klatexformula-3.2.8/000755 002161 000024 00000000000 12244200462 015343 5ustar00philippestaff000000 000000 klatexformula-3.2.8/apidoc/000755 002161 000024 00000000000 12244200462 016602 5ustar00philippestaff000000 000000 klatexformula-3.2.8/AUTHORS000644 002161 000024 00000000053 12244200462 016411 0ustar00philippestaff000000 000000 Philippe Faist klatexformula-3.2.8/cmake/000755 002161 000024 00000000000 12244200443 016422 5ustar00philippestaff000000 000000 klatexformula-3.2.8/CMakeLists.txt000644 002161 000024 00000056152 12244200462 020114 0ustar00philippestaff000000 000000 # #################################### # # CMake project file for klatexformula # # #################################### # # $Id: CMakeLists.txt 643 2011-06-09 19:47:22Z phfaist $ # #################################### # cmake_minimum_required(VERSION 2.6.4) PROJECT(klatexformula) # Set up CMAKE properly set(CMAKE_INCLUDE_CURRENT_DIR TRUE) set(CMAKE_MODULE_PATH "${CMAKE_SOURCE_DIR}/cmake") set(KLF_ROOT_CMAKE_READ TRUE CACHE INTERNAL "Can be queried to see if the root CMakeLists.txt was read") # Read project version file(READ "VERSION" klf_ver) string(STRIP "${klf_ver}" KLF_VERSION) message(STATUS "KLatexFormula Version ${KLF_VERSION}") option(KLF_WELCOME_MSG_SILENT "Don't display welcome message" OFF) if(NOT KLF_WELCOME_MSG_SILENT) message(STATUS " Welcome to the klatexformula build script. This CMake script will configure the klatexformula ${KLF_VERSION} build process for your system. Some settings will have to be detected. This script should be able to detect the correct settings for most systems. However, you may want to tune and even fine-tune this configuration in order to build and install the compenents you would like, and install them at your preferred locations. Each status message displays a default or detected value for a setting. In capital letters is given the corresponding CMake cache variable name, in case you want to change the setting. With command-line cmake, you can set a variable with: cmake -D= In most cases values are just 'ON' or 'OFF'. In some other cases they are paths. But don't worry, most default values should be fine. Unless an error was reported during this script, you can type make and sudo make install to install klatexformula on your system. For more options and help: - look at the stored cache variable documentation (displayed eg. by cmake-gui and ccmake, or directly in the CMakeCache.txt file) - take a look at http://klatexformula.sourceforge.net/klfwiki/index.php/User_Manual:Downloading_%26_Installing And have a lot of fun! ") message(STATUS "Displayed welcome message (KLF_WELCOME_MSG_SILENT)") else(NOT KLF_WELCOME_MSG_SILENT) message(STATUS "Skipped welcome message (KLF_WELCOME_MSG_SILENT)") endif(NOT KLF_WELCOME_MSG_SILENT) # Extract KLF Version from VERSION file set(klfversion_regex "([0-9]+)\\.([0-9]+)\\.([0-9]+)(.*)") string(REGEX REPLACE "${klfversion_regex}" "\\1" KLF_VERSION_MAJ "${KLF_VERSION}") string(REGEX REPLACE "${klfversion_regex}" "\\2" KLF_VERSION_MIN "${KLF_VERSION}") string(REGEX REPLACE "${klfversion_regex}" "\\3" KLF_VERSION_REL "${KLF_VERSION}") string(REGEX REPLACE "${klfversion_regex}" "\\4" KLF_VERSION_SUFFIX "${KLF_VERSION}") # The version that the libraries will be tagged with set(KLF_LIB_VERSION "${KLF_VERSION_MAJ}.${KLF_VERSION_MIN}") include(KLFUtil) # Set some project settings # ------------------------- message(STATUS "") message(STATUS "[BUILD SETTINGS]") KLFGetCMakeVarChanged(CMAKE_BUILD_TYPE) set(CMAKE_BUILD_TYPE "Release" CACHE STRING "(FOR DEVELOPERS:) Build configuration (Debug|Release)") mark_as_advanced(CLEAR CMAKE_BUILD_TYPE) if(NOT CMAKE_BUILD_TYPE AND klf_first_CMAKE_BUILD_TYPE) # force to "Release" the first time if empty set(CMAKE_BUILD_TYPE "Release" CACHE STRING "(FOR DEVELOPERS:) Build configuration (Debug|Release)" FORCE) endif(NOT CMAKE_BUILD_TYPE AND klf_first_CMAKE_BUILD_TYPE) message(STATUS "Build Type: ${CMAKE_BUILD_TYPE} (CMAKE_BUILD_TYPE)") KLFCMakeSetVarChanged(CMAKE_BUILD_TYPE) if(CMAKE_BUILD_TYPE STREQUAL "Debug") set(default_klf_debug TRUE) else(CMAKE_BUILD_TYPE STREQUAL "Debug") set(default_klf_debug FALSE) endif(CMAKE_BUILD_TYPE STREQUAL "Debug") #KLFDeclareCacheVarOptionFollowComplex1(specificoption cachetype cachestring updatenotice calcoptvalue depvar1) KLFDeclareCacheVarOptionFollowComplex1(KLF_DEBUG BOOL "Enable debugging messages" # cache ON # updatenotice enabled "${default_klf_debug}" # (possibly new) calculated value CMAKE_BUILD_TYPE # dependency variable ) if(KLF_DEBUG) message(STATUS "Enabling debugging messages (KLF_DEBUG)") endif(KLF_DEBUG) if(WIN32) set(klf_default_debug_postfix "d") elseif(APPLE) set(klf_default_debug_postfix "_debug") else(WIN32) set(klf_default_debug_postfix "") endif(WIN32) set(CMAKE_DEBUG_POSTFIX "${klf_default_debug_postfix}" CACHE STRING "Suffix to add to target names when built in 'Debug' build configuration") mark_as_advanced(CMAKE_DEBUG_POSTFIX) # Choose a Qt Version to use set(KLF_QT_VERSION 4 CACHE STRING "Qt major version to build with (4 or 3)") KLFGetCMakeVarChanged(KLF_QT_VERSION) if(NOT KLF_QT_VERSION STREQUAL "3" AND NOT KLF_QT_VERSION STREQUAL "4") KLFNote("KLF_QT_VERSION has to be \"3\" (for Qt 3) or \"4\" (for Qt 4) (major version number)") message(FATAL_ERROR "Invalid value for KLF_QT_VERSION") endif(NOT KLF_QT_VERSION STREQUAL "3" AND NOT KLF_QT_VERSION STREQUAL "4") if(klf_changed_KLF_QT_VERSION) # the KLF_QT_VERSION variable has changed value # -> Reset some variables to let FindQt() find the right qmake and other executables (eg. moc) unset(QT_INCLUDE_DIR CACHE) unset(QT_INCLUDE_DIR) unset(QT_LIBRARIES CACHE) unset(QT_LIBRARIES) unset(QT_DEFINITIONS CACHE) unset(QT_DEFINITIONS) unset(QT_FOUND CACHE) unset(QT_FOUND) unset(QT_MOC_EXECUTABLE CACHE) unset(QT_MOC_EXECUTABLE) unset(QT_UIC_EXECUTABLE CACHE) unset(QT_UIC_EXECUTABLE) unset(QT_QT_LIBRARY CACHE) unset(QT_QT_LIBRARY) unset(QT_QMAKE_EXECUTABLE CACHE) unset(QT_QMAKE_EXECUTABLE) unset(QT3_QGLOBAL_H_FILE CACHE) unset(QT3_QGLOBAL_H_FILE) endif(klf_changed_KLF_QT_VERSION) KLFMarkVarAdvancedIf(QT_QMAKE_EXECUTABLE "NOT KLF_QT_VERSION EQUAL 4") # and set KLF_USE_QT4 (internal to us, mirror of KLF_QT_VERSION==4) if(KLF_QT_VERSION EQUAL 3) set(KLF_USE_QT4 FALSE CACHE INTERNAL "TRUE if klatexformula is compiled with Qt4 (reflects KLF_QT_VERSION)") else(KLF_QT_VERSION EQUAL 3) set(KLF_USE_QT4 TRUE CACHE INTERNAL "TRUE if klatexformula is compiled with Qt4 (reflects KLF_QT_VERSION)") endif(KLF_QT_VERSION EQUAL 3) # see if user specified a QT_QMAKE_EXECUTABLE and set QT_QMAKE_EXECUTABLE_FINDQT too (FindQt4 bug?) if(QT_QMAKE_EXECUTABLE AND NOT QT_QMAKE_EXECUTABLE_FINDQT) set(QT_QMAKE_EXECUTABLE_FINDQT "${QT_QMAKE_EXECUTABLE}" CACHE STRING "Qt QMake executable path" FORCE) endif(QT_QMAKE_EXECUTABLE AND NOT QT_QMAKE_EXECUTABLE_FINDQT) # Include that version of Qt set(QT_REQUIRED TRUE CACHE INTERNAL "Qt required.") set(DESIRED_QT_VERSION "${KLF_QT_VERSION}" CACHE INTERNAL "FindQt's Qt Version to use") set(QT4_INSTALLED) set(QT3_INSTALLED) mark_as_advanced(QT_REQUIRED DESIRED_QT_VERSION QT3_INSTALLED QT4_INSTALLED) KLFCMakeDebug("QT3_QGLOBAL_H_FILE is ${QT3_QGLOBAL_H_FILE}") include(FindQt) if(NOT QT4_INSTALLED AND NOT QT3_INSTALLED) mark_as_advanced(CLEAR QT_QMAKE_EXECUTABLE) message(FATAL_ERROR "Didn't find Qt${KLF_QT_VERSION}. Try setting the QT_QMAKE_EXECUTABLE (and/or QT_QMAKE_EXECUTABLE_FINDQT) cache variable(s)." ) endif() if(KLF_QT_VERSION EQUAL 3 AND NOT QT3_INSTALLED) mark_as_advanced(CLEAR QT_QMAKE_EXECUTABLE) message(FATAL_ERROR "Didn't find required Qt3. You may try setting QT_QMAKE_EXECUTABLE or using Qt4 by chaning the KLF_QT_VERSION cache variable.") endif(KLF_QT_VERSION EQUAL 3 AND NOT QT3_INSTALLED) if(KLF_QT_VERSION EQUAL 4 AND NOT QT4_INSTALLED) mark_as_advanced(CLEAR QT_QMAKE_EXECUTABLE) message(FATAL_ERROR "Didn't find required Qt4. You may try setting QT_QMAKE_EXECUTABLE or using Qt3 by chaning the KLF_QT_VERSION cache variable.") endif(KLF_QT_VERSION EQUAL 4 AND NOT QT4_INSTALLED) message(STATUS "Using Qt ${KLF_QT_VERSION} (KLF_QT_VERSION=\"${KLF_QT_VERSION}\")") # variables that FindQt obviously forgets to set to advanced mark_as_advanced(QT_QTMOTIF_INCLUDE_DIR QT_QTMOTIF_LIBRARY_DEBUG QT_QTMOTIF_LIBRARY_RELEASE) if(WIN32) mark_as_advanced(CLEAR QT_QMAKE_EXECUTABLE_FINDQT) endif(WIN32) #KLFDeclareCacheVarOptionCondition(specificoption cachetype cachestring updatenoticestring condition forcedvalue defaultvalue) KLFDeclareCacheVarOptionCondition(KLF_BUILD_TOOLS BOOL "Build klatexformula tools library (klftools), requires Qt4" # cache info "Building klftools library requires Qt 4. Not building klftools library." # update notify message KLF_USE_QT4 # the condition OFF # the forced value if condition is not met ${KLF_USE_QT4} # the default value at beginning ) if(KLF_BUILD_TOOLS) message(STATUS "Will build the klftools library (KLF_BUILD_TOOLS)") else(KLF_BUILD_TOOLS) message(STATUS "Will not build the klftools library (KLF_BUILD_TOOLS)") endif(KLF_BUILD_TOOLS) #KLFDeclareCacheVarOptionCondition(spec.option cachetype cachestr updatemsg cond. forceval def.val.) KLFDeclareCacheVarOptionCondition(KLF_BUILD_GUI BOOL "Build klatexformula GUI (klfapp+klatexformula), requires Qt4 and klftools" # cache info "Building klatexformula GUI requires Qt 4 and klftools libraries. Not building GUI." # notify message "KLF_USE_QT4 AND KLF_BUILD_TOOLS" # the condition OFF # the forced value if condition is not met ${KLF_BUILD_TOOLS} # the default value at beginning (here this is a boolean) ) if(KLF_BUILD_GUI) message(STATUS "Will build the GUI interface (klatexformula, klfapp) (KLF_BUILD_GUI)") else(KLF_BUILD_GUI) message(STATUS "Will not build the GUI interface (klatexformula, klfapp) (KLF_BUILD_GUI)") endif(KLF_BUILD_GUI) #KLFDeclareCacheVarOptionCondition(spec.option cachetype cachestr updatemsg cond. forceval def.val.) KLFDeclareCacheVarOptionCondition(KLF_BUILD_PLUGINS BOOL "Build klatexformula plugins; requires Qt4, klftools and GUI" # cache info "Building klatexformula plugins requires klatexformula GUI. Not building plugins." # notify message "KLF_BUILD_GUI" # the condition (GUI depends on klftools and Qt4) OFF # the forced value if condition is not met ${KLF_BUILD_GUI} # the default value at beginning (here this is a boolean) ) if(KLF_BUILD_PLUGINS) message(STATUS "Will build klatexformula plugins (KLF_BUILD_PLUGINS)") else(KLF_BUILD_PLUGINS) message(STATUS "Will not build klatexformula plugins (KLF_BUILD_PLUGINS)") endif(KLF_BUILD_PLUGINS) # Static/Shared libklfbackend set(default_library_static FALSE) if(WIN32 OR APPLE) set(default_library_static FALSE) else(WIN32 OR APPLE) # linux systems. # Note that plugins can locate symbols in the binary and will compile with undefined # references, so it's ok set(default_library_static TRUE) endif(WIN32 OR APPLE) option(KLF_LIBKLFBACKEND_STATIC "Compile static libklfbackend backend library instead of shared." ${default_library_static}) # status message if(KLF_LIBKLFBACKEND_STATIC) message(STATUS "Building a static KLFBackend library (KLF_LIBKLFBACKEND_STATIC)") else(KLF_LIBKLFBACKEND_STATIC) message(STATUS "Building a shared KLFBackend library (KLF_LIBKLFBACKEND_STATIC)") endif(KLF_LIBKLFBACKEND_STATIC) # Build a shared or static klftools library set(KLF_LIBKLFTOOLS_STATIC ${default_library_static} CACHE BOOL "Build a static klftools library") # and status message if(KLF_BUILD_TOOLS) if(KLF_LIBKLFTOOLS_STATIC) message(STATUS "Building a static KLatexFormula tools library (klftools) (KLF_LIBKLFTOOLS_STATIC)") else(KLF_LIBKLFTOOLS_STATIC) message(STATUS "Building a shared KLatexFormula tools library (klftools) (KLF_LIBKLFTOOLS_STATIC)") endif(KLF_LIBKLFTOOLS_STATIC) endif(KLF_BUILD_TOOLS) # Build a shared or static source klfapp library (for plugins to link to) set(KLF_LIBKLFAPP_STATIC ${default_library_static} CACHE BOOL "Build a static klfapp library") # and status message if(KLF_BUILD_GUI) if(KLF_LIBKLFAPP_STATIC) message(STATUS "Building a static KLatexFormula klfapp library (KLF_LIBKLFAPP_STATIC)") else(KLF_LIBKLFAPP_STATIC) message(STATUS "Building a shared KLatexFormula klfapp library (KLF_LIBKLFAPP_STATIC)") endif(KLF_LIBKLFAPP_STATIC) endif(KLF_BUILD_GUI) # Target architecture (allows compile for 32-bit on 64-bit architectures) KLFGetCMakeVarChanged(KLF_TARGET_ARCH_64) # detect changes, for KLF_LIB_SUFFIX later on if(CMAKE_SIZEOF_VOID_P EQUAL 8) set(klf_host_arch_64 TRUE) else(CMAKE_SIZEOF_VOID_P EQUAL 8) set(klf_host_arch_64 FALSE) endif(CMAKE_SIZEOF_VOID_P EQUAL 8) set(KLF_TARGET_ARCH_64 ${klf_host_arch_64} CACHE BOOL "Configure build for 64-bit arch") if(KLF_TARGET_ARCH_64) message(STATUS "Compiling for 64-bit architecture (KLF_TARGET_ARCH_64=ON/OFF)") else(KLF_TARGET_ARCH_64) message(STATUS "Compiling for 32-bit architecture (KLF_TARGET_ARCH_64=ON/OFF)") endif(KLF_TARGET_ARCH_64) KLFCMakeSetVarChanged(KLF_TARGET_ARCH_64) KLFGetCMakeVarChanged(KLF_ARCH_FLAGS) set(the_arch_flags "") if(KLF_TARGET_ARCH_64) if(klf_host_arch_64) set(the_arch_flags "") else(klf_host_arch_64) set(the_arch_flags "-m64") endif(klf_host_arch_64) else(KLF_TARGET_ARCH_64) if(klf_host_arch_64) set(the_arch_flags "-m32") else(klf_host_arch_64) set(the_arch_flags "") endif(klf_host_arch_64) endif(KLF_TARGET_ARCH_64) #KLFDeclareCacheVarOptionFollowComplexN(specificoption cachetype cachestring updatenotice calcoptvalue depvarlist) KLFDeclareCacheVarOptionFollowComplexN(KLF_ARCH_FLAGS STRING "Additional architecture flags for gcc" TRUE # updatenotice "${the_arch_flags}" # calcoptvalue "KLF_TARGET_ARCH_64" # depvarlist ) set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${KLF_ARCH_FLAGS}") if(KLF_ARCH_FLAGS) message(STATUS "Additional architecture flags for gcc: ${KLF_ARCH_FLAGS} (KLF_ARCH_FLAGS)") endif(KLF_ARCH_FLAGS) KLFGetCMakeVarChanged(KLF_LIB_SUFFIX) # Also used later in klfinstallpaths.cmake # Guess lib dir suffix on linux/unix if(UNIX) execute_process(COMMAND test -d /lib64 -a ! -L /lib64 RESULT_VARIABLE nothavelib64) if(NOT nothavelib64 AND KLF_TARGET_ARCH_64) set(wantlib64 TRUE) else(NOT nothavelib64 AND KLF_TARGET_ARCH_64) set(wantlib64 FALSE) endif(NOT nothavelib64 AND KLF_TARGET_ARCH_64) execute_process(COMMAND test -d /lib32 -a ! -L /lib32 RESULT_VARIABLE nothavelib32) if(NOT nothavelib32 AND NOT KLF_TARGET_ARCH_64) set(wantlib32 TRUE) else(NOT nothavelib32 AND NOT KLF_TARGET_ARCH_64) set(wantlib32 FALSE) endif(NOT nothavelib32 AND NOT KLF_TARGET_ARCH_64) if(klf_first_KLF_TARGET_ARCH_64 OR klf_changed_KLF_TARGET_ARCH_64 OR klf_updated_KLF_TARGET_ARCH_64) # KLF_TARGET_ARCH_64 changed, update KLF_LIB_SUFFIX if(wantlib64) set(NEW_KLF_LIB_SUFFIX "64") elseif(wantlib32) set(NEW_KLF_LIB_SUFFIX "32") else(wantlib64) set(NEW_KLF_LIB_SUFFIX "") endif(wantlib64) if(DEFINED KLF_LIB_SUFFIX) set(klf_lib_suffix_redefined TRUE) endif(DEFINED KLF_LIB_SUFFIX) if(KLF_LIB_SUFFIX STREQUAL NEW_KLF_LIB_SUFFIX) else(KLF_LIB_SUFFIX STREQUAL NEW_KLF_LIB_SUFFIX) set(KLF_LIB_SUFFIX ${NEW_KLF_LIB_SUFFIX} CACHE STRING "Suffix to library directory (eg. '64' for '/usr/lib64')" FORCE) set(klf_updated_KLF_LIB_SUFFIX TRUE) # we updated this variable's value if(klf_lib_suffix_redefined) KLFNote("The library suffix was detected and adjusted to \"${KLF_LIB_SUFFIX}\".") endif(klf_lib_suffix_redefined) endif(KLF_LIB_SUFFIX STREQUAL NEW_KLF_LIB_SUFFIX) else(klf_first_KLF_TARGET_ARCH_64 OR klf_changed_KLF_TARGET_ARCH_64 OR klf_updated_KLF_TARGET_ARCH_64) # no change endif(klf_first_KLF_TARGET_ARCH_64 OR klf_changed_KLF_TARGET_ARCH_64 OR klf_updated_KLF_TARGET_ARCH_64) message(STATUS "Using \"${KLF_LIB_SUFFIX}\" as library directory suffix (KLF_LIB_SUFFIX)") endif(UNIX) KLFCMakeSetVarChanged(KLF_LIB_SUFFIX) # Mac OS X: building frameworks + bundles ? if(APPLE) option(KLF_MACOSX_BUNDLES "On Mac OS X: Build Bundles and Frameworks instead of UNIX-Style binaries" ON) endif(APPLE) # Build DBUS support ? if(NOT WIN32) set(KLF_USE_DBUS ON CACHE BOOL "Compiles D-Bus support into KLatexFormula GUI") else(NOT WIN32) set(KLF_USE_DBUS OFF CACHE BOOL "Compiles D-Bus support into KLatexFormula GUI") endif(NOT WIN32) if(KLF_USE_DBUS) message(STATUS "Building with D-BUS support (KLF_USE_DBUS)") else(KLF_USE_DBUS) message(STATUS "Building without D-BUS support (KLF_USE_DBUS)") endif(KLF_USE_DBUS) # DEVELOPER OPTION to install klfbaseplugins.rcc in ~/.klatexformula/rccresources option(KLF_DEVEL_LOCAL_BASEPLUGINS_COPY "FOR DEVELOPERS ONLY. Installs klfbaseplugins.rcc in ~/.klatexformula/rccresources AT COMPILE-TIME." FALSE) # DEVELOPER OPTION to test QAbstractItemModel-based models with ModelTest option(KLF_DEBUG_USE_MODELTEST "DEVELOPERS ONLY. Uses ModelTest (Qt's Labs) to test QAbstractItemModel-based models. VERY slow." FALSE) mark_as_advanced(KLF_DEVEL_LOCAL_BASEPLUGINS_COPY KLF_DEBUG_USE_MODELTEST) if(KLF_DEVEL_LOCAL_BASEPLUGINS_COPY) message(STATUS "Will install klfbaseplugins.rcc in ~/.klatexformula/rccresources at compile-time (KLF_DEVEL_LOCAL_BASEPLUGINS_COPY)") endif(KLF_DEVEL_LOCAL_BASEPLUGINS_COPY) if(KLF_DEBUG_USE_MODELTEST) message(STATUS "Will compile with QtLab's ModelTest for KLFLibModel testing (KLF_DEBUG_USE_MODELTEST)") endif(KLF_DEBUG_USE_MODELTEST) # Include some extra data files/fonts into KLatexFormula KLFGetCMakeVarChanged(KLF_INCLUDE_FONTS) set(KLF_INCLUDE_FONTS "data/cmunsi.otf;data/cmunso.otf;data/cmunss.otf;data/cmunsx.otf" CACHE STRING "Include some extra fonts into KLF's internal resources (absolute or relative to src/)") message(STATUS "Will include fonts into klatexformula's resources: \"${KLF_INCLUDE_FONTS}\" (KLF_INCLUDE_FONTS)") mark_as_advanced(KLF_INCLUDE_FONTS) KLFCMakeSetVarChanged(KLF_INCLUDE_FONTS) # Use system font rather than CMU font if available #KLFDeclareCacheVarOptionFollowComplexN(specificoption cachetype cachestring updatenotice calcoptvalue depvarlist) KLFDeclareCacheVarOptionFollowComplexN(KLF_NO_CMU_FONT BOOL "Tells klatexformula to use system font instead of Computer Modern font" TRUE # updatenotice OFF # calcoptvalue "" # depvarlist ) if(KLF_NO_CMU_FONT) message(STATUS "Will use system font instead of CMU font (KLF_NO_CMU_FONT)") else(KLF_NO_CMU_FONT) message(STATUS "Will attempt to use Computer Modern unicode font (KLF_NO_CMU_FONT)") endif(KLF_NO_CMU_FONT) # Current System OS if(APPLE) set(internal_KLF_CMAKE_OS "macosx") elseif(WIN32) set(internal_KLF_CMAKE_OS "win32") elseif(UNIX) set(internal_KLF_CMAKE_OS "linux") else(APPLE) set(internal_KLF_CMAKE_OS "unknown") endif(APPLE) set(KLF_CMAKE_OS "${internal_KLF_CMAKE_OS}" CACHE INTERNAL "Current Build OS") # Current System Arch set(internal_KLF_CMAKE_ARCH "${CMAKE_SYSTEM_PROCESSOR}") if(CMAKE_SYSTEM_PROCESSOR MATCHES "^i.86$") set(internal_KLF_CMAKE_ARCH "x86") endif(CMAKE_SYSTEM_PROCESSOR MATCHES "^i.86$") if(NOT KLF_TARGET_ARCH_64 AND CMAKE_SYSTEM_PROCESSOR EQUAL "x86_64") set(internal_KLF_CMAKE_ARCH "x86") # we are building for x86 endif(NOT KLF_TARGET_ARCH_64 AND CMAKE_SYSTEM_PROCESSOR EQUAL "x86_64") set(KLF_CMAKE_ARCH "${internal_KLF_CMAKE_ARCH}" CACHE INTERNAL "Current Build Processor Arch") # Find KDE4 for KTextEditor Plugin if(KLF_USE_QT4) if(UNIX AND NOT APPLE) set(KLF_BUILD_KTEXTEDITORPLUGIN ON CACHE BOOL "Build the KTextEditor plugin") else(UNIX AND NOT APPLE) set(KLF_BUILD_KTEXTEDITORPLUGIN OFF CACHE BOOL "Build the KTextEditor Plugin") endif(UNIX AND NOT APPLE) if(KLF_BUILD_KTEXTEDITORPLUGIN) message(STATUS "Will build KTextEditor plugin (KLF_BUILD_KTEXTEDITORPLUGIN)") else(KLF_BUILD_KTEXTEDITORPLUGIN) message(STATUS "Will NOT build KTextEditor plugin (KLF_BUILD_KTEXTEDITORPLUGIN)") endif(KLF_BUILD_KTEXTEDITORPLUGIN) else(KLF_USE_QT4) if(KLF_BUILD_KTEXTEDITORPLUGIN) set(KLF_BUILD_KTEXTEDITORPLUGIN OFF CACHE BOOL "Build the KTextEditor Plugin" FORCE) KLFNote("Not building the KTextEditor plugin because we're using Qt3.") endif(KLF_BUILD_KTEXTEDITORPLUGIN) endif(KLF_USE_QT4) # some additional variables that get shown in some versions of CMake that could be hidden mark_as_advanced( EXECUTABLE_OUTPUT_PATH LIBRARY_OUTPUT_PATH CMAKE_BACKWARDS_COMPATIBILITY LIB_SUFFIX ) # Manpage generation from --help and --version help text if(NOT KLF_MACOSX_BUNDLES) if(NOT DEFINED HELP2MAN OR HELP2MAN STREQUAL "") find_program(HELP2MAN "help2man") endif(NOT DEFINED HELP2MAN OR HELP2MAN STREQUAL "") endif(NOT KLF_MACOSX_BUNDLES) if(HELP2MAN) message(STATUS "Manpage will be generated from --help text with help2man (HELP2MAN=OFF or /path/to/help2man)") elseif(NOT KLF_MACOSX_BUNDLES AND NOT WIN32 AND HELP2MAN STREQUAL "") KLFNote("help2man was not found. Manpage will not be generated. set explicitely HELP2MAN to /path/.../to/help2man if needed.") endif(HELP2MAN) if(NOT HELP2MAN) message(STATUS "Manpage will not be generated with help2man (HELP2MAN=OFF or /path/to/help2man)") endif(NOT HELP2MAN) if(NOT DEFINED GZIP OR GZIP STREQUAL "") find_program(GZIP "gzip") endif(NOT DEFINED GZIP OR GZIP STREQUAL "") if(HELP2MAN) if(GZIP) message(STATUS "Manpage will be gzip'ed (GZIP=OFF or /path/to/gzip)") else(GZIP) message(STATUS "Manpage will not be gzip'ed (GZIP=OFF or /path/to/gzip)") endif(GZIP) endif(HELP2MAN) # Install Paths # ------------- message(STATUS "") message(STATUS "[INSTALLATION SETTINGS]") include(klfinstallpaths) if(KLF_MACOSX_BUNDLES) set(default_KLF_BUNDLE_QT_PLUGINS imageformats/libqgif.dylib imageformats/libqico.dylib imageformats/libqjpeg.dylib imageformats/libqmng.dylib imageformats/libqtiff.dylib codecs/libqcncodecs.dylib codecs/libqjpcodecs.dylib codecs/libqkrcodecs.dylib codecs/libqtwcodecs.dylib sqldrivers/libqsqlite.dylib sqldrivers/libqsqlodbc.dylib) set(KLF_BUNDLE_QT_PLUGINS "${default_KLF_BUNDLE_QT_PLUGINS}" CACHE STRING "Qt plugins to incorporate into Mac bundle") string(REGEX REPLACE ";" " * " klf_display_bundle_qt_plugins "${KLF_BUNDLE_QT_PLUGINS}") message(STATUS "Will Package Qt Plugins in bundle * ${klf_display_bundle_qt_plugins} (KLF_BUNDLE_QT_PLUGINS)") endif(KLF_MACOSX_BUNDLES) # CPack # ----- include(klfcpack) # Some Basic Compilation Definitions # ---------------------------------- # Preprocessor instructions add_definitions(-DKLF_VERSION_STRING="${KLF_VERSION}" -DKLF_VERSION_MAJ=${KLF_VERSION_MAJ} -DKLF_VERSION_MIN=${KLF_VERSION_MIN} -DKLF_VERSION_REL=${KLF_VERSION_REL} -DKLF_SRC_BUILD -DKLF_CMAKE_ARCH="${KLF_CMAKE_ARCH}") if(KLF_USE_QT4) add_definitions(-DKLFBACKEND_QT4) endif(KLF_USE_QT4) # Add flags for DEBUG build configuration set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} -Wall -Wextra -Wformat=2 -Wno-format-extra-args -Winit-self") if(KLF_DEBUG) add_definitions(-DKLF_DEBUG) else(KLF_DEBUG) # Instruct Qt to ignore qDebug() for RELEASE build configuration (if not KLF_DEBUG) set(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} -DQT_NO_DEBUG_OUTPUT") endif(KLF_DEBUG) # Main subdirectory with all sources # ---------------------------------- add_subdirectory(src) # Build KDE KTextEditor Plugin # This can't be called from src/CMakeLists.txt because the ktexteditor plugin can # be build with just klfbackend and no gui. if(KLF_BUILD_KTEXTEDITORPLUGIN) add_subdirectory(src/klfkateplugin) endif(KLF_BUILD_KTEXTEDITORPLUGIN) message(STATUS "") message(STATUS "[ADDITIONAL SETTINGS]") # Doxygen # ------- include(klfdoxygen) message(STATUS "") message(STATUS "[DONE]") KLFNotifyNotices() message(STATUS "") klatexformula-3.2.8/CMUFONTS_COPYING000644 002161 000024 00000004410 12244200462 017713 0ustar00philippestaff000000 000000 This klatexformula source tarball contains fonts (Computer Modern Unicode Fonts in otf format) provided by Andrey V. Panov. Here is the original copyright notice: X11 License ----------- Andrey V. Panov (C) 2005 All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the above copyright notice(s) and this permission notice appear in supporting documentation. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder. -------------------------------------------------------------------------------- As a special exception, if you create a document which uses these fonts, and embed these fonts or unaltered portions of these fonts into the document, these fonts does not by itself cause the resulting document to be covered by the X11 License. This exception does not however invalidate any other reasons why the document might be covered by the X11 License. If you modify these fonts, you may extend this exception to your version of the fonts, but you are not obligated to do so. If you do not wish to do so, delete this exception statement from your version. klatexformula-3.2.8/COPYING000644 002161 000024 00000043131 12244200462 016400 0ustar00philippestaff000000 000000 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. , 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License. klatexformula-3.2.8/COPYING.txt000644 002161 000024 00000043131 12244200462 017216 0ustar00philippestaff000000 000000 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. , 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License. klatexformula-3.2.8/descr_long.txt000644 002161 000024 00000000672 12244200462 020230 0ustar00philippestaff000000 000000 KLatexFormula is an easy-to-use graphical user interface for generating images from LaTeX equations. These images can be dragged and dropped or copied and pasted into external applications (presentations, text documents, graphics...), or can be saved to disk in a variety of formats (PNG, JPG, BMP, EPS, PDF, etc.). In addition to the graphical user interface, a command-line interface and a C++ library is provided to perform the same job. klatexformula-3.2.8/descr_short.txt000644 002161 000024 00000000403 12244200462 020420 0ustar00philippestaff000000 000000 KLatexFormula is an easy-to-use graphical application for generating images from LaTeX equations. KLatexFormula is an easy-to-use graphical application for generating images (that you can drag and drop, copy and paste or save to disk) from LaTeX equations. klatexformula-3.2.8/Doxyfile.klfapp.in000644 002161 000024 00000026554 12244200462 020746 0ustar00philippestaff000000 000000 # Doxyfile 1.5.6 #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- DOXYFILE_ENCODING = UTF-8 PROJECT_NAME = "KLatexFormula Application Library" PROJECT_NUMBER = @KLF_VERSION@ OUTPUT_DIRECTORY = @KLF_APIDOC_DIR@@KLF_DOXYGEN_SF@/klfapp CREATE_SUBDIRS = NO OUTPUT_LANGUAGE = English BRIEF_MEMBER_DESC = YES REPEAT_BRIEF = YES ABBREVIATE_BRIEF = "The $name class" \ "The $name widget" \ "The $name file" \ is \ provides \ specifies \ contains \ represents \ a \ an \ the ALWAYS_DETAILED_SEC = NO INLINE_INHERITED_MEMB = NO FULL_PATH_NAMES = YES STRIP_FROM_PATH = STRIP_FROM_INC_PATH = SHORT_NAMES = NO JAVADOC_AUTOBRIEF = NO QT_AUTOBRIEF = NO MULTILINE_CPP_IS_BRIEF = NO INHERIT_DOCS = NO SEPARATE_MEMBER_PAGES = NO TAB_SIZE = 8 ALIASES = OPTIMIZE_OUTPUT_FOR_C = NO OPTIMIZE_OUTPUT_JAVA = NO OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO SUBGROUPING = YES TYPEDEF_HIDES_STRUCT = NO #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- EXTRACT_ALL = YES EXTRACT_PRIVATE = NO EXTRACT_STATIC = YES EXTRACT_LOCAL_CLASSES = YES EXTRACT_LOCAL_METHODS = NO EXTRACT_ANON_NSPACES = NO HIDE_UNDOC_MEMBERS = NO HIDE_UNDOC_CLASSES = NO HIDE_FRIEND_COMPOUNDS = YES HIDE_IN_BODY_DOCS = NO INTERNAL_DOCS = YES CASE_SENSE_NAMES = YES HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES INLINE_INFO = YES SORT_MEMBER_DOCS = YES SORT_BRIEF_DOCS = NO SORT_GROUP_NAMES = NO SORT_BY_SCOPE_NAME = NO GENERATE_TODOLIST = YES GENERATE_TESTLIST = YES GENERATE_BUGLIST = YES GENERATE_DEPRECATEDLIST= YES ENABLED_SECTIONS = MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES SHOW_DIRECTORIES = NO SHOW_FILES = YES SHOW_NAMESPACES = YES FILE_VERSION_FILTER = #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- QUIET = NO WARNINGS = YES WARN_IF_UNDOCUMENTED = YES WARN_IF_DOC_ERROR = YES WARN_NO_PARAMDOC = NO WARN_FORMAT = "$file:$line: $text" WARN_LOGFILE = #--------------------------------------------------------------------------- # configuration options related to the input files #--------------------------------------------------------------------------- INPUT = src/ INPUT_ENCODING = UTF-8 FILE_PATTERNS = *.c \ *.cc \ *.cxx \ *.cpp \ *.c++ \ *.d \ *.java \ *.ii \ *.ixx \ *.ipp \ *.i++ \ *.inl \ *.h \ *.hh \ *.hxx \ *.hpp \ *.h++ \ *.idl \ *.odl \ *.cs \ *.php \ *.php3 \ *.inc \ *.m \ *.mm \ *.dox \ *.py \ *.f90 \ *.f \ *.vhd \ *.vhdl \ *.C \ *.CC \ *.C++ \ *.II \ *.I++ \ *.H \ *.HH \ *.H++ \ *.CS \ *.PHP \ *.PHP3 \ *.M \ *.MM \ *.PY \ *.F90 \ *.F \ *.VHD \ *.VHDL RECURSIVE = NO EXCLUDE = EXCLUDE_SYMLINKS = NO EXCLUDE_PATTERNS = */ui_*.h \ */qrc_*.cpp \ */moc_*.cpp EXCLUDE_SYMBOLS = EXAMPLE_PATH = EXAMPLE_PATTERNS = * EXAMPLE_RECURSIVE = NO IMAGE_PATH = INPUT_FILTER = FILTER_PATTERNS = FILTER_SOURCE_FILES = NO #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- SOURCE_BROWSER = YES INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES REFERENCED_BY_RELATION = YES REFERENCES_RELATION = YES REFERENCES_LINK_SOURCE = YES USE_HTAGS = NO VERBATIM_HEADERS = YES #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- ALPHABETICAL_INDEX = YES COLS_IN_ALPHA_INDEX = 3 IGNORE_PREFIX = KLF #--------------------------------------------------------------------------- # configuration options related to the HTML output #--------------------------------------------------------------------------- GENERATE_HTML = YES HTML_OUTPUT = html HTML_FILE_EXTENSION = .html HTML_HEADER = @CMAKE_CURRENT_SOURCE_DIR@/apidoc/dox_header.html HTML_FOOTER = @CMAKE_CURRENT_SOURCE_DIR@/apidoc/dox_footer@KLF_DOXYGEN_SF@.html HTML_STYLESHEET = @CMAKE_CURRENT_SOURCE_DIR@/apidoc/dox_style.css HTML_ALIGN_MEMBERS = YES GENERATE_HTMLHELP = NO GENERATE_DOCSET = NO DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project HTML_DYNAMIC_SECTIONS = NO CHM_FILE = HHC_LOCATION = GENERATE_CHI = NO CHM_INDEX_ENCODING = BINARY_TOC = NO TOC_EXPAND = NO DISABLE_INDEX = NO ENUM_VALUES_PER_LINE = 4 GENERATE_TREEVIEW = NONE TREEVIEW_WIDTH = 250 FORMULA_FONTSIZE = 10 #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- GENERATE_LATEX = NO LATEX_OUTPUT = latex LATEX_CMD_NAME = latex MAKEINDEX_CMD_NAME = makeindex COMPACT_LATEX = NO PAPER_TYPE = a4wide EXTRA_PACKAGES = LATEX_HEADER = PDF_HYPERLINKS = YES USE_PDFLATEX = YES LATEX_BATCHMODE = NO LATEX_HIDE_INDICES = NO #--------------------------------------------------------------------------- # configuration options related to the RTF output #--------------------------------------------------------------------------- GENERATE_RTF = NO RTF_OUTPUT = rtf COMPACT_RTF = NO RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = RTF_EXTENSIONS_FILE = #--------------------------------------------------------------------------- # configuration options related to the man page output #--------------------------------------------------------------------------- GENERATE_MAN = NO MAN_OUTPUT = man MAN_EXTENSION = .3 MAN_LINKS = NO #--------------------------------------------------------------------------- # configuration options related to the XML output #--------------------------------------------------------------------------- GENERATE_XML = NO XML_OUTPUT = xml XML_SCHEMA = XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- GENERATE_AUTOGEN_DEF = NO #--------------------------------------------------------------------------- # configuration options related to the Perl module output #--------------------------------------------------------------------------- GENERATE_PERLMOD = NO PERLMOD_LATEX = NO PERLMOD_PRETTY = YES PERLMOD_MAKEVAR_PREFIX = #--------------------------------------------------------------------------- # Configuration options related to the preprocessor #--------------------------------------------------------------------------- ENABLE_PREPROCESSING = YES MACRO_EXPANSION = NO EXPAND_ONLY_PREDEF = NO SEARCH_INCLUDES = YES INCLUDE_PATH = INCLUDE_FILE_PATTERNS = PREDEFINED = KLFBACKEND_QT4 \ KLF_USE_DBUS EXPAND_AS_DEFINED = SKIP_FUNCTION_MACROS = YES #--------------------------------------------------------------------------- # Configuration::additions related to external references #--------------------------------------------------------------------------- TAGFILES = apidoc/qt4.tag=http://doc.trolltech.com/4.6 \ @KLF_APIDOC_DIR@/klfbackend.tag=../../klfbackend/html \ @KLF_APIDOC_DIR@/klftools.tag=../../klftools/html # We NEED to generate a tagfile, as it is the tagfile that is used as # output name in CMake's compilation command definitions GENERATE_TAGFILE = @KLF_APIDOC_DIR@/klfapp.tag ALLEXTERNALS = NO EXTERNAL_GROUPS = YES PERL_PATH = /usr/bin/perl #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- CLASS_DIAGRAMS = NO MSCGEN_PATH = HIDE_UNDOC_RELATIONS = YES HAVE_DOT = YES DOT_FONTNAME = FreeSans DOT_FONTPATH = CLASS_GRAPH = YES COLLABORATION_GRAPH = YES GROUP_GRAPHS = YES UML_LOOK = NO TEMPLATE_RELATIONS = NO INCLUDE_GRAPH = YES INCLUDED_BY_GRAPH = YES CALL_GRAPH = NO CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = YES DIRECTORY_GRAPH = YES DOT_IMAGE_FORMAT = png DOT_PATH = DOTFILE_DIRS = DOT_GRAPH_MAX_NODES = 50 MAX_DOT_GRAPH_DEPTH = 1000 DOT_TRANSPARENT = YES DOT_MULTI_TARGETS = NO GENERATE_LEGEND = YES DOT_CLEANUP = YES #--------------------------------------------------------------------------- # Configuration::additions related to the search engine #--------------------------------------------------------------------------- SEARCHENGINE = NO klatexformula-3.2.8/Doxyfile.klfbackend.in000644 002161 000024 00000026434 12244200462 021552 0ustar00philippestaff000000 000000 # Doxyfile 1.5.6 #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- DOXYFILE_ENCODING = UTF-8 PROJECT_NAME = "KLFBackend Library" PROJECT_NUMBER = @KLF_VERSION@ OUTPUT_DIRECTORY = @KLF_APIDOC_DIR@@KLF_DOXYGEN_SF@/klfbackend CREATE_SUBDIRS = NO OUTPUT_LANGUAGE = English BRIEF_MEMBER_DESC = YES REPEAT_BRIEF = YES ABBREVIATE_BRIEF = "The $name class" \ "The $name widget" \ "The $name file" \ is \ provides \ specifies \ contains \ represents \ a \ an \ the ALWAYS_DETAILED_SEC = NO INLINE_INHERITED_MEMB = NO FULL_PATH_NAMES = YES STRIP_FROM_PATH = STRIP_FROM_INC_PATH = SHORT_NAMES = NO JAVADOC_AUTOBRIEF = NO QT_AUTOBRIEF = NO MULTILINE_CPP_IS_BRIEF = NO INHERIT_DOCS = NO SEPARATE_MEMBER_PAGES = NO TAB_SIZE = 8 ALIASES = OPTIMIZE_OUTPUT_FOR_C = NO OPTIMIZE_OUTPUT_JAVA = NO OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO SUBGROUPING = YES TYPEDEF_HIDES_STRUCT = NO #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- EXTRACT_ALL = NO EXTRACT_PRIVATE = NO EXTRACT_STATIC = YES EXTRACT_LOCAL_CLASSES = YES EXTRACT_LOCAL_METHODS = NO EXTRACT_ANON_NSPACES = NO HIDE_UNDOC_MEMBERS = YES HIDE_UNDOC_CLASSES = YES HIDE_FRIEND_COMPOUNDS = YES HIDE_IN_BODY_DOCS = NO INTERNAL_DOCS = YES CASE_SENSE_NAMES = YES HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES INLINE_INFO = YES SORT_MEMBER_DOCS = YES SORT_BRIEF_DOCS = NO SORT_GROUP_NAMES = NO SORT_BY_SCOPE_NAME = NO GENERATE_TODOLIST = YES GENERATE_TESTLIST = YES GENERATE_BUGLIST = YES GENERATE_DEPRECATEDLIST= YES ENABLED_SECTIONS = MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES SHOW_DIRECTORIES = NO SHOW_FILES = YES SHOW_NAMESPACES = YES FILE_VERSION_FILTER = #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- QUIET = NO WARNINGS = YES WARN_IF_UNDOCUMENTED = YES WARN_IF_DOC_ERROR = YES WARN_NO_PARAMDOC = NO WARN_FORMAT = "$file:$line: $text" WARN_LOGFILE = #--------------------------------------------------------------------------- # configuration options related to the input files #--------------------------------------------------------------------------- INPUT = src/klfbackend INPUT_ENCODING = UTF-8 FILE_PATTERNS = *.c \ *.cc \ *.cxx \ *.cpp \ *.c++ \ *.d \ *.java \ *.ii \ *.ixx \ *.ipp \ *.i++ \ *.inl \ *.h \ *.hh \ *.hxx \ *.hpp \ *.h++ \ *.idl \ *.odl \ *.cs \ *.php \ *.php3 \ *.inc \ *.m \ *.mm \ *.dox \ *.py \ *.f90 \ *.f \ *.vhd \ *.vhdl \ *.C \ *.CC \ *.C++ \ *.II \ *.I++ \ *.H \ *.HH \ *.H++ \ *.CS \ *.PHP \ *.PHP3 \ *.M \ *.MM \ *.PY \ *.F90 \ *.F \ *.VHD \ *.VHDL RECURSIVE = NO EXCLUDE = EXCLUDE_SYMLINKS = NO EXCLUDE_PATTERNS = */ui_*.h \ */qrc_*.cpp \ */moc_*.cpp EXCLUDE_SYMBOLS = EXAMPLE_PATH = EXAMPLE_PATTERNS = * EXAMPLE_RECURSIVE = NO IMAGE_PATH = INPUT_FILTER = FILTER_PATTERNS = FILTER_SOURCE_FILES = NO #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- SOURCE_BROWSER = YES INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES REFERENCED_BY_RELATION = YES REFERENCES_RELATION = YES REFERENCES_LINK_SOURCE = YES USE_HTAGS = NO VERBATIM_HEADERS = YES #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- ALPHABETICAL_INDEX = YES COLS_IN_ALPHA_INDEX = 2 IGNORE_PREFIX = KLF klf #--------------------------------------------------------------------------- # configuration options related to the HTML output #--------------------------------------------------------------------------- GENERATE_HTML = YES HTML_OUTPUT = html HTML_FILE_EXTENSION = .html HTML_HEADER = @CMAKE_CURRENT_SOURCE_DIR@/apidoc/dox_header.html HTML_FOOTER = @CMAKE_CURRENT_SOURCE_DIR@/apidoc/dox_footer@KLF_DOXYGEN_SF@.html HTML_STYLESHEET = @CMAKE_CURRENT_SOURCE_DIR@/apidoc/dox_style.css HTML_ALIGN_MEMBERS = YES GENERATE_HTMLHELP = NO GENERATE_DOCSET = NO DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project HTML_DYNAMIC_SECTIONS = NO CHM_FILE = HHC_LOCATION = GENERATE_CHI = NO CHM_INDEX_ENCODING = BINARY_TOC = NO TOC_EXPAND = NO DISABLE_INDEX = NO ENUM_VALUES_PER_LINE = 4 GENERATE_TREEVIEW = NONE TREEVIEW_WIDTH = 250 FORMULA_FONTSIZE = 10 #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- GENERATE_LATEX = NO LATEX_OUTPUT = latex LATEX_CMD_NAME = latex MAKEINDEX_CMD_NAME = makeindex COMPACT_LATEX = NO PAPER_TYPE = a4wide EXTRA_PACKAGES = LATEX_HEADER = PDF_HYPERLINKS = YES USE_PDFLATEX = YES LATEX_BATCHMODE = NO LATEX_HIDE_INDICES = NO #--------------------------------------------------------------------------- # configuration options related to the RTF output #--------------------------------------------------------------------------- GENERATE_RTF = NO RTF_OUTPUT = rtf COMPACT_RTF = NO RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = RTF_EXTENSIONS_FILE = #--------------------------------------------------------------------------- # configuration options related to the man page output #--------------------------------------------------------------------------- GENERATE_MAN = NO MAN_OUTPUT = man MAN_EXTENSION = .3 MAN_LINKS = NO #--------------------------------------------------------------------------- # configuration options related to the XML output #--------------------------------------------------------------------------- GENERATE_XML = NO XML_OUTPUT = xml XML_SCHEMA = XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- GENERATE_AUTOGEN_DEF = NO #--------------------------------------------------------------------------- # configuration options related to the Perl module output #--------------------------------------------------------------------------- GENERATE_PERLMOD = NO PERLMOD_LATEX = NO PERLMOD_PRETTY = YES PERLMOD_MAKEVAR_PREFIX = #--------------------------------------------------------------------------- # Configuration options related to the preprocessor #--------------------------------------------------------------------------- ENABLE_PREPROCESSING = YES MACRO_EXPANSION = NO EXPAND_ONLY_PREDEF = NO SEARCH_INCLUDES = YES INCLUDE_PATH = INCLUDE_FILE_PATTERNS = PREDEFINED = KLFBACKEND_QT4 EXPAND_AS_DEFINED = SKIP_FUNCTION_MACROS = YES #--------------------------------------------------------------------------- # Configuration::additions related to external references #--------------------------------------------------------------------------- TAGFILES = apidoc/qt4.tag=http://doc.trolltech.com/4.6 # We NEED to generate a tagfile, as it is the tagfile that is used as # output name in CMake's compilation command definitions # Plus, klfapp and klftools link to this tagfile GENERATE_TAGFILE = @KLF_APIDOC_DIR@/klfbackend.tag ALLEXTERNALS = NO EXTERNAL_GROUPS = YES PERL_PATH = /usr/bin/perl #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- CLASS_DIAGRAMS = NO MSCGEN_PATH = HIDE_UNDOC_RELATIONS = YES HAVE_DOT = YES DOT_FONTNAME = FreeSans DOT_FONTPATH = CLASS_GRAPH = YES COLLABORATION_GRAPH = YES GROUP_GRAPHS = YES UML_LOOK = NO TEMPLATE_RELATIONS = NO INCLUDE_GRAPH = YES INCLUDED_BY_GRAPH = YES CALL_GRAPH = NO CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = YES DIRECTORY_GRAPH = YES DOT_IMAGE_FORMAT = png DOT_PATH = DOTFILE_DIRS = DOT_GRAPH_MAX_NODES = 50 MAX_DOT_GRAPH_DEPTH = 1000 DOT_TRANSPARENT = YES DOT_MULTI_TARGETS = NO GENERATE_LEGEND = YES DOT_CLEANUP = YES #--------------------------------------------------------------------------- # Configuration::additions related to the search engine #--------------------------------------------------------------------------- SEARCHENGINE = NO klatexformula-3.2.8/Doxyfile.klftools.in000644 002161 000024 00000026500 12244200462 021315 0ustar00philippestaff000000 000000 # Doxyfile 1.5.6 #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- DOXYFILE_ENCODING = UTF-8 PROJECT_NAME = "KLFTools Library" PROJECT_NUMBER = @KLF_VERSION@ OUTPUT_DIRECTORY = @KLF_APIDOC_DIR@@KLF_DOXYGEN_SF@/klftools CREATE_SUBDIRS = NO OUTPUT_LANGUAGE = English BRIEF_MEMBER_DESC = YES REPEAT_BRIEF = YES ABBREVIATE_BRIEF = "The $name class" \ "The $name widget" \ "The $name file" \ is \ provides \ specifies \ contains \ represents \ a \ an \ the ALWAYS_DETAILED_SEC = NO INLINE_INHERITED_MEMB = NO FULL_PATH_NAMES = YES STRIP_FROM_PATH = STRIP_FROM_INC_PATH = SHORT_NAMES = NO JAVADOC_AUTOBRIEF = NO QT_AUTOBRIEF = NO MULTILINE_CPP_IS_BRIEF = NO INHERIT_DOCS = NO SEPARATE_MEMBER_PAGES = NO TAB_SIZE = 8 ALIASES = OPTIMIZE_OUTPUT_FOR_C = NO OPTIMIZE_OUTPUT_JAVA = NO OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO SUBGROUPING = YES TYPEDEF_HIDES_STRUCT = NO #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- EXTRACT_ALL = YES EXTRACT_PRIVATE = NO EXTRACT_STATIC = YES EXTRACT_LOCAL_CLASSES = YES EXTRACT_LOCAL_METHODS = NO EXTRACT_ANON_NSPACES = NO HIDE_UNDOC_MEMBERS = NO HIDE_UNDOC_CLASSES = NO HIDE_FRIEND_COMPOUNDS = YES HIDE_IN_BODY_DOCS = NO INTERNAL_DOCS = YES CASE_SENSE_NAMES = YES HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES INLINE_INFO = YES SORT_MEMBER_DOCS = YES SORT_BRIEF_DOCS = NO SORT_GROUP_NAMES = NO SORT_BY_SCOPE_NAME = NO GENERATE_TODOLIST = YES GENERATE_TESTLIST = YES GENERATE_BUGLIST = YES GENERATE_DEPRECATEDLIST= YES ENABLED_SECTIONS = MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES SHOW_DIRECTORIES = NO SHOW_FILES = YES SHOW_NAMESPACES = YES FILE_VERSION_FILTER = #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- QUIET = NO WARNINGS = YES WARN_IF_UNDOCUMENTED = YES WARN_IF_DOC_ERROR = YES WARN_NO_PARAMDOC = NO WARN_FORMAT = "$file:$line: $text" WARN_LOGFILE = #--------------------------------------------------------------------------- # configuration options related to the input files #--------------------------------------------------------------------------- INPUT = src/klftools/ INPUT_ENCODING = UTF-8 FILE_PATTERNS = *.c \ *.cc \ *.cxx \ *.cpp \ *.c++ \ *.d \ *.java \ *.ii \ *.ixx \ *.ipp \ *.i++ \ *.inl \ *.h \ *.hh \ *.hxx \ *.hpp \ *.h++ \ *.idl \ *.odl \ *.cs \ *.php \ *.php3 \ *.inc \ *.m \ *.mm \ *.dox \ *.py \ *.f90 \ *.f \ *.vhd \ *.vhdl \ *.C \ *.CC \ *.C++ \ *.II \ *.I++ \ *.H \ *.HH \ *.H++ \ *.CS \ *.PHP \ *.PHP3 \ *.M \ *.MM \ *.PY \ *.F90 \ *.F \ *.VHD \ *.VHDL RECURSIVE = NO EXCLUDE = EXCLUDE_SYMLINKS = NO EXCLUDE_PATTERNS = */ui_*.h \ */qrc_*.cpp \ */moc_*.cpp EXCLUDE_SYMBOLS = EXAMPLE_PATH = EXAMPLE_PATTERNS = * EXAMPLE_RECURSIVE = NO IMAGE_PATH = INPUT_FILTER = FILTER_PATTERNS = FILTER_SOURCE_FILES = NO #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- SOURCE_BROWSER = YES INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES REFERENCED_BY_RELATION = YES REFERENCES_RELATION = YES REFERENCES_LINK_SOURCE = YES USE_HTAGS = NO VERBATIM_HEADERS = YES #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- ALPHABETICAL_INDEX = YES COLS_IN_ALPHA_INDEX = 3 IGNORE_PREFIX = KLF #--------------------------------------------------------------------------- # configuration options related to the HTML output #--------------------------------------------------------------------------- GENERATE_HTML = YES HTML_OUTPUT = html HTML_FILE_EXTENSION = .html HTML_HEADER = @CMAKE_CURRENT_SOURCE_DIR@/apidoc/dox_header.html HTML_FOOTER = @CMAKE_CURRENT_SOURCE_DIR@/apidoc/dox_footer@KLF_DOXYGEN_SF@.html HTML_STYLESHEET = @CMAKE_CURRENT_SOURCE_DIR@/apidoc/dox_style.css HTML_ALIGN_MEMBERS = YES GENERATE_HTMLHELP = NO GENERATE_DOCSET = NO DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project HTML_DYNAMIC_SECTIONS = NO CHM_FILE = HHC_LOCATION = GENERATE_CHI = NO CHM_INDEX_ENCODING = BINARY_TOC = NO TOC_EXPAND = NO DISABLE_INDEX = NO ENUM_VALUES_PER_LINE = 4 GENERATE_TREEVIEW = NONE TREEVIEW_WIDTH = 250 FORMULA_FONTSIZE = 10 #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- GENERATE_LATEX = NO LATEX_OUTPUT = latex LATEX_CMD_NAME = latex MAKEINDEX_CMD_NAME = makeindex COMPACT_LATEX = NO PAPER_TYPE = a4wide EXTRA_PACKAGES = LATEX_HEADER = PDF_HYPERLINKS = YES USE_PDFLATEX = YES LATEX_BATCHMODE = NO LATEX_HIDE_INDICES = NO #--------------------------------------------------------------------------- # configuration options related to the RTF output #--------------------------------------------------------------------------- GENERATE_RTF = NO RTF_OUTPUT = rtf COMPACT_RTF = NO RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = RTF_EXTENSIONS_FILE = #--------------------------------------------------------------------------- # configuration options related to the man page output #--------------------------------------------------------------------------- GENERATE_MAN = NO MAN_OUTPUT = man MAN_EXTENSION = .3 MAN_LINKS = NO #--------------------------------------------------------------------------- # configuration options related to the XML output #--------------------------------------------------------------------------- GENERATE_XML = NO XML_OUTPUT = xml XML_SCHEMA = XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- GENERATE_AUTOGEN_DEF = NO #--------------------------------------------------------------------------- # configuration options related to the Perl module output #--------------------------------------------------------------------------- GENERATE_PERLMOD = NO PERLMOD_LATEX = NO PERLMOD_PRETTY = YES PERLMOD_MAKEVAR_PREFIX = #--------------------------------------------------------------------------- # Configuration options related to the preprocessor #--------------------------------------------------------------------------- ENABLE_PREPROCESSING = YES MACRO_EXPANSION = NO EXPAND_ONLY_PREDEF = NO SEARCH_INCLUDES = YES INCLUDE_PATH = INCLUDE_FILE_PATTERNS = PREDEFINED = KLFBACKEND_QT4 EXPAND_AS_DEFINED = SKIP_FUNCTION_MACROS = YES #--------------------------------------------------------------------------- # Configuration::additions related to external references #--------------------------------------------------------------------------- TAGFILES = apidoc/qt4.tag=http://doc.trolltech.com/4.6 \ @KLF_APIDOC_DIR@/klfbackend.tag=../../klfbackend/html # We NEED to generate a tagfile, as it is the tagfile that is used as # output name in CMake's compilation command definitions # Plus, klfapp links to this tagfile GENERATE_TAGFILE = @KLF_APIDOC_DIR@/klftools.tag ALLEXTERNALS = NO EXTERNAL_GROUPS = YES PERL_PATH = /usr/bin/perl #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- CLASS_DIAGRAMS = NO MSCGEN_PATH = HIDE_UNDOC_RELATIONS = YES HAVE_DOT = YES DOT_FONTNAME = FreeSans DOT_FONTPATH = CLASS_GRAPH = YES COLLABORATION_GRAPH = YES GROUP_GRAPHS = YES UML_LOOK = NO TEMPLATE_RELATIONS = NO INCLUDE_GRAPH = YES INCLUDED_BY_GRAPH = YES CALL_GRAPH = NO CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = YES DIRECTORY_GRAPH = YES DOT_IMAGE_FORMAT = png DOT_PATH = DOTFILE_DIRS = DOT_GRAPH_MAX_NODES = 50 MAX_DOT_GRAPH_DEPTH = 1000 DOT_TRANSPARENT = YES DOT_MULTI_TARGETS = NO GENERATE_LEGEND = YES DOT_CLEANUP = YES #--------------------------------------------------------------------------- # Configuration::additions related to the search engine #--------------------------------------------------------------------------- SEARCHENGINE = NO klatexformula-3.2.8/extras/000755 002161 000024 00000000000 12244200462 016651 5ustar00philippestaff000000 000000 klatexformula-3.2.8/INSTALL000644 002161 000024 00000000713 12244200462 016375 0ustar00philippestaff000000 000000 The very quick install guide ---------------------------- > mkdir build && cd build build> cmake .. <--- cmake step build> make build> sudo make install Password: The cmake step can be repeated with options to set cache variables, like build> cmake .. -DCMAKE_INSTALL_PREFIX=/usr For detailed up-to-date installation instructions, please see http://klatexformula.sourceforge.net/klfwiki/index.php/User_Manual:Downloading_%26_Installing klatexformula-3.2.8/README000644 002161 000024 00000004401 12244200462 016222 0ustar00philippestaff000000 000000 --------------------------- KLatexFormula - README file --------------------------- KLatexFormula is an easy-to-use graphical application for generating images (that you can drag and drop, copy and paste or save to disk) from LaTeX equations. DESCRIPTION ----------- This application provides an easy-to-use graphical user interface for generating images from LaTeX equations. These images can be dragged and dropped or copied and pasted into external applications (presentations, text documents, graphics...), or can be saved to disk in a variety of formats (PNG, JPG, BMP, EPS, PDF, etc.). In addition to the graphical user interface, a command-line interface and a C++ library is provided to perform the same job. INSTALLATION ------------ Installation instructions can be found at http://klatexformula.sourceforge.net/klfwiki/index.php/User_Manual:Downloading_%26_Installing HELP & DOCUMENTATION -------------------- Documentation can be found on the KLatexFormula Wiki at http://klatexformula.sourceforge.net/klfwiki/ REPORTING BUGS AND PROVIDING FEEDBACK ------------------------------------- Please report bugs and suggest features and improvements using the Bug Tracker System hosted on Sourceforge.net. https://sourceforge.net/tracker/?func=browse&group_id=174270&atid=868582 LEGAL INFORMATION ----------------- KLatexFormula is licensed under the GPL license, a copy of which is provided in the COPYING file. * This source tarball contains fonts (Computer Modern Unicode Fonts in otf format) provided by Andrey V. Panov. The original copyright notice is provided in the file CMUFONTS_COPYRIGHT. * This source tarball contains code from Qt/Trolltech: * src/modeltest.h * src/modeltest.cpp The original copyright notice is included in the first lines of those files. * This source tarball contains code from Qt/Nokia slightly modified by myself: * src/klftools/qtcolortriangle.h * src/klftools/qtcolortriangle.cpp The original copyright notice is included in the first lines of those files. * The background picture used in the `Galaxy' skin comes from NASA's "image of the day" at http://www.nasa.gov/images/content/190590main_GPN-2000-000895.jpg Image usage guidelines: http://www.nasa.gov/audience/formedia/features/MP_Photo_Guidelines.html klatexformula-3.2.8/src/000755 002161 000024 00000000000 12244200461 016131 5ustar00philippestaff000000 000000 klatexformula-3.2.8/templates/000755 002161 000024 00000000000 12244200461 017340 5ustar00philippestaff000000 000000 klatexformula-3.2.8/VERSION000644 002161 000024 00000000006 12244200462 016407 0ustar00philippestaff000000 000000 3.2.8 klatexformula-3.2.8/templates/cpp000644 002161 000024 00000002700 12244200461 020044 0ustar00philippestaff000000 000000 /*************************************************************************** * file $FILENAME$ * This file is part of the KLatexFormula Project. * Copyright (C) 2011 by Philippe Faist * philippe.faist at bluewin.ch * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ /* $Id$ */ klatexformula-3.2.8/templates/h000644 002161 000024 00000002677 12244200461 017526 0ustar00philippestaff000000 000000 /*************************************************************************** * file $FILENAME$ * This file is part of the KLatexFormula Project. * Copyright (C) 2011 by Philippe Faist * philippe.faist at bluewin.ch * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ /* $Id$ */ klatexformula-3.2.8/src/CMakeLists.txt000644 002161 000024 00000056456 12244200461 020711 0ustar00philippestaff000000 000000 # ######################################## # # CMake project file for klatexformula/src # # ######################################## # # $Id: CMakeLists.txt 864 2013-11-23 13:52:28Z phfaist $ # ######################################## # if(KLF_MACOSX_BUNDLES) set(KLF_MACOSXDIR "${CMAKE_CURRENT_SOURCE_DIR}/macosx") set(KLF_MACOSX_BUNDLE_PATH "${CMAKE_CURRENT_BINARY_DIR}/klatexformula-${KLF_VERSION}.app") include(KLFMacBundle) endif(KLF_MACOSX_BUNDLES) if(WIN32) # Extra linker flags for win32 compilation set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -Wl,--enable-auto-import") set(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -Wl,--enable-auto-import") endif(WIN32) # include SUBDIR: our klfbackend add_subdirectory(klfbackend) if(NOT KLF_BUILD_TOOLS) return() endif(NOT KLF_BUILD_TOOLS) # Re-Include what we need from Qt for GUI KLF core+gui+xml+sql(+dbus) set(QT_USE_QTXML TRUE) set(QT_USE_QTSQL TRUE) if(KLF_USE_DBUS) set(QT_USE_QTDBUS TRUE) endif(KLF_USE_DBUS) # include our Qt4 stuff; Qt3 needs nothing. if(KLF_USE_QT4) include(${QT_USE_FILE}) endif(KLF_USE_QT4) # include SUBDIR: our klftools add_subdirectory(klftools) if(NOT KLF_BUILD_GUI) return() endif(NOT KLF_BUILD_GUI) # Sources set(klfapp_SRCS klfconfig.cpp klflatexedit.cpp klflatexsymbols.cpp klflibentryeditor.cpp klflibbrowser.cpp klflib.cpp klflibview.cpp klflibdbengine.cpp klfliblegacyengine.cpp klfmime.cpp klfmainwin.cpp klfsettings.cpp klfstylemanager.cpp klfmain.cpp ) # Headers # * with QObject classes (needs moc) set(klfapp_MOCHEADERS klflatexedit.h klflatexsymbols.h klflibentryeditor.h klflibbrowser.h klflibbrowser_p.h klflib.h klflibview.h klflibview_p.h klflibdbengine.h klflibdbengine_p.h klfliblegacyengine.h klfliblegacyengine_p.h klfmime.h klfmime_p.h klfmainwin.h klfmainwin_p.h klfsettings.h klfstylemanager.h ) # * all headers set(klfapp_HEADERS klfmain.h klfconfig.h klfpluginiface.h klflib_p.h ${klfapp_MOCHEADERS} ) # UI Forms set(klfapp_UIS klflatexsymbols.ui klflibbrowser.ui klflibentryeditor.ui klflibopenresourcedlg.ui klflibrespropeditor.ui klfliblocalfilewidget.ui klflibnewsubresdlg.ui klfmainwin.ui klfprogerr.ui klfsettings.ui klfstylemanager.ui klfaboutdialog.ui klfwhatsnewdialog.ui klflibexportdialog.ui ) # Special adjustments for certain platforms and options # * Windows if(WIN32) list(APPEND klfapp_SRCS mswin/klfwinclipboard.cpp ) endif(WIN32) if(APPLE) set(klfapp_HEADERS ${klfapp_HEADERS} macosx/klfmacclipboard.h ) set(klfapp_SRCS ${klfapp_SRCS} macosx/klfmacclipboard.cpp ) endif(APPLE) # * X11 if(Q_WS_X11) set(klfapp_SRCS ${klfapp_SRCS} x11/klfx11.cpp ) endif(Q_WS_X11) # * DBus if(KLF_USE_DBUS) add_definitions(-DKLF_USE_DBUS) list(APPEND klfapp_SRCS klfdbus.cpp ) list(APPEND klfapp_MOCHEADERS klfdbus.h ) list(APPEND klfapp_HEADERS klfdbus.h ) endif(KLF_USE_DBUS) if(KLF_DEBUG_USE_MODELTEST) add_definitions(-DKLF_DEBUG_USE_MODELTEST) set(klfapp_SRCS ${klfapp_SRCS} modeltest.cpp ) set(klfapp_MOCHEADERS ${klfapp_MOCHEADERS} modeltest.h ) endif(KLF_DEBUG_USE_MODELTEST) KLFInstHeaders(klfapp_INSTHEADERS "${klfapp_HEADERS}") list(REMOVE_ITEM klfapp_INSTHEADERS # list more private headers here qtcolortriangle.h macosx/klfmacclipboard.h ) # klfapp Library # -------------- if(KLF_LIBKLFTOOLS_STATIC) # let main() know it has to initialize klftools' resource with Q_INIT_RESOURCE(klftoolsres) add_definitions(-DKLF_LIBKLFTOOLS_STATIC) endif(KLF_LIBKLFTOOLS_STATIC) if(KLF_NO_CMU_FONT) add_definitions(-DKLF_NO_CMU_FONT) endif(KLF_NO_CMU_FONT) # Don't use CMAKE_INSTALL_PREFIX itself, as it is irrelevant for windows installers # we need relative path set(klf_share_dir_abs "${CMAKE_INSTALL_PREFIX}") if(UNIX AND NOT KLF_MACOSX_BUNDLES) set(klf_share_dir_abs "${klf_share_dir_abs}/share/klatexformula") endif(UNIX AND NOT KLF_MACOSX_BUNDLES) KLFRelativePath(klf_share_dir "${KLF_ABS_INSTALL_BIN_DIR}" "${klf_share_dir_abs}") KLFRelativePath(klf_share_rccresources_dir "${KLF_ABS_INSTALL_BIN_DIR}" "${KLF_ABS_INSTALL_RCCRESOURCES_DIR}") if(KLF_MACOSX_BUNDLES OR IS_ABSOLUTE "${klf_share_dir}") set(klf_share_dir "") # let the program find out endif(KLF_MACOSX_BUNDLES OR IS_ABSOLUTE "${klf_share_dir}") if(KLF_MACOSX_BUNDLES OR IS_ABSOLUTE "${klf_share_rccresources_dir}") set(klf_share_rccresources_dir "") # let the program find out endif(KLF_MACOSX_BUNDLES OR IS_ABSOLUTE "${klf_share_rccresources_dir}") if(klf_share_dir) add_definitions(-DKLF_SHARE_DIR="${klf_share_dir}") endif(klf_share_dir) if(klf_share_rccresources_dir) add_definitions(-DKLF_SHARE_RCCRESOURCES_DIR="${klf_share_rccresources_dir}") endif(klf_share_rccresources_dir) # Uis, Mocs qt4_wrap_ui(klfapp_UIS_H ${klfapp_UIS}) qt4_wrap_cpp(klfapp_MOC_CPPS ${klfapp_MOCHEADERS}) include_directories("${CMAKE_CURRENT_BINARY_DIR}" "${CMAKE_CURRENT_SOURCE_DIR}" "${CMAKE_CURRENT_SOURCE_DIR}/klftools" "${CMAKE_CURRENT_SOURCE_DIR}/klfbackend") set(klfapp_ALLSRC ${klfapp_SRCS} ${klfapp_UIS_H} ${klfapp_MOC_CPPS}) if(KLF_LIBKLFAPP_STATIC) add_library(klfapp STATIC ${klfapp_ALLSRC}) else(KLF_LIBKLFAPP_STATIC) add_library(klfapp SHARED ${klfapp_ALLSRC}) if(KLF_MACOSX_BUNDLES) KLFMakeFramework(klfapp ${klfapp_INSTHEADERS}) set_target_properties(klfapp PROPERTIES MACOSX_FRAMEWORK_IDENTIFIER "org.klatexformula.klfapp" MACOSX_FRAMEWORK_SHORT_VERSION_STRING "${KLF_VERSION}" MACOSX_FRAMEWORK_BUNDLE_VERSION "${KLF_VERSION}" ) endif(KLF_MACOSX_BUNDLES) set_target_properties(klfapp PROPERTIES VERSION "${KLF_LIB_VERSION}" SOVERSION "${KLF_LIB_VERSION}" ) endif(KLF_LIBKLFAPP_STATIC) add_dependencies(klfapp klftools klfbackend) target_link_libraries(klfapp ${QT_LIBRARIES} klfbackend klftools) set_target_properties(klfapp PROPERTIES # DEBUG_POSTFIX "${KLF_DEBUG_POSTFIX}" PUBLIC_HEADER "${klfapp_INSTHEADERS}" ) # klatexformula Executable # ------------------------ # Sources set(klatexformula_SRCS main.cpp ) # Translations set(klatexformula_TSS i18n/klf_fr.ts i18n/klf_cs.ts ) # Resources set(klatexformula_QRCS klfres.qrc ) # Translations qt4_add_translation(klatexformula_QMS ${klatexformula_TSS}) # build the klf_xtradata.qrc file set(klf_xtradata_res "${CMAKE_CURRENT_BINARY_DIR}/klf_xtradata.qrc") file(WRITE "${klf_xtradata_res}" "\n ") # - add translations foreach(qm ${klatexformula_QMS}) get_filename_component(baseqmname "${qm}" NAME) file(APPEND "${klf_xtradata_res}" " ${qm}\n") endforeach(qm) file(APPEND "${klf_xtradata_res}" " \n") # - add fonts file(APPEND "${klf_xtradata_res}" " \n") foreach(fnt ${KLF_INCLUDE_FONTS}) get_filename_component(basefntname "${fnt}" NAME) if(NOT IS_ABSOLUTE "${fnt}") set(fnt "${CMAKE_CURRENT_SOURCE_DIR}/${fnt}") endif(NOT IS_ABSOLUTE "${fnt}") file(APPEND "${klf_xtradata_res}" " ${fnt}\n") endforeach(fnt) file(APPEND "${klf_xtradata_res}" " \n") file(APPEND "${klf_xtradata_res}" "\n") list(APPEND klatexformula_QRCS "${klf_xtradata_res}") qt4_add_resources(klatexformula_QRC_CPPS ${klatexformula_QRCS}) set(klatexformula_ALLSRC ${klatexformula_SRCS} ${klatexformula_QRC_CPPS}) set(klatexformula_winrc) if(MINGW) set(KLF_WIN_ICON "mswin\\\\klficon64.ico" CACHE STRING "Icon for klatexformula.exe program, relative to src/, with (escaped double-backslashes!)") file(WRITE "${CMAKE_CURRENT_BINARY_DIR}/klatexformula.rc" "IDI_ICON1 ICON DISCARDABLE \"${KLF_WIN_ICON}\"\n") include_directories("${CMAKE_CURRENT_SOURCE_DIR}") # windows .rc resource compilation for mingw ADD_CUSTOM_COMMAND(OUTPUT "${CMAKE_CURRENT_BINARY_DIR}/klatexformula.rc.o" COMMAND windres.exe -I"${CMAKE_CURRENT_SOURCE_DIR}" -i"${CMAKE_CURRENT_BINARY_DIR}/klatexformula.rc" -o "${CMAKE_CURRENT_BINARY_DIR}/klatexformula.rc.o" ) set(klatexformula_ALLSRC ${klatexformula_ALLSRC} "${CMAKE_CURRENT_BINARY_DIR}/klatexformula.rc.o") endif(MINGW) add_executable(klatexformula ${klatexformula_ALLSRC}) target_link_libraries(klatexformula ${QT_LIBRARIES} klfbackend klftools klfapp) if(WIN32) # On debug versions, the application will open a console in which the debug output is shown. # Add the -mwindows only if we are not compiling in debug mode. # Add also a separate target klatexformula_cmdl to build the cmdl version, keeping the shell # window open. add_executable(klatexformula_cmdl ${klatexformula_ALLSRC}) target_link_libraries(klatexformula_cmdl ${QT_LIBRARIES} klfbackend klftools klfapp) if(NOT KLF_DEBUG) set_target_properties(klatexformula PROPERTIES LINK_FLAGS_RELEASE "-Wl,-subsystem,windows") set_target_properties(klatexformula_cmdl PROPERTIES LINK_FLAGS_RELEASE "-Wl,-subsystem,console") endif(NOT KLF_DEBUG) endif(WIN32) if(KLF_MACOSX_BUNDLES) # Set up the application bundle under Mac OS X set(KLF_BUNDLE_ICON_FILE "klficon.icns") configure_file( "${CMAKE_SOURCE_DIR}/src/macosx/Info.plist.in" "${CMAKE_CURRENT_BINARY_DIR}/Info.plist" @ONLY) set_target_properties(klatexformula PROPERTIES OUTPUT_NAME klatexformula-${KLF_VERSION} MACOSX_BUNDLE_ICON_FILE klficon.icns MACOSX_BUNDLE_INFO_PLIST "${CMAKE_CURRENT_BINARY_DIR}/Info.plist" MACOSX_BUNDLE_INFO_STRING "KLatexFormula version ${KLF_VERSION}" MACOSX_BUNDLE_GUI_IDENTIFIER "org.klatexformula.klatexformula" MACOSX_BUNDLE_LONG_VERSION_STRING "${KLF_VERSION}" MACOSX_BUNDLE_SHORT_VERSION_STRING "${KLF_VERSION}" MACOSX_BUNDLE_BUNDLE_VERSION "${KLF_VERSION}" MACOSX_BUNDLE_BUNDLE_COPYRIGHT "Copyright (C) 2011 Philippe Faist" ) KLFMakeBundle(klatexformula klatexformula-${KLF_VERSION}.app) # Add the frameworks to be included as private frameworks. KLFBundlePrivateImportQtLib(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" klatexformula_BUNDLEXTRA Core "") KLFBundlePrivateImportQtLib(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" klatexformula_BUNDLEXTRA Gui Core) KLFBundlePrivateImportQtLib(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" klatexformula_BUNDLEXTRA Xml Core) KLFBundlePrivateImportQtLib(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" klatexformula_BUNDLEXTRA Sql Core) KLFBundlePrivateImportQtLib(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" klatexformula_BUNDLEXTRA DBus "Core;Xml") foreach(plugin ${KLF_BUNDLE_QT_PLUGINS}) KLFBundlePrivateImport(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" klatexformula_BUNDLEXTRA "${plugin}" "${QT_PLUGINS_DIR}/${plugin}" plugins) KLFInstallNameToolID(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" "plugins/${plugin}") KLFBundlePrivateLibUpdateQtDep(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" "plugins/${plugin}" "Core;Gui;Xml;Sql") endforeach() # Import&Setup klfbackend framework KLFBundlePrivateImport(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" klatexformula_BUNDLEXTRA "klfbackend.framework" "${CMAKE_CURRENT_BINARY_DIR}/klfbackend/klfbackend.framework" Frameworks) KLFInstallNameToolID(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" "Frameworks/klfbackend.framework/Versions/${KLF_LIB_VERSION}/klfbackend") KLFBundlePrivateLibUpdateQtDep(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" "Frameworks/klfbackend.framework/Versions/${KLF_LIB_VERSION}/klfbackend" "Core;Gui;Xml;Sql;DBus") # Import&Setup klftools framework KLFBundlePrivateImport(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" klatexformula_BUNDLEXTRA "klftools.framework" "${CMAKE_CURRENT_BINARY_DIR}/klftools/klftools.framework" Frameworks) KLFInstallNameToolID(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" "Frameworks/klftools.framework/Versions/${KLF_LIB_VERSION}/klftools") KLFBundlePrivateLibUpdateQtDep(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" "Frameworks/klftools.framework/Versions/${KLF_LIB_VERSION}/klftools" "Core;Gui;Xml;Sql;DBus") KLFInstallNameToolChange(klatexformula "Frameworks/klftools.framework/Versions/${KLF_LIB_VERSION}/klftools" "${KLF_MACOSX_BUNDLE_PATH}" "Frameworks/klfbackend.framework/Versions/${KLF_LIB_VERSION}/klfbackend" "${CMAKE_CURRENT_BINARY_DIR}/klfbackend/klfbackend.framework/Versions/${KLF_LIB_VERSION}/klfbackend") # Import&Setup klfapp framework KLFBundlePrivateImport(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" klatexformula_BUNDLEXTRA "klfapp.framework" "${CMAKE_CURRENT_BINARY_DIR}/klfapp.framework" Frameworks) KLFInstallNameToolID(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" "Frameworks/klfapp.framework/Versions/${KLF_LIB_VERSION}/klfapp") KLFBundlePrivateLibUpdateQtDep(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" "Frameworks/klfapp.framework/Versions/${KLF_LIB_VERSION}/klfapp" "Core;Gui;Xml;Sql;DBus") KLFInstallNameToolChange(klatexformula "Frameworks/klfapp.framework/Versions/${KLF_LIB_VERSION}/klfapp" "${KLF_MACOSX_BUNDLE_PATH}" "Frameworks/klfbackend.framework/Versions/${KLF_LIB_VERSION}/klfbackend" "${CMAKE_CURRENT_BINARY_DIR}/klfbackend/klfbackend.framework/Versions/${KLF_LIB_VERSION}/klfbackend") KLFInstallNameToolChange(klatexformula "Frameworks/klfapp.framework/Versions/${KLF_LIB_VERSION}/klfapp" "${KLF_MACOSX_BUNDLE_PATH}" "Frameworks/klftools.framework/Versions/${KLF_LIB_VERSION}/klftools" "${CMAKE_CURRENT_BINARY_DIR}/klftools/klftools.framework/Versions/${KLF_LIB_VERSION}/klftools") # Setup klatexformula executable's lib dependencies KLFBundlePrivateLibUpdateQtDep(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" "MacOS/klatexformula-${KLF_VERSION}" "Core;Gui;Xml;Sql;DBus") KLFInstallNameToolChange(klatexformula "MacOS/klatexformula-${KLF_VERSION}" "${KLF_MACOSX_BUNDLE_PATH}" "Frameworks/klfbackend.framework/Versions/${KLF_LIB_VERSION}/klfbackend" "${CMAKE_CURRENT_BINARY_DIR}/klfbackend/klfbackend.framework/Versions/${KLF_LIB_VERSION}/klfbackend") KLFInstallNameToolChange(klatexformula "MacOS/klatexformula-${KLF_VERSION}" "${KLF_MACOSX_BUNDLE_PATH}" "Frameworks/klftools.framework/Versions/${KLF_LIB_VERSION}/klftools" "${CMAKE_CURRENT_BINARY_DIR}/klftools/klftools.framework/Versions/${KLF_LIB_VERSION}/klftools") KLFInstallNameToolChange(klatexformula "MacOS/klatexformula-${KLF_VERSION}" "${KLF_MACOSX_BUNDLE_PATH}" "Frameworks/klfapp.framework/Versions/${KLF_LIB_VERSION}/klfapp" "${CMAKE_CURRENT_BINARY_DIR}/klfapp.framework/Versions/${KLF_LIB_VERSION}/klfapp") # Default Qt config stuff KLFBundlePrivateImport(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" klatexformula_BUNDLEXTRA qt.conf "${CMAKE_CURRENT_SOURCE_DIR}/macosx/qt.conf" Resources) # Add a few icons for our app KLFBundlePrivateImport(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" klatexformula_BUNDLEXTRA klficon.icns "${CMAKE_CURRENT_SOURCE_DIR}/macosx/klficon.icns" Resources) KLFBundlePrivateImport(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" klatexformula_BUNDLEXTRA klatexformula-128.png "${CMAKE_CURRENT_SOURCE_DIR}/klatexformula-128.png" Resources) KLFBundlePrivateImport(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" klatexformula_BUNDLEXTRA klatexformula-64.png "${CMAKE_CURRENT_SOURCE_DIR}/klatexformula-64.png" Resources) KLFBundlePrivateImport(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" klatexformula_BUNDLEXTRA klatexformula-32.png "${CMAKE_CURRENT_SOURCE_DIR}/klatexformula-32.png" Resources) KLFBundlePrivateImport(klatexformula "${KLF_MACOSX_BUNDLE_PATH}" klatexformula_BUNDLEXTRA klatexformula-16.png "${CMAKE_CURRENT_SOURCE_DIR}/klatexformula-16.png" Resources) KLFCMakeDebug("Extras to be bundled are ${klatexformula_BUNDLEXTRA}") KLFBundlePackage(klatexformula "${klatexformula_BUNDLEXTRA}") endif(KLF_MACOSX_BUNDLES) if(KLF_BUILD_PLUGINS) # Build Plugins add_subdirectory(plugins) endif(KLF_BUILD_PLUGINS) # Make man page if(HELP2MAN) KLFGetTargetLocation(klatexformula_binary klatexformula) # generate the man page set(LDPATHDEFS "export LD_LIBRARY_PATH='${CMAKE_CURRENT_BINARY_DIR}:${CMAKE_CURRENT_BINARY_DIR}/klfbackend:${CMAKE_CURRENT_BINARY_DIR}/klftools':\"$LD_LIBRARY_PATH\" ") add_custom_command(OUTPUT "klatexformula.1" COMMAND "sh" "-c" "${LDPATHDEFS}; ${HELP2MAN} -h --help='\"&1\"' -v --version='\"&1:klatexformula %k\"' --no-info ${klatexformula_binary} -o '${CMAKE_CURRENT_BINARY_DIR}/klatexformula.1'" COMMENT "Generating man page for klatexformula" DEPENDS "${klatexformula_binary}" VERBATIM ) if(GZIP) add_custom_command(OUTPUT "klatexformula.1.gz" COMMAND "${CMAKE_COMMAND}" -E copy "klatexformula.1" "klatexformula.1.bkp" COMMAND "${GZIP}" -f "klatexformula.1.bkp" COMMAND "${CMAKE_COMMAND}" -E copy "klatexformula.1.bkp.gz" "klatexformula.1.gz" WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}" COMMENT "Compressing (gzip) manpage" DEPENDS "klatexformula.1" VERBATIM ) set(klatexformula_manpage_file "klatexformula.1.gz") set(klatexformula_cmdl_manpage_file "klatexformula_cmdl.1.gz") else(GZIP) set(klatexformula_manpage_file "klatexformula.1") set(klatexformula_cmdl_manpage_file "klatexformula_cmdl.1") endif(GZIP) add_custom_command(OUTPUT "${klatexformula_cmdl_manpage_file}" COMMAND "${CMAKE_COMMAND}" -E copy "${klatexformula_manpage_file}" "${klatexformula_cmdl_manpage_file}" WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}" COMMENT "Copying ${klatexformula_manpage_file} to ${klatexformula_cmdl_manpage_file}" DEPENDS "${klatexformula_manpage_file}" VERBATIM ) add_custom_target(klatexformula_manpage ALL DEPENDS "${klatexformula_manpage_file}" "${klatexformula_cmdl_manpage_file}") if(KLF_INSTALL_DESKTOP AND KLF_INSTALL_SHARE_MAN1_DIR) install(FILES "${CMAKE_CURRENT_BINARY_DIR}/${klatexformula_manpage_file}" "${CMAKE_CURRENT_BINARY_DIR}/${klatexformula_cmdl_manpage_file}" DESTINATION "${KLF_INSTALL_SHARE_MAN1_DIR}") endif(KLF_INSTALL_DESKTOP AND KLF_INSTALL_SHARE_MAN1_DIR) endif(HELP2MAN) # Install Targets # --------------- # klfapp KLFInstallLibrary(klfapp KLF_INSTALL_KLFAPP_ "${KLF_INSTALL_LIB_DIR}" "include/klfapp") if(KLF_MACOSX_BUNDLES AND KLF_INSTALL_KLFAPP_FRAMEWORK) # Installed library's ID KLFInstFrameworkUpdateId("${KLF_INSTALL_LIB_DIR}/klfapp.framework/Versions/${KLF_LIB_VERSION}/klfapp") # Installed library's dependency on klfbackend should be updated KLFInstFrameworkUpdateLibChange( "${KLF_INSTALL_LIB_DIR}/klfapp.framework/Versions/${KLF_LIB_VERSION}/klfapp" "${CMAKE_CURRENT_BINARY_DIR}/klfbackend/klfbackend.framework/Versions/${KLF_LIB_VERSION}/klfbackend" "${KLF_INSTALL_LIB_DIR}/klfbackend.framework/Versions/${KLF_LIB_VERSION}/klfbackend" ) # Installed library's dependency on klftools should be updated KLFInstFrameworkUpdateLibChange( "${KLF_INSTALL_LIB_DIR}/klfapp.framework/Versions/${KLF_LIB_VERSION}/klfapp" "${CMAKE_CURRENT_BINARY_DIR}/klftools/klftools.framework/Versions/${KLF_LIB_VERSION}/klftools" "${KLF_INSTALL_LIB_DIR}/klftools.framework/Versions/${KLF_LIB_VERSION}/klftools" ) endif(KLF_MACOSX_BUNDLES AND KLF_INSTALL_KLFAPP_FRAMEWORK) if(WIN32 AND KLF_INSTALL_QTLIBS) # Install Qt libs # QT_BINARY_DIR and QT_PLUGINS_DIR are set by FindQt4 CMake module #message(STATUS "QT_BINARY_DIR is ${QT_BINARY_DIR}") install(DIRECTORY "${QT_BINARY_DIR}/" DESTINATION "${KLF_INSTALL_LIB_DIR}" FILES_MATCHING PATTERN "libgcc*.dll" PATTERN "mingw*.dll" REGEX "/Qt(Core|Gui|Sql|Xml)4?\\.dll$" ) set(qtplugin_list ${KLF_INSTALL_QTPLUGINS_LIST}) set(qtplugin_list "dummyitem" ${qtplugin_list}) string(REGEX REPLACE ";" ";${QT_PLUGINS_DIR}/" qtplugin_list_temp "${qtplugin_list}") string(REGEX REPLACE "^dummyitem;" "" abs_qtplugin_list "${qtplugin_list_temp}") #install(FILES ${abs_qtplugin_list} DESTINATION "${KLF_INSTALL_QTPLUGINS_DIR}") foreach(qtplugin ${KLF_INSTALL_QTPLUGINS_LIST}) get_filename_component(qtplugin_dir "${qtplugin}" PATH) install(FILES "${QT_PLUGINS_DIR}/${qtplugin}" DESTINATION "${KLF_INSTALL_QTPLUGINS_DIR}/${qtplugin_dir}") endforeach(qtplugin) endif(WIN32 AND KLF_INSTALL_QTLIBS) # klatexformula bin if(NOT KLF_MACOSX_BUNDLES) if(KLF_INSTALL_KLATEXFORMULA_BIN) install(TARGETS klatexformula RUNTIME DESTINATION "${KLF_INSTALL_BIN_DIR}") endif(KLF_INSTALL_KLATEXFORMULA_BIN) if(UNIX AND KLF_INSTALL_KLATEXFORMULA_CMDL) install(CODE "message(STATUS \"Creating Symlink [\$ENV{DESTDIR}]${KLF_ABS_INSTALL_BIN_DIR}/klatexformula_cmdl -> klatexformula\") execute_process(COMMAND \"${CMAKE_COMMAND}\" -E create_symlink \"klatexformula\" \"\$ENV{DESTDIR}${KLF_ABS_INSTALL_BIN_DIR}/klatexformula_cmdl\")" ) elseif(WIN32 AND KLF_INSTALL_KLATEXFORMULA_CMDL) install(TARGETS klatexformula_cmdl RUNTIME DESTINATION "${KLF_INSTALL_BIN_DIR}") endif(UNIX AND KLF_INSTALL_KLATEXFORMULA_CMDL) endif(NOT KLF_MACOSX_BUNDLES) if(KLF_MACOSX_BUNDLES AND KLF_INSTALL_KLATEXFORMULA_BUNDLE) install(TARGETS klatexformula BUNDLE DESTINATION "${KLF_INSTALL_BIN_DIR}") # Update klatexformula's dependency on the installed frameworks. KLFInstFrameworkUpdateLibChange( "${KLF_INSTALL_BIN_DIR}/klatexformula-${KLF_VERSION}/Contents/MacOS/klatexformula-${KLF_VERSION}" "${CMAKE_CURRENT_BINARY_DIR}/klfbackend/klfbackend.framework/Versions/${KLF_LIB_VERSION}/klfbackend" "${KLF_INSTALL_LIB_DIR}/klfbackend.framework/Versions/${KLF_LIB_VERSION}/klfbackend" ) KLFInstFrameworkUpdateLibChange( "${KLF_INSTALL_BIN_DIR}/klatexformula-${KLF_VERSION}/Contents/MacOS/klatexformula-${KLF_VERSION}" "${CMAKE_CURRENT_BINARY_DIR}/klftools.framework/Versions/${KLF_LIB_VERSION}/klftools" "${KLF_INSTALL_LIB_DIR}/klftools.framework/Versions/${KLF_LIB_VERSION}/klftools" ) KLFInstFrameworkUpdateLibChange( "${KLF_INSTALL_BIN_DIR}/klatexformula-${KLF_VERSION}/Contents/MacOS/klatexformula-${KLF_VERSION}" "${CMAKE_CURRENT_BINARY_DIR}/klfapp.framework/Versions/${KLF_LIB_VERSION}/klfapp" "${KLF_INSTALL_LIB_DIR}/klfapp.framework/Versions/${KLF_LIB_VERSION}/klfapp" ) endif(KLF_MACOSX_BUNDLES AND KLF_INSTALL_KLATEXFORMULA_BUNDLE) # --- LINUX DESKTOP FILES --- if(KLF_INSTALL_DESKTOP) configure_file( "${CMAKE_SOURCE_DIR}/src/klatexformula.desktop.in" "${CMAKE_BINARY_DIR}/src/klatexformula.desktop" @ONLY) if(KLF_INSTALL_SHARE_APPLICATIONS_DIR) install(FILES "${CMAKE_BINARY_DIR}/src/klatexformula.desktop" DESTINATION "${KLF_INSTALL_SHARE_APPLICATIONS_DIR}" ) endif(KLF_INSTALL_SHARE_APPLICATIONS_DIR) if(KLF_INSTALL_SHARE_PIXMAPS_DIR) install(FILES klatexformula-128.png klatexformula-64.png klatexformula-32.png klatexformula-16.png DESTINATION "${KLF_INSTALL_SHARE_PIXMAPS_DIR}" ) endif(KLF_INSTALL_SHARE_PIXMAPS_DIR) if(KLF_INSTALL_ICON_THEME) install(FILES klatexformula-128.png DESTINATION "${KLF_INSTALL_ICON_THEME}/128x128/apps/" RENAME "klatexformula.png") install(FILES klatexformula-64.png DESTINATION "${KLF_INSTALL_ICON_THEME}/64x64/apps/" RENAME "klatexformula.png") install(FILES klatexformula-32.png DESTINATION "${KLF_INSTALL_ICON_THEME}/32x32/apps/" RENAME "klatexformula.png") install(FILES klatexformula-16.png DESTINATION "${KLF_INSTALL_ICON_THEME}/16x16/apps/" RENAME "klatexformula.png") endif(KLF_INSTALL_ICON_THEME) if(KLF_INSTALL_SHARE_MIME_PACKAGES_DIR) install(FILES "${CMAKE_SOURCE_DIR}/src/klatexformula-mime.xml" DESTINATION "${KLF_INSTALL_SHARE_MIME_PACKAGES_DIR}") endif(KLF_INSTALL_SHARE_MIME_PACKAGES_DIR) if(KLF_INSTALL_POST_UPDATEMIMEDATABASE) install(CODE "message(STATUS \"Updating Mime Types Database (update-mime-database)\") execute_process(COMMAND update-mime-database \"${CMAKE_INSTALL_PREFIX}/share/mime\")" ) endif(KLF_INSTALL_POST_UPDATEMIMEDATABASE) endif(KLF_INSTALL_DESKTOP) klatexformula-3.2.8/src/conf/000755 002161 000024 00000000000 12244200453 017057 5ustar00philippestaff000000 000000 klatexformula-3.2.8/src/data/000755 002161 000024 00000000000 12244200460 017041 5ustar00philippestaff000000 000000 klatexformula-3.2.8/src/i18n/000755 002161 000024 00000000000 12244200460 016707 5ustar00philippestaff000000 000000 klatexformula-3.2.8/src/klatexformula-128.png000644 002161 000024 00000005262 12244200461 022032 0ustar00philippestaff000000 000000 ‰PNG  IHDR€€Ã>aËsRGB®ÎébKGDÿÿÿ ½§“ pHYs¸Œ¸ŒÌö»/tIMEÙ *°®DtEXtCommentCreated with GIMPW IDATxÚí[HTßÇ×çâx¿æ¥Q¼¤‘fe…©¥šݤÀ2‚ º@—·$"(2A,èI‚^ì!4ê!­$‘)4‘,o¨!MÙ˜š¦Ž×ÇYÿõï8眱ßÿ÷§™}ÖâYg‹û¬ïÞ{íËÙ›CDB²ÈèA H € RBN¯à£¿¿Z[[¡¾¾zzz–î{yyA~~>ÄÄÄ@xx8ÈdŽYÖ8úgzôOœ8°tÅÄÄ`__ ÀÙ¨««Cç—––ÚM[[[‹®®®KiöìÙCp&t:* «’Ìqž9sF4]ee¥M °(‚û÷ï“œÙÙYÔh4VÎ[ü9??Ï›fll wíÚeãôå¿ïܹÍfó_ÏØáðáà×ë楟wîÜìÚ%%%Áû÷ï—Ú+oèï¡!rd@«ÕZ9ã88~ü8ošòòrøòå Øë]/þ€sñâE˜˜˜°)½Æ›¦ººÚ®ó,˪ž#ü%´Z-477ó–ÔÝ»w ¦«ªª²[º9ŽƒÐÐP $8*7nÜàm¿233í ®Ùµïß¿  ;"ÍÍÍ‘‘SSS66µZ 555žžþÇm;ÇqV$ÅJ{{;ÌÌÌðÚ<<< 88X0í… D_¿~¥¹Gennsrr¬úí˯7Š¦×ëõèææÆ;œœŒ•_ªx¢s±þ¹»»»húÐÐP˜šš‚ââbHNN†ÈÈHÈÎΆ††hhh€¸¸8‡Ê/Å+˜ŸŸ¹\nÕ^/§¤¤®\¹ÂL~©XÁõë×Eƒ4???¦òKXAGG‡ht_XXÈT~© àq´Põß¿§€Uº»»E«ÿ0—gÀ2ºººDíiii$–)//µ§¦¦’XfzzZÐæââ...$V ðÀÃÃÀ*&“ ŒF£ =** Ôj5 €Ut:ôõõ Ú5 Èår«|þüYø%Éd°nÝ:&óMX@«ÕŠ `Ó¦MLæ›Fðññññq^›J¥‚±±1puu%°ŠÐJŽã@¥R .¡&€ž={&hCDؾ};³y'ÀÏŸ?EíyyyìfžÅe]SSS˜ŸŸ/¸¬‹ïZùù–½ûbWPPjµZ§xWLÖÃÃÃPQQñ§áî‹ÅƒƒƒÐÚÚJMÀßèþæçWÎ2oÀd/Àh4ÂíÛ·¡··×î³£££ðúõk0›Í¼öøøxHLL\uM`6›!77Nž,yˆm¡R©àСC$–û E÷  n ñÆÇ»»»ÍñT0ÆÐÐà0ëóÿ’@IIÉ’³ùÈÏÏ'°ÌÈȈ¨=>>^RïCr1@HH ð¶ÿR™–t 099)ý³¾Xòhoo"0ÎÄÄ„h¿eËËTVV‚Éd´§¤¤XÅb±ˆöüýýA£ÑXevvÚÚÚínnn’š’œL&èt:A{hh¨ài $0022Â;Ìq(•J"’À?–úû|cÙÙÙ$–yüø±¨=<<\’ÌPðæÍ›y7n’ê°ä v”§§' jXåÅ‹‚í?8φN$€†Øpd÷ORMÀÞ½{¡¦¦F°ýŸ˜˜`ò8ªú!00¤ óý$**ŠÉ£`H LOO‹•––&™ï%)€OŸ>A¿ ÝÇLJš–á[ÿ·ˆJ¥bú0¼zõJЦT*aëÖ­$–› ¢^€b¡ÝÀ¤öˆä°¸˜o€cÇŽ‘XÎÜÝ»wyï#"(•Jˆ‹‹#°œ¹¦¦&AÛ¾}û€`|.@.—ƒÅbálll„;vP ÀjÆ:;;A&“ñ:ßßß|}}©ø³,€^çsQQQ’]&¼{÷Ž÷´D„ŒŒ IÿKBb‡A>}š<ϲ ÔÖÖòÚ¼½½%qȪeGÿŸ?2™ L&9rdUi¦§§¡»»Û¦íGD¨¯¯'¯¯h’ÎÎNT«ÕV‡8Êår,..F‹Å"šV§ÓñŒ333Hü‡ÀÍ›7EOç¾wïžhú³gÏò¦»zõ*yÜ‘`±X°¨¨Èî±í®®®822"|ªLf“F­Vc]]yÜ‘Ž‡ÒÒÒ¥îšF£>|øÀkkii‹Åbs?22222¨Íwä^@EELNN®êØw¡Ó¾‹‹‹m‚?€7oÞ·=k÷/Žãã8Þôƒ£££mš²²2ªëY8=|±+wéÒ%^{WW—Õ0ÇqG¥’î,5€Xð·Ì uå ­j À‡R1w–^@ff¦¨óCBB°¥¥…7íÈȈ€òòòÈÃÎ$­VkÕÎ/:266oݺ…½½½‚i¬Ä’žžNÞu6ÌÍÍaJJÊ’£¢¢°¾¾^4ÙlƃZ ÇÇLJ††È»Î8ØÖÖ†ÁÁÁV¥¹¨¨{zzP¯×[=ÛÞÞŽçγªú#""ptt”<»JrI˜^¯‡¸¸80 K‘ÿš5kÀÍÍ 4 "ÌÍÍAOOŒL&‹ÅðàÁðöö¦èÞÙ'ƒ‹ŠŠÐËË  …``¨P(ÐÅÅ›šš¨8³R,gxxÞ¾} ½½½PUU …<<< )) !77W2çüýëc+Ž.€åÌÎÎ. íJysGÉ €`|2ˆ $‚@A H €øÿñ.K _œ QIEND®B`‚klatexformula-3.2.8/src/klatexformula-16.png000644 002161 000024 00000000437 12244200461 021745 0ustar00philippestaff000000 000000 ‰PNG  IHDR‘h6 pHYs¸Œ¸ŒÌö»/tIMEÕ5æ̇G¾IDATxÚcüÿÿ?)€\GG‡Ðëׯ«««á‚L¸TïÝ»÷þýûœœœÏŸ?G‘øΚ5 S§ gÏž544$Ê÷îÝ[³fÍÙ³gwïÞýôéSÂNº{÷®¶¶6V)ìNºpá‚V)*i8þÉçL¹Ìð0ûÎì¾>J)x<ŽweÏçs8jš’Éd¿ßç8îï©”=lÛ–e¹ÙlB–Ëe6› ¿%»ÌçsX,”ÒD"Š¢| IBÈ0 J©¢(²,›¦ù5Æ8 e2Û¶ä3O‘®ëcABžŒé~¿Q½Úƒãñ…BÁa¾Ïá&ÇcUU@UUÓ4ÏóÐëõªÕê§Óé|>BÚív$™N§ïób±‹Å>U2®ëP«Õœ—°i i‚àÕc÷8WØ%€© !ñxœã8Œ±'†q½^s¹\0ôäŠ4M£”:ßafÀápxþ¿`9NûýþÇãÁ´›N–e!„DQdý?óWúõz•Ëe¯lËn·I’˜ ˆÃN[­Ïó¬|º"˲J¥R>ŸÇB¶Ûm·Û _ë`4@4½ßï«Õ*_.äWÀz½N¥R›Íæv»U*•ÉdB]ŧMUÕÙlF)ít:õzÝÉôý÷îú;)?íÏù …IEND®B`‚klatexformula-3.2.8/src/klatexformula-64.png000644 002161 000024 00000002107 12244200461 021744 0ustar00philippestaff000000 000000 ‰PNG  IHDR@@% æ‰ pHYs¸Œ¸ŒÌö»/tIMEÕ÷`8æIDATxÚíšKKóLÇ'ÁÆV*^ª ÑE£µE[c½´Ö*((YÔ…à'ðòŠ Á.\ˆàp§+ìÂUAÅÖÚ[ÚÞЪØê¢ ‰—˜w1/ó†wõ<­‰ð¬þ9MgòcÎ$çÌ !Ë2ÀÙH€¹ýü´•ýH¯Á`pkk+•Jɲl±X|>ßÔÔ#Íf'''GFF‚Á ˲‚ ÌÎÎööö^]]Ò¢¬¡ÝÞÞ:˲’$A§$I‹‹‹Ey<žÚÔ ¿¿ ×ëïïï¡çôô´©©éßh.+K$¥ °¶¶ttt9}>ßÑL’¡P¨thš†º°°€œ&“ ÔÕÕ¡¸úsÓh››¨=ò ¡øYYY!I²D'ñôô4쮼¼üááAùÓÒÒ’ßï?99)¬el6°Z­ßÛ²!tqq‘Éd f¿T"‹‰¢uWW~ápéÎÎNü’É$ƒ¡­­ ?€³³3ô¦onnÆ àúú:›ÍBÝÞÞŽ_=N§¿¾¾ v:Ôápøùù]îìì ýþþ¾··§¼™¦éÖÖÖ¢úûÞÏJ ø«tÀápÙã7€Ýn÷ûýoooȳ¾¾/+++gff”7r¡Rÿ™ A N.ÔÄ0¿Wo«þŠÇãHwttàH$Ær8Žƒ‚¢(—Ë…Àëë+Ê¢[ZZt:f<Ï¿¼¼ ÷=~K‹©TJ’$•ê-4˜Áê 2€¢(,CèòòŠ††³ÙŒÀùùùÓÓÔhI'Žã>??U*äµP&êÍ`uG N§R¤.ÏóPÔÔÔØívÌr¹ZÊU£W ™L¢2 §§?€h4Š4–Ê$¢»»?€X,…ÉdRõ+¦ ÀãããÝÝ6ñ£ @:þøø€nKb‰DÐ+hpp?€ããc(ªªª¼^/~(‰p¹\˜d2™\.µržçA †±±1üÐvX__ŸÅb)]€ÍÍM¯×k³Ù–——•þ££#Ahg[u+`Axcc­9+˜ˆ¢X[[  iZ³#…ŒÀêêªò¬#ÚÑØÝÝÍçó€ùùy ™]__þ><<Œüããã·Û­å¤BX–%¢±±qnn.ŸÏCçÁÁI’ÕÕÕñx¼ÔB¡Ñhôù|(ú#‘ˆÙl6ÛÛÛ²¶VàÓþþ¾Ûí¦(Êjµ2 £×ëNçáᡬ¹Å=ŽF£lj¢È0ÌÀÀø +  ì÷èñ/@‘öþ€±îðÈÐHIEND®B`‚klatexformula-3.2.8/src/klatexformula-mime.xml000644 002161 000024 00000002257 12244200461 022464 0ustar00philippestaff000000 000000 KLatexFormula Library Export Exportation de Bibliothèque KLatexFormula KLatexFormula Library Resource (Sqlite DB) Ressource KLatexFormula (BD Sqlite) klatexformula-3.2.8/src/klatexformula.desktop.in000644 002161 000024 00000000675 12244200461 023017 0ustar00philippestaff000000 000000 [Desktop Entry] Name=KLatexFormula GenericName=KLatexFormula Comment=Generate images from LaTeX equations Comment[fr]=Générez une image d'une équation LaTeX Categories=@KLF_INSTALL_DESKTOP_CATEGORIES@ MimeType=application/x-klatexformula;application/x-klatexformula-db; Exec=@KLF_ABS_INSTALL_BIN_DIR@/klatexformula %F Icon=@KLF_INSTALL_DESKTOP_ICON@ Type=Application Terminal=false X-KDE-StartupNotify=true X-KDE-AuthorizeAction=shell_access klatexformula-3.2.8/src/klfaboutdialog.ui000644 002161 000024 00000014076 12244200461 021467 0ustar00philippestaff000000 000000 KLFAboutDialog Qt::NonModal 0 0 717 395 About KLatexFormula :/pics/klatexformula-128.png:/pics/klatexformula-128.png QDialog#KLFAboutDialog .QFrame#frmAboutArea { background-image: url(:/pics/helpdialogbg.png); background-clip: padding; } QDialog#KLFAboutDialog .QTextBrowser#txtDisplay { border: 1px solid black; color: rgb(0, 0, 0); background-color: rgba(255, 255, 255, 200); } false false 10 1 1 1 5 QFrame::NoFrame QFrame::Plain 0 0 5 0 Qt::Horizontal QSizePolicy::Fixed 200 20 400 300 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:10pt; font-weight:400; font-style:normal;"> <p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p></body></html> false false 0 0 0 0 Qt::Horizontal 186 20 Qt::Horizontal 185 20 250 0 OK :/pics/ok.png:/pics/ok.png true Qt::Horizontal 186 20 btnOK clicked() KLFAboutDialog accept() 289 386 246 407 klatexformula-3.2.8/src/klfbackend/000755 002161 000024 00000000000 12244200460 020214 5ustar00philippestaff000000 000000 klatexformula-3.2.8/src/klfconfig.cpp000644 002161 000024 00000104564 12244200461 020611 0ustar00philippestaff000000 000000 /*************************************************************************** * file klfconfig.cpp * This file is part of the KLatexFormula Project. * Copyright (C) 2011 by Philippe Faist * philippe.faist at bluewin.ch * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ /* $Id: klfconfig.cpp 627 2011-04-12 12:36:22Z phfaist $ */ #include #include #include #include #include #include #include #include #include #include #include // icon view flow #include #include // "My Documents" or "Documents" directory #include #include #include "klfmain.h" #include "klfconfig.h" static const char * __klf_fallback_share_dir = #if defined(Q_OS_WIN32) || defined(Q_OS_WIN64) // windows ".."; // note: program is in a bin/ directory by default (this is for nsis-installer) #elif defined(Q_OS_MAC) || defined(Q_OS_DARWIN) // Mac OS X "../Resources"; #else // unix-like system "../share/klatexformula"; #endif static const char * __klf_share_dir = #ifdef KLF_SHARE_DIR // defined by the build system KLF_SHARE_DIR; #else NULL; #endif static QString __klf_share_dir_cached; KLF_EXPORT QString klf_share_dir_abspath() { if (!__klf_share_dir_cached.isEmpty()) return __klf_share_dir_cached; klfDbg(klfFmtCC("cmake-share-dir=%s; fallback-share-dir=%s\n", __klf_share_dir, __klf_fallback_share_dir)) ; QString sharedir; if (__klf_share_dir != NULL) sharedir = QLatin1String(__klf_share_dir); else sharedir = QLatin1String(__klf_fallback_share_dir); __klf_share_dir_cached = klfPrefixedPath(sharedir); // prefixed by app-dir-path klfDbg("share dir is "<<__klf_share_dir_cached) ; return __klf_share_dir_cached; } // global variable to access our config // remember to initialize it in main() in main.cpp ! KLFConfig klfconfig; /*void settings_write_QTextCharFormat(QSettings& s, const QString& basename, const QTextCharFormat& charfmt) { s.setValue(basename+"_charformat", charfmt); } */ static QTextCharFormat settings_read_QTextCharFormat(QSettings& s, const QString& basename, const QTextCharFormat& dflt) { QVariant val = s.value(basename+"_charformat", dflt); QTextFormat tf = val.value(); return tf.toCharFormat(); } /* template void settings_write_list(QSettings& s, const QString& basename, const QList& list) { QList l; int k; for (k = 0; k < list.size(); ++k) l.append(QVariant(list[k])); s.setValue(basename+"_list", l); } */ template static QList settings_read_list(QSettings& s, const QString& basename, const QList& dflt) { QList l = s.value(basename+"_list", QList()).toList(); if (l.size() == 0) return dflt; QList list; int k; for (k = 0; k < l.size(); ++k) list.append(l[k].value()); return list; } // ----------------------------------------------------- KLFConfig::KLFConfig() { } #define KLFCONFIG_TEST_FIXED_FONT(found_fcode, fdb, fcode, f, fps) \ if (!found_fcode && fdb.isFixedPitch(f)) { \ fcode = QFont(f, fps); \ found_fcode = true; \ } static int adjust_font_size(QFont f, int idealMXHeightPx) { // idealMXHeightPx is the ideal height of the string "MX" in pixels. int ps = QFontInfo(f).pointSize(); // start with a little bit smaller font ps -= 3; const int cutoff = 20; //just a cutoff to be sure // and increase font size up to something "ideal" while (ps < cutoff && QFontMetrics(f).size(Qt::TextSingleLine, "MX").height() < idealMXHeightPx) { f.setPointSize(++ps); klfDbg(f.family()<<": Will try instead with font size="<= cutoff) ps = 10; // the default point size in bad case scenario return ps; } void KLFConfig::loadDefaults() { KLF_DEBUG_TIME_BLOCK(KLF_FUNC_NAME) ; homeConfigDir = QDir::homePath() + "/.klatexformula"; globalShareDir = klf_share_dir_abspath(); homeConfigSettingsFile = homeConfigDir + "/klatexformula.conf"; homeConfigSettingsFileIni = homeConfigDir + "/config"; homeConfigDirRCCResources = homeConfigDir + "/rccresources"; homeConfigDirPlugins = homeConfigDir + "/plugins"; homeConfigDirPluginData = homeConfigDir + "/plugindata"; homeConfigDirI18n = homeConfigDir + "/i18n"; //debug: QMessageBox::information(0, "", QString("global share dir=")+globalShareDir); if (qApp->inherits("QApplication")) { // and not QCoreApplication... QFontDatabase fdb; QFont f = QApplication::font(); //#ifdef Q_WS_X11 // // setting pixel size avoids bug with Qt/X11 of fonts having their metrics badly calculated (...?) // f.setPixelSize(15); //#endif defaultStdFont = f; QFont cmuappfont = f; if (fdb.families().contains("CMU Sans Serif")) { // CMU Sans Serif is available ;-) int fps = QFontInfo(f).pointSize(); cmuappfont = QFont("CMU Sans Serif", fps); // ideal height of the string "MX" in pixels. This value was CAREFULLY ADJUSTED. // please change it only if you feel sure. (fonts have to look nice on most platforms) #ifdef Q_WS_X11 int fIdealHeight = 17; #else int fIdealHeight = 15; #endif fps = adjust_font_size(cmuappfont, fIdealHeight); cmuappfont.setPointSize(fps); } QFont fcode; bool found_fcode = false; int ps = 11; KLFCONFIG_TEST_FIXED_FONT(found_fcode, fdb, fcode, "Courier 10 Pitch", ps); KLFCONFIG_TEST_FIXED_FONT(found_fcode, fdb, fcode, "ETL Fixed", ps); KLFCONFIG_TEST_FIXED_FONT(found_fcode, fdb, fcode, "Courier New", ps); KLFCONFIG_TEST_FIXED_FONT(found_fcode, fdb, fcode, "Efont Fixed", ps); KLFCONFIG_TEST_FIXED_FONT(found_fcode, fdb, fcode, "Adobe Courier", ps); KLFCONFIG_TEST_FIXED_FONT(found_fcode, fdb, fcode, "Courier", ps); KLFCONFIG_TEST_FIXED_FONT(found_fcode, fdb, fcode, "Misc Fixed", ps); KLFCONFIG_TEST_FIXED_FONT(found_fcode, fdb, fcode, "Monospace", ps); if ( ! found_fcode ) fcode = f; // guess good font size for code font #ifdef Q_WS_X11 int fcodeIdealHeight = 20; // the ideal height of the string "MX" in pixels #else int fcodeIdealHeight = 18; // the ideal height of the string "MX" in pixels #endif // #if QT_VERSION < 0x040500 // fcodeIdealHeight += 2; // fix for Qt 4.4 // #endif ps = adjust_font_size(fcode, fcodeIdealHeight); fcode.setPointSize(ps); QFont fcodeMain = fcode; fcodeMain.setPointSize(ps+1); // by default, this is first run! Core.thisVersionMajFirstRun = true; Core.thisVersionMajMinFirstRun = true; Core.thisVersionMajMinRelFirstRun = true; Core.thisVersionExactFirstRun = true; Core.libraryFileName = "library.klf.db"; Core.libraryLibScheme = "klf+sqlite"; defaultCMUFont = cmuappfont; defaultTTFont = fcode; UI.locale = QLocale::system().name(); klfDbg("System locale: "<(); UI.userColorList.append(QColor(0,0,0)); UI.userColorList.append(QColor(255,255,255)); UI.userColorList.append(QColor(170,0,0)); UI.userColorList.append(QColor(0,0,128)); UI.userColorList.append(QColor(0,0,255)); UI.userColorList.append(QColor(0,85,0)); UI.userColorList.append(QColor(255,85,0)); UI.userColorList.append(QColor(0,255,255)); UI.userColorList.append(QColor(85,0,127)); UI.userColorList.append(QColor(128,255,255)); UI.colorChooseWidgetRecent = QList(); UI.colorChooseWidgetCustom = QList(); UI.maxUserColors = 12; UI.enableToolTipPreview = false; UI.enableRealTimePreview = true; UI.autosaveLibraryMin = 5; UI.showHintPopups = true; UI.clearLatexOnly = false; UI.copyExportProfile = "default"; UI.dragExportProfile = "default"; UI.glowEffect = false; UI.glowEffectColor = QColor(128, 255, 128, 12); UI.glowEffectRadius = 4; UI.customMathModes = QStringList(); UI.showExportProfilesLabel = true; UI.menuExportProfileAffectsDrag = true; UI.menuExportProfileAffectsCopy = true; SyntaxHighlighter.configFlags = 0x05; SyntaxHighlighter.fmtKeyword = QTextCharFormat(); SyntaxHighlighter.fmtKeyword.setForeground(QColor(0, 0, 128)); SyntaxHighlighter.fmtComment = QTextCharFormat(); SyntaxHighlighter.fmtComment.setForeground(QColor(180, 0, 0)); SyntaxHighlighter.fmtComment.setFontItalic(true); SyntaxHighlighter.fmtParenMatch = QTextCharFormat(); SyntaxHighlighter.fmtParenMatch.setBackground(QColor(180, 238, 180)); SyntaxHighlighter.fmtParenMismatch = QTextCharFormat(); SyntaxHighlighter.fmtParenMismatch.setBackground(QColor(255, 20, 147)); SyntaxHighlighter.fmtLonelyParen = QTextCharFormat(); SyntaxHighlighter.fmtLonelyParen.setForeground(QColor(255, 0, 255)); SyntaxHighlighter.fmtLonelyParen.setFontWeight(QFont::Bold); } // invalid value, by convention ".". if the config is not read from file, then settings will // be detected in detectMissingSettings() BackendSettings.tempDir = "."; BackendSettings.execLatex = "."; BackendSettings.execDvips = "."; BackendSettings.execGs = "."; BackendSettings.execEpstopdf = "."; BackendSettings.execenv = QStringList(); BackendSettings.lborderoffset = 0; BackendSettings.tborderoffset = 0; BackendSettings.rborderoffset = 0; BackendSettings.bborderoffset = 0; BackendSettings.outlineFonts = true; LibraryBrowser.colorFound = QColor(128, 255, 128); LibraryBrowser.colorNotFound = QColor(255, 128, 128); LibraryBrowser.restoreURLs = false; LibraryBrowser.confirmClose = true; LibraryBrowser.groupSubCategories = true; LibraryBrowser.iconViewFlow = QListView::TopToBottom; LibraryBrowser.historyTagCopyToArchive = true; LibraryBrowser.lastFileDialogPath = // "My Documents": QDesktopServices::storageLocation(QDesktopServices::DocumentsLocation); LibraryBrowser.treePreviewSizePercent = 75; LibraryBrowser.listPreviewSizePercent = 75; LibraryBrowser.iconPreviewSizePercent = 100; Plugins.pluginConfig = QMap< QString, QMap >(); } void KLFConfig::detectMissingSettings() { int neededsettings = !BackendSettings.tempDir.compare(".") << 0 | !BackendSettings.execLatex.compare(".") << 1 | !BackendSettings.execDvips.compare(".") << 2 | !BackendSettings.execGs.compare(".") << 3 | !BackendSettings.execEpstopdf.compare(".") << 4 ; if (neededsettings) { KLFBackend::klfSettings defaultsettings; KLFBackend::detectSettings(&defaultsettings); if (neededsettings & (1<<0)) BackendSettings.tempDir = defaultsettings.tempdir; if (neededsettings & (1<<1)) BackendSettings.execLatex = defaultsettings.latexexec; if (neededsettings & (1<<2)) BackendSettings.execDvips = defaultsettings.dvipsexec; if (neededsettings & (1<<3)) BackendSettings.execGs = defaultsettings.gsexec; if (neededsettings & (1<<4)) BackendSettings.execEpstopdf = defaultsettings.epstopdfexec; BackendSettings.execenv << defaultsettings.execenv; } } int KLFConfig::ensureHomeConfigDir() { if ( !klfEnsureDir(homeConfigDir) ) return -1; if ( !klfEnsureDir(homeConfigDirRCCResources) ) return -1; if ( !klfEnsureDir(homeConfigDirPlugins) ) return -1; if ( !klfEnsureDir(homeConfigDirPluginData) ) return -1; if ( !klfEnsureDir(homeConfigDirI18n) ) return -1; return 0; } bool KLFConfig::checkExePaths() { return QFileInfo(BackendSettings.execLatex).isExecutable() && QFileInfo(BackendSettings.execDvips).isExecutable() && QFileInfo(BackendSettings.execGs).isExecutable() && ( BackendSettings.execEpstopdf.isEmpty() || QFileInfo(BackendSettings.execEpstopdf).isExecutable()) ; } int KLFConfig::readFromConfig() { klfDbgT(" reading config.") ; ensureHomeConfigDir(); QString globalconfig = globalShareDir+"/klatexformula.conf"; klfDbg("Testing for global config file "< static void klf_config_read(QSettings &s, const QString& baseName, T *target, const char * listOrMapType = NULL) { // qDebug("klf_config_read<...>(%s)", qPrintable(baseName)); QVariant defVal = QVariant::fromValue(*target); QVariant valstrv = s.value(baseName, QVariant()); // klfDbg( "\tRead value "<(); } template<> void klf_config_read(QSettings &s, const QString& baseName, QTextCharFormat *target, const char * /*listOrMapType*/) { qDebug("klf_config_read(%s)", qPrintable(baseName)); QTextFormat fmt = *target; klf_config_read(s, baseName, &fmt); *target = fmt.toCharFormat(); } template static void klf_config_read_list(QSettings &s, const QString& baseName, QList *target) { QVariantList vlist = klfListToVariantList(*target); klf_config_read(s, baseName, &vlist, QVariant::fromValue(T()).typeName()); *target = klfVariantListToList(vlist); } template static void klf_config_write(QSettings &s, const QString& baseName, const T * value) { QVariant val = QVariant::fromValue(*value); QByteArray datastr = klfSaveVariantToText(val); s.setValue(baseName, QVariant::fromValue(QString::fromLocal8Bit(datastr))); } template static void klf_config_write_list(QSettings &s, const QString& baseName, const QList * target) { QVariantList vlist = klfListToVariantList(*target); klf_config_write(s, baseName, &vlist); } static QString firstRunConfigKey(int N) { QString s = QString("versionFirstRun-%1_").arg(N); if (N >= 4) return s + QLatin1String(KLF_VERSION_STRING); if (N-- > 0) s += QString("%1").arg(KLF_VERSION_MAJ); if (N-- > 0) s += QString(".%1").arg(KLF_VERSION_MIN); if (N-- > 0) s += QString(".%1").arg(KLF_VERSION_REL); return s; } int KLFConfig::readFromConfig_v2(const QString& fname) { KLF_DEBUG_TIME_BLOCK(KLF_FUNC_NAME) ; QSettings s(fname, QSettings::IniFormat); qDebug("Reading base configuration"); s.beginGroup("Core"); klf_config_read(s, firstRunConfigKey(1), &Core.thisVersionMajFirstRun); klf_config_read(s, firstRunConfigKey(2), &Core.thisVersionMajMinFirstRun); klf_config_read(s, firstRunConfigKey(3), &Core.thisVersionMajMinRelFirstRun); klf_config_read(s, firstRunConfigKey(4), &Core.thisVersionExactFirstRun); klf_config_read(s, "libraryfilename", &Core.libraryFileName); klf_config_read(s, "librarylibscheme", &Core.libraryLibScheme); s.endGroup(); s.beginGroup("UI"); klf_config_read(s, "locale", &UI.locale); klf_config_read(s, "usesystemfont", &UI.useSystemAppFont); klf_config_read(s, "applicationfont", &UI.applicationFont); klf_config_read(s, "latexeditfont", &UI.latexEditFont); klf_config_read(s, "preambleeditfont", &UI.preambleEditFont); klf_config_read(s, "previewtooltipmaxsize", &UI.previewTooltipMaxSize); klf_config_read(s, "lbloutputfixedsize", &UI.labelOutputFixedSize); klf_config_read(s, "lastsavedir", &UI.lastSaveDir); klf_config_read(s, "symbolsperline", &UI.symbolsPerLine); klf_config_read_list(s, "usercolorlist", &UI.userColorList); klf_config_read_list(s, "colorchoosewidgetrecent", &UI.colorChooseWidgetRecent); klf_config_read_list(s, "colorchoosewidgetcustom", &UI.colorChooseWidgetCustom); klf_config_read(s, "maxusercolors", &UI.maxUserColors); klf_config_read(s, "enabletooltippreview", &UI.enableToolTipPreview); klf_config_read(s, "enablerealtimepreview", &UI.enableRealTimePreview); klf_config_read(s, "autosavelibrarymin", &UI.autosaveLibraryMin); klf_config_read(s, "showhintpopups", &UI.showHintPopups); klf_config_read(s, "clearlatexonly", &UI.clearLatexOnly); klf_config_read(s, "copyexportprofile", &UI.copyExportProfile); klf_config_read(s, "dragexportprofile", &UI.dragExportProfile); klf_config_read(s, "gloweffect", &UI.glowEffect); klf_config_read(s, "gloweffectcolor", &UI.glowEffectColor); klfDbg("Read glow effect color from config: color="<(s, "keyword", &SyntaxHighlighter.fmtKeyword); klf_config_read(s, "comment", &SyntaxHighlighter.fmtComment); klf_config_read(s, "parenmatch", &SyntaxHighlighter.fmtParenMatch); klf_config_read(s, "parenmismatch", &SyntaxHighlighter.fmtParenMismatch); klf_config_read(s, "lonelyparen", &SyntaxHighlighter.fmtLonelyParen); s.endGroup(); s.beginGroup("BackendSettings"); klf_config_read(s, "tempdir", &BackendSettings.tempDir); klf_config_read(s, "latexexec", &BackendSettings.execLatex); klf_config_read(s, "dvipsexec", &BackendSettings.execDvips); klf_config_read(s, "gsexec", &BackendSettings.execGs); klf_config_read(s, "epstopdfexec", &BackendSettings.execEpstopdf); klf_config_read(s, "execenv", &BackendSettings.execenv); klf_config_read(s, "lborderoffset", &BackendSettings.lborderoffset); klf_config_read(s, "tborderoffset", &BackendSettings.tborderoffset); klf_config_read(s, "rborderoffset", &BackendSettings.rborderoffset); klf_config_read(s, "bborderoffset", &BackendSettings.bborderoffset); klf_config_read(s, "outlinefonts", &BackendSettings.outlineFonts); s.endGroup(); s.beginGroup("LibraryBrowser"); klf_config_read(s, "colorfound", &LibraryBrowser.colorFound); klf_config_read(s, "colornotfound", &LibraryBrowser.colorNotFound); klf_config_read(s, "restoreurls", &LibraryBrowser.restoreURLs); klf_config_read(s, "confirmclose", &LibraryBrowser.confirmClose); klf_config_read(s, "groupsubcategories", &LibraryBrowser.groupSubCategories); klf_config_read(s, "iconviewflow", &LibraryBrowser.iconViewFlow); klf_config_read(s, "historytagcopytoarchive", &LibraryBrowser.historyTagCopyToArchive); klf_config_read(s, "lastfiledialogpath", &LibraryBrowser.lastFileDialogPath); klf_config_read(s, "treepreviewsizepercent", &LibraryBrowser.treePreviewSizePercent); klf_config_read(s, "listpreviewsizepercent", &LibraryBrowser.listPreviewSizePercent); klf_config_read(s, "iconpreviewsizepercent", &LibraryBrowser.iconPreviewSizePercent); s.endGroup(); // Special treatment for Plugins.pluginConfig // for reading, we cannot rely on klf_plugins since we are called before plugins are loaded! int k, j; QDir plugindatadir = QDir(homeConfigDirPluginData); QStringList plugindirs = plugindatadir.entryList(QDir::Dirs); for (k = 0; k < plugindirs.size(); ++k) { if (plugindirs[k] == "." || plugindirs[k] == "..") continue; qDebug("Reading config for plugin %s", qPrintable(plugindirs[k])); QString fn = plugindatadir.absoluteFilePath(plugindirs[k])+"/"+plugindirs[k]+".conf"; if ( ! QFile::exists(fn) ) { qDebug("\tskipping plugin %s since the file %s does not exist.", qPrintable(plugindirs[k]), qPrintable(fn)); continue; } QSettings psettings(fn, QSettings::IniFormat); QVariantMap pconfmap; QStringList keys = psettings.allKeys(); for (j = 0; j < keys.size(); ++j) { pconfmap[keys[j]] = psettings.value(keys[j]); } Plugins.pluginConfig[plugindirs[k]] = pconfmap; } // POST-CONFIG-READ SETUP // forbid empty locale if (klfconfig.UI.locale.isEmpty()) klfconfig.UI.locale = "en_US"; // set Qt default locale to ours QLocale::setDefault(klfconfig.UI.locale); return 0; } int KLFConfig::writeToConfig() { ensureHomeConfigDir(); QSettings s(homeConfigSettingsFile, QSettings::IniFormat); bool thisVersionFirstRunFalse = false; s.beginGroup("Core"); klf_config_write(s, firstRunConfigKey(1), &thisVersionFirstRunFalse); klf_config_write(s, firstRunConfigKey(2), &thisVersionFirstRunFalse); klf_config_write(s, firstRunConfigKey(3), &thisVersionFirstRunFalse); klf_config_write(s, firstRunConfigKey(4), &thisVersionFirstRunFalse); klf_config_write(s, "libraryfilename", &Core.libraryFileName); klf_config_write(s, "librarylibscheme", &Core.libraryLibScheme); s.endGroup(); s.beginGroup("UI"); klf_config_write(s, "locale", &UI.locale); klf_config_write(s, "usesystemfont", &UI.useSystemAppFont); klf_config_write(s, "applicationfont", &UI.applicationFont); klf_config_write(s, "latexeditfont", &UI.latexEditFont); klf_config_write(s, "preambleeditfont", &UI.preambleEditFont); klf_config_write(s, "previewtooltipmaxsize", &UI.previewTooltipMaxSize); klf_config_write(s, "lbloutputfixedsize", &UI.labelOutputFixedSize); klf_config_write(s, "lastsavedir", &UI.lastSaveDir); klf_config_write(s, "symbolsperline", &UI.symbolsPerLine); klf_config_write_list(s, "usercolorlist", &UI.userColorList); klf_config_write_list(s, "colorchoosewidgetrecent", &UI.colorChooseWidgetRecent); klf_config_write_list(s, "colorchoosewidgetcustom", &UI.colorChooseWidgetCustom); klf_config_write(s, "maxusercolors", &UI.maxUserColors); klf_config_write(s, "enabletooltippreview", &UI.enableToolTipPreview); klf_config_write(s, "enablerealtimepreview", &UI.enableRealTimePreview); klf_config_write(s, "autosavelibrarymin", &UI.autosaveLibraryMin); klf_config_write(s, "showhintpopups", &UI.showHintPopups); klf_config_write(s, "clearlatexonly", &UI.clearLatexOnly); klf_config_write(s, "copyexportprofile", &UI.copyExportProfile); klf_config_write(s, "dragexportprofile", &UI.dragExportProfile); klf_config_write(s, "gloweffect", &UI.glowEffect); klf_config_write(s, "gloweffectcolor", &UI.glowEffectColor); klf_config_write(s, "gloweffectradius", &UI.glowEffectRadius); klf_config_write(s, "custommathmodes", &UI.customMathModes); klf_config_write(s, "showexportprofileslabel", &UI.showExportProfilesLabel); klf_config_write(s, "menuexportprofileaffectsdrag", &UI.menuExportProfileAffectsDrag); klf_config_write(s, "menuexportprofileaffectscopy", &UI.menuExportProfileAffectsCopy); s.endGroup(); s.beginGroup("SyntaxHighlighter"); klf_config_write(s, "configflags", &SyntaxHighlighter.configFlags); klf_config_write(s, "keyword", &SyntaxHighlighter.fmtKeyword); klf_config_write(s, "comment", &SyntaxHighlighter.fmtComment); klf_config_write(s, "parenmatch", &SyntaxHighlighter.fmtParenMatch); klf_config_write(s, "parenmismatch", &SyntaxHighlighter.fmtParenMismatch); klf_config_write(s, "lonelyparen", &SyntaxHighlighter.fmtLonelyParen); s.endGroup(); s.beginGroup("BackendSettings"); klf_config_write(s, "tempdir", &BackendSettings.tempDir); klf_config_write(s, "latexexec", &BackendSettings.execLatex); klf_config_write(s, "dvipsexec", &BackendSettings.execDvips); klf_config_write(s, "gsexec", &BackendSettings.execGs); klf_config_write(s, "epstopdfexec", &BackendSettings.execEpstopdf); klf_config_write(s, "execenv", &BackendSettings.execenv); klf_config_write(s, "lborderoffset", &BackendSettings.lborderoffset); klf_config_write(s, "tborderoffset", &BackendSettings.tborderoffset); klf_config_write(s, "rborderoffset", &BackendSettings.rborderoffset); klf_config_write(s, "bborderoffset", &BackendSettings.bborderoffset); klf_config_write(s, "outlinefonts", &BackendSettings.outlineFonts); s.endGroup(); s.beginGroup("LibraryBrowser"); klf_config_write(s, "colorfound", &LibraryBrowser.colorFound); klf_config_write(s, "colornotfound", &LibraryBrowser.colorNotFound); klf_config_write(s, "restoreurls", &LibraryBrowser.restoreURLs); klf_config_write(s, "confirmclose", &LibraryBrowser.confirmClose); klf_config_write(s, "groupsubcategories", &LibraryBrowser.groupSubCategories); klf_config_write(s, "iconviewflow", &LibraryBrowser.iconViewFlow); klf_config_write(s, "historytagcopytoarchive", &LibraryBrowser.historyTagCopyToArchive); klf_config_write(s, "lastfiledialogpath", &LibraryBrowser.lastFileDialogPath); klf_config_write(s, "treepreviewsizepercent", &LibraryBrowser.treePreviewSizePercent); klf_config_write(s, "listpreviewsizepercent", &LibraryBrowser.listPreviewSizePercent); klf_config_write(s, "iconpreviewsizepercent", &LibraryBrowser.iconPreviewSizePercent); s.endGroup(); // Special treatment for Plugins.pluginConfig int k; for (k = 0; k < klf_plugins.size(); ++k) { QString fn = homeConfigDirPluginData+"/"+klf_plugins[k].name+"/"+klf_plugins[k].name+".conf"; QSettings psettings(fn, QSettings::IniFormat); QVariantMap pconfmap = Plugins.pluginConfig[klf_plugins[k].name]; QVariantMap::const_iterator it; for (it = pconfmap.begin(); it != pconfmap.end(); ++it) { psettings.setValue(it.key(), it.value()); } psettings.sync(); } s.sync(); return 0; } KLFPluginConfigAccess KLFConfig::getPluginConfigAccess(const QString& name) { KLF_DEBUG_BLOCK(KLF_FUNC_NAME) ; klfDbg("... for plugin: "<homeConfigDir: "<<_config->homeConfigDir) ; } } KLFPluginConfigAccess::~KLFPluginConfigAccess() { } KLFPluginConfigAccess::KLFPluginConfigAccess(KLFConfig *configObject, const QString& pluginName) { _config = configObject; _pluginname = pluginName; klfDbg("_config="<<_config<<", _pluginname="<<_pluginname) ; if (_config != NULL) { klfDbg("_config->homeConfigDir: "<<_config->homeConfigDir) ; } } QString KLFPluginConfigAccess::homeConfigDir() const { if ( _config == NULL ) { qWarning("KLFPluginConfigAccess::homeConfigDir: Invalid Config Pointer!\n"); return QString(); } klfDbg("_config->homeConfigDir="<<_config->homeConfigDir) ; return _config->homeConfigDir; } QString KLFPluginConfigAccess::globalShareDir() const { if ( _config == NULL ) { qWarning("KLFPluginConfigAccess::homeConfigDir: Invalid Config Pointer!\n"); return QString(); } return _config->globalShareDir; } QString KLFPluginConfigAccess::tempDir() const { if ( _config == NULL ) { qWarning("KLFPluginConfigAccess::tempDir: Invalid Config Pointer!\n"); return QString(); } return _config->BackendSettings.tempDir; } QString KLFPluginConfigAccess::homeConfigPluginDataDir(bool createIfNeeded) const { if ( _config == NULL ) { qWarning("KLFPluginConfigAccess::homeConfigPluginDataDir: Invalid Config Pointer!\n"); return QString(); } klfDbg("_config->homeConfigDirPluginData is "<<_config->homeConfigDirPluginData) ; QString d = _config->homeConfigDirPluginData + "/" + _pluginname; if ( createIfNeeded && ! klfEnsureDir(d) ) { qWarning("KLFPluginConfigAccess::homeConfigPluginDataDir: Can't create directory: `%s'", qPrintable(d)); return QString(); } return d; } QVariant KLFPluginConfigAccess::readValue(const QString& key) const { if ( _config == NULL ) { qWarning("KLFPluginConfigAccess::readValue: Invalid Config Pointer!\n"); return QVariant(); } if ( ! _config->Plugins.pluginConfig[_pluginname].contains(key) ) return QVariant(); return _config->Plugins.pluginConfig[_pluginname][key]; } QVariant KLFPluginConfigAccess::makeDefaultValue(const QString& key, const QVariant& defaultValue) { if ( _config == NULL ) { qWarning("KLFPluginConfigAccess::makeDefaultValue: Invalid Config Pointer!\n"); return QVariant(); } if (_config->Plugins.pluginConfig[_pluginname].contains(key)) return _config->Plugins.pluginConfig[_pluginname][key]; // assign the value into the plugin config, and return it return ( _config->Plugins.pluginConfig[_pluginname][key] = defaultValue ); } void KLFPluginConfigAccess::writeValue(const QString& key, const QVariant& value) { if ( _config == NULL ) { qWarning("KLFPluginConfigAccess::writeValue: Invalid Config Pointer!\n"); return; } _config->Plugins.pluginConfig[_pluginname][key] = value; } // ---------------------- // KEPT FOR COMPATIBILITY WITH OLDER VERSIONS int KLFConfig::readFromConfig_v1() { QSettings s(homeConfigSettingsFileIni, QSettings::IniFormat); s.beginGroup("UI"); UI.locale = s.value("locale", UI.locale).toString(); // ingnore KLF 3.1 app font setting, we have our nice CMU Sans Serif font ;-) // UI.applicationFont = s.value("applicationfont", UI.applicationFont).value(); UI.latexEditFont = s.value("latexeditfont", UI.latexEditFont).value(); UI.preambleEditFont = s.value("preambleeditfont", UI.preambleEditFont).value(); UI.previewTooltipMaxSize = s.value("previewtooltipmaxsize", UI.previewTooltipMaxSize).toSize(); UI.labelOutputFixedSize = s.value("lbloutputfixedsize", UI.labelOutputFixedSize ).toSize(); UI.lastSaveDir = s.value("lastsavedir", UI.lastSaveDir).toString(); UI.symbolsPerLine = s.value("symbolsperline", UI.symbolsPerLine).toInt(); UI.userColorList = settings_read_list(s, "usercolorlist", UI.userColorList); UI.colorChooseWidgetRecent = settings_read_list(s, "colorchoosewidgetrecent", UI.colorChooseWidgetRecent); UI.colorChooseWidgetCustom = settings_read_list(s, "colorchoosewidgetcustom", UI.colorChooseWidgetCustom); UI.maxUserColors = s.value("maxusercolors", UI.maxUserColors).toInt(); UI.enableToolTipPreview = s.value("enabletooltippreview", UI.enableToolTipPreview).toBool(); UI.enableRealTimePreview = s.value("enablerealtimepreview", UI.enableRealTimePreview).toBool(); UI.autosaveLibraryMin = s.value("autosavelibrarymin", UI.autosaveLibraryMin).toInt(); s.endGroup(); s.beginGroup("SyntaxHighlighter"); SyntaxHighlighter.configFlags = s.value("configflags", SyntaxHighlighter.configFlags).toUInt(); SyntaxHighlighter.fmtKeyword = settings_read_QTextCharFormat(s, "keyword", SyntaxHighlighter.fmtKeyword); SyntaxHighlighter.fmtComment = settings_read_QTextCharFormat(s, "comment", SyntaxHighlighter.fmtComment); SyntaxHighlighter.fmtParenMatch = settings_read_QTextCharFormat(s, "parenmatch", SyntaxHighlighter.fmtParenMatch); SyntaxHighlighter.fmtParenMismatch = settings_read_QTextCharFormat(s, "parenmismatch", SyntaxHighlighter.fmtParenMismatch); SyntaxHighlighter.fmtLonelyParen = settings_read_QTextCharFormat(s, "lonelyparen", SyntaxHighlighter.fmtLonelyParen); s.endGroup(); s.beginGroup("BackendSettings"); BackendSettings.tempDir = s.value("tempdir", BackendSettings.tempDir).toString(); BackendSettings.execLatex = s.value("latexexec", BackendSettings.execLatex).toString(); BackendSettings.execDvips = s.value("dvipsexec", BackendSettings.execDvips).toString(); BackendSettings.execGs = s.value("gsexec", BackendSettings.execGs).toString(); BackendSettings.execEpstopdf = s.value("epstopdfexec", BackendSettings.execEpstopdf).toString(); BackendSettings.lborderoffset = s.value("lborderoffset", BackendSettings.lborderoffset).toInt(); BackendSettings.tborderoffset = s.value("tborderoffset", BackendSettings.tborderoffset).toInt(); BackendSettings.rborderoffset = s.value("rborderoffset", BackendSettings.rborderoffset).toInt(); BackendSettings.bborderoffset = s.value("bborderoffset", BackendSettings.bborderoffset).toInt(); s.endGroup(); s.beginGroup("LibraryBrowser"); LibraryBrowser.colorFound = s.value("colorfound", LibraryBrowser.colorFound).value(); LibraryBrowser.colorNotFound = s.value("colornotfound", LibraryBrowser.colorNotFound).value(); s.endGroup(); // Special treatment for Plugins.pluginConfig s.beginGroup("Plugins/Config"); QStringList pluginList = s.childGroups(); s.endGroup(); int j; for (j = 0; j < pluginList.size(); ++j) { QString name = pluginList[j]; s.beginGroup( QString("Plugins/Config/%1").arg(name) ); QMap thispluginconfig; QStringList plconfkeys = s.childKeys(); int k; for (k = 0; k < plconfkeys.size(); ++k) { thispluginconfig[plconfkeys[k]] = s.value(plconfkeys[k]); } klfconfig.Plugins.pluginConfig[name] = thispluginconfig; s.endGroup(); } return 0; } klatexformula-3.2.8/src/klfconfig.h000644 002161 000024 00000023664 12244200461 020257 0ustar00philippestaff000000 000000 /*************************************************************************** * file klfconfig.h * This file is part of the KLatexFormula Project. * Copyright (C) 2011 by Philippe Faist * philippe.faist at bluewin.ch * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ /* $Id: klfconfig.h 603 2011-02-26 23:14:55Z phfaist $ */ #ifndef KLFCONFIG_H #define KLFCONFIG_H #include #include #include #include #include #include #include #include #include class KLFConfig; /** \brief Utility class for plugins to access their configuration space in KLFConfig * * KLatexFormula stores its configuration via KLFConfig and the global \c klfconfig object. * That structure relies on the config structure being known in advance and the named * fields to appear publicly in the KLFConfig class. This scheme is obviously NOT possible * for plugins, so a different approach is taken. * * Plugins are given a pointer to a \c KLFPluginConfigAccess object, which is an interface * to access a special part of KLFConfig that stores plugin-related configuration in the * form of QVariantMaps. (themselves written in an INI-based config file inside the plugin's * local directory, at ~/.klatexformula/plugindata/<plugin>/<plugin>.conf) * * KLFConfig transparently takes care of reading the config for plugins at the beginning * when launching KLatexFormula and storing the plugin configurations in their respective * locations when quitting. * * Plugins can read values they have set in earlier sessions with readValue(). Default values * can be defined with \ref makeDefaultValue(). * * Plugins can write changed settings with \ref writeValue(). */ class KLF_EXPORT KLFPluginConfigAccess { KLFConfig *_config; QString _pluginname; public: KLFPluginConfigAccess(); KLFPluginConfigAccess(KLFConfig *configObject, const QString& pluginName); KLFPluginConfigAccess(const KLFPluginConfigAccess& other); virtual ~KLFPluginConfigAccess(); /** Returns the root directory in which KLatexFormula stores its stuff, usually * ~/.klatexformula. */ virtual QString homeConfigDir() const; /** Returns the directory (not necessarily existing) in which installed data that is * shared among different users is stored. * eg. system-wide installations of plugins/extensions can be placed in: * share-dir/rccresources/*.rcc. */ virtual QString globalShareDir() const; /** Returns a directory in which we can read/write temporary files, eg. "/tmp". * * This is actually the value of klfconfig.BackendSettings.tempDir */ virtual QString tempDir() const; /** Returns a path to a directory in which plugins can manage their data as they want. * * If the \c createIfNeeded argument is TRUE, then the directory is garanteed to exist, * and an empty string is returned if, for whatever reason, the directory can't be * created. * * If the \c createIfNeeded argument is FALSE, then the directory path is returned * regardless of whether the directory exists or not. * * Note that a file named pluginName.conf is created to store the plugin's * settings in that directory (the settings are stored automatically). */ virtual QString homeConfigPluginDataDir(bool createIfNeeded = true) const; /** \brief read a value in the config * * Returns the value of the entry with key \c key. If no such entry exists, * it is not created and an invalid QVariant() is returned. */ virtual QVariant readValue(const QString& key) const; /** \brief write the value if inexistant in config * * equivalent to * \code * if (readValue(key).isNull()) * writeValue(key, defaultValue); * \endcode * * \return the value this key has after this function call, ie. \c defaultValue if no * existing value was found, or the existing value if one already exists. A null QVariant * is returned upon error. */ virtual QVariant makeDefaultValue(const QString& key, const QVariant& defaultValue); /** \brief write a value to settings * * Saves the value of a setting, referenced by \c key, to the given \c value. * * If \c key hasn't been previously set, creates an entry for \c key with the * given \c value. */ virtual void writeValue(const QString& key, const QVariant& value); }; //! Structure that stores klatexformula's configuration in memory /** * This structure is more of a namespace than a class. Access it through the global * object \ref klfconfig. * * See also \ref KLFSettings for a graphical interface for editing these settings. */ class KLF_EXPORT KLFConfig { public: /** this doesn't do anything. It actually leaves every entry with undefined values. This is why it's important to call loadDefaults() quickly after building an instance of KLFConfig. readFromConfig() isn't enough, beacause it assumes the default values are already stored in the current fields. */ KLFConfig(); QString homeConfigDir; QString globalShareDir; QString homeConfigSettingsFile; //!< current (now, "new" klatexformula.conf) settings file QString homeConfigSettingsFileIni; //!< OLD config file QString homeConfigDirRCCResources; QString homeConfigDirPlugins; QString homeConfigDirPluginData; QString homeConfigDirI18n; struct { bool thisVersionMajFirstRun; bool thisVersionMajMinFirstRun; bool thisVersionMajMinRelFirstRun; bool thisVersionExactFirstRun; /** The library file name, relative to homeConfigDir. */ QString libraryFileName; /** The lib scheme to use to store the library. This scheme will be given the full path * to the library in the URL path part. */ QString libraryLibScheme; } Core; struct { QString locale; //!< When setting this, don't forget to call QLocale::setDefault(). bool useSystemAppFont; QFont applicationFont; QFont latexEditFont; QFont preambleEditFont; QSize previewTooltipMaxSize; QSize labelOutputFixedSize; QString lastSaveDir; int symbolsPerLine; QList userColorList; QList colorChooseWidgetRecent; QList colorChooseWidgetCustom; int maxUserColors; bool enableToolTipPreview; bool enableRealTimePreview; int autosaveLibraryMin; bool showHintPopups; bool clearLatexOnly; QString copyExportProfile; QString dragExportProfile; bool glowEffect; QColor glowEffectColor; int glowEffectRadius; QStringList customMathModes; bool showExportProfilesLabel; bool menuExportProfileAffectsDrag; bool menuExportProfileAffectsCopy; } UI; struct { unsigned int configFlags; QTextCharFormat fmtKeyword; QTextCharFormat fmtComment; QTextCharFormat fmtParenMatch; QTextCharFormat fmtParenMismatch; QTextCharFormat fmtLonelyParen; } SyntaxHighlighter; struct { QString tempDir; QString execLatex; QString execDvips; QString execGs; QString execEpstopdf; QStringList execenv; double lborderoffset; double tborderoffset; double rborderoffset; double bborderoffset; bool outlineFonts; } BackendSettings; struct { QColor colorFound; QColor colorNotFound; bool restoreURLs; bool confirmClose; bool groupSubCategories; int iconViewFlow; bool historyTagCopyToArchive; QString lastFileDialogPath; int treePreviewSizePercent; int listPreviewSizePercent; int iconPreviewSizePercent; } LibraryBrowser; struct { QMap > pluginConfig; } Plugins; /** Not a saved setting. This is set in loadDefaults() */ QFont defaultCMUFont; /** Not a saved setting. This is set in loadDefaults() */ QFont defaultStdFont; /** Not a saved setting. This is set in loadDefaults() */ QFont defaultTTFont; KLFPluginConfigAccess getPluginConfigAccess(const QString& name); /** call loadDefaults() before anything, at the beginning, to ensure that the values * in this structure are not undefined. (the constructor doesn't set any values). * * loadDefaults() will set reasonable default values for most settings, but will not * start detecting system settings, specifically look for system executables, possibly other * long detection tasks. To perform that, call detectMissingSettings(). * * In practice, main() calls, in order, loadDefaults(), readFromConfig(), and * detectMissingSettings(). * */ void loadDefaults(); int readFromConfig(); void detectMissingSettings(); int ensureHomeConfigDir(); int writeToConfig(); /** returns TRUE if the executable paths are valid. */ bool checkExePaths(); private: int readFromConfig_v2(const QString& fname); int readFromConfig_v1(); }; KLF_EXPORT extern KLFConfig klfconfig; #endif klatexformula-3.2.8/src/klfdbus.cpp000644 002161 000024 00000013767 12244200461 020305 0ustar00philippestaff000000 000000 /*************************************************************************** * file klfdbus.cpp * This file is part of the KLatexFormula Project. * Copyright (C) 2011 by Philippe Faist * philippe.faist at bluewin.ch * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ /* $Id: klfdbus.cpp 603 2011-02-26 23:14:55Z phfaist $ */ #include "klfmainwin.h" #include "klfdbus.h" KLFDBusAppAdaptor::KLFDBusAppAdaptor(QApplication *application, KLFMainWin *mainWin) : QDBusAbstractAdaptor(application), app(application), _mainwin(mainWin) { } KLFDBusAppAdaptor::~KLFDBusAppAdaptor() { } void KLFDBusAppAdaptor::raiseWindow() { if ( ! _mainwin->isVisible() ) _mainwin->show(); _mainwin->setWindowState(_mainwin->windowState() & ~Qt::WindowMinimized); _mainwin->raise(); _mainwin->activateWindow(); } Q_NOREPLY void KLFDBusAppAdaptor::quit() { app->quit(); } void KLFDBusAppAdaptor::setInputData(const QString& key, const QString& svalue, int ivalue) { if (key == "latex") { _mainwin->slotSetLatex(svalue); } else if (key == "fgcolor") { _mainwin->slotSetFgColor(svalue); } else if (key == "bgcolor") { _mainwin->slotSetBgColor(svalue); } else if (key == "mathmode") { _mainwin->slotSetMathMode(svalue); } else if (key == "preamble") { _mainwin->slotSetPreamble(svalue); } else if (key == "dpi") { _mainwin->slotSetDPI(ivalue); } } void KLFDBusAppAdaptor::setAlterSetting_i(int setting, int value) { _mainwin->alterSetting((KLFMainWin::altersetting_which)setting, value); } void KLFDBusAppAdaptor::setAlterSetting_s(int setting, const QString& value) { _mainwin->alterSetting((KLFMainWin::altersetting_which)setting, value); } void KLFDBusAppAdaptor::evaluateAndSave(const QString& output, const QString& fmt) { _mainwin->slotEvaluateAndSave(output, fmt); } void KLFDBusAppAdaptor::openFile(const QString& fileName) { klfDbg("opening file: "<openFile(fileName); } void KLFDBusAppAdaptor::openFiles(const QStringList& fileNameList) { klfDbg("opening files: "<openFiles(fileNameList); } void KLFDBusAppAdaptor::openData(const QByteArray& data) { klfDbg("opening data: length="<openLibFiles(files); } KLFDBusAppInterface::KLFDBusAppInterface(const QString &service, const QString &path, const QDBusConnection &connection, QObject *parent) : QDBusAbstractInterface(service, path, staticInterfaceName(), connection, parent) { } KLFDBusAppInterface::~KLFDBusAppInterface() { } QDBusReply KLFDBusAppInterface::quit() { QList argumentList; return callWithArgumentList(QDBus::Block, QString("quit"), argumentList); } QDBusReply KLFDBusAppInterface::raiseWindow() { QList argumentList; return callWithArgumentList(QDBus::Block, QString("raiseWindow"), argumentList); } QDBusReply KLFDBusAppInterface::setInputData(const QString& key, const QString& svalue, int ivalue) { QList argumentList; argumentList << QVariant(key) << QVariant(svalue) << QVariant(ivalue); return callWithArgumentList(QDBus::Block, QString("setInputData"), argumentList); } QDBusReply KLFDBusAppInterface::setAlterSetting_i(int setting, int value) { QList argumentList; argumentList << QVariant(setting) << QVariant(value); return callWithArgumentList(QDBus::Block, QString("setAlterSetting_i"), argumentList); } QDBusReply KLFDBusAppInterface::setAlterSetting_s(int setting, const QString& value) { QList argumentList; argumentList << QVariant(setting) << QVariant(value); return callWithArgumentList(QDBus::Block, QString("setAlterSetting_s"), argumentList); } QDBusReply KLFDBusAppInterface::evaluateAndSave(const QString& output, const QString& fmt) { return callWithArgumentList( QDBus::Block, QString("evaluateAndSave"), QList() << QVariant(output) << QVariant(fmt) ); } QDBusReply KLFDBusAppInterface::openFile(const QString& fileName) { return callWithArgumentList( QDBus::Block, QString("openFile"), QList() << QVariant(fileName) ); } QDBusReply KLFDBusAppInterface::openFiles(const QStringList& fileNameList) { return callWithArgumentList( QDBus::Block, QString("openFiles"), QList() << QVariant(fileNameList) ); } QDBusReply KLFDBusAppInterface::openData(const QByteArray& data) { return callWithArgumentList( QDBus::Block, QString("openData"), QList() << QVariant(data) ); } QDBusReply KLFDBusAppInterface::importCmdlKLFFiles(const QStringList& fnames) { QList argumentList; argumentList << QVariant(fnames); return callWithArgumentList(QDBus::Block, QString("importCmdlKLFFiles"), argumentList); } klatexformula-3.2.8/src/klfdbus.h000644 002161 000024 00000007020 12244200461 017733 0ustar00philippestaff000000 000000 /*************************************************************************** * file klfdbus.h * This file is part of the KLatexFormula Project. * Copyright (C) 2011 by Philippe Faist * philippe.faist at bluewin.ch * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ /* $Id: klfdbus.h 603 2011-02-26 23:14:55Z phfaist $ */ #ifndef KLFDBUS_H #define KLFDBUS_H #if defined(KLF_USE_DBUS) #include #include #include #include #include #include class KLFMainWin; class KLF_EXPORT KLFDBusAppAdaptor : public QDBusAbstractAdaptor { Q_OBJECT Q_CLASSINFO("D-Bus Interface", "org.klatexformula.KLatexFormula") private: QApplication *app; KLFMainWin *_mainwin; public: KLFDBusAppAdaptor(QApplication *application, KLFMainWin *mainWin); virtual ~KLFDBusAppAdaptor(); public slots: Q_NOREPLY void quit(); void raiseWindow(); void setInputData(const QString& key, const QString& svalue, int ivalue); void setAlterSetting_i(int setting, int value); void setAlterSetting_s(int setting, const QString& value); void evaluateAndSave(const QString& output, const QString& fmt); void openFile(const QString& fileName); void openFiles(const QStringList& fileNameList); void openData(const QByteArray& data); void importCmdlKLFFiles(const QStringList& fnames); }; class KLF_EXPORT KLFDBusAppInterface: public QDBusAbstractInterface { Q_OBJECT public: static inline const char *staticInterfaceName() { return "org.klatexformula.KLatexFormula"; } public: KLFDBusAppInterface(const QString &service, const QString &path, const QDBusConnection &connection, QObject *parent = 0); ~KLFDBusAppInterface(); public slots: // METHODS QDBusReply quit(); QDBusReply raiseWindow(); QDBusReply setInputData(const QString& key, const QString& svalue, int ivalue = -1); QDBusReply setAlterSetting_i(int setting, int value); QDBusReply setAlterSetting_s(int setting, const QString& value); QDBusReply evaluateAndSave(const QString& output, const QString& fmt); QDBusReply openFile(const QString& fileName); QDBusReply openFiles(const QStringList& fileNameList); QDBusReply openData(const QByteArray& data); QDBusReply importCmdlKLFFiles(const QStringList& fnames); }; #endif #endif klatexformula-3.2.8/src/klfkateplugin/000755 002161 000024 00000000000 12244200454 020773 5ustar00philippestaff000000 000000 klatexformula-3.2.8/src/klflatexedit.cpp000644 002161 000024 00000033122 12244200461 021316 0ustar00philippestaff000000 000000 /*************************************************************************** * file klflatexedit.cpp * This file is part of the KLatexFormula Project. * Copyright (C) 2011 by Philippe Faist * philippe.faist at bluewin.ch * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ /* $Id: klflatexedit.cpp 603 2011-02-26 23:14:55Z phfaist $ */ #include #include #include #include #include #include #include "klfconfig.h" #include "klfmainwin.h" #include "klflatexedit.h" KLFLatexEdit::KLFLatexEdit(QWidget *parent) : QTextEdit(parent), mMainWin(NULL), pHeightHintLines(-1) { mSyntaxHighlighter = new KLFLatexSyntaxHighlighter(this, this); connect(this, SIGNAL(cursorPositionChanged()), mSyntaxHighlighter, SLOT(refreshAll())); setContextMenuPolicy(Qt::DefaultContextMenu); } KLFLatexEdit::~KLFLatexEdit() { } void KLFLatexEdit::clearLatex() { setLatex(""); setFocus(); mSyntaxHighlighter->resetEditing(); } void KLFLatexEdit::setLatex(const QString& latex) { // don't call setPlainText(); we want to preserve undo history QTextCursor cur = textCursor(); cur.beginEditBlock(); cur.select(QTextCursor::Document); cur.removeSelectedText(); cur.insertText(latex); cur.endEditBlock(); } QSize KLFLatexEdit::sizeHint() const { QSize superSizeHint = QTextEdit::sizeHint(); if (pHeightHintLines >= 0) { return QSize(superSizeHint.width(), 4 + QFontMetrics(font()).height()*pHeightHintLines); } return superSizeHint; } void KLFLatexEdit::setHeightHintLines(int lines) { pHeightHintLines = lines; updateGeometry(); } void KLFLatexEdit::contextMenuEvent(QContextMenuEvent *event) { QPoint pos = event->pos(); if ( ! textCursor().hasSelection() ) { // move cursor at that point, but not if we have a selection setTextCursor(cursorForPosition(pos)); } QMenu * menu = createStandardContextMenu(mapToGlobal(pos)); menu->addSeparator(); /** \todo ....make this more flexible ..... ideally integrate into KLFLatexSymbolCache... with XML description, * "symbols" that would be delimiters would have a "display latex" and an "insert latex" with instructions * in if we need to go back spaces, etc.. */ static const struct { const char * instext; int charsback; const char * iconsymb; } delimList[] = { { "\\frac{}{}", 3, "\\frac{a}{b}" }, { "\\sqrt{}", 1, "\\sqrt{xyz}" }, { "\\sqrt[]{}", 3, "\\sqrt[n]{xyz}" }, { "\\textrm{}", 1, "\\textrm{A}" }, { "\\textit{}", 1, "\\textit{A}" }, { "\\textsl{}", 1, "\\textsl{A}" }, { "\\textbf{}", 1, "\\textbf{A}" }, { "\\mathrm{}", 1, "\\mathrm{A}" }, { "\\mathit{}", 1, "\\mathit{A}" }, { NULL, 0, NULL } }; QMenu *delimmenu = new QMenu(menu); int k; for (k = 0; delimList[k].instext != NULL; ++k) { QAction *a = new QAction(delimmenu); a->setText(delimList[k].instext); QVariantMap v; v["delim"] = QVariant::fromValue(QLatin1String(delimList[k].instext)); v["charsBack"] = QVariant::fromValue(delimList[k].charsback); a->setData(QVariant(v)); a->setIcon(KLFLatexSymbolsCache::theCache()->findSymbolPixmap(QLatin1String(delimList[k].iconsymb))); delimmenu->addAction(a); connect(a, SIGNAL(triggered()), this, SLOT(slotInsertFromActionSender())); } QAction *delimaction = menu->addAction(tr("Insert Delimiter")); delimaction->setMenu(delimmenu); QList actionList; emit insertContextMenuActions(pos, &actionList); if (actionList.size()) { menu->addSeparator(); for (k = 0; k < actionList.size(); ++k) { menu->addAction(actionList[k]); } } menu->popup(mapToGlobal(pos)); event->accept(); } bool KLFLatexEdit::canInsertFromMimeData(const QMimeData *data) const { klfDbg("formats: "<formats()); if (mMainWin != NULL) if (mMainWin->canOpenData(data)) return true; // data can be opened by main window // or check if we can insert the data ourselves return QTextEdit::canInsertFromMimeData(data); } void KLFLatexEdit::insertFromMimeData(const QMimeData *data) { bool openerfound = false; klfDbg("formats: "<formats()); if (mMainWin != NULL) if (mMainWin->openData(data, &openerfound)) return; // data was opened by main window if (openerfound) { // failed to open data, don't insist. return; } klfDbg("mMainWin="<inherits("QAction")) { qWarning()<(obj)->data(); QVariantMap vdata = v.toMap(); insertDelimiter(vdata["delim"].toString(), vdata["charsBack"].toInt()); } // ------------------------------------ KLFLatexSyntaxHighlighter::KLFLatexSyntaxHighlighter(QTextEdit *textedit, QObject *parent) : QSyntaxHighlighter(parent) , _textedit(textedit) { setDocument(textedit->document()); _caretpos = 0; } KLFLatexSyntaxHighlighter::~KLFLatexSyntaxHighlighter() { } void KLFLatexSyntaxHighlighter::setCaretPos(int position) { _caretpos = position; } void KLFLatexSyntaxHighlighter::refreshAll() { rehighlight(); } void KLFLatexSyntaxHighlighter::parseEverything() { QString text; int i = 0; int blockpos; QList blocklens; // the length of each block std::stack parens; // the parens that we'll meet QTextBlock block = document()->firstBlock(); _rulestoapply.clear(); int k; while (block.isValid()) { text = block.text(); i = 0; blockpos = block.position(); blocklens.append(block.length()); while (text.length() < block.length()) { text += "\n"; } static QRegExp bsleft("^\\\\left(?!\\w)"); static QRegExp bsright("^\\\\right(?!\\w)"); i = 0; while ( i < text.length() ) { if (text[i] == '%') { k = 0; while (i+k < text.length() && text[i+k] != '\n') ++k; _rulestoapply.append(FormatRule(blockpos+i, k, FComment)); i += k + 1; continue; } if (bsleft.indexIn(text.mid(i)) != -1 || text[i] == '{' || text[i] == '(' || text[i] == '[') { bool l = (text.mid(i, 5) == "\\left"); if (l) i += 5; if (i == text.length()) // ignore a \left with no following character continue; if (text.mid(i,2) == "\\{") ++i; // focus on the '{' sign, not the \\ sign parens.push(ParenItem(blockpos+i, (_caretpos == blockpos+i), text[i].toAscii(), l)); if (i > 0 && text[i-1] == '\\') { --i; // allow the next-next if-block for keywords to highlight this "\\{" } } if (bsright.indexIn(text.mid(i)) != -1 || text[i] == '}' || text[i] == ')' || text[i] == ']') { ParenItem p; if (!parens.empty()) { p = parens.top(); parens.pop(); } else { p = ParenItem(0, false, '!'); // simulate an item if (klfconfig.SyntaxHighlighter.configFlags & HighlightLonelyParen) _rulestoapply.append(FormatRule(blockpos+i, 1, FLonelyParen)); } Format col = FParenMatch; bool l = ( text.mid(i, 6) == "\\right" ); if (l) i += 6; if (i == text.length()) // ignore a \right with no following character continue; if (text.mid(i,2) == "\\}") ++i; // focus on the '}' sign, not the \\ sign if ( (l && text[i] == '.' && p.left) || (l && p.ch == '.' && p.left) ) { // special case with \left( blablabla \right. or \left. blablabla \right) col = FParenMatch; } else if ((text[i] == '}' && p.ch != '{') || (text[i] == ')' && p.ch != '(') || (text[i] == ']' && p.ch != '[') || (l != p.left) ) { col = FParenMismatch; } // does this rule span multiple paragraphs, and do we need to show it (eg. cursor right after paren) if (p.highlight || (_caretpos == blockpos+i+1)) { if ((klfconfig.SyntaxHighlighter.configFlags & HighlightParensOnly) == 0) { _rulestoapply.append(FormatRule(p.pos, blockpos+i+1-p.pos, col, true)); } else { if (p.ch != '!') // simulated item for first pos _rulestoapply.append(FormatRule(p.pos, 1, col)); _rulestoapply.append(FormatRule(blockpos+i, 1, col, true)); } } if (i > 0 && text[i-1] == '\\') { --i; // allow the next if-block for keywords to highlight this "\\}" } } if (text[i] == '\\') { // a keyword ("\symbol") ++i; k = 0; if (i >= text.length()) continue; while (i+k < text.length() && ( (text[i+k] >= 'a' && text[i+k] <= 'z') || (text[i+k] >= 'A' && text[i+k] <= 'Z') )) ++k; if (k == 0 && i+1 < text.length()) k = 1; _rulestoapply.append(FormatRule(blockpos+i-1, k+1, FKeyWord)); QString symbol = text.mid(i-1,k+1); // from i-1, length k+1 if (symbol.size() > 1) { // no empty backslash klfDbg("symbol="<lastBlock(); while ( ! parens.empty() ) { // for each unclosed paren left ParenItem p = parens.top(); parens.pop(); if (_caretpos == p.pos) { if ( (klfconfig.SyntaxHighlighter.configFlags & HighlightParensOnly) != 0 ) _rulestoapply.append(FormatRule(p.pos, 1, FParenMismatch, true)); else _rulestoapply.append(FormatRule(p.pos, lastblock.position()+lastblock.length()-p.pos, FParenMismatch, true)); } else { // not on caret positions if (klfconfig.SyntaxHighlighter.configFlags & HighlightLonelyParen) _rulestoapply.append(FormatRule(p.pos, 1, FLonelyParen)); } } } QTextCharFormat KLFLatexSyntaxHighlighter::charfmtForFormat(Format f) { QTextCharFormat fmt; switch (f) { case FNormal: fmt = QTextCharFormat(); break; case FKeyWord: fmt = klfconfig.SyntaxHighlighter.fmtKeyword; break; case FComment: fmt = klfconfig.SyntaxHighlighter.fmtComment; break; case FParenMatch: fmt = klfconfig.SyntaxHighlighter.fmtParenMatch; break; case FParenMismatch: fmt = klfconfig.SyntaxHighlighter.fmtParenMismatch; break; case FLonelyParen: fmt = klfconfig.SyntaxHighlighter.fmtLonelyParen; break; default: fmt = QTextCharFormat(); break; }; return fmt; } void KLFLatexSyntaxHighlighter::highlightBlock(const QString& text) { klfDbg("text is "<textCursor().position()); parseEverything(); } QList blockfmtrules; QVector charformats; charformats.resize(text.length()); blockfmtrules.append(FormatRule(0, text.length(), FNormal)); int k, j; for (k = 0; k < _rulestoapply.size(); ++k) { int start = _rulestoapply[k].pos - block.position(); int len = _rulestoapply[k].len; if (start < 0) { len += start; // +, start being negative start = 0; } if (start > text.length()) continue; if (len > text.length() - start) len = text.length() - start; // apply rule blockfmtrules.append(FormatRule(start, len, _rulestoapply[k].format, _rulestoapply[k].onlyIfFocus)); } bool hasfocus = _textedit->hasFocus(); for (k = 0; k < blockfmtrules.size(); ++k) { for (j = blockfmtrules[k].pos; j < blockfmtrules[k].end(); ++j) { if ( ! blockfmtrules[k].onlyIfFocus || hasfocus ) charformats[j].merge(charfmtForFormat(blockfmtrules[k].format)); } } for (j = 0; j < charformats.size(); ++j) { setFormat(j, 1, charformats[j]); } return; } void KLFLatexSyntaxHighlighter::resetEditing() { pTypedSymbols = QStringList(); } klatexformula-3.2.8/src/klflatexedit.h000644 002161 000024 00000013731 12244200461 020767 0ustar00philippestaff000000 000000 /*************************************************************************** * file klflatexedit.h * This file is part of the KLatexFormula Project. * Copyright (C) 2011 by Philippe Faist * philippe.faist at bluewin.ch * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ /* $Id: klflatexedit.h 603 2011-02-26 23:14:55Z phfaist $ */ #ifndef KLFLATEXEDIT_H #define KLFLATEXEDIT_H #include #include #include #include #include #include #include #include class KLFLatexSyntaxHighlighter; class KLFMainWin; // ------------------------------------------------ /** \brief A text edit field that edits latex code. * * Implementation of a QTextEdit to type latex code. */ class KLF_EXPORT KLFLatexEdit : public QTextEdit { Q_OBJECT Q_PROPERTY(int heightHintLines READ heightHintLines WRITE setHeightHintLines) ; public: KLFLatexEdit(QWidget *mainwin); virtual ~KLFLatexEdit(); KLFLatexSyntaxHighlighter *syntaxHighlighter() { return mSyntaxHighlighter; } /** This function may be used to give a pointer to a KLFMainWin that we will call * to open data when we get a paste/drop. If they can open the data, then we consider * the data pasted. Otherwise, rely on the QTextEdit built-in functionality. * * This pointer may also be NULL, in which case we will only rely on QTextEdit built-in * functionality. */ void setMainWinDataOpener(KLFMainWin *mainwin) { mMainWin = mainwin; } /** See sizeHint(). This gets the preferred height of this widget in number of text lines, * as set by setHeightHintLints(). */ inline int heightHintLines() const { return pHeightHintLines; } /** The size hint of the widget. If \c heightHintLines() is set to \c -1, this directly * calles the superclass function. Otherwise this returns the size in pixels this widget * wants to have, given the value of heightHintLines() number of lines in the current font. */ virtual QSize sizeHint() const; signals: /** This signal is emitted just before the context menu is shown. If someone wants * to add entries into the context menu, then connect to this signal, and append * new actions to the \c actionList. */ void insertContextMenuActions(const QPoint& pos, QList *actionList); public slots: /** Sets the current latex code to \c latex. * * \note this function, unlike QTextEdit::setPlainText(), preserves * undo history. */ void setLatex(const QString& latex); void clearLatex(); /** See sizeHint(). This sets the preferred height of this widget in number of text lines. */ void setHeightHintLines(int lines); /** Inserts a delimiter \c delim, and brings the cursor \c charsBack characters * back. Eg. you can insert \c "\mathrm{}" and bring the cursor 1 space back. */ void insertDelimiter(const QString& delim, int charsBack = 1); protected: virtual void contextMenuEvent(QContextMenuEvent *event); virtual bool canInsertFromMimeData(const QMimeData *source) const; virtual void insertFromMimeData(const QMimeData *source); private slots: void slotInsertFromActionSender(); private: KLFLatexSyntaxHighlighter *mSyntaxHighlighter; /** This is used to open data if needed */ KLFMainWin *mMainWin; int pHeightHintLines; }; // ---------------------------------------------- class KLF_EXPORT KLFLatexSyntaxHighlighter : public QSyntaxHighlighter { Q_OBJECT public: KLFLatexSyntaxHighlighter(QTextEdit *textedit, QObject *parent); virtual ~KLFLatexSyntaxHighlighter(); void setCaretPos(int position); virtual void highlightBlock(const QString& text); enum { Enabled = 0x01, HighlightParensOnly = 0x02, HighlightLonelyParen = 0x04 }; signals: void newSymbolTyped(const QString& symbolName); public slots: void refreshAll(); /** This clears for example the list of already typed symbols. */ void resetEditing(); private: QTextEdit *_textedit; int _caretpos; enum Format { FNormal = 0, FKeyWord, FComment, FParenMatch, FParenMismatch, FLonelyParen }; struct FormatRule { FormatRule(int ps = -1, int l = 0, Format f = FNormal, bool needsfocus = false) : pos(ps), len(l), format(f), onlyIfFocus(needsfocus) { } int pos; int len; int end() const { return pos + len; } Format format; bool onlyIfFocus; }; struct ParenItem { ParenItem(int ps = -1, bool h = false, char c = 0, bool l = false) : pos(ps), highlight(h), ch(c), left(l) { } int pos; bool highlight; char ch; bool left; //!< if it's \left( instead of ( }; QList _rulestoapply; void parseEverything(); QTextCharFormat charfmtForFormat(Format f); /** symbols that have already been typed and that newSymbolTyped() should not * be emitted for any more. */ QStringList pTypedSymbols; }; #endif klatexformula-3.2.8/src/klflatexsymbols.cpp000644 002161 000024 00000070351 12244200461 022066 0ustar00philippestaff000000 000000 /*************************************************************************** * file klflatexsymbols.cpp * This file is part of the KLatexFormula Project. * Copyright (C) 2011 by Philippe Faist * philippe.faist@bluewin.ch * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ /* $Id: klflatexsymbols.cpp 603 2011-02-26 23:14:55Z phfaist $ */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "klfmain.h" #include "klfconfig.h" #include "klflatexsymbols.h" // ------------------ KLFLatexSymbol::KLFLatexSymbol(const QDomElement& e) : symbol(), preamble(), textmode(false), bbexpand(), hidden(false) { // preamble QDomNodeList usepackagelist = e.elementsByTagName("usepackage"); int k; for (k = 0; k < usepackagelist.size(); ++k) { QString package = usepackagelist.at(k).toElement().attribute("name"); if (package[0] == '[' || package[0] == '{') preamble.append(QString::fromAscii("\\usepackage%1").arg(package)); else preamble.append(QString::fromAscii("\\usepackage{%1}").arg(package)); } QDomNodeList preamblelinelist = e.elementsByTagName("preambleline"); for (k = 0; k < preamblelinelist.size(); ++k) { preamble.append(preamblelinelist.at(k).toElement().text()); } // textmode if (e.attribute("textmode") == "true") textmode = true; else textmode = false; if (e.elementsByTagName("hidden").size() > 0) hidden = true; // bb offset QDomNodeList bblist = e.elementsByTagName("bb"); if (bblist.size() > 1) { fprintf(stderr, "WARNING: Expected at most single item!\n"); } if (bblist.size()) { sscanf(bblist.at(0).toElement().attribute("expand").toLatin1().constData(), "%d,%d,%d,%d", &bbexpand.t, &bbexpand.r, &bbexpand.b, &bbexpand.l); } // latex code QDomNodeList latexlist = e.elementsByTagName("latex"); if (latexlist.size() != 1) { fprintf(stderr, "WARNING: Expected single ... in symbol entry!\n"); } if (latexlist.size() == 0) return; symbol = latexlist.at(0).toElement().text(); klfDbg("read symbol "<