lcmaps-plugins-jobrep-1.5.7/ 0000755 0001750 0000144 00000000000 14574774166 012763 5 0000000 0000000 lcmaps-plugins-jobrep-1.5.7/project/ 0000755 0001750 0000144 00000000000 14574774166 014431 5 0000000 0000000 lcmaps-plugins-jobrep-1.5.7/project/libtool.m4 0000644 0001750 0000144 00001127764 14574774130 016270 0000000 0000000 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
#
# Copyright (C) 1996-2001, 2003-2019, 2021-2022 Free Software
# Foundation, Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
m4_define([_LT_COPYING], [dnl
# Copyright (C) 2014 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# GNU Libtool is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of of the License, or
# (at your option) any later version.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program or library that is built
# using GNU Libtool, you may include this file under the same
# distribution terms that you use for the rest of that program.
#
# GNU Libtool is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
])
# serial 59 LT_INIT
# LT_PREREQ(VERSION)
# ------------------
# Complain and exit if this libtool version is less that VERSION.
m4_defun([LT_PREREQ],
[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
[m4_default([$3],
[m4_fatal([Libtool version $1 or higher is required],
63)])],
[$2])])
# _LT_CHECK_BUILDDIR
# ------------------
# Complain if the absolute build directory name contains unusual characters
m4_defun([_LT_CHECK_BUILDDIR],
[case `pwd` in
*\ * | *\ *)
AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
esac
])
# LT_INIT([OPTIONS])
# ------------------
AC_DEFUN([LT_INIT],
[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK
AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
AC_BEFORE([$0], [LT_LANG])dnl
AC_BEFORE([$0], [LT_OUTPUT])dnl
AC_BEFORE([$0], [LTDL_INIT])dnl
m4_require([_LT_CHECK_BUILDDIR])dnl
dnl Autoconf doesn't catch unexpanded LT_ macros by default:
m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
dnl unless we require an AC_DEFUNed macro:
AC_REQUIRE([LTOPTIONS_VERSION])dnl
AC_REQUIRE([LTSUGAR_VERSION])dnl
AC_REQUIRE([LTVERSION_VERSION])dnl
AC_REQUIRE([LTOBSOLETE_VERSION])dnl
m4_require([_LT_PROG_LTMAIN])dnl
_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
dnl Parse OPTIONS
_LT_SET_OPTIONS([$0], [$1])
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS=$ltmain
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
_LT_SETUP
# Only expand once:
m4_define([LT_INIT])
])# LT_INIT
# Old names:
AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
# _LT_PREPARE_CC_BASENAME
# -----------------------
m4_defun([_LT_PREPARE_CC_BASENAME], [
# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
func_cc_basename ()
{
for cc_temp in @S|@*""; do
case $cc_temp in
compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
\-*) ;;
*) break;;
esac
done
func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
}
])# _LT_PREPARE_CC_BASENAME
# _LT_CC_BASENAME(CC)
# -------------------
# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME,
# but that macro is also expanded into generated libtool script, which
# arranges for $SED and $ECHO to be set by different means.
m4_defun([_LT_CC_BASENAME],
[m4_require([_LT_PREPARE_CC_BASENAME])dnl
AC_REQUIRE([_LT_DECL_SED])dnl
AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
func_cc_basename $1
cc_basename=$func_cc_basename_result
])
# _LT_FILEUTILS_DEFAULTS
# ----------------------
# It is okay to use these file commands and assume they have been set
# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'.
m4_defun([_LT_FILEUTILS_DEFAULTS],
[: ${CP="cp -f"}
: ${MV="mv -f"}
: ${RM="rm -f"}
])# _LT_FILEUTILS_DEFAULTS
# _LT_SETUP
# ---------
m4_defun([_LT_SETUP],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
dnl
_LT_DECL([], [host_alias], [0], [The host system])dnl
_LT_DECL([], [host], [0])dnl
_LT_DECL([], [host_os], [0])dnl
dnl
_LT_DECL([], [build_alias], [0], [The build system])dnl
_LT_DECL([], [build], [0])dnl
_LT_DECL([], [build_os], [0])dnl
dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([LT_PATH_LD])dnl
AC_REQUIRE([LT_PATH_NM])dnl
dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
test -z "$LN_S" && LN_S="ln -s"
_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
dnl
AC_REQUIRE([LT_CMD_MAX_LEN])dnl
_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_CHECK_SHELL_FEATURES])dnl
m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
m4_require([_LT_CMD_RELOAD])dnl
m4_require([_LT_DECL_FILECMD])dnl
m4_require([_LT_CHECK_MAGIC_METHOD])dnl
m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
m4_require([_LT_CMD_OLD_ARCHIVE])dnl
m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
m4_require([_LT_WITH_SYSROOT])dnl
m4_require([_LT_CMD_TRUNCATE])dnl
_LT_CONFIG_LIBTOOL_INIT([
# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes INIT.
if test -n "\${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
])
if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
_LT_CHECK_OBJDIR
m4_require([_LT_TAG_COMPILER])dnl
case $host_os in
aix3*)
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
;;
esac
# Global variables:
ofile=libtool
can_build_shared=yes
# All known linkers require a '.a' archive for static linking (except MSVC and
# ICC, which need '.lib').
libext=a
with_gnu_ld=$lt_cv_prog_gnu_ld
old_CC=$CC
old_CFLAGS=$CFLAGS
# Set sane defaults for various variables
test -z "$CC" && CC=cc
test -z "$LTCC" && LTCC=$CC
test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
test -z "$LD" && LD=ld
test -z "$ac_objext" && ac_objext=o
_LT_CC_BASENAME([$compiler])
# Only perform the check for file, if the check method requires it
test -z "$MAGIC_CMD" && MAGIC_CMD=file
case $deplibs_check_method in
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
_LT_PATH_MAGIC
fi
;;
esac
# Use C for the default configuration in the libtool script
LT_SUPPORTED_TAG([CC])
_LT_LANG_C_CONFIG
_LT_LANG_DEFAULT_CONFIG
_LT_CONFIG_COMMANDS
])# _LT_SETUP
# _LT_PREPARE_SED_QUOTE_VARS
# --------------------------
# Define a few sed substitution that help us do robust quoting.
m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
[# Backslashify metacharacters that are still active within
# double-quoted strings.
sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
# Same as above, but do not quote variable references.
double_quote_subst='s/\([["`\\]]\)/\\\1/g'
# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
# Sed substitution to delay expansion of an escaped single quote.
delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
# Sed substitution to avoid accidental globbing in evaled expressions
no_glob_subst='s/\*/\\\*/g'
])
# _LT_PROG_LTMAIN
# ---------------
# Note that this code is called both from 'configure', and 'config.status'
# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
# 'config.status' has no value for ac_aux_dir unless we are using Automake,
# so we pass a copy along to make sure it has a sensible value anyway.
m4_defun([_LT_PROG_LTMAIN],
[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
ltmain=$ac_aux_dir/ltmain.sh
])# _LT_PROG_LTMAIN
## ------------------------------------- ##
## Accumulate code for creating libtool. ##
## ------------------------------------- ##
# So that we can recreate a full libtool script including additional
# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
# in macros and then make a single call at the end using the 'libtool'
# label.
# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
# ----------------------------------------
# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
m4_define([_LT_CONFIG_LIBTOOL_INIT],
[m4_ifval([$1],
[m4_append([_LT_OUTPUT_LIBTOOL_INIT],
[$1
])])])
# Initialize.
m4_define([_LT_OUTPUT_LIBTOOL_INIT])
# _LT_CONFIG_LIBTOOL([COMMANDS])
# ------------------------------
# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
m4_define([_LT_CONFIG_LIBTOOL],
[m4_ifval([$1],
[m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
[$1
])])])
# Initialize.
m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
# -----------------------------------------------------
m4_defun([_LT_CONFIG_SAVE_COMMANDS],
[_LT_CONFIG_LIBTOOL([$1])
_LT_CONFIG_LIBTOOL_INIT([$2])
])
# _LT_FORMAT_COMMENT([COMMENT])
# -----------------------------
# Add leading comment marks to the start of each line, and a trailing
# full-stop to the whole comment if one is not present already.
m4_define([_LT_FORMAT_COMMENT],
[m4_ifval([$1], [
m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
[['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
)])
## ------------------------ ##
## FIXME: Eliminate VARNAME ##
## ------------------------ ##
# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
# -------------------------------------------------------------------
# CONFIGNAME is the name given to the value in the libtool script.
# VARNAME is the (base) name used in the configure script.
# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
# VARNAME. Any other value will be used directly.
m4_define([_LT_DECL],
[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
[lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
[m4_ifval([$1], [$1], [$2])])
lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
m4_ifval([$4],
[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
lt_dict_add_subkey([lt_decl_dict], [$2],
[tagged?], [m4_ifval([$5], [yes], [no])])])
])
# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
# --------------------------------------------------------
m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
# ------------------------------------------------
m4_define([lt_decl_tag_varnames],
[_lt_decl_filter([tagged?], [yes], $@)])
# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
# ---------------------------------------------------------
m4_define([_lt_decl_filter],
[m4_case([$#],
[0], [m4_fatal([$0: too few arguments: $#])],
[1], [m4_fatal([$0: too few arguments: $#: $1])],
[2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
[3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
[lt_dict_filter([lt_decl_dict], $@)])[]dnl
])
# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
# --------------------------------------------------
m4_define([lt_decl_quote_varnames],
[_lt_decl_filter([value], [1], $@)])
# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
# ---------------------------------------------------
m4_define([lt_decl_dquote_varnames],
[_lt_decl_filter([value], [2], $@)])
# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
# ---------------------------------------------------
m4_define([lt_decl_varnames_tagged],
[m4_assert([$# <= 2])dnl
_$0(m4_quote(m4_default([$1], [[, ]])),
m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
m4_define([_lt_decl_varnames_tagged],
[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
# ------------------------------------------------
m4_define([lt_decl_all_varnames],
[_$0(m4_quote(m4_default([$1], [[, ]])),
m4_if([$2], [],
m4_quote(lt_decl_varnames),
m4_quote(m4_shift($@))))[]dnl
])
m4_define([_lt_decl_all_varnames],
[lt_join($@, lt_decl_varnames_tagged([$1],
lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
])
# _LT_CONFIG_STATUS_DECLARE([VARNAME])
# ------------------------------------
# Quote a variable value, and forward it to 'config.status' so that its
# declaration there will have the same value as in 'configure'. VARNAME
# must have a single quote delimited value for this to work.
m4_define([_LT_CONFIG_STATUS_DECLARE],
[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
# _LT_CONFIG_STATUS_DECLARATIONS
# ------------------------------
# We delimit libtool config variables with single quotes, so when
# we write them to config.status, we have to be sure to quote all
# embedded single quotes properly. In configure, this macro expands
# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
#
# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`'
m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
[m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
# _LT_LIBTOOL_TAGS
# ----------------
# Output comment and list of tags supported by the script
m4_defun([_LT_LIBTOOL_TAGS],
[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
available_tags='_LT_TAGS'dnl
])
# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
# -----------------------------------
# Extract the dictionary values for VARNAME (optionally with TAG) and
# expand to a commented shell variable setting:
#
# # Some comment about what VAR is for.
# visible_name=$lt_internal_name
m4_define([_LT_LIBTOOL_DECLARE],
[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
[description])))[]dnl
m4_pushdef([_libtool_name],
m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
[0], [_libtool_name=[$]$1],
[1], [_libtool_name=$lt_[]$1],
[2], [_libtool_name=$lt_[]$1],
[_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
])
# _LT_LIBTOOL_CONFIG_VARS
# -----------------------
# Produce commented declarations of non-tagged libtool config variables
# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool'
# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
# section) are produced by _LT_LIBTOOL_TAG_VARS.
m4_defun([_LT_LIBTOOL_CONFIG_VARS],
[m4_foreach([_lt_var],
m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
[m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
# _LT_LIBTOOL_TAG_VARS(TAG)
# -------------------------
m4_define([_LT_LIBTOOL_TAG_VARS],
[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
[m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
# _LT_TAGVAR(VARNAME, [TAGNAME])
# ------------------------------
m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
# _LT_CONFIG_COMMANDS
# -------------------
# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
# variables for single and double quote escaping we saved from calls
# to _LT_DECL, we can put quote escaped variables declarations
# into 'config.status', and then the shell code to quote escape them in
# for loops in 'config.status'. Finally, any additional code accumulated
# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
m4_defun([_LT_CONFIG_COMMANDS],
[AC_PROVIDE_IFELSE([LT_OUTPUT],
dnl If the libtool generation code has been placed in $CONFIG_LT,
dnl instead of duplicating it all over again into config.status,
dnl then we will have config.status run $CONFIG_LT later, so it
dnl needs to know what name is stored there:
[AC_CONFIG_COMMANDS([libtool],
[$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
dnl If the libtool generation code is destined for config.status,
dnl expand the accumulated commands and init code now:
[AC_CONFIG_COMMANDS([libtool],
[_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
])#_LT_CONFIG_COMMANDS
# Initialize.
m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
[
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
sed_quote_subst='$sed_quote_subst'
double_quote_subst='$double_quote_subst'
delay_variable_subst='$delay_variable_subst'
_LT_CONFIG_STATUS_DECLARATIONS
LTCC='$LTCC'
LTCFLAGS='$LTCFLAGS'
compiler='$compiler_DEFAULT'
# A function that is used when there is no print builtin or printf.
func_fallback_echo ()
{
eval 'cat <<_LTECHO_EOF
\$[]1
_LTECHO_EOF'
}
# Quote evaled strings.
for var in lt_decl_all_varnames([[ \
]], lt_decl_quote_varnames); do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
;;
esac
done
# Double-quote double-evaled strings.
for var in lt_decl_all_varnames([[ \
]], lt_decl_dquote_varnames); do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
;;
esac
done
_LT_OUTPUT_LIBTOOL_INIT
])
# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
# ------------------------------------
# Generate a child script FILE with all initialization necessary to
# reuse the environment learned by the parent script, and make the
# file executable. If COMMENT is supplied, it is inserted after the
# '#!' sequence but before initialization text begins. After this
# macro, additional text can be appended to FILE to form the body of
# the child script. The macro ends with non-zero status if the
# file could not be fully written (such as if the disk is full).
m4_ifdef([AS_INIT_GENERATED],
[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
[m4_defun([_LT_GENERATED_FILE_INIT],
[m4_require([AS_PREPARE])]dnl
[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
[lt_write_fail=0
cat >$1 <<_ASEOF || lt_write_fail=1
#! $SHELL
# Generated by $as_me.
$2
SHELL=\${CONFIG_SHELL-$SHELL}
export SHELL
_ASEOF
cat >>$1 <<\_ASEOF || lt_write_fail=1
AS_SHELL_SANITIZE
_AS_PREPARE
exec AS_MESSAGE_FD>&1
_ASEOF
test 0 = "$lt_write_fail" && chmod +x $1[]dnl
m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
# LT_OUTPUT
# ---------
# This macro allows early generation of the libtool script (before
# AC_OUTPUT is called), incase it is used in configure for compilation
# tests.
AC_DEFUN([LT_OUTPUT],
[: ${CONFIG_LT=./config.lt}
AC_MSG_NOTICE([creating $CONFIG_LT])
_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
[# Run this file to recreate a libtool stub with the current configuration.])
cat >>"$CONFIG_LT" <<\_LTEOF
lt_cl_silent=false
exec AS_MESSAGE_LOG_FD>>config.log
{
echo
AS_BOX([Running $as_me.])
} >&AS_MESSAGE_LOG_FD
lt_cl_help="\
'$as_me' creates a local libtool stub from the current configuration,
for use in further configure time tests before the real libtool is
generated.
Usage: $[0] [[OPTIONS]]
-h, --help print this help, then exit
-V, --version print version number, then exit
-q, --quiet do not print progress messages
-d, --debug don't remove temporary files
Report bugs to ."
lt_cl_version="\
m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
configured by $[0], generated by m4_PACKAGE_STRING.
Copyright (C) 2011 Free Software Foundation, Inc.
This config.lt script is free software; the Free Software Foundation
gives unlimited permision to copy, distribute and modify it."
while test 0 != $[#]
do
case $[1] in
--version | --v* | -V )
echo "$lt_cl_version"; exit 0 ;;
--help | --h* | -h )
echo "$lt_cl_help"; exit 0 ;;
--debug | --d* | -d )
debug=: ;;
--quiet | --q* | --silent | --s* | -q )
lt_cl_silent=: ;;
-*) AC_MSG_ERROR([unrecognized option: $[1]
Try '$[0] --help' for more information.]) ;;
*) AC_MSG_ERROR([unrecognized argument: $[1]
Try '$[0] --help' for more information.]) ;;
esac
shift
done
if $lt_cl_silent; then
exec AS_MESSAGE_FD>/dev/null
fi
_LTEOF
cat >>"$CONFIG_LT" <<_LTEOF
_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
_LTEOF
cat >>"$CONFIG_LT" <<\_LTEOF
AC_MSG_NOTICE([creating $ofile])
_LT_OUTPUT_LIBTOOL_COMMANDS
AS_EXIT(0)
_LTEOF
chmod +x "$CONFIG_LT"
# configure is writing to config.log, but config.lt does its own redirection,
# appending to config.log, which fails on DOS, as config.log is still kept
# open by configure. Here we exec the FD to /dev/null, effectively closing
# config.log, so it can be properly (re)opened and appended to by config.lt.
lt_cl_success=:
test yes = "$silent" &&
lt_config_lt_args="$lt_config_lt_args --quiet"
exec AS_MESSAGE_LOG_FD>/dev/null
$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
exec AS_MESSAGE_LOG_FD>>config.log
$lt_cl_success || AS_EXIT(1)
])# LT_OUTPUT
# _LT_CONFIG(TAG)
# ---------------
# If TAG is the built-in tag, create an initial libtool script with a
# default configuration from the untagged config vars. Otherwise add code
# to config.status for appending the configuration named by TAG from the
# matching tagged config vars.
m4_defun([_LT_CONFIG],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
_LT_CONFIG_SAVE_COMMANDS([
m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
m4_if(_LT_TAG, [C], [
# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes.
if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
cfgfile=${ofile}T
trap "$RM \"$cfgfile\"; exit 1" 1 2 15
$RM "$cfgfile"
cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
# Generated automatically by $as_me ($PACKAGE) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
# Provide generalized library-building support services.
# Written by Gordon Matzigkeit, 1996
_LT_COPYING
_LT_LIBTOOL_TAGS
# Configured defaults for sys_lib_dlsearch_path munging.
: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
# ### BEGIN LIBTOOL CONFIG
_LT_LIBTOOL_CONFIG_VARS
_LT_LIBTOOL_TAG_VARS
# ### END LIBTOOL CONFIG
_LT_EOF
cat <<'_LT_EOF' >> "$cfgfile"
# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
_LT_PREPARE_MUNGE_PATH_LIST
_LT_PREPARE_CC_BASENAME
# ### END FUNCTIONS SHARED WITH CONFIGURE
_LT_EOF
case $host_os in
aix3*)
cat <<\_LT_EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
_LT_EOF
;;
esac
_LT_PROG_LTMAIN
# We use sed instead of cat because bash on DJGPP gets confused if
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
$SED '$q' "$ltmain" >> "$cfgfile" \
|| (rm -f "$cfgfile"; exit 1)
mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
],
[cat <<_LT_EOF >> "$ofile"
dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
dnl in a comment (ie after a #).
# ### BEGIN LIBTOOL TAG CONFIG: $1
_LT_LIBTOOL_TAG_VARS(_LT_TAG)
# ### END LIBTOOL TAG CONFIG: $1
_LT_EOF
])dnl /m4_if
],
[m4_if([$1], [], [
PACKAGE='$PACKAGE'
VERSION='$VERSION'
RM='$RM'
ofile='$ofile'], [])
])dnl /_LT_CONFIG_SAVE_COMMANDS
])# _LT_CONFIG
# LT_SUPPORTED_TAG(TAG)
# ---------------------
# Trace this macro to discover what tags are supported by the libtool
# --tag option, using:
# autoconf --trace 'LT_SUPPORTED_TAG:$1'
AC_DEFUN([LT_SUPPORTED_TAG], [])
# C support is built-in for now
m4_define([_LT_LANG_C_enabled], [])
m4_define([_LT_TAGS], [])
# LT_LANG(LANG)
# -------------
# Enable libtool support for the given language if not already enabled.
AC_DEFUN([LT_LANG],
[AC_BEFORE([$0], [LT_OUTPUT])dnl
m4_case([$1],
[C], [_LT_LANG(C)],
[C++], [_LT_LANG(CXX)],
[Go], [_LT_LANG(GO)],
[Java], [_LT_LANG(GCJ)],
[Fortran 77], [_LT_LANG(F77)],
[Fortran], [_LT_LANG(FC)],
[Windows Resource], [_LT_LANG(RC)],
[m4_ifdef([_LT_LANG_]$1[_CONFIG],
[_LT_LANG($1)],
[m4_fatal([$0: unsupported language: "$1"])])])dnl
])# LT_LANG
# _LT_LANG(LANGNAME)
# ------------------
m4_defun([_LT_LANG],
[m4_ifdef([_LT_LANG_]$1[_enabled], [],
[LT_SUPPORTED_TAG([$1])dnl
m4_append([_LT_TAGS], [$1 ])dnl
m4_define([_LT_LANG_]$1[_enabled], [])dnl
_LT_LANG_$1_CONFIG($1)])dnl
])# _LT_LANG
m4_ifndef([AC_PROG_GO], [
############################################################
# NOTE: This macro has been submitted for inclusion into #
# GNU Autoconf as AC_PROG_GO. When it is available in #
# a released version of Autoconf we should remove this #
# macro and use it instead. #
############################################################
m4_defun([AC_PROG_GO],
[AC_LANG_PUSH(Go)dnl
AC_ARG_VAR([GOC], [Go compiler command])dnl
AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
_AC_ARG_VAR_LDFLAGS()dnl
AC_CHECK_TOOL(GOC, gccgo)
if test -z "$GOC"; then
if test -n "$ac_tool_prefix"; then
AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
fi
fi
if test -z "$GOC"; then
AC_CHECK_PROG(GOC, gccgo, gccgo, false)
fi
])#m4_defun
])#m4_ifndef
# _LT_LANG_DEFAULT_CONFIG
# -----------------------
m4_defun([_LT_LANG_DEFAULT_CONFIG],
[AC_PROVIDE_IFELSE([AC_PROG_CXX],
[LT_LANG(CXX)],
[m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
AC_PROVIDE_IFELSE([AC_PROG_F77],
[LT_LANG(F77)],
[m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
AC_PROVIDE_IFELSE([AC_PROG_FC],
[LT_LANG(FC)],
[m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
dnl pulling things in needlessly.
AC_PROVIDE_IFELSE([AC_PROG_GCJ],
[LT_LANG(GCJ)],
[AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
[LT_LANG(GCJ)],
[AC_PROVIDE_IFELSE([LT_PROG_GCJ],
[LT_LANG(GCJ)],
[m4_ifdef([AC_PROG_GCJ],
[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
m4_ifdef([A][M_PROG_GCJ],
[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
m4_ifdef([LT_PROG_GCJ],
[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
AC_PROVIDE_IFELSE([AC_PROG_GO],
[LT_LANG(GO)],
[m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
AC_PROVIDE_IFELSE([LT_PROG_RC],
[LT_LANG(RC)],
[m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
])# _LT_LANG_DEFAULT_CONFIG
# Obsolete macros:
AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
dnl AC_DEFUN([AC_LIBTOOL_F77], [])
dnl AC_DEFUN([AC_LIBTOOL_FC], [])
dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
dnl AC_DEFUN([AC_LIBTOOL_RC], [])
# _LT_TAG_COMPILER
# ----------------
m4_defun([_LT_TAG_COMPILER],
[AC_REQUIRE([AC_PROG_CC])dnl
_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
# If no C compiler flags were specified, use CFLAGS.
LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
# Allow CC to be a program name with arguments.
compiler=$CC
])# _LT_TAG_COMPILER
# _LT_COMPILER_BOILERPLATE
# ------------------------
# Check for compiler boilerplate output or warnings with
# the simple compiler test code.
m4_defun([_LT_COMPILER_BOILERPLATE],
[m4_require([_LT_DECL_SED])dnl
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" >conftest.$ac_ext
eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
$RM conftest*
])# _LT_COMPILER_BOILERPLATE
# _LT_LINKER_BOILERPLATE
# ----------------------
# Check for linker boilerplate output or warnings with
# the simple link test code.
m4_defun([_LT_LINKER_BOILERPLATE],
[m4_require([_LT_DECL_SED])dnl
ac_outfile=conftest.$ac_objext
echo "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
$RM -r conftest*
])# _LT_LINKER_BOILERPLATE
# _LT_REQUIRED_DARWIN_CHECKS
# -------------------------
m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
case $host_os in
rhapsody* | darwin*)
AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
AC_CHECK_TOOL([LIPO], [lipo], [:])
AC_CHECK_TOOL([OTOOL], [otool], [:])
AC_CHECK_TOOL([OTOOL64], [otool64], [:])
_LT_DECL([], [DSYMUTIL], [1],
[Tool to manipulate archived DWARF debug symbol files on Mac OS X])
_LT_DECL([], [NMEDIT], [1],
[Tool to change global to local symbols on Mac OS X])
_LT_DECL([], [LIPO], [1],
[Tool to manipulate fat objects and archives on Mac OS X])
_LT_DECL([], [OTOOL], [1],
[ldd/readelf like tool for Mach-O binaries on Mac OS X])
_LT_DECL([], [OTOOL64], [1],
[ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
[lt_cv_apple_cc_single_mod=no
if test -z "$LT_MULTI_MODULE"; then
# By default we will add the -single_module flag. You can override
# by either setting the environment variable LT_MULTI_MODULE
# non-empty at configure time, or by adding -multi_module to the
# link flags.
rm -rf libconftest.dylib*
echo "int foo(void){return 1;}" > conftest.c
echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-dynamiclib -Wl,-single_module conftest.c 2>conftest.err
_lt_result=$?
# If there is a non-empty error log, and "single_module"
# appears in it, assume the flag caused a linker warning
if test -s conftest.err && $GREP single_module conftest.err; then
cat conftest.err >&AS_MESSAGE_LOG_FD
# Otherwise, if the output was created with a 0 exit code from
# the compiler, it worked.
elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
lt_cv_apple_cc_single_mod=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
fi
rm -rf libconftest.dylib*
rm -f conftest.*
fi])
AC_CACHE_CHECK([for -exported_symbols_list linker flag],
[lt_cv_ld_exported_symbols_list],
[lt_cv_ld_exported_symbols_list=no
save_LDFLAGS=$LDFLAGS
echo "_main" > conftest.sym
LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
[lt_cv_ld_exported_symbols_list=yes],
[lt_cv_ld_exported_symbols_list=no])
LDFLAGS=$save_LDFLAGS
])
AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
[lt_cv_ld_force_load=no
cat > conftest.c << _LT_EOF
int forced_loaded() { return 2;}
_LT_EOF
echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
$LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
echo "$AR $AR_FLAGS libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
$AR $AR_FLAGS libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
$RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
cat > conftest.c << _LT_EOF
int main() { return 0;}
_LT_EOF
echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
_lt_result=$?
if test -s conftest.err && $GREP force_load conftest.err; then
cat conftest.err >&AS_MESSAGE_LOG_FD
elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
lt_cv_ld_force_load=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
fi
rm -f conftest.err libconftest.a conftest conftest.c
rm -rf conftest.dSYM
])
case $host_os in
rhapsody* | darwin1.[[012]])
_lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
darwin1.*)
_lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
darwin*)
case $MACOSX_DEPLOYMENT_TARGET,$host in
10.[[012]],*|,*powerpc*-darwin[[5-8]]*)
_lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
*)
_lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
esac
;;
esac
if test yes = "$lt_cv_apple_cc_single_mod"; then
_lt_dar_single_mod='$single_module'
fi
if test yes = "$lt_cv_ld_exported_symbols_list"; then
_lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
else
_lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
fi
if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
fi
;;
esac
])
# _LT_DARWIN_LINKER_FEATURES([TAG])
# ---------------------------------
# Checks for linker and compiler features on darwin
m4_defun([_LT_DARWIN_LINKER_FEATURES],
[
m4_require([_LT_REQUIRED_DARWIN_CHECKS])
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
if test yes = "$lt_cv_ld_force_load"; then
_LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
[FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=''
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined
case $cc_basename in
ifort*|nagfor*) _lt_dar_can_shared=yes ;;
*) _lt_dar_can_shared=$GCC ;;
esac
if test yes = "$_lt_dar_can_shared"; then
output_verbose_link_cmd=func_echo_all
_LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
_LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
_LT_TAGVAR(archive_expsym_cmds, $1)="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
_LT_TAGVAR(module_expsym_cmds, $1)="$SED -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
m4_if([$1], [CXX],
[ if test yes != "$lt_cv_apple_cc_single_mod"; then
_LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
_LT_TAGVAR(archive_expsym_cmds, $1)="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
fi
],[])
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
])
# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
# ----------------------------------
# Links a minimal program and checks the executable
# for the system default hardcoded library path. In most cases,
# this is /usr/lib:/lib, but when the MPI compilers are used
# the location of the communication and MPI libs are included too.
# If we don't find anything, use the default library path according
# to the aix ld manual.
# Store the results from the different compilers for each TAGNAME.
# Allow to override them for all tags through lt_cv_aix_libpath.
m4_defun([_LT_SYS_MODULE_PATH_AIX],
[m4_require([_LT_DECL_SED])dnl
if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
[AC_LINK_IFELSE([AC_LANG_PROGRAM],[
lt_aix_libpath_sed='[
/Import File Strings/,/^$/ {
/^0/ {
s/^0 *\([^ ]*\) *$/\1/
p
}
}]'
_LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
_LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
fi],[])
if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
_LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib
fi
])
aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
fi
])# _LT_SYS_MODULE_PATH_AIX
# _LT_SHELL_INIT(ARG)
# -------------------
m4_define([_LT_SHELL_INIT],
[m4_divert_text([M4SH-INIT], [$1
])])# _LT_SHELL_INIT
# _LT_PROG_ECHO_BACKSLASH
# -----------------------
# Find how we can fake an echo command that does not interpret backslash.
# In particular, with Autoconf 2.60 or later we add some code to the start
# of the generated configure script that will find a shell with a builtin
# printf (that we can use as an echo command).
m4_defun([_LT_PROG_ECHO_BACKSLASH],
[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
AC_MSG_CHECKING([how to print strings])
# Test print first, because it will be a builtin if present.
if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
ECHO='print -r --'
elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
ECHO='printf %s\n'
else
# Use this function as a fallback that always works.
func_fallback_echo ()
{
eval 'cat <<_LTECHO_EOF
$[]1
_LTECHO_EOF'
}
ECHO='func_fallback_echo'
fi
# func_echo_all arg...
# Invoke $ECHO with all args, space-separated.
func_echo_all ()
{
$ECHO "$*"
}
case $ECHO in
printf*) AC_MSG_RESULT([printf]) ;;
print*) AC_MSG_RESULT([print -r]) ;;
*) AC_MSG_RESULT([cat]) ;;
esac
m4_ifdef([_AS_DETECT_SUGGESTED],
[_AS_DETECT_SUGGESTED([
test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
PATH=/empty FPATH=/empty; export PATH FPATH
test "X`printf %s $ECHO`" = "X$ECHO" \
|| test "X`print -r -- $ECHO`" = "X$ECHO" )])])
_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
])# _LT_PROG_ECHO_BACKSLASH
# _LT_WITH_SYSROOT
# ----------------
AC_DEFUN([_LT_WITH_SYSROOT],
[m4_require([_LT_DECL_SED])dnl
AC_MSG_CHECKING([for sysroot])
AC_ARG_WITH([sysroot],
[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@],
[Search for dependent libraries within DIR (or the compiler's sysroot
if not specified).])],
[], [with_sysroot=no])
dnl lt_sysroot will always be passed unquoted. We quote it here
dnl in case the user passed a directory name.
lt_sysroot=
case $with_sysroot in #(
yes)
if test yes = "$GCC"; then
lt_sysroot=`$CC --print-sysroot 2>/dev/null`
fi
;; #(
/*)
lt_sysroot=`echo "$with_sysroot" | $SED -e "$sed_quote_subst"`
;; #(
no|'')
;; #(
*)
AC_MSG_RESULT([$with_sysroot])
AC_MSG_ERROR([The sysroot must be an absolute path.])
;;
esac
AC_MSG_RESULT([${lt_sysroot:-no}])
_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
[dependent libraries, and where our libraries should be installed.])])
# _LT_ENABLE_LOCK
# ---------------
m4_defun([_LT_ENABLE_LOCK],
[AC_ARG_ENABLE([libtool-lock],
[AS_HELP_STRING([--disable-libtool-lock],
[avoid locking (might break parallel builds)])])
test no = "$enable_libtool_lock" || enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
# Find out what ABI is being produced by ac_compile, and set mode
# options accordingly.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `$FILECMD conftest.$ac_objext` in
*ELF-32*)
HPUX_IA64_MODE=32
;;
*ELF-64*)
HPUX_IA64_MODE=64
;;
esac
fi
rm -rf conftest*
;;
*-*-irix6*)
# Find out what ABI is being produced by ac_compile, and set linker
# options accordingly.
echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
if test yes = "$lt_cv_prog_gnu_ld"; then
case `$FILECMD conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -melf32bsmip"
;;
*N32*)
LD="${LD-ld} -melf32bmipn32"
;;
*64-bit*)
LD="${LD-ld} -melf64bmip"
;;
esac
else
case `$FILECMD conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
fi
rm -rf conftest*
;;
mips64*-*linux*)
# Find out what ABI is being produced by ac_compile, and set linker
# options accordingly.
echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
emul=elf
case `$FILECMD conftest.$ac_objext` in
*32-bit*)
emul="${emul}32"
;;
*64-bit*)
emul="${emul}64"
;;
esac
case `$FILECMD conftest.$ac_objext` in
*MSB*)
emul="${emul}btsmip"
;;
*LSB*)
emul="${emul}ltsmip"
;;
esac
case `$FILECMD conftest.$ac_objext` in
*N32*)
emul="${emul}n32"
;;
esac
LD="${LD-ld} -m $emul"
fi
rm -rf conftest*
;;
x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
# Find out what ABI is being produced by ac_compile, and set linker
# options accordingly. Note that the listed cases only cover the
# situations where additional linker options are needed (such as when
# doing 32-bit compilation for a host where ld defaults to 64-bit, or
# vice versa); the common cases where no linker options are needed do
# not appear in the list.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `$FILECMD conftest.o` in
*32-bit*)
case $host in
x86_64-*kfreebsd*-gnu)
LD="${LD-ld} -m elf_i386_fbsd"
;;
x86_64-*linux*)
case `$FILECMD conftest.o` in
*x86-64*)
LD="${LD-ld} -m elf32_x86_64"
;;
*)
LD="${LD-ld} -m elf_i386"
;;
esac
;;
powerpc64le-*linux*)
LD="${LD-ld} -m elf32lppclinux"
;;
powerpc64-*linux*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
LD="${LD-ld} -m elf_s390"
;;
sparc64-*linux*)
LD="${LD-ld} -m elf32_sparc"
;;
esac
;;
*64-bit*)
case $host in
x86_64-*kfreebsd*-gnu)
LD="${LD-ld} -m elf_x86_64_fbsd"
;;
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
powerpcle-*linux*)
LD="${LD-ld} -m elf64lppc"
;;
powerpc-*linux*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*|s390*-*tpf*)
LD="${LD-ld} -m elf64_s390"
;;
sparc*-*linux*)
LD="${LD-ld} -m elf64_sparc"
;;
esac
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_LANG_PUSH(C)
AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
AC_LANG_POP])
if test yes != "$lt_cv_cc_needs_belf"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS=$SAVE_CFLAGS
fi
;;
*-*solaris*)
# Find out what ABI is being produced by ac_compile, and set linker
# options accordingly.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `$FILECMD conftest.o` in
*64-bit*)
case $lt_cv_prog_gnu_ld in
yes*)
case $host in
i?86-*-solaris*|x86_64-*-solaris*)
LD="${LD-ld} -m elf_x86_64"
;;
sparc*-*-solaris*)
LD="${LD-ld} -m elf64_sparc"
;;
esac
# GNU ld 2.21 introduced _sol2 emulations. Use them if available.
if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
LD=${LD-ld}_sol2
fi
;;
*)
if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
LD="${LD-ld} -64"
fi
;;
esac
;;
esac
fi
rm -rf conftest*
;;
esac
need_locks=$enable_libtool_lock
])# _LT_ENABLE_LOCK
# _LT_PROG_AR
# -----------
m4_defun([_LT_PROG_AR],
[AC_CHECK_TOOLS(AR, [ar], false)
: ${AR=ar}
_LT_DECL([], [AR], [1], [The archiver])
# Use ARFLAGS variable as AR's operation code to sync the variable naming with
# Automake. If both AR_FLAGS and ARFLAGS are specified, AR_FLAGS should have
# higher priority because thats what people were doing historically (setting
# ARFLAGS for automake and AR_FLAGS for libtool). FIXME: Make the AR_FLAGS
# variable obsoleted/removed.
test ${AR_FLAGS+y} || AR_FLAGS=${ARFLAGS-cr}
lt_ar_flags=$AR_FLAGS
_LT_DECL([], [lt_ar_flags], [0], [Flags to create an archive (by configure)])
# Make AR_FLAGS overridable by 'make ARFLAGS='. Don't try to run-time override
# by AR_FLAGS because that was never working and AR_FLAGS is about to die.
_LT_DECL([], [AR_FLAGS], [\@S|@{ARFLAGS-"\@S|@lt_ar_flags"}],
[Flags to create an archive])
AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
[lt_cv_ar_at_file=no
AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
[echo conftest.$ac_objext > conftest.lst
lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
AC_TRY_EVAL([lt_ar_try])
if test 0 -eq "$ac_status"; then
# Ensure the archiver fails upon bogus file names.
rm -f conftest.$ac_objext libconftest.a
AC_TRY_EVAL([lt_ar_try])
if test 0 -ne "$ac_status"; then
lt_cv_ar_at_file=@
fi
fi
rm -f conftest.* libconftest.a
])
])
if test no = "$lt_cv_ar_at_file"; then
archiver_list_spec=
else
archiver_list_spec=$lt_cv_ar_at_file
fi
_LT_DECL([], [archiver_list_spec], [1],
[How to feed a file listing to the archiver])
])# _LT_PROG_AR
# _LT_CMD_OLD_ARCHIVE
# -------------------
m4_defun([_LT_CMD_OLD_ARCHIVE],
[_LT_PROG_AR
AC_CHECK_TOOL(STRIP, strip, :)
test -z "$STRIP" && STRIP=:
_LT_DECL([], [STRIP], [1], [A symbol stripping program])
AC_CHECK_TOOL(RANLIB, ranlib, :)
test -z "$RANLIB" && RANLIB=:
_LT_DECL([], [RANLIB], [1],
[Commands used to install an old-style archive])
# Determine commands to create old-style static archives.
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=
if test -n "$RANLIB"; then
case $host_os in
bitrig* | openbsd*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
;;
*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
;;
esac
old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
fi
case $host_os in
darwin*)
lock_old_archive_extraction=yes ;;
*)
lock_old_archive_extraction=no ;;
esac
_LT_DECL([], [old_postinstall_cmds], [2])
_LT_DECL([], [old_postuninstall_cmds], [2])
_LT_TAGDECL([], [old_archive_cmds], [2],
[Commands used to build an old-style archive])
_LT_DECL([], [lock_old_archive_extraction], [0],
[Whether to use a lock for old archive extraction])
])# _LT_CMD_OLD_ARCHIVE
# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
# ----------------------------------------------------------------
# Check whether the given compiler option works
AC_DEFUN([_LT_COMPILER_OPTION],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
[$2=no
m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&AS_MESSAGE_LOG_FD
echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
$ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
$2=yes
fi
fi
$RM conftest*
])
if test yes = "[$]$2"; then
m4_if([$5], , :, [$5])
else
m4_if([$6], , :, [$6])
fi
])# _LT_COMPILER_OPTION
# Old name:
AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
# [ACTION-SUCCESS], [ACTION-FAILURE])
# ----------------------------------------------------
# Check whether the given linker option works
AC_DEFUN([_LT_LINKER_OPTION],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
[$2=no
save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS $3"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&AS_MESSAGE_LOG_FD
$ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if diff conftest.exp conftest.er2 >/dev/null; then
$2=yes
fi
else
$2=yes
fi
fi
$RM -r conftest*
LDFLAGS=$save_LDFLAGS
])
if test yes = "[$]$2"; then
m4_if([$4], , :, [$4])
else
m4_if([$5], , :, [$5])
fi
])# _LT_LINKER_OPTION
# Old name:
AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
# LT_CMD_MAX_LEN
#---------------
AC_DEFUN([LT_CMD_MAX_LEN],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
# find the maximum length of command line arguments
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
i=0
teststring=ABCD
case $build_os in
msdosdjgpp*)
# On DJGPP, this test can blow up pretty badly due to problems in libc
# (any single argument exceeding 2000 bytes causes a buffer overrun
# during glob expansion). Even if it were fixed, the result of this
# check would be larger than it should be.
lt_cv_sys_max_cmd_len=12288; # 12K is about right
;;
gnu*)
# Under GNU Hurd, this test is not required because there is
# no limit to the length of command line arguments.
# Libtool will interpret -1 as no limit whatsoever
lt_cv_sys_max_cmd_len=-1;
;;
cygwin* | mingw* | cegcc*)
# On Win9x/ME, this test blows up -- it succeeds, but takes
# about 5 minutes as the teststring grows exponentially.
# Worse, since 9x/ME are not pre-emptively multitasking,
# you end up with a "frozen" computer, even though with patience
# the test eventually succeeds (with a max line length of 256k).
# Instead, let's just punt: use the minimum linelength reported by
# all of the supported platforms: 8192 (on NT/2K/XP).
lt_cv_sys_max_cmd_len=8192;
;;
mint*)
# On MiNT this can take a long time and run out of memory.
lt_cv_sys_max_cmd_len=8192;
;;
amigaos*)
# On AmigaOS with pdksh, this test takes hours, literally.
# So we just punt and use a minimum line length of 8192.
lt_cv_sys_max_cmd_len=8192;
;;
bitrig* | darwin* | dragonfly* | freebsd* | midnightbsd* | netbsd* | openbsd*)
# This has been around since 386BSD, at least. Likely further.
if test -x /sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
elif test -x /usr/sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
else
lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
fi
# And add a safety zone
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
;;
interix*)
# We know the value 262144 and hardcode it with a safety zone (like BSD)
lt_cv_sys_max_cmd_len=196608
;;
os2*)
# The test takes a long time on OS/2.
lt_cv_sys_max_cmd_len=8192
;;
osf*)
# Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
# due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
# nice to cause kernel panics so lets avoid the loop below.
# First set a reasonable default.
lt_cv_sys_max_cmd_len=16384
#
if test -x /sbin/sysconfig; then
case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
*1*) lt_cv_sys_max_cmd_len=-1 ;;
esac
fi
;;
sco3.2v5*)
lt_cv_sys_max_cmd_len=102400
;;
sysv5* | sco5v6* | sysv4.2uw2*)
kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
if test -n "$kargmax"; then
lt_cv_sys_max_cmd_len=`echo $kargmax | $SED 's/.*[[ ]]//'`
else
lt_cv_sys_max_cmd_len=32768
fi
;;
*)
lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
if test -n "$lt_cv_sys_max_cmd_len" && \
test undefined != "$lt_cv_sys_max_cmd_len"; then
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
# Make teststring a little bigger before we do anything with it.
# a 1K string should be a reasonable start.
for i in 1 2 3 4 5 6 7 8; do
teststring=$teststring$teststring
done
SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
while { test X`env echo "$teststring$teststring" 2>/dev/null` \
= "X$teststring$teststring"; } >/dev/null 2>&1 &&
test 17 != "$i" # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
done
# Only check the string length outside the loop.
lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
teststring=
# Add a significant safety factor because C++ compilers can tack on
# massive amounts of additional arguments before passing them to the
# linker. It appears as though 1/2 is a usable value.
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
fi
;;
esac
])
if test -n "$lt_cv_sys_max_cmd_len"; then
AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
else
AC_MSG_RESULT(none)
fi
max_cmd_len=$lt_cv_sys_max_cmd_len
_LT_DECL([], [max_cmd_len], [0],
[What is the maximum length of a command?])
])# LT_CMD_MAX_LEN
# Old name:
AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
# _LT_HEADER_DLFCN
# ----------------
m4_defun([_LT_HEADER_DLFCN],
[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
])# _LT_HEADER_DLFCN
# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
# ----------------------------------------------------------------
m4_defun([_LT_TRY_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
if test yes = "$cross_compiling"; then :
[$4]
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
[#line $LINENO "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
#include
#endif
#include
#ifdef RTLD_GLOBAL
# define LT_DLGLOBAL RTLD_GLOBAL
#else
# ifdef DL_GLOBAL
# define LT_DLGLOBAL DL_GLOBAL
# else
# define LT_DLGLOBAL 0
# endif
#endif
/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
# ifdef RTLD_LAZY
# define LT_DLLAZY_OR_NOW RTLD_LAZY
# else
# ifdef DL_LAZY
# define LT_DLLAZY_OR_NOW DL_LAZY
# else
# ifdef RTLD_NOW
# define LT_DLLAZY_OR_NOW RTLD_NOW
# else
# ifdef DL_NOW
# define LT_DLLAZY_OR_NOW DL_NOW
# else
# define LT_DLLAZY_OR_NOW 0
# endif
# endif
# endif
# endif
#endif
/* When -fvisibility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
int fnord () { return 42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
int status = $lt_dlunknown;
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
else
{
if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
else puts (dlerror ());
}
/* dlclose (self); */
}
else
puts (dlerror ());
return status;
}]
_LT_EOF
if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) $1 ;;
x$lt_dlneed_uscore) $2 ;;
x$lt_dlunknown|x*) $3 ;;
esac
else :
# compilation failed
$3
fi
fi
rm -fr conftest*
])# _LT_TRY_DLOPEN_SELF
# LT_SYS_DLOPEN_SELF
# ------------------
AC_DEFUN([LT_SYS_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
if test yes != "$enable_dlopen"; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
else
lt_cv_dlopen=no
lt_cv_dlopen_libs=
case $host_os in
beos*)
lt_cv_dlopen=load_add_on
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32* | cegcc*)
lt_cv_dlopen=LoadLibrary
lt_cv_dlopen_libs=
;;
cygwin*)
lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=
;;
darwin*)
# if libdl is installed we need to link against it
AC_CHECK_LIB([dl], [dlopen],
[lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[
lt_cv_dlopen=dyld
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
])
;;
tpf*)
# Don't try to run any link tests for TPF. We know it's impossible
# because TPF is a cross-compiler, and we know how we open DSOs.
lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=
lt_cv_dlopen_self=no
;;
*)
AC_CHECK_FUNC([shl_load],
[lt_cv_dlopen=shl_load],
[AC_CHECK_LIB([dld], [shl_load],
[lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld],
[AC_CHECK_FUNC([dlopen],
[lt_cv_dlopen=dlopen],
[AC_CHECK_LIB([dl], [dlopen],
[lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],
[AC_CHECK_LIB([svld], [dlopen],
[lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld],
[AC_CHECK_LIB([dld], [dld_link],
[lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld])
])
])
])
])
])
;;
esac
if test no = "$lt_cv_dlopen"; then
enable_dlopen=no
else
enable_dlopen=yes
fi
case $lt_cv_dlopen in
dlopen)
save_CPPFLAGS=$CPPFLAGS
test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
save_LDFLAGS=$LDFLAGS
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
save_LIBS=$LIBS
LIBS="$lt_cv_dlopen_libs $LIBS"
AC_CACHE_CHECK([whether a program can dlopen itself],
lt_cv_dlopen_self, [dnl
_LT_TRY_DLOPEN_SELF(
lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
])
if test yes = "$lt_cv_dlopen_self"; then
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
lt_cv_dlopen_self_static, [dnl
_LT_TRY_DLOPEN_SELF(
lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
])
fi
CPPFLAGS=$save_CPPFLAGS
LDFLAGS=$save_LDFLAGS
LIBS=$save_LIBS
;;
esac
case $lt_cv_dlopen_self in
yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
*) enable_dlopen_self=unknown ;;
esac
case $lt_cv_dlopen_self_static in
yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
*) enable_dlopen_self_static=unknown ;;
esac
fi
_LT_DECL([dlopen_support], [enable_dlopen], [0],
[Whether dlopen is supported])
_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
[Whether dlopen of programs is supported])
_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
[Whether dlopen of statically linked programs is supported])
])# LT_SYS_DLOPEN_SELF
# Old name:
AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
# _LT_COMPILER_C_O([TAGNAME])
# ---------------------------
# Check to see if options -c and -o are simultaneously supported by compiler.
# This macro does not hard code the compiler like AC_PROG_CC_C_O.
m4_defun([_LT_COMPILER_C_O],
[m4_require([_LT_DECL_SED])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_TAG_COMPILER])dnl
AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
[_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
[_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
$RM -r conftest 2>/dev/null
mkdir conftest
cd conftest
mkdir out
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&AS_MESSAGE_LOG_FD
echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
$ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
fi
fi
chmod u+w . 2>&AS_MESSAGE_LOG_FD
$RM conftest*
# SGI C++ compiler will create directory out/ii_files/ for
# template instantiation
test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
$RM out/* && rmdir out
cd ..
$RM -r conftest
$RM conftest*
])
_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
[Does compiler simultaneously support -c and -o options?])
])# _LT_COMPILER_C_O
# _LT_COMPILER_FILE_LOCKS([TAGNAME])
# ----------------------------------
# Check to see if we can do hard links to lock some files if needed
m4_defun([_LT_COMPILER_FILE_LOCKS],
[m4_require([_LT_ENABLE_LOCK])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
_LT_COMPILER_C_O([$1])
hard_links=nottested
if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then
# do not overwrite the value of need_locks provided by the user
AC_MSG_CHECKING([if we can lock with hard links])
hard_links=yes
$RM conftest*
ln conftest.a conftest.b 2>/dev/null && hard_links=no
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
AC_MSG_RESULT([$hard_links])
if test no = "$hard_links"; then
AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe])
need_locks=warn
fi
else
need_locks=no
fi
_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
])# _LT_COMPILER_FILE_LOCKS
# _LT_CHECK_OBJDIR
# ----------------
m4_defun([_LT_CHECK_OBJDIR],
[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
[rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
if test -d .libs; then
lt_cv_objdir=.libs
else
# MS-DOS does not allow filenames that begin with a dot.
lt_cv_objdir=_libs
fi
rmdir .libs 2>/dev/null])
objdir=$lt_cv_objdir
_LT_DECL([], [objdir], [0],
[The name of the directory that contains temporary libtool files])dnl
m4_pattern_allow([LT_OBJDIR])dnl
AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/",
[Define to the sub-directory where libtool stores uninstalled libraries.])
])# _LT_CHECK_OBJDIR
# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
# --------------------------------------
# Check hardcoding attributes.
m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
[AC_MSG_CHECKING([how to hardcode library paths into programs])
_LT_TAGVAR(hardcode_action, $1)=
if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
test -n "$_LT_TAGVAR(runpath_var, $1)" ||
test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then
# We can hardcode non-existent directories.
if test no != "$_LT_TAGVAR(hardcode_direct, $1)" &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" &&
test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then
# Linking always hardcodes the temporary library directory.
_LT_TAGVAR(hardcode_action, $1)=relink
else
# We can link without hardcoding, and we can hardcode nonexisting dirs.
_LT_TAGVAR(hardcode_action, $1)=immediate
fi
else
# We cannot hardcode anything, or else we can only hardcode existing
# directories.
_LT_TAGVAR(hardcode_action, $1)=unsupported
fi
AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
if test relink = "$_LT_TAGVAR(hardcode_action, $1)" ||
test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then
# Fast installation is not supported
enable_fast_install=no
elif test yes = "$shlibpath_overrides_runpath" ||
test no = "$enable_shared"; then
# Fast installation is not necessary
enable_fast_install=needless
fi
_LT_TAGDECL([], [hardcode_action], [0],
[How to hardcode a shared library path into an executable])
])# _LT_LINKER_HARDCODE_LIBPATH
# _LT_CMD_STRIPLIB
# ----------------
m4_defun([_LT_CMD_STRIPLIB],
[m4_require([_LT_DECL_EGREP])
striplib=
old_striplib=
AC_MSG_CHECKING([whether stripping libraries is possible])
if test -z "$STRIP"; then
AC_MSG_RESULT([no])
else
if $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
old_striplib="$STRIP --strip-debug"
striplib="$STRIP --strip-unneeded"
AC_MSG_RESULT([yes])
else
case $host_os in
darwin*)
# FIXME - insert some real tests, host_os isn't really good enough
striplib="$STRIP -x"
old_striplib="$STRIP -S"
AC_MSG_RESULT([yes])
;;
freebsd*)
if $STRIP -V 2>&1 | $GREP "elftoolchain" >/dev/null; then
old_striplib="$STRIP --strip-debug"
striplib="$STRIP --strip-unneeded"
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
;;
*)
AC_MSG_RESULT([no])
;;
esac
fi
fi
_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
_LT_DECL([], [striplib], [1])
])# _LT_CMD_STRIPLIB
# _LT_PREPARE_MUNGE_PATH_LIST
# ---------------------------
# Make sure func_munge_path_list() is defined correctly.
m4_defun([_LT_PREPARE_MUNGE_PATH_LIST],
[[# func_munge_path_list VARIABLE PATH
# -----------------------------------
# VARIABLE is name of variable containing _space_ separated list of
# directories to be munged by the contents of PATH, which is string
# having a format:
# "DIR[:DIR]:"
# string "DIR[ DIR]" will be prepended to VARIABLE
# ":DIR[:DIR]"
# string "DIR[ DIR]" will be appended to VARIABLE
# "DIRP[:DIRP]::[DIRA:]DIRA"
# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
# "DIRA[ DIRA]" will be appended to VARIABLE
# "DIR[:DIR]"
# VARIABLE will be replaced by "DIR[ DIR]"
func_munge_path_list ()
{
case x@S|@2 in
x)
;;
*:)
eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\"
;;
x:*)
eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\"
;;
*::*)
eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\"
;;
*)
eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\"
;;
esac
}
]])# _LT_PREPARE_PATH_LIST
# _LT_SYS_DYNAMIC_LINKER([TAG])
# -----------------------------
# PORTME Fill in your ld.so characteristics
m4_defun([_LT_SYS_DYNAMIC_LINKER],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_OBJDUMP])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_CHECK_SHELL_FEATURES])dnl
m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl
AC_MSG_CHECKING([dynamic linker characteristics])
m4_if([$1],
[], [
if test yes = "$GCC"; then
case $host_os in
darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
*) lt_awk_arg='/^libraries:/' ;;
esac
case $host_os in
mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;;
*) lt_sed_strip_eq='s|=/|/|g' ;;
esac
lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
case $lt_search_path_spec in
*\;*)
# if the path contains ";" then we assume it to be the separator
# otherwise default to the standard path separator (i.e. ":") - it is
# assumed that no part of a normal pathname contains ";" but that should
# okay in the real world where ";" in dirpaths is itself problematic.
lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
;;
*)
lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
;;
esac
# Ok, now we have the path, separated by spaces, we can step through it
# and add multilib dir if necessary...
lt_tmp_lt_search_path_spec=
lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
# ...but if some path component already ends with the multilib dir we assume
# that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
case "$lt_multi_os_dir; $lt_search_path_spec " in
"/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
lt_multi_os_dir=
;;
esac
for lt_sys_path in $lt_search_path_spec; do
if test -d "$lt_sys_path$lt_multi_os_dir"; then
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
elif test -n "$lt_multi_os_dir"; then
test -d "$lt_sys_path" && \
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
BEGIN {RS = " "; FS = "/|\n";} {
lt_foo = "";
lt_count = 0;
for (lt_i = NF; lt_i > 0; lt_i--) {
if ($lt_i != "" && $lt_i != ".") {
if ($lt_i == "..") {
lt_count++;
} else {
if (lt_count == 0) {
lt_foo = "/" $lt_i lt_foo;
} else {
lt_count--;
}
}
}
}
if (lt_foo != "") { lt_freq[[lt_foo]]++; }
if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
}'`
# AWK program above erroneously prepends '/' to C:/dos/paths
# for these hosts.
case $host_os in
mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
$SED 's|/\([[A-Za-z]]:\)|\1|g'` ;;
esac
sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi])
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=.so
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
need_lib_prefix=unknown
hardcode_into_libs=no
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
need_version=unknown
AC_ARG_VAR([LT_SYS_LIBRARY_PATH],
[User-defined run-time library search path.])
case $host_os in
aix3*)
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
soname_spec='$libname$release$shared_ext$major'
;;
aix[[4-9]]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
if test ia64 = "$host_cpu"; then
# AIX 5 supports IA64
library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
# the line '#! .'. This would cause the generated library to
# depend on '.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[[01]] | aix4.[[01]].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
# Using Import Files as archive members, it is possible to support
# filename-based versioning of shared library archives on AIX. While
# this would work for both with and without runtime linking, it will
# prevent static linking of such archives. So we do filename-based
# shared library versioning with .so extension only, which is used
# when both runtime linking and shared linking is enabled.
# Unfortunately, runtime linking may impact performance, so we do
# not want this to be the default eventually. Also, we use the
# versioned .so libs for executables only if there is the -brtl
# linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
# To allow for filename-based versioning support, we need to create
# libNAME.so.V as an archive file, containing:
# *) an Import File, referring to the versioned filename of the
# archive as well as the shared archive member, telling the
# bitwidth (32 or 64) of that shared object, and providing the
# list of exported symbols of that shared object, eventually
# decorated with the 'weak' keyword
# *) the shared object with the F_LOADONLY flag set, to really avoid
# it being seen by the linker.
# At run time we better use the real file rather than another symlink,
# but for link time we create the symlink libNAME.so -> libNAME.so.V
case $with_aix_soname,$aix_use_runtimelinking in
# AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
aix,yes) # traditional libtool
dynamic_linker='AIX unversionable lib.so'
# If using run time linking (on AIX 4.2 or later) use lib.so
# instead of lib.a to let people know that these are not
# typical AIX shared libraries.
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
aix,no) # traditional AIX only
dynamic_linker='AIX lib.a[(]lib.so.V[)]'
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
library_names_spec='$libname$release.a $libname.a'
soname_spec='$libname$release$shared_ext$major'
;;
svr4,*) # full svr4 only
dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]"
library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
# We do not specify a path in Import Files, so LIBPATH fires.
shlibpath_overrides_runpath=yes
;;
*,yes) # both, prefer svr4
dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]"
library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
# unpreferred sharedlib libNAME.a needs extra handling
postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
# We do not specify a path in Import Files, so LIBPATH fires.
shlibpath_overrides_runpath=yes
;;
*,no) # both, prefer aix
dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]"
library_names_spec='$libname$release.a $libname.a'
soname_spec='$libname$release$shared_ext$major'
# unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
;;
esac
shlibpath_var=LIBPATH
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# Since July 2007 AmigaOS4 officially supports .so libraries.
# When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
beos*)
library_names_spec='$libname$shared_ext'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
bsdi[[45]]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
# the default ld.so.conf also contains /usr/contrib/lib and
# /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
# libtool to hard-code these into programs
;;
cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
shrext_cmds=.dll
need_version=no
need_lib_prefix=no
case $GCC,$cc_basename in
yes,*)
# gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \$file`~
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
chmod a+x \$dldir/$dlname~
if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
fi'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$RM \$dlpath'
shlibpath_overrides_runpath=yes
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
soname_spec='`echo $libname | $SED -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
m4_if([$1], [],[
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
library_names_spec='`echo $libname | $SED -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
;;
esac
dynamic_linker='Win32 ld.exe'
;;
*,cl* | *,icl*)
# Native MSVC or ICC
libname_spec='$name'
soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
library_names_spec='$libname.dll.lib'
case $build_os in
mingw*)
sys_lib_search_path_spec=
lt_save_ifs=$IFS
IFS=';'
for lt_path in $LIB
do
IFS=$lt_save_ifs
# Let DOS variable expansion print the short 8.3 style file name.
lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
done
IFS=$lt_save_ifs
# Convert to MSYS style.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
;;
cygwin*)
# Convert to unix form, then to dos form, then back to unix form
# but this time dos style (no spaces!) so that the unix form looks
# like /cygdrive/c/PROGRA~1:/cygdr...
sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
;;
*)
sys_lib_search_path_spec=$LIB
if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
# It is most probably a Windows format PATH.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
else
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
fi
# FIXME: find the short name or the path components, as spaces are
# common. (e.g. "Program Files" -> "PROGRA~1")
;;
esac
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \$file`~
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$RM \$dlpath'
shlibpath_overrides_runpath=yes
dynamic_linker='Win32 link.exe'
;;
*)
# Assume MSVC and ICC wrapper
library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib'
dynamic_linker='Win32 ld.exe'
;;
esac
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
darwin* | rhapsody*)
dynamic_linker="$host_os dyld"
version_type=darwin
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
soname_spec='$libname$release$major$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
m4_if([$1], [],[
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
dgux*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
freebsd* | dragonfly* | midnightbsd*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
if test -x /usr/bin/objformat; then
objformat=`/usr/bin/objformat`
else
case $host_os in
freebsd[[23]].*) objformat=aout ;;
*) objformat=elf ;;
esac
fi
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
need_version=yes
;;
esac
shlibpath_var=LD_LIBRARY_PATH
case $host_os in
freebsd2.*)
shlibpath_overrides_runpath=yes
;;
freebsd3.[[01]]* | freebsdelf3.[[01]]*)
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
*) # from 4.6 on, and DragonFly
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
esac
;;
haiku*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
dynamic_linker="$host_os runtime_loader"
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LIBRARY_PATH
shlibpath_overrides_runpath=no
sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
hardcode_into_libs=yes
;;
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
version_type=sunos
need_lib_prefix=no
need_version=no
case $host_cpu in
ia64*)
shrext_cmds='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
if test 32 = "$HPUX_IA64_MODE"; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
sys_lib_dlsearch_path_spec=/usr/lib/hpux32
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
sys_lib_dlsearch_path_spec=/usr/lib/hpux64
fi
;;
hppa*64*)
shrext_cmds='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555, ...
postinstall_cmds='chmod 555 $lib'
# or fails outright, so override atomically:
install_override_mode=555
;;
interix[[3-9]]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
irix5* | irix6* | nonstopux*)
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
if test yes = "$lt_cv_prog_gnu_ld"; then
version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
fi ;;
esac
need_lib_prefix=no
need_version=no
soname_spec='$libname$release$shared_ext$major'
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
;;
*)
case $LD in # libtool.m4 will add one of these switches to LD
*-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
libsuff= shlibsuff= libmagic=32-bit;;
*-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
libsuff=32 shlibsuff=N32 libmagic=N32;;
*-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
libsuff=64 shlibsuff=64 libmagic=64-bit;;
*) libsuff= shlibsuff= libmagic=never-match;;
esac
;;
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
hardcode_into_libs=yes
;;
# No shared lib support for Linux oldld, aout, or coff.
linux*oldld* | linux*aout* | linux*coff*)
dynamic_linker=no
;;
linux*android*)
version_type=none # Android doesn't support versioned libraries.
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext'
soname_spec='$libname$release$shared_ext'
finish_cmds=
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
hardcode_into_libs=yes
dynamic_linker='Android linker'
# Don't embed -rpath directories since the linker doesn't support them.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
;;
# This must be glibc/ELF.
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
# Some binutils ld are patched to set DT_RUNPATH
AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
[lt_cv_shlibpath_overrides_runpath=no
save_LDFLAGS=$LDFLAGS
save_libdir=$libdir
eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
[AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
[lt_cv_shlibpath_overrides_runpath=yes])])
LDFLAGS=$save_LDFLAGS
libdir=$save_libdir
])
shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
hardcode_into_libs=yes
# Add ABI-specific directories to the system library path.
sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
# Ideally, we could use ldconfig to report *all* directores which are
# searched for libraries, however this is still not possible. Aside from not
# being certain /sbin/ldconfig is available, command
# 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
# even though it is searched at run-time. Try to do the best guess by
# appending ld.so.conf contents (and includes) to the search path.
if test -f /etc/ld.so.conf; then
lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
;;
netbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
newsos6)
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
*nto* | *qnx*)
version_type=qnx
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='ldqnx.so'
;;
openbsd* | bitrig*)
version_type=sunos
sys_lib_dlsearch_path_spec=/usr/lib
need_lib_prefix=no
if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
need_version=no
else
need_version=yes
fi
library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
os2*)
libname_spec='$name'
version_type=windows
shrext_cmds=.dll
need_version=no
need_lib_prefix=no
# OS/2 can only load a DLL with a base name of 8 characters or less.
soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
v=$($ECHO $release$versuffix | tr -d .-);
n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
$ECHO $n$v`$shared_ext'
library_names_spec='${libname}_dll.$libext'
dynamic_linker='OS/2 ld.exe'
shlibpath_var=BEGINLIBPATH
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
postinstall_cmds='base_file=`basename \$file`~
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
chmod a+x \$dldir/$dlname~
if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
fi'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
dlpath=$dir/\$dldll~
$RM \$dlpath'
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
soname_spec='$libname$release$shared_ext$major'
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
rdos*)
dynamic_linker=no
;;
solaris*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
# ldd complains unless libraries are executable
postinstall_cmds='chmod +x $lib'
;;
sunos4*)
version_type=sunos
library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
if test yes = "$with_gnu_ld"; then
need_lib_prefix=no
fi
need_version=yes
;;
sysv4 | sysv4.3*)
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
shlibpath_overrides_runpath=no
need_lib_prefix=no
runpath_var=LD_RUN_PATH
;;
siemens)
need_lib_prefix=no
;;
motorola)
need_lib_prefix=no
need_version=no
shlibpath_overrides_runpath=no
sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
;;
esac
;;
sysv4*MP*)
if test -d /usr/nec; then
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
soname_spec='$libname$shared_ext.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
version_type=sco
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
if test yes = "$with_gnu_ld"; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
case $host_os in
sco3.2v5*)
sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
;;
esac
fi
sys_lib_dlsearch_path_spec='/usr/lib'
;;
tpf*)
# TPF is a cross-target only. Preferred cross-host = GNU/Linux.
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
uts4*)
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
*)
dynamic_linker=no
;;
esac
AC_MSG_RESULT([$dynamic_linker])
test no = "$dynamic_linker" && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test yes = "$GCC"; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
fi
if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
fi
# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
_LT_DECL([], [variables_saved_for_relink], [1],
[Variables whose values should be saved in libtool wrapper scripts and
restored at link time])
_LT_DECL([], [need_lib_prefix], [0],
[Do we need the "lib" prefix for modules?])
_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
_LT_DECL([], [version_type], [0], [Library versioning type])
_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
_LT_DECL([], [shlibpath_overrides_runpath], [0],
[Is shlibpath searched before the hard-coded library search path?])
_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
_LT_DECL([], [library_names_spec], [1],
[[List of archive names. First name is the real one, the rest are links.
The last name is the one that the linker finds with -lNAME]])
_LT_DECL([], [soname_spec], [1],
[[The coded name of the library, if different from the real name]])
_LT_DECL([], [install_override_mode], [1],
[Permission mode override for installation of shared libraries])
_LT_DECL([], [postinstall_cmds], [2],
[Command to use after installation of a shared archive])
_LT_DECL([], [postuninstall_cmds], [2],
[Command to use after uninstallation of a shared archive])
_LT_DECL([], [finish_cmds], [2],
[Commands used to finish a libtool library installation in a directory])
_LT_DECL([], [finish_eval], [1],
[[As "finish_cmds", except a single script fragment to be evaled but
not shown]])
_LT_DECL([], [hardcode_into_libs], [0],
[Whether we should hardcode library paths into libraries])
_LT_DECL([], [sys_lib_search_path_spec], [2],
[Compile-time system search path for libraries])
_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2],
[Detected run-time system search path for libraries])
_LT_DECL([], [configure_time_lt_sys_library_path], [2],
[Explicit LT_SYS_LIBRARY_PATH set during ./configure time])
])# _LT_SYS_DYNAMIC_LINKER
# _LT_PATH_TOOL_PREFIX(TOOL)
# --------------------------
# find a file program that can recognize shared library
AC_DEFUN([_LT_PATH_TOOL_PREFIX],
[m4_require([_LT_DECL_EGREP])dnl
AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
[case $MAGIC_CMD in
[[\\/*] | ?:[\\/]*])
lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
lt_save_MAGIC_CMD=$MAGIC_CMD
lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word. This closes a longstanding sh security hole.
ac_dummy="m4_if([$2], , $PATH, [$2])"
for ac_dir in $ac_dummy; do
IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$1"; then
lt_cv_path_MAGIC_CMD=$ac_dir/"$1"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
else
cat <<_LT_EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such. This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem. Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org
_LT_EOF
fi ;;
esac
fi
break
fi
done
IFS=$lt_save_ifs
MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac])
MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
AC_MSG_RESULT($MAGIC_CMD)
else
AC_MSG_RESULT(no)
fi
_LT_DECL([], [MAGIC_CMD], [0],
[Used to examine libraries when file_magic_cmd begins with "file"])dnl
])# _LT_PATH_TOOL_PREFIX
# Old name:
AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
# _LT_PATH_MAGIC
# --------------
# find a file program that can recognize a shared library
m4_defun([_LT_PATH_MAGIC],
[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
_LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
else
MAGIC_CMD=:
fi
fi
])# _LT_PATH_MAGIC
# LT_PATH_LD
# ----------
# find the pathname to the GNU or non-GNU linker
AC_DEFUN([LT_PATH_LD],
[AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
AC_ARG_WITH([gnu-ld],
[AS_HELP_STRING([--with-gnu-ld],
[assume the C compiler uses GNU ld @<:@default=no@:>@])],
[test no = "$withval" || with_gnu_ld=yes],
[with_gnu_ld=no])dnl
ac_prog=ld
if test yes = "$GCC"; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by $CC])
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return, which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
case $ac_prog in
# Accept absolute paths.
[[\\/]]* | ?:[[\\/]]*)
re_direlt='/[[^/]][[^/]]*/\.\./'
# Canonicalize the pathname of ld
ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
test -z "$LD" && LD=$ac_prog
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test yes = "$with_gnu_ld"; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(lt_cv_path_LD,
[if test -z "$LD"; then
lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD=$ac_dir/$ac_prog
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 &1 conftest.i
cat conftest.i conftest.i >conftest2.i
: ${lt_DD:=$DD}
AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd],
[if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then
cmp -s conftest.i conftest.out \
&& ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
fi])
rm -f conftest.i conftest2.i conftest.out])
])# _LT_PATH_DD
# _LT_CMD_TRUNCATE
# ----------------
# find command to truncate a binary pipe
m4_defun([_LT_CMD_TRUNCATE],
[m4_require([_LT_PATH_DD])
AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin],
[printf 0123456789abcdef0123456789abcdef >conftest.i
cat conftest.i conftest.i >conftest2.i
lt_cv_truncate_bin=
if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then
cmp -s conftest.i conftest.out \
&& lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
fi
rm -f conftest.i conftest2.i conftest.out
test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"])
_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1],
[Command to truncate a binary pipe])
])# _LT_CMD_TRUNCATE
# _LT_CHECK_MAGIC_METHOD
# ----------------------
# how to check for library dependencies
# -- PORTME fill in with the dynamic library characteristics
m4_defun([_LT_CHECK_MAGIC_METHOD],
[m4_require([_LT_DECL_EGREP])
m4_require([_LT_DECL_OBJDUMP])
AC_CACHE_CHECK([how to recognize dependent libraries],
lt_cv_deplibs_check_method,
[lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# 'unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
# that responds to the $file_magic_cmd with a given extended regex.
# If you have 'file' or equivalent on your system and you're not sure
# whether 'pass_all' will *always* work, you probably want this one.
case $host_os in
aix[[4-9]]*)
lt_cv_deplibs_check_method=pass_all
;;
beos*)
lt_cv_deplibs_check_method=pass_all
;;
bsdi[[45]]*)
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
lt_cv_file_magic_cmd='$FILECMD -L'
lt_cv_file_magic_test_file=/shlib/libc.so
;;
cygwin*)
# func_win32_libid is a shell function defined in ltmain.sh
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
;;
mingw* | pw32*)
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
if ( file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
# Keep this pattern in sync with the one in func_win32_libid.
lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
lt_cv_file_magic_cmd='$OBJDUMP -f'
fi
;;
cegcc*)
# use the weaker test based on 'objdump'. See mingw*.
lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
;;
darwin* | rhapsody*)
lt_cv_deplibs_check_method=pass_all
;;
freebsd* | dragonfly* | midnightbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
case $host_cpu in
i*86 )
# Not sure whether the presence of OpenBSD here was a mistake.
# Let's accept both of them until this is cleared up.
lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
lt_cv_file_magic_cmd=$FILECMD
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
esac
else
lt_cv_deplibs_check_method=pass_all
fi
;;
haiku*)
lt_cv_deplibs_check_method=pass_all
;;
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=$FILECMD
case $host_cpu in
ia64*)
lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
;;
hppa*64*)
[lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
;;
*)
lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
lt_cv_file_magic_test_file=/usr/lib/libc.sl
;;
esac
;;
interix[[3-9]]*)
# PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
;;
irix5* | irix6* | nonstopux*)
case $LD in
*-32|*"-32 ") libmagic=32-bit;;
*-n32|*"-n32 ") libmagic=N32;;
*-64|*"-64 ") libmagic=64-bit;;
*) libmagic=never-match;;
esac
lt_cv_deplibs_check_method=pass_all
;;
# This must be glibc/ELF.
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
lt_cv_deplibs_check_method=pass_all
;;
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
fi
;;
newos6*)
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
lt_cv_file_magic_cmd=$FILECMD
lt_cv_file_magic_test_file=/usr/lib/libnls.so
;;
*nto* | *qnx*)
lt_cv_deplibs_check_method=pass_all
;;
openbsd* | bitrig*)
if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
fi
;;
osf3* | osf4* | osf5*)
lt_cv_deplibs_check_method=pass_all
;;
rdos*)
lt_cv_deplibs_check_method=pass_all
;;
solaris*)
lt_cv_deplibs_check_method=pass_all
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
lt_cv_deplibs_check_method=pass_all
;;
sysv4 | sysv4.3*)
case $host_vendor in
motorola)
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
;;
ncr)
lt_cv_deplibs_check_method=pass_all
;;
sequent)
lt_cv_file_magic_cmd='/bin/file'
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
;;
sni)
lt_cv_file_magic_cmd='/bin/file'
lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
lt_cv_file_magic_test_file=/lib/libc.so
;;
siemens)
lt_cv_deplibs_check_method=pass_all
;;
pc)
lt_cv_deplibs_check_method=pass_all
;;
esac
;;
tpf*)
lt_cv_deplibs_check_method=pass_all
;;
os2*)
lt_cv_deplibs_check_method=pass_all
;;
esac
])
file_magic_glob=
want_nocaseglob=no
if test "$build" = "$host"; then
case $host_os in
mingw* | pw32*)
if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
want_nocaseglob=yes
else
file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
fi
;;
esac
fi
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown
_LT_DECL([], [deplibs_check_method], [1],
[Method to check whether dependent libraries are shared objects])
_LT_DECL([], [file_magic_cmd], [1],
[Command to use when deplibs_check_method = "file_magic"])
_LT_DECL([], [file_magic_glob], [1],
[How to find potential files when deplibs_check_method = "file_magic"])
_LT_DECL([], [want_nocaseglob], [1],
[Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
])# _LT_CHECK_MAGIC_METHOD
# LT_PATH_NM
# ----------
# find the pathname to a BSD- or MS-compatible name lister
AC_DEFUN([LT_PATH_NM],
[AC_REQUIRE([AC_PROG_CC])dnl
AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
lt_cv_path_NM=$NM
else
lt_nm_to_check=${ac_tool_prefix}nm
if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
lt_nm_to_check="$lt_nm_to_check nm"
fi
for lt_tmp_nm in $lt_nm_to_check; do
lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
tmp_nm=$ac_dir/$lt_tmp_nm
if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the 'sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
# MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
case $build_os in
mingw*) lt_bad_file=conftest.nm/nofile ;;
*) lt_bad_file=/dev/null ;;
esac
case `"$tmp_nm" -B $lt_bad_file 2>&1 | $SED '1q'` in
*$lt_bad_file* | *'Invalid file or object type'*)
lt_cv_path_NM="$tmp_nm -B"
break 2
;;
*)
case `"$tmp_nm" -p /dev/null 2>&1 | $SED '1q'` in
*/dev/null*)
lt_cv_path_NM="$tmp_nm -p"
break 2
;;
*)
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
;;
esac
;;
esac
fi
done
IFS=$lt_save_ifs
done
: ${lt_cv_path_NM=no}
fi])
if test no != "$lt_cv_path_NM"; then
NM=$lt_cv_path_NM
else
# Didn't find any BSD compatible name lister, look for dumpbin.
if test -n "$DUMPBIN"; then :
# Let the user override the test.
else
AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
case `$DUMPBIN -symbols -headers /dev/null 2>&1 | $SED '1q'` in
*COFF*)
DUMPBIN="$DUMPBIN -symbols -headers"
;;
*)
DUMPBIN=:
;;
esac
fi
AC_SUBST([DUMPBIN])
if test : != "$DUMPBIN"; then
NM=$DUMPBIN
fi
fi
test -z "$NM" && NM=nm
AC_SUBST([NM])
_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
[lt_cv_nm_interface="BSD nm"
echo "int some_variable = 0;" > conftest.$ac_ext
(eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$ac_compile" 2>conftest.err)
cat conftest.err >&AS_MESSAGE_LOG_FD
(eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
(eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
cat conftest.err >&AS_MESSAGE_LOG_FD
(eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
cat conftest.out >&AS_MESSAGE_LOG_FD
if $GREP 'External.*some_variable' conftest.out > /dev/null; then
lt_cv_nm_interface="MS dumpbin"
fi
rm -f conftest*])
])# LT_PATH_NM
# Old names:
AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AM_PROG_NM], [])
dnl AC_DEFUN([AC_PROG_NM], [])
# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
# --------------------------------
# how to determine the name of the shared library
# associated with a specific link library.
# -- PORTME fill in with the dynamic library characteristics
m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
[m4_require([_LT_DECL_EGREP])
m4_require([_LT_DECL_OBJDUMP])
m4_require([_LT_DECL_DLLTOOL])
AC_CACHE_CHECK([how to associate runtime and link libraries],
lt_cv_sharedlib_from_linklib_cmd,
[lt_cv_sharedlib_from_linklib_cmd='unknown'
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
# two different shell functions defined in ltmain.sh;
# decide which one to use based on capabilities of $DLLTOOL
case `$DLLTOOL --help 2>&1` in
*--identify-strict*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
;;
*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
;;
esac
;;
*)
# fallback: assume linklib IS sharedlib
lt_cv_sharedlib_from_linklib_cmd=$ECHO
;;
esac
])
sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
[Command to associate shared and link libraries])
])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
# _LT_PATH_MANIFEST_TOOL
# ----------------------
# locate the manifest tool
m4_defun([_LT_PATH_MANIFEST_TOOL],
[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
[lt_cv_path_mainfest_tool=no
echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
$MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
cat conftest.err >&AS_MESSAGE_LOG_FD
if $GREP 'Manifest Tool' conftest.out > /dev/null; then
lt_cv_path_mainfest_tool=yes
fi
rm -f conftest*])
if test yes != "$lt_cv_path_mainfest_tool"; then
MANIFEST_TOOL=:
fi
_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
])# _LT_PATH_MANIFEST_TOOL
# _LT_DLL_DEF_P([FILE])
# ---------------------
# True iff FILE is a Windows DLL '.def' file.
# Keep in sync with func_dll_def_p in the libtool script
AC_DEFUN([_LT_DLL_DEF_P],
[dnl
test DEF = "`$SED -n dnl
-e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace
-e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments
-e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl
-e q dnl Only consider the first "real" line
$1`" dnl
])# _LT_DLL_DEF_P
# LT_LIB_M
# --------
# check for math library
AC_DEFUN([LT_LIB_M],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case $host in
*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
# These system don't have libm, or don't need it
;;
*-ncr-sysv4.3*)
AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw)
AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
;;
*)
AC_CHECK_LIB(m, cos, LIBM=-lm)
;;
esac
AC_SUBST([LIBM])
])# LT_LIB_M
# Old name:
AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_CHECK_LIBM], [])
# _LT_COMPILER_NO_RTTI([TAGNAME])
# -------------------------------
m4_defun([_LT_COMPILER_NO_RTTI],
[m4_require([_LT_TAG_COMPILER])dnl
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
if test yes = "$GCC"; then
case $cc_basename in
nvcc*)
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
*)
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
esac
_LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
lt_cv_prog_compiler_rtti_exceptions,
[-fno-rtti -fno-exceptions], [],
[_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
fi
_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
[Compiler flag to turn off builtin functions])
])# _LT_COMPILER_NO_RTTI
# _LT_CMD_GLOBAL_SYMBOLS
# ----------------------
m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([LT_PATH_NM])dnl
AC_REQUIRE([LT_PATH_LD])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_TAG_COMPILER])dnl
# Check for command to grab the raw symbol name followed by C symbol from nm.
AC_MSG_CHECKING([command to parse $NM output from $compiler object])
AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
[
# These are sane defaults that work on at least a few old systems.
# [They come from Ultrix. What could be older than Ultrix?!! ;)]
# Character class describing NM global symbol codes.
symcode='[[BCDEGRST]]'
# Regexp to match symbols that can be accessed directly from C.
sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
# Define system-specific variables.
case $host_os in
aix*)
symcode='[[BCDT]]'
;;
cygwin* | mingw* | pw32* | cegcc*)
symcode='[[ABCDGISTW]]'
;;
hpux*)
if test ia64 = "$host_cpu"; then
symcode='[[ABCDEGRST]]'
fi
;;
irix* | nonstopux*)
symcode='[[BCDEGRST]]'
;;
osf*)
symcode='[[BCDEGQRST]]'
;;
solaris*)
symcode='[[BDRT]]'
;;
sco3.2v5*)
symcode='[[DT]]'
;;
sysv4.2uw2*)
symcode='[[DT]]'
;;
sysv5* | sco5v6* | unixware* | OpenUNIX*)
symcode='[[ABDT]]'
;;
sysv4)
symcode='[[DFNSTU]]'
;;
esac
# If we're using GNU nm, then use its standard symbol codes.
case `$NM -V 2>&1` in
*GNU* | *'with BFD'*)
symcode='[[ABCDGIRSTW]]' ;;
esac
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
# Gets list of data symbols to import.
lt_cv_sys_global_symbol_to_import="$SED -n -e 's/^I .* \(.*\)$/\1/p'"
# Adjust the below global symbol transforms to fixup imported variables.
lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
lt_c_name_lib_hook="\
-e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
-e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
else
# Disable hooks by default.
lt_cv_sys_global_symbol_to_import=
lt_cdecl_hook=
lt_c_name_hook=
lt_c_name_lib_hook=
fi
# Transform an extracted symbol line into a proper C declaration.
# Some systems (esp. on ia64) link data and code symbols differently,
# so use this general approach.
lt_cv_sys_global_symbol_to_cdecl="$SED -n"\
$lt_cdecl_hook\
" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
lt_cv_sys_global_symbol_to_c_name_address="$SED -n"\
$lt_c_name_hook\
" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
# Transform an extracted symbol line into symbol name with lib prefix and
# symbol address.
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="$SED -n"\
$lt_c_name_lib_hook\
" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
# Handle CRLF in mingw tool chain
opt_cr=
case $build_os in
mingw*)
opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
;;
esac
# Try without a prefix underscore, then with it.
for ac_symprfx in "" "_"; do
# Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
symxfrm="\\1 $ac_symprfx\\2 \\2"
# Write the raw and C identifiers.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
# Fake it for dumpbin and say T for any non-static function,
# D for any global variable and I for any imported variable.
# Also find C++ and __fastcall symbols from MSVC++ or ICC,
# which start with @ or ?.
lt_cv_sys_global_symbol_pipe="$AWK ['"\
" {last_section=section; section=\$ 3};"\
" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
" \$ 0!~/External *\|/{next};"\
" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
" {if(hide[section]) next};"\
" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
" ' prfx=^$ac_symprfx]"
else
lt_cv_sys_global_symbol_pipe="$SED -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
fi
lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | $SED '/ __gnu_lto/d'"
# Check to see that the pipe works correctly.
pipe_works=no
rm -f conftest*
cat > conftest.$ac_ext <<_LT_EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(void);
void nm_test_func(void){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
_LT_EOF
if AC_TRY_EVAL(ac_compile); then
# Now try to grab the symbols.
nlist=conftest.nm
if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
# Try sorting and uniquifying the output.
if sort "$nlist" | uniq > "$nlist"T; then
mv -f "$nlist"T "$nlist"
else
rm -f "$nlist"T
fi
# Make sure that we snagged all the symbols we need.
if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT@&t@_DLSYM_CONST
#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT@&t@_DLSYM_CONST
#else
# define LT@&t@_DLSYM_CONST const
#endif
#ifdef __cplusplus
extern "C" {
#endif
_LT_EOF
# Now generate the symbol file.
eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
cat <<_LT_EOF >> conftest.$ac_ext
/* The mapping between symbol names and symbols. */
LT@&t@_DLSYM_CONST struct {
const char *name;
void *address;
}
lt__PROGRAM__LTX_preloaded_symbols[[]] =
{
{ "@PROGRAM@", (void *) 0 },
_LT_EOF
$SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
cat <<\_LT_EOF >> conftest.$ac_ext
{0, (void *) 0}
};
/* This works around a problem in FreeBSD linker */
#ifdef FREEBSD_WORKAROUND
static const void *lt_preloaded_setup() {
return lt__PROGRAM__LTX_preloaded_symbols;
}
#endif
#ifdef __cplusplus
}
#endif
_LT_EOF
# Now try linking the two files.
mv conftest.$ac_objext conftstm.$ac_objext
lt_globsym_save_LIBS=$LIBS
lt_globsym_save_CFLAGS=$CFLAGS
LIBS=conftstm.$ac_objext
CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
pipe_works=yes
fi
LIBS=$lt_globsym_save_LIBS
CFLAGS=$lt_globsym_save_CFLAGS
else
echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
fi
else
echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
fi
else
echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
fi
else
echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
cat conftest.$ac_ext >&5
fi
rm -rf conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
if test yes = "$pipe_works"; then
break
else
lt_cv_sys_global_symbol_pipe=
fi
done
])
if test -z "$lt_cv_sys_global_symbol_pipe"; then
lt_cv_sys_global_symbol_to_cdecl=
fi
if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
AC_MSG_RESULT(failed)
else
AC_MSG_RESULT(ok)
fi
# Response file support.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
nm_file_list_spec='@'
elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
nm_file_list_spec='@'
fi
_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
[Take the output of nm and produce a listing of raw symbols and C names])
_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
[Transform the output of nm in a proper C declaration])
_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1],
[Transform the output of nm into a list of symbols to manually relocate])
_LT_DECL([global_symbol_to_c_name_address],
[lt_cv_sys_global_symbol_to_c_name_address], [1],
[Transform the output of nm in a C name address pair])
_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
[lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
[Transform the output of nm in a C name address pair when lib prefix is needed])
_LT_DECL([nm_interface], [lt_cv_nm_interface], [1],
[The name lister interface])
_LT_DECL([], [nm_file_list_spec], [1],
[Specify filename containing input files for $NM])
]) # _LT_CMD_GLOBAL_SYMBOLS
# _LT_COMPILER_PIC([TAGNAME])
# ---------------------------
m4_defun([_LT_COMPILER_PIC],
[m4_require([_LT_TAG_COMPILER])dnl
_LT_TAGVAR(lt_prog_compiler_wl, $1)=
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)=
m4_if([$1], [CXX], [
# C++ specific cases for pic, static, wl, etc.
if test yes = "$GXX"; then
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
# All AIX code is PIC.
if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
# adding the '-m68020' flag to GCC prevents building anything better,
# like '-m68040'.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
esac
;;
beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
mingw* | cygwin* | os2* | pw32* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
# Although the cygwin gcc ignores -fPIC, still need this for old-style
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
case $host_os in
os2*)
_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
;;
esac
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
;;
*djgpp*)
# DJGPP does not support shared libraries at all
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
;;
haiku*)
# PIC is the default for Haiku.
# The "-static" flag exists, but is broken.
_LT_TAGVAR(lt_prog_compiler_static, $1)=
;;
interix[[3-9]]*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
;;
sysv4*MP*)
if test -d /usr/nec; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
fi
;;
hpux*)
# PIC is the default for 64-bit PA HP-UX, but not for 32-bit
# PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
# sets the default TLS model and affects inlining.
case $host_cpu in
hppa*64*)
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
;;
*qnx* | *nto*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
# it will coredump.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
else
case $host_os in
aix[[4-9]]*)
# All AIX code is PIC.
if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
fi
;;
chorus*)
case $cc_basename in
cxch68*)
# Green Hills C++ Compiler
# _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
;;
esac
;;
mingw* | cygwin* | os2* | pw32* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
;;
dgux*)
case $cc_basename in
ec++*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
;;
ghcx*)
# Green Hills C++ Compiler
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
*)
;;
esac
;;
freebsd* | dragonfly* | midnightbsd*)
# FreeBSD uses GNU C++
;;
hpux9* | hpux10* | hpux11*)
case $cc_basename in
CC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
if test ia64 != "$host_cpu"; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
fi
;;
aCC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
;;
esac
;;
*)
;;
esac
;;
interix*)
# This is c89, which is MS Visual C++ (no shared libs)
# Anyone wants to do a port?
;;
irix5* | irix6* | nonstopux*)
case $cc_basename in
CC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
# CC pic flag -KPIC is the default.
;;
*)
;;
esac
;;
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
KCC*)
# KAI C++ Compiler
_LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
ecpc* )
# old Intel C++ for x86_64, which still supported -KPIC.
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
icpc* )
# Intel C++, used to be incompatible with GCC.
# ICC 10 doesn't accept -KPIC any more.
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
pgCC* | pgcpp*)
# Portland Group C++ compiler
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
cxx*)
# Compaq C++
# Make sure the PIC flag is empty. It appears that all Alpha
# Linux and Compaq Tru64 Unix objects are PIC.
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
# IBM XL 8.0, 9.0 on PPC and BlueGene
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
;;
*)
case `$CC -V 2>&1 | $SED 5q` in
*Sun\ C*)
# Sun C++ 5.9
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
;;
esac
;;
esac
;;
lynxos*)
;;
m88k*)
;;
mvs*)
case $cc_basename in
cxx*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
;;
*)
;;
esac
;;
netbsd*)
;;
*qnx* | *nto*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
# it will coredump.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
;;
osf3* | osf4* | osf5*)
case $cc_basename in
KCC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
;;
RCC*)
# Rational C++ 2.4.1
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
cxx*)
# Digital/Compaq C++
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# Make sure the PIC flag is empty. It appears that all Alpha
# Linux and Compaq Tru64 Unix objects are PIC.
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
*)
;;
esac
;;
psos*)
;;
solaris*)
case $cc_basename in
CC* | sunCC*)
# Sun C++ 4.2, 5.x and Centerline C++
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
;;
gcx*)
# Green Hills C++ Compiler
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
;;
*)
;;
esac
;;
sunos4*)
case $cc_basename in
CC*)
# Sun C++ 4.x
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
lcc*)
# Lucid
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
*)
;;
esac
;;
sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
case $cc_basename in
CC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
esac
;;
tandem*)
case $cc_basename in
NCC*)
# NonStop-UX NCC 3.20
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
;;
*)
;;
esac
;;
vxworks*)
;;
*)
_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
;;
esac
fi
],
[
if test yes = "$GCC"; then
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
# All AIX code is PIC.
if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
# adding the '-m68020' flag to GCC prevents building anything better,
# like '-m68040'.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
esac
;;
beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
# Although the cygwin gcc ignores -fPIC, still need this for old-style
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
case $host_os in
os2*)
_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
;;
esac
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
;;
haiku*)
# PIC is the default for Haiku.
# The "-static" flag exists, but is broken.
_LT_TAGVAR(lt_prog_compiler_static, $1)=
;;
hpux*)
# PIC is the default for 64-bit PA HP-UX, but not for 32-bit
# PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
# sets the default TLS model and affects inlining.
case $host_cpu in
hppa*64*)
# +Z the default
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
;;
interix[[3-9]]*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
;;
msdosdjgpp*)
# Just because we use GCC doesn't mean we suddenly get shared libraries
# on systems that don't support them.
_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
enable_shared=no
;;
*nto* | *qnx*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
# it will coredump.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
;;
sysv4*MP*)
if test -d /usr/nec; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
fi
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
case $cc_basename in
nvcc*) # Cuda Compiler Driver 2.2
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
fi
;;
esac
else
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
aix*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
fi
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
case $cc_basename in
nagfor*)
# NAG Fortran compiler
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
esac
;;
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
case $host_os in
os2*)
_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
;;
esac
;;
hpux9* | hpux10* | hpux11*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# PIC (with -KPIC) is the default.
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
# old Intel for x86_64, which still supported -KPIC.
ecc*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
# icc used to be incompatible with GCC.
# ICC 10 doesn't accept -KPIC any more.
icc* | ifort*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
# Lahey Fortran 8.1.
lf95*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
;;
nagfor*)
# NAG Fortran compiler
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
tcc*)
# Fabrice Bellard et al's Tiny C Compiler
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
ccc*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# All Alpha code is PIC.
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
xl* | bgxl* | bgf* | mpixl*)
# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
;;
*)
case `$CC -V 2>&1 | $SED 5q` in
*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
# Sun Fortran 8.3 passes all unrecognized flags to the linker
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)=''
;;
*Sun\ F* | *Sun*Fortran*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
;;
*Sun\ C*)
# Sun C 5.9
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
;;
*Intel*\ [[CF]]*Compiler*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
*Portland\ Group*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
esac
;;
esac
;;
newsos6)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
*nto* | *qnx*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
# it will coredump.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
;;
osf3* | osf4* | osf5*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# All OSF/1 code is PIC.
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
rdos*)
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
solaris*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
case $cc_basename in
f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
esac
;;
sunos4*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
sysv4 | sysv4.2uw2* | sysv4.3*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
sysv4*MP*)
if test -d /usr/nec; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
;;
sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
unicos*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
;;
uts4*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
*)
_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
;;
esac
fi
])
case $host_os in
# For platforms that do not support PIC, -DPIC is meaningless:
*djgpp*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
;;
esac
AC_CACHE_CHECK([for $compiler option to produce PIC],
[_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
[_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
#
# Check to make sure the PIC flag actually works.
#
if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
_LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
[_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
[$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
[case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
"" | " "*) ;;
*) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
esac],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
fi
_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
[Additional compiler flags for building library objects])
_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
[How to pass a linker flag through the compiler])
#
# Check to make sure the static flag actually works.
#
wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
_LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
$lt_tmp_static_flag,
[],
[_LT_TAGVAR(lt_prog_compiler_static, $1)=])
_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
[Compiler flag to prevent dynamic linking])
])# _LT_COMPILER_PIC
# _LT_LINKER_SHLIBS([TAGNAME])
# ----------------------------
# See if the linker supports building shared libraries.
m4_defun([_LT_LINKER_SHLIBS],
[AC_REQUIRE([LT_PATH_LD])dnl
AC_REQUIRE([LT_PATH_NM])dnl
m4_require([_LT_PATH_MANIFEST_TOOL])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
m4_require([_LT_TAG_COMPILER])dnl
AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
m4_if([$1], [CXX], [
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
_LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
case $host_os in
aix[[4-9]]*)
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to GNU nm, but means don't demangle to AIX nm.
# Without the "-l" option, or with the "-B" option, AIX nm treats
# weak defined symbols like other global defined symbols, whereas
# GNU nm marks them as "W".
# While the 'weak' keyword is ignored in the Export File, we need
# it in the Import File for the 'aix-soname' feature, so we have
# to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
_LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
_LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
_LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds
;;
cygwin* | mingw* | cegcc*)
case $cc_basename in
cl* | icl*)
_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
;;
*)
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
_LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
;;
esac
;;
*)
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
;;
esac
], [
runpath_var=
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_cmds, $1)=
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(compiler_needs_object, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(old_archive_from_new_cmds, $1)=
_LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
_LT_TAGVAR(thread_safe_flag_spec, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
_LT_TAGVAR(include_expsyms, $1)=
# exclude_expsyms can be an extended regexp of symbols to exclude
# it will be wrapped by ' (' and ')$', so one must not match beginning or
# end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
# as well as any symbol that contains 'd'.
_LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced. Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
# Exclude shared library initialization/finalization symbols.
dnl Note also adjust exclude_expsyms for C++ above.
extract_expsyms_cmds=
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
# FIXME: the MSVC++ and ICC port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++ or Intel C++ Compiler.
if test yes != "$GCC"; then
with_gnu_ld=no
fi
;;
interix*)
# we just hope/assume this is gcc and not c89 (= MSVC++ or ICC)
with_gnu_ld=yes
;;
openbsd* | bitrig*)
with_gnu_ld=no
;;
esac
_LT_TAGVAR(ld_shlibs, $1)=yes
# On some targets, GNU ld is compatible enough with the native linker
# that we're better off using the native interface for both.
lt_use_gnu_ld_interface=no
if test yes = "$with_gnu_ld"; then
case $host_os in
aix*)
# The AIX port of GNU ld has always aspired to compatibility
# with the native linker. However, as the warning in the GNU ld
# block says, versions before 2.19.5* couldn't really create working
# shared libraries, regardless of the interface used.
case `$LD -v 2>&1` in
*\ \(GNU\ Binutils\)\ 2.19.5*) ;;
*\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
*\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
*)
lt_use_gnu_ld_interface=yes
;;
esac
;;
*)
lt_use_gnu_ld_interface=yes
;;
esac
fi
if test yes = "$lt_use_gnu_ld_interface"; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='$wl'
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
_LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
supports_anon_versioning=no
case `$LD -v | $SED -e 's/([[^)]]\+)\s\+//' 2>&1` in
*GNU\ gold*) supports_anon_versioning=yes ;;
*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
# See if GNU ld supports shared libraries.
case $host_os in
aix[[3-9]]*)
# On AIX/PPC, the GNU linker is very broken
if test ia64 != "$host_cpu"; then
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
*** Warning: the GNU linker, at least up to release 2.19, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
*** really care for shared libraries, you may want to install binutils
*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
*** You will then need to restart the configuration process.
_LT_EOF
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)=''
;;
m68k)
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
;;
esac
;;
beos*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
cygwin* | mingw* | pw32* | cegcc*)
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
_LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
# If the export-symbols file already is a .def file, use it as
# is; otherwise, prepend EXPORTS...
_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
cp $export_symbols $output_objdir/$soname.def;
else
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
haiku*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
os2*)
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
shrext_cmds=.dll
_LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
$ECHO EXPORTS >> $output_objdir/$libname.def~
emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
emximp -o $lib $output_objdir/$libname.def'
_LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
$ECHO EXPORTS >> $output_objdir/$libname.def~
prefix_cmds="$SED"~
if test EXPORTS = "`$SED 1q $export_symbols`"; then
prefix_cmds="$prefix_cmds -e 1d";
fi~
prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
emximp -o $lib $output_objdir/$libname.def'
_LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
_LT_TAGVAR(file_list_spec, $1)='@'
;;
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
tmp_diet=no
if test linux-dietlibc = "$host_os"; then
case $cc_basename in
diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
esac
fi
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
&& test no = "$tmp_diet"
then
tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group f77 and f90 compilers
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
tmp_addflag=' -i_dynamic -nofor_main' ;;
ifc* | ifort*) # Intel Fortran compiler
tmp_addflag=' -nofor_main' ;;
lf95*) # Lahey Fortran 8.1
_LT_TAGVAR(whole_archive_flag_spec, $1)=
tmp_sharedflag='--shared' ;;
nagfor*) # NAGFOR 5.3
tmp_sharedflag='-Wl,-shared' ;;
xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
nvcc*) # Cuda Compiler Driver 2.2
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
;;
esac
case `$CC -V 2>&1 | $SED 5q` in
*Sun\ C*) # Sun C 5.9
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
tmp_sharedflag='-G' ;;
esac
_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
echo "local: *; };" >> $output_objdir/$libname.ver~
$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
case $cc_basename in
tcc*)
_LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic'
;;
xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
_LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
echo "local: *; };" >> $output_objdir/$libname.ver~
$LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
solaris*)
if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer. Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
case `$LD -v 2>&1` in
*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
*** reliably create shared libraries on SCO systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
_LT_EOF
;;
*)
# For security reasons, it is highly recommended that you always
# use absolute paths for naming shared libraries, and exclude the
# DT_RUNPATH tag from executables and libraries. But doing so
# requires that you compile everything twice, which is a pain.
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
sunos4*)
_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
wlarc=
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then
runpath_var=
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
case $host_os in
aix3*)
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=yes
_LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
_LT_TAGVAR(hardcode_direct, $1)=unsupported
fi
;;
aix[[4-9]]*)
if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
no_entry_flag=
else
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to GNU nm, but means don't demangle to AIX nm.
# Without the "-l" option, or with the "-B" option, AIX nm treats
# weak defined symbols like other global defined symbols, whereas
# GNU nm marks them as "W".
# While the 'weak' keyword is ignored in the Export File, we need
# it in the Import File for the 'aix-soname' feature, so we have
# to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
_LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
_LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
# have runtime linking enabled, and use it for executables.
# For shared libraries, we enable/disable runtime linking
# depending on the kind of the shared library created -
# when "with_aix_soname,aix_use_runtimelinking" is:
# "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
# "aix,yes" lib.so shared, rtl:yes, for executables
# lib.a static archive
# "both,no" lib.so.V(shr.o) shared, rtl:yes
# lib.a(lib.so.V) shared, rtl:no, for executables
# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
# lib.a(lib.so.V) shared, rtl:no
# "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
# lib.a static archive
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
aix_use_runtimelinking=yes
break
fi
done
if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
# With aix-soname=svr4, we create the lib.so.V shared archives only,
# so we don't have lib.a shared libs to link our executables.
# We have to force runtime linking in this case.
aix_use_runtimelinking=yes
LDFLAGS="$LDFLAGS -Wl,-brtl"
fi
;;
esac
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
# When large executables or shared objects are built, AIX ld can
# have problems creating the table of contents. If linking a library
# or program results in "error TOC overflow" add -mminimal-toc to
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
_LT_TAGVAR(archive_cmds, $1)=''
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(file_list_spec, $1)='$wl-f,'
case $with_aix_soname,$aix_use_runtimelinking in
aix,*) ;; # traditional, no import file
svr4,* | *,yes) # use import file
# The Import File defines what to hardcode.
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
;;
esac
if test yes = "$GCC"; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
# We have reworked collect2
:
else
# We have old collect2
_LT_TAGVAR(hardcode_direct, $1)=unsupported
# It fails to find uninstalled libraries when the uninstalled
# path is not listed in the libpath. Setting hardcode_minus_L
# to unsupported forces relinking
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=
fi
;;
esac
shared_flag='-shared'
if test yes = "$aix_use_runtimelinking"; then
shared_flag="$shared_flag "'$wl-G'
fi
# Need to ensure runtime linking is disabled for the traditional
# shared library, or the linker may eventually find shared libraries
# /with/ Import File - we do not want to mix them.
shared_flag_aix='-shared'
shared_flag_svr4='-shared $wl-G'
else
# not using gcc
if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
if test yes = "$aix_use_runtimelinking"; then
shared_flag='$wl-G'
else
shared_flag='$wl-bM:SRE'
fi
shared_flag_aix='$wl-bM:SRE'
shared_flag_svr4='$wl-G'
fi
fi
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to export.
_LT_TAGVAR(always_export_symbols, $1)=yes
if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
if test ia64 = "$host_cpu"; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
_LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
_LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
_LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
# -brtl affects multiple linker settings, -berok does not and is overridden later
compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
if test svr4 != "$with_aix_soname"; then
# This is similar to how AIX traditionally builds its shared libraries.
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
fi
if test aix != "$with_aix_soname"; then
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
else
# used by -dlpreopen to get the symbols
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
fi
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)=''
;;
m68k)
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
;;
esac
;;
bsdi[[45]]*)
_LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
;;
cygwin* | mingw* | pw32* | cegcc*)
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++ or Intel C++ Compiler.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
case $cc_basename in
cl* | icl*)
# Native MSVC or ICC
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=yes
_LT_TAGVAR(file_list_spec, $1)='@'
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
cp "$export_symbols" "$output_objdir/$soname.def";
echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
else
$SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
fi~
$CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
# Don't use ranlib
_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
lt_tool_outputfile="@TOOL_OUTPUT@"~
case $lt_outputfile in
*.exe|*.EXE) ;;
*)
lt_outputfile=$lt_outputfile.exe
lt_tool_outputfile=$lt_tool_outputfile.exe
;;
esac~
if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
$MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
$RM "$lt_outputfile.manifest";
fi'
;;
*)
# Assume MSVC and ICC wrapper
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
# FIXME: Should let the user specify the lib program.
_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
esac
;;
darwin* | rhapsody*)
_LT_DARWIN_LINKER_FEATURES($1)
;;
dgux*)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
# support. Future versions do this automatically, but an explicit c++rt0.o
# does not break anything, and helps significantly (at the cost of a little
# extra space).
freebsd2.2*)
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
# Unfortunately, older versions of FreeBSD 2 do not have this feature.
freebsd2.*)
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
freebsd* | dragonfly* | midnightbsd*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
hpux9*)
if test yes = "$GCC"; then
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
;;
hpux10*)
if test yes,no = "$GCC,$with_gnu_ld"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
if test no = "$with_gnu_ld"; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
fi
;;
hpux11*)
if test yes,no = "$GCC,$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
case $host_cpu in
hppa*64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
m4_if($1, [], [
# Older versions of the 11.00 compiler do not understand -b yet
# (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
_LT_LINKER_OPTION([if $CC understands -b],
_LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
[_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
[_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
[_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
;;
esac
fi
if test no = "$with_gnu_ld"; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
hppa*64*|ia64*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
;;
esac
fi
;;
irix5* | irix6* | nonstopux*)
if test yes = "$GCC"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
# This should be the same for all languages, so no per-tag cache variable.
AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
[lt_cv_irix_exported_symbol],
[save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
AC_LINK_IFELSE(
[AC_LANG_SOURCE(
[AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
[C++], [[int foo (void) { return 0; }]],
[Fortran 77], [[
subroutine foo
end]],
[Fortran], [[
subroutine foo
end]])])],
[lt_cv_irix_exported_symbol=yes],
[lt_cv_irix_exported_symbol=no])
LDFLAGS=$save_LDFLAGS])
if test yes = "$lt_cv_irix_exported_symbol"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
fi
else
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
linux*)
case $cc_basename in
tcc*)
# Fabrice Bellard et al's Tiny C Compiler
_LT_TAGVAR(ld_shlibs, $1)=yes
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
newsos6)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*nto* | *qnx*)
;;
openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
else
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
fi
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
os2*)
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
shrext_cmds=.dll
_LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
$ECHO EXPORTS >> $output_objdir/$libname.def~
emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
emximp -o $lib $output_objdir/$libname.def'
_LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
$ECHO EXPORTS >> $output_objdir/$libname.def~
prefix_cmds="$SED"~
if test EXPORTS = "`$SED 1q $export_symbols`"; then
prefix_cmds="$prefix_cmds -e 1d";
fi~
prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
emximp -o $lib $output_objdir/$libname.def'
_LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
_LT_TAGVAR(file_list_spec, $1)='@'
;;
osf3*)
if test yes = "$GCC"; then
_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test yes = "$GCC"; then
_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
$CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
;;
solaris*)
_LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
if test yes = "$GCC"; then
wlarc='$wl'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
wlarc=''
_LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
;;
*)
wlarc='$wl'
_LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
;;
esac
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The compiler driver will combine and reorder linker options,
# but understands '-z linker_flag'. GCC discards it without '$wl',
# but is careful enough not to reorder.
# Supported since Solaris 2.6 (maybe 2.5.1?)
if test yes = "$GCC"; then
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
fi
;;
esac
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
sunos4*)
if test sequent = "$host_vendor"; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
sysv4)
case $host_vendor in
sni)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
;;
siemens)
## LD is ld it makes a PLAMLIB
## CC just makes a GrossModule.
_LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
_LT_TAGVAR(hardcode_direct, $1)=no
;;
motorola)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
;;
esac
runpath_var='LD_RUN_PATH'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
sysv4.3*)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
;;
sysv4*MP*)
if test -d /usr/nec; then
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
_LT_TAGVAR(ld_shlibs, $1)=yes
fi
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
_LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
if test yes = "$GCC"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
sysv5* | sco3.2v5* | sco5v6*)
# Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
_LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
runpath_var='LD_RUN_PATH'
if test yes = "$GCC"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
uts4*)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
if test sni = "$host_vendor"; then
case $host in
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym'
;;
esac
fi
fi
])
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
_LT_DECL([], [extract_expsyms_cmds], [2],
[The commands to extract the exported symbol list from a shared archive])
#
# Do we need to explicitly link libc?
#
case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
x|xyes)
# Assume -lc should be added
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
if test yes,yes = "$GCC,$enable_shared"; then
case $_LT_TAGVAR(archive_cmds, $1) in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
;;
'$CC '*)
# Test whether the compiler implicitly links with -lc since on some
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
AC_CACHE_CHECK([whether -lc should be explicitly linked in],
[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
[$RM conftest*
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
soname=conftest
lib=conftest
libobjs=conftest.$ac_objext
deplibs=
wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
compiler_flags=-v
linker_flags=-v
verstring=
output_objdir=.
libname=conftest
lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
_LT_TAGVAR(allow_undefined_flag, $1)=
if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
then
lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
else
lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
fi
_LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
else
cat conftest.err 1>&5
fi
$RM conftest*
])
_LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
;;
esac
fi
;;
esac
_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
[Whether or not to add -lc for building shared libraries])
_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
[enable_shared_with_static_runtimes], [0],
[Whether or not to disallow shared libs when runtime libs are static])
_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
[Compiler flag to allow reflexive dlopens])
_LT_TAGDECL([], [whole_archive_flag_spec], [1],
[Compiler flag to generate shared objects directly from archives])
_LT_TAGDECL([], [compiler_needs_object], [1],
[Whether the compiler copes with passing no objects directly])
_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
[Create an old-style archive from a shared archive])
_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
[Create a temporary old-style archive to link instead of a shared archive])
_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
_LT_TAGDECL([], [archive_expsym_cmds], [2])
_LT_TAGDECL([], [module_cmds], [2],
[Commands used to build a loadable module if different from building
a shared archive.])
_LT_TAGDECL([], [module_expsym_cmds], [2])
_LT_TAGDECL([], [with_gnu_ld], [1],
[Whether we are building with GNU ld or not])
_LT_TAGDECL([], [allow_undefined_flag], [1],
[Flag that allows shared libraries with undefined symbols to be built])
_LT_TAGDECL([], [no_undefined_flag], [1],
[Flag that enforces no undefined symbols])
_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
[Flag to hardcode $libdir into a binary during linking.
This must work even if $libdir does not exist])
_LT_TAGDECL([], [hardcode_libdir_separator], [1],
[Whether we need a single "-rpath" flag with a separated argument])
_LT_TAGDECL([], [hardcode_direct], [0],
[Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
DIR into the resulting binary])
_LT_TAGDECL([], [hardcode_direct_absolute], [0],
[Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
DIR into the resulting binary and the resulting library dependency is
"absolute", i.e impossible to change by setting $shlibpath_var if the
library is relocated])
_LT_TAGDECL([], [hardcode_minus_L], [0],
[Set to "yes" if using the -LDIR flag during linking hardcodes DIR
into the resulting binary])
_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
[Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
into the resulting binary])
_LT_TAGDECL([], [hardcode_automatic], [0],
[Set to "yes" if building a shared library automatically hardcodes DIR
into the library and all subsequent libraries and executables linked
against it])
_LT_TAGDECL([], [inherit_rpath], [0],
[Set to yes if linker adds runtime paths of dependent libraries
to runtime path list])
_LT_TAGDECL([], [link_all_deplibs], [0],
[Whether libtool must link a program against all its dependency libraries])
_LT_TAGDECL([], [always_export_symbols], [0],
[Set to "yes" if exported symbols are required])
_LT_TAGDECL([], [export_symbols_cmds], [2],
[The commands to list exported symbols])
_LT_TAGDECL([], [exclude_expsyms], [1],
[Symbols that should not be listed in the preloaded symbols])
_LT_TAGDECL([], [include_expsyms], [1],
[Symbols that must always be exported])
_LT_TAGDECL([], [prelink_cmds], [2],
[Commands necessary for linking programs (against libraries) with templates])
_LT_TAGDECL([], [postlink_cmds], [2],
[Commands necessary for finishing linking programs])
_LT_TAGDECL([], [file_list_spec], [1],
[Specify filename containing input files])
dnl FIXME: Not yet implemented
dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
dnl [Compiler flag to generate thread safe objects])
])# _LT_LINKER_SHLIBS
# _LT_LANG_C_CONFIG([TAG])
# ------------------------
# Ensure that the configuration variables for a C compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_C_CONFIG],
[m4_require([_LT_DECL_EGREP])dnl
lt_save_CC=$CC
AC_LANG_PUSH(C)
# Source file extension for C test sources.
ac_ext=c
# Object file extension for compiled C test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"
# Code to be used in simple link tests
lt_simple_link_test_code='int main(){return(0);}'
_LT_TAG_COMPILER
# Save the default compiler, since it gets overwritten when the other
# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
compiler_DEFAULT=$CC
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
if test -n "$compiler"; then
_LT_COMPILER_NO_RTTI($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
LT_SYS_DLOPEN_SELF
_LT_CMD_STRIPLIB
# Report what library types will actually be built
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
if test ia64 != "$host_cpu"; then
case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
yes,aix,yes) ;; # shared object as lib.so file only
yes,svr4,*) ;; # shared object as lib.so archive member only
yes,*) enable_static=no ;; # shared object in lib.a archive as well
esac
fi
;;
esac
AC_MSG_RESULT([$enable_shared])
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
_LT_CONFIG($1)
fi
AC_LANG_POP
CC=$lt_save_CC
])# _LT_LANG_C_CONFIG
# _LT_LANG_CXX_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a C++ compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_CXX_CONFIG],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_PATH_MANIFEST_TOOL])dnl
if test -n "$CXX" && ( test no != "$CXX" &&
( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
(test g++ != "$CXX"))); then
AC_PROG_CXXCPP
else
_lt_caught_CXX_error=yes
fi
AC_LANG_PUSH(C++)
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(compiler_needs_object, $1)=no
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
# Source file extension for C++ test sources.
ac_ext=cpp
# Object file extension for compiled C++ test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# No sense in running all these tests if we already determined that
# the CXX compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
if test yes != "$_lt_caught_CXX_error"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"
# Code to be used in simple link tests
lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_LD=$LD
lt_save_GCC=$GCC
GCC=$GXX
lt_save_with_gnu_ld=$with_gnu_ld
lt_save_path_LD=$lt_cv_path_LD
if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
else
$as_unset lt_cv_prog_gnu_ld
fi
if test -n "${lt_cv_path_LDCXX+set}"; then
lt_cv_path_LD=$lt_cv_path_LDCXX
else
$as_unset lt_cv_path_LD
fi
test -z "${LDCXX+set}" || LD=$LDCXX
CC=${CXX-"c++"}
CFLAGS=$CXXFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
if test -n "$compiler"; then
# We don't want -fno-exception when compiling C++ code, so set the
# no_builtin_flag separately
if test yes = "$GXX"; then
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
else
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
fi
if test yes = "$GXX"; then
# Set up default GNU C++ configuration
LT_PATH_LD
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
if test yes = "$with_gnu_ld"; then
_LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# If archive_cmds runs LD, not CC, wlarc should be empty
# XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
# investigate it a little bit more. (MM)
wlarc='$wl'
# ancient GNU ld didn't support --whole-archive et. al.
if eval "`$CC -print-prog-name=ld` --help 2>&1" |
$GREP 'no-whole-archive' > /dev/null; then
_LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
else
with_gnu_ld=no
wlarc=
# A generic and very simple default shared library creation
# command for GNU C++ for the case where it uses the native
# linker, instead of GNU ld. If possible, this setting should
# overridden to take advantage of the native linker features on
# the platform it is being used on.
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
fi
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
GXX=no
with_gnu_ld=no
wlarc=
fi
# PORTME: fill in a description of your system's C++ link characteristics
AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
_LT_TAGVAR(ld_shlibs, $1)=yes
case $host_os in
aix3*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aix[[4-9]]*)
if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
no_entry_flag=
else
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
# have runtime linking enabled, and use it for executables.
# For shared libraries, we enable/disable runtime linking
# depending on the kind of the shared library created -
# when "with_aix_soname,aix_use_runtimelinking" is:
# "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
# "aix,yes" lib.so shared, rtl:yes, for executables
# lib.a static archive
# "both,no" lib.so.V(shr.o) shared, rtl:yes
# lib.a(lib.so.V) shared, rtl:no, for executables
# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
# lib.a(lib.so.V) shared, rtl:no
# "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
# lib.a static archive
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
case $ld_flag in
*-brtl*)
aix_use_runtimelinking=yes
break
;;
esac
done
if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
# With aix-soname=svr4, we create the lib.so.V shared archives only,
# so we don't have lib.a shared libs to link our executables.
# We have to force runtime linking in this case.
aix_use_runtimelinking=yes
LDFLAGS="$LDFLAGS -Wl,-brtl"
fi
;;
esac
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
# When large executables or shared objects are built, AIX ld can
# have problems creating the table of contents. If linking a library
# or program results in "error TOC overflow" add -mminimal-toc to
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
_LT_TAGVAR(archive_cmds, $1)=''
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(file_list_spec, $1)='$wl-f,'
case $with_aix_soname,$aix_use_runtimelinking in
aix,*) ;; # no import file
svr4,* | *,yes) # use import file
# The Import File defines what to hardcode.
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
;;
esac
if test yes = "$GXX"; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
# We have reworked collect2
:
else
# We have old collect2
_LT_TAGVAR(hardcode_direct, $1)=unsupported
# It fails to find uninstalled libraries when the uninstalled
# path is not listed in the libpath. Setting hardcode_minus_L
# to unsupported forces relinking
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=
fi
esac
shared_flag='-shared'
if test yes = "$aix_use_runtimelinking"; then
shared_flag=$shared_flag' $wl-G'
fi
# Need to ensure runtime linking is disabled for the traditional
# shared library, or the linker may eventually find shared libraries
# /with/ Import File - we do not want to mix them.
shared_flag_aix='-shared'
shared_flag_svr4='-shared $wl-G'
else
# not using gcc
if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
if test yes = "$aix_use_runtimelinking"; then
shared_flag='$wl-G'
else
shared_flag='$wl-bM:SRE'
fi
shared_flag_aix='$wl-bM:SRE'
shared_flag_svr4='$wl-G'
fi
fi
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to
# export.
_LT_TAGVAR(always_export_symbols, $1)=yes
if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
# The "-G" linker flag allows undefined symbols.
_LT_TAGVAR(no_undefined_flag, $1)='-bernotok'
# Determine the default libpath from the value encoded in an empty
# executable.
_LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
if test ia64 = "$host_cpu"; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
_LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
_LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
_LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
# -brtl affects multiple linker settings, -berok does not and is overridden later
compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
if test svr4 != "$with_aix_soname"; then
# This is similar to how AIX traditionally builds its shared
# libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
fi
if test aix != "$with_aix_soname"; then
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
else
# used by -dlpreopen to get the symbols
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
fi
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
beos*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
chorus*)
case $cc_basename in
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
;;
cygwin* | mingw* | pw32* | cegcc*)
case $GXX,$cc_basename in
,cl* | no,cl* | ,icl* | no,icl*)
# Native MSVC or ICC
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=yes
_LT_TAGVAR(file_list_spec, $1)='@'
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
cp "$export_symbols" "$output_objdir/$soname.def";
echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
else
$SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
fi~
$CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
# Don't use ranlib
_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
lt_tool_outputfile="@TOOL_OUTPUT@"~
case $lt_outputfile in
*.exe|*.EXE) ;;
*)
lt_outputfile=$lt_outputfile.exe
lt_tool_outputfile=$lt_tool_outputfile.exe
;;
esac~
func_to_tool_file "$lt_outputfile"~
if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
$MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
$RM "$lt_outputfile.manifest";
fi'
;;
*)
# g++
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
# If the export-symbols file already is a .def file, use it as
# is; otherwise, prepend EXPORTS...
_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
cp $export_symbols $output_objdir/$soname.def;
else
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
$CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
darwin* | rhapsody*)
_LT_DARWIN_LINKER_FEATURES($1)
;;
os2*)
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
shrext_cmds=.dll
_LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
$ECHO EXPORTS >> $output_objdir/$libname.def~
emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
emximp -o $lib $output_objdir/$libname.def'
_LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
$ECHO EXPORTS >> $output_objdir/$libname.def~
prefix_cmds="$SED"~
if test EXPORTS = "`$SED 1q $export_symbols`"; then
prefix_cmds="$prefix_cmds -e 1d";
fi~
prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
emximp -o $lib $output_objdir/$libname.def'
_LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
_LT_TAGVAR(file_list_spec, $1)='@'
;;
dgux*)
case $cc_basename in
ec++*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
ghcx*)
# Green Hills C++ Compiler
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
;;
freebsd2.*)
# C++ shared libraries reported to be fairly broken before
# switch to ELF
_LT_TAGVAR(ld_shlibs, $1)=no
;;
freebsd-elf*)
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
;;
freebsd* | dragonfly* | midnightbsd*)
# FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
# conventions
_LT_TAGVAR(ld_shlibs, $1)=yes
;;
haiku*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
hpux9*)
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
# but as the default
# location of the library.
case $cc_basename in
CC*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aCC*)
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
if test yes = "$GXX"; then
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
hpux10*|hpux11*)
if test no = "$with_gnu_ld"; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
hppa*64*|ia64*)
;;
*)
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
;;
esac
fi
case $host_cpu in
hppa*64*|ia64*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
# but as the default
# location of the library.
;;
esac
case $cc_basename in
CC*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aCC*)
case $host_cpu in
hppa*64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
if test yes = "$GXX"; then
if test no = "$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
fi
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
irix5* | irix6*)
case $cc_basename in
CC*)
# SGI C++
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
# necessary to make sure instantiated templates are included
# in the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
;;
*)
if test yes = "$GXX"; then
if test no = "$with_gnu_ld"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
fi
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
esac
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
;;
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
_LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# Archives containing C++ object files must be created using
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
_LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
;;
icpc* | ecpc* )
# Intel C++
with_gnu_ld=yes
# version 8.0 and above of icpc choke on multiply defined symbols
# if we add $predep_objects and $postdep_objects, however 7.1 and
# earlier do not add the objects themselves.
case `$CC -V 2>&1` in
*"Version 7."*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 8.0 or newer
tmp_idyn=
case $host_cpu in
ia64*) tmp_idyn=' -i_dynamic';;
esac
_LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
;;
pgCC* | pgcpp*)
# Portland Group C++ compiler
case `$CC -V` in
*pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
_LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
_LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
$RANLIB $oldlib'
_LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 6 and above use weak symbols
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
;;
cxx*)
# Compaq C++
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols'
runpath_var=LD_RUN_PATH
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
;;
xl* | mpixl* | bgxl*)
# IBM XL 8.0 on PPC, with GNU ld
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
_LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
;;
*)
case `$CC -V 2>&1 | $SED 5q` in
*Sun\ C*)
# Sun C++ 5.9
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
_LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
# Not sure whether something based on
# $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
# would be better.
output_verbose_link_cmd='func_echo_all'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
# necessary to make sure instantiated templates are included
# in the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
;;
esac
;;
esac
;;
lynxos*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
m88k*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
mvs*)
case $cc_basename in
cxx*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
;;
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
wlarc=
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
fi
# Workaround some broken pre-1.5 toolchains
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
;;
*nto* | *qnx*)
_LT_TAGVAR(ld_shlibs, $1)=yes
;;
openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
_LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
fi
output_verbose_link_cmd=func_echo_all
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
osf3* | osf4* | osf5*)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
_LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Archives containing C++ object files must be created using
# the KAI C++ compiler.
case $host in
osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
esac
;;
RCC*)
# Rational C++ 2.4.1
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
cxx*)
case $host in
osf3*)
_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
;;
*)
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
echo "-hidden">> $lib.exp~
$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
$RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
;;
esac
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
if test yes,no = "$GXX,$with_gnu_ld"; then
_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
case $host in
osf3*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
esac
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
psos*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
sunos4*)
case $cc_basename in
CC*)
# Sun C++ 4.x
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
lcc*)
# Lucid
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
;;
solaris*)
case $cc_basename in
CC* | sunCC*)
# Sun C++ 4.2, 5.x and Centerline C++
_LT_TAGVAR(archive_cmds_need_lc,$1)=yes
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
_LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The compiler driver will combine and reorder linker options,
# but understands '-z linker_flag'.
# Supported since Solaris 2.6 (maybe 2.5.1?)
_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
;;
esac
_LT_TAGVAR(link_all_deplibs, $1)=yes
output_verbose_link_cmd='func_echo_all'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
# necessary to make sure instantiated templates are included
# in the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
;;
gcx*)
# Green Hills C++ Compiler
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
# The C++ compiler must be used to create the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
;;
*)
# GNU C++ compiler with Solaris linker
if test yes,no = "$GXX,$with_gnu_ld"; then
_LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs'
if $CC --version | $GREP -v '^2\.7' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
# g++ 2.7 appears to require '-G' NOT '-shared' on this
# platform.
_LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir'
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
;;
esac
fi
;;
esac
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
_LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
sysv5* | sco3.2v5* | sco5v6*)
# Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
_LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
'"$_LT_TAGVAR(old_archive_cmds, $1)"
_LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
'"$_LT_TAGVAR(reload_cmds, $1)"
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
tandem*)
case $cc_basename in
NCC*)
# NonStop-UX NCC 3.20
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
;;
vxworks*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
_LT_TAGVAR(GCC, $1)=$GXX
_LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
_LT_SYS_HIDDEN_LIBDEPS($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi # test -n "$compiler"
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
LDCXX=$LD
LD=$lt_save_LD
GCC=$lt_save_GCC
with_gnu_ld=$lt_save_with_gnu_ld
lt_cv_path_LDCXX=$lt_cv_path_LD
lt_cv_path_LD=$lt_save_path_LD
lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
fi # test yes != "$_lt_caught_CXX_error"
AC_LANG_POP
])# _LT_LANG_CXX_CONFIG
# _LT_FUNC_STRIPNAME_CNF
# ----------------------
# func_stripname_cnf prefix suffix name
# strip PREFIX and SUFFIX off of NAME.
# PREFIX and SUFFIX must not contain globbing or regex special
# characters, hashes, percent signs, but SUFFIX may contain a leading
# dot (in which case that matches only a dot).
#
# This function is identical to the (non-XSI) version of func_stripname,
# except this one can be used by m4 code that may be executed by configure,
# rather than the libtool script.
m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
AC_REQUIRE([_LT_DECL_SED])
AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
func_stripname_cnf ()
{
case @S|@2 in
.*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;;
*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;;
esac
} # func_stripname_cnf
])# _LT_FUNC_STRIPNAME_CNF
# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
# ---------------------------------
# Figure out "hidden" library dependencies from verbose
# compiler output when linking a shared library.
# Parse the compiler output and extract the necessary
# objects, libraries and library flags.
m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
# Dependencies to place before and after the object being linked:
_LT_TAGVAR(predep_objects, $1)=
_LT_TAGVAR(postdep_objects, $1)=
_LT_TAGVAR(predeps, $1)=
_LT_TAGVAR(postdeps, $1)=
_LT_TAGVAR(compiler_lib_search_path, $1)=
dnl we can't use the lt_simple_compile_test_code here,
dnl because it contains code intended for an executable,
dnl not a library. It's possible we should let each
dnl tag define a new lt_????_link_test_code variable,
dnl but it's only used here...
m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
int a;
void foo (void) { a = 0; }
_LT_EOF
], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
class Foo
{
public:
Foo (void) { a = 0; }
private:
int a;
};
_LT_EOF
], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
subroutine foo
implicit none
integer*4 a
a=0
return
end
_LT_EOF
], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
subroutine foo
implicit none
integer a
a=0
return
end
_LT_EOF
], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
public class foo {
private int a;
public void bar (void) {
a = 0;
}
};
_LT_EOF
], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
package foo
func foo() {
}
_LT_EOF
])
_lt_libdeps_save_CFLAGS=$CFLAGS
case "$CC $CFLAGS " in #(
*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
esac
dnl Parse the compiler output and extract the necessary
dnl objects, libraries and library flags.
if AC_TRY_EVAL(ac_compile); then
# Parse the compiler output and extract the necessary
# objects, libraries and library flags.
# Sentinel used to keep track of whether or not we are before
# the conftest object file.
pre_test_object_deps_done=no
for p in `eval "$output_verbose_link_cmd"`; do
case $prev$p in
-L* | -R* | -l*)
# Some compilers place space between "-{L,R}" and the path.
# Remove the space.
if test x-L = "$p" ||
test x-R = "$p"; then
prev=$p
continue
fi
# Expand the sysroot to ease extracting the directories later.
if test -z "$prev"; then
case $p in
-L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
-R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
-l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
esac
fi
case $p in
=*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
esac
if test no = "$pre_test_object_deps_done"; then
case $prev in
-L | -R)
# Internal compiler library paths should come after those
# provided the user. The postdeps already come after the
# user supplied libs so there is no need to process them.
if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
_LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p
else
_LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p"
fi
;;
# The "-l" case would never come before the object being
# linked, so don't bother handling this case.
esac
else
if test -z "$_LT_TAGVAR(postdeps, $1)"; then
_LT_TAGVAR(postdeps, $1)=$prev$p
else
_LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p"
fi
fi
prev=
;;
*.lto.$objext) ;; # Ignore GCC LTO objects
*.$objext)
# This assumes that the test object file only shows up
# once in the compiler output.
if test "$p" = "conftest.$objext"; then
pre_test_object_deps_done=yes
continue
fi
if test no = "$pre_test_object_deps_done"; then
if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
_LT_TAGVAR(predep_objects, $1)=$p
else
_LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
fi
else
if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
_LT_TAGVAR(postdep_objects, $1)=$p
else
_LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
fi
fi
;;
*) ;; # Ignore the rest.
esac
done
# Clean up.
rm -f a.out a.exe
else
echo "libtool.m4: error: problem compiling $1 test program"
fi
$RM -f confest.$objext
CFLAGS=$_lt_libdeps_save_CFLAGS
# PORTME: override above test on systems where it is broken
m4_if([$1], [CXX],
[case $host_os in
interix[[3-9]]*)
# Interix 3.5 installs completely hosed .la files for C++, so rather than
# hack all around it, let's just trust "g++" to DTRT.
_LT_TAGVAR(predep_objects,$1)=
_LT_TAGVAR(postdep_objects,$1)=
_LT_TAGVAR(postdeps,$1)=
;;
esac
])
case " $_LT_TAGVAR(postdeps, $1) " in
*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
esac
_LT_TAGVAR(compiler_lib_search_dirs, $1)=
if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
_LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'`
fi
_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
[The directories searched by this compiler when creating a shared library])
_LT_TAGDECL([], [predep_objects], [1],
[Dependencies to place before and after the objects being linked to
create a shared library])
_LT_TAGDECL([], [postdep_objects], [1])
_LT_TAGDECL([], [predeps], [1])
_LT_TAGDECL([], [postdeps], [1])
_LT_TAGDECL([], [compiler_lib_search_path], [1],
[The library search path used internally by the compiler when linking
a shared library])
])# _LT_SYS_HIDDEN_LIBDEPS
# _LT_LANG_F77_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a Fortran 77 compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_F77_CONFIG],
[AC_LANG_PUSH(Fortran 77)
if test -z "$F77" || test no = "$F77"; then
_lt_disable_F77=yes
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
# Source file extension for f77 test sources.
ac_ext=f
# Object file extension for compiled f77 test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# No sense in running all these tests if we already determined that
# the F77 compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
if test yes != "$_lt_disable_F77"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
return
end
"
# Code to be used in simple link tests
lt_simple_link_test_code="\
program t
end
"
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_GCC=$GCC
lt_save_CFLAGS=$CFLAGS
CC=${F77-"f77"}
CFLAGS=$FFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
GCC=$G77
if test -n "$compiler"; then
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
if test ia64 != "$host_cpu"; then
case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
yes,aix,yes) ;; # shared object as lib.so file only
yes,svr4,*) ;; # shared object as lib.so archive member only
yes,*) enable_static=no ;; # shared object in lib.a archive as well
esac
fi
;;
esac
AC_MSG_RESULT([$enable_shared])
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
_LT_TAGVAR(GCC, $1)=$G77
_LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi # test -n "$compiler"
GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
fi # test yes != "$_lt_disable_F77"
AC_LANG_POP
])# _LT_LANG_F77_CONFIG
# _LT_LANG_FC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for a Fortran compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_FC_CONFIG],
[AC_LANG_PUSH(Fortran)
if test -z "$FC" || test no = "$FC"; then
_lt_disable_FC=yes
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
# Source file extension for fc test sources.
ac_ext=${ac_fc_srcext-f}
# Object file extension for compiled fc test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# No sense in running all these tests if we already determined that
# the FC compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
if test yes != "$_lt_disable_FC"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
return
end
"
# Code to be used in simple link tests
lt_simple_link_test_code="\
program t
end
"
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_GCC=$GCC
lt_save_CFLAGS=$CFLAGS
CC=${FC-"f95"}
CFLAGS=$FCFLAGS
compiler=$CC
GCC=$ac_cv_fc_compiler_gnu
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
if test -n "$compiler"; then
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
if test ia64 != "$host_cpu"; then
case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
yes,aix,yes) ;; # shared object as lib.so file only
yes,svr4,*) ;; # shared object as lib.so archive member only
yes,*) enable_static=no ;; # shared object in lib.a archive as well
esac
fi
;;
esac
AC_MSG_RESULT([$enable_shared])
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
_LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu
_LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
_LT_SYS_HIDDEN_LIBDEPS($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi # test -n "$compiler"
GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
fi # test yes != "$_lt_disable_FC"
AC_LANG_POP
])# _LT_LANG_FC_CONFIG
# _LT_LANG_GCJ_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for the GNU Java Compiler compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GCJ_CONFIG],
[AC_REQUIRE([LT_PROG_GCJ])dnl
AC_LANG_SAVE
# Source file extension for Java test sources.
ac_ext=java
# Object file extension for compiled Java test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code="class foo {}"
# Code to be used in simple link tests
lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=yes
CC=${GCJ-"gcj"}
CFLAGS=$GCJFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])
# GCJ did not exist at the time GCC didn't implicitly link libc in.
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
if test -n "$compiler"; then
_LT_COMPILER_NO_RTTI($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi
AC_LANG_RESTORE
GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_GCJ_CONFIG
# _LT_LANG_GO_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for the GNU Go compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GO_CONFIG],
[AC_REQUIRE([LT_PROG_GO])dnl
AC_LANG_SAVE
# Source file extension for Go test sources.
ac_ext=go
# Object file extension for compiled Go test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code="package main; func main() { }"
# Code to be used in simple link tests
lt_simple_link_test_code='package main; func main() { }'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=yes
CC=${GOC-"gccgo"}
CFLAGS=$GOFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])
# Go did not exist at the time GCC didn't implicitly link libc in.
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
if test -n "$compiler"; then
_LT_COMPILER_NO_RTTI($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi
AC_LANG_RESTORE
GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_GO_CONFIG
# _LT_LANG_RC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for the Windows resource compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_RC_CONFIG],
[AC_REQUIRE([LT_PROG_RC])dnl
AC_LANG_SAVE
# Source file extension for RC test sources.
ac_ext=rc
# Object file extension for compiled RC test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
# Code to be used in simple link tests
lt_simple_link_test_code=$lt_simple_compile_test_code
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=
CC=${RC-"windres"}
CFLAGS=
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
if test -n "$compiler"; then
:
_LT_CONFIG($1)
fi
GCC=$lt_save_GCC
AC_LANG_RESTORE
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_RC_CONFIG
# LT_PROG_GCJ
# -----------
AC_DEFUN([LT_PROG_GCJ],
[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
[m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
[AC_CHECK_TOOL(GCJ, gcj,)
test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2"
AC_SUBST(GCJFLAGS)])])[]dnl
])
# Old name:
AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
# LT_PROG_GO
# ----------
AC_DEFUN([LT_PROG_GO],
[AC_CHECK_TOOL(GOC, gccgo,)
])
# LT_PROG_RC
# ----------
AC_DEFUN([LT_PROG_RC],
[AC_CHECK_TOOL(RC, windres,)
])
# Old name:
AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_RC], [])
# _LT_DECL_EGREP
# --------------
# If we don't have a new enough Autoconf to choose the best grep
# available, choose the one first in the user's PATH.
m4_defun([_LT_DECL_EGREP],
[AC_REQUIRE([AC_PROG_EGREP])dnl
AC_REQUIRE([AC_PROG_FGREP])dnl
test -z "$GREP" && GREP=grep
_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
_LT_DECL([], [EGREP], [1], [An ERE matcher])
_LT_DECL([], [FGREP], [1], [A literal string matcher])
dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
AC_SUBST([GREP])
])
# _LT_DECL_OBJDUMP
# --------------
# If we don't have a new enough Autoconf to choose the best objdump
# available, choose the one first in the user's PATH.
m4_defun([_LT_DECL_OBJDUMP],
[AC_CHECK_TOOL(OBJDUMP, objdump, false)
test -z "$OBJDUMP" && OBJDUMP=objdump
_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
AC_SUBST([OBJDUMP])
])
# _LT_DECL_DLLTOOL
# ----------------
# Ensure DLLTOOL variable is set.
m4_defun([_LT_DECL_DLLTOOL],
[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
test -z "$DLLTOOL" && DLLTOOL=dlltool
_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
AC_SUBST([DLLTOOL])
])
# _LT_DECL_FILECMD
# ----------------
# Check for a file(cmd) program that can be used to detect file type and magic
m4_defun([_LT_DECL_FILECMD],
[AC_CHECK_TOOL([FILECMD], [file], [:])
_LT_DECL([], [FILECMD], [1], [A file(cmd) program that detects file types])
])# _LD_DECL_FILECMD
# _LT_DECL_SED
# ------------
# Check for a fully-functional sed program, that truncates
# as few characters as possible. Prefer GNU sed if found.
m4_defun([_LT_DECL_SED],
[AC_PROG_SED
test -z "$SED" && SED=sed
Xsed="$SED -e 1s/^X//"
_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
[Sed that helps us avoid accidentally triggering echo(1) options like -n])
])# _LT_DECL_SED
m4_ifndef([AC_PROG_SED], [
############################################################
# NOTE: This macro has been submitted for inclusion into #
# GNU Autoconf as AC_PROG_SED. When it is available in #
# a released version of Autoconf we should remove this #
# macro and use it instead. #
############################################################
m4_defun([AC_PROG_SED],
[AC_MSG_CHECKING([for a sed that does not truncate output])
AC_CACHE_VAL(lt_cv_path_SED,
[# Loop through the user's path and test for sed and gsed.
# Then use that list of sed's as ones to test for truncation.
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for lt_ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
fi
done
done
done
IFS=$as_save_IFS
lt_ac_max=0
lt_ac_count=0
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
test ! -f "$lt_ac_sed" && continue
cat /dev/null > conftest.in
lt_ac_count=0
echo $ECHO_N "0123456789$ECHO_C" >conftest.in
# Check for GNU sed and select it if it is found.
if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
lt_cv_path_SED=$lt_ac_sed
break
fi
while true; do
cat conftest.in conftest.in >conftest.tmp
mv conftest.tmp conftest.in
cp conftest.in conftest.nl
echo >>conftest.nl
$lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
cmp -s conftest.out conftest.nl || break
# 10000 chars as input seems more than enough
test 10 -lt "$lt_ac_count" && break
lt_ac_count=`expr $lt_ac_count + 1`
if test "$lt_ac_count" -gt "$lt_ac_max"; then
lt_ac_max=$lt_ac_count
lt_cv_path_SED=$lt_ac_sed
fi
done
done
])
SED=$lt_cv_path_SED
AC_SUBST([SED])
AC_MSG_RESULT([$SED])
])#AC_PROG_SED
])#m4_ifndef
# Old name:
AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_SED], [])
# _LT_CHECK_SHELL_FEATURES
# ------------------------
# Find out whether the shell is Bourne or XSI compatible,
# or has some other useful features.
m4_defun([_LT_CHECK_SHELL_FEATURES],
[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
lt_unset=unset
else
lt_unset=false
fi
_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
# test EBCDIC or ASCII
case `echo X|tr X '\101'` in
A) # ASCII based system
# \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
lt_SP2NL='tr \040 \012'
lt_NL2SP='tr \015\012 \040\040'
;;
*) # EBCDIC based system
lt_SP2NL='tr \100 \n'
lt_NL2SP='tr \r\n \100\100'
;;
esac
_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
])# _LT_CHECK_SHELL_FEATURES
# _LT_PATH_CONVERSION_FUNCTIONS
# -----------------------------
# Determine what file name conversion functions should be used by
# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
# for certain cross-compile configurations and native mingw.
m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_MSG_CHECKING([how to convert $build file names to $host format])
AC_CACHE_VAL(lt_cv_to_host_file_cmd,
[case $host in
*-*-mingw* )
case $build in
*-*-mingw* ) # actually msys
lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
;;
*-*-cygwin* )
lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
;;
* ) # otherwise, assume *nix
lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
;;
esac
;;
*-*-cygwin* )
case $build in
*-*-mingw* ) # actually msys
lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
;;
*-*-cygwin* )
lt_cv_to_host_file_cmd=func_convert_file_noop
;;
* ) # otherwise, assume *nix
lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
;;
esac
;;
* ) # unhandled hosts (and "normal" native builds)
lt_cv_to_host_file_cmd=func_convert_file_noop
;;
esac
])
to_host_file_cmd=$lt_cv_to_host_file_cmd
AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
[0], [convert $build file names to $host format])dnl
AC_MSG_CHECKING([how to convert $build file names to toolchain format])
AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
[#assume ordinary cross tools, or native build.
lt_cv_to_tool_file_cmd=func_convert_file_noop
case $host in
*-*-mingw* )
case $build in
*-*-mingw* ) # actually msys
lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
;;
esac
;;
esac
])
to_tool_file_cmd=$lt_cv_to_tool_file_cmd
AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
[0], [convert $build files to toolchain format])dnl
])# _LT_PATH_CONVERSION_FUNCTIONS
lcmaps-plugins-jobrep-1.5.7/project/lt~obsolete.m4 0000644 0001750 0000144 00000014007 14574774130 017156 0000000 0000000 # lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
#
# Copyright (C) 2004-2005, 2007, 2009, 2011-2019, 2021-2022 Free
# Software Foundation, Inc.
# Written by Scott James Remnant, 2004.
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
# serial 5 lt~obsolete.m4
# These exist entirely to fool aclocal when bootstrapping libtool.
#
# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN),
# which have later been changed to m4_define as they aren't part of the
# exported API, or moved to Autoconf or Automake where they belong.
#
# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
# using a macro with the same name in our local m4/libtool.m4 it'll
# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
# and doesn't know about Autoconf macros at all.)
#
# So we provide this file, which has a silly filename so it's always
# included after everything else. This provides aclocal with the
# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
# because those macros already exist, or will be overwritten later.
# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
#
# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
# Yes, that means every name once taken will need to remain here until
# we give up compatibility with versions before 1.7, at which point
# we need to keep only those names which we still refer to.
# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
lcmaps-plugins-jobrep-1.5.7/project/lcmaps.m4 0000644 0001750 0000144 00000037354 14574533163 016074 0000000 0000000 dnl Licensed under the Apache License, Version 2.0 (the "License");
dnl you may not use this file except in compliance with the License.
dnl You may obtain a copy of the License at
dnl
dnl http://www.apache.org/licenses/LICENSE-2.0
dnl
dnl Unless required by applicable law or agreed to in writing, software
dnl distributed under the License is distributed on an "AS IS" BASIS,
dnl WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
dnl See the License for the specific language governing permissions and
dnl limitations under the License.
dnl
dnl Authors:
dnl 2010-
dnl Oscar Koeroo
dnl Mischa Sall\'e
dnl NIKHEF Amsterdam, the Netherlands
dnl
dnl Usage: AC_LCMAPS or AC_LCMAPS([sub-component])
dnl AC_LCMAPS_INTERFACE([interface-component])
dnl AC_LCMAPS set *_LIBS, AC_LCMAPS_INTERFACE sets *_CFLAGS
AC_DEFUN([AC_LCMAPS],
[
dnl Make sure autoconf (bootstrap) fails when macro is undefined
ifdef([PKG_CHECK_MODULES],
[],
[m4_fatal([macro PKG_CHECK_MODULES is not defined])])
AC_REQUIRE([_AC_LCMAPS_CONFIG_FLAGS])
AC_REQUIRE([AC_VOMS])
dnl For lcmaps itself (not just interface) add libdir option.
AC_ARG_WITH([lcmaps-libdir],
[AC_HELP_STRING([--with-lcmaps-libdir=DIR],
[Directory where LCMAPS libraries are installed (default either LCMAPS-PREFIX/lib or LCMAPS-PREFIX/lib64)])],
[ac_lcmaps_libdir=$withval],
[])
dnl Check for gsi mode
enable_lcmaps_gsi_mode_default=yes
AC_ARG_ENABLE([lcmaps-gsi-mode],
[AC_HELP_STRING([--enable-lcmaps-gsi-mode],
[use lcmaps flavour that provides a GSI interface (default)])],
[enable_lcmaps_gsi_mode=$enableval],
[enable_lcmaps_gsi_mode=$enable_lcmaps_gsi_mode_default])
dnl check different modules, depending on lcmaps-gsi-mode/LCMAPS_FLAVOUR
if test "x$enable_lcmaps_gsi_mode" = "xyes" ; then
dnl only run GSSAPI_GSI check when we haven't done so before
if test "x$have_globus_gssapi_gsi" = "x" ; then
AC_GLOBUS([GSSAPI_GSI],[],AC_MSG_WARN(["missing dependency gssapi-gsi"]))
fi
dnl only test lcmaps when we have globus_gssapi_gsi
if test "x$have_globus_gssapi_gsi" = "xyes" ; then
LCMAPS_FLAVOUR=""
AC_DEFINE(LCMAPS_GSI_MODE, 1, "If defined provide the GSI interface to LCMAPS")
dnl Always test for basic LCMAPS
_AC_LCMAPS_MODULE([lcmaps])
dnl if $1 == lcmaps we're done
ifelse([$1],[lcmaps],[],[
dnl IF we have lcmaps, now test for secondary libraries
if test "x$have_lcmaps" = "xyes" ; then
dnl If an argument was given: test only that library, otherwise check all
ifelse([$1],[],[
_AC_LCMAPS_MODULE([lcmaps-verify-account-from-pem])
_AC_LCMAPS_MODULE([lcmaps-return-account-from-pem])
_AC_LCMAPS_MODULE([lcmaps-return-poolindex])
_AC_LCMAPS_MODULE([lcmaps-gss-assist-gridmap])
],[
_AC_LCMAPS_MODULE([$1])
])
fi
])
else
have_lcmaps=no
fi
else
LCMAPS_FLAVOUR="_without_gsi"
dnl Always test for basic LCMAPS-without-gsi
_AC_LCMAPS_MODULE([lcmaps-without-gsi])
dnl IF we have lcmaps-without-gsi, test for secondary libraries
if test "x$have_lcmaps_without_gsi" = "xyes" ; then
dnl If an argument was given: test only that library, otherwise check all
ifelse([$1],[],[
_AC_LCMAPS_MODULE([lcmaps-return-poolindex-without-gsi])
_AC_LCMAPS_MODULE([lcmaps-gss-assist-gridmap-without-gsi])
],[
_AC_LCMAPS_MODULE($1-without-gsi)
])
fi
fi
AM_CONDITIONAL(LCMAPS_GSI_MODE, test x$enable_lcmaps_gsi_mode = xyes)
])
dnl Usage: AC_LCMAPS_INTERFACE([],[minimal version])
dnl e.g. AC_LCMAPS_INTERFACE([globus]) or AC_LCMAPS_INTERFACE([basic],1.4.31)
dnl $1 - type (lowercase)
dnl $2 - minimal version
AC_DEFUN([AC_LCMAPS_INTERFACE],
[
dnl Make sure autoconf (bootstrap) fails when macro is undefined
ifdef([PKG_CHECK_MODULES],
[],
[m4_fatal([macro PKG_CHECK_MODULES is not defined])])
dnl standard lcmaps configure flags
AC_REQUIRE([_AC_LCMAPS_CONFIG_FLAGS])
dnl Setup requested major,minor and patch
ifelse([$2],[],
[
dnl in absence of version: just 0
AC_DEFUN([_AC_LCMAPS_MAJOR],[0])
AC_DEFUN([_AC_LCMAPS_MINOR],[0])
AC_DEFUN([_AC_LCMAPS_PATCH],[0])
],[
AC_DEFUN([_AC_LCMAPS_MAJOR],
[regexp([$2],[^\([0-9]+\)\(\.\([0-9]+\)\)?\(\.\([0-9]+\)\)?$],
[\1])])
ifelse(_AC_LCMAPS_MAJOR,[],[
dnl Version is non-empty, but isn't valid
m4_fatal([LCMAPS_INTERFACE version $2 is not of form X[.Y[.Z]]])
])
dnl Now define the minor and patch version
AC_DEFUN([_AC_LCMAPS_MINOR],
[regexp([$2],[^\([0-9]+\)\(\.\([0-9]+\)\)?\(\.\([0-9]+\)\)?$],
[ifelse([\3],[],[0],[\3])])])
AC_DEFUN([_AC_LCMAPS_PATCH],
[regexp([$2],[^\([0-9]+\)\(\.\([0-9]+\)\)?\(\.\([0-9]+\)\)?$],
[ifelse([\5],[],[0],[\5])])])
])
dnl Setup old-style header
ifelse([$1],[basic], [AC_DEFUN([_AC_LCMAPS_HEADER],[lcmaps_types.h])],
[$1],[openssl],[AC_DEFUN([_AC_LCMAPS_HEADER],[lcmaps.h])],
[$1],[globus], [AC_DEFUN([_AC_LCMAPS_HEADER],[lcmaps_return_poolindex.h])],
[$1],[], [AC_DEFUN([_AC_LCMAPS_HEADER],[lcmaps_return_poolindex.h])],
[], [], [m4_fatal([Unknown type $1 for AC_LCMAPS_INTERFACE])])
dnl Check if we use old-style argument-less interface: use globus
ifelse([$1],[],[
dnl Old style
m4_errprintn([WARNING: Using old-style AC_LCMAPS_INTERFACE])
m4_errprintn([ will use AC_LCMAPS_INTERFACE(globus)])
_AC_LCMAPS_INTERFACE([globus],[])
dnl Set LCMAPS_INTERFACE variables for legacy support
have_lcmaps_interface=$have_lcmaps_globus_interface
LCMAPS_INTERFACE_CFLAGS=$LCMAPS_GLOBUS_INTERFACE_CFLAGS
AC_SUBST(LMAPS_INTERFACE_CFLAGS)
],[
dnl New style
_AC_LCMAPS_INTERFACE([$1],[$2])
])
])
dnl This macro defines the --with-lcmaps-prefix and --with-lcmaps-includes
dnl options.
AC_DEFUN([_AC_LCMAPS_CONFIG_FLAGS],
[
AC_ARG_WITH([lcmaps-prefix],
[AC_HELP_STRING([--with-lcmaps-prefix=DIR],
[Prefix where LCMAPS is installed (default /usr)])],
[ac_lcmaps_prefix=$withval],
[ac_lcmaps_prefix=/usr])
AC_ARG_WITH([lcmaps-includes],
[AC_HELP_STRING([--with-lcmaps-includes=DIR],
[Directory where LCMAPS headers are installed (default LCMAPS-PREFIX/include)])],
[ac_lcmaps_includes=$withval],
[ac_lcmaps_includes=$ac_lcmaps_prefix/include])
])
dnl This macro is the basic module checking macro: when prefix is given, test
dnl there first and if that fails test using pkg-config. Without prefix
dnl includes, the order is reversed.
dnl $1 - module
AC_DEFUN([_AC_LCMAPS_MODULE],
[
if test "x$with_lcmaps_prefix" = "x" ; then
PKG_CHECK_MODULES(translit($1,[a-z-],[A-Z_]), $1,
have_lcmaps_mod=yes, have_lcmaps_mod=no)
if test "$have_lcmaps_mod" = "no" ; then
_AC_LCMAPS_DIRECT_CHECK_MODULES(translit($1,[a-z-],[A-Z_]),translit($1,[-],[_]),
have_lcmaps_mod=yes, have_lcmaps_mod=no)
fi
else
_AC_LCMAPS_DIRECT_CHECK_MODULES(translit($1,[a-z-],[A-Z_]), translit($1,[-],[_]),
have_lcmaps_mod=yes, have_lcmaps_mod=no)
if test "$have_lcmaps_mod" = "no" ; then
PKG_CHECK_MODULES(translit($1,[a-z-],[A-Z_]), $1,
have_lcmaps_mod=yes, have_lcmaps_mod=no)
fi
fi
[have_]translit($1,[-],[_])=$have_lcmaps_mod
AC_SUBST(translit($1,[a-z-],[A-Z_])_LIBS)
])
AC_DEFUN([_AC_LCMAPS_DIRECT_CHECK_MODULES],
[
ac_save_LIBS=$LIBS
if test "x$2" != "xlcmaps" -a "x$2" != "xlcmaps_without_gsi" ; then
ac_lcmaps_extralibs="$VOMS_CPP_LIBS -llcmaps$LCMAPS_FLAVOUR"
else
ac_lcmaps_extralibs="$VOMS_CPP_LIBS"
fi
if test "x$LCMAPS_FLAVOUR" = "x" ; then
ac_lcmaps_extralibs="$GLOBUS_GSSAPI_GSI_NOTHR_LIBS $ac_lcmaps_extralibs"
ac_lcmaps_extralibs="$GLOBUS_GSSAPI_GSI_LIBS $ac_lcmaps_extralibs"
ac_lcmaps_extralibs="$GLOBUS_GSS_ASSIST_NOTHR_LIBS $ac_lcmaps_extralibs"
ac_lcmaps_extralibs="$GLOBUS_GSS_ASSIST_LIBS $ac_lcmaps_extralibs"
ac_lcmaps_extralibs="$GLOBUS_GSI_CERT_UTILS_NOTHR_LIBS $ac_lcmaps_extralibs"
ac_lcmaps_extralibs="$GLOBUS_GSI_CERT_UTILS_LIBS $ac_lcmaps_extralibs"
fi
# check whether we have specified either lcmaps_libdir or lcmaps_prefix
if test "x$with_lcmaps_libdir" != "x" -o "x$with_lcmaps_prefix" != "x" ; then
# If we haven't determined a libdir, do it now from prefix
if test "x$ac_lcmaps_libdir" = "x" ; then
if test "x$host_cpu" = "xx86_64" \
-a -e $ac_lcmaps_prefix/lib64 \
-a ! -h $ac_lcmaps_prefix/lib64 ; then
ac_lcmaps_libdir="$ac_lcmaps_prefix/lib64"
else
ac_lcmaps_libdir="$ac_lcmaps_prefix/lib"
fi
fi
if test "x$LCMAPS_FLAVOUR" = "x" -a "x$ac_globus_libdir" != "x" ; then
ac_lcmaps_libpath="$ac_globus_libdir:$ac_lcmaps_libdir"
else
ac_lcmaps_libpath="$ac_lcmaps_libdir"
fi
ac_try_LIBS="-L$ac_lcmaps_libdir -l$2 $ac_lcmaps_extralibs"
AC_MSG_CHECKING([for $1 at system default and $ac_lcmaps_libdir])
else
if test "x$LCMAPS_FLAVOUR" = "x" -a "x$ac_globus_libdir" != "x" ; then
ac_lcmaps_libpath="$ac_globus_libdir"
else
ac_lcmas_libpath=""
fi
ac_try_LIBS="-l$2 $ac_lcmaps_extralibs "
AC_MSG_CHECKING([for $1 at system default])
fi
if test "x$ac_lcmaps_libpath" != "x" ; then
if test "x$LD_LIBRARY_PATH" != "x" ; then
ac_save_LD_LIBRARY_PATH=$LD_LIBRARY_PATH
export LD_LIBRARY_PATH="$ac_lcmaps_libpath:$LD_LIBRARY_PATH"
else
export LD_LIBRARY_PATH="$ac_lcmaps_libpath"
fi
if test "x$DYLD_LIBRARY_PATH" != "x" ; then
ac_save_DYLD_LIBRARY_PATH=$DYLD_LIBRARY_PATH
export DYLD_LIBRARY_PATH="$ac_lcmaps_libpath:$DYLD_LIBRARY_PATH"
else
export DYLD_LIBRARY_PATH="$ac_lcmaps_libpath"
fi
fi
dnl We want to add the cmdline specified LIBS
LIBS="$ac_try_LIBS $LIBS"
AC_LINK_IFELSE([AC_LANG_SOURCE( [
int getMajorVersionNumber(void) { return 0; }
int getMinorVersionNumber(void) { return 0; }
int getPatchVersionNumber(void) { return 0; }
int main(void) {return 0;}] )],
[have_mod=yes], [have_mod=no])
AC_MSG_RESULT([$have_mod])
if test "x$have_mod" = "xyes" ; then
[$3]
$1_LIBS="$ac_try_LIBS"
else
[$4]
$1_LIBS=""
fi
LIBS=$ac_save_LIBS
if test "x$ac_save_LD_LIBRARY_PATH" = "x" ; then
unset LD_LIBRARY_PATH
else
LD_LIBRARY_PATH=$ac_save_LD_LIBRARY_PATH
fi
if test "x$ac_save_DYLD_LIBRARY_PATH" = "x" ; then
unset DYLD_LIBRARY_PATH
else
DYLD_LIBRARY_PATH=$ac_save_DYLD_LIBRARY_PATH
fi
if test "x$ac_save_LD_LIBRARY_PATH" = "x" ; then
unset LD_LIBRARY_PATH
else
LD_LIBRARY_PATH=$ac_save_LD_LIBRARY_PATH
fi
if test "x$ac_save_DYLD_LIBRARY_PATH" = "x" ; then
unset DYLD_LIBRARY_PATH
else
DYLD_LIBRARY_PATH=$ac_save_DYLD_LIBRARY_PATH
fi
])
dnl This macro is the basic interface checking macro: when prefix or includes is
dnl given, test there first and if that fails test using pkg-config. Without
dnl prefix and includes, the order is reversed. When no version is given, the
dnl legacy lcmaps-interface is also tried (in the same order: direct or
dnl pkg-config).
dnl $1 - type
dnl $2 - minimum version
AC_DEFUN([_AC_LCMAPS_INTERFACE],
[
dnl Test for GSSAPI_GSI for globus interface
ifelse([$1],[globus],[
dnl only run GSSAPI_GSI check when we haven't done so before
if test "x$have_globus_gssapi_gsi" = "x" ; then
AC_GLOBUS([GSSAPI_GSI],[],AC_MSG_WARN(["missing dependency gssapi-gsi"]))
fi
],[])
if test "x$with_lcmaps_prefix" = "x" -a "x$with_lcmaps_includes" = "x" ; then
dnl test lcmaps--interface first, when no version: then lcmaps-interface
PKG_CHECK_MODULES([LCMAPS_]translit($1,[a-z],[A-Z])[_INTERFACE],
[lcmaps-$1-interface ifelse([$2],[],[],[>= $2])],
[have_lcmaps_$1_interface=yes], [have_lcmaps_$1_interface=no])
if test "x$have_lcmaps_$1_interface" = "xno" ; then
_AC_LCMAPS_DIRECT_CHECK_INTERFACE([LCMAPS_]translit($1,[a-z],[A-Z])[_INTERFACE], [lcmaps_$1.h],
[have_lcmaps_$1_interface=yes], [have_lcmaps_$1_interface=no])
ifelse([$2],[],[
if test "x$have_lcmaps_$1_interface" = "xno" ; then
dnl test old-style lcmaps-interface
PKG_CHECK_MODULES([LCMAPS_INTERFACE], [lcmaps-interface < 1.4.31],
[have_lcmaps_$1_interface=yes], [have_lcmaps_$1_interface=no])
if test "x$have_lcmaps_$1_interface" = "xno" ; then
_AC_LCMAPS_DIRECT_CHECK_INTERFACE([LCMAPS_INTERFACE], _AC_LCMAPS_HEADER,
[have_lcmaps_$1_interface=yes], [have_lcmaps_$1_interface=no])
fi
[LCMAPS_]translit($1,[a-z],[A-Z])[_INTERFACE_CFLAGS]=$LCMAPS_INTERFACE_CFLAGS
fi
],[])
fi
else
dnl test lcmaps--interface first, when no version: then lcmaps-interface
_AC_LCMAPS_DIRECT_CHECK_INTERFACE([LCMAPS_]translit($1,[a-z],[A-Z])[_INTERFACE], [lcmaps_$1.h],
[have_lcmaps_$1_interface=yes], [have_lcmaps_$1_interface=no])
if test "x$have_lcmaps_$1_interface" = "xno" ; then
PKG_CHECK_MODULES([LCMAPS_]translit($1,[a-z],[A-Z])[_INTERFACE],
[lcmaps-$1-interface ifelse([$2],[],[],[>= $2])],
[have_lcmaps_$1_interface=yes], [have_lcmaps_$1_interface=no])
ifelse([$2],[],[
if test "x$have_lcmaps_$1_interface" = "xno" ; then
dnl test old-style lcmaps-interface
_AC_LCMAPS_DIRECT_CHECK_INTERFACE([LCMAPS_INTERFACE], _AC_LCMAPS_HEADER,
[have_lcmaps_$1_interface=yes], [have_lcmaps_$1_interface=no])
if test "x$have_lcmaps_$1_interface" = "xno" ; then
PKG_CHECK_MODULES([LCMAPS_INTERFACE], [lcmaps-interface < 1.4.31],
[have_lcmaps_$1_interface=yes], [have_lcmaps_$1_interface=no])
fi
[LCMAPS_]translit($1,[a-z],[A-Z])[_INTERFACE_CFLAGS]=$LCMAPS_INTERFACE_CFLAGS
fi
],[])
fi
fi
LCMAPS_CFLAGS=[$LCMAPS_]translit($1,[a-z],[A-Z])[_INTERFACE_CFLAGS]
AC_SUBST([LCMAPS_]translit($1,[a-z],[A-Z])[_INTERFACE_CFLAGS])
AC_SUBST(LCMAPS_CFLAGS)
])
dnl $1 - full interface name
dnl $2 - header to test
AC_DEFUN([_AC_LCMAPS_DIRECT_CHECK_INTERFACE],
[
ac_save_CFLAGS=$CFLAGS
if test "x$ac_lcmaps_includes" != "x" ; then
ac_try_CFLAGS="-I$ac_lcmaps_includes"
AC_MSG_CHECKING(for $1 ($2) at system default and $ac_lcmaps_includes)
else
AC_MSG_CHECKING(for $1 ($2) at system default)
fi
dnl We want to add the cmdline specified CFLAGS, but only for dnl checking,
dnl not to the *_CFLAGS.
CFLAGS="$ac_try_CFLAGS $CFLAGS"
dnl Wether we check for old or new-style
ifelse([$1],[LCMAPS_INTERFACE],[
dnl Test we *don't* have the new interface
AC_COMPILE_IFELSE([AC_LANG_SOURCE( [#include
int main(void) {return 0;} ] )],
[ dnl We have the new-style interface and
dnl should NOT have tested LCMAPS_INTERFACE
have_mod=no
],[ dnl Test we have the old interface
ifelse([$2],[lcmaps_return_poolindex.h],[
CFLAGS="$GLOBUS_GSSAPI_GSI_CFLAGS $GLOBUS_GSSAPI_GSI_NOTHR_CFLAGS $CFLAGS"
],[])
AC_COMPILE_IFELSE([AC_LANG_SOURCE( [#include
int main(void) {return 0;} ] )],
[have_mod=yes], [have_mod=no])
])
AC_MSG_RESULT([$have_mod])
],[
dnl New style test
ifelse([$2],[lcmaps_globus.h],[
CFLAGS="$GLOBUS_GSSAPI_GSI_CFLAGS $GLOBUS_GSSAPI_GSI_NOTHR_CFLAGS $CFLAGS"
],[])
AC_COMPILE_IFELSE([AC_LANG_SOURCE( [#include
#ifndef LCMAPS_API_MAJOR_VERSION
#error LCMAPS API version is undefined, this should not happen for new-style interface
#endif
#if (LCMAPS_API_MAJOR_VERSION) < (]_AC_LCMAPS_MAJOR[) || \
( (LCMAPS_API_MAJOR_VERSION) == (]_AC_LCMAPS_MAJOR[) && \
( (LCMAPS_API_MINOR_VERSION) < (]_AC_LCMAPS_MINOR[) || \
( (LCMAPS_API_MINOR_VERSION) == (]_AC_LCMAPS_MINOR[) && \
(LCMAPS_API_PATCH_VERSION) < (]_AC_LCMAPS_PATCH[) ) ) )
#error LCMAPS API version older than ]_AC_LCMAPS_MAJOR[.]_AC_LCMAPS_MINOR[.]_AC_LCMAPS_PATCH[
#endif
int main(void) {return 0;} ] )],
[have_mod=yes], [have_mod=no])
AC_MSG_RESULT([$have_mod])
])
if test "x$have_mod" = "xyes" ; then
[$3]
$1_CFLAGS=$ac_try_CFLAGS
else
[$4]
$1_CFLAGS=""
fi
CFLAGS=$ac_save_CFLAGS
])
lcmaps-plugins-jobrep-1.5.7/project/ltsugar.m4 0000644 0001750 0000144 00000010453 14574774130 016266 0000000 0000000 # ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
#
# Copyright (C) 2004-2005, 2007-2008, 2011-2019, 2021-2022 Free Software
# Foundation, Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
# serial 6 ltsugar.m4
# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
# lt_join(SEP, ARG1, [ARG2...])
# -----------------------------
# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
# associated separator.
# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
# versions in m4sugar had bugs.
m4_define([lt_join],
[m4_if([$#], [1], [],
[$#], [2], [[$2]],
[m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
m4_define([_lt_join],
[m4_if([$#$2], [2], [],
[m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
# lt_car(LIST)
# lt_cdr(LIST)
# ------------
# Manipulate m4 lists.
# These macros are necessary as long as will still need to support
# Autoconf-2.59, which quotes differently.
m4_define([lt_car], [[$1]])
m4_define([lt_cdr],
[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
[$#], 1, [],
[m4_dquote(m4_shift($@))])])
m4_define([lt_unquote], $1)
# lt_append(MACRO-NAME, STRING, [SEPARATOR])
# ------------------------------------------
# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'.
# Note that neither SEPARATOR nor STRING are expanded; they are appended
# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
# No SEPARATOR is output if MACRO-NAME was previously undefined (different
# than defined and empty).
#
# This macro is needed until we can rely on Autoconf 2.62, since earlier
# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
m4_define([lt_append],
[m4_define([$1],
m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
# ----------------------------------------------------------
# Produce a SEP delimited list of all paired combinations of elements of
# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
# has the form PREFIXmINFIXSUFFIXn.
# Needed until we can rely on m4_combine added in Autoconf 2.62.
m4_define([lt_combine],
[m4_if(m4_eval([$# > 3]), [1],
[m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
[[m4_foreach([_Lt_prefix], [$2],
[m4_foreach([_Lt_suffix],
]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
# -----------------------------------------------------------------------
# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
m4_define([lt_if_append_uniq],
[m4_ifdef([$1],
[m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
[lt_append([$1], [$2], [$3])$4],
[$5])],
[lt_append([$1], [$2], [$3])$4])])
# lt_dict_add(DICT, KEY, VALUE)
# -----------------------------
m4_define([lt_dict_add],
[m4_define([$1($2)], [$3])])
# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
# --------------------------------------------
m4_define([lt_dict_add_subkey],
[m4_define([$1($2:$3)], [$4])])
# lt_dict_fetch(DICT, KEY, [SUBKEY])
# ----------------------------------
m4_define([lt_dict_fetch],
[m4_ifval([$3],
m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
# -----------------------------------------------------------------
m4_define([lt_if_dict_fetch],
[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
[$5],
[$6])])
# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
# --------------------------------------------------------------
m4_define([lt_dict_filter],
[m4_if([$5], [], [],
[lt_join(m4_quote(m4_default([$4], [[, ]])),
lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
[lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
])
lcmaps-plugins-jobrep-1.5.7/project/ltoptions.m4 0000644 0001750 0000144 00000034275 14574774130 016650 0000000 0000000 # Helper functions for option handling. -*- Autoconf -*-
#
# Copyright (C) 2004-2005, 2007-2009, 2011-2019, 2021-2022 Free
# Software Foundation, Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
# serial 8 ltoptions.m4
# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
# ------------------------------------------
m4_define([_LT_MANGLE_OPTION],
[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
# ---------------------------------------
# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
# matching handler defined, dispatch to it. Other OPTION-NAMEs are
# saved as a flag.
m4_define([_LT_SET_OPTION],
[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
_LT_MANGLE_DEFUN([$1], [$2]),
[m4_warning([Unknown $1 option '$2'])])[]dnl
])
# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
# ------------------------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
m4_define([_LT_IF_OPTION],
[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
# -------------------------------------------------------
# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
# are set.
m4_define([_LT_UNLESS_OPTIONS],
[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
[m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
[m4_define([$0_found])])])[]dnl
m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
])[]dnl
])
# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
# ----------------------------------------
# OPTION-LIST is a space-separated list of Libtool options associated
# with MACRO-NAME. If any OPTION has a matching handler declared with
# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
# the unknown option and exit.
m4_defun([_LT_SET_OPTIONS],
[# Set options
m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
[_LT_SET_OPTION([$1], _LT_Option)])
m4_if([$1],[LT_INIT],[
dnl
dnl Simply set some default values (i.e off) if boolean options were not
dnl specified:
_LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
])
_LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
])
dnl
dnl If no reference was made to various pairs of opposing options, then
dnl we run the default mode handler for the pair. For example, if neither
dnl 'shared' nor 'disable-shared' was passed, we enable building of shared
dnl archives by default:
_LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
_LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
_LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
_LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
[_LT_ENABLE_FAST_INSTALL])
_LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4],
[_LT_WITH_AIX_SONAME([aix])])
])
])# _LT_SET_OPTIONS
## --------------------------------- ##
## Macros to handle LT_INIT options. ##
## --------------------------------- ##
# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
# -----------------------------------------
m4_define([_LT_MANGLE_DEFUN],
[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
# -----------------------------------------------
m4_define([LT_OPTION_DEFINE],
[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
])# LT_OPTION_DEFINE
# dlopen
# ------
LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
])
AU_DEFUN([AC_LIBTOOL_DLOPEN],
[_LT_SET_OPTION([LT_INIT], [dlopen])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
put the 'dlopen' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
# win32-dll
# ---------
# Declare package support for building win32 dll's.
LT_OPTION_DEFINE([LT_INIT], [win32-dll],
[enable_win32_dll=yes
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
esac
test -z "$AS" && AS=as
_LT_DECL([], [AS], [1], [Assembler program])dnl
test -z "$DLLTOOL" && DLLTOOL=dlltool
_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
test -z "$OBJDUMP" && OBJDUMP=objdump
_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
])# win32-dll
AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
_LT_SET_OPTION([LT_INIT], [win32-dll])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
put the 'win32-dll' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
# _LT_ENABLE_SHARED([DEFAULT])
# ----------------------------
# implement the --enable-shared flag, and supports the 'shared' and
# 'disable-shared' LT_INIT options.
# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_SHARED],
[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([shared],
[AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
[p=${PACKAGE-default}
case $enableval in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS=$lt_save_ifs
;;
esac],
[enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
_LT_DECL([build_libtool_libs], [enable_shared], [0],
[Whether or not to build shared libraries])
])# _LT_ENABLE_SHARED
LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
# Old names:
AC_DEFUN([AC_ENABLE_SHARED],
[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
])
AC_DEFUN([AC_DISABLE_SHARED],
[_LT_SET_OPTION([LT_INIT], [disable-shared])
])
AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AM_ENABLE_SHARED], [])
dnl AC_DEFUN([AM_DISABLE_SHARED], [])
# _LT_ENABLE_STATIC([DEFAULT])
# ----------------------------
# implement the --enable-static flag, and support the 'static' and
# 'disable-static' LT_INIT options.
# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_STATIC],
[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([static],
[AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
[p=${PACKAGE-default}
case $enableval in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS=$lt_save_ifs
;;
esac],
[enable_static=]_LT_ENABLE_STATIC_DEFAULT)
_LT_DECL([build_old_libs], [enable_static], [0],
[Whether or not to build static libraries])
])# _LT_ENABLE_STATIC
LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
# Old names:
AC_DEFUN([AC_ENABLE_STATIC],
[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
])
AC_DEFUN([AC_DISABLE_STATIC],
[_LT_SET_OPTION([LT_INIT], [disable-static])
])
AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AM_ENABLE_STATIC], [])
dnl AC_DEFUN([AM_DISABLE_STATIC], [])
# _LT_ENABLE_FAST_INSTALL([DEFAULT])
# ----------------------------------
# implement the --enable-fast-install flag, and support the 'fast-install'
# and 'disable-fast-install' LT_INIT options.
# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_FAST_INSTALL],
[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([fast-install],
[AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
[optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
[p=${PACKAGE-default}
case $enableval in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS=$lt_save_ifs
;;
esac],
[enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
_LT_DECL([fast_install], [enable_fast_install], [0],
[Whether or not to optimize for fast installation])dnl
])# _LT_ENABLE_FAST_INSTALL
LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
# Old names:
AU_DEFUN([AC_ENABLE_FAST_INSTALL],
[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
the 'fast-install' option into LT_INIT's first parameter.])
])
AU_DEFUN([AC_DISABLE_FAST_INSTALL],
[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
the 'disable-fast-install' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
# _LT_WITH_AIX_SONAME([DEFAULT])
# ----------------------------------
# implement the --with-aix-soname flag, and support the `aix-soname=aix'
# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT
# is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'.
m4_define([_LT_WITH_AIX_SONAME],
[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl
shared_archive_member_spec=
case $host,$enable_shared in
power*-*-aix[[5-9]]*,yes)
AC_MSG_CHECKING([which variant of shared library versioning to provide])
AC_ARG_WITH([aix-soname],
[AS_HELP_STRING([--with-aix-soname=aix|svr4|both],
[shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])],
[case $withval in
aix|svr4|both)
;;
*)
AC_MSG_ERROR([Unknown argument to --with-aix-soname])
;;
esac
lt_cv_with_aix_soname=$with_aix_soname],
[AC_CACHE_VAL([lt_cv_with_aix_soname],
[lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT)
with_aix_soname=$lt_cv_with_aix_soname])
AC_MSG_RESULT([$with_aix_soname])
if test aix != "$with_aix_soname"; then
# For the AIX way of multilib, we name the shared archive member
# based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
# and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
# Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
# the AIX toolchain works better with OBJECT_MODE set (default 32).
if test 64 = "${OBJECT_MODE-32}"; then
shared_archive_member_spec=shr_64
else
shared_archive_member_spec=shr
fi
fi
;;
*)
with_aix_soname=aix
;;
esac
_LT_DECL([], [shared_archive_member_spec], [0],
[Shared archive member basename, for filename based shared library versioning on AIX])dnl
])# _LT_WITH_AIX_SONAME
LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])])
LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])])
LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])])
# _LT_WITH_PIC([MODE])
# --------------------
# implement the --with-pic flag, and support the 'pic-only' and 'no-pic'
# LT_INIT options.
# MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'.
m4_define([_LT_WITH_PIC],
[AC_ARG_WITH([pic],
[AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
[lt_p=${PACKAGE-default}
case $withval in
yes|no) pic_mode=$withval ;;
*)
pic_mode=default
# Look at the argument we got. We use all the common list separators.
lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for lt_pkg in $withval; do
IFS=$lt_save_ifs
if test "X$lt_pkg" = "X$lt_p"; then
pic_mode=yes
fi
done
IFS=$lt_save_ifs
;;
esac],
[pic_mode=m4_default([$1], [default])])
_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
])# _LT_WITH_PIC
LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
# Old name:
AU_DEFUN([AC_LIBTOOL_PICMODE],
[_LT_SET_OPTION([LT_INIT], [pic-only])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
put the 'pic-only' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
## ----------------- ##
## LTDL_INIT Options ##
## ----------------- ##
m4_define([_LTDL_MODE], [])
LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
[m4_define([_LTDL_MODE], [nonrecursive])])
LT_OPTION_DEFINE([LTDL_INIT], [recursive],
[m4_define([_LTDL_MODE], [recursive])])
LT_OPTION_DEFINE([LTDL_INIT], [subproject],
[m4_define([_LTDL_MODE], [subproject])])
m4_define([_LTDL_TYPE], [])
LT_OPTION_DEFINE([LTDL_INIT], [installable],
[m4_define([_LTDL_TYPE], [installable])])
LT_OPTION_DEFINE([LTDL_INIT], [convenience],
[m4_define([_LTDL_TYPE], [convenience])])
lcmaps-plugins-jobrep-1.5.7/project/ltversion.m4 0000644 0001750 0000144 00000001312 14574774130 016624 0000000 0000000 # ltversion.m4 -- version numbers -*- Autoconf -*-
#
# Copyright (C) 2004, 2011-2019, 2021-2022 Free Software Foundation,
# Inc.
# Written by Scott James Remnant, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
# @configure_input@
# serial 4245 ltversion.m4
# This file is part of GNU Libtool
m4_define([LT_PACKAGE_VERSION], [2.4.7])
m4_define([LT_PACKAGE_REVISION], [2.4.7])
AC_DEFUN([LTVERSION_VERSION],
[macro_version='2.4.7'
macro_revision='2.4.7'
_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
_LT_DECL(, macro_revision, 0)
])
lcmaps-plugins-jobrep-1.5.7/src/ 0000755 0001750 0000144 00000000000 14574774166 013552 5 0000000 0000000 lcmaps-plugins-jobrep-1.5.7/src/lcmaps_jobrep_config.h.in 0000644 0001750 0000144 00000005613 14574774131 020412 0000000 0000000 /* src/lcmaps_jobrep_config.h.in. Generated from configure.ac by autoheader. */
/* Define to 1 if you have the header file. */
#undef HAVE_DLFCN_H
/* Define to 1 if you have the header file. */
#undef HAVE_INTTYPES_H
/* Define to 1 if you have the header
file. */
#undef HAVE_LCMAPS_LCMAPS_PLUGIN_PROTOTYPES_H
/* Define to 1 if you have the `crypto' library (-lcrypto). */
#undef HAVE_LIBCRYPTO
/* Define to 1 if you have the `odbc' library (-lodbc). */
#undef HAVE_LIBODBC
/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
to 0 otherwise. */
#undef HAVE_MALLOC
/* Define to 1 if your system has a GNU libc compatible `realloc' function,
and to 0 otherwise. */
#undef HAVE_REALLOC
/* Define to 1 if you have the `setenv' function. */
#undef HAVE_SETENV
/* Define to 1 if you have the header file. */
#undef HAVE_SQLEXT_H
/* Define to 1 if you have the header file. */
#undef HAVE_SQLTYPES_H
/* Define to 1 if you have the header file. */
#undef HAVE_SQL_H
/* Define to 1 if you have the header file. */
#undef HAVE_STDINT_H
/* Define to 1 if you have the header file. */
#undef HAVE_STDIO_H
/* Define to 1 if you have the header file. */
#undef HAVE_STDLIB_H
/* Define to 1 if you have the `strdup' function. */
#undef HAVE_STRDUP
/* Define to 1 if you have the header file. */
#undef HAVE_STRINGS_H
/* Define to 1 if you have the header file. */
#undef HAVE_STRING_H
/* Define to 1 if you have the header file. */
#undef HAVE_SYS_STAT_H
/* Define to 1 if you have the header file. */
#undef HAVE_SYS_TYPES_H
/* Define to 1 if you have the header file. */
#undef HAVE_UNISTD_H
/* Define to the sub-directory where libtool stores uninstalled libraries. */
#undef LT_OBJDIR
/* Name of package */
#undef PACKAGE
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
/* Define to the full name of this package. */
#undef PACKAGE_NAME
/* Define to the full name and version of this package. */
#undef PACKAGE_STRING
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
/* Define to the home page for this package. */
#undef PACKAGE_URL
/* Define to the version of this package. */
#undef PACKAGE_VERSION
/* Define to 1 if all of the C90 standard headers exist (not just the ones
required in a freestanding environment). This macro is provided for
backward compatibility; new code need not use it. */
#undef STDC_HEADERS
/* Version number of package */
#undef VERSION
/* Define to rpl_malloc if the replacement function should be used. */
#undef malloc
/* Define to rpl_realloc if the replacement function should be used. */
#undef realloc
/* Define to `unsigned int' if does not define. */
#undef size_t
lcmaps-plugins-jobrep-1.5.7/src/jobrep/ 0000755 0001750 0000144 00000000000 14574774166 015033 5 0000000 0000000 lcmaps-plugins-jobrep-1.5.7/src/jobrep/jobrep_data_handling.h 0000644 0001750 0000144 00000005163 14574533163 021235 0000000 0000000 /*
* Copyright (c) Members of the IGE Project. 2012.
* See http://ige-project.eu for details on the copyright holders.
* For license conditions see the license file or
*/
#ifndef JOBREP_DATA_HANDLING_H
#define JOBREP_DATA_HANDLING_H
/*****************************************************************************
Include header files
******************************************************************************/
#include "jobrep_odbc_api.h"
#include
#include
/*****************************************************************************
Prototypes
******************************************************************************/
long jobrep_create_effective_credentials_main(struct jr_db_handle_s *db_handle);
int jobrep_push_compute_job_info(struct jr_db_handle_s *db_handle, long eff_cred_id, char *gatekeeper_jm_id);
int jobrep_get_voms_fqan_id_for_fqan(struct jr_db_handle_s *db_handle, char *voms_fqan);
int jobrep_push_unix_gid_voms_fqans(struct jr_db_handle_s *db_handle);
/* Next function is not used, commenting out */
/*int jobrep_get_unix_uid_id_from_uid(struct jr_db_handle_s *db_handle, uid_t uid, char *uid_name);*/
long jobrep_get_unix_gid_id_from_gid(struct jr_db_handle_s *db_handle, gid_t gid, char *gid_name);
long jobrep_get_voms_fqan_id_from_fqan(struct jr_db_handle_s *db_handle, char *voms_fqan);
long jobrep_insert_unix_uid_voms_fqans(struct jr_db_handle_s *db_handle, long voms_fqan_id, long unix_uid_id);
long jobrep_insert_unix_gid_voms_fqans(struct jr_db_handle_s *db_handle, long voms_fqan_id, long unix_gid_id, int is_primary);
int jobrep_push_voms_fqans(struct jr_db_handle_s *db_handle, long eff_cred_id);
int jobrep_push_effective_credential_unix_uid(struct jr_db_handle_s *db_handle, long unix_uid_id, long eff_cred_id);
int jobrep_push_effective_credential_unix_gid(struct jr_db_handle_s *db_handle, long unix_gid_id, long eff_cred_id, int is_primary);
int jobrep_push_effective_credential_unix_gids(struct jr_db_handle_s *db_handle, long eff_cred_id);
int jobrep_push_effective_credential_user(struct jr_db_handle_s *db_handle, long user_id, long eff_cred_id);
long jobrep_assign_userid(struct jr_db_handle_s *db_handle, STACK_OF(X509) *px509_chain, char *eec_subject_dn);
long jobrep_push_unix_cred(struct jr_db_handle_s *db_handle);
int jobrep_push_certificates(struct jr_db_handle_s *db_handle, STACK_OF(X509) *px509_chain);
char *jobrep_get_serialnumber_as_string(X509 *cert);
char *jobrep_time_to_string(time_t some_time);
time_t jobrep_asn1TimeToTimeT(unsigned char *asn1time, size_t len);
#endif /* JOBREP_DATA_HANDLING_H */
lcmaps-plugins-jobrep-1.5.7/src/jobrep/jobrep_test.c 0000644 0001750 0000144 00000011574 14574533163 017435 0000000 0000000 /*
* Copyright (c) Members of the EGEE Collaboration. 2004.
* See http://eu-egee.org/partners/ for details on the copyright holders.
* For license conditions see the license file or
* http://eu-egee.org/license.html
*/
#define _XOPEN_SOURCE 600
/* LCMAPS includes */
#include
#include
/*#include "../../src/pluginmanager/_lcmaps_log.h"*/
#include
/*#include "../../src/pluginmanager/_lcmaps_cred_data.h"*/
#include
#include
#include
#include "jobrep_test.h"
#include
#include
#include
#define DO_USRLOG ((unsigned short)0x0001) /*!< flag to indicate that
user logging has to be done \internal */
#define DO_SYSLOG ((unsigned short)0x0002) /*!< flag to indicate that
syslogging has to be done \internal */
#define USE_VOMS_TEST_PROXY 1
#if USE_VOMS_TEST_PROXY
static gss_cred_id_t credential_handle = GSS_C_NO_CREDENTIAL;
#endif
int main()
{
int argc;
char * username = "okoeroo";
char * job_request = "JOBREQUEST \" blabla \", dkdkdka";
struct passwd *user_info = NULL;
int i = 0;
/* int cnt_sec_gid = 0; */
gid_t sec_gid = 0;
lcmaps_argument_t *args = NULL;
char *init_argv[] = {"voms.mod", "-vomsdir", "/etc/grid-security", "-certdir", "/etc/grid-security/certificates",
// "DSN=jobrep", "HOST=tbn13.nikhef.nl", "USER=root", "PASS=nikhef"};
"HOST=tbn13.nikhef.nl", "USER=lcmaps_jobrep", "PASS=jobrep_lcmaps", "DRIVER=/usr/local/lib/libmyodbc3.so"};
char *user_dn = "/O=dutchgrid/O=users/O=nikhef/CN=Oscar Koeroo";
setenv("X509_USER_PROXY","/tmp/x509up_u505",1); // okoeroo
// char *user_dn = "/O=dutchgrid/O=users/O=nikhef/CN=Martijn Steenbakkers";
// setenv("X509_USER_PROXY","/home/okoeroo/x509up_u500",1); // martijn
// char *user_dn = "/O=dutchgrid/O=users/O=nikhef/CN=Gerben Michiel Venekamp";
// setenv("X509_USER_PROXY","/home/okoeroo/x509up_u506",1); // venekamp
if (lcmaps_log_open(NULL,stdout,DO_USRLOG)) return 1;
lcmaps_log_debug(0,"\n");
lcmaps_log(LOG_NOTICE,"Initialization test\n");
#if USE_VOMS_TEST_PROXY
{
OM_uint32 major_status;
OM_uint32 minor_status;
major_status = globus_gss_assist_acquire_cred(&minor_status,
GSS_C_INITIATE, /* or GSS_C_ACCEPT */
&credential_handle);
if (major_status != GSS_S_COMPLETE)
{
globus_gss_assist_display_status(stderr,
"Some failure message here",
major_status,
minor_status,
0);
return 1;
}
}
#endif
user_info = getpwnam(username);
addCredentialData(UID, &(user_info->pw_uid));
addCredentialData(PRI_GID, &(user_info->pw_gid));
/*
* Retrieve secondary group id's
*/
sec_gid = (user_info->pw_gid);
for (i = 0; i < 10; i++)
{
addCredentialData(SEC_GID, &sec_gid);
sec_gid++;
}
plugin_initialize(9, init_argv);
plugin_introspect(&argc, &args);
if (lcmaps_setArgValue("job_request", "char *", (void *) &job_request, argc, &args) != 0)
{
lcmaps_log(0,
"lcmaps.mod-runPluginManager(): could not SET requested variable \"%s\" of type \"%s\" for plugin \"%s\"\n",
"job_request", "char *", "jobrepository");
return 1;
}
if (lcmaps_setArgValue("user_dn", "char *", (void *) &user_dn, argc, &args) != 0)
{
lcmaps_log(0,
"lcmaps.mod-runPluginManager(): could not SET requested variable \"%s\" of type \"%s\" for plugin \"%s\"\n",
"user_dn", "char *", "jobrep");
return 1;
}
if (lcmaps_setArgValue("user_cred", "gss_cred_id_t", (void *) &credential_handle, argc, &args) != 0)
{
lcmaps_log(0,
"lcmaps.mod-runPluginManager(): could not SET requested variable \"%s\" of type \"%s\" for plugin \"%s\"\n",
"user_cred", "gss_cred_id_t", "jobrep");
return 1;
}
plugin_run(argc,args);
// printCredData();
if (lcmaps_cleanCredentialData()!=0)
{
lcmaps_log(0,"lcmaps.mod-stopPluginManager() error: could not clean credential data list\n");
return 1;
}
plugin_terminate();
return 0;
}
lcmaps-plugins-jobrep-1.5.7/src/jobrep/jobrep_data_handling.c 0000644 0001750 0000144 00000156560 14574533163 021240 0000000 0000000 /*
* Copyright (c) Members of the IGE Project. 2012.
* See http://ige-project.eu for details on the copyright holders.
* For license conditions see the license file or
*/
#define _XOPEN_SOURCE 600
/*****************************************************************************
Include header files
******************************************************************************/
#include "jobrep_data_handling.h"
#include
#include
#include
#include
#include
#include
#include
#include
#include
/*****************************************************************************/
/* Check if certificate can be used as a CA to sign standard X509 certs */
/* Return 1 if true; 0 if not. */
static int
jobrep_grid_x509IsCA(X509 *cert) {
int idret;
/* final argument to X509_check_purpose() is whether to check for CAness */
idret = X509_check_purpose(cert, X509_PURPOSE_SSL_CLIENT, 1);
if (idret == 1)
return 1;
return 0;
}
long
jobrep_assign_userid(struct jr_db_handle_s *db_handle, STACK_OF(X509) *px509_chain, char *eec_subject_dn) {
long user_id = -1;
long cert_id = -1;
int i = 0, depth = 0;
int found = 0;
char *subject_DN = NULL, *issuer_DN = NULL;
X509 *cert = NULL;
if ((db_handle == NULL) || (px509_chain == NULL) || (eec_subject_dn == NULL)) {
return -1;
}
depth = sk_X509_num(px509_chain);
for (i = 0; i < depth; i++) {
if ((cert = sk_X509_value(px509_chain, i))) {
subject_DN = X509_NAME_oneline(X509_get_subject_name(cert),NULL,0);
if (subject_DN == NULL) {
lcmaps_log(LOG_INFO, "%s: No Subject DN found in the certificate.\n", __func__);
goto fail_jobrep;
}
/* Match the EEC or try to find it */
if (strcmp(subject_DN, eec_subject_dn) != 0) {
free(subject_DN);
subject_DN = NULL;
continue;
}
/* Found */
found = 1;
/* Find the matching issuer_DN */
issuer_DN = X509_NAME_oneline(X509_get_issuer_name(cert),NULL,0);
if (issuer_DN == NULL) {
lcmaps_log(LOG_INFO, "%s: No Issuer DN found in the certificate.\n", __func__);
goto fail_jobrep;
}
break;
}
}
if (!found) {
lcmaps_log(LOG_ERR,
"%s: Discovered a bug! The EEC Subject DN from LCMAPS is not found in the provided certificate chain.\n",
__func__);
goto fail_jobrep;
}
/*** Query for the certificate id ***/
if (SQL_Prepare(db_handle,
(unsigned char *)"select cert_id from certificates where subject = ? and issuer = ?") < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to prepare a query to select the cert_id from a subject and issuer DN\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_CHAR, SQL_VARCHAR, subject_DN) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Subject DN value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_CHAR, SQL_VARCHAR, issuer_DN) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Issuer DN value to the query\n", __func__);
goto fail_jobrep;
}
/* The UNIQUE statement in the DB will purposely cast an error. This query is very unlikely to fail */
SQL_Query(db_handle);
/* Read the ResultSet - On existence, expecting 1 TField as result, type SQL_C_LONG */
if ((db_handle->resultset->rowCnt <= 0) || (db_handle->resultset->colCnt <= 0)) {
lcmaps_log(LOG_ERR, "%s: No results from the query to select the cert_id from a subject and issuer DN from certificates.\n", __func__);
goto fail_jobrep;
} else if ((db_handle->resultset->rowCnt > 1) || (db_handle->resultset->colCnt > 1)) {
lcmaps_log(LOG_ERR, "%s: Too many results returned. Either the query got executed wrongly or the database integrity is compromised. Check if the certificates tables has the proper UNIQUE() index statements set.\n", __func__);
goto fail_jobrep;
}
/* One result please, only one */
if (db_handle->resultset->data[0][0].type != SQL_C_LONG) {
lcmaps_log(LOG_ERR, "%s: result for the \"cert_id\" provided in the wrong datatype. Expected SQL_C_LONG (and equivalent)\n",
__func__);
goto fail_jobrep;
}
/* Store the cert_id */
cert_id = db_handle->resultset->data[0][0].v.v_long;
/* Clean up */
SQL_QueryCloseAndClean(db_handle);
/*** Insert the cert_id ***/
if (SQL_Prepare(db_handle,
(unsigned char *)"insert into users (cert_id) values (?)") < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to prepare a query to insert cert_id into \"users\"\n", __func__);
goto fail_jobrep;
}
/* Bind data to Query */
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_LONG, SQL_INTEGER, &cert_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the \"cert_id\" value to the query\n", __func__);
goto fail_jobrep;
}
/* This insert would fail if it already exists. Which wouldn't hurt if it failed */
SQL_IgnoreErrors_Set(db_handle);
SQL_Exec(db_handle);
/* Clean up */
SQL_QueryCloseAndClean(db_handle);
/*** Query for the user id ***/
if (SQL_Prepare(db_handle,
(unsigned char *)"select user_id from users where cert_id = ?") < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to prepare a query to select the user_id from a cert_id\n", __func__);
goto fail_jobrep;
}
/* Bind data to Query */
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_LONG, SQL_INTEGER, &cert_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the \"cert_id\" value to the query\n", __func__);
goto fail_jobrep;
}
/* The UNIQUE statement in the DB will purposely cast an error. This query is very unlikely to fail */
SQL_Query(db_handle);
/* Read the ResultSet - On existence, expecting 1 TField as result, type SQL_C_LONG */
if ((db_handle->resultset->rowCnt <= 0) || (db_handle->resultset->colCnt <= 0)) {
lcmaps_log(LOG_ERR, "%s: No results from the query to select the user_id from a cert_id from \"users\".\n", __func__);
goto fail_jobrep;
} else if ((db_handle->resultset->rowCnt > 1) || (db_handle->resultset->colCnt > 1)) {
lcmaps_log(LOG_ERR, "%s: Too many results returned. Either the query got executed wrongly or the database integrity is compromised. Check if the certificates tables has the proper UNIQUE() index statements set.\n", __func__);
goto fail_jobrep;
}
/* One result please, only one */
if (db_handle->resultset->data[0][0].type != SQL_C_LONG) {
lcmaps_log(LOG_ERR, "%s: result for the \"user_id\" provided in the wrong datatype. Expected SQL_C_LONG (and equivalent)\n",
__func__);
goto fail_jobrep;
}
/* Store the user_id */
user_id = db_handle->resultset->data[0][0].v.v_long;
/* Done, need to clean up */
fail_jobrep:
SQL_QueryCloseAndClean(db_handle);
if (subject_DN) free(subject_DN);
if (issuer_DN) free(issuer_DN);
return user_id;
}
int
jobrep_push_unix_gid_voms_fqans(struct jr_db_handle_s *db_handle) {
int i = 0;
lcmaps_vo_mapping_t *vo_mapping = NULL;
int cnt_vo_mapping = 0;
if (db_handle == NULL) {
return -1;
}
/* VO information */
vo_mapping = getCredentialData(LCMAPS_VO_CRED_MAPPING, &cnt_vo_mapping);
for (i = 0; i < cnt_vo_mapping; i++) {
/* Select existing record of the FQAN */
/* lcmaps_log_debug (4, "FQAN[%d]: %s, %d(%s)\n", i, vo_mapping[i].vostring, vo_mapping[i].gid, vo_mapping[i].groupname); */
if (SQL_Prepare(db_handle, (unsigned char *)"insert into voms_fqans (fqan) values (?)") < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to Prepare the query to insert into the voms_fqans\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_CHAR, SQL_VARCHAR, vo_mapping[i].vostring) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Subject DN value to the query\n", __func__);
goto fail_jobrep;
}
/* The UNIQUE statement in the DB will purposely cast an error. This query is very unlikely to fail */
SQL_IgnoreErrors_Set(db_handle);
SQL_Exec(db_handle);
}
return 0;
fail_jobrep:
return -1;
}
long
jobrep_get_voms_fqan_id_from_fqan(struct jr_db_handle_s *db_handle, char *voms_fqan) {
long voms_fqan_id = -1;
SQLRETURN ret;
if ((db_handle == NULL) || (voms_fqan == NULL)) {
return -1;
}
/*** Query for the certificate id ***/
if (SQL_Prepare(db_handle,
(unsigned char *)"select voms_fqan_id from voms_fqans where fqan = ?") < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to prepare a query to select the voms_fqan_id from the voms_fqans\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_CHAR, SQL_VARCHAR, voms_fqan) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the VOMS FQAN value to the query\n", __func__);
goto fail_jobrep;
}
/* The VOMS FQAN must exist in the database! */
ret=SQL_Query(db_handle);
if (!SQL_SUCCEEDED(ret)) {
lcmaps_log(LOG_ERR, "%s: Failed to execute the query to fetch the voms_fqan_id from the voms_fqans.\n", __func__);
goto fail_jobrep;
}
/* Read the ResultSet - On existence, expecting 1 TField as result, type SQL_C_LONG */
if ((db_handle->resultset->rowCnt <= 0) || (db_handle->resultset->colCnt <= 0)) {
lcmaps_log(LOG_ERR, "%s: No results from the query to select the voms_fqan_id from the voms_fqans.\n", __func__);
goto fail_jobrep;
} else if ((db_handle->resultset->rowCnt > 1) || (db_handle->resultset->colCnt > 1)) {
lcmaps_log(LOG_ERR, "%s: Too many results returned. Either the query got executed wrongly or the database integrity is compromised. Check if the certificates tables has the proper UNIQUE() index statements set.\n", __func__);
goto fail_jobrep;
}
/* One result please, only one */
if (db_handle->resultset->data[0][0].type != SQL_C_LONG) {
lcmaps_log(LOG_ERR, "%s: result for the \"voms_fqan_id\" provided in the wrong datatype. Expected SQL_C_LONG (and equivalent)\n",
__func__);
goto fail_jobrep;
}
/* Store the voms_fqan_id */
voms_fqan_id = db_handle->resultset->data[0][0].v.v_long;
fail_jobrep:
/* Clean up */
SQL_QueryCloseAndClean(db_handle);
return voms_fqan_id;
}
/* Next function is not used, commenting out */
#if 0
int
jobrep_get_unix_uid_id_from_uid(struct jr_db_handle_s *db_handle, uid_t uid, char *uid_name) {
long unix_uid_id = -1;
SQLRETURN ret;
if (db_handle == NULL) {
return -1;
}
if (SQL_Prepare(db_handle,
(unsigned char *)"select unix_uid_id from unix_uids where uid = ? and uid_name = ?") < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to prepare a query to select the unix_uid_id from the unix_uids\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, 1, SQL_C_LONG, SQL_INTEGER, &uid) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Unix UID value to the query\n", __func__);
goto fail_jobrep;
}
if (uid_name == NULL) {
if (SQL_BindParam(db_handle, 2, SQL_C_CHAR, SQL_VARCHAR, "NULL") < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Unix UID value to the query\n", __func__);
goto fail_jobrep;
}
} else {
if (SQL_BindParam(db_handle, 2, SQL_C_CHAR, SQL_VARCHAR, uid_name) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Unix UID value to the query\n", __func__);
goto fail_jobrep;
}
}
/* The (Unix) UID must exist in the database! */
ret=SQL_Query(db_handle);
if (!SQL_SUCCEEDED(ret)) {
lcmaps_log(LOG_ERR, "%s: Failed to execute the query to fetch the unix_uid_id from the unix_uids.\n", __func__);
goto fail_jobrep;
}
/* Read the ResultSet - On existence, expecting 1 TField as result, type SQL_C_LONG */
if ((db_handle->resultset->rowCnt <= 0) || (db_handle->resultset->colCnt <= 0)) {
lcmaps_log(LOG_ERR, "%s: No results from the query to select the unix_uid_id from the unix_uids.\n", __func__);
goto fail_jobrep;
} else if ((db_handle->resultset->rowCnt > 1) || (db_handle->resultset->colCnt > 1)) {
lcmaps_log(LOG_ERR, "%s: Too many results returned. Either the query got executed wrongly or the database integrity is compromised. Check if the certificates tables has the proper UNIQUE() index statements set.\n", __func__);
goto fail_jobrep;
}
/* One result please, only one */
if (db_handle->resultset->data[0][0].type != SQL_C_LONG) {
lcmaps_log(LOG_ERR, "%s: result for the \"unix_uid_id\" provided in the wrong datatype. Expected SQL_C_LONG (and equivalent)\n",
__func__);
goto fail_jobrep;
}
/* Store the voms_fqan_id */
unix_uid_id = db_handle->resultset->data[0][0].v.v_long;
fail_jobrep:
/* Clean up */
SQL_QueryCloseAndClean(db_handle);
return unix_uid_id;
}
#endif
long
jobrep_get_unix_gid_id_from_gid(struct jr_db_handle_s *db_handle, gid_t gid, char *gid_name) {
long unix_gid_id = -1;
SQLRETURN ret;
char emptyname[5];
strncpy(emptyname,"NULL",5);
if (db_handle == NULL) {
return -1;
}
if (SQL_Prepare(db_handle,
(unsigned char *)"select unix_gid_id from unix_gids where gid = ? and gid_name = ?") < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to prepare a query to select the unix_gid_id from the unix_gids\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_LONG, SQL_INTEGER, &gid) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Unix GID value to the query\n", __func__);
goto fail_jobrep;
}
if (gid_name == NULL) {
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_CHAR, SQL_VARCHAR, emptyname) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Unix GID value to the query\n", __func__);
goto fail_jobrep;
}
} else {
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_CHAR, SQL_VARCHAR, gid_name) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Unix GID value to the query\n", __func__);
goto fail_jobrep;
}
}
/* The (Unix) GID must exist in the database! */
ret=SQL_Query(db_handle);
if (!SQL_SUCCEEDED(ret)) {
lcmaps_log(LOG_ERR, "%s: Failed to execute the query to fetch the unix_gid_id from the unix_gids.\n", __func__);
goto fail_jobrep;
}
/* Read the ResultSet - On existence, expecting 1 TField as result, type SQL_C_LONG */
if ((db_handle->resultset->rowCnt <= 0) || (db_handle->resultset->colCnt <= 0)) {
lcmaps_log(LOG_ERR, "%s: No results from the query to select the unix_gid_id from the unix_gids.\n", __func__);
goto fail_jobrep;
} else if ((db_handle->resultset->rowCnt > 1) || (db_handle->resultset->colCnt > 1)) {
lcmaps_log(LOG_ERR, "%s: Too many results returned. Either the query got executed wrongly or the database integrity is compromised. Check if the certificates tables has the proper UNIQUE() index statements set.\n", __func__);
goto fail_jobrep;
}
/* One result please, only one */
if (db_handle->resultset->data[0][0].type != SQL_C_LONG) {
lcmaps_log(LOG_ERR, "%s: result for the \"unix_gid_id\" provided in the wrong datatype. Expected SQL_C_LONG (and equivalent)\n",
__func__);
goto fail_jobrep;
}
/* Store the voms_fqan_id */
unix_gid_id = db_handle->resultset->data[0][0].v.v_long;
fail_jobrep:
/* Clean up */
SQL_QueryCloseAndClean(db_handle);
return unix_gid_id;
}
long
jobrep_insert_unix_uid_voms_fqans(struct jr_db_handle_s *db_handle, long voms_fqan_id, long unix_uid_id) {
char *reg_datetime = NULL;
long unix_uid_voms_fqan_id = -1;
if ((db_handle == NULL) || (voms_fqan_id < 0) || (unix_uid_id < 0)) {
return -1;
}
/* Insert the Unix GID to FQAN binding */
if (SQL_Prepare(db_handle,
(unsigned char *)"insert into unix_uid_voms_fqans (registration_datetime, unix_uid_id, voms_fqan_id)" \
" values (?, ?, ?)") < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to Prepare the query to insert into the unix_uid_voms_fqans\n", __func__);
goto fail_jobrep;
}
reg_datetime = jobrep_time_to_string(time(NULL));
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_CHAR, SQL_VARCHAR, reg_datetime) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Registration DateTime value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_LONG, SQL_INTEGER, &unix_uid_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Unix GID ID value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)3, SQL_C_LONG, SQL_INTEGER, &voms_fqan_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the VOMS FQAN ID value to the query\n", __func__);
goto fail_jobrep;
}
SQL_IgnoreErrors_Set(db_handle);
SQL_Exec(db_handle);
/* Get the primary key for the values just entered */
if (SQL_Prepare(db_handle,
(unsigned char *)"select unix_uid_voms_fqan_id from unix_uid_voms_fqans" \
" where unix_uid_id = ? and voms_fqan_id = ?") < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to Prepare the query to select the unix_uid_voms_fqan_id\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_LONG, SQL_INTEGER, &unix_uid_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Unix GID ID value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_LONG, SQL_INTEGER, &voms_fqan_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the VOMS FQAN ID value to the query\n", __func__);
goto fail_jobrep;
}
SQL_Query(db_handle);
/* Read the ResultSet - On existence, expecting 1 TField as result, type SQL_C_LONG */
if ((db_handle->resultset->rowCnt <= 0) || (db_handle->resultset->colCnt <= 0)) {
lcmaps_log(LOG_ERR, "%s: No results from the query to select the unix_uid_voms_fqan_id from unix_uid_voms_fqans.\n", __func__);
goto fail_jobrep;
} else if ((db_handle->resultset->rowCnt > 1) || (db_handle->resultset->colCnt > 1)) {
lcmaps_log(LOG_ERR, "%s: Too many results returned. Either the query got executed wrongly or the database integrity is compromised. Check if the certificates tables has the proper UNIQUE() index statements set.\n", __func__);
goto fail_jobrep;
}
/* One result please, only one */
if (db_handle->resultset->data[0][0].type != SQL_C_LONG) {
lcmaps_log(LOG_ERR, "%s: result for the \"unix_uid_voms_fqan_id\" provided in the wrong datatype. Expected SQL_C_LONG (and equivalent)\n",
__func__);
goto fail_jobrep;
}
/* Store the cert_id */
unix_uid_voms_fqan_id = db_handle->resultset->data[0][0].v.v_long;
/* Clean up */
SQL_QueryCloseAndClean(db_handle);
if (reg_datetime) free(reg_datetime);
return unix_uid_voms_fqan_id;
fail_jobrep:
if (reg_datetime) free(reg_datetime);
return -1;
}
long
jobrep_insert_unix_gid_voms_fqans(struct jr_db_handle_s *db_handle, long voms_fqan_id, long unix_gid_id, int is_primary) {
char *reg_datetime = NULL;
long unix_gid_voms_fqan_id = -1;
if ((db_handle == NULL) || (voms_fqan_id < 0) || (unix_gid_id < 0)) {
return -1;
}
/* Insert the Unix GID to FQAN binding */
if (SQL_Prepare(db_handle,
(unsigned char *)"insert into unix_gid_voms_fqans (registration_datetime, unix_gid_id, voms_fqan_id, is_primary)" \
" values (?, ?, ?, ?)") < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to Prepare the query to insert into the unix_gid_voms_fqans\n", __func__);
goto fail_jobrep;
}
reg_datetime = jobrep_time_to_string(time(NULL));
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_CHAR, SQL_VARCHAR, reg_datetime) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Registration DateTime value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_LONG, SQL_INTEGER, &unix_gid_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Unix GID ID value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)3, SQL_C_LONG, SQL_INTEGER, &voms_fqan_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the VOMS FQAN ID value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)4, SQL_C_LONG, SQL_INTEGER, &is_primary) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Registration DateTime value to the query\n", __func__);
goto fail_jobrep;
}
SQL_IgnoreErrors_Set(db_handle);
SQL_Exec(db_handle);
/* Get the primary key for the values just entered */
if (SQL_Prepare(db_handle,
(unsigned char *)"select unix_gid_voms_fqan_id from unix_gid_voms_fqans" \
" where unix_gid_id = ? and voms_fqan_id = ? and is_primary = ?") < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to Prepare the query to select the unix_gid_voms_fqan_id\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_LONG, SQL_INTEGER, &unix_gid_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Unix GID ID value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_LONG, SQL_INTEGER, &voms_fqan_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the VOMS FQAN ID value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)3, SQL_C_LONG, SQL_INTEGER, &is_primary) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Registration DateTime value to the query\n", __func__);
goto fail_jobrep;
}
SQL_Query(db_handle);
/* Read the ResultSet - On existence, expecting 1 TField as result, type SQL_C_LONG */
if ((db_handle->resultset->rowCnt <= 0) || (db_handle->resultset->colCnt <= 0)) {
lcmaps_log(LOG_ERR, "%s: No results from the query to select the unix_gid_voms_fqan_id from unix_gid_voms_fqans.\n", __func__);
goto fail_jobrep;
} else if ((db_handle->resultset->rowCnt > 1) || (db_handle->resultset->colCnt > 1)) {
lcmaps_log(LOG_ERR, "%s: Too many results returned. Either the query got executed wrongly or the database integrity is compromised. Check if the certificates tables has the proper UNIQUE() index statements set.\n", __func__);
goto fail_jobrep;
}
/* One result please, only one */
if (db_handle->resultset->data[0][0].type != SQL_C_LONG) {
lcmaps_log(LOG_ERR, "%s: result for the \"unix_gid_voms_fqan_id\" provided in the wrong datatype. Expected SQL_C_LONG (and equivalent)\n",
__func__);
goto fail_jobrep;
}
/* Store the cert_id */
unix_gid_voms_fqan_id = db_handle->resultset->data[0][0].v.v_long;
/* Clean up */
SQL_QueryCloseAndClean(db_handle);
if (reg_datetime) free(reg_datetime);
return unix_gid_voms_fqan_id;
fail_jobrep:
if (reg_datetime) free(reg_datetime);
return -1;
}
long
jobrep_create_effective_credentials_main(struct jr_db_handle_s *db_handle) {
char *reg_datetime = NULL;
long eff_cred_id = -1;
/*** Insert the effective_credentials ***/
if (SQL_Prepare(db_handle,
(unsigned char *)"insert into effective_credentials (registration_datetime) values (?)") < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to prepare a query to insert a new effective_credentials record into \"effective_credentials\"\n", __func__);
goto fail_jobrep;
}
/* Bind data to Query */
reg_datetime = jobrep_time_to_string(time(NULL));
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_CHAR, SQL_VARCHAR, reg_datetime) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Registration DateTime value to the query\n", __func__);
goto fail_jobrep;
}
/* Fail on existance */
if (SQL_Exec(db_handle) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to insert a effective_credentials record. This record is crucial.\n", __func__);
goto fail_jobrep;
}
/*** Select last inserted auto-incremented ID ***/
/* WARNING! MySQL-only */
if (SQL_Prepare(db_handle,
(unsigned char *)"select last_insert_id() as eff_cred_id") < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to prepare a query for the last inserted auto_incremente ID for the \"effective_credentials\"\n", __func__);
goto fail_jobrep;
}
/* The UNIQUE statement in the DB will purposely cast an error. This query is very unlikely to fail */
SQL_Query(db_handle);
/* Read the ResultSet - On existence, expecting 1 TField as result, type SQL_C_LONG */
if ((db_handle->resultset->rowCnt <= 0) || (db_handle->resultset->colCnt <= 0)) {
lcmaps_log(LOG_ERR, "%s: No results from the query to select the eff_cred_id from \"effective_credentials\"\n", __func__);
goto fail_jobrep;
} else if ((db_handle->resultset->rowCnt > 1) || (db_handle->resultset->colCnt > 1)) {
lcmaps_log(LOG_ERR, "%s: Too many results returned. The last_insert_id() is only expected to return 1 column and 1 row.\n", __func__);
goto fail_jobrep;
}
/* One result please, only one */
if (db_handle->resultset->data[0][0].type != SQL_C_LONG) {
lcmaps_log(LOG_ERR, "%s: result for the \"eff_cred_id\" provided in the wrong datatype. Expected SQL_C_LONG (and equivalent)\n",
__func__);
goto fail_jobrep;
}
/* Store the cert_id */
eff_cred_id = db_handle->resultset->data[0][0].v.v_long;
fail_jobrep:
/* Clean up */
SQL_QueryCloseAndClean(db_handle);
return eff_cred_id;
}
int
jobrep_push_compute_job_info(struct jr_db_handle_s *db_handle, long eff_cred_id, char *gatekeeper_jm_id) {
if (db_handle == NULL || eff_cred_id == -1 || gatekeeper_jm_id == NULL) {
return -1;
}
/*** Insert the effective_credentials ***/
if (SQL_Prepare(db_handle,
(unsigned char *)"insert into compute_jobs (eff_cred_id, gatekeeper_jm_id) values (?, ?)") < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to prepare a query to insert a compute_jobs record into \"compute_jobs\"\n", __func__);
goto fail_jobrep;
}
/* Bind data to Query */
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_LONG, SQL_INTEGER, &eff_cred_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the \"eff_cred_id\" value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_CHAR, SQL_VARCHAR, gatekeeper_jm_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the \"GATEKEEPER_JM_ID\" value to the query\n", __func__);
goto fail_jobrep;
}
/* Fail on existance */
SQL_Exec(db_handle);
/* Clean up */
SQL_QueryCloseAndClean(db_handle);
return 0;
fail_jobrep:
return -1;
}
int
jobrep_push_voms_fqans(struct jr_db_handle_s *db_handle, long eff_cred_id) {
int i = 0;
lcmaps_vo_mapping_t *vo_mapping = NULL;
int cnt_vo_mapping = 0;
long voms_fqan_id = -1;
long unix_gid_id = -1;
int is_primary = 0;
long unix_gid_voms_fqan_id = -1;
if (db_handle == NULL) {
return -1;
}
/* VO information */
vo_mapping = getCredentialData(LCMAPS_VO_CRED_MAPPING, &cnt_vo_mapping);
for (i = 0; i < cnt_vo_mapping; i++) {
/* Select existing record of the FQAN */
/* lcmaps_log_debug (4, "FQAN[%d/%d]: %s, %d(%s)\n", */
/* i + 1, cnt_vo_mapping, vo_mapping[i].vostring, vo_mapping[i].gid, vo_mapping[i].groupname); */
if (SQL_Prepare(db_handle, (unsigned char *)"insert into voms_fqans (fqan) values (?)") < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to Prepare the query to insert into the voms_fqans\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_CHAR, SQL_VARCHAR, vo_mapping[i].vostring) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Subject DN value to the query\n", __func__);
goto fail_jobrep;
}
/* The UNIQUE statement in the DB will purposely cast an error. This query is very unlikely to fail */
SQL_IgnoreErrors_Set(db_handle);
SQL_Exec(db_handle);
/* Fetch the voms_fqan_id */
voms_fqan_id = jobrep_get_voms_fqan_id_from_fqan(db_handle, vo_mapping[i].vostring);
if (voms_fqan_id < 0) {
lcmaps_log(LOG_ERR,
"%s: Database integrity error. Failed to find the VOMS FQAN \"%s\" in the database for further processing.\n",
__func__, vo_mapping[i].vostring);
goto fail_jobrep;
}
/* Fetch unix_gid_id */
unix_gid_id = jobrep_get_unix_gid_id_from_gid(db_handle, vo_mapping[i].gid, vo_mapping[i].groupname);
if (unix_gid_id < 0) {
lcmaps_log(LOG_ERR,
"%s: Database integrity error. Failed to find the Unix GID \"%d(%s)\" in the database for further processing.\n",
__func__, vo_mapping[i].gid, vo_mapping[i].groupname);
goto fail_jobrep;
}
/* Insert the VOMS FQAN to Unix GID coupling */
(i == 0) ? (is_primary = 1) : (is_primary = 0);
unix_gid_voms_fqan_id = jobrep_insert_unix_gid_voms_fqans(db_handle, voms_fqan_id, unix_gid_id, is_primary);
if (unix_gid_voms_fqan_id < 0) {
goto fail_jobrep;
}
/*** Insert the effective_credentials_voms ***/
if (SQL_Prepare(db_handle,
(unsigned char *)"insert into effective_credentials_unix_gid_voms "\
" (eff_cred_id, unix_gid_voms_fqan_id)" \
" values (?, ?)") < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to prepare a query to insert eff_cred_id and unix_gid_voms_fqan_id into \"effective_credentials_voms\"\n", __func__);
goto fail_jobrep;
}
/* Bind data to Query */
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_LONG, SQL_INTEGER, &eff_cred_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the \"eff_cred_id\" value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_LONG, SQL_INTEGER, &unix_gid_voms_fqan_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the \"unix_gid_voms_fqan_id\" value to the query\n", __func__);
goto fail_jobrep;
}
/* Fail on existance */
SQL_Exec(db_handle);
/* Clean up */
SQL_QueryCloseAndClean(db_handle);
}
return 0;
fail_jobrep:
return -1;
}
int
jobrep_push_effective_credential_user(struct jr_db_handle_s *db_handle, long user_id, long eff_cred_id) {
if ((db_handle == NULL) || (user_id < 0) || (eff_cred_id < 0)) {
return -1;
}
/*** Insert the effective_credentials_users ***/
if (SQL_Prepare(db_handle,
(unsigned char *)"insert into effective_credential_users "\
" (eff_cred_id, user_id)" \
" values (?, ?)") < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to prepare a query to insert eff_cred_id and user_id into \"effective_credential_users\"\n", __func__);
goto fail_jobrep;
}
/* Bind data to Query */
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_LONG, SQL_INTEGER, &eff_cred_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the \"eff_cred_id\" value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_LONG, SQL_INTEGER, &user_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the \"user_id\" value to the query\n", __func__);
goto fail_jobrep;
}
/* Fail on existance */
SQL_Exec(db_handle);
/* Clean up */
SQL_QueryCloseAndClean(db_handle);
return 0;
fail_jobrep:
return -1;
}
int
jobrep_push_effective_credential_unix_uid(struct jr_db_handle_s *db_handle, long unix_uid_id, long eff_cred_id) {
int i = 0;
lcmaps_vo_mapping_t *vo_mapping = NULL;
int cnt_vo_mapping = 0;
long voms_fqan_id = -1;
/* int unix_uid_id = -1; */
long unix_uid_voms_fqan_id = -1;
if ((db_handle == NULL) || (unix_uid_id < 0) || (eff_cred_id < 0)) {
return -1;
}
/* VO information */
vo_mapping = getCredentialData(LCMAPS_VO_CRED_MAPPING, &cnt_vo_mapping);
if (cnt_vo_mapping > 0) {
/* Fetch the voms_fqan_id */
voms_fqan_id = jobrep_get_voms_fqan_id_from_fqan(db_handle, vo_mapping[0].vostring);
if (voms_fqan_id < 0) {
lcmaps_log(LOG_ERR,
"%s: Database integrity error. Failed to find the VOMS FQAN \"%s\" in the database for further processing.\n",
__func__, vo_mapping[i].vostring);
goto fail_jobrep;
}
/* unix_uid_voms_fqans */
unix_uid_voms_fqan_id = jobrep_insert_unix_uid_voms_fqans(db_handle, voms_fqan_id, unix_uid_id);
/*** Insert the effective_credentials_voms ***/
if (SQL_Prepare(db_handle,
(unsigned char *)"insert into effective_credentials_unix_uid_voms "\
" (eff_cred_id, unix_uid_voms_fqan_id)" \
" values (?, ?)") < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to prepare a query to insert eff_cred_id and unix_uid_voms_fqan_id into \"effective_credentials_voms\"\n", __func__);
goto fail_jobrep;
}
/* Bind data to Query */
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_LONG, SQL_INTEGER, &eff_cred_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the \"eff_cred_id\" value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_LONG, SQL_INTEGER, &unix_uid_voms_fqan_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the \"unix_uid_voms_fqan_id\" value to the query\n", __func__);
goto fail_jobrep;
}
/* Fail on existance */
SQL_Exec(db_handle);
/* Clean up */
SQL_QueryCloseAndClean(db_handle);
}
/*** Insert the effective_credentials_users ***/
if (SQL_Prepare(db_handle,
(unsigned char *)"insert into effective_credential_unix_uids "\
" (eff_cred_id, unix_uid_id)" \
" values (?, ?)") < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to prepare a query to insert eff_cred_id and unix_uid_id into \"effective_credential_unix_uids\"\n", __func__);
goto fail_jobrep;
}
/* Bind data to Query */
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_LONG, SQL_INTEGER, &eff_cred_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the \"eff_cred_id\" value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_LONG, SQL_INTEGER, &unix_uid_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the \"unix_uid_id\" value to the query\n", __func__);
goto fail_jobrep;
}
/* Fail on existance */
SQL_Exec(db_handle);
/* Clean up */
SQL_QueryCloseAndClean(db_handle);
return 0;
fail_jobrep:
return -1;
}
int
jobrep_push_effective_credential_unix_gid(struct jr_db_handle_s *db_handle, long unix_gid_id, long eff_cred_id, int is_primary) {
if ((db_handle == NULL) || (unix_gid_id < 0) || (eff_cred_id < 0)) {
return -1;
}
/*** Insert the effective_credentials_users ***/
if (SQL_Prepare(db_handle,
(unsigned char *)"insert into effective_credential_unix_gids "\
" (eff_cred_id, unix_gid_id, is_primary)" \
" values (?, ?, ?)") < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to prepare a query to insert eff_cred_id, unix_gid_id and is_primary into \"effective_credential_unix_gids\"\n", __func__);
goto fail_jobrep;
}
/* Bind data to Query */
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_LONG, SQL_INTEGER, &eff_cred_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the \"eff_cred_id\" value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_LONG, SQL_INTEGER, &unix_gid_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the \"unix_gid_id\" value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)3, SQL_C_LONG, SQL_INTEGER, &is_primary) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the \"is_primary\" value to the query\n", __func__);
goto fail_jobrep;
}
/* Fail on existance */
SQL_Exec(db_handle);
/* Clean up */
SQL_QueryCloseAndClean(db_handle);
return 0;
fail_jobrep:
return -1;
}
int
jobrep_push_effective_credential_unix_gids(struct jr_db_handle_s *db_handle, long eff_cred_id) {
int i = 0;
gid_t *priGid = NULL;
int cntPriGid = 0;
gid_t *secGid = NULL;
int cntSecGid = 0;
struct group *group_info = NULL;
long unix_gid_id = -1;
if ((db_handle == NULL) || (eff_cred_id < 0)) {
return -1;
}
/* Add the Primary GroupID info */
priGid = getCredentialData(PRI_GID, &cntPriGid);
if (cntPriGid > 0) {
group_info = getgrgid(priGid[0]);
unix_gid_id = jobrep_get_unix_gid_id_from_gid(db_handle, priGid[0], (group_info) ? group_info->gr_name : NULL);
if (unix_gid_id < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to insert an effective_credential_unix_gids record based on the primary GID %d(%s).\n",
__func__,
priGid[0],
(group_info) ? group_info->gr_name : "n/a");
goto fail_jobrep;
}
if (jobrep_push_effective_credential_unix_gid(db_handle, unix_gid_id, eff_cred_id, 1) < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to push the effective_credential_unix_gid record based on the unix_gid_id %ld and eff_cred_id %ld\n",
__func__,
(long)unix_gid_id,
(long)eff_cred_id);
goto fail_jobrep;
}
}
/* Add the Secondary GroupID info */
secGid = getCredentialData(SEC_GID, &cntSecGid);
for (i = 0; i < cntSecGid; i++) {
group_info = getgrgid(secGid[i]);
unix_gid_id = jobrep_get_unix_gid_id_from_gid(db_handle, secGid[i], (group_info) ? group_info->gr_name : NULL);
if (unix_gid_id < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to insert an effective_credential_unix_gids record based on the secondary GID %d(%s).\n",
__func__,
secGid[i],
(group_info) ? group_info->gr_name : "n/a");
goto fail_jobrep;
}
if (jobrep_push_effective_credential_unix_gid(db_handle, unix_gid_id, eff_cred_id, 0) < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to push the effective_credential_unix_gid record based on the unix_gid_id %ld and eff_cred_id %ld\n",
__func__,
(long)unix_gid_id,
(long)eff_cred_id);
goto fail_jobrep;
}
}
return 0;
fail_jobrep:
return -1;
}
long
jobrep_push_unix_cred(struct jr_db_handle_s *db_handle) {
int i = 0;
long unix_uid_id_and_res = -1;
uid_t *uid = NULL;
int cntUid = 0;
gid_t *priGid = NULL;
int cntPriGid = 0;
gid_t *secGid = NULL;
int cntSecGid = 0;
struct passwd *user_info = NULL;
struct group *group_info = NULL;
char emptyname[5];
strncpy(emptyname,"NULL",5);
if (db_handle == NULL) {
lcmaps_log(LOG_ERR, "%s called with an empty Database handle\n", __func__);
return -1;
}
/* Add the UserID info */
uid = getCredentialData(UID, &cntUid);
if (cntUid > 0) {
SQL_Prepare(db_handle, (unsigned char *)"insert into unix_uids (uid, uid_name) values(?, ?)");
/* Bind data to Query */
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_LONG, SQL_INTEGER, &(uid[0])) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the UID value to the query\n", __func__);
goto fail_jobrep;
}
user_info = getpwuid(uid[0]);
if (user_info) {
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_CHAR, SQL_VARCHAR, user_info->pw_name) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Username value to the query\n", __func__);
goto fail_jobrep;
}
} else {
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_CHAR, SQL_VARCHAR, emptyname) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Username value to the query\n", __func__);
goto fail_jobrep;
}
}
/* Insert the User account */
SQL_IgnoreErrors_Set(db_handle);
SQL_Exec(db_handle);
/* Clean up */
SQL_QueryCloseAndClean(db_handle);
/** Select the unix_uid_id from the uid and uid_name **/
SQL_Prepare(db_handle,
(unsigned char *)"select unix_uid_id from unix_uids where uid = ? and uid_name = ?");
/* Bind data to Query */
if (SQL_BindParam(db_handle,(SQLUSMALLINT) 1, SQL_C_LONG, SQL_INTEGER, &(uid[0])) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the UID value to the query\n", __func__);
goto fail_jobrep;
}
/* user_info = getpwuid(uid[0]); - already got this */
if (user_info) {
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_CHAR, SQL_VARCHAR, user_info->pw_name) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Username value to the query\n", __func__);
goto fail_jobrep;
}
} else {
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_CHAR, SQL_VARCHAR, emptyname) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Username value to the query\n", __func__);
goto fail_jobrep;
}
}
SQL_Query(db_handle);
/* Read the ResultSet - On existence, expecting 1 TField as result, type SQL_C_LONG */
if ((db_handle->resultset->rowCnt <= 0) || (db_handle->resultset->colCnt <= 0)) {
lcmaps_log(LOG_ERR, "%s: No results from the query to select the unix_uid_id from \"unix_uids\"\n", __func__);
goto fail_jobrep;
} else if ((db_handle->resultset->rowCnt > 1) || (db_handle->resultset->colCnt > 1)) {
lcmaps_log(LOG_ERR, "%s: Too many results returned. The query is only expected to return 1 column and 1 row.\n", __func__);
goto fail_jobrep;
}
/* One result please, only one */
if (db_handle->resultset->data[0][0].type != SQL_C_LONG) {
lcmaps_log(LOG_ERR,
"%s: result for the \"unix_uids\" provided in the wrong datatype. " \
"Expected SQL_C_LONG (and equivalent)\n",
__func__);
goto fail_jobrep;
}
/* Store the cert_id */
unix_uid_id_and_res = db_handle->resultset->data[0][0].v.v_long;
} else {
/* Non-result */
unix_uid_id_and_res = 0;
}
/* Add the Primary GroupID info */
priGid = getCredentialData(PRI_GID, &cntPriGid);
if (cntPriGid > 0) {
SQL_Prepare(db_handle, (unsigned char *)"insert into unix_gids (gid, gid_name) values(?, ?)");
/* Bind data to Query */
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_LONG, SQL_INTEGER, &(priGid[0])) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the PriGID value to the query\n", __func__);
goto fail_jobrep;
}
group_info = getgrgid(priGid[0]);
if (group_info) {
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_CHAR, SQL_VARCHAR, group_info->gr_name) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the primary groupname value to the query\n", __func__);
goto fail_jobrep;
}
} else {
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_CHAR, SQL_VARCHAR, emptyname) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the primary groupname value to the query\n", __func__);
goto fail_jobrep;
}
}
/* Insert the User account */
SQL_IgnoreErrors_Set(db_handle);
SQL_Exec(db_handle);
}
/* Add the Secondary GroupID info */
secGid = getCredentialData(SEC_GID, &cntSecGid);
for (i = 0; i < cntSecGid; i++) {
SQL_Prepare(db_handle, (unsigned char *)"insert into unix_gids (gid, gid_name) values(?, ?)");
/* Bind data to Query */
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_LONG, SQL_INTEGER, &(secGid[i])) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the PriGID value to the query\n", __func__);
goto fail_jobrep;
}
group_info = getgrgid(secGid[i]);
if (group_info) {
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_CHAR, SQL_VARCHAR, group_info->gr_name) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the primary groupname value to the query\n", __func__);
goto fail_jobrep;
}
} else {
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_CHAR, SQL_VARCHAR, emptyname) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the primary groupname value to the query\n", __func__);
goto fail_jobrep;
}
}
/* Insert the User account */
SQL_IgnoreErrors_Set(db_handle);
SQL_Exec(db_handle);
}
return unix_uid_id_and_res;
fail_jobrep:
return -1;
}
int
jobrep_push_certificates(struct jr_db_handle_s *db_handle, STACK_OF(X509) *px509_chain) {
int i = 0;
int depth = 0, purpose = 0;
char *subject_DN = NULL, *issuer_DN = NULL, *not_before_str = NULL, *not_after_str = NULL;
time_t not_before = 0, not_after = 0;
X509 *cert = NULL;
char *serialnr = NULL;
if ((db_handle == NULL) || (px509_chain == NULL)) {
return -1;
}
depth = sk_X509_num(px509_chain);
for (i = 0; i < depth; i++) {
if ((cert = sk_X509_value(px509_chain, i))) {
subject_DN = X509_NAME_oneline(X509_get_subject_name(cert),NULL,0);
if (subject_DN == NULL) {
lcmaps_log(LOG_INFO, "%s: No Subject DN found in the certificate.\n", __func__);
goto fail_jobrep;
}
issuer_DN = X509_NAME_oneline(X509_get_issuer_name(cert),NULL,0);
if (issuer_DN == NULL) {
lcmaps_log(LOG_INFO, "%s: No Issuer DN found in the certificate.\n", __func__);
goto fail_jobrep;
}
serialnr = jobrep_get_serialnumber_as_string(cert);
if (serialnr == NULL) {
lcmaps_log(LOG_INFO, "%s: No serial number found in the certificate\n", __func__);
goto fail_jobrep;
}
/* Gain the purpose, CA or not */
purpose = jobrep_grid_x509IsCA(cert);
not_before = jobrep_asn1TimeToTimeT(ASN1_STRING_data(X509_get_notBefore(cert)),(size_t)0);
not_before_str = jobrep_time_to_string(not_before);
if (not_before_str == NULL) {
lcmaps_log(LOG_INFO, "%s: Conversion from a ASN1_TIME to a string failed for the Not Before time\n",
__func__);
goto fail_jobrep;
}
not_after = jobrep_asn1TimeToTimeT(ASN1_STRING_data(X509_get_notAfter(cert)),(size_t)0);
not_after_str = jobrep_time_to_string(not_after);
if (not_after_str == NULL) {
lcmaps_log(LOG_INFO, "%s: Conversion from a ASN1_TIME to a string failed for the Not After time\n",
__func__);
goto fail_jobrep;
}
SQL_Prepare(db_handle,
(unsigned char *)"insert into " \
"certificates (subject, issuer, purpose, serialnr, valid_from, valid_until) " \
" values (?, ?, ?, ?, ?, ?)");
if (SQL_BindParam(db_handle, (SQLUSMALLINT)1, SQL_C_CHAR, SQL_VARCHAR, subject_DN) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Subject DN value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)2, SQL_C_CHAR, SQL_VARCHAR, issuer_DN) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Issuer DN value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)3, SQL_C_LONG, SQL_INTEGER, &purpose) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Purpose value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)4, SQL_C_CHAR, SQL_VARCHAR, serialnr) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Serial Nr value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)5, SQL_C_CHAR, SQL_VARCHAR, not_before_str) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Valid From value to the query\n", __func__);
goto fail_jobrep;
}
if (SQL_BindParam(db_handle, (SQLUSMALLINT)6, SQL_C_CHAR, SQL_VARCHAR, not_after_str) < 0) {
lcmaps_log(LOG_ERR, "%s: Unable to bind the Valid Until value to the query\n", __func__);
goto fail_jobrep;
}
/* The UNIQUE statement in the DB will purposely cast an error. This query is very unlikely to fail */
SQL_IgnoreErrors_Set(db_handle);
SQL_Exec(db_handle);
free(not_before_str);
free(not_after_str);
free(serialnr);
free(subject_DN);
free(issuer_DN);
}
}
return 0;
fail_jobrep:
if (not_before_str) free(not_before_str);
if (not_after_str) free(not_after_str);
if (serialnr) free(serialnr);
if (subject_DN) free(subject_DN);
if (issuer_DN) free(issuer_DN);
return -1;
}
char *
jobrep_get_serialnumber_as_string(X509 *cert) {
ASN1_INTEGER *serial = NULL;
char *subject_DN = NULL;
BIGNUM *bn_serial;
char *serialStr = NULL;
if (cert == NULL)
return NULL;
if ( (serial = X509_get_serialNumber(cert)) == NULL) {
/* For debugging purposes extract the Subject DN */
subject_DN = X509_NAME_oneline(X509_get_subject_name(cert),NULL,0);
if (subject_DN) {
lcmaps_log(LOG_WARNING, "%s: certificate passed with subject DN \"%s\" didn't contain a serial number.\n",
__func__, subject_DN);
free(subject_DN);
} else {
lcmaps_log(LOG_WARNING, "%s: certificate passed doesn't have a serialnumber and also lacks a subject DN. " \
"This is completely weird and doesn't even look like a certificate. " \
"Are you a waiter because you seem to be feeding me soup?\n",
__func__);
}
return NULL;
}
if ( (bn_serial = ASN1_INTEGER_to_BN(serial, NULL)) == NULL ||
(serialStr = BN_bn2hex(bn_serial)) == NULL )
{
lcmaps_log(LOG_WARNING, "%s: Cannot convert ASN1_INTEGER serial to char *", __func__);
return NULL;
}
BN_clear_free(bn_serial);
return serialStr;
}
char *
jobrep_time_to_string(time_t some_time) {
struct tm *tmpTime = NULL;
char *datetime = NULL;
tmpTime = malloc(sizeof(struct tm));
if (tmpTime == NULL)
goto cleanup;
gmtime_r(&some_time, tmpTime);
datetime = malloc(sizeof(char) * 20);
if (datetime == NULL)
goto cleanup;
snprintf(datetime, (size_t)20, "%04d-%02d-%02d %02d:%02d:%02d",
tmpTime->tm_year + 1900, tmpTime->tm_mon + 1, tmpTime->tm_mday,
tmpTime->tm_hour, tmpTime->tm_min, tmpTime->tm_sec);
/* Done */
free(tmpTime);
return datetime;
/* Failed */
cleanup:
free(tmpTime);
free(datetime);
return NULL;
}
static time_t
jobrep_my_timegm(struct tm *tm) {
time_t ret;
char *tz;
tz = getenv("TZ");
setenv("TZ", "", 1);
tzset();
ret = mktime(tm);
if (tz)
setenv("TZ", tz, 1);
else
unsetenv("TZ");
tzset();
return ret;
}
/* ASN1 time string (in a char *) to time_t */
/**
* (Use ASN1_STRING_data() to convert ASN1_GENERALIZEDTIME to char * if
* necessary)
*/
time_t
jobrep_asn1TimeToTimeT(unsigned char *asn1time, size_t len) {
char zone;
struct tm time_tm;
memset(&time_tm,0,sizeof(struct tm));
if (len == 0) len = strlen((char *)asn1time);
if ((len != 13) && (len != 15)) return 0; /* dont understand */
if ((len == 13) &&
((sscanf((char *) asn1time, "%02d%02d%02d%02d%02d%02d%c",
&(time_tm.tm_year),
&(time_tm.tm_mon),
&(time_tm.tm_mday),
&(time_tm.tm_hour),
&(time_tm.tm_min),
&(time_tm.tm_sec),
&zone) != 7) || (zone != 'Z'))) return 0; /* dont understand */
if ((len == 15) &&
((sscanf((char *) asn1time, "20%02d%02d%02d%02d%02d%02d%c",
&(time_tm.tm_year),
&(time_tm.tm_mon),
&(time_tm.tm_mday),
&(time_tm.tm_hour),
&(time_tm.tm_min),
&(time_tm.tm_sec),
&zone) != 7) || (zone != 'Z'))) return 0; /* dont understand */
/* time format fixups */
if (time_tm.tm_year < 90) time_tm.tm_year += 100;
--(time_tm.tm_mon);
return jobrep_my_timegm(&time_tm);
}
lcmaps-plugins-jobrep-1.5.7/src/jobrep/lcmaps_plugin_prototypes.h 0000644 0001750 0000144 00000004562 14574533163 022266 0000000 0000000 /**
* Copyright (c) Members of the EGEE Collaboration. 2004-2010.
* See http://www.eu-egee.org/partners/ for details on the copyright
* holders.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*
* Authors:
* 2009-
* Oscar Koeroo
* Mischa Sall\'e
* David Groep
* NIKHEF Amsterdam, the Netherlands
*
*
* 2007-2009
* Oscar Koeroo
* David Groep
* NIKHEF Amsterdam, the Netherlands
*
*
* 2003-2007
* Martijn Steenbakkers
* Gerben Venekamp
* Oscar Koeroo
* David Groep
* NIKHEF Amsterdam, the Netherlands
*
*/
/*!
\file lcmaps_plugin_prototypes.h
\brief plugin function prototypes
*/
#ifndef LCMAPS_PLUGIN_PROTOTYPES_H
#define LCMAPS_PLUGIN_PROTOTYPES_H
int plugin_initialize (int, char **);
int plugin_introspect(int *, lcmaps_argument_t **);
int plugin_run(int, lcmaps_argument_t *);
int plugin_verify(int, lcmaps_argument_t *);
int plugin_terminate(void);
#endif /* LCMAPS_PLUGIN_PROTOTYPES_H */
lcmaps-plugins-jobrep-1.5.7/src/jobrep/Makefile.am 0000644 0001750 0000144 00000002550 14574533163 016777 0000000 0000000 # Copyright (c) Members of the IGE Project 2012.
# See http://ige-project.eu for details on the copyright holders.
# For license conditions see the license file or
#
# Authors: Oscar Koeroo
#EXTRACOMPILEFLAGS = \
# -g -Wall -Wextra -Wconversion \
# -O -Wuninitialized \
# -Wbad-function-cast -Wcast-align \
# -Wcast-qual -Wchar-subscripts -Winline \
# -Wmissing-prototypes -Wnested-externs -Wpointer-arith \
# -Wredundant-decls -Wshadow -Wstrict-prototypes \
# -Wpointer-arith -Wno-long-long
# -pedantic
# -Wredundant-decls -Wshadow -Wstrict-prototypes
AM_CPPFLAGS = \
$(LCMAPS_CFLAGS) \
-I$(top_srcdir)/src/api \
$(UNIXODBC_CFLAGS)
liblcmaps_jobrep_la_CFLAGS = ${EXTRACOMPILEFLAGS}
liblcmaps_jobrep_la_LDFLAGS = -avoid-version
#liblcmaps_jobrep_la_LIBADD = \
# $(JOBREP_API_LIBS)
liblcmaps_jobrep_la_SOURCES = \
../api/jobrep_odbc_api.h \
../api/jobrep_odbc_api.c \
jobrep_data_handling.h \
jobrep_data_handling.c \
lcmaps_plugin_prototypes.h \
lcmaps_jobrep.c
plugindir = $(MODULEDIR)
plugin_LTLIBRARIES = \
liblcmaps_jobrep.la
install-data-hook:
( \
cd $(DESTDIR)$(plugindir); \
for mod in jobrep ; do \
rm -f lcmaps_$$mod.mod; \
ln -s liblcmaps_$$mod@SHREXT@ lcmaps_$$mod.mod; \
done \
)
EXTRA_DIST = jobrep_test.c jobrep_test.h
lcmaps-plugins-jobrep-1.5.7/src/jobrep/Makefile.in 0000644 0001750 0000144 00000066523 14574774131 017024 0000000 0000000 # Makefile.in generated by automake 1.16.5 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2021 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# Copyright (c) Members of the IGE Project 2012.
# See http://ige-project.eu for details on the copyright holders.
# For license conditions see the license file or
#
# Authors: Oscar Koeroo
#EXTRACOMPILEFLAGS = \
# -g -Wall -Wextra -Wconversion \
# -O -Wuninitialized \
# -Wbad-function-cast -Wcast-align \
# -Wcast-qual -Wchar-subscripts -Winline \
# -Wmissing-prototypes -Wnested-externs -Wpointer-arith \
# -Wredundant-decls -Wshadow -Wstrict-prototypes \
# -Wpointer-arith -Wno-long-long
# -pedantic
# -Wredundant-decls -Wshadow -Wstrict-prototypes
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = src/jobrep
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/project/lcmaps.m4 \
$(top_srcdir)/project/libtool.m4 \
$(top_srcdir)/project/ltoptions.m4 \
$(top_srcdir)/project/ltsugar.m4 \
$(top_srcdir)/project/ltversion.m4 \
$(top_srcdir)/project/lt~obsolete.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/src/lcmaps_jobrep_config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
am__installdirs = "$(DESTDIR)$(plugindir)"
LTLIBRARIES = $(plugin_LTLIBRARIES)
liblcmaps_jobrep_la_LIBADD =
am__dirstamp = $(am__leading_dot)dirstamp
am_liblcmaps_jobrep_la_OBJECTS = \
../api/liblcmaps_jobrep_la-jobrep_odbc_api.lo \
liblcmaps_jobrep_la-jobrep_data_handling.lo \
liblcmaps_jobrep_la-lcmaps_jobrep.lo
liblcmaps_jobrep_la_OBJECTS = $(am_liblcmaps_jobrep_la_OBJECTS)
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 =
liblcmaps_jobrep_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
$(liblcmaps_jobrep_la_CFLAGS) $(CFLAGS) \
$(liblcmaps_jobrep_la_LDFLAGS) $(LDFLAGS) -o $@
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__maybe_remake_depfiles = depfiles
am__depfiles_remade = \
../api/$(DEPDIR)/liblcmaps_jobrep_la-jobrep_odbc_api.Plo \
./$(DEPDIR)/liblcmaps_jobrep_la-jobrep_data_handling.Plo \
./$(DEPDIR)/liblcmaps_jobrep_la-lcmaps_jobrep.Plo
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo " CC " $@;
am__v_CC_1 =
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo " CCLD " $@;
am__v_CCLD_1 =
SOURCES = $(liblcmaps_jobrep_la_SOURCES)
DIST_SOURCES = $(liblcmaps_jobrep_la_SOURCES)
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DISTBIN = @DISTBIN@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FILECMD = @FILECMD@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LCMAPS_BASIC_INTERFACE_CFLAGS = @LCMAPS_BASIC_INTERFACE_CFLAGS@
LCMAPS_BASIC_INTERFACE_LIBS = @LCMAPS_BASIC_INTERFACE_LIBS@
LCMAPS_CFLAGS = @LCMAPS_CFLAGS@
LCMAPS_INTERFACE_CFLAGS = @LCMAPS_INTERFACE_CFLAGS@
LCMAPS_INTERFACE_LIBS = @LCMAPS_INTERFACE_LIBS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MODULEDIR = @MODULEDIR@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SHREXT = @SHREXT@
STRIP = @STRIP@
UNIXODBC_CFLAGS = @UNIXODBC_CFLAGS@
UNIXODBC_LIBS = @UNIXODBC_LIBS@
VERSION = @VERSION@
WORKDIR = @WORKDIR@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AM_CPPFLAGS = \
$(LCMAPS_CFLAGS) \
-I$(top_srcdir)/src/api \
$(UNIXODBC_CFLAGS)
liblcmaps_jobrep_la_CFLAGS = ${EXTRACOMPILEFLAGS}
liblcmaps_jobrep_la_LDFLAGS = -avoid-version
#liblcmaps_jobrep_la_LIBADD = \
# $(JOBREP_API_LIBS)
liblcmaps_jobrep_la_SOURCES = \
../api/jobrep_odbc_api.h \
../api/jobrep_odbc_api.c \
jobrep_data_handling.h \
jobrep_data_handling.c \
lcmaps_plugin_prototypes.h \
lcmaps_jobrep.c
plugindir = $(MODULEDIR)
plugin_LTLIBRARIES = \
liblcmaps_jobrep.la
EXTRA_DIST = jobrep_test.c jobrep_test.h
all: all-am
.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/jobrep/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign src/jobrep/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-pluginLTLIBRARIES: $(plugin_LTLIBRARIES)
@$(NORMAL_INSTALL)
@list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
list2="$$list2 $$p"; \
else :; fi; \
done; \
test -z "$$list2" || { \
echo " $(MKDIR_P) '$(DESTDIR)$(plugindir)'"; \
$(MKDIR_P) "$(DESTDIR)$(plugindir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(plugindir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(plugindir)"; \
}
uninstall-pluginLTLIBRARIES:
@$(NORMAL_UNINSTALL)
@list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(plugindir)/$$f'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(plugindir)/$$f"; \
done
clean-pluginLTLIBRARIES:
-test -z "$(plugin_LTLIBRARIES)" || rm -f $(plugin_LTLIBRARIES)
@list='$(plugin_LTLIBRARIES)'; \
locs=`for p in $$list; do echo $$p; done | \
sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
sort -u`; \
test -z "$$locs" || { \
echo rm -f $${locs}; \
rm -f $${locs}; \
}
../api/$(am__dirstamp):
@$(MKDIR_P) ../api
@: > ../api/$(am__dirstamp)
../api/$(DEPDIR)/$(am__dirstamp):
@$(MKDIR_P) ../api/$(DEPDIR)
@: > ../api/$(DEPDIR)/$(am__dirstamp)
../api/liblcmaps_jobrep_la-jobrep_odbc_api.lo: ../api/$(am__dirstamp) \
../api/$(DEPDIR)/$(am__dirstamp)
liblcmaps_jobrep.la: $(liblcmaps_jobrep_la_OBJECTS) $(liblcmaps_jobrep_la_DEPENDENCIES) $(EXTRA_liblcmaps_jobrep_la_DEPENDENCIES)
$(AM_V_CCLD)$(liblcmaps_jobrep_la_LINK) -rpath $(plugindir) $(liblcmaps_jobrep_la_OBJECTS) $(liblcmaps_jobrep_la_LIBADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
-rm -f ../api/*.$(OBJEXT)
-rm -f ../api/*.lo
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@../api/$(DEPDIR)/liblcmaps_jobrep_la-jobrep_odbc_api.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblcmaps_jobrep_la-jobrep_data_handling.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblcmaps_jobrep_la-lcmaps_jobrep.Plo@am__quote@ # am--include-marker
$(am__depfiles_remade):
@$(MKDIR_P) $(@D)
@echo '# dummy' >$@-t && $(am__mv) $@-t $@
am--depfiles: $(am__depfiles_remade)
.c.o:
@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
.c.obj:
@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.c.lo:
@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
../api/liblcmaps_jobrep_la-jobrep_odbc_api.lo: ../api/jobrep_odbc_api.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liblcmaps_jobrep_la_CFLAGS) $(CFLAGS) -MT ../api/liblcmaps_jobrep_la-jobrep_odbc_api.lo -MD -MP -MF ../api/$(DEPDIR)/liblcmaps_jobrep_la-jobrep_odbc_api.Tpo -c -o ../api/liblcmaps_jobrep_la-jobrep_odbc_api.lo `test -f '../api/jobrep_odbc_api.c' || echo '$(srcdir)/'`../api/jobrep_odbc_api.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) ../api/$(DEPDIR)/liblcmaps_jobrep_la-jobrep_odbc_api.Tpo ../api/$(DEPDIR)/liblcmaps_jobrep_la-jobrep_odbc_api.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='../api/jobrep_odbc_api.c' object='../api/liblcmaps_jobrep_la-jobrep_odbc_api.lo' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liblcmaps_jobrep_la_CFLAGS) $(CFLAGS) -c -o ../api/liblcmaps_jobrep_la-jobrep_odbc_api.lo `test -f '../api/jobrep_odbc_api.c' || echo '$(srcdir)/'`../api/jobrep_odbc_api.c
liblcmaps_jobrep_la-jobrep_data_handling.lo: jobrep_data_handling.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liblcmaps_jobrep_la_CFLAGS) $(CFLAGS) -MT liblcmaps_jobrep_la-jobrep_data_handling.lo -MD -MP -MF $(DEPDIR)/liblcmaps_jobrep_la-jobrep_data_handling.Tpo -c -o liblcmaps_jobrep_la-jobrep_data_handling.lo `test -f 'jobrep_data_handling.c' || echo '$(srcdir)/'`jobrep_data_handling.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblcmaps_jobrep_la-jobrep_data_handling.Tpo $(DEPDIR)/liblcmaps_jobrep_la-jobrep_data_handling.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='jobrep_data_handling.c' object='liblcmaps_jobrep_la-jobrep_data_handling.lo' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liblcmaps_jobrep_la_CFLAGS) $(CFLAGS) -c -o liblcmaps_jobrep_la-jobrep_data_handling.lo `test -f 'jobrep_data_handling.c' || echo '$(srcdir)/'`jobrep_data_handling.c
liblcmaps_jobrep_la-lcmaps_jobrep.lo: lcmaps_jobrep.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liblcmaps_jobrep_la_CFLAGS) $(CFLAGS) -MT liblcmaps_jobrep_la-lcmaps_jobrep.lo -MD -MP -MF $(DEPDIR)/liblcmaps_jobrep_la-lcmaps_jobrep.Tpo -c -o liblcmaps_jobrep_la-lcmaps_jobrep.lo `test -f 'lcmaps_jobrep.c' || echo '$(srcdir)/'`lcmaps_jobrep.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblcmaps_jobrep_la-lcmaps_jobrep.Tpo $(DEPDIR)/liblcmaps_jobrep_la-lcmaps_jobrep.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='lcmaps_jobrep.c' object='liblcmaps_jobrep_la-lcmaps_jobrep.lo' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liblcmaps_jobrep_la_CFLAGS) $(CFLAGS) -c -o liblcmaps_jobrep_la-lcmaps_jobrep.lo `test -f 'lcmaps_jobrep.c' || echo '$(srcdir)/'`lcmaps_jobrep.c
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
-rm -rf ../api/.libs ../api/_libs
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-am
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-am
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(LTLIBRARIES)
installdirs:
for dir in "$(DESTDIR)$(plugindir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-rm -f ../api/$(DEPDIR)/$(am__dirstamp)
-rm -f ../api/$(am__dirstamp)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic clean-libtool clean-pluginLTLIBRARIES \
mostlyclean-am
distclean: distclean-am
-rm -f ../api/$(DEPDIR)/liblcmaps_jobrep_la-jobrep_odbc_api.Plo
-rm -f ./$(DEPDIR)/liblcmaps_jobrep_la-jobrep_data_handling.Plo
-rm -f ./$(DEPDIR)/liblcmaps_jobrep_la-lcmaps_jobrep.Plo
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am: install-pluginLTLIBRARIES
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am:
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man:
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f ../api/$(DEPDIR)/liblcmaps_jobrep_la-jobrep_odbc_api.Plo
-rm -f ./$(DEPDIR)/liblcmaps_jobrep_la-jobrep_data_handling.Plo
-rm -f ./$(DEPDIR)/liblcmaps_jobrep_la-lcmaps_jobrep.Plo
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-pluginLTLIBRARIES
.MAKE: install-am install-data-am install-strip
.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
clean-generic clean-libtool clean-pluginLTLIBRARIES \
cscopelist-am ctags ctags-am distclean distclean-compile \
distclean-generic distclean-libtool distclean-tags distdir dvi \
dvi-am html html-am info info-am install install-am \
install-data install-data-am install-data-hook install-dvi \
install-dvi-am install-exec install-exec-am install-html \
install-html-am install-info install-info-am install-man \
install-pdf install-pdf-am install-pluginLTLIBRARIES \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags tags-am uninstall uninstall-am \
uninstall-pluginLTLIBRARIES
.PRECIOUS: Makefile
install-data-hook:
( \
cd $(DESTDIR)$(plugindir); \
for mod in jobrep ; do \
rm -f lcmaps_$$mod.mod; \
ln -s liblcmaps_$$mod@SHREXT@ lcmaps_$$mod.mod; \
done \
)
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
lcmaps-plugins-jobrep-1.5.7/src/jobrep/jobrep_test.h 0000644 0001750 0000144 00000001130 14574533163 017425 0000000 0000000 /*
* Copyright (c) Members of the EGEE Collaboration. 2004.
* See http://eu-egee.org/partners/ for details on the copyright holders.
* For license conditions see the license file or
* http://eu-egee.org/license.html
*/
extern int plugin_introspect(
int * argc,
lcmaps_argument_t ** argv
);
extern int plugin_initialize(
int argc,
char ** argv
);
extern int plugin_run(
int argc,
lcmaps_argument_t * argv
);
extern int plugin_terminate();
lcmaps-plugins-jobrep-1.5.7/src/jobrep/lcmaps_jobrep.c 0000644 0001750 0000144 00000046425 14574533163 017740 0000000 0000000 /*
* Copyright (c) Members of the IGE Project. 2012.
* See http://ige-project.eu for details on the copyright holders.
* For license conditions see the license file or
*/
/*
* Copyright (c) 2001 EU DataGrid.
* For license conditions see http://www.eu-datagrid.org/license.html
*
* Copyright (c) 2001, 2002, 2003, 2012 (and beyond) by
* Oscar Koeroo
* NIKHEF Amsterdam, the Netherlands
*/
/*!
\page lcmaps_jobrep.mod Job Repository plugin
\section posixsynopsis SYNOPSIS
\b lcmaps_jobrep.mod -vomsdir \ -certdir \ [server=\] [dsn=\]
[port=\] [driver=\] [database=\] [username=\]
[password=\] [-jr_config \]
\section posixdesc DESCRIPTION
The Job Repository module collects the user, job and user-mapping information when a job has been assigned
to a fabric and handled by LCMAPS. This information is stored into a SQL database. It is essential that
this information is kept secure due to the nature of the data it stores.
\section posixoptions OPTIONS
\subsection dns1 dsn=\
This will select the Data Source Name (DSN) that has been set in a odbc.ini file. In the odbc.ini file are one or more Database sources described with the needed settings to connect to a database. (Note: also partial connection settings are supported (3rd party support))
\subsection server1 server=\
specifies the host that has the database to connect to.
\subsection portnr1 port=\
specifies the port number on the host to override the default portnumber
\subsection driver1 driver=\
specifies the path and filename of the shared object distributed by the MyODBC package. ODBC needs a driver file to know what kind of database it will be connecting to.
\subsection database1 database=\
specifies the name of the database that has to be connected to. One machine can host several databases. The default name to fill in is: "JobRepository".
\subsection username1 username=\
specifies the database username that the LCMAPS module must use to authorize itself with.
\subsection password1 password=\
specifies the database password that the LCMAPS module must use to authorize itself with.
(Note: Disadviced to use this in the lcmaps.db file because it is publicly accessable)
\subsection jrconfig1 -jr_config \
The path and file specification leads to the root-only-readable file that should contain the database password (or more things like the username) to prevent that a simple user could comprimse the information that is in the database. There is a specific format for this file. All these database parameters must be semi-colon delimited. The same parameters as states above are used. This means that in the lcmaps.db all these parameters could be in this file. Also that is not really adviced due to practical reasons (shifting of servers for example) then you'll just have to edit one file. The lcmaps.db file in this case.
This means that you can mix these parameters as you like between the files. All these parameters are concatinated after each other. When parameters are more then ounce defined the last one in the concatinated string will be effectivly used.
(default: /opt/edg/etc/lcmaps/jobrep_config)
\subsection vomsdir1 -vomsdir \
This is the same directory as the LCMAPS VOMS Extract module looks at. This where the VO certificates are stored.
(default: /etc/grid-security/vomsdir/).
Note: this parameter can not be used in the jobrep_config file.
\subsection certdir1 -certdir \
This is the same directory as the LCMAPS VOMS Extract module looks at. This where the user certificates end up (temporarily)
(default: /etc/grid-security/certificates/).
Note: this parameter can not be used in the jobrep_config file.
*/
/*!
\file lcmaps_jobrep.c
\brief Plugin to get data for the Job Repository Database
\author Oscar Koeroo for the EU DataGrid.
*/
#define _XOPEN_SOURCE 600
/*****************************************************************************
Include header files
******************************************************************************/
#include "lcmaps_jobrep_config.h"
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#if defined(HAVE_LCMAPS_LCMAPS_PLUGIN_PROTOTYPES_H)
# include
#else
# include "lcmaps_plugin_prototypes.h"
#endif
#include "jobrep_odbc_api.h"
#include "jobrep_data_handling.h"
/******************************************************************************
Definitions
******************************************************************************/
#define PLUGIN_RUN 0
#define PLUGIN_VERIFY 1
/******************************************************************************
Module specific prototypes
******************************************************************************/
static int plugin_run_or_verify(int, lcmaps_argument_t *, int);
/******************************************************************************
Define module specific variables
******************************************************************************/
static char * jr_config_file = NULL;
static char * jr_db_dsn = NULL;
static char * jr_db_user = NULL;
static char * jr_db_pass = NULL;
static int test_jobrep = 0;
/*****************************************************************************/
/******************************************************************************
Function: plugin_initialize
Description:
Initialize plugin
Parameters:
argc, argv
argv[0]: the name of the plugin
Returns:
LCMAPS_MOD_SUCCESS : succes
LCMAPS_MOD_FAIL : failure
LCMAPS_MOD_NOFILE : db file not found (will halt LCMAPS initialization)
******************************************************************************/
int plugin_initialize(
int argc,
char ** argv
)
{
const char *logstr = PACKAGE_TARNAME "-" "plugin_initialize()";
int i;
lcmaps_log_debug(5,"%s: passed arguments:\n", logstr);
/* Run through argv array */
for (i = 1; i < argc; i++) {
if (((strcasecmp(argv[i], "-test") == 0) || (strcasecmp(argv[i], "--test") == 0))) {
test_jobrep = 1;
} else if ((strcasecmp(argv[i], "--odbcini") == 0) && (i + 1 < argc)) {
setenv("ODBCINI", argv[i + 1], 1);
i++;
} else if ((strcasecmp(argv[i], "--dsn") == 0) && (i + 1 < argc)) {
jr_db_dsn = argv[i + 1];
i++;
} else if ((strcasecmp(argv[i], "--username") == 0) && (i + 1 < argc)) {
jr_db_user = argv[i + 1];
i++;
} else if ((strcasecmp(argv[i], "--password") == 0) && (i + 1 < argc)) {
jr_db_pass = argv[i + 1];
i++;
} else {
lcmaps_log(LOG_ERR,"%s: Error in initialization parameter: %s (failure)\n", logstr, argv[i]);
return LCMAPS_MOD_FAIL;
}
/*
else if (
(strncmp(argv[i], "DSN=", 4) == 0) ||
(strncmp(argv[i], "HOST=", 5) == 0) ||
(strncmp(argv[i], "USER=", 5) == 0) ||
(strncmp(argv[i], "PASS=", 5) == 0) ||
(strncmp(argv[i], "DRIVER=", 7) == 0) ||
(strncmp(argv[i], "DATABASE=", 9) == 0) ||
(strncmp(argv[i], "PORT=", 5) == 0) ||
(strncmp(argv[i], "PASSWORD=", 9) == 0) ||
(strncmp(argv[i], "SERVER=", 7) == 0) ||
(strncmp(argv[i], "driver=", 7) == 0) ||
(strncmp(argv[i], "dsn=", 4) == 0) ||
(strncmp(argv[i], "host=", 5) == 0) ||
(strncmp(argv[i], "user=", 5) == 0) ||
(strncmp(argv[i], "port=", 5) == 0) ||
(strncmp(argv[i], "database=", 9) == 0) ||
(strncmp(argv[i], "server=", 7) == 0) ||
(strncmp(argv[i], "port=", 5) == 0) ||
(strncmp(argv[i], "password=", 9) == 0) ||
(strncmp(argv[i], "pass=", 5) == 0) )
{
if (strlen(connStr) == 0)
strncpy(connStr, argv[i], strlen(argv[i]));
else
sprintf(connStr, "%s;%s", connStr, argv[i]);
}
*/
}
/* Post checks */
if (jr_db_dsn == NULL) {
lcmaps_log(LOG_ERR, "%s: No DSN or Data Source Name provided in the lcmaps.db configuration file. Use --dsn .\n", logstr);
return LCMAPS_MOD_FAIL;
}
if (jr_db_user == NULL) {
lcmaps_log(LOG_ERR, "%s: No User provided in the lcmaps.db configuration file. Use --username .\n", logstr);
return LCMAPS_MOD_FAIL;
}
lcmaps_log_debug(3,"%s: Initialization succeeded\n", logstr);
return LCMAPS_MOD_SUCCESS;
}
/******************************************************************************
Function: plugin_introspect
Description:
return list of required arguments
Parameters:
Returns:
LCMAPS_MOD_SUCCESS : succes
LCMAPS_MOD_FAIL : failure
******************************************************************************/
int plugin_introspect(
int * argc,
lcmaps_argument_t ** argv
)
{
const char *logstr = PACKAGE_TARNAME "-" "plugin_introspect()";
static lcmaps_argument_t argList[] = {
{ "user_dn" , "char *" , 1, NULL},
{"px509_chain" , "STACK_OF(X509) *" , 0, NULL},
{ "job_request" , "char *" , 0, NULL},
{ NULL , NULL , -1, NULL}
};
lcmaps_log_debug(4,"%s: introspecting\n", logstr);
*argv = argList;
lcmaps_log_debug(5,"%s: before lcmaps_cntArgs()\n", logstr);
*argc = lcmaps_cntArgs(argList);
lcmaps_log_debug(5,"%s: address first argument: %p\n", logstr,(void*)argList);
lcmaps_log_debug(5,"%s: Introspect succeeded\n", logstr);
return LCMAPS_MOD_SUCCESS;
}
/******************************************************************************
Function: plugin_run
Description:
Gather credentials for LCMAPS
Parameters:
argc: number of arguments
argv: list of arguments
Returns:
LCMAPS_MOD_SUCCESS: authorization succeeded
LCMAPS_MOD_FAIL : authorization failed
******************************************************************************/
int plugin_run(
int argc,
lcmaps_argument_t * argv
)
{
return plugin_run_or_verify(argc, argv, PLUGIN_RUN);
}
/******************************************************************************
Function: plugin_verify
Description:
Verify if user is entitled to use local credentials based on his grid
credentials. This means that the site should already have been set up
by, e.g., LCMAPS in a previous run. This method will not try to setup
account leases, modify (distributed) passwd/group files, etc. etc.
The outcome should be identical to that of plugin_run().
In this particular case "plugin_verify()" is identical to "plugin_run()"
Parameters:
argc: number of arguments
argv: list of arguments
Returns:
LCMAPS_MOD_SUCCESS: authorization succeeded
LCMAPS_MOD_FAIL : authorization failed
******************************************************************************/
int plugin_verify(
int argc,
lcmaps_argument_t * argv
)
{
return plugin_run_or_verify(argc, argv, PLUGIN_VERIFY);
}
static int plugin_run_or_verify(
int argc,
lcmaps_argument_t * argv,
int lcmaps_mode
)
{
const char *logstr = PACKAGE_TARNAME "-" "plugin_run()";
struct jr_db_handle_s *db_handle = NULL;
void *lcmaps_dummy_arg_val = NULL;
STACK_OF(X509) *px509_chain = NULL;
char *dn = NULL, *gatekeeper_jm_id;
long user_id = -1;
long unix_uid_id = -1;
long eff_cred_id = -1;
/* The beginning */
if (lcmaps_mode != PLUGIN_RUN) {
lcmaps_log(LOG_ERR, "%s: attempt to run plugin in an unsupported mode: %d\n", logstr, lcmaps_mode);
goto fail_jobrep;
}
/* Test the connection to the ODBC coupling, and */
if (test_jobrep) {
/* Connect */
if ((db_handle = ODBC_Connect(jr_db_dsn, jr_db_user, jr_db_pass)) == NULL) {
lcmaps_log(LOG_ERR, "%s: Failed to connect to DSN \"%s\" with user \"%s\" and %s\n",
logstr, jr_db_dsn, jr_db_user, jr_db_pass ? "a password" : "no password");
goto fail_jobrep;
} else {
lcmaps_log(LOG_INFO, "%s: Succeeded to connect to DSN \"%s\" with user \"%s\" and %s\n",
logstr, jr_db_dsn, jr_db_user, jr_db_pass ? "a password" : "no password");
}
/* Disconnect from the database - Done testing */
ODBC_Disconnect(db_handle);
return LCMAPS_MOD_SUCCESS;
}
/* Fetch the X509 chain from the LCMAPS framework */
lcmaps_dummy_arg_val = lcmaps_getArgValue("px509_chain", "STACK_OF(X509) *", argc, argv);
if (lcmaps_dummy_arg_val && (px509_chain = *(STACK_OF(X509) **) lcmaps_dummy_arg_val)) {
lcmaps_log_debug(5,"%s: found X.509 chain.\n", logstr);
} else {
lcmaps_log (LOG_ERR,"%s: could not get the value of an X.509 chain or a PEM string. " \
"This is a bug or the framework is used from a services that didn't " \
"provide a certificate chain (via GSI credential or PEM string) as input. " \
"Unconfigure this plug-in and call for support.\n", logstr);
goto fail_jobrep;
}
/* Connect */
if ((db_handle = ODBC_Connect(jr_db_dsn, jr_db_user, jr_db_pass)) == NULL) {
lcmaps_log(LOG_ERR, "%s: Failed to connect to DSN \"%s\" with user \"%s\" and %s\n",
logstr, jr_db_dsn ? jr_db_dsn : "", jr_db_user ? jr_db_user : "", jr_db_pass ? "a password" : "no password");
goto fail_jobrep;
} else {
lcmaps_log_debug(1, "%s: Succeeded to connected to DSN \"%s\" with user \"%s\" and %s\n",
logstr, jr_db_dsn, jr_db_user, jr_db_pass ? "a password" : "no password");
}
/* Push Unix UID, Primary/Secondary GID Credentials to the database */
unix_uid_id = jobrep_push_unix_cred(db_handle);
if (unix_uid_id < 0) {
goto fail_jobrep;
}
/* Push certificate stack information into the database */
if (jobrep_push_certificates(db_handle, px509_chain) < 0) {
goto fail_jobrep;
}
/* Get the DN */
lcmaps_dummy_arg_val = lcmaps_getArgValue("user_dn", "char *", argc, argv);
if (lcmaps_dummy_arg_val && (dn = *(char **)lcmaps_dummy_arg_val)) {
lcmaps_log_debug(5,"%s: found dn: %s\n", logstr, dn);
} else {
lcmaps_log_debug(1,"%s: could not get value of dn !\n", logstr);
}
/* Pinpoint the EEC certificate in the chain and select/assign a user_id to
* link-up other user specific information - Result is negative or a user_id */
user_id = jobrep_assign_userid(db_handle, px509_chain, dn);
if (user_id < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to assign a user_id\n", logstr);
goto fail_jobrep;
}
/* Begin Transaction */
if (SQL_BeginTransaction(db_handle) < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to enable the use of transactions.\n", __func__);
goto fail_jobrep;
}
/* Create one Effective Credential ID record to hookup all the credentials */
eff_cred_id = jobrep_create_effective_credentials_main(db_handle);
if (eff_cred_id < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to create an effective credential record.\n", logstr);
goto fail_jobrep;
}
/* The GATEKEEPER_JM_ID is set in the file:
* gt5.2.2-all-source-installer/source-trees/gatekeeper/source/globus_gatekeeper.c:1473:
*/
gatekeeper_jm_id = getenv("GATEKEEPER_JM_ID");
if (gatekeeper_jm_id) {
lcmaps_log(LOG_DEBUG, "%s: The $GATEKEEPER_JM_ID is: %s\n", logstr, gatekeeper_jm_id);
if (jobrep_push_compute_job_info(db_handle, eff_cred_id, gatekeeper_jm_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to insert compute job information.\n", logstr);
goto fail_jobrep;
}
}
/* Push the VOMS FQANs from LCMAPS into the DB and hook them up to the Effective Credential ID */
if (jobrep_push_voms_fqans(db_handle, eff_cred_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to insert VOMS FQANs\n", logstr);
goto fail_jobrep;
}
/* Push the combination of the user_id and the eff_cred_id */
if (jobrep_push_effective_credential_user(db_handle, user_id, eff_cred_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to insert the user_id and eff_cred_id combination\n", logstr);
goto fail_jobrep;
}
/* Push the combination of the unix_uid_id and the eff_cred_id
* Requires the jobrep_push_unix_cred to have finished */
if (jobrep_push_effective_credential_unix_uid(db_handle, unix_uid_id, eff_cred_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to insert the unix_uid_id and eff_cred_id combination\n", logstr);
goto fail_jobrep;
}
/* Push all the Unix GIDs as mapped without a specific VOMS FQAN link.
* This could hold extra Unix GIDs that are orignating from other plug-ins
* then the native LCMAPS VOMS */
if (jobrep_push_effective_credential_unix_gids(db_handle, eff_cred_id) < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to insert the list of mapped Unix GIDs\n", __func__);
goto fail_jobrep;
}
/* End Transaction - Commit */
if (db_handle->use_transactions) {
SQL_Commit(db_handle);
}
/* Disconnect from the database */
ODBC_Disconnect(db_handle);
lcmaps_log(LOG_INFO, "%s: jobrep plugin succeeded\n", logstr);
return LCMAPS_MOD_SUCCESS;
fail_jobrep:
/* Disconnect from the database - Should Rollback */
if (db_handle && db_handle->use_transactions) {
/* Rollback if in Transaction */
SQL_Rollback(db_handle);
}
if (db_handle) {
ODBC_Disconnect(db_handle);
}
return LCMAPS_MOD_FAIL;
}
/******************************************************************************
Function: plugin_terminate
Description:
Terminate plugin
Parameters:
Returns:
LCMAPS_MOD_SUCCESS : succes
LCMAPS_MOD_FAIL : failure
******************************************************************************/
int plugin_terminate(void)
{
const char *logstr = PACKAGE_TARNAME "-" "plugin_terminate()";
lcmaps_log_debug(1,"%s: terminating\n", logstr);
if (jr_config_file) {
free(jr_config_file);
}
return LCMAPS_MOD_SUCCESS;
}
lcmaps-plugins-jobrep-1.5.7/src/api/ 0000755 0001750 0000144 00000000000 14574774166 014323 5 0000000 0000000 lcmaps-plugins-jobrep-1.5.7/src/api/jobrep_odbc_api.c 0000644 0001750 0000144 00000100244 14574533163 017477 0000000 0000000 /*
* Copyright (c) Members of the IGE Project 2012
* See http://ige-project.eu for details on the copyright holders.
* For license conditions see the license file
*/
/*
* Copyright (c) Members of the EGEE Collaboration. 2004.
* See http://eu-egee.org/partners/ for details on the copyright holders.
* For license conditions see the license file or
* http://eu-egee.org/license.html
*/
/*
* Copyright (c) 2001 EU DataGrid.
* For license conditions see http://www.eu-datagrid.org/license.html
*
* Copyright (c) 2001, 2002, 2003 by
* Oscar Koeroo
* NIKHEF Amsterdam, the Netherlands
*/
/*****************************************************************************
Include header files
******************************************************************************/
#define _XOPEN_SOURCE 500
#include "jobrep_odbc_api.h"
#include
#include
#include
#include
#include
#include
/******************************************************************************
Definitions
******************************************************************************/
/******************************************************************************
Module specific prototypes
******************************************************************************/
static int
ODBC_Errors (struct jr_db_handle_s *, short, const char *);
/******************************************************************************
Define module specific variables
******************************************************************************/
int
SQL_IgnoreErrors_Set(struct jr_db_handle_s *db_handle) {
if (db_handle == NULL) {
lcmaps_log(LOG_ERR, "%s called without a database handle.\n", __func__);
return -1;
}
db_handle->ignore_errors = 1;
return 0;
}
int
SQL_IgnoreErrors_Reset(struct jr_db_handle_s *db_handle) {
if (db_handle == NULL) {
lcmaps_log(LOG_ERR, "%s called without a database handle.\n", __func__);
return -1;
}
db_handle->ignore_errors = 0;
return 0;
}
static int
ODBC_Errors (struct jr_db_handle_s *db_handle, short last_error, const char *where) {
unsigned char buf[250];
unsigned char sqlstate[15];
unsigned char *search;
size_t i = 0;
if (where) {
lcmaps_log(LOG_ERR, "Error detected in %s with return code: %s(%d)\n",
where, SQL_ERROR_CODE_STRING(last_error), last_error);
} else {
lcmaps_log(LOG_ERR, "Error detected with return code: %s(%d)\n",
SQL_ERROR_CODE_STRING(last_error), last_error);
}
if (db_handle == NULL) {
lcmaps_log(LOG_ERR, "%s: ODBC_Errors() called without a database handle.\n", __func__);
return 0;
}
/* Get statement errors */
if (db_handle->jobrep_henv && db_handle->jobrep_hdbc && db_handle->jobrep_hstmt) {
while (SQLError (db_handle->jobrep_henv, db_handle->jobrep_hdbc, db_handle->jobrep_hstmt,
sqlstate, NULL, buf, (SQLSMALLINT)sizeof(buf), NULL) == SQL_SUCCESS) {
search = buf;
for (i = 0; i < sizeof(buf); i++) {
if (strncmp((char *)search, "Duplicate", strlen("Duplicate")) == 0) {
return 1;
} else {
search++;
}
}
lcmaps_log(LOG_ERR, "[SQL/Statement Error @ %s : %s]%s, SQLSTATE=%s\n",
where, SQL_ERROR_CODE_STRING(last_error), buf, sqlstate);
}
}
/* Get connection errors */
if (db_handle->jobrep_henv && db_handle->jobrep_hdbc) {
while (SQLError (db_handle->jobrep_henv, db_handle->jobrep_hdbc, SQL_NULL_HSTMT,
sqlstate, NULL, buf, (SQLSMALLINT)sizeof(buf), NULL) == SQL_SUCCESS) {
lcmaps_log(LOG_ERR, "[Connection Error @ %s : %s]%s, SQLSTATE=%s\n",
where, SQL_ERROR_CODE_STRING(last_error), buf, sqlstate);
}
}
/* Get environmental errors */
if (db_handle->jobrep_henv) {
while (SQLError (db_handle->jobrep_henv, SQL_NULL_HDBC, SQL_NULL_HSTMT,
sqlstate, NULL, buf, (SQLSMALLINT)sizeof(buf), NULL) == SQL_SUCCESS) {
lcmaps_log(LOG_ERR, "[Environmental Error @ %s : %s]%s, SQLSTATE=%s\n",
where, SQL_ERROR_CODE_STRING(last_error), buf, sqlstate);
}
}
return 0;
}
int
ODBC_Test (char *dsn, char *username, char *password)
{
struct jr_db_handle_s *db_handle = NULL;
db_handle = ODBC_Connect (dsn, username, password);
if (db_handle == NULL) {
return -1;
}
lcmaps_log_debug(LOG_INFO, "%s: Successfully connected to DSN \"%s\"\n", __func__, dsn);
if (db_handle->jobrep_connected) {
if (ODBC_Disconnect(db_handle) < 0) {
lcmaps_log(LOG_ERR, "%s: Failed to gracefully disconnect from DSN \"%s\"\n", __func__, dsn);
return -1;
}
}
return 0;
}
struct jr_db_handle_s *
ODBC_Connect (char *dsn, char *username, char *password) {
SQLRETURN V_OD_erg = 0;
unsigned char V_OD_msg[200];
unsigned char V_OD_stat[10];
SQLINTEGER V_OD_err;
SQLSMALLINT V_OD_mlen;
struct jr_db_handle_s *jr_db_handle = NULL;
/* Allocate */
jr_db_handle = malloc(sizeof(struct jr_db_handle_s));
if (jr_db_handle == NULL) {
lcmaps_log(LOG_ERR, "%s: Could not allocate %lu bytes for the DB handle.\n",
__func__, (long unsigned)sizeof(struct jr_db_handle_s));
goto failure;
}
/* Cleanup */
memset(jr_db_handle, 0, sizeof(struct jr_db_handle_s));
V_OD_erg = SQLAllocHandle(SQL_HANDLE_ENV, SQL_NULL_HANDLE, &(jr_db_handle->jobrep_henv));
if ((V_OD_erg != SQL_SUCCESS) && (V_OD_erg != SQL_SUCCESS_WITH_INFO)) {
lcmaps_log(LOG_ERR, "%s: Error AllocHandle\n", __func__);
goto failure;
}
V_OD_erg = SQLSetEnvAttr(jr_db_handle->jobrep_henv, SQL_ATTR_ODBC_VERSION, (void*)SQL_OV_ODBC3, 0);
if ((V_OD_erg != SQL_SUCCESS) && (V_OD_erg != SQL_SUCCESS_WITH_INFO)) {
lcmaps_log(LOG_ERR, "%s: Error SetEnv\n", __func__);
SQLFreeHandle(SQL_HANDLE_ENV, jr_db_handle->jobrep_henv);
goto failure;
}
V_OD_erg = SQLAllocHandle(SQL_HANDLE_DBC, jr_db_handle->jobrep_henv, &(jr_db_handle->jobrep_hdbc));
if ((V_OD_erg != SQL_SUCCESS) && (V_OD_erg != SQL_SUCCESS_WITH_INFO)) {
lcmaps_log(LOG_ERR, "%s: Error AllocHDB\n", __func__);
SQLFreeHandle(SQL_HANDLE_ENV, jr_db_handle->jobrep_henv);
goto failure;
}
SQLSetConnectAttr(jr_db_handle->jobrep_hdbc, SQL_LOGIN_TIMEOUT, (SQLPOINTER *)5, 0);
V_OD_erg = SQLConnect(jr_db_handle->jobrep_hdbc,
(SQLCHAR*) dsn, SQL_NTS,
(SQLCHAR*) username, SQL_NTS,
(SQLCHAR*) password, SQL_NTS);
if ((V_OD_erg != SQL_SUCCESS) && (V_OD_erg != SQL_SUCCESS_WITH_INFO)) {
lcmaps_log(LOG_ERR, "%s: Error SQLConnect\n", __func__);
SQLGetDiagRec(SQL_HANDLE_DBC, jr_db_handle->jobrep_hdbc, (SQLSMALLINT)1,
V_OD_stat, &V_OD_err, V_OD_msg, (SQLSMALLINT)sizeof(V_OD_msg), &V_OD_mlen);
ODBC_Errors(jr_db_handle, V_OD_erg, (char *)V_OD_msg);
if (jr_db_handle->jobrep_henv) {
SQLFreeHandle(SQL_HANDLE_ENV, jr_db_handle->jobrep_henv);
}
goto failure;
}
#if 0
status = SQLDriverConnect (jobrep_hdbc, 0, (UCHAR *) dataSource, SQL_NTS, (UCHAR *) buf, sizeof (buf), &buflen, SQL_DRIVER_COMPLETE);
if (status != SQL_SUCCESS && status != SQL_SUCCESS_WITH_INFO)
return -4;
/* Turn AUTOCOMMIT off so SQL statements can be grouped into a */
/* transaction */
status = SQLSetConnectOption(jobrep_hdbc, SQL_AUTOCOMMIT, SQL_AUTOCOMMIT_OFF);
if (status != SQL_SUCCESS)
{
fprintf(stderr, "Unable to turn AUTOCOMMIT off (status=%d)\n", status);
return -5;
}
/*SQLSetConnectOption (hdbc, SQL_TXN_ISOLATION_OPTION, SQL_TRANSACTION_SERIALIZABLE); */
/*SQLSetConnectOption (hdbc, SQL_TXN_ISOLATION_OPTION, SQL_TRANSACTION_REPEATABLE_READ); */
SQLSetConnectOption (jobrep_hdbc, SQL_TXN_ISOLATION_OPTION, SQL_TRANSACTION_READ_UNCOMMITTED);
/*SQLSetConnectOption (hdbc, SQL_TXN_ISOLATION_OPTION, SQL_TXN_READ_COMMITTED); */
SQLSetConnectOption (jobrep_hdbc, SQL_OPT_TRACEFILE, (UDWORD) "\\SQL.LOG");
jobrep_connected = 1;
#endif
jr_db_handle->jobrep_connected = 1;
return jr_db_handle;
failure:
if (jr_db_handle) {
free(jr_db_handle);
}
return NULL;
}
int
ODBC_Disconnect(struct jr_db_handle_s *db_handle) {
if (db_handle == NULL) {
return -1;
}
/* Close and clean up everything */
SQL_QueryCloseAndClean(db_handle);
if (db_handle->jobrep_connected) {
SQLDisconnect(db_handle->jobrep_hdbc);
db_handle->jobrep_connected = 0;
}
if (db_handle->jobrep_hdbc)
SQLFreeHandle(SQL_HANDLE_DBC, db_handle->jobrep_hdbc);
if (db_handle->jobrep_henv)
SQLFreeHandle(SQL_HANDLE_ENV, db_handle->jobrep_henv);
free(db_handle);
/* db_handle = NULL;*/ /* No point, we're returning... */
return 0;
}
int
SQL_BeginTransaction(struct jr_db_handle_s *db_handle) {
SQLRETURN status = 0;
if (db_handle == NULL) {
return -1;
}
status = SQLSetConnectOption(db_handle->jobrep_hdbc, SQL_AUTOCOMMIT, SQL_AUTOCOMMIT_OFF);
if (status != SQL_SUCCESS) {
lcmaps_log(LOG_ERR, "%s: Unable to turn AUTOCOMMIT off (status=%d)\n", __func__, status);
ODBC_Errors(db_handle, status, "SQLSetConnectOption");
return -2;
}
/* Set use_transactions */
db_handle->use_transactions = 1;
status = SQLSetConnectOption(db_handle->jobrep_hdbc, SQL_TXN_ISOLATION_OPTION, SQL_TRANSACTION_READ_UNCOMMITTED);
if (status != SQL_SUCCESS) {
lcmaps_log(LOG_ERR, "%s: Unable to enable the isolation option SQL_TRANSACTION_READ_UNCOMMITTED\n", __func__);
ODBC_Errors(db_handle, status, "SQLSetConnectOption");
return -2;
}
return 0;
#if 0
status = SQLDriverConnect (jobrep_hdbc, 0, (UCHAR *) dataSource, SQL_NTS, (UCHAR *) buf, sizeof (buf), &buflen, SQL_DRIVER_COMPLETE);
status = SQLSetConnectOption(jobrep_hdbc, SQL_AUTOCOMMIT, SQL_AUTOCOMMIT_OFF);
if (status != SQL_SUCCESS && status != SQL_SUCCESS_WITH_INFO)
return -4;
/* Turn AUTOCOMMIT off so SQL statements can be grouped into a */
/* transaction */
/*SQLSetConnectOption (hdbc, SQL_TXN_ISOLATION_OPTION, SQL_TRANSACTION_SERIALIZABLE); */
/*SQLSetConnectOption (hdbc, SQL_TXN_ISOLATION_OPTION, SQL_TRANSACTION_REPEATABLE_READ); */
SQLSetConnectOption (jobrep_hdbc, SQL_TXN_ISOLATION_OPTION, SQL_TRANSACTION_READ_UNCOMMITTED);
/*SQLSetConnectOption (hdbc, SQL_TXN_ISOLATION_OPTION, SQL_TXN_READ_COMMITTED); */
SQLSetConnectOption (jobrep_hdbc, SQL_OPT_TRACEFILE, (UDWORD) "\\SQL.LOG");
jobrep_connected = 1;
#endif
}
/******************************************************************************
Function: SQL_Commit
Description:
Commits the active transaction
Parameters:
Returns:
SQL_SUCCESS : succes (no results)
!SQL_SUCCESS : failure
******************************************************************************/
int
SQL_Commit(struct jr_db_handle_s *db_handle) {
if (db_handle == NULL) {
return -1;
}
if (SQLTransact(db_handle->jobrep_henv, db_handle->jobrep_hdbc, SQL_COMMIT) == SQL_SUCCESS) {
return 0;
} else {
return -2;
}
}
/******************************************************************************
Function: SQL_Rollback
Description:
Rolls back the transaction
Parameters:
Returns:
SQL_SUCCESS : succes (no results)
!SQL_SUCCESS : failure
******************************************************************************/
int
SQL_Rollback(struct jr_db_handle_s *db_handle) {
if (db_handle == NULL) {
return -1;
}
if (SQLTransact(db_handle->jobrep_henv, db_handle->jobrep_hdbc, SQL_ROLLBACK) == SQL_SUCCESS) {
return 0;
} else {
return -2;
}
}
/******************************************************************************
Function: SQL_BindParam
Description:
SQLBindParameter wrapper to bind parameters to an SQLExecute or SQLExecDirect after an SQLPrepare
Parameters:
Returns:
0 : Success
-1 : Initialization error
-2 : SQLBindParameter() failure
******************************************************************************/
int
SQL_BindParam(struct jr_db_handle_s *db_handle,
SQLUSMALLINT param_number,
SQLSMALLINT c_type, SQLSMALLINT sql_type,
SQLPOINTER data) {
SQLRETURN res;
if (db_handle == NULL) {
return -1;
}
res = SQLBindParameter(db_handle->jobrep_hstmt,
param_number,
SQL_PARAM_INPUT,
c_type,
sql_type,
0,
(SQLSMALLINT)0,
data,
0,
NULL);
if (res != SQL_SUCCESS) {
ODBC_Errors(db_handle, res, "SQLBindParam");
return -2;
}
return 0;
}
/******************************************************************************
Function: SQL_Prepare
Description:
Prepare the SQL query, can be followed by an SQL_BindParam and SQL_Query
Parameters:
Returns:
0 : succes
-1 : init error
-2 : SQLPrepare failure
******************************************************************************/
int
SQL_Prepare (struct jr_db_handle_s *db_handle, SQLCHAR *sql) {
SQLRETURN res = 0;
if ((db_handle == NULL) || (sql == NULL)) {
return -1;
}
if (SQL_QueryCloseAndClean(db_handle) != 0) {
lcmaps_log(LOG_ERR, "%s: the SQL_QueryCloseAndClean() failed.\n", __func__);
return -1;
}
/* Allocate the statement handle */
res = SQLAllocHandle(SQL_HANDLE_STMT, db_handle->jobrep_hdbc, &(db_handle->jobrep_hstmt));
if ((res != SQL_SUCCESS) && (res != SQL_SUCCESS_WITH_INFO)) {
ODBC_Errors(db_handle, res, "Failure in AllocStatement\n");
return -1;
}
/* Prepare */
res = SQLPrepare (db_handle->jobrep_hstmt, sql, SQL_NTS);
if (res != SQL_SUCCESS) {
ODBC_Errors(db_handle, res, "SQLPrepare");
return -2;
}
db_handle->querystate = PREPARED;
return 0;
}
/******************************************************************************
Function: SQL_Exec
Description:
Executes an SQL statement without a resultset, only a boolean will be returned
Example: Update, insert, create, drop
Parameters:
Returns:
0 : Success
-1 : Initialization error
-2 : SQLExecDirect() error
-3 : Cleanup error
******************************************************************************/
int
SQL_Exec(struct jr_db_handle_s *db_handle) {
SQLRETURN res = 0;
if (db_handle == NULL) {
return -1;
}
/* Check if the query is prepared */
if (db_handle->querystate != PREPARED) {
lcmaps_log(LOG_ERR, "%s: SQL_Exec() called without SQL_Prepare()\n", __func__);
res = -1;
goto cleanup;
}
/* In Query */
db_handle->querystate = QUERY;
/* SQL Execute! */
if ((res = SQLExecute (db_handle->jobrep_hstmt)) != SQL_SUCCESS) {
if (!db_handle->ignore_errors) {
ODBC_Errors(db_handle, res, "SQLExecute\n");
}
res = -2;
goto cleanup;
}
/* Release handle */
SQL_QueryClose(db_handle);
cleanup:
db_handle->querystate = NONE;
return res;
}
/******************************************************************************
Function: SQL_Query
Description:
Must be preceeded by an SQL_Prepare and optionally an SQL_BindParam.
Parameters:
Returns:
0 : succes
-1 : failure
-2 : failure
******************************************************************************/
SQLRETURN
SQL_Query(struct jr_db_handle_s *db_handle) {
SQLRETURN res = SQL_SUCCESS;
SQLULEN i = 0;
SQLUSMALLINT colCnt,colNum=0;
SQLULEN rowCnt,rowNum=0;
char colName[255];
short colType = 0;
short colCType = 0;
SQLULEN colPrecision = 0;
SQLLEN colIndicator = 0;
short colScale = 0;
short colNullable = 0;
if (db_handle == NULL) {
res = SQL_INVALID_HANDLE;
goto sql_query_cleanup;
}
if (db_handle->querystate != PREPARED) {
lcmaps_log(LOG_ERR, "%s: SQL_Query() called without SQL_Prepare()\n", __func__);
res = SQL_ERROR;
goto sql_query_cleanup;
}
/* In Query */
db_handle->querystate = QUERY;
/* SQL Execute! */
if ((res = SQLExecute (db_handle->jobrep_hstmt)) != SQL_SUCCESS) {
ODBC_Errors(db_handle, res, "SQLExecute");
goto sql_query_cleanup;
}
/* Got a Query, clean the ResultSet, if any is set. */
if (db_handle->resultset != NULL) {
lcmaps_log(LOG_ERR, "%s: The memory for the SQL resultset was not cleaned.\n", __func__);
res = SQL_ERROR;
goto sql_query_cleanup;
}
/* New resultset */
db_handle->resultset = malloc(sizeof(TResultSet));
if (db_handle->resultset == NULL) {
lcmaps_log(LOG_ERR, "%s: Unable to allocate the resultset\n", __func__);
res = SQL_ERROR;
goto sql_query_cleanup;
}
/* Get column count */
res = SQLNumResultCols(db_handle->jobrep_hstmt, &(db_handle->resultset->colCnt));
if (res != SQL_SUCCESS || db_handle->resultset->colCnt<0) {
ODBC_Errors(db_handle, res, "SQLNumResultCols");
goto sql_query_cleanup;
}
/* Get the row count */
res = SQLRowCount(db_handle->jobrep_hstmt, &(db_handle->resultset->rowCnt));
if (res != SQL_SUCCESS || db_handle->resultset->rowCnt<0) {
ODBC_Errors(db_handle, res, "SQLRowCount");
goto sql_query_cleanup;
}
/* Build the ResultSet Grid *
* Note: colCnt is successfully retrieved, hence will be non-negative so
* cast explicitly to unsigned */
colCnt=(SQLUSMALLINT)db_handle->resultset->colCnt;
rowCnt=(SQLULEN)db_handle->resultset->rowCnt;
db_handle->resultset->columns = malloc(sizeof(TColumn) * colCnt);
if (db_handle->resultset->columns == NULL) {
lcmaps_log(LOG_ERR, "%s: Error in allocating %lu bytes\n",
__func__, (long unsigned)sizeof(TColumn) * colCnt);
res = SQL_ERROR;
goto sql_query_cleanup;
}
memset(db_handle->resultset->columns, 0, sizeof(TColumn) * colCnt);
db_handle->resultset->data = malloc(sizeof(TRow) * rowCnt);
if (db_handle->resultset->data == NULL) {
lcmaps_log(LOG_ERR, "%s: Error in allocating %lu bytes\n",
__func__, (long unsigned)sizeof(TRow) * rowCnt);
res = SQL_ERROR;
goto sql_query_cleanup;
}
memset(db_handle->resultset->data, 0, sizeof(TRow) * rowCnt);
for (i = 0; i < rowCnt; i++) {
db_handle->resultset->data[i] = malloc(sizeof(TField) * colCnt);
if (db_handle->resultset->data[i] == NULL) {
lcmaps_log(LOG_ERR, "%s: Error in allocating %lu bytes\n",
__func__, (long unsigned)sizeof(TField) * colCnt);
res = SQL_ERROR;
goto sql_query_cleanup;
}
memset(db_handle->resultset->data[i], 0, sizeof(TField) * colCnt);
}
/* Let's get us a dataset */
for (rowNum=0; rowNumjobrep_hstmt);
if (res == SQL_NO_DATA_FOUND) {
goto sql_query_cleanup;
}
if (res != SQL_SUCCESS) {
ODBC_Errors(db_handle, res, "SQLFetch");
goto sql_query_cleanup;
}
/* Read a row, column by column */
for (colNum = 0; colNum < colCnt; colNum++) {
void *data;
SQLLEN bufsize_bytes;
void *data_final = NULL;
void *data2 = NULL;
void *data3 = NULL;
size_t total_buf = 0;
SQLLEN offset = 0;
int needs_concat = 0;
res = SQLDescribeCol(db_handle->jobrep_hstmt, (SQLUSMALLINT)(colNum + 1),
(UCHAR *) colName, (SQLSMALLINT)sizeof(colName),
NULL, &colType, &colPrecision,
&colScale, &colNullable);
if (res != SQL_SUCCESS) {
ODBC_Errors(db_handle, res, "SQLDescribeCol");
goto sql_query_cleanup;
}
bufsize_bytes = 0;
data = NULL;
switch(colType) {
case SQL_UNKNOWN_TYPE :
/* Error? */
break;
case SQL_DECIMAL :
case SQL_NUMERIC :
colCType = SQL_C_CHAR;
bufsize_bytes = sizeof(char) * 2;
break;
case SQL_BIGINT :
case SQL_INTEGER :
colCType = SQL_C_LONG;
bufsize_bytes = sizeof(long);
break;
case SQL_SMALLINT :
colCType = SQL_C_SHORT;
bufsize_bytes = sizeof(short);
break;
case SQL_FLOAT :
case SQL_REAL :
colCType = SQL_C_FLOAT;
bufsize_bytes = sizeof(float);
break;
case SQL_DOUBLE :
colCType = SQL_C_DOUBLE;
bufsize_bytes = sizeof(double);
break;
#if 0
#if (ODBCVER >= 0x0300)
case SQL_DATETIME :
break;
#endif
#endif
case SQL_CHAR :
case SQL_VARCHAR :
colCType = SQL_C_CHAR;
bufsize_bytes = sizeof(char) * 50;
break;
default :
lcmaps_log(LOG_ERR, "%s: Unknown datatype of value %d\n", __func__, colType);
res = SQL_ERROR;
goto sql_query_cleanup;
}
/********************************
Start of getting data with SQLGetData() The data will be read and made
available in the 'data_final' field. This can be casted to what ever
the colCType indicates.
********************************/
data = malloc((size_t)bufsize_bytes);
data2 = NULL;
data3 = NULL;
total_buf = 0;
offset = 0;
needs_concat = 0;
data_final = data;
do {
/* Fetch data for this field */
memset(data, 0, (size_t)bufsize_bytes);
res = SQLGetData (db_handle->jobrep_hstmt,
(SQLUSMALLINT)(colNum + 1),
(SQLSMALLINT)colCType, data, bufsize_bytes,
&colIndicator);
if (res == SQL_SUCCESS) {
if (needs_concat) {
/* If there is more data available for a given field, continue here */
total_buf += (size_t)bufsize_bytes;
/* Expand memory into a new buffer and copy the current buffer in it. */
if (data2 == NULL) {
data3 = malloc(sizeof(char) * total_buf);
} else {
data3 = realloc(data2, sizeof(char) * total_buf);
}
if (data3 == NULL) {
/* Allocation error */
free(data2);
res = SQL_ERROR;
goto sql_query_cleanup;
}
data2 = data3;
memcpy((char*)data2+offset, data, (size_t)bufsize_bytes);
/* Move the offset with the buffer size minus 1, because the last
* byte is a \0 */
offset += bufsize_bytes - 1;
data_final = data2;
}
break; /* Done */
} else if (res != SQL_SUCCESS_WITH_INFO) {
ODBC_Errors(db_handle, res, "SQLGetData");
goto sql_query_cleanup;
}
/* Signal that the last read buffer needs to be concattinated as a final step */
needs_concat = 1;
/* If there is more data available for a given field, continue here */
total_buf += (size_t)bufsize_bytes;
/* Expand memory into a new buffer and copy the current buffer in it. */
if (data2 == NULL) {
data3 = malloc(sizeof(char) * total_buf);
} else {
data3 = realloc(data2, sizeof(char) * total_buf);
}
if (data3 == NULL) {
/* Allocation error */
free(data2);
res = SQL_ERROR;
goto sql_query_cleanup;
}
data2 = data3;
memcpy((char*)data2+offset, data, (size_t)bufsize_bytes);
/* Move the offset with the buffer size minus 1, because the last
* byte is a \0 */
offset += bufsize_bytes - 1;
data_final = data2;
} while (res == SQL_SUCCESS_WITH_INFO);
/* Hook up the fetched results into the TResultSet */
db_handle->resultset->columns[colNum].columnname = strdup(colName);
db_handle->resultset->columns[colNum].type = colType;
db_handle->resultset->data[rowNum][colNum].fieldname = strdup(colName);
db_handle->resultset->data[rowNum][colNum].type = colCType;
db_handle->resultset->data[rowNum][colNum].byte_size = total_buf;
switch(colCType) {
case SQL_C_CHAR :
db_handle->resultset->data[rowNum][colNum].v.v_string = (char *)data_final;
break;
case SQL_C_LONG :
db_handle->resultset->data[rowNum][colNum].v.v_long = *((long *)data_final);
break;
case SQL_C_SHORT:
db_handle->resultset->data[rowNum][colNum].v.v_short = *((short *)data_final);
break;
case SQL_C_FLOAT:
db_handle->resultset->data[rowNum][colNum].v.v_float = *((float *)data_final);
break;
case SQL_C_DOUBLE:
db_handle->resultset->data[rowNum][colNum].v.v_double = *((double *)data_final);
break;
}
}
} /* row loop */
sql_query_cleanup:
SQL_QueryClose(db_handle);
return res;
}
/******************************************************************************
Function: SQL_QueryCloseAndClean
Description:
Closing a query.
Parameters:
Returns:
0 : success
-1 : failure
******************************************************************************/
int
SQL_QueryCloseAndClean(struct jr_db_handle_s *db_handle) {
if (db_handle == NULL) {
return -1;
}
SQL_QueryClose(db_handle);
SQL_TResultSet_free(db_handle->resultset);
db_handle->resultset = NULL;
return 0;
}
/******************************************************************************
Function: SQL_QueryCloseAndClean
Description:
Closing a query.
Parameters:
Returns:
0 : succes
-1 : failure
******************************************************************************/
int
SQL_QueryClose(struct jr_db_handle_s *db_handle) {
SQLRETURN sts = 0;
if (db_handle == NULL) {
return -1;
}
if (db_handle->querystate == QUERY) {
if (db_handle->jobrep_hstmt) {
sts = SQLCloseCursor(db_handle->jobrep_hstmt);
if (sts != SQL_SUCCESS) {
ODBC_Errors(db_handle, sts, "CloseCursor");
return -2;
}
}
db_handle->querystate = PREPARED;
}
if (db_handle->querystate == PREPARED) {
SQLFreeHandle (SQL_HANDLE_STMT, db_handle->jobrep_hstmt);
db_handle->jobrep_hstmt = NULL;
}
/* Resetting state */
db_handle->querystate = NONE;
SQL_IgnoreErrors_Reset(db_handle);
return 0;
}
/******************************************************************************
Function: SQL_TResultSet_free
Description:
Frees a TResultSet structure.
Parameters:
TResultSet *
Returns:
void
******************************************************************************/
void
SQL_TResultSet_free(TResultSet *resultset) {
int i = 0, j = 0;
if (resultset == NULL)
return;
if ((resultset->colCnt <= 0) && (resultset->rowCnt <= 0)) {
free(resultset);
resultset = NULL;
return;
}
/* Free columnnames */
for (i = 0; i < resultset->colCnt; i++) {
if (resultset->columns[i].columnname != NULL) {
free(resultset->columns[i].columnname);
}
}
/* Free data from all TField structures with it's TField structs */
for (i = 0; i < resultset->rowCnt; i++) {
for (j = 0; j < resultset->colCnt; j++) {
free(resultset->data[i][j].fieldname);
if (resultset->data[i][j].type == SQL_C_CHAR) {
free(resultset->data[i][j].v.v_string);
}
}
free(resultset->data[i]);
resultset->data[i] = NULL;
}
if (resultset->data) free(resultset->data);
resultset->data = NULL;
if (resultset->columns) free(resultset->columns);
resultset->columns = NULL;
free(resultset);
/* resultset = NULL;*/ /* No point, we're returning... */
}
/******************************************************************************
Function: SQL_printfResultSet
Description:
prints the resultset to the stdout
Parameters:
TResultSet * result
Returns:
0 : succes (no results)
!0 : failure
******************************************************************************/
int
SQL_printfResultSet (TResultSet *resultset) {
return SQL_fprintfResultSet (stdout, resultset);
}
/******************************************************************************
Function: SQL_fprintfResultSet
Description:
prints the resultset to the filestream, 'stream'
Parameters:
TResultSet * result
FILE * stream
Returns:
0 : succes (no results)
!0 : failure
******************************************************************************/
int
SQL_fprintfResultSet (FILE *stream, TResultSet *resultset)
{
int i = 0, j = 0;
if (resultset == NULL)
return -1;
if ( (resultset->colCnt == 0) || ( resultset->rowCnt == 0) )
return -2;
for (j = 0; j < resultset->colCnt; j++) {
fprintf(stream, "|%25s|", resultset->columns[j].columnname);
}
fprintf(stream, "\n");
for (i = 0; i < (resultset->colCnt * 25 + resultset->colCnt + 3); i++)
fprintf(stream, "-");
fprintf(stream, "\n");
for (i = 0; i < resultset->rowCnt; i++) {
for (j = 0; j < resultset->colCnt; j++) {
switch (resultset->data[i][j].type) {
case SQL_C_CHAR :
fprintf(stream, "|%25s|", resultset->data[i][j].v.v_string);
break;
case SQL_C_LONG :
fprintf(stream, "|%25ld|", resultset->data[i][j].v.v_long);
break;
case SQL_C_SHORT:
fprintf(stream, "|%25d|", resultset->data[i][j].v.v_short);
break;
case SQL_C_FLOAT:
fprintf(stream, "|%25f|", resultset->data[i][j].v.v_float);
break;
case SQL_C_DOUBLE:
fprintf(stream, "|%25f|", resultset->data[i][j].v.v_double);
break;
default:
fprintf(stream, "|%25ld|", resultset->data[i][j].v.v_long);
break;
}
}
fprintf(stream, "\n");
}
return 0;
}
#if 0
TParamType * globalParameters = NULL;
/*
* Connect to the datasource
*
* The connect string can have the following parts and they refer to
* the values in the odbc.ini file
*
* DSN= [mandatory]
* HOST= [optional - value of Host]
* SVT= [optional - value of ServerType]
* DATABASE= [optional - value of Database]
* OPTIONS= [optional - value of Options]
* UID= [optional - value of LastUser]
* PWD= [optional]
* READONLY= [optional - value of ReadOnly]
* FBS= [optional - value of FetchBufferSize]
*
* Examples:
*
* HOST=star;SVT=Informix 5;UID=demo;PWD=demo;DATABASE=stores5
*
* DSN=stores5_informix;PWD=demo
*/
/******************************************************************************
Function: SQL_SetLock
Description:
Sets a lock on the given table with the kindOfLock Specified.
Parameters:
char * table
int kindOfLock (LOCK_READ, LOCK_WRITE)
Returns:
0 : succes (no results)
!0 : failure
******************************************************************************/
int SQL_SetLock (char * table, int kindOfLock)
{
char R[1000];
char W[1000];
if (kindOfLock == LOCK_WRITE)
{
sprintf(W, "lock tables %s write", table);
return SQL_Query(W);
}
else if (kindOfLock == LOCK_READ)
{
sprintf(R, "lock tables %s read", table);
return SQL_Query(R);
}
else if (kindOfLock == (LOCK_READ + LOCK_WRITE))
{
sprintf(R, "lock tables %s read", table);
sprintf(W, "lock tables %s write", table);
return (SQL_Query(R) + SQL_Query(W));
}
return -1;
}
/******************************************************************************
Function: SQL_UnLock
Description:
Unlocks the tables that are lock by this connection.
Parameters:
Returns:
0 : succes (no results)
!0 : failure
******************************************************************************/
int SQL_UnLock()
{
return SQL_Query("unlock tables");
}
#endif
lcmaps-plugins-jobrep-1.5.7/src/api/jobrep_odbc_api.h 0000644 0001750 0000144 00000013362 14574533163 017510 0000000 0000000 /*
* Copyright (c) Members of the IGE Project 2012
* See http://eu-egee.org/partners/ for details on the copyright holders.
* For license conditions see the license file or
* http://eu-egee.org/license.html
*/
/*
* Copyright (c) 2001 EU DataGrid.
* For license conditions see http://www.eu-datagrid.org/license.html
*
* Copyright (c) 2001, 2002, 2003 by
* Oscar Koeroo
* NIKHEF Amsterdam, the Netherlands
*/
#ifndef JOBREP_ODBC_API_H
#define JOBREP_ODBC_API_H
/*****************************************************************************
Include header files
******************************************************************************/
#include
#include
/******************************************************************************
Definitions
******************************************************************************/
#define SQL_ERROR_CODE_STRING(x) \
x == SQL_SUCCESS ? "SQL_SUCCESS" : \
x == SQL_SUCCESS_WITH_INFO ? "SQL_SUCCESS_WITH_INFO" : \
x == SQL_ERROR ? "SQL_ERROR" : \
x == SQL_INVALID_HANDLE ? "SQL_INVALID_HANDLE" : \
x == SQL_NEED_DATA ? "SQL_NEED_DATA" : \
x == SQL_NO_DATA_FOUND ? "SQL_NO_DATA_FOUND" : \
"unknown"
#define SQL_C_TYPE_STRING(x) \
x == SQL_C_CHAR ? "SQL_C_CHAR" : \
x == SQL_C_LONG ? "SQL_C_LONG" : \
x == SQL_C_SHORT ? "SQL_C_SHORT" : \
x == SQL_C_FLOAT ? "SQL_C_FLOAT" : \
x == SQL_C_DOUBLE ? "SQL_C_DOUBLE" : \
"unknown"
typedef struct TField_s
{
char * fieldname;
int type;
size_t byte_size;
union {
char v_char;
char *v_string;
int v_int;
short v_short;
long v_long;
float v_float;
double v_double;
void *raw;
} v;
} TField;
typedef TField * TRow;
typedef struct TColumn_s
{
char *columnname;
int type;
} TColumn;
typedef struct TResultSet_s
{
TRow *data;
TColumn *columns;
SQLSMALLINT colCnt;
SQLLEN rowCnt;
} TResultSet;
typedef enum QueryState_e {
NONE,
PREPARED,
QUERY
} QueryState;
struct jr_db_handle_s {
SQLHENV jobrep_henv;
SQLHDBC jobrep_hdbc;
SQLHSTMT jobrep_hstmt;
short jobrep_connected;
QueryState querystate;
short ignore_errors;
short use_transactions;
TResultSet *resultset;
};
/******************************************************************************
Module specific prototypes
******************************************************************************/
struct jr_db_handle_s *ODBC_Connect (char *dsn, char *username, char *password);
int ODBC_Test (char *, char *, char *);
int ODBC_Disconnect(struct jr_db_handle_s *db_handle);
int SQL_BeginTransaction(struct jr_db_handle_s *db_handle);
int SQL_Commit(struct jr_db_handle_s *db_handle);
int SQL_Rollback(struct jr_db_handle_s *db_handle);
int SQL_BindParam(struct jr_db_handle_s *db_handle,
SQLUSMALLINT param_number,
SQLSMALLINT c_type, SQLSMALLINT sql_type,
SQLPOINTER data);
int SQL_Prepare (struct jr_db_handle_s *db_handle, SQLCHAR *sql);
int SQL_Exec(struct jr_db_handle_s *db_handle);
SQLRETURN SQL_Query (struct jr_db_handle_s *db_handle);
int SQL_QueryClose(struct jr_db_handle_s *db_handle);
int SQL_QueryCloseAndClean(struct jr_db_handle_s *db_handle);
void SQL_TResultSet_free (TResultSet *resultset);
int SQL_printfResultSet (TResultSet *resultset);
int SQL_fprintfResultSet (FILE *stream, TResultSet *resultset);
int SQL_IgnoreErrors_Set(struct jr_db_handle_s *db_handle);
int SQL_IgnoreErrors_Reset(struct jr_db_handle_s *db_handle);
#if 0
#include
#include
/******************************************************************************
Definitions
******************************************************************************/
#define MAXCOLS 32
#define EMPTYSET 5
#define LOCK_READ 1
#define LOCK_WRITE 2
typedef struct TField_s
{
char * fieldname;
char * value;
int type;
} TField;
typedef TField * TRow;
typedef struct TColumn_s
{
char * columnname;
int type;
} TColumn;
typedef struct TResultSet_s
{
TRow * data;
TColumn * columns;
int colCnt;
int rowCnt;
} TResultSet;
typedef struct cert_s
{
X509 * X509cert;
char * certStr;
char * PEM;
char * subject_name;
char * issuer_name;
char * strNotBefore;
char * strNotAfter;
} TSimpleCert;
typedef struct params_s
{
char * id;
char * value;
int type;
} TParamType;
/******************************************************************************
Module specific prototypes
******************************************************************************/
void ODBC_MesgHandler (char *);
int SQL_SetLock (char * table, int kindOfLock);
int SQL_UnLock ();
int SQL_Commit ();
int SQL_Rollback ();
int SQL_Query (char *);
int SQL_SetParameter (char *);
int SQL_GetQueryResult(TResultSet **);
int SQL_GetValue (TResultSet *, char *, char **);
int SQL_printfResultSet (TResultSet *);
int SQL_fprintfResultSet (FILE *, TResultSet *);
void TResultSet_free (TResultSet *);
void TSimpleCert_free (TSimpleCert *, int);
/******************************************************************************
Define module specific variables
******************************************************************************/
#endif
#endif /* JOBREP_ODBC_API_H */
lcmaps-plugins-jobrep-1.5.7/src/Makefile.am 0000644 0001750 0000144 00000000655 14574533163 015522 0000000 0000000 # Copyright (c) Members of the EGEE Collaboration. 2004.
# See http://eu-egee.org/partners/ for details on the copyright holders.
# For license conditions see the license file or
# http://eu-egee.org/license.html
#
# Authors: Martijn Steenbakkers
#
# $Id: Makefile.am,v 1.1 2005-01-04 15:24:32 okoeroo Exp $
# Define the targets to be built here
SUBDIRS = \
jobrep
lcmaps-plugins-jobrep-1.5.7/src/Makefile.in 0000644 0001750 0000144 00000047133 14574774131 015537 0000000 0000000 # Makefile.in generated by automake 1.16.5 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2021 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# Copyright (c) Members of the EGEE Collaboration. 2004.
# See http://eu-egee.org/partners/ for details on the copyright holders.
# For license conditions see the license file or
# http://eu-egee.org/license.html
#
# Authors: Martijn Steenbakkers
#
# $Id: Makefile.am,v 1.1 2005-01-04 15:24:32 okoeroo Exp $
# Define the targets to be built here
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = src
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/project/lcmaps.m4 \
$(top_srcdir)/project/libtool.m4 \
$(top_srcdir)/project/ltoptions.m4 \
$(top_srcdir)/project/ltsugar.m4 \
$(top_srcdir)/project/ltversion.m4 \
$(top_srcdir)/project/lt~obsolete.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = lcmaps_jobrep_config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
distdir distdir-am
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
lcmaps_jobrep_config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
DIST_SUBDIRS = $(SUBDIRS)
am__DIST_COMMON = $(srcdir)/Makefile.in \
$(srcdir)/lcmaps_jobrep_config.h.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DISTBIN = @DISTBIN@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FILECMD = @FILECMD@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LCMAPS_BASIC_INTERFACE_CFLAGS = @LCMAPS_BASIC_INTERFACE_CFLAGS@
LCMAPS_BASIC_INTERFACE_LIBS = @LCMAPS_BASIC_INTERFACE_LIBS@
LCMAPS_CFLAGS = @LCMAPS_CFLAGS@
LCMAPS_INTERFACE_CFLAGS = @LCMAPS_INTERFACE_CFLAGS@
LCMAPS_INTERFACE_LIBS = @LCMAPS_INTERFACE_LIBS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MODULEDIR = @MODULEDIR@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SHREXT = @SHREXT@
STRIP = @STRIP@
UNIXODBC_CFLAGS = @UNIXODBC_CFLAGS@
UNIXODBC_LIBS = @UNIXODBC_LIBS@
VERSION = @VERSION@
WORKDIR = @WORKDIR@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = \
jobrep
all: lcmaps_jobrep_config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign src/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
lcmaps_jobrep_config.h: stamp-h1
@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/lcmaps_jobrep_config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status src/lcmaps_jobrep_config.h
$(srcdir)/lcmaps_jobrep_config.h.in: $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f lcmaps_jobrep_config.h stamp-h1
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-recursive
all-am: Makefile lcmaps_jobrep_config.h
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
.MAKE: $(am__recursive_targets) all install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
check-am clean clean-generic clean-libtool cscopelist-am ctags \
ctags-am distclean distclean-generic distclean-hdr \
distclean-libtool distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am
.PRECIOUS: Makefile
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
lcmaps-plugins-jobrep-1.5.7/NEWS 0000644 0001750 0000144 00000005133 14574533163 013372 0000000 0000000 * Version 1.5.7:
- Sync serialnumber code with verify-proxy plugin, making code OpenSSL-1.1
API compliant
- Cleanup manpage (and cleanup packaging of the documentation)
* Version 1.5.6:
- Further cleanup including manpage and compiler warnings.
- Fix license.
* Version 1.5.5:
- Further cleanup.
* Version 1.5.4:
- Minor bugfixes and cleanup.
* Version 1.5.3:
- Adds the compute_jobs table and stored the environment variable
$GATEKEEPER_JM_ID (when available) into the compute_jobs table together
with the eff_cred_id (the unique key to all the other credential data).
This addition is done to be able to cross-link data into GridSAFE.
* Version 1.5.2:
Bugfix:
- wrong types for certain variables lead to SIGABRT on RH6/64.
* Version 1.5.1:
Bugfix release:
- fix blocking typo in jobrep-create-basic.sql: fqan_id -> voms_fqan_id
- improved installation instructions
* Version 1.5.0:
- Revamped version of the jobrep API as part of the IGE Project.
- Updated man page doc/lcmaps_jobrep.mod.8
- The plug-in depricates the libjobrepository or libjobrep as all of the
ODBC interactions are handled from within the plugin.
- Lots of settings have been removed, only the following options are left
in the plug-in:
--test (optional)
--dsn
--username
--password (optional, when provided in the
odbc.ini file)
- The removed options, like ODBC database driver and network details like
host and port, are to be set in the odbc.ini file. The man page of the
plug-in has a basic example.
- Renewed database schema is included in the package as PDF.
* Version 1.4.1:
- Include manpages for the plug-in and the database utility,
originally found in the Debian packaging.
* Version 1.4.0:
- Changing the log messages to match the logging method used in
LCMAPS version 1.5.0, which will be using the Syslog native log
priority/levels.
** Plugin lcmaps-plugins-jobrepository
Resurrected an old plugin that is capable of logging the LCMAPS
mapping state into a relational database schema for detailed
account mapping information gathering.
** Generic to all components:
- adjusted to be able to use EPEL, EMI and gLite packages and
system native library installations
- cleanup of unused files and support for distribution tarball.
- provide pkg-config files
- All LCMAPS public header files are all in ${includeDir}/lcmaps/*.h
lcmaps-plugins-jobrep-1.5.7/LICENSE 0000644 0001750 0000144 00000026136 14574533163 013706 0000000 0000000
Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
"License" shall mean the terms and conditions for use, reproduction,
and distribution as defined by Sections 1 through 9 of this document.
"Licensor" shall mean the copyright owner or entity authorized by
the copyright owner that is granting the License.
"Legal Entity" shall mean the union of the acting entity and all
other entities that control, are controlled by, or are under common
control with that entity. For the purposes of this definition,
"control" means (i) the power, direct or indirect, to cause the
direction or management of such entity, whether by contract or
otherwise, or (ii) ownership of fifty percent (50%) or more of the
outstanding shares, or (iii) beneficial ownership of such entity.
"You" (or "Your") shall mean an individual or Legal Entity
exercising permissions granted by this License.
"Source" form shall mean the preferred form for making modifications,
including but not limited to software source code, documentation
source, and configuration files.
"Object" form shall mean any form resulting from mechanical
transformation or translation of a Source form, including but
not limited to compiled object code, generated documentation,
and conversions to other media types.
"Work" shall mean the work of authorship, whether in Source or
Object form, made available under the License, as indicated by a
copyright notice that is included in or attached to the work
(an example is provided in the Appendix below).
"Derivative Works" shall mean any work, whether in Source or Object
form, that is based on (or derived from) the Work and for which the
editorial revisions, annotations, elaborations, or other modifications
represent, as a whole, an original work of authorship. For the purposes
of this License, Derivative Works shall not include works that remain
separable from, or merely link (or bind by name) to the interfaces of,
the Work and Derivative Works thereof.
"Contribution" shall mean any work of authorship, including
the original version of the Work and any modifications or additions
to that Work or Derivative Works thereof, that is intentionally
submitted to Licensor for inclusion in the Work by the copyright owner
or by an individual or Legal Entity authorized to submit on behalf of
the copyright owner. For the purposes of this definition, "submitted"
means any form of electronic, verbal, or written communication sent
to the Licensor or its representatives, including but not limited to
communication on electronic mailing lists, source code control systems,
and issue tracking systems that are managed by, or on behalf of, the
Licensor for the purpose of discussing and improving the Work, but
excluding communication that is conspicuously marked or otherwise
designated in writing by the copyright owner as "Not a Contribution."
"Contributor" shall mean Licensor and any individual or Legal Entity
on behalf of whom a Contribution has been received by Licensor and
subsequently incorporated within the Work.
2. Grant of Copyright License. Subject to the terms and conditions of
this License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
copyright license to reproduce, prepare Derivative Works of,
publicly display, publicly perform, sublicense, and distribute the
Work and such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of
this License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
(except as stated in this section) patent license to make, have made,
use, offer to sell, sell, import, and otherwise transfer the Work,
where such license applies only to those patent claims licensable
by such Contributor that are necessarily infringed by their
Contribution(s) alone or by combination of their Contribution(s)
with the Work to which such Contribution(s) was submitted. If You
institute patent litigation against any entity (including a
cross-claim or counterclaim in a lawsuit) alleging that the Work
or a Contribution incorporated within the Work constitutes direct
or contributory patent infringement, then any patent licenses
granted to You under this License for that Work shall terminate
as of the date such litigation is filed.
4. Redistribution. You may reproduce and distribute copies of the
Work or Derivative Works thereof in any medium, with or without
modifications, and in Source or Object form, provided that You
meet the following conditions:
(a) You must give any other recipients of the Work or
Derivative Works a copy of this License; and
(b) You must cause any modified files to carry prominent notices
stating that You changed the files; and
(c) You must retain, in the Source form of any Derivative Works
that You distribute, all copyright, patent, trademark, and
attribution notices from the Source form of the Work,
excluding those notices that do not pertain to any part of
the Derivative Works; and
(d) If the Work includes a "NOTICE" text file as part of its
distribution, then any Derivative Works that You distribute must
include a readable copy of the attribution notices contained
within such NOTICE file, excluding those notices that do not
pertain to any part of the Derivative Works, in at least one
of the following places: within a NOTICE text file distributed
as part of the Derivative Works; within the Source form or
documentation, if provided along with the Derivative Works; or,
within a display generated by the Derivative Works, if and
wherever such third-party notices normally appear. The contents
of the NOTICE file are for informational purposes only and
do not modify the License. You may add Your own attribution
notices within Derivative Works that You distribute, alongside
or as an addendum to the NOTICE text from the Work, provided
that such additional attribution notices cannot be construed
as modifying the License.
You may add Your own copyright statement to Your modifications and
may provide additional or different license terms and conditions
for use, reproduction, or distribution of Your modifications, or
for any such Derivative Works as a whole, provided Your use,
reproduction, and distribution of the Work otherwise complies with
the conditions stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise,
any Contribution intentionally submitted for inclusion in the Work
by You to the Licensor shall be under the terms and conditions of
this License, without any additional terms or conditions.
Notwithstanding the above, nothing herein shall supersede or modify
the terms of any separate license agreement you may have executed
with Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade
names, trademarks, service marks, or product names of the Licensor,
except as required for reasonable and customary use in describing the
origin of the Work and reproducing the content of the NOTICE file.
7. Disclaimer of Warranty. Unless required by applicable law or
agreed to in writing, Licensor provides the Work (and each
Contributor provides its Contributions) on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
implied, including, without limitation, any warranties or conditions
of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
PARTICULAR PURPOSE. You are solely responsible for determining the
appropriateness of using or redistributing the Work and assume any
risks associated with Your exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory,
whether in tort (including negligence), contract, or otherwise,
unless required by applicable law (such as deliberate and grossly
negligent acts) or agreed to in writing, shall any Contributor be
liable to You for damages, including any direct, indirect, special,
incidental, or consequential damages of any character arising as a
result of this License or out of the use or inability to use the
Work (including but not limited to damages for loss of goodwill,
work stoppage, computer failure or malfunction, or any and all
other commercial damages or losses), even if such Contributor
has been advised of the possibility of such damages.
9. Accepting Warranty or Additional Liability. While redistributing
the Work or Derivative Works thereof, You may choose to offer,
and charge a fee for, acceptance of support, warranty, indemnity,
or other liability obligations and/or rights consistent with this
License. However, in accepting such obligations, You may act only
on Your own behalf and on Your sole responsibility, not on behalf
of any other Contributor, and only if You agree to indemnify,
defend, and hold each Contributor harmless for any liability
incurred by, or claims asserted against, such Contributor by reason
of your accepting any such warranty or additional liability.
END OF TERMS AND CONDITIONS
APPENDIX: How to apply the Apache License to your work.
To apply the Apache License to your work, attach the following
boilerplate notice, with the fields enclosed by brackets "[]"
replaced with your own identifying information. (Don't include
the brackets!) The text should be enclosed in the appropriate
comment syntax for the file format. We also recommend that a
file or class name and description of purpose be included on the
same "printed page" as the copyright notice for easier
identification within third-party archives.
Copyright [yyyy] [name of copyright owner]
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
lcmaps-plugins-jobrep-1.5.7/missing 0000755 0001750 0000144 00000015336 14574774131 014302 0000000 0000000 #! /bin/sh
# Common wrapper for a few potentially missing GNU programs.
scriptversion=2018-03-07.03; # UTC
# Copyright (C) 1996-2021 Free Software Foundation, Inc.
# Originally written by Fran,cois Pinard , 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
echo 1>&2 "Try '$0 --help' for more information"
exit 1
fi
case $1 in
--is-lightweight)
# Used by our autoconf macros to check whether the available missing
# script is modern enough.
exit 0
;;
--run)
# Back-compat with the calling convention used by older automake.
shift
;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
to PROGRAM being missing or too old.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
Supported PROGRAM values:
aclocal autoconf autoheader autom4te automake makeinfo
bison yacc flex lex help2man
Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
'g' are ignored when checking the name.
Send bug reports to ."
exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing $scriptversion (GNU Automake)"
exit $?
;;
-*)
echo 1>&2 "$0: unknown '$1' option"
echo 1>&2 "Try '$0 --help' for more information"
exit 1
;;
esac
# Run the given program, remember its exit status.
"$@"; st=$?
# If it succeeded, we are done.
test $st -eq 0 && exit 0
# Also exit now if we it failed (or wasn't found), and '--version' was
# passed; such an option is passed most likely to detect whether the
# program is present and works.
case $2 in --version|--help) exit $st;; esac
# Exit code 63 means version mismatch. This often happens when the user
# tries to use an ancient version of a tool on a file that requires a
# minimum version.
if test $st -eq 63; then
msg="probably too old"
elif test $st -eq 127; then
# Program was missing.
msg="missing on your system"
else
# Program was found and executed, but failed. Give up.
exit $st
fi
perl_URL=https://www.perl.org/
flex_URL=https://github.com/westes/flex
gnu_software_URL=https://www.gnu.org/software
program_details ()
{
case $1 in
aclocal|automake)
echo "The '$1' program is part of the GNU Automake package:"
echo "<$gnu_software_URL/automake>"
echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
echo "<$gnu_software_URL/autoconf>"
echo "<$gnu_software_URL/m4/>"
echo "<$perl_URL>"
;;
autoconf|autom4te|autoheader)
echo "The '$1' program is part of the GNU Autoconf package:"
echo "<$gnu_software_URL/autoconf/>"
echo "It also requires GNU m4 and Perl in order to run:"
echo "<$gnu_software_URL/m4/>"
echo "<$perl_URL>"
;;
esac
}
give_advice ()
{
# Normalize program name to check for.
normalized_program=`echo "$1" | sed '
s/^gnu-//; t
s/^gnu//; t
s/^g//; t'`
printf '%s\n' "'$1' is $msg."
configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
case $normalized_program in
autoconf*)
echo "You should only need it if you modified 'configure.ac',"
echo "or m4 files included by it."
program_details 'autoconf'
;;
autoheader*)
echo "You should only need it if you modified 'acconfig.h' or"
echo "$configure_deps."
program_details 'autoheader'
;;
automake*)
echo "You should only need it if you modified 'Makefile.am' or"
echo "$configure_deps."
program_details 'automake'
;;
aclocal*)
echo "You should only need it if you modified 'acinclude.m4' or"
echo "$configure_deps."
program_details 'aclocal'
;;
autom4te*)
echo "You might have modified some maintainer files that require"
echo "the 'autom4te' program to be rebuilt."
program_details 'autom4te'
;;
bison*|yacc*)
echo "You should only need it if you modified a '.y' file."
echo "You may want to install the GNU Bison package:"
echo "<$gnu_software_URL/bison/>"
;;
lex*|flex*)
echo "You should only need it if you modified a '.l' file."
echo "You may want to install the Fast Lexical Analyzer package:"
echo "<$flex_URL>"
;;
help2man*)
echo "You should only need it if you modified a dependency" \
"of a man page."
echo "You may want to install the GNU Help2man package:"
echo "<$gnu_software_URL/help2man/>"
;;
makeinfo*)
echo "You should only need it if you modified a '.texi' file, or"
echo "any other file indirectly affecting the aspect of the manual."
echo "You might want to install the Texinfo package:"
echo "<$gnu_software_URL/texinfo/>"
echo "The spurious makeinfo call might also be the consequence of"
echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
echo "want to install GNU make:"
echo "<$gnu_software_URL/make/>"
;;
*)
echo "You might have modified some files without having the proper"
echo "tools for further handling them. Check the 'README' file, it"
echo "often tells you about the needed prerequisites for installing"
echo "this package. You may also peek at any GNU archive site, in"
echo "case some other package contains this missing '$1' program."
;;
esac
}
give_advice "$1" | sed -e '1s/^/WARNING: /' \
-e '2,$s/^/ /' >&2
# Propagate the correct exit status (expected to be 127 for a program
# not found, 63 for a program that failed due to version mismatch).
exit $st
# Local variables:
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
lcmaps-plugins-jobrep-1.5.7/AUTHORS 0000644 0001750 0000144 00000000241 14574533172 013736 0000000 0000000 Oscar Koeroo
Mischa Sall\'e
David Groep
NIKHEF Amsterdam, the Netherlands
lcmaps-plugins-jobrep-1.5.7/utils/ 0000755 0001750 0000144 00000000000 14574774166 014123 5 0000000 0000000 lcmaps-plugins-jobrep-1.5.7/utils/jobrep-drop-total-database.sql 0000644 0001750 0000144 00000000061 14574533163 021655 0000000 0000000 USE jobrepository;
DROP DATABASE jobrepository;
lcmaps-plugins-jobrep-1.5.7/utils/jobrep-admin.sh.in 0000644 0001750 0000144 00000003000 14574533163 017332 0000000 0000000 #!/bin/sh
sqldir="@sqldir@"
dbapwd=;
install() {
user_dbapwd_question $1;
query="\. $sqldir/jobrep-create-basic.sql";
query_exec "root" "$dbapwd" "$query";
}
destroy() {
user_dbapwd_question $1;
query="\. $sqldir/jobrep-drop-total-database.sql";
query_exec "root" "$dbapwd" "$query";
}
show() {
user_dbapwd_question $1;
query="show databases";
query_exec "root" "$dbapwd" "$query" "jobrepository";
query="show tables";
query_exec "root" "$dbapwd" "$query" "jobrepository";
}
user_dbapwd_question () {
if [ -r "$1" -a -s "$1" ]; then
dbapwd=`cat $1`;
else
stty_orig=`stty -g`
echo -n "Enter database password (root): "
stty -echo
read dbapwd
stty $stty_orig
echo
fi
}
query_exec () {
# Parameter list:
# 1: dbauser
# 2: dbapwd
# 3: query
## 4: database
if [ "$4" != "" ]; then
if [ "$2" != "" ];
then
mysql -u$1 -p$2 -D $4 -e "$3";
else
mysql -u$1 -D $4 -e "$3";
fi
else
if [ "$2" != "" ];
then
mysql -u$1 -p$2 -e "$3";
else
mysql -u$1 -e "$3";
fi
fi
}
case "$1" in
install)
install $2;
;;
destroy)
destroy $2;
;;
show)
show $2;
;;
*)
echo $"Usage: $0 install []"
echo $"Usage: $0 destroy []"
echo $"Usage: $0 show []"
exit 1
;;
esac
lcmaps-plugins-jobrep-1.5.7/utils/jobrep-create-basic.sql 0000644 0001750 0000144 00000013227 14574533172 020360 0000000 0000000 create database jobrepository;
use jobrepository;
/* Generic */
CREATE TABLE certificates (
cert_id INT NOT NULL AUTO_INCREMENT,
subject VARCHAR(255) NOT NULL,
issuer VARCHAR(255) NOT NULL,
purpose INT NOT NULL,
serialnr VARCHAR(255) NOT NULL,
valid_from DATETIME NULL,
valid_until DATETIME NULL,
PRIMARY KEY (cert_id),
UNIQUE (subject, issuer, serialnr),
INDEX (subject)
)
TYPE=InnoDB;
CREATE TABLE users (
user_id INT NOT NULL AUTO_INCREMENT,
cert_id INT NOT NULL,
PRIMARY KEY (user_id),
UNIQUE (cert_id),
FOREIGN KEY (cert_id) REFERENCES certificates (cert_id)
ON DELETE CASCADE
)
TYPE=InnoDB;
CREATE TABLE voms_fqans (
voms_fqan_id INT NOT NULL AUTO_INCREMENT,
fqan VARCHAR(255) NOT NULL,
PRIMARY KEY (voms_fqan_id),
unique(fqan)
)
TYPE=InnoDB;
CREATE TABLE unix_uids (
unix_uid_id INT NOT NULL AUTO_INCREMENT,
uid INT NOT NULL,
uid_name VARCHAR(255) NULL,
PRIMARY KEY (unix_uid_id),
INDEX (uid),
UNIQUE (uid, uid_name)
)
TYPE=InnoDB;
/* Note: must add the primary_gid note in it's new N-M use table */
CREATE TABLE unix_gids (
unix_gid_id INT NOT NULL AUTO_INCREMENT,
gid INT NOT NULL,
gid_name VARCHAR(255) NULL,
PRIMARY KEY (unix_gid_id),
INDEX(gid),
UNIQUE (gid, gid_name)
)
TYPE=InnoDB;
CREATE TABLE unix_uid_voms_fqans (
unix_uid_voms_fqan_id INT NOT NULL AUTO_INCREMENT,
registration_datetime DATETIME NOT NULL,
unix_uid_id INT NOT NULL,
voms_fqan_id INT NOT NULL,
PRIMARY KEY (unix_uid_voms_fqan_id),
UNIQUE (unix_uid_id, voms_fqan_id)
)
TYPE=InnoDB;
CREATE TABLE unix_gid_voms_fqans (
unix_gid_voms_fqan_id INT NOT NULL AUTO_INCREMENT,
registration_datetime DATETIME NOT NULL,
unix_gid_id INT NOT NULL,
voms_fqan_id INT NOT NULL,
is_primary INT NOT NULL,
PRIMARY KEY (unix_gid_voms_fqan_id),
UNIQUE (unix_gid_id, voms_fqan_id, is_primary)
)
TYPE=InnoDB;
CREATE TABLE credential_sources (
credential_source_id INT NOT NULL,
credential_source VARCHAR(255) NOT NULL,
PRIMARY KEY (credential_source_id),
UNIQUE (credential_source)
)
TYPE=InnoDB;
CREATE TABLE effective_credentials (
eff_cred_id INT NOT NULL AUTO_INCREMENT,
registration_datetime DATETIME NOT NULL,
credential_source_id INT NULL,
PRIMARY KEY (eff_cred_id),
FOREIGN KEY (credential_source_id) REFERENCES credential_sources (credential_source_id)
ON DELETE NO ACTION
)
TYPE=InnoDB;
CREATE TABLE compute_jobs (
eff_cred_id INT NOT NULL,
gatekeeper_jm_id VARCHAR(255) NOT NULL,
PRIMARY KEY (eff_cred_id, gatekeeper_jm_id)
)
TYPE=InnoDB;
CREATE TABLE effective_credentials_unix_uid_voms (
eff_cred_id INT NOT NULL,
unix_uid_voms_fqan_id INT NOT NULL,
PRIMARY KEY (eff_cred_id, unix_uid_voms_fqan_id)
)
TYPE=InnoDB;
CREATE TABLE effective_credentials_unix_gid_voms (
eff_cred_id INT NOT NULL,
unix_gid_voms_fqan_id INT NOT NULL,
PRIMARY KEY (eff_cred_id, unix_gid_voms_fqan_id)
)
TYPE=InnoDB;
CREATE TABLE effective_credential_users (
eff_cred_id INT NOT NULL,
user_id INT NOT NULL,
PRIMARY KEY (eff_cred_id, user_id)
)
TYPE=InnoDB;
CREATE TABLE effective_credential_unix_uids (
eff_cred_id INT NOT NULL,
unix_uid_id INT NOT NULL,
PRIMARY KEY (eff_cred_id, unix_uid_id)
)
TYPE=InnoDB;
CREATE TABLE effective_credential_unix_gids (
eff_cred_id INT NOT NULL,
unix_gid_id INT NOT NULL,
is_primary INT NOT NULL,
PRIMARY KEY (eff_cred_id, unix_gid_id, is_primary)
)
TYPE=InnoDB;
CREATE TABLE voms_servers (
server_id INT NOT NULL AUTO_INCREMENT,
server_dn VARCHAR(255) NOT NULL,
server_ca VARCHAR(255) NULL,
PRIMARY KEY (server_id)
)
TYPE=InnoDB;
CREATE TABLE voms_attributes (
voms_attribute_id INT NOT NULL AUTO_INCREMENT,
valid_from DATETIME NULL,
valid_until DATETIME NULL,
voms_fqan_id INT NOT NULL,
server_id INT NULL,
user_id INT NOT NULL,
PRIMARY KEY (voms_attribute_id),
INDEX (voms_fqan_id),
FOREIGN KEY (voms_fqan_id) REFERENCES voms_fqans (voms_fqan_id)
ON DELETE NO ACTION
ON UPDATE CASCADE,
FOREIGN KEY (server_id) REFERENCES voms_servers (server_id)
ON DELETE NO ACTION
ON UPDATE CASCADE,
INDEX (user_id),
FOREIGN KEY (user_id) REFERENCES users (user_id)
ON DELETE NO ACTION
ON UPDATE CASCADE
)
TYPE=InnoDB;
/*
grant select on JobRepository.* to jobrep_script@'%.nikhef.nl' IDENTIFIED BY 'jobrep_script';
grant insert on JobRepository.jobstatus to jobrep_script@'%.nikhef.nl' IDENTIFIED BY 'jobrep_script';
grant select, insert, update on JobRepository.* to lcmaps_jobrep@'%.nikhef.nl' IDENTIFIED BY 'jobrep_lcmaps';
*/
lcmaps-plugins-jobrep-1.5.7/utils/Makefile.am 0000644 0001750 0000144 00000003644 14574533172 016074 0000000 0000000 ## $Id: Makefile.am,v 1.3 2005-10-07 12:03:24 okoeroo Exp $
## Define the targets to be built here
# Note: use datadir, not datarootdir: EL5 doesn't have it.
sqldir = $(datadir)/jobrepository/sql
dist_sql_DATA = jobrep-create-basic.sql \
jobrep-drop-total-database.sql
sbin_SCRIPTS = jobrep-admin
# See Automake manual (9.1 Executable Scripts)
EXTRA_DIST = jobrep-admin.sh.in
CLEANFILES = jobrep-admin
jobrep-admin: jobrep-admin.sh.in Makefile
$(edit) $< >$@
chmod +x $@
edit = sed \
-e 's|@bindir[@]|$(bindir)|g' \
-e 's|@pkgdatadir[@]|$(pkgdatadir)|g' \
-e 's|@sqldir[@]|$(sqldir)|g' \
-e 's|@prefix[@]|$(prefix)|g'
# edg-jobrep-vo-to-unix \
# edg-jobrep-status-update \
# edg-jobrep-database-create \
# edg-jobrep-database-drop-all \
# edg-jobrep-database-recreate \
# edg-jobrep-drop.sql \
# edg-jobrep-database-create.1 \
# edg-jobrep-database-drop-all.1 \
# edg-jobrep-database-recreate.1
##man_MANS = edg-jobrep-status-update.1 edg-jobrep-vo-to-unix.1
###man_MANS = edg-jobrep-status-update.1 \
### edg-jobrep-vo-to-unix.1 \
### edg-jobrep-database-create.1 \
### edg-jobrep-database-drop-all.1 \
### edg-jobrep-database-recreate.1
### %.1: %
### pod2man --section=1 $< > $<.1
#edg-jobrep-vo-to-unix.1: edg-jobrep-vo-to-unix
# pod2man --section=1 edg-jobrep-vo-to-unix > edg-jobrep-vo-to-unix.1
#
#edg-jobrep-status-update.1: edg-jobrep-status-update
# pod2man --section=1 edg-jobrep-status-update > edg-jobrep-status-update.1
##edg-jobrep-database-create.1: edg-jobrep-database-create
## pod2man --section=1 edg-jobrep-database-create_txt > edg-jobrep-database-create.1
##edg-jobrep-database-drop-all.1: edg-jobrep-database-drop-all
## pod2man --section=1 edg-jobrep-database-drop-all_txt > edg-jobrep-database-drop-all.1
##edg-jobrep-database-recreate.1: edg-jobrep-database-recreate
## pod2man --section=1 edg-jobrep-database-recreate_txt > edg-jobrep-database-recreate.1
lcmaps-plugins-jobrep-1.5.7/utils/Makefile.in 0000644 0001750 0000144 00000042722 14574774131 016107 0000000 0000000 # Makefile.in generated by automake 1.16.5 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2021 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = utils
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/project/lcmaps.m4 \
$(top_srcdir)/project/libtool.m4 \
$(top_srcdir)/project/ltoptions.m4 \
$(top_srcdir)/project/ltsugar.m4 \
$(top_srcdir)/project/ltversion.m4 \
$(top_srcdir)/project/lt~obsolete.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(dist_sql_DATA) \
$(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/src/lcmaps_jobrep_config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(sqldir)"
SCRIPTS = $(sbin_SCRIPTS)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
DATA = $(dist_sql_DATA)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
am__DIST_COMMON = $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DISTBIN = @DISTBIN@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FILECMD = @FILECMD@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LCMAPS_BASIC_INTERFACE_CFLAGS = @LCMAPS_BASIC_INTERFACE_CFLAGS@
LCMAPS_BASIC_INTERFACE_LIBS = @LCMAPS_BASIC_INTERFACE_LIBS@
LCMAPS_CFLAGS = @LCMAPS_CFLAGS@
LCMAPS_INTERFACE_CFLAGS = @LCMAPS_INTERFACE_CFLAGS@
LCMAPS_INTERFACE_LIBS = @LCMAPS_INTERFACE_LIBS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MODULEDIR = @MODULEDIR@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SHREXT = @SHREXT@
STRIP = @STRIP@
UNIXODBC_CFLAGS = @UNIXODBC_CFLAGS@
UNIXODBC_LIBS = @UNIXODBC_LIBS@
VERSION = @VERSION@
WORKDIR = @WORKDIR@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
# Note: use datadir, not datarootdir: EL5 doesn't have it.
sqldir = $(datadir)/jobrepository/sql
dist_sql_DATA = jobrep-create-basic.sql \
jobrep-drop-total-database.sql
sbin_SCRIPTS = jobrep-admin
# See Automake manual (9.1 Executable Scripts)
EXTRA_DIST = jobrep-admin.sh.in
CLEANFILES = jobrep-admin
edit = sed \
-e 's|@bindir[@]|$(bindir)|g' \
-e 's|@pkgdatadir[@]|$(pkgdatadir)|g' \
-e 's|@sqldir[@]|$(sqldir)|g' \
-e 's|@prefix[@]|$(prefix)|g'
all: all-am
.SUFFIXES:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign utils/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign utils/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-sbinSCRIPTS: $(sbin_SCRIPTS)
@$(NORMAL_INSTALL)
@list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
$(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
done | \
sed -e 'p;s,.*/,,;n' \
-e 'h;s|.*|.|' \
-e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
{ d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
if ($$2 == $$4) { files[d] = files[d] " " $$1; \
if (++n[d] == $(am__install_max)) { \
print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
else { print "f", d "/" $$4, $$1 } } \
END { for (d in files) print "f", d, files[d] }' | \
while read type dir files; do \
if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
test -z "$$files" || { \
echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
$(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
} \
; done
uninstall-sbinSCRIPTS:
@$(NORMAL_UNINSTALL)
@list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
files=`for p in $$list; do echo "$$p"; done | \
sed -e 's,.*/,,;$(transform)'`; \
dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
install-dist_sqlDATA: $(dist_sql_DATA)
@$(NORMAL_INSTALL)
@list='$(dist_sql_DATA)'; test -n "$(sqldir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(sqldir)'"; \
$(MKDIR_P) "$(DESTDIR)$(sqldir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(sqldir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(sqldir)" || exit $$?; \
done
uninstall-dist_sqlDATA:
@$(NORMAL_UNINSTALL)
@list='$(dist_sql_DATA)'; test -n "$(sqldir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(sqldir)'; $(am__uninstall_files_from_dir)
tags TAGS:
ctags CTAGS:
cscope cscopelist:
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(SCRIPTS) $(DATA)
installdirs:
for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(sqldir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am: install-dist_sqlDATA
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am: install-sbinSCRIPTS
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man:
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-dist_sqlDATA uninstall-sbinSCRIPTS
.MAKE: install-am install-strip
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
cscopelist-am ctags-am distclean distclean-generic \
distclean-libtool distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am \
install-dist_sqlDATA install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-sbinSCRIPTS install-strip \
installcheck installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
uninstall-am uninstall-dist_sqlDATA uninstall-sbinSCRIPTS
.PRECIOUS: Makefile
jobrep-admin: jobrep-admin.sh.in Makefile
$(edit) $< >$@
chmod +x $@
# edg-jobrep-vo-to-unix \
# edg-jobrep-status-update \
# edg-jobrep-database-create \
# edg-jobrep-database-drop-all \
# edg-jobrep-database-recreate \
# edg-jobrep-drop.sql \
# edg-jobrep-database-create.1 \
# edg-jobrep-database-drop-all.1 \
# edg-jobrep-database-recreate.1
###man_MANS = edg-jobrep-status-update.1 \
### edg-jobrep-vo-to-unix.1 \
### edg-jobrep-database-create.1 \
### edg-jobrep-database-drop-all.1 \
### edg-jobrep-database-recreate.1
### %.1: %
### pod2man --section=1 $< > $<.1
#edg-jobrep-vo-to-unix.1: edg-jobrep-vo-to-unix
# pod2man --section=1 edg-jobrep-vo-to-unix > edg-jobrep-vo-to-unix.1
#
#edg-jobrep-status-update.1: edg-jobrep-status-update
# pod2man --section=1 edg-jobrep-status-update > edg-jobrep-status-update.1
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
lcmaps-plugins-jobrep-1.5.7/ltmain.sh 0000644 0001750 0000144 00001212010 14574774130 014507 0000000 0000000 #! /usr/bin/env sh
## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
## by inline-source v2019-02-19.15
# libtool (GNU libtool) 2.4.7
# Provide generalized library-building support services.
# Written by Gordon Matzigkeit , 1996
# Copyright (C) 1996-2019, 2021-2022 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# GNU Libtool is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# As a special exception to the GNU General Public License,
# if you distribute this file as part of a program or library that
# is built using GNU Libtool, you may include this file under the
# same distribution terms that you use for the rest of that program.
#
# GNU Libtool is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
PROGRAM=libtool
PACKAGE=libtool
VERSION=2.4.7
package_revision=2.4.7
## ------ ##
## Usage. ##
## ------ ##
# Run './libtool --help' for help with using this script from the
# command line.
## ------------------------------- ##
## User overridable command paths. ##
## ------------------------------- ##
# After configure completes, it has a better idea of some of the
# shell tools we need than the defaults used by the functions shared
# with bootstrap, so set those here where they can still be over-
# ridden by the user, but otherwise take precedence.
: ${AUTOCONF="autoconf"}
: ${AUTOMAKE="automake"}
## -------------------------- ##
## Source external libraries. ##
## -------------------------- ##
# Much of our low-level functionality needs to be sourced from external
# libraries, which are installed to $pkgauxdir.
# Set a version string for this script.
scriptversion=2019-02-19.15; # UTC
# General shell script boiler plate, and helper functions.
# Written by Gary V. Vaughan, 2004
# This is free software. There is NO warranty; not even for
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
#
# Copyright (C) 2004-2019, 2021 Bootstrap Authors
#
# This file is dual licensed under the terms of the MIT license
# , and GPL version 2 or later
# . You must apply one of
# these licenses when using or redistributing this software or any of
# the files within it. See the URLs above, or the file `LICENSE`
# included in the Bootstrap distribution for the full license texts.
# Please report bugs or propose patches to:
#
## ------ ##
## Usage. ##
## ------ ##
# Evaluate this file near the top of your script to gain access to
# the functions and variables defined here:
#
# . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
#
# If you need to override any of the default environment variable
# settings, do that before evaluating this file.
## -------------------- ##
## Shell normalisation. ##
## -------------------- ##
# Some shells need a little help to be as Bourne compatible as possible.
# Before doing anything else, make sure all that help has been provided!
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
fi
# NLS nuisances: We save the old values in case they are required later.
_G_user_locale=
_G_safe_locale=
for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
eval "if test set = \"\${$_G_var+set}\"; then
save_$_G_var=\$$_G_var
$_G_var=C
export $_G_var
_G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
_G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
fi"
done
# These NLS vars are set unconditionally (bootstrap issue #24). Unset those
# in case the environment reset is needed later and the $save_* variant is not
# defined (see the code above).
LC_ALL=C
LANGUAGE=C
export LANGUAGE LC_ALL
# Make sure IFS has a sensible default
sp=' '
nl='
'
IFS="$sp $nl"
# There are apparently some retarded systems that use ';' as a PATH separator!
if test "${PATH_SEPARATOR+set}" != set; then
PATH_SEPARATOR=:
(PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
(PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
PATH_SEPARATOR=';'
}
fi
# func_unset VAR
# --------------
# Portably unset VAR.
# In some shells, an 'unset VAR' statement leaves a non-zero return
# status if VAR is already unset, which might be problematic if the
# statement is used at the end of a function (thus poisoning its return
# value) or when 'set -e' is active (causing even a spurious abort of
# the script in this case).
func_unset ()
{
{ eval $1=; (eval unset $1) >/dev/null 2>&1 && eval unset $1 || : ; }
}
# Make sure CDPATH doesn't cause `cd` commands to output the target dir.
func_unset CDPATH
# Make sure ${,E,F}GREP behave sanely.
func_unset GREP_OPTIONS
## ------------------------- ##
## Locate command utilities. ##
## ------------------------- ##
# func_executable_p FILE
# ----------------------
# Check that FILE is an executable regular file.
func_executable_p ()
{
test -f "$1" && test -x "$1"
}
# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
# --------------------------------------------
# Search for either a program that responds to --version with output
# containing "GNU", or else returned by CHECK_FUNC otherwise, by
# trying all the directories in PATH with each of the elements of
# PROGS_LIST.
#
# CHECK_FUNC should accept the path to a candidate program, and
# set $func_check_prog_result if it truncates its output less than
# $_G_path_prog_max characters.
func_path_progs ()
{
_G_progs_list=$1
_G_check_func=$2
_G_PATH=${3-"$PATH"}
_G_path_prog_max=0
_G_path_prog_found=false
_G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
for _G_dir in $_G_PATH; do
IFS=$_G_save_IFS
test -z "$_G_dir" && _G_dir=.
for _G_prog_name in $_G_progs_list; do
for _exeext in '' .EXE; do
_G_path_prog=$_G_dir/$_G_prog_name$_exeext
func_executable_p "$_G_path_prog" || continue
case `"$_G_path_prog" --version 2>&1` in
*GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
*) $_G_check_func $_G_path_prog
func_path_progs_result=$func_check_prog_result
;;
esac
$_G_path_prog_found && break 3
done
done
done
IFS=$_G_save_IFS
test -z "$func_path_progs_result" && {
echo "no acceptable sed could be found in \$PATH" >&2
exit 1
}
}
# We want to be able to use the functions in this file before configure
# has figured out where the best binaries are kept, which means we have
# to search for them ourselves - except when the results are already set
# where we skip the searches.
# Unless the user overrides by setting SED, search the path for either GNU
# sed, or the sed that truncates its output the least.
test -z "$SED" && {
_G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
for _G_i in 1 2 3 4 5 6 7; do
_G_sed_script=$_G_sed_script$nl$_G_sed_script
done
echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
_G_sed_script=
func_check_prog_sed ()
{
_G_path_prog=$1
_G_count=0
printf 0123456789 >conftest.in
while :
do
cat conftest.in conftest.in >conftest.tmp
mv conftest.tmp conftest.in
cp conftest.in conftest.nl
echo '' >> conftest.nl
"$_G_path_prog" -f conftest.sed conftest.out 2>/dev/null || break
diff conftest.out conftest.nl >/dev/null 2>&1 || break
_G_count=`expr $_G_count + 1`
if test "$_G_count" -gt "$_G_path_prog_max"; then
# Best one so far, save it but keep looking for a better one
func_check_prog_result=$_G_path_prog
_G_path_prog_max=$_G_count
fi
# 10*(2^10) chars as input seems more than enough
test 10 -lt "$_G_count" && break
done
rm -f conftest.in conftest.tmp conftest.nl conftest.out
}
func_path_progs "sed gsed" func_check_prog_sed "$PATH:/usr/xpg4/bin"
rm -f conftest.sed
SED=$func_path_progs_result
}
# Unless the user overrides by setting GREP, search the path for either GNU
# grep, or the grep that truncates its output the least.
test -z "$GREP" && {
func_check_prog_grep ()
{
_G_path_prog=$1
_G_count=0
_G_path_prog_max=0
printf 0123456789 >conftest.in
while :
do
cat conftest.in conftest.in >conftest.tmp
mv conftest.tmp conftest.in
cp conftest.in conftest.nl
echo 'GREP' >> conftest.nl
"$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' conftest.out 2>/dev/null || break
diff conftest.out conftest.nl >/dev/null 2>&1 || break
_G_count=`expr $_G_count + 1`
if test "$_G_count" -gt "$_G_path_prog_max"; then
# Best one so far, save it but keep looking for a better one
func_check_prog_result=$_G_path_prog
_G_path_prog_max=$_G_count
fi
# 10*(2^10) chars as input seems more than enough
test 10 -lt "$_G_count" && break
done
rm -f conftest.in conftest.tmp conftest.nl conftest.out
}
func_path_progs "grep ggrep" func_check_prog_grep "$PATH:/usr/xpg4/bin"
GREP=$func_path_progs_result
}
## ------------------------------- ##
## User overridable command paths. ##
## ------------------------------- ##
# All uppercase variable names are used for environment variables. These
# variables can be overridden by the user before calling a script that
# uses them if a suitable command of that name is not already available
# in the command search PATH.
: ${CP="cp -f"}
: ${ECHO="printf %s\n"}
: ${EGREP="$GREP -E"}
: ${FGREP="$GREP -F"}
: ${LN_S="ln -s"}
: ${MAKE="make"}
: ${MKDIR="mkdir"}
: ${MV="mv -f"}
: ${RM="rm -f"}
: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
## -------------------- ##
## Useful sed snippets. ##
## -------------------- ##
sed_dirname='s|/[^/]*$||'
sed_basename='s|^.*/||'
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
sed_quote_subst='s|\([`"$\\]\)|\\\1|g'
# Same as above, but do not quote variable references.
sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'
# Sed substitution that turns a string into a regex matching for the
# string literally.
sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'
# Sed substitution that converts a w32 file name or path
# that contains forward slashes, into one that contains
# (escaped) backslashes. A very naive implementation.
sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
# Re-'\' parameter expansions in output of sed_double_quote_subst that
# were '\'-ed in input to the same. If an odd number of '\' preceded a
# '$' in input to sed_double_quote_subst, that '$' was protected from
# expansion. Since each input '\' is now two '\'s, look for any number
# of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'.
_G_bs='\\'
_G_bs2='\\\\'
_G_bs4='\\\\\\\\'
_G_dollar='\$'
sed_double_backslash="\
s/$_G_bs4/&\\
/g
s/^$_G_bs2$_G_dollar/$_G_bs&/
s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
s/\n//g"
# require_check_ifs_backslash
# ---------------------------
# Check if we can use backslash as IFS='\' separator, and set
# $check_ifs_backshlash_broken to ':' or 'false'.
require_check_ifs_backslash=func_require_check_ifs_backslash
func_require_check_ifs_backslash ()
{
_G_save_IFS=$IFS
IFS='\'
_G_check_ifs_backshlash='a\\b'
for _G_i in $_G_check_ifs_backshlash
do
case $_G_i in
a)
check_ifs_backshlash_broken=false
;;
'')
break
;;
*)
check_ifs_backshlash_broken=:
break
;;
esac
done
IFS=$_G_save_IFS
require_check_ifs_backslash=:
}
## ----------------- ##
## Global variables. ##
## ----------------- ##
# Except for the global variables explicitly listed below, the following
# functions in the '^func_' namespace, and the '^require_' namespace
# variables initialised in the 'Resource management' section, sourcing
# this file will not pollute your global namespace with anything
# else. There's no portable way to scope variables in Bourne shell
# though, so actually running these functions will sometimes place
# results into a variable named after the function, and often use
# temporary variables in the '^_G_' namespace. If you are careful to
# avoid using those namespaces casually in your sourcing script, things
# should continue to work as you expect. And, of course, you can freely
# overwrite any of the functions or variables defined here before
# calling anything to customize them.
EXIT_SUCCESS=0
EXIT_FAILURE=1
EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
# Allow overriding, eg assuming that you follow the convention of
# putting '$debug_cmd' at the start of all your functions, you can get
# bash to show function call trace with:
#
# debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
debug_cmd=${debug_cmd-":"}
exit_cmd=:
# By convention, finish your script with:
#
# exit $exit_status
#
# so that you can set exit_status to non-zero if you want to indicate
# something went wrong during execution without actually bailing out at
# the point of failure.
exit_status=$EXIT_SUCCESS
# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
# is ksh but when the shell is invoked as "sh" and the current value of
# the _XPG environment variable is not equal to 1 (one), the special
# positional parameter $0, within a function call, is the name of the
# function.
progpath=$0
# The name of this program.
progname=`$ECHO "$progpath" |$SED "$sed_basename"`
# Make sure we have an absolute progpath for reexecution:
case $progpath in
[\\/]*|[A-Za-z]:\\*) ;;
*[\\/]*)
progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
progdir=`cd "$progdir" && pwd`
progpath=$progdir/$progname
;;
*)
_G_IFS=$IFS
IFS=${PATH_SEPARATOR-:}
for progdir in $PATH; do
IFS=$_G_IFS
test -x "$progdir/$progname" && break
done
IFS=$_G_IFS
test -n "$progdir" || progdir=`pwd`
progpath=$progdir/$progname
;;
esac
## ----------------- ##
## Standard options. ##
## ----------------- ##
# The following options affect the operation of the functions defined
# below, and should be set appropriately depending on run-time para-
# meters passed on the command line.
opt_dry_run=false
opt_quiet=false
opt_verbose=false
# Categories 'all' and 'none' are always available. Append any others
# you will pass as the first argument to func_warning from your own
# code.
warning_categories=
# By default, display warnings according to 'opt_warning_types'. Set
# 'warning_func' to ':' to elide all warnings, or func_fatal_error to
# treat the next displayed warning as a fatal error.
warning_func=func_warn_and_continue
# Set to 'all' to display all warnings, 'none' to suppress all
# warnings, or a space delimited list of some subset of
# 'warning_categories' to display only the listed warnings.
opt_warning_types=all
## -------------------- ##
## Resource management. ##
## -------------------- ##
# This section contains definitions for functions that each ensure a
# particular resource (a file, or a non-empty configuration variable for
# example) is available, and if appropriate to extract default values
# from pertinent package files. Call them using their associated
# 'require_*' variable to ensure that they are executed, at most, once.
#
# It's entirely deliberate that calling these functions can set
# variables that don't obey the namespace limitations obeyed by the rest
# of this file, in order that that they be as useful as possible to
# callers.
# require_term_colors
# -------------------
# Allow display of bold text on terminals that support it.
require_term_colors=func_require_term_colors
func_require_term_colors ()
{
$debug_cmd
test -t 1 && {
# COLORTERM and USE_ANSI_COLORS environment variables take
# precedence, because most terminfo databases neglect to describe
# whether color sequences are supported.
test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
if test 1 = "$USE_ANSI_COLORS"; then
# Standard ANSI escape sequences
tc_reset='[0m'
tc_bold='[1m'; tc_standout='[7m'
tc_red='[31m'; tc_green='[32m'
tc_blue='[34m'; tc_cyan='[36m'
else
# Otherwise trust the terminfo database after all.
test -n "`tput sgr0 2>/dev/null`" && {
tc_reset=`tput sgr0`
test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
tc_standout=$tc_bold
test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
}
fi
}
require_term_colors=:
}
## ----------------- ##
## Function library. ##
## ----------------- ##
# This section contains a variety of useful functions to call in your
# scripts. Take note of the portable wrappers for features provided by
# some modern shells, which will fall back to slower equivalents on
# less featureful shells.
# func_append VAR VALUE
# ---------------------
# Append VALUE onto the existing contents of VAR.
# We should try to minimise forks, especially on Windows where they are
# unreasonably slow, so skip the feature probes when bash or zsh are
# being used:
if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
: ${_G_HAVE_ARITH_OP="yes"}
: ${_G_HAVE_XSI_OPS="yes"}
# The += operator was introduced in bash 3.1
case $BASH_VERSION in
[12].* | 3.0 | 3.0*) ;;
*)
: ${_G_HAVE_PLUSEQ_OP="yes"}
;;
esac
fi
# _G_HAVE_PLUSEQ_OP
# Can be empty, in which case the shell is probed, "yes" if += is
# useable or anything else if it does not work.
test -z "$_G_HAVE_PLUSEQ_OP" \
&& (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
&& _G_HAVE_PLUSEQ_OP=yes
if test yes = "$_G_HAVE_PLUSEQ_OP"
then
# This is an XSI compatible shell, allowing a faster implementation...
eval 'func_append ()
{
$debug_cmd
eval "$1+=\$2"
}'
else
# ...otherwise fall back to using expr, which is often a shell builtin.
func_append ()
{
$debug_cmd
eval "$1=\$$1\$2"
}
fi
# func_append_quoted VAR VALUE
# ----------------------------
# Quote VALUE and append to the end of shell variable VAR, separated
# by a space.
if test yes = "$_G_HAVE_PLUSEQ_OP"; then
eval 'func_append_quoted ()
{
$debug_cmd
func_quote_arg pretty "$2"
eval "$1+=\\ \$func_quote_arg_result"
}'
else
func_append_quoted ()
{
$debug_cmd
func_quote_arg pretty "$2"
eval "$1=\$$1\\ \$func_quote_arg_result"
}
fi
# func_append_uniq VAR VALUE
# --------------------------
# Append unique VALUE onto the existing contents of VAR, assuming
# entries are delimited by the first character of VALUE. For example:
#
# func_append_uniq options " --another-option option-argument"
#
# will only append to $options if " --another-option option-argument "
# is not already present somewhere in $options already (note spaces at
# each end implied by leading space in second argument).
func_append_uniq ()
{
$debug_cmd
eval _G_current_value='`$ECHO $'$1'`'
_G_delim=`expr "$2" : '\(.\)'`
case $_G_delim$_G_current_value$_G_delim in
*"$2$_G_delim"*) ;;
*) func_append "$@" ;;
esac
}
# func_arith TERM...
# ------------------
# Set func_arith_result to the result of evaluating TERMs.
test -z "$_G_HAVE_ARITH_OP" \
&& (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
&& _G_HAVE_ARITH_OP=yes
if test yes = "$_G_HAVE_ARITH_OP"; then
eval 'func_arith ()
{
$debug_cmd
func_arith_result=$(( $* ))
}'
else
func_arith ()
{
$debug_cmd
func_arith_result=`expr "$@"`
}
fi
# func_basename FILE
# ------------------
# Set func_basename_result to FILE with everything up to and including
# the last / stripped.
if test yes = "$_G_HAVE_XSI_OPS"; then
# If this shell supports suffix pattern removal, then use it to avoid
# forking. Hide the definitions single quotes in case the shell chokes
# on unsupported syntax...
_b='func_basename_result=${1##*/}'
_d='case $1 in
*/*) func_dirname_result=${1%/*}$2 ;;
* ) func_dirname_result=$3 ;;
esac'
else
# ...otherwise fall back to using sed.
_b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
_d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"`
if test "X$func_dirname_result" = "X$1"; then
func_dirname_result=$3
else
func_append func_dirname_result "$2"
fi'
fi
eval 'func_basename ()
{
$debug_cmd
'"$_b"'
}'
# func_dirname FILE APPEND NONDIR_REPLACEMENT
# -------------------------------------------
# Compute the dirname of FILE. If nonempty, add APPEND to the result,
# otherwise set result to NONDIR_REPLACEMENT.
eval 'func_dirname ()
{
$debug_cmd
'"$_d"'
}'
# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
# --------------------------------------------------------
# Perform func_basename and func_dirname in a single function
# call:
# dirname: Compute the dirname of FILE. If nonempty,
# add APPEND to the result, otherwise set result
# to NONDIR_REPLACEMENT.
# value returned in "$func_dirname_result"
# basename: Compute filename of FILE.
# value retuned in "$func_basename_result"
# For efficiency, we do not delegate to the functions above but instead
# duplicate the functionality here.
eval 'func_dirname_and_basename ()
{
$debug_cmd
'"$_b"'
'"$_d"'
}'
# func_echo ARG...
# ----------------
# Echo program name prefixed message.
func_echo ()
{
$debug_cmd
_G_message=$*
func_echo_IFS=$IFS
IFS=$nl
for _G_line in $_G_message; do
IFS=$func_echo_IFS
$ECHO "$progname: $_G_line"
done
IFS=$func_echo_IFS
}
# func_echo_all ARG...
# --------------------
# Invoke $ECHO with all args, space-separated.
func_echo_all ()
{
$ECHO "$*"
}
# func_echo_infix_1 INFIX ARG...
# ------------------------------
# Echo program name, followed by INFIX on the first line, with any
# additional lines not showing INFIX.
func_echo_infix_1 ()
{
$debug_cmd
$require_term_colors
_G_infix=$1; shift
_G_indent=$_G_infix
_G_prefix="$progname: $_G_infix: "
_G_message=$*
# Strip color escape sequences before counting printable length
for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
do
test -n "$_G_tc" && {
_G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
_G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
}
done
_G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes
func_echo_infix_1_IFS=$IFS
IFS=$nl
for _G_line in $_G_message; do
IFS=$func_echo_infix_1_IFS
$ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
_G_prefix=$_G_indent
done
IFS=$func_echo_infix_1_IFS
}
# func_error ARG...
# -----------------
# Echo program name prefixed message to standard error.
func_error ()
{
$debug_cmd
$require_term_colors
func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2
}
# func_fatal_error ARG...
# -----------------------
# Echo program name prefixed message to standard error, and exit.
func_fatal_error ()
{
$debug_cmd
func_error "$*"
exit $EXIT_FAILURE
}
# func_grep EXPRESSION FILENAME
# -----------------------------
# Check whether EXPRESSION matches any line of FILENAME, without output.
func_grep ()
{
$debug_cmd
$GREP "$1" "$2" >/dev/null 2>&1
}
# func_len STRING
# ---------------
# Set func_len_result to the length of STRING. STRING may not
# start with a hyphen.
test -z "$_G_HAVE_XSI_OPS" \
&& (eval 'x=a/b/c;
test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
&& _G_HAVE_XSI_OPS=yes
if test yes = "$_G_HAVE_XSI_OPS"; then
eval 'func_len ()
{
$debug_cmd
func_len_result=${#1}
}'
else
func_len ()
{
$debug_cmd
func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
}
fi
# func_mkdir_p DIRECTORY-PATH
# ---------------------------
# Make sure the entire path to DIRECTORY-PATH is available.
func_mkdir_p ()
{
$debug_cmd
_G_directory_path=$1
_G_dir_list=
if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
# Protect directory names starting with '-'
case $_G_directory_path in
-*) _G_directory_path=./$_G_directory_path ;;
esac
# While some portion of DIR does not yet exist...
while test ! -d "$_G_directory_path"; do
# ...make a list in topmost first order. Use a colon delimited
# list incase some portion of path contains whitespace.
_G_dir_list=$_G_directory_path:$_G_dir_list
# If the last portion added has no slash in it, the list is done
case $_G_directory_path in */*) ;; *) break ;; esac
# ...otherwise throw away the child directory and loop
_G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
done
_G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
func_mkdir_p_IFS=$IFS; IFS=:
for _G_dir in $_G_dir_list; do
IFS=$func_mkdir_p_IFS
# mkdir can fail with a 'File exist' error if two processes
# try to create one of the directories concurrently. Don't
# stop in that case!
$MKDIR "$_G_dir" 2>/dev/null || :
done
IFS=$func_mkdir_p_IFS
# Bail out if we (or some other process) failed to create a directory.
test -d "$_G_directory_path" || \
func_fatal_error "Failed to create '$1'"
fi
}
# func_mktempdir [BASENAME]
# -------------------------
# Make a temporary directory that won't clash with other running
# libtool processes, and avoids race conditions if possible. If
# given, BASENAME is the basename for that directory.
func_mktempdir ()
{
$debug_cmd
_G_template=${TMPDIR-/tmp}/${1-$progname}
if test : = "$opt_dry_run"; then
# Return a directory name, but don't create it in dry-run mode
_G_tmpdir=$_G_template-$$
else
# If mktemp works, use that first and foremost
_G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
if test ! -d "$_G_tmpdir"; then
# Failing that, at least try and use $RANDOM to avoid a race
_G_tmpdir=$_G_template-${RANDOM-0}$$
func_mktempdir_umask=`umask`
umask 0077
$MKDIR "$_G_tmpdir"
umask $func_mktempdir_umask
fi
# If we're not in dry-run mode, bomb out on failure
test -d "$_G_tmpdir" || \
func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
fi
$ECHO "$_G_tmpdir"
}
# func_normal_abspath PATH
# ------------------------
# Remove doubled-up and trailing slashes, "." path components,
# and cancel out any ".." path components in PATH after making
# it an absolute path.
func_normal_abspath ()
{
$debug_cmd
# These SED scripts presuppose an absolute path with a trailing slash.
_G_pathcar='s|^/\([^/]*\).*$|\1|'
_G_pathcdr='s|^/[^/]*||'
_G_removedotparts=':dotsl
s|/\./|/|g
t dotsl
s|/\.$|/|'
_G_collapseslashes='s|/\{1,\}|/|g'
_G_finalslash='s|/*$|/|'
# Start from root dir and reassemble the path.
func_normal_abspath_result=
func_normal_abspath_tpath=$1
func_normal_abspath_altnamespace=
case $func_normal_abspath_tpath in
"")
# Empty path, that just means $cwd.
func_stripname '' '/' "`pwd`"
func_normal_abspath_result=$func_stripname_result
return
;;
# The next three entries are used to spot a run of precisely
# two leading slashes without using negated character classes;
# we take advantage of case's first-match behaviour.
///*)
# Unusual form of absolute path, do nothing.
;;
//*)
# Not necessarily an ordinary path; POSIX reserves leading '//'
# and for example Cygwin uses it to access remote file shares
# over CIFS/SMB, so we conserve a leading double slash if found.
func_normal_abspath_altnamespace=/
;;
/*)
# Absolute path, do nothing.
;;
*)
# Relative path, prepend $cwd.
func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
;;
esac
# Cancel out all the simple stuff to save iterations. We also want
# the path to end with a slash for ease of parsing, so make sure
# there is one (and only one) here.
func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
while :; do
# Processed it all yet?
if test / = "$func_normal_abspath_tpath"; then
# If we ascended to the root using ".." the result may be empty now.
if test -z "$func_normal_abspath_result"; then
func_normal_abspath_result=/
fi
break
fi
func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
-e "$_G_pathcar"`
func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-e "$_G_pathcdr"`
# Figure out what to do with it
case $func_normal_abspath_tcomponent in
"")
# Trailing empty path component, ignore it.
;;
..)
# Parent dir; strip last assembled component from result.
func_dirname "$func_normal_abspath_result"
func_normal_abspath_result=$func_dirname_result
;;
*)
# Actual path component, append it.
func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
;;
esac
done
# Restore leading double-slash if one was found on entry.
func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
}
# func_notquiet ARG...
# --------------------
# Echo program name prefixed message only when not in quiet mode.
func_notquiet ()
{
$debug_cmd
$opt_quiet || func_echo ${1+"$@"}
# A bug in bash halts the script if the last line of a function
# fails when set -e is in force, so we need another command to
# work around that:
:
}
# func_relative_path SRCDIR DSTDIR
# --------------------------------
# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
func_relative_path ()
{
$debug_cmd
func_relative_path_result=
func_normal_abspath "$1"
func_relative_path_tlibdir=$func_normal_abspath_result
func_normal_abspath "$2"
func_relative_path_tbindir=$func_normal_abspath_result
# Ascend the tree starting from libdir
while :; do
# check if we have found a prefix of bindir
case $func_relative_path_tbindir in
$func_relative_path_tlibdir)
# found an exact match
func_relative_path_tcancelled=
break
;;
$func_relative_path_tlibdir*)
# found a matching prefix
func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
func_relative_path_tcancelled=$func_stripname_result
if test -z "$func_relative_path_result"; then
func_relative_path_result=.
fi
break
;;
*)
func_dirname $func_relative_path_tlibdir
func_relative_path_tlibdir=$func_dirname_result
if test -z "$func_relative_path_tlibdir"; then
# Have to descend all the way to the root!
func_relative_path_result=../$func_relative_path_result
func_relative_path_tcancelled=$func_relative_path_tbindir
break
fi
func_relative_path_result=../$func_relative_path_result
;;
esac
done
# Now calculate path; take care to avoid doubling-up slashes.
func_stripname '' '/' "$func_relative_path_result"
func_relative_path_result=$func_stripname_result
func_stripname '/' '/' "$func_relative_path_tcancelled"
if test -n "$func_stripname_result"; then
func_append func_relative_path_result "/$func_stripname_result"
fi
# Normalisation. If bindir is libdir, return '.' else relative path.
if test -n "$func_relative_path_result"; then
func_stripname './' '' "$func_relative_path_result"
func_relative_path_result=$func_stripname_result
fi
test -n "$func_relative_path_result" || func_relative_path_result=.
:
}
# func_quote_portable EVAL ARG
# ----------------------------
# Internal function to portably implement func_quote_arg. Note that we still
# keep attention to performance here so we as much as possible try to avoid
# calling sed binary (so far O(N) complexity as long as func_append is O(1)).
func_quote_portable ()
{
$debug_cmd
$require_check_ifs_backslash
func_quote_portable_result=$2
# one-time-loop (easy break)
while true
do
if $1; then
func_quote_portable_result=`$ECHO "$2" | $SED \
-e "$sed_double_quote_subst" -e "$sed_double_backslash"`
break
fi
# Quote for eval.
case $func_quote_portable_result in
*[\\\`\"\$]*)
# Fallback to sed for $func_check_bs_ifs_broken=:, or when the string
# contains the shell wildcard characters.
case $check_ifs_backshlash_broken$func_quote_portable_result in
:*|*[\[\*\?]*)
func_quote_portable_result=`$ECHO "$func_quote_portable_result" \
| $SED "$sed_quote_subst"`
break
;;
esac
func_quote_portable_old_IFS=$IFS
for _G_char in '\' '`' '"' '$'
do
# STATE($1) PREV($2) SEPARATOR($3)
set start "" ""
func_quote_portable_result=dummy"$_G_char$func_quote_portable_result$_G_char"dummy
IFS=$_G_char
for _G_part in $func_quote_portable_result
do
case $1 in
quote)
func_append func_quote_portable_result "$3$2"
set quote "$_G_part" "\\$_G_char"
;;
start)
set first "" ""
func_quote_portable_result=
;;
first)
set quote "$_G_part" ""
;;
esac
done
done
IFS=$func_quote_portable_old_IFS
;;
*) ;;
esac
break
done
func_quote_portable_unquoted_result=$func_quote_portable_result
case $func_quote_portable_result in
# double-quote args containing shell metacharacters to delay
# word splitting, command substitution and variable expansion
# for a subsequent eval.
# many bourne shells cannot handle close brackets correctly
# in scan sets, so we specify it separately.
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
func_quote_portable_result=\"$func_quote_portable_result\"
;;
esac
}
# func_quotefast_eval ARG
# -----------------------
# Quote one ARG (internal). This is equivalent to 'func_quote_arg eval ARG',
# but optimized for speed. Result is stored in $func_quotefast_eval.
if test xyes = `(x=; printf -v x %q yes; echo x"$x") 2>/dev/null`; then
printf -v _GL_test_printf_tilde %q '~'
if test '\~' = "$_GL_test_printf_tilde"; then
func_quotefast_eval ()
{
printf -v func_quotefast_eval_result %q "$1"
}
else
# Broken older Bash implementations. Make those faster too if possible.
func_quotefast_eval ()
{
case $1 in
'~'*)
func_quote_portable false "$1"
func_quotefast_eval_result=$func_quote_portable_result
;;
*)
printf -v func_quotefast_eval_result %q "$1"
;;
esac
}
fi
else
func_quotefast_eval ()
{
func_quote_portable false "$1"
func_quotefast_eval_result=$func_quote_portable_result
}
fi
# func_quote_arg MODEs ARG
# ------------------------
# Quote one ARG to be evaled later. MODEs argument may contain zero or more
# specifiers listed below separated by ',' character. This function returns two
# values:
# i) func_quote_arg_result
# double-quoted (when needed), suitable for a subsequent eval
# ii) func_quote_arg_unquoted_result
# has all characters that are still active within double
# quotes backslashified. Available only if 'unquoted' is specified.
#
# Available modes:
# ----------------
# 'eval' (default)
# - escape shell special characters
# 'expand'
# - the same as 'eval'; but do not quote variable references
# 'pretty'
# - request aesthetic output, i.e. '"a b"' instead of 'a\ b'. This might
# be used later in func_quote to get output like: 'echo "a b"' instead
# of 'echo a\ b'. This is slower than default on some shells.
# 'unquoted'
# - produce also $func_quote_arg_unquoted_result which does not contain
# wrapping double-quotes.
#
# Examples for 'func_quote_arg pretty,unquoted string':
#
# string | *_result | *_unquoted_result
# ------------+-----------------------+-------------------
# " | \" | \"
# a b | "a b" | a b
# "a b" | "\"a b\"" | \"a b\"
# * | "*" | *
# z="${x-$y}" | "z=\"\${x-\$y}\"" | z=\"\${x-\$y}\"
#
# Examples for 'func_quote_arg pretty,unquoted,expand string':
#
# string | *_result | *_unquoted_result
# --------------+---------------------+--------------------
# z="${x-$y}" | "z=\"${x-$y}\"" | z=\"${x-$y}\"
func_quote_arg ()
{
_G_quote_expand=false
case ,$1, in
*,expand,*)
_G_quote_expand=:
;;
esac
case ,$1, in
*,pretty,*|*,expand,*|*,unquoted,*)
func_quote_portable $_G_quote_expand "$2"
func_quote_arg_result=$func_quote_portable_result
func_quote_arg_unquoted_result=$func_quote_portable_unquoted_result
;;
*)
# Faster quote-for-eval for some shells.
func_quotefast_eval "$2"
func_quote_arg_result=$func_quotefast_eval_result
;;
esac
}
# func_quote MODEs ARGs...
# ------------------------
# Quote all ARGs to be evaled later and join them into single command. See
# func_quote_arg's description for more info.
func_quote ()
{
$debug_cmd
_G_func_quote_mode=$1 ; shift
func_quote_result=
while test 0 -lt $#; do
func_quote_arg "$_G_func_quote_mode" "$1"
if test -n "$func_quote_result"; then
func_append func_quote_result " $func_quote_arg_result"
else
func_append func_quote_result "$func_quote_arg_result"
fi
shift
done
}
# func_stripname PREFIX SUFFIX NAME
# ---------------------------------
# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
# PREFIX and SUFFIX must not contain globbing or regex special
# characters, hashes, percent signs, but SUFFIX may contain a leading
# dot (in which case that matches only a dot).
if test yes = "$_G_HAVE_XSI_OPS"; then
eval 'func_stripname ()
{
$debug_cmd
# pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
# positional parameters, so assign one to ordinary variable first.
func_stripname_result=$3
func_stripname_result=${func_stripname_result#"$1"}
func_stripname_result=${func_stripname_result%"$2"}
}'
else
func_stripname ()
{
$debug_cmd
case $2 in
.*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
esac
}
fi
# func_show_eval CMD [FAIL_EXP]
# -----------------------------
# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
# is given, then evaluate it.
func_show_eval ()
{
$debug_cmd
_G_cmd=$1
_G_fail_exp=${2-':'}
func_quote_arg pretty,expand "$_G_cmd"
eval "func_notquiet $func_quote_arg_result"
$opt_dry_run || {
eval "$_G_cmd"
_G_status=$?
if test 0 -ne "$_G_status"; then
eval "(exit $_G_status); $_G_fail_exp"
fi
}
}
# func_show_eval_locale CMD [FAIL_EXP]
# ------------------------------------
# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
# is given, then evaluate it. Use the saved locale for evaluation.
func_show_eval_locale ()
{
$debug_cmd
_G_cmd=$1
_G_fail_exp=${2-':'}
$opt_quiet || {
func_quote_arg expand,pretty "$_G_cmd"
eval "func_echo $func_quote_arg_result"
}
$opt_dry_run || {
eval "$_G_user_locale
$_G_cmd"
_G_status=$?
eval "$_G_safe_locale"
if test 0 -ne "$_G_status"; then
eval "(exit $_G_status); $_G_fail_exp"
fi
}
}
# func_tr_sh
# ----------
# Turn $1 into a string suitable for a shell variable name.
# Result is stored in $func_tr_sh_result. All characters
# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
# if $1 begins with a digit, a '_' is prepended as well.
func_tr_sh ()
{
$debug_cmd
case $1 in
[0-9]* | *[!a-zA-Z0-9_]*)
func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
;;
* )
func_tr_sh_result=$1
;;
esac
}
# func_verbose ARG...
# -------------------
# Echo program name prefixed message in verbose mode only.
func_verbose ()
{
$debug_cmd
$opt_verbose && func_echo "$*"
:
}
# func_warn_and_continue ARG...
# -----------------------------
# Echo program name prefixed warning message to standard error.
func_warn_and_continue ()
{
$debug_cmd
$require_term_colors
func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
}
# func_warning CATEGORY ARG...
# ----------------------------
# Echo program name prefixed warning message to standard error. Warning
# messages can be filtered according to CATEGORY, where this function
# elides messages where CATEGORY is not listed in the global variable
# 'opt_warning_types'.
func_warning ()
{
$debug_cmd
# CATEGORY must be in the warning_categories list!
case " $warning_categories " in
*" $1 "*) ;;
*) func_internal_error "invalid warning category '$1'" ;;
esac
_G_category=$1
shift
case " $opt_warning_types " in
*" $_G_category "*) $warning_func ${1+"$@"} ;;
esac
}
# func_sort_ver VER1 VER2
# -----------------------
# 'sort -V' is not generally available.
# Note this deviates from the version comparison in automake
# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
# but this should suffice as we won't be specifying old
# version formats or redundant trailing .0 in bootstrap.conf.
# If we did want full compatibility then we should probably
# use m4_version_compare from autoconf.
func_sort_ver ()
{
$debug_cmd
printf '%s\n%s\n' "$1" "$2" \
| sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
}
# func_lt_ver PREV CURR
# ---------------------
# Return true if PREV and CURR are in the correct order according to
# func_sort_ver, otherwise false. Use it like this:
#
# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
func_lt_ver ()
{
$debug_cmd
test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
}
# Local variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
# time-stamp-time-zone: "UTC"
# End:
#! /bin/sh
# A portable, pluggable option parser for Bourne shell.
# Written by Gary V. Vaughan, 2010
# This is free software. There is NO warranty; not even for
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
#
# Copyright (C) 2010-2019, 2021 Bootstrap Authors
#
# This file is dual licensed under the terms of the MIT license
# , and GPL version 2 or later
# . You must apply one of
# these licenses when using or redistributing this software or any of
# the files within it. See the URLs above, or the file `LICENSE`
# included in the Bootstrap distribution for the full license texts.
# Please report bugs or propose patches to:
#
# Set a version string for this script.
scriptversion=2019-02-19.15; # UTC
## ------ ##
## Usage. ##
## ------ ##
# This file is a library for parsing options in your shell scripts along
# with assorted other useful supporting features that you can make use
# of too.
#
# For the simplest scripts you might need only:
#
# #!/bin/sh
# . relative/path/to/funclib.sh
# . relative/path/to/options-parser
# scriptversion=1.0
# func_options ${1+"$@"}
# eval set dummy "$func_options_result"; shift
# ...rest of your script...
#
# In order for the '--version' option to work, you will need to have a
# suitably formatted comment like the one at the top of this file
# starting with '# Written by ' and ending with '# Copyright'.
#
# For '-h' and '--help' to work, you will also need a one line
# description of your script's purpose in a comment directly above the
# '# Written by ' line, like the one at the top of this file.
#
# The default options also support '--debug', which will turn on shell
# execution tracing (see the comment above debug_cmd below for another
# use), and '--verbose' and the func_verbose function to allow your script
# to display verbose messages only when your user has specified
# '--verbose'.
#
# After sourcing this file, you can plug in processing for additional
# options by amending the variables from the 'Configuration' section
# below, and following the instructions in the 'Option parsing'
# section further down.
## -------------- ##
## Configuration. ##
## -------------- ##
# You should override these variables in your script after sourcing this
# file so that they reflect the customisations you have added to the
# option parser.
# The usage line for option parsing errors and the start of '-h' and
# '--help' output messages. You can embed shell variables for delayed
# expansion at the time the message is displayed, but you will need to
# quote other shell meta-characters carefully to prevent them being
# expanded when the contents are evaled.
usage='$progpath [OPTION]...'
# Short help message in response to '-h' and '--help'. Add to this or
# override it after sourcing this library to reflect the full set of
# options your script accepts.
usage_message="\
--debug enable verbose shell tracing
-W, --warnings=CATEGORY
report the warnings falling in CATEGORY [all]
-v, --verbose verbosely report processing
--version print version information and exit
-h, --help print short or long help message and exit
"
# Additional text appended to 'usage_message' in response to '--help'.
long_help_message="
Warning categories include:
'all' show all warnings
'none' turn off all the warnings
'error' warnings are treated as fatal errors"
# Help message printed before fatal option parsing errors.
fatal_help="Try '\$progname --help' for more information."
## ------------------------- ##
## Hook function management. ##
## ------------------------- ##
# This section contains functions for adding, removing, and running hooks
# in the main code. A hook is just a list of function names that can be
# run in order later on.
# func_hookable FUNC_NAME
# -----------------------
# Declare that FUNC_NAME will run hooks added with
# 'func_add_hook FUNC_NAME ...'.
func_hookable ()
{
$debug_cmd
func_append hookable_fns " $1"
}
# func_add_hook FUNC_NAME HOOK_FUNC
# ---------------------------------
# Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must
# first have been declared "hookable" by a call to 'func_hookable'.
func_add_hook ()
{
$debug_cmd
case " $hookable_fns " in
*" $1 "*) ;;
*) func_fatal_error "'$1' does not accept hook functions." ;;
esac
eval func_append ${1}_hooks '" $2"'
}
# func_remove_hook FUNC_NAME HOOK_FUNC
# ------------------------------------
# Remove HOOK_FUNC from the list of hook functions to be called by
# FUNC_NAME.
func_remove_hook ()
{
$debug_cmd
eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
}
# func_propagate_result FUNC_NAME_A FUNC_NAME_B
# ---------------------------------------------
# If the *_result variable of FUNC_NAME_A _is set_, assign its value to
# *_result variable of FUNC_NAME_B.
func_propagate_result ()
{
$debug_cmd
func_propagate_result_result=:
if eval "test \"\${${1}_result+set}\" = set"
then
eval "${2}_result=\$${1}_result"
else
func_propagate_result_result=false
fi
}
# func_run_hooks FUNC_NAME [ARG]...
# ---------------------------------
# Run all hook functions registered to FUNC_NAME.
# It's assumed that the list of hook functions contains nothing more
# than a whitespace-delimited list of legal shell function names, and
# no effort is wasted trying to catch shell meta-characters or preserve
# whitespace.
func_run_hooks ()
{
$debug_cmd
case " $hookable_fns " in
*" $1 "*) ;;
*) func_fatal_error "'$1' does not support hook functions." ;;
esac
eval _G_hook_fns=\$$1_hooks; shift
for _G_hook in $_G_hook_fns; do
func_unset "${_G_hook}_result"
eval $_G_hook '${1+"$@"}'
func_propagate_result $_G_hook func_run_hooks
if $func_propagate_result_result; then
eval set dummy "$func_run_hooks_result"; shift
fi
done
}
## --------------- ##
## Option parsing. ##
## --------------- ##
# In order to add your own option parsing hooks, you must accept the
# full positional parameter list from your hook function. You may remove
# or edit any options that you action, and then pass back the remaining
# unprocessed options in '_result', escaped
# suitably for 'eval'.
#
# The '_result' variable is automatically unset
# before your hook gets called; for best performance, only set the
# *_result variable when necessary (i.e. don't call the 'func_quote'
# function unnecessarily because it can be an expensive operation on some
# machines).
#
# Like this:
#
# my_options_prep ()
# {
# $debug_cmd
#
# # Extend the existing usage message.
# usage_message=$usage_message'
# -s, --silent don'\''t print informational messages
# '
# # No change in '$@' (ignored completely by this hook). Leave
# # my_options_prep_result variable intact.
# }
# func_add_hook func_options_prep my_options_prep
#
#
# my_silent_option ()
# {
# $debug_cmd
#
# args_changed=false
#
# # Note that, for efficiency, we parse as many options as we can
# # recognise in a loop before passing the remainder back to the
# # caller on the first unrecognised argument we encounter.
# while test $# -gt 0; do
# opt=$1; shift
# case $opt in
# --silent|-s) opt_silent=:
# args_changed=:
# ;;
# # Separate non-argument short options:
# -s*) func_split_short_opt "$_G_opt"
# set dummy "$func_split_short_opt_name" \
# "-$func_split_short_opt_arg" ${1+"$@"}
# shift
# args_changed=:
# ;;
# *) # Make sure the first unrecognised option "$_G_opt"
# # is added back to "$@" in case we need it later,
# # if $args_changed was set to 'true'.
# set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
# esac
# done
#
# # Only call 'func_quote' here if we processed at least one argument.
# if $args_changed; then
# func_quote eval ${1+"$@"}
# my_silent_option_result=$func_quote_result
# fi
# }
# func_add_hook func_parse_options my_silent_option
#
#
# my_option_validation ()
# {
# $debug_cmd
#
# $opt_silent && $opt_verbose && func_fatal_help "\
# '--silent' and '--verbose' options are mutually exclusive."
# }
# func_add_hook func_validate_options my_option_validation
#
# You'll also need to manually amend $usage_message to reflect the extra
# options you parse. It's preferable to append if you can, so that
# multiple option parsing hooks can be added safely.
# func_options_finish [ARG]...
# ----------------------------
# Finishing the option parse loop (call 'func_options' hooks ATM).
func_options_finish ()
{
$debug_cmd
func_run_hooks func_options ${1+"$@"}
func_propagate_result func_run_hooks func_options_finish
}
# func_options [ARG]...
# ---------------------
# All the functions called inside func_options are hookable. See the
# individual implementations for details.
func_hookable func_options
func_options ()
{
$debug_cmd
_G_options_quoted=false
for my_func in options_prep parse_options validate_options options_finish
do
func_unset func_${my_func}_result
func_unset func_run_hooks_result
eval func_$my_func '${1+"$@"}'
func_propagate_result func_$my_func func_options
if $func_propagate_result_result; then
eval set dummy "$func_options_result"; shift
_G_options_quoted=:
fi
done
$_G_options_quoted || {
# As we (func_options) are top-level options-parser function and
# nobody quoted "$@" for us yet, we need to do it explicitly for
# caller.
func_quote eval ${1+"$@"}
func_options_result=$func_quote_result
}
}
# func_options_prep [ARG]...
# --------------------------
# All initialisations required before starting the option parse loop.
# Note that when calling hook functions, we pass through the list of
# positional parameters. If a hook function modifies that list, and
# needs to propagate that back to rest of this script, then the complete
# modified list must be put in 'func_run_hooks_result' before returning.
func_hookable func_options_prep
func_options_prep ()
{
$debug_cmd
# Option defaults:
opt_verbose=false
opt_warning_types=
func_run_hooks func_options_prep ${1+"$@"}
func_propagate_result func_run_hooks func_options_prep
}
# func_parse_options [ARG]...
# ---------------------------
# The main option parsing loop.
func_hookable func_parse_options
func_parse_options ()
{
$debug_cmd
_G_parse_options_requote=false
# this just eases exit handling
while test $# -gt 0; do
# Defer to hook functions for initial option parsing, so they
# get priority in the event of reusing an option name.
func_run_hooks func_parse_options ${1+"$@"}
func_propagate_result func_run_hooks func_parse_options
if $func_propagate_result_result; then
eval set dummy "$func_parse_options_result"; shift
# Even though we may have changed "$@", we passed the "$@" array
# down into the hook and it quoted it for us (because we are in
# this if-branch). No need to quote it again.
_G_parse_options_requote=false
fi
# Break out of the loop if we already parsed every option.
test $# -gt 0 || break
# We expect that one of the options parsed in this function matches
# and thus we remove _G_opt from "$@" and need to re-quote.
_G_match_parse_options=:
_G_opt=$1
shift
case $_G_opt in
--debug|-x) debug_cmd='set -x'
func_echo "enabling shell trace mode" >&2
$debug_cmd
;;
--no-warnings|--no-warning|--no-warn)
set dummy --warnings none ${1+"$@"}
shift
;;
--warnings|--warning|-W)
if test $# = 0 && func_missing_arg $_G_opt; then
_G_parse_options_requote=:
break
fi
case " $warning_categories $1" in
*" $1 "*)
# trailing space prevents matching last $1 above
func_append_uniq opt_warning_types " $1"
;;
*all)
opt_warning_types=$warning_categories
;;
*none)
opt_warning_types=none
warning_func=:
;;
*error)
opt_warning_types=$warning_categories
warning_func=func_fatal_error
;;
*)
func_fatal_error \
"unsupported warning category: '$1'"
;;
esac
shift
;;
--verbose|-v) opt_verbose=: ;;
--version) func_version ;;
-\?|-h) func_usage ;;
--help) func_help ;;
# Separate optargs to long options (plugins may need this):
--*=*) func_split_equals "$_G_opt"
set dummy "$func_split_equals_lhs" \
"$func_split_equals_rhs" ${1+"$@"}
shift
;;
# Separate optargs to short options:
-W*)
func_split_short_opt "$_G_opt"
set dummy "$func_split_short_opt_name" \
"$func_split_short_opt_arg" ${1+"$@"}
shift
;;
# Separate non-argument short options:
-\?*|-h*|-v*|-x*)
func_split_short_opt "$_G_opt"
set dummy "$func_split_short_opt_name" \
"-$func_split_short_opt_arg" ${1+"$@"}
shift
;;
--) _G_parse_options_requote=: ; break ;;
-*) func_fatal_help "unrecognised option: '$_G_opt'" ;;
*) set dummy "$_G_opt" ${1+"$@"}; shift
_G_match_parse_options=false
break
;;
esac
if $_G_match_parse_options; then
_G_parse_options_requote=:
fi
done
if $_G_parse_options_requote; then
# save modified positional parameters for caller
func_quote eval ${1+"$@"}
func_parse_options_result=$func_quote_result
fi
}
# func_validate_options [ARG]...
# ------------------------------
# Perform any sanity checks on option settings and/or unconsumed
# arguments.
func_hookable func_validate_options
func_validate_options ()
{
$debug_cmd
# Display all warnings if -W was not given.
test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
func_run_hooks func_validate_options ${1+"$@"}
func_propagate_result func_run_hooks func_validate_options
# Bail if the options were screwed!
$exit_cmd $EXIT_FAILURE
}
## ----------------- ##
## Helper functions. ##
## ----------------- ##
# This section contains the helper functions used by the rest of the
# hookable option parser framework in ascii-betical order.
# func_fatal_help ARG...
# ----------------------
# Echo program name prefixed message to standard error, followed by
# a help hint, and exit.
func_fatal_help ()
{
$debug_cmd
eval \$ECHO \""Usage: $usage"\"
eval \$ECHO \""$fatal_help"\"
func_error ${1+"$@"}
exit $EXIT_FAILURE
}
# func_help
# ---------
# Echo long help message to standard output and exit.
func_help ()
{
$debug_cmd
func_usage_message
$ECHO "$long_help_message"
exit 0
}
# func_missing_arg ARGNAME
# ------------------------
# Echo program name prefixed message to standard error and set global
# exit_cmd.
func_missing_arg ()
{
$debug_cmd
func_error "Missing argument for '$1'."
exit_cmd=exit
}
# func_split_equals STRING
# ------------------------
# Set func_split_equals_lhs and func_split_equals_rhs shell variables
# after splitting STRING at the '=' sign.
test -z "$_G_HAVE_XSI_OPS" \
&& (eval 'x=a/b/c;
test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
&& _G_HAVE_XSI_OPS=yes
if test yes = "$_G_HAVE_XSI_OPS"
then
# This is an XSI compatible shell, allowing a faster implementation...
eval 'func_split_equals ()
{
$debug_cmd
func_split_equals_lhs=${1%%=*}
func_split_equals_rhs=${1#*=}
if test "x$func_split_equals_lhs" = "x$1"; then
func_split_equals_rhs=
fi
}'
else
# ...otherwise fall back to using expr, which is often a shell builtin.
func_split_equals ()
{
$debug_cmd
func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
func_split_equals_rhs=
test "x$func_split_equals_lhs=" = "x$1" \
|| func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
}
fi #func_split_equals
# func_split_short_opt SHORTOPT
# -----------------------------
# Set func_split_short_opt_name and func_split_short_opt_arg shell
# variables after splitting SHORTOPT after the 2nd character.
if test yes = "$_G_HAVE_XSI_OPS"
then
# This is an XSI compatible shell, allowing a faster implementation...
eval 'func_split_short_opt ()
{
$debug_cmd
func_split_short_opt_arg=${1#??}
func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
}'
else
# ...otherwise fall back to using expr, which is often a shell builtin.
func_split_short_opt ()
{
$debug_cmd
func_split_short_opt_name=`expr "x$1" : 'x\(-.\)'`
func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
}
fi #func_split_short_opt
# func_usage
# ----------
# Echo short help message to standard output and exit.
func_usage ()
{
$debug_cmd
func_usage_message
$ECHO "Run '$progname --help |${PAGER-more}' for full usage"
exit 0
}
# func_usage_message
# ------------------
# Echo short help message to standard output.
func_usage_message ()
{
$debug_cmd
eval \$ECHO \""Usage: $usage"\"
echo
$SED -n 's|^# ||
/^Written by/{
x;p;x
}
h
/^Written by/q' < "$progpath"
echo
eval \$ECHO \""$usage_message"\"
}
# func_version
# ------------
# Echo version message to standard output and exit.
# The version message is extracted from the calling file's header
# comments, with leading '# ' stripped:
# 1. First display the progname and version
# 2. Followed by the header comment line matching /^# Written by /
# 3. Then a blank line followed by the first following line matching
# /^# Copyright /
# 4. Immediately followed by any lines between the previous matches,
# except lines preceding the intervening completely blank line.
# For example, see the header comments of this file.
func_version ()
{
$debug_cmd
printf '%s\n' "$progname $scriptversion"
$SED -n '
/^# Written by /!b
s|^# ||; p; n
:fwd2blnk
/./ {
n
b fwd2blnk
}
p; n
:holdwrnt
s|^# ||
s|^# *$||
/^Copyright /!{
/./H
n
b holdwrnt
}
s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
G
s|\(\n\)\n*|\1|g
p; q' < "$progpath"
exit $?
}
# Local variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-pattern: "30/scriptversion=%:y-%02m-%02d.%02H; # UTC"
# time-stamp-time-zone: "UTC"
# End:
# Set a version string.
scriptversion='(GNU libtool) 2.4.7'
# func_echo ARG...
# ----------------
# Libtool also displays the current mode in messages, so override
# funclib.sh func_echo with this custom definition.
func_echo ()
{
$debug_cmd
_G_message=$*
func_echo_IFS=$IFS
IFS=$nl
for _G_line in $_G_message; do
IFS=$func_echo_IFS
$ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
done
IFS=$func_echo_IFS
}
# func_warning ARG...
# -------------------
# Libtool warnings are not categorized, so override funclib.sh
# func_warning with this simpler definition.
func_warning ()
{
$debug_cmd
$warning_func ${1+"$@"}
}
## ---------------- ##
## Options parsing. ##
## ---------------- ##
# Hook in the functions to make sure our own options are parsed during
# the option parsing loop.
usage='$progpath [OPTION]... [MODE-ARG]...'
# Short help message in response to '-h'.
usage_message="Options:
--config show all configuration variables
--debug enable verbose shell tracing
-n, --dry-run display commands without modifying any files
--features display basic configuration information and exit
--mode=MODE use operation mode MODE
--no-warnings equivalent to '-Wnone'
--preserve-dup-deps don't remove duplicate dependency libraries
--quiet, --silent don't print informational messages
--tag=TAG use configuration variables from tag TAG
-v, --verbose print more informational messages than default
--version print version information
-W, --warnings=CATEGORY report the warnings falling in CATEGORY [all]
-h, --help, --help-all print short, long, or detailed help message
"
# Additional text appended to 'usage_message' in response to '--help'.
func_help ()
{
$debug_cmd
func_usage_message
$ECHO "$long_help_message
MODE must be one of the following:
clean remove files from the build directory
compile compile a source file into a libtool object
execute automatically set library path, then run a program
finish complete the installation of libtool libraries
install install libraries or executables
link create a library or an executable
uninstall remove libraries from an installed directory
MODE-ARGS vary depending on the MODE. When passed as first option,
'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
Try '$progname --help --mode=MODE' for a more detailed description of MODE.
When reporting a bug, please describe a test case to reproduce it and
include the following information:
host-triplet: $host
shell: $SHELL
compiler: $LTCC
compiler flags: $LTCFLAGS
linker: $LD (gnu? $with_gnu_ld)
version: $progname (GNU libtool) 2.4.7
automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q`
Report bugs to .
GNU libtool home page: .
General help using GNU software: ."
exit 0
}
# func_lo2o OBJECT-NAME
# ---------------------
# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
# object suffix.
lo2o=s/\\.lo\$/.$objext/
o2lo=s/\\.$objext\$/.lo/
if test yes = "$_G_HAVE_XSI_OPS"; then
eval 'func_lo2o ()
{
case $1 in
*.lo) func_lo2o_result=${1%.lo}.$objext ;;
* ) func_lo2o_result=$1 ;;
esac
}'
# func_xform LIBOBJ-OR-SOURCE
# ---------------------------
# Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
# suffix to a '.lo' libtool-object suffix.
eval 'func_xform ()
{
func_xform_result=${1%.*}.lo
}'
else
# ...otherwise fall back to using sed.
func_lo2o ()
{
func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
}
func_xform ()
{
func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
}
fi
# func_fatal_configuration ARG...
# -------------------------------
# Echo program name prefixed message to standard error, followed by
# a configuration failure hint, and exit.
func_fatal_configuration ()
{
func_fatal_error ${1+"$@"} \
"See the $PACKAGE documentation for more information." \
"Fatal configuration error."
}
# func_config
# -----------
# Display the configuration for all the tags in this script.
func_config ()
{
re_begincf='^# ### BEGIN LIBTOOL'
re_endcf='^# ### END LIBTOOL'
# Default configuration.
$SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
# Now print the configurations for the tags.
for tagname in $taglist; do
$SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
done
exit $?
}
# func_features
# -------------
# Display the features supported by this script.
func_features ()
{
echo "host: $host"
if test yes = "$build_libtool_libs"; then
echo "enable shared libraries"
else
echo "disable shared libraries"
fi
if test yes = "$build_old_libs"; then
echo "enable static libraries"
else
echo "disable static libraries"
fi
exit $?
}
# func_enable_tag TAGNAME
# -----------------------
# Verify that TAGNAME is valid, and either flag an error and exit, or
# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
# variable here.
func_enable_tag ()
{
# Global variable:
tagname=$1
re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
sed_extractcf=/$re_begincf/,/$re_endcf/p
# Validate tagname.
case $tagname in
*[!-_A-Za-z0-9,/]*)
func_fatal_error "invalid tag name: $tagname"
;;
esac
# Don't test for the "default" C tag, as we know it's
# there but not specially marked.
case $tagname in
CC) ;;
*)
if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
taglist="$taglist $tagname"
# Evaluate the configuration. Be careful to quote the path
# and the sed script, to avoid splitting on whitespace, but
# also don't use non-portable quotes within backquotes within
# quotes we have to do it in 2 steps:
extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
eval "$extractedcf"
else
func_error "ignoring unknown tag $tagname"
fi
;;
esac
}
# func_check_version_match
# ------------------------
# Ensure that we are using m4 macros, and libtool script from the same
# release of libtool.
func_check_version_match ()
{
if test "$package_revision" != "$macro_revision"; then
if test "$VERSION" != "$macro_version"; then
if test -z "$macro_version"; then
cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from an older release.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
else
cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
fi
else
cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
$progname: but the definition of this LT_INIT comes from revision $macro_revision.
$progname: You should recreate aclocal.m4 with macros from revision $package_revision
$progname: of $PACKAGE $VERSION and run autoconf again.
_LT_EOF
fi
exit $EXIT_MISMATCH
fi
}
# libtool_options_prep [ARG]...
# -----------------------------
# Preparation for options parsed by libtool.
libtool_options_prep ()
{
$debug_mode
# Option defaults:
opt_config=false
opt_dlopen=
opt_dry_run=false
opt_help=false
opt_mode=
opt_preserve_dup_deps=false
opt_quiet=false
nonopt=
preserve_args=
_G_rc_lt_options_prep=:
# Shorthand for --mode=foo, only valid as the first argument
case $1 in
clean|clea|cle|cl)
shift; set dummy --mode clean ${1+"$@"}; shift
;;
compile|compil|compi|comp|com|co|c)
shift; set dummy --mode compile ${1+"$@"}; shift
;;
execute|execut|execu|exec|exe|ex|e)
shift; set dummy --mode execute ${1+"$@"}; shift
;;
finish|finis|fini|fin|fi|f)
shift; set dummy --mode finish ${1+"$@"}; shift
;;
install|instal|insta|inst|ins|in|i)
shift; set dummy --mode install ${1+"$@"}; shift
;;
link|lin|li|l)
shift; set dummy --mode link ${1+"$@"}; shift
;;
uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
shift; set dummy --mode uninstall ${1+"$@"}; shift
;;
*)
_G_rc_lt_options_prep=false
;;
esac
if $_G_rc_lt_options_prep; then
# Pass back the list of options.
func_quote eval ${1+"$@"}
libtool_options_prep_result=$func_quote_result
fi
}
func_add_hook func_options_prep libtool_options_prep
# libtool_parse_options [ARG]...
# ---------------------------------
# Provide handling for libtool specific options.
libtool_parse_options ()
{
$debug_cmd
_G_rc_lt_parse_options=false
# Perform our own loop to consume as many options as possible in
# each iteration.
while test $# -gt 0; do
_G_match_lt_parse_options=:
_G_opt=$1
shift
case $_G_opt in
--dry-run|--dryrun|-n)
opt_dry_run=:
;;
--config) func_config ;;
--dlopen|-dlopen)
opt_dlopen="${opt_dlopen+$opt_dlopen
}$1"
shift
;;
--preserve-dup-deps)
opt_preserve_dup_deps=: ;;
--features) func_features ;;
--finish) set dummy --mode finish ${1+"$@"}; shift ;;
--help) opt_help=: ;;
--help-all) opt_help=': help-all' ;;
--mode) test $# = 0 && func_missing_arg $_G_opt && break
opt_mode=$1
case $1 in
# Valid mode arguments:
clean|compile|execute|finish|install|link|relink|uninstall) ;;
# Catch anything else as an error
*) func_error "invalid argument for $_G_opt"
exit_cmd=exit
break
;;
esac
shift
;;
--no-silent|--no-quiet)
opt_quiet=false
func_append preserve_args " $_G_opt"
;;
--no-warnings|--no-warning|--no-warn)
opt_warning=false
func_append preserve_args " $_G_opt"
;;
--no-verbose)
opt_verbose=false
func_append preserve_args " $_G_opt"
;;
--silent|--quiet)
opt_quiet=:
opt_verbose=false
func_append preserve_args " $_G_opt"
;;
--tag) test $# = 0 && func_missing_arg $_G_opt && break
opt_tag=$1
func_append preserve_args " $_G_opt $1"
func_enable_tag "$1"
shift
;;
--verbose|-v) opt_quiet=false
opt_verbose=:
func_append preserve_args " $_G_opt"
;;
# An option not handled by this hook function:
*) set dummy "$_G_opt" ${1+"$@"} ; shift
_G_match_lt_parse_options=false
break
;;
esac
$_G_match_lt_parse_options && _G_rc_lt_parse_options=:
done
if $_G_rc_lt_parse_options; then
# save modified positional parameters for caller
func_quote eval ${1+"$@"}
libtool_parse_options_result=$func_quote_result
fi
}
func_add_hook func_parse_options libtool_parse_options
# libtool_validate_options [ARG]...
# ---------------------------------
# Perform any sanity checks on option settings and/or unconsumed
# arguments.
libtool_validate_options ()
{
# save first non-option argument
if test 0 -lt $#; then
nonopt=$1
shift
fi
# preserve --debug
test : = "$debug_cmd" || func_append preserve_args " --debug"
# Keeping compiler generated duplicates in $postdeps and $predeps is not
# harmful, and is necessary in a majority of systems that use it to satisfy
# symbol dependencies.
opt_duplicate_compiler_generated_deps=:
$opt_help || {
# Sanity checks first:
func_check_version_match
test yes != "$build_libtool_libs" \
&& test yes != "$build_old_libs" \
&& func_fatal_configuration "not configured to build any kind of library"
# Darwin sucks
eval std_shrext=\"$shrext_cmds\"
# Only execute mode is allowed to have -dlopen flags.
if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
func_error "unrecognized option '-dlopen'"
$ECHO "$help" 1>&2
exit $EXIT_FAILURE
fi
# Change the help message to a mode-specific one.
generic_help=$help
help="Try '$progname --help --mode=$opt_mode' for more information."
}
# Pass back the unparsed argument list
func_quote eval ${1+"$@"}
libtool_validate_options_result=$func_quote_result
}
func_add_hook func_validate_options libtool_validate_options
# Process options as early as possible so that --help and --version
# can return quickly.
func_options ${1+"$@"}
eval set dummy "$func_options_result"; shift
## ----------- ##
## Main. ##
## ----------- ##
magic='%%%MAGIC variable%%%'
magic_exe='%%%MAGIC EXE variable%%%'
# Global variables.
extracted_archives=
extracted_serial=0
# If this variable is set in any of the actions, the command in it
# will be execed at the end. This prevents here-documents from being
# left over by shells.
exec_cmd=
# A function that is used when there is no print builtin or printf.
func_fallback_echo ()
{
eval 'cat <<_LTECHO_EOF
$1
_LTECHO_EOF'
}
# func_generated_by_libtool
# True iff stdin has been generated by Libtool. This function is only
# a basic sanity check; it will hardly flush out determined imposters.
func_generated_by_libtool_p ()
{
$GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
}
# func_lalib_p file
# True iff FILE is a libtool '.la' library or '.lo' object file.
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_lalib_p ()
{
test -f "$1" &&
$SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
}
# func_lalib_unsafe_p file
# True iff FILE is a libtool '.la' library or '.lo' object file.
# This function implements the same check as func_lalib_p without
# resorting to external programs. To this end, it redirects stdin and
# closes it afterwards, without saving the original file descriptor.
# As a safety measure, use it only where a negative result would be
# fatal anyway. Works if 'file' does not exist.
func_lalib_unsafe_p ()
{
lalib_p=no
if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
for lalib_p_l in 1 2 3 4
do
read lalib_p_line
case $lalib_p_line in
\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
esac
done
exec 0<&5 5<&-
fi
test yes = "$lalib_p"
}
# func_ltwrapper_script_p file
# True iff FILE is a libtool wrapper script
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_script_p ()
{
test -f "$1" &&
$lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
}
# func_ltwrapper_executable_p file
# True iff FILE is a libtool wrapper executable
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_executable_p ()
{
func_ltwrapper_exec_suffix=
case $1 in
*.exe) ;;
*) func_ltwrapper_exec_suffix=.exe ;;
esac
$GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
}
# func_ltwrapper_scriptname file
# Assumes file is an ltwrapper_executable
# uses $file to determine the appropriate filename for a
# temporary ltwrapper_script.
func_ltwrapper_scriptname ()
{
func_dirname_and_basename "$1" "" "."
func_stripname '' '.exe' "$func_basename_result"
func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
}
# func_ltwrapper_p file
# True iff FILE is a libtool wrapper script or wrapper executable
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_p ()
{
func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
}
# func_execute_cmds commands fail_cmd
# Execute tilde-delimited COMMANDS.
# If FAIL_CMD is given, eval that upon failure.
# FAIL_CMD may read-access the current command in variable CMD!
func_execute_cmds ()
{
$debug_cmd
save_ifs=$IFS; IFS='~'
for cmd in $1; do
IFS=$sp$nl
eval cmd=\"$cmd\"
IFS=$save_ifs
func_show_eval "$cmd" "${2-:}"
done
IFS=$save_ifs
}
# func_source file
# Source FILE, adding directory component if necessary.
# Note that it is not necessary on cygwin/mingw to append a dot to
# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
# behavior happens only for exec(3), not for open(2)! Also, sourcing
# 'FILE.' does not work on cygwin managed mounts.
func_source ()
{
$debug_cmd
case $1 in
*/* | *\\*) . "$1" ;;
*) . "./$1" ;;
esac
}
# func_resolve_sysroot PATH
# Replace a leading = in PATH with a sysroot. Store the result into
# func_resolve_sysroot_result
func_resolve_sysroot ()
{
func_resolve_sysroot_result=$1
case $func_resolve_sysroot_result in
=*)
func_stripname '=' '' "$func_resolve_sysroot_result"
func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
;;
esac
}
# func_replace_sysroot PATH
# If PATH begins with the sysroot, replace it with = and
# store the result into func_replace_sysroot_result.
func_replace_sysroot ()
{
case $lt_sysroot:$1 in
?*:"$lt_sysroot"*)
func_stripname "$lt_sysroot" '' "$1"
func_replace_sysroot_result='='$func_stripname_result
;;
*)
# Including no sysroot.
func_replace_sysroot_result=$1
;;
esac
}
# func_infer_tag arg
# Infer tagged configuration to use if any are available and
# if one wasn't chosen via the "--tag" command line option.
# Only attempt this if the compiler in the base compile
# command doesn't match the default compiler.
# arg is usually of the form 'gcc ...'
func_infer_tag ()
{
$debug_cmd
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
func_append_quoted CC_quoted "$arg"
done
CC_expanded=`func_echo_all $CC`
CC_quoted_expanded=`func_echo_all $CC_quoted`
case $@ in
# Blanks in the command may have been stripped by the calling shell,
# but not from the CC environment variable when configure was run.
" $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
" $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
# Blanks at the start of $base_compile will cause this to fail
# if we don't check for them as well.
*)
for z in $available_tags; do
if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
# Evaluate the configuration.
eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
CC_quoted=
for arg in $CC; do
# Double-quote args containing other shell metacharacters.
func_append_quoted CC_quoted "$arg"
done
CC_expanded=`func_echo_all $CC`
CC_quoted_expanded=`func_echo_all $CC_quoted`
case "$@ " in
" $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
" $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
# The compiler in the base compile command matches
# the one in the tagged configuration.
# Assume this is the tagged configuration we want.
tagname=$z
break
;;
esac
fi
done
# If $tagname still isn't set, then no tagged configuration
# was found and let the user know that the "--tag" command
# line option must be used.
if test -z "$tagname"; then
func_echo "unable to infer tagged configuration"
func_fatal_error "specify a tag with '--tag'"
# else
# func_verbose "using $tagname tagged configuration"
fi
;;
esac
fi
}
# func_write_libtool_object output_name pic_name nonpic_name
# Create a libtool object file (analogous to a ".la" file),
# but don't create it if we're doing a dry run.
func_write_libtool_object ()
{
write_libobj=$1
if test yes = "$build_libtool_libs"; then
write_lobj=\'$2\'
else
write_lobj=none
fi
if test yes = "$build_old_libs"; then
write_oldobj=\'$3\'
else
write_oldobj=none
fi
$opt_dry_run || {
cat >${write_libobj}T </dev/null`
if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
$SED -e "$sed_naive_backslashify"`
else
func_convert_core_file_wine_to_w32_result=
fi
fi
}
# end: func_convert_core_file_wine_to_w32
# func_convert_core_path_wine_to_w32 ARG
# Helper function used by path conversion functions when $build is *nix, and
# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
# configured wine environment available, with the winepath program in $build's
# $PATH. Assumes ARG has no leading or trailing path separator characters.
#
# ARG is path to be converted from $build format to win32.
# Result is available in $func_convert_core_path_wine_to_w32_result.
# Unconvertible file (directory) names in ARG are skipped; if no directory names
# are convertible, then the result may be empty.
func_convert_core_path_wine_to_w32 ()
{
$debug_cmd
# unfortunately, winepath doesn't convert paths, only file names
func_convert_core_path_wine_to_w32_result=
if test -n "$1"; then
oldIFS=$IFS
IFS=:
for func_convert_core_path_wine_to_w32_f in $1; do
IFS=$oldIFS
func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
if test -n "$func_convert_core_file_wine_to_w32_result"; then
if test -z "$func_convert_core_path_wine_to_w32_result"; then
func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
else
func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
fi
fi
done
IFS=$oldIFS
fi
}
# end: func_convert_core_path_wine_to_w32
# func_cygpath ARGS...
# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
# (2), returns the Cygwin file name or path in func_cygpath_result (input
# file name or path is assumed to be in w32 format, as previously converted
# from $build's *nix or MSYS format). In case (3), returns the w32 file name
# or path in func_cygpath_result (input file name or path is assumed to be in
# Cygwin format). Returns an empty string on error.
#
# ARGS are passed to cygpath, with the last one being the file name or path to
# be converted.
#
# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
# environment variable; do not put it in $PATH.
func_cygpath ()
{
$debug_cmd
if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
if test "$?" -ne 0; then
# on failure, ensure result is empty
func_cygpath_result=
fi
else
func_cygpath_result=
func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
fi
}
#end: func_cygpath
# func_convert_core_msys_to_w32 ARG
# Convert file name or path ARG from MSYS format to w32 format. Return
# result in func_convert_core_msys_to_w32_result.
func_convert_core_msys_to_w32 ()
{
$debug_cmd
# awkward: cmd appends spaces to result
func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
$SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
}
#end: func_convert_core_msys_to_w32
# func_convert_file_check ARG1 ARG2
# Verify that ARG1 (a file name in $build format) was converted to $host
# format in ARG2. Otherwise, emit an error message, but continue (resetting
# func_to_host_file_result to ARG1).
func_convert_file_check ()
{
$debug_cmd
if test -z "$2" && test -n "$1"; then
func_error "Could not determine host file name corresponding to"
func_error " '$1'"
func_error "Continuing, but uninstalled executables may not work."
# Fallback:
func_to_host_file_result=$1
fi
}
# end func_convert_file_check
# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
# Verify that FROM_PATH (a path in $build format) was converted to $host
# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
# func_to_host_file_result to a simplistic fallback value (see below).
func_convert_path_check ()
{
$debug_cmd
if test -z "$4" && test -n "$3"; then
func_error "Could not determine the host path corresponding to"
func_error " '$3'"
func_error "Continuing, but uninstalled executables may not work."
# Fallback. This is a deliberately simplistic "conversion" and
# should not be "improved". See libtool.info.
if test "x$1" != "x$2"; then
lt_replace_pathsep_chars="s|$1|$2|g"
func_to_host_path_result=`echo "$3" |
$SED -e "$lt_replace_pathsep_chars"`
else
func_to_host_path_result=$3
fi
fi
}
# end func_convert_path_check
# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
# and appending REPL if ORIG matches BACKPAT.
func_convert_path_front_back_pathsep ()
{
$debug_cmd
case $4 in
$1 ) func_to_host_path_result=$3$func_to_host_path_result
;;
esac
case $4 in
$2 ) func_append func_to_host_path_result "$3"
;;
esac
}
# end func_convert_path_front_back_pathsep
##################################################
# $build to $host FILE NAME CONVERSION FUNCTIONS #
##################################################
# invoked via '$to_host_file_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# Result will be available in $func_to_host_file_result.
# func_to_host_file ARG
# Converts the file name ARG from $build format to $host format. Return result
# in func_to_host_file_result.
func_to_host_file ()
{
$debug_cmd
$to_host_file_cmd "$1"
}
# end func_to_host_file
# func_to_tool_file ARG LAZY
# converts the file name ARG from $build format to toolchain format. Return
# result in func_to_tool_file_result. If the conversion in use is listed
# in (the comma separated) LAZY, no conversion takes place.
func_to_tool_file ()
{
$debug_cmd
case ,$2, in
*,"$to_tool_file_cmd",*)
func_to_tool_file_result=$1
;;
*)
$to_tool_file_cmd "$1"
func_to_tool_file_result=$func_to_host_file_result
;;
esac
}
# end func_to_tool_file
# func_convert_file_noop ARG
# Copy ARG to func_to_host_file_result.
func_convert_file_noop ()
{
func_to_host_file_result=$1
}
# end func_convert_file_noop
# func_convert_file_msys_to_w32 ARG
# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
# conversion to w32 is not available inside the cwrapper. Returns result in
# func_to_host_file_result.
func_convert_file_msys_to_w32 ()
{
$debug_cmd
func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_msys_to_w32 "$1"
func_to_host_file_result=$func_convert_core_msys_to_w32_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_msys_to_w32
# func_convert_file_cygwin_to_w32 ARG
# Convert file name ARG from Cygwin to w32 format. Returns result in
# func_to_host_file_result.
func_convert_file_cygwin_to_w32 ()
{
$debug_cmd
func_to_host_file_result=$1
if test -n "$1"; then
# because $build is cygwin, we call "the" cygpath in $PATH; no need to use
# LT_CYGPATH in this case.
func_to_host_file_result=`cygpath -m "$1"`
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_cygwin_to_w32
# func_convert_file_nix_to_w32 ARG
# Convert file name ARG from *nix to w32 format. Requires a wine environment
# and a working winepath. Returns result in func_to_host_file_result.
func_convert_file_nix_to_w32 ()
{
$debug_cmd
func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_file_wine_to_w32 "$1"
func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_nix_to_w32
# func_convert_file_msys_to_cygwin ARG
# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
# Returns result in func_to_host_file_result.
func_convert_file_msys_to_cygwin ()
{
$debug_cmd
func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_msys_to_w32 "$1"
func_cygpath -u "$func_convert_core_msys_to_w32_result"
func_to_host_file_result=$func_cygpath_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_msys_to_cygwin
# func_convert_file_nix_to_cygwin ARG
# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
# in func_to_host_file_result.
func_convert_file_nix_to_cygwin ()
{
$debug_cmd
func_to_host_file_result=$1
if test -n "$1"; then
# convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
func_convert_core_file_wine_to_w32 "$1"
func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
func_to_host_file_result=$func_cygpath_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_nix_to_cygwin
#############################################
# $build to $host PATH CONVERSION FUNCTIONS #
#############################################
# invoked via '$to_host_path_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# The result will be available in $func_to_host_path_result.
#
# Path separators are also converted from $build format to $host format. If
# ARG begins or ends with a path separator character, it is preserved (but
# converted to $host format) on output.
#
# All path conversion functions are named using the following convention:
# file name conversion function : func_convert_file_X_to_Y ()
# path conversion function : func_convert_path_X_to_Y ()
# where, for any given $build/$host combination the 'X_to_Y' value is the
# same. If conversion functions are added for new $build/$host combinations,
# the two new functions must follow this pattern, or func_init_to_host_path_cmd
# will break.
# func_init_to_host_path_cmd
# Ensures that function "pointer" variable $to_host_path_cmd is set to the
# appropriate value, based on the value of $to_host_file_cmd.
to_host_path_cmd=
func_init_to_host_path_cmd ()
{
$debug_cmd
if test -z "$to_host_path_cmd"; then
func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
to_host_path_cmd=func_convert_path_$func_stripname_result
fi
}
# func_to_host_path ARG
# Converts the path ARG from $build format to $host format. Return result
# in func_to_host_path_result.
func_to_host_path ()
{
$debug_cmd
func_init_to_host_path_cmd
$to_host_path_cmd "$1"
}
# end func_to_host_path
# func_convert_path_noop ARG
# Copy ARG to func_to_host_path_result.
func_convert_path_noop ()
{
func_to_host_path_result=$1
}
# end func_convert_path_noop
# func_convert_path_msys_to_w32 ARG
# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
# conversion to w32 is not available inside the cwrapper. Returns result in
# func_to_host_path_result.
func_convert_path_msys_to_w32 ()
{
$debug_cmd
func_to_host_path_result=$1
if test -n "$1"; then
# Remove leading and trailing path separator characters from ARG. MSYS
# behavior is inconsistent here; cygpath turns them into '.;' and ';.';
# and winepath ignores them completely.
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
func_to_host_path_result=$func_convert_core_msys_to_w32_result
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
fi
}
# end func_convert_path_msys_to_w32
# func_convert_path_cygwin_to_w32 ARG
# Convert path ARG from Cygwin to w32 format. Returns result in
# func_to_host_file_result.
func_convert_path_cygwin_to_w32 ()
{
$debug_cmd
func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
fi
}
# end func_convert_path_cygwin_to_w32
# func_convert_path_nix_to_w32 ARG
# Convert path ARG from *nix to w32 format. Requires a wine environment and
# a working winepath. Returns result in func_to_host_file_result.
func_convert_path_nix_to_w32 ()
{
$debug_cmd
func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
fi
}
# end func_convert_path_nix_to_w32
# func_convert_path_msys_to_cygwin ARG
# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
# Returns result in func_to_host_file_result.
func_convert_path_msys_to_cygwin ()
{
$debug_cmd
func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
func_to_host_path_result=$func_cygpath_result
func_convert_path_check : : \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" : "$1"
fi
}
# end func_convert_path_msys_to_cygwin
# func_convert_path_nix_to_cygwin ARG
# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
# func_to_host_file_result.
func_convert_path_nix_to_cygwin ()
{
$debug_cmd
func_to_host_path_result=$1
if test -n "$1"; then
# Remove leading and trailing path separator characters from
# ARG. msys behavior is inconsistent here, cygpath turns them
# into '.;' and ';.', and winepath ignores them completely.
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
func_to_host_path_result=$func_cygpath_result
func_convert_path_check : : \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" : "$1"
fi
}
# end func_convert_path_nix_to_cygwin
# func_dll_def_p FILE
# True iff FILE is a Windows DLL '.def' file.
# Keep in sync with _LT_DLL_DEF_P in libtool.m4
func_dll_def_p ()
{
$debug_cmd
func_dll_def_p_tmp=`$SED -n \
-e 's/^[ ]*//' \
-e '/^\(;.*\)*$/d' \
-e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \
-e q \
"$1"`
test DEF = "$func_dll_def_p_tmp"
}
# func_mode_compile arg...
func_mode_compile ()
{
$debug_cmd
# Get the compilation command and the source file.
base_compile=
srcfile=$nonopt # always keep a non-empty value in "srcfile"
suppress_opt=yes
suppress_output=
arg_mode=normal
libobj=
later=
pie_flag=
for arg
do
case $arg_mode in
arg )
# do not "continue". Instead, add this to base_compile
lastarg=$arg
arg_mode=normal
;;
target )
libobj=$arg
arg_mode=normal
continue
;;
normal )
# Accept any command-line options.
case $arg in
-o)
test -n "$libobj" && \
func_fatal_error "you cannot specify '-o' more than once"
arg_mode=target
continue
;;
-pie | -fpie | -fPIE)
func_append pie_flag " $arg"
continue
;;
-shared | -static | -prefer-pic | -prefer-non-pic)
func_append later " $arg"
continue
;;
-no-suppress)
suppress_opt=no
continue
;;
-Xcompiler)
arg_mode=arg # the next one goes into the "base_compile" arg list
continue # The current "srcfile" will either be retained or
;; # replaced later. I would guess that would be a bug.
-Wc,*)
func_stripname '-Wc,' '' "$arg"
args=$func_stripname_result
lastarg=
save_ifs=$IFS; IFS=,
for arg in $args; do
IFS=$save_ifs
func_append_quoted lastarg "$arg"
done
IFS=$save_ifs
func_stripname ' ' '' "$lastarg"
lastarg=$func_stripname_result
# Add the arguments to base_compile.
func_append base_compile " $lastarg"
continue
;;
*)
# Accept the current argument as the source file.
# The previous "srcfile" becomes the current argument.
#
lastarg=$srcfile
srcfile=$arg
;;
esac # case $arg
;;
esac # case $arg_mode
# Aesthetically quote the previous argument.
func_append_quoted base_compile "$lastarg"
done # for arg
case $arg_mode in
arg)
func_fatal_error "you must specify an argument for -Xcompile"
;;
target)
func_fatal_error "you must specify a target with '-o'"
;;
*)
# Get the name of the library object.
test -z "$libobj" && {
func_basename "$srcfile"
libobj=$func_basename_result
}
;;
esac
# Recognize several different file suffixes.
# If the user specifies -o file.o, it is replaced with file.lo
case $libobj in
*.[cCFSifmso] | \
*.ada | *.adb | *.ads | *.asm | \
*.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
*.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
func_xform "$libobj"
libobj=$func_xform_result
;;
esac
case $libobj in
*.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
*)
func_fatal_error "cannot determine name of library object from '$libobj'"
;;
esac
func_infer_tag $base_compile
for arg in $later; do
case $arg in
-shared)
test yes = "$build_libtool_libs" \
|| func_fatal_configuration "cannot build a shared library"
build_old_libs=no
continue
;;
-static)
build_libtool_libs=no
build_old_libs=yes
continue
;;
-prefer-pic)
pic_mode=yes
continue
;;
-prefer-non-pic)
pic_mode=no
continue
;;
esac
done
func_quote_arg pretty "$libobj"
test "X$libobj" != "X$func_quote_arg_result" \
&& $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
&& func_warning "libobj name '$libobj' may not contain shell special characters."
func_dirname_and_basename "$obj" "/" ""
objname=$func_basename_result
xdir=$func_dirname_result
lobj=$xdir$objdir/$objname
test -z "$base_compile" && \
func_fatal_help "you must specify a compilation command"
# Delete any leftover library objects.
if test yes = "$build_old_libs"; then
removelist="$obj $lobj $libobj ${libobj}T"
else
removelist="$lobj $libobj ${libobj}T"
fi
# On Cygwin there's no "real" PIC flag so we must build both object types
case $host_os in
cygwin* | mingw* | pw32* | os2* | cegcc*)
pic_mode=default
;;
esac
if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
# non-PIC code in shared libraries is not supported
pic_mode=default
fi
# Calculate the filename of the output object if compiler does
# not support -o with -c
if test no = "$compiler_c_o"; then
output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
lockfile=$output_obj.lock
else
output_obj=
need_locks=no
lockfile=
fi
# Lock this critical section if it is needed
# We use this script file to make the link, it avoids creating a new file
if test yes = "$need_locks"; then
until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
func_echo "Waiting for $lockfile to be removed"
sleep 2
done
elif test warn = "$need_locks"; then
if test -f "$lockfile"; then
$ECHO "\
*** ERROR, $lockfile exists and contains:
`cat $lockfile 2>/dev/null`
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
$opt_dry_run || $RM $removelist
exit $EXIT_FAILURE
fi
func_append removelist " $output_obj"
$ECHO "$srcfile" > "$lockfile"
fi
$opt_dry_run || $RM $removelist
func_append removelist " $lockfile"
trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
srcfile=$func_to_tool_file_result
func_quote_arg pretty "$srcfile"
qsrcfile=$func_quote_arg_result
# Only build a PIC object if we are building libtool libraries.
if test yes = "$build_libtool_libs"; then
# Without this assignment, base_compile gets emptied.
fbsd_hideous_sh_bug=$base_compile
if test no != "$pic_mode"; then
command="$base_compile $qsrcfile $pic_flag"
else
# Don't build PIC code
command="$base_compile $qsrcfile"
fi
func_mkdir_p "$xdir$objdir"
if test -z "$output_obj"; then
# Place PIC objects in $objdir
func_append command " -o $lobj"
fi
func_show_eval_locale "$command" \
'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
if test warn = "$need_locks" &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
$ECHO "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`
but it should contain:
$srcfile
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
$opt_dry_run || $RM $removelist
exit $EXIT_FAILURE
fi
# Just move the object if needed, then go on to compile the next one
if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
func_show_eval '$MV "$output_obj" "$lobj"' \
'error=$?; $opt_dry_run || $RM $removelist; exit $error'
fi
# Allow error messages only from the first compilation.
if test yes = "$suppress_opt"; then
suppress_output=' >/dev/null 2>&1'
fi
fi
# Only build a position-dependent object if we build old libraries.
if test yes = "$build_old_libs"; then
if test yes != "$pic_mode"; then
# Don't build PIC code
command="$base_compile $qsrcfile$pie_flag"
else
command="$base_compile $qsrcfile $pic_flag"
fi
if test yes = "$compiler_c_o"; then
func_append command " -o $obj"
fi
# Suppress compiler output if we already did a PIC compilation.
func_append command "$suppress_output"
func_show_eval_locale "$command" \
'$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
if test warn = "$need_locks" &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
$ECHO "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`
but it should contain:
$srcfile
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
$opt_dry_run || $RM $removelist
exit $EXIT_FAILURE
fi
# Just move the object if needed
if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
func_show_eval '$MV "$output_obj" "$obj"' \
'error=$?; $opt_dry_run || $RM $removelist; exit $error'
fi
fi
$opt_dry_run || {
func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
# Unlock the critical section if it was locked
if test no != "$need_locks"; then
removelist=$lockfile
$RM "$lockfile"
fi
}
exit $EXIT_SUCCESS
}
$opt_help || {
test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
}
func_mode_help ()
{
# We need to display help for each of the modes.
case $opt_mode in
"")
# Generic help is extracted from the usage comments
# at the start of this file.
func_help
;;
clean)
$ECHO \
"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
Remove files from the build directory.
RM is the name of the program to use to delete files associated with each FILE
(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
to RM.
If FILE is a libtool library, object or program, all the files associated
with it are deleted. Otherwise, only FILE itself is deleted using RM."
;;
compile)
$ECHO \
"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
Compile a source file into a libtool library object.
This mode accepts the following additional options:
-o OUTPUT-FILE set the output file name to OUTPUT-FILE
-no-suppress do not suppress compiler output for multiple passes
-prefer-pic try to build PIC objects only
-prefer-non-pic try to build non-PIC objects only
-shared do not build a '.o' file suitable for static linking
-static only build a '.o' file suitable for static linking
-Wc,FLAG
-Xcompiler FLAG pass FLAG directly to the compiler
COMPILE-COMMAND is a command to be used in creating a 'standard' object file
from the given SOURCEFILE.
The output file name is determined by removing the directory component from
SOURCEFILE, then substituting the C source code suffix '.c' with the
library object suffix, '.lo'."
;;
execute)
$ECHO \
"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
Automatically set library path, then run a program.
This mode accepts the following additional options:
-dlopen FILE add the directory containing FILE to the library path
This mode sets the library path environment variable according to '-dlopen'
flags.
If any of the ARGS are libtool executable wrappers, then they are translated
into their corresponding uninstalled binary, and any of their required library
directories are added to the library path.
Then, COMMAND is executed, with ARGS as arguments."
;;
finish)
$ECHO \
"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
Complete the installation of libtool libraries.
Each LIBDIR is a directory that contains libtool libraries.
The commands that this mode executes may require superuser privileges. Use
the '--dry-run' option if you just want to see what would be executed."
;;
install)
$ECHO \
"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
Install executables or libraries.
INSTALL-COMMAND is the installation command. The first component should be
either the 'install' or 'cp' program.
The following components of INSTALL-COMMAND are treated specially:
-inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
The rest of the components are interpreted as arguments to that command (only
BSD-compatible install options are recognized)."
;;
link)
$ECHO \
"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
Link object files or libraries together to form another library, or to
create an executable program.
LINK-COMMAND is a command using the C compiler that you would use to create
a program from several object files.
The following components of LINK-COMMAND are treated specially:
-all-static do not do any dynamic linking at all
-avoid-version do not add a version suffix if possible
-bindir BINDIR specify path to binaries directory (for systems where
libraries must be found in the PATH setting at runtime)
-dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-export-symbols SYMFILE
try to export only the symbols listed in SYMFILE
-export-symbols-regex REGEX
try to export only the symbols matching REGEX
-LLIBDIR search LIBDIR for required installed libraries
-lNAME OUTPUT-FILE requires the installed library libNAME
-module build a library that can dlopened
-no-fast-install disable the fast-install mode
-no-install link a not-installable executable
-no-undefined declare that a library does not refer to external symbols
-o OUTPUT-FILE create OUTPUT-FILE from the specified objects
-objectlist FILE use a list of object files found in FILE to specify objects
-os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes)
-precious-files-regex REGEX
don't remove output files matching REGEX
-release RELEASE specify package release information
-rpath LIBDIR the created library will eventually be installed in LIBDIR
-R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
-shared only do dynamic linking of libtool libraries
-shrext SUFFIX override the standard shared library file extension
-static do not do any dynamic linking of uninstalled libtool libraries
-static-libtool-libs
do not do any dynamic linking of libtool libraries
-version-info CURRENT[:REVISION[:AGE]]
specify library version info [each variable defaults to 0]
-weak LIBNAME declare that the target provides the LIBNAME interface
-Wc,FLAG
-Xcompiler FLAG pass linker-specific FLAG directly to the compiler
-Wa,FLAG
-Xassembler FLAG pass linker-specific FLAG directly to the assembler
-Wl,FLAG
-Xlinker FLAG pass linker-specific FLAG directly to the linker
-XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
All other options (arguments beginning with '-') are ignored.
Every other argument is treated as a filename. Files ending in '.la' are
treated as uninstalled libtool libraries, other files are standard or library
object files.
If the OUTPUT-FILE ends in '.la', then a libtool library is created,
only library objects ('.lo' files) may be specified, and '-rpath' is
required, except when creating a convenience library.
If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
using 'ar' and 'ranlib', or on Windows using 'lib'.
If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
is created, otherwise an executable program is created."
;;
uninstall)
$ECHO \
"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
Remove libraries from an installation directory.
RM is the name of the program to use to delete files associated with each FILE
(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
to RM.
If FILE is a libtool library, all the files associated with it are deleted.
Otherwise, only FILE itself is deleted using RM."
;;
*)
func_fatal_help "invalid operation mode '$opt_mode'"
;;
esac
echo
$ECHO "Try '$progname --help' for more information about other modes."
}
# Now that we've collected a possible --mode arg, show help if necessary
if $opt_help; then
if test : = "$opt_help"; then
func_mode_help
else
{
func_help noexit
for opt_mode in compile link execute install finish uninstall clean; do
func_mode_help
done
} | $SED -n '1p; 2,$s/^Usage:/ or: /p'
{
func_help noexit
for opt_mode in compile link execute install finish uninstall clean; do
echo
func_mode_help
done
} |
$SED '1d
/^When reporting/,/^Report/{
H
d
}
$x
/information about other modes/d
/more detailed .*MODE/d
s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
fi
exit $?
fi
# func_mode_execute arg...
func_mode_execute ()
{
$debug_cmd
# The first argument is the command name.
cmd=$nonopt
test -z "$cmd" && \
func_fatal_help "you must specify a COMMAND"
# Handle -dlopen flags immediately.
for file in $opt_dlopen; do
test -f "$file" \
|| func_fatal_help "'$file' is not a file"
dir=
case $file in
*.la)
func_resolve_sysroot "$file"
file=$func_resolve_sysroot_result
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
|| func_fatal_help "'$lib' is not a valid libtool archive"
# Read the libtool library.
dlname=
library_names=
func_source "$file"
# Skip this library if it cannot be dlopened.
if test -z "$dlname"; then
# Warn if it was a shared library.
test -n "$library_names" && \
func_warning "'$file' was not linked with '-export-dynamic'"
continue
fi
func_dirname "$file" "" "."
dir=$func_dirname_result
if test -f "$dir/$objdir/$dlname"; then
func_append dir "/$objdir"
else
if test ! -f "$dir/$dlname"; then
func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
fi
fi
;;
*.lo)
# Just add the directory containing the .lo file.
func_dirname "$file" "" "."
dir=$func_dirname_result
;;
*)
func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
continue
;;
esac
# Get the absolute pathname.
absdir=`cd "$dir" && pwd`
test -n "$absdir" && dir=$absdir
# Now add the directory to shlibpath_var.
if eval "test -z \"\$$shlibpath_var\""; then
eval "$shlibpath_var=\"\$dir\""
else
eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
fi
done
# This variable tells wrapper scripts just to set shlibpath_var
# rather than running their programs.
libtool_execute_magic=$magic
# Check if any of the arguments is a wrapper script.
args=
for file
do
case $file in
-* | *.la | *.lo ) ;;
*)
# Do a test to see if this is really a libtool program.
if func_ltwrapper_script_p "$file"; then
func_source "$file"
# Transform arg to wrapped name.
file=$progdir/$program
elif func_ltwrapper_executable_p "$file"; then
func_ltwrapper_scriptname "$file"
func_source "$func_ltwrapper_scriptname_result"
# Transform arg to wrapped name.
file=$progdir/$program
fi
;;
esac
# Quote arguments (to preserve shell metacharacters).
func_append_quoted args "$file"
done
if $opt_dry_run; then
# Display what would be done.
if test -n "$shlibpath_var"; then
eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
echo "export $shlibpath_var"
fi
$ECHO "$cmd$args"
exit $EXIT_SUCCESS
else
if test -n "$shlibpath_var"; then
# Export the shlibpath_var.
eval "export $shlibpath_var"
fi
# Restore saved environment variables
for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
eval "if test \"\${save_$lt_var+set}\" = set; then
$lt_var=\$save_$lt_var; export $lt_var
else
$lt_unset $lt_var
fi"
done
# Now prepare to actually exec the command.
exec_cmd=\$cmd$args
fi
}
test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
# func_mode_finish arg...
func_mode_finish ()
{
$debug_cmd
libs=
libdirs=
admincmds=
for opt in "$nonopt" ${1+"$@"}
do
if test -d "$opt"; then
func_append libdirs " $opt"
elif test -f "$opt"; then
if func_lalib_unsafe_p "$opt"; then
func_append libs " $opt"
else
func_warning "'$opt' is not a valid libtool archive"
fi
else
func_fatal_error "invalid argument '$opt'"
fi
done
if test -n "$libs"; then
if test -n "$lt_sysroot"; then
sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
else
sysroot_cmd=
fi
# Remove sysroot references
if $opt_dry_run; then
for lib in $libs; do
echo "removing references to $lt_sysroot and '=' prefixes from $lib"
done
else
tmpdir=`func_mktempdir`
for lib in $libs; do
$SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
> $tmpdir/tmp-la
mv -f $tmpdir/tmp-la $lib
done
${RM}r "$tmpdir"
fi
fi
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
for libdir in $libdirs; do
if test -n "$finish_cmds"; then
# Do each command in the finish commands.
func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
'"$cmd"'"'
fi
if test -n "$finish_eval"; then
# Do the single finish_eval.
eval cmds=\"$finish_eval\"
$opt_dry_run || eval "$cmds" || func_append admincmds "
$cmds"
fi
done
fi
# Exit here if they wanted silent mode.
$opt_quiet && exit $EXIT_SUCCESS
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
echo "----------------------------------------------------------------------"
echo "Libraries have been installed in:"
for libdir in $libdirs; do
$ECHO " $libdir"
done
echo
echo "If you ever happen to want to link against installed libraries"
echo "in a given directory, LIBDIR, you must either use libtool, and"
echo "specify the full pathname of the library, or use the '-LLIBDIR'"
echo "flag during linking and do at least one of the following:"
if test -n "$shlibpath_var"; then
echo " - add LIBDIR to the '$shlibpath_var' environment variable"
echo " during execution"
fi
if test -n "$runpath_var"; then
echo " - add LIBDIR to the '$runpath_var' environment variable"
echo " during linking"
fi
if test -n "$hardcode_libdir_flag_spec"; then
libdir=LIBDIR
eval flag=\"$hardcode_libdir_flag_spec\"
$ECHO " - use the '$flag' linker flag"
fi
if test -n "$admincmds"; then
$ECHO " - have your system administrator run these commands:$admincmds"
fi
if test -f /etc/ld.so.conf; then
echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
fi
echo
echo "See any operating system documentation about shared libraries for"
case $host in
solaris2.[6789]|solaris2.1[0-9])
echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
echo "pages."
;;
*)
echo "more information, such as the ld(1) and ld.so(8) manual pages."
;;
esac
echo "----------------------------------------------------------------------"
fi
exit $EXIT_SUCCESS
}
test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
# func_mode_install arg...
func_mode_install ()
{
$debug_cmd
# There may be an optional sh(1) argument at the beginning of
# install_prog (especially on Windows NT).
if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
# Allow the use of GNU shtool's install command.
case $nonopt in *shtool*) :;; *) false;; esac
then
# Aesthetically quote it.
func_quote_arg pretty "$nonopt"
install_prog="$func_quote_arg_result "
arg=$1
shift
else
install_prog=
arg=$nonopt
fi
# The real first argument should be the name of the installation program.
# Aesthetically quote it.
func_quote_arg pretty "$arg"
func_append install_prog "$func_quote_arg_result"
install_shared_prog=$install_prog
case " $install_prog " in
*[\\\ /]cp\ *) install_cp=: ;;
*) install_cp=false ;;
esac
# We need to accept at least all the BSD install flags.
dest=
files=
opts=
prev=
install_type=
isdir=false
stripme=
no_mode=:
for arg
do
arg2=
if test -n "$dest"; then
func_append files " $dest"
dest=$arg
continue
fi
case $arg in
-d) isdir=: ;;
-f)
if $install_cp; then :; else
prev=$arg
fi
;;
-g | -m | -o)
prev=$arg
;;
-s)
stripme=" -s"
continue
;;
-*)
;;
*)
# If the previous option needed an argument, then skip it.
if test -n "$prev"; then
if test X-m = "X$prev" && test -n "$install_override_mode"; then
arg2=$install_override_mode
no_mode=false
fi
prev=
else
dest=$arg
continue
fi
;;
esac
# Aesthetically quote the argument.
func_quote_arg pretty "$arg"
func_append install_prog " $func_quote_arg_result"
if test -n "$arg2"; then
func_quote_arg pretty "$arg2"
fi
func_append install_shared_prog " $func_quote_arg_result"
done
test -z "$install_prog" && \
func_fatal_help "you must specify an install program"
test -n "$prev" && \
func_fatal_help "the '$prev' option requires an argument"
if test -n "$install_override_mode" && $no_mode; then
if $install_cp; then :; else
func_quote_arg pretty "$install_override_mode"
func_append install_shared_prog " -m $func_quote_arg_result"
fi
fi
if test -z "$files"; then
if test -z "$dest"; then
func_fatal_help "no file or destination specified"
else
func_fatal_help "you must specify a destination"
fi
fi
# Strip any trailing slash from the destination.
func_stripname '' '/' "$dest"
dest=$func_stripname_result
# Check to see that the destination is a directory.
test -d "$dest" && isdir=:
if $isdir; then
destdir=$dest
destname=
else
func_dirname_and_basename "$dest" "" "."
destdir=$func_dirname_result
destname=$func_basename_result
# Not a directory, so check to see that there is only one file specified.
set dummy $files; shift
test "$#" -gt 1 && \
func_fatal_help "'$dest' is not a directory"
fi
case $destdir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
for file in $files; do
case $file in
*.lo) ;;
*)
func_fatal_help "'$destdir' must be an absolute directory name"
;;
esac
done
;;
esac
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
libtool_install_magic=$magic
staticlibs=
future_libdirs=
current_libdirs=
for file in $files; do
# Do each installation.
case $file in
*.$libext)
# Do the static libraries later.
func_append staticlibs " $file"
;;
*.la)
func_resolve_sysroot "$file"
file=$func_resolve_sysroot_result
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
|| func_fatal_help "'$file' is not a valid libtool archive"
library_names=
old_library=
relink_command=
func_source "$file"
# Add the libdir to current_libdirs if it is the destination.
if test "X$destdir" = "X$libdir"; then
case "$current_libdirs " in
*" $libdir "*) ;;
*) func_append current_libdirs " $libdir" ;;
esac
else
# Note the libdir as a future libdir.
case "$future_libdirs " in
*" $libdir "*) ;;
*) func_append future_libdirs " $libdir" ;;
esac
fi
func_dirname "$file" "/" ""
dir=$func_dirname_result
func_append dir "$objdir"
if test -n "$relink_command"; then
# Determine the prefix the user has applied to our future dir.
inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
# Don't allow the user to place us outside of our expected
# location b/c this prevents finding dependent libraries that
# are installed to the same prefix.
# At present, this check doesn't affect windows .dll's that
# are installed into $libdir/../bin (currently, that works fine)
# but it's something to keep an eye on.
test "$inst_prefix_dir" = "$destdir" && \
func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir"
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
else
relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
fi
func_warning "relinking '$file'"
func_show_eval "$relink_command" \
'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
fi
# See the names of the shared library.
set dummy $library_names; shift
if test -n "$1"; then
realname=$1
shift
srcname=$realname
test -n "$relink_command" && srcname=${realname}T
# Install the shared library and build the symlinks.
func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
'exit $?'
tstripme=$stripme
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
case $realname in
*.dll.a)
tstripme=
;;
esac
;;
os2*)
case $realname in
*_dll.a)
tstripme=
;;
esac
;;
esac
if test -n "$tstripme" && test -n "$striplib"; then
func_show_eval "$striplib $destdir/$realname" 'exit $?'
fi
if test "$#" -gt 0; then
# Delete the old symlinks, and create new ones.
# Try 'ln -sf' first, because the 'ln' binary might depend on
# the symlink we replace! Solaris /bin/ln does not understand -f,
# so we also need to try rm && ln -s.
for linkname
do
test "$linkname" != "$realname" \
&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
done
fi
# Do each command in the postinstall commands.
lib=$destdir/$realname
func_execute_cmds "$postinstall_cmds" 'exit $?'
fi
# Install the pseudo-library for information purposes.
func_basename "$file"
name=$func_basename_result
instname=$dir/${name}i
func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
# Maybe install the static library, too.
test -n "$old_library" && func_append staticlibs " $dir/$old_library"
;;
*.lo)
# Install (i.e. copy) a libtool object.
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
destfile=$destdir/$destname
else
func_basename "$file"
destfile=$func_basename_result
destfile=$destdir/$destfile
fi
# Deduce the name of the destination old-style object file.
case $destfile in
*.lo)
func_lo2o "$destfile"
staticdest=$func_lo2o_result
;;
*.$objext)
staticdest=$destfile
destfile=
;;
*)
func_fatal_help "cannot copy a libtool object to '$destfile'"
;;
esac
# Install the libtool object if requested.
test -n "$destfile" && \
func_show_eval "$install_prog $file $destfile" 'exit $?'
# Install the old object if enabled.
if test yes = "$build_old_libs"; then
# Deduce the name of the old-style object file.
func_lo2o "$file"
staticobj=$func_lo2o_result
func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
fi
exit $EXIT_SUCCESS
;;
*)
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
destfile=$destdir/$destname
else
func_basename "$file"
destfile=$func_basename_result
destfile=$destdir/$destfile
fi
# If the file is missing, and there is a .exe on the end, strip it
# because it is most likely a libtool script we actually want to
# install
stripped_ext=
case $file in
*.exe)
if test ! -f "$file"; then
func_stripname '' '.exe' "$file"
file=$func_stripname_result
stripped_ext=.exe
fi
;;
esac
# Do a test to see if this is really a libtool program.
case $host in
*cygwin* | *mingw*)
if func_ltwrapper_executable_p "$file"; then
func_ltwrapper_scriptname "$file"
wrapper=$func_ltwrapper_scriptname_result
else
func_stripname '' '.exe' "$file"
wrapper=$func_stripname_result
fi
;;
*)
wrapper=$file
;;
esac
if func_ltwrapper_script_p "$wrapper"; then
notinst_deplibs=
relink_command=
func_source "$wrapper"
# Check the variables that should have been set.
test -z "$generated_by_libtool_version" && \
func_fatal_error "invalid libtool wrapper script '$wrapper'"
finalize=:
for lib in $notinst_deplibs; do
# Check to see that each library is installed.
libdir=
if test -f "$lib"; then
func_source "$lib"
fi
libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
if test -n "$libdir" && test ! -f "$libfile"; then
func_warning "'$lib' has not been installed in '$libdir'"
finalize=false
fi
done
relink_command=
func_source "$wrapper"
outputname=
if test no = "$fast_install" && test -n "$relink_command"; then
$opt_dry_run || {
if $finalize; then
tmpdir=`func_mktempdir`
func_basename "$file$stripped_ext"
file=$func_basename_result
outputname=$tmpdir/$file
# Replace the output file specification.
relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
$opt_quiet || {
func_quote_arg expand,pretty "$relink_command"
eval "func_echo $func_quote_arg_result"
}
if eval "$relink_command"; then :
else
func_error "error: relink '$file' with the above command before installing it"
$opt_dry_run || ${RM}r "$tmpdir"
continue
fi
file=$outputname
else
func_warning "cannot relink '$file'"
fi
}
else
# Install the binary that we compiled earlier.
file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
fi
fi
# remove .exe since cygwin /usr/bin/install will append another
# one anyway
case $install_prog,$host in
*/usr/bin/install*,*cygwin*)
case $file:$destfile in
*.exe:*.exe)
# this is ok
;;
*.exe:*)
destfile=$destfile.exe
;;
*:*.exe)
func_stripname '' '.exe' "$destfile"
destfile=$func_stripname_result
;;
esac
;;
esac
func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
$opt_dry_run || if test -n "$outputname"; then
${RM}r "$tmpdir"
fi
;;
esac
done
for file in $staticlibs; do
func_basename "$file"
name=$func_basename_result
# Set up the ranlib parameters.
oldlib=$destdir/$name
func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
tool_oldlib=$func_to_tool_file_result
func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
if test -n "$stripme" && test -n "$old_striplib"; then
func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
fi
# Do each command in the postinstall commands.
func_execute_cmds "$old_postinstall_cmds" 'exit $?'
done
test -n "$future_libdirs" && \
func_warning "remember to run '$progname --finish$future_libdirs'"
if test -n "$current_libdirs"; then
# Maybe just do a dry run.
$opt_dry_run && current_libdirs=" -n$current_libdirs"
exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
else
exit $EXIT_SUCCESS
fi
}
test install = "$opt_mode" && func_mode_install ${1+"$@"}
# func_generate_dlsyms outputname originator pic_p
# Extract symbols from dlprefiles and create ${outputname}S.o with
# a dlpreopen symbol table.
func_generate_dlsyms ()
{
$debug_cmd
my_outputname=$1
my_originator=$2
my_pic_p=${3-false}
my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
my_dlsyms=
if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
if test -n "$NM" && test -n "$global_symbol_pipe"; then
my_dlsyms=${my_outputname}S.c
else
func_error "not configured to extract global symbols from dlpreopened files"
fi
fi
if test -n "$my_dlsyms"; then
case $my_dlsyms in
"") ;;
*.c)
# Discover the nlist of each of the dlfiles.
nlist=$output_objdir/$my_outputname.nm
func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
# Parse the name list into a source file.
func_verbose "creating $output_objdir/$my_dlsyms"
$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
#ifdef __cplusplus
extern \"C\" {
#endif
#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
#endif
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT_DLSYM_CONST
#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT_DLSYM_CONST
#else
# define LT_DLSYM_CONST const
#endif
#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
/* External symbol declarations for the compiler. */\
"
if test yes = "$dlself"; then
func_verbose "generating symbol list for '$output'"
$opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
# Add our own program objects to the symbol list.
progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
for progfile in $progfiles; do
func_to_tool_file "$progfile" func_convert_file_msys_to_w32
func_verbose "extracting global C symbols from '$func_to_tool_file_result'"
$opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
done
if test -n "$exclude_expsyms"; then
$opt_dry_run || {
eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
eval '$MV "$nlist"T "$nlist"'
}
fi
if test -n "$export_symbols_regex"; then
$opt_dry_run || {
eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
eval '$MV "$nlist"T "$nlist"'
}
fi
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
export_symbols=$output_objdir/$outputname.exp
$opt_dry_run || {
$RM $export_symbols
eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
case $host in
*cygwin* | *mingw* | *cegcc* )
eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
;;
esac
}
else
$opt_dry_run || {
eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
eval '$MV "$nlist"T "$nlist"'
case $host in
*cygwin* | *mingw* | *cegcc* )
eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
;;
esac
}
fi
fi
for dlprefile in $dlprefiles; do
func_verbose "extracting global C symbols from '$dlprefile'"
func_basename "$dlprefile"
name=$func_basename_result
case $host in
*cygwin* | *mingw* | *cegcc* )
# if an import library, we need to obtain dlname
if func_win32_import_lib_p "$dlprefile"; then
func_tr_sh "$dlprefile"
eval "curr_lafile=\$libfile_$func_tr_sh_result"
dlprefile_dlbasename=
if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
# Use subshell, to avoid clobbering current variable values
dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
if test -n "$dlprefile_dlname"; then
func_basename "$dlprefile_dlname"
dlprefile_dlbasename=$func_basename_result
else
# no lafile. user explicitly requested -dlpreopen .
$sharedlib_from_linklib_cmd "$dlprefile"
dlprefile_dlbasename=$sharedlib_from_linklib_result
fi
fi
$opt_dry_run || {
if test -n "$dlprefile_dlbasename"; then
eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
else
func_warning "Could not compute DLL name from $name"
eval '$ECHO ": $name " >> "$nlist"'
fi
func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
$SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
}
else # not an import lib
$opt_dry_run || {
eval '$ECHO ": $name " >> "$nlist"'
func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
}
fi
;;
*)
$opt_dry_run || {
eval '$ECHO ": $name " >> "$nlist"'
func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
}
;;
esac
done
$opt_dry_run || {
# Make sure we have at least an empty file.
test -f "$nlist" || : > "$nlist"
if test -n "$exclude_expsyms"; then
$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
$MV "$nlist"T "$nlist"
fi
# Try sorting and uniquifying the output.
if $GREP -v "^: " < "$nlist" |
if sort -k 3 /dev/null 2>&1; then
sort -k 3
else
sort +2
fi |
uniq > "$nlist"S; then
:
else
$GREP -v "^: " < "$nlist" > "$nlist"S
fi
if test -f "$nlist"S; then
eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
else
echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
fi
func_show_eval '$RM "${nlist}I"'
if test -n "$global_symbol_to_import"; then
eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
fi
echo >> "$output_objdir/$my_dlsyms" "\
/* The mapping between symbol names and symbols. */
typedef struct {
const char *name;
void *address;
} lt_dlsymlist;
extern LT_DLSYM_CONST lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[];\
"
if test -s "$nlist"I; then
echo >> "$output_objdir/$my_dlsyms" "\
static void lt_syminit(void)
{
LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
for (; symbol->name; ++symbol)
{"
$SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
echo >> "$output_objdir/$my_dlsyms" "\
}
}"
fi
echo >> "$output_objdir/$my_dlsyms" "\
LT_DLSYM_CONST lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[] =
{ {\"$my_originator\", (void *) 0},"
if test -s "$nlist"I; then
echo >> "$output_objdir/$my_dlsyms" "\
{\"@INIT@\", (void *) <_syminit},"
fi
case $need_lib_prefix in
no)
eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
;;
*)
eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
;;
esac
echo >> "$output_objdir/$my_dlsyms" "\
{0, (void *) 0}
};
/* This works around a problem in FreeBSD linker */
#ifdef FREEBSD_WORKAROUND
static const void *lt_preloaded_setup() {
return lt_${my_prefix}_LTX_preloaded_symbols;
}
#endif
#ifdef __cplusplus
}
#endif\
"
} # !$opt_dry_run
pic_flag_for_symtable=
case "$compile_command " in
*" -static "*) ;;
*)
case $host in
# compiling the symbol table file with pic_flag works around
# a FreeBSD bug that causes programs to crash when -lm is
# linked before any other PIC object. But we must not use
# pic_flag when linking with -static. The problem exists in
# FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
*-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
*-*-hpux*)
pic_flag_for_symtable=" $pic_flag" ;;
*)
$my_pic_p && pic_flag_for_symtable=" $pic_flag"
;;
esac
;;
esac
symtab_cflags=
for arg in $LTCFLAGS; do
case $arg in
-pie | -fpie | -fPIE) ;;
*) func_append symtab_cflags " $arg" ;;
esac
done
# Now compile the dynamic symbol file.
func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
# Clean up the generated files.
func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'
# Transform the symbol file into the correct name.
symfileobj=$output_objdir/${my_outputname}S.$objext
case $host in
*cygwin* | *mingw* | *cegcc* )
if test -f "$output_objdir/$my_outputname.def"; then
compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
else
compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
fi
;;
*)
compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
;;
esac
;;
*)
func_fatal_error "unknown suffix for '$my_dlsyms'"
;;
esac
else
# We keep going just in case the user didn't refer to
# lt_preloaded_symbols. The linker will fail if global_symbol_pipe
# really was required.
# Nullify the symbol file.
compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
fi
}
# func_cygming_gnu_implib_p ARG
# This predicate returns with zero status (TRUE) if
# ARG is a GNU/binutils-style import library. Returns
# with nonzero status (FALSE) otherwise.
func_cygming_gnu_implib_p ()
{
$debug_cmd
func_to_tool_file "$1" func_convert_file_msys_to_w32
func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
test -n "$func_cygming_gnu_implib_tmp"
}
# func_cygming_ms_implib_p ARG
# This predicate returns with zero status (TRUE) if
# ARG is an MS-style import library. Returns
# with nonzero status (FALSE) otherwise.
func_cygming_ms_implib_p ()
{
$debug_cmd
func_to_tool_file "$1" func_convert_file_msys_to_w32
func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
test -n "$func_cygming_ms_implib_tmp"
}
# func_win32_libid arg
# return the library type of file 'arg'
#
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
# Despite the name, also deal with 64 bit binaries.
func_win32_libid ()
{
$debug_cmd
win32_libid_type=unknown
win32_fileres=`file -L $1 2>/dev/null`
case $win32_fileres in
*ar\ archive\ import\ library*) # definitely import
win32_libid_type="x86 archive import"
;;
*ar\ archive*) # could be an import, or static
# Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
$EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
case $nm_interface in
"MS dumpbin")
if func_cygming_ms_implib_p "$1" ||
func_cygming_gnu_implib_p "$1"
then
win32_nmres=import
else
win32_nmres=
fi
;;
*)
func_to_tool_file "$1" func_convert_file_msys_to_w32
win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
$SED -n -e '
1,100{
/ I /{
s|.*|import|
p
q
}
}'`
;;
esac
case $win32_nmres in
import*) win32_libid_type="x86 archive import";;
*) win32_libid_type="x86 archive static";;
esac
fi
;;
*DLL*)
win32_libid_type="x86 DLL"
;;
*executable*) # but shell scripts are "executable" too...
case $win32_fileres in
*MS\ Windows\ PE\ Intel*)
win32_libid_type="x86 DLL"
;;
esac
;;
esac
$ECHO "$win32_libid_type"
}
# func_cygming_dll_for_implib ARG
#
# Platform-specific function to extract the
# name of the DLL associated with the specified
# import library ARG.
# Invoked by eval'ing the libtool variable
# $sharedlib_from_linklib_cmd
# Result is available in the variable
# $sharedlib_from_linklib_result
func_cygming_dll_for_implib ()
{
$debug_cmd
sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
}
# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
#
# The is the core of a fallback implementation of a
# platform-specific function to extract the name of the
# DLL associated with the specified import library LIBNAME.
#
# SECTION_NAME is either .idata$6 or .idata$7, depending
# on the platform and compiler that created the implib.
#
# Echos the name of the DLL associated with the
# specified import library.
func_cygming_dll_for_implib_fallback_core ()
{
$debug_cmd
match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
$OBJDUMP -s --section "$1" "$2" 2>/dev/null |
$SED '/^Contents of section '"$match_literal"':/{
# Place marker at beginning of archive member dllname section
s/.*/====MARK====/
p
d
}
# These lines can sometimes be longer than 43 characters, but
# are always uninteresting
/:[ ]*file format pe[i]\{,1\}-/d
/^In archive [^:]*:/d
# Ensure marker is printed
/^====MARK====/p
# Remove all lines with less than 43 characters
/^.\{43\}/!d
# From remaining lines, remove first 43 characters
s/^.\{43\}//' |
$SED -n '
# Join marker and all lines until next marker into a single line
/^====MARK====/ b para
H
$ b para
b
:para
x
s/\n//g
# Remove the marker
s/^====MARK====//
# Remove trailing dots and whitespace
s/[\. \t]*$//
# Print
/./p' |
# we now have a list, one entry per line, of the stringified
# contents of the appropriate section of all members of the
# archive that possess that section. Heuristic: eliminate
# all those that have a first or second character that is
# a '.' (that is, objdump's representation of an unprintable
# character.) This should work for all archives with less than
# 0x302f exports -- but will fail for DLLs whose name actually
# begins with a literal '.' or a single character followed by
# a '.'.
#
# Of those that remain, print the first one.
$SED -e '/^\./d;/^.\./d;q'
}
# func_cygming_dll_for_implib_fallback ARG
# Platform-specific function to extract the
# name of the DLL associated with the specified
# import library ARG.
#
# This fallback implementation is for use when $DLLTOOL
# does not support the --identify-strict option.
# Invoked by eval'ing the libtool variable
# $sharedlib_from_linklib_cmd
# Result is available in the variable
# $sharedlib_from_linklib_result
func_cygming_dll_for_implib_fallback ()
{
$debug_cmd
if func_cygming_gnu_implib_p "$1"; then
# binutils import library
sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
elif func_cygming_ms_implib_p "$1"; then
# ms-generated import library
sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
else
# unknown
sharedlib_from_linklib_result=
fi
}
# func_extract_an_archive dir oldlib
func_extract_an_archive ()
{
$debug_cmd
f_ex_an_ar_dir=$1; shift
f_ex_an_ar_oldlib=$1
if test yes = "$lock_old_archive_extraction"; then
lockfile=$f_ex_an_ar_oldlib.lock
until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
func_echo "Waiting for $lockfile to be removed"
sleep 2
done
fi
func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
'stat=$?; rm -f "$lockfile"; exit $stat'
if test yes = "$lock_old_archive_extraction"; then
$opt_dry_run || rm -f "$lockfile"
fi
if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
:
else
func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
fi
}
# func_extract_archives gentop oldlib ...
func_extract_archives ()
{
$debug_cmd
my_gentop=$1; shift
my_oldlibs=${1+"$@"}
my_oldobjs=
my_xlib=
my_xabs=
my_xdir=
for my_xlib in $my_oldlibs; do
# Extract the objects.
case $my_xlib in
[\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
*) my_xabs=`pwd`"/$my_xlib" ;;
esac
func_basename "$my_xlib"
my_xlib=$func_basename_result
my_xlib_u=$my_xlib
while :; do
case " $extracted_archives " in
*" $my_xlib_u "*)
func_arith $extracted_serial + 1
extracted_serial=$func_arith_result
my_xlib_u=lt$extracted_serial-$my_xlib ;;
*) break ;;
esac
done
extracted_archives="$extracted_archives $my_xlib_u"
my_xdir=$my_gentop/$my_xlib_u
func_mkdir_p "$my_xdir"
case $host in
*-darwin*)
func_verbose "Extracting $my_xabs"
# Do not bother doing anything if just a dry run
$opt_dry_run || {
darwin_orig_dir=`pwd`
cd $my_xdir || exit $?
darwin_archive=$my_xabs
darwin_curdir=`pwd`
func_basename "$darwin_archive"
darwin_base_archive=$func_basename_result
darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
if test -n "$darwin_arches"; then
darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
darwin_arch=
func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
for darwin_arch in $darwin_arches; do
func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
$LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
cd "unfat-$$/$darwin_base_archive-$darwin_arch"
func_extract_an_archive "`pwd`" "$darwin_base_archive"
cd "$darwin_curdir"
$RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
done # $darwin_arches
## Okay now we've a bunch of thin objects, gotta fatten them up :)
darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
darwin_file=
darwin_files=
for darwin_file in $darwin_filelist; do
darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
$LIPO -create -output "$darwin_file" $darwin_files
done # $darwin_filelist
$RM -rf unfat-$$
cd "$darwin_orig_dir"
else
cd $darwin_orig_dir
func_extract_an_archive "$my_xdir" "$my_xabs"
fi # $darwin_arches
} # !$opt_dry_run
;;
*)
func_extract_an_archive "$my_xdir" "$my_xabs"
;;
esac
my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
done
func_extract_archives_result=$my_oldobjs
}
# func_emit_wrapper [arg=no]
#
# Emit a libtool wrapper script on stdout.
# Don't directly open a file because we may want to
# incorporate the script contents within a cygwin/mingw
# wrapper executable. Must ONLY be called from within
# func_mode_link because it depends on a number of variables
# set therein.
#
# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
# variable will take. If 'yes', then the emitted script
# will assume that the directory where it is stored is
# the $objdir directory. This is a cygwin/mingw-specific
# behavior.
func_emit_wrapper ()
{
func_emit_wrapper_arg1=${1-no}
$ECHO "\
#! $SHELL
# $output - temporary wrapper script for $objdir/$outputname
# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# The $output program cannot be directly executed until all the libtool
# libraries that it depends on are installed.
#
# This wrapper script should never be moved out of the build directory.
# If it is, it will not operate correctly.
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
sed_quote_subst='$sed_quote_subst'
# Be Bourne compatible
if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
# is contrary to our usage. Disable this feature.
alias -g '\${1+\"\$@\"}'='\"\$@\"'
setopt NO_GLOB_SUBST
else
case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
fi
BIN_SH=xpg4; export BIN_SH # for Tru64
DUALCASE=1; export DUALCASE # for MKS sh
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
relink_command=\"$relink_command\"
# This environment variable determines our operation mode.
if test \"\$libtool_install_magic\" = \"$magic\"; then
# install mode needs the following variables:
generated_by_libtool_version='$macro_version'
notinst_deplibs='$notinst_deplibs'
else
# When we are sourced in execute mode, \$file and \$ECHO are already set.
if test \"\$libtool_execute_magic\" != \"$magic\"; then
file=\"\$0\""
func_quote_arg pretty "$ECHO"
qECHO=$func_quote_arg_result
$ECHO "\
# A function that is used when there is no print builtin or printf.
func_fallback_echo ()
{
eval 'cat <<_LTECHO_EOF
\$1
_LTECHO_EOF'
}
ECHO=$qECHO
fi
# Very basic option parsing. These options are (a) specific to
# the libtool wrapper, (b) are identical between the wrapper
# /script/ and the wrapper /executable/ that is used only on
# windows platforms, and (c) all begin with the string "--lt-"
# (application programs are unlikely to have options that match
# this pattern).
#
# There are only two supported options: --lt-debug and
# --lt-dump-script. There is, deliberately, no --lt-help.
#
# The first argument to this parsing function should be the
# script's $0 value, followed by "$@".
lt_option_debug=
func_parse_lt_options ()
{
lt_script_arg0=\$0
shift
for lt_opt
do
case \"\$lt_opt\" in
--lt-debug) lt_option_debug=1 ;;
--lt-dump-script)
lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
cat \"\$lt_dump_D/\$lt_dump_F\"
exit 0
;;
--lt-*)
\$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
exit 1
;;
esac
done
# Print the debug banner immediately:
if test -n \"\$lt_option_debug\"; then
echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
fi
}
# Used when --lt-debug. Prints its arguments to stdout
# (redirection is the responsibility of the caller)
func_lt_dump_args ()
{
lt_dump_args_N=1;
for lt_arg
do
\$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
done
}
# Core function for launching the target application
func_exec_program_core ()
{
"
case $host in
# Backslashes separate directories on plain windows
*-*-mingw | *-*-os2* | *-cegcc*)
$ECHO "\
if test -n \"\$lt_option_debug\"; then
\$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2
func_lt_dump_args \${1+\"\$@\"} 1>&2
fi
exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
"
;;
*)
$ECHO "\
if test -n \"\$lt_option_debug\"; then
\$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2
func_lt_dump_args \${1+\"\$@\"} 1>&2
fi
exec \"\$progdir/\$program\" \${1+\"\$@\"}
"
;;
esac
$ECHO "\
\$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
exit 1
}
# A function to encapsulate launching the target application
# Strips options in the --lt-* namespace from \$@ and
# launches target application with the remaining arguments.
func_exec_program ()
{
case \" \$* \" in
*\\ --lt-*)
for lt_wr_arg
do
case \$lt_wr_arg in
--lt-*) ;;
*) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
esac
shift
done ;;
esac
func_exec_program_core \${1+\"\$@\"}
}
# Parse options
func_parse_lt_options \"\$0\" \${1+\"\$@\"}
# Find the directory that this script lives in.
thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
test \"x\$thisdir\" = \"x\$file\" && thisdir=.
# Follow symbolic links until we get to the real thisdir.
file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
while test -n \"\$file\"; do
destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
# If there was a directory component, then change thisdir.
if test \"x\$destdir\" != \"x\$file\"; then
case \"\$destdir\" in
[\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
*) thisdir=\"\$thisdir/\$destdir\" ;;
esac
fi
file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
done
# Usually 'no', except on cygwin/mingw when embedded into
# the cwrapper.
WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
# special case for '.'
if test \"\$thisdir\" = \".\"; then
thisdir=\`pwd\`
fi
# remove .libs from thisdir
case \"\$thisdir\" in
*[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
$objdir ) thisdir=. ;;
esac
fi
# Try to get the absolute directory name.
absdir=\`cd \"\$thisdir\" && pwd\`
test -n \"\$absdir\" && thisdir=\"\$absdir\"
"
if test yes = "$fast_install"; then
$ECHO "\
program=lt-'$outputname'$exeext
progdir=\"\$thisdir/$objdir\"
if test ! -f \"\$progdir/\$program\" ||
{ file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
test \"X\$file\" != \"X\$progdir/\$program\"; }; then
file=\"\$\$-\$program\"
if test ! -d \"\$progdir\"; then
$MKDIR \"\$progdir\"
else
$RM \"\$progdir/\$file\"
fi"
$ECHO "\
# relink executable if necessary
if test -n \"\$relink_command\"; then
if relink_command_output=\`eval \$relink_command 2>&1\`; then :
else
\$ECHO \"\$relink_command_output\" >&2
$RM \"\$progdir/\$file\"
exit 1
fi
fi
$MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
{ $RM \"\$progdir/\$program\";
$MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
$RM \"\$progdir/\$file\"
fi"
else
$ECHO "\
program='$outputname'
progdir=\"\$thisdir/$objdir\"
"
fi
$ECHO "\
if test -f \"\$progdir/\$program\"; then"
# fixup the dll searchpath if we need to.
#
# Fix the DLL searchpath if we need to. Do this before prepending
# to shlibpath, because on Windows, both are PATH and uninstalled
# libraries must come first.
if test -n "$dllsearchpath"; then
$ECHO "\
# Add the dll search path components to the executable PATH
PATH=$dllsearchpath:\$PATH
"
fi
# Export our shlibpath_var if we have one.
if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
$ECHO "\
# Add our own library path to $shlibpath_var
$shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
# Some systems cannot cope with colon-terminated $shlibpath_var
# The second colon is a workaround for a bug in BeOS R4 sed
$shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
export $shlibpath_var
"
fi
$ECHO "\
if test \"\$libtool_execute_magic\" != \"$magic\"; then
# Run the actual program with our arguments.
func_exec_program \${1+\"\$@\"}
fi
else
# The program doesn't exist.
\$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
\$ECHO \"This script is just a wrapper for \$program.\" 1>&2
\$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
exit 1
fi
fi\
"
}
# func_emit_cwrapperexe_src
# emit the source code for a wrapper executable on stdout
# Must ONLY be called from within func_mode_link because
# it depends on a number of variable set therein.
func_emit_cwrapperexe_src ()
{
cat <
#include
#ifdef _MSC_VER
# include
# include
# include
#else
# include
# include
# ifdef __CYGWIN__
# include
# endif
#endif
#include
#include
#include
#include
#include
#include
#include
#include
#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
/* declarations of non-ANSI functions */
#if defined __MINGW32__
# ifdef __STRICT_ANSI__
int _putenv (const char *);
# endif
#elif defined __CYGWIN__
# ifdef __STRICT_ANSI__
char *realpath (const char *, char *);
int putenv (char *);
int setenv (const char *, const char *, int);
# endif
/* #elif defined other_platform || defined ... */
#endif
/* portability defines, excluding path handling macros */
#if defined _MSC_VER
# define setmode _setmode
# define stat _stat
# define chmod _chmod
# define getcwd _getcwd
# define putenv _putenv
# define S_IXUSR _S_IEXEC
#elif defined __MINGW32__
# define setmode _setmode
# define stat _stat
# define chmod _chmod
# define getcwd _getcwd
# define putenv _putenv
#elif defined __CYGWIN__
# define HAVE_SETENV
# define FOPEN_WB "wb"
/* #elif defined other platforms ... */
#endif
#if defined PATH_MAX
# define LT_PATHMAX PATH_MAX
#elif defined MAXPATHLEN
# define LT_PATHMAX MAXPATHLEN
#else
# define LT_PATHMAX 1024
#endif
#ifndef S_IXOTH
# define S_IXOTH 0
#endif
#ifndef S_IXGRP
# define S_IXGRP 0
#endif
/* path handling portability macros */
#ifndef DIR_SEPARATOR
# define DIR_SEPARATOR '/'
# define PATH_SEPARATOR ':'
#endif
#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
defined __OS2__
# define HAVE_DOS_BASED_FILE_SYSTEM
# define FOPEN_WB "wb"
# ifndef DIR_SEPARATOR_2
# define DIR_SEPARATOR_2 '\\'
# endif
# ifndef PATH_SEPARATOR_2
# define PATH_SEPARATOR_2 ';'
# endif
#endif
#ifndef DIR_SEPARATOR_2
# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
#else /* DIR_SEPARATOR_2 */
# define IS_DIR_SEPARATOR(ch) \
(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
#endif /* DIR_SEPARATOR_2 */
#ifndef PATH_SEPARATOR_2
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
#else /* PATH_SEPARATOR_2 */
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
#endif /* PATH_SEPARATOR_2 */
#ifndef FOPEN_WB
# define FOPEN_WB "w"
#endif
#ifndef _O_BINARY
# define _O_BINARY 0
#endif
#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
#define XFREE(stale) do { \
if (stale) { free (stale); stale = 0; } \
} while (0)
#if defined LT_DEBUGWRAPPER
static int lt_debug = 1;
#else
static int lt_debug = 0;
#endif
const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
void *xmalloc (size_t num);
char *xstrdup (const char *string);
const char *base_name (const char *name);
char *find_executable (const char *wrapper);
char *chase_symlinks (const char *pathspec);
int make_executable (const char *path);
int check_executable (const char *path);
char *strendzap (char *str, const char *pat);
void lt_debugprintf (const char *file, int line, const char *fmt, ...);
void lt_fatal (const char *file, int line, const char *message, ...);
static const char *nonnull (const char *s);
static const char *nonempty (const char *s);
void lt_setenv (const char *name, const char *value);
char *lt_extend_str (const char *orig_value, const char *add, int to_end);
void lt_update_exe_path (const char *name, const char *value);
void lt_update_lib_path (const char *name, const char *value);
char **prepare_spawn (char **argv);
void lt_dump_script (FILE *f);
EOF
cat <= 0)
&& (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
return 1;
else
return 0;
}
int
make_executable (const char *path)
{
int rval = 0;
struct stat st;
lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
nonempty (path));
if ((!path) || (!*path))
return 0;
if (stat (path, &st) >= 0)
{
rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
}
return rval;
}
/* Searches for the full path of the wrapper. Returns
newly allocated full path name if found, NULL otherwise
Does not chase symlinks, even on platforms that support them.
*/
char *
find_executable (const char *wrapper)
{
int has_slash = 0;
const char *p;
const char *p_next;
/* static buffer for getcwd */
char tmp[LT_PATHMAX + 1];
size_t tmp_len;
char *concat_name;
lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
nonempty (wrapper));
if ((wrapper == NULL) || (*wrapper == '\0'))
return NULL;
/* Absolute path? */
#if defined HAVE_DOS_BASED_FILE_SYSTEM
if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
{
concat_name = xstrdup (wrapper);
if (check_executable (concat_name))
return concat_name;
XFREE (concat_name);
}
else
{
#endif
if (IS_DIR_SEPARATOR (wrapper[0]))
{
concat_name = xstrdup (wrapper);
if (check_executable (concat_name))
return concat_name;
XFREE (concat_name);
}
#if defined HAVE_DOS_BASED_FILE_SYSTEM
}
#endif
for (p = wrapper; *p; p++)
if (*p == '/')
{
has_slash = 1;
break;
}
if (!has_slash)
{
/* no slashes; search PATH */
const char *path = getenv ("PATH");
if (path != NULL)
{
for (p = path; *p; p = p_next)
{
const char *q;
size_t p_len;
for (q = p; *q; q++)
if (IS_PATH_SEPARATOR (*q))
break;
p_len = (size_t) (q - p);
p_next = (*q == '\0' ? q : q + 1);
if (p_len == 0)
{
/* empty path: current directory */
if (getcwd (tmp, LT_PATHMAX) == NULL)
lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
nonnull (strerror (errno)));
tmp_len = strlen (tmp);
concat_name =
XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
memcpy (concat_name, tmp, tmp_len);
concat_name[tmp_len] = '/';
strcpy (concat_name + tmp_len + 1, wrapper);
}
else
{
concat_name =
XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
memcpy (concat_name, p, p_len);
concat_name[p_len] = '/';
strcpy (concat_name + p_len + 1, wrapper);
}
if (check_executable (concat_name))
return concat_name;
XFREE (concat_name);
}
}
/* not found in PATH; assume curdir */
}
/* Relative path | not found in path: prepend cwd */
if (getcwd (tmp, LT_PATHMAX) == NULL)
lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
nonnull (strerror (errno)));
tmp_len = strlen (tmp);
concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
memcpy (concat_name, tmp, tmp_len);
concat_name[tmp_len] = '/';
strcpy (concat_name + tmp_len + 1, wrapper);
if (check_executable (concat_name))
return concat_name;
XFREE (concat_name);
return NULL;
}
char *
chase_symlinks (const char *pathspec)
{
#ifndef S_ISLNK
return xstrdup (pathspec);
#else
char buf[LT_PATHMAX];
struct stat s;
char *tmp_pathspec = xstrdup (pathspec);
char *p;
int has_symlinks = 0;
while (strlen (tmp_pathspec) && !has_symlinks)
{
lt_debugprintf (__FILE__, __LINE__,
"checking path component for symlinks: %s\n",
tmp_pathspec);
if (lstat (tmp_pathspec, &s) == 0)
{
if (S_ISLNK (s.st_mode) != 0)
{
has_symlinks = 1;
break;
}
/* search backwards for last DIR_SEPARATOR */
p = tmp_pathspec + strlen (tmp_pathspec) - 1;
while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
p--;
if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
{
/* no more DIR_SEPARATORS left */
break;
}
*p = '\0';
}
else
{
lt_fatal (__FILE__, __LINE__,
"error accessing file \"%s\": %s",
tmp_pathspec, nonnull (strerror (errno)));
}
}
XFREE (tmp_pathspec);
if (!has_symlinks)
{
return xstrdup (pathspec);
}
tmp_pathspec = realpath (pathspec, buf);
if (tmp_pathspec == 0)
{
lt_fatal (__FILE__, __LINE__,
"could not follow symlinks for %s", pathspec);
}
return xstrdup (tmp_pathspec);
#endif
}
char *
strendzap (char *str, const char *pat)
{
size_t len, patlen;
assert (str != NULL);
assert (pat != NULL);
len = strlen (str);
patlen = strlen (pat);
if (patlen <= len)
{
str += len - patlen;
if (STREQ (str, pat))
*str = '\0';
}
return str;
}
void
lt_debugprintf (const char *file, int line, const char *fmt, ...)
{
va_list args;
if (lt_debug)
{
(void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
va_start (args, fmt);
(void) vfprintf (stderr, fmt, args);
va_end (args);
}
}
static void
lt_error_core (int exit_status, const char *file,
int line, const char *mode,
const char *message, va_list ap)
{
fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
vfprintf (stderr, message, ap);
fprintf (stderr, ".\n");
if (exit_status >= 0)
exit (exit_status);
}
void
lt_fatal (const char *file, int line, const char *message, ...)
{
va_list ap;
va_start (ap, message);
lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
va_end (ap);
}
static const char *
nonnull (const char *s)
{
return s ? s : "(null)";
}
static const char *
nonempty (const char *s)
{
return (s && !*s) ? "(empty)" : nonnull (s);
}
void
lt_setenv (const char *name, const char *value)
{
lt_debugprintf (__FILE__, __LINE__,
"(lt_setenv) setting '%s' to '%s'\n",
nonnull (name), nonnull (value));
{
#ifdef HAVE_SETENV
/* always make a copy, for consistency with !HAVE_SETENV */
char *str = xstrdup (value);
setenv (name, str, 1);
#else
size_t len = strlen (name) + 1 + strlen (value) + 1;
char *str = XMALLOC (char, len);
sprintf (str, "%s=%s", name, value);
if (putenv (str) != EXIT_SUCCESS)
{
XFREE (str);
}
#endif
}
}
char *
lt_extend_str (const char *orig_value, const char *add, int to_end)
{
char *new_value;
if (orig_value && *orig_value)
{
size_t orig_value_len = strlen (orig_value);
size_t add_len = strlen (add);
new_value = XMALLOC (char, add_len + orig_value_len + 1);
if (to_end)
{
strcpy (new_value, orig_value);
strcpy (new_value + orig_value_len, add);
}
else
{
strcpy (new_value, add);
strcpy (new_value + add_len, orig_value);
}
}
else
{
new_value = xstrdup (add);
}
return new_value;
}
void
lt_update_exe_path (const char *name, const char *value)
{
lt_debugprintf (__FILE__, __LINE__,
"(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
nonnull (name), nonnull (value));
if (name && *name && value && *value)
{
char *new_value = lt_extend_str (getenv (name), value, 0);
/* some systems can't cope with a ':'-terminated path #' */
size_t len = strlen (new_value);
while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
{
new_value[--len] = '\0';
}
lt_setenv (name, new_value);
XFREE (new_value);
}
}
void
lt_update_lib_path (const char *name, const char *value)
{
lt_debugprintf (__FILE__, __LINE__,
"(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
nonnull (name), nonnull (value));
if (name && *name && value && *value)
{
char *new_value = lt_extend_str (getenv (name), value, 0);
lt_setenv (name, new_value);
XFREE (new_value);
}
}
EOF
case $host_os in
mingw*)
cat <<"EOF"
/* Prepares an argument vector before calling spawn().
Note that spawn() does not by itself call the command interpreter
(getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
GetVersionEx(&v);
v.dwPlatformId == VER_PLATFORM_WIN32_NT;
}) ? "cmd.exe" : "command.com").
Instead it simply concatenates the arguments, separated by ' ', and calls
CreateProcess(). We must quote the arguments since Win32 CreateProcess()
interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
special way:
- Space and tab are interpreted as delimiters. They are not treated as
delimiters if they are surrounded by double quotes: "...".
- Unescaped double quotes are removed from the input. Their only effect is
that within double quotes, space and tab are treated like normal
characters.
- Backslashes not followed by double quotes are not special.
- But 2*n+1 backslashes followed by a double quote become
n backslashes followed by a double quote (n >= 0):
\" -> "
\\\" -> \"
\\\\\" -> \\"
*/
#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
char **
prepare_spawn (char **argv)
{
size_t argc;
char **new_argv;
size_t i;
/* Count number of arguments. */
for (argc = 0; argv[argc] != NULL; argc++)
;
/* Allocate new argument vector. */
new_argv = XMALLOC (char *, argc + 1);
/* Put quoted arguments into the new argument vector. */
for (i = 0; i < argc; i++)
{
const char *string = argv[i];
if (string[0] == '\0')
new_argv[i] = xstrdup ("\"\"");
else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
{
int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
size_t length;
unsigned int backslashes;
const char *s;
char *quoted_string;
char *p;
length = 0;
backslashes = 0;
if (quote_around)
length++;
for (s = string; *s != '\0'; s++)
{
char c = *s;
if (c == '"')
length += backslashes + 1;
length++;
if (c == '\\')
backslashes++;
else
backslashes = 0;
}
if (quote_around)
length += backslashes + 1;
quoted_string = XMALLOC (char, length + 1);
p = quoted_string;
backslashes = 0;
if (quote_around)
*p++ = '"';
for (s = string; *s != '\0'; s++)
{
char c = *s;
if (c == '"')
{
unsigned int j;
for (j = backslashes + 1; j > 0; j--)
*p++ = '\\';
}
*p++ = c;
if (c == '\\')
backslashes++;
else
backslashes = 0;
}
if (quote_around)
{
unsigned int j;
for (j = backslashes; j > 0; j--)
*p++ = '\\';
*p++ = '"';
}
*p = '\0';
new_argv[i] = quoted_string;
}
else
new_argv[i] = (char *) string;
}
new_argv[argc] = NULL;
return new_argv;
}
EOF
;;
esac
cat <<"EOF"
void lt_dump_script (FILE* f)
{
EOF
func_emit_wrapper yes |
$SED -n -e '
s/^\(.\{79\}\)\(..*\)/\1\
\2/
h
s/\([\\"]\)/\\\1/g
s/$/\\n/
s/\([^\n]*\).*/ fputs ("\1", f);/p
g
D'
cat <<"EOF"
}
EOF
}
# end: func_emit_cwrapperexe_src
# func_win32_import_lib_p ARG
# True if ARG is an import lib, as indicated by $file_magic_cmd
func_win32_import_lib_p ()
{
$debug_cmd
case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
*import*) : ;;
*) false ;;
esac
}
# func_suncc_cstd_abi
# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
# Several compiler flags select an ABI that is incompatible with the
# Cstd library. Avoid specifying it if any are in CXXFLAGS.
func_suncc_cstd_abi ()
{
$debug_cmd
case " $compile_command " in
*" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*)
suncc_use_cstd_abi=no
;;
*)
suncc_use_cstd_abi=yes
;;
esac
}
# func_mode_link arg...
func_mode_link ()
{
$debug_cmd
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
# It is impossible to link a dll without this setting, and
# we shouldn't force the makefile maintainer to figure out
# what system we are compiling for in order to pass an extra
# flag for every libtool invocation.
# allow_undefined=no
# FIXME: Unfortunately, there are problems with the above when trying
# to make a dll that has undefined symbols, in which case not
# even a static library is built. For now, we need to specify
# -no-undefined on the libtool link line when we can be certain
# that all symbols are satisfied, otherwise we get a static library.
allow_undefined=yes
;;
*)
allow_undefined=yes
;;
esac
libtool_args=$nonopt
base_compile="$nonopt $@"
compile_command=$nonopt
finalize_command=$nonopt
compile_rpath=
finalize_rpath=
compile_shlibpath=
finalize_shlibpath=
convenience=
old_convenience=
deplibs=
old_deplibs=
compiler_flags=
linker_flags=
dllsearchpath=
lib_search_path=`pwd`
inst_prefix_dir=
new_inherited_linker_flags=
avoid_version=no
bindir=
dlfiles=
dlprefiles=
dlself=no
export_dynamic=no
export_symbols=
export_symbols_regex=
generated=
libobjs=
ltlibs=
module=no
no_install=no
objs=
os2dllname=
non_pic_objects=
precious_files_regex=
prefer_static_libs=no
preload=false
prev=
prevarg=
release=
rpath=
xrpath=
perm_rpath=
temp_rpath=
thread_safe=no
vinfo=
vinfo_number=no
weak_libs=
single_module=$wl-single_module
func_infer_tag $base_compile
# We need to know -static, to get the right output filenames.
for arg
do
case $arg in
-shared)
test yes != "$build_libtool_libs" \
&& func_fatal_configuration "cannot build a shared library"
build_old_libs=no
break
;;
-all-static | -static | -static-libtool-libs)
case $arg in
-all-static)
if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then
func_warning "complete static linking is impossible in this configuration"
fi
if test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=yes
;;
-static)
if test -z "$pic_flag" && test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=built
;;
-static-libtool-libs)
if test -z "$pic_flag" && test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=yes
;;
esac
build_libtool_libs=no
build_old_libs=yes
break
;;
esac
done
# See if our shared archives depend on static archives.
test -n "$old_archive_from_new_cmds" && build_old_libs=yes
# Go through the arguments, transforming them on the way.
while test "$#" -gt 0; do
arg=$1
shift
func_quote_arg pretty,unquoted "$arg"
qarg=$func_quote_arg_unquoted_result
func_append libtool_args " $func_quote_arg_result"
# If the previous option needs an argument, assign it.
if test -n "$prev"; then
case $prev in
output)
func_append compile_command " @OUTPUT@"
func_append finalize_command " @OUTPUT@"
;;
esac
case $prev in
bindir)
bindir=$arg
prev=
continue
;;
dlfiles|dlprefiles)
$preload || {
# Add the symbol object into the linking commands.
func_append compile_command " @SYMFILE@"
func_append finalize_command " @SYMFILE@"
preload=:
}
case $arg in
*.la | *.lo) ;; # We handle these cases below.
force)
if test no = "$dlself"; then
dlself=needless
export_dynamic=yes
fi
prev=
continue
;;
self)
if test dlprefiles = "$prev"; then
dlself=yes
elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
dlself=yes
else
dlself=needless
export_dynamic=yes
fi
prev=
continue
;;
*)
if test dlfiles = "$prev"; then
func_append dlfiles " $arg"
else
func_append dlprefiles " $arg"
fi
prev=
continue
;;
esac
;;
expsyms)
export_symbols=$arg
test -f "$arg" \
|| func_fatal_error "symbol file '$arg' does not exist"
prev=
continue
;;
expsyms_regex)
export_symbols_regex=$arg
prev=
continue
;;
framework)
case $host in
*-*-darwin*)
case "$deplibs " in
*" $qarg.ltframework "*) ;;
*) func_append deplibs " $qarg.ltframework" # this is fixed later
;;
esac
;;
esac
prev=
continue
;;
inst_prefix)
inst_prefix_dir=$arg
prev=
continue
;;
mllvm)
# Clang does not use LLVM to link, so we can simply discard any
# '-mllvm $arg' options when doing the link step.
prev=
continue
;;
objectlist)
if test -f "$arg"; then
save_arg=$arg
moreargs=
for fil in `cat "$save_arg"`
do
# func_append moreargs " $fil"
arg=$fil
# A libtool-controlled object.
# Check to see that this really is a libtool object.
if func_lalib_unsafe_p "$arg"; then
pic_object=
non_pic_object=
# Read the .lo file
func_source "$arg"
if test -z "$pic_object" ||
test -z "$non_pic_object" ||
test none = "$pic_object" &&
test none = "$non_pic_object"; then
func_fatal_error "cannot find name of object for '$arg'"
fi
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
xdir=$func_dirname_result
if test none != "$pic_object"; then
# Prepend the subdirectory the object is found in.
pic_object=$xdir$pic_object
if test dlfiles = "$prev"; then
if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
func_append dlfiles " $pic_object"
prev=
continue
else
# If libtool objects are unsupported, then we need to preload.
prev=dlprefiles
fi
fi
# CHECK ME: I think I busted this. -Ossama
if test dlprefiles = "$prev"; then
# Preload the old-style object.
func_append dlprefiles " $pic_object"
prev=
fi
# A PIC object.
func_append libobjs " $pic_object"
arg=$pic_object
fi
# Non-PIC object.
if test none != "$non_pic_object"; then
# Prepend the subdirectory the object is found in.
non_pic_object=$xdir$non_pic_object
# A standard non-PIC object
func_append non_pic_objects " $non_pic_object"
if test -z "$pic_object" || test none = "$pic_object"; then
arg=$non_pic_object
fi
else
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
non_pic_object=$pic_object
func_append non_pic_objects " $non_pic_object"
fi
else
# Only an error if not doing a dry-run.
if $opt_dry_run; then
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
xdir=$func_dirname_result
func_lo2o "$arg"
pic_object=$xdir$objdir/$func_lo2o_result
non_pic_object=$xdir$func_lo2o_result
func_append libobjs " $pic_object"
func_append non_pic_objects " $non_pic_object"
else
func_fatal_error "'$arg' is not a valid libtool object"
fi
fi
done
else
func_fatal_error "link input file '$arg' does not exist"
fi
arg=$save_arg
prev=
continue
;;
os2dllname)
os2dllname=$arg
prev=
continue
;;
precious_regex)
precious_files_regex=$arg
prev=
continue
;;
release)
release=-$arg
prev=
continue
;;
rpath | xrpath)
# We need an absolute path.
case $arg in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
func_fatal_error "only absolute run-paths are allowed"
;;
esac
if test rpath = "$prev"; then
case "$rpath " in
*" $arg "*) ;;
*) func_append rpath " $arg" ;;
esac
else
case "$xrpath " in
*" $arg "*) ;;
*) func_append xrpath " $arg" ;;
esac
fi
prev=
continue
;;
shrext)
shrext_cmds=$arg
prev=
continue
;;
weak)
func_append weak_libs " $arg"
prev=
continue
;;
xassembler)
func_append compiler_flags " -Xassembler $qarg"
prev=
func_append compile_command " -Xassembler $qarg"
func_append finalize_command " -Xassembler $qarg"
continue
;;
xcclinker)
func_append linker_flags " $qarg"
func_append compiler_flags " $qarg"
prev=
func_append compile_command " $qarg"
func_append finalize_command " $qarg"
continue
;;
xcompiler)
func_append compiler_flags " $qarg"
prev=
func_append compile_command " $qarg"
func_append finalize_command " $qarg"
continue
;;
xlinker)
func_append linker_flags " $qarg"
func_append compiler_flags " $wl$qarg"
prev=
func_append compile_command " $wl$qarg"
func_append finalize_command " $wl$qarg"
continue
;;
*)
eval "$prev=\"\$arg\""
prev=
continue
;;
esac
fi # test -n "$prev"
prevarg=$arg
case $arg in
-all-static)
if test -n "$link_static_flag"; then
# See comment for -static flag below, for more details.
func_append compile_command " $link_static_flag"
func_append finalize_command " $link_static_flag"
fi
continue
;;
-allow-undefined)
# FIXME: remove this flag sometime in the future.
func_fatal_error "'-allow-undefined' must not be used because it is the default"
;;
-avoid-version)
avoid_version=yes
continue
;;
-bindir)
prev=bindir
continue
;;
-dlopen)
prev=dlfiles
continue
;;
-dlpreopen)
prev=dlprefiles
continue
;;
-export-dynamic)
export_dynamic=yes
continue
;;
-export-symbols | -export-symbols-regex)
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
func_fatal_error "more than one -exported-symbols argument is not allowed"
fi
if test X-export-symbols = "X$arg"; then
prev=expsyms
else
prev=expsyms_regex
fi
continue
;;
-framework)
prev=framework
continue
;;
-inst-prefix-dir)
prev=inst_prefix
continue
;;
# The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
# so, if we see these flags be careful not to treat them like -L
-L[A-Z][A-Z]*:*)
case $with_gcc/$host in
no/*-*-irix* | /*-*-irix*)
func_append compile_command " $arg"
func_append finalize_command " $arg"
;;
esac
continue
;;
-L*)
func_stripname "-L" '' "$arg"
if test -z "$func_stripname_result"; then
if test "$#" -gt 0; then
func_fatal_error "require no space between '-L' and '$1'"
else
func_fatal_error "need path for '-L' option"
fi
fi
func_resolve_sysroot "$func_stripname_result"
dir=$func_resolve_sysroot_result
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
absdir=`cd "$dir" && pwd`
test -z "$absdir" && \
func_fatal_error "cannot determine absolute directory name of '$dir'"
dir=$absdir
;;
esac
case "$deplibs " in
*" -L$dir "* | *" $arg "*)
# Will only happen for absolute or sysroot arguments
;;
*)
# Preserve sysroot, but never include relative directories
case $dir in
[\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
*) func_append deplibs " -L$dir" ;;
esac
func_append lib_search_path " $dir"
;;
esac
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$dir:"*) ;;
::) dllsearchpath=$dir;;
*) func_append dllsearchpath ":$dir";;
esac
case :$dllsearchpath: in
*":$testbindir:"*) ;;
::) dllsearchpath=$testbindir;;
*) func_append dllsearchpath ":$testbindir";;
esac
;;
esac
continue
;;
-l*)
if test X-lc = "X$arg" || test X-lm = "X$arg"; then
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
# These systems don't actually have a C or math library (as such)
continue
;;
*-*-os2*)
# These systems don't actually have a C library (as such)
test X-lc = "X$arg" && continue
;;
*-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig* | *-*-midnightbsd*)
# Do not include libc due to us having libc/libc_r.
test X-lc = "X$arg" && continue
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C and math libraries are in the System framework
func_append deplibs " System.ltframework"
continue
;;
*-*-sco3.2v5* | *-*-sco5v6*)
# Causes problems with __ctype
test X-lc = "X$arg" && continue
;;
*-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
# Compiler inserts libc in the correct place for threads to work
test X-lc = "X$arg" && continue
;;
esac
elif test X-lc_r = "X$arg"; then
case $host in
*-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig* | *-*-midnightbsd*)
# Do not include libc_r directly, use -pthread flag.
continue
;;
esac
fi
func_append deplibs " $arg"
continue
;;
-mllvm)
prev=mllvm
continue
;;
-module)
module=yes
continue
;;
# Tru64 UNIX uses -model [arg] to determine the layout of C++
# classes, name mangling, and exception handling.
# Darwin uses the -arch flag to determine output architecture.
-model|-arch|-isysroot|--sysroot)
func_append compiler_flags " $arg"
func_append compile_command " $arg"
func_append finalize_command " $arg"
prev=xcompiler
continue
;;
# Solaris ld rejects as of 11.4. Refer to Oracle bug 22985199.
-pthread)
case $host in
*solaris2*) ;;
*)
case "$new_inherited_linker_flags " in
*" $arg "*) ;;
* ) func_append new_inherited_linker_flags " $arg" ;;
esac
;;
esac
continue
;;
-mt|-mthreads|-kthread|-Kthread|-pthreads|--thread-safe \
|-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
func_append compiler_flags " $arg"
func_append compile_command " $arg"
func_append finalize_command " $arg"
case "$new_inherited_linker_flags " in
*" $arg "*) ;;
* ) func_append new_inherited_linker_flags " $arg" ;;
esac
continue
;;
-multi_module)
single_module=$wl-multi_module
continue
;;
-no-fast-install)
fast_install=no
continue
;;
-no-install)
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
# The PATH hackery in wrapper scripts is required on Windows
# and Darwin in order for the loader to find any dlls it needs.
func_warning "'-no-install' is ignored for $host"
func_warning "assuming '-no-fast-install' instead"
fast_install=no
;;
*) no_install=yes ;;
esac
continue
;;
-no-undefined)
allow_undefined=no
continue
;;
-objectlist)
prev=objectlist
continue
;;
-os2dllname)
prev=os2dllname
continue
;;
-o) prev=output ;;
-precious-files-regex)
prev=precious_regex
continue
;;
-release)
prev=release
continue
;;
-rpath)
prev=rpath
continue
;;
-R)
prev=xrpath
continue
;;
-R*)
func_stripname '-R' '' "$arg"
dir=$func_stripname_result
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
=*)
func_stripname '=' '' "$dir"
dir=$lt_sysroot$func_stripname_result
;;
*)
func_fatal_error "only absolute run-paths are allowed"
;;
esac
case "$xrpath " in
*" $dir "*) ;;
*) func_append xrpath " $dir" ;;
esac
continue
;;
-shared)
# The effects of -shared are defined in a previous loop.
continue
;;
-shrext)
prev=shrext
continue
;;
-static | -static-libtool-libs)
# The effects of -static are defined in a previous loop.
# We used to do the same as -all-static on platforms that
# didn't have a PIC flag, but the assumption that the effects
# would be equivalent was wrong. It would break on at least
# Digital Unix and AIX.
continue
;;
-thread-safe)
thread_safe=yes
continue
;;
-version-info)
prev=vinfo
continue
;;
-version-number)
prev=vinfo
vinfo_number=yes
continue
;;
-weak)
prev=weak
continue
;;
-Wc,*)
func_stripname '-Wc,' '' "$arg"
args=$func_stripname_result
arg=
save_ifs=$IFS; IFS=,
for flag in $args; do
IFS=$save_ifs
func_quote_arg pretty "$flag"
func_append arg " $func_quote_arg_result"
func_append compiler_flags " $func_quote_arg_result"
done
IFS=$save_ifs
func_stripname ' ' '' "$arg"
arg=$func_stripname_result
;;
-Wl,*)
func_stripname '-Wl,' '' "$arg"
args=$func_stripname_result
arg=
save_ifs=$IFS; IFS=,
for flag in $args; do
IFS=$save_ifs
func_quote_arg pretty "$flag"
func_append arg " $wl$func_quote_arg_result"
func_append compiler_flags " $wl$func_quote_arg_result"
func_append linker_flags " $func_quote_arg_result"
done
IFS=$save_ifs
func_stripname ' ' '' "$arg"
arg=$func_stripname_result
;;
-Xassembler)
prev=xassembler
continue
;;
-Xcompiler)
prev=xcompiler
continue
;;
-Xlinker)
prev=xlinker
continue
;;
-XCClinker)
prev=xcclinker
continue
;;
# -msg_* for osf cc
-msg_*)
func_quote_arg pretty "$arg"
arg=$func_quote_arg_result
;;
# Flags to be passed through unchanged, with rationale:
# -64, -mips[0-9] enable 64-bit mode for the SGI compiler
# -r[0-9][0-9]* specify processor for the SGI compiler
# -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
# +DA*, +DD* enable 64-bit mode for the HP compiler
# -q* compiler args for the IBM compiler
# -m*, -t[45]*, -txscale* architecture-specific flags for GCC
# -F/path path to uninstalled frameworks, gcc on darwin
# -p, -pg, --coverage, -fprofile-* profiling flags for GCC
# -fstack-protector* stack protector flags for GCC
# @file GCC response files
# -tp=* Portland pgcc target processor selection
# --sysroot=* for sysroot support
# -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
# -specs=* GCC specs files
# -stdlib=* select c++ std lib with clang
# -fsanitize=* Clang/GCC memory and address sanitizer
# -fuse-ld=* Linker select flags for GCC
# -Wa,* Pass flags directly to the assembler
-64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
-O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*| \
-specs=*|-fsanitize=*|-fuse-ld=*|-Wa,*)
func_quote_arg pretty "$arg"
arg=$func_quote_arg_result
func_append compile_command " $arg"
func_append finalize_command " $arg"
func_append compiler_flags " $arg"
continue
;;
-Z*)
if test os2 = "`expr $host : '.*\(os2\)'`"; then
# OS/2 uses -Zxxx to specify OS/2-specific options
compiler_flags="$compiler_flags $arg"
func_append compile_command " $arg"
func_append finalize_command " $arg"
case $arg in
-Zlinker | -Zstack)
prev=xcompiler
;;
esac
continue
else
# Otherwise treat like 'Some other compiler flag' below
func_quote_arg pretty "$arg"
arg=$func_quote_arg_result
fi
;;
# Some other compiler flag.
-* | +*)
func_quote_arg pretty "$arg"
arg=$func_quote_arg_result
;;
*.$objext)
# A standard object.
func_append objs " $arg"
;;
*.lo)
# A libtool-controlled object.
# Check to see that this really is a libtool object.
if func_lalib_unsafe_p "$arg"; then
pic_object=
non_pic_object=
# Read the .lo file
func_source "$arg"
if test -z "$pic_object" ||
test -z "$non_pic_object" ||
test none = "$pic_object" &&
test none = "$non_pic_object"; then
func_fatal_error "cannot find name of object for '$arg'"
fi
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
xdir=$func_dirname_result
test none = "$pic_object" || {
# Prepend the subdirectory the object is found in.
pic_object=$xdir$pic_object
if test dlfiles = "$prev"; then
if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
func_append dlfiles " $pic_object"
prev=
continue
else
# If libtool objects are unsupported, then we need to preload.
prev=dlprefiles
fi
fi
# CHECK ME: I think I busted this. -Ossama
if test dlprefiles = "$prev"; then
# Preload the old-style object.
func_append dlprefiles " $pic_object"
prev=
fi
# A PIC object.
func_append libobjs " $pic_object"
arg=$pic_object
}
# Non-PIC object.
if test none != "$non_pic_object"; then
# Prepend the subdirectory the object is found in.
non_pic_object=$xdir$non_pic_object
# A standard non-PIC object
func_append non_pic_objects " $non_pic_object"
if test -z "$pic_object" || test none = "$pic_object"; then
arg=$non_pic_object
fi
else
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
non_pic_object=$pic_object
func_append non_pic_objects " $non_pic_object"
fi
else
# Only an error if not doing a dry-run.
if $opt_dry_run; then
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
xdir=$func_dirname_result
func_lo2o "$arg"
pic_object=$xdir$objdir/$func_lo2o_result
non_pic_object=$xdir$func_lo2o_result
func_append libobjs " $pic_object"
func_append non_pic_objects " $non_pic_object"
else
func_fatal_error "'$arg' is not a valid libtool object"
fi
fi
;;
*.$libext)
# An archive.
func_append deplibs " $arg"
func_append old_deplibs " $arg"
continue
;;
*.la)
# A libtool-controlled library.
func_resolve_sysroot "$arg"
if test dlfiles = "$prev"; then
# This library was specified with -dlopen.
func_append dlfiles " $func_resolve_sysroot_result"
prev=
elif test dlprefiles = "$prev"; then
# The library was specified with -dlpreopen.
func_append dlprefiles " $func_resolve_sysroot_result"
prev=
else
func_append deplibs " $func_resolve_sysroot_result"
fi
continue
;;
# Some other compiler argument.
*)
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
func_quote_arg pretty "$arg"
arg=$func_quote_arg_result
;;
esac # arg
# Now actually substitute the argument into the commands.
if test -n "$arg"; then
func_append compile_command " $arg"
func_append finalize_command " $arg"
fi
done # argument parsing loop
test -n "$prev" && \
func_fatal_help "the '$prevarg' option requires an argument"
if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then
eval arg=\"$export_dynamic_flag_spec\"
func_append compile_command " $arg"
func_append finalize_command " $arg"
fi
oldlibs=
# calculate the name of the file, without its directory
func_basename "$output"
outputname=$func_basename_result
libobjs_save=$libobjs
if test -n "$shlibpath_var"; then
# get the directories listed in $shlibpath_var
eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
else
shlib_search_path=
fi
eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
# Definition is injected by LT_CONFIG during libtool generation.
func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"
func_dirname "$output" "/" ""
output_objdir=$func_dirname_result$objdir
func_to_tool_file "$output_objdir/"
tool_output_objdir=$func_to_tool_file_result
# Create the object directory.
func_mkdir_p "$output_objdir"
# Determine the type of output
case $output in
"")
func_fatal_help "you must specify an output file"
;;
*.$libext) linkmode=oldlib ;;
*.lo | *.$objext) linkmode=obj ;;
*.la) linkmode=lib ;;
*) linkmode=prog ;; # Anything else should be a program.
esac
specialdeplibs=
libs=
# Find all interdependent deplibs by searching for libraries
# that are linked more than once (e.g. -la -lb -la)
for deplib in $deplibs; do
if $opt_preserve_dup_deps; then
case "$libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
func_append libs " $deplib"
done
if test lib = "$linkmode"; then
libs="$predeps $libs $compiler_lib_search_path $postdeps"
# Compute libraries that are listed more than once in $predeps
# $postdeps and mark them as special (i.e., whose duplicates are
# not to be eliminated).
pre_post_deps=
if $opt_duplicate_compiler_generated_deps; then
for pre_post_dep in $predeps $postdeps; do
case "$pre_post_deps " in
*" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
esac
func_append pre_post_deps " $pre_post_dep"
done
fi
pre_post_deps=
fi
deplibs=
newdependency_libs=
newlib_search_path=
need_relink=no # whether we're linking any uninstalled libtool libraries
notinst_deplibs= # not-installed libtool libraries
notinst_path= # paths that contain not-installed libtool libraries
case $linkmode in
lib)
passes="conv dlpreopen link"
for file in $dlfiles $dlprefiles; do
case $file in
*.la) ;;
*)
func_fatal_help "libraries can '-dlopen' only libtool libraries: $file"
;;
esac
done
;;
prog)
compile_deplibs=
finalize_deplibs=
alldeplibs=false
newdlfiles=
newdlprefiles=
passes="conv scan dlopen dlpreopen link"
;;
*) passes="conv"
;;
esac
for pass in $passes; do
# The preopen pass in lib mode reverses $deplibs; put it back here
# so that -L comes before libs that need it for instance...
if test lib,link = "$linkmode,$pass"; then
## FIXME: Find the place where the list is rebuilt in the wrong
## order, and fix it there properly
tmp_deplibs=
for deplib in $deplibs; do
tmp_deplibs="$deplib $tmp_deplibs"
done
deplibs=$tmp_deplibs
fi
if test lib,link = "$linkmode,$pass" ||
test prog,scan = "$linkmode,$pass"; then
libs=$deplibs
deplibs=
fi
if test prog = "$linkmode"; then
case $pass in
dlopen) libs=$dlfiles ;;
dlpreopen) libs=$dlprefiles ;;
link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
esac
fi
if test lib,dlpreopen = "$linkmode,$pass"; then
# Collect and forward deplibs of preopened libtool libs
for lib in $dlprefiles; do
# Ignore non-libtool-libs
dependency_libs=
func_resolve_sysroot "$lib"
case $lib in
*.la) func_source "$func_resolve_sysroot_result" ;;
esac
# Collect preopened libtool deplibs, except any this library
# has declared as weak libs
for deplib in $dependency_libs; do
func_basename "$deplib"
deplib_base=$func_basename_result
case " $weak_libs " in
*" $deplib_base "*) ;;
*) func_append deplibs " $deplib" ;;
esac
done
done
libs=$dlprefiles
fi
if test dlopen = "$pass"; then
# Collect dlpreopened libraries
save_deplibs=$deplibs
deplibs=
fi
for deplib in $libs; do
lib=
found=false
case $deplib in
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
|-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
func_append compiler_flags " $deplib"
if test lib = "$linkmode"; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
* ) func_append new_inherited_linker_flags " $deplib" ;;
esac
fi
fi
continue
;;
-l*)
if test lib != "$linkmode" && test prog != "$linkmode"; then
func_warning "'-l' is ignored for archives/objects"
continue
fi
func_stripname '-l' '' "$deplib"
name=$func_stripname_result
if test lib = "$linkmode"; then
searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
else
searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
fi
for searchdir in $searchdirs; do
for search_ext in .la $std_shrext .so .a; do
# Search the libtool library
lib=$searchdir/lib$name$search_ext
if test -f "$lib"; then
if test .la = "$search_ext"; then
found=:
else
found=false
fi
break 2
fi
done
done
if $found; then
# deplib is a libtool library
# If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
# We need to do some special things here, and not later.
if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $deplib "*)
if func_lalib_p "$lib"; then
library_names=
old_library=
func_source "$lib"
for l in $old_library $library_names; do
ll=$l
done
if test "X$ll" = "X$old_library"; then # only static version available
found=false
func_dirname "$lib" "" "."
ladir=$func_dirname_result
lib=$ladir/$old_library
if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
fi
continue
fi
fi
;;
*) ;;
esac
fi
else
# deplib doesn't seem to be a libtool library
if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
fi
continue
fi
;; # -l
*.ltframework)
if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
if test lib = "$linkmode"; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
* ) func_append new_inherited_linker_flags " $deplib" ;;
esac
fi
fi
continue
;;
-L*)
case $linkmode in
lib)
deplibs="$deplib $deplibs"
test conv = "$pass" && continue
newdependency_libs="$deplib $newdependency_libs"
func_stripname '-L' '' "$deplib"
func_resolve_sysroot "$func_stripname_result"
func_append newlib_search_path " $func_resolve_sysroot_result"
;;
prog)
if test conv = "$pass"; then
deplibs="$deplib $deplibs"
continue
fi
if test scan = "$pass"; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
fi
func_stripname '-L' '' "$deplib"
func_resolve_sysroot "$func_stripname_result"
func_append newlib_search_path " $func_resolve_sysroot_result"
;;
*)
func_warning "'-L' is ignored for archives/objects"
;;
esac # linkmode
continue
;; # -L
-R*)
if test link = "$pass"; then
func_stripname '-R' '' "$deplib"
func_resolve_sysroot "$func_stripname_result"
dir=$func_resolve_sysroot_result
# Make sure the xrpath contains only unique directories.
case "$xrpath " in
*" $dir "*) ;;
*) func_append xrpath " $dir" ;;
esac
fi
deplibs="$deplib $deplibs"
continue
;;
*.la)
func_resolve_sysroot "$deplib"
lib=$func_resolve_sysroot_result
;;
*.$libext)
if test conv = "$pass"; then
deplibs="$deplib $deplibs"
continue
fi
case $linkmode in
lib)
# Linking convenience modules into shared libraries is allowed,
# but linking other static libraries is non-portable.
case " $dlpreconveniencelibs " in
*" $deplib "*) ;;
*)
valid_a_lib=false
case $deplibs_check_method in
match_pattern*)
set dummy $deplibs_check_method; shift
match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
| $EGREP "$match_pattern_regex" > /dev/null; then
valid_a_lib=:
fi
;;
pass_all)
valid_a_lib=:
;;
esac
if $valid_a_lib; then
echo
$ECHO "*** Warning: Linking the shared library $output against the"
$ECHO "*** static library $deplib is not portable!"
deplibs="$deplib $deplibs"
else
echo
$ECHO "*** Warning: Trying to link with static lib archive $deplib."
echo "*** I have the capability to make that library automatically link in when"
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have"
echo "*** because the file extensions .$libext of this argument makes me believe"
echo "*** that it is just a static archive that I should not use here."
fi
;;
esac
continue
;;
prog)
if test link != "$pass"; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
fi
continue
;;
esac # linkmode
;; # *.$libext
*.lo | *.$objext)
if test conv = "$pass"; then
deplibs="$deplib $deplibs"
elif test prog = "$linkmode"; then
if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then
# If there is no dlopen support or we're linking statically,
# we need to preload.
func_append newdlprefiles " $deplib"
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
func_append newdlfiles " $deplib"
fi
fi
continue
;;
%DEPLIBS%)
alldeplibs=:
continue
;;
esac # case $deplib
$found || test -f "$lib" \
|| func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'"
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$lib" \
|| func_fatal_error "'$lib' is not a valid libtool archive"
func_dirname "$lib" "" "."
ladir=$func_dirname_result
dlname=
dlopen=
dlpreopen=
libdir=
library_names=
old_library=
inherited_linker_flags=
# If the library was installed with an old release of libtool,
# it will not redefine variables installed, or shouldnotlink
installed=yes
shouldnotlink=no
avoidtemprpath=
# Read the .la file
func_source "$lib"
# Convert "-framework foo" to "foo.ltframework"
if test -n "$inherited_linker_flags"; then
tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
case " $new_inherited_linker_flags " in
*" $tmp_inherited_linker_flag "*) ;;
*) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
esac
done
fi
dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
if test lib,link = "$linkmode,$pass" ||
test prog,scan = "$linkmode,$pass" ||
{ test prog != "$linkmode" && test lib != "$linkmode"; }; then
test -n "$dlopen" && func_append dlfiles " $dlopen"
test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
fi
if test conv = "$pass"; then
# Only check for convenience libraries
deplibs="$lib $deplibs"
if test -z "$libdir"; then
if test -z "$old_library"; then
func_fatal_error "cannot find name of link library for '$lib'"
fi
# It is a libtool convenience library, so add in its objects.
func_append convenience " $ladir/$objdir/$old_library"
func_append old_convenience " $ladir/$objdir/$old_library"
elif test prog != "$linkmode" && test lib != "$linkmode"; then
func_fatal_error "'$lib' is not a convenience library"
fi
tmp_libs=
for deplib in $dependency_libs; do
deplibs="$deplib $deplibs"
if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
func_append tmp_libs " $deplib"
done
continue
fi # $pass = conv
# Get the name of the library we link against.
linklib=
if test -n "$old_library" &&
{ test yes = "$prefer_static_libs" ||
test built,no = "$prefer_static_libs,$installed"; }; then
linklib=$old_library
else
for l in $old_library $library_names; do
linklib=$l
done
fi
if test -z "$linklib"; then
func_fatal_error "cannot find name of link library for '$lib'"
fi
# This library was specified with -dlopen.
if test dlopen = "$pass"; then
test -z "$libdir" \
&& func_fatal_error "cannot -dlopen a convenience library: '$lib'"
if test -z "$dlname" ||
test yes != "$dlopen_support" ||
test no = "$build_libtool_libs"
then
# If there is no dlname, no dlopen support or we're linking
# statically, we need to preload. We also need to preload any
# dependent libraries so libltdl's deplib preloader doesn't
# bomb out in the load deplibs phase.
func_append dlprefiles " $lib $dependency_libs"
else
func_append newdlfiles " $lib"
fi
continue
fi # $pass = dlopen
# We need an absolute path.
case $ladir in
[\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;;
*)
abs_ladir=`cd "$ladir" && pwd`
if test -z "$abs_ladir"; then
func_warning "cannot determine absolute directory name of '$ladir'"
func_warning "passing it literally to the linker, although it might fail"
abs_ladir=$ladir
fi
;;
esac
func_basename "$lib"
laname=$func_basename_result
# Find the relevant object directory and library name.
if test yes = "$installed"; then
if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
func_warning "library '$lib' was moved."
dir=$ladir
absdir=$abs_ladir
libdir=$abs_ladir
else
dir=$lt_sysroot$libdir
absdir=$lt_sysroot$libdir
fi
test yes = "$hardcode_automatic" && avoidtemprpath=yes
else
if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
dir=$ladir
absdir=$abs_ladir
# Remove this search path later
func_append notinst_path " $abs_ladir"
else
dir=$ladir/$objdir
absdir=$abs_ladir/$objdir
# Remove this search path later
func_append notinst_path " $abs_ladir"
fi
fi # $installed = yes
func_stripname 'lib' '.la' "$laname"
name=$func_stripname_result
# This library was specified with -dlpreopen.
if test dlpreopen = "$pass"; then
if test -z "$libdir" && test prog = "$linkmode"; then
func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'"
fi
case $host in
# special handling for platforms with PE-DLLs.
*cygwin* | *mingw* | *cegcc* )
# Linker will automatically link against shared library if both
# static and shared are present. Therefore, ensure we extract
# symbols from the import library if a shared library is present
# (otherwise, the dlopen module name will be incorrect). We do
# this by putting the import library name into $newdlprefiles.
# We recover the dlopen module name by 'saving' the la file
# name in a special purpose variable, and (later) extracting the
# dlname from the la file.
if test -n "$dlname"; then
func_tr_sh "$dir/$linklib"
eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
func_append newdlprefiles " $dir/$linklib"
else
func_append newdlprefiles " $dir/$old_library"
# Keep a list of preopened convenience libraries to check
# that they are being used correctly in the link pass.
test -z "$libdir" && \
func_append dlpreconveniencelibs " $dir/$old_library"
fi
;;
* )
# Prefer using a static library (so that no silly _DYNAMIC symbols
# are required to link).
if test -n "$old_library"; then
func_append newdlprefiles " $dir/$old_library"
# Keep a list of preopened convenience libraries to check
# that they are being used correctly in the link pass.
test -z "$libdir" && \
func_append dlpreconveniencelibs " $dir/$old_library"
# Otherwise, use the dlname, so that lt_dlopen finds it.
elif test -n "$dlname"; then
func_append newdlprefiles " $dir/$dlname"
else
func_append newdlprefiles " $dir/$linklib"
fi
;;
esac
fi # $pass = dlpreopen
if test -z "$libdir"; then
# Link the convenience library
if test lib = "$linkmode"; then
deplibs="$dir/$old_library $deplibs"
elif test prog,link = "$linkmode,$pass"; then
compile_deplibs="$dir/$old_library $compile_deplibs"
finalize_deplibs="$dir/$old_library $finalize_deplibs"
else
deplibs="$lib $deplibs" # used for prog,scan pass
fi
continue
fi
if test prog = "$linkmode" && test link != "$pass"; then
func_append newlib_search_path " $ladir"
deplibs="$lib $deplibs"
linkalldeplibs=false
if test no != "$link_all_deplibs" || test -z "$library_names" ||
test no = "$build_libtool_libs"; then
linkalldeplibs=:
fi
tmp_libs=
for deplib in $dependency_libs; do
case $deplib in
-L*) func_stripname '-L' '' "$deplib"
func_resolve_sysroot "$func_stripname_result"
func_append newlib_search_path " $func_resolve_sysroot_result"
;;
esac
# Need to link against all dependency_libs?
if $linkalldeplibs; then
deplibs="$deplib $deplibs"
else
# Need to hardcode shared library paths
# or/and link against static libraries
newdependency_libs="$deplib $newdependency_libs"
fi
if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
func_append tmp_libs " $deplib"
done # for deplib
continue
fi # $linkmode = prog...
if test prog,link = "$linkmode,$pass"; then
if test -n "$library_names" &&
{ { test no = "$prefer_static_libs" ||
test built,yes = "$prefer_static_libs,$installed"; } ||
test -z "$old_library"; }; then
# We need to hardcode the library path
if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
# Make sure the rpath contains only unique directories.
case $temp_rpath: in
*"$absdir:"*) ;;
*) func_append temp_rpath "$absdir:" ;;
esac
fi
# Hardcode the library path.
# Skip directories that are in the system default run-time
# search path.
case " $sys_lib_dlsearch_path " in
*" $absdir "*) ;;
*)
case "$compile_rpath " in
*" $absdir "*) ;;
*) func_append compile_rpath " $absdir" ;;
esac
;;
esac
case " $sys_lib_dlsearch_path " in
*" $libdir "*) ;;
*)
case "$finalize_rpath " in
*" $libdir "*) ;;
*) func_append finalize_rpath " $libdir" ;;
esac
;;
esac
fi # $linkmode,$pass = prog,link...
if $alldeplibs &&
{ test pass_all = "$deplibs_check_method" ||
{ test yes = "$build_libtool_libs" &&
test -n "$library_names"; }; }; then
# We only need to search for static libraries
continue
fi
fi
link_static=no # Whether the deplib will be linked statically
use_static_libs=$prefer_static_libs
if test built = "$use_static_libs" && test yes = "$installed"; then
use_static_libs=no
fi
if test -n "$library_names" &&
{ test no = "$use_static_libs" || test -z "$old_library"; }; then
case $host in
*cygwin* | *mingw* | *cegcc* | *os2*)
# No point in relinking DLLs because paths are not encoded
func_append notinst_deplibs " $lib"
need_relink=no
;;
*)
if test no = "$installed"; then
func_append notinst_deplibs " $lib"
need_relink=yes
fi
;;
esac
# This is a shared library
# Warn about portability, can't link against -module's on some
# systems (darwin). Don't bleat about dlopened modules though!
dlopenmodule=
for dlpremoduletest in $dlprefiles; do
if test "X$dlpremoduletest" = "X$lib"; then
dlopenmodule=$dlpremoduletest
break
fi
done
if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then
echo
if test prog = "$linkmode"; then
$ECHO "*** Warning: Linking the executable $output against the loadable module"
else
$ECHO "*** Warning: Linking the shared library $output against the loadable module"
fi
$ECHO "*** $linklib is not portable!"
fi
if test lib = "$linkmode" &&
test yes = "$hardcode_into_libs"; then
# Hardcode the library path.
# Skip directories that are in the system default run-time
# search path.
case " $sys_lib_dlsearch_path " in
*" $absdir "*) ;;
*)
case "$compile_rpath " in
*" $absdir "*) ;;
*) func_append compile_rpath " $absdir" ;;
esac
;;
esac
case " $sys_lib_dlsearch_path " in
*" $libdir "*) ;;
*)
case "$finalize_rpath " in
*" $libdir "*) ;;
*) func_append finalize_rpath " $libdir" ;;
esac
;;
esac
fi
if test -n "$old_archive_from_expsyms_cmds"; then
# figure out the soname
set dummy $library_names
shift
realname=$1
shift
libname=`eval "\\$ECHO \"$libname_spec\""`
# use dlname if we got it. it's perfectly good, no?
if test -n "$dlname"; then
soname=$dlname
elif test -n "$soname_spec"; then
# bleh windows
case $host in
*cygwin* | mingw* | *cegcc* | *os2*)
func_arith $current - $age
major=$func_arith_result
versuffix=-$major
;;
esac
eval soname=\"$soname_spec\"
else
soname=$realname
fi
# Make a new name for the extract_expsyms_cmds to use
soroot=$soname
func_basename "$soroot"
soname=$func_basename_result
func_stripname 'lib' '.dll' "$soname"
newlib=libimp-$func_stripname_result.a
# If the library has no export list, then create one now
if test -f "$output_objdir/$soname-def"; then :
else
func_verbose "extracting exported symbol list from '$soname'"
func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
fi
# Create $newlib
if test -f "$output_objdir/$newlib"; then :; else
func_verbose "generating import library for '$soname'"
func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
fi
# make sure the library variables are pointing to the new library
dir=$output_objdir
linklib=$newlib
fi # test -n "$old_archive_from_expsyms_cmds"
if test prog = "$linkmode" || test relink != "$opt_mode"; then
add_shlibpath=
add_dir=
add=
lib_linked=yes
case $hardcode_action in
immediate | unsupported)
if test no = "$hardcode_direct"; then
add=$dir/$linklib
case $host in
*-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;;
*-*-sysv4*uw2*) add_dir=-L$dir ;;
*-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
*-*-unixware7*) add_dir=-L$dir ;;
*-*-darwin* )
# if the lib is a (non-dlopened) module then we cannot
# link against it, someone is ignoring the earlier warnings
if /usr/bin/file -L $add 2> /dev/null |
$GREP ": [^:]* bundle" >/dev/null; then
if test "X$dlopenmodule" != "X$lib"; then
$ECHO "*** Warning: lib $linklib is a module, not a shared library"
if test -z "$old_library"; then
echo
echo "*** And there doesn't seem to be a static archive available"
echo "*** The link will probably fail, sorry"
else
add=$dir/$old_library
fi
elif test -n "$old_library"; then
add=$dir/$old_library
fi
fi
esac
elif test no = "$hardcode_minus_L"; then
case $host in
*-*-sunos*) add_shlibpath=$dir ;;
esac
add_dir=-L$dir
add=-l$name
elif test no = "$hardcode_shlibpath_var"; then
add_shlibpath=$dir
add=-l$name
else
lib_linked=no
fi
;;
relink)
if test yes = "$hardcode_direct" &&
test no = "$hardcode_direct_absolute"; then
add=$dir/$linklib
elif test yes = "$hardcode_minus_L"; then
add_dir=-L$absdir
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
[\\/]*)
func_append add_dir " -L$inst_prefix_dir$libdir"
;;
esac
fi
add=-l$name
elif test yes = "$hardcode_shlibpath_var"; then
add_shlibpath=$dir
add=-l$name
else
lib_linked=no
fi
;;
*) lib_linked=no ;;
esac
if test yes != "$lib_linked"; then
func_fatal_configuration "unsupported hardcode properties"
fi
if test -n "$add_shlibpath"; then
case :$compile_shlibpath: in
*":$add_shlibpath:"*) ;;
*) func_append compile_shlibpath "$add_shlibpath:" ;;
esac
fi
if test prog = "$linkmode"; then
test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
test -n "$add" && compile_deplibs="$add $compile_deplibs"
else
test -n "$add_dir" && deplibs="$add_dir $deplibs"
test -n "$add" && deplibs="$add $deplibs"
if test yes != "$hardcode_direct" &&
test yes != "$hardcode_minus_L" &&
test yes = "$hardcode_shlibpath_var"; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
*) func_append finalize_shlibpath "$libdir:" ;;
esac
fi
fi
fi
if test prog = "$linkmode" || test relink = "$opt_mode"; then
add_shlibpath=
add_dir=
add=
# Finalize command for both is simple: just hardcode it.
if test yes = "$hardcode_direct" &&
test no = "$hardcode_direct_absolute"; then
add=$libdir/$linklib
elif test yes = "$hardcode_minus_L"; then
add_dir=-L$libdir
add=-l$name
elif test yes = "$hardcode_shlibpath_var"; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
*) func_append finalize_shlibpath "$libdir:" ;;
esac
add=-l$name
elif test yes = "$hardcode_automatic"; then
if test -n "$inst_prefix_dir" &&
test -f "$inst_prefix_dir$libdir/$linklib"; then
add=$inst_prefix_dir$libdir/$linklib
else
add=$libdir/$linklib
fi
else
# We cannot seem to hardcode it, guess we'll fake it.
add_dir=-L$libdir
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
[\\/]*)
func_append add_dir " -L$inst_prefix_dir$libdir"
;;
esac
fi
add=-l$name
fi
if test prog = "$linkmode"; then
test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
else
test -n "$add_dir" && deplibs="$add_dir $deplibs"
test -n "$add" && deplibs="$add $deplibs"
fi
fi
elif test prog = "$linkmode"; then
# Here we assume that one of hardcode_direct or hardcode_minus_L
# is not unsupported. This is valid on all known static and
# shared platforms.
if test unsupported != "$hardcode_direct"; then
test -n "$old_library" && linklib=$old_library
compile_deplibs="$dir/$linklib $compile_deplibs"
finalize_deplibs="$dir/$linklib $finalize_deplibs"
else
compile_deplibs="-l$name -L$dir $compile_deplibs"
finalize_deplibs="-l$name -L$dir $finalize_deplibs"
fi
elif test yes = "$build_libtool_libs"; then
# Not a shared library
if test pass_all != "$deplibs_check_method"; then
# We're trying link a shared library against a static one
# but the system doesn't support it.
# Just print a warning and add the library to dependency_libs so
# that the program can be linked against the static library.
echo
$ECHO "*** Warning: This system cannot link to static lib archive $lib."
echo "*** I have the capability to make that library automatically link in when"
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have."
if test yes = "$module"; then
echo "*** But as you try to build a module library, libtool will still create "
echo "*** a static module, that should work as long as the dlopening application"
echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
if test -z "$global_symbol_pipe"; then
echo
echo "*** However, this would only work if libtool was able to extract symbol"
echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
echo "*** not find such a program. So, this module is probably useless."
echo "*** 'nm' from GNU binutils and a full rebuild may help."
fi
if test no = "$build_old_libs"; then
build_libtool_libs=module
build_old_libs=yes
else
build_libtool_libs=no
fi
fi
else
deplibs="$dir/$old_library $deplibs"
link_static=yes
fi
fi # link shared/static library?
if test lib = "$linkmode"; then
if test -n "$dependency_libs" &&
{ test yes != "$hardcode_into_libs" ||
test yes = "$build_old_libs" ||
test yes = "$link_static"; }; then
# Extract -R from dependency_libs
temp_deplibs=
for libdir in $dependency_libs; do
case $libdir in
-R*) func_stripname '-R' '' "$libdir"
temp_xrpath=$func_stripname_result
case " $xrpath " in
*" $temp_xrpath "*) ;;
*) func_append xrpath " $temp_xrpath";;
esac;;
*) func_append temp_deplibs " $libdir";;
esac
done
dependency_libs=$temp_deplibs
fi
func_append newlib_search_path " $absdir"
# Link against this library
test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
# ... and its dependency_libs
tmp_libs=
for deplib in $dependency_libs; do
newdependency_libs="$deplib $newdependency_libs"
case $deplib in
-L*) func_stripname '-L' '' "$deplib"
func_resolve_sysroot "$func_stripname_result";;
*) func_resolve_sysroot "$deplib" ;;
esac
if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $func_resolve_sysroot_result "*)
func_append specialdeplibs " $func_resolve_sysroot_result" ;;
esac
fi
func_append tmp_libs " $func_resolve_sysroot_result"
done
if test no != "$link_all_deplibs"; then
# Add the search paths of all dependency libraries
for deplib in $dependency_libs; do
path=
case $deplib in
-L*) path=$deplib ;;
*.la)
func_resolve_sysroot "$deplib"
deplib=$func_resolve_sysroot_result
func_dirname "$deplib" "" "."
dir=$func_dirname_result
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;;
*)
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
func_warning "cannot determine absolute directory name of '$dir'"
absdir=$dir
fi
;;
esac
if $GREP "^installed=no" $deplib > /dev/null; then
case $host in
*-*-darwin*)
depdepl=
eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
if test -n "$deplibrary_names"; then
for tmp in $deplibrary_names; do
depdepl=$tmp
done
if test -f "$absdir/$objdir/$depdepl"; then
depdepl=$absdir/$objdir/$depdepl
darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
if test -z "$darwin_install_name"; then
darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
fi
func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl"
func_append linker_flags " -dylib_file $darwin_install_name:$depdepl"
path=
fi
fi
;;
*)
path=-L$absdir/$objdir
;;
esac
else
eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
test -z "$libdir" && \
func_fatal_error "'$deplib' is not a valid libtool archive"
test "$absdir" != "$libdir" && \
func_warning "'$deplib' seems to be moved"
path=-L$absdir
fi
;;
esac
case " $deplibs " in
*" $path "*) ;;
*) deplibs="$path $deplibs" ;;
esac
done
fi # link_all_deplibs != no
fi # linkmode = lib
done # for deplib in $libs
if test link = "$pass"; then
if test prog = "$linkmode"; then
compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
else
compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
fi
fi
dependency_libs=$newdependency_libs
if test dlpreopen = "$pass"; then
# Link the dlpreopened libraries before other libraries
for deplib in $save_deplibs; do
deplibs="$deplib $deplibs"
done
fi
if test dlopen != "$pass"; then
test conv = "$pass" || {
# Make sure lib_search_path contains only unique directories.
lib_search_path=
for dir in $newlib_search_path; do
case "$lib_search_path " in
*" $dir "*) ;;
*) func_append lib_search_path " $dir" ;;
esac
done
newlib_search_path=
}
if test prog,link = "$linkmode,$pass"; then
vars="compile_deplibs finalize_deplibs"
else
vars=deplibs
fi
for var in $vars dependency_libs; do
# Add libraries to $var in reverse order
eval tmp_libs=\"\$$var\"
new_libs=
for deplib in $tmp_libs; do
# FIXME: Pedantically, this is the right thing to do, so
# that some nasty dependency loop isn't accidentally
# broken:
#new_libs="$deplib $new_libs"
# Pragmatically, this seems to cause very few problems in
# practice:
case $deplib in
-L*) new_libs="$deplib $new_libs" ;;
-R*) ;;
*)
# And here is the reason: when a library appears more
# than once as an explicit dependence of a library, or
# is implicitly linked in more than once by the
# compiler, it is considered special, and multiple
# occurrences thereof are not removed. Compare this
# with having the same library being listed as a
# dependency of multiple other libraries: in this case,
# we know (pedantically, we assume) the library does not
# need to be listed more than once, so we keep only the
# last copy. This is not always right, but it is rare
# enough that we require users that really mean to play
# such unportable linking tricks to link the library
# using -Wl,-lname, so that libtool does not consider it
# for duplicate removal.
case " $specialdeplibs " in
*" $deplib "*) new_libs="$deplib $new_libs" ;;
*)
case " $new_libs " in
*" $deplib "*) ;;
*) new_libs="$deplib $new_libs" ;;
esac
;;
esac
;;
esac
done
tmp_libs=
for deplib in $new_libs; do
case $deplib in
-L*)
case " $tmp_libs " in
*" $deplib "*) ;;
*) func_append tmp_libs " $deplib" ;;
esac
;;
*) func_append tmp_libs " $deplib" ;;
esac
done
eval $var=\"$tmp_libs\"
done # for var
fi
# Add Sun CC postdeps if required:
test CXX = "$tagname" && {
case $host_os in
linux*)
case `$CC -V 2>&1 | $SED 5q` in
*Sun\ C*) # Sun C++ 5.9
func_suncc_cstd_abi
if test no != "$suncc_use_cstd_abi"; then
func_append postdeps ' -library=Cstd -library=Crun'
fi
;;
esac
;;
solaris*)
func_cc_basename "$CC"
case $func_cc_basename_result in
CC* | sunCC*)
func_suncc_cstd_abi
if test no != "$suncc_use_cstd_abi"; then
func_append postdeps ' -library=Cstd -library=Crun'
fi
;;
esac
;;
esac
}
# Last step: remove runtime libs from dependency_libs
# (they stay in deplibs)
tmp_libs=
for i in $dependency_libs; do
case " $predeps $postdeps $compiler_lib_search_path " in
*" $i "*)
i=
;;
esac
if test -n "$i"; then
func_append tmp_libs " $i"
fi
done
dependency_libs=$tmp_libs
done # for pass
if test prog = "$linkmode"; then
dlfiles=$newdlfiles
fi
if test prog = "$linkmode" || test lib = "$linkmode"; then
dlprefiles=$newdlprefiles
fi
case $linkmode in
oldlib)
if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
func_warning "'-dlopen' is ignored for archives"
fi
case " $deplibs" in
*\ -l* | *\ -L*)
func_warning "'-l' and '-L' are ignored for archives" ;;
esac
test -n "$rpath" && \
func_warning "'-rpath' is ignored for archives"
test -n "$xrpath" && \
func_warning "'-R' is ignored for archives"
test -n "$vinfo" && \
func_warning "'-version-info/-version-number' is ignored for archives"
test -n "$release" && \
func_warning "'-release' is ignored for archives"
test -n "$export_symbols$export_symbols_regex" && \
func_warning "'-export-symbols' is ignored for archives"
# Now set the variables for building old libraries.
build_libtool_libs=no
oldlibs=$output
func_append objs "$old_deplibs"
;;
lib)
# Make sure we only generate libraries of the form 'libNAME.la'.
case $outputname in
lib*)
func_stripname 'lib' '.la' "$outputname"
name=$func_stripname_result
eval shared_ext=\"$shrext_cmds\"
eval libname=\"$libname_spec\"
;;
*)
test no = "$module" \
&& func_fatal_help "libtool library '$output' must begin with 'lib'"
if test no != "$need_lib_prefix"; then
# Add the "lib" prefix for modules if required
func_stripname '' '.la' "$outputname"
name=$func_stripname_result
eval shared_ext=\"$shrext_cmds\"
eval libname=\"$libname_spec\"
else
func_stripname '' '.la' "$outputname"
libname=$func_stripname_result
fi
;;
esac
if test -n "$objs"; then
if test pass_all != "$deplibs_check_method"; then
func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs"
else
echo
$ECHO "*** Warning: Linking the shared library $output against the non-libtool"
$ECHO "*** objects $objs is not portable!"
func_append libobjs " $objs"
fi
fi
test no = "$dlself" \
|| func_warning "'-dlopen self' is ignored for libtool libraries"
set dummy $rpath
shift
test 1 -lt "$#" \
&& func_warning "ignoring multiple '-rpath's for a libtool library"
install_libdir=$1
oldlibs=
if test -z "$rpath"; then
if test yes = "$build_libtool_libs"; then
# Building a libtool convenience library.
# Some compilers have problems with a '.al' extension so
# convenience libraries should have the same extension an
# archive normally would.
oldlibs="$output_objdir/$libname.$libext $oldlibs"
build_libtool_libs=convenience
build_old_libs=yes
fi
test -n "$vinfo" && \
func_warning "'-version-info/-version-number' is ignored for convenience libraries"
test -n "$release" && \
func_warning "'-release' is ignored for convenience libraries"
else
# Parse the version information argument.
save_ifs=$IFS; IFS=:
set dummy $vinfo 0 0 0
shift
IFS=$save_ifs
test -n "$7" && \
func_fatal_help "too many parameters to '-version-info'"
# convert absolute version numbers to libtool ages
# this retains compatibility with .la files and attempts
# to make the code below a bit more comprehensible
case $vinfo_number in
yes)
number_major=$1
number_minor=$2
number_revision=$3
#
# There are really only two kinds -- those that
# use the current revision as the major version
# and those that subtract age and use age as
# a minor version. But, then there is irix
# that has an extra 1 added just for fun
#
case $version_type in
# correct linux to gnu/linux during the next big refactor
darwin|freebsd-elf|linux|midnightbsd-elf|osf|windows|none)
func_arith $number_major + $number_minor
current=$func_arith_result
age=$number_minor
revision=$number_revision
;;
freebsd-aout|qnx|sunos)
current=$number_major
revision=$number_minor
age=0
;;
irix|nonstopux)
func_arith $number_major + $number_minor
current=$func_arith_result
age=$number_minor
revision=$number_minor
lt_irix_increment=no
;;
esac
;;
no)
current=$1
revision=$2
age=$3
;;
esac
# Check that each of the things are valid numbers.
case $current in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
func_error "CURRENT '$current' must be a nonnegative integer"
func_fatal_error "'$vinfo' is not valid version information"
;;
esac
case $revision in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
func_error "REVISION '$revision' must be a nonnegative integer"
func_fatal_error "'$vinfo' is not valid version information"
;;
esac
case $age in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
func_error "AGE '$age' must be a nonnegative integer"
func_fatal_error "'$vinfo' is not valid version information"
;;
esac
if test "$age" -gt "$current"; then
func_error "AGE '$age' is greater than the current interface number '$current'"
func_fatal_error "'$vinfo' is not valid version information"
fi
# Calculate the version variables.
major=
versuffix=
verstring=
case $version_type in
none) ;;
darwin)
# Like Linux, but with the current version available in
# verstring for coding it into the library header
func_arith $current - $age
major=.$func_arith_result
versuffix=$major.$age.$revision
# Darwin ld doesn't like 0 for these options...
func_arith $current + 1
minor_current=$func_arith_result
xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
# On Darwin other compilers
case $CC in
nagfor*)
verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
;;
*)
verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
;;
esac
;;
freebsd-aout)
major=.$current
versuffix=.$current.$revision
;;
freebsd-elf | midnightbsd-elf)
func_arith $current - $age
major=.$func_arith_result
versuffix=$major.$age.$revision
;;
irix | nonstopux)
if test no = "$lt_irix_increment"; then
func_arith $current - $age
else
func_arith $current - $age + 1
fi
major=$func_arith_result
case $version_type in
nonstopux) verstring_prefix=nonstopux ;;
*) verstring_prefix=sgi ;;
esac
verstring=$verstring_prefix$major.$revision
# Add in all the interfaces that we are compatible with.
loop=$revision
while test 0 -ne "$loop"; do
func_arith $revision - $loop
iface=$func_arith_result
func_arith $loop - 1
loop=$func_arith_result
verstring=$verstring_prefix$major.$iface:$verstring
done
# Before this point, $major must not contain '.'.
major=.$major
versuffix=$major.$revision
;;
linux) # correct to gnu/linux during the next big refactor
func_arith $current - $age
major=.$func_arith_result
versuffix=$major.$age.$revision
;;
osf)
func_arith $current - $age
major=.$func_arith_result
versuffix=.$current.$age.$revision
verstring=$current.$age.$revision
# Add in all the interfaces that we are compatible with.
loop=$age
while test 0 -ne "$loop"; do
func_arith $current - $loop
iface=$func_arith_result
func_arith $loop - 1
loop=$func_arith_result
verstring=$verstring:$iface.0
done
# Make executables depend on our current version.
func_append verstring ":$current.0"
;;
qnx)
major=.$current
versuffix=.$current
;;
sco)
major=.$current
versuffix=.$current
;;
sunos)
major=.$current
versuffix=.$current.$revision
;;
windows)
# Use '-' rather than '.', since we only want one
# extension on DOS 8.3 file systems.
func_arith $current - $age
major=$func_arith_result
versuffix=-$major
;;
*)
func_fatal_configuration "unknown library version type '$version_type'"
;;
esac
# Clear the version info if we defaulted, and they specified a release.
if test -z "$vinfo" && test -n "$release"; then
major=
case $version_type in
darwin)
# we can't check for "0.0" in archive_cmds due to quoting
# problems, so we reset it completely
verstring=
;;
*)
verstring=0.0
;;
esac
if test no = "$need_version"; then
versuffix=
else
versuffix=.0.0
fi
fi
# Remove version info from name if versioning should be avoided
if test yes,no = "$avoid_version,$need_version"; then
major=
versuffix=
verstring=
fi
# Check to see if the archive will have undefined symbols.
if test yes = "$allow_undefined"; then
if test unsupported = "$allow_undefined_flag"; then
if test yes = "$build_old_libs"; then
func_warning "undefined symbols not allowed in $host shared libraries; building static only"
build_libtool_libs=no
else
func_fatal_error "can't build $host shared library unless -no-undefined is specified"
fi
fi
else
# Don't allow undefined symbols.
allow_undefined_flag=$no_undefined_flag
fi
fi
func_generate_dlsyms "$libname" "$libname" :
func_append libobjs " $symfileobj"
test " " = "$libobjs" && libobjs=
if test relink != "$opt_mode"; then
# Remove our outputs, but don't remove object files since they
# may have been created when compiling PIC objects.
removelist=
tempremovelist=`$ECHO "$output_objdir/*"`
for p in $tempremovelist; do
case $p in
*.$objext | *.gcno)
;;
$output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*)
if test -n "$precious_files_regex"; then
if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
then
continue
fi
fi
func_append removelist " $p"
;;
*) ;;
esac
done
test -n "$removelist" && \
func_show_eval "${RM}r \$removelist"
fi
# Now set the variables for building old libraries.
if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then
func_append oldlibs " $output_objdir/$libname.$libext"
# Transform .lo files to .o files.
oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
fi
# Eliminate all temporary directories.
#for path in $notinst_path; do
# lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
# deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
# dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
#done
if test -n "$xrpath"; then
# If the user specified any rpath flags, then add them.
temp_xrpath=
for libdir in $xrpath; do
func_replace_sysroot "$libdir"
func_append temp_xrpath " -R$func_replace_sysroot_result"
case "$finalize_rpath " in
*" $libdir "*) ;;
*) func_append finalize_rpath " $libdir" ;;
esac
done
if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then
dependency_libs="$temp_xrpath $dependency_libs"
fi
fi
# Make sure dlfiles contains only unique files that won't be dlpreopened
old_dlfiles=$dlfiles
dlfiles=
for lib in $old_dlfiles; do
case " $dlprefiles $dlfiles " in
*" $lib "*) ;;
*) func_append dlfiles " $lib" ;;
esac
done
# Make sure dlprefiles contains only unique files
old_dlprefiles=$dlprefiles
dlprefiles=
for lib in $old_dlprefiles; do
case "$dlprefiles " in
*" $lib "*) ;;
*) func_append dlprefiles " $lib" ;;
esac
done
if test yes = "$build_libtool_libs"; then
if test -n "$rpath"; then
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
# these systems don't actually have a c library (as such)!
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C library is in the System framework
func_append deplibs " System.ltframework"
;;
*-*-netbsd*)
# Don't link with libc until the a.out ld.so is fixed.
;;
*-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-midnightbsd*)
# Do not include libc due to us having libc/libc_r.
;;
*-*-sco3.2v5* | *-*-sco5v6*)
# Causes problems with __ctype
;;
*-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
# Compiler inserts libc in the correct place for threads to work
;;
*)
# Add libc to deplibs on all other systems if necessary.
if test yes = "$build_libtool_need_lc"; then
func_append deplibs " -lc"
fi
;;
esac
fi
# Transform deplibs into only deplibs that can be linked in shared.
name_save=$name
libname_save=$libname
release_save=$release
versuffix_save=$versuffix
major_save=$major
# I'm not sure if I'm treating the release correctly. I think
# release should show up in the -l (ie -lgmp5) so we don't want to
# add it in twice. Is that correct?
release=
versuffix=
major=
newdeplibs=
droppeddeps=no
case $deplibs_check_method in
pass_all)
# Don't check for shared/static. Everything works.
# This might be a little naive. We might want to check
# whether the library exists or not. But this is on
# osf3 & osf4 and I'm not really sure... Just
# implementing what was already the behavior.
newdeplibs=$deplibs
;;
test_compile)
# This code stresses the "libraries are programs" paradigm to its
# limits. Maybe even breaks it. We compile a program, linking it
# against the deplibs as a proxy for the library. Then we can check
# whether they linked in statically or dynamically with ldd.
$opt_dry_run || $RM conftest.c
cat > conftest.c </dev/null`
$nocaseglob
else
potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
fi
for potent_lib in $potential_libs; do
# Follow soft links.
if ls -lLd "$potent_lib" 2>/dev/null |
$GREP " -> " >/dev/null; then
continue
fi
# The statement above tries to avoid entering an
# endless loop below, in case of cyclic links.
# We might still enter an endless loop, since a link
# loop can be closed while we follow links,
# but so what?
potlib=$potent_lib
while test -h "$potlib" 2>/dev/null; do
potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
case $potliblink in
[\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
*) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";;
esac
done
if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
$SED -e 10q |
$EGREP "$file_magic_regex" > /dev/null; then
func_append newdeplibs " $a_deplib"
a_deplib=
break 2
fi
done
done
fi
if test -n "$a_deplib"; then
droppeddeps=yes
echo
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
echo "*** I have the capability to make that library automatically link in when"
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have"
echo "*** because I did check the linker path looking for a file starting"
if test -z "$potlib"; then
$ECHO "*** with $libname but no candidates were found. (...for file magic test)"
else
$ECHO "*** with $libname and none of the candidates passed a file format test"
$ECHO "*** using a file magic. Last file checked: $potlib"
fi
fi
;;
*)
# Add a -L argument.
func_append newdeplibs " $a_deplib"
;;
esac
done # Gone through all deplibs.
;;
match_pattern*)
set dummy $deplibs_check_method; shift
match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
for a_deplib in $deplibs; do
case $a_deplib in
-l*)
func_stripname -l '' "$a_deplib"
name=$func_stripname_result
if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $a_deplib "*)
func_append newdeplibs " $a_deplib"
a_deplib=
;;
esac
fi
if test -n "$a_deplib"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
for potent_lib in $potential_libs; do
potlib=$potent_lib # see symlink-check above in file_magic test
if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
$EGREP "$match_pattern_regex" > /dev/null; then
func_append newdeplibs " $a_deplib"
a_deplib=
break 2
fi
done
done
fi
if test -n "$a_deplib"; then
droppeddeps=yes
echo
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
echo "*** I have the capability to make that library automatically link in when"
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have"
echo "*** because I did check the linker path looking for a file starting"
if test -z "$potlib"; then
$ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
else
$ECHO "*** with $libname and none of the candidates passed a file format test"
$ECHO "*** using a regex pattern. Last file checked: $potlib"
fi
fi
;;
*)
# Add a -L argument.
func_append newdeplibs " $a_deplib"
;;
esac
done # Gone through all deplibs.
;;
none | unknown | *)
newdeplibs=
tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
if test yes = "$allow_libtool_libs_with_static_runtimes"; then
for i in $predeps $postdeps; do
# can't use Xsed below, because $i might contain '/'
tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
done
fi
case $tmp_deplibs in
*[!\ \ ]*)
echo
if test none = "$deplibs_check_method"; then
echo "*** Warning: inter-library dependencies are not supported in this platform."
else
echo "*** Warning: inter-library dependencies are not known to be supported."
fi
echo "*** All declared inter-library dependencies are being dropped."
droppeddeps=yes
;;
esac
;;
esac
versuffix=$versuffix_save
major=$major_save
release=$release_save
libname=$libname_save
name=$name_save
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
# On Rhapsody replace the C library with the System framework
newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
;;
esac
if test yes = "$droppeddeps"; then
if test yes = "$module"; then
echo
echo "*** Warning: libtool could not satisfy all declared inter-library"
$ECHO "*** dependencies of module $libname. Therefore, libtool will create"
echo "*** a static module, that should work as long as the dlopening"
echo "*** application is linked with the -dlopen flag."
if test -z "$global_symbol_pipe"; then
echo
echo "*** However, this would only work if libtool was able to extract symbol"
echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
echo "*** not find such a program. So, this module is probably useless."
echo "*** 'nm' from GNU binutils and a full rebuild may help."
fi
if test no = "$build_old_libs"; then
oldlibs=$output_objdir/$libname.$libext
build_libtool_libs=module
build_old_libs=yes
else
build_libtool_libs=no
fi
else
echo "*** The inter-library dependencies that have been dropped here will be"
echo "*** automatically added whenever a program is linked with this library"
echo "*** or is declared to -dlopen it."
if test no = "$allow_undefined"; then
echo
echo "*** Since this library must not contain undefined symbols,"
echo "*** because either the platform does not support them or"
echo "*** it was explicitly requested with -no-undefined,"
echo "*** libtool will only create a static version of it."
if test no = "$build_old_libs"; then
oldlibs=$output_objdir/$libname.$libext
build_libtool_libs=module
build_old_libs=yes
else
build_libtool_libs=no
fi
fi
fi
fi
# Done checking deplibs!
deplibs=$newdeplibs
fi
# Time to change all our "foo.ltframework" stuff back to "-framework foo"
case $host in
*-*-darwin*)
newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
;;
esac
# move library search paths that coincide with paths to not yet
# installed libraries to the beginning of the library search list
new_libs=
for path in $notinst_path; do
case " $new_libs " in
*" -L$path/$objdir "*) ;;
*)
case " $deplibs " in
*" -L$path/$objdir "*)
func_append new_libs " -L$path/$objdir" ;;
esac
;;
esac
done
for deplib in $deplibs; do
case $deplib in
-L*)
case " $new_libs " in
*" $deplib "*) ;;
*) func_append new_libs " $deplib" ;;
esac
;;
*) func_append new_libs " $deplib" ;;
esac
done
deplibs=$new_libs
# All the library-specific variables (install_libdir is set above).
library_names=
old_library=
dlname=
# Test again, we may have decided not to build it any more
if test yes = "$build_libtool_libs"; then
# Remove $wl instances when linking with ld.
# FIXME: should test the right _cmds variable.
case $archive_cmds in
*\$LD\ *) wl= ;;
esac
if test yes = "$hardcode_into_libs"; then
# Hardcode the library paths
hardcode_libdirs=
dep_rpath=
rpath=$finalize_rpath
test relink = "$opt_mode" || rpath=$compile_rpath$rpath
for libdir in $rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
func_replace_sysroot "$libdir"
libdir=$func_replace_sysroot_result
if test -z "$hardcode_libdirs"; then
hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
func_append dep_rpath " $flag"
fi
elif test -n "$runpath_var"; then
case "$perm_rpath " in
*" $libdir "*) ;;
*) func_append perm_rpath " $libdir" ;;
esac
fi
done
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
libdir=$hardcode_libdirs
eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
fi
if test -n "$runpath_var" && test -n "$perm_rpath"; then
# We should set the runpath_var.
rpath=
for dir in $perm_rpath; do
func_append rpath "$dir:"
done
eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
fi
test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
fi
shlibpath=$finalize_shlibpath
test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
if test -n "$shlibpath"; then
eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
fi
# Get the real and link names of the library.
eval shared_ext=\"$shrext_cmds\"
eval library_names=\"$library_names_spec\"
set dummy $library_names
shift
realname=$1
shift
if test -n "$soname_spec"; then
eval soname=\"$soname_spec\"
else
soname=$realname
fi
if test -z "$dlname"; then
dlname=$soname
fi
lib=$output_objdir/$realname
linknames=
for link
do
func_append linknames " $link"
done
# Use standard objects if they are pic
test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
test "X$libobjs" = "X " && libobjs=
delfiles=
if test -n "$export_symbols" && test -n "$include_expsyms"; then
$opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
export_symbols=$output_objdir/$libname.uexp
func_append delfiles " $export_symbols"
fi
orig_export_symbols=
case $host_os in
cygwin* | mingw* | cegcc*)
if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
# exporting using user supplied symfile
func_dll_def_p "$export_symbols" || {
# and it's NOT already a .def file. Must figure out
# which of the given symbols are data symbols and tag
# them as such. So, trigger use of export_symbols_cmds.
# export_symbols gets reassigned inside the "prepare
# the list of exported symbols" if statement, so the
# include_expsyms logic still works.
orig_export_symbols=$export_symbols
export_symbols=
always_export_symbols=yes
}
fi
;;
esac
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then
func_verbose "generating symbol list for '$libname.la'"
export_symbols=$output_objdir/$libname.exp
$opt_dry_run || $RM $export_symbols
cmds=$export_symbols_cmds
save_ifs=$IFS; IFS='~'
for cmd1 in $cmds; do
IFS=$save_ifs
# Take the normal branch if the nm_file_list_spec branch
# doesn't work or if tool conversion is not needed.
case $nm_file_list_spec~$to_tool_file_cmd in
*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
try_normal_branch=yes
eval cmd=\"$cmd1\"
func_len " $cmd"
len=$func_len_result
;;
*)
try_normal_branch=no
;;
esac
if test yes = "$try_normal_branch" \
&& { test "$len" -lt "$max_cmd_len" \
|| test "$max_cmd_len" -le -1; }
then
func_show_eval "$cmd" 'exit $?'
skipped_export=false
elif test -n "$nm_file_list_spec"; then
func_basename "$output"
output_la=$func_basename_result
save_libobjs=$libobjs
save_output=$output
output=$output_objdir/$output_la.nm
func_to_tool_file "$output"
libobjs=$nm_file_list_spec$func_to_tool_file_result
func_append delfiles " $output"
func_verbose "creating $NM input file list: $output"
for obj in $save_libobjs; do
func_to_tool_file "$obj"
$ECHO "$func_to_tool_file_result"
done > "$output"
eval cmd=\"$cmd1\"
func_show_eval "$cmd" 'exit $?'
output=$save_output
libobjs=$save_libobjs
skipped_export=false
else
# The command line is too long to execute in one step.
func_verbose "using reloadable object file for export list..."
skipped_export=:
# Break out early, otherwise skipped_export may be
# set to false by a later but shorter cmd.
break
fi
done
IFS=$save_ifs
if test -n "$export_symbols_regex" && test : != "$skipped_export"; then
func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
fi
fi
fi
if test -n "$export_symbols" && test -n "$include_expsyms"; then
tmp_export_symbols=$export_symbols
test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
$opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
# 's' commands, which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
$opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
func_append delfiles " $export_symbols $output_objdir/$libname.filter"
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
fi
tmp_deplibs=
for test_deplib in $deplibs; do
case " $convenience " in
*" $test_deplib "*) ;;
*)
func_append tmp_deplibs " $test_deplib"
;;
esac
done
deplibs=$tmp_deplibs
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec" &&
test yes = "$compiler_needs_object" &&
test -z "$libobjs"; then
# extract the archives, so we have objects to list.
# TODO: could optimize this to just extract one archive.
whole_archive_flag_spec=
fi
if test -n "$whole_archive_flag_spec"; then
save_libobjs=$libobjs
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
test "X$libobjs" = "X " && libobjs=
else
gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $convenience
func_append libobjs " $func_extract_archives_result"
test "X$libobjs" = "X " && libobjs=
fi
fi
if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
func_append linker_flags " $flag"
fi
# Make a backup of the uninstalled library when relinking
if test relink = "$opt_mode"; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
fi
# Do each of the archive commands.
if test yes = "$module" && test -n "$module_cmds"; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
eval test_cmds=\"$module_expsym_cmds\"
cmds=$module_expsym_cmds
else
eval test_cmds=\"$module_cmds\"
cmds=$module_cmds
fi
else
if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
eval test_cmds=\"$archive_expsym_cmds\"
cmds=$archive_expsym_cmds
else
eval test_cmds=\"$archive_cmds\"
cmds=$archive_cmds
fi
fi
if test : != "$skipped_export" &&
func_len " $test_cmds" &&
len=$func_len_result &&
test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
:
else
# The command line is too long to link in one step, link piecewise
# or, if using GNU ld and skipped_export is not :, use a linker
# script.
# Save the value of $output and $libobjs because we want to
# use them later. If we have whole_archive_flag_spec, we
# want to use save_libobjs as it was before
# whole_archive_flag_spec was expanded, because we can't
# assume the linker understands whole_archive_flag_spec.
# This may have to be revisited, in case too many
# convenience libraries get linked in and end up exceeding
# the spec.
if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
save_libobjs=$libobjs
fi
save_output=$output
func_basename "$output"
output_la=$func_basename_result
# Clear the reloadable object creation command queue and
# initialize k to one.
test_cmds=
concat_cmds=
objlist=
last_robj=
k=1
if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then
output=$output_objdir/$output_la.lnkscript
func_verbose "creating GNU ld script: $output"
echo 'INPUT (' > $output
for obj in $save_libobjs
do
func_to_tool_file "$obj"
$ECHO "$func_to_tool_file_result" >> $output
done
echo ')' >> $output
func_append delfiles " $output"
func_to_tool_file "$output"
output=$func_to_tool_file_result
elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then
output=$output_objdir/$output_la.lnk
func_verbose "creating linker input file list: $output"
: > $output
set x $save_libobjs
shift
firstobj=
if test yes = "$compiler_needs_object"; then
firstobj="$1 "
shift
fi
for obj
do
func_to_tool_file "$obj"
$ECHO "$func_to_tool_file_result" >> $output
done
func_append delfiles " $output"
func_to_tool_file "$output"
output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
else
if test -n "$save_libobjs"; then
func_verbose "creating reloadable object files..."
output=$output_objdir/$output_la-$k.$objext
eval test_cmds=\"$reload_cmds\"
func_len " $test_cmds"
len0=$func_len_result
len=$len0
# Loop over the list of objects to be linked.
for obj in $save_libobjs
do
func_len " $obj"
func_arith $len + $func_len_result
len=$func_arith_result
if test -z "$objlist" ||
test "$len" -lt "$max_cmd_len"; then
func_append objlist " $obj"
else
# The command $test_cmds is almost too long, add a
# command to the queue.
if test 1 -eq "$k"; then
# The first file doesn't have a previous command to add.
reload_objs=$objlist
eval concat_cmds=\"$reload_cmds\"
else
# All subsequent reloadable object files will link in
# the last one created.
reload_objs="$objlist $last_robj"
eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
fi
last_robj=$output_objdir/$output_la-$k.$objext
func_arith $k + 1
k=$func_arith_result
output=$output_objdir/$output_la-$k.$objext
objlist=" $obj"
func_len " $last_robj"
func_arith $len0 + $func_len_result
len=$func_arith_result
fi
done
# Handle the remaining objects by creating one last
# reloadable object file. All subsequent reloadable object
# files will link in the last one created.
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
reload_objs="$objlist $last_robj"
eval concat_cmds=\"\$concat_cmds$reload_cmds\"
if test -n "$last_robj"; then
eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
fi
func_append delfiles " $output"
else
output=
fi
${skipped_export-false} && {
func_verbose "generating symbol list for '$libname.la'"
export_symbols=$output_objdir/$libname.exp
$opt_dry_run || $RM $export_symbols
libobjs=$output
# Append the command to create the export file.
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
if test -n "$last_robj"; then
eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
fi
}
test -n "$save_libobjs" &&
func_verbose "creating a temporary reloadable object file: $output"
# Loop through the commands generated above and execute them.
save_ifs=$IFS; IFS='~'
for cmd in $concat_cmds; do
IFS=$save_ifs
$opt_quiet || {
func_quote_arg expand,pretty "$cmd"
eval "func_echo $func_quote_arg_result"
}
$opt_dry_run || eval "$cmd" || {
lt_exit=$?
# Restore the uninstalled library and exit
if test relink = "$opt_mode"; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
fi
exit $lt_exit
}
done
IFS=$save_ifs
if test -n "$export_symbols_regex" && ${skipped_export-false}; then
func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
fi
fi
${skipped_export-false} && {
if test -n "$export_symbols" && test -n "$include_expsyms"; then
tmp_export_symbols=$export_symbols
test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
$opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
if test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
# 's' commands, which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
$opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
func_append delfiles " $export_symbols $output_objdir/$libname.filter"
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
fi
}
libobjs=$output
# Restore the value of output.
output=$save_output
if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
test "X$libobjs" = "X " && libobjs=
fi
# Expand the library linking commands again to reset the
# value of $libobjs for piecewise linking.
# Do each of the archive commands.
if test yes = "$module" && test -n "$module_cmds"; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
cmds=$module_expsym_cmds
else
cmds=$module_cmds
fi
else
if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
cmds=$archive_expsym_cmds
else
cmds=$archive_cmds
fi
fi
fi
if test -n "$delfiles"; then
# Append the command to remove temporary files to $cmds.
eval cmds=\"\$cmds~\$RM $delfiles\"
fi
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
func_append libobjs " $func_extract_archives_result"
test "X$libobjs" = "X " && libobjs=
fi
save_ifs=$IFS; IFS='~'
for cmd in $cmds; do
IFS=$sp$nl
eval cmd=\"$cmd\"
IFS=$save_ifs
$opt_quiet || {
func_quote_arg expand,pretty "$cmd"
eval "func_echo $func_quote_arg_result"
}
$opt_dry_run || eval "$cmd" || {
lt_exit=$?
# Restore the uninstalled library and exit
if test relink = "$opt_mode"; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
fi
exit $lt_exit
}
done
IFS=$save_ifs
# Restore the uninstalled library and exit
if test relink = "$opt_mode"; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
if test -n "$convenience"; then
if test -z "$whole_archive_flag_spec"; then
func_show_eval '${RM}r "$gentop"'
fi
fi
exit $EXIT_SUCCESS
fi
# Create links to the real library.
for linkname in $linknames; do
if test "$realname" != "$linkname"; then
func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
fi
done
# If -module or -export-dynamic was specified, set the dlname.
if test yes = "$module" || test yes = "$export_dynamic"; then
# On all known operating systems, these are identical.
dlname=$soname
fi
fi
;;
obj)
if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
func_warning "'-dlopen' is ignored for objects"
fi
case " $deplibs" in
*\ -l* | *\ -L*)
func_warning "'-l' and '-L' are ignored for objects" ;;
esac
test -n "$rpath" && \
func_warning "'-rpath' is ignored for objects"
test -n "$xrpath" && \
func_warning "'-R' is ignored for objects"
test -n "$vinfo" && \
func_warning "'-version-info' is ignored for objects"
test -n "$release" && \
func_warning "'-release' is ignored for objects"
case $output in
*.lo)
test -n "$objs$old_deplibs" && \
func_fatal_error "cannot build library object '$output' from non-libtool objects"
libobj=$output
func_lo2o "$libobj"
obj=$func_lo2o_result
;;
*)
libobj=
obj=$output
;;
esac
# Delete the old objects.
$opt_dry_run || $RM $obj $libobj
# Objects from convenience libraries. This assumes
# single-version convenience libraries. Whenever we create
# different ones for PIC/non-PIC, this we'll have to duplicate
# the extraction.
reload_conv_objs=
gentop=
# if reload_cmds runs $LD directly, get rid of -Wl from
# whole_archive_flag_spec and hope we can get by with turning comma
# into space.
case $reload_cmds in
*\$LD[\ \$]*) wl= ;;
esac
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
else
gentop=$output_objdir/${obj}x
func_append generated " $gentop"
func_extract_archives $gentop $convenience
reload_conv_objs="$reload_objs $func_extract_archives_result"
fi
fi
# If we're not building shared, we need to use non_pic_objs
test yes = "$build_libtool_libs" || libobjs=$non_pic_objects
# Create the old-style object.
reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
output=$obj
func_execute_cmds "$reload_cmds" 'exit $?'
# Exit if we aren't doing a library object file.
if test -z "$libobj"; then
if test -n "$gentop"; then
func_show_eval '${RM}r "$gentop"'
fi
exit $EXIT_SUCCESS
fi
test yes = "$build_libtool_libs" || {
if test -n "$gentop"; then
func_show_eval '${RM}r "$gentop"'
fi
# Create an invalid libtool object if no PIC, so that we don't
# accidentally link it into a program.
# $show "echo timestamp > $libobj"
# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
exit $EXIT_SUCCESS
}
if test -n "$pic_flag" || test default != "$pic_mode"; then
# Only do commands if we really have different PIC objects.
reload_objs="$libobjs $reload_conv_objs"
output=$libobj
func_execute_cmds "$reload_cmds" 'exit $?'
fi
if test -n "$gentop"; then
func_show_eval '${RM}r "$gentop"'
fi
exit $EXIT_SUCCESS
;;
prog)
case $host in
*cygwin*) func_stripname '' '.exe' "$output"
output=$func_stripname_result.exe;;
esac
test -n "$vinfo" && \
func_warning "'-version-info' is ignored for programs"
test -n "$release" && \
func_warning "'-release' is ignored for programs"
$preload \
&& test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \
&& func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support."
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
# On Rhapsody replace the C library is the System framework
compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
;;
esac
case $host in
*-*-darwin*)
# Don't allow lazy linking, it breaks C++ global constructors
# But is supposedly fixed on 10.4 or later (yay!).
if test CXX = "$tagname"; then
case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
10.[0123])
func_append compile_command " $wl-bind_at_load"
func_append finalize_command " $wl-bind_at_load"
;;
esac
fi
# Time to change all our "foo.ltframework" stuff back to "-framework foo"
compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
;;
esac
# move library search paths that coincide with paths to not yet
# installed libraries to the beginning of the library search list
new_libs=
for path in $notinst_path; do
case " $new_libs " in
*" -L$path/$objdir "*) ;;
*)
case " $compile_deplibs " in
*" -L$path/$objdir "*)
func_append new_libs " -L$path/$objdir" ;;
esac
;;
esac
done
for deplib in $compile_deplibs; do
case $deplib in
-L*)
case " $new_libs " in
*" $deplib "*) ;;
*) func_append new_libs " $deplib" ;;
esac
;;
*) func_append new_libs " $deplib" ;;
esac
done
compile_deplibs=$new_libs
func_append compile_command " $compile_deplibs"
func_append finalize_command " $finalize_deplibs"
if test -n "$rpath$xrpath"; then
# If the user specified any rpath flags, then add them.
for libdir in $rpath $xrpath; do
# This is the magic to use -rpath.
case "$finalize_rpath " in
*" $libdir "*) ;;
*) func_append finalize_rpath " $libdir" ;;
esac
done
fi
# Now hardcode the library paths
rpath=
hardcode_libdirs=
for libdir in $compile_rpath $finalize_rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
func_append rpath " $flag"
fi
elif test -n "$runpath_var"; then
case "$perm_rpath " in
*" $libdir "*) ;;
*) func_append perm_rpath " $libdir" ;;
esac
fi
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$libdir:"*) ;;
::) dllsearchpath=$libdir;;
*) func_append dllsearchpath ":$libdir";;
esac
case :$dllsearchpath: in
*":$testbindir:"*) ;;
::) dllsearchpath=$testbindir;;
*) func_append dllsearchpath ":$testbindir";;
esac
;;
esac
done
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
libdir=$hardcode_libdirs
eval rpath=\" $hardcode_libdir_flag_spec\"
fi
compile_rpath=$rpath
rpath=
hardcode_libdirs=
for libdir in $finalize_rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
func_append rpath " $flag"
fi
elif test -n "$runpath_var"; then
case "$finalize_perm_rpath " in
*" $libdir "*) ;;
*) func_append finalize_perm_rpath " $libdir" ;;
esac
fi
done
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
libdir=$hardcode_libdirs
eval rpath=\" $hardcode_libdir_flag_spec\"
fi
finalize_rpath=$rpath
if test -n "$libobjs" && test yes = "$build_old_libs"; then
# Transform all the library objects into standard objects.
compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
fi
func_generate_dlsyms "$outputname" "@PROGRAM@" false
# template prelinking step
if test -n "$prelink_cmds"; then
func_execute_cmds "$prelink_cmds" 'exit $?'
fi
wrappers_required=:
case $host in
*cegcc* | *mingw32ce*)
# Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
wrappers_required=false
;;
*cygwin* | *mingw* )
test yes = "$build_libtool_libs" || wrappers_required=false
;;
*)
if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
wrappers_required=false
fi
;;
esac
$wrappers_required || {
# Replace the output file specification.
compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
link_command=$compile_command$compile_rpath
# We have no uninstalled library dependencies, so finalize right now.
exit_status=0
func_show_eval "$link_command" 'exit_status=$?'
if test -n "$postlink_cmds"; then
func_to_tool_file "$output"
postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
func_execute_cmds "$postlink_cmds" 'exit $?'
fi
# Delete the generated files.
if test -f "$output_objdir/${outputname}S.$objext"; then
func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
fi
exit $exit_status
}
if test -n "$compile_shlibpath$finalize_shlibpath"; then
compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
fi
if test -n "$finalize_shlibpath"; then
finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
fi
compile_var=
finalize_var=
if test -n "$runpath_var"; then
if test -n "$perm_rpath"; then
# We should set the runpath_var.
rpath=
for dir in $perm_rpath; do
func_append rpath "$dir:"
done
compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
fi
if test -n "$finalize_perm_rpath"; then
# We should set the runpath_var.
rpath=
for dir in $finalize_perm_rpath; do
func_append rpath "$dir:"
done
finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
fi
fi
if test yes = "$no_install"; then
# We don't need to create a wrapper script.
link_command=$compile_var$compile_command$compile_rpath
# Replace the output file specification.
link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
# Delete the old output file.
$opt_dry_run || $RM $output
# Link the executable and exit
func_show_eval "$link_command" 'exit $?'
if test -n "$postlink_cmds"; then
func_to_tool_file "$output"
postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
func_execute_cmds "$postlink_cmds" 'exit $?'
fi
exit $EXIT_SUCCESS
fi
case $hardcode_action,$fast_install in
relink,*)
# Fast installation is not supported
link_command=$compile_var$compile_command$compile_rpath
relink_command=$finalize_var$finalize_command$finalize_rpath
func_warning "this platform does not like uninstalled shared libraries"
func_warning "'$output' will be relinked during installation"
;;
*,yes)
link_command=$finalize_var$compile_command$finalize_rpath
relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
;;
*,no)
link_command=$compile_var$compile_command$compile_rpath
relink_command=$finalize_var$finalize_command$finalize_rpath
;;
*,needless)
link_command=$finalize_var$compile_command$finalize_rpath
relink_command=
;;
esac
# Replace the output file specification.
link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
# Delete the old output files.
$opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
func_show_eval "$link_command" 'exit $?'
if test -n "$postlink_cmds"; then
func_to_tool_file "$output_objdir/$outputname"
postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
func_execute_cmds "$postlink_cmds" 'exit $?'
fi
# Now create the wrapper script.
func_verbose "creating $output"
# Quote the relink command for shipping.
if test -n "$relink_command"; then
# Preserve any variables that may affect compiler behavior
for var in $variables_saved_for_relink; do
if eval test -z \"\${$var+set}\"; then
relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
elif eval var_value=\$$var; test -z "$var_value"; then
relink_command="$var=; export $var; $relink_command"
else
func_quote_arg pretty "$var_value"
relink_command="$var=$func_quote_arg_result; export $var; $relink_command"
fi
done
func_quote eval cd "`pwd`"
func_quote_arg pretty,unquoted "($func_quote_result; $relink_command)"
relink_command=$func_quote_arg_unquoted_result
fi
# Only actually do things if not in dry run mode.
$opt_dry_run || {
# win32 will think the script is a binary if it has
# a .exe suffix, so we strip it off here.
case $output in
*.exe) func_stripname '' '.exe' "$output"
output=$func_stripname_result ;;
esac
# test for cygwin because mv fails w/o .exe extensions
case $host in
*cygwin*)
exeext=.exe
func_stripname '' '.exe' "$outputname"
outputname=$func_stripname_result ;;
*) exeext= ;;
esac
case $host in
*cygwin* | *mingw* )
func_dirname_and_basename "$output" "" "."
output_name=$func_basename_result
output_path=$func_dirname_result
cwrappersource=$output_path/$objdir/lt-$output_name.c
cwrapper=$output_path/$output_name.exe
$RM $cwrappersource $cwrapper
trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
func_emit_cwrapperexe_src > $cwrappersource
# The wrapper executable is built using the $host compiler,
# because it contains $host paths and files. If cross-
# compiling, it, like the target executable, must be
# executed on the $host or under an emulation environment.
$opt_dry_run || {
$LTCC $LTCFLAGS -o $cwrapper $cwrappersource
$STRIP $cwrapper
}
# Now, create the wrapper script for func_source use:
func_ltwrapper_scriptname $cwrapper
$RM $func_ltwrapper_scriptname_result
trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
$opt_dry_run || {
# note: this script will not be executed, so do not chmod.
if test "x$build" = "x$host"; then
$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
else
func_emit_wrapper no > $func_ltwrapper_scriptname_result
fi
}
;;
* )
$RM $output
trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
func_emit_wrapper no > $output
chmod +x $output
;;
esac
}
exit $EXIT_SUCCESS
;;
esac
# See if we need to build an old-fashioned archive.
for oldlib in $oldlibs; do
case $build_libtool_libs in
convenience)
oldobjs="$libobjs_save $symfileobj"
addlibs=$convenience
build_libtool_libs=no
;;
module)
oldobjs=$libobjs_save
addlibs=$old_convenience
build_libtool_libs=no
;;
*)
oldobjs="$old_deplibs $non_pic_objects"
$preload && test -f "$symfileobj" \
&& func_append oldobjs " $symfileobj"
addlibs=$old_convenience
;;
esac
if test -n "$addlibs"; then
gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $addlibs
func_append oldobjs " $func_extract_archives_result"
fi
# Do each command in the archive commands.
if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then
cmds=$old_archive_from_new_cmds
else
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
func_append oldobjs " $func_extract_archives_result"
fi
# POSIX demands no paths to be encoded in archives. We have
# to avoid creating archives with duplicate basenames if we
# might have to extract them afterwards, e.g., when creating a
# static archive out of a convenience library, or when linking
# the entirety of a libtool archive into another (currently
# not supported by libtool).
if (for obj in $oldobjs
do
func_basename "$obj"
$ECHO "$func_basename_result"
done | sort | sort -uc >/dev/null 2>&1); then
:
else
echo "copying selected object files to avoid basename conflicts..."
gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_mkdir_p "$gentop"
save_oldobjs=$oldobjs
oldobjs=
counter=1
for obj in $save_oldobjs
do
func_basename "$obj"
objbase=$func_basename_result
case " $oldobjs " in
" ") oldobjs=$obj ;;
*[\ /]"$objbase "*)
while :; do
# Make sure we don't pick an alternate name that also
# overlaps.
newobj=lt$counter-$objbase
func_arith $counter + 1
counter=$func_arith_result
case " $oldobjs " in
*[\ /]"$newobj "*) ;;
*) if test ! -f "$gentop/$newobj"; then break; fi ;;
esac
done
func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
func_append oldobjs " $gentop/$newobj"
;;
*) func_append oldobjs " $obj" ;;
esac
done
fi
func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
tool_oldlib=$func_to_tool_file_result
eval cmds=\"$old_archive_cmds\"
func_len " $cmds"
len=$func_len_result
if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
cmds=$old_archive_cmds
elif test -n "$archiver_list_spec"; then
func_verbose "using command file archive linking..."
for obj in $oldobjs
do
func_to_tool_file "$obj"
$ECHO "$func_to_tool_file_result"
done > $output_objdir/$libname.libcmd
func_to_tool_file "$output_objdir/$libname.libcmd"
oldobjs=" $archiver_list_spec$func_to_tool_file_result"
cmds=$old_archive_cmds
else
# the command line is too long to link in one step, link in parts
func_verbose "using piecewise archive linking..."
save_RANLIB=$RANLIB
RANLIB=:
objlist=
concat_cmds=
save_oldobjs=$oldobjs
oldobjs=
# Is there a better way of finding the last object in the list?
for obj in $save_oldobjs
do
last_oldobj=$obj
done
eval test_cmds=\"$old_archive_cmds\"
func_len " $test_cmds"
len0=$func_len_result
len=$len0
for obj in $save_oldobjs
do
func_len " $obj"
func_arith $len + $func_len_result
len=$func_arith_result
func_append objlist " $obj"
if test "$len" -lt "$max_cmd_len"; then
:
else
# the above command should be used before it gets too long
oldobjs=$objlist
if test "$obj" = "$last_oldobj"; then
RANLIB=$save_RANLIB
fi
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
objlist=
len=$len0
fi
done
RANLIB=$save_RANLIB
oldobjs=$objlist
if test -z "$oldobjs"; then
eval cmds=\"\$concat_cmds\"
else
eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
fi
fi
fi
func_execute_cmds "$cmds" 'exit $?'
done
test -n "$generated" && \
func_show_eval "${RM}r$generated"
# Now create the libtool archive.
case $output in
*.la)
old_library=
test yes = "$build_old_libs" && old_library=$libname.$libext
func_verbose "creating $output"
# Preserve any variables that may affect compiler behavior
for var in $variables_saved_for_relink; do
if eval test -z \"\${$var+set}\"; then
relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
elif eval var_value=\$$var; test -z "$var_value"; then
relink_command="$var=; export $var; $relink_command"
else
func_quote_arg pretty,unquoted "$var_value"
relink_command="$var=$func_quote_arg_unquoted_result; export $var; $relink_command"
fi
done
# Quote the link command for shipping.
func_quote eval cd "`pwd`"
relink_command="($func_quote_result; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
func_quote_arg pretty,unquoted "$relink_command"
relink_command=$func_quote_arg_unquoted_result
if test yes = "$hardcode_automatic"; then
relink_command=
fi
# Only create the output if not a dry run.
$opt_dry_run || {
for installed in no yes; do
if test yes = "$installed"; then
if test -z "$install_libdir"; then
break
fi
output=$output_objdir/${outputname}i
# Replace all uninstalled libtool libraries with the installed ones
newdependency_libs=
for deplib in $dependency_libs; do
case $deplib in
*.la)
func_basename "$deplib"
name=$func_basename_result
func_resolve_sysroot "$deplib"
eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
test -z "$libdir" && \
func_fatal_error "'$deplib' is not a valid libtool archive"
func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
;;
-L*)
func_stripname -L '' "$deplib"
func_replace_sysroot "$func_stripname_result"
func_append newdependency_libs " -L$func_replace_sysroot_result"
;;
-R*)
func_stripname -R '' "$deplib"
func_replace_sysroot "$func_stripname_result"
func_append newdependency_libs " -R$func_replace_sysroot_result"
;;
*) func_append newdependency_libs " $deplib" ;;
esac
done
dependency_libs=$newdependency_libs
newdlfiles=
for lib in $dlfiles; do
case $lib in
*.la)
func_basename "$lib"
name=$func_basename_result
eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
func_fatal_error "'$lib' is not a valid libtool archive"
func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
;;
*) func_append newdlfiles " $lib" ;;
esac
done
dlfiles=$newdlfiles
newdlprefiles=
for lib in $dlprefiles; do
case $lib in
*.la)
# Only pass preopened files to the pseudo-archive (for
# eventual linking with the app. that links it) if we
# didn't already link the preopened objects directly into
# the library:
func_basename "$lib"
name=$func_basename_result
eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
func_fatal_error "'$lib' is not a valid libtool archive"
func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
;;
esac
done
dlprefiles=$newdlprefiles
else
newdlfiles=
for lib in $dlfiles; do
case $lib in
[\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
*) abs=`pwd`"/$lib" ;;
esac
func_append newdlfiles " $abs"
done
dlfiles=$newdlfiles
newdlprefiles=
for lib in $dlprefiles; do
case $lib in
[\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
*) abs=`pwd`"/$lib" ;;
esac
func_append newdlprefiles " $abs"
done
dlprefiles=$newdlprefiles
fi
$RM $output
# place dlname in correct position for cygwin
# In fact, it would be nice if we could use this code for all target
# systems that can't hard-code library paths into their executables
# and that have no shared library path variable independent of PATH,
# but it turns out we can't easily determine that from inspecting
# libtool variables, so we have to hard-code the OSs to which it
# applies here; at the moment, that means platforms that use the PE
# object format with DLL files. See the long comment at the top of
# tests/bindir.at for full details.
tdlname=$dlname
case $host,$output,$installed,$module,$dlname in
*cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
# If a -bindir argument was supplied, place the dll there.
if test -n "$bindir"; then
func_relative_path "$install_libdir" "$bindir"
tdlname=$func_relative_path_result/$dlname
else
# Otherwise fall back on heuristic.
tdlname=../bin/$dlname
fi
;;
esac
$ECHO > $output "\
# $outputname - a libtool library file
# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
# The name that we can dlopen(3).
dlname='$tdlname'
# Names of this library.
library_names='$library_names'
# The name of the static archive.
old_library='$old_library'
# Linker flags that cannot go in dependency_libs.
inherited_linker_flags='$new_inherited_linker_flags'
# Libraries that this one depends upon.
dependency_libs='$dependency_libs'
# Names of additional weak libraries provided by this library
weak_library_names='$weak_libs'
# Version information for $libname.
current=$current
age=$age
revision=$revision
# Is this an already installed library?
installed=$installed
# Should we warn about portability when linking against -modules?
shouldnotlink=$module
# Files to dlopen/dlpreopen
dlopen='$dlfiles'
dlpreopen='$dlprefiles'
# Directory that this library needs to be installed in:
libdir='$install_libdir'"
if test no,yes = "$installed,$need_relink"; then
$ECHO >> $output "\
relink_command=\"$relink_command\""
fi
done
}
# Do a symbolic link so that the libtool archive can be found in
# LD_LIBRARY_PATH before the program is installed.
func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
;;
esac
exit $EXIT_SUCCESS
}
if test link = "$opt_mode" || test relink = "$opt_mode"; then
func_mode_link ${1+"$@"}
fi
# func_mode_uninstall arg...
func_mode_uninstall ()
{
$debug_cmd
RM=$nonopt
files=
rmforce=false
exit_status=0
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
libtool_install_magic=$magic
for arg
do
case $arg in
-f) func_append RM " $arg"; rmforce=: ;;
-*) func_append RM " $arg" ;;
*) func_append files " $arg" ;;
esac
done
test -z "$RM" && \
func_fatal_help "you must specify an RM program"
rmdirs=
for file in $files; do
func_dirname "$file" "" "."
dir=$func_dirname_result
if test . = "$dir"; then
odir=$objdir
else
odir=$dir/$objdir
fi
func_basename "$file"
name=$func_basename_result
test uninstall = "$opt_mode" && odir=$dir
# Remember odir for removal later, being careful to avoid duplicates
if test clean = "$opt_mode"; then
case " $rmdirs " in
*" $odir "*) ;;
*) func_append rmdirs " $odir" ;;
esac
fi
# Don't error if the file doesn't exist and rm -f was used.
if { test -L "$file"; } >/dev/null 2>&1 ||
{ test -h "$file"; } >/dev/null 2>&1 ||
test -f "$file"; then
:
elif test -d "$file"; then
exit_status=1
continue
elif $rmforce; then
continue
fi
rmfiles=$file
case $name in
*.la)
# Possibly a libtool archive, so verify it.
if func_lalib_p "$file"; then
func_source $dir/$name
# Delete the libtool libraries and symlinks.
for n in $library_names; do
func_append rmfiles " $odir/$n"
done
test -n "$old_library" && func_append rmfiles " $odir/$old_library"
case $opt_mode in
clean)
case " $library_names " in
*" $dlname "*) ;;
*) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
esac
test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
;;
uninstall)
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1'
fi
if test -n "$old_library"; then
# Do each command in the old_postuninstall commands.
func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1'
fi
# FIXME: should reinstall the best remaining shared library.
;;
esac
fi
;;
*.lo)
# Possibly a libtool object, so verify it.
if func_lalib_p "$file"; then
# Read the .lo file
func_source $dir/$name
# Add PIC object to the list of files to remove.
if test -n "$pic_object" && test none != "$pic_object"; then
func_append rmfiles " $dir/$pic_object"
fi
# Add non-PIC object to the list of files to remove.
if test -n "$non_pic_object" && test none != "$non_pic_object"; then
func_append rmfiles " $dir/$non_pic_object"
fi
fi
;;
*)
if test clean = "$opt_mode"; then
noexename=$name
case $file in
*.exe)
func_stripname '' '.exe' "$file"
file=$func_stripname_result
func_stripname '' '.exe' "$name"
noexename=$func_stripname_result
# $file with .exe has already been added to rmfiles,
# add $file without .exe
func_append rmfiles " $file"
;;
esac
# Do a test to see if this is a libtool program.
if func_ltwrapper_p "$file"; then
if func_ltwrapper_executable_p "$file"; then
func_ltwrapper_scriptname "$file"
relink_command=
func_source $func_ltwrapper_scriptname_result
func_append rmfiles " $func_ltwrapper_scriptname_result"
else
relink_command=
func_source $dir/$noexename
fi
# note $name still contains .exe if it was in $file originally
# as does the version of $file that was added into $rmfiles
func_append rmfiles " $odir/$name $odir/${name}S.$objext"
if test yes = "$fast_install" && test -n "$relink_command"; then
func_append rmfiles " $odir/lt-$name"
fi
if test "X$noexename" != "X$name"; then
func_append rmfiles " $odir/lt-$noexename.c"
fi
fi
fi
;;
esac
func_show_eval "$RM $rmfiles" 'exit_status=1'
done
# Try to remove the $objdir's in the directories where we deleted files
for dir in $rmdirs; do
if test -d "$dir"; then
func_show_eval "rmdir $dir >/dev/null 2>&1"
fi
done
exit $exit_status
}
if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
func_mode_uninstall ${1+"$@"}
fi
test -z "$opt_mode" && {
help=$generic_help
func_fatal_help "you must specify a MODE"
}
test -z "$exec_cmd" && \
func_fatal_help "invalid operation mode '$opt_mode'"
if test -n "$exec_cmd"; then
eval exec "$exec_cmd"
exit $EXIT_FAILURE
fi
exit $exit_status
# The TAGs below are defined such that we never get into a situation
# where we disable both kinds of libraries. Given conflicting
# choices, we go for a static library, that is the most portable,
# since we can't tell whether shared libraries were disabled because
# the user asked for that or because the platform doesn't support
# them. This is particularly important on AIX, because we don't
# support having both static and shared libraries enabled at the same
# time on that platform, so we default to a shared-only configuration.
# If a disable-shared tag is given, we'll fallback to a static-only
# configuration. But we'll never go from static-only to shared-only.
# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
build_libtool_libs=no
build_old_libs=yes
# ### END LIBTOOL TAG CONFIG: disable-shared
# ### BEGIN LIBTOOL TAG CONFIG: disable-static
build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
# ### END LIBTOOL TAG CONFIG: disable-static
# Local Variables:
# mode:shell-script
# sh-indentation:2
# End:
lcmaps-plugins-jobrep-1.5.7/BUGS 0000644 0001750 0000144 00000001135 14574533172 013354 0000000 0000000 The plugin assumes the SQLRowCount() will return the total number of rows.
For drivers that use server-side cursors and/or when the resultset is large this
assumption can be wrong. For more information, see the API doc for
SQLRowCount():
http://msdn.microsoft.com/en-us/library/windows/desktop/ms711835%28v=vs.85%29.aspx
There are currently no other known bugs.
If you've encoutered a problem, please provide us with feedback.
Consider the following ways of contacting us:
- Filing a GGUS ticket to gLite security
- Filing A bugzilla.nikhef.nl ticket
- An email to: grid-mw-security-support@nikhef.nl
lcmaps-plugins-jobrep-1.5.7/README 0000644 0001750 0000144 00000003443 14574533172 013555 0000000 0000000 Date: August 31, 2012
Author: Oscar Koeroo
README for the LCMAPS Jobrepository plug-in
===========================================
The LCMAPS Jobrepository plug-in stores credentials and the resulting account
mappings into a relational database. This plugin will link up all the known
in-process information from LCMAPS core memory and stores it in a database. This
plug-in uses ODBC (http://en.wikipedia.org/wiki/ODBC) to connect to the
database.
The current state of the mappings between various credentials and Unix accounts
is stored in an open database on disk, but this information can change over
time through (regular) system administrative interventions. This state is now
preserved in a relational database with the added benefit of being accessible
by other systems, e.g. GridSAFE and build-up an easy to backup historic view on
the mapping state.
Quite some systems seem to dig up data by trawling log files, e.g. to construct
accounting data records. This method is subjected to the settings of the
sub-systems which control the format of the log file output. Log trawling tools
are interacting with the log files as a glorified API. This lowers the ability
for tools, e.g. LCMAPS, to alter their log output. By offering the LCMAPS
Jobrepository plug-in as an alternative with the added benefit of offering
the data in a structured fine-grained database with the ability of an
historic view the intend is to avoid the need and/or requirement for log
file trawling.
.SH DATABASE SCHEMA EXTENSIONS
The schema can be used to link up account mapping and/or credential mapping
results originating from other credential types and link up more fine grained
details from the specific work environment, i.e. a Gatekeeper and GridFTPd will
be able to add service specific information together with the mapping results.
lcmaps-plugins-jobrep-1.5.7/ChangeLog 0000644 0001750 0000144 00000260436 14574533163 014456 0000000 0000000 ------------------------------------------------------------------------
r18917 | msalle | 2024-03-13 16:38:45 +0100 (Wed, 13 Mar 2024) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep
Update externals URL
------------------------------------------------------------------------
r18689 | msalle | 2016-08-02 16:40:35 +0200 (Tue, 02 Aug 2016) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/NEWS
M /trunk/lcmaps-plugins-scas-client/NEWS
M /trunk/scas/NEWS
Updating NEWS files to reflect OpenSSL-1.1 API fixes
------------------------------------------------------------------------
r18686 | msalle | 2016-08-02 13:20:20 +0200 (Tue, 02 Aug 2016) | 4 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_test.c
Replace deprecated (in particular i2c_ASN1_INTEGER) serial number to string code
with code from verify-proxy.
Add at least one missing header plus patch namechange in jobrep_test.c
------------------------------------------------------------------------
r18522 | msalle | 2015-07-22 12:37:00 +0200 (Wed, 22 Jul 2015) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/NEWS
M /trunk/lcmaps-plugins-jobrep/doc/Makefile.am
Update NEWS file for cleanup
------------------------------------------------------------------------
r18520 | msalle | 2015-07-22 12:23:47 +0200 (Wed, 22 Jul 2015) | 4 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/Makefile.am
R /trunk/lcmaps-plugins-jobrep/doc/Makefile.am
A /trunk/lcmaps-plugins-jobrep/doc/jr
A /trunk/lcmaps-plugins-jobrep/doc/jr/Makefile.am (from /trunk/lcmaps-plugins-jobrep/doc/Makefile.am:18507)
A /trunk/lcmaps-plugins-jobrep/doc/jr/jr.tex (from /trunk/lcmaps-plugins-jobrep/doc/jr.tex:18507)
A /trunk/lcmaps-plugins-jobrep/doc/jr/jr_include.tex (from /trunk/lcmaps-plugins-jobrep/doc/jr_include.tex:18507)
D /trunk/lcmaps-plugins-jobrep/doc/jr.tex
D /trunk/lcmaps-plugins-jobrep/doc/jr_include.tex
Cleanup creation and packaging of docs and man pages. Move unbuild jr to a
subdir and run make inside the doc dir: in that case we don't need to manually
inform that we need to package the .in files.
------------------------------------------------------------------------
r18519 | msalle | 2015-07-22 10:58:14 +0200 (Wed, 22 Jul 2015) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/Makefile.am
Remove mans from EXTRA_DIST, autotools should sort out
------------------------------------------------------------------------
r18518 | msalle | 2015-07-22 10:44:46 +0200 (Wed, 22 Jul 2015) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/NEWS
M /trunk/lcmaps-plugins-jobrep/configure.ac
D /trunk/lcmaps-plugins-jobrep/doc/jobrep-admin.8
A /trunk/lcmaps-plugins-jobrep/doc/jobrep-admin.8.in (from /trunk/lcmaps-plugins-jobrep/doc/jobrep-admin.8:18507)
D /trunk/lcmaps-plugins-jobrep/doc/lcmaps_jobrep.mod.8
A /trunk/lcmaps-plugins-jobrep/doc/lcmaps_jobrep.mod.8.in (from /trunk/lcmaps-plugins-jobrep/doc/lcmaps_jobrep.mod.8:18507)
Cleanup man-page
------------------------------------------------------------------------
r18507 | msalle | 2015-07-21 13:59:11 +0200 (Tue, 21 Jul 2015) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-c-pep/ChangeLog
M /trunk/lcmaps-plugins-jobrep/ChangeLog
M /trunk/lcmaps-plugins-tracking-groupid/ChangeLog
Update ChangeLog for release
------------------------------------------------------------------------
r18506 | msalle | 2015-07-21 13:58:39 +0200 (Tue, 21 Jul 2015) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
Comment out use-less NULL-ifying of local variables.
------------------------------------------------------------------------
r18379 | msalle | 2015-04-22 17:07:23 +0200 (Wed, 22 Apr 2015) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/NEWS
M /trunk/lcmaps-plugins-jobrep/configure.ac
Update version
------------------------------------------------------------------------
r18352 | msalle | 2015-04-16 14:37:44 +0200 (Thu, 16 Apr 2015) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
No need to check for NULL when calling free()
------------------------------------------------------------------------
r18130 | msalle | 2014-12-08 11:45:22 +0100 (Mon, 08 Dec 2014) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-basic/doc/lcmaps_dummy_bad.mod.8
M /trunk/lcmaps-plugins-basic/doc/lcmaps_dummy_good.mod.8
M /trunk/lcmaps-plugins-c-pep/doc/man/lcmaps_plugins_c_pep.8.src
M /trunk/lcmaps-plugins-jobrep/doc/jobrep-admin.8
Fix man page warnings and update wiki url.
------------------------------------------------------------------------
r18078 | msalle | 2014-11-28 09:40:34 +0100 (Fri, 28 Nov 2014) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/LICENSE
LICENSE file incorrectly contained a EMI copyright statement, it's not an EMI
product.
------------------------------------------------------------------------
r17948 | dennisvd | 2014-08-07 18:31:05 +0200 (Thu, 07 Aug 2014) | 2 lines
Changed paths:
M /trunk/glexec/LICENSE
M /trunk/jobrepository/LICENSE
M /trunk/lcas/LICENSE
M /trunk/lcas-plugins-basic/LICENSE
M /trunk/lcas-plugins-check-executable/LICENSE
M /trunk/lcas-plugins-voms/LICENSE
M /trunk/lcmaps-plugins-afs/LICENSE
M /trunk/lcmaps-plugins-basic/LICENSE
M /trunk/lcmaps-plugins-c-pep/LICENSE
M /trunk/lcmaps-plugins-gums/LICENSE
M /trunk/lcmaps-plugins-jobrep/LICENSE
M /trunk/lcmaps-plugins-lcas/LICENSE
M /trunk/lcmaps-plugins-scas-client/LICENSE
M /trunk/lcmaps-plugins-tracking-groupid/LICENSE
M /trunk/lcmaps-plugins-verify-proxy/LICENSE
M /trunk/lcmaps-plugins-voms/LICENSE
M /trunk/scas/LICENSE
Replaced license text with the Apache License 2.0
------------------------------------------------------------------------
r17862 | msalle | 2014-07-09 17:33:46 +0200 (Wed, 09 Jul 2014) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
Fix Wformat warnings
------------------------------------------------------------------------
r17851 | msalle | 2014-07-08 19:23:48 +0200 (Tue, 08 Jul 2014) | 3 lines
Changed paths:
M /trunk/ees/src/main/main.c
M /trunk/glexec/src/main_util.c
M /trunk/lcas-lcmaps-gt4-interface/src/llgt_utils.c
M /trunk/lcmaps/src/pluginmanager/lcmaps_log.c
M /trunk/lcmaps-plugins-afs/src/afs/lcmaps_afs.c
M /trunk/lcmaps-plugins-basic/src/ban_dn/lcmaps_ban_dn.c
M /trunk/lcmaps-plugins-basic/src/dummy/lcmaps_dummy_bad.c
M /trunk/lcmaps-plugins-basic/src/dummy/lcmaps_dummy_good.c
M /trunk/lcmaps-plugins-basic/src/gridlist/lcmaps_gridlist.c
M /trunk/lcmaps-plugins-basic/src/ldap_enf/lcmaps_ldap.c
M /trunk/lcmaps-plugins-basic/src/localaccount/lcmaps_localaccount.c
M /trunk/lcmaps-plugins-basic/src/poolaccount/lcmaps_poolaccount.c
M /trunk/lcmaps-plugins-basic/src/posix_enf/lcmaps_posix.c
M /trunk/lcmaps-plugins-c-pep/src/c-pep/lcmaps_c_pep.c
M /trunk/lcmaps-plugins-c-pep/src/c-pep/pep-c-obligation-handlers.c
M /trunk/lcmaps-plugins-c-pep/src/c-pep/pep-c-obligation-handlers_helpers.c
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
M /trunk/lcmaps-plugins-tracking-groupid/src/tracking_groupid/lcmaps_tracking_groupid.c
M /trunk/lcmaps-plugins-verify-proxy/src/verify-proxy/lcmaps_verify_proxy.c
M /trunk/lcmaps-plugins-verify-proxy/src/verify-proxy/proxylifetime/lcmaps_proxylifetime.c
M /trunk/lcmaps-plugins-voms/src/gridlist/lcmaps_gridlist.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_ban_fqan.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_localaccount.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_localgroup.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_poolaccount.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_poolgroup.c
M /trunk/scas/src/scas-server/logging/scas_log.c
M /trunk/scas/src/scas-server/main.c
Fix compiler warnings resulting from casts, format etc.
------------------------------------------------------------------------
r17670 | msalle | 2014-03-21 12:48:34 +0100 (Fri, 21 Mar 2014) | 2 lines
Changed paths:
M /trunk/lcmaps/ChangeLog
M /trunk/lcmaps-plugins-afs/ChangeLog
M /trunk/lcmaps-plugins-c-pep/ChangeLog
M /trunk/lcmaps-plugins-jobrep/ChangeLog
M /trunk/lcmaps-plugins-scas-client/ChangeLog
A /trunk/saml2-xacml2-c-lib/xacml/ChangeLog
M /trunk/scas/ChangeLog
Updating ChangeLog files, adding ChangeLog file for xacml
------------------------------------------------------------------------
r17624 | msalle | 2014-03-10 15:39:13 +0100 (Mon, 10 Mar 2014) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-basic/configure.ac
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-lcas/configure.ac
M /trunk/lcmaps-plugins-scas-client/configure.ac
M /trunk/lcmaps-plugins-tracking-groupid/configure.ac
M /trunk/lcmaps-plugins-verify-proxy/configure.ac
M /trunk/lcmaps-plugins-voms/configure.ac
Fix typo in reverting the CPPFLAGS
------------------------------------------------------------------------
r17611 | msalle | 2014-03-06 11:38:59 +0100 (Thu, 06 Mar 2014) | 4 lines
Changed paths:
A /trunk/lcmaps-plugins-basic/BUGS
M /trunk/lcmaps-plugins-basic/Makefile.am
M /trunk/lcmaps-plugins-c-pep/BUGS
M /trunk/lcmaps-plugins-jobrep/BUGS
M /trunk/lcmaps-plugins-jobrep/Makefile.am
M /trunk/lcmaps-plugins-lcas/Makefile.am
A /trunk/lcmaps-plugins-tracking-groupid/BUGS
M /trunk/lcmaps-plugins-tracking-groupid/Makefile.am
M /trunk/lcmaps-plugins-verify-proxy/Makefile.am
Add empty BUGS files for lcmaps-plugins-basic and
lcmaps-plugins-tracking-groupid with basic bug filing information.
Make sure BUGS file is packaged and distributed.
------------------------------------------------------------------------
r17547 | msalle | 2014-02-27 14:42:50 +0100 (Thu, 27 Feb 2014) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
C++ comment -> C comment
------------------------------------------------------------------------
r17536 | msalle | 2014-02-27 11:12:15 +0100 (Thu, 27 Feb 2014) | 2 lines
Changed paths:
M /trunk/lcmaps/src/evaluationmanager/pdl.h
M /trunk/lcmaps/src/evaluationmanager/pdl_main.c
M /trunk/lcmaps/src/evaluationmanager/pdl_policy.c
M /trunk/lcmaps/src/evaluationmanager/pdl_rule.h
M /trunk/lcmaps/src/pluginmanager/lcmaps_utils.c
M /trunk/lcmaps-plugins-afs/src/afs/lcmaps_afs.c
M /trunk/lcmaps-plugins-basic/src/gridlist/lcmaps_gridlist.c
M /trunk/lcmaps-plugins-basic/src/ldap_enf/lcmaps_ldap.c
M /trunk/lcmaps-plugins-basic/src/localaccount/lcmaps_localaccount.c
M /trunk/lcmaps-plugins-basic/src/poolaccount/lcmaps_poolaccount.c
M /trunk/lcmaps-plugins-c-pep/src/c-pep/pep-c-interact.c
M /trunk/lcmaps-plugins-c-pep/src/c-pep/pep-c-obligation-handlers.c
M /trunk/lcmaps-plugins-c-pep/src/c-pep/pep-c-obligation-handlers_helpers.c
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
M /trunk/lcmaps-plugins-scas-client/src/saml2-xacml2/io_handler/ssl/ssl-common.c
M /trunk/lcmaps-plugins-scas-client/src/saml2-xacml2/io_handler/xacml_io_ssl.c
M /trunk/lcmaps-plugins-scas-client/src/scas-client/lcmaps_scas_client.c
M /trunk/lcmaps-plugins-verify-proxy/src/verify-proxy/proxylifetime/lcmaps_proxylifetime.c
M /trunk/lcmaps-plugins-verify-proxy/src/verify-proxy/verify-lib/src/verify_x509_utils.c
M /trunk/lcmaps-plugins-verify-proxy/src/verify-proxy/verify-lib/src_internal/_verify_x509.c
M /trunk/lcmaps-plugins-voms/src/gridlist/lcmaps_gridlist.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_localaccount.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_localgroup.c
M /trunk/scas/src/saml2-xacml2/io_handler/ssl/ssl-common.c
M /trunk/scas/src/saml2-xacml2/io_handler/xacml_io_ssl.c
M /trunk/scas/src/saml2-xacml2/server/pdp_xacml_authz_process.c
M /trunk/scas/src/saml2-xacml2/server/pdp_xacml_lcas_lcmaps.c
M /trunk/scas/src/scas-server/logging/scas_log.c
M /trunk/scas/src/scas-server/main.c
Fix GNU/pedantic compiler warnings
------------------------------------------------------------------------
r17522 | msalle | 2014-02-26 12:34:33 +0100 (Wed, 26 Feb 2014) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
Add missing emptyname to other function using it
------------------------------------------------------------------------
r17521 | msalle | 2014-02-26 12:24:08 +0100 (Wed, 26 Feb 2014) | 38 lines
Changed paths:
M /trunk/cgul/environ/environ.c
M /trunk/cgul/fileutil/fileutil.c
M /trunk/lcmaps-plugins-afs/src/afs/lcmaps_afs.c
M /trunk/lcmaps-plugins-c-pep/src/c-pep/lcmaps_c_pep.c
M /trunk/lcmaps-plugins-c-pep/src/c-pep/pep-c-interact.c
M /trunk/lcmaps-plugins-c-pep/src/c-pep/pep-c-interact.h
M /trunk/lcmaps-plugins-c-pep/src/c-pep/pep-c-obligation-handlers.c
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
M /trunk/lcmaps-plugins-scas-client/interface/pep_obligation_handlers.h
M /trunk/lcmaps-plugins-scas-client/src/saml2-xacml2/client/pep_obligation_handlers.c
M /trunk/lcmaps-plugins-scas-client/src/saml2-xacml2/io_handler/network/net_common.c
M /trunk/lcmaps-plugins-scas-client/src/saml2-xacml2/io_handler/ssl/ssl-common.c
M /trunk/lcmaps-plugins-scas-client/src/scas-client/lcmaps_scas_client.c
M /trunk/lcmaps-plugins-verify-proxy/src/verify-proxy/verify-lib/src_internal/_verify_x509.c
M /trunk/lcmaps-plugins-verify-proxy/src/verify-proxy/verify-lib/src_internal/_verify_x509.h
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_localaccount.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_poolaccount.c
Fix clang compiler warnings, in particular uninitialized variables and char*
const char* inconsistencies:
cgul:
- fix harmless uninitialized vars warnings: we checked with a flag in any case
all plugins:
- char * -> const char * for functions where possible and for char* used only as
literals.
c-pep:
- treat pep_error_t properly
- use a strdup for the oh.id since we cannot guarantee they are constant
pepc_initialize() returns number of oh-s so that we can properly clean all
of them.
pepc_initialize() also makes sure that oh is properly initialized and that the
right variable is free-ed (it should have been *oh in the old version, not oh
itself).
- do not log that addCredentialData() failed as we don't call it.
jobrep:
- define a variable emptyname instead of using the string literal. Note that
getgrname also reuses the same buffer...
scas-client:
- getnameinfo() is wrongly described in (my) Linux manpage to use a size_t
hostlen which not only in POSIX is nowadays a socklen_t nodelen, but also in
the actual Linux header file /usr/include/netdb.h, at least since
glibc-2.1.91.
- define variable name in order to call X509_PURPOSE_get_by_sname() with a
char*. The OpenSSL implementation (anything since its introduction in OpenSSL
0.9.5) only uses it in a strcmp so it could have been a const char *, but we
don't rely on the implementation.
verify-proxy:
- treat verify_x509_error_t properly
- remove useless statement nfqan = nfqan
------------------------------------------------------------------------
r17517 | msalle | 2014-02-25 16:58:59 +0100 (Tue, 25 Feb 2014) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-afs/src/afs/lcmaps_afs.c
M /trunk/lcmaps-plugins-basic/src/ban_dn/lcmaps_ban_dn.c
M /trunk/lcmaps-plugins-basic/src/localaccount/lcmaps_localaccount.c
M /trunk/lcmaps-plugins-c-pep/src/c-pep/lcmaps_c_pep.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
M /trunk/lcmaps-plugins-lcas/src/lcas/lcmaps_lcas.c
M /trunk/lcmaps-plugins-scas-client/src/saml2-xacml2/client/pep_obligation_handlers.c
M /trunk/lcmaps-plugins-scas-client/src/scas-client/lcmaps_scas_client.c
M /trunk/lcmaps-plugins-verify-proxy/src/verify-proxy/lcmaps_verify_proxy.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_ban_fqan.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_localaccount.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_localgroup.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_poolaccount.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_poolgroup.c
Fix remaining logstr.
------------------------------------------------------------------------
r17475 | msalle | 2014-02-21 12:45:08 +0100 (Fri, 21 Feb 2014) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
Try find unixODBC first via pkg-config, if that fails look for libodbc and sql
header files. If both fail, end with error.
------------------------------------------------------------------------
r17474 | msalle | 2014-02-21 12:27:12 +0100 (Fri, 21 Feb 2014) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
Update error mesg for missing sql headers
------------------------------------------------------------------------
r17473 | msalle | 2014-02-21 12:25:04 +0100 (Fri, 21 Feb 2014) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/NEWS
M /trunk/lcmaps-plugins-jobrep/configure.ac
Add test for sql header files, part of unixODBC
------------------------------------------------------------------------
r17471 | msalle | 2014-02-21 11:28:50 +0100 (Fri, 21 Feb 2014) | 4 lines
Changed paths:
M /trunk/lcas-lcmaps-gt4-interface/src/Makefile.am
M /trunk/lcmaps/src/Makefile.am
M /trunk/lcmaps-plugins-c-pep/src/c-pep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
M /trunk/lcmaps-plugins-scas-client/src/Makefile.am
M /trunk/mwsec-utils/llrun/Makefile.am
M /trunk/scas/src/Makefile.am
Do not by default enable a large set of compiler warning flags: they are good
for development, not for a distribution tarball...
llrun: do enable -g and -O0 for GNU: it's a debug tool
------------------------------------------------------------------------
r17405 | msalle | 2014-02-11 10:32:14 +0100 (Tue, 11 Feb 2014) | 3 lines
Changed paths:
M /trunk/ees/bootstrap
M /trunk/glexec/bootstrap
M /trunk/lcas/bootstrap
M /trunk/lcas-lcmaps-gt4-interface/bootstrap
M /trunk/lcas-plugins-basic/bootstrap
M /trunk/lcas-plugins-check-executable/bootstrap
M /trunk/lcas-plugins-voms/bootstrap
M /trunk/lcmaps/bootstrap
M /trunk/lcmaps-plugins-afs/bootstrap
M /trunk/lcmaps-plugins-basic/bootstrap
M /trunk/lcmaps-plugins-c-pep/bootstrap
M /trunk/lcmaps-plugins-jobrep/bootstrap
M /trunk/lcmaps-plugins-lcas/bootstrap
M /trunk/lcmaps-plugins-scas-client/bootstrap
M /trunk/lcmaps-plugins-tracking-groupid/bootstrap
M /trunk/lcmaps-plugins-verify-proxy/bootstrap
M /trunk/lcmaps-plugins-voms/bootstrap
M /trunk/scas/bootstrap
Add --force to autoheader: we do not provide our own headerfile template, so we
want want to get that from autoheader.
------------------------------------------------------------------------
r17403 | msalle | 2014-02-10 11:56:07 +0100 (Mon, 10 Feb 2014) | 2 lines
Changed paths:
M /trunk/ees/bootstrap
M /trunk/glexec/bootstrap
M /trunk/lcas/bootstrap
M /trunk/lcas-lcmaps-gt4-interface/bootstrap
M /trunk/lcas-plugins-basic/bootstrap
M /trunk/lcas-plugins-check-executable/bootstrap
M /trunk/lcas-plugins-voms/bootstrap
M /trunk/lcmaps/bootstrap
M /trunk/lcmaps-plugins-afs/bootstrap
M /trunk/lcmaps-plugins-basic/bootstrap
M /trunk/lcmaps-plugins-c-pep/bootstrap
M /trunk/lcmaps-plugins-jobrep/bootstrap
M /trunk/lcmaps-plugins-lcas/bootstrap
M /trunk/lcmaps-plugins-scas-client/bootstrap
M /trunk/lcmaps-plugins-tracking-groupid/bootstrap
M /trunk/lcmaps-plugins-verify-proxy/bootstrap
M /trunk/lcmaps-plugins-voms/bootstrap
M /trunk/saml2-xacml2-c-lib/xacml/bootstrap
M /trunk/scas/bootstrap
Update bootstrap scripts: should run libtoolize before aclocal
------------------------------------------------------------------------
r17356 | msalle | 2014-02-06 17:11:01 +0100 (Thu, 06 Feb 2014) | 2 lines
Changed paths:
M /trunk/glexec/ChangeLog
M /trunk/lcmaps/ChangeLog
M /trunk/lcmaps-plugins-afs/ChangeLog
M /trunk/lcmaps-plugins-basic/ChangeLog
M /trunk/lcmaps-plugins-c-pep/ChangeLog
M /trunk/lcmaps-plugins-jobrep/ChangeLog
M /trunk/lcmaps-plugins-lcas/ChangeLog
M /trunk/lcmaps-plugins-scas-client/ChangeLog
M /trunk/lcmaps-plugins-tracking-groupid/ChangeLog
M /trunk/lcmaps-plugins-verify-proxy/ChangeLog
M /trunk/lcmaps-plugins-voms/ChangeLog
M /trunk/scas/ChangeLog
Update ChangeLog files. We are (hopefully) ready to release.
------------------------------------------------------------------------
r17253 | msalle | 2013-12-12 15:03:28 +0100 (Thu, 12 Dec 2013) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
remove 'action-if-found' for libodbc and libdl to have automatic linking against
them.
------------------------------------------------------------------------
r17229 | msalle | 2013-12-11 12:30:46 +0100 (Wed, 11 Dec 2013) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
Cast numerical constants to correct type
------------------------------------------------------------------------
r17228 | msalle | 2013-12-11 11:19:16 +0100 (Wed, 11 Dec 2013) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-afs/configure.ac
M /trunk/lcmaps-plugins-basic/configure.ac
M /trunk/lcmaps-plugins-c-pep/configure.ac
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-scas-client/configure.ac
M /trunk/lcmaps-plugins-tracking-groupid/configure.ac
M /trunk/lcmaps-plugins-verify-proxy/configure.ac
M /trunk/lcmaps-plugins-voms/configure.ac
Update configure.ac to use the just determined LCMAPS_CFLAGS for checking for
lcmaps_plugin_prototypes.h
------------------------------------------------------------------------
r17195 | msalle | 2013-12-01 17:11:18 +0100 (Sun, 01 Dec 2013) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
Do not use unnamed unions.
------------------------------------------------------------------------
r17192 | msalle | 2013-11-29 12:45:21 +0100 (Fri, 29 Nov 2013) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Add _XOPEN_SOURCE macros and cleanup list of #includes
------------------------------------------------------------------------
r17180 | msalle | 2013-11-28 20:12:57 +0100 (Thu, 28 Nov 2013) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
Fix typo in headerfile name
------------------------------------------------------------------------
r17176 | msalle | 2013-11-25 11:51:38 +0100 (Mon, 25 Nov 2013) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-afs/configure.ac
M /trunk/lcmaps-plugins-basic/configure.ac
M /trunk/lcmaps-plugins-c-pep/configure.ac
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-scas-client/configure.ac
M /trunk/lcmaps-plugins-tracking-groupid/configure.ac
Further cleanup which tests to run
------------------------------------------------------------------------
r17166 | msalle | 2013-11-18 14:36:54 +0100 (Mon, 18 Nov 2013) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
Remove unneeded or obsolete tests
------------------------------------------------------------------------
r17162 | msalle | 2013-11-15 12:42:06 +0100 (Fri, 15 Nov 2013) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Test on HAVE_LCMAPS_LCMAPS_PLUGIN_PROTOTYPES_H using #if defined()
------------------------------------------------------------------------
r17156 | msalle | 2013-11-14 15:35:21 +0100 (Thu, 14 Nov 2013) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/NEWS
Update NEWS file
------------------------------------------------------------------------
r17154 | msalle | 2013-11-14 15:15:40 +0100 (Thu, 14 Nov 2013) | 4 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
A /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_plugin_prototypes.h (from /trunk/lcmaps-plugins-voms/src/voms/lcmaps_plugin_prototypes.h:17151)
Add support for lcmaps_plugin_prototypes.h:
- check lcmaps provides it, if not use private one.
------------------------------------------------------------------------
r17150 | msalle | 2013-11-13 15:43:33 +0100 (Wed, 13 Nov 2013) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
Cleanup of unused tests and compile flags
------------------------------------------------------------------------
r16973 | okoeroo | 2013-03-21 12:45:03 +0100 (Thu, 21 Mar 2013) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/ChangeLog
M /trunk/lcmaps-plugins-jobrep/NEWS
M /trunk/lcmaps-plugins-jobrep/configure.ac
updated changelog
------------------------------------------------------------------------
r16972 | okoeroo | 2013-03-21 12:26:20 +0100 (Thu, 21 Mar 2013) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/doc/jobrep_database_design.graffle
M /trunk/lcmaps-plugins-jobrep/doc/jobrep_database_design.pdf
Updating database schema design, now equipped with gatekeeper_jm_id
------------------------------------------------------------------------
r16971 | okoeroo | 2013-03-21 12:23:55 +0100 (Thu, 21 Mar 2013) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-basic.sql
Added the GATEKEEPER_JM_ID into the compute_jobs table to bind that environment variable to my effective credentials (session) id key for GridSAFE.
------------------------------------------------------------------------
r16970 | okoeroo | 2013-03-21 02:44:05 +0100 (Thu, 21 Mar 2013) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
fixing a stupid mistake
------------------------------------------------------------------------
r16969 | okoeroo | 2013-03-21 02:08:26 +0100 (Thu, 21 Mar 2013) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Adding the GATEKEEPER_JM_ID
------------------------------------------------------------------------
r16968 | okoeroo | 2013-03-11 21:14:51 +0100 (Mon, 11 Mar 2013) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-admin.sh.in
Removed loading the database with the jobrep-create-CE.sql file. The file is obsoleted as all the SQL commands are in the jobrep-create-basic.sql
------------------------------------------------------------------------
r16953 | msalle | 2013-03-04 16:31:43 +0100 (Mon, 04 Mar 2013) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/ChangeLog
Update ChangeLog
------------------------------------------------------------------------
r16952 | msalle | 2013-03-04 16:31:23 +0100 (Mon, 04 Mar 2013) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
Remove -Wconversion flag
------------------------------------------------------------------------
r16950 | msalle | 2013-03-04 16:14:22 +0100 (Mon, 04 Mar 2013) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/ChangeLog
Update ChangeLog
------------------------------------------------------------------------
r16949 | msalle | 2013-03-04 16:14:01 +0100 (Mon, 04 Mar 2013) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/BUGS
Update BUGS
------------------------------------------------------------------------
r16948 | msalle | 2013-03-04 15:58:50 +0100 (Mon, 04 Mar 2013) | 4 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/NEWS
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Add LOG_INFO log line when plugin succeeds.
Fix typo in log message.
Update NEWS file.
------------------------------------------------------------------------
r16947 | msalle | 2013-03-04 15:50:15 +0100 (Mon, 04 Mar 2013) | 4 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
Replace goto-loop with for-loop. Note: we should rework this to prevent relying
on the rowcount. See note on
http://msdn.microsoft.com/en-us/library/windows/desktop/ms711835%28v=vs.85%29.aspx
------------------------------------------------------------------------
r16946 | msalle | 2013-03-04 14:49:33 +0100 (Mon, 04 Mar 2013) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Fix all invalid or implicit type conversions, update return type of SQL_Query
to SQLRETURN, uid and gid data is mostly long, not int. Use macro SQL_SUCCEEDED()
------------------------------------------------------------------------
r16944 | okoeroo | 2013-03-01 16:14:14 +0100 (Fri, 01 Mar 2013) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
Removed a lot of conversion errors in the jobrep plugin code which interacts with the SQL layer on CentOS 6 64
------------------------------------------------------------------------
r16943 | msalle | 2013-03-01 15:24:04 +0100 (Fri, 01 Mar 2013) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
Add test for libcrypto/OpenSSL-devel
------------------------------------------------------------------------
r16942 | msalle | 2013-03-01 15:13:10 +0100 (Fri, 01 Mar 2013) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/NEWS
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.h
Wrong type for certain variables lead to a mismatch on RH6/64 leading to a
SIGABORT. Updating NEWS and version
------------------------------------------------------------------------
r16937 | dennisvd | 2013-02-28 14:28:57 +0100 (Thu, 28 Feb 2013) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/ChangeLog
Update for 1.5.1 release
------------------------------------------------------------------------
r16930 | msalle | 2013-02-27 16:40:15 +0100 (Wed, 27 Feb 2013) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/NEWS
Add NEWS file entry
------------------------------------------------------------------------
r16872 | msalle | 2013-02-25 14:14:58 +0100 (Mon, 25 Feb 2013) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-admin.sh.in
Make jobrep-admin script posix compliant
------------------------------------------------------------------------
r16861 | okoeroo | 2013-02-22 12:16:33 +0100 (Fri, 22 Feb 2013) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Fixing a segv by avoiding an unsafe cast.
------------------------------------------------------------------------
r16768 | msalle | 2012-11-08 15:55:50 +0100 (Thu, 08 Nov 2012) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/Makefile.am
Install and distribute BUGS as documentation
------------------------------------------------------------------------
r16749 | dennisvd | 2012-11-05 23:56:52 +0100 (Mon, 05 Nov 2012) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/doc/lcmaps_jobrep.mod.8
Removed leftover .UE macro.
------------------------------------------------------------------------
r16540 | msalle | 2012-09-28 16:17:18 +0200 (Fri, 28 Sep 2012) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
Add missing newlines in log entries.
------------------------------------------------------------------------
r16538 | msalle | 2012-09-28 15:29:32 +0200 (Fri, 28 Sep 2012) | 7 lines
Changed paths:
D /trunk/lcmaps-plugins-jobrep/INSTALL
M /trunk/lcmaps-plugins-jobrep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/configure.ac
A /trunk/lcmaps-plugins-jobrep/doc/install_instructions.txt (from /trunk/lcmaps-plugins-jobrep/INSTALL:16535)
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-basic.sql
Bugfixes:
- install INSTALL, but rename into install_instructions.txt
- improve text in the install instructions
- typo in jobrep-create-basic.sql: fqan_id -> voms_fqan_id
Bump version
------------------------------------------------------------------------
r16522 | okoeroo | 2012-08-31 15:01:27 +0200 (Fri, 31 Aug 2012) | 3 lines
Changed paths:
A /trunk/lcmaps-plugins-jobrep/BUGS
M /trunk/lcmaps-plugins-jobrep/ChangeLog
A /trunk/lcmaps-plugins-jobrep/README
Updated and new files.
------------------------------------------------------------------------
r16519 | okoeroo | 2012-08-31 13:22:15 +0200 (Fri, 31 Aug 2012) | 1 line
Changed paths:
A /trunk/lcmaps-plugins-jobrep/INSTALL
Adding an Quick INSTALL guide
------------------------------------------------------------------------
r16518 | msalle | 2012-08-31 13:16:12 +0200 (Fri, 31 Aug 2012) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
Fix typo (found by lintian in the binary!)
------------------------------------------------------------------------
r16517 | okoeroo | 2012-08-31 13:13:56 +0200 (Fri, 31 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/doc/lcmaps_jobrep.mod.8
Latest greatest MAN page
------------------------------------------------------------------------
r16515 | okoeroo | 2012-08-31 12:51:15 +0200 (Fri, 31 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/doc/lcmaps_jobrep.mod.8
Typos and fixes
------------------------------------------------------------------------
r16512 | okoeroo | 2012-08-31 12:43:09 +0200 (Fri, 31 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/NEWS
NEWS, read all about it. In this case the jobrep plugin
------------------------------------------------------------------------
r16511 | okoeroo | 2012-08-31 12:31:17 +0200 (Fri, 31 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/doc/jobrep_database_design.graffle
M /trunk/lcmaps-plugins-jobrep/doc/jobrep_database_design.pdf
Updated database schema PDF and date in the OmniGraffle file.
------------------------------------------------------------------------
r16510 | okoeroo | 2012-08-31 12:27:55 +0200 (Fri, 31 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/doc/lcmaps_jobrep.mod.8
Rewritten the man page for this module.
------------------------------------------------------------------------
r16506 | msalle | 2012-08-31 11:16:31 +0200 (Fri, 31 Aug 2012) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/doc/Makefile.am
Fix updated name of manpage
------------------------------------------------------------------------
r16505 | msalle | 2012-08-31 11:01:20 +0200 (Fri, 31 Aug 2012) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
Remove linking with odbcinst (not needed)
------------------------------------------------------------------------
r16501 | msalle | 2012-08-30 10:56:08 +0200 (Thu, 30 Aug 2012) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/utils/Makefile.am
D /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-CE.sql
Remove deprecated jobrep-create-CE.sql
------------------------------------------------------------------------
r16500 | msalle | 2012-08-30 10:52:44 +0200 (Thu, 30 Aug 2012) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/Makefile.am
Do not distribute graffle. Install the database design pdf.
------------------------------------------------------------------------
r16499 | msalle | 2012-08-30 10:42:53 +0200 (Thu, 30 Aug 2012) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/Makefile.am
Make sure manpages are installed. Make sure all docs are distributed.
------------------------------------------------------------------------
r16498 | msalle | 2012-08-30 10:31:35 +0200 (Thu, 30 Aug 2012) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/bootstrap
Update copyright and authors
------------------------------------------------------------------------
r16497 | msalle | 2012-08-29 17:40:19 +0200 (Wed, 29 Aug 2012) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
No pointer arithmetic with void pointers.
------------------------------------------------------------------------
r16496 | msalle | 2012-08-29 17:31:16 +0200 (Wed, 29 Aug 2012) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
Include dir should be with respect to top_srcdir.
------------------------------------------------------------------------
r16495 | msalle | 2012-08-29 16:25:54 +0200 (Wed, 29 Aug 2012) | 2 lines
Changed paths:
D /trunk/lcmaps-plugins-jobrep/project/globus.m4
D /trunk/lcmaps-plugins-jobrep/project/jobrep_api.m4
Removing now-unneeded m4 macros for jobrep_api and globus.
------------------------------------------------------------------------
r16494 | okoeroo | 2012-08-14 11:30:52 +0200 (Tue, 14 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
Cleanup
------------------------------------------------------------------------
r16493 | okoeroo | 2012-08-14 09:15:43 +0200 (Tue, 14 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Fixed crash when the DSN doesn't exist
------------------------------------------------------------------------
r16492 | okoeroo | 2012-08-13 22:52:37 +0200 (Mon, 13 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-CE.sql
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-basic.sql
Adjusted the database schema
------------------------------------------------------------------------
r16491 | okoeroo | 2012-08-13 22:48:50 +0200 (Mon, 13 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Added a database transaction, where needed
------------------------------------------------------------------------
r16490 | okoeroo | 2012-08-13 12:52:59 +0200 (Mon, 13 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-basic.sql
Added effective_credential_unix_gids to the mix. Only need the coupling from or to the Globus environment
------------------------------------------------------------------------
r16489 | okoeroo | 2012-08-13 12:24:34 +0200 (Mon, 13 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-basic.sql
Added insert into effective_credentials_unix_uid_voms and all sub-tables
------------------------------------------------------------------------
r16488 | okoeroo | 2012-08-13 08:15:04 +0200 (Mon, 13 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/doc/jobrep_database_design.graffle
M /trunk/lcmaps-plugins-jobrep/doc/jobrep_database_design.pdf
Updated/reorganized database lay-out and fixed some bugs. Also the code is capable of inserting the annotated table names
------------------------------------------------------------------------
r16487 | okoeroo | 2012-08-12 22:15:35 +0200 (Sun, 12 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/doc/jobrep_database_design.graffle
M /trunk/lcmaps-plugins-jobrep/doc/jobrep_database_design.pdf
Fixed content and updated the lay-out
------------------------------------------------------------------------
r16486 | okoeroo | 2012-08-12 21:48:37 +0200 (Sun, 12 Aug 2012) | 1 line
Changed paths:
A /trunk/lcmaps-plugins-jobrep/doc/jobrep_database_design.graffle
A /trunk/lcmaps-plugins-jobrep/doc/jobrep_database_design.pdf
Adding new database lay-out design.
------------------------------------------------------------------------
r16485 | okoeroo | 2012-08-12 16:29:43 +0200 (Sun, 12 Aug 2012) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-CE.sql
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-basic.sql
Updated the SQL schema, fixed data handling, added support for the insert_last_id(), other improvements.
------------------------------------------------------------------------
r16484 | okoeroo | 2012-08-07 16:22:46 +0200 (Tue, 07 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-basic.sql
Added FQANs into the database, and assigning a user_id by extraction and selection from the certificates directory
------------------------------------------------------------------------
r16483 | okoeroo | 2012-08-07 11:58:01 +0200 (Tue, 07 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-basic.sql
Added push of certificate details to the database.
------------------------------------------------------------------------
r16482 | okoeroo | 2012-08-06 19:12:59 +0200 (Mon, 06 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
A /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.c
A /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_data_handling.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-basic.sql
Split source files
------------------------------------------------------------------------
r16480 | okoeroo | 2012-08-06 17:42:32 +0200 (Mon, 06 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-CE.sql
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-basic.sql
Fixed cleanups and more. Easy querying now
------------------------------------------------------------------------
r16474 | okoeroo | 2012-08-02 18:57:14 +0200 (Thu, 02 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
M /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Tiny updates for the jobrep
------------------------------------------------------------------------
r16473 | okoeroo | 2012-08-02 17:39:58 +0200 (Thu, 02 Aug 2012) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/NEWS
M /trunk/lcmaps-plugins-jobrep/configure.ac
A /trunk/lcmaps-plugins-jobrep/src/api
A /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.c
A /trunk/lcmaps-plugins-jobrep/src/api/jobrep_odbc_api.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Merged jobrepository library into the plug-in. This aids debugging possibilities
------------------------------------------------------------------------
r16150 | dennisvd | 2012-03-15 14:03:02 +0100 (Thu, 15 Mar 2012) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/NEWS
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/doc/Makefile.am
A /trunk/lcmaps-plugins-jobrep/doc/jobrep-admin.8
A /trunk/lcmaps-plugins-jobrep/doc/lcmaps_jobrep.mod.8
Include manual pages (copied from Debian packaging)
------------------------------------------------------------------------
r15769 | okoeroo | 2011-12-16 10:56:45 +0100 (Fri, 16 Dec 2011) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
Adding -avoid-version to the LDFLAGS
------------------------------------------------------------------------
r15762 | okoeroo | 2011-12-16 10:41:38 +0100 (Fri, 16 Dec 2011) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/ChangeLog
M /trunk/lcmaps-plugins-jobrep/configure.ac
Added new changelog, removed comments in the configure.ac file for the jobrep plugin
------------------------------------------------------------------------
r15628 | msalle | 2011-11-24 13:03:32 +0100 (Thu, 24 Nov 2011) | 4 lines
Changed paths:
M /trunk/lcmaps-plugins-afs/configure.ac
M /trunk/lcmaps-plugins-afs/src/afs/Makefile.am
M /trunk/lcmaps-plugins-c-pep/configure.ac
M /trunk/lcmaps-plugins-c-pep/doc/man/lcmaps-plugins-c-pep.8.src
M /trunk/lcmaps-plugins-c-pep/doc/man/sed.template.in
M /trunk/lcmaps-plugins-c-pep/src/c-pep/Makefile.am
M /trunk/lcmaps-plugins-gums/configure.ac
M /trunk/lcmaps-plugins-gums/src/gums/Makefile.am
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
M /trunk/lcmaps-plugins-scas-client/configure.ac
M /trunk/lcmaps-plugins-scas-client/doc/man/lcmaps_plugins_scas_client.8.src
M /trunk/lcmaps-plugins-scas-client/doc/man/sed.template.in
M /trunk/lcmaps-plugins-scas-client/src/Makefile.am
M /trunk/lcmaps-plugins-tracking-groupid/configure.ac
M /trunk/lcmaps-plugins-tracking-groupid/src/tracking_groupid/Makefile.am
M /trunk/lcmaps-plugins-verify-proxy/configure.ac
M /trunk/lcmaps-plugins-verify-proxy/src/verify-proxy/Makefile.am
M /trunk/lcmaps-plugins-voms/configure.ac
M /trunk/lcmaps-plugins-voms/src/voms/Makefile.am
Determine dynamic library extension in configure and use that for creating
.mod symlinks.
------------------------------------------------------------------------
r15550 | okoeroo | 2011-11-10 10:02:28 +0100 (Thu, 10 Nov 2011) | 4 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/NEWS
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_test.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Adjusted logging to match LCMAPS 1.5.0
------------------------------------------------------------------------
r15497 | msalle | 2011-09-20 23:06:18 +0200 (Tue, 20 Sep 2011) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
Downgrading to 1.3.13, since the last release is 1.3.12.
------------------------------------------------------------------------
r15495 | msalle | 2011-09-20 22:52:19 +0200 (Tue, 20 Sep 2011) | 4 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
D /trunk/lcmaps-plugins-jobrep/src/jobrep/globus_gsi_gss_constants.h
D /trunk/lcmaps-plugins-jobrep/src/jobrep/gssapi_openssl.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Cleanup of jobrep code: removing unused header files, removing of commented-out
include statements.
------------------------------------------------------------------------
r15460 | msalle | 2011-08-19 11:32:10 +0200 (Fri, 19 Aug 2011) | 2 lines
Changed paths:
M /trunk/lcas/configure.ac
M /trunk/lcas/src/grid_credential_handling/x509_handling/lcas_x509_utils.c
M /trunk/lcas-plugins-voms/configure.ac
M /trunk/lcas-plugins-voms/src/voms/lcas_voms.c
M /trunk/lcmaps/src/grid_credential_handling/gsi_handling/lcmaps_voms_attributes.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Remove unneeded and incorrect cast.
------------------------------------------------------------------------
r15454 | msalle | 2011-08-17 17:17:19 +0200 (Wed, 17 Aug 2011) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Adding prototypes to used lcmaps functions which are not in a interface header.
------------------------------------------------------------------------
r15434 | msalle | 2011-08-15 17:23:06 +0200 (Mon, 15 Aug 2011) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Use new AC_LCMAPS_INTERFACE([type])
Rename lcmaps_config.h into lcmaps_jobrep_config.h
------------------------------------------------------------------------
r15310 | dennisvd | 2011-07-11 12:11:39 +0200 (Mon, 11 Jul 2011) | 2 lines
Changed paths:
M /trunk/lcas/examples/Makefile.am
M /trunk/lcas-plugins-check-executable/src/check-executable/Makefile.am
M /trunk/lcas-plugins-voms/src/voms/Makefile.am
M /trunk/lcmaps-plugins-afs/src/afs/Makefile.am
M /trunk/lcmaps-plugins-c-pep/src/c-pep/Makefile.am
M /trunk/lcmaps-plugins-gums/src/gums/Makefile.am
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
M /trunk/lcmaps-plugins-scas-client/src/Makefile.am
M /trunk/lcmaps-plugins-tracking-groupid/src/tracking_groupid/Makefile.am
M /trunk/lcmaps-plugins-verify-proxy/src/verify-proxy/Makefile.am
M /trunk/lcmaps-plugins-voms/src/voms/Makefile.am
Make all plugins without versioned names (using -avoid-version)
------------------------------------------------------------------------
r15309 | dennisvd | 2011-07-11 12:05:16 +0200 (Mon, 11 Jul 2011) | 2 lines
Changed paths:
M /trunk/lcas-plugins-check-executable/configure.ac
M /trunk/lcas-plugins-voms/configure.ac
M /trunk/lcmaps-plugins-afs/configure.ac
M /trunk/lcmaps-plugins-c-pep/configure.ac
M /trunk/lcmaps-plugins-gums/configure.ac
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-scas-client/configure.ac
M /trunk/lcmaps-plugins-tracking-groupid/configure.ac
M /trunk/lcmaps-plugins-verify-proxy/configure.ac
M /trunk/lcmaps-plugins-voms/configure.ac
Update the default moduledir to be 'lcas' resp. 'lcmaps' instead of 'modules'.
------------------------------------------------------------------------
r15265 | okoeroo | 2011-04-19 16:20:05 +0200 (Tue, 19 Apr 2011) | 1 line
Changed paths:
A /trunk/lcmaps-plugins-jobrep/NEWS
Adding NEWS file
------------------------------------------------------------------------
r15255 | okoeroo | 2011-04-15 13:56:09 +0200 (Fri, 15 Apr 2011) | 1 line
Changed paths:
A /trunk/lcmaps-plugins-jobrep/ChangeLog
Adding ChangeLog from svn log
------------------------------------------------------------------------
r15241 | msalle | 2011-04-14 12:29:43 +0200 (Thu, 14 Apr 2011) | 2 lines
Changed paths:
M /trunk/glexec/bootstrap
M /trunk/jobrepository/bootstrap
M /trunk/lcas/bootstrap
M /trunk/lcas-plugins-basic/bootstrap
M /trunk/lcas-plugins-check-executable/bootstrap
M /trunk/lcas-plugins-voms/bootstrap
M /trunk/lcmaps-plugins-afs/bootstrap
M /trunk/lcmaps-plugins-basic/bootstrap
M /trunk/lcmaps-plugins-c-pep/bootstrap
M /trunk/lcmaps-plugins-gums/bootstrap
M /trunk/lcmaps-plugins-jobrep/bootstrap
M /trunk/lcmaps-plugins-scas-client/bootstrap
M /trunk/lcmaps-plugins-tracking-groupid/bootstrap
M /trunk/lcmaps-plugins-verify-proxy/bootstrap
M /trunk/lcmaps-plugins-voms/bootstrap
M /trunk/scas/bootstrap
Adding --copy flag to libtoolize, which eases packaging.
------------------------------------------------------------------------
r15182 | dennisvd | 2011-04-05 09:57:47 +0200 (Tue, 05 Apr 2011) | 2 lines
Changed paths:
M /trunk/lcas-plugins-basic/configure.ac
M /trunk/lcas-plugins-basic/src/timeslots/Makefile.am
M /trunk/lcas-plugins-basic/src/userallow/Makefile.am
M /trunk/lcas-plugins-basic/src/userban/Makefile.am
M /trunk/lcas-plugins-check-executable/configure.ac
M /trunk/lcas-plugins-check-executable/src/check-executable/Makefile.am
M /trunk/lcas-plugins-voms/configure.ac
M /trunk/lcas-plugins-voms/src/voms/Makefile.am
M /trunk/lcmaps-plugins-afs/Makefile.am
M /trunk/lcmaps-plugins-afs/configure.ac
M /trunk/lcmaps-plugins-afs/src/afs/Makefile.am
M /trunk/lcmaps-plugins-c-pep/configure.ac
M /trunk/lcmaps-plugins-c-pep/src/c-pep/Makefile.am
M /trunk/lcmaps-plugins-gums/configure.ac
M /trunk/lcmaps-plugins-gums/src/gums/Makefile.am
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
M /trunk/lcmaps-plugins-scas-client/configure.ac
M /trunk/lcmaps-plugins-scas-client/src/Makefile.am
M /trunk/lcmaps-plugins-verify-proxy/configure.ac
M /trunk/lcmaps-plugins-verify-proxy/src/verify-proxy/Makefile.am
M /trunk/lcmaps-plugins-voms/configure.ac
M /trunk/lcmaps-plugins-voms/src/voms/Makefile.am
Added --with-moduledir to set the install location for plug-ins.
------------------------------------------------------------------------
r15174 | msalle | 2011-04-04 18:27:54 +0200 (Mon, 04 Apr 2011) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
bumping version
------------------------------------------------------------------------
r15169 | msalle | 2011-04-04 17:56:35 +0200 (Mon, 04 Apr 2011) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/utils/Makefile.am
Change datarootdir into datadir for EL5 compliance.
------------------------------------------------------------------------
r15060 | dennisvd | 2011-03-25 12:08:52 +0100 (Fri, 25 Mar 2011) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
- bumped to version 1.3.11 because of changes to jobrep-admin.
------------------------------------------------------------------------
r15059 | dennisvd | 2011-03-25 12:06:22 +0100 (Fri, 25 Mar 2011) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/utils/Makefile.am
D /trunk/lcmaps-plugins-jobrep/utils/jobrep-admin
A /trunk/lcmaps-plugins-jobrep/utils/jobrep-admin.sh.in
- generate jobrep-admin with configured sqldir
- install SQL scripts to their own directory
------------------------------------------------------------------------
r15057 | dennisvd | 2011-03-25 02:20:35 +0100 (Fri, 25 Mar 2011) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
disable useless include; clean up flags and library paths somewhat.
------------------------------------------------------------------------
r15049 | dennisvd | 2011-03-24 14:56:30 +0100 (Thu, 24 Mar 2011) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/configure.ac
removed dlopen requirement, trimmed trailing whitespace and fixed 'make clean' in doc.
------------------------------------------------------------------------
r15013 | msalle | 2011-03-22 11:44:36 +0100 (Tue, 22 Mar 2011) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
Merging in EMI_1 update.
------------------------------------------------------------------------
r14914 | msalle | 2011-03-06 11:17:47 +0100 (Sun, 06 Mar 2011) | 2 lines
Changed paths:
M /trunk/jobrepository/configure.ac
M /trunk/lcas/configure.ac
M /trunk/lcas-lcmaps-gt4-interface/configure.ac
M /trunk/lcas-plugins-voms/configure.ac
M /trunk/lcmaps-plugins-afs/configure.ac
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-scas-client/configure.ac
M /trunk/lcmaps-plugins-verify-proxy/configure.ac
M /trunk/lcmaps-plugins-voms/configure.ac
M /trunk/scas/configure.ac
Bumping versions for components with fixed globus / crypto deps.
------------------------------------------------------------------------
r14872 | dennisvd | 2011-03-04 22:00:03 +0100 (Fri, 04 Mar 2011) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/AUTHORS
M /trunk/lcmaps-plugins-jobrep/LICENSE
M /trunk/lcmaps-plugins-jobrep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/bootstrap
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/doc/Makefile.am
M /trunk/lcmaps-plugins-jobrep/doc/jr.tex
M /trunk/lcmaps-plugins-jobrep/doc/jr_include.tex
M /trunk/lcmaps-plugins-jobrep/project/globus.m4
M /trunk/lcmaps-plugins-jobrep/project/jobrep_api.m4
M /trunk/lcmaps-plugins-jobrep/project/lcmaps.m4
M /trunk/lcmaps-plugins-jobrep/src/Makefile.am
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/src/jobrep/globus_gsi_gss_constants.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/gssapi_openssl.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_test.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_test.h
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
M /trunk/lcmaps-plugins-jobrep/utils/Makefile.am
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-admin
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-CE.sql
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-basic.sql
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-drop-total-database.sql
add keyword propery
------------------------------------------------------------------------
r14871 | dennisvd | 2011-03-04 21:59:38 +0100 (Fri, 04 Mar 2011) | 1 line
Changed paths:
M /trunk/lcmaps-plugins-jobrep/LICENSE
M /trunk/lcmaps-plugins-jobrep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/src/Makefile.am
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-admin
removed executable bit
------------------------------------------------------------------------
r14846 | msalle | 2011-03-04 16:22:33 +0100 (Fri, 04 Mar 2011) | 2 lines
Changed paths:
M /trunk/lcas-plugins-voms/configure.ac
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-verify-proxy/configure.ac
M /trunk/lcmaps-plugins-voms/configure.ac
Add check for libcrypto in essential components.
------------------------------------------------------------------------
r14690 | msalle | 2011-02-25 15:38:01 +0100 (Fri, 25 Feb 2011) | 2 lines
Changed paths:
M /trunk/jobrepository/Makefile.am
M /trunk/jobrepository/configure.ac
M /trunk/lcas-lcmaps-gt4-interface/configure.ac
M /trunk/lcas-plugins-basic/configure.ac
M /trunk/lcas-plugins-check-executable/configure.ac
M /trunk/lcas-plugins-voms/configure.ac
M /trunk/lcmaps-plugins-afs/configure.ac
M /trunk/lcmaps-plugins-basic/configure.ac
M /trunk/lcmaps-plugins-gums/configure.ac
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-verify-proxy/configure.ac
M /trunk/lcmaps-plugins-voms/configure.ac
M /trunk/scas/configure.ac
Re-syncing all the versions with branch EMI-1
------------------------------------------------------------------------
r14618 | msalle | 2011-02-23 12:58:46 +0100 (Wed, 23 Feb 2011) | 3 lines
Changed paths:
M /trunk
M /trunk/ees
M /trunk/ees-plugins-one
M /trunk/glexec
M /trunk/lcas
M /trunk/lcas-lcmaps-gt4-interface
M /trunk/lcas-plugins-basic
M /trunk/lcas-plugins-check-executable
M /trunk/lcas-plugins-voms
M /trunk/lcmaps-plugins-afs
M /trunk/lcmaps-plugins-basic
M /trunk/lcmaps-plugins-c-pep
M /trunk/lcmaps-plugins-gums
M /trunk/lcmaps-plugins-jobrep
M /trunk/lcmaps-plugins-scas-client
M /trunk/lcmaps-plugins-verify-proxy
M /trunk/lcmaps-plugins-voms
M /trunk/scas
Updating externals to use http://ndpfsvn.nikhef.nl/ro instead of
https://ndpfsvn.nikhef.nl/repos
------------------------------------------------------------------------
r14572 | msalle | 2011-02-06 16:38:54 +0100 (Sun, 06 Feb 2011) | 10 lines
Changed paths:
M /trunk/lcas/configure.ac
M /trunk/lcas-lcmaps-gt4-interface/configure.ac
M /trunk/lcas-plugins-basic/configure.ac
M /trunk/lcas-plugins-check-executable/configure.ac
M /trunk/lcas-plugins-voms/configure.ac
M /trunk/lcmaps/configure.ac
M /trunk/lcmaps-plugins-afs/configure.ac
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-voms/configure.ac
M /trunk/m4/globus.m4
Major overhaul of globus.m4 and adaptation of all the configure.ac files.
- we can either call e.g. AC_GLOBUS_CALLOUT and parse have_globus_callout or
call AC_GLOBUS([CALLOUT],[action when found],[action when not found])
- AC_GLOBUS does an AC_REQUIRE on AC_GLOBUS_INIT. That macro defines the
configure flags such as --with-globus-prefix etc. and then defines all the
AC_GLOBUS_ macros.
This way, we can modularly call all the globus package-macros and get only the
CFLAGS and LIBS flags of the modules we actually use.
------------------------------------------------------------------------
r11986 | msalle | 2011-01-12 15:02:46 +0100 (Wed, 12 Jan 2011) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/Makefile.am
Also adding doc/Makefile.am to EXTRA_DIST since we don't run make in that dir.
------------------------------------------------------------------------
r11985 | msalle | 2011-01-12 14:55:57 +0100 (Wed, 12 Jan 2011) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/Makefile.am
Add doc/Makefile.in to the distrib.
------------------------------------------------------------------------
r11984 | msalle | 2011-01-12 14:44:25 +0100 (Wed, 12 Jan 2011) | 7 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
D /trunk/lcmaps-plugins-jobrep/src/jobrep/globus_i_gsi_credential.h
D /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_voms_utils.c
D /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_voms_utils.h
Removing unused files:
lcmaps-plugins-jobrep/src/jobrep/lcmaps_voms_utils.?
lcmaps-plugins-jobrep/src/jobrep/globus_i_gsi_credential.h
Adding doc/*.tex files to EXTRA_DIST
Adding globus-related headers to noinst_HEADERS
------------------------------------------------------------------------
r11983 | msalle | 2011-01-11 18:46:00 +0100 (Tue, 11 Jan 2011) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/Makefile.am
Updating Makefile.am for missing dist files.
------------------------------------------------------------------------
r11982 | msalle | 2011-01-11 18:36:33 +0100 (Tue, 11 Jan 2011) | 6 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep
A /trunk/lcmaps-plugins-jobrep/AUTHORS
M /trunk/lcmaps-plugins-jobrep/bootstrap
D /trunk/lcmaps-plugins-jobrep/build.xml
M /trunk/lcmaps-plugins-jobrep/configure.ac
D /trunk/lcmaps-plugins-jobrep/project/build.number
D /trunk/lcmaps-plugins-jobrep/project/build.properties
D /trunk/lcmaps-plugins-jobrep/project/configure.properties.xml
A /trunk/lcmaps-plugins-jobrep/project/globus.m4
A /trunk/lcmaps-plugins-jobrep/project/jobrep_api.m4
A /trunk/lcmaps-plugins-jobrep/project/lcmaps.m4
D /trunk/lcmaps-plugins-jobrep/project/properties.xml
D /trunk/lcmaps-plugins-jobrep/project/version.properties
D /trunk/lcmaps-plugins-jobrep/runautotools
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_test.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_voms_utils.c
D /trunk/lcmaps-plugins-jobrep/src/lcmaps_config.h.in
Updating jobrep plugin for new build scenario:
- using own m4 macros.
- removing glite reference.
- removinh dead files
- adding AUTHORS
------------------------------------------------------------------------
r10323 | okoeroo | 2007-08-27 15:44:56 +0200 (Mon, 27 Aug 2007) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/project/version.properties
Bumped age: No code change but needed to stay in sync for the next jump to LCMAPS 1.4.x
------------------------------------------------------------------------
r10281 | okoeroo | 2007-08-03 00:20:26 +0200 (Fri, 03 Aug 2007) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/project/version.properties
bumped
------------------------------------------------------------------------
r10198 | venekamp | 2007-05-23 19:24:27 +0200 (Wed, 23 May 2007) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/project/version.properties
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
o Make Makefile.am build in 32 and 64 bit builds.
------------------------------------------------------------------------
r10052 | okoeroo | 2006-11-30 10:04:52 +0100 (Thu, 30 Nov 2006) | 4 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/project/version.properties
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
Includes the CFLAGS fix for etics, plus bumped version to 1.3.6
note: also here I note to have left a $(libdir)
------------------------------------------------------------------------
r7925 | msteenba | 2005-12-13 12:29:14 +0100 (Tue, 13 Dec 2005) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
removed voms dependency
------------------------------------------------------------------------
r7924 | okoeroo | 2005-12-13 11:33:00 +0100 (Tue, 13 Dec 2005) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-admin
Fixed database install script to go to the correct directory for the sql scripts.
------------------------------------------------------------------------
r7754 | okoeroo | 2005-12-07 14:56:54 +0100 (Wed, 07 Dec 2005) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-basic.sql
Updated table voms_attributes to include the service_action_id.
This change had a small cascaded effect in the code to accompany this change
------------------------------------------------------------------------
r7627 | okoeroo | 2005-11-29 13:59:55 +0100 (Tue, 29 Nov 2005) | 4 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
This commit includes the fix to the bugs reports that state that the JobRep
didn't log the GIDs when using non-VOMS proxies.
This one, seems to work like a charm.
------------------------------------------------------------------------
r7566 | okoeroo | 2005-11-25 16:24:42 +0100 (Fri, 25 Nov 2005) | 4 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
The GID bug is being solved now. It is more wise to make an in-memory
structure for UID and GIDs which can be inserted with or without VOMS links.
This will result in a much cleaner and better result in the database.
------------------------------------------------------------------------
r7509 | msteenba | 2005-11-23 14:27:18 +0100 (Wed, 23 Nov 2005) | 2 lines
Changed paths:
M /trunk/lcmaps/configure.ac
M /trunk/lcmaps/project/version.properties
M /trunk/lcmaps-interface/configure.ac
M /trunk/lcmaps-interface/project/version.properties
M /trunk/lcmaps-plugins-afs/configure.ac
M /trunk/lcmaps-plugins-afs/project/version.properties
M /trunk/lcmaps-plugins-basic/configure.ac
M /trunk/lcmaps-plugins-basic/project/version.properties
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/project/version.properties
M /trunk/lcmaps-plugins-verify-proxy/configure.ac
M /trunk/lcmaps-plugins-verify-proxy/project/version.properties
M /trunk/lcmaps-plugins-voms/configure.ac
M /trunk/lcmaps-plugins-voms/project/version.properties
updated version
------------------------------------------------------------------------
r7141 | okoeroo | 2005-10-31 13:55:57 +0100 (Mon, 31 Oct 2005) | 4 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Cleaned up Makefile.am in the src dir and the .c file accordingly:
- No more VOMS inclusions: finally cleaned it all up, get the info at runtime through the LCMAPS framework anyway...
- No more vague and obscure inclusions of gsi or gss or whatever Globus libs, only one is still needed, which needs to get out!
------------------------------------------------------------------------
r7140 | okoeroo | 2005-10-31 09:52:46 +0100 (Mon, 31 Oct 2005) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Includes some outcommented code
BTW: Hopefully this will work on the build system...
------------------------------------------------------------------------
r7069 | okoeroo | 2005-10-26 17:47:32 +0200 (Wed, 26 Oct 2005) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
The service_id in the jobs table was not filled with its intended value.
This is fixed (and tested)
------------------------------------------------------------------------
r6972 | okoeroo | 2005-10-20 13:26:41 +0200 (Thu, 20 Oct 2005) | 4 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/doc/Makefile.am
M /trunk/lcmaps-plugins-jobrep/doc/jr.tex
Kicked the build of the docs out of the sequence
Latex couldn't make sence of tabularx when creating HTML, thus switched back to normal tabular
Kicked parts out of the scripts that redirected the err message tot /dev/null
------------------------------------------------------------------------
r6971 | okoeroo | 2005-10-20 11:58:57 +0200 (Thu, 20 Oct 2005) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/doc/Makefile.am
Hacked the documentation build problem away by commenting out the install-data-hook
for the creation of the HTML files of the doc. Sad but needed until further notice
------------------------------------------------------------------------
r6970 | okoeroo | 2005-10-20 11:21:12 +0200 (Thu, 20 Oct 2005) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/doc/jr.tex
Finished the jr.tex file.
------------------------------------------------------------------------
r6945 | okoeroo | 2005-10-19 16:16:36 +0200 (Wed, 19 Oct 2005) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/configure.ac
Making the docs up to date with reality
------------------------------------------------------------------------
r6944 | okoeroo | 2005-10-19 16:15:35 +0200 (Wed, 19 Oct 2005) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/doc/Makefile.am
M /trunk/lcmaps-plugins-jobrep/doc/jr.tex
Making the doc up to date with reality
------------------------------------------------------------------------
r6938 | okoeroo | 2005-10-19 11:35:04 +0200 (Wed, 19 Oct 2005) | 2 lines
Changed paths:
A /trunk/lcmaps-plugins-jobrep/doc/jr.tex
A /trunk/lcmaps-plugins-jobrep/doc/jr_include.tex
Added jr.tex and jr_include.tex files for documentation on the Job Repository
------------------------------------------------------------------------
r6923 | okoeroo | 2005-10-18 13:32:01 +0200 (Tue, 18 Oct 2005) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/project/build.number
M /trunk/lcmaps-plugins-jobrep/project/version.properties
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Merged branch with head
------------------------------------------------------------------------
r6852 | okoeroo | 2005-10-13 14:37:36 +0200 (Thu, 13 Oct 2005) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/project/version.properties
new version 1.3.2
------------------------------------------------------------------------
r6851 | okoeroo | 2005-10-13 14:28:55 +0200 (Thu, 13 Oct 2005) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
More touch-ups
------------------------------------------------------------------------
r6850 | okoeroo | 2005-10-13 13:26:39 +0200 (Thu, 13 Oct 2005) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Touch-up of the code, primarily on the loglevel stuff
------------------------------------------------------------------------
r6845 | msteenba | 2005-10-11 13:52:58 +0200 (Tue, 11 Oct 2005) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-afs/src/afs/lcmaps_afs.c
M /trunk/lcmaps-plugins-basic/src/dummy/lcmaps_dummy_bad.c
M /trunk/lcmaps-plugins-basic/src/dummy/lcmaps_dummy_good.c
M /trunk/lcmaps-plugins-basic/src/gridlist/lcmaps_gridlist.c
M /trunk/lcmaps-plugins-basic/src/gridlist/lcmaps_gridlist.h
M /trunk/lcmaps-plugins-basic/src/ldap_enf/lcmaps_ldap.c
M /trunk/lcmaps-plugins-basic/src/localaccount/lcmaps_localaccount.c
M /trunk/lcmaps-plugins-basic/src/poolaccount/lcmaps_poolaccount.c
M /trunk/lcmaps-plugins-basic/src/posix_enf/lcmaps_posix.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_localaccount.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_localgroup.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_poolaccount.c
added plugin_verify() method in all plugins
------------------------------------------------------------------------
r6806 | okoeroo | 2005-10-07 14:03:24 +0200 (Fri, 07 Oct 2005) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/utils/Makefile.am
now distribute db schema installation scripts in rpm
------------------------------------------------------------------------
r6805 | okoeroo | 2005-10-07 13:22:09 +0200 (Fri, 07 Oct 2005) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
M /trunk/lcmaps-plugins-jobrep/utils/Makefile.am
Changed the log levels on all the comments that I have introduced into the plugin for debugging purposes.
Attempting to include the SQL deployment scripts/files
------------------------------------------------------------------------
r6636 | okoeroo | 2005-09-30 15:00:32 +0200 (Fri, 30 Sep 2005) | 5 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-CE.sql
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-basic.sql
Updated DB Schema
+ name modifications
- foreign key to voms_server
+ works with the code, totally :D
------------------------------------------------------------------------
r6635 | okoeroo | 2005-09-30 12:14:55 +0200 (Fri, 30 Sep 2005) | 6 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Fixed all problems regarding the DB Schema change
Also fixed a lot of small coding problems
Note:
The DB Schema has a few touch ups that still needs to be included into cvs
The deployment still needs to be improved
------------------------------------------------------------------------
r6632 | okoeroo | 2005-09-28 15:15:22 +0200 (Wed, 28 Sep 2005) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/build.xml
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
The jobrep plugin is now extracting the VOMS attributes with the mapping information from the LCMAPS Framework
And it works ...
------------------------------------------------------------------------
r5601 | okoeroo | 2005-07-29 12:25:47 +0200 (Fri, 29 Jul 2005) | 3 lines
Changed paths:
A /trunk/lcmaps-plugins-jobrep/utils/jobrep-admin
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-CE.sql
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-basic.sql
Added jobrep-admin
- This script-tool can be used to setup the jobrepository database
------------------------------------------------------------------------
r5559 | okoeroo | 2005-07-27 16:02:33 +0200 (Wed, 27 Jul 2005) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
This version will be tested on the test machine - asap
------------------------------------------------------------------------
r5558 | okoeroo | 2005-07-27 15:51:42 +0200 (Wed, 27 Jul 2005) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-CE.sql
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-basic.sql
Added table: action_type
Note: did not put the DB Schema GRANTs correctly yet!
------------------------------------------------------------------------
r5557 | okoeroo | 2005-07-27 14:24:26 +0200 (Wed, 27 Jul 2005) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-CE.sql
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-basic.sql
Updated DB Schema
------------------------------------------------------------------------
r5516 | okoeroo | 2005-07-25 12:49:32 +0200 (Mon, 25 Jul 2005) | 14 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
Big code change:
- certificate parsing in seperate function
- VOMS attributes will only be retrieved from the framework
- SQL has changed conforming the new layout
Bugs:
- Still have problems with the certificate chain conversion into a structure to be inserted into the database later in the code
- No VOMS server information is gathered at the moment
- Need to revise unix_uid, unix_gid
SQL Notes:
- Need to add letters 's' for some tables
- Need to add the table 'action_types'
------------------------------------------------------------------------
r4701 | msteenba | 2005-06-14 18:59:13 +0200 (Tue, 14 Jun 2005) | 2 lines
Changed paths:
A /trunk/lcmaps/runautotools
A /trunk/lcmaps-interface/runautotools
A /trunk/lcmaps-plugins-afs/runautotools
A /trunk/lcmaps-plugins-basic/runautotools
A /trunk/lcmaps-plugins-jobrep/runautotools
A /trunk/lcmaps-plugins-voms/runautotools
just a script to run autotools automagically with glite settings
------------------------------------------------------------------------
r4480 | msteenba | 2005-06-03 16:45:52 +0200 (Fri, 03 Jun 2005) | 3 lines
Changed paths:
M /trunk/lcmaps/configure.ac
M /trunk/lcmaps/project/version.properties
M /trunk/lcmaps-interface/test/test_lcmaps_return_poolindex_without_gsi.c
M /trunk/lcmaps-plugins-afs/configure.ac
M /trunk/lcmaps-plugins-afs/project/version.properties
M /trunk/lcmaps-plugins-basic/configure.ac
M /trunk/lcmaps-plugins-basic/project/version.properties
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/project/version.properties
M /trunk/lcmaps-plugins-voms/configure.ac
M /trunk/lcmaps-plugins-voms/project/version.properties
- bump version to 1.3.1 to stay in sync with lcmaps-interface
- added option -fqans to test script
------------------------------------------------------------------------
r4329 | zurek | 2005-05-26 17:18:33 +0200 (Thu, 26 May 2005) | 2 lines
Changed paths:
M /trunk/lcas/build.xml
M /trunk/lcas-interface/build.xml
M /trunk/lcas-plugins-basic/build.xml
M /trunk/lcas-plugins-voms/build.xml
M /trunk/lcmaps/build.xml
M /trunk/lcmaps-interface/build.xml
M /trunk/lcmaps-plugins-afs/build.xml
M /trunk/lcmaps-plugins-basic/build.xml
M /trunk/lcmaps-plugins-jobrep/build.xml
M /trunk/lcmaps-plugins-voms/build.xml
inserted module.build.file
------------------------------------------------------------------------
r3871 | zurek | 2005-04-12 22:24:56 +0200 (Tue, 12 Apr 2005) | 2 lines
Changed paths:
A /trunk/lcas/project/build.number
M /trunk/lcas/project/version.properties
A /trunk/lcas-interface/project/build.number
M /trunk/lcas-interface/project/version.properties
A /trunk/lcas-plugins-basic/project/build.number
M /trunk/lcas-plugins-basic/project/version.properties
A /trunk/lcas-plugins-voms/project/build.number
M /trunk/lcas-plugins-voms/project/version.properties
A /trunk/lcmaps/project/build.number
M /trunk/lcmaps/project/version.properties
A /trunk/lcmaps-interface/project/build.number
M /trunk/lcmaps-interface/project/version.properties
A /trunk/lcmaps-plugins-afs/project/build.number
M /trunk/lcmaps-plugins-afs/project/version.properties
A /trunk/lcmaps-plugins-basic/project/build.number
M /trunk/lcmaps-plugins-basic/project/version.properties
A /trunk/lcmaps-plugins-jobrep/project/build.number
M /trunk/lcmaps-plugins-jobrep/project/version.properties
A /trunk/lcmaps-plugins-voms/project/build.number
M /trunk/lcmaps-plugins-voms/project/version.properties
"corrections"
------------------------------------------------------------------------
r3569 | okoeroo | 2005-03-21 17:12:01 +0100 (Mon, 21 Mar 2005) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-CE.sql
Can't recreate the database when it already exists from the CE specific script
------------------------------------------------------------------------
r3568 | okoeroo | 2005-03-21 17:10:06 +0100 (Mon, 21 Mar 2005) | 2 lines
Changed paths:
A /trunk/lcmaps-plugins-jobrep/utils/Makefile.am
automakefile
------------------------------------------------------------------------
r3567 | okoeroo | 2005-03-21 17:06:58 +0100 (Mon, 21 Mar 2005) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-CE.sql
M /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-basic.sql
A /trunk/lcmaps-plugins-jobrep/utils/jobrep-drop-total-database.sql
Added drop script.
Made the split changes to the create script files
------------------------------------------------------------------------
r3566 | okoeroo | 2005-03-21 16:58:22 +0100 (Mon, 21 Mar 2005) | 2 lines
Changed paths:
D /trunk/lcmaps-plugins-jobrep/utils/edg-jobrep-create.sql
Removal of edg tagged create script
------------------------------------------------------------------------
r3565 | okoeroo | 2005-03-21 16:57:01 +0100 (Mon, 21 Mar 2005) | 5 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/utils/edg-jobrep-create.sql
A /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-CE.sql
A /trunk/lcmaps-plugins-jobrep/utils/jobrep-create-basic.sql
Rename and renew of the SQL creation scripts for MySQL
The Job Repository creation scripts a split in:
-jobrep-create-basic.sql
-jobrep-create-CE.sql
------------------------------------------------------------------------
r3474 | okoeroo | 2005-03-17 16:44:00 +0100 (Thu, 17 Mar 2005) | 3 lines
Changed paths:
A /trunk/lcmaps-plugins-jobrep/utils
A /trunk/lcmaps-plugins-jobrep/utils/edg-jobrep-create.sql
First renewed version of the Job Repository Database Schema
(Which makes it also usefull for other services then just the gatekeeper)
------------------------------------------------------------------------
r3127 | msteenba | 2005-02-27 02:30:42 +0100 (Sun, 27 Feb 2005) | 2 lines
Changed paths:
M /trunk/lcmaps/Doxyfile
M /trunk/lcmaps/examples/lcmaps_plugin_example.c
M /trunk/lcmaps/interface/lcmaps_modules.h
M /trunk/lcmaps/src/evaluationmanager/evaluationmanager.c
M /trunk/lcmaps/src/evaluationmanager/pdl_main.c
M /trunk/lcmaps/src/evaluationmanager/pdl_policy.c
M /trunk/lcmaps/src/evaluationmanager/pdl_rule.c
M /trunk/lcmaps/src/evaluationmanager/pdl_variable.c
M /trunk/lcmaps/src/grid_credential_handling/_lcmaps_credential.h
M /trunk/lcmaps/src/grid_credential_handling/lcmaps_credential.c
M /trunk/lcmaps/src/grid_credential_handling/lcmaps_runvars.c
M /trunk/lcmaps/src/lcmaps.c
M /trunk/lcmaps/src/pluginmanager/lcmaps_arguments.c
M /trunk/lcmaps/src/pluginmanager/lcmaps_db_read.c
M /trunk/lcmaps/src/pluginmanager/lcmaps_utils.c
M /trunk/lcmaps-interface/interface/lcmaps.h
M /trunk/lcmaps-plugins-afs/src/afs/lcmaps_afs.c
M /trunk/lcmaps-plugins-basic/src/ldap_enf/lcmaps_ldap.c
M /trunk/lcmaps-plugins-basic/src/localaccount/lcmaps_localaccount.c
M /trunk/lcmaps-plugins-basic/src/poolaccount/lcmaps_poolaccount.c
M /trunk/lcmaps-plugins-basic/src/posix_enf/lcmaps_posix.c
M /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_localaccount.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_localgroup.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_poolaccount.c
M /trunk/lcmaps-plugins-voms/src/voms/lcmaps_voms_poolgroup.c
reorganized apidoc
------------------------------------------------------------------------
r2534 | msteenba | 2005-01-12 12:28:07 +0100 (Wed, 12 Jan 2005) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/build.xml
M /trunk/lcmaps-plugins-jobrep/configure.ac
M /trunk/lcmaps-plugins-jobrep/project/properties.xml
D /trunk/lcmaps-plugins-jobrep/src/api
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
fixes in order to build properly with ant
------------------------------------------------------------------------
r2412 | okoeroo | 2005-01-06 16:28:18 +0100 (Thu, 06 Jan 2005) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
now use the headers from the jobrepository module
------------------------------------------------------------------------
r2411 | okoeroo | 2005-01-06 15:13:14 +0100 (Thu, 06 Jan 2005) | 3 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/Makefile.am
M /trunk/lcmaps-plugins-jobrep/configure.ac
D /trunk/lcmaps-plugins-jobrep/include
M /trunk/lcmaps-plugins-jobrep/project/version.properties
A /trunk/lcmaps-plugins-jobrep/src/jobrep
A /trunk/lcmaps-plugins-jobrep/src/jobrep/Makefile.am
A /trunk/lcmaps-plugins-jobrep/src/jobrep/globus_gsi_gss_constants.h
A /trunk/lcmaps-plugins-jobrep/src/jobrep/globus_i_gsi_credential.h
A /trunk/lcmaps-plugins-jobrep/src/jobrep/gssapi_openssl.h
A /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_test.c
A /trunk/lcmaps-plugins-jobrep/src/jobrep/jobrep_test.h
A /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_jobrep.c
A /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_voms_utils.c
A /trunk/lcmaps-plugins-jobrep/src/jobrep/lcmaps_voms_utils.h
Added the plugin sources.
Configuration changes
------------------------------------------------------------------------
r2370 | okoeroo | 2005-01-04 16:46:16 +0100 (Tue, 04 Jan 2005) | 2 lines
Changed paths:
M /trunk/lcmaps-plugins-jobrep/build.xml
M /trunk/lcmaps-plugins-jobrep/doc/Makefile.am
A /trunk/lcmaps-plugins-jobrep/include
A /trunk/lcmaps-plugins-jobrep/include/jobrep_api.h
A /trunk/lcmaps-plugins-jobrep/src/api
A /trunk/lcmaps-plugins-jobrep/src/api/jobrep_api.c
All kind of changes
------------------------------------------------------------------------
r2369 | okoeroo | 2005-01-04 16:24:32 +0100 (Tue, 04 Jan 2005) | 2 lines
Changed paths:
A /trunk/lcmaps-plugins-jobrep/Makefile.am
A /trunk/lcmaps-plugins-jobrep/bootstrap
A /trunk/lcmaps-plugins-jobrep/build.xml
A /trunk/lcmaps-plugins-jobrep/configure.ac
A /trunk/lcmaps-plugins-jobrep/doc
A /trunk/lcmaps-plugins-jobrep/doc/Makefile.am
A /trunk/lcmaps-plugins-jobrep/src
A /trunk/lcmaps-plugins-jobrep/src/Makefile.am
A /trunk/lcmaps-plugins-jobrep/src/lcmaps_config.h.in
Added first set of plain and simple files
------------------------------------------------------------------------
r2368 | okoeroo | 2005-01-04 16:12:56 +0100 (Tue, 04 Jan 2005) | 2 lines
Changed paths:
A /trunk/lcmaps-plugins-jobrep/project
A /trunk/lcmaps-plugins-jobrep/project/build.properties
A /trunk/lcmaps-plugins-jobrep/project/configure.properties.xml
A /trunk/lcmaps-plugins-jobrep/project/properties.xml
A /trunk/lcmaps-plugins-jobrep/project/version.properties
Added project files
------------------------------------------------------------------------
r2367 | okoeroo | 2005-01-04 15:18:12 +0100 (Tue, 04 Jan 2005) | 2 lines
Changed paths:
A /trunk/lcmaps-plugins-jobrep/LICENSE
Licence file
------------------------------------------------------------------------
r1236 | dimeglio | 2004-10-29 17:36:38 +0200 (Fri, 29 Oct 2004) | 2 lines
Changed paths:
M /trunk/lcas-plugins-basic
M /trunk/lcas-plugins-voms
M /trunk/lcmaps-interface
M /trunk/lcmaps-plugins-afs
M /trunk/lcmaps-plugins-basic
A /trunk/lcmaps-plugins-jobrep
M /trunk/lcmaps-plugins-voms
First version of this file
------------------------------------------------------------------------
lcmaps-plugins-jobrep-1.5.7/doc/ 0000755 0001750 0000144 00000000000 14574774166 013530 5 0000000 0000000 lcmaps-plugins-jobrep-1.5.7/doc/jr/ 0000755 0001750 0000144 00000000000 14574533163 014131 5 0000000 0000000 lcmaps-plugins-jobrep-1.5.7/doc/jr/jr.tex 0000644 0001750 0000144 00000037236 14574533163 015221 0000000 0000000 \documentclass[12pt,a4paper,twoside]{article}
\usepackage[dutch,english]{babel}
%\usepackage[pdftex,colorlinks]{hyperref}
\usepackage{html}
\usepackage{moreverb}
\usepackage{tabularx}
%\usepackage{alltt}
\include{jr_include}
%
% Start document
%
\begin{document}
% The following is a bloody hack. Normally an escaped underscore in an html URL
% is ok for latex and latex2html, BUT PDFLATEX CRASHES BECAUSE OF THIS !
% if however an escaped underscore '\_' is used before the first html command in another
% environment it works !!!! AAAAARGH ! (tabbing is nice because the line is not displayed)
\begin{tabbing}
a\_a \= text \kill
\end{tabbing}
%\maketitle
\begin{center}
{\Huge \textbf{
Guide to Job Repository version \version\
}}\\[0.5cm]
{\large \textbf{Oscar Koeroo}}\\[0.3cm]
{\large 21 October 2005}
\end{center}
%\tableofcontents
\begin{htmlonly}
This document is also available as
\htmladdnormallinkfoot{PostScript file}{jr.ps}.
and
\htmladdnormallinkfoot{PDF file}{jr.pdf}.
\end{htmlonly}
%
% All the chapters
%
\section{Introduction}
This component is constructed as an effort of the Joint Research Activity 3 (JRA3) which is responsable for all
security aspects of the \htmladdnormallinkfoot{Enabling Grids for E-sciencE (EGEE)}{http://www.glite.org}.
This component is part of the security subsystem of the gLite software distrobution.
The Job Repository is orginally constructed as a part of the \htmladdnormallinkfoot{European Datagrid project}{http://www.eu-datagrid.org} project.
It was constructed as a part of the Gridification subtask (Work Package 4).
It collects information about the user, its job and user-mapping information when a job has been assigned to a fabric and handled by LCMAPS.
This document describes the Job Repository, which is an extra functionality to log and keep track of what is happening inside your farm.
The Job Repository consists of different parts:
\bi
\item \texttt{The Database}, typicaly a MySQL database that holds the information as the Job Repository database which is connectable via an ODBC interface to ensure the interoperability with other then MySQL database backends.
\item \texttt{Job Repository LCMAPS module}, this module is loaded in the LCMAPS framework and extracts job, user and credential information from the LCMAPS framework and stores this information in a relational database. It includes the database schema.
\item \texttt{Job Repository API}, this library is the interface between the LCMAPS module and the ODBC connection to the database.
\ei
More information on LCMAPS can be found \htmladdnormallinkfoot{here}{http://www.nikhef.nl/grid/lcaslcmaps/}.
\section{Installation}
The installation guide is split in two subsections. The first will handle the details about setting up a database. It will describe how to handle with a MySQL database. Oracle and other databases will work simularly when using a different ODBC driver for the connection.
The second subsection will explain the changes to be done to let the Job Repository work on your service. This concerns changing LCMAPS configurations and adding new configuration files to your system.
At the present time only a CE is supported as service through the use of the LCMAPS framework. Other more common interfaces will not be realised within the EGEE project.
\subsection{The Database}
The Job Repository needs to have a SQL database server. We build it around a MySQL database so this document will only state this database. Also the database creation scripts are written in a MySQL specific style. Take this into account if you wish to upgrade and/or alter the database server into something else like Postgres or Oracle.
The packages listed here are needed for the backend side of the Job Repository:
\btab
\caption{RPMs to be installed on the database running machine.
\label{tab:backendrpms} }
\begin{center}
\begin{htmlonly}
\begin{tabular}{||l|l|l|l||}
\hline
RPM & min. version & description & URL \\
\hline
\texttt{MySQL-server} & 4.0.13 (or higher)
& the MySQL backend for the job repository
& \htmladdnormallink{http://www.mysql.com}
{http://www.mysql.com} \\
\texttt{MySQL-client} & 4.0.13 (or higher)
& the MySQL client, needed by the job repository utils
& \htmladdnormallink{http://www.mysql.com}
{http://www.mysql.com} \\
\texttt{MyODBC} & 3.51.06 (or higher)
& the MySQL ODBC 3.51 Driver
& \htmladdnormallink{http://www.mysql.com}
{http://www.mysql.com} \\
\hline
\end{tabular}
\end{htmlonly}
\begin{latexonly}
\tiny
\begin{tabular}{||l|l|l|l||}
\hline
RPM & min. version & description + URL \\
\hline
\texttt{MySQL-server} & 4.0.13 (or higher)
& the MySQL backend for the job repository
& \htmladdnormallink{http://www.mysql.com}
{http://www.mysql.com} \\
\texttt{MySQL-client} & 4.0.13 (or higher)
& the MySQL client, needed by the job repository utils
& \htmladdnormallink{http://www.mysql.com}
{http://www.mysql.com} \\
\texttt{MyODBC} & 3.51.06 (or higher)
& the MySQL ODBC 3.51 Driver
& \htmladdnormallink{http://www.mysql.com}
{http://www.mysql.com} \\
\hline
\end{tabular}
\end{latexonly}
\end{center}
\etab
The Job Repository LCMAPS plugin rpm comes with four scripts. Only the 'jobrep-admin' script needs execution. The others are seperate SQL scripts to create the database. They are located in the (standard) location '/opt/glite/sbin/'.
The scripts are:
\bi
\item \texttt{jobrep-admin}, Script to install or remove a Job Repository database through the provided SQL scripts.
\item \texttt{jobrep-create-basic.sql}, SQL script to install the default Job Repository DB schema. The schema supports more than one type of service to hold relational information from.
\item \texttt{jobrep-create-CE.sql}, SQL script to install the Compute Element specific tables needed to store relevant relational information about the CE activities.
\item \texttt{jobrep-drop-total-database.sql}, SQL script to remove a Job Repository database completely.
\ei
\subsection{The Job Repository LCMAPS module}
The Job Repository can not exist without the parts that fill the database.
The packages listed here are needed for the frontend side of the Job Repository:
\btab
\caption{RPMs to be installed on the CE machine.
\label{tab:frontendrpms} }
\begin{center}
\begin{htmlonly}
\begin{tabular}{||l|l|l|l||}
\hline
RPM & min. version & description & URL \\
\hline
\texttt{lcmaps} & 1.2.x (or higher (should also work fine with very old LCMAPS version))
& the LCMAPS library ( = pluginframework + utilities)
& \htmladdnormallink{}
{} \\
\texttt{lcmaps-plugins-jobrep\_plugins} & 1.3.x (or higher)
& the LCMAPS plugin that stores the lcmaps info in the job repository
& \htmladdnormallink{}
{} \\
\texttt{unixODBC} & unixODBC-2.2.8
& the unixODBC libraries
& \htmladdnormallink{http://www.unixodbc.org}
{http://www.unixodbc.org} \\
\texttt{MyODBC} & 3.51.06 (or higher)
& the MySQL ODBC 3.51 Driver
& \htmladdnormallink{http://www.mysql.com}
{http://www.mysql.com} \\
\texttt{jobrepository} & 1.2.x (or higher)
& This package contains the api of the job repository
& \htmladdnormallink{}
{} \\
\hline
% \end{tabular}
\end{tabularx}
\end{htmlonly}
\begin{latexonly}
\tiny
% \begin{tabular}{||l|l|l|l||}
\begin{tabularx}{\linewidth}{||X|X|X|X||}
\hline
RPM & min. version & description + URL \\
\hline
\texttt{lcmaps} & 1.2.x (or higher (should also work fine with very old LCMAPS version))
& the LCMAPS library ( = pluginframework + utilities)
& \htmladdnormallink{}
{} \\
\texttt{lcmaps-plugins-jobrep\_plugins} & 1.3.x (or higher)
& the LCMAPS plugin that stores the lcmaps info in the job repository
& \htmladdnormallink{}
{} \\
\texttt{unixODBC} & unixODBC-2.2.8
& the unixODBC libraries
& \htmladdnormallink{http://www.unixodbc.org}
{http://www.unixodbc.org} \\
\texttt{MyODBC} & 3.51.06 (or higher)
& the MySQL ODBC 3.51 Driver
& \htmladdnormallink{http://www.mysql.com}
{http://www.mysql.com} \\
\texttt{jobrepository} & 1.2.x (or higher)
& This package contains the api of the job repository
& \htmladdnormallink{}
{} \\
\hline
% \end{tabular}
\end{tabularx}
\end{latexonly}
\end{center}
\etab
Note: The MyODBC has to be installed both on the clientside and on the serverside. The clientside needs a database driver that comes with the package to make a connection to a MySQL database on the backend.
When all these rpms are installed then we can move to the (re)configuration of this system.
\section{Configuration}
\subsection{LCMAPS}
LCMAPS is configured generally in the lcmaps.db file (by default located at '/opt/glite/etc/lcmaps/'. This file is used by the LCMAPS framework to specify:
\bi
\item The physical location on the disk of each modules (aka the plugins)
\item Which initialization string must be used for each module
\item The policies that are composed modules executed as a state machine. The outcome of each module (true or false) will decide which module to execute next. This means they can either return true or false which will create a controlflow through the policies.
\ei
For a more detailed explenation about using LCMAPS and it's policy file and the configuration of it you can take a look at the \htmladdnormallinkfoot{LCMAPS}{http://www.nikhef.nl/grid/lcaslcmaps/} specific information pages.
To start at the top of the policy file we will see the initialization string of the LCMAPS modules, including the one for the Job Repository.
Here are the initialisation options for the 'jobrep' module (note: jobrep is an alias for the module and it's parameter, this could be anything you like) :
Here is an example of a working initialisation string:
\begin{verbatim}
jobrep = "lcmaps_jobrep.mod"
"-jr\_config /opt/glite/etc/lcmaps/jobrep\_config"
\end{verbatim}
\subsection{The policies}
In the second section you'll see the policies defined. Here is an example of the policy section with one policy:
\begin{verbatim}
#My example1
example:
vomsextract -> vomslocalgroup
vomslocalgroup -> vomspoolaccount
vomspoolaccount -> posixenf
\end{verbatim}
Now I'll show you the same example only now it is extended with the Job Repository module:
\begin{verbatim}
#My example2
example:
vomslocalgroup -> vomspoolaccount
vomspoolaccount -> jobrep
jobrep -> posixenf
\end{verbatim}
As you can see, the 'jobrep' is to correspond with the Job Repository module and its initialisation string.
The Job Repository will get all the information available on that point in time when it is called in the policy evaluation procedure. The Job Repository plugin will get information that has been gathered and stored into the framework that other plugins gathered for the enforcement fase. In this example I used a policy that will map a user according to his/hers VO(s).
The Job Repository plugin will also work fine without the VO information in a user's certificate.
Here is a example for policies that uses the basic mapping methods:
\begin{verbatim}
#My example3
example:
localaccount -> jobrep | poolaccount
poolaccount -> jobrep
jobrep -> posixenf
\end{verbatim}
Again the 'jobrep' will be called before the actual enforcement. When you have a site that want a more dynamic handling of the users in a fabric then LDAP with the VOMSPoolGroups module comes in handy.
A policy for that would change into the following when you use 'jobrep':
\begin{verbatim}
#My example4
example:
vomspoolgroup -> vomspoolaccount
vomspoolaccount -> jobrep
jobrep -> ldapenf
ldapenf -> posixenf
\end{verbatim}
\subsection{The 'jobrep\_config' file}
A file called 'jobrep\_config' with (usually) root.root read-only (0400) privileges. In the initialisation string of the LCMAPS Job Repository Plugin you ca
n specify with "-jobrep\_config " where this file is located. The file must have these strict perimissions because this is the safest place to store t
he database, username and password combination. The system administrator has the freedom not to use the file as such, but we urge you to do so because every
authorized Grid user can (in most cases) access the directory '/opt/glite/etc/lcmaps/'. The database can hold non-disclosure information about the users an
d there jobs that are running and that have run on your farm.
All the needed 'Database connection parameters' can be located in the '-jr\_config' file which are:
\bi
\item \texttt{username=}
\item \texttt{password=}
\item \texttt{database=}
\ei
More detailed and needed configuration options will be shown in the ODBC specific odbc.ini file.
\subsection{The odbc.ini file(s)}
An ODBC initialization file will configure Data Source Names (DSNs) and link this name with a set of configuration parameters. Here is an example of such a file:
\begin{verbatim}
[ODBC Data Sources]
jobrepository = mysql ODBC Driver
[jobrepository]
Driver=/usr/lib/libmyodbc3.so
Port=3306
\end{verbatim}
The 'ODBC Data Sources' is an reserved section title where all the DSNs are specified. As shown here the 'jobrepository' is the only DSN and has the identifiable specification to be an 'mysql ODBC Driver'. Below that line my jobrepository's set of parameters is given. In this example the set of values is at its minimum. Actually the port number used to connect to the server (localhost) is the default port and can be thrown out too. The share-object also known as the Driver needs to be specified. This is needed for the ODBC coupling to work and talk the correct dialect of database talk to the MySQL daemon.
Allowed other parameters are:
\bi
\item \texttt{server=}
\item \texttt{username=}
\item \texttt{password=}
\item \texttt{database=}
\item and others which could even be specific per database type and version
\ei
The ODBC initialization information can be stored in the default locations '/etc/odbc.ini' or in the private space of the user (or admin) '~/.odbc.ini'.
\subsection{The Database}
The Job Repository LCMAPS plugin rpm comes with four scripts. Only the 'jobrep-admin' script needs execution. The others are seperate SQL scripts to create the database. They are located in the (standard) location '/opt/glite/sbin/'.
The scripts* are:
\bi
\item \texttt{jobrep-admin}, Script to install or remove a Job Repository database through the provided SQL scripts.
\item \texttt{jobrep-create-basic.sql}, SQL script to install the default Job Repository DB schema. The schema supports more than one type of service to hold relational information from.
\item \texttt{jobrep-create-CE.sql}, SQL script to install the Compute Element specific tables needed to store relevant relational information about the CE activities.
\item \texttt{jobrep-drop-total-database.sql}, SQL script to remove a Job Repository database completely.
\ei
* = The database schema is database specific. At first only MySQL will be supported. Other backends can be produced.
The 'jobrep-admin' script will guide you to setup the schema in a new database or to remove it dropping the database. Do think twice before you click the removal will result into wiped database unrecoverable by common tools.
By default there is a grant made one additional users in the database. That account is used by the LCMAPS plugin to work with the database.
This has to be done \texttt{manually} because it contains the setting of the username and password for the LCMAPS module and you will have to fill in the password for the root database-user. The username and password for the LCMAPS module must be in sync with that of the 'jr\_config' file.
%
% Finish
%
\end{document}
lcmaps-plugins-jobrep-1.5.7/doc/jr/jr_include.tex 0000644 0001750 0000144 00000001025 14574533163 016707 0000000 0000000 %
% definitions affected by configure
%
\newcommand{\packver}{jobrepository-1.3.3}
\newcommand{\package}{jobrepository}
\newcommand{\version}{1.3.3}
%
% definitions
%
\def\bi{\begin{itemize}}
\def\ei{\end{itemize}}
\def\bd{\begin{description}}
\def\ed{\end{description}}
\def\beq{\begin{equation}}
\def\eeq{\end{equation}}
\def\bdm{\begin{displaymath}}
\def\edm{\end{displaymath}}
\def\btb{\begin{tabular}}
\def\etb{\end{tabular}}
\def\bfig{\begin{figure}}
\def\efig{\end{figure}}
\def\btab{\begin{table}}
\def\etab{\end{table}}
lcmaps-plugins-jobrep-1.5.7/doc/jr/Makefile.am 0000644 0001750 0000144 00000013072 14574533163 016110 0000000 0000000 ##
SUFFIXES = .tex .aux .dvi .log .ps .bbl .pdf .html
LATEX = PATH=/usr/local/bin:$$PATH latex
PDFLATEX = PATH=/usr/local/bin:$$PATH pdflatex
LATEXHTML = PATH=/usr/local/bin:$$PATH latex2html
BIBTEX = bibtex
LATEX_ARGS = --interaction=nonstopmode
LATEXHTML_ARGS = -no_footnode \
-link 1 \
-split 4 \
-t "Guide to Job Repository" -address "Oscar Koeroo, `date +"%A %b %d %Y"`" \
-local_icons
DVIPS = PATH=/usr/local/bin:$$PATH dvips
PREVIEWER = xdvi -s 3 -paper a4 -expert
PS_PREVIEWER = gv -scale -1
PDF_PREVIEWER = xpdf
HTML_PREVIEWER = netscape
EXAMPLES =
PACKAGEFILES = LICENSE
PACKAGEFILESSRC = ../LICENSE
HDRS = jr_include.tex
TEXS = jr.tex $(HDRS)
AUXS = jr.aux \
jr_include.aux
DVIS = jr.dvi
LOGS = jr.log
TOCS = jr.toc
PSS = jr.ps
PDFS = jr.pdf
HTMLS = jr.html
userdocdir = $(prefix)/share/doc/@PACKAGE@-@VERSION@
userdoc_DATA = $(DVIS) $(PSS) $(HTMLS) $(PDFS) $(EXAMPLES) $(PACKAGEFILES)
apidocdir = $(userdocdir)
### apidoc_DATA = apidoc
EXTRA_DIST = jr.tex jr_include.tex $(EXAMPLES)
#
# teach 'make' how to convert LaTeX to dvi, and dvi to postscript
#
.tex.dvi :
@echo LaTeXing $(<:%.tex=%)
TEXINPUTS=:./style: $(LATEX) $(LATEX_ARGS) $<
-@while [ `grep -c 'Rerun to get' $(<:%.tex=%.log)` -ne 0 ]; do \
echo Rerunning to get cross references right ; \
TEXINPUTS=:./style: $(LATEX) $(LATEX_ARGS) $< ; \
done
.tex.pdf :
@echo PDF-LaTeXing $(<:%.tex=%)
rm -f $(<:%.tex=%.aux)
TEXINPUTS=:./style: $(PDFLATEX) $(LATEX_ARGS) $<
-@while [ `grep -c 'Rerun to get' $(<:%.tex=%.log)` -ne 0 ]; do \
echo Rerunning to get cross references right ; \
TEXINPUTS=:./style: $(PDFLATEX) $(LATEX_ARGS) $< ; \
done
.tex.html :
@echo LaTeX2html-ing $(<:%.tex=%)
TEXINPUTS=:./style: $(LATEXHTML) $(LATEXHTML_ARGS) $<
@if [ -e $(<:%.tex=%.html) ]; then \
if [ -L $(<:%.tex=%.html) ]; then \
rm $(<:%.tex=%.html); \
ln -s $(<:%.tex=%)/$(<:%.tex=%.html) $(<:%.tex=%.html); \
fi; \
else \
ln -s $(<:%.tex=%)/$(<:%.tex=%.html) $(<:%.tex=%.html); \
fi
# TEXINPUTS=:./style: $(LATEXHTML) $(LATEXHTML_ARGS) $< > /dev/null 2>&1
.dvi.ps :
$(DVIPS) $(DVIPS_ARGS) -o $(<:%.dvi=%.ps) $<
#
# possible targets; e.g. do 'make ps_preview' to preview the PostScript file
#
apidoc: apidoc/html/index.html apilatexdoc
apidoc/html/index.html:
make -C ../ apidoc
apilatexdoc: make -C apidoc/latex ps
make -C apidoc/latex pdf
# apidoc/html/index.html
userdoc: $(apidoc_DATA) $(userdoc_DATA)
dvi: $(DVIS)
ps: $(PSS)
html: $(HTMLS)
pdf: $(PDFS)
$(DVIS): $(TEXS) $(EXAMPLES)
$(AUXS): $(DVIS)
$(PSS): $(DVIS)
$(HTMLS): $(TEXS) $(AUXS)
$(PDFS): $(TEXS)
$(PACKAGEFILES): $(PACKAGEFILESSRC)
echo "Copying $(PACKAGEFILES)"
@for packagefile in $(PACKAGEFILES); do \
cp ../$$packagefile . ; \
done
clean:;
rm -f $(DVIS) $(LOGS) $(AUXS) $(PSS) $(TOCS) \
A4jr.ps jr.pdf jr.html jr.out
rm -rf jr
rm -f $(PLUGINEXAMPLES)
rm -rf apidoc
preview: $(DVIS)
@echo "Starting DVI previewer."
@for i in $(DVIS) ; do \
$(PREVIEWER) $$i > /dev/null 2>&1 & \
done
ps_preview: $(PSS)
@echo
@echo "Starting postscript previewer."
@for i in $(PSS) ; do \
$(PS_PREVIEWER) $$i > /dev/null & \
done
pdf_preview: $(PDFS)
@echo
@echo "Starting pdf previewer."
@for i in $(PDFS) ; do \
$(PDF_PREVIEWER) $$i > /dev/null & \
done
html_preview: $(HTMLS)
@echo
@echo "Starting html previewer."
$(HTML_PREVIEWER) file://$(PWD)/jr/jr.html > /dev/null &
hard:; @touch $(TEXS)
##
### Problems in here!
## install-data-hook:
# @echo Installing html files of latex2html documentation
# @( \
# cd jr; \
# for htmlfile in * ; do \
# $(INSTALL_DATA) $$htmlfile $(DESTDIR)$(userdocdir)/$$htmlfile; \
# done \
# )
# @echo Creating apidoc directories
# $(INSTALL) -d $(DESTDIR)$(apidocdir)/apidoc/html
# $(INSTALL) -d $(DESTDIR)$(apidocdir)/apidoc/latex
# @echo Installing html files of apidoc documentation
# @( \
# cd apidoc/html; \
# for htmlfile in * ; do \
# $(INSTALL_DATA) $$htmlfile $(DESTDIR)$(apidocdir)/apidoc/html/$$htmlfile; \
# done \
# )
# @echo Installing PostScript and PDF files of apidoc documentation
# $(INSTALL_DATA) apidoc/latex/refman.ps $(DESTDIR)$(apidocdir)/apidoc/latex/refman.ps
# $(INSTALL_DATA) apidoc/latex/refman.pdf $(DESTDIR)$(apidocdir)/apidoc/latex/refman.pdf
####
# @echo Creating apidoc manpage directory
# $(INSTALL) -d $(DESTDIR)$(prefix)/share/man
# $(INSTALL) -d $(DESTDIR)$(prefix)/share/man/man3
# @echo Installing manpages for LCAS interface
# $(INSTALL_DATA) apidoc/man/man3/LcasInterface.3 $(DESTDIR)$(prefix)/share/man/man3/LcasInterface.3
# $(INSTALL_DATA) apidoc/man/man3/lcas.h.3 $(DESTDIR)$(prefix)/share/man/man3/lcas.h.3
# $(INSTALL_DATA) apidoc/man/man3/lcas_types.h.3 $(DESTDIR)$(prefix)/share/man/man3/lcas_types.h.3
# $(INSTALL_DATA) apidoc/man/man3/LcasPluginInterface.3 $(DESTDIR)$(prefix)/share/man/man3/LcasPluginInterface.3
# $(INSTALL_DATA) apidoc/man/man3/lcas_plugin_example.c.3 $(DESTDIR)$(prefix)/share/man/man3/lcas_plugin_example.c.3
# $(INSTALL_DATA) apidoc/man/man3/APIforLcasPlugins.3 $(DESTDIR)$(prefix)/share/man/man3/APIforLcasPlugins.3
# $(INSTALL_DATA) apidoc/man/man3/lcas_modules.h.3 $(DESTDIR)$(prefix)/share/man/man3/lcas_modules.h.3
# $(INSTALL_DATA) apidoc/man/man3/lcas_defines.h.3 $(DESTDIR)$(prefix)/share/man/man3/lcas_defines.h.3
# $(INSTALL_DATA) apidoc/man/man3/lcas_log.h.3 $(DESTDIR)$(prefix)/share/man/man3/lcas_log.h.3
# $(INSTALL_DATA) apidoc/man/man3/lcas_utils.h.3 $(DESTDIR)$(prefix)/share/man/man3/lcas_utils.h.3
# $(INSTALL_DATA) apidoc/man/man3/lcas_vo_data.h.3 $(DESTDIR)$(prefix)/share/man/man3/lcas_vo_data.h.3
lcmaps-plugins-jobrep-1.5.7/doc/install_instructions.txt 0000644 0001750 0000144 00000004464 14574533163 020501 0000000 0000000 Date: August 31, 2012
Author: Oscar Koeroo
QUICK INSTALL GUIDE for the LCMAPS Jobrepository plug-in
========================================================
Additional packages to install
-------------------
mysql-server
mysql
unixODBC-libs
mysql-connector-odbc
lcmaps
optionally: unixODBC
Tested front-end tools and services
-----------------------------------
gLExec
globus-gridftp-server
globus-gatekeeper
Possible other front-end tools and services
-------------------------------------------
SCAS
lcmaps-rest
gsi-openssh-server
Front-ends that will likely NOT work
------------------------------------
WMProxy
StoRM backend
Motivation:
The front-ends which do not use an LCMAPS interface based on certificates
can currently not be supported. It is a requirement for the 1.5 version to
be able to work from a certificate chain.
Example LCMAPS configuration
----------------------------
jobrep = "lcmaps_jobrep.mod"
"--dsn MySQL-test"
"--username root"
"--password worteltjes"
example_plugin_policy:
verifyproxy -> vomslocalgroup
vomslocalgroup -> vomspoolaccount
vomspoolaccount -> tracking_groupid
tracking_groupid -> jobrep
jobrep -> posix_enf
Example /etc/odbc.ini file
--------------------------
[MySQL-test]
Description = MySQL test database
Driver = MySQL
SERVER = 127.0.0.1
PORT = 3306
DATABASE = jobrepository
Database connection test
------------------------
To test the connection from the jobrep plug-in to the database use the "--test"
option. The plug-in will not store any information in the database, but it will
test if the configured DSN name is available on the system and if the database
connection can be established using the odbc.ini file details. The LCMAPS log
should have an entry at level LOG_INFO.
Example:
jobrep = "lcmaps_jobrep.mod"
"--test"
"--dsn MySQL-test"
"--username root"
"--password worteltjes"
Note on the lcmaps.db and odbc.ini configuration
------------------------------------------------
1.) Notice the --dsn matches the DSN shown in the .ini section header.
2.) Also notice that the posix_enf plug-in is executed _after_ the jobrep
plug-in. The motivation is to be able to use privilege separation and with
that protect the database password.
lcmaps-plugins-jobrep-1.5.7/doc/lcmaps_jobrep.mod.8.in 0000644 0001750 0000144 00000013763 14574533163 017544 0000000 0000000 .\" Hey, EMACS: -*- nroff -*-
.\" First parameter, NAME, should be all caps
.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
.\" other parameters are allowed: see man(7), man(1)
.TH LCMAPS_JOBREP.MOD 8 "August 31, 2012" @PACKAGE_NAME@ @VERSION@
.\" Please adjust this date whenever revising the manpage.
.\"
.\" Some roff macros, for reference:
.\" .nh disable hyphenation
.\" .hy enable hyphenation
.\" .ad l left justify
.\" .ad b justify to both left and right margins
.\" .nf disable filling
.\" .fi enable filling
.\" .br insert line break
.\" .sp insert n+1 empty lines
.\" for manpage-specific macros, see man(7)
.SH NAME
lcmaps_jobrep.mod \- jobrepository LCMAPS plug-in
.SH SYNOPSIS
.B lcmaps_jobrep.mod
.RB [ \-\-test ]
.RB \-\-dsn
.IR
.RB \-\-username
.IR
.RB \-\-password
.IR
.SH DESCRIPTION
The LCMAPS Jobrepository plug-in stores credentials and the resulting account
mappings into a relational database. This plugin will link up all the known
in-process information from LCMAPS core memory and stores it in a database. This
plug-in uses ODBC (http://en.wikipedia.org/wiki/ODBC) to connect to the
database.
The current state of the mappings between various credentials and Unix accounts
is stored in an open database on disk, but this information can change over
time through (regular) system administrative interventions. This state is now
preserved in a relational database with the added benefit of being accessible
by other systems, e.g. GridSAFE and build-up an easy to backup historic view on
the mapping state.
Quite some systems seem to dig up data by trawling log files, e.g. to construct
accounting data records. This method is subjected to the settings of the
sub-systems which control the format of the log file output. Log trawling tools
are interacting with the log files as a glorified API. This lowers the ability
for tools, e.g. LCMAPS, to alter their log output. By offering the LCMAPS
Jobrepository plug-in as an alternative with the added benefit of offering
the data in a structured fine-grained database with the ability of an
historic view the intend is to avoid the need and/or requirement for log
file trawling.
.SH DATABASE SCHEMA EXTENSIONS
The schema can be used to link up account mapping and/or credential mapping
results originating from other credential types and link up more fine grained
details from the specific work environment, i.e. a Gatekeeper and GridFTPd will
be able to add service specific information together with the mapping results.
.SH FUTURE
The LCMAPS Jobrepository plug-in is currently limited to MySQL and MariaDB
despite its usage of the ODBC database interface. The intend is to remove this
limitation and make the plug-in work with other database, e.g. PostgreSQL,
Oracle and SQLite.
.SH OPTIONS
.TP
.BI \-\-test
When enabled the plug-in will only test if the connection to the database can
be established through the ODBC coupling. The test will verify the correctness
of the DSN, Username and Password combination. The plug-in will announce an
LCMAPS SUCCESS when the connection was established, and a FAILURE when it was
not able to establish the connection.
.TP
.BI \-\-dsn\
This will select the Data Source Name (DSN) that has been set in a
\fBodbc.ini\fR file. Use the \fBodbc.ini\fR file to configure the database
driver, server/host, port number and database name. See below for an example
odbc.ini file.
.TP
.BI \-\-username\
Specifies the database username that the LCMAPS module must use to
authorize itself with the database.
.TP
.BI \-\-password\
Specifies the database password that the LCMAPS module must use to authorize
itself with. You can omit the setting if you set the password in the odbc.ini
file.
\fBWARNING\fR: Be careful to assess the read permissions on the lcmaps.db
file to be exclusive to the service using this file, i.e. it's probably best to
make the file exclusive to root:root.
.SH "RETURN VALUES"
.TP
.B LCMAPS_MOD_SUCCESS
Success.
.TP
.B LCMAPS_MOD_FAIL
Failure.
.SH EXAMPLES
Notice the \fB\-\-dsn \fR matches the \fBDSN\fR shown in the .ini
\fBsection header\fR. Also notice that the posix_enf plug-in is executed
\fBafter\fR the jobrep plug-in. The motivation is to be able to use privilege
separation and with that protect the database password.
.TP
.B Example lcmaps.db
.nf
jobrep = "lcmaps_jobrep.mod"
"\-\-dsn \fBMySQL-test\fR"
"\-\-username root"
"\-\-password worteltjes"
example_plugin_policy:
verifyproxy \-> vomslocalgroup
vomslocalgroup \-> vomspoolaccount
vomspoolaccount \-> tracking_groupid
tracking_groupid \-> jobrep
jobrep \-> posix_enf
.fi
.TP
.B Example /etc/odbc.ini file:
.nf
[\fBMySQL-test\fR]
Description = MySQL test database
Driver = MySQL
SERVER = 127.0.0.1
PORT = 3306
DATABASE = jobrepository
.fi
.SH SUPPORTED\ INSTALLATIONS
.TP
.B Tested front-end tools and services
gLExec
.br
globus-gridftp-server
.br
globus-gatekeeper
.TP
.B Likely to work
SCAS
.br
lcmaps-rest (only the Full-SSL interface)
.br
gsi-openssh-server
.TP
.B Front-ends that will likely NOT work
WMProxy
.br
StoRM backend
.SH LIMITATIONS
The front-ends which do not use an LCMAPS interface that provides certificates can currently not be supported.
It is a requirement for the 1.5 version to be able to work from a certificate chain.
.SH BUGS
Please report any errors to the Nikhef Grid Middleware Security Team
.
.SH SEE ALSO
.BR lcmaps (8),
.BR lcmaps_jobrep.mod (8),
.BR mysql (1).
.br
More information can be found on-line at
.UR https://wiki.nikhef.nl/grid/Site_Access_Control
the Nikhef Wiki on Site Access Control
.UE
and
.UR https://wiki.nikhef.nl/grid/LCMAPS
the Nikhef Wiki on LCMAPS and other plug-ins
.UE .
.SH AUTHORS
The Jobrepository and the LCMAPS plug-ins were written by the Nikhef
Grid Middleware Security Team .
lcmaps-plugins-jobrep-1.5.7/doc/jobrep_database_design.pdf 0000644 0001750 0000144 00000221536 14574533163 020600 0000000 0000000 %PDF-1.3
%Äåòåë§ó ÐÄÆ
4 0 obj
<< /Length 5 0 R /Filter /FlateDecode >>
stream
xåœ[o ÉuÇßûSôã0¹Ý]Õ7¿Ù²d#¶%ä%™&½Ü+‹”ë/ëÏ’ß©ªsºú6=ÔÊñC@`5ÛS×sùŸkÏÇòåÇò›ßß>ÝÜþõÓç÷åÓ=ƾ¬øk‡²i¯»¾íʶ¹®*_Þ<–ßüëc]þæC˜˜Æ9oã†AÆq\³ç;Wwu¶ [ ̬‡6[Ñ/²¢kŽÈ ÃÎé„íb ê¸!Ü$°[Œ“×M\/¿q¿'Lãf7 ãX¯êõzãb ëé¸Ùzu¥k7žôUÙôãõèê²öcFÃÚ¸¢Cå:tì3*ÖƘÚ5ÊiçÛë¦- #•ÓÆ )”L#{—¯i¬©‡:¬ o꺺îj_ι]wt(‹ÚпkcŠ:WmƒhèQG:TˆªCÇ n‰ëµ±II54¥¯ºDÕp-]Õ8¥CYU‡6UNfâU7Q€£ö=bŸKg3±*¤‘3ùlŒSˆ›Rµá¤
D^,j¬Ò¡,jC端t(¼òü_¯j¼Ò¡áþiè|Õ‰WÞëY»¦¿ö¾YžuâUʪ6t¾jÆ«‰¨ÇÒ73²f¼ŠC…:4"X’ g¼jš¨W£/¯Ö¶ Û‘…ÛñºM"€¦%¸«' (µÒ tYc—ͨågê»êòÛ².¿/Ù»¼/¿ùãíÃûO÷?Þ¾þððáéþñöÓÓýM&óú¹._¿ dÊ7¯é(cWüÃQ[, Ø¡ñM_!ràÓ0öMùˆðåèPnß]×ÃàŠ‡ò
^±wÅÞ»k¡‹mß²VÕ_=XñXº †6 éC·[× ¬å†úº®Ùª©Œ¥}(¿ãéz¶ì®róÌùåïù¦t :‚é"òôþºªÇÅÓmyǘH¡ÝSr'™î?vå4¿d~Ú±)ر’Ý*Èœ-ˆµ XÎíۯߖ ®ü]ñï•k®ç›«¡|‹ñûp¤¨Ë·w啧›ÛW"4Myzúô
6ðá>¹×~UþwùöÛò·oƒÉ4®Í6ùÙÙØÛ¾P"îûüYÿ“~ø^?ܾ*â‘n8ÒñÆ"ã;×]¡7¶íVÏÓ&"ä&y±^C³¯ëÆ,4+0;ãÌ\¬•ÉÞ͘\7"$ÊdÙê “ë
ÞärÓ]û
1.}¼3¶ßî|3‘V¹O>AÀö¿çWÏ6^s¹º š¾s]_&6onüÞö3Z?¿*&æ.hÍÉç´î»à'¨b4~ŸÖrDô1(”xL¹BÅy—Ò?Z¯¯†e§ãõ\gö€}¢9˜&‰¸+k ×Á—g”DCQ¡ú±T:6U#ªÅˆ~&‡.1ñ;9°¿ÀZ5kÿñƒÂÈã³™©»` õ;Ú ôÉ;µ(‡ú·}¾ !ÜÕÅÓÝÇ÷l>—A•"e Y›‰Q[îr?Z™X@ð4cATϺkwÁ®(lR´ÜchdƒžP*‡ô"Zî •¨ð"ŽG}€ÖE»=±ž„19KxPœ{þM#ñÄ©BÒ\w üe^ ÏÌ›²‰3úl¸SMtJEô üO
ÉcðoÂg2÷“‰¡
²ï° Úå_M¤Ê€lûœÛp©’ºôÄNŸïÙYåôpñ\FtIÐgåc½_rîŒ>&Ì馓i
Þ—š&Š¹÷s´Æ¤bæ~…‰¹“ ü¯
1jÏ=° d@ÉBf/|±Óç îzÑWj…mJÎÌBŠ Ä1¦È˜5C™w©ôoܳT.è\ú8ã»&ÆHñ¿èûn)ý8JÛç<þ…E9ýeGú·ß–þÅšÄTÇ÷+OFŸ\úýaŠ
é?‰&Hÿ&AæaÀ‘ôGd°€ J?DŸK‘r¹ÚŒULeu¸Zø)u- }é‡ýk2Í“íPt6íøÇé§m×ïoqš†–¨z‰£pý¼è'гA»¢_žœœ´’ÉI’éW¾ö„§^\~ÑøæÉšµœ?zU{ÿdÇÓ¬‚ Ê\¸õÁ
Òì⤳mO}`ËÍÆ—\µÞ7`vHÛð+[ñ‹yA uųl˜^±ª“’–Ëtò((4t>¸«I'/‹ •y7ÓÆ›Ð%æúŠÉúÛ¹í&+à< }™Çð%wÌ|÷)#<ÝÒeg08\á°ûAcm»Û³A¾™?jµ+ÌX§a@A‚?4 «a€*I,5š´ŸÃ¢LJ’Ò‚ª$ó†d¢3zQ’ÀPò¾¢6–ÇÍ)0´ ßÝÙÇ”—ÅÎ)2ÌØ#£%qŸ”t6FÑÊ2ç
x¶nÆž(¦ QQ7(¦Ô>Söµ†lCÕZ®(¹É¼šyš}æ]’"’¤#X”Í’ Û`DþÊW åÕ2[´‡F;«çpÔ¿nðn½(&å+ÃÑÇÑ+f~Š)«)”)¦iÑoÙ ûÎÛ2ùW“ϸ£|*š Vþ …à&)=<Í»ÄF©æ âœs=õª宅Ï#Æ™²¬õ¯|‰þ§sú—BÜcýKj]HÜ\¢Hp䣔æ£$U.Byn‡e§$TYô•ªì“i21êrýŠùÄ£˜ª#’+sÍeÎ3 Ÿ{ʼ³z.“2/=«ÌÁ|iFnyœèFùqT™sïâ¢Ìa¬â¢Ü¶.g`½<ç†%Ósf ‚¥8mý)ÿW5IO÷jþ Íä<ý킼ž
¨(÷L@@ÅÔ'ÇWtèo仌ÕL®ïŒg[¨’\¯€*)Dø
¨RLµûËQW6‹|U63ô™Íì½ëZ’3´Á8<£±¥Çb¤ÎÓ4 ¶ŒUëS¿†¦9”æé-k»kO2T†d29H,0ÏèÚ–:œ,ÝãYË‚®gÁïèøYÏ>.«É¬Jöô¾ˆ¬âž”Ï9°cÏÚëž•ìIûÝ' M!«ÙœX`0TΊ3(xE¾¢3G®28f5hÙ芘ԫ[Of)Ö
<üßPH¨ÜU} +]Hr}“z¬ÚPÃóȤ¾ÁhŽ.ѹ ´¹P¤8_hlºâÓ˜&UÃalúp:ºÉØѻẠàªìH” ¶½v`CÜq=7Ò£†&ä
¶ôuÆ=—³Í\Ÿé õ-ÔñÒO'd|ÃMƒ zš¿å$žVÑD&/íH4at…¤Á`{.ÞK«8,õÐ I½H(ÖÃÎñ»1Rek¶Qe· Äã¯Ò´$NLç‚É–=Cç,žö™’ìÉûì UÄ«¢+U¨¢³¹‰Í~Cºí¨ýG®½¹rDzcƒªAvh2½®G(†ìHæî ¹Iœž¾"ëZség-¡+«óLˆV°>p?¼$®"ݺÍ@®'œcòWEø fÒU¼Äõ kñDø4²{CöŽmUôÏ ?¬DÇ0^M<þ =e-<²®‘wDhÓ h°æ¬ŽäÙ8™Ç©$;×)ç—~c™]ÈåÓì£ó‹.xR'$ãä“]åµ VÖ
7 W?*﹄µèÁÉä ŽftY Ç®‡BNÛ÷½03ˆÈˆ°ËúÑ8°ž}t¡[G€çäMGzOá§CÃC
g?mÛ#Ϩ“8³‚6r[*Â4‚d'
Yˆ4®ùVІ4GD 4cöy½
ðHù…‹‹Ó?¡
{‚Œ²@Ù³’=3’=ãìг—°êˆ* !íH+:TµæužÁÎ ÃÛ¦'½v*™ f@ªÀ— ˆµj‰*¤ã°®p¼uTǽæhÕS>(6fŸ§J8_+f’=…*íà{а‘
•ì) þ$ ‘=ÙS0¸jøR¤½YÎævF•s!0IL†´ÓÜ>ÒQü€2¨Ú˦‚p²’Cn±è }Ðu…=‘ «â¥¢†h%mÄnT~@Û ¹í6è
Ú˜f—Ùì;â‰óA“̪ؓE“»'{J²€= ‰¯{Áùä}$¢»¡pœ
Ci²5ÛhrÆ.‰ù=Æ"Фáý5´v dÁ%S,œµü@:ùh8 q( "`ç§
1\áåu ÷Ð#i
»ž|(',…
`G¹ª¯‰ åp¨„ì(H;v!NŮʛŒ“Øp€†ºc>‹A„Å…å–7‘Rï*Áÿ pǦs¶K4[¢d™ž:WçÓe#’Í^ÿý»j…è“»¸Æ, øvµ,Øïe17—ž…¨ÒûâñØVK~ý æü0¢ú‹w+Òí¶úÏ-ÄZ·¾—;ï!]]hVHø<ãtjUV‹J%K N¼±$ —µ¤›»Ý®XŒÔ ¼n5X,ûââBŠÚ.*î ŠÓòkAãJ1ŠµƒZºq£ø‘H|{ˆÈ?{1‹æ*º ðåôPiA»é|o‡ dvxdh|ðþ¢.Ék3€¨ü¡¼¸Aâ…Š_áÄ{,Š7å°O΃d%îYÝð¹i 6ÿ ÀçŸ$Í=D"Y W,@{Ýa›Â~>ì'€\ƒ£ÄdະŸÃÆ.Ñ;^Ïã Þ3T uÁ—Ø™y‡‚”Š3#¯)*éô¼
¶÷²—«ANñÿf¯{mëö¼2wqmt{í ‰¶ƒÏ¾Zó,…¬ò~e»‹á‚ÓÄûq@ÍS¼,sgxeY
ËVYaôËó1Iã¶3w;eºF%K/Š†áÞŽbD‰Rà˧m[¶i%¥ó>ðá¨w^^)]'Bž§_"ÏøŠ©P 3BeÂ0KK¤g»fbö5Ê«V©=›©™’²;¬•Øÿ h|Äðma®„ï‡`¡N˲«Mm]/‹…2íy-Ûkÿ³Àâ‚ÓüL°ØJ
'þ'…IÔËÀÂ$êKÀBéüÿ ,ÒºÅéçE‡ç~s@= é¨"¨Uc-:<I ˜kaórßb.º14ÀÎœ‹\§I ´=ÅÑe$" 6[™9vGdÖòÙ\+ á½Ê,ßýåƒx –“hpÖèÅ2gDŽït¹XÖËyx±,é¿s±ÌÚ±"&ªó‰Áæ!l˜‘uSÁP¥ŸÍÛv¦¥Œ~Ií·è‡ ÊïYœ Ü‚ Êk/µñVµ F+'Ÿõív̹°ýl2â6žUÉfDÇC’?É;@ìð[ $”B}J^—0èÌ[èÁѧ ‚Z}É/·ä-ÙQ‰hNVš ÂoBL})ÛŽ>L
-Ù—6An¯ë9Y¾Ô’½\ó àèoÞtvšx¿L7ÍÑ7³l0¢zh<ÿ ûd ¬_É:fõ ýòd¿Cñ˜ K¯}iYáP¹´¤7÷æMÆû¯õ6IZøõ“\Z.K^G1“´ä4”:Ù(/§o¼'az¢šdïôB¨ &šHød$4·z…!:— ôÿ¿‘XXåyðOɘʡ¹©—`á(täOåzò§á·1öi&U¦C{´q1señ6º¿j
w5{—-a5¿n3jÂKñº¼Â(ºŠ*ÉQ÷<Î<½Ý|áá¢E)ÿ Ò*Ūgªì*ËÉ4f]¬¿LT.Ó¿ÿ®Æóµ‚ßï~õû7úí·0'J°ýÜŠ~õGýÆ8›”£8Ù¤g3Öz ûêéoºÅÎ+M|¯=¶¹
‘Lá:}œLÎEDTθ OÿùsC†ƒ²ÞÕrQ€ÏHô4QÄ(a}%KÖ4zýëÄ«ê+Üy+ÿú+Kh(›¾SæÚ)Ÿ–§ûp(úýnŒ)OÊÒ³iÓÍí .ãœz :E@U
ÖGoë7zf;ÞÆÀzy‡ßÙЧ»²^¢Ñõjýð‹tåյĆºü’3÷@ Ÿ? _ã0©‹{@ò¥áu¦Cg]±ä LÓVÈÅ.ËÐÞS~¤Vx‘{@·«¤ò ¼ö"üT$÷^p¿½úÌœ€—®£wñÿ ¸}šmWÈîºRyûøãçÛwßøÓ»û î_}Y툯É+ƒŽŒ’ò5òiÚ‹øºoÈ ±u«—Œ$3—ø× VØ\nS
]M¥ÍÍ™,ytÊÏXò ©g%éšiZÒûÒõÂÏ´•}2RâãßÑ_ :Éù
?¬e‚ÐÏUK™††¡ Ý”W©§Òæ ¿ZRSÄ%g/].uè-–¢9ýß±x(m¢‹Ùç«‚K¢»£Ìª)Ü=KGˆìédÏš7UÕØE#µx”»–—Ä=¡`™fÙl¹ÚQ@~~’0šÒeEãI_v¥[‡"²kB…mÙAÖ:¬BÓÀ
ÁÄs‚ ½3R…¦GÂ5Ôü| ¬~8OŠÔ
¿’Èy…
T¾7f Ý@èæ:võ´!>S’] “¼´‡Ô8ôöt~–Lº3
ák߀ИÃâx Ñœš*' ~܆/¥´±7f_ÀWfÑA÷UhÈÀ¡”óÁCö < ¥" ÷¤rÅ3§žøšf¾Ò#³¨"ž#-,bÂ
Z"J 5Öf;l%'.ˆøÊB ïÙÒæäúž2ÖÑx‚dÑÓB›ÌGDi'à÷iÄŽÍC:»ÈfŸ'‰ Nf9Ù³A„Ç–ÒZܳaO„Ž=ùÉ4HÒQ–eOô˜6ùÐäöÝæl¹É þ¼èáD
endstream
endobj
5 0 obj
5650
endobj
2 0 obj
<< /Type /Page /Parent 3 0 R /Resources 6 0 R /Contents 4 0 R /MediaBox [0 0 783 559]
>>
endobj
6 0 obj
<< /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] /ColorSpace << /Cs1 73 0 R
/Cs2 74 0 R >> /Font << /F2.0 76 0 R /F1.0 75 0 R >> /XObject << /Im27 59 0 R
/Im20 45 0 R /Im23 51 0 R /Im4 13 0 R /Im21 47 0 R /Im26 57 0 R /Im22 49 0 R
/Im6 17 0 R /Im33 71 0 R /Im12 29 0 R /Im15 35 0 R /Im11 27 0 R /Im17 39 0 R
/Im10 25 0 R /Im13 31 0 R /Im2 9 0 R /Im16 37 0 R /Im1 7 0 R /Im25 55 0 R
/Im3 11 0 R /Im28 61 0 R /Im24 53 0 R /Im29 63 0 R /Im32 69 0 R /Im8 21 0 R
/Im31 67 0 R /Im14 33 0 R /Im30 65 0 R /Im7 19 0 R /Im9 23 0 R /Im19 43 0 R
/Im18 41 0 R /Im5 15 0 R >> >>
endobj
59 0 obj
<< /Length 60 0 R /Type /XObject /Subtype /Image /Width 144 /Height 46 /Interpolate
true /ColorSpace 77 0 R /SMask 78 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ
 ÷Oíì( 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`àM
endstream
endobj
60 0 obj
110
endobj
45 0 obj
<< /Length 46 0 R /Type /XObject /Subtype /Image /Width 139 /Height 34 /Interpolate
true /ColorSpace 77 0 R /SMask 80 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ Ã ùS ä…PaÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 7b
endstream
endobj
46 0 obj
84
endobj
51 0 obj
<< /Length 52 0 R /Type /XObject /Subtype /Image /Width 212 /Height 46 /Interpolate
true /ColorSpace 77 0 R /SMask 82 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOm /ˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0ðrH
endstream
endobj
52 0 obj
151
endobj
13 0 obj
<< /Length 14 0 R /Type /XObject /Subtype /Image /Width 97 /Height 34 /Interpolate
true /ColorSpace 77 0 R /SMask 84 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOm
?ˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€^&¦
endstream
endobj
14 0 obj
67
endobj
47 0 obj
<< /Length 48 0 R /Type /XObject /Subtype /Image /Width 161 /Height 46 /Interpolate
true /ColorSpace 77 0 R /SMask 86 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ Ã ùSßà…PaÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ÞÀ VÊ
endstream
endobj
48 0 obj
121
endobj
57 0 obj
<< /Length 58 0 R /Type /XObject /Subtype /Image /Width 212 /Height 34 /Interpolate
true /ColorSpace 77 0 R /SMask 88 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ
 ÷Om( 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ xTx
endstream
endobj
58 0 obj
117
endobj
49 0 obj
<< /Length 50 0 R /Type /XObject /Subtype /Image /Width 161 /Height 34 /Interpolate
true /ColorSpace 77 0 R /SMask 90 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ
 ÷Om7ˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ | @&
endstream
endobj
50 0 obj
95
endobj
17 0 obj
<< /Length 18 0 R /Type /XObject /Subtype /Image /Width 97 /Height 34 /Interpolate
true /ColorSpace 77 0 R /SMask 92 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOm
?ˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€^&¦
endstream
endobj
18 0 obj
67
endobj
71 0 obj
<< /Length 72 0 R /Type /XObject /Subtype /Image /Width 112 /Height 34 /Interpolate
true /ColorSpace 77 0 R /SMask 94 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOm Oˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ÏÀ ,
endstream
endobj
72 0 obj
74
endobj
29 0 obj
<< /Length 30 0 R /Type /XObject /Subtype /Image /Width 139 /Height 34 /Interpolate
true /ColorSpace 77 0 R /SMask 96 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ Ã ùS ä…PaÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 7b
endstream
endobj
30 0 obj
84
endobj
35 0 obj
<< /Length 36 0 R /Type /XObject /Subtype /Image /Width 181 /Height 46 /Interpolate
true /ColorSpace 77 0 R /SMask 98 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ
 ÷Om( 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€oa’
endstream
endobj
36 0 obj
132
endobj
27 0 obj
<< /Length 28 0 R /Type /XObject /Subtype /Image /Width 139 /Height 70 /Interpolate
true /ColorSpace 77 0 R /SMask 100 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ Ã ùS á…PaÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0ðr
endstream
endobj
28 0 obj
151
endobj
39 0 obj
<< /Length 40 0 R /Type /XObject /Subtype /Image /Width 181 /Height 58 /Interpolate
true /ColorSpace 77 0 R /SMask 102 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOíoˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`à{
endstream
endobj
40 0 obj
161
endobj
25 0 obj
<< /Length 26 0 R /Type /XObject /Subtype /Image /Width 97 /Height 34 /Interpolate
true /ColorSpace 77 0 R /SMask 104 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOm
?ˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€^&¦
endstream
endobj
26 0 obj
67
endobj
31 0 obj
<< /Length 32 0 R /Type /XObject /Subtype /Image /Width 132 /Height 58 /Interpolate
true /ColorSpace 77 0 R /SMask 106 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ
 ÷Oíì( 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€>0Y¸
endstream
endobj
32 0 obj
123
endobj
9 0 obj
<< /Length 10 0 R /Type /XObject /Subtype /Image /Width 97 /Height 34 /Interpolate
true /ColorSpace 77 0 R /SMask 108 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOm
?ˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€^&¦
endstream
endobj
10 0 obj
67
endobj
37 0 obj
<< /Length 38 0 R /Type /XObject /Subtype /Image /Width 181 /Height 34 /Interpolate
true /ColorSpace 77 0 R /SMask 110 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOm
ˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ |
H
endstream
endobj
38 0 obj
104
endobj
7 0 obj
<< /Length 8 0 R /Type /XObject /Subtype /Image /Width 97 /Height 58 /Interpolate
true /ColorSpace 77 0 R /SMask 112 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOm /ˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0ðAî
endstream
endobj
8 0 obj
97
endobj
55 0 obj
<< /Length 56 0 R /Type /XObject /Subtype /Image /Width 212 /Height 46 /Interpolate
true /ColorSpace 77 0 R /SMask 114 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOm /ˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0ðrH
endstream
endobj
56 0 obj
151
endobj
11 0 obj
<< /Length 12 0 R /Type /XObject /Subtype /Image /Width 97 /Height 46 /Interpolate
true /ColorSpace 77 0 R /SMask 116 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ
 ÷Om( 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ ø 4J
endstream
endobj
12 0 obj
81
endobj
61 0 obj
<< /Length 62 0 R /Type /XObject /Subtype /Image /Width 144 /Height 34 /Interpolate
true /ColorSpace 77 0 R /SMask 118 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ Ã ùS ä…PaÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ ø9`
endstream
endobj
62 0 obj
86
endobj
53 0 obj
<< /Length 54 0 R /Type /XObject /Subtype /Image /Width 212 /Height 34 /Interpolate
true /ColorSpace 77 0 R /SMask 120 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ
 ÷Om( 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ xTx
endstream
endobj
54 0 obj
117
endobj
63 0 obj
<< /Length 64 0 R /Type /XObject /Subtype /Image /Width 132 /Height 46 /Interpolate
true /ColorSpace 77 0 R /SMask 122 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOm
ˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€~G(
endstream
endobj
64 0 obj
103
endobj
69 0 obj
<< /Length 70 0 R /Type /XObject /Subtype /Image /Width 112 /Height 46 /Interpolate
true /ColorSpace 77 0 R /SMask 124 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ Ã ùS ä…PaÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`ÀÀËÀ <`
endstream
endobj
70 0 obj
90
endobj
21 0 obj
<< /Length 22 0 R /Type /XObject /Subtype /Image /Width 97 /Height 34 /Interpolate
true /ColorSpace 77 0 R /SMask 126 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOm
?ˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€^&¦
endstream
endobj
22 0 obj
67
endobj
67 0 obj
<< /Length 68 0 R /Type /XObject /Subtype /Image /Width 229 /Height 94 /Interpolate
true /ColorSpace 77 0 R /SMask 128 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOm Oˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`à90üB
endstream
endobj
68 0 obj
305
endobj
33 0 obj
<< /Length 34 0 R /Type /XObject /Subtype /Image /Width 132 /Height 34 /Interpolate
true /ColorSpace 77 0 R /SMask 130 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOmˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€o`4˜
endstream
endobj
34 0 obj
82
endobj
65 0 obj
<< /Length 66 0 R /Type /XObject /Subtype /Image /Width 132 /Height 34 /Interpolate
true /ColorSpace 77 0 R /SMask 132 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOmˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€o`4˜
endstream
endobj
66 0 obj
82
endobj
19 0 obj
<< /Length 20 0 R /Type /XObject /Subtype /Image /Width 97 /Height 58 /Interpolate
true /ColorSpace 77 0 R /SMask 134 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOm /ˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0ðAî
endstream
endobj
20 0 obj
97
endobj
23 0 obj
<< /Length 24 0 R /Type /XObject /Subtype /Image /Width 97 /Height 58 /Interpolate
true /ColorSpace 77 0 R /SMask 136 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOm /ˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0ðAî
endstream
endobj
24 0 obj
97
endobj
43 0 obj
<< /Length 44 0 R /Type /XObject /Subtype /Image /Width 139 /Height 82 /Interpolate
true /ColorSpace 77 0 R /SMask 138 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOm
ˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€—…’
endstream
endobj
44 0 obj
173
endobj
41 0 obj
<< /Length 42 0 R /Type /XObject /Subtype /Image /Width 181 /Height 34 /Interpolate
true /ColorSpace 77 0 R /SMask 140 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ1  õOm
ˆ@aÀ€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ |
H
endstream
endobj
42 0 obj
104
endobj
15 0 obj
<< /Length 16 0 R /Type /XObject /Subtype /Image /Width 97 /Height 46 /Interpolate
true /ColorSpace 77 0 R /SMask 142 0 R /BitsPerComponent 8 /Filter /FlateDecode
>>
stream
xíÐ
 ÷Om( 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ 0`À€ ø 4J
endstream
endobj
16 0 obj
81
endobj
94 0 obj
<< /Length 95 0 R /Type /XObject /Subtype /Image /Width 112 /Height 34 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`Ã"™˜˜™Y¨˜™™˜˜Ñƒh +;'7U';+ 3šŒ@Û8¸yù…„E¨„…ùy¹9ØX™˜¼´Ž“WPD\JFVN^j@^^VFJBTˆ‹ƒÙ‡L,ì\|Â’²JjZ:ºzTº:ÚšjÊòR"üÜ@ dbåä‘RÒÔ76·²±µ£ °µ²01ÐV‘åçfc†'F^a)e]s[O߀ `ª @o7K5>N„™X¹%”tÜüÃã’Ó3³¨2ÓS"ƒqE}[ÿøœ²ú¶î¾~ꞎÆÊüägCU)AN$û¤T#2Êšz&Ïœ3j`}U9±žæš2B\,0ÿ1s
Êh˜{ÆÔ÷L›·dùJªKÌèo.Mö·Ö‘áfE²OVÓÊ'©´eÒÜ¥kÖo X»|ÁÔΪŒ [=dû¸„dµ¬|“ËÛ§Ì_¾nÓfêõ«Íè®É ±ÓW @ÿÁ⯮›.ñÇÄ”>gÌ™‹ S/~Ù93±¦Oxþ˦zþkÇšÿ`åK Êäò3- €0E`ƒÆ^~Âê3Hý„ kü
dý¼Ü ,ÐëXý§GåúÏ\ÿi¡× ðú]T¿ã𪠦, ã`Ð8êwšµ_äÀíA>.v”ö ¸}ÆÅCýö™´}Æ‚Ò>c ZkR·Š£ý ¬)èÛ¾†UM£4…! þK\y
endstream
endobj
95 0 obj
628
endobj
118 0 obj
<< /Length 119 0 R /Type /XObject /Subtype /Image /Width 144 /Height 34 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`£!@…`ddbbff¡;`ffbbdD÷ Ð1,¬ì œ\Üt\œ ì¬,ÌL¨.bº†ƒ›—O@PHX„Ž@XHPŸ—›ƒ…‰ )ˆ€Îaãä—’‘•“W —“•‘äãbgE!&v.>aIY%5
- ]=º] mM5ey)~n ƒÄÄÊÉ'"¥¤©olneckG7`kken¢¯¥,#ÂÏÅÆ OBŒ, ¼ÂRʺæ¶.ž¾AÁtA~^nöúj2"| ˆ bbå”PÒµróKNÏÌ¢ÈLO‰ ô°5P‘âfƒGˆ¬¦™[H|FAYu AuEQVb˜§•Ž‚ 3,1qð‰+êÛúÇç”Õ·u÷õÓ
ôõ´7Vä%;ªH
»G@JÕØ9"£¬©gòÌ9óèæÌœÚ×R™ía¦!-ÈÉ fNA
sϸ‚úžió–,_I7°|éü}MÅI¾VÚ²ÂܬHî‘Õ´òI*m™4wéšõèÖ¯]>jGeZ ®¼’{¸„dµ¬|“ËÛ§Ì_¾nÓfºMëW.œÞUd«§€ì NÁ Ÿ
Œð¥Ÿºn:§Ÿ%XÓRþš1g.Ý 0õbÉ_ðò'{”?°ò9n ÊgmÔò¹þJˤ#HOÆVÁêw3Hý D?àçå
¬ßUQëwXûGop´àíCUPûŽ Gûp°µŸÀý .žè_ðaö/€‚õ¿èÛÃÑÿÖôƒ«
kzŒÒƒ< Ã
¡
endstream
endobj
119 0 obj
602
endobj
86 0 obj
<< /Length 87 0 R /Type /XObject /Subtype /Image /Width 161 /Height 46 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`£!0HB€‘‘‰‰™™eà33#z¨ ]ÇÂÊÎÁÁÉÅ=°€‹‹“ƒƒèH72ÇÁÍË' ($,2 @XHŸ‡“ èD$ÝÇÆÉ+(".%#+'¯0p@^^NVZRL˜Ÿ›èBD43±°sñ KÊ*©ihéèê
ÐÕÕÑRWQ亄L¬œ|"RJšúÆæV6¶vlm,Í uÔäÁ.„!# ¯°”²®¹‹§o@PðÀ 'kMqAn6¸™X¹%”tÜüÃã’Ó3³df¦%Æ„ú8™jʉòq°À☉GDVÓÌ-$>£ ¬ºn Amei^j´¿ƒ¡Š” +Ü |âŠú¶þñ9eõmÝ}ýz»ZjŠÒ£<Í5eE¸‘ ( ¥jì ‘QÖÔ3yæœyæΞ>±³®09ÀVOA”ž™9e4Ì=ã
ê{¦Í[²|åÀËÍžÔ^•æd¨,·ä@!Y-+Ÿä²¶Éó–¯Ý°iàÀÆõ«—Ìîo(ˆv5Q•àc‡ecf.a9 ÿ´ê®KÖnÞ¾sàÀŽmW-˜ÒZçaª&Éì@y Û ÌÚÞÙË7lß½g ÁÎk—Lo/Kð4W—B8…[DA×.(«®îÊM;÷ì 8°w÷¶õKgtV$z™kH pÀ¢xÔDGÉh T8Ž† Ž€!Zx4‰*
q„ °ªÜ5É`«‹[0êbNXkfÒàhÍ䣷f`íÁºîAÑ ¬Do2q µ¨gÌ™;€ {‹š Ö'É ¬}X¯.nÀ{u5Ø{uÈýâ´ÌXûÅ°‘3ÈÈBÐ@ðÈ‚1ÚÈllFoàÇf¬±Í0ÀG·TA£[ tt4±n
úñAð+Ï ae º6F=ÀƒÔ8ƨƒƒ|” 1 <Ên! 5€
endstream
endobj
87 0 obj
721
endobj
134 0 obj
<< /Length 135 0 R /Type /XObject /Subtype /Image /Width 97 /Height 58 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`ƒ&™˜˜™Y(ÌÌLLLŒèþšÎÂÊÎÁÁÉÅMàââäà`cZ‚b#Ðxn^>A!aŠ€° ? ';Ð
$€æ³qò
ŠˆKÉÈÊÉ+äååd¥%Å„ù¹9€6 ‚‰‰…‹OXRVIMCKGW| ««£¥®¢ #.È´á&VN>)%M}cs+[;
€¥™¡Žš<ظY8x…¥”uÍm]<}‚‚ÉAAþ> NÖ&š
â‚Ülp ˜X¹%”tÜüÃã’Ó3³È™™i‰1¡>N¦šr¢| ,°0bbã‘Õ4s ‰Ï((«®£ÔV–æ¥Fû;ªH r±Â-ààWÔ·õÏ)«oëîë§ ôvµÔ¥GyškÊŠp#Y ¥jì ‘QÖÔ3yæœy䃹³§Oì¬+J°ÕSå…G3§ Œ†¹g\A}Ï´yK–¯$ ¬X¶hö¤öª¬0'Ceq>$ „dµ¬|’ËÚ&Ï[¾vÃ&òÁÆõ«—Ìîo,ˆv5Q•àc‡%#f.a9 ÿ´ê®KÖnÞ¾“|°cÛÆU ¦´–Äy˜ªIò#[ ¯c”YÛ;{ù†í»÷P vn]»dzGY‚§¹ºÂn]» ¬ºþ¹+7íܳŸ|°w÷¶õKgtU$z™kH pÀ‚hÔDŽ",p°FƒGÀ „Gƒ8X£A„#`£A„ ¬aDÀf m[´oqÂZv“hÔ²ƒµMëºiÓ6eâ@j]Ϙ3—€½uÍë dÓª ëáÄQÜéÁÞÃAeR2°öÑ`½L3H/3ˆ îe£õ2`ýd=ÊûÉÖØúÉ ðž¾*¨§O ÐÑÑÄÖÓ§ùXx´…‹‡f£- @`ãEá/¼ÐxÄ 1´3ÊB lçg
endstream
endobj
135 0 obj
707
endobj
138 0 obj
<< /Length 139 0 R /Type /XObject /Subtype /Image /Width 139 /Height 82 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xíšïKq Ç·û±ÝîÜéíÎ_Çææü?6§N†gÚq‘š§¡B8j¡ÎÄ$b#E £ÔIŠa©Ë–Z¦JFÿZgrsÎï`>ùn¾ï'ƒßo^{sOÞo ¸"Ãpœ€) Ç0LïSñAzŠ2Ð ,ÑŠÒ“ gF«¡#›Å™xŽxÇeJG`X ʼnÎ`ä„\Ñl)°Ú`Èjµ˜Å¼lŽ¥õd,ŒÐÓ,Ÿo±—–U8œU0ätT–—YE!“Q¼œcÁH+ˆörWÛÓ 5B‘äq_sU›…LZ‡G³«%(#/9ÝÒ-oÛ=¹ †äÎö;-MõÕ¥f¥Î±`$ÍåÙž–Žž~ÿ``†ƒ}}²Wª.MŒ.úaº ÁR^×Òí †&à(4þløa×ã°å°®†£ØÜB—Ôá NÎ̆ hîÍÔøè£îæšâü¬X+YbIíÍÞ¡àôÜÒǵ Z¿~1ò µ®ÌÌÑ„J7pæ2··lrîCdsk†¶¿|^ O?÷·{*- ýÜÝÞX~’%§Mˆ±B󎆎л•Í݃Ãc:úõãëjxrä~“Ë–}ÁŠÕ!É—ó«[{‡¿O èhÿ[äýÔhOsuaŒ‚lÎFyxba}gÿøä/ ý9>ø¾±øêiï{N©~n‘DåRüPV.!Qˆ
¢" º¡¬ * Ê
¢" º¡¬ * Ê
¢" º¡¬ * Ê
¢" º¡¬ * Ê
¢" º¡¬\
NóéÒ|(VÒ¦2¨-ÙbÊ[2µ;œ˜…Þ ¶]ì1*¦Q]Y[‡¡µËóÑFÕmT£=óè=sW|Ϭ¶ïý©oßc7 ¤tº[Hêa¢Gƒ~__gkü&A]jÔ-5d(R–·¯×»J..54ê~¥
Þ~E:Û¯ÅíW4ÑUOÉéª').’z˜èQ‚UO*¶NÊÖ)÷òÖIóFg¤ÁL£xQwqІq vqÊf#EkA:Pg#è7m ü]˼B
endstream
endobj
139 0 obj
823
endobj
96 0 obj
<< /Length 97 0 R /Type /XObject /Subtype /Image /Width 139 /Height 34 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`£!@b022113³Ð033111¢»èVvN.nz.NvVf4Ç0 ÂÁÍË' ($,B ,$(ÈÏËÍÁÆÂÄ„0@—°qò
ŠˆKÉÈÊÉ+ÐÈËËÊHIˆ
òq±³"‡ ;Ÿ°¤¬’š†–Ž® =€®Ž¶¦š²¼”?7Ð-ˆ`abåä‘RÒÔ76·²±µ£ °µ27Ñ×R‘áçbc†§]F^a)e]s[O߀ `z€ @?/7 5>D°0±r J(éZ¹ù‡Ç%§gfÑd¦§ÄGyÚ¨H q³Ácˆ‰GDVÓÌ-$>£ ¬ºŽ> º¢(+1ÜÓJGAŒƒ–X˜8øÄõmýãsÊêÛºûúézÚ+ò’B
U$" ¥jì ‘QÖÔ3yæœyô sgMík©Ì‰ñ0Óäb…
3§ Œ†¹g\A}Ï´yK–¯¤X±tþŒ¾¦’d?+mYanV$§ÈjZù$•¶Lš»tÍú
tk—ÏŸÚQ™ h«+/‚ä.!Y-+ßäòö)ó—¯Û´™.`ýÊ…Ó»ª3ƒìôÂ)8hB–Vêº:0q å sæR Ì›‡n朙S{á9ˆžƒàåJ6ÝË•`ôrVÚÆ
|i‹\¥eRÀª4TsÓ“ã#=Ðë XÍl©™ƒ¨‚ƒ1ÌÖÌ®öúª¨53¬½¢G¿öŠ-¤½¢ŒÖ^a€·âTA8jX£Õ\ ¸hÛÊÛ¶â˜m[p‹Ÿ‹g´ø€nõƒèÖÂÑÖÑÔ;d„·°aí„Qz°† 7°^
endstream
endobj
97 0 obj
630
endobj
116 0 obj
<< /Length 117 0 R /Type /XObject /Subtype /Image /Width 97 /Height 46 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`ƒ&™˜˜™Y(ÌÌLLLŒèþšÎÂÊÎÁÁÉÅMàââäà`cZ‚b#Ðxn^>A!aŠ€° ? ';Ð
$€æ³qò
ŠˆKÉÈÊÉ+äååd¥%Å„ù¹9€6 ‚‰‰…‹OXRVIMCKGW| ««£¥®¢ #.È´á&VN>)%M}cs+[;
€¥™¡Žš<ظY8x…¥”uÍm]<}‚‚ÉAAþ> NÖ&š
â‚Ülp ˜X¹%”tÜüÃã’Ó3³È™™i‰1¡>N¦šr¢| ,°0bbã‘Õ4s ‰Ï((«®£ÔV–æ¥Fû;ªH r±Â-ààWÔ·õÏ)«oëîë§ ôvµÔ¥GyškÊŠp#Y ¥jì ‘QÖÔ3yæœy䃹³§Oì¬+J°ÕSå…G3§ Œ†¹g\A}Ï´yK–¯$ ¬X¶hö¤öª¬0'Ceq>$ „dµ¬|’ËÚ&Ï[¾vÃ&òÁÆõ«—Ìîo,ˆv5Q•àc‡%#f.a9 ÿ´ê®KÖnÞ¾“|°cÛÆU ¦´–Äy˜ªIò#[ ¯c”YÛ;{ù†í»÷P vn]»dzGY‚§¹ºÂn]» ¬ºþ¹+7íܳŸ|°w÷¶õKgtU$z™kH pÀ‚hÔDŽ",p°†m‹
ÚædÚ—Eœ°ÒtJSX}P×M›ú€‰©F›1g. {Æ«“³iU'ÃZq·*j°·*ÛEi™”€ ¬í"XËÎ Ò² ¢€[vÆh-;XÛTò¶©5¶¶)¼u
j]Stt4±µ®iÞ?` ÷p¸xhÖÃa Ú ë£QØIÃÑGvvhÜËDt§FYè! s
endstream
endobj
117 0 obj
677
endobj
130 0 obj
<< /Length 131 0 R /Type /XObject /Subtype /Image /Width 132 /Height 34 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`£!€%™˜˜™Y蘙™˜˜Ñ t +;'7Í';+3š+.ààæå¡5äçãædGuÐ lœ¼‚"âR2²rò
4òòr²RbÂüÜ @G ⃉…‹OXRVIMCKGW¦@WGGS]YAZL‡ƒ):˜X9ùD¤”4õÍllíh l-M
uÔäĹ9XàÁÈÂÁ+,¥¬knëâéLSäïãîhe¤)'.ÀÅ
w+— „’®•›x\rzfMAfFjbtˆƒ‰º¬/;3,A0±ñˆÈjš¹…Äg”U×ÑÔT–ä¦DùÙé+K
p²ÀÝÀÁ'®¨oë ŸSVßÖÝ×O[ÐÛÙ\]”ánª!+ÄÅ
+©˜8¤T#2Êšz&Ïœ3¦`îìiÚk ü¬uäE¸án`æ”Ñ0÷Œ+¨ï™6oÉò•4+–-œ=©"#ÄA_IŒÙ
²šV>I¥-“æ.]³~mÁÚ•‹fôÖåF8*‹ó²Áâ‚™KHVËÊ7¹¼}Êüåë6m¦-Ø°zɬ¾†üH47p
Ò= rÐÖ êº,= ä‹sæÒ`ÏL°ò!›¾åƒ rù +'ãèRNV”ä`)'‘ë‹´LƒŒÔ„èoôúVošAêÍ Ú‚@¬õ&¬ý Gçö;¢ýÀ oG©‚ÚQ48ÚQômOÊbmO2€ÛÕ\>
stream
xc`£!0HB€‘‘‰‰™™eà33#z¨ ]ÇÂÊÎÁÁÉÅ=°€‹‹“ƒƒèH72ÇÁÍË' ($,2 @XHŸ‡“ èD$ÝÇÆÉ+(".%#+'¯0p@^^NVZRL˜Ÿ›èBD43±°sñ KÊ*©ihéèê
ÐÕÕÑRWQ亄L¬œ|"RJšúÆæV6¶vlm,Í uÔäÁ.„!# ¯°”²®¹‹§o@PðÀ 'kMqAn6¸™X¹%”tÜüÃã’Ó3³df¦%Æ„ú8™jʉòq°À☉GDVÓÌ-$>£ ¬ºn Amei^j´¿ƒ¡Š” +Ü |âŠú¶þñ9eõmÝ}ýz»ZjŠÒ£<Í5eE¸‘ ( ¥jì ‘QÖÔ3yæœyæΞ>±³®09ÀVOA”ž™9e4Ì=ã
ê{¦Í[²|åÀËÍžÔ^•æd¨,·ì@YM+Ÿ¤Ò–Is—®Y¿a ÁºU‹göÕçG¹«Jð±Ã²13—¬–•oryû”ùË×mÚ<€`Ú¥³û £ÝLP È)8˜B°3ai°®{p¦A&¤\ ¸WÇÅ3h{u @ÂúÅÜ1ÆÑ/vðùÈ¢ :Ên! ór4G
endstream
endobj
91 0 obj
592
endobj
132 0 obj
<< /Length 133 0 R /Type /XObject /Subtype /Image /Width 132 /Height 34 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`£!€%™˜˜™Y蘙™˜˜Ñ t +;'7Í';+3š+.ààæå¡5äçãædGuÐ lœ¼‚"âR2²rò
4òòr²RbÂüÜ @G ⃉…‹OXRVIMCKGW¦@WGGS]YAZL‡ƒ):˜X9ùD¤”4õÍllíh l-M
uÔäĹ9XàÁÈÂÁ+,¥¬knëâéLSäïãîhe¤)'.ÀÅ
w+— „’®•›x\rzfMAfFjbtˆƒ‰º¬/;3,A0±ñˆÈjš¹…Äg”U×ÑÔT–ä¦DùÙé+K
p²ÀÝÀÁ'®¨oë ŸSVßÖÝ×O[ÐÛÙ\]”ánª!+ÄÅ
+©˜8¤T#2Êšz&Ïœ3¦`îìiÚk ü¬uäE¸án`æ”Ñ0÷Œ+¨ï™6oÉò•4+–-œ=©"#ÄA_IŒÙ
²šV>I¥-“æ.]³~mÁÚ•‹fôÖåF8*‹ó²Áâ‚™KHVËÊ7¹¼}Êüåë6m¦-Ø°zɬ¾†üH47p
Ò= rÐÖ êº,= ä‹sæÒ`ÏL°ò!›¾åƒ rù +'ãèRNV”ä`)'‘ë‹´L Z›`S–Â&,–‘š â^_ÀêM3H½D[ˆµÞd€µ ôèÜ~`G´ àí(UP;Š €¶²°©Ka“@ÃÑŽ¢o{Rk{’Ü®æâ¡K»Z{»šèXÿ‚ö .ìý `kfàûY°&Õ(=€! ñ- ÿ
endstream
endobj
133 0 obj
620
endobj
142 0 obj
<< /Length 143 0 R /Type /XObject /Subtype /Image /Width 97 /Height 46 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`ƒ&™˜˜™Y(ÌÌLLLŒèþšÎÂÊÎÁÁÉÅMàââäà`cZ‚b#Ðxn^>A!aŠ€° ? ';Ð
$€æ³qò
ŠˆKÉÈÊÉ+äååd¥%Å„ù¹9€6 ‚‰‰…‹OXRVIMCKGW| ««£¥®¢ #.È´á&VN>)%M}cs+[;
€¥™¡Žš<ظY8x…¥”uÍm]<}‚‚ÉAAþ> NÖ&š
â‚Ülp ˜X¹%”tÜüÃã’Ó3³È™™i‰1¡>N¦šr¢| ,°0bbã‘Õ4s ‰Ï((«®£ÔV–æ¥Fû;ªH r±Â-ààWÔ·õÏ)«oëîë§ ôvµÔ¥GyškÊŠp#Y ¥jì ‘QÖÔ3yæœy䃹³§Oì¬+J°ÕSå…G3§ Œ†¹g\A}Ï´yK–¯$ ¬X¶hö¤öª¬0'Ceq>$ „dµ¬|’ËÚ&Ï[¾vÃ&òÁÆõ«—Ìîo,ˆv5Q•àc‡%#f.a9 ÿ´ê®KÖnÞ¾“|°cÛÆU ¦´–Äy˜ªIò#[ ¯c”YÛ;{ù†í»÷P vn]»dzGY‚§¹ºÂn]» ¬ºþ¹+7íܳŸ|°w÷¶õKgtU$z™kH pÀ‚hÔDŽ",p°†m‹
ÚædÚ—Eœ°ÒtJSX}P×M›ú€‰¥F›KÀ^£1ÁêälZÕÉ°VE ÅŠì
ävQZ&% k»Ö²3ƒ´ì‚(à–1ZËŽÖ6Õ£¼mjmÊ o]«‚Z×” Mlkš÷À= . šõp€6ÀúhvÒpôÑ€ ÷2Ý©Qz ’Is
endstream
endobj
143 0 obj
675
endobj
110 0 obj
<< /Length 111 0 R /Type /XObject /Subtype /Image /Width 181 /Height 34 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`£!0LC€‘‘‰‰™™epff&&&Fôº˜…•ƒƒ“‹{ð..N6V4w3ÌÁÍË' ($,2耰 ;+3rhÝÌÆÉ+(".%#+'¯0¸€¼¼œ¬´¤¸ˆ ’«™Xعø„%e•Ô4´ttõÐÕÕÑÒPU”äådcF$l&VN>)%M}cs+[»Alm¬ÌŒtÕ$…x9X™`¹‘‘…ƒWXJY×ÜÖÅÓ7 (xp gmE AnvxP3±r J(éZ¹ù‡Ç%§gf
.™™–êël®¥ ÎÏÉK Ll<"²šfn!ñeÕuƒ
ÔV•æ§Å:«I qÃÓŸ¸¢¾|NY}[w_ÿ ½]-µ%™ÑÞVÚò">
stream
xc`ƒ&™˜˜™Y(ÌÌLLLŒèþšÎÂÊÎÁÁÉÅMàââäà`cZ‚b#Ðxn^>A!aŠ€° ? ';Ð
$€æ³qò
ŠˆKÉÈÊÉ+äååd¥%Å„ù¹9€6 ‚‰‰…‹OXRVIMCKGW| ««£¥®¢ #.È´á&VN>)%M}cs+[;
€¥™¡Žš<ظY8x…¥”uÍm]<}‚‚ÉAAþ> NÖ&š
â‚Ülp ˜X¹%”tÜüÃã’Ó3³È™™i‰1¡>N¦šr¢| ,°0bbã‘Õ4s ‰Ï((«®£ÔV–æ¥Fû;ªH r±Â-ààWÔ·õÏ)«oëîë§ ôvµÔ¥GyškÊŠp#Y ¥jì ‘QÖÔ3yæœy䃹³§Oì¬+J°ÕSå…G3§ Œ†¹g\A}Ï´yK–¯$ ¬X¶hö¤öª¬0'Ceq>d d5|’J[&Í]ºfý
ÀºU‹gö5äG¹«Jð±Ã’3—¬–•oryû”ùË×mÚLØ°féìþÆÂh7 8©éƒ^L Àâ ®›6qÀÄ”ŠfÌ™KÀžŠ˜`ù ›Vù –“ã(ÎÉ5Øs2rY”–I ÈÀZÁJS3HiD —¦Æh¥)¬>У¼>°ÆV 0Àk4UPF ÐÑÑÄV£Ñ¼Nf ·*¸xhÖª` Ú kQØ0ÂÑ.60hܲC4aFYè! æÅÐ^
endstream
endobj
127 0 obj
577
endobj
112 0 obj
<< /Length 113 0 R /Type /XObject /Subtype /Image /Width 97 /Height 58 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`ƒ&™˜˜™Y(ÌÌLLLŒèþšÎÂÊÎÁÁÉÅMàââäà`cZ‚b#Ðxn^>A!aŠ€° ? ';Ð
$€æ³qò
ŠˆKÉÈÊÉ+äååd¥%Å„ù¹9€6 ‚‰‰…‹OXRVIMCKGW| ««£¥®¢ #.È´á&VN>)%M}cs+[;
€¥™¡Žš<ظY8x…¥”uÍm]<}‚‚ÉAAþ> NÖ&š
â‚Ülp ˜X¹%”tÜüÃã’Ó3³È™™i‰1¡>N¦šr¢| ,°0bbã‘Õ4s ‰Ï((«®£ÔV–æ¥Fû;ªH r±Â-ààWÔ·õÏ)«oëîë§ ôvµÔ¥GyškÊŠp#Y ¥jì ‘QÖÔ3yæœy䃹³§Oì¬+J°ÕSå…G3§ Œ†¹g\A}Ï´yK–¯$ ¬X¶hö¤öª¬0'Ceq>$ „dµ¬|’ËÚ&Ï[¾vÃ&òÁÆõ«—Ìîo,ˆv5Q•àc‡%#f.a9 ÿ´ê®KÖnÞ¾“|°cÛÆU ¦´–Äy˜ªIò#[ ¯c”YÛ;{ù†í»÷P vn]»dzGY‚§¹ºÂn]» ¬ºþ¹+7íܳŸ|°w÷¶õKgtU$z™kH pÀ‚hÔDŽ",p°FƒGÀ „Gƒ8X£A„#`£A„ ¬aDÀf m[´oqÂZv“hÔ²ƒµMëºiÓ6eâ@j]Ϙ3—€½uÍë dÓª ëáÄQÜéÁÞÃAeR2°öÑ`½L3H/3ˆ îe£õ2`ýd=ÊûÉÖØúÉ ðž¾*¨§O ÐÑÑÄÖÓ§ùXx´…‹‡f£- @`ãEá/¼ÐxÄ 1´3ÊB lçg
endstream
endobj
113 0 obj
707
endobj
88 0 obj
<< /Length 89 0 R /Type /XObject /Subtype /Image /Width 212 /Height 34 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`£!0TFF&&ff–! ˜™™˜˜Ñƒè!VvN.î!¸¸89ØÙX™Ñ|Åô7/Ÿ€ °ÈPÂB‚ü|Üœì@_!EÐKlœ¼‚"âR2²rò
C
ÈËËÉJIˆ óqs xŠ‰…‹OXRVIMCKGWoH] Muei1 §’ +'Ÿˆ”’¦¾±¹•Ýж֖¦†:jrâ‚Üì,ðÔÇÈÂÁ+,¥¬knëâé<¤@P¿»£•‘†œ?+ÜOL¬\‚JºVnþáqÉé™YC
df¤&D‡x;«ËŠð²3ÃJ &6 YM3·øŒ‚²êº!j*KrR¢|mõ•%8Yà~âàWÔ·õÏ)«oëîë Z ·³¹º(-ÂÍT]Fˆ‹Vó2qH©;Gd”5õLž9gÞsgO›Ð^›Ÿàk¥-/Â
÷3§ Œ†¹g\A}Ï´yK–¯ R`Ų…³'µUdÛë+Šñ ûIVÓÊ'©´eÒÜ¥kÖoZ`íÊE3zër ”ÅyÙ`i™KHVËÊ7¹¼}Êüåë6m Z`Ãê%³úêó#œ
QüÄ)8¤ãiጠÌx‚姺Ÿ&bæ'”roÆœ¹€/ñnÀ^î1Áê§ìaT?ÁÚqC² Qµ ÜÞKË X€hléX{O
¥½k—›AÚåA€ âÝèïã†Ù.g€õŸô†Oÿ‰ÞÏUõs :ÙDºG?whGÈb ` qñ Éq#aè¸h4 Ö{Óˆñ½¡7À‡c|è¯á7‹i£œÑ G ÅÓ¢
endstream
endobj
89 0 obj
635
endobj
104 0 obj
<< /Length 105 0 R /Type /XObject /Subtype /Image /Width 97 /Height 34 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`ƒ&™˜˜™Y(ÌÌLLLŒèþšÎÂÊÎÁÁÉÅMàââäà`cZ‚b#Ðxn^>A!aŠ€° ? ';Ð
$€æ³qò
ŠˆKÉÈÊÉ+äååd¥%Å„ù¹9€6 ‚‰‰…‹OXRVIMCKGW| ««£¥®¢ #.È´á&VN>)%M}cs+[;
€¥™¡Žš<ظY8x…¥”uÍm]<}‚‚ÉAAþ> NÖ&š
â‚Ülp ˜X¹%”tÜüÃã’Ó3³È™™i‰1¡>N¦šr¢| ,°0bbã‘Õ4s ‰Ï((«®£ÔV–æ¥Fû;ªH r±Â-ààWÔ·õÏ)«oëîë§ ôvµÔ¥GyškÊŠp#Y ¥jì ‘QÖÔ3yæœy䃹³§Oì¬+J°ÕSå…G3§ Œ†¹g\A}Ï´yK–¯$ ¬X¶hö¤öª¬0'Ceq>d d5|’J[&Í]ºfý
ÀºU‹gö5äG¹«Jð±Ã’3—¬–•oryû”ùË×mÚLØ°féìþÆÂh7 8©éƒ^L Àâ ®›6qÀÄ”ŠfÌ™KÌ›‡K öTÄËÙ´Ê°œ GqN®Áž“‘Ë¢´Lü QPaS—µ,‚•¦fÒ4ˆ Æ©\š£•¦ °ú@òúÀ[}À ¯ÑTA5~€¨î°©ÓÑÑÄV£Ñ¼Nf ·*¸xhÖª` Ú kQØ0ÂÑ.60hܲC4aFYè! ;þÐv
endstream
endobj
105 0 obj
595
endobj
120 0 obj
<< /Length 121 0 R /Type /XObject /Subtype /Image /Width 212 /Height 34 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`£!0TFF&&ff–! ˜™™˜˜Ñƒè!VvN.î!¸¸89ØÙX™Ñ|Åô7/Ÿ€ °ÈPÂB‚ü|Üœì@_!EÐKlœ¼‚"âR2²rò
C
ÈËËÉJIˆ óqs xŠ‰…‹OXRVIMCKGWoH] Muei1 §’ +'Ÿˆ”’¦¾±¹•Ýж֖¦†:jrâ‚Üì,ðÔÇÈÂÁ+,¥¬knëâé<¤@P¿»£•‘†œ?+ÜOL¬\‚JºVnþáqÉé™YC
df¤&D‡x;«ËŠð²3ÃJ &6 YM3·øŒ‚²êº!j*KrR¢|mõ•%8Yà~âàWÔ·õÏ)«oëîë Z ·³¹º(-ÂÍT]Fˆ‹Vó2qH©;Gd”5õLž9gÞsgO›Ð^›Ÿàk¥-/Â
÷3§ Œ†¹g\A}Ï´yK–¯ R`Ų…³'µUdÛë+Šñ ûIVÓÊ'©´eÒÜ¥kÖoZ`íÊE3zër ”ÅyÙ`i™KHVËÊ7¹¼}Êüåë6m Z`Ãê%³úêó#œ
QüÄ)8¤ãiጠÌx‚姺Ÿ&bæ'”roÆœ¹C `/÷˜`õSö0ªŸ`툸!ÙŽ¨ÀÚŽ@nï¥e1 kï©¡´÷`ír3H»>
stream
xc`Ã"™˜˜™Y¨˜™™˜˜Ñƒh +;'7U';+ 3šŒ@Û8¸yù…„E¨„…ùy¹9ØX™˜¼´Ž“WPD\JFVN^j@^^VFJBTˆ‹ƒÙ‡L,ì\|Â’²JjZ:ºzTº:ÚšjÊòR"üÜ@ dbåä‘RÒÔ76·²±µ£ °µ²01ÐV‘åçfc†'F^a)e]s[O߀ `ª @o7K5>N„™X¹%”tÜüÃã’Ó3³¨2ÓS"ƒqE}[ÿøœ²ú¶î¾~ꞎÆÊüägCU)AN$û¤T#2Êšz&Ïœ3j`}U9±žæš2B\,0ÿ1s
Êh˜{ÆÔ÷L›·dùJªKÌèo.Mö·Ö‘áfEØ'$«eå“\Ö6yÞòµ6Q
l\»rá´®êÌ`;=dû¸„åtlüÓª»f,Y»yûNª [Ö/ŸÓßæ` (ƃ𠗰¼ŽmPfmïìå¶ïÞC=°cóªù“šò#œ •ìcáQе ʪ럻rÓÎ=û©öîܲfáä–‚HgCeq^VX3j ™!<ž£é“”¤ƒ#½0Ó¹|ÚGßò“V?L¢Oý «ÿêºéRÿ1q Õï3æÌ¥˜3kýo¿dS½ýÒŽµýkŸÅÑ©}†ÜþLËDYY¨|’xØÛŸ°öµ¤} D=èçåæ`Þ¾f€õ ô¨Ü°÷ ´Ðû ðþ‘*¨„
ôôPù$ñpôhÖÿ“÷ÿù¸ØQú àþ-õû·BÐþ- Jÿ–h!¬ÿNÝ<Žþ;°¥Mßñ XÓ~”¦0 h†‚#
endstream
endobj
125 0 obj
715
endobj
114 0 obj
<< /Length 115 0 R /Type /XObject /Subtype /Image /Width 212 /Height 46 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`£!0TFF&&ff–! ˜™™˜˜Ñƒè!VvN.î!¸¸89ØÙX™Ñ|Åô7/Ÿ€ °ÈPÂB‚ü|Üœì@_!EÐKlœ¼‚"âR2²rò
C
ÈËËÉJIˆ óqs xŠ‰…‹OXRVIMCKGWoH] Muei1 §’ +'Ÿˆ”’¦¾±¹•Ýж֖¦†:jrâ‚Üì,ðÔÇÈÂÁ+,¥¬knëâé<¤@P¿»£•‘†œ?+ÜOL¬\‚JºVnþáqÉé™YC
df¤&D‡x;«ËŠð²3ÃJ &6 YM3·øŒ‚²êº!j*KrR¢|mõ•%8Yà~âàWÔ·õÏ)«oëîë Z ·³¹º(-ÂÍT]Fˆ‹Vó2qH©;Gd”5õLž9gÞsgO›Ð^›Ÿàk¥-/Â
÷3§ Œ†¹g\A}Ï´yK–¯ R`Ų…³'µUdÛë+Šñ ùIHVËÊ'¹¬mò¼åk7lR`ãúU‹göÖåE8*‹ó²ÁÒ 3—°œŽZu׌%k7oß9¤ÀŽmVΛÔ\íj¤"·ì'y Û ÌÚÞÙË7lß½gh[Ö.šÚVëf¢*ð ·ˆ‚®]PV]ÿÜ•›vîÙ?¤ÀÞÝÛÖ-™Þ^çn¢&ÉÇ«tGý4Èbq4žY„àpÎh<á˜A&<Oƒ,Bp8G<ÛFî 1,Û{œ°vù¤áÓ.‡õŸêº‡fÿi"fÿ ¥Ÿ;cÎ\l Ü÷Å&1àbØû¹L°ñˆìa4 7Š’ãFXÇÇ÷Ò21Ò€ ¦$^‘,¼²T‘„ï©¡ŒïÁÆaÍ ã°AØ xl›Ä€‹úû¸aŽÃ2ÀÆËõ†Ïx9|^C4¯ &:0%ñŠèá•¥Š$Žy¡=ÿ$‹uþ‰>
stream
xí™ÿOqÇûÆÝ'·(_ ät‹“káœN uÕªåpe‘˜[®/¬ÉÐÍ5[¨Ùt5J`s±ÈÊF¶I-(ÐÉoüð¹v¯_n» >{ï}Ïíó<ï‚$$þSd2FL†aÙqç+ŠQLN$¥ Š" ÇÐcºeÉ„BE«–†QÓJJŽ!nW4㤊au†N£Él ³Ùdìh×±j%£
ªaTNÑÚv£Ëárs½`Áqn—Ãn5ê‰#õ†1’f
6gŸÇç #ð{ÏpÝ–vŠÀ`áo”¡„Jk8Åù‚ƒ#ãøK`Áóá±áPàlUÏ(ä5«aŒbô6Î?¾™º›‹X,zkâÊxÈç²èÚHT¨W²F§wèòäô\<± ÉùÇ÷£Ï{º:4ŠZ}À³öÓ³ñÅå•ë€±–zš|»1êï1³J\(j˜PìžÐµéøÒêæ›L,²[éÔâÃ;ü¹>›Ž– ¢’étøF"s‹«¯sùÂX|(¼Ël>OÌ^ ôœÖ·uÑ£Ë?6_ÞÌv‹{`ñµø9¿õréAdØÛeP×ESZ“;Ž&Réüî·ÒX|ßßû¸ýêYüæ¨Ïa`E›ÝA>–\Û*K?Ë€ñcÿK>z25Öï쨋F¬…àgÖ³;{åß`ñ«\*¾»2{ÜïìdHäðJ”D·ü3IN·ÜÒ&JN71¦å¯%§[ni“›8PZñ݈Ñ"ì=H¡ËÛ ²Ëûtb—'ôÓ +âé§L.éL0Nž\j3â=1͈Â4 Ó4Þ˜{DcÀQÏ=èzî!$LÞ ‡ “åH Y^/ Y^ÿß,O$˃j©©½šš‡ÛÕ}˜šbµ(‚D™OWUc¥Õ& êµ°spéÒdçRËE¸Ýòué)9ÐèÀ ¸ˆ
endstream
endobj
99 0 obj
733
endobj
122 0 obj
<< /Length 123 0 R /Type /XObject /Subtype /Image /Width 132 /Height 46 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`£!€%™˜˜™Y蘙™˜˜Ñ t +;'7Í';+3š+.ààæå¡5äçãædGuÐ lœ¼‚"âR2²rò
4òòr²RbÂüÜ @G ⃉…‹OXRVIMCKGW¦@WGGS]YAZL‡ƒ):˜X9ùD¤”4õÍllíh l-M
uÔäĹ9XàÁÈÂÁ+,¥¬knëâéLSäïãîhe¤)'.ÀÅ
w+— „’®•›x\rzfMAfFjbtˆƒ‰º¬/;3,A0±ñˆÈjš¹…Äg”U×ÑÔT–ä¦DùÙé+K
p²ÀÝÀÁ'®¨oë ŸSVßÖÝ×O[ÐÛÙ\]”ánª!+ÄÅ
+©˜8¤T#2Êšz&Ïœ3¦`îìiÚk ü¬uäE¸án`æ”Ñ0÷Œ+¨ï™6oÉò•4+–-œ=©"#ÄA_IŒÉ
B²ZV>Éem“ç-_»aMÁÆõ«ÏìÏ‹p6TçeƒÅ3—°œŽZu׌%k7oßIS°cÛ†•ó'µÅ¸«Jð!»A^Ç6(³¶wöò
Ûwï¡-عeí¢©í%qî&jHn`áQе ʪ럻rÓÎ=ûi
öîÞ¶nÉôŽÒxS5I>vX!5êH)5£á0š/0Ë`Y=àå$Ýë‹yXê ÎAPo‚öF;j.-övÓ µ'eÛ“ômWW”ä`iWcé_dÒ d¤&D‡x£÷/`ý,3X?+ˆ– k?‹¹¿iKÇþ&;¢¿É€¥ßK3€£ßMßñY¬ã ô ‡Æ>à tÄ€GÛS?.ë‚Ò â øÚ
endstream
endobj
123 0 obj
672
endobj
84 0 obj
<< /Length 85 0 R /Type /XObject /Subtype /Image /Width 97 /Height 34 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`ƒ&™˜˜™Y(ÌÌLLLŒèþšÎÂÊÎÁÁÉÅMàââäà`cZ‚b#Ðxn^>A!aŠ€° ? ';Ð
$€æ³qò
ŠˆKÉÈÊÉ+äååd¥%Å„ù¹9€6 ‚‰‰…‹OXRVIMCKGW| ««£¥®¢ #.È´á&VN>)%M}cs+[;
€¥™¡Žš<ظY8x…¥”uÍm]<}‚‚ÉAAþ> NÖ&š
â‚Ülp ˜X¹%”tÜüÃã’Ó3³È™™i‰1¡>N¦šr¢| ,°0bbã‘Õ4s ‰Ï((«®£ÔV–æ¥Fû;ªH r±Â-ààWÔ·õÏ)«oëîë§ ôvµÔ¥GyškÊŠp#Y ¥jì ‘QÖÔ3yæœy䃹³§Oì¬+J°ÕSå…G3§ Œ†¹g\A}Ï´yK–¯$ ¬X¶hö¤öª¬0'Ceq>d d5|’J[&Í]ºfý
ÀºU‹gö5äG¹«Jð±Ã’3—¬–•oryû”ùË×mÚLØ°féìþÆÂh7 8©éƒ^L Àâ ®›6qÀÄ”ŠfÌ™KÀžŠ˜`ù ›Vù –“ã(ÎÉ5Øs2rY”–I ÈÀZÁJS3HiD —¦Æh¥)¬>У¼>°ÆV 0Àk4UPF ÐÑÑÄV£Ñ¼Nf ·*¸xhÖª` Ú kQØ0ÂÑ.60hܲC4aFYè! æÅÐ^
endstream
endobj
85 0 obj
577
endobj
128 0 obj
<< /Length 129 0 R /Type /XObject /Subtype /Image /Width 229 /Height 94 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xíœÝSWÆaaaùZ]XEQ>F…ÑA¥Q°¦:D;¦P'‰iÔ SVGkSjj‚¦c££!¦1Ml1˜ih©iMÕ´&LÒé¿Öƒ r±×{èû\Áœ›÷9ïïìÝó ¸¸^Þ€PH"‘¸<$!|÷ž‘C1)¥(™\¿är%•Èh‰O!²H)Tt%£Ö°ØK£f*h…LŠl¹D %2ÃjuõzƒÑ„·ŒFƒ¾®¶ZS¡ Ëcd ±TNkjõæÆf›ÝÑ‚· v»µ©ÁT_Í()²h•)£YÙêt¹»<Þ Ìåí>ÕÑfo4j‘Kqa•B1¥Òè,··ðl xoƒþ¡3 t»¬Fm¥BR0Ir¦Æìèòù/Œ†®E'ðV4¾zyxèt{³¡Š¦DùO!Q²zk§ïüXd&6 Ç]7o\Ÿúô²ÿýÖ ## &)Z{ÂéõMÆî¬Ý[Ç\‰Õ¥›³áKV½FQd²RwÒÕw1ûæîÆ[)¼õ$ùøþJ|æªßã0±J2ÿ(E2¦¾Ù=8:³p÷Q*ÙÁ[¿þòSòÁòèpo«E«*|yD2µÞÖ5ŠÝÙHev÷ðÖþ ¿=ûñÞÂô¥>Wƒ––6)×ì x~u3½ûòUo½>Üßyº±4{Å×ÞX[bÒh÷£·ÉÌÞ«7o1Wö¯Ýg–¿ è,6)V°&GOp"¾þdç ûö ¼õ÷›ÃéÍ•Øø »IWAåq“Ø6 o#hWÀpå×
À›„7É/"9§\WN@øu¸®ü"’sÀpå„_‡€+àÊ/"9§\WN@øu¸®ü"’sÀpå„_‡€+àÊ/"9§\WN@øu¸®ü"’sÀpå„_‡€+àÊ/"9§\WN@øu¸®ü"’sšÿ3®"¹æ(ü/çð 2‰bLkók(Æôçk¼SLÙìáÁó§—¾¸âë(Nøˆä¹@ÚÙÐWË·3/ö_⃽ßÓÉõÅé‘þÒ@ÚѱϷÞyŽ¹2镯Q´°8ZHP($ÚÞ1:·”ø>™ÚÆ[©Í« ³¡€×aªRò“Šûš= OÍÝ^IÜÿs¯}¿ t—Æ}%*Ö`uŸ Ÿ˜»µxsÅçcÓáO½m'uŒü8ÓL*˜Z‹Ó3 G'§ðÖäg‘Ðè…ú:ÆjšçÓé¨Lfëœïõú†ç†q×ù ÿÃ~o»ÍTÕ)P›ri±µvœòôôb/o·ÛÕÒlªQçÊ?
'¨àDÊ?Œ–&›½Å‰½ vk£Y¯eT2²P! Õ¸0U5uzTTss™L½NËV*)Éq¿ Zh®‡RÐŒše«pË¢Ö!Z%ÏÕñä?;GÐ
))“ö(Ô•ë"ÅïÔG -ó¨Œ, ‰Å¹‚¬’5>@¹ Â2P‰!ø7€×
ü jðy”
endstream
endobj
129 0 obj
1132
endobj
80 0 obj
<< /Length 81 0 R /Type /XObject /Subtype /Image /Width 139 /Height 34 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`£!@b022113³Ð033111¢»èVvN.nz.NvVf4Ç0 ÂÁÍË' ($,B ,$(ÈÏËÍÁÆÂÄ„0@—°qò
ŠˆKÉÈÊÉ+ÐÈËËÊHIˆ
òq±³"‡ ;Ÿ°¤¬’š†–Ž® =€®Ž¶¦š²¼”?7Ð-ˆ`abåä‘RÒÔ76·²±µ£ °µ27Ñ×R‘áçbc†§]F^a)e]s[O߀ `z€ @?/7 5>D°0±r J(éZ¹ù‡Ç%§gfÑd¦§ÄGyÚ¨H q³Ácˆ‰GDVÓÌ-$>£ ¬ºŽ> º¢(+1ÜÓJGAŒƒ–X˜8øÄõmýãsÊêÛºûúézÚ+ò’B
U$" ¥jì ‘QÖÔ3yæœyô sgMík©Ì‰ñ0Óäb…
3§ Œ†¹g\A}Ï´yK–¯¤X±tþŒ¾¦’d?+mYanV$§ÈjZù$•¶Lš»tÍú
tk—ÏŸÚQ™ h«+/‚ä.!Y-+ßäòö)ó—¯Û´™.`ýÊ…Ó»ª3ƒìôÂ)8hB–Vêº:0q å sæâÀœ…KŠ€8¦Æ93§öÂs'<ÁË•lº—+Áèå
¬´øÒ¹JËÄ
õVi|‚0¨jÒ“ã#=Ðë XÍl©™ƒp`KŠ€8ÀšÙÕÞB_µff€µWôè×^±…´W”ÑÚ+ ðVœ*¨‡ ZvX¥ñ ´¢ªÁÑŠˆ¶ °m+ŽÙ¶e ·ø¹xA‹ŸèX?ˆn ! ý ` =@½CFx ÖN¥k Áj^.
endstream
endobj
81 0 obj
651
endobj
102 0 obj
<< /Length 103 0 R /Type /XObject /Subtype /Image /Width 181 /Height 58 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xíšÿKa Ç·û²Ýݶs· lN÷Å•ºÍB‹
Ç&‘"ŠÊê**’I–3!éËE £M3”b¥¤Ñ²2–fýkmåí‹x° î‡çâyÿ2xxxxóÚ#²ÏëQ(` ÿ”€R‰ (ŠEDyœ|±1†« ‚¤4à…¢H‚PáرÞÊbeB££õŒÁÈ£ÑÓZJ£Õ´‹U¤ŽaM–f«Íî +v»ÍÚÔhbõZB…UµF05EÎ6—ÇËu‚Žóz\-V£#Uhåb#8I³§»Ë†Â=€%
úÏpíŽFƒŽÀá¯Q‰:£å÷
Ž\à/ž ô†Îv´˜ºŒÁ)Æìä‚ý‘«ÑØÝÄXI$â·F¯Œô<S‰ ÷QiY«Ûßyl|*93Zf§ ß^<ïkk2hÊ÷!hSKW826™œ_L¿X,Ë©§³7†‚ vV«.5Bè-¾ÞkãÉ…¥µ7Y°²¹žYMÍ?¼ÃŸëršhµP%™fW`0:5¿ô:›Ëoƒ•ùwkÏg&¯÷ùN›ˆJiƒÕ Ž%ײùÂ.XùZøœ[¹ð :ào³è+¥)£ÍŠÄgR™Üηý°ò}o÷ãÖ«gÉ›C—…©.m÷†ùÄìòz¾°ÿó°üØû’ˤžÄ†»ÝM•Ò˜†up=üÄÜÊæöîÁáo°òëp¿ðþmzúöHÐÝÌèÑ¿DXZò¯ ’– ©È´É—!iÉ‘Š I‹€‘|’– ©È´É—!iÉ‘Š I‹€‘|’– ©È"¤QÊ(¿_ãÅÒ2œ{„iÈ Ó§'LÂ,o.-ŸY^ÍÔ4³± XNžš–çÓ÷ä4ŸL@TN& Ú¹Äu¥äeêÚ(Á¦Šs¡+ÎE°[þv‹-GvËQc·‚GìÔ#vÿõˆæ¨(ÛÖ’±+%«[×F 6y=íGÆ/kD…B–n¼Ô'(¬^!”X ï= |ðAüÞ£¨dø²Fpûð¨&ð¬õ Á
endstream
endobj
103 0 obj
791
endobj
92 0 obj
<< /Length 93 0 R /Type /XObject /Subtype /Image /Width 97 /Height 34 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`ƒ&™˜˜™Y(ÌÌLLLŒèþšÎÂÊÎÁÁÉÅMàââäà`cZ‚b#Ðxn^>A!aŠ€° ? ';Ð
$€æ³qò
ŠˆKÉÈÊÉ+äååd¥%Å„ù¹9€6 ‚‰‰…‹OXRVIMCKGW| ««£¥®¢ #.È´á&VN>)%M}cs+[;
€¥™¡Žš<ظY8x…¥”uÍm]<}‚‚ÉAAþ> NÖ&š
â‚Ülp ˜X¹%”tÜüÃã’Ó3³È™™i‰1¡>N¦šr¢| ,°0bbã‘Õ4s ‰Ï((«®£ÔV–æ¥Fû;ªH r±Â-ààWÔ·õÏ)«oëîë§ ôvµÔ¥GyškÊŠp#Y ¥jì ‘QÖÔ3yæœy䃹³§Oì¬+J°ÕSå…G3§ Œ†¹g\A}Ï´yK–¯$ ¬X¶hö¤öª¬0'Ceq>d d5|’J[&Í]ºfý
ÀºU‹gö5äG¹«Jð±Ã’3—¬–•oryû”ùË×mÚLØ°féìþÆÂh7 8©éƒ^L Àâ ®›6qÀÄ”ŠfÌ™K ˜7‹:쩈 –²i•`99Žâœ\ƒ='#—Ei™D xi…®6kY+MÍ ¥iq 8›:pijŒVš2Àê=Êëklõ¼FSÕhD x‡®VGG[Fó:™Üªàâ¡Y«‚h¬]DaÃG»ØÀ qËÑ„e¡‡ 4ÑÐt
endstream
endobj
93 0 obj
595
endobj
108 0 obj
<< /Length 109 0 R /Type /XObject /Subtype /Image /Width 97 /Height 34 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`ƒ&™˜˜™Y(ÌÌLLLŒèþšÎÂÊÎÁÁÉÅMàââäà`cZ‚b#Ðxn^>A!aŠ€° ? ';Ð
$€æ³qò
ŠˆKÉÈÊÉ+äååd¥%Å„ù¹9€6 ‚‰‰…‹OXRVIMCKGW| ««£¥®¢ #.È´á&VN>)%M}cs+[;
€¥™¡Žš<ظY8x…¥”uÍm]<}‚‚ÉAAþ> NÖ&š
â‚Ülp ˜X¹%”tÜüÃã’Ó3³È™™i‰1¡>N¦šr¢| ,°0bbã‘Õ4s ‰Ï((«®£ÔV–æ¥Fû;ªH r±Â-ààWÔ·õÏ)«oëîë§ ôvµÔ¥GyškÊŠp#Y ¥jì ‘QÖÔ3yæœy䃹³§Oì¬+J°ÕSå…G3§ Œ†¹g\A}Ï´yK–¯$ ¬X¶hö¤öª¬0'Ceq>d d5|’J[&Í]ºfý
ÀºU‹gö5äG¹«Jð±Ã’3—¬–•oryû”ùË×mÚLØ°féìþÆÂh7 8©éƒ^L Àâ ®›6qÀÄ”ŠfÌ™KÀžŠ˜`ù ›Vù –“ã(ÎÉ5Øs2rY”–I ÈÀZÁJS3HiD —¦Æh¥)¬>У¼>°ÆV 0Àk4UPF ÐÑÑÄV£Ñ¼Nf ·*¸xhÖª` Ú kQØ0ÂÑ.60hܲC4aFYè! æÅÐ^
endstream
endobj
109 0 obj
577
endobj
140 0 obj
<< /Length 141 0 R /Type /XObject /Subtype /Image /Width 181 /Height 34 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`£!0LC€‘‘‰‰™™epff&&&Fôº˜…•ƒƒ“‹{ð..N6V4w3ÌÁÍË' ($,2耰 ;+3rhÝÌÆÉ+(".%#+'¯0¸€¼¼œ¬´¤¸ˆ ’«™Xعø„%e•Ô4´ttõÐÕÕÑÒPU”äådcF$l&VN>)%M}cs+[»Alm¬ÌŒtÕ$…x9X™`¹‘‘…ƒWXJY×ÜÖÅÓ7 (xp gmE AnvxP3±r J(éZ¹ù‡Ç%§gf
.™™–êël®¥ ÎÏÉK Ll<"²šfn!ñeÕuƒ
ÔV•æ§Å:«I qÃÓŸ¸¢¾|NY}[w_ÿ ½]-µ%™ÑÞVÚò">
stream
xc`£!0TFF&&ff–! ˜™™˜˜Ñƒè!VvN.î!¸¸89ØÙX™Ñ|Åô7/Ÿ€ °ÈPÂB‚ü|Üœì@_!EÐKlœ¼‚"âR2²rò
C
ÈËËÉJIˆ óqs xŠ‰…‹OXRVIMCKGWoH] Muei1 §’ +'Ÿˆ”’¦¾±¹•Ýж֖¦†:jrâ‚Üì,ðÔÇÈÂÁ+,¥¬knëâé<¤@P¿»£•‘†œ?+ÜOL¬\‚JºVnþáqÉé™YC
df¤&D‡x;«ËŠð²3ÃJ &6 YM3·øŒ‚²êº!j*KrR¢|mõ•%8Yà~âàWÔ·õÏ)«oëîë Z ·³¹º(-ÂÍT]Fˆ‹Vó2qH©;Gd”5õLž9gÞsgO›Ð^›Ÿàk¥-/Â
÷3§ Œ†¹g\A}Ï´yK–¯ R`Ų…³'µUdÛë+Šñ ùIHVËÊ'¹¬mò¼åk7lR`ãúU‹göÖåE8*‹ó²ÁÒ 3—°œŽZu׌%k7oß9¤ÀŽmVΛÔ\íj¤"·ì'y Û ÌÚÞÙË7lß½gh[Ö.šÚVëf¢*ð ·ˆ‚®]PV]ÿÜ•›vîÙ?¤ÀÞÝÛÖ-™Þ^çn¢&ÉÇ«tGý4Èbq4žY„àpÎh<á˜A&<Oƒ,Bp8G<ÛFî 1,Û{œ°vù¤áÓ.‡õŸêº‡fÿi"fÿ ¥Ÿ;cÎÜ¡°÷s™`ãÙÃh<6n7$Ç*°Ž!ï¥eRdQÓ0ìfÁÆ÷ÔPÆ÷`ã°fqØ ¡ý}Ü0Ça`ãåzÃg¼œ>¯¡
š× &У¦aØÍÂ1¯1´çŸd±Î?1€ç ¹x†ä<¡0tž4û -ÓˆùÜ¡7¡Ë…}>è¯á7ïŽi£œÑ G §wÀý
endstream
endobj
83 0 obj
744
endobj
78 0 obj
<< /Length 79 0 R /Type /XObject /Subtype /Image /Width 144 /Height 46 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`£!@…`ddbbff¡;`ffbbdD÷ Ð1,¬ì œ\Üt\œ ì¬,ÌL¨.bº†ƒ›—O@PHX„Ž@XHPŸ—›ƒ…‰ )ˆ€Îaãä—’‘•“W —“•‘äãbgE!&v.>aIY%5
- ]=º] mM5ey)~n ƒÄÄÊÉ'"¥¤©olneckG7`kken¢¯¥,#ÂÏÅÆ OBŒ, ¼ÂRʺæ¶.ž¾AÁtA~^nöúj2"| ˆ bbå”PÒµróKNÏÌ¢ÈLO‰ ô°5P‘âfƒGˆ¬¦™[H|FAYu AuEQVb˜§•Ž‚ 3,1qð‰+êÛúÇç”Õ·u÷õÓ
ôõ´7Vä%;ªH
»G@JÕØ9"£¬©gòÌ9óèæÌœÚ×R™ía¦!-ÈÉ fNA
sϸ‚úžió–,_I7°|éü}MÅI¾VÚ²Âܬ÷ÉjYù$—µMž·|í†MtÖ®X0µ³*=ÈVWAÉ=\Âr:6þiÕ]3–¬Ý¼}'ÝÀö-ë–Íî«ËuÐWEq¼ŽmPfmïìå¶ïÞC7°{ǦUó&6æ†;("¹‡…[DA×.(«®îÊM;÷ì§Ø³sóê“šò#œ •ÄxXaô¨{ 10>ø“âhøŒ†þÀ/‹#ý0s ªòèžÁUqÂê÷Iƒ£~‡µêºéÜþY‚µýÃÄÔ>œ1g.Ý °}Ø‹¥}o?g’ö3¬7Pý mÔþrÿ+-“Ž =[ÿ Ö?5ƒôOƒèü¼\ýSUÔþ)¬ÿ®78úï ðñ
UÐø ŽñÁ6þà ãâˆñ1>Ìñ1 ƒ`ã‡ô @Ä1~ì©®ñUX×y” ä! îÑ
endstream
endobj
79 0 obj
711
endobj
100 0 obj
<< /Length 101 0 R /Type /XObject /Subtype /Image /Width 139 /Height 70 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xíšÝKSq Æ·ó²7=;Ç·Ãææ|Á—Í)†“á1íE\¤æјB8j¡n‰IÄ0FŠF©“CS—–Z¦JFÿZ§äÌã<2½ùm¿çfðå{ñðÙ—sñ =ôy=[Ž‘@åcAcn¡Kèð…ǧ¦£s@4ófbtøQwsMq~–ÒJ_R{³g0<9³°¼¡µ‹Ñ×/† ´Ö•™
“© $c.s{ûFÆg>Ä66·Ahëó§¥èäó@»§ÒÂÒø©“¥Âs7žZˆmîìîÐõÅ·‘AQpÚ8…Š-p4tôGÞ-mìì ÐáÏï_V¢ãC÷›\¶ì3V¬A ¾œ]ÙÜ=øu D‡{_cï'†}ÍÕ…
+ÍÙœbhlnm{ïèøý>Úÿ¶>ÿêiÏ{N.n¡HåÜùÁ[9‡D@*Šµ¼HE€Ú Þ
¤¢F@moRQ# 6ƒ·©¨P›Á[TÔ¨Íà\
J±é’:IVÒ&‹#å„r>å ¥œÛŽMÏmÛÎ涡H³—V×@huyq6žf“ñ4;žñ?žñw%füróÑ—úæCÙõ“*”tã ogkb $·du'-™DRKvûz½«älK¦‘»Ã*pÝ¡pÒ %t‡šx£Zò¯QMªª¤—X¸ QMEÏ\ õ̹ç{fÍÿöÊHƒö]#y‘ß$ {”pÁ›©/KÑK
\¿È• üM[ßM¤p
endstream
endobj
101 0 obj
796
endobj
136 0 obj
<< /Length 137 0 R /Type /XObject /Subtype /Image /Width 97 /Height 58 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`ƒ&™˜˜™Y(ÌÌLLLŒèþšÎÂÊÎÁÁÉÅMàââäà`cZ‚b#Ðxn^>A!aŠ€° ? ';Ð
$€æ³qò
ŠˆKÉÈÊÉ+äååd¥%Å„ù¹9€6 ‚‰‰…‹OXRVIMCKGW| ««£¥®¢ #.È´á&VN>)%M}cs+[;
€¥™¡Žš<ظY8x…¥”uÍm]<}‚‚ÉAAþ> NÖ&š
â‚Ülp ˜X¹%”tÜüÃã’Ó3³È™™i‰1¡>N¦šr¢| ,°0bbã‘Õ4s ‰Ï((«®£ÔV–æ¥Fû;ªH r±Â-ààWÔ·õÏ)«oëîë§ ôvµÔ¥GyškÊŠp#Y ¥jì ‘QÖÔ3yæœy䃹³§Oì¬+J°ÕSå…G3§ Œ†¹g\A}Ï´yK–¯$ ¬X¶hö¤öª¬0'Ceq>$ „dµ¬|’ËÚ&Ï[¾vÃ&òÁÆõ«—Ìîo,ˆv5Q•àc‡%#f.a9 ÿ´ê®KÖnÞ¾“|°cÛÆU ¦´–Äy˜ªIò#[ ¯c”YÛ;{ù†í»÷P vn]»dzGY‚§¹ºÂn]» ¬ºþ¹+7íܳŸ|°w÷¶õKgtU$z™kH pÀ‚hÔDŽ",p°FƒGÀ „Gƒ8X£A„#`£A„ ¬aDÀf m[´oqÒºeGë¶)Zëz.Ù {뚉æýêõpj°÷p°ôÑ2ÉXûh°^¦¬—D> ÷2Ñz™ Èýd[ÊúÉÖØúÉ Xzúºä Ml=}šU0Ðz´…hmÇ‹€/4 ñB 팲ÐC Õè‚
endstream
endobj
137 0 obj
675
endobj
106 0 obj
<< /Length 107 0 R /Type /XObject /Subtype /Image /Width 132 /Height 58 /ColorSpace
/DeviceGray /Interpolate true /BitsPerComponent 8 /Filter /FlateDecode >>
stream
xc`£!€%™˜˜™Y蘙™˜˜Ñ t +;'7Í';+3š+.ààæå¡5äçãædGuÐ lœ¼‚"âR2²rò
4òòr²RbÂüÜ @G ⃉…‹OXRVIMCKGW¦@WGGS]YAZL‡ƒ):˜X9ùD¤”4õÍllíh l-M
uÔäĹ9XàÁÈÂÁ+,¥¬knëâéLSäïãîhe¤)'.ÀÅ
w+— „’®•›x\rzfMAfFjbtˆƒ‰º¬/;3,A0±ñˆÈjš¹…Äg”U×ÑÔT–ä¦DùÙé+K
p²ÀÝÀÁ'®¨oë ŸSVßÖÝ×O[ÐÛÙ\]”ánª!+ÄÅ
+©˜8¤T#2Êšz&Ïœ3¦`îìiÚk ü¬uäE¸án`æ”Ñ0÷Œ+¨ï™6oÉò•4+–-œ=©"#ÄA_IŒÉ
B²ZV>Éem“ç-_»aMÁÆõ«ÏìÏ‹p6TçeƒÅ3—°œŽZu׌%k7oßIS°cÛ†•ó'µÅ¸«Jð!»A^Ç6(³¶wöò
Ûwï¡-عeí¢©í%qî&jHn`áQе ʪ럻rÓÎ=ûi
öîÞ¶nÉôŽÒxS5I>vX!5êH)5£á0š/Fˇý£å$¤
‡Ñp@nŒ¦‡Ñô@Dz ¶í¼]M÷þÅ<,ý NX?kÒÀõ³`ýͺîëo¢ô»gÌ™K[€½ßÍȦïøƒ òøl &Ž.ã0%9XÆaÇ£Ò2i 2R¢C¼ÑÇ£`ãrfq¹ Ú‚@¬ãr °ñI=:O²#Æ'àã´ª qZ ã´ô ¯–Å:^Í ·çâ¡Ë¸½0öq{ #`ó´ŸÀÀ1ìü<lÈv” À ±ÑÔ‹
endstream
endobj
107 0 obj
730
endobj
144 0 obj
<< /Length 145 0 R /N 3 /Alternate /DeviceRGB /Filter /FlateDecode >>
stream
x–wTSهϽ7½Ð" %ôz Ò;HQ‰I€P†„&vDF)VdTÀG‡"cE ƒ‚b× òPÆÁQDEåÝŒk ï5óÞšýÇYßÙç·×Ùgï}׺ Pü‚ÂtX€4¡XîëÁ\ËÄ÷XÀáffGøDÔü½=™™¨HƳöî.€d»Û,¿P&sÖÿ‘"7C$
EÕ6<~&å”S³Å2ÿÊô•)2†12¡ ¢¬"ãįlö§æ+»É˜—&ä¡Yμ4žŒ»PÞš%ᣌ¡\˜%àg£|e½TIš å÷(ÓÓøœL 0™_Ìç&¡l‰2Eî‰ò ”Ä9¼r‹ù9hž x¦g䊉Ib¦×˜iåèÈfúñ³Sùb1+”ÃMáˆxLÏô´ Ž0€¯o–E%Ym™h‘í ííYÖæhù¿Ùß ~Sý=ÈzûUñ&ìÏžAŒžYßlì¬/½ ö$Z› ³¾•U ´m@åá¬Oï ò ´Þœó †l^’Äâ ' ‹ììlsŸk.+è7ûŸ‚oÊ¿†9÷™ËîûV;¦?#I3eE妧¦KDÌÌ —Ïdý÷ÿãÀ9iÍÉÃ,œŸÀñ…èUQè” „‰h»…Ø
A1Øvƒjp ÔzÐN‚6p\WÀ
p €G@
†ÁK0Þi‚ð¢Aª¤™BÖZyCAP8ÅC‰’@ùÐ&¨*ƒª¡CP=ô#tº]ƒú Ð 4ý}„˜Óa
Ø ¶€Ù°; GÂËàDxœÀÛáJ¸>·Âáð ,…_“@ÈÑFXñDBX$!k‘"¤©Eš¤¹H‘q䇡a˜Æã‡YŒábVaÖbJ0Õ˜c˜VLæ6f3ù‚¥bÕ±¦X'¬?v 6›-ÄV``[°—±Øaì; ÇÀâ p~¸\2n5®·×Œ»€ëÃ
á&ñx¼*Þï‚Ásðb|!¾
ß Æ¿' Zk‚!– $l$Tçý„Â4Q¨Ot"†yÄ\b)±ŽØA¼I &N“I†$R$)™´TIj"]&=&½!“É:dGrY@^O®$Ÿ _%’?P”(&OJ EBÙN9J¹@y@yC¥R
¨nÔXª˜ºZO½D}J}/G“3—ó—ãÉ“«‘k•ë—{%O”×—w—_.Ÿ'_!Jþ¦ü¸QÁ@ÁS£°V¡Fá´Â=…IEš¢•bˆbšb‰bƒâ5ÅQ%¼’’·O©@é°Ò%¥!BÓ¥yÒ¸´M´:ÚeÚ0 G7¤ûÓ“éÅô è½ô e%e[å(å åå³ÊRÂ0`ø3R¥Œ“Œ»Œó4æ¹ÏãÏÛ6¯i^ÿ¼)•ù*n*|•"•f••ªLUoÕÕªmªOÔ0j&jajÙjûÕ.«Ï§ÏwžÏ_4ÿäü‡ê°º‰z¸újõÃê=ê“š¾U—4Æ5šnšÉšåšç4Ç´hZ µZåZçµ^0•™îÌTf%³‹9¡®í§-Ñ>¤Ý«=c¨³Xg£N³Î]’.[7A·\·SwBOK/X/_¯Qï¡>QŸŸ¤¿G¿[ÊÀÐ Ú`‹A›Á¨¡Š¡¿aža£ác#ª‘«Ñ*£Z£;Æ8c¶qŠñ>ã[&°‰I’IÉMSØÔÞT`ºÏ´Ï kæh&4«5»Ç¢°ÜYY¬FÖ 9Ã<È|£y›ù+ =‹X‹Ý_,í,S-ë, Y)YXm´ê°úÃÚÄšk]c}džjãc³Î¦Ý浩-ßv¿í};š]°Ý»N»Ïöö"û&û1=‡x‡½÷Øtv(»„}Õëèá¸ÎñŒã'{'±ÓI§ßYÎ)Î
Σ ðÔ-rÑqḠr‘.d.Œ_xp¡ÔUÛ•ãZëúÌM×çvÄmÄÝØ=Ùý¸û+K‘G‹Ç”§“çÏ ^ˆ—¯W‘W¯·’÷bïjï§>:>‰>>¾v¾«}/øaýývúÝó×ðçú×ûO8¬ è
¤FV> 2 uÃÁÁ»‚ /Ò_$\ÔBüCv…< 5 ]ús.,4¬&ìy¸Ux~xw-bEDCÄ»HÈÒÈG‹KwFÉGÅEÕGME{E—EK—X,Y³äFŒZŒ ¦= {$vr©÷ÒÝK‡ãìâ
ãî.3\–³ìÚrµå©ËÏ®_ÁYq* ßÿ‰Â©åL®ô_¹wåד»‡û’çÆ+çñ]øeü‘—„²„ÑD—Ä]‰cI®IIãOAµàu²_òä©””£)3©Ñ©Íi„´ø´ÓB%aŠ°+]3='½/Ã4£0CºÊiÕîU¢@Ñ‘L(sYf»˜ŽþLõHŒ$›%ƒY ³j²ÞgGeŸÊQÌæôäšänË ÉóÉû~5f5wug¾vþ†üÁ5îk…Ö®\Û¹Nw]Áºáõ¾ëm mHÙðËFËeßnŠÞÔQ Q°¾`h³ïæÆB¹BQá½-Î[lÅllíÝf³jÛ—"^ÑõbËâŠâO%Ü’ëßY}WùÝÌö„í½¥ö¥ûwàvwÜÝéºóX™bY^ÙЮà]åÌò¢ò·»Wì¾Va[q`id´2¨²½J¯jGÕ§ê¤êšæ½ê{·íÚÇÛ׿ßmÓÅ> ¼È÷PkAmÅaÜá¬ÃÏë¢êº¿g_DíHñ‘ÏG…G¥ÇÂuÕ;Ô×7¨7”6’ƱãqÇoýàõC{«éP3£¹ø8!9ñâÇø ïž <ÙyŠ}ªé'ýŸö¶ÐZŠZ¡ÖÜÖ‰¶¤6i{L{ßé€Ó Î -?›ÿ|ôŒö™š³ÊgKÏ‘Îœ›9Ÿw~òBÆ…ñ‹‰‡:Wt>º´äÒ®°®ÞË—¯^ñ¹r©Û½ûüU—«g®9];}}½í†ýÖ »ž–_ì~iéµïm½ép³ý–㎾}çú]û/Þöº}åŽÿ‹úî.¾{ÿ^Ü=é}ÞýÑ©^?Ìz8ýhýcìã¢'
O*žª?ýÕø×f©½ôì ×`ϳˆg†¸C/ÿ•ù¯OÃÏ©Ï+F´FêGGÏŒùŒÝz±ôÅðËŒ—Óã…¿)þ¶÷•Ñ«Ÿ~wû½gbÉÄðkÑë™?JÞ¨¾9úÖömçdèäÓwi獵ŠÞ«¾?öý¡ûcôÇ‘éìOøO•Ÿ?w| üòx&mfæß÷„óû
endstream
endobj
145 0 obj
2612
endobj
77 0 obj
[ /ICCBased 144 0 R ]
endobj
146 0 obj
<< /Length 147 0 R /N 3 /Alternate /DeviceRGB /Filter /FlateDecode >>
stream
x…TÏkAþ6n©Ð"Zk²x"IY«hEÔ6ýbk Û ¶Ed3IÖn6ëî&µ¥ˆäâÑ*ÞEí¡ÿ€ zðd/J…ZE(Þ«(b¡-ñÍnL¶¥êÀÎ~óÞ7ï}ovß
rÒ4õ€ä
ÇR¢il|Bjüˆ Ž¢ A4%UÛìN$Aƒsù{çØz[VÃ{ûw²wšÒ¶š„ý@àGšÙ*°ïq
Yˆ<ß¡)ÇtßãØòì9NyxÁµ+=ÄY"|@5-ÎM¸SÍ%Ó@ƒH8”õqR>œ×‹”× infÆȽO¦»Ìî«b¡œNö½ô~N³Þ>Â! ?F¸žõŒÕ?âaá¤æĆ= 5ôø`·©ø5Â_M'¢TqÙ.
ñ˜®ýVòJ‚p8Êda€sZHO×Lnøº‡}&ׯâwVQáygÞÔÝïEÚ¯0 š
HPEa˜°P@†<14²r?#«“{2u$j»tbD±A{6Ü=·Q¤Ý<þ("q”Cµ’üAþ*¯ÉOåyùË\°ØV÷”›šºòà;Å噹 ×ÓÈãsM^|•Ôv“WG–¬yz¼šì?ìW—1æ‚5Äs°ûñ-_•Ì—)ŒÅãUóêK„uZ17ߟl;=â.Ï.µÖs‰‹7V›—gýjHû“æUùO^õñügÍÄcâ)1&vŠç!‰—Å.ñ’ØK« â`mÇ•†)Òm‘ú$Õ``š¼õ/]?[x½F õQ”ÌÒT‰÷Â*d4¹oúÛÇüä÷ŠçŸ(/làÈ™ºmSqï¡e¥ns®¿Ñ}ð¶nk£~8üX<«R5Ÿ ¼ v‡z è)˜Ó––Í9R‡,Ÿ“ºéÊbRÌPÛCRR×%×eK³™UbévØ™Ó n ¡9B÷ħJe“ú¯ñ°ý°Rùù¬RÙ~NÖ—úoÀ¼ýE
endstream
endobj
147 0 obj
737
endobj
73 0 obj
[ /ICCBased 146 0 R ]
endobj
148 0 obj
<< /Length 149 0 R /N 1 /Alternate /DeviceGray /Filter /FlateDecode >>
stream
x…ROHQ þÍ6„ˆA…xˆw
•)¬¬ ÚvuY•m[•Ò¢gߺ£³3Ó›Ù5Å“]¢É`¨‰µé²™ …} v*Ëìðèñ²bç{aÿ[QÓÀ'a?d‡yÖ ö®Sà{„=5àήÅñÚŠ ^-C÷T#hŒsMÄÓ×9s¤ˆï1Ô˜÷F9¦ 1w–ª7€;a Yªf
±]û®ê%î{wÓã;Ñ›9 \ Ir±ÙÐ< X}‹°I<>Î Uàw¨˜À ¹‰ÜÍ(÷ Õg£RVzWÆOã¹ñÅøelÏ€~¬v×{|ÿéãu׶><ùzÜ9®½UaVqe ÝÿÇ2„Ù'9¦ÁÓ¡YXkØväšÌL° (Ä>—ú’UÜÕîí¸EÌP>,l%ºKTn)Ôê=ƒJ¬ +Ø vp’Ä,Z ¸Skº9xwØ"zmùMW²ë†þúözûÚò mʨ)(ͳDf”±[£äÝxÛýf‘Ÿ8:¾ç½ŠZÉþIE?…9Z*òUôVPÖÄog~¶~\?¥çõAý< =ŸÑ¯è£¾ tIÏÂsQ £Ið°i!â Šƒ3ÔNTcâ)ñò´[d‘ý@ýf
endstream
endobj
149 0 obj
704
endobj
74 0 obj
[ /ICCBased 148 0 R ]
endobj
3 0 obj
<< /Type /Pages /MediaBox [0 0 783 559] /Count 1 /Kids [ 2 0 R ] >>
endobj
150 0 obj
<< /Type /Catalog /Pages 3 0 R /Version /1.4 >>
endobj
151 0 obj
<< /Length 152 0 R /Length1 10472 /Filter /FlateDecode >>
stream
xÝ:ix”ÕÕç¾ÛlYf&™5™¼3™I&Ëd' Cò&d%Y ‰‰&@0PÀ`#ˆ4ˆ€‚Ö¥*‹´¸ÐVñS'â •òYÚº”çsÁO«TÛŠŠK>[W˜™ïÜwB„<>}|žÏ§?¾ysÞ{Ï]Ï=çÜsνo¯½®ba3°ÐÔÙ;° 䟛 g—®î ˆâ 37/]7hâ| {Ëò«WGqe @íºzÕ†Éþ‰›ôÊþ¾ÞeÑz¸€iI?Dq‚ã«õàõQ\ÓžU×,¬OlD¼puïõ“óÃÄíkzW÷EÛ§S] ŠsjpXKë*rÚî¿*Þ÷è”òpºs7ÓÌï ¿þê‹3ÜšMªl§’ÛÓ
ì#d†3bÖ¿©Ù4UCkéÏ „æì Ô!ÌA˜•=ª”ž"w@b÷„¤""ñuËÿ '¹Èÿ÷äw€äJ1± ZºÕ'.ݺµ.³BE ”# ’jpÉiÕ˜ëQ1H挹œ˜ÌŽ&ÌX©
1T¥.1TºD¼PT)IüÒõñ „Ï]åâg®ñ%l÷bixªëÇIJ‚ &Ï»‚ ‘âÅg]7‰¿*Í—–‰cn,G+09" (½I|h›\ò`–œ<à
’½câý49"îÇñïÝ*WÜí¸%š l“'ºæœ¬9d ="®v¥‹K°#‘4b·k•ØåòŠA’6&úi·#b£û”Ø@§ ¥èD%ÑÑ‹]2Å…Ñi=®cbFt†TÚZJí®Fцã{î¿Wô¸®+²‚äá'ë2²\uî{K‚dBžƒ&H(MÖD“¥î§É/¡2I'¤‘=‡ê2‘frǘ¸“½‡ê2JÓ‚ì9I/ r×¹·!” ¤!´I«äQìR,S´)ŠÙŠLEºÂ¡HQ$)•z¥V§ŒQª•J¥ 䔌”‰ÁÈ_¤lªE‰‚–&ÝmÀÉy-CóøÂ70DÉÀ<
p³q]¹¹\?Gç©ú–W\ØS•ýÍÏüM6ÛLl{ZÚm Bš‰Ø:.©ÿ¿dû*±wCó†CÍ>ZTÝç¬îqV÷!ôv®ë76/±ÛG?Ú@+ì6½gÉÒ~šöö68ûª 9«ì£Ír¿iÕ‹hu³³jU·¶.’úªÆš¥æjgoUÇ¡¦êºù—͵cj®ºêo™«šVGçj’ûM›k>n¢sͧsͧs5IMò\ÙÙÕ+Z*?:þÈáw«@ä
„7in‰|¿êH(2ÎRK™Jáíó$ž < ›ÐÚ¼ ‰
œ0N
áOÄF²àuÛð7°ÂN¸ ßÕpŽ|ŽVæ’mJ` ü öG` Êñ9Gx0ÀLø ²1òlä+¨„8I$Ø"G!†ñÙ ûH ³$2ŠV¯Ö£UßÏÁ‘±È‡8~ ¼Kt$+‹üŒÇ/쀃ð$q'É"WDÞÅr3ÒØ#þÈ:ì÷ ¶Êƒù°gû+I:É&{É[ìxdsäǸ¶d¬kƒ¥ø¬†›`7ìƒÇäVK¸dÞ€ãWAÖýþçàS4¸™¤’\ϼÊ~Èþ+ãöFN" m8_ì',rÅEÚÈ22@ #‡ÉoÉçL)ÓËzÙW¹î¤
¶Ãð4ü^?ÃG0_CˆpHÓ ²€l$?Å~cŠ˜nfˆ¹•yƒù„-`ßâÜNþfþX„‹¼ùiN,(þڡŸå°®ƒaQÀ.…ß"µoÃÛDM´$ZÒJ® ? àNr€8 Âã0c‘óÄ 'á%¤ë¯ð |KÆÇA
ÉLÒD"…«Èjr#Ù $GÊcä¼F^#çñ ƒ…Q19ÌL/³Ÿ½°›yEæO ë`3Ø ¶m‰üƒ}Œ e?åÒ¸Nn-·‘ávsûùd~6¿˜ïäø{ø#ü üóŸð‚M‡…WJÅ ÅnE˜¤"-v’‡á8jݽì â.˜K¶¡TÁ Q{Çáwp ¾‚ðKbƒ0K¥™ y ‚‘í(ͧáWìÀw2?aæEÊÙ‡Y)Œ|c壼.> eef¸ÓÓ\ÎT‡]L±%'Y-f“ј ×iããbc4j•R!ð ËðT;kzìôž —ˡ¸³ z/)è ر¨æò6;í׋U—µ”°åòi-¥hKiª%ÑÚ}àËñØ«öÀ©*§=H:¶cþ¶*g‡=0.çýrþ9 ‹y‡;Ø«ÍýUö é±WjÖõT÷TåxÈQ :ÇG$ÐÐ0·w+Ì¥-ªVgUuÀâÄ<Ö±iÕ½ËM Û««’ ŽŽ O€Ì]ê\ ge >{²;í‡F0¹ çÎñ¬ ý°3f™sÙÎ Kzh®·«=Àöv˜ :‡.;`rVL7¼kþ½˜«¾õ’Ê “VÓÛ7Rzv"Ó)ÚC±Þ[kh±ã°ÌÍ ír3G‰i®"ê&ÒzVÚ*g¥³deò šÚǬ’µÚÙSÕ€æö1‹d‘‘ ÏQó¦22åhNENMË æMÑôýÑò—OÐÔ¼éä_0mhžâ ¡s;ë‘Ì€})N‚¼@ZgÒWßLY:Ù‡¿‚«\ôÌ
0¨JlZ€O«ï
ln™$£·¿j’¸•Uc*‹UöK• ؾgD; ˆíµNûÈg€’uŽ|yIïd‰¦ý h%•ÿ”
HïÅü:ê?ÓÐ%õ›ýT|ëdQ#î4W_R€8õ[9pz‚ jj %äÇ A¹9U¶£è`Ø«®Äêlªp+ªp:D< ,Èr`)¨Á‰j¨fØGì#õËFì5ö~T).MN±¢o¤#ÖÒŽlÖvG@êHšÊöutÌÂqré8Ø›tà+'GÀT.Ê a£Eée î@šÛ)‡;§8,%àR;¼yšÙ…ïÝ0_q Ëù?À^î‡ eÜ;°ÓZLË1Íc‚ó• ž}T;6ØŒeô aÁÇÚ` ¶¯œl?„y« ïà™ðpNïŽð¢Æô*WHŠ»_*w«8ìÃà©ðŒñ rNs$/Ø0vç6Ô¿6äƒr_ÈG¡ ¿Hçйör/œâŸùzNk>ÿ8%
¥Aˆôá<)–| ÿÇÕµ8¢O냼ñ‚|]±Ã€ O¾hd¡,ò7“»
eç…Yp»´ Œ).Ù@vîõ’þÏ÷²ÞwÆÅòxšN°f㙄KÏMÏÍ¢\’&5Éè™%*²ÔO¡fV‚ ü¹³Š³æ¤[}VRŽÒ_l)óýšXÀuäq—å ŸÇeùÏ꼧Þ}7ÊÇËqa§¼:½É«÷z M)dä“nè&q$ž
Áh,*,)u—”–ÏHw¦*…óŽB<éM)Ädpä7¶t¦¦Ï(-)M`ÞJ*Í—:Ý• guÝÇ>¶ uvwg_VŠ:<®ª]KíÜÉ°ÉÉáçcÕl™¿kðîÿ¼¯íçŒ^gPÅhMîæúŠU·¢Ž·–Î-*L+¿½ëŽÚÚß…cfÌ›™›å˜•&å?rßsB/vQÆ#ïpûø¨ûv¨”ÒTvMœ>,.½B£¶»xacMµ‰j1Ö±8Rw;šæGš8K2.³b¼\‡Ë÷äƒÞÈ8SÝénƒÅk-ÒãÒÝòÚ)7ØGþù÷׆› ¼áHrI…}Ú
)Þ=÷ÍJùÑ\gøùÏÂá±{ÓþDh¢1£ðÂà؃wÜÖ°þÖ`”ÞÚÈÜ ”»
o ÖHÕ{Œ™ádRoh×÷ë¯WoÐ
HxÖ 43g{™s¥XÆ8uŒöÉW¢&E[/BIŠÉfµ+KLÑ>쨛\,^741N¥;®óz½å¾hJeº…š~q&Yª›ÃÎk¡¨3V«tä÷ÝQœœ\tÛ²Vqª[o þêK¢ÿÇ)›ÃI̱ٕ·7nº¾~ûªE[‘™_ ™ü€ eQŽ:݇²ÐâêHžs15ÈÆhY0¹´
Ams©5Öš
"ë欢µ$Ö’"îvÔUOê(Ê%ñTP=Q,Ý`4¡< ÅqÄ™
”ä‹b‘u”¹ao>q„?š½oð7áó„¼ö䦾9ÍC×ßÀu-ö3ʯ¥]½í¤øSb"Ò…kßþì¢OߺëW¸có"g¸Y(wK*<*Õ×(‡w‘=jN *^ÐòÖ¾F[o¿…Ü ?,ªY#kJ0&˜ê”ÆFS½µËØeê´ž!or ØÞ·a×Î#5ÚíüV-ÇÉ=RÑ‚¸«â®‰cãâ’WªCaÒ{’4F–IeKLSSzb6Ç01V#ÆÝ“bqºµ“*g·_ç=;žeÇ)”¦Þ›× Bn¬í&k»÷b.q–Mø( ø**Ä
H¥Š,Òi¡ŒWÇ‘cŠWl£VJÐ0!£Ð[ÖÒ^šb"NMç^ ?CÄwÙÁ \{ÝGË×ônn¸í@efaR~ï²ý$†ä’$ü|€?B½
³“ LpSE b,xp÷‰° ½ÒUh˜°Ä„-5ò·=z(›,XjÂÛ>5¶fÑ[Ð;©Àu"ú«»°µï-$%ЃwfQ]˜8òz}§'ðVµê=@c…v¹|¼{bœjƒÑdÈ%(xC‘Á‰Zá,.¢¶§ˆ)ô¤›×f ;>»_Ùœqþ%–=DzÅv»ï¹ w²×”– ¥ã—2L,QÆlÙ®eM±æøå±,ï2'*4®8Ù¬dJLV«²Dg±XƒdÝ¡)³-;aÜür€åÃ
C®…k×NšÙS¹Àa‡âôm ÌG·Ü244<<Ää†?¿ÏÇ$]ª…$†^ynìÀÑÑÆ–‡ %mÿ˜t†ñ1#!/‡Â-Ü^ÔÍXÔŠyR¦)A©N¶2.»Â*¨] Kœ2Ö [¢µ¦
b’hv[¾5
‘\]ÔÉN9rtP¬§.DŽ„¿QaxF:}¾æõC6¢
‡þ¸eQ^Nø=¢ËqÕVfÿ3?™ýqNpã
¿þ$ü—ðË®êгü'ÔfÖ#›‘v_¸ m'(íÙ¯§|˜Ì|Cô
¤?A0Ź¬c +&ˆF·Ášª.±ÉÔOÐ#PC;ig¡ÛETÞ “¿1µÝT¸À¼7'#uöžU[Sfî–Z ŠHBø=û}·< þœhN¾¼©åÆe ~ü‹GÖÖí`o›¾øÁ¯µLiåÕ$÷Ñ’j¶ ñç¹.ôXóŽKj1ñ±BÔJ–E¬£¶3ùŒÄ°´2LœÆ cI4ɲCŽ¦å÷èiÙØø»‘tJ÷ijN1¨AŽa5Uâ(“™?k’²bÿ£Ìþ+ÑV4mæº Ÿa™ò¡/¸Êã«3æFyYy¿©ôB6zÞMÒ•VH·Ä²*ΡÑ4¨ë5µŽ*{]æk¬Ò–jQsÆlÎhõxô
Γ¡ñxâ
j»ÍèOUrþ4kn Øüñ9à϶ää^UN`Ð!Çɸõ0¨Dµ‰*wè”ö”l`®ì¾’t9üe†afñ 4'œÉ!Gœ²Hhb@3nO/&d©*¥øöÖ¥áÈÑÆÆñ×þHP ï–¼µÝ ²²"ÛZÿq! ù ?0u5Ú½……ùËìÜêªÍ»þôг¥öY³ÜFÓÌŒ…Í <õ§‡YÜÀŸD>d®çûѾÌ;¢õÄ‹1 ÝSd-p¤K2* K ‚E/Lp*7Ü…r2IÜ!GÏißÙoÂGåó?~ùÐ7^Žþ¼ ?¡˜žûh=®MgØM¬££©‹cmqÃÏÏËgW¿@òÃ/¾:1×AÈ«¼Â_°œÙO÷iä ׆6Ï‚~ QÊUÆ,ãLã"EŸB°*Ô ãbÕ<ÆõÖXµÛjÖX“I‰Ù’”üÑ£öDïõ‡NË<§}9+ž½ähúF+¨žSÒÒÈF÷µw•à'¼ðGœÝ8w¨õÓÖ<ò1Wº¦;¯e´‚Yxþø^¾0Áçy¼çs§
ygEÛ¼¿= ð3i[h– ?~…ߺ¢ej±êf]Ï µd; ó»ø_òOòϲï“/ˆŠµsœ[Ïóc'ÄÇ!†Ç'XFdÐiIÌËãN‰9ÂY}”ß–uóµf?ÆwøgÑþÞ,tŸOïå‡s³‡´
Ûoè89œkžÊG0õbèA l) ¯¿Þ@¤w¸ÊóÇ¹Ê g&×ÑÄá§,ÂJ»”hÆ—ÀYÕ¬›qqéB–º„󪫹zuס¾‡Û£¾Ÿ{B}˜{RqL}’{^ý2÷¦ú]î ÎıfŽgÝz†! oæXÞÇM2«5*·^¡Tª5fµJƒËÅÛN¡æ@àYFШЉ«¼ a‰ZÍ1þE,*ò°ÄôÅÄ>Õ¶ÉÕ[¢æ Ï|R{÷ ÂÑ {ñàãCÿ€‡q¢ ÎVÉìÐþά凳‡”—bSuü°ÖüMK¦%ÝE*âH"|kˆ• †÷‘î#c¤%¼ó?ýõÓLcŸ$¾ÐxèRF£FÅãÓÑ+¥ŠF¦‘õÇu1]lwœ ã\jÑNØQl&$Zº’ô‚Q¡NÅò"q+ qDmÔ¹Mbò]Ôãàj'uÊûNŸ}Ë:]²,nŒæÑùœ
á.‹•ô¼
ìш›¦Eöl1Ñwøl8TbKLOš›ÂDÃ|õiþ…ð…‘ó¿å_â˜s„Ì[8ì?ÞÖµ“ô
x?3ù?^2úÍËŒÙJü‚j¨Áo÷uPÿÓˆq׌°B3´@+þÀ"XŒ_õ;à
üÊLc6"çz6j®÷ÏÛ’]×·j]ßàŠ¥½9•×¬ZF[]üõc†þOÙ6„»è‰ù0ÂIz•qa;p‰.„U˶!Üp á0ÂI„Ó‘É ŽSy‚ç²ËñÞiø’iøÒi8ÎyÙx2ÿ.ù´ú«§á+¦á+§á«¦áòÿü]2þšiõ×Læák§á×NÃñæö²õ ?/¯›†_9~^–îÿêpÁ0
endstream
endobj
152 0 obj
6652
endobj
153 0 obj
<< /Type /FontDescriptor /Ascent 770 /CapHeight 720 /Descent -230 /Flags 32
/FontBBox [-1018 -481 1436 1159] /FontName /RIMCCS+Helvetica-Bold /ItalicAngle
0 /StemV 0 /AvgWidth -479 /MaxWidth 1500 /XHeight 532 /FontFile2 151 0 R >>
endobj
154 0 obj
[ 556 0 556 611 556 611 556 333 611 0 278 278 0 278 889 611 611 611 611 389
556 333 611 556 0 556 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 611 ]
endobj
76 0 obj
<< /Type /Font /Subtype /TrueType /BaseFont /RIMCCS+Helvetica-Bold /FontDescriptor
153 0 R /Widths 154 0 R /FirstChar 95 /LastChar 222 /Encoding /MacRomanEncoding
>>
endobj
155 0 obj
<< /Length 156 0 R /Length1 16008 /Filter /FlateDecode >>
stream
x½{y|”ÕÕÿ½÷YgÍìûšÉÌd²ï$$1dc AH`„ „ThT‰dÜpa3„ÄR
‚hµÕ
ÖÚ¦ÚþÐ*03ï¹Ï„ùùöã ý¼3sîú,÷ž{î¹ßsîÅ‹–´"jG 3©eÁ $}¿™6¿eA"¯§ñÓÚ{y.êçÍX0s~"/>†Ü9sÞ²¾û
O äß2«µez¢ ]…¸h$ò¸ â”Yó/MäuÝ¿2ïŽi}õ†2È7ÏoYÚ÷~ôä=··ÌoM\?˜^Ÿ²àŽ;÷åéóÚ,jí» 7@ûÞDJ³Ñ H†æ"¤oBÂr'b¡–ÖÃgz†bÃmIeß (åo«{XŠ_ó¾rî»Ö«AÅ£â÷P »v=ùP,„C}¯âÑþé>²{P}zTT”ž~“µã è g€4?„–z ˆíOí†ÜaüP+†àeȆG„¬{¼Áê¶Èî·{0ßý”ûËgG±FïSlíR!ÙMrü ~MGnüòã娥âBóÜÍPµ- jb¤ãÝ]®<÷«8ùY ÷‹ÅÝÉÍt_Ìí!¸Ë}"ØÃBô+äÂIîãΧܿtÎt¿
´7Qµ'W tïvÎsopõà]îõÎ ÷<šˆ–8áÖƒîù¡Mîé¹Rý¨M=do—»ê'„î¢b¯»ÐyÁ ì1ä3£Üi¹¿s§Àp™ êkÝç÷`¨r9«‚ƒŽâ=xJÃÛºü#ÜG Ý=0©pß!‘‰ˆDCOüFŒ =xo·†¦ q—R|Þw Q´/ìfiŠ•*4„¦!€,4Eð/zxt¿©ÜR®ª-©®üß‚f©æZ˜þ¿,ØÙ4²¾!²ÇÙÉ£‰¸³ñÚå–k‰ÿ5^¼ªZ+ÒÓGŽ[v mÁœU¾ªf_U+Ps䡶Y–HûTgÿœ´ÂaÍS§Í¢qKkd¯µ22ÇWéÙß&Ý7 znóUîG3ªÆ7ìŸnìj ·UùZ*LXÔtûÖô¿kQż«‚>l}×Té¾ïj¢ÕS黚軚軦†§Jš]_qçbNOÕì‘žHj}døØI
OKceÞ…•Kw i¸c(•kG66¹Š tžÆ±[âŸs§‘&6?þO¦õ0%+/CÇÑ/Ð6Ô‰x´ Ò©h
Ú‚^Çs`nOFÝè v¡,н,êA£Ð8 Í@ÏÃõ‹Ñ ´íGJ¸g>2Bí:ì/‡|ÒSѪø³(£Ð1TO]‡zã»ã v ºíA{áþßb ÙÏêã/Å/ …g®‚š·â£âH‡2P¥«Ð«ØÏœÏBT
{=¶£_¡¿ã{qw|V¼-~6þ)ˆª9P=|Wànü)ÓÉ>"þe<œHEiðÖf´=Ïï„ïqPUx.^Œ7à$Lî%Ýìýœ9>„P
|kA+? 8ŒN¢¡ïñWÄÂh˜ÅÌ©xaüÿ! ½¤=iEmð]
ßuЧ£˜Ç9x ƒWàÇðFü’Fn!
ä.²”|ÎŒf&3˘?°w²]ÜZn ¯ˆ}?? ™‘ÝŠ¡•Ð»è,º„.cžåÀ~\Š+ðø¶ãmä0ÞŽ“1ø8>Köà?áÏðWø
ሒI:YL6½äù=3›ÙÈ<Îü‰ù† Ên;w‘÷ ƦÆÖÄ~ /ÿT¬ˆ¼02h4º
µ@o ôsèÅ>øv¨D§ÐëÒ÷3ì@½è;àÂ:lÃy¸¾£ñÍxžŸÂGàûªÔ–o ‘-1©'SÉ|ÒNÞ%íŒIcF0“˜NøžaÎ1W˜+,ÇêY#[ÃGkÙùìVøî`w±]ì›\ 7”ÍMàÚ¹5ÜZf÷wŽ_ɯã»ø¯ø¯A-ŽîÖÂè¼2û+å >,NÖç¡ÛÑ4\‰§¢M0Ûq ê 階 ~-@©ñ&f%SCr@^E?iÝŠV 5Ìd´=þ>³½’2 ÙŽv²ÈÉm†Ñ¹å€õ}á´Pj0àOñ%{= ò v›Õb6
zV£R*ä2Qà9–!eTùª›=‘@s„
øjk3iÞ×-×4ÃTöDªo¼&â¡÷µ@Õ
W†áÊ® '® ÷_‰5ž2T–™á©òy"¿«ôyzð¤±
þE¥¯Ñé•ÒuRú)‚´× 7xª,³*=Üì©ŠT·Íê¨j®ÌÌÀ‡ÃÀyfU a¤ Ž a-+@Á¢aôŠªˆÍWY±ú
uŒ¿ªezdÌ؆ªJ»×ÛeP4®Þ‘™1;íD)§û¦?ÔFS›iªerC„iiŒfú,mzÄì«Œ˜—_´ü½–ªZ{]e„ø«[Z;ª#á懀¹4ÛLs-k!7²Þ%÷76Dðý} mœ-¥ÍM¬ þæ9žˆÌWá›Õ1§˜‹Æ5tÙÂ6IùFИ†.kØ*e23[V–z¡÷‡3oʼ‰Æ¥^ËÊDü—ûåo §±eåÉO 9®Ÿ˜rÀ7 ÚñL“^âƒÆÓ µuL+>Á§C7gC{†EÈ ãpþá-‘öúk͘U™h\óœÊ.™Õ&-Bp}s‡f0Œ\¯ñy:¾ÕºÙ×û÷KZúJx¿æD+é@÷ËJ·\K·ÑÅÒ½žeñÍ¢ãÛ&)ä}–ªë
OYCÛ 1À>¦Áñ4B ÉŒ‘=H6¦a?Æë{püþ Té< •¹m
TgPQ›] ï‡Lf¤y!••á©†7WSYñtx:†OïðT{f0±~)†ŠÖŽÆlà`}ð ‡7†íýÉÖÆÆÁðœlú ¸.ïh„'Ìé{ÄRQv.ÊɀŔ ŒiÛi¯´G•0
¾ÇÇ4DŽƒä66ÂU¹ý-…¯˜méks ´97
êóOìÒhìè Ϭoðy#Ç;:ì t¾%ò=
,÷ô z eyn ÷BäóÚ¥1ðú¼Ð¬FÊÓék˜ý?s¸¨¿Ýpç hm‘Äáâÿ‡K~
‡ÿ$—ö·ô—A›K)‡‡üßqxè
.ÿÏ ÷·y´6,q¸â¿Äáa?…Õ?‰ÃUý-½ÃÕÐæ*Êášÿ;×ÞÀááÿ™Ã#úÛ
!qxÔ‰Ãu?…ã‡oîoé
m¾™rxìÿ ‡ÇÝÀáúÿÌáñýí†FÞ /qx‰Ã
‡~‡û[z‡'A›)‡oíçpØ A×ëáöjý×óäëXH‰Ó¡
R†s ÚÔÉÞ‰Â@'ûâ\(ûŒ›€\`“Mz o 䟀ú'ø=h3_‚Æ@¾êº!nf?C^ˆ jƒ{J!.ª…ç9 ´
Ÿ¦?õí^Ï[EËèõm@edZõ´fÈ·CZÑGFhþ5¿“¬¡W!ïA“¨àG?J qpµpÃ5 gÕµ"$ä`9ýðQ‚gH’ @ƒ´ê ¦m¸ñc‚¬,<+²!;ØyNä»ÎL2òéG;/= ,G„2Án¥ŸøÎ +ôØ-;È8²’‘3[™«ìP¶‡ý„›Ç}ɇùß›„“b²X$C²9²¿ËÉŠÛ•&å åcÊß«†ªšU ©‹Õ‘¤ä¤MI i^Ñ*µ3´WuEº7ÀØ©€®Ÿ»›¾—'|j"øÖd@¢¦¡³@4iæ£ Ä!H ¡#·&¤ §phBzNn¾Ö«
U°ëz®þ™;vyX[wü3Àý=±³¸ ~e†Mȧ–Oå³Ù&ȧ#Ñš4Õ’>Zs©®,Ú;ºªµòsT^×ûNonŽ¹hPQaA è+Ì7xaO•# “ùçšÛÞRÞ’™&(„󿹫[b8» Iï`P ¬ÇiŒœƒàéÈÊrÓ½ôé£/ÕEû Ÿ›3(ßèë|ëóàd aGáø¬ƒÛ#ê@ ÃæÕ ®…Iœ£PP銙;,Å
WSÓvÒòNo´•÷–C‡- »*€ý¶€ÌÏLjK*H.ÛEHixH™•ÆT¬'XåŽT¤e! ~Lés¸MÍ&F ^O0 -¤óꊴėL´³)Ÿ ßÝ óPà5zGÜÿ«ã÷ŒÛ´âpM€=ÄT,Á©ß~¶¬úå5S‹§ÛõÕÐa¬[pÇÈÂú¹+6¬ yÿѶ³±oŸ{qyM먢܉söH|Éù±q[Q.:vWÖg¶†¦e. -Éä7ðH1]nI7¨˜ïs
…*0h}aƒ¶Pós•*×^˜Â …¹*˦`¥¶<ÑIòâ¬;ˆ;乇 ’üš¼ë¸Ò{)!xÀ”KÑÏ5½Ê ʉ%EÙ9Ö ’q§?9À#&±Œ˜ìpøÜ©Èæ·¤b À®l\^;ð, A¿0jʨ4Þsð 7±¤0ß²—G' /™
]8?OšŽ 6P6‚× 8èÂFòaÓÅW”©Õ‡Ö½øòv_ï˜ZoZ´¥µ»*Àu…oÇÆ¿®É¨^øóØ¿¾ bó™‡ÊnYúXÆO3ÄSüÈÜÅK+–?³à̯¯—ïtïoÿ],l…yùp7ë•tT^ØÆ¥ Lâ¹ ¦7‡§³È*ʦ{—Þ˜à 4}S Tˆf¨ f¹è³·àÃzÏG7Hó Œ¸! ûˆ¤×χÇÔâ< 32›Ù-òÝò YœO•c$ð<&¢L ^‹ÖcËý:(3pœ_( #“³<‡3ˆ¸±7†eàFáer†ƒÜ®°N¥¢~
?%·*UÛ½k§@££/Yê¢Q«ÔìêJ *7—•—ÕE¡'Ú’r:¸ ÉÏ^•¾B3¬=ö¸=žl\eé+` €9Ù˜ÞwíjMY™ ”›ƒ›š`,XŸ}Œ—ñafÝŸzïÿ”ÏoŒ }ú
ò™DÖDïb¦] †{bµ7&ÅÏs ¹‹Ò*µ?\jç6ãM ãÆnö^¼š[£çêEæ§Vkä;å`£ÌE\.+“KJ5¹Z›G–kµº=Û½sf$¤w´æÛ:[YP/ 4!AÇ4ç`ä0ûõµß P˜dyHeÐäa6I#8 Ç!&cÂ2r‹2%é m| ˆ0TP±¦ŒJl"”$ÄVÄf_ö%#FGÅuP>LqI«j@^}¬ hOxOu}ûæŸ_}tç× ÛúÎØ{qôÒÅàšTîbìüÑu;boÆNÅb±_în|ô‹'mû ~Wý³$/€ÜLN©`EŸv¯ÖnÒ‘¯–ñz`µ0$„ÉÙÖ›(µ%}ðÏØÓgH=ÎÞ¹±a[ìhç cðŽÆ‡êk°g]ÙÂéß;{ëËc±.IWùâ 0ó¡zTN–ñV~¦b9¿™pKY,“±:¢ZÏÊ´~d3Êý‚Õ`ìÁcx×.¸~@éú# º¸ ƒ
ð&†`X£A_@+µùÌüA3b~áË£s>ë:… ™ùÊ‹³g/]6ØætM‚=Lð’ Lu$¼œçü\P¬„»¸™-L¸Yÿ"(v0;XÂq©bH¶Kö=á€a"'cÞ!˜ãxØK’’Ê0~ ËÊx:¡ˆcÁ}I½—/9ÂÊY¹À‹sùŸñ_ð oSa¹_`Â Ñ 8úmÖњϛ`ò•Áä+“V s‰¸º.+[¡9E§«9néòS±L„™…-l ›ôùZì•a/´¾'N7°>ú$Y ‹Fc;Á ‹7¢‘«È§ŸRe&õ™ }æPnXC\,'26?‡¬<ìÕ ¸¾QÐ&h´®œ*2-¬TOœ&_\ èê_ð¼Í°Sj–Æñ·áÆJ<”
–1&leÞÃœ ;ƒÂ®œˆ˜wð‡Ì;Š•rà‡ªŠ<@رd3!!yªªX^¬ª!IüÓUrÂè€a
¥ŽáE#h+–…͹ma•ÜÍ(ø¨“¨Êƒ’ƒzd5´L nƒ^°^*)Ÿå(`MÃQ=œ„íý*eÞÓM`$è"„YÍÕe-²+N®æ1ð´iÑB¼¨i¡žràGAQ!öÁÒb2j}›±ïÀÏaÛ16Öt*6‰{•;v%Àž¿<Œ™–yö®+!ö½Ì¢ ®> |†½öø»Ü Ã’$¼ÝÎX
ÆÈiükrF|]΃“û`Aæ ‡B—ËØ\–\…Õéz€ÚêWZÒ´ÍC6Šôúp^ ÅyyØ&Zò(ÎË£8/â¼<Àyö<ÀyHzŠô3 æi æ!]¡QmeÐyvÛÑõ;OÆ6ÆöØ÷Ø«°½cÿ[쟻ûäßبæ.^þuìlìÐù8úä}<§½ƒ5—ŸÅ˾–²ØéØ›—bû¹)°šf¿™CûZÂ…³•³uË”Ëul¡Á0Ë°ÜÀ
¢K«Ñȱ:É›¤r‘ð:%+3rY›)IæGV£©+x7^Ó^0 ßÖEµ0” ÁaYÒ [ Âtòë% ÀƒVò¡` "/ †N²ñä×çþË;Í´/¸3¶¯}`'wìã3/Æ£ØÃÝ1fÑ#tm‡]n)´UöÏca Žk¹FÜÀÍ榖r¢é(lHY‘ ;Â>¯'Ь[¨[b`t.·Áad¼.“
èRü.$“Ù—‚ vÑã7ºý&&7i¶Ýþ Üš:çݘXèd¢Ý¹öÅ; ’aºGÝ)Ñ&`&]m›`%M§Ë'¦ðGêãÍ£{$ì¸1 #³Ö™l *}LÍÚç
™³&»vÍsþÔ 9Qè².É•¬R˜^²TmðêË&|óH®=ÚÊõdÞ¶‘4FëÃiÆ.¡`Úå“»FŽzöô¯Ç®Åº+ÁÃŽ&åÞz>²uRéÙßo »6öäßbÿض!uøüŠÑë=CŸYšŸçÏÌ(œ|èµØŸ¾i+¿ó±©óò<9ÙÉ¥3O^z{íCÿ`ÁìÇ`#öuU„m˜w!°"¡è
aü {…·ŠÐQ;öLK×p(9%#UiÞBöõ˜ö71-w¬óò¿85LVúl8_ÃÁ³yôp¸òü &a< ÆK¹Ï1™ÉÎâ dk*ñë†Eqr˜# H“cE‘êiÂ<Å!üoÖA+`9£°²¤~ hI×6€–`/ÐU®h ˜Ã Ð1bÀ8ÄçV‹+4'¥€Ê>jZ¸p‘Œ tÄXÊwûŸ¢_ü!úWлNö³Ëà ¹RÛQ ¼:ñVкI/ãjhX†²âi ½F¨Bp¬ˆAãâ I»¥I°^†>§å`¹Ö'G0¿V3[6G#”ˆ:¥Œ±ç )2§Fé,M'Y¡ÒC¥¤4/ͯӜè&› =¸#ì3;ÝBЙ¥ ÎBE™PVæ0¡´])¶¡öcDR°Ø:dè+x3 Úa¼ õ—„˜_ˆžìWëå½ G©xÓ ŸÕ›ÕKá6èIÐS‹“¶úqQ’Y\v/2y ^ìMFƒˆÙœf/ *T†ŒRñí3žR$ 4«±dbo°?‡‚ ªDKÁ¼B
h5Ò(PXP4HÕ‹FßÖ¸É;+oþÔÜzÜ=Ô¨¼où/J½ò]Ü¿Ÿ;Ö¶ÄìWº´i¦4“lÐïïÞxìÈæŽ7'e ßñ¨ÑÁ«UŽì™xž˜aÉœ\?*þµmµµ[¢› É s¿’¯ð…kç¼üàÆçõøÕ¿mñ?²~îø¯\hA8k‡°ÓñžƒI“\0ŒÈìäÜåT( AÑæ±ei²piÞ¯ö kº†œ.\”„ðÓ‚.qÏ¢3ñro` £``½ÌH Zjc ¡¬Ði
àè })}¶&Øùm¥Ï7ŸùþÛóËÇç•ì 3 }ô?; ¨9Áˆþnl¬7v)‹”úêÖ¬øâÕÝ<øÖæ)ûA ‚ÌYv´äkÛÎÞiÅ[,»Ä=f„¨Ýf`ï´ *' #Án7k‚: f¶Öæ”ÍV ›xøê–Õõ–”ü˜õR †§_i”Z¯^R»Å
9°[¼’Ý¢0©`·@ ³ðj·xÄn‘ŒmdJX-è4I*ò©8Àù9÷™¹S³hå‹#r \¿à>k§ëë£o_ƺw ìèÈ{ÓîÛ5ÿ™í ¹ëÝS8ÿspæ€ÅñóL/Œ«9Ñ]á¼AêõDõNv·ó‹’äÔ Ñéôrâ4+¸,}–&¤ÕÙÜŠ Íêr¯ö.ª¸¾ûÑ à‹¹qlm‡LŽ0¶( o•Ü. ƒð“fŽv$á;0‚wˬR!í*,Ðå»~ûŠí;–?¸wÔç Ù÷lù‹w ˆ]þêø¶/Þ{ý·¿>û2¨À5’8/Ý8g^þO R žaœ¸pP¯)V†—m ·ít3œš$q£Z—d4„•aƒ²á‘ŠƒÌiüsÚþ¾øìœû}ßæ/|ŠÓÚÓ:2Yä¼)I[MΔ^L^§C;M
¿°Ù±Óqæ ë7%ù œU®´àŸr9[0%KZà;Þ áÔ+‰þ;QÉB— õì¦þ…“"%ꟑ¦C5ò± ÇY0Çòî X§½Æ ay¥?Ùž o°3€]N™Y …Q À*µÏæ…"ÑrÞ-`4U2’®‘ôMZzÚ=`… …`çSLb2z^šA @à˜á%CåK0|8˜tŸ+.Òi®~Å=²ùãs û…›sÇ-»iܙؗØògìV¤ŽØw÷.ûØš¹·Œ7âÙçN5Õ”>š5Æ¡u !¸"XR}ïLÂÚå€IgæÞw]8]pòr'ƒ“ %&¯“[aaR«´!³NÐ%©Ýj¢¾j°Z¬W½3W&D,ÚTr’bIÍõ‹e¹äûÕ
*ÊϘ•"é¾…ù…/ûÊ»µ)f‡U1ÎÓÕݵq#WQ0™ç ¾å¥uW§3O¬ÛíbÐX)óÈŠ[ò¦
׆‹Ãe
b£ìAånû.çîàŽôÃvEXdLÉ!õIy2,), rZå:§<)KÈÊâ L–)+3ÄÙr”ê jh è°fç\7A.õ–P ˆ^øƹϿZPöĸgøRm.…6ů ø\ JµA U¨½(ITùÉ ´‡@O(Áè[Hú04‹èÌ)ÌcŸšØÁ„GnP‘´Z¤hA= B}Zp&wOÉ/ÜQ¶ öú¾¿«©‚Cî{3 `Š¶¬x)v Gpåó?µÚ¿áî7gÄÞb+†ú†¾š÷FÛùm/ÔËÖOøxܘƒ¡¥ÂY±íÇ»nÛúò±Îi«H¦4Ϋ€©T§˜P}8fhÌb
ê—KDQ¯"zpÄk¼`TÊU!¹Í‚!d²š-pšö€wjB§\ƒßyK«E ¦DZ À¿‘XÁòKà;oUw8â½Ï<ìÊ]½à`7(ÿÆzKžk|*:–<×6¨aë¹è*‡NÚ!\
„îe… ÂE„“g$?!ÈmH`¨§pÏ-9-;Ù/và-”LlÉW¸ê|Ø´+ç¸coÐgÇÏÇÆàbéÙÚÄÙã#K&À¹cL÷Cè> IJ³pÒP
&Úì#Ð$í‹`Z<ƒS„Ž",òA\ÜÝ {vYnw <¢rºÙ޳߰¾ÉìÁ+ƒ– žJèÐôvà7µãhgxz#ÁƒEl%0©ÍüDn&·Œ_*¬æ3¯3ça§#á aÈ*òL†”€k’åà?_#%9D¸„?„‘ŽexðˆÈÁ"#òR€/¤Ë;õ06% $É Òç)§ QàñW,EMà9Þç
°¸°iu†äË@M€3¤} þýç±xÿç±®Íû¸cW÷âÓ±;¢S‰£#v»Ô¿5ÐIêeP( ’Ó·_CBˆ ›ë†é‡nb€ÖtwÓÍ%é0漟ý³ûÃ¥‚(¨ù$³hV›“‚bÔvu‚b¦BéóËmNŸUNX³ßë4;U¼€x»ÃÏèå© ´!8\Œ»l!z¦: ëZ– &¤5˜ÚƒU× îÍ¥ÞK×6À·Ž™^Ðï×6'Rlì“bó5”Â,Ù*ÔŸÑ/Õ]á‚Æ…í£3RÊžm}tÚѹus ?d -˜±³›ÍÞrsÊò”ê õOŒ_ D¾˜;fÝŽè£äèü¼‘O½I¥]’u¦tÝQœÎ=ÄŸæ Ëø ¡_,p%1X4€ÞoQÈm‚͆”!™Í³,!+²ÚBß0%ËXBƒA¿zÁüë›–Pšñº®Ð Àº¢Æà’Á«öŽÚ3똌CÎœ•áЈâL{7Þ íŸ2îé‰ÏÒù9µlºÊTQ¸pvôMh,Œt)ì‘x›)¥ÝÐGÂù[ÄMšÇM/°»Ä šÝ¦ ñŒø {QýWƒr°È;-‚Ò©SX«ÕH‚I6»,h´Úì=XoN®ýºWZj3`[8 ÐË`µÔ’ ÌâT’”˜¯ˆ& dŒi=¥õΤè$cŸZ–¦| ¸‰ÐŠÂ>¹?gÔ‘6mz_ýûãØU¬û ¿'íØ4屫]{/0çcH½„Ó¯ðS Ö»…õC×Õ°[¶8œ±[Üi&©¢Ç¡UóN£Ä«E²š-¶9 ko(9ÉêKùQt-A0ºÿ%õÑa²#Î`È ãL`«:€³Ô'©[cSD3 Sƒ‹V’O8èIU€n¼¶Ó_}äh• ÂXVgQøÖŸ Œ Z¼uÙ¸œÒîex»}òþ£Ó·Þ=q³ÝðÔ²Ø_¡ÏnºÐ5<ú1•Å²Ø- ‹5ÐGZ Î/¶ÔZ,»ðNn—ƒOufFáôzžqÚ&µ `Ó2l°ëç´z“¯[Ka!ÅCÁf_Wûzjw+Upˆ?@ìÐ?¥ä` ¹}h³nÒ½ª„«€â…¾uÓ§•'Ý ø.XÕõJM0}xÏ’øá[ó²ö¾œùô]{cÿŠ¾ŽWNÙiÙüPÓÓ¿}‡ –R½ñ2x7joÁJ81ŒñˆkúŠ¬‡~jÑÍá@ ¨15,«5D-ÓÊ”A‘N7\´é1ÅÓȪÓ÷à*P ¨Cû&¹sËëÊOFO^èÛ¸£kŸ4Åú±ŽÖ·f¯ñù¹œÅ©±k \*ápÑ6¼ÊÎEÑ-”çñ÷˜ƒìH8%³Â˶p›t¶·¤ñ©)þ`‘·Ú[“Rœ218#ef`™r™j™ºÍ·8e±q`‡kW†ž˜Ée²YzðòÛÍ‹1Ó•š¤˜
³"?ñ'«älºÞòšÃ©XgÖÖtE¶ Skˆ€²½Ù6·Åd š‡¦„`ª-Wíj†¢`–5'·« ƒªL`£
¤hwK²!ìó,Á>¤:.¥Q8“ŒàJòªÝ^$ ^ Þ$/‚½>/vê Ìn°x±')Ù‹¼Éj•”{qÀ/“ƒwÉ ÿ‚À¥ux©G)a'6…¤!i*\›à°A¤—|J×»”$Ô!üÿ>¥ÄZý•è¯Ü5}Ë௹iñ‡‡ÿ5wÙÆ>>cvUêè»NTÌþà_ð!n
yßFñ8é˜/ÙlX/œUOa‚f¢Yd3“_Í>ÈíD»ˆÿŒ Uìîv
wš=ÉÃSïL¥;µ°¤H& ¸Äzâ ºÁHó°=ø¾C 3_»°r_ØÅš‚7qRœÏÃ^#‘”…tD¢hœžî3Œ÷tྩO´?¹²Ó4yÙn¨:¶ø
Ø@`³gÆ ýý¥ØŒn^|^Å{-âc)ìh¢{)¯¤øTÁqú#Ÿl(o+¬DôÄ49Á BÏÑsctß ÃBT„Iÿ‘©DU¨ZúWÐpø# ýïO üoæféÿIãà?GãáŸ@ÐDÔ€á<“áéN³aéÍ<œnCÃêGN¬Ÿ^Û:¯uñìi-ÒR5'Î}ô5½îÁ 0Ð f @í@ =:tè ¯'ˆ=@9@a 1@Í@ €Ú z(t è,Ð'@_SÆ i€<@9@a 1@Í@ €Ú z&Þ÷AðéOcä§çñ®¯—Næ]w=¼ã†úÜù¼ùüùÁò7
ÈSKçú÷WÈStr}ýÈùQòuò7ȯnxÞ¸ùúùñòäooŸ: ?m@~ú€¼4'®ãÿŒõ3äg
ÈÏ Ÿ3 ?w@~Þ€¼ôŸìëÞOÙëùÇ€<ÈÜ
õ ä
Èß9 ¿x@~É€|Û€üÒùe4ÿ?2œU'
endstream
endobj
156 0 obj
10797
endobj
157 0 obj
<< /Type /FontDescriptor /Ascent 770 /CapHeight 717 /Descent -230 /Flags 32
/FontBBox [-951 -481 1445 1122] /FontName /CSKWET+Helvetica /ItalicAngle 0
/StemV 0 /AvgWidth -441 /MaxWidth 1500 /XHeight 523 /FontFile2 155 0 R >>
endobj
158 0 obj
[ 278 0 0 0 0 0 0 0 0 0 0 0 278 0 278 0 556 556 556 556 0 0 0 0 0 0 278 0
0 0 0 0 0 667 0 722 722 0 0 0 0 0 500 667 556 833 0 778 667 0 722 667 611
0 667 0 0 0 0 0 0 0 0 556 0 556 556 500 556 556 278 556 556 222 222 500 222
833 556 556 556 556 333 500 278 556 500 0 500 500 ]
endobj
75 0 obj
<< /Type /Font /Subtype /TrueType /BaseFont /CSKWET+Helvetica /FontDescriptor
157 0 R /Widths 158 0 R /FirstChar 32 /LastChar 121 /Encoding /MacRomanEncoding
>>
endobj
159 0 obj
(Mac OS X 10.6.8 Quartz PDFContext)
endobj
160 0 obj
(D:20130321112552Z00'00')
endobj
1 0 obj
<< /Producer 159 0 R /CreationDate 160 0 R /ModDate 160 0 R >>
endobj
xref
0 161
0000000000 65535 f
0000070743 00000 n
0000005766 00000 n
0000051354 00000 n
0000000022 00000 n
0000005746 00000 n
0000005870 00000 n
0000011960 00000 n
0000012255 00000 n
0000011350 00000 n
0000011616 00000 n
0000012645 00000 n
0000012926 00000 n
0000007456 00000 n
0000007722 00000 n
0000016990 00000 n
0000017271 00000 n
0000008733 00000 n
0000008999 00000 n
0000015639 00000 n
0000015936 00000 n
0000014223 00000 n
0000014490 00000 n
0000015955 00000 n
0000016252 00000 n
0000010720 00000 n
0000010987 00000 n
0000009966 00000 n
0000010318 00000 n
0000009311 00000 n
0000009595 00000 n
0000011006 00000 n
0000011330 00000 n
0000015035 00000 n
0000015318 00000 n
0000009614 00000 n
0000009946 00000 n
0000011635 00000 n
0000011940 00000 n
0000010338 00000 n
0000010700 00000 n
0000016665 00000 n
0000016970 00000 n
0000016271 00000 n
0000016645 00000 n
0000006782 00000 n
0000007066 00000 n
0000007741 00000 n
0000008062 00000 n
0000008419 00000 n
0000008714 00000 n
0000007085 00000 n
0000007436 00000 n
0000013251 00000 n
0000013569 00000 n
0000012273 00000 n
0000012625 00000 n
0000008082 00000 n
0000008399 00000 n
0000006452 00000 n
0000006762 00000 n
0000012945 00000 n
0000013232 00000 n
0000013589 00000 n
0000013893 00000 n
0000015337 00000 n
0000015620 00000 n
0000014509 00000 n
0000015015 00000 n
0000013913 00000 n
0000014204 00000 n
0000009018 00000 n
0000009292 00000 n
0000050447 00000 n
0000051316 00000 n
0000070470 00000 n
0000058840 00000 n
0000049546 00000 n
0000043043 00000 n
0000043945 00000 n
0000037788 00000 n
0000038630 00000 n
0000042088 00000 n
0000043023 00000 n
0000035654 00000 n
0000036421 00000 n
0000018945 00000 n
0000019857 00000 n
0000029429 00000 n
0000030255 00000 n
0000024376 00000 n
0000025159 00000 n
0000039655 00000 n
0000040440 00000 n
0000017290 00000 n
0000018109 00000 n
0000021834 00000 n
0000022655 00000 n
0000033824 00000 n
0000034748 00000 n
0000043965 00000 n
0000044954 00000 n
0000038650 00000 n
0000039634 00000 n
0000030275 00000 n
0000031062 00000 n
0000045863 00000 n
0000046786 00000 n
0000040460 00000 n
0000041229 00000 n
0000026901 00000 n
0000027698 00000 n
0000028509 00000 n
0000029408 00000 n
0000032840 00000 n
0000033803 00000 n
0000022675 00000 n
0000023544 00000 n
0000018129 00000 n
0000018924 00000 n
0000031083 00000 n
0000031890 00000 n
0000034768 00000 n
0000035633 00000 n
0000031911 00000 n
0000032819 00000 n
0000027719 00000 n
0000028488 00000 n
0000036441 00000 n
0000037766 00000 n
0000023565 00000 n
0000024355 00000 n
0000025179 00000 n
0000025992 00000 n
0000019877 00000 n
0000020776 00000 n
0000044975 00000 n
0000045842 00000 n
0000020797 00000 n
0000021813 00000 n
0000041250 00000 n
0000042067 00000 n
0000026013 00000 n
0000026880 00000 n
0000046807 00000 n
0000049524 00000 n
0000049584 00000 n
0000050426 00000 n
0000050485 00000 n
0000051295 00000 n
0000051437 00000 n
0000051502 00000 n
0000058247 00000 n
0000058269 00000 n
0000058517 00000 n
0000059022 00000 n
0000069912 00000 n
0000069935 00000 n
0000070177 00000 n
0000070647 00000 n
0000070700 00000 n
trailer
<< /Size 161 /Root 150 0 R /Info 1 0 R /ID [ <85542f9c37b9da76137c7991c2b876ef>
<85542f9c37b9da76137c7991c2b876ef> ] >>
startxref
70821
%%EOF
1 0 obj
<>
endobj
xref
1 1
0000074202 00000 n
trailer
< <85542f9c37b9da76137c7991c2b876ef>] /Info 1 0 R /Prev 70821 /Root 150 0 R /Size 161>>
startxref
74403
%%EOF
lcmaps-plugins-jobrep-1.5.7/doc/jobrep-admin.8.in 0000644 0001750 0000144 00000004071 14574533163 016505 0000000 0000000 .\" Hey, EMACS: -*- nroff -*-
.\" First parameter, NAME, should be all caps
.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
.\" other parameters are allowed: see man(7), man(1)
.TH JOBREP-ADMIN 8 "March 25, 2011" "@PACKAGE_NAME@ @VERSION@"
.\" Please adjust this date whenever revising the manpage.
.\"
.\" Some roff macros, for reference:
.\" .nh disable hyphenation
.\" .hy enable hyphenation
.\" .ad l left justify
.\" .ad b justify to both left and right margins
.\" .nf disable filling
.\" .fi enable filling
.\" .br insert line break
.\" .sp insert n+1 empty lines
.\" for manpage-specific macros, see man(7)
.SH NAME
jobrep-admin \- manage jobrepository database structure
.SH SYNOPSIS
.B jobrep-admin
.RB { install | destroy | show }
.RI [ "db password file" ]
.SH DESCRIPTION
This manual page documents briefly the
.B jobrep-admin
command.
.PP
This command (re)creates or destroys a MySQL database with a schema that
is suitable to be used by the
.BR lcmaps_jobrep.mod (8)
plug-in. It needs to be run only once. The database name is hard-coded to 'jobrepository',
and the database administrator's login must be 'root'.
.SH OPTIONS
This program accepts the following commands.
.TP
.B install
Install the
.B jobrepository
database.
.TP
.B destroy
Destroy the database.
.TP
.B show
Show the current database structure.
.PP
The program accepts one optional parameter:
.TP
.I "db password file"
This should be the path of a file that contains the password of the
database administrator. The username must be 'root'.
.SH BUGS
Please report any errors to the Nikhef Grid Middleware Security Team
.
.SH SEE ALSO
.BR lcmaps (8),
.BR lcmaps_jobrep.mod (8),
.BR mysql (1).
.br
More information can be found on-line at
.UR https://wiki.nikhef.nl/grid/Site_Access_Control
the Nikhef Wiki on Site Access Control
.UE .
.SH AUTHORS
The Jobrepository and the LCMAPS plug-ins were written by the Nikhef
Grid Middleware Security Team .
lcmaps-plugins-jobrep-1.5.7/doc/Makefile.am 0000644 0001750 0000144 00000000335 14574533163 015473 0000000 0000000 mandir = $(datadir)/man
man_MANS = lcmaps_jobrep.mod.8 \
jobrep-admin.8
docdir = $(datadir)/doc/@PACKAGE@-@VERSION@
doc_DATA = jobrep_database_design.pdf install_instructions.txt
EXTRA_DIST = $(doc_DATA) jr
lcmaps-plugins-jobrep-1.5.7/doc/Makefile.in 0000644 0001750 0000144 00000041455 14574774131 015516 0000000 0000000 # Makefile.in generated by automake 1.16.5 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2021 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/project/lcmaps.m4 \
$(top_srcdir)/project/libtool.m4 \
$(top_srcdir)/project/ltoptions.m4 \
$(top_srcdir)/project/ltsugar.m4 \
$(top_srcdir)/project/ltversion.m4 \
$(top_srcdir)/project/lt~obsolete.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/src/lcmaps_jobrep_config.h
CONFIG_CLEAN_FILES = lcmaps_jobrep.mod.8 jobrep-admin.8
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
man8dir = $(mandir)/man8
am__installdirs = "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(docdir)"
NROFF = nroff
MANS = $(man_MANS)
DATA = $(doc_DATA)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/jobrep-admin.8.in \
$(srcdir)/lcmaps_jobrep.mod.8.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DISTBIN = @DISTBIN@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FILECMD = @FILECMD@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LCMAPS_BASIC_INTERFACE_CFLAGS = @LCMAPS_BASIC_INTERFACE_CFLAGS@
LCMAPS_BASIC_INTERFACE_LIBS = @LCMAPS_BASIC_INTERFACE_LIBS@
LCMAPS_CFLAGS = @LCMAPS_CFLAGS@
LCMAPS_INTERFACE_CFLAGS = @LCMAPS_INTERFACE_CFLAGS@
LCMAPS_INTERFACE_LIBS = @LCMAPS_INTERFACE_LIBS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MODULEDIR = @MODULEDIR@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SHREXT = @SHREXT@
STRIP = @STRIP@
UNIXODBC_CFLAGS = @UNIXODBC_CFLAGS@
UNIXODBC_LIBS = @UNIXODBC_LIBS@
VERSION = @VERSION@
WORKDIR = @WORKDIR@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = $(datadir)/doc/@PACKAGE@-@VERSION@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = $(datadir)/man
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
man_MANS = lcmaps_jobrep.mod.8 \
jobrep-admin.8
doc_DATA = jobrep_database_design.pdf install_instructions.txt
EXTRA_DIST = $(doc_DATA) jr
all: all-am
.SUFFIXES:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign doc/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
lcmaps_jobrep.mod.8: $(top_builddir)/config.status $(srcdir)/lcmaps_jobrep.mod.8.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
jobrep-admin.8: $(top_builddir)/config.status $(srcdir)/jobrep-admin.8.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
install-man8: $(man_MANS)
@$(NORMAL_INSTALL)
@list1=''; \
list2='$(man_MANS)'; \
test -n "$(man8dir)" \
&& test -n "`echo $$list1$$list2`" \
|| exit 0; \
echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
{ for i in $$list1; do echo "$$i"; done; \
if test -n "$$list2"; then \
for i in $$list2; do echo "$$i"; done \
| sed -n '/\.8[a-z]*$$/p'; \
fi; \
} | while read p; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; echo "$$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$$base" = "$$inst"; then list="$$list $$file"; else \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
fi; \
done; \
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
while read files; do \
test -z "$$files" || { \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
done; }
uninstall-man8:
@$(NORMAL_UNINSTALL)
@list=''; test -n "$(man8dir)" || exit 0; \
files=`{ for i in $$list; do echo "$$i"; done; \
l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
sed -n '/\.8[a-z]*$$/p'; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
install-docDATA: $(doc_DATA)
@$(NORMAL_INSTALL)
@list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
done
uninstall-docDATA:
@$(NORMAL_UNINSTALL)
@list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
tags TAGS:
ctags CTAGS:
cscope cscopelist:
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(MANS) $(DATA)
installdirs:
for dir in "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(docdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am: install-docDATA install-man
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am:
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man: install-man8
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-docDATA uninstall-man
uninstall-man: uninstall-man8
.MAKE: install-am install-strip
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
cscopelist-am ctags-am distclean distclean-generic \
distclean-libtool distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am \
install-docDATA install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-man8 install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
uninstall-am uninstall-docDATA uninstall-man uninstall-man8
.PRECIOUS: Makefile
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
lcmaps-plugins-jobrep-1.5.7/config.guess 0000755 0001750 0000144 00000141423 14574774131 015220 0000000 0000000 #!/usr/bin/sh
# Attempt to guess a canonical system name.
# Copyright 1992-2023 Free Software Foundation, Inc.
# shellcheck disable=SC2006,SC2268 # see below for rationale
timestamp='2023-06-23'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see .
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that
# program. This Exception is an additional permission under section 7
# of the GNU General Public License, version 3 ("GPLv3").
#
# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
#
# You can get the latest version of this script from:
# https://git.savannah.gnu.org/cgit/config.git/plain/config.guess
#
# Please send patches to .
# The "shellcheck disable" line above the timestamp inhibits complaints
# about features and limitations of the classic Bourne shell that were
# superseded or lifted in POSIX. However, this script identifies a wide
# variety of pre-POSIX systems that do not have POSIX shells at all, and
# even some reasonably current systems (Solaris 10 as case-in-point) still
# have a pre-POSIX /bin/sh.
me=`echo "$0" | sed -e 's,.*/,,'`
usage="\
Usage: $0 [OPTION]
Output the configuration name of the system '$me' is run on.
Options:
-h, --help print this help, then exit
-t, --time-stamp print date of last modification, then exit
-v, --version print version number, then exit
Report bugs and patches to ."
version="\
GNU config.guess ($timestamp)
Originally written by Per Bothner.
Copyright 1992-2023 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
help="
Try '$me --help' for more information."
# Parse command line
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
echo "$timestamp" ; exit ;;
--version | -v )
echo "$version" ; exit ;;
--help | --h* | -h )
echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
break ;;
-* )
echo "$me: invalid option $1$help" >&2
exit 1 ;;
* )
break ;;
esac
done
if test $# != 0; then
echo "$me: too many arguments$help" >&2
exit 1
fi
# Just in case it came from the environment.
GUESS=
# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
# compiler to aid in system detection is discouraged as it requires
# temporary files to be created and, as you can see below, it is a
# headache to deal with in a portable fashion.
# Historically, 'CC_FOR_BUILD' used to be named 'HOST_CC'. We still
# use 'HOST_CC' if defined, but it is deprecated.
# Portable tmp directory creation inspired by the Autoconf team.
tmp=
# shellcheck disable=SC2172
trap 'test -z "$tmp" || rm -fr "$tmp"' 0 1 2 13 15
set_cc_for_build() {
# prevent multiple calls if $tmp is already set
test "$tmp" && return 0
: "${TMPDIR=/tmp}"
# shellcheck disable=SC2039,SC3028
{ tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
{ test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } ||
{ tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } ||
{ echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; }
dummy=$tmp/dummy
case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in
,,) echo "int x;" > "$dummy.c"
for driver in cc gcc c89 c99 ; do
if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
CC_FOR_BUILD=$driver
break
fi
done
if test x"$CC_FOR_BUILD" = x ; then
CC_FOR_BUILD=no_compiler_found
fi
;;
,,*) CC_FOR_BUILD=$CC ;;
,*,*) CC_FOR_BUILD=$HOST_CC ;;
esac
}
# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi@noc.rutgers.edu 1994-08-24)
if test -f /.attbin/uname ; then
PATH=$PATH:/.attbin ; export PATH
fi
UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
case $UNAME_SYSTEM in
Linux|GNU|GNU/*)
LIBC=unknown
set_cc_for_build
cat <<-EOF > "$dummy.c"
#include
#if defined(__UCLIBC__)
LIBC=uclibc
#elif defined(__dietlibc__)
LIBC=dietlibc
#elif defined(__GLIBC__)
LIBC=gnu
#else
#include
/* First heuristic to detect musl libc. */
#ifdef __DEFINED_va_list
LIBC=musl
#endif
#endif
EOF
cc_set_libc=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
eval "$cc_set_libc"
# Second heuristic to detect musl libc.
if [ "$LIBC" = unknown ] &&
command -v ldd >/dev/null &&
ldd --version 2>&1 | grep -q ^musl; then
LIBC=musl
fi
# If the system lacks a compiler, then just pick glibc.
# We could probably try harder.
if [ "$LIBC" = unknown ]; then
LIBC=gnu
fi
;;
esac
# Note: order is significant - the case branches are not exclusive.
case $UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION in
*:NetBSD:*:*)
# NetBSD (nbsd) targets should (where applicable) match one or
# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
# *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
# switched to ELF, *-*-netbsd* would select the old
# object file format. This provides both forward
# compatibility and a consistent mechanism for selecting the
# object file format.
#
# Note: NetBSD doesn't particularly care about the vendor
# portion of the name. We always set it to "unknown".
UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
/sbin/sysctl -n hw.machine_arch 2>/dev/null || \
/usr/sbin/sysctl -n hw.machine_arch 2>/dev/null || \
echo unknown)`
case $UNAME_MACHINE_ARCH in
aarch64eb) machine=aarch64_be-unknown ;;
armeb) machine=armeb-unknown ;;
arm*) machine=arm-unknown ;;
sh3el) machine=shl-unknown ;;
sh3eb) machine=sh-unknown ;;
sh5el) machine=sh5le-unknown ;;
earmv*)
arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'`
machine=${arch}${endian}-unknown
;;
*) machine=$UNAME_MACHINE_ARCH-unknown ;;
esac
# The Operating System including object format, if it has switched
# to ELF recently (or will in the future) and ABI.
case $UNAME_MACHINE_ARCH in
earm*)
os=netbsdelf
;;
arm*|i386|m68k|ns32k|sh3*|sparc|vax)
set_cc_for_build
if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ELF__
then
# Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
# Return netbsd for either. FIX?
os=netbsd
else
os=netbsdelf
fi
;;
*)
os=netbsd
;;
esac
# Determine ABI tags.
case $UNAME_MACHINE_ARCH in
earm*)
expr='s/^earmv[0-9]/-eabi/;s/eb$//'
abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"`
;;
esac
# The OS release
# Debian GNU/NetBSD machines have a different userland, and
# thus, need a distinct triplet. However, they do not need
# kernel version information, so it can be replaced with a
# suitable tag, in the style of linux-gnu.
case $UNAME_VERSION in
Debian*)
release='-gnu'
;;
*)
release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2`
;;
esac
# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
GUESS=$machine-${os}${release}${abi-}
;;
*:Bitrig:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
GUESS=$UNAME_MACHINE_ARCH-unknown-bitrig$UNAME_RELEASE
;;
*:OpenBSD:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
GUESS=$UNAME_MACHINE_ARCH-unknown-openbsd$UNAME_RELEASE
;;
*:SecBSD:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/SecBSD.//'`
GUESS=$UNAME_MACHINE_ARCH-unknown-secbsd$UNAME_RELEASE
;;
*:LibertyBSD:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
GUESS=$UNAME_MACHINE_ARCH-unknown-libertybsd$UNAME_RELEASE
;;
*:MidnightBSD:*:*)
GUESS=$UNAME_MACHINE-unknown-midnightbsd$UNAME_RELEASE
;;
*:ekkoBSD:*:*)
GUESS=$UNAME_MACHINE-unknown-ekkobsd$UNAME_RELEASE
;;
*:SolidBSD:*:*)
GUESS=$UNAME_MACHINE-unknown-solidbsd$UNAME_RELEASE
;;
*:OS108:*:*)
GUESS=$UNAME_MACHINE-unknown-os108_$UNAME_RELEASE
;;
macppc:MirBSD:*:*)
GUESS=powerpc-unknown-mirbsd$UNAME_RELEASE
;;
*:MirBSD:*:*)
GUESS=$UNAME_MACHINE-unknown-mirbsd$UNAME_RELEASE
;;
*:Sortix:*:*)
GUESS=$UNAME_MACHINE-unknown-sortix
;;
*:Twizzler:*:*)
GUESS=$UNAME_MACHINE-unknown-twizzler
;;
*:Redox:*:*)
GUESS=$UNAME_MACHINE-unknown-redox
;;
mips:OSF1:*.*)
GUESS=mips-dec-osf1
;;
alpha:OSF1:*:*)
# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
trap '' 0
case $UNAME_RELEASE in
*4.0)
UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
;;
*5.*)
UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
;;
esac
# According to Compaq, /usr/sbin/psrinfo has been available on
# OSF/1 and Tru64 systems produced since 1995. I hope that
# covers most systems running today. This code pipes the CPU
# types through head -n 1, so we only detect the type of CPU 0.
ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
case $ALPHA_CPU_TYPE in
"EV4 (21064)")
UNAME_MACHINE=alpha ;;
"EV4.5 (21064)")
UNAME_MACHINE=alpha ;;
"LCA4 (21066/21068)")
UNAME_MACHINE=alpha ;;
"EV5 (21164)")
UNAME_MACHINE=alphaev5 ;;
"EV5.6 (21164A)")
UNAME_MACHINE=alphaev56 ;;
"EV5.6 (21164PC)")
UNAME_MACHINE=alphapca56 ;;
"EV5.7 (21164PC)")
UNAME_MACHINE=alphapca57 ;;
"EV6 (21264)")
UNAME_MACHINE=alphaev6 ;;
"EV6.7 (21264A)")
UNAME_MACHINE=alphaev67 ;;
"EV6.8CB (21264C)")
UNAME_MACHINE=alphaev68 ;;
"EV6.8AL (21264B)")
UNAME_MACHINE=alphaev68 ;;
"EV6.8CX (21264D)")
UNAME_MACHINE=alphaev68 ;;
"EV6.9A (21264/EV69A)")
UNAME_MACHINE=alphaev69 ;;
"EV7 (21364)")
UNAME_MACHINE=alphaev7 ;;
"EV7.9 (21364A)")
UNAME_MACHINE=alphaev79 ;;
esac
# A Pn.n version is a patched version.
# A Vn.n version is a released version.
# A Tn.n version is a released field test version.
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
OSF_REL=`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
GUESS=$UNAME_MACHINE-dec-osf$OSF_REL
;;
Amiga*:UNIX_System_V:4.0:*)
GUESS=m68k-unknown-sysv4
;;
*:[Aa]miga[Oo][Ss]:*:*)
GUESS=$UNAME_MACHINE-unknown-amigaos
;;
*:[Mm]orph[Oo][Ss]:*:*)
GUESS=$UNAME_MACHINE-unknown-morphos
;;
*:OS/390:*:*)
GUESS=i370-ibm-openedition
;;
*:z/VM:*:*)
GUESS=s390-ibm-zvmoe
;;
*:OS400:*:*)
GUESS=powerpc-ibm-os400
;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
GUESS=arm-acorn-riscix$UNAME_RELEASE
;;
arm*:riscos:*:*|arm*:RISCOS:*:*)
GUESS=arm-unknown-riscos
;;
SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
GUESS=hppa1.1-hitachi-hiuxmpp
;;
Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
case `(/bin/universe) 2>/dev/null` in
att) GUESS=pyramid-pyramid-sysv3 ;;
*) GUESS=pyramid-pyramid-bsd ;;
esac
;;
NILE*:*:*:dcosx)
GUESS=pyramid-pyramid-svr4
;;
DRS?6000:unix:4.0:6*)
GUESS=sparc-icl-nx6
;;
DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
case `/usr/bin/uname -p` in
sparc) GUESS=sparc-icl-nx7 ;;
esac
;;
s390x:SunOS:*:*)
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=$UNAME_MACHINE-ibm-solaris2$SUN_REL
;;
sun4H:SunOS:5.*:*)
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=sparc-hal-solaris2$SUN_REL
;;
sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=sparc-sun-solaris2$SUN_REL
;;
i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
GUESS=i386-pc-auroraux$UNAME_RELEASE
;;
i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
set_cc_for_build
SUN_ARCH=i386
# If there is a compiler, see if it is configured for 64-bit objects.
# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
# This test works for both compilers.
if test "$CC_FOR_BUILD" != no_compiler_found; then
if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
(CCOPTS="" $CC_FOR_BUILD -m64 -E - 2>/dev/null) | \
grep IS_64BIT_ARCH >/dev/null
then
SUN_ARCH=x86_64
fi
fi
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=$SUN_ARCH-pc-solaris2$SUN_REL
;;
sun4*:SunOS:6*:*)
# According to config.sub, this is the proper way to canonicalize
# SunOS6. Hard to guess exactly what SunOS6 will be like, but
# it's likely to be more like Solaris than SunOS4.
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=sparc-sun-solaris3$SUN_REL
;;
sun4*:SunOS:*:*)
case `/usr/bin/arch -k` in
Series*|S4*)
UNAME_RELEASE=`uname -v`
;;
esac
# Japanese Language versions have a version number like '4.1.3-JL'.
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/-/_/'`
GUESS=sparc-sun-sunos$SUN_REL
;;
sun3*:SunOS:*:*)
GUESS=m68k-sun-sunos$UNAME_RELEASE
;;
sun*:*:4.2BSD:*)
UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3
case `/bin/arch` in
sun3)
GUESS=m68k-sun-sunos$UNAME_RELEASE
;;
sun4)
GUESS=sparc-sun-sunos$UNAME_RELEASE
;;
esac
;;
aushp:SunOS:*:*)
GUESS=sparc-auspex-sunos$UNAME_RELEASE
;;
# The situation for MiNT is a little confusing. The machine name
# can be virtually everything (everything which is not
# "atarist" or "atariste" at least should have a processor
# > m68000). The system name ranges from "MiNT" over "FreeMiNT"
# to the lowercase version "mint" (or "freemint"). Finally
# the system name "TOS" denotes a system which is actually not
# MiNT. But MiNT is downward compatible to TOS, so this should
# be no problem.
atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
GUESS=m68k-atari-mint$UNAME_RELEASE
;;
atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
GUESS=m68k-atari-mint$UNAME_RELEASE
;;
*falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
GUESS=m68k-atari-mint$UNAME_RELEASE
;;
milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
GUESS=m68k-milan-mint$UNAME_RELEASE
;;
hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
GUESS=m68k-hades-mint$UNAME_RELEASE
;;
*:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
GUESS=m68k-unknown-mint$UNAME_RELEASE
;;
m68k:machten:*:*)
GUESS=m68k-apple-machten$UNAME_RELEASE
;;
powerpc:machten:*:*)
GUESS=powerpc-apple-machten$UNAME_RELEASE
;;
RISC*:Mach:*:*)
GUESS=mips-dec-mach_bsd4.3
;;
RISC*:ULTRIX:*:*)
GUESS=mips-dec-ultrix$UNAME_RELEASE
;;
VAX*:ULTRIX*:*:*)
GUESS=vax-dec-ultrix$UNAME_RELEASE
;;
2020:CLIX:*:* | 2430:CLIX:*:*)
GUESS=clipper-intergraph-clix$UNAME_RELEASE
;;
mips:*:*:UMIPS | mips:*:*:RISCos)
set_cc_for_build
sed 's/^ //' << EOF > "$dummy.c"
#ifdef __cplusplus
#include /* for printf() prototype */
int main (int argc, char *argv[]) {
#else
int main (argc, argv) int argc; char *argv[]; {
#endif
#if defined (host_mips) && defined (MIPSEB)
#if defined (SYSTYPE_SYSV)
printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0);
#endif
#if defined (SYSTYPE_SVR4)
printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0);
#endif
#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0);
#endif
#endif
exit (-1);
}
EOF
$CC_FOR_BUILD -o "$dummy" "$dummy.c" &&
dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` &&
SYSTEM_NAME=`"$dummy" "$dummyarg"` &&
{ echo "$SYSTEM_NAME"; exit; }
GUESS=mips-mips-riscos$UNAME_RELEASE
;;
Motorola:PowerMAX_OS:*:*)
GUESS=powerpc-motorola-powermax
;;
Motorola:*:4.3:PL8-*)
GUESS=powerpc-harris-powermax
;;
Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
GUESS=powerpc-harris-powermax
;;
Night_Hawk:Power_UNIX:*:*)
GUESS=powerpc-harris-powerunix
;;
m88k:CX/UX:7*:*)
GUESS=m88k-harris-cxux7
;;
m88k:*:4*:R4*)
GUESS=m88k-motorola-sysv4
;;
m88k:*:3*:R3*)
GUESS=m88k-motorola-sysv3
;;
AViiON:dgux:*:*)
# DG/UX returns AViiON for all architectures
UNAME_PROCESSOR=`/usr/bin/uname -p`
if test "$UNAME_PROCESSOR" = mc88100 || test "$UNAME_PROCESSOR" = mc88110
then
if test "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx || \
test "$TARGET_BINARY_INTERFACE"x = x
then
GUESS=m88k-dg-dgux$UNAME_RELEASE
else
GUESS=m88k-dg-dguxbcs$UNAME_RELEASE
fi
else
GUESS=i586-dg-dgux$UNAME_RELEASE
fi
;;
M88*:DolphinOS:*:*) # DolphinOS (SVR3)
GUESS=m88k-dolphin-sysv3
;;
M88*:*:R3*:*)
# Delta 88k system running SVR3
GUESS=m88k-motorola-sysv3
;;
XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
GUESS=m88k-tektronix-sysv3
;;
Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
GUESS=m68k-tektronix-bsd
;;
*:IRIX*:*:*)
IRIX_REL=`echo "$UNAME_RELEASE" | sed -e 's/-/_/g'`
GUESS=mips-sgi-irix$IRIX_REL
;;
????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
GUESS=romp-ibm-aix # uname -m gives an 8 hex-code CPU id
;; # Note that: echo "'`uname -s`'" gives 'AIX '
i*86:AIX:*:*)
GUESS=i386-ibm-aix
;;
ia64:AIX:*:*)
if test -x /usr/bin/oslevel ; then
IBM_REV=`/usr/bin/oslevel`
else
IBM_REV=$UNAME_VERSION.$UNAME_RELEASE
fi
GUESS=$UNAME_MACHINE-ibm-aix$IBM_REV
;;
*:AIX:2:3)
if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
set_cc_for_build
sed 's/^ //' << EOF > "$dummy.c"
#include
main()
{
if (!__power_pc())
exit(1);
puts("powerpc-ibm-aix3.2.5");
exit(0);
}
EOF
if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"`
then
GUESS=$SYSTEM_NAME
else
GUESS=rs6000-ibm-aix3.2.5
fi
elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
GUESS=rs6000-ibm-aix3.2.4
else
GUESS=rs6000-ibm-aix3.2
fi
;;
*:AIX:*:[4567])
IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then
IBM_ARCH=rs6000
else
IBM_ARCH=powerpc
fi
if test -x /usr/bin/lslpp ; then
IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | \
awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
else
IBM_REV=$UNAME_VERSION.$UNAME_RELEASE
fi
GUESS=$IBM_ARCH-ibm-aix$IBM_REV
;;
*:AIX:*:*)
GUESS=rs6000-ibm-aix
;;
ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*)
GUESS=romp-ibm-bsd4.4
;;
ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
GUESS=romp-ibm-bsd$UNAME_RELEASE # 4.3 with uname added to
;; # report: romp-ibm BSD 4.3
*:BOSX:*:*)
GUESS=rs6000-bull-bosx
;;
DPX/2?00:B.O.S.:*:*)
GUESS=m68k-bull-sysv3
;;
9000/[34]??:4.3bsd:1.*:*)
GUESS=m68k-hp-bsd
;;
hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
GUESS=m68k-hp-bsd4.4
;;
9000/[34678]??:HP-UX:*:*)
HPUX_REV=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*.[0B]*//'`
case $UNAME_MACHINE in
9000/31?) HP_ARCH=m68000 ;;
9000/[34]??) HP_ARCH=m68k ;;
9000/[678][0-9][0-9])
if test -x /usr/bin/getconf; then
sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
case $sc_cpu_version in
523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
532) # CPU_PA_RISC2_0
case $sc_kernel_bits in
32) HP_ARCH=hppa2.0n ;;
64) HP_ARCH=hppa2.0w ;;
'') HP_ARCH=hppa2.0 ;; # HP-UX 10.20
esac ;;
esac
fi
if test "$HP_ARCH" = ""; then
set_cc_for_build
sed 's/^ //' << EOF > "$dummy.c"
#define _HPUX_SOURCE
#include
#include
int main ()
{
#if defined(_SC_KERNEL_BITS)
long bits = sysconf(_SC_KERNEL_BITS);
#endif
long cpu = sysconf (_SC_CPU_VERSION);
switch (cpu)
{
case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
case CPU_PA_RISC2_0:
#if defined(_SC_KERNEL_BITS)
switch (bits)
{
case 64: puts ("hppa2.0w"); break;
case 32: puts ("hppa2.0n"); break;
default: puts ("hppa2.0"); break;
} break;
#else /* !defined(_SC_KERNEL_BITS) */
puts ("hppa2.0"); break;
#endif
default: puts ("hppa1.0"); break;
}
exit (0);
}
EOF
(CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"`
test -z "$HP_ARCH" && HP_ARCH=hppa
fi ;;
esac
if test "$HP_ARCH" = hppa2.0w
then
set_cc_for_build
# hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
# 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
# generating 64-bit code. GNU and HP use different nomenclature:
#
# $ CC_FOR_BUILD=cc ./config.guess
# => hppa2.0w-hp-hpux11.23
# $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
# => hppa64-hp-hpux11.23
if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
grep -q __LP64__
then
HP_ARCH=hppa2.0w
else
HP_ARCH=hppa64
fi
fi
GUESS=$HP_ARCH-hp-hpux$HPUX_REV
;;
ia64:HP-UX:*:*)
HPUX_REV=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*.[0B]*//'`
GUESS=ia64-hp-hpux$HPUX_REV
;;
3050*:HI-UX:*:*)
set_cc_for_build
sed 's/^ //' << EOF > "$dummy.c"
#include
int
main ()
{
long cpu = sysconf (_SC_CPU_VERSION);
/* The order matters, because CPU_IS_HP_MC68K erroneously returns
true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
results, however. */
if (CPU_IS_PA_RISC (cpu))
{
switch (cpu)
{
case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
default: puts ("hppa-hitachi-hiuxwe2"); break;
}
}
else if (CPU_IS_HP_MC68K (cpu))
puts ("m68k-hitachi-hiuxwe2");
else puts ("unknown-hitachi-hiuxwe2");
exit (0);
}
EOF
$CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` &&
{ echo "$SYSTEM_NAME"; exit; }
GUESS=unknown-hitachi-hiuxwe2
;;
9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*)
GUESS=hppa1.1-hp-bsd
;;
9000/8??:4.3bsd:*:*)
GUESS=hppa1.0-hp-bsd
;;
*9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
GUESS=hppa1.0-hp-mpeix
;;
hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*)
GUESS=hppa1.1-hp-osf
;;
hp8??:OSF1:*:*)
GUESS=hppa1.0-hp-osf
;;
i*86:OSF1:*:*)
if test -x /usr/sbin/sysversion ; then
GUESS=$UNAME_MACHINE-unknown-osf1mk
else
GUESS=$UNAME_MACHINE-unknown-osf1
fi
;;
parisc*:Lites*:*:*)
GUESS=hppa1.1-hp-lites
;;
C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
GUESS=c1-convex-bsd
;;
C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
exit ;;
C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
GUESS=c34-convex-bsd
;;
C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
GUESS=c38-convex-bsd
;;
C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
GUESS=c4-convex-bsd
;;
CRAY*Y-MP:*:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=ymp-cray-unicos$CRAY_REL
;;
CRAY*[A-Z]90:*:*:*)
echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \
| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-e 's/\.[^.]*$/.X/'
exit ;;
CRAY*TS:*:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=t90-cray-unicos$CRAY_REL
;;
CRAY*T3E:*:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=alphaev5-cray-unicosmk$CRAY_REL
;;
CRAY*SV1:*:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=sv1-cray-unicos$CRAY_REL
;;
*:UNICOS/mp:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=craynv-cray-unicosmp$CRAY_REL
;;
F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'`
GUESS=${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}
;;
5000:UNIX_System_V:4.*:*)
FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
GUESS=sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}
;;
i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
GUESS=$UNAME_MACHINE-pc-bsdi$UNAME_RELEASE
;;
sparc*:BSD/OS:*:*)
GUESS=sparc-unknown-bsdi$UNAME_RELEASE
;;
*:BSD/OS:*:*)
GUESS=$UNAME_MACHINE-unknown-bsdi$UNAME_RELEASE
;;
arm:FreeBSD:*:*)
UNAME_PROCESSOR=`uname -p`
set_cc_for_build
if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_PCS_VFP
then
FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL-gnueabi
else
FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL-gnueabihf
fi
;;
*:FreeBSD:*:*)
UNAME_PROCESSOR=`/usr/bin/uname -p`
case $UNAME_PROCESSOR in
amd64)
UNAME_PROCESSOR=x86_64 ;;
i386)
UNAME_PROCESSOR=i586 ;;
esac
FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL
;;
i*:CYGWIN*:*)
GUESS=$UNAME_MACHINE-pc-cygwin
;;
*:MINGW64*:*)
GUESS=$UNAME_MACHINE-pc-mingw64
;;
*:MINGW*:*)
GUESS=$UNAME_MACHINE-pc-mingw32
;;
*:MSYS*:*)
GUESS=$UNAME_MACHINE-pc-msys
;;
i*:PW*:*)
GUESS=$UNAME_MACHINE-pc-pw32
;;
*:SerenityOS:*:*)
GUESS=$UNAME_MACHINE-pc-serenity
;;
*:Interix*:*)
case $UNAME_MACHINE in
x86)
GUESS=i586-pc-interix$UNAME_RELEASE
;;
authenticamd | genuineintel | EM64T)
GUESS=x86_64-unknown-interix$UNAME_RELEASE
;;
IA64)
GUESS=ia64-unknown-interix$UNAME_RELEASE
;;
esac ;;
i*:UWIN*:*)
GUESS=$UNAME_MACHINE-pc-uwin
;;
amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
GUESS=x86_64-pc-cygwin
;;
prep*:SunOS:5.*:*)
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=powerpcle-unknown-solaris2$SUN_REL
;;
*:GNU:*:*)
# the GNU system
GNU_ARCH=`echo "$UNAME_MACHINE" | sed -e 's,[-/].*$,,'`
GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's,/.*$,,'`
GUESS=$GNU_ARCH-unknown-$LIBC$GNU_REL
;;
*:GNU/*:*:*)
# other systems with GNU libc and userland
GNU_SYS=`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"`
GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_MACHINE-unknown-$GNU_SYS$GNU_REL-$LIBC
;;
x86_64:[Mm]anagarm:*:*|i?86:[Mm]anagarm:*:*)
GUESS="$UNAME_MACHINE-pc-managarm-mlibc"
;;
*:[Mm]anagarm:*:*)
GUESS="$UNAME_MACHINE-unknown-managarm-mlibc"
;;
*:Minix:*:*)
GUESS=$UNAME_MACHINE-unknown-minix
;;
aarch64:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
aarch64_be:Linux:*:*)
UNAME_MACHINE=aarch64_be
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
alpha:Linux:*:*)
case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' /proc/cpuinfo 2>/dev/null` in
EV5) UNAME_MACHINE=alphaev5 ;;
EV56) UNAME_MACHINE=alphaev56 ;;
PCA56) UNAME_MACHINE=alphapca56 ;;
PCA57) UNAME_MACHINE=alphapca56 ;;
EV6) UNAME_MACHINE=alphaev6 ;;
EV67) UNAME_MACHINE=alphaev67 ;;
EV68*) UNAME_MACHINE=alphaev68 ;;
esac
objdump --private-headers /bin/sh | grep -q ld.so.1
if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
arc:Linux:*:* | arceb:Linux:*:* | arc32:Linux:*:* | arc64:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
arm*:Linux:*:*)
set_cc_for_build
if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_EABI__
then
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
else
if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_PCS_VFP
then
GUESS=$UNAME_MACHINE-unknown-linux-${LIBC}eabi
else
GUESS=$UNAME_MACHINE-unknown-linux-${LIBC}eabihf
fi
fi
;;
avr32*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
cris:Linux:*:*)
GUESS=$UNAME_MACHINE-axis-linux-$LIBC
;;
crisv32:Linux:*:*)
GUESS=$UNAME_MACHINE-axis-linux-$LIBC
;;
e2k:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
frv:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
hexagon:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
i*86:Linux:*:*)
GUESS=$UNAME_MACHINE-pc-linux-$LIBC
;;
ia64:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
k1om:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
loongarch32:Linux:*:* | loongarch64:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
m32r*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
m68*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
mips:Linux:*:* | mips64:Linux:*:*)
set_cc_for_build
IS_GLIBC=0
test x"${LIBC}" = xgnu && IS_GLIBC=1
sed 's/^ //' << EOF > "$dummy.c"
#undef CPU
#undef mips
#undef mipsel
#undef mips64
#undef mips64el
#if ${IS_GLIBC} && defined(_ABI64)
LIBCABI=gnuabi64
#else
#if ${IS_GLIBC} && defined(_ABIN32)
LIBCABI=gnuabin32
#else
LIBCABI=${LIBC}
#endif
#endif
#if ${IS_GLIBC} && defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6
CPU=mipsisa64r6
#else
#if ${IS_GLIBC} && !defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6
CPU=mipsisa32r6
#else
#if defined(__mips64)
CPU=mips64
#else
CPU=mips
#endif
#endif
#endif
#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
MIPS_ENDIAN=el
#else
#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
MIPS_ENDIAN=
#else
MIPS_ENDIAN=
#endif
#endif
EOF
cc_set_vars=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU\|^MIPS_ENDIAN\|^LIBCABI'`
eval "$cc_set_vars"
test "x$CPU" != x && { echo "$CPU${MIPS_ENDIAN}-unknown-linux-$LIBCABI"; exit; }
;;
mips64el:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
openrisc*:Linux:*:*)
GUESS=or1k-unknown-linux-$LIBC
;;
or32:Linux:*:* | or1k*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
padre:Linux:*:*)
GUESS=sparc-unknown-linux-$LIBC
;;
parisc64:Linux:*:* | hppa64:Linux:*:*)
GUESS=hppa64-unknown-linux-$LIBC
;;
parisc:Linux:*:* | hppa:Linux:*:*)
# Look for CPU level
case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
PA7*) GUESS=hppa1.1-unknown-linux-$LIBC ;;
PA8*) GUESS=hppa2.0-unknown-linux-$LIBC ;;
*) GUESS=hppa-unknown-linux-$LIBC ;;
esac
;;
ppc64:Linux:*:*)
GUESS=powerpc64-unknown-linux-$LIBC
;;
ppc:Linux:*:*)
GUESS=powerpc-unknown-linux-$LIBC
;;
ppc64le:Linux:*:*)
GUESS=powerpc64le-unknown-linux-$LIBC
;;
ppcle:Linux:*:*)
GUESS=powerpcle-unknown-linux-$LIBC
;;
riscv32:Linux:*:* | riscv32be:Linux:*:* | riscv64:Linux:*:* | riscv64be:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
s390:Linux:*:* | s390x:Linux:*:*)
GUESS=$UNAME_MACHINE-ibm-linux-$LIBC
;;
sh64*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
sh*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
sparc:Linux:*:* | sparc64:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
tile*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
vax:Linux:*:*)
GUESS=$UNAME_MACHINE-dec-linux-$LIBC
;;
x86_64:Linux:*:*)
set_cc_for_build
CPU=$UNAME_MACHINE
LIBCABI=$LIBC
if test "$CC_FOR_BUILD" != no_compiler_found; then
ABI=64
sed 's/^ //' << EOF > "$dummy.c"
#ifdef __i386__
ABI=x86
#else
#ifdef __ILP32__
ABI=x32
#endif
#endif
EOF
cc_set_abi=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^ABI' | sed 's, ,,g'`
eval "$cc_set_abi"
case $ABI in
x86) CPU=i686 ;;
x32) LIBCABI=${LIBC}x32 ;;
esac
fi
GUESS=$CPU-pc-linux-$LIBCABI
;;
xtensa*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
i*86:DYNIX/ptx:4*:*)
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
# earlier versions are messed up and put the nodename in both
# sysname and nodename.
GUESS=i386-sequent-sysv4
;;
i*86:UNIX_SV:4.2MP:2.*)
# Unixware is an offshoot of SVR4, but it has its own version
# number series starting with 2...
# I am not positive that other SVR4 systems won't match this,
# I just have to hope. -- rms.
# Use sysv4.2uw... so that sysv4* matches it.
GUESS=$UNAME_MACHINE-pc-sysv4.2uw$UNAME_VERSION
;;
i*86:OS/2:*:*)
# If we were able to find 'uname', then EMX Unix compatibility
# is probably installed.
GUESS=$UNAME_MACHINE-pc-os2-emx
;;
i*86:XTS-300:*:STOP)
GUESS=$UNAME_MACHINE-unknown-stop
;;
i*86:atheos:*:*)
GUESS=$UNAME_MACHINE-unknown-atheos
;;
i*86:syllable:*:*)
GUESS=$UNAME_MACHINE-pc-syllable
;;
i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
GUESS=i386-unknown-lynxos$UNAME_RELEASE
;;
i*86:*DOS:*:*)
GUESS=$UNAME_MACHINE-pc-msdosdjgpp
;;
i*86:*:4.*:*)
UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'`
if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
GUESS=$UNAME_MACHINE-univel-sysv$UNAME_REL
else
GUESS=$UNAME_MACHINE-pc-sysv$UNAME_REL
fi
;;
i*86:*:5:[678]*)
# UnixWare 7.x, OpenUNIX and OpenServer 6.
case `/bin/uname -X | grep "^Machine"` in
*486*) UNAME_MACHINE=i486 ;;
*Pentium) UNAME_MACHINE=i586 ;;
*Pent*|*Celeron) UNAME_MACHINE=i686 ;;
esac
GUESS=$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
;;
i*86:*:3.2:*)
if test -f /usr/options/cb.name; then
UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then
UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
&& UNAME_MACHINE=i586
(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
&& UNAME_MACHINE=i686
(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
&& UNAME_MACHINE=i686
GUESS=$UNAME_MACHINE-pc-sco$UNAME_REL
else
GUESS=$UNAME_MACHINE-pc-sysv32
fi
;;
pc:*:*:*)
# Left here for compatibility:
# uname -m prints for DJGPP always 'pc', but it prints nothing about
# the processor, so we play safe by assuming i586.
# Note: whatever this is, it MUST be the same as what config.sub
# prints for the "djgpp" host, or else GDB configure will decide that
# this is a cross-build.
GUESS=i586-pc-msdosdjgpp
;;
Intel:Mach:3*:*)
GUESS=i386-pc-mach3
;;
paragon:*:*:*)
GUESS=i860-intel-osf1
;;
i860:*:4.*:*) # i860-SVR4
if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
GUESS=i860-stardent-sysv$UNAME_RELEASE # Stardent Vistra i860-SVR4
else # Add other i860-SVR4 vendors below as they are discovered.
GUESS=i860-unknown-sysv$UNAME_RELEASE # Unknown i860-SVR4
fi
;;
mini*:CTIX:SYS*5:*)
# "miniframe"
GUESS=m68010-convergent-sysv
;;
mc68k:UNIX:SYSTEM5:3.51m)
GUESS=m68k-convergent-sysv
;;
M680?0:D-NIX:5.3:*)
GUESS=m68k-diab-dnix
;;
M68*:*:R3V[5678]*:*)
test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
OS_REL=''
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
&& { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& { echo i486-ncr-sysv4; exit; } ;;
NCR*:*:4.2:* | MPRAS*:*:4.2:*)
OS_REL='.3'
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
&& { echo i586-ncr-sysv4.3"$OS_REL"; exit; }
/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
&& { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
GUESS=m68k-unknown-lynxos$UNAME_RELEASE
;;
mc68030:UNIX_System_V:4.*:*)
GUESS=m68k-atari-sysv4
;;
TSUNAMI:LynxOS:2.*:*)
GUESS=sparc-unknown-lynxos$UNAME_RELEASE
;;
rs6000:LynxOS:2.*:*)
GUESS=rs6000-unknown-lynxos$UNAME_RELEASE
;;
PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
GUESS=powerpc-unknown-lynxos$UNAME_RELEASE
;;
SM[BE]S:UNIX_SV:*:*)
GUESS=mips-dde-sysv$UNAME_RELEASE
;;
RM*:ReliantUNIX-*:*:*)
GUESS=mips-sni-sysv4
;;
RM*:SINIX-*:*:*)
GUESS=mips-sni-sysv4
;;
*:SINIX-*:*:*)
if uname -p 2>/dev/null >/dev/null ; then
UNAME_MACHINE=`(uname -p) 2>/dev/null`
GUESS=$UNAME_MACHINE-sni-sysv4
else
GUESS=ns32k-sni-sysv
fi
;;
PENTIUM:*:4.0*:*) # Unisys 'ClearPath HMP IX 4000' SVR4/MP effort
# says
GUESS=i586-unisys-sysv4
;;
*:UNIX_System_V:4*:FTX*)
# From Gerald Hewes .
# How about differentiating between stratus architectures? -djm
GUESS=hppa1.1-stratus-sysv4
;;
*:*:*:FTX*)
# From seanf@swdc.stratus.com.
GUESS=i860-stratus-sysv4
;;
i*86:VOS:*:*)
# From Paul.Green@stratus.com.
GUESS=$UNAME_MACHINE-stratus-vos
;;
*:VOS:*:*)
# From Paul.Green@stratus.com.
GUESS=hppa1.1-stratus-vos
;;
mc68*:A/UX:*:*)
GUESS=m68k-apple-aux$UNAME_RELEASE
;;
news*:NEWS-OS:6*:*)
GUESS=mips-sony-newsos6
;;
R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
if test -d /usr/nec; then
GUESS=mips-nec-sysv$UNAME_RELEASE
else
GUESS=mips-unknown-sysv$UNAME_RELEASE
fi
;;
BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
GUESS=powerpc-be-beos
;;
BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
GUESS=powerpc-apple-beos
;;
BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
GUESS=i586-pc-beos
;;
BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
GUESS=i586-pc-haiku
;;
ppc:Haiku:*:*) # Haiku running on Apple PowerPC
GUESS=powerpc-apple-haiku
;;
*:Haiku:*:*) # Haiku modern gcc (not bound by BeOS compat)
GUESS=$UNAME_MACHINE-unknown-haiku
;;
SX-4:SUPER-UX:*:*)
GUESS=sx4-nec-superux$UNAME_RELEASE
;;
SX-5:SUPER-UX:*:*)
GUESS=sx5-nec-superux$UNAME_RELEASE
;;
SX-6:SUPER-UX:*:*)
GUESS=sx6-nec-superux$UNAME_RELEASE
;;
SX-7:SUPER-UX:*:*)
GUESS=sx7-nec-superux$UNAME_RELEASE
;;
SX-8:SUPER-UX:*:*)
GUESS=sx8-nec-superux$UNAME_RELEASE
;;
SX-8R:SUPER-UX:*:*)
GUESS=sx8r-nec-superux$UNAME_RELEASE
;;
SX-ACE:SUPER-UX:*:*)
GUESS=sxace-nec-superux$UNAME_RELEASE
;;
Power*:Rhapsody:*:*)
GUESS=powerpc-apple-rhapsody$UNAME_RELEASE
;;
*:Rhapsody:*:*)
GUESS=$UNAME_MACHINE-apple-rhapsody$UNAME_RELEASE
;;
arm64:Darwin:*:*)
GUESS=aarch64-apple-darwin$UNAME_RELEASE
;;
*:Darwin:*:*)
UNAME_PROCESSOR=`uname -p`
case $UNAME_PROCESSOR in
unknown) UNAME_PROCESSOR=powerpc ;;
esac
if command -v xcode-select > /dev/null 2> /dev/null && \
! xcode-select --print-path > /dev/null 2> /dev/null ; then
# Avoid executing cc if there is no toolchain installed as
# cc will be a stub that puts up a graphical alert
# prompting the user to install developer tools.
CC_FOR_BUILD=no_compiler_found
else
set_cc_for_build
fi
if test "$CC_FOR_BUILD" != no_compiler_found; then
if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
grep IS_64BIT_ARCH >/dev/null
then
case $UNAME_PROCESSOR in
i386) UNAME_PROCESSOR=x86_64 ;;
powerpc) UNAME_PROCESSOR=powerpc64 ;;
esac
fi
# On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc
if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \
(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
grep IS_PPC >/dev/null
then
UNAME_PROCESSOR=powerpc
fi
elif test "$UNAME_PROCESSOR" = i386 ; then
# uname -m returns i386 or x86_64
UNAME_PROCESSOR=$UNAME_MACHINE
fi
GUESS=$UNAME_PROCESSOR-apple-darwin$UNAME_RELEASE
;;
*:procnto*:*:* | *:QNX:[0123456789]*:*)
UNAME_PROCESSOR=`uname -p`
if test "$UNAME_PROCESSOR" = x86; then
UNAME_PROCESSOR=i386
UNAME_MACHINE=pc
fi
GUESS=$UNAME_PROCESSOR-$UNAME_MACHINE-nto-qnx$UNAME_RELEASE
;;
*:QNX:*:4*)
GUESS=i386-pc-qnx
;;
NEO-*:NONSTOP_KERNEL:*:*)
GUESS=neo-tandem-nsk$UNAME_RELEASE
;;
NSE-*:NONSTOP_KERNEL:*:*)
GUESS=nse-tandem-nsk$UNAME_RELEASE
;;
NSR-*:NONSTOP_KERNEL:*:*)
GUESS=nsr-tandem-nsk$UNAME_RELEASE
;;
NSV-*:NONSTOP_KERNEL:*:*)
GUESS=nsv-tandem-nsk$UNAME_RELEASE
;;
NSX-*:NONSTOP_KERNEL:*:*)
GUESS=nsx-tandem-nsk$UNAME_RELEASE
;;
*:NonStop-UX:*:*)
GUESS=mips-compaq-nonstopux
;;
BS2000:POSIX*:*:*)
GUESS=bs2000-siemens-sysv
;;
DS/*:UNIX_System_V:*:*)
GUESS=$UNAME_MACHINE-$UNAME_SYSTEM-$UNAME_RELEASE
;;
*:Plan9:*:*)
# "uname -m" is not consistent, so use $cputype instead. 386
# is converted to i386 for consistency with other x86
# operating systems.
if test "${cputype-}" = 386; then
UNAME_MACHINE=i386
elif test "x${cputype-}" != x; then
UNAME_MACHINE=$cputype
fi
GUESS=$UNAME_MACHINE-unknown-plan9
;;
*:TOPS-10:*:*)
GUESS=pdp10-unknown-tops10
;;
*:TENEX:*:*)
GUESS=pdp10-unknown-tenex
;;
KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
GUESS=pdp10-dec-tops20
;;
XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
GUESS=pdp10-xkl-tops20
;;
*:TOPS-20:*:*)
GUESS=pdp10-unknown-tops20
;;
*:ITS:*:*)
GUESS=pdp10-unknown-its
;;
SEI:*:*:SEIUX)
GUESS=mips-sei-seiux$UNAME_RELEASE
;;
*:DragonFly:*:*)
DRAGONFLY_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_MACHINE-unknown-dragonfly$DRAGONFLY_REL
;;
*:*VMS:*:*)
UNAME_MACHINE=`(uname -p) 2>/dev/null`
case $UNAME_MACHINE in
A*) GUESS=alpha-dec-vms ;;
I*) GUESS=ia64-dec-vms ;;
V*) GUESS=vax-dec-vms ;;
esac ;;
*:XENIX:*:SysV)
GUESS=i386-pc-xenix
;;
i*86:skyos:*:*)
SKYOS_REL=`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`
GUESS=$UNAME_MACHINE-pc-skyos$SKYOS_REL
;;
i*86:rdos:*:*)
GUESS=$UNAME_MACHINE-pc-rdos
;;
i*86:Fiwix:*:*)
GUESS=$UNAME_MACHINE-pc-fiwix
;;
*:AROS:*:*)
GUESS=$UNAME_MACHINE-unknown-aros
;;
x86_64:VMkernel:*:*)
GUESS=$UNAME_MACHINE-unknown-esx
;;
amd64:Isilon\ OneFS:*:*)
GUESS=x86_64-unknown-onefs
;;
*:Unleashed:*:*)
GUESS=$UNAME_MACHINE-unknown-unleashed$UNAME_RELEASE
;;
esac
# Do we have a guess based on uname results?
if test "x$GUESS" != x; then
echo "$GUESS"
exit
fi
# No uname command or uname output not recognized.
set_cc_for_build
cat > "$dummy.c" <
#include
#endif
#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__)
#if defined (vax) || defined (__vax) || defined (__vax__) || defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__)
#include
#if defined(_SIZE_T_) || defined(SIGLOST)
#include
#endif
#endif
#endif
main ()
{
#if defined (sony)
#if defined (MIPSEB)
/* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
I don't know.... */
printf ("mips-sony-bsd\n"); exit (0);
#else
#include
printf ("m68k-sony-newsos%s\n",
#ifdef NEWSOS4
"4"
#else
""
#endif
); exit (0);
#endif
#endif
#if defined (NeXT)
#if !defined (__ARCHITECTURE__)
#define __ARCHITECTURE__ "m68k"
#endif
int version;
version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
if (version < 4)
printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
else
printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
exit (0);
#endif
#if defined (MULTIMAX) || defined (n16)
#if defined (UMAXV)
printf ("ns32k-encore-sysv\n"); exit (0);
#else
#if defined (CMU)
printf ("ns32k-encore-mach\n"); exit (0);
#else
printf ("ns32k-encore-bsd\n"); exit (0);
#endif
#endif
#endif
#if defined (__386BSD__)
printf ("i386-pc-bsd\n"); exit (0);
#endif
#if defined (sequent)
#if defined (i386)
printf ("i386-sequent-dynix\n"); exit (0);
#endif
#if defined (ns32000)
printf ("ns32k-sequent-dynix\n"); exit (0);
#endif
#endif
#if defined (_SEQUENT_)
struct utsname un;
uname(&un);
if (strncmp(un.version, "V2", 2) == 0) {
printf ("i386-sequent-ptx2\n"); exit (0);
}
if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
printf ("i386-sequent-ptx1\n"); exit (0);
}
printf ("i386-sequent-ptx\n"); exit (0);
#endif
#if defined (vax)
#if !defined (ultrix)
#include
#if defined (BSD)
#if BSD == 43
printf ("vax-dec-bsd4.3\n"); exit (0);
#else
#if BSD == 199006
printf ("vax-dec-bsd4.3reno\n"); exit (0);
#else
printf ("vax-dec-bsd\n"); exit (0);
#endif
#endif
#else
printf ("vax-dec-bsd\n"); exit (0);
#endif
#else
#if defined(_SIZE_T_) || defined(SIGLOST)
struct utsname un;
uname (&un);
printf ("vax-dec-ultrix%s\n", un.release); exit (0);
#else
printf ("vax-dec-ultrix\n"); exit (0);
#endif
#endif
#endif
#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__)
#if defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__)
#if defined(_SIZE_T_) || defined(SIGLOST)
struct utsname *un;
uname (&un);
printf ("mips-dec-ultrix%s\n", un.release); exit (0);
#else
printf ("mips-dec-ultrix\n"); exit (0);
#endif
#endif
#endif
#if defined (alliant) && defined (i860)
printf ("i860-alliant-bsd\n"); exit (0);
#endif
exit (1);
}
EOF
$CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null && SYSTEM_NAME=`"$dummy"` &&
{ echo "$SYSTEM_NAME"; exit; }
# Apollos put the system type in the environment.
test -d /usr/apollo && { echo "$ISP-apollo-$SYSTYPE"; exit; }
echo "$0: unable to guess system type" >&2
case $UNAME_MACHINE:$UNAME_SYSTEM in
mips:Linux | mips64:Linux)
# If we got here on MIPS GNU/Linux, output extra information.
cat >&2 <&2 <&2 </dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`
/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
hostinfo = `(hostinfo) 2>/dev/null`
/bin/universe = `(/bin/universe) 2>/dev/null`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
/bin/arch = `(/bin/arch) 2>/dev/null`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
UNAME_MACHINE = "$UNAME_MACHINE"
UNAME_RELEASE = "$UNAME_RELEASE"
UNAME_SYSTEM = "$UNAME_SYSTEM"
UNAME_VERSION = "$UNAME_VERSION"
EOF
fi
exit 1
# Local variables:
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
# End:
lcmaps-plugins-jobrep-1.5.7/configure 0000755 0001750 0000144 00001660661 14574774131 014622 0000000 0000000 #! /bin/sh
# From configure.ac Revision: 1.11 .
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.71 for LCMAPS plugins jobrep 1.5.7.
#
#
# Copyright (C) 1992-1996, 1998-2017, 2020-2021 Free Software Foundation,
# Inc.
#
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
#
# Copyright (c) 2013 The IGE Project
# See LICENCE file for details
#
## -------------------- ##
## M4sh Initialization. ##
## -------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
as_nop=:
if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else $as_nop
case `(set -o) 2>/dev/null` in #(
*posix*) :
set -o posix ;; #(
*) :
;;
esac
fi
# Reset variables that may have inherited troublesome values from
# the environment.
# IFS needs to be set, to space, tab, and newline, in precisely that order.
# (If _AS_PATH_WALK were called with IFS unset, it would have the
# side effect of setting IFS to empty, thus disabling word splitting.)
# Quoting is to prevent editors from complaining about space-tab.
as_nl='
'
export as_nl
IFS=" "" $as_nl"
PS1='$ '
PS2='> '
PS4='+ '
# Ensure predictable behavior from utilities with locale-dependent output.
LC_ALL=C
export LC_ALL
LANGUAGE=C
export LANGUAGE
# We cannot yet rely on "unset" to work, but we need these variables
# to be unset--not just set to an empty or harmless value--now, to
# avoid bugs in old shells (e.g. pre-3.0 UWIN ksh). This construct
# also avoids known problems related to "unset" and subshell syntax
# in other old shells (e.g. bash 2.01 and pdksh 5.2.14).
for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH
do eval test \${$as_var+y} \
&& ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
# Ensure that fds 0, 1, and 2 are open.
if (exec 3>&0) 2>/dev/null; then :; else exec 0&1) 2>/dev/null; then :; else exec 1>/dev/null; fi
if (exec 3>&2) ; then :; else exec 2>/dev/null; fi
# The user is always right.
if ${PATH_SEPARATOR+false} :; then
PATH_SEPARATOR=:
(PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
(PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
PATH_SEPARATOR=';'
}
fi
# Find who we are. Look in the path if we contain no directory separator.
as_myself=
case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
test -r "$as_dir$0" && as_myself=$as_dir$0 && break
done
IFS=$as_save_IFS
;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
as_myself=$0
fi
if test ! -f "$as_myself"; then
printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
exit 1
fi
# Use a proper internal environment variable to ensure we don't fall
# into an infinite loop, continuously re-executing ourselves.
if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
_as_can_reexec=no; export _as_can_reexec;
# We cannot yet assume a decent shell, so we have to provide a
# neutralization value for shells without unset; and this also
# works around shells that cannot unset nonexistent variables.
# Preserve -v and -x to the replacement shell.
BASH_ENV=/dev/null
ENV=/dev/null
(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
case $- in # ((((
*v*x* | *x*v* ) as_opts=-vx ;;
*v* ) as_opts=-v ;;
*x* ) as_opts=-x ;;
* ) as_opts= ;;
esac
exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
# Admittedly, this is quite paranoid, since all the known shells bail
# out after a failed `exec'.
printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
exit 255
fi
# We don't want this to propagate to other subprocesses.
{ _as_can_reexec=; unset _as_can_reexec;}
if test "x$CONFIG_SHELL" = x; then
as_bourne_compatible="as_nop=:
if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
# is contrary to our usage. Disable this feature.
alias -g '\${1+\"\$@\"}'='\"\$@\"'
setopt NO_GLOB_SUBST
else \$as_nop
case \`(set -o) 2>/dev/null\` in #(
*posix*) :
set -o posix ;; #(
*) :
;;
esac
fi
"
as_required="as_fn_return () { (exit \$1); }
as_fn_success () { as_fn_return 0; }
as_fn_failure () { as_fn_return 1; }
as_fn_ret_success () { return 0; }
as_fn_ret_failure () { return 1; }
exitcode=0
as_fn_success || { exitcode=1; echo as_fn_success failed.; }
as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
if ( set x; as_fn_ret_success y && test x = \"\$1\" )
then :
else \$as_nop
exitcode=1; echo positional parameters were not saved.
fi
test x\$exitcode = x0 || exit 1
blah=\$(echo \$(echo blah))
test x\"\$blah\" = xblah || exit 1
test -x / || exit 1"
as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
PATH=/empty FPATH=/empty; export PATH FPATH
test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
|| test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
test \$(( 1 + 1 )) = 2 || exit 1"
if (eval "$as_required") 2>/dev/null
then :
as_have_required=yes
else $as_nop
as_have_required=no
fi
if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null
then :
else $as_nop
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
as_found=false
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
IFS=$as_save_IFS
case $as_dir in #(((
'') as_dir=./ ;;
*/) ;;
*) as_dir=$as_dir/ ;;
esac
as_found=:
case $as_dir in #(
/*)
for as_base in sh bash ksh sh5; do
# Try only shells that exist, to save several forks.
as_shell=$as_dir$as_base
if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
as_run=a "$as_shell" -c "$as_bourne_compatible""$as_required" 2>/dev/null
then :
CONFIG_SHELL=$as_shell as_have_required=yes
if as_run=a "$as_shell" -c "$as_bourne_compatible""$as_suggested" 2>/dev/null
then :
break 2
fi
fi
done;;
esac
as_found=false
done
IFS=$as_save_IFS
if $as_found
then :
else $as_nop
if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
as_run=a "$SHELL" -c "$as_bourne_compatible""$as_required" 2>/dev/null
then :
CONFIG_SHELL=$SHELL as_have_required=yes
fi
fi
if test "x$CONFIG_SHELL" != x
then :
export CONFIG_SHELL
# We cannot yet assume a decent shell, so we have to provide a
# neutralization value for shells without unset; and this also
# works around shells that cannot unset nonexistent variables.
# Preserve -v and -x to the replacement shell.
BASH_ENV=/dev/null
ENV=/dev/null
(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
case $- in # ((((
*v*x* | *x*v* ) as_opts=-vx ;;
*v* ) as_opts=-v ;;
*x* ) as_opts=-x ;;
* ) as_opts= ;;
esac
exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
# Admittedly, this is quite paranoid, since all the known shells bail
# out after a failed `exec'.
printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
exit 255
fi
if test x$as_have_required = xno
then :
printf "%s\n" "$0: This script requires a shell more modern than all"
printf "%s\n" "$0: the shells that I found on your system."
if test ${ZSH_VERSION+y} ; then
printf "%s\n" "$0: In particular, zsh $ZSH_VERSION has bugs and should"
printf "%s\n" "$0: be upgraded to zsh 4.3.4 or later."
else
printf "%s\n" "$0: Please tell bug-autoconf@gnu.org about your system,
$0: including any error possibly output before this
$0: message. Then install a modern shell, or manually run
$0: the script under such a shell if you do have one."
fi
exit 1
fi
fi
fi
SHELL=${CONFIG_SHELL-/bin/sh}
export SHELL
# Unset more variables known to interfere with behavior of common tools.
CLICOLOR_FORCE= GREP_OPTIONS=
unset CLICOLOR_FORCE GREP_OPTIONS
## --------------------- ##
## M4sh Shell Functions. ##
## --------------------- ##
# as_fn_unset VAR
# ---------------
# Portably unset VAR.
as_fn_unset ()
{
{ eval $1=; unset $1;}
}
as_unset=as_fn_unset
# as_fn_set_status STATUS
# -----------------------
# Set $? to STATUS, without forking.
as_fn_set_status ()
{
return $1
} # as_fn_set_status
# as_fn_exit STATUS
# -----------------
# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
as_fn_exit ()
{
set +e
as_fn_set_status $1
exit $1
} # as_fn_exit
# as_fn_nop
# ---------
# Do nothing but, unlike ":", preserve the value of $?.
as_fn_nop ()
{
return $?
}
as_nop=as_fn_nop
# as_fn_mkdir_p
# -------------
# Create "$as_dir" as a directory, including parents if necessary.
as_fn_mkdir_p ()
{
case $as_dir in #(
-*) as_dir=./$as_dir;;
esac
test -d "$as_dir" || eval $as_mkdir_p || {
as_dirs=
while :; do
case $as_dir in #(
*\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
*) as_qdir=$as_dir;;
esac
as_dirs="'$as_qdir' $as_dirs"
as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
printf "%s\n" X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
} || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
} # as_fn_mkdir_p
# as_fn_executable_p FILE
# -----------------------
# Test if FILE is an executable regular file.
as_fn_executable_p ()
{
test -f "$1" && test -x "$1"
} # as_fn_executable_p
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
# advantage of any shell optimizations that allow amortized linear growth over
# repeated appends, instead of the typical quadratic growth present in naive
# implementations.
if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null
then :
eval 'as_fn_append ()
{
eval $1+=\$2
}'
else $as_nop
as_fn_append ()
{
eval $1=\$$1\$2
}
fi # as_fn_append
# as_fn_arith ARG...
# ------------------
# Perform arithmetic evaluation on the ARGs, and store the result in the
# global $as_val. Take advantage of shells that can avoid forks. The arguments
# must be portable across $(()) and expr.
if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null
then :
eval 'as_fn_arith ()
{
as_val=$(( $* ))
}'
else $as_nop
as_fn_arith ()
{
as_val=`expr "$@" || test $? -eq 1`
}
fi # as_fn_arith
# as_fn_nop
# ---------
# Do nothing but, unlike ":", preserve the value of $?.
as_fn_nop ()
{
return $?
}
as_nop=as_fn_nop
# as_fn_error STATUS ERROR [LINENO LOG_FD]
# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
as_status=$1; test $as_status -eq 0 && as_status=1
if test "$4"; then
as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
printf "%s\n" "$as_me: error: $2" >&2
as_fn_exit $as_status
} # as_fn_error
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
fi
if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
as_dirname=dirname
else
as_dirname=false
fi
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
printf "%s\n" X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
}
/^X\/\(\/\/\)$/{
s//\1/
q
}
/^X\/\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
as_lineno_1=$LINENO as_lineno_1a=$LINENO
as_lineno_2=$LINENO as_lineno_2a=$LINENO
eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
# Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
sed -n '
p
/[$]LINENO/=
' <$as_myself |
sed '
s/[$]LINENO.*/&-/
t lineno
b
:lineno
N
:loop
s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
t loop
s/-\n.*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
{ printf "%s\n" "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
# If we had to re-execute with $CONFIG_SHELL, we're ensured to have
# already done that, so ensure we don't try to do so again and fall
# in an infinite loop. This has already happened in practice.
_as_can_reexec=no; export _as_can_reexec
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to this).
. "./$as_me.lineno"
# Exit status is that of the last command.
exit
}
# Determine whether it's possible to make 'echo' print without a newline.
# These variables are no longer used directly by Autoconf, but are AC_SUBSTed
# for compatibility with existing Makefiles.
ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in #(((((
-n*)
case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
xy) ECHO_C='\c';;
*) echo `echo ksh88 bug on AIX 6.1` > /dev/null
ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
# For backward compatibility with old third-party macros, we provide
# the shell variables $as_echo and $as_echo_n. New code should use
# AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively.
as_echo='printf %s\n'
as_echo_n='printf %s'
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
mkdir conf$$.dir 2>/dev/null
fi
if (echo >conf$$.file) 2>/dev/null; then
if ln -s conf$$.file conf$$ 2>/dev/null; then
as_ln_s='ln -s'
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
# In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -pR'
fi
else
as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
as_test_x='test -x'
as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
SHELL=${CONFIG_SHELL-/bin/sh}
test -n "$DJDIR" || exec 7<&0 &1
# Name of the host.
# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
#
# Initializations.
#
ac_default_prefix=/usr/local
ac_clean_files=
ac_config_libobj_dir=.
LIBOBJS=
cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=
# Identity of this package.
PACKAGE_NAME='LCMAPS plugins jobrep'
PACKAGE_TARNAME='lcmaps-plugins-jobrep'
PACKAGE_VERSION='1.5.7'
PACKAGE_STRING='LCMAPS plugins jobrep 1.5.7'
PACKAGE_BUGREPORT=''
PACKAGE_URL=''
ac_unique_file="src/lcmaps_jobrep_config.h.in"
# Factoring default headers for most tests.
ac_includes_default="\
#include