or if this does not contain the `charset=' information, we will assume the charset matches the one the current locale and we don't have to perform any conversion. */ char *nullentry; size_t nullentrylen; /* Preinitialize fields, to avoid recursion during _nl_find_msg. */ domain->codeset_cntr = (domainbinding != NULL ? domainbinding->codeset_cntr : 0); #ifdef _LIBC domain->conv = (__gconv_t) -1; #else # if HAVE_ICONV domain->conv = (iconv_t) -1; # endif #endif domain->conv_tab = NULL; /* Get the header entry. */ nullentry = _nl_find_msg (domain_file, domainbinding, "", &nullentrylen); if (nullentry != NULL) { #if defined _LIBC || HAVE_ICONV const char *charsetstr; charsetstr = strstr (nullentry, "charset="); if (charsetstr != NULL) { size_t len; char *charset; const char *outcharset; charsetstr += strlen ("charset="); len = strcspn (charsetstr, " \t\n"); charset = (char *) alloca (len + 1); # if defined _LIBC || HAVE_MEMPCPY *((char *) mempcpy (charset, charsetstr, len)) = '\0'; # else memcpy (charset, charsetstr, len); charset[len] = '\0'; # endif /* The output charset should normally be determined by the locale. But sometimes the locale is not used or not correctly set up, so we provide a possibility for the user to override this. Moreover, the value specified through bind_textdomain_codeset overrides both. */ if (domainbinding != NULL && domainbinding->codeset != NULL) outcharset = domainbinding->codeset; else { outcharset = getenv ("OUTPUT_CHARSET"); if (outcharset == NULL || outcharset[0] == '\0') { # ifdef _LIBC outcharset = _NL_CURRENT (LC_CTYPE, CODESET); # else # if HAVE_ICONV extern const char *locale_charset PARAMS ((void)); outcharset = locale_charset (); # endif # endif } } # ifdef _LIBC /* We always want to use transliteration. */ outcharset = norm_add_slashes (outcharset, "TRANSLIT"); charset = norm_add_slashes (charset, NULL); if (__gconv_open (outcharset, charset, &domain->conv, GCONV_AVOID_NOCONV) != __GCONV_OK) domain->conv = (__gconv_t) -1; # else # if HAVE_ICONV /* When using GNU libc >= 2.2 or GNU libiconv >= 1.5, we want to use transliteration. */ # if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 2) || __GLIBC__ > 2 \ || _LIBICONV_VERSION >= 0x0105 if (strchr (outcharset, '/') == NULL) { char *tmp; len = strlen (outcharset); tmp = (char *) alloca (len + 10 + 1); memcpy (tmp, outcharset, len); memcpy (tmp + len, "//TRANSLIT", 10 + 1); outcharset = tmp; domain->conv = iconv_open (outcharset, charset); freea (outcharset); } else # endif domain->conv = iconv_open (outcharset, charset); # endif # endif freea (charset); } #endif /* _LIBC || HAVE_ICONV */ } return nullentry; } /* Frees the codeset dependent parts of an opened message catalog. */ void internal_function _nl_free_domain_conv (domain) struct loaded_domain *domain; { if (domain->conv_tab != NULL && domain->conv_tab != (char **) -1) free (domain->conv_tab); #ifdef _LIBC if (domain->conv != (__gconv_t) -1) __gconv_close (domain->conv); #else # if HAVE_ICONV if (domain->conv != (iconv_t) -1) iconv_close (domain->conv); # endif #endif } /* Load the message catalogs specified by FILENAME. If it is no valid message catalog do nothing. */ void internal_function _nl_load_domain (domain_file, domainbinding) struct loaded_l10nfile *domain_file; struct binding *domainbinding; { int fd; size_t size; #ifdef _LIBC struct stat64 st; #else struct stat st; #endif struct mo_file_header *data = (struct mo_file_header *) -1; int use_mmap = 0; struct loaded_domain *domain; int revision; const char *nullentry; domain_file->decided = 1; domain_file->data = NULL; /* Note that it would be useless to store domainbinding in domain_file because domainbinding might be == NULL now but != NULL later (after a call to bind_textdomain_codeset). */ /* If the record does not represent a valid locale the FILENAME might be NULL. This can happen when according to the given specification the locale file name is different for XPG and CEN syntax. */ if (domain_file->filename == NULL) return; /* Try to open the addressed file. */ fd = open (domain_file->filename, O_RDONLY | O_BINARY); if (fd == -1) return; /* We must know about the size of the file. */ if ( #ifdef _LIBC __builtin_expect (fstat64 (fd, &st) != 0, 0) #else __builtin_expect (fstat (fd, &st) != 0, 0) #endif || __builtin_expect ((size = (size_t) st.st_size) != st.st_size, 0) || __builtin_expect (size < sizeof (struct mo_file_header), 0)) { /* Something went wrong. */ close (fd); return; } #ifdef HAVE_MMAP /* Now we are ready to load the file. If mmap() is available we try this first. If not available or it failed we try to load it. */ data = (struct mo_file_header *) mmap (NULL, size, PROT_READ, MAP_PRIVATE, fd, 0); if (__builtin_expect (data != (struct mo_file_header *) -1, 1)) { /* mmap() call was successful. */ close (fd); use_mmap = 1; } #endif /* If the data is not yet available (i.e. mmap'ed) we try to load it manually. */ if (data == (struct mo_file_header *) -1) { size_t to_read; char *read_ptr; data = (struct mo_file_header *) malloc (size); if (data == NULL) return; to_read = size; read_ptr = (char *) data; do { long int nb = (long int) read (fd, read_ptr, to_read); if (nb <= 0) { #ifdef EINTR if (nb == -1 && errno == EINTR) continue; #endif close (fd); return; } read_ptr += nb; to_read -= nb; } while (to_read > 0); close (fd); } /* Using the magic number we can test whether it really is a message catalog file. */ if (__builtin_expect (data->magic != _MAGIC && data->magic != _MAGIC_SWAPPED, 0)) { /* The magic number is wrong: not a message catalog file. */ #ifdef HAVE_MMAP if (use_mmap) munmap ((caddr_t) data, size); else #endif free (data); return; } domain = (struct loaded_domain *) malloc (sizeof (struct loaded_domain)); if (domain == NULL) return; domain_file->data = domain; domain->data = (char *) data; domain->use_mmap = use_mmap; domain->mmap_size = size; domain->must_swap = data->magic != _MAGIC; domain->malloced = NULL; /* Fill in the information about the available tables. */ revision = W (domain->must_swap, data->revision); /* We support only the major revision 0. */ switch (revision >> 16) { case 0: domain->nstrings = W (domain->must_swap, data->nstrings); domain->orig_tab = (const struct string_desc *) ((char *) data + W (domain->must_swap, data->orig_tab_offset)); domain->trans_tab = (const struct string_desc *) ((char *) data + W (domain->must_swap, data->trans_tab_offset)); domain->hash_size = W (domain->must_swap, data->hash_tab_size); domain->hash_tab = (domain->hash_size > 2 ? (const nls_uint32 *) ((char *) data + W (domain->must_swap, data->hash_tab_offset)) : NULL); domain->must_swap_hash_tab = domain->must_swap; /* Now dispatch on the minor revision. */ switch (revision & 0xffff) { case 0: domain->n_sysdep_strings = 0; domain->orig_sysdep_tab = NULL; domain->trans_sysdep_tab = NULL; break; case 1: default: { nls_uint32 n_sysdep_strings; if (domain->hash_tab == NULL) /* This is invalid. These minor revisions need a hash table. */ goto invalid; n_sysdep_strings = W (domain->must_swap, data->n_sysdep_strings); if (n_sysdep_strings > 0) { nls_uint32 n_sysdep_segments; const struct sysdep_segment *sysdep_segments; const char **sysdep_segment_values; const nls_uint32 *orig_sysdep_tab; const nls_uint32 *trans_sysdep_tab; size_t memneed; char *mem; struct sysdep_string_desc *inmem_orig_sysdep_tab; struct sysdep_string_desc *inmem_trans_sysdep_tab; nls_uint32 *inmem_hash_tab; unsigned int i; /* Get the values of the system dependent segments. */ n_sysdep_segments = W (domain->must_swap, data->n_sysdep_segments); sysdep_segments = (const struct sysdep_segment *) ((char *) data + W (domain->must_swap, data->sysdep_segments_offset)); sysdep_segment_values = alloca (n_sysdep_segments * sizeof (const char *)); for (i = 0; i < n_sysdep_segments; i++) { const char *name = (char *) data + W (domain->must_swap, sysdep_segments[i].offset); nls_uint32 namelen = W (domain->must_swap, sysdep_segments[i].length); if (!(namelen > 0 && name[namelen - 1] == '\0')) { freea (sysdep_segment_values); goto invalid; } sysdep_segment_values[i] = get_sysdep_segment_value (name); } orig_sysdep_tab = (const nls_uint32 *) ((char *) data + W (domain->must_swap, data->orig_sysdep_tab_offset)); trans_sysdep_tab = (const nls_uint32 *) ((char *) data + W (domain->must_swap, data->trans_sysdep_tab_offset)); /* Compute the amount of additional memory needed for the system dependent strings and the augmented hash table. */ memneed = 2 * n_sysdep_strings * sizeof (struct sysdep_string_desc) + domain->hash_size * sizeof (nls_uint32); for (i = 0; i < 2 * n_sysdep_strings; i++) { const struct sysdep_string *sysdep_string = (const struct sysdep_string *) ((char *) data + W (domain->must_swap, i < n_sysdep_strings ? orig_sysdep_tab[i] : trans_sysdep_tab[i - n_sysdep_strings])); size_t need = 0; const struct segment_pair *p = sysdep_string->segments; if (W (domain->must_swap, p->sysdepref) != SEGMENTS_END) for (p = sysdep_string->segments;; p++) { nls_uint32 sysdepref; need += W (domain->must_swap, p->segsize); sysdepref = W (domain->must_swap, p->sysdepref); if (sysdepref == SEGMENTS_END) break; if (sysdepref >= n_sysdep_segments) { /* Invalid. */ freea (sysdep_segment_values); goto invalid; } need += strlen (sysdep_segment_values[sysdepref]); } memneed += need; } /* Allocate additional memory. */ mem = (char *) malloc (memneed); if (mem == NULL) goto invalid; domain->malloced = mem; inmem_orig_sysdep_tab = (struct sysdep_string_desc *) mem; mem += n_sysdep_strings * sizeof (struct sysdep_string_desc); inmem_trans_sysdep_tab = (struct sysdep_string_desc *) mem; mem += n_sysdep_strings * sizeof (struct sysdep_string_desc); inmem_hash_tab = (nls_uint32 *) mem; mem += domain->hash_size * sizeof (nls_uint32); /* Compute the system dependent strings. */ for (i = 0; i < 2 * n_sysdep_strings; i++) { const struct sysdep_string *sysdep_string = (const struct sysdep_string *) ((char *) data + W (domain->must_swap, i < n_sysdep_strings ? orig_sysdep_tab[i] : trans_sysdep_tab[i - n_sysdep_strings])); const char *static_segments = (char *) data + W (domain->must_swap, sysdep_string->offset); const struct segment_pair *p = sysdep_string->segments; /* Concatenate the segments, and fill inmem_orig_sysdep_tab[i] (for i < n_sysdep_strings) and inmem_trans_sysdep_tab[i-n_sysdep_strings] (for i >= n_sysdep_strings). */ if (W (domain->must_swap, p->sysdepref) == SEGMENTS_END) { /* Only one static segment. */ inmem_orig_sysdep_tab[i].length = W (domain->must_swap, p->segsize); inmem_orig_sysdep_tab[i].pointer = static_segments; } else { inmem_orig_sysdep_tab[i].pointer = mem; for (p = sysdep_string->segments;; p++) { nls_uint32 segsize = W (domain->must_swap, p->segsize); nls_uint32 sysdepref = W (domain->must_swap, p->sysdepref); size_t n; if (segsize > 0) { memcpy (mem, static_segments, segsize); mem += segsize; static_segments += segsize; } if (sysdepref == SEGMENTS_END) break; n = strlen (sysdep_segment_values[sysdepref]); memcpy (mem, sysdep_segment_values[sysdepref], n); mem += n; } inmem_orig_sysdep_tab[i].length = mem - inmem_orig_sysdep_tab[i].pointer; } } /* Compute the augmented hash table. */ for (i = 0; i < domain->hash_size; i++) inmem_hash_tab[i] = W (domain->must_swap_hash_tab, domain->hash_tab[i]); for (i = 0; i < n_sysdep_strings; i++) { const char *msgid = inmem_orig_sysdep_tab[i].pointer; nls_uint32 hash_val = hash_string (msgid); nls_uint32 idx = hash_val % domain->hash_size; nls_uint32 incr = 1 + (hash_val % (domain->hash_size - 2)); for (;;) { if (inmem_hash_tab[idx] == 0) { /* Hash table entry is empty. Use it. */ inmem_hash_tab[idx] = 1 + domain->nstrings + i; break; } if (idx >= domain->hash_size - incr) idx -= domain->hash_size - incr; else idx += incr; } } freea (sysdep_segment_values); domain->n_sysdep_strings = n_sysdep_strings; domain->orig_sysdep_tab = inmem_orig_sysdep_tab; domain->trans_sysdep_tab = inmem_trans_sysdep_tab; domain->hash_tab = inmem_hash_tab; domain->must_swap_hash_tab = 0; } else { domain->n_sysdep_strings = 0; domain->orig_sysdep_tab = NULL; domain->trans_sysdep_tab = NULL; } } break; } break; default: /* This is an invalid revision. */ invalid: /* This is an invalid .mo file. */ if (domain->malloced) free (domain->malloced); #ifdef HAVE_MMAP if (use_mmap) munmap ((caddr_t) data, size); else #endif free (data); free (domain); domain_file->data = NULL; return; } /* Now initialize the character set converter from the character set the file is encoded with (found in the header entry) to the domain's specified character set or the locale's character set. */ nullentry = _nl_init_domain_conv (domain_file, domain, domainbinding); /* Also look for a plural specification. */ EXTRACT_PLURAL_EXPRESSION (nullentry, &domain->plural, &domain->nplurals); } #ifdef _LIBC void internal_function _nl_unload_domain (domain) struct loaded_domain *domain; { if (domain->plural != &__gettext_germanic_plural) __gettext_free_exp (domain->plural); _nl_free_domain_conv (domain); if (domain->malloced) free (domain->malloced); # ifdef _POSIX_MAPPED_FILES if (domain->use_mmap) munmap ((caddr_t) domain->data, domain->mmap_size); else # endif /* _POSIX_MAPPED_FILES */ free ((void *) domain->data); free (domain); } #endif kasumi-2.5/intl/os2compat.c0000644000175000017500000000550310142036016012607 00000000000000/* OS/2 compatibility functions. Copyright (C) 2001-2002 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #define OS2_AWARE #ifdef HAVE_CONFIG_H #include #endif #include #include #include /* A version of getenv() that works from DLLs */ extern unsigned long DosScanEnv (const unsigned char *pszName, unsigned char **ppszValue); char * _nl_getenv (const char *name) { unsigned char *value; if (DosScanEnv (name, &value)) return NULL; else return value; } /* A fixed size buffer. */ char libintl_nl_default_dirname[MAXPATHLEN+1]; char *_nlos2_libdir = NULL; char *_nlos2_localealiaspath = NULL; char *_nlos2_localedir = NULL; static __attribute__((constructor)) void nlos2_initialize () { char *root = getenv ("UNIXROOT"); char *gnulocaledir = getenv ("GNULOCALEDIR"); _nlos2_libdir = gnulocaledir; if (!_nlos2_libdir) { if (root) { size_t sl = strlen (root); _nlos2_libdir = (char *) malloc (sl + strlen (LIBDIR) + 1); memcpy (_nlos2_libdir, root, sl); memcpy (_nlos2_libdir + sl, LIBDIR, strlen (LIBDIR) + 1); } else _nlos2_libdir = LIBDIR; } _nlos2_localealiaspath = gnulocaledir; if (!_nlos2_localealiaspath) { if (root) { size_t sl = strlen (root); _nlos2_localealiaspath = (char *) malloc (sl + strlen (LOCALE_ALIAS_PATH) + 1); memcpy (_nlos2_localealiaspath, root, sl); memcpy (_nlos2_localealiaspath + sl, LOCALE_ALIAS_PATH, strlen (LOCALE_ALIAS_PATH) + 1); } else _nlos2_localealiaspath = LOCALE_ALIAS_PATH; } _nlos2_localedir = gnulocaledir; if (!_nlos2_localedir) { if (root) { size_t sl = strlen (root); _nlos2_localedir = (char *) malloc (sl + strlen (LOCALEDIR) + 1); memcpy (_nlos2_localedir, root, sl); memcpy (_nlos2_localedir + sl, LOCALEDIR, strlen (LOCALEDIR) + 1); } else _nlos2_localedir = LOCALEDIR; } if (strlen (_nlos2_localedir) <= MAXPATHLEN) strcpy (libintl_nl_default_dirname, _nlos2_localedir); } kasumi-2.5/intl/plural.y0000644000175000017500000001773410142036016012236 00000000000000%{ /* Expression parsing for plural form selection. Copyright (C) 2000, 2001 Free Software Foundation, Inc. Written by Ulrich Drepper , 2000. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* The bison generated parser uses alloca. AIX 3 forces us to put this declaration at the beginning of the file. The declaration in bison's skeleton file comes too late. This must come before because may include arbitrary system headers. */ #if defined _AIX && !defined __GNUC__ #pragma alloca #endif #ifdef HAVE_CONFIG_H # include #endif #include #include #include "plural-exp.h" /* The main function generated by the parser is called __gettextparse, but we want it to be called PLURAL_PARSE. */ #ifndef _LIBC # define __gettextparse PLURAL_PARSE #endif #define YYLEX_PARAM &((struct parse_args *) arg)->cp #define YYPARSE_PARAM arg %} %pure_parser %expect 7 %union { unsigned long int num; enum operator op; struct expression *exp; } %{ /* Prototypes for local functions. */ static struct expression *new_exp PARAMS ((int nargs, enum operator op, struct expression * const *args)); static inline struct expression *new_exp_0 PARAMS ((enum operator op)); static inline struct expression *new_exp_1 PARAMS ((enum operator op, struct expression *right)); static struct expression *new_exp_2 PARAMS ((enum operator op, struct expression *left, struct expression *right)); static inline struct expression *new_exp_3 PARAMS ((enum operator op, struct expression *bexp, struct expression *tbranch, struct expression *fbranch)); static int yylex PARAMS ((YYSTYPE *lval, const char **pexp)); static void yyerror PARAMS ((const char *str)); /* Allocation of expressions. */ static struct expression * new_exp (nargs, op, args) int nargs; enum operator op; struct expression * const *args; { int i; struct expression *newp; /* If any of the argument could not be malloc'ed, just return NULL. */ for (i = nargs - 1; i >= 0; i--) if (args[i] == NULL) goto fail; /* Allocate a new expression. */ newp = (struct expression *) malloc (sizeof (*newp)); if (newp != NULL) { newp->nargs = nargs; newp->operation = op; for (i = nargs - 1; i >= 0; i--) newp->val.args[i] = args[i]; return newp; } fail: for (i = nargs - 1; i >= 0; i--) FREE_EXPRESSION (args[i]); return NULL; } static inline struct expression * new_exp_0 (op) enum operator op; { return new_exp (0, op, NULL); } static inline struct expression * new_exp_1 (op, right) enum operator op; struct expression *right; { struct expression *args[1]; args[0] = right; return new_exp (1, op, args); } static struct expression * new_exp_2 (op, left, right) enum operator op; struct expression *left; struct expression *right; { struct expression *args[2]; args[0] = left; args[1] = right; return new_exp (2, op, args); } static inline struct expression * new_exp_3 (op, bexp, tbranch, fbranch) enum operator op; struct expression *bexp; struct expression *tbranch; struct expression *fbranch; { struct expression *args[3]; args[0] = bexp; args[1] = tbranch; args[2] = fbranch; return new_exp (3, op, args); } %} /* This declares that all operators have the same associativity and the precedence order as in C. See [Harbison, Steele: C, A Reference Manual]. There is no unary minus and no bitwise operators. Operators with the same syntactic behaviour have been merged into a single token, to save space in the array generated by bison. */ %right '?' /* ? */ %left '|' /* || */ %left '&' /* && */ %left EQUOP2 /* == != */ %left CMPOP2 /* < > <= >= */ %left ADDOP2 /* + - */ %left MULOP2 /* * / % */ %right '!' /* ! */ %token EQUOP2 CMPOP2 ADDOP2 MULOP2 %token NUMBER %type exp %% start: exp { if ($1 == NULL) YYABORT; ((struct parse_args *) arg)->res = $1; } ; exp: exp '?' exp ':' exp { $$ = new_exp_3 (qmop, $1, $3, $5); } | exp '|' exp { $$ = new_exp_2 (lor, $1, $3); } | exp '&' exp { $$ = new_exp_2 (land, $1, $3); } | exp EQUOP2 exp { $$ = new_exp_2 ($2, $1, $3); } | exp CMPOP2 exp { $$ = new_exp_2 ($2, $1, $3); } | exp ADDOP2 exp { $$ = new_exp_2 ($2, $1, $3); } | exp MULOP2 exp { $$ = new_exp_2 ($2, $1, $3); } | '!' exp { $$ = new_exp_1 (lnot, $2); } | 'n' { $$ = new_exp_0 (var); } | NUMBER { if (($$ = new_exp_0 (num)) != NULL) $$->val.num = $1; } | '(' exp ')' { $$ = $2; } ; %% void internal_function FREE_EXPRESSION (exp) struct expression *exp; { if (exp == NULL) return; /* Handle the recursive case. */ switch (exp->nargs) { case 3: FREE_EXPRESSION (exp->val.args[2]); /* FALLTHROUGH */ case 2: FREE_EXPRESSION (exp->val.args[1]); /* FALLTHROUGH */ case 1: FREE_EXPRESSION (exp->val.args[0]); /* FALLTHROUGH */ default: break; } free (exp); } static int yylex (lval, pexp) YYSTYPE *lval; const char **pexp; { const char *exp = *pexp; int result; while (1) { if (exp[0] == '\0') { *pexp = exp; return YYEOF; } if (exp[0] != ' ' && exp[0] != '\t') break; ++exp; } result = *exp++; switch (result) { case '0': case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': { unsigned long int n = result - '0'; while (exp[0] >= '0' && exp[0] <= '9') { n *= 10; n += exp[0] - '0'; ++exp; } lval->num = n; result = NUMBER; } break; case '=': if (exp[0] == '=') { ++exp; lval->op = equal; result = EQUOP2; } else result = YYERRCODE; break; case '!': if (exp[0] == '=') { ++exp; lval->op = not_equal; result = EQUOP2; } break; case '&': case '|': if (exp[0] == result) ++exp; else result = YYERRCODE; break; case '<': if (exp[0] == '=') { ++exp; lval->op = less_or_equal; } else lval->op = less_than; result = CMPOP2; break; case '>': if (exp[0] == '=') { ++exp; lval->op = greater_or_equal; } else lval->op = greater_than; result = CMPOP2; break; case '*': lval->op = mult; result = MULOP2; break; case '/': lval->op = divide; result = MULOP2; break; case '%': lval->op = module; result = MULOP2; break; case '+': lval->op = plus; result = ADDOP2; break; case '-': lval->op = minus; result = ADDOP2; break; case 'n': case '?': case ':': case '(': case ')': /* Nothing, just return the character. */ break; case ';': case '\n': case '\0': /* Be safe and let the user call this function again. */ --exp; result = YYEOF; break; default: result = YYERRCODE; #if YYDEBUG != 0 --exp; #endif break; } *pexp = exp; return result; } static void yyerror (str) const char *str; { /* Do nothing. We don't print error messages here. */ } kasumi-2.5/intl/plural.c0000644000175000017500000011231410142036016012176 00000000000000/* A Bison parser, made from plural.y by GNU bison 1.35. */ #define YYBISON 1 /* Identify Bison output. */ #define yyparse __gettextparse #define yylex __gettextlex #define yyerror __gettexterror #define yylval __gettextlval #define yychar __gettextchar #define yydebug __gettextdebug #define yynerrs __gettextnerrs # define EQUOP2 257 # define CMPOP2 258 # define ADDOP2 259 # define MULOP2 260 # define NUMBER 261 #line 1 "plural.y" /* Expression parsing for plural form selection. Copyright (C) 2000, 2001 Free Software Foundation, Inc. Written by Ulrich Drepper , 2000. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* The bison generated parser uses alloca. AIX 3 forces us to put this declaration at the beginning of the file. The declaration in bison's skeleton file comes too late. This must come before because may include arbitrary system headers. */ #if defined _AIX && !defined __GNUC__ #pragma alloca #endif #ifdef HAVE_CONFIG_H # include #endif #include #include #include "plural-exp.h" /* The main function generated by the parser is called __gettextparse, but we want it to be called PLURAL_PARSE. */ #ifndef _LIBC # define __gettextparse PLURAL_PARSE #endif #define YYLEX_PARAM &((struct parse_args *) arg)->cp #define YYPARSE_PARAM arg #line 49 "plural.y" #ifndef YYSTYPE typedef union { unsigned long int num; enum operator op; struct expression *exp; } yystype; # define YYSTYPE yystype # define YYSTYPE_IS_TRIVIAL 1 #endif #line 55 "plural.y" /* Prototypes for local functions. */ static struct expression *new_exp PARAMS ((int nargs, enum operator op, struct expression * const *args)); static inline struct expression *new_exp_0 PARAMS ((enum operator op)); static inline struct expression *new_exp_1 PARAMS ((enum operator op, struct expression *right)); static struct expression *new_exp_2 PARAMS ((enum operator op, struct expression *left, struct expression *right)); static inline struct expression *new_exp_3 PARAMS ((enum operator op, struct expression *bexp, struct expression *tbranch, struct expression *fbranch)); static int yylex PARAMS ((YYSTYPE *lval, const char **pexp)); static void yyerror PARAMS ((const char *str)); /* Allocation of expressions. */ static struct expression * new_exp (nargs, op, args) int nargs; enum operator op; struct expression * const *args; { int i; struct expression *newp; /* If any of the argument could not be malloc'ed, just return NULL. */ for (i = nargs - 1; i >= 0; i--) if (args[i] == NULL) goto fail; /* Allocate a new expression. */ newp = (struct expression *) malloc (sizeof (*newp)); if (newp != NULL) { newp->nargs = nargs; newp->operation = op; for (i = nargs - 1; i >= 0; i--) newp->val.args[i] = args[i]; return newp; } fail: for (i = nargs - 1; i >= 0; i--) FREE_EXPRESSION (args[i]); return NULL; } static inline struct expression * new_exp_0 (op) enum operator op; { return new_exp (0, op, NULL); } static inline struct expression * new_exp_1 (op, right) enum operator op; struct expression *right; { struct expression *args[1]; args[0] = right; return new_exp (1, op, args); } static struct expression * new_exp_2 (op, left, right) enum operator op; struct expression *left; struct expression *right; { struct expression *args[2]; args[0] = left; args[1] = right; return new_exp (2, op, args); } static inline struct expression * new_exp_3 (op, bexp, tbranch, fbranch) enum operator op; struct expression *bexp; struct expression *tbranch; struct expression *fbranch; { struct expression *args[3]; args[0] = bexp; args[1] = tbranch; args[2] = fbranch; return new_exp (3, op, args); } #ifndef YYDEBUG # define YYDEBUG 0 #endif #define YYFINAL 27 #define YYFLAG -32768 #define YYNTBASE 16 /* YYTRANSLATE(YYLEX) -- Bison token number corresponding to YYLEX. */ #define YYTRANSLATE(x) ((unsigned)(x) <= 261 ? yytranslate[x] : 18) /* YYTRANSLATE[YYLEX] -- Bison token number corresponding to YYLEX. */ static const char yytranslate[] = { 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 10, 2, 2, 2, 2, 5, 2, 14, 15, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 12, 2, 2, 2, 2, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 13, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 1, 6, 7, 8, 9, 11 }; #if YYDEBUG static const short yyprhs[] = { 0, 0, 2, 8, 12, 16, 20, 24, 28, 32, 35, 37, 39 }; static const short yyrhs[] = { 17, 0, 17, 3, 17, 12, 17, 0, 17, 4, 17, 0, 17, 5, 17, 0, 17, 6, 17, 0, 17, 7, 17, 0, 17, 8, 17, 0, 17, 9, 17, 0, 10, 17, 0, 13, 0, 11, 0, 14, 17, 15, 0 }; #endif #if YYDEBUG /* YYRLINE[YYN] -- source line where rule number YYN was defined. */ static const short yyrline[] = { 0, 174, 182, 186, 190, 194, 198, 202, 206, 210, 214, 218, 223 }; #endif #if (YYDEBUG) || defined YYERROR_VERBOSE /* YYTNAME[TOKEN_NUM] -- String name of the token TOKEN_NUM. */ static const char *const yytname[] = { "$", "error", "$undefined.", "'?'", "'|'", "'&'", "EQUOP2", "CMPOP2", "ADDOP2", "MULOP2", "'!'", "NUMBER", "':'", "'n'", "'('", "')'", "start", "exp", 0 }; #endif /* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ static const short yyr1[] = { 0, 16, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17, 17 }; /* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ static const short yyr2[] = { 0, 1, 5, 3, 3, 3, 3, 3, 3, 2, 1, 1, 3 }; /* YYDEFACT[S] -- default rule to reduce with in state S when YYTABLE doesn't specify something else to do. Zero means the default is an error. */ static const short yydefact[] = { 0, 0, 11, 10, 0, 1, 9, 0, 0, 0, 0, 0, 0, 0, 0, 12, 0, 3, 4, 5, 6, 7, 8, 0, 2, 0, 0, 0 }; static const short yydefgoto[] = { 25, 5 }; static const short yypact[] = { -9, -9,-32768,-32768, -9, 34,-32768, 11, -9, -9, -9, -9, -9, -9, -9,-32768, 24, 39, 43, 16, 26, -3,-32768, -9, 34, 21, 53,-32768 }; static const short yypgoto[] = { -32768, -1 }; #define YYLAST 53 static const short yytable[] = { 6, 1, 2, 7, 3, 4, 14, 16, 17, 18, 19, 20, 21, 22, 8, 9, 10, 11, 12, 13, 14, 26, 24, 12, 13, 14, 15, 8, 9, 10, 11, 12, 13, 14, 13, 14, 23, 8, 9, 10, 11, 12, 13, 14, 10, 11, 12, 13, 14, 11, 12, 13, 14, 27 }; static const short yycheck[] = { 1, 10, 11, 4, 13, 14, 9, 8, 9, 10, 11, 12, 13, 14, 3, 4, 5, 6, 7, 8, 9, 0, 23, 7, 8, 9, 15, 3, 4, 5, 6, 7, 8, 9, 8, 9, 12, 3, 4, 5, 6, 7, 8, 9, 5, 6, 7, 8, 9, 6, 7, 8, 9, 0 }; #define YYPURE 1 /* -*-C-*- Note some compilers choke on comments on `#line' lines. */ #line 3 "/usr/local/share/bison/bison.simple" /* Skeleton output parser for bison, Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* As a special exception, when this file is copied by Bison into a Bison output file, you may use that output file without restriction. This special exception was added by the Free Software Foundation in version 1.24 of Bison. */ /* This is the parser code that is written into each bison parser when the %semantic_parser declaration is not specified in the grammar. It was written by Richard Stallman by simplifying the hairy parser used when %semantic_parser is specified. */ /* All symbols defined below should begin with yy or YY, to avoid infringing on user name space. This should be done even for local variables, as they might otherwise be expanded by user macros. There are some unavoidable exceptions within include files to define necessary library symbols; they are noted "INFRINGES ON USER NAME SPACE" below. */ #if ! defined (yyoverflow) || defined (YYERROR_VERBOSE) /* The parser invokes alloca or malloc; define the necessary symbols. */ # if YYSTACK_USE_ALLOCA # define YYSTACK_ALLOC alloca # else # ifndef YYSTACK_USE_ALLOCA # if defined (alloca) || defined (_ALLOCA_H) # define YYSTACK_ALLOC alloca # else # ifdef __GNUC__ # define YYSTACK_ALLOC __builtin_alloca # endif # endif # endif # endif # ifdef YYSTACK_ALLOC /* Pacify GCC's `empty if-body' warning. */ # define YYSTACK_FREE(Ptr) do { /* empty */; } while (0) # else # if defined (__STDC__) || defined (__cplusplus) # include /* INFRINGES ON USER NAME SPACE */ # define YYSIZE_T size_t # endif # define YYSTACK_ALLOC malloc # define YYSTACK_FREE free # endif #endif /* ! defined (yyoverflow) || defined (YYERROR_VERBOSE) */ #if (! defined (yyoverflow) \ && (! defined (__cplusplus) \ || (YYLTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL))) /* A type that is properly aligned for any stack member. */ union yyalloc { short yyss; YYSTYPE yyvs; # if YYLSP_NEEDED YYLTYPE yyls; # endif }; /* The size of the maximum gap between one aligned stack and the next. */ # define YYSTACK_GAP_MAX (sizeof (union yyalloc) - 1) /* The size of an array large to enough to hold all stacks, each with N elements. */ # if YYLSP_NEEDED # define YYSTACK_BYTES(N) \ ((N) * (sizeof (short) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \ + 2 * YYSTACK_GAP_MAX) # else # define YYSTACK_BYTES(N) \ ((N) * (sizeof (short) + sizeof (YYSTYPE)) \ + YYSTACK_GAP_MAX) # endif /* Copy COUNT objects from FROM to TO. The source and destination do not overlap. */ # ifndef YYCOPY # if 1 < __GNUC__ # define YYCOPY(To, From, Count) \ __builtin_memcpy (To, From, (Count) * sizeof (*(From))) # else # define YYCOPY(To, From, Count) \ do \ { \ register YYSIZE_T yyi; \ for (yyi = 0; yyi < (Count); yyi++) \ (To)[yyi] = (From)[yyi]; \ } \ while (0) # endif # endif /* Relocate STACK from its old location to the new one. The local variables YYSIZE and YYSTACKSIZE give the old and new number of elements in the stack, and YYPTR gives the new location of the stack. Advance YYPTR to a properly aligned location for the next stack. */ # define YYSTACK_RELOCATE(Stack) \ do \ { \ YYSIZE_T yynewbytes; \ YYCOPY (&yyptr->Stack, Stack, yysize); \ Stack = &yyptr->Stack; \ yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAX; \ yyptr += yynewbytes / sizeof (*yyptr); \ } \ while (0) #endif #if ! defined (YYSIZE_T) && defined (__SIZE_TYPE__) # define YYSIZE_T __SIZE_TYPE__ #endif #if ! defined (YYSIZE_T) && defined (size_t) # define YYSIZE_T size_t #endif #if ! defined (YYSIZE_T) # if defined (__STDC__) || defined (__cplusplus) # include /* INFRINGES ON USER NAME SPACE */ # define YYSIZE_T size_t # endif #endif #if ! defined (YYSIZE_T) # define YYSIZE_T unsigned int #endif #define yyerrok (yyerrstatus = 0) #define yyclearin (yychar = YYEMPTY) #define YYEMPTY -2 #define YYEOF 0 #define YYACCEPT goto yyacceptlab #define YYABORT goto yyabortlab #define YYERROR goto yyerrlab1 /* Like YYERROR except do call yyerror. This remains here temporarily to ease the transition to the new meaning of YYERROR, for GCC. Once GCC version 2 has supplanted version 1, this can go. */ #define YYFAIL goto yyerrlab #define YYRECOVERING() (!!yyerrstatus) #define YYBACKUP(Token, Value) \ do \ if (yychar == YYEMPTY && yylen == 1) \ { \ yychar = (Token); \ yylval = (Value); \ yychar1 = YYTRANSLATE (yychar); \ YYPOPSTACK; \ goto yybackup; \ } \ else \ { \ yyerror ("syntax error: cannot back up"); \ YYERROR; \ } \ while (0) #define YYTERROR 1 #define YYERRCODE 256 /* YYLLOC_DEFAULT -- Compute the default location (before the actions are run). When YYLLOC_DEFAULT is run, CURRENT is set the location of the first token. By default, to implement support for ranges, extend its range to the last symbol. */ #ifndef YYLLOC_DEFAULT # define YYLLOC_DEFAULT(Current, Rhs, N) \ Current.last_line = Rhs[N].last_line; \ Current.last_column = Rhs[N].last_column; #endif /* YYLEX -- calling `yylex' with the right arguments. */ #if YYPURE # if YYLSP_NEEDED # ifdef YYLEX_PARAM # define YYLEX yylex (&yylval, &yylloc, YYLEX_PARAM) # else # define YYLEX yylex (&yylval, &yylloc) # endif # else /* !YYLSP_NEEDED */ # ifdef YYLEX_PARAM # define YYLEX yylex (&yylval, YYLEX_PARAM) # else # define YYLEX yylex (&yylval) # endif # endif /* !YYLSP_NEEDED */ #else /* !YYPURE */ # define YYLEX yylex () #endif /* !YYPURE */ /* Enable debugging if requested. */ #if YYDEBUG # ifndef YYFPRINTF # include /* INFRINGES ON USER NAME SPACE */ # define YYFPRINTF fprintf # endif # define YYDPRINTF(Args) \ do { \ if (yydebug) \ YYFPRINTF Args; \ } while (0) /* Nonzero means print parse trace. It is left uninitialized so that multiple parsers can coexist. */ int yydebug; #else /* !YYDEBUG */ # define YYDPRINTF(Args) #endif /* !YYDEBUG */ /* YYINITDEPTH -- initial size of the parser's stacks. */ #ifndef YYINITDEPTH # define YYINITDEPTH 200 #endif /* YYMAXDEPTH -- maximum size the stacks can grow to (effective only if the built-in stack extension method is used). Do not make this value too large; the results are undefined if SIZE_MAX < YYSTACK_BYTES (YYMAXDEPTH) evaluated with infinite-precision integer arithmetic. */ #if YYMAXDEPTH == 0 # undef YYMAXDEPTH #endif #ifndef YYMAXDEPTH # define YYMAXDEPTH 10000 #endif #ifdef YYERROR_VERBOSE # ifndef yystrlen # if defined (__GLIBC__) && defined (_STRING_H) # define yystrlen strlen # else /* Return the length of YYSTR. */ static YYSIZE_T # if defined (__STDC__) || defined (__cplusplus) yystrlen (const char *yystr) # else yystrlen (yystr) const char *yystr; # endif { register const char *yys = yystr; while (*yys++ != '\0') continue; return yys - yystr - 1; } # endif # endif # ifndef yystpcpy # if defined (__GLIBC__) && defined (_STRING_H) && defined (_GNU_SOURCE) # define yystpcpy stpcpy # else /* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in YYDEST. */ static char * # if defined (__STDC__) || defined (__cplusplus) yystpcpy (char *yydest, const char *yysrc) # else yystpcpy (yydest, yysrc) char *yydest; const char *yysrc; # endif { register char *yyd = yydest; register const char *yys = yysrc; while ((*yyd++ = *yys++) != '\0') continue; return yyd - 1; } # endif # endif #endif #line 315 "/usr/local/share/bison/bison.simple" /* The user can define YYPARSE_PARAM as the name of an argument to be passed into yyparse. The argument should have type void *. It should actually point to an object. Grammar actions can access the variable by casting it to the proper pointer type. */ #ifdef YYPARSE_PARAM # if defined (__STDC__) || defined (__cplusplus) # define YYPARSE_PARAM_ARG void *YYPARSE_PARAM # define YYPARSE_PARAM_DECL # else # define YYPARSE_PARAM_ARG YYPARSE_PARAM # define YYPARSE_PARAM_DECL void *YYPARSE_PARAM; # endif #else /* !YYPARSE_PARAM */ # define YYPARSE_PARAM_ARG # define YYPARSE_PARAM_DECL #endif /* !YYPARSE_PARAM */ /* Prevent warning if -Wstrict-prototypes. */ #ifdef __GNUC__ # ifdef YYPARSE_PARAM int yyparse (void *); # else int yyparse (void); # endif #endif /* YY_DECL_VARIABLES -- depending whether we use a pure parser, variables are global, or local to YYPARSE. */ #define YY_DECL_NON_LSP_VARIABLES \ /* The lookahead symbol. */ \ int yychar; \ \ /* The semantic value of the lookahead symbol. */ \ YYSTYPE yylval; \ \ /* Number of parse errors so far. */ \ int yynerrs; #if YYLSP_NEEDED # define YY_DECL_VARIABLES \ YY_DECL_NON_LSP_VARIABLES \ \ /* Location data for the lookahead symbol. */ \ YYLTYPE yylloc; #else # define YY_DECL_VARIABLES \ YY_DECL_NON_LSP_VARIABLES #endif /* If nonreentrant, generate the variables here. */ #if !YYPURE YY_DECL_VARIABLES #endif /* !YYPURE */ int yyparse (YYPARSE_PARAM_ARG) YYPARSE_PARAM_DECL { /* If reentrant, generate the variables here. */ #if YYPURE YY_DECL_VARIABLES #endif /* !YYPURE */ register int yystate; register int yyn; int yyresult; /* Number of tokens to shift before error messages enabled. */ int yyerrstatus; /* Lookahead token as an internal (translated) token number. */ int yychar1 = 0; /* Three stacks and their tools: `yyss': related to states, `yyvs': related to semantic values, `yyls': related to locations. Refer to the stacks thru separate pointers, to allow yyoverflow to reallocate them elsewhere. */ /* The state stack. */ short yyssa[YYINITDEPTH]; short *yyss = yyssa; register short *yyssp; /* The semantic value stack. */ YYSTYPE yyvsa[YYINITDEPTH]; YYSTYPE *yyvs = yyvsa; register YYSTYPE *yyvsp; #if YYLSP_NEEDED /* The location stack. */ YYLTYPE yylsa[YYINITDEPTH]; YYLTYPE *yyls = yylsa; YYLTYPE *yylsp; #endif #if YYLSP_NEEDED # define YYPOPSTACK (yyvsp--, yyssp--, yylsp--) #else # define YYPOPSTACK (yyvsp--, yyssp--) #endif YYSIZE_T yystacksize = YYINITDEPTH; /* The variables used to return semantic value and location from the action routines. */ YYSTYPE yyval; #if YYLSP_NEEDED YYLTYPE yyloc; #endif /* When reducing, the number of symbols on the RHS of the reduced rule. */ int yylen; YYDPRINTF ((stderr, "Starting parse\n")); yystate = 0; yyerrstatus = 0; yynerrs = 0; yychar = YYEMPTY; /* Cause a token to be read. */ /* Initialize stack pointers. Waste one element of value and location stack so that they stay on the same level as the state stack. The wasted elements are never initialized. */ yyssp = yyss; yyvsp = yyvs; #if YYLSP_NEEDED yylsp = yyls; #endif goto yysetstate; /*------------------------------------------------------------. | yynewstate -- Push a new state, which is found in yystate. | `------------------------------------------------------------*/ yynewstate: /* In all cases, when you get here, the value and location stacks have just been pushed. so pushing a state here evens the stacks. */ yyssp++; yysetstate: *yyssp = yystate; if (yyssp >= yyss + yystacksize - 1) { /* Get the current used size of the three stacks, in elements. */ YYSIZE_T yysize = yyssp - yyss + 1; #ifdef yyoverflow { /* Give user a chance to reallocate the stack. Use copies of these so that the &'s don't force the real ones into memory. */ YYSTYPE *yyvs1 = yyvs; short *yyss1 = yyss; /* Each stack pointer address is followed by the size of the data in use in that stack, in bytes. */ # if YYLSP_NEEDED YYLTYPE *yyls1 = yyls; /* This used to be a conditional around just the two extra args, but that might be undefined if yyoverflow is a macro. */ yyoverflow ("parser stack overflow", &yyss1, yysize * sizeof (*yyssp), &yyvs1, yysize * sizeof (*yyvsp), &yyls1, yysize * sizeof (*yylsp), &yystacksize); yyls = yyls1; # else yyoverflow ("parser stack overflow", &yyss1, yysize * sizeof (*yyssp), &yyvs1, yysize * sizeof (*yyvsp), &yystacksize); # endif yyss = yyss1; yyvs = yyvs1; } #else /* no yyoverflow */ # ifndef YYSTACK_RELOCATE goto yyoverflowlab; # else /* Extend the stack our own way. */ if (yystacksize >= YYMAXDEPTH) goto yyoverflowlab; yystacksize *= 2; if (yystacksize > YYMAXDEPTH) yystacksize = YYMAXDEPTH; { short *yyss1 = yyss; union yyalloc *yyptr = (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); if (! yyptr) goto yyoverflowlab; YYSTACK_RELOCATE (yyss); YYSTACK_RELOCATE (yyvs); # if YYLSP_NEEDED YYSTACK_RELOCATE (yyls); # endif # undef YYSTACK_RELOCATE if (yyss1 != yyssa) YYSTACK_FREE (yyss1); } # endif #endif /* no yyoverflow */ yyssp = yyss + yysize - 1; yyvsp = yyvs + yysize - 1; #if YYLSP_NEEDED yylsp = yyls + yysize - 1; #endif YYDPRINTF ((stderr, "Stack size increased to %lu\n", (unsigned long int) yystacksize)); if (yyssp >= yyss + yystacksize - 1) YYABORT; } YYDPRINTF ((stderr, "Entering state %d\n", yystate)); goto yybackup; /*-----------. | yybackup. | `-----------*/ yybackup: /* Do appropriate processing given the current state. */ /* Read a lookahead token if we need one and don't already have one. */ /* yyresume: */ /* First try to decide what to do without reference to lookahead token. */ yyn = yypact[yystate]; if (yyn == YYFLAG) goto yydefault; /* Not known => get a lookahead token if don't already have one. */ /* yychar is either YYEMPTY or YYEOF or a valid token in external form. */ if (yychar == YYEMPTY) { YYDPRINTF ((stderr, "Reading a token: ")); yychar = YYLEX; } /* Convert token to internal form (in yychar1) for indexing tables with */ if (yychar <= 0) /* This means end of input. */ { yychar1 = 0; yychar = YYEOF; /* Don't call YYLEX any more */ YYDPRINTF ((stderr, "Now at end of input.\n")); } else { yychar1 = YYTRANSLATE (yychar); #if YYDEBUG /* We have to keep this `#if YYDEBUG', since we use variables which are defined only if `YYDEBUG' is set. */ if (yydebug) { YYFPRINTF (stderr, "Next token is %d (%s", yychar, yytname[yychar1]); /* Give the individual parser a way to print the precise meaning of a token, for further debugging info. */ # ifdef YYPRINT YYPRINT (stderr, yychar, yylval); # endif YYFPRINTF (stderr, ")\n"); } #endif } yyn += yychar1; if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != yychar1) goto yydefault; yyn = yytable[yyn]; /* yyn is what to do for this token type in this state. Negative => reduce, -yyn is rule number. Positive => shift, yyn is new state. New state is final state => don't bother to shift, just return success. 0, or most negative number => error. */ if (yyn < 0) { if (yyn == YYFLAG) goto yyerrlab; yyn = -yyn; goto yyreduce; } else if (yyn == 0) goto yyerrlab; if (yyn == YYFINAL) YYACCEPT; /* Shift the lookahead token. */ YYDPRINTF ((stderr, "Shifting token %d (%s), ", yychar, yytname[yychar1])); /* Discard the token being shifted unless it is eof. */ if (yychar != YYEOF) yychar = YYEMPTY; *++yyvsp = yylval; #if YYLSP_NEEDED *++yylsp = yylloc; #endif /* Count tokens shifted since error; after three, turn off error status. */ if (yyerrstatus) yyerrstatus--; yystate = yyn; goto yynewstate; /*-----------------------------------------------------------. | yydefault -- do the default action for the current state. | `-----------------------------------------------------------*/ yydefault: yyn = yydefact[yystate]; if (yyn == 0) goto yyerrlab; goto yyreduce; /*-----------------------------. | yyreduce -- Do a reduction. | `-----------------------------*/ yyreduce: /* yyn is the number of a rule to reduce with. */ yylen = yyr2[yyn]; /* If YYLEN is nonzero, implement the default value of the action: `$$ = $1'. Otherwise, the following line sets YYVAL to the semantic value of the lookahead token. This behavior is undocumented and Bison users should not rely upon it. Assigning to YYVAL unconditionally makes the parser a bit smaller, and it avoids a GCC warning that YYVAL may be used uninitialized. */ yyval = yyvsp[1-yylen]; #if YYLSP_NEEDED /* Similarly for the default location. Let the user run additional commands if for instance locations are ranges. */ yyloc = yylsp[1-yylen]; YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen); #endif #if YYDEBUG /* We have to keep this `#if YYDEBUG', since we use variables which are defined only if `YYDEBUG' is set. */ if (yydebug) { int yyi; YYFPRINTF (stderr, "Reducing via rule %d (line %d), ", yyn, yyrline[yyn]); /* Print the symbols being reduced, and their result. */ for (yyi = yyprhs[yyn]; yyrhs[yyi] > 0; yyi++) YYFPRINTF (stderr, "%s ", yytname[yyrhs[yyi]]); YYFPRINTF (stderr, " -> %s\n", yytname[yyr1[yyn]]); } #endif switch (yyn) { case 1: #line 175 "plural.y" { if (yyvsp[0].exp == NULL) YYABORT; ((struct parse_args *) arg)->res = yyvsp[0].exp; } break; case 2: #line 183 "plural.y" { yyval.exp = new_exp_3 (qmop, yyvsp[-4].exp, yyvsp[-2].exp, yyvsp[0].exp); } break; case 3: #line 187 "plural.y" { yyval.exp = new_exp_2 (lor, yyvsp[-2].exp, yyvsp[0].exp); } break; case 4: #line 191 "plural.y" { yyval.exp = new_exp_2 (land, yyvsp[-2].exp, yyvsp[0].exp); } break; case 5: #line 195 "plural.y" { yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp); } break; case 6: #line 199 "plural.y" { yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp); } break; case 7: #line 203 "plural.y" { yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp); } break; case 8: #line 207 "plural.y" { yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp); } break; case 9: #line 211 "plural.y" { yyval.exp = new_exp_1 (lnot, yyvsp[0].exp); } break; case 10: #line 215 "plural.y" { yyval.exp = new_exp_0 (var); } break; case 11: #line 219 "plural.y" { if ((yyval.exp = new_exp_0 (num)) != NULL) yyval.exp->val.num = yyvsp[0].num; } break; case 12: #line 224 "plural.y" { yyval.exp = yyvsp[-1].exp; } break; } #line 705 "/usr/local/share/bison/bison.simple" yyvsp -= yylen; yyssp -= yylen; #if YYLSP_NEEDED yylsp -= yylen; #endif #if YYDEBUG if (yydebug) { short *yyssp1 = yyss - 1; YYFPRINTF (stderr, "state stack now"); while (yyssp1 != yyssp) YYFPRINTF (stderr, " %d", *++yyssp1); YYFPRINTF (stderr, "\n"); } #endif *++yyvsp = yyval; #if YYLSP_NEEDED *++yylsp = yyloc; #endif /* Now `shift' the result of the reduction. Determine what state that goes to, based on the state we popped back to and the rule number reduced by. */ yyn = yyr1[yyn]; yystate = yypgoto[yyn - YYNTBASE] + *yyssp; if (yystate >= 0 && yystate <= YYLAST && yycheck[yystate] == *yyssp) yystate = yytable[yystate]; else yystate = yydefgoto[yyn - YYNTBASE]; goto yynewstate; /*------------------------------------. | yyerrlab -- here on detecting error | `------------------------------------*/ yyerrlab: /* If not already recovering from an error, report this error. */ if (!yyerrstatus) { ++yynerrs; #ifdef YYERROR_VERBOSE yyn = yypact[yystate]; if (yyn > YYFLAG && yyn < YYLAST) { YYSIZE_T yysize = 0; char *yymsg; int yyx, yycount; yycount = 0; /* Start YYX at -YYN if negative to avoid negative indexes in YYCHECK. */ for (yyx = yyn < 0 ? -yyn : 0; yyx < (int) (sizeof (yytname) / sizeof (char *)); yyx++) if (yycheck[yyx + yyn] == yyx) yysize += yystrlen (yytname[yyx]) + 15, yycount++; yysize += yystrlen ("parse error, unexpected ") + 1; yysize += yystrlen (yytname[YYTRANSLATE (yychar)]); yymsg = (char *) YYSTACK_ALLOC (yysize); if (yymsg != 0) { char *yyp = yystpcpy (yymsg, "parse error, unexpected "); yyp = yystpcpy (yyp, yytname[YYTRANSLATE (yychar)]); if (yycount < 5) { yycount = 0; for (yyx = yyn < 0 ? -yyn : 0; yyx < (int) (sizeof (yytname) / sizeof (char *)); yyx++) if (yycheck[yyx + yyn] == yyx) { const char *yyq = ! yycount ? ", expecting " : " or "; yyp = yystpcpy (yyp, yyq); yyp = yystpcpy (yyp, yytname[yyx]); yycount++; } } yyerror (yymsg); YYSTACK_FREE (yymsg); } else yyerror ("parse error; also virtual memory exhausted"); } else #endif /* defined (YYERROR_VERBOSE) */ yyerror ("parse error"); } goto yyerrlab1; /*--------------------------------------------------. | yyerrlab1 -- error raised explicitly by an action | `--------------------------------------------------*/ yyerrlab1: if (yyerrstatus == 3) { /* If just tried and failed to reuse lookahead token after an error, discard it. */ /* return failure if at end of input */ if (yychar == YYEOF) YYABORT; YYDPRINTF ((stderr, "Discarding token %d (%s).\n", yychar, yytname[yychar1])); yychar = YYEMPTY; } /* Else will try to reuse lookahead token after shifting the error token. */ yyerrstatus = 3; /* Each real token shifted decrements this */ goto yyerrhandle; /*-------------------------------------------------------------------. | yyerrdefault -- current state does not do anything special for the | | error token. | `-------------------------------------------------------------------*/ yyerrdefault: #if 0 /* This is wrong; only states that explicitly want error tokens should shift them. */ /* If its default is to accept any token, ok. Otherwise pop it. */ yyn = yydefact[yystate]; if (yyn) goto yydefault; #endif /*---------------------------------------------------------------. | yyerrpop -- pop the current state because it cannot handle the | | error token | `---------------------------------------------------------------*/ yyerrpop: if (yyssp == yyss) YYABORT; yyvsp--; yystate = *--yyssp; #if YYLSP_NEEDED yylsp--; #endif #if YYDEBUG if (yydebug) { short *yyssp1 = yyss - 1; YYFPRINTF (stderr, "Error: state stack now"); while (yyssp1 != yyssp) YYFPRINTF (stderr, " %d", *++yyssp1); YYFPRINTF (stderr, "\n"); } #endif /*--------------. | yyerrhandle. | `--------------*/ yyerrhandle: yyn = yypact[yystate]; if (yyn == YYFLAG) goto yyerrdefault; yyn += YYTERROR; if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != YYTERROR) goto yyerrdefault; yyn = yytable[yyn]; if (yyn < 0) { if (yyn == YYFLAG) goto yyerrpop; yyn = -yyn; goto yyreduce; } else if (yyn == 0) goto yyerrpop; if (yyn == YYFINAL) YYACCEPT; YYDPRINTF ((stderr, "Shifting error token, ")); *++yyvsp = yylval; #if YYLSP_NEEDED *++yylsp = yylloc; #endif yystate = yyn; goto yynewstate; /*-------------------------------------. | yyacceptlab -- YYACCEPT comes here. | `-------------------------------------*/ yyacceptlab: yyresult = 0; goto yyreturn; /*-----------------------------------. | yyabortlab -- YYABORT comes here. | `-----------------------------------*/ yyabortlab: yyresult = 1; goto yyreturn; /*---------------------------------------------. | yyoverflowab -- parser overflow comes here. | `---------------------------------------------*/ yyoverflowlab: yyerror ("parser stack overflow"); yyresult = 2; /* Fall through. */ yyreturn: #ifndef yyoverflow if (yyss != yyssa) YYSTACK_FREE (yyss); #endif return yyresult; } #line 229 "plural.y" void internal_function FREE_EXPRESSION (exp) struct expression *exp; { if (exp == NULL) return; /* Handle the recursive case. */ switch (exp->nargs) { case 3: FREE_EXPRESSION (exp->val.args[2]); /* FALLTHROUGH */ case 2: FREE_EXPRESSION (exp->val.args[1]); /* FALLTHROUGH */ case 1: FREE_EXPRESSION (exp->val.args[0]); /* FALLTHROUGH */ default: break; } free (exp); } static int yylex (lval, pexp) YYSTYPE *lval; const char **pexp; { const char *exp = *pexp; int result; while (1) { if (exp[0] == '\0') { *pexp = exp; return YYEOF; } if (exp[0] != ' ' && exp[0] != '\t') break; ++exp; } result = *exp++; switch (result) { case '0': case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': { unsigned long int n = result - '0'; while (exp[0] >= '0' && exp[0] <= '9') { n *= 10; n += exp[0] - '0'; ++exp; } lval->num = n; result = NUMBER; } break; case '=': if (exp[0] == '=') { ++exp; lval->op = equal; result = EQUOP2; } else result = YYERRCODE; break; case '!': if (exp[0] == '=') { ++exp; lval->op = not_equal; result = EQUOP2; } break; case '&': case '|': if (exp[0] == result) ++exp; else result = YYERRCODE; break; case '<': if (exp[0] == '=') { ++exp; lval->op = less_or_equal; } else lval->op = less_than; result = CMPOP2; break; case '>': if (exp[0] == '=') { ++exp; lval->op = greater_or_equal; } else lval->op = greater_than; result = CMPOP2; break; case '*': lval->op = mult; result = MULOP2; break; case '/': lval->op = divide; result = MULOP2; break; case '%': lval->op = module; result = MULOP2; break; case '+': lval->op = plus; result = ADDOP2; break; case '-': lval->op = minus; result = ADDOP2; break; case 'n': case '?': case ':': case '(': case ')': /* Nothing, just return the character. */ break; case ';': case '\n': case '\0': /* Be safe and let the user call this function again. */ --exp; result = YYEOF; break; default: result = YYERRCODE; #if YYDEBUG != 0 --exp; #endif break; } *pexp = exp; return result; } static void yyerror (str) const char *str; { /* Do nothing. We don't print error messages here. */ } kasumi-2.5/intl/gettext.c0000644000175000017500000000357310142036016012371 00000000000000/* Implementation of gettext(3) function. Copyright (C) 1995, 1997, 2000, 2001, 2002 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifdef HAVE_CONFIG_H # include #endif #ifdef _LIBC # define __need_NULL # include #else # include /* Just for NULL. */ #endif #include "gettextP.h" #ifdef _LIBC # include #else # include "libgnuintl.h" #endif /* @@ end of prolog @@ */ /* Names for the libintl functions are a problem. They must not clash with existing names and they should follow ANSI C. But this source code is also used in GNU C Library where the names have a __ prefix. So we have to make a difference here. */ #ifdef _LIBC # define GETTEXT __gettext # define DCGETTEXT INTUSE(__dcgettext) #else # define GETTEXT libintl_gettext # define DCGETTEXT libintl_dcgettext #endif /* Look up MSGID in the current default message catalog for the current LC_MESSAGES locale. If not found, returns MSGID itself (the default text). */ char * GETTEXT (msgid) const char *msgid; { return DCGETTEXT (NULL, msgid, LC_MESSAGES); } #ifdef _LIBC /* Alias for function name in GNU C Library. */ weak_alias (__gettext, gettext); #endif kasumi-2.5/intl/VERSION0000644000175000017500000000005010142036015011573 00000000000000GNU gettext library from gettext-0.12.1 kasumi-2.5/intl/relocatable.c0000644000175000017500000003071610142036016013161 00000000000000/* Provide relocatable packages. Copyright (C) 2003 Free Software Foundation, Inc. Written by Bruno Haible , 2003. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Tell glibc's to provide a prototype for getline(). This must come before because may include , and once has been included, it's too late. */ #ifndef _GNU_SOURCE # define _GNU_SOURCE 1 #endif #ifdef HAVE_CONFIG_H # include "config.h" #endif /* Specification. */ #include "relocatable.h" #if ENABLE_RELOCATABLE #include #include #include #include #ifdef NO_XMALLOC # define xmalloc malloc #else # include "xmalloc.h" #endif #if DEPENDS_ON_LIBCHARSET # include #endif #if DEPENDS_ON_LIBICONV && HAVE_ICONV # include #endif #if DEPENDS_ON_LIBINTL && ENABLE_NLS # include #endif /* Faked cheap 'bool'. */ #undef bool #undef false #undef true #define bool int #define false 0 #define true 1 /* Pathname support. ISSLASH(C) tests whether C is a directory separator character. IS_PATH_WITH_DIR(P) tests whether P contains a directory specification. */ #if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__ /* Win32, OS/2, DOS */ # define ISSLASH(C) ((C) == '/' || (C) == '\\') # define HAS_DEVICE(P) \ ((((P)[0] >= 'A' && (P)[0] <= 'Z') || ((P)[0] >= 'a' && (P)[0] <= 'z')) \ && (P)[1] == ':') # define IS_PATH_WITH_DIR(P) \ (strchr (P, '/') != NULL || strchr (P, '\\') != NULL || HAS_DEVICE (P)) # define FILESYSTEM_PREFIX_LEN(P) (HAS_DEVICE (P) ? 2 : 0) #else /* Unix */ # define ISSLASH(C) ((C) == '/') # define IS_PATH_WITH_DIR(P) (strchr (P, '/') != NULL) # define FILESYSTEM_PREFIX_LEN(P) 0 #endif /* Original installation prefix. */ static char *orig_prefix; static size_t orig_prefix_len; /* Current installation prefix. */ static char *curr_prefix; static size_t curr_prefix_len; /* These prefixes do not end in a slash. Anything that will be concatenated to them must start with a slash. */ /* Sets the original and the current installation prefix of this module. Relocation simply replaces a pathname starting with the original prefix by the corresponding pathname with the current prefix instead. Both prefixes should be directory names without trailing slash (i.e. use "" instead of "/"). */ static void set_this_relocation_prefix (const char *orig_prefix_arg, const char *curr_prefix_arg) { if (orig_prefix_arg != NULL && curr_prefix_arg != NULL /* Optimization: if orig_prefix and curr_prefix are equal, the relocation is a nop. */ && strcmp (orig_prefix_arg, curr_prefix_arg) != 0) { /* Duplicate the argument strings. */ char *memory; orig_prefix_len = strlen (orig_prefix_arg); curr_prefix_len = strlen (curr_prefix_arg); memory = (char *) xmalloc (orig_prefix_len + 1 + curr_prefix_len + 1); #ifdef NO_XMALLOC if (memory != NULL) #endif { memcpy (memory, orig_prefix_arg, orig_prefix_len + 1); orig_prefix = memory; memory += orig_prefix_len + 1; memcpy (memory, curr_prefix_arg, curr_prefix_len + 1); curr_prefix = memory; return; } } orig_prefix = NULL; curr_prefix = NULL; /* Don't worry about wasted memory here - this function is usually only called once. */ } /* Sets the original and the current installation prefix of the package. Relocation simply replaces a pathname starting with the original prefix by the corresponding pathname with the current prefix instead. Both prefixes should be directory names without trailing slash (i.e. use "" instead of "/"). */ void set_relocation_prefix (const char *orig_prefix_arg, const char *curr_prefix_arg) { set_this_relocation_prefix (orig_prefix_arg, curr_prefix_arg); /* Now notify all dependent libraries. */ #if DEPENDS_ON_LIBCHARSET libcharset_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg); #endif #if DEPENDS_ON_LIBICONV && HAVE_ICONV && _LIBICONV_VERSION >= 0x0109 libiconv_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg); #endif #if DEPENDS_ON_LIBINTL && ENABLE_NLS && defined libintl_set_relocation_prefix libintl_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg); #endif } /* Convenience function: Computes the current installation prefix, based on the original installation prefix, the original installation directory of a particular file, and the current pathname of this file. Returns NULL upon failure. */ #ifdef IN_LIBRARY #define compute_curr_prefix local_compute_curr_prefix static #endif const char * compute_curr_prefix (const char *orig_installprefix, const char *orig_installdir, const char *curr_pathname) { const char *curr_installdir; const char *rel_installdir; if (curr_pathname == NULL) return NULL; /* Determine the relative installation directory, relative to the prefix. This is simply the difference between orig_installprefix and orig_installdir. */ if (strncmp (orig_installprefix, orig_installdir, strlen (orig_installprefix)) != 0) /* Shouldn't happen - nothing should be installed outside $(prefix). */ return NULL; rel_installdir = orig_installdir + strlen (orig_installprefix); /* Determine the current installation directory. */ { const char *p_base = curr_pathname + FILESYSTEM_PREFIX_LEN (curr_pathname); const char *p = curr_pathname + strlen (curr_pathname); char *q; while (p > p_base) { p--; if (ISSLASH (*p)) break; } q = (char *) xmalloc (p - curr_pathname + 1); #ifdef NO_XMALLOC if (q == NULL) return NULL; #endif memcpy (q, curr_pathname, p - curr_pathname); q[p - curr_pathname] = '\0'; curr_installdir = q; } /* Compute the current installation prefix by removing the trailing rel_installdir from it. */ { const char *rp = rel_installdir + strlen (rel_installdir); const char *cp = curr_installdir + strlen (curr_installdir); const char *cp_base = curr_installdir + FILESYSTEM_PREFIX_LEN (curr_installdir); while (rp > rel_installdir && cp > cp_base) { bool same = false; const char *rpi = rp; const char *cpi = cp; while (rpi > rel_installdir && cpi > cp_base) { rpi--; cpi--; if (ISSLASH (*rpi) || ISSLASH (*cpi)) { if (ISSLASH (*rpi) && ISSLASH (*cpi)) same = true; break; } #if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__ /* Win32, OS/2, DOS - case insignificant filesystem */ if ((*rpi >= 'a' && *rpi <= 'z' ? *rpi - 'a' + 'A' : *rpi) != (*cpi >= 'a' && *cpi <= 'z' ? *cpi - 'a' + 'A' : *cpi)) break; #else if (*rpi != *cpi) break; #endif } if (!same) break; /* The last pathname component was the same. opi and cpi now point to the slash before it. */ rp = rpi; cp = cpi; } if (rp > rel_installdir) /* Unexpected: The curr_installdir does not end with rel_installdir. */ return NULL; { size_t curr_prefix_len = cp - curr_installdir; char *curr_prefix; curr_prefix = (char *) xmalloc (curr_prefix_len + 1); #ifdef NO_XMALLOC if (curr_prefix == NULL) return NULL; #endif memcpy (curr_prefix, curr_installdir, curr_prefix_len); curr_prefix[curr_prefix_len] = '\0'; return curr_prefix; } } } #if defined PIC && defined INSTALLDIR /* Full pathname of shared library, or NULL. */ static char *shared_library_fullname; #if defined _WIN32 || defined __WIN32__ /* Determine the full pathname of the shared library when it is loaded. */ BOOL WINAPI DllMain (HINSTANCE module_handle, DWORD event, LPVOID reserved) { (void) reserved; if (event == DLL_PROCESS_ATTACH) { /* The DLL is being loaded into an application's address range. */ static char location[MAX_PATH]; if (!GetModuleFileName (module_handle, location, sizeof (location))) /* Shouldn't happen. */ return FALSE; if (!IS_PATH_WITH_DIR (location)) /* Shouldn't happen. */ return FALSE; shared_library_fullname = strdup (location); } return TRUE; } #else /* Unix */ static void find_shared_library_fullname () { #ifdef __linux__ FILE *fp; /* Open the current process' maps file. It describes one VMA per line. */ fp = fopen ("/proc/self/maps", "r"); if (fp) { unsigned long address = (unsigned long) &find_shared_library_fullname; for (;;) { unsigned long start, end; int c; if (fscanf (fp, "%lx-%lx", &start, &end) != 2) break; if (address >= start && address <= end - 1) { /* Found it. Now see if this line contains a filename. */ while (c = getc (fp), c != EOF && c != '\n' && c != '/') continue; if (c == '/') { size_t size; int len; ungetc (c, fp); shared_library_fullname = NULL; size = 0; len = getline (&shared_library_fullname, &size, fp); if (len >= 0) { /* Success: filled shared_library_fullname. */ if (len > 0 && shared_library_fullname[len - 1] == '\n') shared_library_fullname[len - 1] = '\0'; } } break; } while (c = getc (fp), c != EOF && c != '\n') continue; } fclose (fp); } #endif } #endif /* WIN32 / Unix */ /* Return the full pathname of the current shared library. Return NULL if unknown. Guaranteed to work only on Linux and Woe32. */ static char * get_shared_library_fullname () { #if !(defined _WIN32 || defined __WIN32__) static bool tried_find_shared_library_fullname; if (!tried_find_shared_library_fullname) { find_shared_library_fullname (); tried_find_shared_library_fullname = true; } #endif return shared_library_fullname; } #endif /* PIC */ /* Returns the pathname, relocated according to the current installation directory. */ const char * relocate (const char *pathname) { #if defined PIC && defined INSTALLDIR static int initialized; /* Initialization code for a shared library. */ if (!initialized) { /* At this point, orig_prefix and curr_prefix likely have already been set through the main program's set_program_name_and_installdir function. This is sufficient in the case that the library has initially been installed in the same orig_prefix. But we can do better, to also cover the cases that 1. it has been installed in a different prefix before being moved to orig_prefix and (later) to curr_prefix, 2. unlike the program, it has not moved away from orig_prefix. */ const char *orig_installprefix = INSTALLPREFIX; const char *orig_installdir = INSTALLDIR; const char *curr_prefix_better; curr_prefix_better = compute_curr_prefix (orig_installprefix, orig_installdir, get_shared_library_fullname ()); if (curr_prefix_better == NULL) curr_prefix_better = curr_prefix; set_relocation_prefix (orig_installprefix, curr_prefix_better); initialized = 1; } #endif /* Note: It is not necessary to perform case insensitive comparison here, even for DOS-like filesystems, because the pathname argument was typically created from the same Makefile variable as orig_prefix came from. */ if (orig_prefix != NULL && curr_prefix != NULL && strncmp (pathname, orig_prefix, orig_prefix_len) == 0) { if (pathname[orig_prefix_len] == '\0') /* pathname equals orig_prefix. */ return curr_prefix; if (ISSLASH (pathname[orig_prefix_len])) { /* pathname starts with orig_prefix. */ const char *pathname_tail = &pathname[orig_prefix_len]; char *result = (char *) xmalloc (curr_prefix_len + strlen (pathname_tail) + 1); #ifdef NO_XMALLOC if (result != NULL) #endif { memcpy (result, curr_prefix, curr_prefix_len); strcpy (result + curr_prefix_len, pathname_tail); return result; } } } /* Nothing to relocate. */ return pathname; } #endif kasumi-2.5/intl/explodename.c0000644000175000017500000001105010142036016013173 00000000000000/* Copyright (C) 1995-1998, 2000, 2001 Free Software Foundation, Inc. Contributed by Ulrich Drepper , 1995. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifdef HAVE_CONFIG_H # include #endif #include #include #include #include "loadinfo.h" /* On some strange systems still no definition of NULL is found. Sigh! */ #ifndef NULL # if defined __STDC__ && __STDC__ # define NULL ((void *) 0) # else # define NULL 0 # endif #endif /* @@ end of prolog @@ */ char * _nl_find_language (name) const char *name; { while (name[0] != '\0' && name[0] != '_' && name[0] != '@' && name[0] != '+' && name[0] != ',') ++name; return (char *) name; } int _nl_explode_name (name, language, modifier, territory, codeset, normalized_codeset, special, sponsor, revision) char *name; const char **language; const char **modifier; const char **territory; const char **codeset; const char **normalized_codeset; const char **special; const char **sponsor; const char **revision; { enum { undecided, xpg, cen } syntax; char *cp; int mask; *modifier = NULL; *territory = NULL; *codeset = NULL; *normalized_codeset = NULL; *special = NULL; *sponsor = NULL; *revision = NULL; /* Now we determine the single parts of the locale name. First look for the language. Termination symbols are `_' and `@' if we use XPG4 style, and `_', `+', and `,' if we use CEN syntax. */ mask = 0; syntax = undecided; *language = cp = name; cp = _nl_find_language (*language); if (*language == cp) /* This does not make sense: language has to be specified. Use this entry as it is without exploding. Perhaps it is an alias. */ cp = strchr (*language, '\0'); else if (cp[0] == '_') { /* Next is the territory. */ cp[0] = '\0'; *territory = ++cp; while (cp[0] != '\0' && cp[0] != '.' && cp[0] != '@' && cp[0] != '+' && cp[0] != ',' && cp[0] != '_') ++cp; mask |= TERRITORY; if (cp[0] == '.') { /* Next is the codeset. */ syntax = xpg; cp[0] = '\0'; *codeset = ++cp; while (cp[0] != '\0' && cp[0] != '@') ++cp; mask |= XPG_CODESET; if (*codeset != cp && (*codeset)[0] != '\0') { *normalized_codeset = _nl_normalize_codeset (*codeset, cp - *codeset); if (strcmp (*codeset, *normalized_codeset) == 0) free ((char *) *normalized_codeset); else mask |= XPG_NORM_CODESET; } } } if (cp[0] == '@' || (syntax != xpg && cp[0] == '+')) { /* Next is the modifier. */ syntax = cp[0] == '@' ? xpg : cen; cp[0] = '\0'; *modifier = ++cp; while (syntax == cen && cp[0] != '\0' && cp[0] != '+' && cp[0] != ',' && cp[0] != '_') ++cp; mask |= XPG_MODIFIER | CEN_AUDIENCE; } if (syntax != xpg && (cp[0] == '+' || cp[0] == ',' || cp[0] == '_')) { syntax = cen; if (cp[0] == '+') { /* Next is special application (CEN syntax). */ cp[0] = '\0'; *special = ++cp; while (cp[0] != '\0' && cp[0] != ',' && cp[0] != '_') ++cp; mask |= CEN_SPECIAL; } if (cp[0] == ',') { /* Next is sponsor (CEN syntax). */ cp[0] = '\0'; *sponsor = ++cp; while (cp[0] != '\0' && cp[0] != '_') ++cp; mask |= CEN_SPONSOR; } if (cp[0] == '_') { /* Next is revision (CEN syntax). */ cp[0] = '\0'; *revision = ++cp; mask |= CEN_REVISION; } } /* For CEN syntax values it might be important to have the separator character in the file name, not for XPG syntax. */ if (syntax == xpg) { if (*territory != NULL && (*territory)[0] == '\0') mask &= ~TERRITORY; if (*codeset != NULL && (*codeset)[0] == '\0') mask &= ~XPG_CODESET; if (*modifier != NULL && (*modifier)[0] == '\0') mask &= ~XPG_MODIFIER; } return mask; } kasumi-2.5/intl/os2compat.h0000644000175000017500000000302210142036016012606 00000000000000/* OS/2 compatibility defines. This file is intended to be included from config.h Copyright (C) 2001-2002 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* When included from os2compat.h we need all the original definitions */ #ifndef OS2_AWARE #undef LIBDIR #define LIBDIR _nlos2_libdir extern char *_nlos2_libdir; #undef LOCALEDIR #define LOCALEDIR _nlos2_localedir extern char *_nlos2_localedir; #undef LOCALE_ALIAS_PATH #define LOCALE_ALIAS_PATH _nlos2_localealiaspath extern char *_nlos2_localealiaspath; #endif #undef HAVE_STRCASECMP #define HAVE_STRCASECMP 1 #define strcasecmp stricmp #define strncasecmp strnicmp /* We have our own getenv() which works even if library is compiled as DLL */ #define getenv _nl_getenv /* Older versions of gettext used -1 as the value of LC_MESSAGES */ #define LC_MESSAGES_COMPAT (-1) kasumi-2.5/intl/dgettext.c0000644000175000017500000000343010142036016012525 00000000000000/* Implementation of the dgettext(3) function. Copyright (C) 1995-1997, 2000, 2001, 2002 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifdef HAVE_CONFIG_H # include #endif #include #include "gettextP.h" #ifdef _LIBC # include #else # include "libgnuintl.h" #endif /* @@ end of prolog @@ */ /* Names for the libintl functions are a problem. They must not clash with existing names and they should follow ANSI C. But this source code is also used in GNU C Library where the names have a __ prefix. So we have to make a difference here. */ #ifdef _LIBC # define DGETTEXT __dgettext # define DCGETTEXT INTUSE(__dcgettext) #else # define DGETTEXT libintl_dgettext # define DCGETTEXT libintl_dcgettext #endif /* Look up MSGID in the DOMAINNAME message catalog of the current LC_MESSAGES locale. */ char * DGETTEXT (domainname, msgid) const char *domainname; const char *msgid; { return DCGETTEXT (domainname, msgid, LC_MESSAGES); } #ifdef _LIBC /* Alias for function name in GNU C Library. */ weak_alias (__dgettext, dgettext); #endif kasumi-2.5/intl/l10nflist.c0000644000175000017500000003052010142036016012511 00000000000000/* Copyright (C) 1995-1999, 2000, 2001, 2002 Free Software Foundation, Inc. Contributed by Ulrich Drepper , 1995. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Tell glibc's to provide a prototype for stpcpy(). This must come before because may include , and once has been included, it's too late. */ #ifndef _GNU_SOURCE # define _GNU_SOURCE 1 #endif #ifdef HAVE_CONFIG_H # include #endif #include #if defined _LIBC || defined HAVE_ARGZ_H # include #endif #include #include #include #include "loadinfo.h" /* On some strange systems still no definition of NULL is found. Sigh! */ #ifndef NULL # if defined __STDC__ && __STDC__ # define NULL ((void *) 0) # else # define NULL 0 # endif #endif /* @@ end of prolog @@ */ #ifdef _LIBC /* Rename the non ANSI C functions. This is required by the standard because some ANSI C functions will require linking with this object file and the name space must not be polluted. */ # ifndef stpcpy # define stpcpy(dest, src) __stpcpy(dest, src) # endif #else # ifndef HAVE_STPCPY static char *stpcpy PARAMS ((char *dest, const char *src)); # endif #endif /* Pathname support. ISSLASH(C) tests whether C is a directory separator character. IS_ABSOLUTE_PATH(P) tests whether P is an absolute path. If it is not, it may be concatenated to a directory pathname. */ #if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__ /* Win32, OS/2, DOS */ # define ISSLASH(C) ((C) == '/' || (C) == '\\') # define HAS_DEVICE(P) \ ((((P)[0] >= 'A' && (P)[0] <= 'Z') || ((P)[0] >= 'a' && (P)[0] <= 'z')) \ && (P)[1] == ':') # define IS_ABSOLUTE_PATH(P) (ISSLASH ((P)[0]) || HAS_DEVICE (P)) #else /* Unix */ # define ISSLASH(C) ((C) == '/') # define IS_ABSOLUTE_PATH(P) ISSLASH ((P)[0]) #endif /* Define function which are usually not available. */ #if !defined _LIBC && !defined HAVE___ARGZ_COUNT /* Returns the number of strings in ARGZ. */ static size_t argz_count__ PARAMS ((const char *argz, size_t len)); static size_t argz_count__ (argz, len) const char *argz; size_t len; { size_t count = 0; while (len > 0) { size_t part_len = strlen (argz); argz += part_len + 1; len -= part_len + 1; count++; } return count; } # undef __argz_count # define __argz_count(argz, len) argz_count__ (argz, len) #else # ifdef _LIBC # define __argz_count(argz, len) INTUSE(__argz_count) (argz, len) # endif #endif /* !_LIBC && !HAVE___ARGZ_COUNT */ #if !defined _LIBC && !defined HAVE___ARGZ_STRINGIFY /* Make '\0' separated arg vector ARGZ printable by converting all the '\0's except the last into the character SEP. */ static void argz_stringify__ PARAMS ((char *argz, size_t len, int sep)); static void argz_stringify__ (argz, len, sep) char *argz; size_t len; int sep; { while (len > 0) { size_t part_len = strlen (argz); argz += part_len; len -= part_len + 1; if (len > 0) *argz++ = sep; } } # undef __argz_stringify # define __argz_stringify(argz, len, sep) argz_stringify__ (argz, len, sep) #else # ifdef _LIBC # define __argz_stringify(argz, len, sep) \ INTUSE(__argz_stringify) (argz, len, sep) # endif #endif /* !_LIBC && !HAVE___ARGZ_STRINGIFY */ #if !defined _LIBC && !defined HAVE___ARGZ_NEXT static char *argz_next__ PARAMS ((char *argz, size_t argz_len, const char *entry)); static char * argz_next__ (argz, argz_len, entry) char *argz; size_t argz_len; const char *entry; { if (entry) { if (entry < argz + argz_len) entry = strchr (entry, '\0') + 1; return entry >= argz + argz_len ? NULL : (char *) entry; } else if (argz_len > 0) return argz; else return 0; } # undef __argz_next # define __argz_next(argz, len, entry) argz_next__ (argz, len, entry) #endif /* !_LIBC && !HAVE___ARGZ_NEXT */ /* Return number of bits set in X. */ static int pop PARAMS ((int x)); static inline int pop (x) int x; { /* We assume that no more than 16 bits are used. */ x = ((x & ~0x5555) >> 1) + (x & 0x5555); x = ((x & ~0x3333) >> 2) + (x & 0x3333); x = ((x >> 4) + x) & 0x0f0f; x = ((x >> 8) + x) & 0xff; return x; } struct loaded_l10nfile * _nl_make_l10nflist (l10nfile_list, dirlist, dirlist_len, mask, language, territory, codeset, normalized_codeset, modifier, special, sponsor, revision, filename, do_allocate) struct loaded_l10nfile **l10nfile_list; const char *dirlist; size_t dirlist_len; int mask; const char *language; const char *territory; const char *codeset; const char *normalized_codeset; const char *modifier; const char *special; const char *sponsor; const char *revision; const char *filename; int do_allocate; { char *abs_filename; struct loaded_l10nfile **lastp; struct loaded_l10nfile *retval; char *cp; size_t dirlist_count; size_t entries; int cnt; /* If LANGUAGE contains an absolute directory specification, we ignore DIRLIST. */ if (IS_ABSOLUTE_PATH (language)) dirlist_len = 0; /* Allocate room for the full file name. */ abs_filename = (char *) malloc (dirlist_len + strlen (language) + ((mask & TERRITORY) != 0 ? strlen (territory) + 1 : 0) + ((mask & XPG_CODESET) != 0 ? strlen (codeset) + 1 : 0) + ((mask & XPG_NORM_CODESET) != 0 ? strlen (normalized_codeset) + 1 : 0) + (((mask & XPG_MODIFIER) != 0 || (mask & CEN_AUDIENCE) != 0) ? strlen (modifier) + 1 : 0) + ((mask & CEN_SPECIAL) != 0 ? strlen (special) + 1 : 0) + (((mask & CEN_SPONSOR) != 0 || (mask & CEN_REVISION) != 0) ? (1 + ((mask & CEN_SPONSOR) != 0 ? strlen (sponsor) : 0) + ((mask & CEN_REVISION) != 0 ? strlen (revision) + 1 : 0)) : 0) + 1 + strlen (filename) + 1); if (abs_filename == NULL) return NULL; /* Construct file name. */ cp = abs_filename; if (dirlist_len > 0) { memcpy (cp, dirlist, dirlist_len); __argz_stringify (cp, dirlist_len, PATH_SEPARATOR); cp += dirlist_len; cp[-1] = '/'; } cp = stpcpy (cp, language); if ((mask & TERRITORY) != 0) { *cp++ = '_'; cp = stpcpy (cp, territory); } if ((mask & XPG_CODESET) != 0) { *cp++ = '.'; cp = stpcpy (cp, codeset); } if ((mask & XPG_NORM_CODESET) != 0) { *cp++ = '.'; cp = stpcpy (cp, normalized_codeset); } if ((mask & (XPG_MODIFIER | CEN_AUDIENCE)) != 0) { /* This component can be part of both syntaces but has different leading characters. For CEN we use `+', else `@'. */ *cp++ = (mask & CEN_AUDIENCE) != 0 ? '+' : '@'; cp = stpcpy (cp, modifier); } if ((mask & CEN_SPECIAL) != 0) { *cp++ = '+'; cp = stpcpy (cp, special); } if ((mask & (CEN_SPONSOR | CEN_REVISION)) != 0) { *cp++ = ','; if ((mask & CEN_SPONSOR) != 0) cp = stpcpy (cp, sponsor); if ((mask & CEN_REVISION) != 0) { *cp++ = '_'; cp = stpcpy (cp, revision); } } *cp++ = '/'; stpcpy (cp, filename); /* Look in list of already loaded domains whether it is already available. */ lastp = l10nfile_list; for (retval = *l10nfile_list; retval != NULL; retval = retval->next) if (retval->filename != NULL) { int compare = strcmp (retval->filename, abs_filename); if (compare == 0) /* We found it! */ break; if (compare < 0) { /* It's not in the list. */ retval = NULL; break; } lastp = &retval->next; } if (retval != NULL || do_allocate == 0) { free (abs_filename); return retval; } dirlist_count = (dirlist_len > 0 ? __argz_count (dirlist, dirlist_len) : 1); /* Allocate a new loaded_l10nfile. */ retval = (struct loaded_l10nfile *) malloc (sizeof (*retval) + (((dirlist_count << pop (mask)) + (dirlist_count > 1 ? 1 : 0)) * sizeof (struct loaded_l10nfile *))); if (retval == NULL) return NULL; retval->filename = abs_filename; /* We set retval->data to NULL here; it is filled in later. Setting retval->decided to 1 here means that retval does not correspond to a real file (dirlist_count > 1) or is not worth looking up (if an unnormalized codeset was specified). */ retval->decided = (dirlist_count > 1 || ((mask & XPG_CODESET) != 0 && (mask & XPG_NORM_CODESET) != 0)); retval->data = NULL; retval->next = *lastp; *lastp = retval; entries = 0; /* Recurse to fill the inheritance list of RETVAL. If the DIRLIST is a real list (i.e. DIRLIST_COUNT > 1), the RETVAL entry does not correspond to a real file; retval->filename contains colons. In this case we loop across all elements of DIRLIST and across all bit patterns dominated by MASK. If the DIRLIST is a single directory or entirely redundant (i.e. DIRLIST_COUNT == 1), we loop across all bit patterns dominated by MASK, excluding MASK itself. In either case, we loop down from MASK to 0. This has the effect that the extra bits in the locale name are dropped in this order: first the modifier, then the territory, then the codeset, then the normalized_codeset. */ for (cnt = dirlist_count > 1 ? mask : mask - 1; cnt >= 0; --cnt) if ((cnt & ~mask) == 0 && ((cnt & CEN_SPECIFIC) == 0 || (cnt & XPG_SPECIFIC) == 0) && ((cnt & XPG_CODESET) == 0 || (cnt & XPG_NORM_CODESET) == 0)) { if (dirlist_count > 1) { /* Iterate over all elements of the DIRLIST. */ char *dir = NULL; while ((dir = __argz_next ((char *) dirlist, dirlist_len, dir)) != NULL) retval->successor[entries++] = _nl_make_l10nflist (l10nfile_list, dir, strlen (dir) + 1, cnt, language, territory, codeset, normalized_codeset, modifier, special, sponsor, revision, filename, 1); } else retval->successor[entries++] = _nl_make_l10nflist (l10nfile_list, dirlist, dirlist_len, cnt, language, territory, codeset, normalized_codeset, modifier, special, sponsor, revision, filename, 1); } retval->successor[entries] = NULL; return retval; } /* Normalize codeset name. There is no standard for the codeset names. Normalization allows the user to use any of the common names. The return value is dynamically allocated and has to be freed by the caller. */ const char * _nl_normalize_codeset (codeset, name_len) const char *codeset; size_t name_len; { int len = 0; int only_digit = 1; char *retval; char *wp; size_t cnt; for (cnt = 0; cnt < name_len; ++cnt) if (isalnum ((unsigned char) codeset[cnt])) { ++len; if (isalpha ((unsigned char) codeset[cnt])) only_digit = 0; } retval = (char *) malloc ((only_digit ? 3 : 0) + len + 1); if (retval != NULL) { if (only_digit) wp = stpcpy (retval, "iso"); else wp = retval; for (cnt = 0; cnt < name_len; ++cnt) if (isalpha ((unsigned char) codeset[cnt])) *wp++ = tolower ((unsigned char) codeset[cnt]); else if (isdigit ((unsigned char) codeset[cnt])) *wp++ = codeset[cnt]; *wp = '\0'; } return (const char *) retval; } /* @@ begin of epilog @@ */ /* We don't want libintl.a to depend on any other library. So we avoid the non-standard function stpcpy. In GNU C Library this function is available, though. Also allow the symbol HAVE_STPCPY to be defined. */ #if !_LIBC && !HAVE_STPCPY static char * stpcpy (dest, src) char *dest; const char *src; { while ((*dest++ = *src++) != '\0') /* Do nothing. */ ; return dest - 1; } #endif kasumi-2.5/intl/gettextP.h0000644000175000017500000001524410142036016012514 00000000000000/* Header describing internals of libintl library. Copyright (C) 1995-1999, 2000-2003 Free Software Foundation, Inc. Written by Ulrich Drepper , 1995. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifndef _GETTEXTP_H #define _GETTEXTP_H #include /* Get size_t. */ #ifdef _LIBC # include "../iconv/gconv_int.h" #else # if HAVE_ICONV # include # endif #endif #include "loadinfo.h" #include "gmo.h" /* Get nls_uint32. */ /* @@ end of prolog @@ */ #ifndef PARAMS # if __STDC__ || defined __GNUC__ || defined __SUNPRO_C || defined __cplusplus || __PROTOTYPES # define PARAMS(args) args # else # define PARAMS(args) () # endif #endif #ifndef internal_function # define internal_function #endif #ifndef attribute_hidden # define attribute_hidden #endif /* Tell the compiler when a conditional or integer expression is almost always true or almost always false. */ #ifndef HAVE_BUILTIN_EXPECT # define __builtin_expect(expr, val) (expr) #endif #ifndef W # define W(flag, data) ((flag) ? SWAP (data) : (data)) #endif #ifdef _LIBC # include # define SWAP(i) bswap_32 (i) #else static inline nls_uint32 SWAP (i) nls_uint32 i; { return (i << 24) | ((i & 0xff00) << 8) | ((i >> 8) & 0xff00) | (i >> 24); } #endif /* In-memory representation of system dependent string. */ struct sysdep_string_desc { /* Length of addressed string, including the trailing NUL. */ size_t length; /* Pointer to addressed string. */ const char *pointer; }; /* The representation of an opened message catalog. */ struct loaded_domain { /* Pointer to memory containing the .mo file. */ const char *data; /* 1 if the memory is mmap()ed, 0 if the memory is malloc()ed. */ int use_mmap; /* Size of mmap()ed memory. */ size_t mmap_size; /* 1 if the .mo file uses a different endianness than this machine. */ int must_swap; /* Pointer to additional malloc()ed memory. */ void *malloced; /* Number of static strings pairs. */ nls_uint32 nstrings; /* Pointer to descriptors of original strings in the file. */ const struct string_desc *orig_tab; /* Pointer to descriptors of translated strings in the file. */ const struct string_desc *trans_tab; /* Number of system dependent strings pairs. */ nls_uint32 n_sysdep_strings; /* Pointer to descriptors of original sysdep strings. */ const struct sysdep_string_desc *orig_sysdep_tab; /* Pointer to descriptors of translated sysdep strings. */ const struct sysdep_string_desc *trans_sysdep_tab; /* Size of hash table. */ nls_uint32 hash_size; /* Pointer to hash table. */ const nls_uint32 *hash_tab; /* 1 if the hash table uses a different endianness than this machine. */ int must_swap_hash_tab; int codeset_cntr; #ifdef _LIBC __gconv_t conv; #else # if HAVE_ICONV iconv_t conv; # endif #endif char **conv_tab; struct expression *plural; unsigned long int nplurals; }; /* We want to allocate a string at the end of the struct. But ISO C doesn't allow zero sized arrays. */ #ifdef __GNUC__ # define ZERO 0 #else # define ZERO 1 #endif /* A set of settings bound to a message domain. Used to store settings from bindtextdomain() and bind_textdomain_codeset(). */ struct binding { struct binding *next; char *dirname; int codeset_cntr; /* Incremented each time codeset changes. */ char *codeset; char domainname[ZERO]; }; /* A counter which is incremented each time some previous translations become invalid. This variable is part of the external ABI of the GNU libintl. */ extern int _nl_msg_cat_cntr; #ifndef _LIBC const char *_nl_locale_name PARAMS ((int category, const char *categoryname)); #endif struct loaded_l10nfile *_nl_find_domain PARAMS ((const char *__dirname, char *__locale, const char *__domainname, struct binding *__domainbinding)) internal_function; void _nl_load_domain PARAMS ((struct loaded_l10nfile *__domain, struct binding *__domainbinding)) internal_function; void _nl_unload_domain PARAMS ((struct loaded_domain *__domain)) internal_function; const char *_nl_init_domain_conv PARAMS ((struct loaded_l10nfile *__domain_file, struct loaded_domain *__domain, struct binding *__domainbinding)) internal_function; void _nl_free_domain_conv PARAMS ((struct loaded_domain *__domain)) internal_function; char *_nl_find_msg PARAMS ((struct loaded_l10nfile *domain_file, struct binding *domainbinding, const char *msgid, size_t *lengthp)) internal_function; #ifdef _LIBC extern char *__gettext PARAMS ((const char *__msgid)); extern char *__dgettext PARAMS ((const char *__domainname, const char *__msgid)); extern char *__dcgettext PARAMS ((const char *__domainname, const char *__msgid, int __category)); extern char *__ngettext PARAMS ((const char *__msgid1, const char *__msgid2, unsigned long int __n)); extern char *__dngettext PARAMS ((const char *__domainname, const char *__msgid1, const char *__msgid2, unsigned long int n)); extern char *__dcngettext PARAMS ((const char *__domainname, const char *__msgid1, const char *__msgid2, unsigned long int __n, int __category)); extern char *__dcigettext PARAMS ((const char *__domainname, const char *__msgid1, const char *__msgid2, int __plural, unsigned long int __n, int __category)); extern char *__textdomain PARAMS ((const char *__domainname)); extern char *__bindtextdomain PARAMS ((const char *__domainname, const char *__dirname)); extern char *__bind_textdomain_codeset PARAMS ((const char *__domainname, const char *__codeset)); #else /* Declare the exported libintl_* functions, in a way that allows us to call them under their real name. */ # define _INTL_REDIRECT_MACROS # include "libgnuintl.h" extern char *libintl_dcigettext PARAMS ((const char *__domainname, const char *__msgid1, const char *__msgid2, int __plural, unsigned long int __n, int __category)); #endif /* @@ begin of epilog @@ */ #endif /* gettextP.h */ kasumi-2.5/intl/plural-exp.c0000644000175000017500000000771410142036016012777 00000000000000/* Expression parsing for plural form selection. Copyright (C) 2000, 2001 Free Software Foundation, Inc. Written by Ulrich Drepper , 2000. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifdef HAVE_CONFIG_H # include #endif #include #include #include #include "plural-exp.h" #if (defined __GNUC__ && !defined __APPLE_CC__) \ || (defined __STDC_VERSION__ && __STDC_VERSION__ >= 199901L) /* These structs are the constant expression for the germanic plural form determination. It represents the expression "n != 1". */ static const struct expression plvar = { .nargs = 0, .operation = var, }; static const struct expression plone = { .nargs = 0, .operation = num, .val = { .num = 1 } }; struct expression GERMANIC_PLURAL = { .nargs = 2, .operation = not_equal, .val = { .args = { [0] = (struct expression *) &plvar, [1] = (struct expression *) &plone } } }; # define INIT_GERMANIC_PLURAL() #else /* For compilers without support for ISO C 99 struct/union initializers: Initialization at run-time. */ static struct expression plvar; static struct expression plone; struct expression GERMANIC_PLURAL; static void init_germanic_plural () { if (plone.val.num == 0) { plvar.nargs = 0; plvar.operation = var; plone.nargs = 0; plone.operation = num; plone.val.num = 1; GERMANIC_PLURAL.nargs = 2; GERMANIC_PLURAL.operation = not_equal; GERMANIC_PLURAL.val.args[0] = &plvar; GERMANIC_PLURAL.val.args[1] = &plone; } } # define INIT_GERMANIC_PLURAL() init_germanic_plural () #endif void internal_function EXTRACT_PLURAL_EXPRESSION (nullentry, pluralp, npluralsp) const char *nullentry; struct expression **pluralp; unsigned long int *npluralsp; { if (nullentry != NULL) { const char *plural; const char *nplurals; plural = strstr (nullentry, "plural="); nplurals = strstr (nullentry, "nplurals="); if (plural == NULL || nplurals == NULL) goto no_plural; else { char *endp; unsigned long int n; struct parse_args args; /* First get the number. */ nplurals += 9; while (*nplurals != '\0' && isspace ((unsigned char) *nplurals)) ++nplurals; if (!(*nplurals >= '0' && *nplurals <= '9')) goto no_plural; #if defined HAVE_STRTOUL || defined _LIBC n = strtoul (nplurals, &endp, 10); #else for (endp = nplurals, n = 0; *endp >= '0' && *endp <= '9'; endp++) n = n * 10 + (*endp - '0'); #endif if (nplurals == endp) goto no_plural; *npluralsp = n; /* Due to the restrictions bison imposes onto the interface of the scanner function we have to put the input string and the result passed up from the parser into the same structure which address is passed down to the parser. */ plural += 7; args.cp = plural; if (PLURAL_PARSE (&args) != 0) goto no_plural; *pluralp = args.res; } } else { /* By default we are using the Germanic form: singular form only for `one', the plural form otherwise. Yes, this is also what English is using since English is a Germanic language. */ no_plural: INIT_GERMANIC_PLURAL (); *pluralp = &GERMANIC_PLURAL; *npluralsp = 2; } } kasumi-2.5/intl/localcharset.c0000644000175000017500000002435510142036016013352 00000000000000/* Determine a canonical name for the current locale's character encoding. Copyright (C) 2000-2003 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Written by Bruno Haible . */ #ifdef HAVE_CONFIG_H # include #endif /* Specification. */ #include "localcharset.h" #if HAVE_STDDEF_H # include #endif #include #if HAVE_STRING_H # include #else # include #endif #if HAVE_STDLIB_H # include #endif #if defined _WIN32 || defined __WIN32__ # undef WIN32 /* avoid warning on mingw32 */ # define WIN32 #endif #if defined __EMX__ /* Assume EMX program runs on OS/2, even if compiled under DOS. */ # define OS2 #endif #if !defined WIN32 # if HAVE_LANGINFO_CODESET # include # else # if HAVE_SETLOCALE # include # endif # endif #elif defined WIN32 # define WIN32_LEAN_AND_MEAN # include #endif #if defined OS2 # define INCL_DOS # include #endif #if ENABLE_RELOCATABLE # include "relocatable.h" #else # define relocate(pathname) (pathname) #endif #if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__ /* Win32, OS/2, DOS */ # define ISSLASH(C) ((C) == '/' || (C) == '\\') #endif #ifndef DIRECTORY_SEPARATOR # define DIRECTORY_SEPARATOR '/' #endif #ifndef ISSLASH # define ISSLASH(C) ((C) == DIRECTORY_SEPARATOR) #endif #ifdef HAVE_GETC_UNLOCKED # undef getc # define getc getc_unlocked #endif /* The following static variable is declared 'volatile' to avoid a possible multithread problem in the function get_charset_aliases. If we are running in a threaded environment, and if two threads initialize 'charset_aliases' simultaneously, both will produce the same value, and everything will be ok if the two assignments to 'charset_aliases' are atomic. But I don't know what will happen if the two assignments mix. */ #if __STDC__ != 1 # define volatile /* empty */ #endif /* Pointer to the contents of the charset.alias file, if it has already been read, else NULL. Its format is: ALIAS_1 '\0' CANONICAL_1 '\0' ... ALIAS_n '\0' CANONICAL_n '\0' '\0' */ static const char * volatile charset_aliases; /* Return a pointer to the contents of the charset.alias file. */ static const char * get_charset_aliases () { const char *cp; cp = charset_aliases; if (cp == NULL) { #if !(defined VMS || defined WIN32) FILE *fp; const char *dir = relocate (LIBDIR); const char *base = "charset.alias"; char *file_name; /* Concatenate dir and base into freshly allocated file_name. */ { size_t dir_len = strlen (dir); size_t base_len = strlen (base); int add_slash = (dir_len > 0 && !ISSLASH (dir[dir_len - 1])); file_name = (char *) malloc (dir_len + add_slash + base_len + 1); if (file_name != NULL) { memcpy (file_name, dir, dir_len); if (add_slash) file_name[dir_len] = DIRECTORY_SEPARATOR; memcpy (file_name + dir_len + add_slash, base, base_len + 1); } } if (file_name == NULL || (fp = fopen (file_name, "r")) == NULL) /* Out of memory or file not found, treat it as empty. */ cp = ""; else { /* Parse the file's contents. */ int c; char buf1[50+1]; char buf2[50+1]; char *res_ptr = NULL; size_t res_size = 0; size_t l1, l2; for (;;) { c = getc (fp); if (c == EOF) break; if (c == '\n' || c == ' ' || c == '\t') continue; if (c == '#') { /* Skip comment, to end of line. */ do c = getc (fp); while (!(c == EOF || c == '\n')); if (c == EOF) break; continue; } ungetc (c, fp); if (fscanf (fp, "%50s %50s", buf1, buf2) < 2) break; l1 = strlen (buf1); l2 = strlen (buf2); if (res_size == 0) { res_size = l1 + 1 + l2 + 1; res_ptr = (char *) malloc (res_size + 1); } else { res_size += l1 + 1 + l2 + 1; res_ptr = (char *) realloc (res_ptr, res_size + 1); } if (res_ptr == NULL) { /* Out of memory. */ res_size = 0; break; } strcpy (res_ptr + res_size - (l2 + 1) - (l1 + 1), buf1); strcpy (res_ptr + res_size - (l2 + 1), buf2); } fclose (fp); if (res_size == 0) cp = ""; else { *(res_ptr + res_size) = '\0'; cp = res_ptr; } } if (file_name != NULL) free (file_name); #else # if defined VMS /* To avoid the troubles of an extra file charset.alias_vms in the sources of many GNU packages, simply inline the aliases here. */ /* The list of encodings is taken from the OpenVMS 7.3-1 documentation "Compaq C Run-Time Library Reference Manual for OpenVMS systems" section 10.7 "Handling Different Character Sets". */ cp = "ISO8859-1" "\0" "ISO-8859-1" "\0" "ISO8859-2" "\0" "ISO-8859-2" "\0" "ISO8859-5" "\0" "ISO-8859-5" "\0" "ISO8859-7" "\0" "ISO-8859-7" "\0" "ISO8859-8" "\0" "ISO-8859-8" "\0" "ISO8859-9" "\0" "ISO-8859-9" "\0" /* Japanese */ "eucJP" "\0" "EUC-JP" "\0" "SJIS" "\0" "SHIFT_JIS" "\0" "DECKANJI" "\0" "DEC-KANJI" "\0" "SDECKANJI" "\0" "EUC-JP" "\0" /* Chinese */ "eucTW" "\0" "EUC-TW" "\0" "DECHANYU" "\0" "DEC-HANYU" "\0" "DECHANZI" "\0" "GB2312" "\0" /* Korean */ "DECKOREAN" "\0" "EUC-KR" "\0"; # endif # if defined WIN32 /* To avoid the troubles of installing a separate file in the same directory as the DLL and of retrieving the DLL's directory at runtime, simply inline the aliases here. */ cp = "CP936" "\0" "GBK" "\0" "CP1361" "\0" "JOHAB" "\0" "CP20127" "\0" "ASCII" "\0" "CP20866" "\0" "KOI8-R" "\0" "CP21866" "\0" "KOI8-RU" "\0" "CP28591" "\0" "ISO-8859-1" "\0" "CP28592" "\0" "ISO-8859-2" "\0" "CP28593" "\0" "ISO-8859-3" "\0" "CP28594" "\0" "ISO-8859-4" "\0" "CP28595" "\0" "ISO-8859-5" "\0" "CP28596" "\0" "ISO-8859-6" "\0" "CP28597" "\0" "ISO-8859-7" "\0" "CP28598" "\0" "ISO-8859-8" "\0" "CP28599" "\0" "ISO-8859-9" "\0" "CP28605" "\0" "ISO-8859-15" "\0"; # endif #endif charset_aliases = cp; } return cp; } /* Determine the current locale's character encoding, and canonicalize it into one of the canonical names listed in config.charset. The result must not be freed; it is statically allocated. If the canonical name cannot be determined, the result is a non-canonical name. */ #ifdef STATIC STATIC #endif const char * locale_charset () { const char *codeset; const char *aliases; #if !(defined WIN32 || defined OS2) # if HAVE_LANGINFO_CODESET /* Most systems support nl_langinfo (CODESET) nowadays. */ codeset = nl_langinfo (CODESET); # else /* On old systems which lack it, use setlocale or getenv. */ const char *locale = NULL; /* But most old systems don't have a complete set of locales. Some (like SunOS 4 or DJGPP) have only the C locale. Therefore we don't use setlocale here; it would return "C" when it doesn't support the locale name the user has set. */ # if HAVE_SETLOCALE && 0 locale = setlocale (LC_CTYPE, NULL); # endif if (locale == NULL || locale[0] == '\0') { locale = getenv ("LC_ALL"); if (locale == NULL || locale[0] == '\0') { locale = getenv ("LC_CTYPE"); if (locale == NULL || locale[0] == '\0') locale = getenv ("LANG"); } } /* On some old systems, one used to set locale = "iso8859_1". On others, you set it to "language_COUNTRY.charset". In any case, we resolve it through the charset.alias file. */ codeset = locale; # endif #elif defined WIN32 static char buf[2 + 10 + 1]; /* Woe32 has a function returning the locale's codepage as a number. */ sprintf (buf, "CP%u", GetACP ()); codeset = buf; #elif defined OS2 const char *locale; static char buf[2 + 10 + 1]; ULONG cp[3]; ULONG cplen; /* Allow user to override the codeset, as set in the operating system, with standard language environment variables. */ locale = getenv ("LC_ALL"); if (locale == NULL || locale[0] == '\0') { locale = getenv ("LC_CTYPE"); if (locale == NULL || locale[0] == '\0') locale = getenv ("LANG"); } if (locale != NULL && locale[0] != '\0') { /* If the locale name contains an encoding after the dot, return it. */ const char *dot = strchr (locale, '.'); if (dot != NULL) { const char *modifier; dot++; /* Look for the possible @... trailer and remove it, if any. */ modifier = strchr (dot, '@'); if (modifier == NULL) return dot; if (modifier - dot < sizeof (buf)) { memcpy (buf, dot, modifier - dot); buf [modifier - dot] = '\0'; return buf; } } /* Resolve through the charset.alias file. */ codeset = locale; } else { /* OS/2 has a function returning the locale's codepage as a number. */ if (DosQueryCp (sizeof (cp), cp, &cplen)) codeset = ""; else { sprintf (buf, "CP%u", cp[0]); codeset = buf; } } #endif if (codeset == NULL) /* The canonical name cannot be determined. */ codeset = ""; /* Resolve alias. */ for (aliases = get_charset_aliases (); *aliases != '\0'; aliases += strlen (aliases) + 1, aliases += strlen (aliases) + 1) if (strcmp (codeset, aliases) == 0 || (aliases[0] == '*' && aliases[1] == '\0')) { codeset = aliases + strlen (aliases) + 1; break; } /* Don't return an empty string. GNU libc and GNU libiconv interpret the empty string as denoting "the locale's character encoding", thus GNU libiconv would call this function a second time. */ if (codeset[0] == '\0') codeset = "ASCII"; return codeset; } kasumi-2.5/intl/log.c0000644000175000017500000000543410142036016011464 00000000000000/* Log file output. Copyright (C) 2003 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Written by Bruno Haible . */ #ifdef HAVE_CONFIG_H # include #endif #include #include #include /* Print an ASCII string with quotes and escape sequences where needed. */ static void print_escaped (stream, str) FILE *stream; const char *str; { putc ('"', stream); for (; *str != '\0'; str++) if (*str == '\n') { fputs ("\\n\"", stream); if (str[1] == '\0') return; fputs ("\n\"", stream); } else { if (*str == '"' || *str == '\\') putc ('\\', stream); putc (*str, stream); } putc ('"', stream); } /* Add to the log file an entry denoting a failed translation. */ void _nl_log_untranslated (logfilename, domainname, msgid1, msgid2, plural) const char *logfilename; const char *domainname; const char *msgid1; const char *msgid2; int plural; { static char *last_logfilename = NULL; static FILE *last_logfile = NULL; FILE *logfile; /* Can we reuse the last opened logfile? */ if (last_logfilename == NULL || strcmp (logfilename, last_logfilename) != 0) { /* Close the last used logfile. */ if (last_logfilename != NULL) { if (last_logfile != NULL) { fclose (last_logfile); last_logfile = NULL; } free (last_logfilename); last_logfilename = NULL; } /* Open the logfile. */ last_logfilename = (char *) malloc (strlen (logfilename) + 1); if (last_logfilename == NULL) return; strcpy (last_logfilename, logfilename); last_logfile = fopen (logfilename, "a"); if (last_logfile == NULL) return; } logfile = last_logfile; fprintf (logfile, "domain "); print_escaped (logfile, domainname); fprintf (logfile, "\nmsgid "); print_escaped (logfile, msgid1); if (plural) { fprintf (logfile, "\nmsgid_plural "); print_escaped (logfile, msgid2); fprintf (logfile, "\nmsgstr[0] \"\"\n"); } else fprintf (logfile, "\nmsgstr \"\"\n"); putc ('\n', logfile); } kasumi-2.5/intl/hash-string.h0000644000175000017500000000357410142036016013142 00000000000000/* Description of GNU message catalog format: string hashing function. Copyright (C) 1995, 1997, 1998, 2000, 2001 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* @@ end of prolog @@ */ #ifndef PARAMS # if __STDC__ || defined __GNUC__ || defined __SUNPRO_C || defined __cplusplus || __PROTOTYPES # define PARAMS(Args) Args # else # define PARAMS(Args) () # endif #endif /* We assume to have `unsigned long int' value with at least 32 bits. */ #define HASHWORDBITS 32 /* Defines the so called `hashpjw' function by P.J. Weinberger [see Aho/Sethi/Ullman, COMPILERS: Principles, Techniques and Tools, 1986, 1987 Bell Telephone Laboratories, Inc.] */ static unsigned long int hash_string PARAMS ((const char *__str_param)); static inline unsigned long int hash_string (str_param) const char *str_param; { unsigned long int hval, g; const char *str = str_param; /* Compute the hash value for the given string. */ hval = 0; while (*str != '\0') { hval <<= 4; hval += (unsigned long int) *str++; g = hval & ((unsigned long int) 0xf << (HASHWORDBITS - 4)); if (g != 0) { hval ^= g >> (HASHWORDBITS - 8); hval ^= g; } } return hval; } kasumi-2.5/intl/config.charset0000755000175000017500000003345310142036016013364 00000000000000#! /bin/sh # Output a system dependent table of character encoding aliases. # # Copyright (C) 2000-2003 Free Software Foundation, Inc. # # This program is free software; you can redistribute it and/or modify it # under the terms of the GNU Library General Public License as published # by the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # Library General Public License for more details. # # You should have received a copy of the GNU Library General Public # License along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, # USA. # # The table consists of lines of the form # ALIAS CANONICAL # # ALIAS is the (system dependent) result of "nl_langinfo (CODESET)". # ALIAS is compared in a case sensitive way. # # CANONICAL is the GNU canonical name for this character encoding. # It must be an encoding supported by libiconv. Support by GNU libc is # also desirable. CANONICAL is case insensitive. Usually an upper case # MIME charset name is preferred. # The current list of GNU canonical charset names is as follows. # # name used by which systems a MIME name? # ASCII, ANSI_X3.4-1968 glibc solaris freebsd # ISO-8859-1 glibc aix hpux irix osf solaris freebsd yes # ISO-8859-2 glibc aix hpux irix osf solaris freebsd yes # ISO-8859-3 glibc solaris yes # ISO-8859-4 osf solaris freebsd yes # ISO-8859-5 glibc aix hpux irix osf solaris freebsd yes # ISO-8859-6 glibc aix hpux solaris yes # ISO-8859-7 glibc aix hpux irix osf solaris yes # ISO-8859-8 glibc aix hpux osf solaris yes # ISO-8859-9 glibc aix hpux irix osf solaris yes # ISO-8859-13 glibc # ISO-8859-14 glibc # ISO-8859-15 glibc aix osf solaris freebsd # KOI8-R glibc solaris freebsd yes # KOI8-U glibc freebsd yes # KOI8-T glibc # CP437 dos # CP775 dos # CP850 aix osf dos # CP852 dos # CP855 dos # CP856 aix # CP857 dos # CP861 dos # CP862 dos # CP864 dos # CP865 dos # CP866 freebsd dos # CP869 dos # CP874 woe32 dos # CP922 aix # CP932 aix woe32 dos # CP943 aix # CP949 osf woe32 dos # CP950 woe32 dos # CP1046 aix # CP1124 aix # CP1125 dos # CP1129 aix # CP1250 woe32 # CP1251 glibc solaris woe32 # CP1252 aix woe32 # CP1253 woe32 # CP1254 woe32 # CP1255 glibc woe32 # CP1256 woe32 # CP1257 woe32 # GB2312 glibc aix hpux irix solaris freebsd yes # EUC-JP glibc aix hpux irix osf solaris freebsd yes # EUC-KR glibc aix hpux irix osf solaris freebsd yes # EUC-TW glibc aix hpux irix osf solaris # BIG5 glibc aix hpux osf solaris freebsd yes # BIG5-HKSCS glibc solaris # GBK glibc aix osf solaris woe32 dos # GB18030 glibc solaris # SHIFT_JIS hpux osf solaris freebsd yes # JOHAB glibc solaris woe32 # TIS-620 glibc aix hpux osf solaris # VISCII glibc yes # TCVN5712-1 glibc # GEORGIAN-PS glibc # HP-ROMAN8 hpux # HP-ARABIC8 hpux # HP-GREEK8 hpux # HP-HEBREW8 hpux # HP-TURKISH8 hpux # HP-KANA8 hpux # DEC-KANJI osf # DEC-HANYU osf # UTF-8 glibc aix hpux osf solaris yes # # Note: Names which are not marked as being a MIME name should not be used in # Internet protocols for information interchange (mail, news, etc.). # # Note: ASCII and ANSI_X3.4-1968 are synonymous canonical names. Applications # must understand both names and treat them as equivalent. # # The first argument passed to this file is the canonical host specification, # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM host="$1" os=`echo "$host" | sed -e 's/^[^-]*-[^-]*-\(.*\)$/\1/'` echo "# This file contains a table of character encoding aliases," echo "# suitable for operating system '${os}'." echo "# It was automatically generated from config.charset." # List of references, updated during installation: echo "# Packages using this file: " case "$os" in linux* | *-gnu*) # With glibc-2.1 or newer, we don't need any canonicalization, # because glibc has iconv and both glibc and libiconv support all # GNU canonical names directly. Therefore, the Makefile does not # need to install the alias file at all. # The following applies only to glibc-2.0.x and older libcs. echo "ISO_646.IRV:1983 ASCII" ;; aix*) echo "ISO8859-1 ISO-8859-1" echo "ISO8859-2 ISO-8859-2" echo "ISO8859-5 ISO-8859-5" echo "ISO8859-6 ISO-8859-6" echo "ISO8859-7 ISO-8859-7" echo "ISO8859-8 ISO-8859-8" echo "ISO8859-9 ISO-8859-9" echo "ISO8859-15 ISO-8859-15" echo "IBM-850 CP850" echo "IBM-856 CP856" echo "IBM-921 ISO-8859-13" echo "IBM-922 CP922" echo "IBM-932 CP932" echo "IBM-943 CP943" echo "IBM-1046 CP1046" echo "IBM-1124 CP1124" echo "IBM-1129 CP1129" echo "IBM-1252 CP1252" echo "IBM-eucCN GB2312" echo "IBM-eucJP EUC-JP" echo "IBM-eucKR EUC-KR" echo "IBM-eucTW EUC-TW" echo "big5 BIG5" echo "GBK GBK" echo "TIS-620 TIS-620" echo "UTF-8 UTF-8" ;; hpux*) echo "iso88591 ISO-8859-1" echo "iso88592 ISO-8859-2" echo "iso88595 ISO-8859-5" echo "iso88596 ISO-8859-6" echo "iso88597 ISO-8859-7" echo "iso88598 ISO-8859-8" echo "iso88599 ISO-8859-9" echo "iso885915 ISO-8859-15" echo "roman8 HP-ROMAN8" echo "arabic8 HP-ARABIC8" echo "greek8 HP-GREEK8" echo "hebrew8 HP-HEBREW8" echo "turkish8 HP-TURKISH8" echo "kana8 HP-KANA8" echo "tis620 TIS-620" echo "big5 BIG5" echo "eucJP EUC-JP" echo "eucKR EUC-KR" echo "eucTW EUC-TW" echo "hp15CN GB2312" #echo "ccdc ?" # what is this? echo "SJIS SHIFT_JIS" echo "utf8 UTF-8" ;; irix*) echo "ISO8859-1 ISO-8859-1" echo "ISO8859-2 ISO-8859-2" echo "ISO8859-5 ISO-8859-5" echo "ISO8859-7 ISO-8859-7" echo "ISO8859-9 ISO-8859-9" echo "eucCN GB2312" echo "eucJP EUC-JP" echo "eucKR EUC-KR" echo "eucTW EUC-TW" ;; osf*) echo "ISO8859-1 ISO-8859-1" echo "ISO8859-2 ISO-8859-2" echo "ISO8859-4 ISO-8859-4" echo "ISO8859-5 ISO-8859-5" echo "ISO8859-7 ISO-8859-7" echo "ISO8859-8 ISO-8859-8" echo "ISO8859-9 ISO-8859-9" echo "ISO8859-15 ISO-8859-15" echo "cp850 CP850" echo "big5 BIG5" echo "dechanyu DEC-HANYU" echo "dechanzi GB2312" echo "deckanji DEC-KANJI" echo "deckorean EUC-KR" echo "eucJP EUC-JP" echo "eucKR EUC-KR" echo "eucTW EUC-TW" echo "GBK GBK" echo "KSC5601 CP949" echo "sdeckanji EUC-JP" echo "SJIS SHIFT_JIS" echo "TACTIS TIS-620" echo "UTF-8 UTF-8" ;; solaris*) echo "646 ASCII" echo "ISO8859-1 ISO-8859-1" echo "ISO8859-2 ISO-8859-2" echo "ISO8859-3 ISO-8859-3" echo "ISO8859-4 ISO-8859-4" echo "ISO8859-5 ISO-8859-5" echo "ISO8859-6 ISO-8859-6" echo "ISO8859-7 ISO-8859-7" echo "ISO8859-8 ISO-8859-8" echo "ISO8859-9 ISO-8859-9" echo "ISO8859-15 ISO-8859-15" echo "koi8-r KOI8-R" echo "ansi-1251 CP1251" echo "BIG5 BIG5" echo "Big5-HKSCS BIG5-HKSCS" echo "gb2312 GB2312" echo "GBK GBK" echo "GB18030 GB18030" echo "cns11643 EUC-TW" echo "5601 EUC-KR" echo "ko_KR.johap92 JOHAB" echo "eucJP EUC-JP" echo "PCK SHIFT_JIS" echo "TIS620.2533 TIS-620" #echo "sun_eu_greek ?" # what is this? echo "UTF-8 UTF-8" ;; freebsd* | os2*) # FreeBSD 4.2 doesn't have nl_langinfo(CODESET); therefore # localcharset.c falls back to using the full locale name # from the environment variables. # Likewise for OS/2. OS/2 has XFree86 just like FreeBSD. Just # reuse FreeBSD's locale data for OS/2. echo "C ASCII" echo "US-ASCII ASCII" for l in la_LN lt_LN; do echo "$l.ASCII ASCII" done for l in da_DK de_AT de_CH de_DE en_AU en_CA en_GB en_US es_ES \ fi_FI fr_BE fr_CA fr_CH fr_FR is_IS it_CH it_IT la_LN \ lt_LN nl_BE nl_NL no_NO pt_PT sv_SE; do echo "$l.ISO_8859-1 ISO-8859-1" echo "$l.DIS_8859-15 ISO-8859-15" done for l in cs_CZ hr_HR hu_HU la_LN lt_LN pl_PL sl_SI; do echo "$l.ISO_8859-2 ISO-8859-2" done for l in la_LN lt_LT; do echo "$l.ISO_8859-4 ISO-8859-4" done for l in ru_RU ru_SU; do echo "$l.KOI8-R KOI8-R" echo "$l.ISO_8859-5 ISO-8859-5" echo "$l.CP866 CP866" done echo "uk_UA.KOI8-U KOI8-U" echo "zh_TW.BIG5 BIG5" echo "zh_TW.Big5 BIG5" echo "zh_CN.EUC GB2312" echo "ja_JP.EUC EUC-JP" echo "ja_JP.SJIS SHIFT_JIS" echo "ja_JP.Shift_JIS SHIFT_JIS" echo "ko_KR.EUC EUC-KR" ;; netbsd*) echo "646 ASCII" echo "ISO8859-1 ISO-8859-1" echo "ISO8859-2 ISO-8859-2" echo "ISO8859-4 ISO-8859-4" echo "ISO8859-5 ISO-8859-5" echo "ISO8859-15 ISO-8859-15" echo "eucCN GB2312" echo "eucJP EUC-JP" echo "eucKR EUC-KR" echo "eucTW EUC-TW" echo "BIG5 BIG5" echo "SJIS SHIFT_JIS" ;; beos*) # BeOS has a single locale, and it has UTF-8 encoding. echo "* UTF-8" ;; msdosdjgpp*) # DJGPP 2.03 doesn't have nl_langinfo(CODESET); therefore # localcharset.c falls back to using the full locale name # from the environment variables. echo "#" echo "# The encodings given here may not all be correct." echo "# If you find that the encoding given for your language and" echo "# country is not the one your DOS machine actually uses, just" echo "# correct it in this file, and send a mail to" echo "# Juan Manuel Guerrero " echo "# and Bruno Haible ." echo "#" echo "C ASCII" # ISO-8859-1 languages echo "ca CP850" echo "ca_ES CP850" echo "da CP865" # not CP850 ?? echo "da_DK CP865" # not CP850 ?? echo "de CP850" echo "de_AT CP850" echo "de_CH CP850" echo "de_DE CP850" echo "en CP850" echo "en_AU CP850" # not CP437 ?? echo "en_CA CP850" echo "en_GB CP850" echo "en_NZ CP437" echo "en_US CP437" echo "en_ZA CP850" # not CP437 ?? echo "es CP850" echo "es_AR CP850" echo "es_BO CP850" echo "es_CL CP850" echo "es_CO CP850" echo "es_CR CP850" echo "es_CU CP850" echo "es_DO CP850" echo "es_EC CP850" echo "es_ES CP850" echo "es_GT CP850" echo "es_HN CP850" echo "es_MX CP850" echo "es_NI CP850" echo "es_PA CP850" echo "es_PY CP850" echo "es_PE CP850" echo "es_SV CP850" echo "es_UY CP850" echo "es_VE CP850" echo "et CP850" echo "et_EE CP850" echo "eu CP850" echo "eu_ES CP850" echo "fi CP850" echo "fi_FI CP850" echo "fr CP850" echo "fr_BE CP850" echo "fr_CA CP850" echo "fr_CH CP850" echo "fr_FR CP850" echo "ga CP850" echo "ga_IE CP850" echo "gd CP850" echo "gd_GB CP850" echo "gl CP850" echo "gl_ES CP850" echo "id CP850" # not CP437 ?? echo "id_ID CP850" # not CP437 ?? echo "is CP861" # not CP850 ?? echo "is_IS CP861" # not CP850 ?? echo "it CP850" echo "it_CH CP850" echo "it_IT CP850" echo "lt CP775" echo "lt_LT CP775" echo "lv CP775" echo "lv_LV CP775" echo "nb CP865" # not CP850 ?? echo "nb_NO CP865" # not CP850 ?? echo "nl CP850" echo "nl_BE CP850" echo "nl_NL CP850" echo "nn CP865" # not CP850 ?? echo "nn_NO CP865" # not CP850 ?? echo "no CP865" # not CP850 ?? echo "no_NO CP865" # not CP850 ?? echo "pt CP850" echo "pt_BR CP850" echo "pt_PT CP850" echo "sv CP850" echo "sv_SE CP850" # ISO-8859-2 languages echo "cs CP852" echo "cs_CZ CP852" echo "hr CP852" echo "hr_HR CP852" echo "hu CP852" echo "hu_HU CP852" echo "pl CP852" echo "pl_PL CP852" echo "ro CP852" echo "ro_RO CP852" echo "sk CP852" echo "sk_SK CP852" echo "sl CP852" echo "sl_SI CP852" echo "sq CP852" echo "sq_AL CP852" echo "sr CP852" # CP852 or CP866 or CP855 ?? echo "sr_YU CP852" # CP852 or CP866 or CP855 ?? # ISO-8859-3 languages echo "mt CP850" echo "mt_MT CP850" # ISO-8859-5 languages echo "be CP866" echo "be_BE CP866" echo "bg CP866" # not CP855 ?? echo "bg_BG CP866" # not CP855 ?? echo "mk CP866" # not CP855 ?? echo "mk_MK CP866" # not CP855 ?? echo "ru CP866" echo "ru_RU CP866" echo "uk CP1125" echo "uk_UA CP1125" # ISO-8859-6 languages echo "ar CP864" echo "ar_AE CP864" echo "ar_DZ CP864" echo "ar_EG CP864" echo "ar_IQ CP864" echo "ar_IR CP864" echo "ar_JO CP864" echo "ar_KW CP864" echo "ar_MA CP864" echo "ar_OM CP864" echo "ar_QA CP864" echo "ar_SA CP864" echo "ar_SY CP864" # ISO-8859-7 languages echo "el CP869" echo "el_GR CP869" # ISO-8859-8 languages echo "he CP862" echo "he_IL CP862" # ISO-8859-9 languages echo "tr CP857" echo "tr_TR CP857" # Japanese echo "ja CP932" echo "ja_JP CP932" # Chinese echo "zh_CN GBK" echo "zh_TW CP950" # not CP938 ?? # Korean echo "kr CP949" # not CP934 ?? echo "kr_KR CP949" # not CP934 ?? # Thai echo "th CP874" echo "th_TH CP874" # Other echo "eo CP850" echo "eo_EO CP850" ;; esac kasumi-2.5/intl/dcigettext.c0000644000175000017500000010201410142036016013037 00000000000000/* Implementation of the internal dcigettext function. Copyright (C) 1995-1999, 2000-2003 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Tell glibc's to provide a prototype for mempcpy(). This must come before because may include , and once has been included, it's too late. */ #ifndef _GNU_SOURCE # define _GNU_SOURCE 1 #endif #ifdef HAVE_CONFIG_H # include #endif #include #ifdef __GNUC__ # define alloca __builtin_alloca # define HAVE_ALLOCA 1 #else # ifdef _MSC_VER # include # define alloca _alloca # else # if defined HAVE_ALLOCA_H || defined _LIBC # include # else # ifdef _AIX #pragma alloca # else # ifndef alloca char *alloca (); # endif # endif # endif # endif #endif #include #ifndef errno extern int errno; #endif #ifndef __set_errno # define __set_errno(val) errno = (val) #endif #include #include #include #if defined HAVE_UNISTD_H || defined _LIBC # include #endif #include #ifdef _LIBC /* Guess whether integer division by zero raises signal SIGFPE. Set to 1 only if you know for sure. In case of doubt, set to 0. */ # if defined __alpha__ || defined __arm__ || defined __i386__ \ || defined __m68k__ || defined __s390__ # define INTDIV0_RAISES_SIGFPE 1 # else # define INTDIV0_RAISES_SIGFPE 0 # endif #endif #if !INTDIV0_RAISES_SIGFPE # include #endif #if defined HAVE_SYS_PARAM_H || defined _LIBC # include #endif #include "gettextP.h" #include "plural-exp.h" #ifdef _LIBC # include #else # include "libgnuintl.h" #endif #include "hash-string.h" /* Thread safetyness. */ #ifdef _LIBC # include #else /* Provide dummy implementation if this is outside glibc. */ # define __libc_lock_define_initialized(CLASS, NAME) # define __libc_lock_lock(NAME) # define __libc_lock_unlock(NAME) # define __libc_rwlock_define_initialized(CLASS, NAME) # define __libc_rwlock_rdlock(NAME) # define __libc_rwlock_unlock(NAME) #endif /* Alignment of types. */ #if defined __GNUC__ && __GNUC__ >= 2 # define alignof(TYPE) __alignof__ (TYPE) #else # define alignof(TYPE) \ ((int) &((struct { char dummy1; TYPE dummy2; } *) 0)->dummy2) #endif /* The internal variables in the standalone libintl.a must have different names than the internal variables in GNU libc, otherwise programs using libintl.a cannot be linked statically. */ #if !defined _LIBC # define _nl_default_default_domain libintl_nl_default_default_domain # define _nl_current_default_domain libintl_nl_current_default_domain # define _nl_default_dirname libintl_nl_default_dirname # define _nl_domain_bindings libintl_nl_domain_bindings #endif /* Some compilers, like SunOS4 cc, don't have offsetof in . */ #ifndef offsetof # define offsetof(type,ident) ((size_t)&(((type*)0)->ident)) #endif /* @@ end of prolog @@ */ #ifdef _LIBC /* Rename the non ANSI C functions. This is required by the standard because some ANSI C functions will require linking with this object file and the name space must not be polluted. */ # define getcwd __getcwd # ifndef stpcpy # define stpcpy __stpcpy # endif # define tfind __tfind #else # if !defined HAVE_GETCWD char *getwd (); # define getcwd(buf, max) getwd (buf) # else char *getcwd (); # endif # ifndef HAVE_STPCPY static char *stpcpy PARAMS ((char *dest, const char *src)); # endif # ifndef HAVE_MEMPCPY static void *mempcpy PARAMS ((void *dest, const void *src, size_t n)); # endif #endif /* Amount to increase buffer size by in each try. */ #define PATH_INCR 32 /* The following is from pathmax.h. */ /* Non-POSIX BSD systems might have gcc's limits.h, which doesn't define PATH_MAX but might cause redefinition warnings when sys/param.h is later included (as on MORE/BSD 4.3). */ #if defined _POSIX_VERSION || (defined HAVE_LIMITS_H && !defined __GNUC__) # include #endif #ifndef _POSIX_PATH_MAX # define _POSIX_PATH_MAX 255 #endif #if !defined PATH_MAX && defined _PC_PATH_MAX # define PATH_MAX (pathconf ("/", _PC_PATH_MAX) < 1 ? 1024 : pathconf ("/", _PC_PATH_MAX)) #endif /* Don't include sys/param.h if it already has been. */ #if defined HAVE_SYS_PARAM_H && !defined PATH_MAX && !defined MAXPATHLEN # include #endif #if !defined PATH_MAX && defined MAXPATHLEN # define PATH_MAX MAXPATHLEN #endif #ifndef PATH_MAX # define PATH_MAX _POSIX_PATH_MAX #endif /* Pathname support. ISSLASH(C) tests whether C is a directory separator character. IS_ABSOLUTE_PATH(P) tests whether P is an absolute path. If it is not, it may be concatenated to a directory pathname. IS_PATH_WITH_DIR(P) tests whether P contains a directory specification. */ #if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__ /* Win32, OS/2, DOS */ # define ISSLASH(C) ((C) == '/' || (C) == '\\') # define HAS_DEVICE(P) \ ((((P)[0] >= 'A' && (P)[0] <= 'Z') || ((P)[0] >= 'a' && (P)[0] <= 'z')) \ && (P)[1] == ':') # define IS_ABSOLUTE_PATH(P) (ISSLASH ((P)[0]) || HAS_DEVICE (P)) # define IS_PATH_WITH_DIR(P) \ (strchr (P, '/') != NULL || strchr (P, '\\') != NULL || HAS_DEVICE (P)) #else /* Unix */ # define ISSLASH(C) ((C) == '/') # define IS_ABSOLUTE_PATH(P) ISSLASH ((P)[0]) # define IS_PATH_WITH_DIR(P) (strchr (P, '/') != NULL) #endif /* This is the type used for the search tree where known translations are stored. */ struct known_translation_t { /* Domain in which to search. */ char *domainname; /* The category. */ int category; /* State of the catalog counter at the point the string was found. */ int counter; /* Catalog where the string was found. */ struct loaded_l10nfile *domain; /* And finally the translation. */ const char *translation; size_t translation_length; /* Pointer to the string in question. */ char msgid[ZERO]; }; /* Root of the search tree with known translations. We can use this only if the system provides the `tsearch' function family. */ #if defined HAVE_TSEARCH || defined _LIBC # include static void *root; # ifdef _LIBC # define tsearch __tsearch # endif /* Function to compare two entries in the table of known translations. */ static int transcmp PARAMS ((const void *p1, const void *p2)); static int transcmp (p1, p2) const void *p1; const void *p2; { const struct known_translation_t *s1; const struct known_translation_t *s2; int result; s1 = (const struct known_translation_t *) p1; s2 = (const struct known_translation_t *) p2; result = strcmp (s1->msgid, s2->msgid); if (result == 0) { result = strcmp (s1->domainname, s2->domainname); if (result == 0) /* We compare the category last (though this is the cheapest operation) since it is hopefully always the same (namely LC_MESSAGES). */ result = s1->category - s2->category; } return result; } #endif #ifndef INTVARDEF # define INTVARDEF(name) #endif #ifndef INTUSE # define INTUSE(name) name #endif /* Name of the default domain used for gettext(3) prior any call to textdomain(3). The default value for this is "messages". */ const char _nl_default_default_domain[] attribute_hidden = "messages"; /* Value used as the default domain for gettext(3). */ const char *_nl_current_default_domain attribute_hidden = _nl_default_default_domain; /* Contains the default location of the message catalogs. */ #if defined __EMX__ extern const char _nl_default_dirname[]; #else const char _nl_default_dirname[] = LOCALEDIR; INTVARDEF (_nl_default_dirname) #endif /* List with bindings of specific domains created by bindtextdomain() calls. */ struct binding *_nl_domain_bindings; /* Prototypes for local functions. */ static char *plural_lookup PARAMS ((struct loaded_l10nfile *domain, unsigned long int n, const char *translation, size_t translation_len)) internal_function; static const char *guess_category_value PARAMS ((int category, const char *categoryname)) internal_function; #ifdef _LIBC # include "../locale/localeinfo.h" # define category_to_name(category) _nl_category_names[category] #else static const char *category_to_name PARAMS ((int category)) internal_function; #endif /* For those loosing systems which don't have `alloca' we have to add some additional code emulating it. */ #ifdef HAVE_ALLOCA /* Nothing has to be done. */ # define freea(p) /* nothing */ # define ADD_BLOCK(list, address) /* nothing */ # define FREE_BLOCKS(list) /* nothing */ #else struct block_list { void *address; struct block_list *next; }; # define ADD_BLOCK(list, addr) \ do { \ struct block_list *newp = (struct block_list *) malloc (sizeof (*newp)); \ /* If we cannot get a free block we cannot add the new element to \ the list. */ \ if (newp != NULL) { \ newp->address = (addr); \ newp->next = (list); \ (list) = newp; \ } \ } while (0) # define FREE_BLOCKS(list) \ do { \ while (list != NULL) { \ struct block_list *old = list; \ list = list->next; \ free (old->address); \ free (old); \ } \ } while (0) # undef alloca # define alloca(size) (malloc (size)) # define freea(p) free (p) #endif /* have alloca */ #ifdef _LIBC /* List of blocks allocated for translations. */ typedef struct transmem_list { struct transmem_list *next; char data[ZERO]; } transmem_block_t; static struct transmem_list *transmem_list; #else typedef unsigned char transmem_block_t; #endif /* Names for the libintl functions are a problem. They must not clash with existing names and they should follow ANSI C. But this source code is also used in GNU C Library where the names have a __ prefix. So we have to make a difference here. */ #ifdef _LIBC # define DCIGETTEXT __dcigettext #else # define DCIGETTEXT libintl_dcigettext #endif /* Lock variable to protect the global data in the gettext implementation. */ #ifdef _LIBC __libc_rwlock_define_initialized (, _nl_state_lock attribute_hidden) #endif /* Checking whether the binaries runs SUID must be done and glibc provides easier methods therefore we make a difference here. */ #ifdef _LIBC # define ENABLE_SECURE __libc_enable_secure # define DETERMINE_SECURE #else # ifndef HAVE_GETUID # define getuid() 0 # endif # ifndef HAVE_GETGID # define getgid() 0 # endif # ifndef HAVE_GETEUID # define geteuid() getuid() # endif # ifndef HAVE_GETEGID # define getegid() getgid() # endif static int enable_secure; # define ENABLE_SECURE (enable_secure == 1) # define DETERMINE_SECURE \ if (enable_secure == 0) \ { \ if (getuid () != geteuid () || getgid () != getegid ()) \ enable_secure = 1; \ else \ enable_secure = -1; \ } #endif /* Get the function to evaluate the plural expression. */ #include "eval-plural.h" /* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY locale and, if PLURAL is nonzero, search over string depending on the plural form determined by N. */ char * DCIGETTEXT (domainname, msgid1, msgid2, plural, n, category) const char *domainname; const char *msgid1; const char *msgid2; int plural; unsigned long int n; int category; { #ifndef HAVE_ALLOCA struct block_list *block_list = NULL; #endif struct loaded_l10nfile *domain; struct binding *binding; const char *categoryname; const char *categoryvalue; char *dirname, *xdomainname; char *single_locale; char *retval; size_t retlen; int saved_errno; #if defined HAVE_TSEARCH || defined _LIBC struct known_translation_t *search; struct known_translation_t **foundp = NULL; size_t msgid_len; #endif size_t domainname_len; /* If no real MSGID is given return NULL. */ if (msgid1 == NULL) return NULL; #ifdef _LIBC if (category < 0 || category >= __LC_LAST || category == LC_ALL) /* Bogus. */ return (plural == 0 ? (char *) msgid1 /* Use the Germanic plural rule. */ : n == 1 ? (char *) msgid1 : (char *) msgid2); #endif __libc_rwlock_rdlock (_nl_state_lock); /* If DOMAINNAME is NULL, we are interested in the default domain. If CATEGORY is not LC_MESSAGES this might not make much sense but the definition left this undefined. */ if (domainname == NULL) domainname = _nl_current_default_domain; /* OS/2 specific: backward compatibility with older libintl versions */ #ifdef LC_MESSAGES_COMPAT if (category == LC_MESSAGES_COMPAT) category = LC_MESSAGES; #endif #if defined HAVE_TSEARCH || defined _LIBC msgid_len = strlen (msgid1) + 1; /* Try to find the translation among those which we found at some time. */ search = (struct known_translation_t *) alloca (offsetof (struct known_translation_t, msgid) + msgid_len); memcpy (search->msgid, msgid1, msgid_len); search->domainname = (char *) domainname; search->category = category; foundp = (struct known_translation_t **) tfind (search, &root, transcmp); freea (search); if (foundp != NULL && (*foundp)->counter == _nl_msg_cat_cntr) { /* Now deal with plural. */ if (plural) retval = plural_lookup ((*foundp)->domain, n, (*foundp)->translation, (*foundp)->translation_length); else retval = (char *) (*foundp)->translation; __libc_rwlock_unlock (_nl_state_lock); return retval; } #endif /* Preserve the `errno' value. */ saved_errno = errno; /* See whether this is a SUID binary or not. */ DETERMINE_SECURE; /* First find matching binding. */ for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next) { int compare = strcmp (domainname, binding->domainname); if (compare == 0) /* We found it! */ break; if (compare < 0) { /* It is not in the list. */ binding = NULL; break; } } if (binding == NULL) dirname = (char *) INTUSE(_nl_default_dirname); else if (IS_ABSOLUTE_PATH (binding->dirname)) dirname = binding->dirname; else { /* We have a relative path. Make it absolute now. */ size_t dirname_len = strlen (binding->dirname) + 1; size_t path_max; char *ret; path_max = (unsigned int) PATH_MAX; path_max += 2; /* The getcwd docs say to do this. */ for (;;) { dirname = (char *) alloca (path_max + dirname_len); ADD_BLOCK (block_list, dirname); __set_errno (0); ret = getcwd (dirname, path_max); if (ret != NULL || errno != ERANGE) break; path_max += path_max / 2; path_max += PATH_INCR; } if (ret == NULL) /* We cannot get the current working directory. Don't signal an error but simply return the default string. */ goto return_untranslated; stpcpy (stpcpy (strchr (dirname, '\0'), "/"), binding->dirname); } /* Now determine the symbolic name of CATEGORY and its value. */ categoryname = category_to_name (category); categoryvalue = guess_category_value (category, categoryname); domainname_len = strlen (domainname); xdomainname = (char *) alloca (strlen (categoryname) + domainname_len + 5); ADD_BLOCK (block_list, xdomainname); stpcpy (mempcpy (stpcpy (stpcpy (xdomainname, categoryname), "/"), domainname, domainname_len), ".mo"); /* Creating working area. */ single_locale = (char *) alloca (strlen (categoryvalue) + 1); ADD_BLOCK (block_list, single_locale); /* Search for the given string. This is a loop because we perhaps got an ordered list of languages to consider for the translation. */ while (1) { /* Make CATEGORYVALUE point to the next element of the list. */ while (categoryvalue[0] != '\0' && categoryvalue[0] == ':') ++categoryvalue; if (categoryvalue[0] == '\0') { /* The whole contents of CATEGORYVALUE has been searched but no valid entry has been found. We solve this situation by implicitly appending a "C" entry, i.e. no translation will take place. */ single_locale[0] = 'C'; single_locale[1] = '\0'; } else { char *cp = single_locale; while (categoryvalue[0] != '\0' && categoryvalue[0] != ':') *cp++ = *categoryvalue++; *cp = '\0'; /* When this is a SUID binary we must not allow accessing files outside the dedicated directories. */ if (ENABLE_SECURE && IS_PATH_WITH_DIR (single_locale)) /* Ingore this entry. */ continue; } /* If the current locale value is C (or POSIX) we don't load a domain. Return the MSGID. */ if (strcmp (single_locale, "C") == 0 || strcmp (single_locale, "POSIX") == 0) break; /* Find structure describing the message catalog matching the DOMAINNAME and CATEGORY. */ domain = _nl_find_domain (dirname, single_locale, xdomainname, binding); if (domain != NULL) { retval = _nl_find_msg (domain, binding, msgid1, &retlen); if (retval == NULL) { int cnt; for (cnt = 0; domain->successor[cnt] != NULL; ++cnt) { retval = _nl_find_msg (domain->successor[cnt], binding, msgid1, &retlen); if (retval != NULL) { domain = domain->successor[cnt]; break; } } } if (retval != NULL) { /* Found the translation of MSGID1 in domain DOMAIN: starting at RETVAL, RETLEN bytes. */ FREE_BLOCKS (block_list); #if defined HAVE_TSEARCH || defined _LIBC if (foundp == NULL) { /* Create a new entry and add it to the search tree. */ struct known_translation_t *newp; newp = (struct known_translation_t *) malloc (offsetof (struct known_translation_t, msgid) + msgid_len + domainname_len + 1); if (newp != NULL) { newp->domainname = mempcpy (newp->msgid, msgid1, msgid_len); memcpy (newp->domainname, domainname, domainname_len + 1); newp->category = category; newp->counter = _nl_msg_cat_cntr; newp->domain = domain; newp->translation = retval; newp->translation_length = retlen; /* Insert the entry in the search tree. */ foundp = (struct known_translation_t **) tsearch (newp, &root, transcmp); if (foundp == NULL || __builtin_expect (*foundp != newp, 0)) /* The insert failed. */ free (newp); } } else { /* We can update the existing entry. */ (*foundp)->counter = _nl_msg_cat_cntr; (*foundp)->domain = domain; (*foundp)->translation = retval; (*foundp)->translation_length = retlen; } #endif __set_errno (saved_errno); /* Now deal with plural. */ if (plural) retval = plural_lookup (domain, n, retval, retlen); __libc_rwlock_unlock (_nl_state_lock); return retval; } } } return_untranslated: /* Return the untranslated MSGID. */ FREE_BLOCKS (block_list); __libc_rwlock_unlock (_nl_state_lock); #ifndef _LIBC if (!ENABLE_SECURE) { extern void _nl_log_untranslated PARAMS ((const char *logfilename, const char *domainname, const char *msgid1, const char *msgid2, int plural)); const char *logfilename = getenv ("GETTEXT_LOG_UNTRANSLATED"); if (logfilename != NULL && logfilename[0] != '\0') _nl_log_untranslated (logfilename, domainname, msgid1, msgid2, plural); } #endif __set_errno (saved_errno); return (plural == 0 ? (char *) msgid1 /* Use the Germanic plural rule. */ : n == 1 ? (char *) msgid1 : (char *) msgid2); } char * internal_function _nl_find_msg (domain_file, domainbinding, msgid, lengthp) struct loaded_l10nfile *domain_file; struct binding *domainbinding; const char *msgid; size_t *lengthp; { struct loaded_domain *domain; nls_uint32 nstrings; size_t act; char *result; size_t resultlen; if (domain_file->decided == 0) _nl_load_domain (domain_file, domainbinding); if (domain_file->data == NULL) return NULL; domain = (struct loaded_domain *) domain_file->data; nstrings = domain->nstrings; /* Locate the MSGID and its translation. */ if (domain->hash_tab != NULL) { /* Use the hashing table. */ nls_uint32 len = strlen (msgid); nls_uint32 hash_val = hash_string (msgid); nls_uint32 idx = hash_val % domain->hash_size; nls_uint32 incr = 1 + (hash_val % (domain->hash_size - 2)); while (1) { nls_uint32 nstr = W (domain->must_swap_hash_tab, domain->hash_tab[idx]); if (nstr == 0) /* Hash table entry is empty. */ return NULL; nstr--; /* Compare msgid with the original string at index nstr. We compare the lengths with >=, not ==, because plural entries are represented by strings with an embedded NUL. */ if (nstr < nstrings ? W (domain->must_swap, domain->orig_tab[nstr].length) >= len && (strcmp (msgid, domain->data + W (domain->must_swap, domain->orig_tab[nstr].offset)) == 0) : domain->orig_sysdep_tab[nstr - nstrings].length > len && (strcmp (msgid, domain->orig_sysdep_tab[nstr - nstrings].pointer) == 0)) { act = nstr; goto found; } if (idx >= domain->hash_size - incr) idx -= domain->hash_size - incr; else idx += incr; } /* NOTREACHED */ } else { /* Try the default method: binary search in the sorted array of messages. */ size_t top, bottom; bottom = 0; top = nstrings; while (bottom < top) { int cmp_val; act = (bottom + top) / 2; cmp_val = strcmp (msgid, (domain->data + W (domain->must_swap, domain->orig_tab[act].offset))); if (cmp_val < 0) top = act; else if (cmp_val > 0) bottom = act + 1; else goto found; } /* No translation was found. */ return NULL; } found: /* The translation was found at index ACT. If we have to convert the string to use a different character set, this is the time. */ if (act < nstrings) { result = (char *) (domain->data + W (domain->must_swap, domain->trans_tab[act].offset)); resultlen = W (domain->must_swap, domain->trans_tab[act].length) + 1; } else { result = (char *) domain->trans_sysdep_tab[act - nstrings].pointer; resultlen = domain->trans_sysdep_tab[act - nstrings].length; } #if defined _LIBC || HAVE_ICONV if (domain->codeset_cntr != (domainbinding != NULL ? domainbinding->codeset_cntr : 0)) { /* The domain's codeset has changed through bind_textdomain_codeset() since the message catalog was initialized or last accessed. We have to reinitialize the converter. */ _nl_free_domain_conv (domain); _nl_init_domain_conv (domain_file, domain, domainbinding); } if ( # ifdef _LIBC domain->conv != (__gconv_t) -1 # else # if HAVE_ICONV domain->conv != (iconv_t) -1 # endif # endif ) { /* We are supposed to do a conversion. First allocate an appropriate table with the same structure as the table of translations in the file, where we can put the pointers to the converted strings in. There is a slight complication with plural entries. They are represented by consecutive NUL terminated strings. We handle this case by converting RESULTLEN bytes, including NULs. */ if (domain->conv_tab == NULL && ((domain->conv_tab = (char **) calloc (nstrings + domain->n_sysdep_strings, sizeof (char *))) == NULL)) /* Mark that we didn't succeed allocating a table. */ domain->conv_tab = (char **) -1; if (__builtin_expect (domain->conv_tab == (char **) -1, 0)) /* Nothing we can do, no more memory. */ goto converted; if (domain->conv_tab[act] == NULL) { /* We haven't used this string so far, so it is not translated yet. Do this now. */ /* We use a bit more efficient memory handling. We allocate always larger blocks which get used over time. This is faster than many small allocations. */ __libc_lock_define_initialized (static, lock) # define INITIAL_BLOCK_SIZE 4080 static unsigned char *freemem; static size_t freemem_size; const unsigned char *inbuf; unsigned char *outbuf; int malloc_count; # ifndef _LIBC transmem_block_t *transmem_list = NULL; # endif __libc_lock_lock (lock); inbuf = (const unsigned char *) result; outbuf = freemem + sizeof (size_t); malloc_count = 0; while (1) { transmem_block_t *newmem; # ifdef _LIBC size_t non_reversible; int res; if (freemem_size < sizeof (size_t)) goto resize_freemem; res = __gconv (domain->conv, &inbuf, inbuf + resultlen, &outbuf, outbuf + freemem_size - sizeof (size_t), &non_reversible); if (res == __GCONV_OK || res == __GCONV_EMPTY_INPUT) break; if (res != __GCONV_FULL_OUTPUT) { __libc_lock_unlock (lock); goto converted; } inbuf = result; # else # if HAVE_ICONV const char *inptr = (const char *) inbuf; size_t inleft = resultlen; char *outptr = (char *) outbuf; size_t outleft; if (freemem_size < sizeof (size_t)) goto resize_freemem; outleft = freemem_size - sizeof (size_t); if (iconv (domain->conv, (ICONV_CONST char **) &inptr, &inleft, &outptr, &outleft) != (size_t) (-1)) { outbuf = (unsigned char *) outptr; break; } if (errno != E2BIG) { __libc_lock_unlock (lock); goto converted; } # endif # endif resize_freemem: /* We must allocate a new buffer or resize the old one. */ if (malloc_count > 0) { ++malloc_count; freemem_size = malloc_count * INITIAL_BLOCK_SIZE; newmem = (transmem_block_t *) realloc (transmem_list, freemem_size); # ifdef _LIBC if (newmem != NULL) transmem_list = transmem_list->next; else { struct transmem_list *old = transmem_list; transmem_list = transmem_list->next; free (old); } # endif } else { malloc_count = 1; freemem_size = INITIAL_BLOCK_SIZE; newmem = (transmem_block_t *) malloc (freemem_size); } if (__builtin_expect (newmem == NULL, 0)) { freemem = NULL; freemem_size = 0; __libc_lock_unlock (lock); goto converted; } # ifdef _LIBC /* Add the block to the list of blocks we have to free at some point. */ newmem->next = transmem_list; transmem_list = newmem; freemem = newmem->data; freemem_size -= offsetof (struct transmem_list, data); # else transmem_list = newmem; freemem = newmem; # endif outbuf = freemem + sizeof (size_t); } /* We have now in our buffer a converted string. Put this into the table of conversions. */ *(size_t *) freemem = outbuf - freemem - sizeof (size_t); domain->conv_tab[act] = (char *) freemem; /* Shrink freemem, but keep it aligned. */ freemem_size -= outbuf - freemem; freemem = outbuf; freemem += freemem_size & (alignof (size_t) - 1); freemem_size = freemem_size & ~ (alignof (size_t) - 1); __libc_lock_unlock (lock); } /* Now domain->conv_tab[act] contains the translation of all the plural variants. */ result = domain->conv_tab[act] + sizeof (size_t); resultlen = *(size_t *) domain->conv_tab[act]; } converted: /* The result string is converted. */ #endif /* _LIBC || HAVE_ICONV */ *lengthp = resultlen; return result; } /* Look up a plural variant. */ static char * internal_function plural_lookup (domain, n, translation, translation_len) struct loaded_l10nfile *domain; unsigned long int n; const char *translation; size_t translation_len; { struct loaded_domain *domaindata = (struct loaded_domain *) domain->data; unsigned long int index; const char *p; index = plural_eval (domaindata->plural, n); if (index >= domaindata->nplurals) /* This should never happen. It means the plural expression and the given maximum value do not match. */ index = 0; /* Skip INDEX strings at TRANSLATION. */ p = translation; while (index-- > 0) { #ifdef _LIBC p = __rawmemchr (p, '\0'); #else p = strchr (p, '\0'); #endif /* And skip over the NUL byte. */ p++; if (p >= translation + translation_len) /* This should never happen. It means the plural expression evaluated to a value larger than the number of variants available for MSGID1. */ return (char *) translation; } return (char *) p; } #ifndef _LIBC /* Return string representation of locale CATEGORY. */ static const char * internal_function category_to_name (category) int category; { const char *retval; switch (category) { #ifdef LC_COLLATE case LC_COLLATE: retval = "LC_COLLATE"; break; #endif #ifdef LC_CTYPE case LC_CTYPE: retval = "LC_CTYPE"; break; #endif #ifdef LC_MONETARY case LC_MONETARY: retval = "LC_MONETARY"; break; #endif #ifdef LC_NUMERIC case LC_NUMERIC: retval = "LC_NUMERIC"; break; #endif #ifdef LC_TIME case LC_TIME: retval = "LC_TIME"; break; #endif #ifdef LC_MESSAGES case LC_MESSAGES: retval = "LC_MESSAGES"; break; #endif #ifdef LC_RESPONSE case LC_RESPONSE: retval = "LC_RESPONSE"; break; #endif #ifdef LC_ALL case LC_ALL: /* This might not make sense but is perhaps better than any other value. */ retval = "LC_ALL"; break; #endif default: /* If you have a better idea for a default value let me know. */ retval = "LC_XXX"; } return retval; } #endif /* Guess value of current locale from value of the environment variables. */ static const char * internal_function guess_category_value (category, categoryname) int category; const char *categoryname; { const char *language; const char *retval; /* The highest priority value is the `LANGUAGE' environment variable. But we don't use the value if the currently selected locale is the C locale. This is a GNU extension. */ language = getenv ("LANGUAGE"); if (language != NULL && language[0] == '\0') language = NULL; /* We have to proceed with the POSIX methods of looking to `LC_ALL', `LC_xxx', and `LANG'. On some systems this can be done by the `setlocale' function itself. */ #ifdef _LIBC retval = __current_locale_name (category); #else retval = _nl_locale_name (category, categoryname); #endif /* Ignore LANGUAGE if the locale is set to "C" because 1. "C" locale usually uses the ASCII encoding, and most international messages use non-ASCII characters. These characters get displayed as question marks (if using glibc's iconv()) or as invalid 8-bit characters (because other iconv()s refuse to convert most non-ASCII characters to ASCII). In any case, the output is ugly. 2. The precise output of some programs in the "C" locale is specified by POSIX and should not depend on environment variables like "LANGUAGE". We allow such programs to use gettext(). */ return language != NULL && strcmp (retval, "C") != 0 ? language : retval; } /* @@ begin of epilog @@ */ /* We don't want libintl.a to depend on any other library. So we avoid the non-standard function stpcpy. In GNU C Library this function is available, though. Also allow the symbol HAVE_STPCPY to be defined. */ #if !_LIBC && !HAVE_STPCPY static char * stpcpy (dest, src) char *dest; const char *src; { while ((*dest++ = *src++) != '\0') /* Do nothing. */ ; return dest - 1; } #endif #if !_LIBC && !HAVE_MEMPCPY static void * mempcpy (dest, src, n) void *dest; const void *src; size_t n; { return (void *) ((char *) memcpy (dest, src, n) + n); } #endif #ifdef _LIBC /* If we want to free all resources we have to do some work at program's end. */ libc_freeres_fn (free_mem) { void *old; while (_nl_domain_bindings != NULL) { struct binding *oldp = _nl_domain_bindings; _nl_domain_bindings = _nl_domain_bindings->next; if (oldp->dirname != INTUSE(_nl_default_dirname)) /* Yes, this is a pointer comparison. */ free (oldp->dirname); free (oldp->codeset); free (oldp); } if (_nl_current_default_domain != _nl_default_default_domain) /* Yes, again a pointer comparison. */ free ((char *) _nl_current_default_domain); /* Remove the search tree with the known translations. */ __tdestroy (root, free); root = NULL; while (transmem_list != NULL) { old = transmem_list; transmem_list = transmem_list->next; free (old); } } #endif kasumi-2.5/intl/textdomain.c0000644000175000017500000001071010142036016013050 00000000000000/* Implementation of the textdomain(3) function. Copyright (C) 1995-1998, 2000, 2001, 2002 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifdef HAVE_CONFIG_H # include #endif #include #include #ifdef _LIBC # include #else # include "libgnuintl.h" #endif #include "gettextP.h" #ifdef _LIBC /* We have to handle multi-threaded applications. */ # include #else /* Provide dummy implementation if this is outside glibc. */ # define __libc_rwlock_define(CLASS, NAME) # define __libc_rwlock_wrlock(NAME) # define __libc_rwlock_unlock(NAME) #endif /* The internal variables in the standalone libintl.a must have different names than the internal variables in GNU libc, otherwise programs using libintl.a cannot be linked statically. */ #if !defined _LIBC # define _nl_default_default_domain libintl_nl_default_default_domain # define _nl_current_default_domain libintl_nl_current_default_domain #endif /* @@ end of prolog @@ */ /* Name of the default text domain. */ extern const char _nl_default_default_domain[] attribute_hidden; /* Default text domain in which entries for gettext(3) are to be found. */ extern const char *_nl_current_default_domain attribute_hidden; /* Names for the libintl functions are a problem. They must not clash with existing names and they should follow ANSI C. But this source code is also used in GNU C Library where the names have a __ prefix. So we have to make a difference here. */ #ifdef _LIBC # define TEXTDOMAIN __textdomain # ifndef strdup # define strdup(str) __strdup (str) # endif #else # define TEXTDOMAIN libintl_textdomain #endif /* Lock variable to protect the global data in the gettext implementation. */ __libc_rwlock_define (extern, _nl_state_lock attribute_hidden) /* Set the current default message catalog to DOMAINNAME. If DOMAINNAME is null, return the current default. If DOMAINNAME is "", reset to the default of "messages". */ char * TEXTDOMAIN (domainname) const char *domainname; { char *new_domain; char *old_domain; /* A NULL pointer requests the current setting. */ if (domainname == NULL) return (char *) _nl_current_default_domain; __libc_rwlock_wrlock (_nl_state_lock); old_domain = (char *) _nl_current_default_domain; /* If domain name is the null string set to default domain "messages". */ if (domainname[0] == '\0' || strcmp (domainname, _nl_default_default_domain) == 0) { _nl_current_default_domain = _nl_default_default_domain; new_domain = (char *) _nl_current_default_domain; } else if (strcmp (domainname, old_domain) == 0) /* This can happen and people will use it to signal that some environment variable changed. */ new_domain = old_domain; else { /* If the following malloc fails `_nl_current_default_domain' will be NULL. This value will be returned and so signals we are out of core. */ #if defined _LIBC || defined HAVE_STRDUP new_domain = strdup (domainname); #else size_t len = strlen (domainname) + 1; new_domain = (char *) malloc (len); if (new_domain != NULL) memcpy (new_domain, domainname, len); #endif if (new_domain != NULL) _nl_current_default_domain = new_domain; } /* We use this possibility to signal a change of the loaded catalogs since this is most likely the case and there is no other easy we to do it. Do it only when the call was successful. */ if (new_domain != NULL) { ++_nl_msg_cat_cntr; if (old_domain != new_domain && old_domain != _nl_default_default_domain) free (old_domain); } __libc_rwlock_unlock (_nl_state_lock); return new_domain; } #ifdef _LIBC /* Alias for function name in GNU C Library. */ weak_alias (__textdomain, textdomain); #endif kasumi-2.5/intl/dngettext.c0000644000175000017500000000362710142036016012713 00000000000000/* Implementation of the dngettext(3) function. Copyright (C) 1995-1997, 2000, 2001, 2002 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifdef HAVE_CONFIG_H # include #endif #include #include "gettextP.h" #ifdef _LIBC # include #else # include "libgnuintl.h" #endif /* @@ end of prolog @@ */ /* Names for the libintl functions are a problem. They must not clash with existing names and they should follow ANSI C. But this source code is also used in GNU C Library where the names have a __ prefix. So we have to make a difference here. */ #ifdef _LIBC # define DNGETTEXT __dngettext # define DCNGETTEXT __dcngettext #else # define DNGETTEXT libintl_dngettext # define DCNGETTEXT libintl_dcngettext #endif /* Look up MSGID in the DOMAINNAME message catalog of the current LC_MESSAGES locale and skip message according to the plural form. */ char * DNGETTEXT (domainname, msgid1, msgid2, n) const char *domainname; const char *msgid1; const char *msgid2; unsigned long int n; { return DCNGETTEXT (domainname, msgid1, msgid2, n, LC_MESSAGES); } #ifdef _LIBC /* Alias for function name in GNU C Library. */ weak_alias (__dngettext, dngettext); #endif kasumi-2.5/intl/dcgettext.c0000644000175000017500000000350010142036016012666 00000000000000/* Implementation of the dcgettext(3) function. Copyright (C) 1995-1999, 2000, 2001, 2002 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifdef HAVE_CONFIG_H # include #endif #include "gettextP.h" #ifdef _LIBC # include #else # include "libgnuintl.h" #endif /* @@ end of prolog @@ */ /* Names for the libintl functions are a problem. They must not clash with existing names and they should follow ANSI C. But this source code is also used in GNU C Library where the names have a __ prefix. So we have to make a difference here. */ #ifdef _LIBC # define DCGETTEXT __dcgettext # define DCIGETTEXT __dcigettext #else # define DCGETTEXT libintl_dcgettext # define DCIGETTEXT libintl_dcigettext #endif /* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY locale. */ char * DCGETTEXT (domainname, msgid, category) const char *domainname; const char *msgid; int category; { return DCIGETTEXT (domainname, msgid, NULL, 0, 0, category); } #ifdef _LIBC /* Alias for function name in GNU C Library. */ INTDEF(__dcgettext) weak_alias (__dcgettext, dcgettext); #endif kasumi-2.5/intl/loadinfo.h0000644000175000017500000001373710142036016012510 00000000000000/* Copyright (C) 1996-1999, 2000-2002 Free Software Foundation, Inc. This file is part of the GNU C Library. Contributed by Ulrich Drepper , 1996. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifndef _LOADINFO_H #define _LOADINFO_H 1 /* Declarations of locale dependent catalog lookup functions. Implemented in localealias.c Possibly replace a locale name by another. explodename.c Split a locale name into its various fields. l10nflist.c Generate a list of filenames of possible message catalogs. finddomain.c Find and open the relevant message catalogs. The main function _nl_find_domain() in finddomain.c is declared in gettextP.h. */ #ifndef PARAMS # if __STDC__ || defined __GNUC__ || defined __SUNPRO_C || defined __cplusplus || __PROTOTYPES # define PARAMS(args) args # else # define PARAMS(args) () # endif #endif #ifndef internal_function # define internal_function #endif /* Tell the compiler when a conditional or integer expression is almost always true or almost always false. */ #ifndef HAVE_BUILTIN_EXPECT # define __builtin_expect(expr, val) (expr) #endif /* Separator in PATH like lists of pathnames. */ #if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__ /* Win32, OS/2, DOS */ # define PATH_SEPARATOR ';' #else /* Unix */ # define PATH_SEPARATOR ':' #endif /* Encoding of locale name parts. */ #define CEN_REVISION 1 #define CEN_SPONSOR 2 #define CEN_SPECIAL 4 #define XPG_NORM_CODESET 8 #define XPG_CODESET 16 #define TERRITORY 32 #define CEN_AUDIENCE 64 #define XPG_MODIFIER 128 #define CEN_SPECIFIC (CEN_REVISION|CEN_SPONSOR|CEN_SPECIAL|CEN_AUDIENCE) #define XPG_SPECIFIC (XPG_CODESET|XPG_NORM_CODESET|XPG_MODIFIER) struct loaded_l10nfile { const char *filename; int decided; const void *data; struct loaded_l10nfile *next; struct loaded_l10nfile *successor[1]; }; /* Normalize codeset name. There is no standard for the codeset names. Normalization allows the user to use any of the common names. The return value is dynamically allocated and has to be freed by the caller. */ extern const char *_nl_normalize_codeset PARAMS ((const char *codeset, size_t name_len)); /* Lookup a locale dependent file. *L10NFILE_LIST denotes a pool of lookup results of locale dependent files of the same kind, sorted in decreasing order of ->filename. DIRLIST and DIRLIST_LEN are an argz list of directories in which to look, containing at least one directory (i.e. DIRLIST_LEN > 0). MASK, LANGUAGE, TERRITORY, CODESET, NORMALIZED_CODESET, MODIFIER, SPECIAL, SPONSOR, REVISION are the pieces of the locale name, as produced by _nl_explode_name(). FILENAME is the filename suffix. The return value is the lookup result, either found in *L10NFILE_LIST, or - if DO_ALLOCATE is nonzero - freshly allocated, or possibly NULL. If the return value is non-NULL, it is added to *L10NFILE_LIST, and its ->next field denotes the chaining inside *L10NFILE_LIST, and furthermore its ->successor[] field contains a list of other lookup results from which this lookup result inherits. */ extern struct loaded_l10nfile * _nl_make_l10nflist PARAMS ((struct loaded_l10nfile **l10nfile_list, const char *dirlist, size_t dirlist_len, int mask, const char *language, const char *territory, const char *codeset, const char *normalized_codeset, const char *modifier, const char *special, const char *sponsor, const char *revision, const char *filename, int do_allocate)); /* Lookup the real locale name for a locale alias NAME, or NULL if NAME is not a locale alias (but possibly a real locale name). The return value is statically allocated and must not be freed. */ extern const char *_nl_expand_alias PARAMS ((const char *name)); /* Split a locale name NAME into its pieces: language, modifier, territory, codeset, special, sponsor, revision. NAME gets destructively modified: NUL bytes are inserted here and there. *LANGUAGE gets assigned NAME. Each of *MODIFIER, *TERRITORY, *CODESET, *SPECIAL, *SPONSOR, *REVISION gets assigned either a pointer into the old NAME string, or NULL. *NORMALIZED_CODESET gets assigned the expanded *CODESET, if it is different from *CODESET; this one is dynamically allocated and has to be freed by the caller. The return value is a bitmask, where each bit corresponds to one filled-in value: XPG_MODIFIER, CEN_AUDIENCE for *MODIFIER, TERRITORY for *TERRITORY, XPG_CODESET for *CODESET, XPG_NORM_CODESET for *NORMALIZED_CODESET, CEN_SPECIAL for *SPECIAL, CEN_SPONSOR for *SPONSOR, CEN_REVISION for *REVISION. */ extern int _nl_explode_name PARAMS ((char *name, const char **language, const char **modifier, const char **territory, const char **codeset, const char **normalized_codeset, const char **special, const char **sponsor, const char **revision)); /* Split a locale name NAME into a leading language part and all the rest. Return a pointer to the first character after the language, i.e. to the first byte of the rest. */ extern char *_nl_find_language PARAMS ((const char *name)); #endif /* loadinfo.h */ kasumi-2.5/intl/bindtextdom.c0000644000175000017500000002354010142036016013222 00000000000000/* Implementation of the bindtextdomain(3) function Copyright (C) 1995-1998, 2000, 2001, 2002 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifdef HAVE_CONFIG_H # include #endif #include #include #include #ifdef _LIBC # include #else # include "libgnuintl.h" #endif #include "gettextP.h" #ifdef _LIBC /* We have to handle multi-threaded applications. */ # include #else /* Provide dummy implementation if this is outside glibc. */ # define __libc_rwlock_define(CLASS, NAME) # define __libc_rwlock_wrlock(NAME) # define __libc_rwlock_unlock(NAME) #endif /* The internal variables in the standalone libintl.a must have different names than the internal variables in GNU libc, otherwise programs using libintl.a cannot be linked statically. */ #if !defined _LIBC # define _nl_default_dirname libintl_nl_default_dirname # define _nl_domain_bindings libintl_nl_domain_bindings #endif /* Some compilers, like SunOS4 cc, don't have offsetof in . */ #ifndef offsetof # define offsetof(type,ident) ((size_t)&(((type*)0)->ident)) #endif /* @@ end of prolog @@ */ /* Contains the default location of the message catalogs. */ extern const char _nl_default_dirname[]; #ifdef _LIBC extern const char _nl_default_dirname_internal[] attribute_hidden; #else # define INTUSE(name) name #endif /* List with bindings of specific domains. */ extern struct binding *_nl_domain_bindings; /* Lock variable to protect the global data in the gettext implementation. */ __libc_rwlock_define (extern, _nl_state_lock attribute_hidden) /* Names for the libintl functions are a problem. They must not clash with existing names and they should follow ANSI C. But this source code is also used in GNU C Library where the names have a __ prefix. So we have to make a difference here. */ #ifdef _LIBC # define BINDTEXTDOMAIN __bindtextdomain # define BIND_TEXTDOMAIN_CODESET __bind_textdomain_codeset # ifndef strdup # define strdup(str) __strdup (str) # endif #else # define BINDTEXTDOMAIN libintl_bindtextdomain # define BIND_TEXTDOMAIN_CODESET libintl_bind_textdomain_codeset #endif /* Prototypes for local functions. */ static void set_binding_values PARAMS ((const char *domainname, const char **dirnamep, const char **codesetp)); /* Specifies the directory name *DIRNAMEP and the output codeset *CODESETP to be used for the DOMAINNAME message catalog. If *DIRNAMEP or *CODESETP is NULL, the corresponding attribute is not modified, only the current value is returned. If DIRNAMEP or CODESETP is NULL, the corresponding attribute is neither modified nor returned. */ static void set_binding_values (domainname, dirnamep, codesetp) const char *domainname; const char **dirnamep; const char **codesetp; { struct binding *binding; int modified; /* Some sanity checks. */ if (domainname == NULL || domainname[0] == '\0') { if (dirnamep) *dirnamep = NULL; if (codesetp) *codesetp = NULL; return; } __libc_rwlock_wrlock (_nl_state_lock); modified = 0; for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next) { int compare = strcmp (domainname, binding->domainname); if (compare == 0) /* We found it! */ break; if (compare < 0) { /* It is not in the list. */ binding = NULL; break; } } if (binding != NULL) { if (dirnamep) { const char *dirname = *dirnamep; if (dirname == NULL) /* The current binding has be to returned. */ *dirnamep = binding->dirname; else { /* The domain is already bound. If the new value and the old one are equal we simply do nothing. Otherwise replace the old binding. */ char *result = binding->dirname; if (strcmp (dirname, result) != 0) { if (strcmp (dirname, INTUSE(_nl_default_dirname)) == 0) result = (char *) INTUSE(_nl_default_dirname); else { #if defined _LIBC || defined HAVE_STRDUP result = strdup (dirname); #else size_t len = strlen (dirname) + 1; result = (char *) malloc (len); if (__builtin_expect (result != NULL, 1)) memcpy (result, dirname, len); #endif } if (__builtin_expect (result != NULL, 1)) { if (binding->dirname != INTUSE(_nl_default_dirname)) free (binding->dirname); binding->dirname = result; modified = 1; } } *dirnamep = result; } } if (codesetp) { const char *codeset = *codesetp; if (codeset == NULL) /* The current binding has be to returned. */ *codesetp = binding->codeset; else { /* The domain is already bound. If the new value and the old one are equal we simply do nothing. Otherwise replace the old binding. */ char *result = binding->codeset; if (result == NULL || strcmp (codeset, result) != 0) { #if defined _LIBC || defined HAVE_STRDUP result = strdup (codeset); #else size_t len = strlen (codeset) + 1; result = (char *) malloc (len); if (__builtin_expect (result != NULL, 1)) memcpy (result, codeset, len); #endif if (__builtin_expect (result != NULL, 1)) { if (binding->codeset != NULL) free (binding->codeset); binding->codeset = result; binding->codeset_cntr++; modified = 1; } } *codesetp = result; } } } else if ((dirnamep == NULL || *dirnamep == NULL) && (codesetp == NULL || *codesetp == NULL)) { /* Simply return the default values. */ if (dirnamep) *dirnamep = INTUSE(_nl_default_dirname); if (codesetp) *codesetp = NULL; } else { /* We have to create a new binding. */ size_t len = strlen (domainname) + 1; struct binding *new_binding = (struct binding *) malloc (offsetof (struct binding, domainname) + len); if (__builtin_expect (new_binding == NULL, 0)) goto failed; memcpy (new_binding->domainname, domainname, len); if (dirnamep) { const char *dirname = *dirnamep; if (dirname == NULL) /* The default value. */ dirname = INTUSE(_nl_default_dirname); else { if (strcmp (dirname, INTUSE(_nl_default_dirname)) == 0) dirname = INTUSE(_nl_default_dirname); else { char *result; #if defined _LIBC || defined HAVE_STRDUP result = strdup (dirname); if (__builtin_expect (result == NULL, 0)) goto failed_dirname; #else size_t len = strlen (dirname) + 1; result = (char *) malloc (len); if (__builtin_expect (result == NULL, 0)) goto failed_dirname; memcpy (result, dirname, len); #endif dirname = result; } } *dirnamep = dirname; new_binding->dirname = (char *) dirname; } else /* The default value. */ new_binding->dirname = (char *) INTUSE(_nl_default_dirname); new_binding->codeset_cntr = 0; if (codesetp) { const char *codeset = *codesetp; if (codeset != NULL) { char *result; #if defined _LIBC || defined HAVE_STRDUP result = strdup (codeset); if (__builtin_expect (result == NULL, 0)) goto failed_codeset; #else size_t len = strlen (codeset) + 1; result = (char *) malloc (len); if (__builtin_expect (result == NULL, 0)) goto failed_codeset; memcpy (result, codeset, len); #endif codeset = result; new_binding->codeset_cntr++; } *codesetp = codeset; new_binding->codeset = (char *) codeset; } else new_binding->codeset = NULL; /* Now enqueue it. */ if (_nl_domain_bindings == NULL || strcmp (domainname, _nl_domain_bindings->domainname) < 0) { new_binding->next = _nl_domain_bindings; _nl_domain_bindings = new_binding; } else { binding = _nl_domain_bindings; while (binding->next != NULL && strcmp (domainname, binding->next->domainname) > 0) binding = binding->next; new_binding->next = binding->next; binding->next = new_binding; } modified = 1; /* Here we deal with memory allocation failures. */ if (0) { failed_codeset: if (new_binding->dirname != INTUSE(_nl_default_dirname)) free (new_binding->dirname); failed_dirname: free (new_binding); failed: if (dirnamep) *dirnamep = NULL; if (codesetp) *codesetp = NULL; } } /* If we modified any binding, we flush the caches. */ if (modified) ++_nl_msg_cat_cntr; __libc_rwlock_unlock (_nl_state_lock); } /* Specify that the DOMAINNAME message catalog will be found in DIRNAME rather than in the system locale data base. */ char * BINDTEXTDOMAIN (domainname, dirname) const char *domainname; const char *dirname; { set_binding_values (domainname, &dirname, NULL); return (char *) dirname; } /* Specify the character encoding in which the messages from the DOMAINNAME message catalog will be returned. */ char * BIND_TEXTDOMAIN_CODESET (domainname, codeset) const char *domainname; const char *codeset; { set_binding_values (domainname, NULL, &codeset); return (char *) codeset; } #ifdef _LIBC /* Aliases for function names in GNU C Library. */ weak_alias (__bindtextdomain, bindtextdomain); weak_alias (__bind_textdomain_codeset, bind_textdomain_codeset); #endif kasumi-2.5/intl/ngettext.c0000644000175000017500000000374110142036016012544 00000000000000/* Implementation of ngettext(3) function. Copyright (C) 1995, 1997, 2000, 2001, 2002 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifdef HAVE_CONFIG_H # include #endif #ifdef _LIBC # define __need_NULL # include #else # include /* Just for NULL. */ #endif #include "gettextP.h" #ifdef _LIBC # include #else # include "libgnuintl.h" #endif #include /* @@ end of prolog @@ */ /* Names for the libintl functions are a problem. They must not clash with existing names and they should follow ANSI C. But this source code is also used in GNU C Library where the names have a __ prefix. So we have to make a difference here. */ #ifdef _LIBC # define NGETTEXT __ngettext # define DCNGETTEXT __dcngettext #else # define NGETTEXT libintl_ngettext # define DCNGETTEXT libintl_dcngettext #endif /* Look up MSGID in the current default message catalog for the current LC_MESSAGES locale. If not found, returns MSGID itself (the default text). */ char * NGETTEXT (msgid1, msgid2, n) const char *msgid1; const char *msgid2; unsigned long int n; { return DCNGETTEXT (NULL, msgid1, msgid2, n, LC_MESSAGES); } #ifdef _LIBC /* Alias for function name in GNU C Library. */ weak_alias (__ngettext, ngettext); #endif kasumi-2.5/intl/ChangeLog0000644000175000017500000000011110142036015012273 000000000000002003-05-22 GNU * Version 0.12.1 released. kasumi-2.5/intl/Makefile.in0000644000175000017500000003626310142036015012607 00000000000000# Makefile for directory with message catalog handling library of GNU gettext # Copyright (C) 1995-1998, 2000-2003 Free Software Foundation, Inc. # # This program is free software; you can redistribute it and/or modify it # under the terms of the GNU Library General Public License as published # by the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # Library General Public License for more details. # # You should have received a copy of the GNU Library General Public # License along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, # USA. PACKAGE = @PACKAGE@ VERSION = @VERSION@ SHELL = /bin/sh srcdir = @srcdir@ top_srcdir = @top_srcdir@ top_builddir = .. VPATH = $(srcdir) prefix = @prefix@ exec_prefix = @exec_prefix@ transform = @program_transform_name@ libdir = @libdir@ includedir = @includedir@ datadir = @datadir@ localedir = $(datadir)/locale gettextsrcdir = $(datadir)/gettext/intl aliaspath = $(localedir) subdir = intl INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ MKINSTALLDIRS = @MKINSTALLDIRS@ mkinstalldirs = $(SHELL) $(MKINSTALLDIRS) l = @INTL_LIBTOOL_SUFFIX_PREFIX@ AR = ar CC = @CC@ LIBTOOL = @LIBTOOL@ RANLIB = @RANLIB@ YACC = @INTLBISON@ -y -d YFLAGS = --name-prefix=__gettext DEFS = -DLOCALEDIR=\"$(localedir)\" -DLOCALE_ALIAS_PATH=\"$(aliaspath)\" \ -DLIBDIR=\"$(libdir)\" -DIN_LIBINTL \ -DENABLE_RELOCATABLE=1 -DIN_LIBRARY -DINSTALLDIR=\"$(libdir)\" -DNO_XMALLOC \ -Dset_relocation_prefix=libintl_set_relocation_prefix \ -Drelocate=libintl_relocate \ -DDEPENDS_ON_LIBICONV=1 @DEFS@ CPPFLAGS = @CPPFLAGS@ CFLAGS = @CFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ COMPILE = $(CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS) HEADERS = \ gmo.h \ gettextP.h \ hash-string.h \ loadinfo.h \ plural-exp.h \ eval-plural.h \ localcharset.h \ relocatable.h \ os2compat.h \ libgnuintl.h.in SOURCES = \ bindtextdom.c \ dcgettext.c \ dgettext.c \ gettext.c \ finddomain.c \ loadmsgcat.c \ localealias.c \ textdomain.c \ l10nflist.c \ explodename.c \ dcigettext.c \ dcngettext.c \ dngettext.c \ ngettext.c \ plural.y \ plural-exp.c \ localcharset.c \ relocatable.c \ localename.c \ log.c \ osdep.c \ os2compat.c \ intl-compat.c OBJECTS = \ bindtextdom.$lo \ dcgettext.$lo \ dgettext.$lo \ gettext.$lo \ finddomain.$lo \ loadmsgcat.$lo \ localealias.$lo \ textdomain.$lo \ l10nflist.$lo \ explodename.$lo \ dcigettext.$lo \ dcngettext.$lo \ dngettext.$lo \ ngettext.$lo \ plural.$lo \ plural-exp.$lo \ localcharset.$lo \ relocatable.$lo \ localename.$lo \ log.$lo \ osdep.$lo \ intl-compat.$lo DISTFILES.common = Makefile.in \ config.charset locale.alias ref-add.sin ref-del.sin $(HEADERS) $(SOURCES) DISTFILES.generated = plural.c DISTFILES.normal = VERSION DISTFILES.gettext = COPYING.LIB-2.0 COPYING.LIB-2.1 libintl.glibc \ Makefile.vms libgnuintl.h.msvc-shared README.woe32 Makefile.msvc DISTFILES.obsolete = xopen-msg.sed linux-msg.sed po2tbl.sed.in cat-compat.c \ COPYING.LIB-2 gettext.h libgettext.h plural-eval.c libgnuintl.h all: all-@USE_INCLUDED_LIBINTL@ all-yes: libintl.$la libintl.h charset.alias ref-add.sed ref-del.sed all-no: all-no-@BUILD_INCLUDED_LIBINTL@ all-no-yes: libgnuintl.$la all-no-no: libintl.a libgnuintl.a: $(OBJECTS) rm -f $@ $(AR) cru $@ $(OBJECTS) $(RANLIB) $@ libintl.la libgnuintl.la: $(OBJECTS) $(LIBTOOL) --mode=link \ $(CC) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS) $(LDFLAGS) -o $@ \ $(OBJECTS) @LTLIBICONV@ $(LIBS) -lc \ -version-info $(LTV_CURRENT):$(LTV_REVISION):$(LTV_AGE) \ -rpath $(libdir) \ -no-undefined # Libtool's library version information for libintl. # Before making a gettext release, the gettext maintainer must change this # according to the libtool documentation, section "Library interface versions". # Maintainers of other packages that include the intl directory must *not* # change these values. LTV_CURRENT=5 LTV_REVISION=0 LTV_AGE=3 .SUFFIXES: .SUFFIXES: .c .y .o .lo .sin .sed .c.o: $(COMPILE) $< .y.c: $(YACC) $(YFLAGS) --output $@ $< rm -f $*.h bindtextdom.lo: $(srcdir)/bindtextdom.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/bindtextdom.c dcgettext.lo: $(srcdir)/dcgettext.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/dcgettext.c dgettext.lo: $(srcdir)/dgettext.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/dgettext.c gettext.lo: $(srcdir)/gettext.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/gettext.c finddomain.lo: $(srcdir)/finddomain.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/finddomain.c loadmsgcat.lo: $(srcdir)/loadmsgcat.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/loadmsgcat.c localealias.lo: $(srcdir)/localealias.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/localealias.c textdomain.lo: $(srcdir)/textdomain.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/textdomain.c l10nflist.lo: $(srcdir)/l10nflist.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/l10nflist.c explodename.lo: $(srcdir)/explodename.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/explodename.c dcigettext.lo: $(srcdir)/dcigettext.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/dcigettext.c dcngettext.lo: $(srcdir)/dcngettext.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/dcngettext.c dngettext.lo: $(srcdir)/dngettext.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/dngettext.c ngettext.lo: $(srcdir)/ngettext.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/ngettext.c plural.lo: $(srcdir)/plural.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/plural.c plural-exp.lo: $(srcdir)/plural-exp.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/plural-exp.c localcharset.lo: $(srcdir)/localcharset.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/localcharset.c relocatable.lo: $(srcdir)/relocatable.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/relocatable.c localename.lo: $(srcdir)/localename.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/localename.c log.lo: $(srcdir)/log.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/log.c osdep.lo: $(srcdir)/osdep.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/osdep.c intl-compat.lo: $(srcdir)/intl-compat.c $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/intl-compat.c ref-add.sed: $(srcdir)/ref-add.sin sed -e '/^#/d' -e 's/@''PACKAGE''@/@PACKAGE@/g' $(srcdir)/ref-add.sin > t-ref-add.sed mv t-ref-add.sed ref-add.sed ref-del.sed: $(srcdir)/ref-del.sin sed -e '/^#/d' -e 's/@''PACKAGE''@/@PACKAGE@/g' $(srcdir)/ref-del.sin > t-ref-del.sed mv t-ref-del.sed ref-del.sed INCLUDES = -I. -I$(srcdir) -I.. libgnuintl.h: $(srcdir)/libgnuintl.h.in cp $(srcdir)/libgnuintl.h.in libgnuintl.h libintl.h: libgnuintl.h cp libgnuintl.h libintl.h charset.alias: $(srcdir)/config.charset $(SHELL) $(srcdir)/config.charset '@host@' > t-$@ mv t-$@ $@ check: all # We must not install the libintl.h/libintl.a files if we are on a # system which has the GNU gettext() function in its C library or in a # separate library. # If you want to use the one which comes with this version of the # package, you have to use `configure --with-included-gettext'. install: install-exec install-data install-exec: all if { test "$(PACKAGE)" = "gettext-runtime" || test "$(PACKAGE)" = "gettext-tools"; } \ && test '@USE_INCLUDED_LIBINTL@' = yes; then \ $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(includedir); \ $(INSTALL_DATA) libintl.h $(DESTDIR)$(includedir)/libintl.h; \ $(LIBTOOL) --mode=install \ $(INSTALL_DATA) libintl.$la $(DESTDIR)$(libdir)/libintl.$la; \ if test "@RELOCATABLE@" = yes; then \ dependencies=`sed -n -e 's,^dependency_libs=\(.*\),\1,p' < $(DESTDIR)$(libdir)/libintl.la | sed -e "s,^',," -e "s,'\$$,,"`; \ if test -n "$dependencies"; then \ rm -f $(DESTDIR)$(libdir)/libintl.la; \ fi; \ fi; \ else \ : ; \ fi if test "$(PACKAGE)" = "gettext-tools" \ && test '@USE_INCLUDED_LIBINTL@' = no; then \ $(mkinstalldirs) $(DESTDIR)$(libdir); \ $(LIBTOOL) --mode=install \ $(INSTALL_DATA) libgnuintl.$la $(DESTDIR)$(libdir)/libgnuintl.$la; \ rm -f $(DESTDIR)$(libdir)/preloadable_libintl.so; \ $(INSTALL_DATA) $(DESTDIR)$(libdir)/libgnuintl.so $(DESTDIR)$(libdir)/preloadable_libintl.so; \ $(LIBTOOL) --mode=uninstall \ rm -f $(DESTDIR)$(libdir)/libgnuintl.$la; \ else \ : ; \ fi if test '@USE_INCLUDED_LIBINTL@' = yes; then \ test @GLIBC21@ != no || $(mkinstalldirs) $(DESTDIR)$(libdir); \ temp=$(DESTDIR)$(libdir)/t-charset.alias; \ dest=$(DESTDIR)$(libdir)/charset.alias; \ if test -f $(DESTDIR)$(libdir)/charset.alias; then \ orig=$(DESTDIR)$(libdir)/charset.alias; \ sed -f ref-add.sed $$orig > $$temp; \ $(INSTALL_DATA) $$temp $$dest; \ rm -f $$temp; \ else \ if test @GLIBC21@ = no; then \ orig=charset.alias; \ sed -f ref-add.sed $$orig > $$temp; \ $(INSTALL_DATA) $$temp $$dest; \ rm -f $$temp; \ fi; \ fi; \ $(mkinstalldirs) $(DESTDIR)$(localedir); \ test -f $(DESTDIR)$(localedir)/locale.alias \ && orig=$(DESTDIR)$(localedir)/locale.alias \ || orig=$(srcdir)/locale.alias; \ temp=$(DESTDIR)$(localedir)/t-locale.alias; \ dest=$(DESTDIR)$(localedir)/locale.alias; \ sed -f ref-add.sed $$orig > $$temp; \ $(INSTALL_DATA) $$temp $$dest; \ rm -f $$temp; \ else \ : ; \ fi install-data: all if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \ $(INSTALL_DATA) VERSION $(DESTDIR)$(gettextsrcdir)/VERSION; \ $(INSTALL_DATA) ChangeLog.inst $(DESTDIR)$(gettextsrcdir)/ChangeLog; \ dists="COPYING.LIB-2.0 COPYING.LIB-2.1 $(DISTFILES.common)"; \ for file in $$dists; do \ $(INSTALL_DATA) $(srcdir)/$$file \ $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ chmod a+x $(DESTDIR)$(gettextsrcdir)/config.charset; \ dists="$(DISTFILES.generated)"; \ for file in $$dists; do \ if test -f $$file; then dir=.; else dir=$(srcdir); fi; \ $(INSTALL_DATA) $$dir/$$file \ $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ dists="$(DISTFILES.obsolete)"; \ for file in $$dists; do \ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ else \ : ; \ fi install-strip: install installdirs: if { test "$(PACKAGE)" = "gettext-runtime" || test "$(PACKAGE)" = "gettext-tools"; } \ && test '@USE_INCLUDED_LIBINTL@' = yes; then \ $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(includedir); \ else \ : ; \ fi if test "$(PACKAGE)" = "gettext-tools" \ && test '@USE_INCLUDED_LIBINTL@' = no; then \ $(mkinstalldirs) $(DESTDIR)$(libdir); \ else \ : ; \ fi if test '@USE_INCLUDED_LIBINTL@' = yes; then \ test @GLIBC21@ != no || $(mkinstalldirs) $(DESTDIR)$(libdir); \ $(mkinstalldirs) $(DESTDIR)$(localedir); \ else \ : ; \ fi if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \ else \ : ; \ fi # Define this as empty until I found a useful application. installcheck: uninstall: if { test "$(PACKAGE)" = "gettext-runtime" || test "$(PACKAGE)" = "gettext-tools"; } \ && test '@USE_INCLUDED_LIBINTL@' = yes; then \ rm -f $(DESTDIR)$(includedir)/libintl.h; \ $(LIBTOOL) --mode=uninstall \ rm -f $(DESTDIR)$(libdir)/libintl.$la; \ else \ : ; \ fi if test "$(PACKAGE)" = "gettext-tools" \ && test '@USE_INCLUDED_LIBINTL@' = no; then \ rm -f $(DESTDIR)$(libdir)/preloadable_libintl.so; \ else \ : ; \ fi if test '@USE_INCLUDED_LIBINTL@' = yes; then \ if test -f $(DESTDIR)$(libdir)/charset.alias; then \ temp=$(DESTDIR)$(libdir)/t-charset.alias; \ dest=$(DESTDIR)$(libdir)/charset.alias; \ sed -f ref-del.sed $$dest > $$temp; \ if grep '^# Packages using this file: $$' $$temp > /dev/null; then \ rm -f $$dest; \ else \ $(INSTALL_DATA) $$temp $$dest; \ fi; \ rm -f $$temp; \ fi; \ if test -f $(DESTDIR)$(localedir)/locale.alias; then \ temp=$(DESTDIR)$(localedir)/t-locale.alias; \ dest=$(DESTDIR)$(localedir)/locale.alias; \ sed -f ref-del.sed $$dest > $$temp; \ if grep '^# Packages using this file: $$' $$temp > /dev/null; then \ rm -f $$dest; \ else \ $(INSTALL_DATA) $$temp $$dest; \ fi; \ rm -f $$temp; \ fi; \ else \ : ; \ fi if test "$(PACKAGE)" = "gettext-tools"; then \ for file in VERSION ChangeLog COPYING.LIB-2.0 COPYING.LIB-2.1 $(DISTFILES.common) $(DISTFILES.generated); do \ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ else \ : ; \ fi info dvi ps pdf html: $(OBJECTS): ../config.h libgnuintl.h bindtextdom.$lo dcgettext.$lo dcigettext.$lo dcngettext.$lo dgettext.$lo dngettext.$lo finddomain.$lo gettext.$lo intl-compat.$lo loadmsgcat.$lo localealias.$lo ngettext.$lo textdomain.$lo: $(srcdir)/gettextP.h $(srcdir)/gmo.h $(srcdir)/loadinfo.h dcigettext.$lo loadmsgcat.$lo: $(srcdir)/hash-string.h explodename.$lo l10nflist.$lo: $(srcdir)/loadinfo.h dcigettext.$lo loadmsgcat.$lo plural.$lo plural-exp.$lo: $(srcdir)/plural-exp.h dcigettext.$lo: $(srcdir)/eval-plural.h localcharset.$lo: $(srcdir)/localcharset.h localealias.$lo localcharset.$lo relocatable.$lo: $(srcdir)/relocatable.h tags: TAGS TAGS: $(HEADERS) $(SOURCES) here=`pwd`; cd $(srcdir) && etags -o $$here/TAGS $(HEADERS) $(SOURCES) ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) here=`pwd`; cd $(srcdir) && ctags -o $$here/CTAGS $(HEADERS) $(SOURCES) id: ID ID: $(HEADERS) $(SOURCES) here=`pwd`; cd $(srcdir) && mkid -f$$here/ID $(HEADERS) $(SOURCES) mostlyclean: rm -f *.a *.la *.o *.obj *.lo core core.* rm -f libgnuintl.h libintl.h charset.alias ref-add.sed ref-del.sed rm -f -r .libs _libs clean: mostlyclean distclean: clean rm -f Makefile ID TAGS if test "$(PACKAGE)" = "gettext-runtime" || test "$(PACKAGE)" = "gettext-tools"; then \ rm -f ChangeLog.inst $(DISTFILES.normal); \ else \ : ; \ fi maintainer-clean: distclean @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." # GNU gettext needs not contain the file `VERSION' but contains some # other files which should not be distributed in other packages. distdir = ../$(PACKAGE)-$(VERSION)/$(subdir) dist distdir: Makefile if test "$(PACKAGE)" = "gettext-tools"; then \ : ; \ else \ if test "$(PACKAGE)" = "gettext-runtime"; then \ additional="$(DISTFILES.gettext)"; \ else \ additional="$(DISTFILES.normal)"; \ fi; \ $(MAKE) $(DISTFILES.common) $(DISTFILES.generated) $$additional; \ for file in ChangeLog $(DISTFILES.common) $(DISTFILES.generated) $$additional; do \ if test -f $$file; then dir=.; else dir=$(srcdir); fi; \ cp -p $$dir/$$file $(distdir); \ done; \ fi Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) && $(SHELL) ./config.status # This would be more efficient, but doesn't work any more with autoconf-2.57, # when AC_CONFIG_FILES([intl/Makefile:somedir/Makefile.in]) is used. # cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status # Tell versions [3.59,3.63) of GNU make not to export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: kasumi-2.5/intl/relocatable.h0000644000175000017500000000512610142036016013163 00000000000000/* Provide relocatable packages. Copyright (C) 2003 Free Software Foundation, Inc. Written by Bruno Haible , 2003. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifndef _RELOCATABLE_H #define _RELOCATABLE_H /* This can be enabled through the configure --enable-relocatable option. */ #if ENABLE_RELOCATABLE /* When building a DLL, we must export some functions. Note that because this is a private .h file, we don't need to use __declspec(dllimport) in any case. */ #if defined _MSC_VER && BUILDING_DLL # define RELOCATABLE_DLL_EXPORTED __declspec(dllexport) #else # define RELOCATABLE_DLL_EXPORTED #endif /* Sets the original and the current installation prefix of the package. Relocation simply replaces a pathname starting with the original prefix by the corresponding pathname with the current prefix instead. Both prefixes should be directory names without trailing slash (i.e. use "" instead of "/"). */ extern RELOCATABLE_DLL_EXPORTED void set_relocation_prefix (const char *orig_prefix, const char *curr_prefix); /* Returns the pathname, relocated according to the current installation directory. */ extern const char * relocate (const char *pathname); /* Memory management: relocate() leaks memory, because it has to construct a fresh pathname. If this is a problem because your program calls relocate() frequently, think about caching the result. */ /* Convenience function: Computes the current installation prefix, based on the original installation prefix, the original installation directory of a particular file, and the current pathname of this file. Returns NULL upon failure. */ extern const char * compute_curr_prefix (const char *orig_installprefix, const char *orig_installdir, const char *curr_pathname); #else /* By default, we use the hardwired pathnames. */ #define relocate(pathname) (pathname) #endif #endif /* _RELOCATABLE_H */ kasumi-2.5/intl/plural-exp.h0000644000175000017500000001030410142036016012771 00000000000000/* Expression parsing and evaluation for plural form selection. Copyright (C) 2000, 2001, 2002 Free Software Foundation, Inc. Written by Ulrich Drepper , 2000. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifndef _PLURAL_EXP_H #define _PLURAL_EXP_H #ifndef PARAMS # if __STDC__ || defined __GNUC__ || defined __SUNPRO_C || defined __cplusplus || __PROTOTYPES # define PARAMS(args) args # else # define PARAMS(args) () # endif #endif #ifndef internal_function # define internal_function #endif #ifndef attribute_hidden # define attribute_hidden #endif /* This is the representation of the expressions to determine the plural form. */ struct expression { int nargs; /* Number of arguments. */ enum operator { /* Without arguments: */ var, /* The variable "n". */ num, /* Decimal number. */ /* Unary operators: */ lnot, /* Logical NOT. */ /* Binary operators: */ mult, /* Multiplication. */ divide, /* Division. */ module, /* Modulo operation. */ plus, /* Addition. */ minus, /* Subtraction. */ less_than, /* Comparison. */ greater_than, /* Comparison. */ less_or_equal, /* Comparison. */ greater_or_equal, /* Comparison. */ equal, /* Comparison for equality. */ not_equal, /* Comparison for inequality. */ land, /* Logical AND. */ lor, /* Logical OR. */ /* Ternary operators: */ qmop /* Question mark operator. */ } operation; union { unsigned long int num; /* Number value for `num'. */ struct expression *args[3]; /* Up to three arguments. */ } val; }; /* This is the data structure to pass information to the parser and get the result in a thread-safe way. */ struct parse_args { const char *cp; struct expression *res; }; /* Names for the libintl functions are a problem. This source code is used 1. in the GNU C Library library, 2. in the GNU libintl library, 3. in the GNU gettext tools. The function names in each situation must be different, to allow for binary incompatible changes in 'struct expression'. Furthermore, 1. in the GNU C Library library, the names have a __ prefix, 2.+3. in the GNU libintl library and in the GNU gettext tools, the names must follow ANSI C and not start with __. So we have to distinguish the three cases. */ #ifdef _LIBC # define FREE_EXPRESSION __gettext_free_exp # define PLURAL_PARSE __gettextparse # define GERMANIC_PLURAL __gettext_germanic_plural # define EXTRACT_PLURAL_EXPRESSION __gettext_extract_plural #elif defined (IN_LIBINTL) # define FREE_EXPRESSION libintl_gettext_free_exp # define PLURAL_PARSE libintl_gettextparse # define GERMANIC_PLURAL libintl_gettext_germanic_plural # define EXTRACT_PLURAL_EXPRESSION libintl_gettext_extract_plural #else # define FREE_EXPRESSION free_plural_expression # define PLURAL_PARSE parse_plural_expression # define GERMANIC_PLURAL germanic_plural # define EXTRACT_PLURAL_EXPRESSION extract_plural_expression #endif extern void FREE_EXPRESSION PARAMS ((struct expression *exp)) internal_function; extern int PLURAL_PARSE PARAMS ((void *arg)); extern struct expression GERMANIC_PLURAL attribute_hidden; extern void EXTRACT_PLURAL_EXPRESSION PARAMS ((const char *nullentry, struct expression **pluralp, unsigned long int *npluralsp)) internal_function; #if !defined (_LIBC) && !defined (IN_LIBINTL) extern unsigned long int plural_eval PARAMS ((struct expression *pexp, unsigned long int n)); #endif #endif /* _PLURAL_EXP_H */ kasumi-2.5/intl/locale.alias0000644000175000017500000000514110142036016013004 00000000000000# Locale name alias data base. # Copyright (C) 1996,1997,1998,1999,2000,2001 Free Software Foundation, Inc. # # This program is free software; you can redistribute it and/or modify it # under the terms of the GNU Library General Public License as published # by the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # Library General Public License for more details. # # You should have received a copy of the GNU Library General Public # License along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, # USA. # The format of this file is the same as for the corresponding file of # the X Window System, which normally can be found in # /usr/lib/X11/locale/locale.alias # A single line contains two fields: an alias and a substitution value. # All entries are case independent. # Note: This file is far from being complete. If you have a value for # your own site which you think might be useful for others too, share # it with the rest of us. Send it using the `glibcbug' script to # bugs@gnu.org. # Packages using this file: bokmal no_NO.ISO-8859-1 bokml no_NO.ISO-8859-1 catalan ca_ES.ISO-8859-1 croatian hr_HR.ISO-8859-2 czech cs_CZ.ISO-8859-2 danish da_DK.ISO-8859-1 dansk da_DK.ISO-8859-1 deutsch de_DE.ISO-8859-1 dutch nl_NL.ISO-8859-1 eesti et_EE.ISO-8859-1 estonian et_EE.ISO-8859-1 finnish fi_FI.ISO-8859-1 franais fr_FR.ISO-8859-1 french fr_FR.ISO-8859-1 galego gl_ES.ISO-8859-1 galician gl_ES.ISO-8859-1 german de_DE.ISO-8859-1 greek el_GR.ISO-8859-7 hebrew he_IL.ISO-8859-8 hrvatski hr_HR.ISO-8859-2 hungarian hu_HU.ISO-8859-2 icelandic is_IS.ISO-8859-1 italian it_IT.ISO-8859-1 japanese ja_JP.eucJP japanese.euc ja_JP.eucJP ja_JP ja_JP.eucJP ja_JP.ujis ja_JP.eucJP japanese.sjis ja_JP.SJIS korean ko_KR.eucKR korean.euc ko_KR.eucKR ko_KR ko_KR.eucKR lithuanian lt_LT.ISO-8859-13 nb_NO no_NO.ISO-8859-1 nb_NO.ISO-8859-1 no_NO.ISO-8859-1 norwegian no_NO.ISO-8859-1 nynorsk nn_NO.ISO-8859-1 polish pl_PL.ISO-8859-2 portuguese pt_PT.ISO-8859-1 romanian ro_RO.ISO-8859-2 russian ru_RU.ISO-8859-5 slovak sk_SK.ISO-8859-2 slovene sl_SI.ISO-8859-2 slovenian sl_SI.ISO-8859-2 spanish es_ES.ISO-8859-1 swedish sv_SE.ISO-8859-1 thai th_TH.TIS-620 turkish tr_TR.ISO-8859-9 kasumi-2.5/intl/localcharset.h0000644000175000017500000000255710142036016013357 00000000000000/* Determine a canonical name for the current locale's character encoding. Copyright (C) 2000-2003 Free Software Foundation, Inc. This file is part of the GNU CHARSET Library. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifndef _LOCALCHARSET_H #define _LOCALCHARSET_H #ifdef __cplusplus extern "C" { #endif /* Determine the current locale's character encoding, and canonicalize it into one of the canonical names listed in config.charset. The result must not be freed; it is statically allocated. If the canonical name cannot be determined, the result is a non-canonical name. */ extern const char * locale_charset (void); #ifdef __cplusplus } #endif #endif /* _LOCALCHARSET_H */ kasumi-2.5/intl/libgnuintl.h.in0000644000175000017500000002546210142036016013467 00000000000000/* Message catalogs for internationalization. Copyright (C) 1995-1997, 2000-2003 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifndef _LIBINTL_H #define _LIBINTL_H 1 #include /* The LC_MESSAGES locale category is the category used by the functions gettext() and dgettext(). It is specified in POSIX, but not in ANSI C. On systems that don't define it, use an arbitrary value instead. On Solaris, defines __LOCALE_H (or _LOCALE_H in Solaris 2.5) then includes (i.e. this file!) and then only defines LC_MESSAGES. To avoid a redefinition warning, don't define LC_MESSAGES in this case. */ #if !defined LC_MESSAGES && !(defined __LOCALE_H || (defined _LOCALE_H && defined __sun)) # define LC_MESSAGES 1729 #endif /* We define an additional symbol to signal that we use the GNU implementation of gettext. */ #define __USE_GNU_GETTEXT 1 /* Provide information about the supported file formats. Returns the maximum minor revision number supported for a given major revision. */ #define __GNU_GETTEXT_SUPPORTED_REVISION(major) \ ((major) == 0 ? 1 : -1) /* Resolve a platform specific conflict on DJGPP. GNU gettext takes precedence over _conio_gettext. */ #ifdef __DJGPP__ # undef gettext #endif /* Use _INTL_PARAMS, not PARAMS, in order to avoid clashes with identifiers used by programs. Similarly, test __PROTOTYPES, not PROTOTYPES. */ #ifndef _INTL_PARAMS # if __STDC__ || defined __GNUC__ || defined __SUNPRO_C || defined __cplusplus || __PROTOTYPES # define _INTL_PARAMS(args) args # else # define _INTL_PARAMS(args) () # endif #endif #ifdef __cplusplus extern "C" { #endif /* We redirect the functions to those prefixed with "libintl_". This is necessary, because some systems define gettext/textdomain/... in the C library (namely, Solaris 2.4 and newer, and GNU libc 2.0 and newer). If we used the unprefixed names, there would be cases where the definition in the C library would override the one in the libintl.so shared library. Recall that on ELF systems, the symbols are looked up in the following order: 1. in the executable, 2. in the shared libraries specified on the link command line, in order, 3. in the dependencies of the shared libraries specified on the link command line, 4. in the dlopen()ed shared libraries, in the order in which they were dlopen()ed. The definition in the C library would override the one in libintl.so if either * -lc is given on the link command line and -lintl isn't, or * -lc is given on the link command line before -lintl, or * libintl.so is a dependency of a dlopen()ed shared library but not linked to the executable at link time. Since Solaris gettext() behaves differently than GNU gettext(), this would be unacceptable. The redirection happens by default through macros in C, so that &gettext is independent of the compilation unit, but through inline functions in C++, in order not to interfere with the name mangling of class fields or class methods called 'gettext'. */ /* The user can define _INTL_REDIRECT_INLINE or _INTL_REDIRECT_MACROS. If he doesn't, we choose the method. A third possible method is _INTL_REDIRECT_ASM, supported only by GCC. */ #if !(defined _INTL_REDIRECT_INLINE || defined _INTL_REDIRECT_MACROS) # if __GNUC__ >= 2 && !defined __APPLE_CC__ && (defined __STDC__ || defined __cplusplus) # define _INTL_REDIRECT_ASM # else # ifdef __cplusplus # define _INTL_REDIRECT_INLINE # else # define _INTL_REDIRECT_MACROS # endif # endif #endif /* Auxiliary macros. */ #ifdef _INTL_REDIRECT_ASM # define _INTL_ASM(cname) __asm__ (_INTL_ASMNAME (__USER_LABEL_PREFIX__, #cname)) # define _INTL_ASMNAME(prefix,cnamestring) _INTL_STRINGIFY (prefix) cnamestring # define _INTL_STRINGIFY(prefix) #prefix #else # define _INTL_ASM(cname) #endif /* Look up MSGID in the current default message catalog for the current LC_MESSAGES locale. If not found, returns MSGID itself (the default text). */ #ifdef _INTL_REDIRECT_INLINE extern char *libintl_gettext (const char *__msgid); static inline char *gettext (const char *__msgid) { return libintl_gettext (__msgid); } #else #ifdef _INTL_REDIRECT_MACROS # define gettext libintl_gettext #endif extern char *gettext _INTL_PARAMS ((const char *__msgid)) _INTL_ASM (libintl_gettext); #endif /* Look up MSGID in the DOMAINNAME message catalog for the current LC_MESSAGES locale. */ #ifdef _INTL_REDIRECT_INLINE extern char *libintl_dgettext (const char *__domainname, const char *__msgid); static inline char *dgettext (const char *__domainname, const char *__msgid) { return libintl_dgettext (__domainname, __msgid); } #else #ifdef _INTL_REDIRECT_MACROS # define dgettext libintl_dgettext #endif extern char *dgettext _INTL_PARAMS ((const char *__domainname, const char *__msgid)) _INTL_ASM (libintl_dgettext); #endif /* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY locale. */ #ifdef _INTL_REDIRECT_INLINE extern char *libintl_dcgettext (const char *__domainname, const char *__msgid, int __category); static inline char *dcgettext (const char *__domainname, const char *__msgid, int __category) { return libintl_dcgettext (__domainname, __msgid, __category); } #else #ifdef _INTL_REDIRECT_MACROS # define dcgettext libintl_dcgettext #endif extern char *dcgettext _INTL_PARAMS ((const char *__domainname, const char *__msgid, int __category)) _INTL_ASM (libintl_dcgettext); #endif /* Similar to `gettext' but select the plural form corresponding to the number N. */ #ifdef _INTL_REDIRECT_INLINE extern char *libintl_ngettext (const char *__msgid1, const char *__msgid2, unsigned long int __n); static inline char *ngettext (const char *__msgid1, const char *__msgid2, unsigned long int __n) { return libintl_ngettext (__msgid1, __msgid2, __n); } #else #ifdef _INTL_REDIRECT_MACROS # define ngettext libintl_ngettext #endif extern char *ngettext _INTL_PARAMS ((const char *__msgid1, const char *__msgid2, unsigned long int __n)) _INTL_ASM (libintl_ngettext); #endif /* Similar to `dgettext' but select the plural form corresponding to the number N. */ #ifdef _INTL_REDIRECT_INLINE extern char *libintl_dngettext (const char *__domainname, const char *__msgid1, const char *__msgid2, unsigned long int __n); static inline char *dngettext (const char *__domainname, const char *__msgid1, const char *__msgid2, unsigned long int __n) { return libintl_dngettext (__domainname, __msgid1, __msgid2, __n); } #else #ifdef _INTL_REDIRECT_MACROS # define dngettext libintl_dngettext #endif extern char *dngettext _INTL_PARAMS ((const char *__domainname, const char *__msgid1, const char *__msgid2, unsigned long int __n)) _INTL_ASM (libintl_dngettext); #endif /* Similar to `dcgettext' but select the plural form corresponding to the number N. */ #ifdef _INTL_REDIRECT_INLINE extern char *libintl_dcngettext (const char *__domainname, const char *__msgid1, const char *__msgid2, unsigned long int __n, int __category); static inline char *dcngettext (const char *__domainname, const char *__msgid1, const char *__msgid2, unsigned long int __n, int __category) { return libintl_dcngettext (__domainname, __msgid1, __msgid2, __n, __category); } #else #ifdef _INTL_REDIRECT_MACROS # define dcngettext libintl_dcngettext #endif extern char *dcngettext _INTL_PARAMS ((const char *__domainname, const char *__msgid1, const char *__msgid2, unsigned long int __n, int __category)) _INTL_ASM (libintl_dcngettext); #endif /* Set the current default message catalog to DOMAINNAME. If DOMAINNAME is null, return the current default. If DOMAINNAME is "", reset to the default of "messages". */ #ifdef _INTL_REDIRECT_INLINE extern char *libintl_textdomain (const char *__domainname); static inline char *textdomain (const char *__domainname) { return libintl_textdomain (__domainname); } #else #ifdef _INTL_REDIRECT_MACROS # define textdomain libintl_textdomain #endif extern char *textdomain _INTL_PARAMS ((const char *__domainname)) _INTL_ASM (libintl_textdomain); #endif /* Specify that the DOMAINNAME message catalog will be found in DIRNAME rather than in the system locale data base. */ #ifdef _INTL_REDIRECT_INLINE extern char *libintl_bindtextdomain (const char *__domainname, const char *__dirname); static inline char *bindtextdomain (const char *__domainname, const char *__dirname) { return libintl_bindtextdomain (__domainname, __dirname); } #else #ifdef _INTL_REDIRECT_MACROS # define bindtextdomain libintl_bindtextdomain #endif extern char *bindtextdomain _INTL_PARAMS ((const char *__domainname, const char *__dirname)) _INTL_ASM (libintl_bindtextdomain); #endif /* Specify the character encoding in which the messages from the DOMAINNAME message catalog will be returned. */ #ifdef _INTL_REDIRECT_INLINE extern char *libintl_bind_textdomain_codeset (const char *__domainname, const char *__codeset); static inline char *bind_textdomain_codeset (const char *__domainname, const char *__codeset) { return libintl_bind_textdomain_codeset (__domainname, __codeset); } #else #ifdef _INTL_REDIRECT_MACROS # define bind_textdomain_codeset libintl_bind_textdomain_codeset #endif extern char *bind_textdomain_codeset _INTL_PARAMS ((const char *__domainname, const char *__codeset)) _INTL_ASM (libintl_bind_textdomain_codeset); #endif /* Support for relocatable packages. */ /* Sets the original and the current installation prefix of the package. Relocation simply replaces a pathname starting with the original prefix by the corresponding pathname with the current prefix instead. Both prefixes should be directory names without trailing slash (i.e. use "" instead of "/"). */ #define libintl_set_relocation_prefix libintl_set_relocation_prefix extern void libintl_set_relocation_prefix _INTL_PARAMS ((const char *orig_prefix, const char *curr_prefix)); #ifdef __cplusplus } #endif #endif /* libintl.h */ kasumi-2.5/intl/eval-plural.h0000644000175000017500000000554610142036016013140 00000000000000/* Plural expression evaluation. Copyright (C) 2000-2002 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifndef STATIC #define STATIC static #endif /* Evaluate the plural expression and return an index value. */ STATIC unsigned long int plural_eval PARAMS ((struct expression *pexp, unsigned long int n)) internal_function; STATIC unsigned long int internal_function plural_eval (pexp, n) struct expression *pexp; unsigned long int n; { switch (pexp->nargs) { case 0: switch (pexp->operation) { case var: return n; case num: return pexp->val.num; default: break; } /* NOTREACHED */ break; case 1: { /* pexp->operation must be lnot. */ unsigned long int arg = plural_eval (pexp->val.args[0], n); return ! arg; } case 2: { unsigned long int leftarg = plural_eval (pexp->val.args[0], n); if (pexp->operation == lor) return leftarg || plural_eval (pexp->val.args[1], n); else if (pexp->operation == land) return leftarg && plural_eval (pexp->val.args[1], n); else { unsigned long int rightarg = plural_eval (pexp->val.args[1], n); switch (pexp->operation) { case mult: return leftarg * rightarg; case divide: #if !INTDIV0_RAISES_SIGFPE if (rightarg == 0) raise (SIGFPE); #endif return leftarg / rightarg; case module: #if !INTDIV0_RAISES_SIGFPE if (rightarg == 0) raise (SIGFPE); #endif return leftarg % rightarg; case plus: return leftarg + rightarg; case minus: return leftarg - rightarg; case less_than: return leftarg < rightarg; case greater_than: return leftarg > rightarg; case less_or_equal: return leftarg <= rightarg; case greater_or_equal: return leftarg >= rightarg; case equal: return leftarg == rightarg; case not_equal: return leftarg != rightarg; default: break; } } /* NOTREACHED */ break; } case 3: { /* pexp->operation must be qmop. */ unsigned long int boolarg = plural_eval (pexp->val.args[0], n); return plural_eval (pexp->val.args[boolarg ? 1 : 2], n); } } /* NOTREACHED */ return 0; } kasumi-2.5/intl/gmo.h0000644000175000017500000001125710142036016011472 00000000000000/* Description of GNU message catalog format: general file layout. Copyright (C) 1995, 1997, 2000-2002 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifndef _GETTEXT_H #define _GETTEXT_H 1 #include /* @@ end of prolog @@ */ /* The magic number of the GNU message catalog format. */ #define _MAGIC 0x950412de #define _MAGIC_SWAPPED 0xde120495 /* Revision number of the currently used .mo (binary) file format. */ #define MO_REVISION_NUMBER 0 /* The following contortions are an attempt to use the C preprocessor to determine an unsigned integral type that is 32 bits wide. An alternative approach is to use autoconf's AC_CHECK_SIZEOF macro, but as of version autoconf-2.13, the AC_CHECK_SIZEOF macro doesn't work when cross-compiling. */ #if __STDC__ # define UINT_MAX_32_BITS 4294967295U #else # define UINT_MAX_32_BITS 0xFFFFFFFF #endif /* If UINT_MAX isn't defined, assume it's a 32-bit type. This should be valid for all systems GNU cares about because that doesn't include 16-bit systems, and only modern systems (that certainly have ) have 64+-bit integral types. */ #ifndef UINT_MAX # define UINT_MAX UINT_MAX_32_BITS #endif #if UINT_MAX == UINT_MAX_32_BITS typedef unsigned nls_uint32; #else # if USHRT_MAX == UINT_MAX_32_BITS typedef unsigned short nls_uint32; # else # if ULONG_MAX == UINT_MAX_32_BITS typedef unsigned long nls_uint32; # else /* The following line is intended to throw an error. Using #error is not portable enough. */ "Cannot determine unsigned 32-bit data type." # endif # endif #endif /* Header for binary .mo file format. */ struct mo_file_header { /* The magic number. */ nls_uint32 magic; /* The revision number of the file format. */ nls_uint32 revision; /* The following are only used in .mo files with major revision 0. */ /* The number of strings pairs. */ nls_uint32 nstrings; /* Offset of table with start offsets of original strings. */ nls_uint32 orig_tab_offset; /* Offset of table with start offsets of translated strings. */ nls_uint32 trans_tab_offset; /* Size of hash table. */ nls_uint32 hash_tab_size; /* Offset of first hash table entry. */ nls_uint32 hash_tab_offset; /* The following are only used in .mo files with minor revision >= 1. */ /* The number of system dependent segments. */ nls_uint32 n_sysdep_segments; /* Offset of table describing system dependent segments. */ nls_uint32 sysdep_segments_offset; /* The number of system dependent strings pairs. */ nls_uint32 n_sysdep_strings; /* Offset of table with start offsets of original sysdep strings. */ nls_uint32 orig_sysdep_tab_offset; /* Offset of table with start offsets of translated sysdep strings. */ nls_uint32 trans_sysdep_tab_offset; }; /* Descriptor for static string contained in the binary .mo file. */ struct string_desc { /* Length of addressed string, not including the trailing NUL. */ nls_uint32 length; /* Offset of string in file. */ nls_uint32 offset; }; /* The following are only used in .mo files with minor revision >= 1. */ /* Descriptor for system dependent string segment. */ struct sysdep_segment { /* Length of addressed string, including the trailing NUL. */ nls_uint32 length; /* Offset of string in file. */ nls_uint32 offset; }; /* Descriptor for system dependent string. */ struct sysdep_string { /* Offset of static string segments in file. */ nls_uint32 offset; /* Alternating sequence of static and system dependent segments. The last segment is a static segment, including the trailing NUL. */ struct segment_pair { /* Size of static segment. */ nls_uint32 segsize; /* Reference to system dependent string segment, or ~0 at the end. */ nls_uint32 sysdepref; } segments[1]; }; /* Marker for the end of the segments[] array. This has the value 0xFFFFFFFF, regardless whether 'int' is 16 bit, 32 bit, or 64 bit. */ #define SEGMENTS_END ((nls_uint32) ~0) /* @@ begin of epilog @@ */ #endif /* gettext.h */ kasumi-2.5/intl/ref-del.sin0000644000175000017500000000202410142036016012560 00000000000000# Remove this package from a list of references stored in a text file. # # Copyright (C) 2000 Free Software Foundation, Inc. # # This program is free software; you can redistribute it and/or modify it # under the terms of the GNU Library General Public License as published # by the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # Library General Public License for more details. # # You should have received a copy of the GNU Library General Public # License along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, # USA. # # Written by Bruno Haible . # /^# Packages using this file: / { s/# Packages using this file:// s/ @PACKAGE@ / / s/^/# Packages using this file:/ } kasumi-2.5/intl/dcngettext.c0000644000175000017500000000356710142036016013061 00000000000000/* Implementation of the dcngettext(3) function. Copyright (C) 1995-1999, 2000, 2001, 2002 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifdef HAVE_CONFIG_H # include #endif #include "gettextP.h" #ifdef _LIBC # include #else # include "libgnuintl.h" #endif /* @@ end of prolog @@ */ /* Names for the libintl functions are a problem. They must not clash with existing names and they should follow ANSI C. But this source code is also used in GNU C Library where the names have a __ prefix. So we have to make a difference here. */ #ifdef _LIBC # define DCNGETTEXT __dcngettext # define DCIGETTEXT __dcigettext #else # define DCNGETTEXT libintl_dcngettext # define DCIGETTEXT libintl_dcigettext #endif /* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY locale. */ char * DCNGETTEXT (domainname, msgid1, msgid2, n, category) const char *domainname; const char *msgid1; const char *msgid2; unsigned long int n; int category; { return DCIGETTEXT (domainname, msgid1, msgid2, 1, n, category); } #ifdef _LIBC /* Alias for function name in GNU C Library. */ weak_alias (__dcngettext, dcngettext); #endif kasumi-2.5/KasumiMainWindow.cxx0000644000175000017500000007726511227557404013574 00000000000000/********************************************************************* * * KasumiMainWindow.cxx * * Kasumi - a management tool for a private dictionary of anthy * * Copyright (C) 2004-2006 Takashi Nakamoto * Copyright (C) 2005 Takuro Ashie * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. * *********************************************************************/ #include #include "cellrendererspin.h" #include #include #include "KasumiMainWindow.hxx" #include "KasumiException.hxx" #include "KasumiWord.hxx" #include "KasumiDic.hxx" #include "KasumiString.hxx" #include "KasumiAddWindow.hxx" #include "KasumiConfiguration.hxx" #include #include "intl.h" extern "C"{ // ad-hoc solution for a defect of Anthy #include "anthy/dicutil.h" } #ifdef HAVE_CONFIG_H #include "config.h" #endif using namespace std; KasumiMainWindow::KasumiMainWindow(KasumiDic *aDictionary, KasumiConfiguration *conf){ this->conf = conf; dictionary = aDictionary; modificationFlag = false; createWindow(); createWordList(); registerCallbackFunctions(); gtk_window_set_position (GTK_WINDOW(mWindow), GTK_WIN_POS_MOUSE); gtk_window_resize(GTK_WINDOW(mWindow), 300,300); // ToDo: reset window size to be same as the window size when Kasumi quit the last time gtk_widget_show(mWindow); refresh(); dictionary->registerEventListener(this); } void KasumiMainWindow::createWindow() { GtkWidget *vbox1; GtkWidget *vbox2; GtkWidget *label1; GtkWidget *hbox1; GSList *mSpellingRadio_group = NULL; GtkWidget *alignment; GtkWidget *hbuttonbox1; mWindow = gtk_window_new (GTK_WINDOW_TOPLEVEL); gtk_widget_set_size_request(mWindow, -1, 400); gtk_window_set_title (GTK_WINDOW (mWindow), _("Kasumi")); vbox1 = gtk_vbox_new (FALSE, 0); gtk_container_set_border_width(GTK_CONTAINER(vbox1), 6); gtk_widget_show (vbox1); gtk_container_add (GTK_CONTAINER (mWindow), vbox1); mScrolledWindow = gtk_scrolled_window_new (NULL, NULL); gtk_container_set_border_width(GTK_CONTAINER(mScrolledWindow), 6); gtk_widget_show (mScrolledWindow); gtk_box_pack_start (GTK_BOX (vbox1), mScrolledWindow, TRUE, TRUE, 0); gtk_scrolled_window_set_shadow_type (GTK_SCROLLED_WINDOW (mScrolledWindow), GTK_SHADOW_IN); gtk_scrolled_window_set_policy(GTK_SCROLLED_WINDOW(mScrolledWindow), GTK_POLICY_AUTOMATIC, GTK_POLICY_AUTOMATIC); mWordListView = gtk_tree_view_new (); gtk_widget_show (mWordListView); gtk_container_add (GTK_CONTAINER (mScrolledWindow), mWordListView); vbox2 = gtk_vbox_new (FALSE, 0); gtk_container_set_border_width(GTK_CONTAINER(vbox2), 6); gtk_widget_show (vbox2); gtk_box_pack_start (GTK_BOX (vbox1), vbox2, FALSE, FALSE, 0); label1 = gtk_label_new (NULL); gtk_label_set_markup (GTK_LABEL (label1), _("Search:")); gtk_widget_show (label1); gtk_box_pack_start (GTK_BOX (vbox2), label1, FALSE, FALSE, 0); gtk_misc_set_alignment (GTK_MISC (label1), 0, 0.5); gtk_misc_set_padding (GTK_MISC (label1), 4, 4); hbox1 = gtk_hbox_new (FALSE, 0); gtk_widget_show (hbox1); gtk_box_pack_start (GTK_BOX (vbox2), hbox1, TRUE, TRUE, 0); mSpellingRadio = gtk_radio_button_new_with_mnemonic (NULL, _("Search by Spelling")); gtk_widget_show (mSpellingRadio); gtk_box_pack_start (GTK_BOX (hbox1), mSpellingRadio, FALSE, FALSE, 20); gtk_radio_button_set_group (GTK_RADIO_BUTTON (mSpellingRadio), mSpellingRadio_group); mSpellingRadio_group = gtk_radio_button_get_group (GTK_RADIO_BUTTON (mSpellingRadio)); mSoundRadio = gtk_radio_button_new_with_mnemonic (NULL, _("Search by Sound")); gtk_widget_show (mSoundRadio); gtk_box_pack_start (GTK_BOX (hbox1), mSoundRadio, FALSE, FALSE, 0); gtk_radio_button_set_group (GTK_RADIO_BUTTON (mSoundRadio), mSpellingRadio_group); mSpellingRadio_group = gtk_radio_button_get_group (GTK_RADIO_BUTTON (mSoundRadio)); alignment = gtk_alignment_new (0.5, 0.5, 1, 1); gtk_widget_show (alignment); gtk_box_pack_start (GTK_BOX (vbox2), alignment, FALSE, FALSE, 6); gtk_alignment_set_padding (GTK_ALIGNMENT (alignment), 0, 0, 18, 0); mSearchEntry = gtk_entry_new (); gtk_widget_show (mSearchEntry); gtk_container_add (GTK_CONTAINER (alignment), mSearchEntry); alignment = gtk_alignment_new (0.5, 0.5, 1, 1); gtk_widget_show (alignment); gtk_box_pack_start (GTK_BOX (vbox1), alignment, FALSE, FALSE, 6); gtk_alignment_set_padding (GTK_ALIGNMENT (alignment), 0, 0, 6, 6); hbuttonbox1 = gtk_hbutton_box_new (); gtk_widget_show (hbuttonbox1); gtk_container_add (GTK_CONTAINER (alignment), hbuttonbox1); gtk_box_set_spacing(GTK_BOX(hbuttonbox1), 6); gtk_button_box_set_layout (GTK_BUTTON_BOX (hbuttonbox1), GTK_BUTTONBOX_END); mSaveButton = gtk_button_new_from_stock ("gtk-save"); gtk_widget_show (mSaveButton); gtk_box_pack_start (GTK_BOX (hbuttonbox1), mSaveButton, FALSE, TRUE, 0); GTK_WIDGET_SET_FLAGS (mSaveButton, GTK_CAN_DEFAULT); mAddButton = gtk_button_new_from_stock ("gtk-add"); gtk_widget_show (mAddButton); gtk_box_pack_start (GTK_BOX (hbuttonbox1), mAddButton, FALSE, TRUE, 0); GTK_WIDGET_SET_FLAGS (mAddButton, GTK_CAN_DEFAULT); mRemoveButton = gtk_button_new_from_stock ("gtk-delete"); gtk_widget_show (mRemoveButton); gtk_box_pack_start (GTK_BOX (hbuttonbox1), mRemoveButton, FALSE, TRUE, 0); GTK_WIDGET_SET_FLAGS (mRemoveButton, GTK_CAN_DEFAULT); mQuitButton = gtk_button_new_from_stock ("gtk-close"); gtk_widget_show (mQuitButton); gtk_box_pack_end (GTK_BOX (hbuttonbox1), mQuitButton, FALSE, TRUE, 0); GTK_WIDGET_SET_FLAGS (mQuitButton, GTK_CAN_DEFAULT); } void KasumiMainWindow::createWordList() { // renderer and column GtkCellRenderer *renderer = gtk_cell_renderer_text_new(); g_signal_connect(G_OBJECT(renderer), "edited", G_CALLBACK(_call_back_edited_spelling_column), this); g_signal_connect(G_OBJECT(renderer), "editing-started", G_CALLBACK(_call_back_editing_started_spelling_column), this); g_object_set(renderer, "editable", TRUE, NULL); mSpellingColumn = gtk_tree_view_column_new_with_attributes(_("Spelling"), renderer, "text", COL_WORD, NULL); gtk_tree_view_column_set_min_width(mSpellingColumn, 80); gtk_tree_view_column_set_resizable(mSpellingColumn, true); gtk_tree_view_insert_column(GTK_TREE_VIEW(mWordListView), mSpellingColumn, -1); renderer = gtk_cell_renderer_text_new(); g_signal_connect(G_OBJECT(renderer), "edited", G_CALLBACK(_call_back_edited_sound_column), this); g_signal_connect(G_OBJECT(renderer), "editing-started", G_CALLBACK(_call_back_editing_started_sound_column), this); g_object_set(renderer, "editable", TRUE, NULL); mSoundColumn = gtk_tree_view_column_new_with_attributes(_("Sound"), renderer, "text", COL_YOMI, NULL); gtk_tree_view_column_set_min_width(mSoundColumn, 80); gtk_tree_view_column_set_resizable(mSoundColumn, true); gtk_tree_view_insert_column(GTK_TREE_VIEW(mWordListView),mSoundColumn,-1); gtk_tree_view_column_set_clickable(mSoundColumn,TRUE); g_signal_connect(G_OBJECT(mSoundColumn), "clicked", G_CALLBACK(_call_back_clicked_column_header), this); const int FREQ_LBOUND = conf->getPropertyValueByInt("MinFrequency"); const int FREQ_UBOUND = conf->getPropertyValueByInt("MaxFrequency"); renderer = gui_cell_renderer_spin_new(FREQ_LBOUND, FREQ_UBOUND, 1, FREQ_UBOUND / 100, FREQ_UBOUND / 100, 10, 0); g_signal_connect(G_OBJECT(renderer), "edited", G_CALLBACK(_call_back_edited_freq_column), this); g_signal_connect(G_OBJECT(renderer), "editing-started", G_CALLBACK(_call_back_editing_started_freq_column), this); g_object_set(renderer, "editable", TRUE, NULL); mFreqColumn = gtk_tree_view_column_new_with_attributes(_("Frequency"), renderer, "text", COL_FREQ, NULL); gtk_tree_view_column_set_min_width(mFreqColumn, 60); gtk_tree_view_column_set_resizable(mFreqColumn, true); gtk_tree_view_insert_column(GTK_TREE_VIEW(mWordListView),mFreqColumn,-1); gtk_tree_view_column_set_clickable(mFreqColumn, TRUE); g_signal_connect(G_OBJECT(mFreqColumn), "clicked", G_CALLBACK(_call_back_clicked_column_header), this); // word type column - combo renderer GtkListStore *gWordTypeList = gtk_list_store_new(WORDTYPE_NUM_COLS,G_TYPE_STRING,G_TYPE_POINTER); GtkTreeIter iter; WordTypeList::iterator p = KasumiWordType::beginWordTypeList(); while(p != KasumiWordType::endWordTypeList()) { gtk_list_store_append(gWordTypeList,&iter); gtk_list_store_set(gWordTypeList,&iter, COL_UI_STRING, (*p)->getUIString().c_str(), COL_WORDTYPE_POINTER, (*p), -1); p++; } renderer = gtk_cell_renderer_combo_new(); g_signal_connect(G_OBJECT(renderer), "editing-started", G_CALLBACK(_call_back_editing_started_wordtype_column), this); g_object_set(renderer, "model", gWordTypeList, "text-column", COL_UI_STRING, "has-entry", FALSE, "editable", TRUE, NULL); mWordTypeColumn = gtk_tree_view_column_new_with_attributes(_("WordClass"), renderer, "text", COL_PART, NULL); gtk_tree_view_column_set_resizable(mWordTypeColumn, true); gtk_tree_view_insert_column(GTK_TREE_VIEW(mWordListView),mWordTypeColumn,-1); gtk_tree_view_column_set_clickable(mWordTypeColumn, TRUE); g_signal_connect(G_OBJECT(mWordTypeColumn), "clicked", G_CALLBACK(_call_back_clicked_column_header), this); // model WordList = gtk_list_store_new(NUM_COLS,G_TYPE_UINT, G_TYPE_STRING,G_TYPE_STRING, G_TYPE_UINT,G_TYPE_STRING); SortList = gtk_tree_model_sort_new_with_model(GTK_TREE_MODEL(WordList)); gtk_tree_sortable_set_sort_func(GTK_TREE_SORTABLE(SortList), COL_YOMI, sortFuncBySound, NULL, NULL); gtk_tree_sortable_set_sort_func(GTK_TREE_SORTABLE(SortList), COL_FREQ, sortFuncByFreq, NULL, NULL); gtk_tree_sortable_set_sort_func(GTK_TREE_SORTABLE(SortList), COL_PART, sortFuncByWordClass, NULL, NULL); gtk_tree_view_set_model(GTK_TREE_VIEW(mWordListView), GTK_TREE_MODEL(SortList)); SortListSelection = gtk_tree_view_get_selection(GTK_TREE_VIEW(mWordListView)); gtk_tree_selection_set_mode(SortListSelection, GTK_SELECTION_SINGLE); // destroy model automatically with view g_object_unref(GTK_TREE_MODEL(WordList)); } void KasumiMainWindow::registerCallbackFunctions() { // window g_signal_connect(G_OBJECT(mWindow), "delete_event", G_CALLBACK(_call_back_delete_event), this); // buttons g_signal_connect(G_OBJECT(mQuitButton), "clicked", G_CALLBACK(_call_back_quit), this); g_signal_connect(G_OBJECT(mSaveButton), "clicked", G_CALLBACK(_call_back_store), this); g_signal_connect(G_OBJECT(mAddButton), "clicked", G_CALLBACK(_call_back_add), this); g_signal_connect(G_OBJECT(mRemoveButton), "clicked", G_CALLBACK(_call_back_remove), this); /* // This button is obsolete g_signal_connect(G_OBJECT(mChangeModeButton), "clicked", G_CALLBACK(_call_back_adding_mode), this); */ // search entry g_signal_connect(G_OBJECT(mSearchEntry), "changed", G_CALLBACK(_call_back_changed_search_entry), this); g_signal_connect(G_OBJECT(mSearchEntry), "activate", G_CALLBACK(_call_back_activate_search_entry), this); // called when Entry key is pressed } void KasumiMainWindow::refresh(){ GtkTreeModel *model = GTK_TREE_MODEL(SortList); GtkTreeIter iter; gtk_list_store_clear(WordList); list::iterator p = dictionary->firstWordIter(); while(p != dictionary->endWordIter()){ try{ KasumiWord *word = (*p); if(word != NULL && word->getFrequency() != 0){ gtk_list_store_append(WordList,&iter); gtk_list_store_set(WordList,&iter, COL_ID,word->getID(), COL_WORD,word->getSpellingByUTF8().c_str(), COL_YOMI,word->getSoundByUTF8().c_str(), COL_FREQ,word->getFrequency(), COL_PART,word->getWordTypeUIString().c_str(), -1); } }catch(KasumiException e){ handleException(e); } p++; } // If no words, nothing to do more if(!gtk_tree_model_get_iter_first(model, &iter)) return; // select first word gtk_tree_selection_select_iter(SortListSelection,&iter); } KasumiMainWindow::~KasumiMainWindow(){ dictionary->removeEventListener(this); destroy(); } void KasumiMainWindow::destroy(){ gtk_widget_destroy(mWindow); } void KasumiMainWindow::quit(){ if(modificationFlag){ GtkWidget *dialog = gtk_message_dialog_new (GTK_WINDOW(mWindow), GTK_DIALOG_DESTROY_WITH_PARENT, GTK_MESSAGE_QUESTION, GTK_BUTTONS_YES_NO, _("Your dictionary was changed. Do you save these changes " "before Kasumi quits?")); switch(gtk_dialog_run (GTK_DIALOG (dialog))){ case GTK_RESPONSE_YES: dictionary->store(); break; case GTK_RESPONSE_NO: break; default: cerr << "Error: Unexcepted return value of dialog's run" << endl; exit(1); } gtk_widget_destroy (dialog); } delete dictionary; delete this; gtk_main_quit(); } void KasumiMainWindow::ClickedStoreButton(){ try{ dictionary->store(); modificationFlag = false; }catch(KasumiException e){ cerr << e.getMessage() << endl; exit(1); } } void KasumiMainWindow::ClickedAddButton(){ KasumiWord *word = KasumiWord::createNewWord(conf); dictionary->appendWord(word); } void KasumiMainWindow::ClickedRemoveButton(){ GtkTreeModel *model = GTK_TREE_MODEL(SortList); GtkTreeIter iter; unsigned int id; if(gtk_tree_selection_get_selected(SortListSelection, &model, &iter)){ gtk_tree_model_get(model, &iter, COL_ID, &id, -1); dictionary->removeWord(id); } } void KasumiMainWindow::SwitchToAddingMode(){ new KasumiAddWindow(dictionary,conf); delete this; } void KasumiMainWindow::startedEditingTextColumn(GtkCellEditable *editable, string path, TextColumn col) { editingPath = gtk_tree_path_new_from_string(path.c_str()); g_signal_connect(G_OBJECT(editable), "key-press-event", G_CALLBACK(_call_back_key_pressed_text_column), this); } void KasumiMainWindow::pressedKeyOnTextColumn(GtkWidget *widget, GdkEventKey *event) { lastKeyState = event->state; lastKeyVal = event->keyval; } void KasumiMainWindow::editedTextColumn(GtkCellRendererText *renderer, const string &newText, TextColumn col) { try{ if(editingPath == NULL) throw KasumiException(string("internal error: editingPath is already freed."), STDERR, KILL); GtkTreeIter iter; gtk_tree_model_get_iter(SortList, &iter, editingPath); unsigned int id; gtk_tree_model_get(SortList, &iter, COL_ID, &id, -1); KasumiWord *word = KasumiWord::getWordFromID(id); if(col == SPELLING) { word->setSpellingByUTF8(newText); } else if(col == SOUND) { word->setSoundByUTF8(newText); } else if(col == FREQ) { word->setFrequency(str2int(newText)); } GtkTreePath *editedPath = gtk_tree_path_copy(editingPath); gtk_tree_path_free(editingPath); editingPath = NULL; // set cursor right or left GtkTreeViewColumn *postCol = NULL; if(lastKeyVal == GDK_Tab) { if(lastKeyState & GDK_CONTROL_MASK) { // set cursor left switch(col){ case SPELLING: postCol = NULL; break; case SOUND: postCol = mSpellingColumn; break; case FREQ: postCol = mSoundColumn; break; } } else { // set cursor right switch(col){ case SPELLING: postCol = mSoundColumn; break; case SOUND: postCol = mFreqColumn; break; case FREQ: postCol = mWordTypeColumn; break; } } } gtk_tree_view_set_cursor(GTK_TREE_VIEW(mWordListView), editedPath, postCol, false); gtk_tree_path_free(editedPath); }catch(KasumiException e){ handleException(e); } } void KasumiMainWindow::startedEditingWordTypeColumn(GtkCellEditable *editable, string path) { editingPath = gtk_tree_path_new_from_string(path.c_str()); g_signal_connect(G_OBJECT(editable), "changed", G_CALLBACK(_call_back_changed_wordtype_column), this); } void KasumiMainWindow::changedWordTypeColumn(GtkComboBox *combo) { try{ // get which word type was selected GtkTreeIter iter; KasumiWordType *type; GtkTreeModel *model = gtk_combo_box_get_model(combo); gtk_combo_box_get_active_iter(combo, &iter); gtk_tree_model_get(model, &iter, COL_WORDTYPE_POINTER, &type, -1); // get edited word if(editingPath == NULL) throw KasumiException(string("internal error: editingPath is already freed."), STDERR, KILL); gtk_tree_model_get_iter(SortList, &iter, editingPath); unsigned int id; gtk_tree_model_get(SortList, &iter, COL_ID, &id, -1); KasumiWord *word = KasumiWord::getWordFromID(id); word->setWordType(type); gtk_tree_path_free(editingPath); editingPath = NULL; }catch(KasumiException e){ handleException(e); } } void KasumiMainWindow::FindNext(bool fromCurrent){ GtkTreeModel *model = GTK_TREE_MODEL(SortList); GtkTreeIter iter; KasumiWord *word; GtkTreeIter StartIter; unsigned int id; string searchString = string(gtk_entry_get_text(GTK_ENTRY(mSearchEntry))); string comparedString; // undo the modified text color gtk_widget_modify_text(mSearchEntry, GTK_STATE_NORMAL, NULL); SearchBy by = SPELLING; if(gtk_toggle_button_get_active(GTK_TOGGLE_BUTTON(mSoundRadio))){ by = SOUND; } if(!gtk_tree_selection_get_selected(SortListSelection, &model, &iter)){ if(!gtk_tree_model_get_iter_first(model, &iter)){ // If no words, do nothing. return; } } StartIter = iter; if(fromCurrent){ // Search from the selected word // nothing to do // to prevent from calling gtk_tree_model_iter_next ) }else if(!gtk_tree_model_iter_next(model,&iter)){ // Search from next word if a certain word is selected. // If the selected is the last word, seek from the first word. // If no words, do nothing; if(!gtk_tree_model_get_iter_first(model, &iter)) return; } // liner search! do{ gtk_tree_model_get(model, &iter, COL_ID, &id, -1); word = KasumiWord::getWordFromID(id); if(by == SPELLING){ comparedString = word->getSpellingByUTF8(); }else{ comparedString = word->getSoundByUTF8(); } if(comparedString.find(searchString,0) == 0){ // if found, select that word and don't search any more gtk_tree_selection_select_iter(SortListSelection,&iter); return; } }while(gtk_tree_model_iter_next(model, &iter)); // from first gtk_tree_model_get_iter_first(model, &iter); do{ gtk_tree_model_get(model, &iter, COL_ID, &id, -1); word = KasumiWord::getWordFromID(id); if(by == SPELLING){ comparedString = word->getSpellingByUTF8(); }else{ comparedString = word->getSoundByUTF8(); } if(comparedString.find(searchString,0) == 0){ gtk_tree_selection_select_iter(SortListSelection, &iter); return; // succeed searching } }while(gtk_tree_model_iter_next(model, &iter) && (StartIter.user_data != iter.user_data || StartIter.user_data2 != iter.user_data2 || StartIter.user_data3 != iter.user_data3)); // found nothing GdkColor red; red.red = 65535; red.green = red.blue = 0; gtk_widget_modify_text(mSearchEntry, GTK_STATE_NORMAL, &red); } void KasumiMainWindow::SortBy(GtkTreeViewColumn *column){ GtkSortType order; order = gtk_tree_view_column_get_sort_order(column); order = (order == GTK_SORT_ASCENDING) ? GTK_SORT_DESCENDING : GTK_SORT_ASCENDING; gtk_tree_view_column_set_sort_indicator(mSoundColumn,FALSE); gtk_tree_view_column_set_sort_indicator(mFreqColumn,FALSE); gtk_tree_view_column_set_sort_indicator(mWordTypeColumn,FALSE); if(column == mSoundColumn){ gtk_tree_sortable_set_sort_column_id(GTK_TREE_SORTABLE(SortList), COL_YOMI, order); }else if(column == mFreqColumn){ gtk_tree_sortable_set_sort_column_id(GTK_TREE_SORTABLE(SortList), COL_FREQ, order); }else if(column == mWordTypeColumn){ gtk_tree_sortable_set_sort_column_id(GTK_TREE_SORTABLE(SortList), COL_PART, order); } gtk_tree_view_column_set_sort_indicator(column,TRUE); gtk_tree_view_column_set_sort_order(column,order); } void KasumiMainWindow::removedWord(unsigned int id){ refresh(); modificationFlag = true; } void KasumiMainWindow::appendedWord(KasumiWord *word){ GtkTreeIter iter; gtk_list_store_append(WordList,&iter); gtk_list_store_set(WordList, &iter, COL_ID, word->getID(), COL_WORD, word->getSpellingByUTF8().c_str(), COL_YOMI, word->getSoundByUTF8().c_str(), COL_FREQ, word->getFrequency(), COL_PART, word->getWordTypeUIString().c_str(), -1); GtkTreeIter sort_iter; gtk_tree_model_sort_convert_child_iter_to_iter(GTK_TREE_MODEL_SORT(SortList), &sort_iter,&iter); gtk_tree_selection_select_iter(SortListSelection,&sort_iter); modificationFlag = true; // set the vertical scroll bar of the tree view undermost // removed: These codes doesn't work well. /* GtkAdjustment *adjustment = gtk_scrolled_window_get_vadjustment(GTK_SCROLLED_WINDOW(mScrolledWindow)); gtk_adjustment_set_value(adjustment, adjustment->upper); */ // start editing for spelling forcibly GtkTreePath *path = gtk_tree_model_get_path(SortList, &sort_iter); gtk_tree_view_set_cursor(GTK_TREE_VIEW(mWordListView), path, mSpellingColumn, true); gtk_tree_path_free(path); } void KasumiMainWindow::modifiedWord(KasumiWord *word){ unsigned int id = word->getID(); GtkTreeIter *iter = findCorrespondingIter(id); if(iter != NULL) gtk_list_store_set(WordList,iter, COL_ID,id, COL_WORD,word->getSpellingByUTF8().c_str(), COL_YOMI,word->getSoundByUTF8().c_str(), COL_FREQ,word->getFrequency(), COL_PART,word->getWordTypeUIString().c_str(), -1); free(iter); modificationFlag = true; } // Do not returns iter of SortList but WordList GtkTreeIter *KasumiMainWindow::findCorrespondingIter(unsigned int id){ unsigned int i; GtkTreeModel *model = GTK_TREE_MODEL(WordList); GtkTreeIter *iter = (GtkTreeIter*)calloc(1,sizeof(GtkTreeIter)); gtk_tree_model_get_iter_first(model, iter); do{ gtk_tree_model_get(model, iter, COL_ID, &i, -1); if(id == i){ return iter; } }while(gtk_tree_model_iter_next(model, iter)); return NULL; } void _call_back_delete_event(GtkWidget *widget, GdkEvent *event, gpointer data){ KasumiMainWindow *window = (KasumiMainWindow *)data; window->quit(); } void _call_back_quit(GtkWidget *widget, gpointer data){ KasumiMainWindow *window = (KasumiMainWindow *)data; window->quit(); } void _call_back_store(GtkWidget *widget, gpointer data){ KasumiMainWindow *window = (KasumiMainWindow *)data; window->ClickedStoreButton(); } void _call_back_add(GtkWidget *widget, gpointer data){ KasumiMainWindow *window = (KasumiMainWindow *)data; window->ClickedAddButton(); } void _call_back_remove(GtkWidget *widget, gpointer data){ KasumiMainWindow *window = (KasumiMainWindow *)data; window->ClickedRemoveButton(); } /* // obsolete void _call_back_adding_mode(GtkWidget *widget, gpointer data){ KasumiMainWindow *window = (KasumiMainWindow *)data; window->SwitchToAddingMode(); } */ void _call_back_changed_search_entry(GtkWidget *widget, gpointer data){ KasumiMainWindow *window = (KasumiMainWindow *)data; window->FindNext(true); } void _call_back_activate_search_entry(GtkWidget *widget, gpointer data){ KasumiMainWindow *window = (KasumiMainWindow *)data; window->FindNext(false); } void _call_back_clicked_column_header(GtkTreeViewColumn *column, gpointer data){ KasumiMainWindow *window = (KasumiMainWindow *)data; window->SortBy(column); } gboolean _call_back_key_pressed_text_column(GtkWidget *widget, GdkEventKey *event, gpointer data) { KasumiMainWindow *window = (KasumiMainWindow *)data; window->pressedKeyOnTextColumn(widget, event); return FALSE; } void _call_back_editing_started_sound_column(GtkCellRenderer *render, GtkCellEditable *editable, gchar *path, gpointer data) { KasumiMainWindow *window = (KasumiMainWindow *)data; window->startedEditingTextColumn(editable, string(path), SOUND); } void _call_back_edited_sound_column(GtkCellRendererText *renderer, gchar *arg1, gchar *arg2, gpointer data) { KasumiMainWindow *window = (KasumiMainWindow *)data; window->editedTextColumn(renderer, string(arg2), SOUND); } void _call_back_editing_started_spelling_column(GtkCellRenderer *render, GtkCellEditable *editable, gchar *path, gpointer data) { KasumiMainWindow *window = (KasumiMainWindow *)data; window->startedEditingTextColumn(editable, string(path), SPELLING); } void _call_back_edited_spelling_column(GtkCellRendererText *renderer, gchar *arg1, gchar *arg2, gpointer data) { KasumiMainWindow *window = (KasumiMainWindow *)data; window->editedTextColumn(renderer, string(arg2), SPELLING); } void _call_back_editing_started_freq_column(GtkCellRenderer *render, GtkCellEditable *editable, gchar *path, gpointer data) { KasumiMainWindow *window = (KasumiMainWindow *)data; window->startedEditingTextColumn(editable, string(path), FREQ); } void _call_back_edited_freq_column(GtkCellRendererText *renderer, gchar *arg1, gchar *arg2, gpointer data) { KasumiMainWindow *window = (KasumiMainWindow *)data; window->editedTextColumn(renderer, string(arg2), FREQ); } void _call_back_editing_started_wordtype_column(GtkCellRenderer *render, GtkCellEditable *editable, gchar *path, gpointer data) { KasumiMainWindow *window = (KasumiMainWindow *)data; window->startedEditingWordTypeColumn(editable, string(path)); } void _call_back_changed_wordtype_column(GtkComboBox *combo, gpointer data) { KasumiMainWindow *window = (KasumiMainWindow *)data; window->changedWordTypeColumn(combo); } guint getAccelKey(const string &key){ string::size_type i; i = key.find("+",0); string shortkey = key.substr(i+1); if(shortkey == "A") return GDK_A; else if(shortkey == "B") return GDK_B; else if(shortkey == "C") return GDK_C; else if(shortkey == "D") return GDK_D; else if(shortkey == "E") return GDK_E; else if(shortkey == "F") return GDK_F; else if(shortkey == "G") return GDK_G; else if(shortkey == "H") return GDK_H; else if(shortkey == "I") return GDK_I; else if(shortkey == "J") return GDK_J; else if(shortkey == "K") return GDK_K; else if(shortkey == "L") return GDK_L; else if(shortkey == "M") return GDK_M; else if(shortkey == "N") return GDK_N; else if(shortkey == "O") return GDK_O; else if(shortkey == "P") return GDK_P; else if(shortkey == "Q") return GDK_Q; else if(shortkey == "R") return GDK_R; else if(shortkey == "S") return GDK_S; else if(shortkey == "T") return GDK_T; else if(shortkey == "U") return GDK_U; else if(shortkey == "V") return GDK_V; else if(shortkey == "W") return GDK_W; else if(shortkey == "X") return GDK_X; else if(shortkey == "Y") return GDK_Y; else if(shortkey == "Z") return GDK_Z; else if(shortkey == "0") return GDK_0; else if(shortkey == "1") return GDK_1; else if(shortkey == "2") return GDK_2; else if(shortkey == "3") return GDK_3; else if(shortkey == "4") return GDK_4; else if(shortkey == "5") return GDK_5; else if(shortkey == "6") return GDK_5; else if(shortkey == "7") return GDK_7; else if(shortkey == "8") return GDK_8; else if(shortkey == "9") return GDK_9; cerr << "Invalid shortcut key option: " << key << endl; exit(1); } GdkModifierType getModifierType(const string &key){ string::size_type i; i = key.find("+",0); if(i == (unsigned int) key.npos){ return (GdkModifierType)0; } string mask = key.substr(0,i); if(mask == "Ctrl"){ return GDK_CONTROL_MASK; }else if(mask == "Alt"){ return GDK_MOD1_MASK; } cerr << "Invalid mask option: " << key << endl; exit(1); } gint sortFuncByFreq(GtkTreeModel *model, GtkTreeIter *a, GtkTreeIter *b, gpointer user_data){ unsigned int id_a, id_b; gtk_tree_model_get(model, a, COL_ID, &id_a, -1); gtk_tree_model_get(model, b, COL_ID, &id_b, -1); KasumiWord *word_a = KasumiWord::getWordFromID(id_a); KasumiWord *word_b = KasumiWord::getWordFromID(id_b); return word_a->getFrequency() - word_b->getFrequency(); } gint sortFuncBySound(GtkTreeModel *model, GtkTreeIter *iter_a, GtkTreeIter *iter_b, gpointer user_data){ unsigned int id_a, id_b; gtk_tree_model_get(model, iter_a, COL_ID, &id_a, -1); gtk_tree_model_get(model, iter_b, COL_ID, &id_b, -1); KasumiWord *word_a = KasumiWord::getWordFromID(id_a); KasumiWord *word_b = KasumiWord::getWordFromID(id_b); const char *str_a = word_a->getSoundByUTF8().c_str(); const char *str_b = word_b->getSoundByUTF8().c_str(); int size_a = word_a->getSound().size(); int size_b = word_b->getSound().size(); int size = (size_a < size_b) ? size_a : size_b; int i,a,b; unsigned char first_a,second_a,third_a; unsigned char first_b,second_b,third_b; // compare Hiragana string encoded in UTF8 for(i=0;i (str_a[i]); second_a = static_cast (str_a[i+1]); third_a = static_cast (str_a[i+2]); first_b = static_cast (str_b[i]); second_b = static_cast (str_b[i+1]); third_b = static_cast (str_b[i+2]); // confirm that current characters are Hiragana a = first_a * 65535 + second_a * 256 + third_a; b = first_b * 65535 + second_b * 256 + third_b; if(a != b){ return a - b; } } // one string is the beginning part of another string // compare string size return size_a - size_b; } gint sortFuncByWordClass(GtkTreeModel *model, GtkTreeIter *iter_a, GtkTreeIter *iter_b, gpointer user_data){ unsigned int id_a, id_b; gtk_tree_model_get(model, iter_a, COL_ID, &id_a, -1); gtk_tree_model_get(model, iter_b, COL_ID, &id_b, -1); KasumiWord *word_a = KasumiWord::getWordFromID(id_a); KasumiWord *word_b = KasumiWord::getWordFromID(id_b); return word_a->getWordType()->comp(word_b->getWordType()); } kasumi-2.5/config.h.in0000644000175000017500000001507411227745555011641 00000000000000/* config.h.in. Generated from configure.in by autoheader. */ /* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP systems. This function is required for `alloca.c' support on those systems. */ #undef CRAY_STACKSEG_END /* Define to 1 if using `alloca.c'. */ #undef C_ALLOCA /* Define to 1 if translation of program messages to the user's native language is requested. */ #undef ENABLE_NLS /* Define to 1 if you have `alloca', as a function or macro. */ #undef HAVE_ALLOCA /* Define to 1 if you have and it should be used (not on Ultrix). */ #undef HAVE_ALLOCA_H /* Define to 1 if you have the header file. */ #undef HAVE_ARGZ_H /* Define if the GNU dcgettext() function is already present or preinstalled. */ #undef HAVE_DCGETTEXT /* Define to 1 if you have the `feof_unlocked' function. */ #undef HAVE_FEOF_UNLOCKED /* Define to 1 if you have the `fgets_unlocked' function. */ #undef HAVE_FGETS_UNLOCKED /* Define to 1 if you have the `getcwd' function. */ #undef HAVE_GETCWD /* Define to 1 if you have the `getc_unlocked' function. */ #undef HAVE_GETC_UNLOCKED /* Define to 1 if you have the `getegid' function. */ #undef HAVE_GETEGID /* Define to 1 if you have the `geteuid' function. */ #undef HAVE_GETEUID /* Define to 1 if you have the `getgid' function. */ #undef HAVE_GETGID /* Define to 1 if you have the `getpagesize' function. */ #undef HAVE_GETPAGESIZE /* Define if the GNU gettext() function is already present or preinstalled. */ #undef HAVE_GETTEXT /* Define to 1 if you have the `getuid' function. */ #undef HAVE_GETUID /* Define if you have the iconv() function. */ #undef HAVE_ICONV /* Define if exists and doesn't clash with . */ #undef HAVE_INTTYPES_H /* Define if exists, doesn't clash with , and declares uintmax_t. */ #undef HAVE_INTTYPES_H_WITH_UINTMAX /* Define if you have and nl_langinfo(CODESET). */ #undef HAVE_LANGINFO_CODESET /* Define if your file defines LC_MESSAGES. */ #undef HAVE_LC_MESSAGES /* Define to 1 if you have the `anthy' library (-lanthy). */ #undef HAVE_LIBANTHY /* Define to 1 if you have the `anthydic' library (-lanthydic). */ #undef HAVE_LIBANTHYDIC /* Define to 1 if you have the `iconv' library (-liconv). */ #undef HAVE_LIBICONV /* Define to 1 if you have the header file. */ #undef HAVE_LIMITS_H /* Define to 1 if you have the header file. */ #undef HAVE_LOCALE_H /* Define to 1 if you have the header file. */ #undef HAVE_MALLOC_H /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the `mempcpy' function. */ #undef HAVE_MEMPCPY /* Define to 1 if you have a working `mmap' system call. */ #undef HAVE_MMAP /* Define to 1 if you have the `munmap' function. */ #undef HAVE_MUNMAP /* Define to 1 if you have the header file. */ #undef HAVE_NL_TYPES_H /* Define to 1 if you have the `putenv' function. */ #undef HAVE_PUTENV /* Define to 1 if you have the `setenv' function. */ #undef HAVE_SETENV /* Define to 1 if you have the `setlocale' function. */ #undef HAVE_SETLOCALE /* Define to 1 if you have the header file. */ #undef HAVE_STDDEF_H /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define if exists, doesn't clash with , and declares uintmax_t. */ #undef HAVE_STDINT_H_WITH_UINTMAX /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the `stpcpy' function. */ #undef HAVE_STPCPY /* Define to 1 if you have the `strcasecmp' function. */ #undef HAVE_STRCASECMP /* Define to 1 if you have the `strdup' function. */ #undef HAVE_STRDUP /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the `strtoul' function. */ #undef HAVE_STRTOUL /* Define to 1 if you have the header file. */ #undef HAVE_SYS_PARAM_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the `tsearch' function. */ #undef HAVE_TSEARCH /* Define if you have the 'uintmax_t' type in or . */ #undef HAVE_UINTMAX_T /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define if you have the unsigned long long type. */ #undef HAVE_UNSIGNED_LONG_LONG /* Define to 1 if you have the `__argz_count' function. */ #undef HAVE___ARGZ_COUNT /* Define to 1 if you have the `__argz_next' function. */ #undef HAVE___ARGZ_NEXT /* Define to 1 if you have the `__argz_stringify' function. */ #undef HAVE___ARGZ_STRINGIFY /* Define to 1 if you have the `__fsetlocking' function. */ #undef HAVE___FSETLOCKING /* Define as const if the declaration of iconv() needs const. */ #undef ICONV_CONST /* Define if integer division by zero raises signal SIGFPE. */ #undef INTDIV0_RAISES_SIGFPE /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define if exists and defines unusable PRI* macros. */ #undef PRI_MACROS_BROKEN /* If using the C implementation of alloca, define if you know the direction of stack growth for your system; otherwise it will be automatically deduced at runtime. STACK_DIRECTION > 0 => grows toward higher addresses STACK_DIRECTION < 0 => grows toward lower addresses STACK_DIRECTION = 0 => direction of growth unknown */ #undef STACK_DIRECTION /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Version number of package */ #undef VERSION /* Define to empty if `const' does not conform to ANSI C. */ #undef const /* Define to `__inline__' or `__inline' if that's what the C compiler calls it, or to nothing if 'inline' is not supported under any name. */ #ifndef __cplusplus #undef inline #endif /* Define to `long int' if does not define. */ #undef off_t /* Define to `unsigned int' if does not define. */ #undef size_t /* Define to unsigned long or unsigned long long if and don't define. */ #undef uintmax_t kasumi-2.5/config.guess0000755000175000017500000012206510142036015012110 00000000000000#! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003 Free Software Foundation, Inc. timestamp='2003-07-02' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Per Bothner . # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # # The plan is that this can be called by configure scripts if you # don't specify an explicit build system type. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit 0 ;; --version | -v ) echo "$version" ; exit 0 ;; --help | --h* | -h ) echo "$usage"; exit 0 ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; dummy=$tmp/dummy ; tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int x;" > $dummy.c ; for c in cc gcc c89 c99 ; do if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` case "${UNAME_MACHINE_ARCH}" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. case "${UNAME_MACHINE_ARCH}" in arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep __ELF__ >/dev/null then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case "${UNAME_VERSION}" in Debian*) release='-gnu' ;; *) release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit 0 ;; amiga:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; arc:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; hp300:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mac68k:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; macppc:OpenBSD:*:*) echo powerpc-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mvme68k:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mvme88k:OpenBSD:*:*) echo m88k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mvmeppc:OpenBSD:*:*) echo powerpc-unknown-openbsd${UNAME_RELEASE} exit 0 ;; pmax:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; sgi:OpenBSD:*:*) echo mipseb-unknown-openbsd${UNAME_RELEASE} exit 0 ;; sun3:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; wgrisc:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; *:OpenBSD:*:*) echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} exit 0 ;; alpha:OSF1:*:*) if test $UNAME_RELEASE = "V4.0"; then UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` fi # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") UNAME_MACHINE="alpha" ;; "EV4.5 (21064)") UNAME_MACHINE="alpha" ;; "LCA4 (21066/21068)") UNAME_MACHINE="alpha" ;; "EV5 (21164)") UNAME_MACHINE="alphaev5" ;; "EV5.6 (21164A)") UNAME_MACHINE="alphaev56" ;; "EV5.6 (21164PC)") UNAME_MACHINE="alphapca56" ;; "EV5.7 (21164PC)") UNAME_MACHINE="alphapca57" ;; "EV6 (21264)") UNAME_MACHINE="alphaev6" ;; "EV6.7 (21264A)") UNAME_MACHINE="alphaev67" ;; "EV6.8CB (21264C)") UNAME_MACHINE="alphaev68" ;; "EV6.8AL (21264B)") UNAME_MACHINE="alphaev68" ;; "EV6.8CX (21264D)") UNAME_MACHINE="alphaev68" ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE="alphaev69" ;; "EV7 (21364)") UNAME_MACHINE="alphaev7" ;; "EV7.9 (21364A)") UNAME_MACHINE="alphaev79" ;; esac # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` exit 0 ;; Alpha*:OpenVMS:*:*) echo alpha-hp-vms exit 0 ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix exit 0 ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit 0 ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit 0;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit 0 ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos exit 0 ;; *:OS/390:*:*) echo i370-ibm-openedition exit 0 ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit 0;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit 0;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit 0 ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit 0 ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 exit 0 ;; DRS?6000:UNIX_SV:4.2*:7*) case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7 && exit 0 ;; esac ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; i86pc:SunOS:5.*:*) echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit 0 ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit 0 ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} ;; sun4) echo sparc-sun-sunos${UNAME_RELEASE} ;; esac exit 0 ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit 0 ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit 0 ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit 0 ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit 0 ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} exit 0 ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} exit 0 ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit 0 ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit 0 ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit 0 ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit 0 ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit 0 ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit 0 ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c \ && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ && exit 0 echo mips-mips-riscos${UNAME_RELEASE} exit 0 ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit 0 ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax exit 0 ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax exit 0 ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit 0 ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit 0 ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit 0 ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit 0 ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ [ ${TARGET_BINARY_INTERFACE}x = x ] then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi else echo i586-dg-dgux${UNAME_RELEASE} fi exit 0 ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit 0 ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit 0 ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit 0 ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit 0 ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit 0 ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit 0 ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} exit 0 ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 echo rs6000-ibm-aix3.2.5 elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit 0 ;; *:AIX:*:[45]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit 0 ;; *:AIX:*:*) echo rs6000-ibm-aix exit 0 ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit 0 ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit 0 ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit 0 ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit 0 ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit 0 ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit 0 ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 esac ;; esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if [ ${HP_ARCH} = "hppa2.0w" ] then # avoid double evaluation of $set_cc_for_build test -n "$CC_FOR_BUILD" || eval $set_cc_for_build if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null then HP_ARCH="hppa2.0w" else HP_ARCH="hppa64" fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit 0 ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} exit 0 ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 echo unknown-hitachi-hiuxwe2 exit 0 ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit 0 ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit 0 ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit 0 ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit 0 ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit 0 ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi exit 0 ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit 0 ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit 0 ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit 0 ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit 0 ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit 0 ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit 0 ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; *:UNICOS/mp:*:*) echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit 0 ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit 0 ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit 0 ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit 0 ;; *:FreeBSD:*:*|*:GNU/FreeBSD:*:*) # Determine whether the default compiler uses glibc. eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include #if __GLIBC__ >= 2 LIBC=gnu #else LIBC= #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` # GNU/FreeBSD systems have a "k" prefix to indicate we are using # FreeBSD's kernel, but not the complete OS. case ${LIBC} in gnu) kernel_only='k' ;; esac echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} exit 0 ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit 0 ;; i*:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit 0 ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit 0 ;; x86:Interix*:[34]*) echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' exit 0 ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit 0 ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix exit 0 ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit 0 ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin exit 0 ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; *:GNU:*:*) echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit 0 ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit 0 ;; arm*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; cris:Linux:*:*) echo cris-axis-linux-gnu exit 0 ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; mips:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef mips #undef mipsel #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=mipsel #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=mips #else CPU= #endif #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 ;; mips64:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef mips64 #undef mips64el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=mips64el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=mips64 #else CPU= #endif #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu exit 0 ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-gnu exit 0 ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} exit 0 ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-gnu ;; PA8*) echo hppa2.0-unknown-linux-gnu ;; *) echo hppa-unknown-linux-gnu ;; esac exit 0 ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-gnu exit 0 ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux exit 0 ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu exit 0 ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent # problems with other programs or directories called `ld' in the path. # Set LC_ALL=C to ensure ld outputs messages in English. ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ | sed -ne '/supported targets:/!d s/[ ][ ]*/ /g s/.*supported targets: *// s/ .*// p'` case "$ld_supported_targets" in elf32-i386) TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" ;; a.out-i386-linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" exit 0 ;; coff-i386) echo "${UNAME_MACHINE}-pc-linux-gnucoff" exit 0 ;; "") # Either a pre-BFD a.out linker (linux-gnuoldld) or # one that does not give us useful --help. echo "${UNAME_MACHINE}-pc-linux-gnuoldld" exit 0 ;; esac # Determine whether the default compiler is a.out or elf eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include #ifdef __ELF__ # ifdef __GLIBC__ # if __GLIBC__ >= 2 LIBC=gnu # else LIBC=gnulibc1 # endif # else LIBC=gnulibc1 # endif #else #ifdef __INTEL_COMPILER LIBC=gnu #else LIBC=gnuaout #endif #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit 0 ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit 0 ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx exit 0 ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop exit 0 ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos exit 0 ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit 0 ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp exit 0 ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit 0 ;; i*86:*:5:[78]*) case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} exit 0 ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit 0 ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i386. echo i386-pc-msdosdjgpp exit 0 ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit 0 ;; paragon:*:*:*) echo i860-intel-osf1 exit 0 ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit 0 ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit 0 ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv exit 0 ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix exit 0 ;; M68*:*:R3V[567]*:*) test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && echo i486-ncr-sysv4.3${OS_REL} && exit 0 /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && echo i486-ncr-sysv4 && exit 0 ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit 0 ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit 0 ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit 0 ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit 0 ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit 0 ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit 0 ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit 0 ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit 0 ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit 0 ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit 0 ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit 0 ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit 0 ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit 0 ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit 0 ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit 0 ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit 0 ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit 0 ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit 0 ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit 0 ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit 0 ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit 0 ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit 0 ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit 0 ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit 0 ;; *:Darwin:*:*) case `uname -p` in *86) UNAME_PROCESSOR=i686 ;; powerpc) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit 0 ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} exit 0 ;; *:QNX:*:4*) echo i386-pc-qnx exit 0 ;; NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit 0 ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit 0 ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit 0 ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} exit 0 ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = "386"; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 exit 0 ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit 0 ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit 0 ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit 0 ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit 0 ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit 0 ;; *:ITS:*:*) echo pdp10-unknown-its exit 0 ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} exit 0 ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 eval $set_cc_for_build cat >$dummy.c < # include #endif main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (__arm) && defined (__acorn) && defined (__unix) printf ("arm-acorn-riscix"); exit (0); #endif #if defined (hp300) && !defined (hpux) printf ("m68k-hp-bsd\n"); exit (0); #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; if (version < 4) printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); else printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-pc-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) # if !defined (ultrix) # include # if defined (BSD) # if BSD == 43 printf ("vax-dec-bsd4.3\n"); exit (0); # else # if BSD == 199006 printf ("vax-dec-bsd4.3reno\n"); exit (0); # else printf ("vax-dec-bsd\n"); exit (0); # endif # endif # else printf ("vax-dec-bsd\n"); exit (0); # endif # else printf ("vax-dec-ultrix\n"); exit (0); # endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 # Apollos put the system type in the environment. test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } # Convex versions that predate uname can use getsysinfo(1) if [ -x /usr/convex/getsysinfo ] then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd exit 0 ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit 0 ;; c34*) echo c34-convex-bsd exit 0 ;; c38*) echo c38-convex-bsd exit 0 ;; c4*) echo c4-convex-bsd exit 0 ;; esac fi cat >&2 < in order to provide the needed information to handle your system. config.guess timestamp = $timestamp uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = ${UNAME_MACHINE} UNAME_RELEASE = ${UNAME_RELEASE} UNAME_SYSTEM = ${UNAME_SYSTEM} UNAME_VERSION = ${UNAME_VERSION} EOF exit 1 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: kasumi-2.5/ABOUT-NLS0000644000175000017500000011311310142036015011011 00000000000000Notes on the Free Translation Project ************************************* Free software is going international! The Free Translation Project is a way to get maintainers of free software, translators, and users all together, so that will gradually become able to speak many languages. A few packages already provide translations for their messages. If you found this `ABOUT-NLS' file inside a distribution, you may assume that the distributed package does use GNU `gettext' internally, itself available at your nearest GNU archive site. But you do _not_ need to install GNU `gettext' prior to configuring, installing or using this package with messages translated. Installers will find here some useful hints. These notes also explain how users should proceed for getting the programs to use the available translations. They tell how people wanting to contribute and work at translations should contact the appropriate team. When reporting bugs in the `intl/' directory or bugs which may be related to internationalization, you should tell about the version of `gettext' which is used. The information can be found in the `intl/VERSION' file, in internationalized packages. Quick configuration advice ========================== If you want to exploit the full power of internationalization, you should configure it using ./configure --with-included-gettext to force usage of internationalizing routines provided within this package, despite the existence of internationalizing capabilities in the operating system where this package is being installed. So far, only the `gettext' implementation in the GNU C library version 2 provides as many features (such as locale alias, message inheritance, automatic charset conversion or plural form handling) as the implementation here. It is also not possible to offer this additional functionality on top of a `catgets' implementation. Future versions of GNU `gettext' will very likely convey even more functionality. So it might be a good idea to change to GNU `gettext' as soon as possible. So you need _not_ provide this option if you are using GNU libc 2 or you have installed a recent copy of the GNU gettext package with the included `libintl'. INSTALL Matters =============== Some packages are "localizable" when properly installed; the programs they contain can be made to speak your own native language. Most such packages use GNU `gettext'. Other packages have their own ways to internationalization, predating GNU `gettext'. By default, this package will be installed to allow translation of messages. It will automatically detect whether the system already provides the GNU `gettext' functions. If not, the GNU `gettext' own library will be used. This library is wholly contained within this package, usually in the `intl/' subdirectory, so prior installation of the GNU `gettext' package is _not_ required. Installers may use special options at configuration time for changing the default behaviour. The commands: ./configure --with-included-gettext ./configure --disable-nls will respectively bypass any pre-existing `gettext' to use the internationalizing routines provided within this package, or else, _totally_ disable translation of messages. When you already have GNU `gettext' installed on your system and run configure without an option for your new package, `configure' will probably detect the previously built and installed `libintl.a' file and will decide to use this. This might be not what is desirable. You should use the more recent version of the GNU `gettext' library. I.e. if the file `intl/VERSION' shows that the library which comes with this package is more recent, you should use ./configure --with-included-gettext to prevent auto-detection. The configuration process will not test for the `catgets' function and therefore it will not be used. The reason is that even an emulation of `gettext' on top of `catgets' could not provide all the extensions of the GNU `gettext' library. Internationalized packages have usually many `po/LL.po' files, where LL gives an ISO 639 two-letter code identifying the language. Unless translations have been forbidden at `configure' time by using the `--disable-nls' switch, all available translations are installed together with the package. However, the environment variable `LINGUAS' may be set, prior to configuration, to limit the installed set. `LINGUAS' should then contain a space separated list of two-letter codes, stating which languages are allowed. Using This Package ================== As a user, if your language has been installed for this package, you only have to set the `LANG' environment variable to the appropriate `LL_CC' combination. Here `LL' is an ISO 639 two-letter language code, and `CC' is an ISO 3166 two-letter country code. For example, let's suppose that you speak German and live in Germany. At the shell prompt, merely execute `setenv LANG de_DE' (in `csh'), `export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash'). This can be done from your `.login' or `.profile' file, once and for all. You might think that the country code specification is redundant. But in fact, some languages have dialects in different countries. For example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The country code serves to distinguish the dialects. The locale naming convention of `LL_CC', with `LL' denoting the language and `CC' denoting the country, is the one use on systems based on GNU libc. On other systems, some variations of this scheme are used, such as `LL' or `LL_CC.ENCODING'. You can get the list of locales supported by your system for your country by running the command `locale -a | grep '^LL''. Not all programs have translations for all languages. By default, an English message is shown in place of a nonexistent translation. If you understand other languages, you can set up a priority list of languages. This is done through a different environment variable, called `LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG' for the purpose of message handling, but you still need to have `LANG' set to the primary language; this is required by other parts of the system libraries. For example, some Swedish users who would rather read translations in German than English for when Swedish is not available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'. In the `LANGUAGE' environment variable, but not in the `LANG' environment variable, `LL_CC' combinations can be abbreviated as `LL' to denote the language's main dialect. For example, `de' is equivalent to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT' (Portuguese as spoken in Portugal) in this context. Translating Teams ================= For the Free Translation Project to be a success, we need interested people who like their own language and write it well, and who are also able to synergize with other translators speaking the same language. Each translation team has its own mailing list. The up-to-date list of teams can be found at the Free Translation Project's homepage, `http://www.iro.umontreal.ca/contrib/po/HTML/', in the "National teams" area. If you'd like to volunteer to _work_ at translating messages, you should become a member of the translating team for your own language. The subscribing address is _not_ the same as the list itself, it has `-request' appended. For example, speakers of Swedish can send a message to `sv-request@li.org', having this message body: subscribe Keep in mind that team members are expected to participate _actively_ in translations, or at solving translational difficulties, rather than merely lurking around. If your team does not exist yet and you want to start one, or if you are unsure about what to do or how to get started, please write to `translation@iro.umontreal.ca' to reach the coordinator for all translator teams. The English team is special. It works at improving and uniformizing the terminology in use. Proven linguistic skill are praised more than programming skill, here. Available Packages ================== Languages are not equally supported in all packages. The following matrix shows the current state of internationalization, as of May 2003. The matrix shows, in regard of each package, for which languages PO files have been submitted to translation coordination, with a translation percentage of at least 50%. Ready PO files am az be bg ca cs da de el en en_GB eo es +-------------------------------------------+ a2ps | [] [] [] [] | aegis | () | anubis | | ap-utils | | bash | [] [] [] | batchelor | | bfd | [] [] | binutils | [] [] | bison | [] [] [] | bluez-pin | [] [] | clisp | | clisp | [] [] [] | coreutils | [] [] [] [] | cpio | [] [] [] | darkstat | () [] | diffutils | [] [] [] [] [] [] [] | e2fsprogs | [] [] | enscript | [] [] [] [] | error | [] [] [] [] [] | fetchmail | [] () [] [] [] [] | fileutils | [] [] [] | findutils | [] [] [] [] [] [] | flex | [] [] [] [] | gas | [] | gawk | [] [] [] [] | gcal | [] | gcc | [] [] | gettext | [] [] [] [] [] | gettext-runtime | [] [] [] [] [] | gettext-tools | [] [] | gimp-print | [] [] [] [] [] | gliv | | glunarclock | [] [] [] | gnucash | () [] | gnucash-glossary | [] () [] | gnupg | [] () [] [] [] [] | gpe-calendar | [] | gpe-conf | [] | gpe-contacts | [] | gpe-edit | | gpe-login | [] | gpe-ownerinfo | [] | gpe-sketchbook | [] | gpe-timesheet | | gpe-today | [] | gpe-todo | [] | gphoto2 | [] [] [] [] | gprof | [] [] | gpsdrive | () () () | grep | [] [] [] [] [] | gretl | [] | hello | [] [] [] [] [] [] | id-utils | [] [] | indent | [] [] [] [] | jpilot | [] [] [] [] | jwhois | [] | kbd | [] [] [] [] [] | ld | [] [] | libc | [] [] [] [] [] [] | libgpewidget | [] | libiconv | [] [] [] [] [] | lifelines | [] () | lilypond | [] | lingoteach | | lingoteach_lessons | () () | lynx | [] [] [] [] | m4 | [] [] [] [] | mailutils | [] [] | make | [] [] [] | man-db | [] () [] [] () | mysecretdiary | [] [] [] | nano | [] () [] [] [] | nano_1_0 | [] () [] [] [] | opcodes | [] [] | parted | [] [] [] [] [] | ptx | [] [] [] [] [] | python | | radius | | recode | [] [] [] [] [] [] | screem | | sed | [] [] [] [] [] | sh-utils | [] [] [] | sharutils | [] [] [] [] [] [] | sketch | [] () [] | soundtracker | [] [] [] | sp | [] | tar | [] [] [] [] | texinfo | [] [] [] [] | textutils | [] [] [] [] | tin | () () | util-linux | [] [] [] [] [] | vorbis-tools | [] [] [] | wastesedge | () | wdiff | [] [] [] [] | wget | [] [] [] [] [] [] [] | xchat | [] [] [] | xpad | | +-------------------------------------------+ am az be bg ca cs da de el en en_GB eo es 0 1 4 2 31 17 54 60 14 1 4 12 56 et fa fi fr ga gl he hr hu id it ja ko +----------------------------------------+ a2ps | [] [] [] () () | aegis | | anubis | [] | ap-utils | [] | bash | [] [] | batchelor | [] | bfd | [] [] | binutils | [] [] | bison | [] [] [] [] | bluez-pin | [] [] [] [] | clisp | | clisp | [] | coreutils | [] [] [] [] | cpio | [] [] [] [] | darkstat | () [] [] [] | diffutils | [] [] [] [] [] [] [] | e2fsprogs | | enscript | [] [] | error | [] [] [] [] | fetchmail | [] | fileutils | [] [] [] [] [] | findutils | [] [] [] [] [] [] [] [] [] [] [] | flex | [] [] | gas | [] | gawk | [] [] | gcal | [] | gcc | [] | gettext | [] [] [] | gettext-runtime | [] [] [] [] | gettext-tools | [] | gimp-print | [] [] | gliv | () | glunarclock | [] [] [] [] | gnucash | [] | gnucash-glossary | [] | gnupg | [] [] [] [] [] [] [] | gpe-calendar | [] | gpe-conf | | gpe-contacts | [] | gpe-edit | [] [] | gpe-login | [] | gpe-ownerinfo | [] [] [] | gpe-sketchbook | [] | gpe-timesheet | [] [] [] | gpe-today | [] [] | gpe-todo | [] [] | gphoto2 | [] [] [] | gprof | [] [] | gpsdrive | () [] () () | grep | [] [] [] [] [] [] [] [] [] [] [] | gretl | [] | hello | [] [] [] [] [] [] [] [] [] [] [] [] [] | id-utils | [] [] [] | indent | [] [] [] [] [] [] [] [] | jpilot | [] () | jwhois | [] [] [] [] | kbd | [] | ld | [] | libc | [] [] [] [] [] [] | libgpewidget | [] [] [] | libiconv | [] [] [] [] [] [] [] [] | lifelines | () | lilypond | [] | lingoteach | [] [] | lingoteach_lessons | | lynx | [] [] [] [] | m4 | [] [] [] [] | mailutils | | make | [] [] [] [] [] [] | man-db | [] () () | mysecretdiary | [] [] | nano | [] [] [] [] | nano_1_0 | [] [] [] [] | opcodes | [] [] | parted | [] [] [] | ptx | [] [] [] [] [] [] [] | python | | radius | | recode | [] [] [] [] [] [] | screem | | sed | [] [] [] [] [] [] [] [] | sh-utils | [] [] [] [] [] [] | sharutils | [] [] [] [] [] | sketch | [] | soundtracker | [] [] [] | sp | [] () | tar | [] [] [] [] [] [] [] [] [] | texinfo | [] [] [] [] | textutils | [] [] [] [] [] | tin | [] () | util-linux | [] [] [] [] () [] | vorbis-tools | [] | wastesedge | () | wdiff | [] [] [] [] [] | wget | [] [] [] [] [] [] [] [] | xchat | [] [] [] | xpad | | +----------------------------------------+ et fa fi fr ga gl he hr hu id it ja ko 20 1 15 73 14 24 8 10 30 31 19 31 9 lg lt lv ms nb nl nn no pl pt pt_BR ro +----------------------------------------+ a2ps | [] [] () () () [] [] | aegis | () | anubis | [] [] | ap-utils | () | bash | [] | batchelor | | bfd | | binutils | | bison | [] [] [] [] | bluez-pin | [] | clisp | | clisp | [] | coreutils | [] | cpio | [] [] [] | darkstat | [] [] [] [] | diffutils | [] [] [] | e2fsprogs | | enscript | [] [] | error | [] [] | fetchmail | () () | fileutils | [] | findutils | [] [] [] [] | flex | [] | gas | | gawk | [] | gcal | | gcc | | gettext | [] | gettext-runtime | [] | gettext-tools | | gimp-print | [] | gliv | [] | glunarclock | [] | gnucash | | gnucash-glossary | [] [] | gnupg | | gpe-calendar | [] [] | gpe-conf | [] [] | gpe-contacts | [] | gpe-edit | [] [] | gpe-login | [] [] | gpe-ownerinfo | [] [] | gpe-sketchbook | [] [] | gpe-timesheet | [] [] | gpe-today | [] [] | gpe-todo | [] [] | gphoto2 | | gprof | [] | gpsdrive | () () () | grep | [] [] [] [] | gretl | | hello | [] [] [] [] [] [] [] [] [] | id-utils | [] [] [] | indent | [] [] [] | jpilot | () () | jwhois | [] [] [] | kbd | | ld | | libc | [] [] [] [] | libgpewidget | [] [] | libiconv | [] [] | lifelines | | lilypond | [] | lingoteach | | lingoteach_lessons | | lynx | [] [] | m4 | [] [] [] [] | mailutils | | make | [] [] | man-db | [] | mysecretdiary | [] | nano | [] [] [] [] | nano_1_0 | [] [] [] [] | opcodes | [] [] [] | parted | [] [] [] | ptx | [] [] [] [] [] [] [] | python | | radius | | recode | [] [] [] | screem | | sed | [] [] | sh-utils | [] | sharutils | [] | sketch | [] | soundtracker | | sp | | tar | [] [] [] [] [] [] | texinfo | [] | textutils | [] | tin | | util-linux | [] [] | vorbis-tools | [] [] | wastesedge | | wdiff | [] [] [] [] | wget | [] [] [] | xchat | [] [] | xpad | [] | +----------------------------------------+ lg lt lv ms nb nl nn no pl pt pt_BR ro 0 0 2 11 7 26 3 4 18 15 34 34 ru sk sl sr sv ta tr uk vi wa zh_CN zh_TW +-------------------------------------------+ a2ps | [] [] [] [] [] | 16 aegis | () | 0 anubis | [] [] | 5 ap-utils | () | 1 bash | [] | 7 batchelor | | 1 bfd | [] [] [] | 7 binutils | [] [] [] | 7 bison | [] [] | 13 bluez-pin | | 7 clisp | | 0 clisp | | 5 coreutils | [] [] [] [] [] | 14 cpio | [] [] [] | 13 darkstat | [] () () | 9 diffutils | [] [] [] [] | 21 e2fsprogs | [] | 3 enscript | [] [] [] | 11 error | [] [] [] | 14 fetchmail | [] | 7 fileutils | [] [] [] [] [] [] | 15 findutils | [] [] [] [] [] [] | 27 flex | [] [] [] | 10 gas | [] | 3 gawk | [] [] | 9 gcal | [] [] | 4 gcc | [] | 4 gettext | [] [] [] [] [] [] | 15 gettext-runtime | [] [] [] [] [] [] | 16 gettext-tools | [] [] | 5 gimp-print | [] [] | 10 gliv | | 1 glunarclock | [] [] [] | 11 gnucash | [] [] | 4 gnucash-glossary | [] [] [] | 8 gnupg | [] [] [] [] | 16 gpe-calendar | [] | 5 gpe-conf | | 3 gpe-contacts | [] | 4 gpe-edit | [] | 5 gpe-login | [] | 5 gpe-ownerinfo | [] | 7 gpe-sketchbook | [] | 5 gpe-timesheet | [] | 6 gpe-today | [] | 6 gpe-todo | [] | 6 gphoto2 | [] [] | 9 gprof | [] [] | 7 gpsdrive | [] [] | 3 grep | [] [] [] [] | 24 gretl | | 2 hello | [] [] [] [] [] | 33 id-utils | [] [] [] | 11 indent | [] [] [] [] | 19 jpilot | [] [] [] [] [] | 10 jwhois | () () [] [] | 10 kbd | [] [] | 8 ld | [] [] | 5 libc | [] [] [] [] | 20 libgpewidget | | 6 libiconv | [] [] [] [] [] [] | 21 lifelines | [] | 2 lilypond | [] | 4 lingoteach | | 2 lingoteach_lessons | () | 0 lynx | [] [] [] [] | 14 m4 | [] [] [] | 15 mailutils | | 2 make | [] [] [] [] | 15 man-db | [] | 6 mysecretdiary | [] [] | 8 nano | [] [] [] | 15 nano_1_0 | [] [] [] | 15 opcodes | [] [] | 9 parted | [] [] | 13 ptx | [] [] [] | 22 python | | 0 radius | | 0 recode | [] [] [] [] | 19 screem | [] | 1 sed | [] [] [] [] [] | 20 sh-utils | [] [] [] | 13 sharutils | [] [] [] [] | 16 sketch | [] | 5 soundtracker | [] | 7 sp | [] | 3 tar | [] [] [] [] [] | 24 texinfo | [] [] [] [] | 13 textutils | [] [] [] [] [] | 15 tin | | 1 util-linux | [] [] | 14 vorbis-tools | [] | 7 wastesedge | | 0 wdiff | [] [] [] [] | 17 wget | [] [] [] [] [] [] [] | 25 xchat | [] [] [] | 11 xpad | | 1 +-------------------------------------------+ 50 teams ru sk sl sr sv ta tr uk vi wa zh_CN zh_TW 97 domains 32 19 16 0 56 0 48 10 1 1 12 23 913 Some counters in the preceding matrix are higher than the number of visible blocks let us expect. This is because a few extra PO files are used for implementing regional variants of languages, or language dialects. For a PO file in the matrix above to be effective, the package to which it applies should also have been internationalized and distributed as such by its maintainer. There might be an observable lag between the mere existence a PO file and its wide availability in a distribution. If May 2003 seems to be old, you may fetch a more recent copy of this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date matrix with full percentage details can be found at `http://www.iro.umontreal.ca/contrib/po/HTML/matrix.html'. Using `gettext' in new packages =============================== If you are writing a freely available program and want to internationalize it you are welcome to use GNU `gettext' in your package. Of course you have to respect the GNU Library General Public License which covers the use of the GNU `gettext' library. This means in particular that even non-free programs can use `libintl' as a shared library, whereas only free software can use `libintl' as a static library or use modified versions of `libintl'. Once the sources are changed appropriately and the setup can handle the use of `gettext' the only thing missing are the translations. The Free Translation Project is also available for packages which are not developed inside the GNU project. Therefore the information given above applies also for every other Free Software Project. Contact `translation@iro.umontreal.ca' to make the `.pot' files available to the translation teams. kasumi-2.5/KasumiDicEventListener.hxx0000644000175000017500000000264310711644443014715 00000000000000/********************************************************************* * * KasumiDicEventListener.hxx * * Kasumi - a management tool for a private dictionary of anthy * * Copyright (C) 2004-2006 Takashi Nakamoto * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. * *********************************************************************/ #ifndef __KASUMI_DIC_EVENT_LISTENER_HXX__ #define __KASUMI_DIC_EVENT_LISTENER_HXX__ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "KasumiWord.hxx" class KasumiDicEventListener{ private: public: virtual ~KasumiDicEventListener() {}; virtual void removedWord(unsigned int id) = 0; virtual void appendedWord(KasumiWord *word) = 0; virtual void modifiedWord(KasumiWord *word) = 0; }; #endif kasumi-2.5/COPYING0000644000175000017500000004313110144550776010640 00000000000000 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. , 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License.