lightdm-gtk-greeter-2.0.5/0000775000175000017500000000000013253545066017371 5ustar00bluesabrebluesabre00000000000000lightdm-gtk-greeter-2.0.5/ABOUT-NLS0000644000175000017500000026774113243246351020631 0ustar00bluesabrebluesabre000000000000001 Notes on the Free Translation Project *************************************** Free software is going international! The Free Translation Project is a way to get maintainers of free software, translators, and users all together, so that free software will gradually become able to speak many languages. A few packages already provide translations for their messages. If you found this 'ABOUT-NLS' file inside a distribution, you may assume that the distributed package does use GNU 'gettext' internally, itself available at your nearest GNU archive site. But you do _not_ need to install GNU 'gettext' prior to configuring, installing or using this package with messages translated. Installers will find here some useful hints. These notes also explain how users should proceed for getting the programs to use the available translations. They tell how people wanting to contribute and work on translations can contact the appropriate team. 1.1 INSTALL Matters =================== Some packages are "localizable" when properly installed; the programs they contain can be made to speak your own native language. Most such packages use GNU 'gettext'. Other packages have their own ways to internationalization, predating GNU 'gettext'. By default, this package will be installed to allow translation of messages. It will automatically detect whether the system already provides the GNU 'gettext' functions. Installers may use special options at configuration time for changing the default behaviour. The command: ./configure --disable-nls will _totally_ disable translation of messages. When you already have GNU 'gettext' installed on your system and run configure without an option for your new package, 'configure' will probably detect the previously built and installed 'libintl' library and will decide to use it. If not, you may have to to use the '--with-libintl-prefix' option to tell 'configure' where to look for it. Internationalized packages usually have many 'po/LL.po' files, where LL gives an ISO 639 two-letter code identifying the language. Unless translations have been forbidden at 'configure' time by using the '--disable-nls' switch, all available translations are installed together with the package. However, the environment variable 'LINGUAS' may be set, prior to configuration, to limit the installed set. 'LINGUAS' should then contain a space separated list of two-letter codes, stating which languages are allowed. 1.2 Using This Package ====================== As a user, if your language has been installed for this package, you only have to set the 'LANG' environment variable to the appropriate 'LL_CC' combination. If you happen to have the 'LC_ALL' or some other 'LC_xxx' environment variables set, you should unset them before setting 'LANG', otherwise the setting of 'LANG' will not have the desired effect. Here 'LL' is an ISO 639 two-letter language code, and 'CC' is an ISO 3166 two-letter country code. For example, let's suppose that you speak German and live in Germany. At the shell prompt, merely execute 'setenv LANG de_DE' (in 'csh'), 'export LANG; LANG=de_DE' (in 'sh') or 'export LANG=de_DE' (in 'bash'). This can be done from your '.login' or '.profile' file, once and for all. You might think that the country code specification is redundant. But in fact, some languages have dialects in different countries. For example, 'de_AT' is used for Austria, and 'pt_BR' for Brazil. The country code serves to distinguish the dialects. The locale naming convention of 'LL_CC', with 'LL' denoting the language and 'CC' denoting the country, is the one use on systems based on GNU libc. On other systems, some variations of this scheme are used, such as 'LL' or 'LL_CC.ENCODING'. You can get the list of locales supported by your system for your language by running the command 'locale -a | grep '^LL''. Not all programs have translations for all languages. By default, an English message is shown in place of a nonexistent translation. If you understand other languages, you can set up a priority list of languages. This is done through a different environment variable, called 'LANGUAGE'. GNU 'gettext' gives preference to 'LANGUAGE' over 'LANG' for the purpose of message handling, but you still need to have 'LANG' set to the primary language; this is required by other parts of the system libraries. For example, some Swedish users who would rather read translations in German than English for when Swedish is not available, set 'LANGUAGE' to 'sv:de' while leaving 'LANG' to 'sv_SE'. Special advice for Norwegian users: The language code for Norwegian bokma*l changed from 'no' to 'nb' recently (in 2003). During the transition period, while some message catalogs for this language are installed under 'nb' and some older ones under 'no', it's recommended for Norwegian users to set 'LANGUAGE' to 'nb:no' so that both newer and older translations are used. In the 'LANGUAGE' environment variable, but not in the 'LANG' environment variable, 'LL_CC' combinations can be abbreviated as 'LL' to denote the language's main dialect. For example, 'de' is equivalent to 'de_DE' (German as spoken in Germany), and 'pt' to 'pt_PT' (Portuguese as spoken in Portugal) in this context. 1.3 Translating Teams ===================== For the Free Translation Project to be a success, we need interested people who like their own language and write it well, and who are also able to synergize with other translators speaking the same language. Each translation team has its own mailing list. The up-to-date list of teams can be found at the Free Translation Project's homepage, 'http://translationproject.org/', in the "Teams" area. If you'd like to volunteer to _work_ at translating messages, you should become a member of the translating team for your own language. The subscribing address is _not_ the same as the list itself, it has '-request' appended. For example, speakers of Swedish can send a message to 'sv-request@li.org', having this message body: subscribe Keep in mind that team members are expected to participate _actively_ in translations, or at solving translational difficulties, rather than merely lurking around. If your team does not exist yet and you want to start one, or if you are unsure about what to do or how to get started, please write to 'coordinator@translationproject.org' to reach the coordinator for all translator teams. The English team is special. It works at improving and uniformizing the terminology in use. Proven linguistic skills are praised more than programming skills, here. 1.4 Available Packages ====================== Languages are not equally supported in all packages. The following matrix shows the current state of internationalization, as of Jun 2014. The matrix shows, in regard of each package, for which languages PO files have been submitted to translation coordination, with a translation percentage of at least 50%. Ready PO files af am an ar as ast az be bg bn bn_IN bs ca crh cs +---------------------------------------------------+ a2ps | [] [] [] | aegis | | anubis | | aspell | [] [] [] | bash | [] [] [] | bfd | | binutils | [] | bison | | bison-runtime | [] | buzztrax | [] | ccd2cue | | ccide | | cflow | | clisp | | coreutils | [] [] | cpio | | cppi | | cpplib | [] | cryptsetup | [] | datamash | | denemo | [] [] | dfarc | [] | dialog | [] [] [] | dico | | diffutils | [] | dink | [] | direvent | | doodle | [] | dos2unix | | dos2unix-man | | e2fsprogs | [] [] | enscript | [] | exif | [] | fetchmail | [] [] | findutils | [] | flex | [] | freedink | [] [] | fusionforge | | gas | | gawk | [] | gcal | [] | gcc | | gdbm | | gettext-examples | [] [] [] [] [] | gettext-runtime | [] [] [] | gettext-tools | [] [] | gjay | | glunarclock | [] [] [] | gnubiff | [] | gnubik | [] | gnucash | () () [] | gnuchess | | gnulib | [] | gnunet | | gnunet-gtk | | gold | | gphoto2 | [] | gprof | [] | gramadoir | | grep | [] [] [] | grub | [] | gsasl | | gss | | gst-plugins-bad | [] | gst-plugins-base | [] [] [] | gst-plugins-good | [] [] [] | gst-plugins-ugly | [] [] [] | gstreamer | [] [] [] [] | gtick | [] | gtkam | [] [] | gtkspell | [] [] [] [] [] | guix | | guix-packages | | gutenprint | [] | hello | [] | help2man | | help2man-texi | | hylafax | | idutils | | iso_15924 | [] | iso_3166 | [] [] [] [] [] [] [] [] [] [] | iso_3166_2 | | iso_4217 | [] | iso_639 | [] [] [] [] [] [] [] [] [] | iso_639_3 | [] [] | iso_639_5 | | jwhois | | kbd | [] | klavaro | [] [] [] [] [] | latrine | | ld | [] | leafpad | [] [] [] [] | libc | [] [] [] | libexif | () | libextractor | | libgnutls | [] | libgphoto2 | [] | libgphoto2_port | [] | libgsasl | | libiconv | [] [] | libidn | [] | liferea | [] [] [] [] | lilypond | [] [] | lordsawar | [] | lprng | | lynx | [] [] | m4 | [] | mailfromd | | mailutils | | make | [] | man-db | [] [] | man-db-manpages | | midi-instruments | [] [] [] | minicom | [] | mkisofs | [] | myserver | [] | nano | [] [] [] | opcodes | | parted | [] | pies | | popt | [] | procps-ng | | procps-ng-man | | psmisc | [] | pspp | [] | pushover | [] | pwdutils | | pyspread | | radius | [] | recode | [] [] [] | recutils | | rpm | | rush | | sarg | | sed | [] [] [] | sharutils | [] | shishi | | skribilo | | solfege | [] | solfege-manual | | spotmachine | | sudo | [] [] | sudoers | [] [] | sysstat | [] | tar | [] [] [] | texinfo | [] [] | texinfo_document | [] | tigervnc | [] | tin | | tin-man | | tracgoogleappsa... | | trader | | util-linux | [] | ve | | vice | | vmm | | vorbis-tools | [] | wastesedge | | wcd | | wcd-man | | wdiff | [] [] | wget | [] | wyslij-po | | xboard | | xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | xkeyboard-config | [] [] [] | +---------------------------------------------------+ af am an ar as ast az be bg bn bn_IN bs ca crh cs 4 0 2 5 3 11 0 8 23 3 3 1 54 4 73 da de el en en_GB en_ZA eo es et eu fa fi fr +--------------------------------------------------+ a2ps | [] [] [] [] [] [] [] [] [] | aegis | [] [] [] [] | anubis | [] [] [] [] [] | aspell | [] [] [] [] [] [] [] | bash | [] [] [] | bfd | [] [] [] [] | binutils | [] [] [] | bison | [] [] [] [] [] [] [] [] | bison-runtime | [] [] [] [] [] [] [] [] | buzztrax | [] [] [] [] | ccd2cue | [] [] [] | ccide | [] [] [] [] [] [] | cflow | [] [] [] [] [] | clisp | [] [] [] [] [] | coreutils | [] [] [] [] [] | cpio | [] [] [] [] [] | cppi | [] [] [] [] [] | cpplib | [] [] [] [] [] [] | cryptsetup | [] [] [] [] [] | datamash | [] [] [] [] | denemo | [] | dfarc | [] [] [] [] [] [] | dialog | [] [] [] [] [] [] [] [] [] | dico | [] [] [] [] | diffutils | [] [] [] [] [] [] | dink | [] [] [] [] [] [] | direvent | [] [] [] [] | doodle | [] [] [] [] | dos2unix | [] [] [] [] [] | dos2unix-man | [] [] [] | e2fsprogs | [] [] [] [] [] | enscript | [] [] [] [] [] [] | exif | [] [] [] [] [] [] | fetchmail | [] () [] [] [] [] [] | findutils | [] [] [] [] [] [] [] [] | flex | [] [] [] [] [] [] | freedink | [] [] [] [] [] [] [] [] | fusionforge | [] [] [] | gas | [] [] [] | gawk | [] [] [] [] [] | gcal | [] [] [] [] | gcc | [] [] | gdbm | [] [] [] [] [] | gettext-examples | [] [] [] [] [] [] [] | gettext-runtime | [] [] [] [] [] [] | gettext-tools | [] [] [] [] [] | gjay | [] [] [] [] | glunarclock | [] [] [] [] [] | gnubiff | () [] [] () | gnubik | [] [] [] [] [] | gnucash | [] () () () () () () | gnuchess | [] [] [] [] | gnulib | [] [] [] [] [] [] [] | gnunet | [] | gnunet-gtk | [] | gold | [] [] [] | gphoto2 | [] () [] [] | gprof | [] [] [] [] [] [] | gramadoir | [] [] [] [] [] | grep | [] [] [] [] [] [] [] | grub | [] [] [] [] [] | gsasl | [] [] [] [] [] | gss | [] [] [] [] [] | gst-plugins-bad | [] [] | gst-plugins-base | [] [] [] [] [] [] | gst-plugins-good | [] [] [] [] [] [] [] | gst-plugins-ugly | [] [] [] [] [] [] [] [] | gstreamer | [] [] [] [] [] [] [] | gtick | [] () [] [] [] | gtkam | [] () [] [] [] [] | gtkspell | [] [] [] [] [] [] [] [] | guix | [] [] | guix-packages | | gutenprint | [] [] [] [] | hello | [] [] [] [] [] [] [] [] | help2man | [] [] [] [] [] [] [] | help2man-texi | [] [] [] | hylafax | [] [] | idutils | [] [] [] [] [] | iso_15924 | [] () [] [] () [] () | iso_3166 | [] () [] [] [] [] () [] () | iso_3166_2 | [] () () () | iso_4217 | [] () [] [] [] () [] () | iso_639 | [] () [] [] () [] () | iso_639_3 | () () () | iso_639_5 | () () () | jwhois | [] [] [] [] [] | kbd | [] [] [] [] [] [] | klavaro | [] [] [] [] [] [] [] | latrine | [] () [] [] | ld | [] [] [] [] | leafpad | [] [] [] [] [] [] [] [] | libc | [] [] [] [] [] | libexif | [] [] () [] [] | libextractor | [] | libgnutls | [] [] [] [] | libgphoto2 | [] () [] | libgphoto2_port | [] () [] [] [] [] | libgsasl | [] [] [] [] [] | libiconv | [] [] [] [] [] [] [] | libidn | [] [] [] [] [] | liferea | [] () [] [] [] [] [] | lilypond | [] [] [] [] [] [] | lordsawar | [] [] | lprng | | lynx | [] [] [] [] [] [] | m4 | [] [] [] [] [] [] | mailfromd | [] | mailutils | [] [] [] [] | make | [] [] [] [] [] | man-db | [] [] [] [] | man-db-manpages | [] [] | midi-instruments | [] [] [] [] [] [] [] [] [] | minicom | [] [] [] [] [] | mkisofs | [] [] [] | myserver | [] [] [] [] | nano | [] [] [] [] [] [] [] | opcodes | [] [] [] [] [] | parted | [] [] [] | pies | [] | popt | [] [] [] [] [] [] | procps-ng | [] [] | procps-ng-man | [] [] | psmisc | [] [] [] [] [] [] [] | pspp | [] [] [] | pushover | () [] [] [] | pwdutils | [] [] [] | pyspread | [] [] [] | radius | [] [] | recode | [] [] [] [] [] [] [] | recutils | [] [] [] [] | rpm | [] [] [] [] [] | rush | [] [] [] | sarg | [] [] | sed | [] [] [] [] [] [] [] [] | sharutils | [] [] [] [] | shishi | [] [] [] | skribilo | [] [] | solfege | [] [] [] [] [] [] [] [] | solfege-manual | [] [] [] [] [] | spotmachine | [] [] [] [] | sudo | [] [] [] [] [] [] | sudoers | [] [] [] [] [] [] | sysstat | [] [] [] [] [] [] | tar | [] [] [] [] [] [] [] | texinfo | [] [] [] [] [] | texinfo_document | [] [] [] [] | tigervnc | [] [] [] [] [] [] | tin | [] [] [] [] | tin-man | [] | tracgoogleappsa... | [] [] [] [] [] | trader | [] [] [] [] [] [] | util-linux | [] [] [] [] | ve | [] [] [] [] [] | vice | () () () | vmm | [] [] | vorbis-tools | [] [] [] [] | wastesedge | [] () | wcd | [] [] [] [] | wcd-man | [] | wdiff | [] [] [] [] [] [] [] | wget | [] [] [] [] [] [] | wyslij-po | [] [] [] [] | xboard | [] [] [] [] | xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | xkeyboard-config | [] [] [] [] [] [] [] | +--------------------------------------------------+ da de el en en_GB en_ZA eo es et eu fa fi fr 120 130 32 1 6 0 94 95 22 13 4 103 136 ga gd gl gu he hi hr hu hy ia id is it ja ka kk +-------------------------------------------------+ a2ps | [] [] [] [] | aegis | [] | anubis | [] [] [] [] | aspell | [] [] [] [] [] | bash | [] [] [] | bfd | [] [] | binutils | [] [] [] | bison | [] | bison-runtime | [] [] [] [] [] [] [] [] | buzztrax | | ccd2cue | [] | ccide | [] [] | cflow | [] [] [] | clisp | | coreutils | [] [] [] | cpio | [] [] [] [] [] [] | cppi | [] [] [] [] [] | cpplib | [] [] | cryptsetup | [] | datamash | | denemo | [] | dfarc | [] [] [] | dialog | [] [] [] [] [] [] [] [] [] [] | dico | | diffutils | [] [] [] [] | dink | [] | direvent | [] | doodle | [] [] | dos2unix | [] [] | dos2unix-man | | e2fsprogs | [] | enscript | [] [] [] | exif | [] [] [] [] [] [] | fetchmail | [] [] [] | findutils | [] [] [] [] [] [] [] | flex | [] | freedink | [] [] [] [] | fusionforge | | gas | [] | gawk | [] () [] | gcal | | gcc | | gdbm | | gettext-examples | [] [] [] [] [] [] [] | gettext-runtime | [] [] [] [] [] [] [] | gettext-tools | [] [] [] | gjay | [] | glunarclock | [] [] [] [] [] [] | gnubiff | [] [] () | gnubik | [] [] [] | gnucash | () () () () () [] | gnuchess | | gnulib | [] [] [] [] [] | gnunet | | gnunet-gtk | | gold | [] [] | gphoto2 | [] [] [] [] | gprof | [] [] [] [] | gramadoir | [] [] [] | grep | [] [] [] [] [] [] [] | grub | [] [] [] | gsasl | [] [] [] [] [] | gss | [] [] [] [] [] | gst-plugins-bad | [] | gst-plugins-base | [] [] [] [] | gst-plugins-good | [] [] [] [] [] [] | gst-plugins-ugly | [] [] [] [] [] [] | gstreamer | [] [] [] [] [] | gtick | [] [] [] [] [] | gtkam | [] [] [] [] [] | gtkspell | [] [] [] [] [] [] [] [] [] [] | guix | | guix-packages | | gutenprint | [] [] [] | hello | [] [] [] [] [] | help2man | [] [] [] | help2man-texi | | hylafax | [] | idutils | [] [] | iso_15924 | [] [] [] [] [] [] | iso_3166 | [] [] [] [] [] [] [] [] [] [] [] [] [] | iso_3166_2 | [] [] | iso_4217 | [] [] [] [] [] [] | iso_639 | [] [] [] [] [] [] [] [] [] | iso_639_3 | [] [] | iso_639_5 | | jwhois | [] [] [] [] | kbd | [] [] [] | klavaro | [] [] [] [] [] | latrine | [] | ld | [] [] [] [] | leafpad | [] [] [] [] [] [] [] () | libc | [] [] [] [] [] | libexif | [] | libextractor | | libgnutls | [] | libgphoto2 | [] [] | libgphoto2_port | [] [] | libgsasl | [] [] [] [] | libiconv | [] [] [] [] [] [] [] | libidn | [] [] [] [] | liferea | [] [] [] [] [] | lilypond | [] | lordsawar | | lprng | [] | lynx | [] [] [] [] | m4 | [] [] [] [] [] | mailfromd | | mailutils | | make | [] [] [] [] | man-db | [] [] | man-db-manpages | [] [] | midi-instruments | [] [] [] [] [] [] [] [] [] | minicom | [] [] [] | mkisofs | [] [] | myserver | [] | nano | [] [] [] [] [] | opcodes | [] [] [] | parted | [] [] [] [] | pies | | popt | [] [] [] [] [] [] [] [] [] [] | procps-ng | | procps-ng-man | | psmisc | [] [] [] [] | pspp | [] [] | pushover | [] | pwdutils | [] | pyspread | | radius | [] | recode | [] [] [] [] [] [] [] | recutils | | rpm | [] | rush | [] | sarg | | sed | [] [] [] [] [] [] [] | sharutils | | shishi | | skribilo | [] | solfege | [] [] | solfege-manual | | spotmachine | | sudo | [] [] [] [] | sudoers | [] [] [] | sysstat | [] [] [] | tar | [] [] [] [] [] [] | texinfo | [] [] [] | texinfo_document | [] [] | tigervnc | | tin | | tin-man | | tracgoogleappsa... | [] [] [] [] | trader | [] [] | util-linux | [] | ve | [] | vice | () () | vmm | | vorbis-tools | [] [] | wastesedge | () | wcd | | wcd-man | | wdiff | [] [] [] | wget | [] [] [] | wyslij-po | [] [] [] | xboard | | xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] | xkeyboard-config | [] [] [] [] [] | +-------------------------------------------------+ ga gd gl gu he hi hr hu hy ia id is it ja ka kk 35 2 47 4 8 2 53 69 2 6 80 11 86 58 0 3 kn ko ku ky lg lt lv mk ml mn mr ms mt nb ne nl +--------------------------------------------------+ a2ps | [] [] | aegis | [] | anubis | [] [] [] | aspell | [] [] | bash | [] [] | bfd | | binutils | | bison | [] | bison-runtime | [] [] [] [] [] [] | buzztrax | | ccd2cue | | ccide | [] [] | cflow | [] | clisp | [] | coreutils | [] [] | cpio | [] | cppi | | cpplib | [] | cryptsetup | [] | datamash | [] [] | denemo | | dfarc | [] [] | dialog | [] [] [] [] [] [] | dico | | diffutils | [] [] [] | dink | [] | direvent | [] | doodle | [] | dos2unix | [] [] | dos2unix-man | [] | e2fsprogs | [] | enscript | [] | exif | [] [] | fetchmail | [] | findutils | [] [] | flex | [] | freedink | [] [] | fusionforge | | gas | | gawk | [] | gcal | | gcc | | gdbm | | gettext-examples | [] [] [] [] [] [] | gettext-runtime | [] [] | gettext-tools | [] | gjay | | glunarclock | [] [] | gnubiff | [] | gnubik | [] [] | gnucash | () () () () () () () [] | gnuchess | [] [] | gnulib | [] | gnunet | | gnunet-gtk | | gold | | gphoto2 | [] | gprof | [] [] | gramadoir | [] | grep | [] [] | grub | [] [] [] | gsasl | [] | gss | | gst-plugins-bad | [] [] | gst-plugins-base | [] [] [] | gst-plugins-good | [] [] [] [] | gst-plugins-ugly | [] [] [] [] [] | gstreamer | [] [] | gtick | [] | gtkam | [] [] | gtkspell | [] [] [] [] [] [] [] | guix | | guix-packages | | gutenprint | [] | hello | [] [] [] | help2man | [] | help2man-texi | | hylafax | [] | idutils | [] | iso_15924 | () [] [] | iso_3166 | [] [] [] () [] [] [] [] [] [] | iso_3166_2 | () [] | iso_4217 | () [] [] [] | iso_639 | [] [] () [] [] [] [] | iso_639_3 | [] () [] | iso_639_5 | () | jwhois | [] [] | kbd | [] | klavaro | [] [] | latrine | | ld | | leafpad | [] [] [] [] [] | libc | [] [] | libexif | [] | libextractor | [] | libgnutls | [] [] | libgphoto2 | [] | libgphoto2_port | [] | libgsasl | [] | libiconv | [] [] | libidn | [] | liferea | [] [] [] | lilypond | [] | lordsawar | | lprng | | lynx | [] | m4 | [] | mailfromd | | mailutils | | make | [] [] | man-db | [] | man-db-manpages | [] | midi-instruments | [] [] [] [] [] [] [] | minicom | [] | mkisofs | [] | myserver | | nano | [] [] [] | opcodes | [] | parted | [] | pies | | popt | [] [] [] [] [] | procps-ng | | procps-ng-man | | psmisc | [] | pspp | [] [] | pushover | | pwdutils | [] | pyspread | | radius | [] | recode | [] [] | recutils | [] | rpm | [] | rush | [] | sarg | | sed | [] [] | sharutils | [] | shishi | | skribilo | | solfege | [] [] | solfege-manual | [] | spotmachine | [] | sudo | [] [] | sudoers | [] [] | sysstat | [] [] | tar | [] [] [] | texinfo | [] | texinfo_document | [] | tigervnc | [] | tin | | tin-man | | tracgoogleappsa... | [] [] [] | trader | [] | util-linux | [] | ve | [] | vice | [] | vmm | [] | vorbis-tools | [] | wastesedge | [] | wcd | [] | wcd-man | [] | wdiff | [] | wget | [] [] | wyslij-po | [] | xboard | [] | xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] | xkeyboard-config | [] [] [] | +--------------------------------------------------+ kn ko ku ky lg lt lv mk ml mn mr ms mt nb ne nl 5 11 4 6 0 13 22 3 3 3 4 11 2 40 1 124 nn or os pa pl ps pt pt_BR ro ru rw sk sl sq sr +--------------------------------------------------+ a2ps | [] [] [] [] [] [] [] | aegis | [] [] | anubis | [] [] [] | aspell | [] [] [] [] [] [] [] | bash | [] [] [] [] [] | bfd | [] | binutils | [] [] | bison | [] [] [] | bison-runtime | [] [] [] [] [] [] [] [] | buzztrax | | ccd2cue | [] | ccide | [] [] [] | cflow | [] [] | clisp | [] | coreutils | [] [] [] [] | cpio | [] [] [] | cppi | [] [] [] | cpplib | [] [] [] | cryptsetup | [] [] | datamash | [] [] | denemo | | dfarc | [] [] [] | dialog | [] [] [] [] [] [] [] | dico | [] | diffutils | [] [] | dink | | direvent | [] [] | doodle | [] [] | dos2unix | [] [] [] [] | dos2unix-man | [] [] | e2fsprogs | [] | enscript | [] [] [] [] [] [] | exif | [] [] [] [] [] [] | fetchmail | [] [] [] | findutils | [] [] [] [] [] | flex | [] [] [] [] [] | freedink | [] [] [] [] [] | fusionforge | | gas | | gawk | [] | gcal | | gcc | | gdbm | [] [] [] | gettext-examples | [] [] [] [] [] [] [] [] | gettext-runtime | [] [] [] [] [] [] [] [] [] | gettext-tools | [] [] [] [] [] [] [] | gjay | [] | glunarclock | [] [] [] [] [] [] | gnubiff | [] | gnubik | [] [] [] [] | gnucash | () () () () [] | gnuchess | [] [] | gnulib | [] [] [] [] [] | gnunet | | gnunet-gtk | | gold | | gphoto2 | [] [] [] [] [] | gprof | [] [] [] [] | gramadoir | [] [] | grep | [] [] [] [] [] [] | grub | [] [] [] [] [] | gsasl | [] [] [] | gss | [] [] [] [] | gst-plugins-bad | [] [] [] [] | gst-plugins-base | [] [] [] [] [] [] | gst-plugins-good | [] [] [] [] [] [] [] | gst-plugins-ugly | [] [] [] [] [] [] [] | gstreamer | [] [] [] [] [] [] [] | gtick | [] [] [] [] [] | gtkam | [] [] [] [] [] [] | gtkspell | [] [] [] [] [] [] [] [] [] | guix | | guix-packages | | gutenprint | [] [] | hello | [] [] [] [] [] [] | help2man | [] [] [] [] | help2man-texi | [] | hylafax | | idutils | [] [] [] | iso_15924 | [] () [] [] [] [] | iso_3166 | [] [] [] [] () [] [] [] [] [] [] [] [] | iso_3166_2 | [] () [] | iso_4217 | [] [] () [] [] [] [] [] | iso_639 | [] [] [] () [] [] [] [] [] [] | iso_639_3 | [] () | iso_639_5 | () [] | jwhois | [] [] [] [] | kbd | [] [] | klavaro | [] [] [] [] [] | latrine | [] | ld | | leafpad | [] [] [] [] [] [] [] [] [] | libc | [] [] [] | libexif | [] () [] | libextractor | [] | libgnutls | [] | libgphoto2 | [] | libgphoto2_port | [] [] [] [] [] | libgsasl | [] [] [] [] | libiconv | [] [] [] [] [] | libidn | [] [] [] | liferea | [] [] [] [] () [] [] | lilypond | | lordsawar | | lprng | [] | lynx | [] [] | m4 | [] [] [] [] [] | mailfromd | [] | mailutils | [] | make | [] [] [] | man-db | [] [] [] | man-db-manpages | [] [] [] | midi-instruments | [] [] [] [] [] [] [] [] | minicom | [] [] [] [] | mkisofs | [] [] [] | myserver | [] [] | nano | [] [] [] [] [] [] | opcodes | | parted | [] [] [] [] [] [] | pies | [] | popt | [] [] [] [] [] [] | procps-ng | [] | procps-ng-man | [] | psmisc | [] [] [] [] | pspp | [] [] | pushover | | pwdutils | [] | pyspread | [] [] | radius | [] [] | recode | [] [] [] [] [] [] [] [] | recutils | [] | rpm | [] | rush | [] [] [] | sarg | [] [] | sed | [] [] [] [] [] [] [] [] | sharutils | [] [] [] | shishi | [] [] | skribilo | | solfege | [] [] [] | solfege-manual | [] [] | spotmachine | [] [] | sudo | [] [] [] [] [] [] | sudoers | [] [] [] [] | sysstat | [] [] [] [] [] | tar | [] [] [] [] [] | texinfo | [] [] [] | texinfo_document | [] [] | tigervnc | [] | tin | [] | tin-man | | tracgoogleappsa... | [] [] [] [] | trader | [] | util-linux | [] [] | ve | [] [] [] | vice | | vmm | | vorbis-tools | [] [] [] | wastesedge | | wcd | | wcd-man | | wdiff | [] [] [] [] [] | wget | [] [] [] [] | wyslij-po | [] [] [] [] | xboard | [] [] [] | xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] | xkeyboard-config | [] [] [] [] | +--------------------------------------------------+ nn or os pa pl ps pt pt_BR ro ru rw sk sl sq sr 7 3 1 6 114 1 12 83 32 80 3 38 45 7 94 sv sw ta te tg th tr uk ur vi wa wo zh_CN zh_HK +---------------------------------------------------+ a2ps | [] [] [] [] [] | aegis | [] | anubis | [] [] [] [] | aspell | [] [] [] [] | bash | [] [] [] [] | bfd | [] [] | binutils | [] [] [] | bison | [] [] [] [] | bison-runtime | [] [] [] [] [] [] | buzztrax | [] [] [] | ccd2cue | [] [] [] | ccide | [] [] [] [] | cflow | [] [] [] [] | clisp | | coreutils | [] [] [] [] | cpio | [] [] [] [] [] | cppi | [] [] [] [] | cpplib | [] [] [] [] [] | cryptsetup | [] [] [] | datamash | [] [] [] | denemo | | dfarc | [] | dialog | [] [] [] [] [] [] | dico | [] | diffutils | [] [] [] [] [] | dink | | direvent | [] [] | doodle | [] [] | dos2unix | [] [] [] [] | dos2unix-man | [] [] [] | e2fsprogs | [] [] [] [] | enscript | [] [] [] [] | exif | [] [] [] [] [] | fetchmail | [] [] [] [] | findutils | [] [] [] [] [] | flex | [] [] [] [] | freedink | [] [] | fusionforge | | gas | [] | gawk | [] [] | gcal | [] [] | gcc | [] [] | gdbm | [] [] | gettext-examples | [] [] [] [] [] [] | gettext-runtime | [] [] [] [] [] [] | gettext-tools | [] [] [] [] [] | gjay | [] [] | glunarclock | [] [] [] [] | gnubiff | [] [] | gnubik | [] [] [] [] | gnucash | () () () () [] | gnuchess | [] [] | gnulib | [] [] [] [] | gnunet | | gnunet-gtk | | gold | [] [] | gphoto2 | [] [] [] [] | gprof | [] [] [] [] | gramadoir | [] [] [] | grep | [] [] [] [] [] | grub | [] [] [] [] | gsasl | [] [] [] [] | gss | [] [] [] | gst-plugins-bad | [] [] [] [] | gst-plugins-base | [] [] [] [] [] | gst-plugins-good | [] [] [] [] [] | gst-plugins-ugly | [] [] [] [] [] | gstreamer | [] [] [] [] [] | gtick | [] [] [] | gtkam | [] [] [] [] | gtkspell | [] [] [] [] [] [] [] [] | guix | [] | guix-packages | | gutenprint | [] [] [] [] | hello | [] [] [] [] [] [] | help2man | [] [] [] | help2man-texi | [] | hylafax | [] | idutils | [] [] [] | iso_15924 | [] () [] [] () [] | iso_3166 | [] [] () [] [] () [] [] [] | iso_3166_2 | () [] [] () [] | iso_4217 | [] () [] [] () [] [] | iso_639 | [] [] [] () [] [] () [] [] [] | iso_639_3 | [] () [] [] () | iso_639_5 | () [] () | jwhois | [] [] [] [] | kbd | [] [] [] | klavaro | [] [] [] [] [] [] | latrine | [] [] | ld | [] [] [] [] [] | leafpad | [] [] [] [] [] [] | libc | [] [] [] [] [] | libexif | [] () | libextractor | [] [] | libgnutls | [] [] [] [] | libgphoto2 | [] [] | libgphoto2_port | [] [] [] [] | libgsasl | [] [] [] [] | libiconv | [] [] [] [] [] | libidn | () [] [] [] | liferea | [] [] [] [] [] | lilypond | [] | lordsawar | | lprng | [] | lynx | [] [] [] [] | m4 | [] [] [] | mailfromd | [] [] | mailutils | [] | make | [] [] [] [] | man-db | [] [] | man-db-manpages | [] | midi-instruments | [] [] [] [] [] [] | minicom | [] [] | mkisofs | [] [] [] | myserver | [] | nano | [] [] [] [] | opcodes | [] [] [] | parted | [] [] [] [] [] | pies | [] [] | popt | [] [] [] [] [] [] [] | procps-ng | [] [] | procps-ng-man | [] | psmisc | [] [] [] [] | pspp | [] [] [] | pushover | [] | pwdutils | [] [] | pyspread | [] | radius | [] [] | recode | [] [] [] [] | recutils | [] [] [] | rpm | [] [] [] [] | rush | [] [] | sarg | | sed | [] [] [] [] [] | sharutils | [] [] [] | shishi | [] [] | skribilo | [] | solfege | [] [] [] | solfege-manual | [] | spotmachine | [] [] [] | sudo | [] [] [] [] | sudoers | [] [] [] | sysstat | [] [] [] [] [] | tar | [] [] [] [] [] | texinfo | [] [] [] | texinfo_document | [] | tigervnc | [] [] | tin | [] | tin-man | | tracgoogleappsa... | [] [] [] [] [] | trader | [] | util-linux | [] [] [] | ve | [] [] [] [] | vice | () () | vmm | | vorbis-tools | [] [] | wastesedge | | wcd | [] [] [] | wcd-man | [] | wdiff | [] [] [] [] | wget | [] [] [] | wyslij-po | [] [] | xboard | [] | xdg-user-dirs | [] [] [] [] [] [] [] [] [] | xkeyboard-config | [] [] [] [] | +---------------------------------------------------+ sv sw ta te tg th tr uk ur vi wa wo zh_CN zh_HK 91 1 4 3 0 13 50 113 1 126 7 1 95 7 zh_TW +-------+ a2ps | | 30 aegis | | 9 anubis | | 19 aspell | | 28 bash | [] | 21 bfd | | 9 binutils | | 12 bison | [] | 18 bison-runtime | [] | 38 buzztrax | | 8 ccd2cue | | 8 ccide | | 17 cflow | | 15 clisp | | 10 coreutils | | 20 cpio | | 20 cppi | | 17 cpplib | [] | 19 cryptsetup | | 13 datamash | | 11 denemo | | 4 dfarc | | 16 dialog | [] | 42 dico | | 6 diffutils | | 21 dink | | 9 direvent | | 10 doodle | | 12 dos2unix | [] | 18 dos2unix-man | | 9 e2fsprogs | | 14 enscript | | 21 exif | | 26 fetchmail | | 19 findutils | | 28 flex | [] | 19 freedink | | 23 fusionforge | | 3 gas | | 5 gawk | | 12 gcal | | 7 gcc | | 4 gdbm | | 10 gettext-examples | [] | 40 gettext-runtime | [] | 34 gettext-tools | [] | 24 gjay | | 8 glunarclock | [] | 27 gnubiff | | 9 gnubik | | 19 gnucash | () | 7 gnuchess | | 10 gnulib | | 23 gnunet | | 1 gnunet-gtk | | 1 gold | | 7 gphoto2 | [] | 19 gprof | | 21 gramadoir | | 14 grep | [] | 31 grub | | 21 gsasl | [] | 19 gss | | 17 gst-plugins-bad | | 14 gst-plugins-base | | 27 gst-plugins-good | | 32 gst-plugins-ugly | | 34 gstreamer | [] | 31 gtick | | 19 gtkam | | 24 gtkspell | [] | 48 guix | | 3 guix-packages | | 0 gutenprint | | 15 hello | [] | 30 help2man | | 18 help2man-texi | | 5 hylafax | | 5 idutils | | 14 iso_15924 | [] | 23 iso_3166 | [] | 58 iso_3166_2 | | 9 iso_4217 | [] | 28 iso_639 | [] | 46 iso_639_3 | | 10 iso_639_5 | | 2 jwhois | [] | 20 kbd | | 16 klavaro | | 30 latrine | | 7 ld | [] | 15 leafpad | [] | 40 libc | [] | 24 libexif | | 9 libextractor | | 5 libgnutls | | 13 libgphoto2 | | 9 libgphoto2_port | [] | 19 libgsasl | | 18 libiconv | [] | 29 libidn | | 17 liferea | | 29 lilypond | | 11 lordsawar | | 3 lprng | | 3 lynx | | 19 m4 | [] | 22 mailfromd | | 4 mailutils | | 6 make | | 19 man-db | | 14 man-db-manpages | | 9 midi-instruments | [] | 43 minicom | [] | 17 mkisofs | | 13 myserver | | 9 nano | [] | 29 opcodes | | 12 parted | [] | 21 pies | | 4 popt | [] | 36 procps-ng | | 5 procps-ng-man | | 4 psmisc | [] | 22 pspp | | 13 pushover | | 6 pwdutils | | 8 pyspread | | 6 radius | | 9 recode | | 31 recutils | | 9 rpm | [] | 13 rush | | 10 sarg | | 4 sed | [] | 34 sharutils | | 12 shishi | | 7 skribilo | | 4 solfege | | 19 solfege-manual | | 9 spotmachine | | 10 sudo | | 24 sudoers | | 20 sysstat | | 22 tar | [] | 30 texinfo | | 17 texinfo_document | | 11 tigervnc | | 11 tin | [] | 7 tin-man | | 1 tracgoogleappsa... | [] | 22 trader | | 11 util-linux | | 12 ve | | 14 vice | | 1 vmm | | 3 vorbis-tools | | 13 wastesedge | | 2 wcd | | 8 wcd-man | | 3 wdiff | [] | 23 wget | | 19 wyslij-po | | 14 xboard | | 9 xdg-user-dirs | [] | 68 xkeyboard-config | [] | 27 +-------+ 90 teams zh_TW 166 domains 42 2748 Some counters in the preceding matrix are higher than the number of visible blocks let us expect. This is because a few extra PO files are used for implementing regional variants of languages, or language dialects. For a PO file in the matrix above to be effective, the package to which it applies should also have been internationalized and distributed as such by its maintainer. There might be an observable lag between the mere existence a PO file and its wide availability in a distribution. If Jun 2014 seems to be old, you may fetch a more recent copy of this 'ABOUT-NLS' file on most GNU archive sites. The most up-to-date matrix with full percentage details can be found at 'http://translationproject.org/extra/matrix.html'. 1.5 Using 'gettext' in new packages =================================== If you are writing a freely available program and want to internationalize it you are welcome to use GNU 'gettext' in your package. Of course you have to respect the GNU Lesser General Public License which covers the use of the GNU 'gettext' library. This means in particular that even non-free programs can use 'libintl' as a shared library, whereas only free software can use 'libintl' as a static library or use modified versions of 'libintl'. Once the sources are changed appropriately and the setup can handle the use of 'gettext' the only thing missing are the translations. The Free Translation Project is also available for packages which are not developed inside the GNU project. Therefore the information given above applies also for every other Free Software Project. Contact 'coordinator@translationproject.org' to make the '.pot' files available to the translation teams. lightdm-gtk-greeter-2.0.5/Makefile.am0000664000175000017500000000173313252331672021424 0ustar00bluesabrebluesabre00000000000000# # Copyright (C) 2010 - 2011, Robert Ancell # Copyright (C) 2012, Lionel Le Folgoc # Copyright (C) 2018, Sean Davis # # This program is free software: you can redistribute it and/or modify it under # the terms of the GNU General Public License as published by the Free Software # Foundation, either version 3 of the License, or (at your option) any later # version. See http://www.gnu.org/copyleft/gpl.html the full text of the # license. # ACLOCAL_AMFLAGS = -I m4 SUBDIRS = data po src EXTRA_DIST = \ autogen.sh \ lightdm-gtk-greeter.doap DISTCLEANFILES = \ gtk-doc.make \ omf.make \ xmldocs.make .PHONY: ChangeLog ChangeLog: (cd $(top_srcdir) && bzr log --gnu-changelog > .changelog.tmp \ && mv .changelog.tmp ChangeLog; rm -f .changelog.tmp) \ || (touch ChangeLog; echo 'Bzr directory not found: installing possibly empty changelog.' >&2) dist-hook: ChangeLog -include $(top_srcdir)/git.mk lightdm-gtk-greeter-2.0.5/README0000664000175000017500000000005213243241724020237 0ustar00bluesabrebluesabre00000000000000https://launchpad.net/lightdm-gtk-greeter lightdm-gtk-greeter-2.0.5/autogen.sh0000775000175000017500000000271613252332156021371 0ustar00bluesabrebluesabre00000000000000#!/bin/sh # Run this to generate all the initial makefiles, etc. # # Copyright (C) 2010 - 2011, Robert Ancell # Copyright (C) 2017 - 2018, Sean Davis # # This program is free software: you can redistribute it and/or modify it under # the terms of the GNU General Public License as published by the Free Software # Foundation, either version 3 of the License, or (at your option) any later # version. See http://www.gnu.org/copyleft/gpl.html the full text of the # license. # test -n "$srcdir" || srcdir=$(dirname "$0") test -n "$srcdir" || srcdir=. olddir=$(pwd) cd $srcdir (test -f configure.ac) || { echo "*** ERROR: Directory '$srcdir' does not look like the top-level project directory ***" exit 1 } # shellcheck disable=SC2016 PKG_NAME=$(autoconf --trace 'AC_INIT:$1' configure.ac) if [ "$#" = 0 -a "x$NOCONFIGURE" = "x" ]; then echo "*** WARNING: I am going to run 'configure' with no arguments." >&2 echo "*** If you wish to pass any to it, please specify them on the" >&2 echo "*** '$0' command line." >&2 echo "" >&2 fi aclocal --install || exit 1 autoreconf --verbose --force --install || exit 1 cd "$olddir" if [ "$NOCONFIGURE" = "" ]; then $srcdir/configure "$@" || exit 1 if [ "$1" = "--help" ]; then exit 0 else echo "Now type 'make' to compile $PKG_NAME" || exit 1 fi else echo "Skipping configure process." fi lightdm-gtk-greeter-2.0.5/config.h.in0000664000175000017500000000557313253544551021424 0ustar00bluesabrebluesabre00000000000000/* config.h.in. Generated from configure.ac by autoheader. */ /* Command to start at-spi service */ #undef AT_SPI_COMMAND /* Define to 1 if translation of program messages to the user's native language is requested. */ #undef ENABLE_NLS /* GETTEXT package name */ #undef GETTEXT_PACKAGE /* Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the CoreFoundation framework. */ #undef HAVE_CFLOCALECOPYCURRENT /* Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in the CoreFoundation framework. */ #undef HAVE_CFPREFERENCESCOPYAPPVALUE /* Define if the GNU dcgettext() function is already present or preinstalled. */ #undef HAVE_DCGETTEXT /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H /* Define if the GNU gettext() function is already present or preinstalled. */ #undef HAVE_GETTEXT /* Define if you have the iconv() function and it works. */ #undef HAVE_ICONV /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define if "$IDO_PKG" is present */ #undef HAVE_LIBIDO /* Define if "$INDICATOR_PKG" is present */ #undef HAVE_LIBINDICATOR /* Define if "libindicator/indicator-ng.h" is present */ #undef HAVE_LIBINDICATOR_NG /* Building with liblightdmgobject 1.19.2 */ #undef HAVE_LIBLIGHTDMGOBJECT_1_19_2 /* Define if "libxklavier" is present */ #undef HAVE_LIBXKLAVIER /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Command to start indicators service */ #undef INDICATOR_SERVICES_COMMAND /* Kill greeter in SIGTERM handler, see LP1445461 */ #undef KILL_ON_SIGTERM /* Define to the sub-directory where libtool stores uninstalled libraries. */ #undef LT_OBJDIR /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the home page for this package. */ #undef PACKAGE_URL /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Version number of package */ #undef VERSION lightdm-gtk-greeter-2.0.5/AUTHORS0000664000175000017500000000065413252334202020431 0ustar00bluesabrebluesabre000000000000002010 - 2016, Robert Ancell 2011, Gunnar Hjalmarsson 2012, Julien Lavergne 2012 - 2013, Lionel Le Folgoc 2013 - 2018, Simon Steinbeiß 2013 - 2018, Sean Davis 2014, Andrew P. See bzr+ssh://bazaar.launchpad.net/+branch/lightdm-gtk-greeter for the commit history lightdm-gtk-greeter-2.0.5/NEWS0000664000175000017500000003455113252340063020065 0ustar00bluesabrebluesabre00000000000000Overview of changes in lightdm-gtk-greeter 2.0.5 * General: - Populated copyright information using bzr log * Config changes: - The ~power indicator is now displayed by default - New "at-spi-enabled" configuration option to disable the at-spi-bus after it has been enabled at build-time * Appearance improvements: - Added padding and additional classes for improved appearance with Adwaita, Greybird, and other themes Overview of changes in lightdm-gtk-greeter 2.0.4 * New features: - New cursor-theme-name and cursor-theme-size configuration keys * Build changes: - Finish port from gnome-common - Moved more deprecated function calls to greeterdeprecated.c/.h * Bugs fixed: - Fixed autologin-session (LP: #1707186) - Fixed accessibility with at-spi-bus on systemd and non-systemd environments (LP: #1366534, #1670933) - Fixed infinite flicker with multiple monitors (LP: #1410406, #1509780) Overview of changes in lightdm-gtk-greeter 2.0.3 * Build changes: - gnome-common is no longer required or used - Build errors with gcc-7 have been resolved * Bugs fixed: - Enabling Orca screen reader freezes the greeter (LP: #1483864) - Scale user image to fit instead of expanding greeter window (LP: #1512963) - Replace usage of deprecated GNOME macros (LP: #1599486, Debian: #829931) - Disable Alt+F4 shutdown accelerator if power indicator is not present (LP: #1690129) - Pre-fill logged in username when locked and hide-users is enabled (LP: #1701577) - Reset xsession to default if selected user is not found (LP: #1701745) - Missing break in switch (CID 1268326) - Deference after null check (CID 1268327) * Updated translations: - Bosnian, Catalan, Czech, Danish, Galician, Kazakh Overview of changes in lightdm-gtk-greeter 2.0.2 * New features: - Add support for lightdm 1.19.2+ - Include badge for Budgie desktop (LP: #1568494) * Bugs fixed: - Solid color instead of background image for some themes (LP: #1458330) - Restore user background after changing display setup - Correct login box blinking on login - Replaced a number of build-breaking deprecations * Updated translations Overview of changes in lightdm-gtk-greeter 2.0.1 * New features: - "lightdm-gtk-greeter.conf.d" support (LP: #1421587) * Bugs fixed: - Multihead setup: black/white/grey screen at start - failed detection of mirrored mode (LP: #1410406, #1426664, #1449567, #1448761) - Switching active monitor with visible "onboard" window can leave this window in invalid state - Onboard does not react to mouse clicks - Losing focus after changing monitors configuration - Every lock activates a new Virtual Terminal, see "changes" section (LP: #1445461) - Broken delayed autologin (LP: #854261) - Message label can remain hidden when it must be visible (GTK: #710888) * Updated translations * Required changes: - For systems with Gtk 3.16 (LP: #1445461), add the following option to the configure command line: --enable-kill-on-sigterm Overview of changes in lightdm-gtk-greeter 2.0.0 * New features: - Background crossfades when changing users - New one-window layout improves theming options - New MATE and WindowMaker session icons - Improved debugging with the allow-debugging configuration key * Bugs fixed: - lightdm-gtk-greeter leaves a11y (at-spi*) process behind (LP: #1366534) - Indicator services restart after every resume (LP: #1377743) - No indicators displayed when systemd-sysv is installed (LP: #1398619) * Updated translations * Required changes: - Remove "--enable-indicator-services" from configure command line (now obsolete) - For systems without "systemd-sysv", add the following line to the configure command line: --enable-indicator-services-command="init --user --startup-event indicator-services-start" Overview of changes in lightdm-gtk-greeter 1.9.0 * Drop Gtk2 support Overview of changes in lightdm-gtk-greeter 1.8.6 * New features: - Option to set monitor for displaying greeter windows: active-monitor - Option to control usage of user's background: user-background (LP: #1306362) - Panel layout now fully customizable - New builtin indicator: ~layout (LP: #1240569) - New accessibility menu item: screen reader (F4 hotkey) (experimental, LP: #1319848) - Option to set initial state of accessibility tools: a11y-states (LP: #1319848) * Bugs fixed: - Handling laptop lid state (LP: #1273922) - Lightdm greeter on dual monitor system has bad-sized background (LP: #1314603) - Login screen wallaper doesn't fill screen (LP: #1325719) - Use avatar set in config also without userlist (LP: #1317236) - Don't use XInput2 to set the root cursor (LP: #1024482) - Possible sigfault if sessions list is empty * Additional fixes: - Message "Failed to authenticate" do not overwrites the PAM error message now - Do not display password entry if password is not required - Passing all defined arguments to "onboard" in xembed mode - Checking for libido version at build * Updated translations * Required configuration changes: - host and clock labels are indicators now, new default panel layout: indicators=~host;~spacer;~clock;~spacer;~session;~language;~a11y;~power - You need to mark laptop monitor with "laptop=true" key in lightdm-gtk-greeter.conf to enable lid state handling (see the included lightdm-gtk-greeter.conf template) Overview of changes in lightdm-gtk-greeter 1.8.5 * Fix tooltips stealing focus (LP: #1307764) * Fix get_session to not get corrupted (LP: #1311933) * Fix "zoomed" implementation to correctly place the wallpaper. * Updated translations Overview of changes in lightdm-gtk-greeter 1.8.4 * Really fix unclean exit (LP: #1290575) * Updated translations Overview of changes in lightdm-gtk-greeter 1.8.3 * Fix unclean exit (LP: #1290575) * Install sample-lightdm-gtk-greeter.css into doc * Use the term "Guest Session" instead of "Guest Account" * Updated translations Overview of changes in lightdm-gtk-greeter 1.8.2 * Deprecated "show-indicators" for "indicators", improves LTS upgrade path * Bugs fixed: - Fixed segfault on uninstalled session (fixes fedora: 1002782, LP: #1272910) - Fixed CPU hogging with show-clock (fixes fedora: 1069963) - Use the system language by default (fixes LP: #1276072) - Greeter does not remember last session and language per user (LP: #1282139) - segfault libglib (LP: #1272910) * Additional fixes: - Fixed panel resizing off screen with clock and accessibility - Fixed centering of the clock - Fixed initilization of clock, do not display "label" - Fixed language and session selection for non-logged-in users - Added mlockall to prevent password capturing methods - Added badge for Pantheon session * Updated translations Overview of changes in lightdm-gtk-greeter 1.8.1 * Bugs fixed: - Fixed regression with enter not moving username entry to password entry. Overview of changes in lightdm-gtk-greeter 1.8.0 * New features: - Configurable screensaver timeout when used as a lock screen (default is 60 seconds) - A warning is now displayed when attempting to shut down or restart when other users are logged in. - Improved support for multiple PAM messages. - Improved theming support. - Sample css file to make creating Gtk3 themes easier - New keyboard shortcuts: - Alt+F4 -- shut down dialog - F9 -- session menu - F10 -- language menu - F11 -- accessibility menu - F12 -- power menu * Bugs fixed: - The PAM message is now reset when the selected user is changed. - The hint style for full in the configuration template is now correct (hintfull). - Fixed indicator loading with Ubuntu 14.04. - Fixed ability to move top panel in gtk3. * Required configuration changes (please read!): - The "show-language-selector" key is no longer a valid setting, and has been replaced by "show-indicators" - The "show-indicators" setting now controls the display of all panel controls. Either comment it out or remove it to get the default controls (session, language, a11y, power), or define each individually (see the included lightdm-gtk-greeter.conf template). Overview of changes in lightdm-gtk-greeter 1.7.1 * New features: - border-radius property now themeable with CSS - Widgets now support a themed alpha channel - Sessions are now represented by a graphical badge - Languages are now represented by a countrycode label * Bugs fixed: - LP #1266449: greeter crashes on empty username - LP #1264563: switch-to-greeter does not set lock hint - LP #1264771: Password entry box is not defined as invisible in glade definition - LP #1267742: Screen artifacts appear after restart and cold boot - LP #1270530: Login screen has boxes instead of text when font is not set * Additional fixes: - Improved username tooltips - Fixed memory leak in clock feature - Improved xscreensaver timeout functionality - Login button is now the "default" widget - Windows can no longer be positioned off-screen Overview of changes in lightdm-gtk-greeter 1.7.0 * New features: - Window positioning (relative or absolute) of the login window and power dialogs is now configurable in lightdm-gtk-greeter.conf - The default user image is now configurable in lightdm-gtk-greeter.conf * Accessibility improvements: - Onboard on-screen keyboard is now run in xembed mode - Addition of F1, F2, F3 hotkeys for accessibility menu items - Users can now be switched from the username/password entries with up/down - Restart/Power Off dialogs can now be cancelled with the Escape key * Improvements when used as a Lock Screen: - The screen is now blanked when locked and the greeter is started * Background loading improvements: - The background image is now loaded only once - Memory leaks from pixmaps and X clients have been fixed * Bugs fixed: - Debian #718497: Last PAM error message not showing - Debian #721510: Greeter panel clock fails with long date formats - LP #1031421: Greeter doesn't select user's last session when using "Other" - LP #1147914: Can't change the login window's position - LP #1191509: Disabling language selector leaves strange artifact on the screen - LP #1194694: move to password input if pressed after username input - LP #1231134: support enter key to validate login entry - LP #1232804: Improve "login greeter -> desktop" transition in Xubuntu - LP #1251431: user background gets painted over background specified in config file * Additional fixes: - Fixed typo in language selection - Fixed keyboard-focus with on-screen keyboard * Many thanks to our contributors for this release, Alistair Buxton and Andrew P. who provided the majority of the patches and functionality. Overview of changes in lightdm-gtk-greeter 1.6.1 * Fix inability to change session/languages on logout (lp: #1213837) Overview of changes in lightdm-gtk-greeter 1.6.0 * Selected username displayed in tooltip for combobox * Use GtkInfoBar for PAM authentication messages Overview of changes in lightdm-gtk-greeter 1.5.2 * Use HighContrast for accessibility as HighContrastInverse has been dropped upstream. * Reintroduce gtk2 support (choose at configure time). * Add support for loading the user-avatar. * Fix background-display when picture has no alpha channel (LP: #1086199). * Compile-in the ui file to avoid crashes when it's not present or too old. * Add libindicator support (configure flag and whitelist in the config file). * Move session-selector to the tray area * Interface update for login-window and shutdown/restart dialogs * Use symbolic icons for gtk3, standard icons for gtk2 * Use "zoom" scaling for wallpaper instead of "fit" scaling * Add on-screen keyboard to a11y * Addition of clock widget Overview of changes in lightdm-gtk-greeter 1.5.0 * Use new api for autologin. * Add support for loading user background from Accountsservice. Overview of changes in lightdm-gtk-greeter 1.3.1 * Clean up DISTCLEANFILES to fix FTBFS-twice-in-a-row * Drop custom icons now that there's a config option for the icon theme * Rename the 'Login' button to 'Unlock' when the user is already logged in * Don't hide the login box when cancel is pressed, instead refresh the prompt box to show the correct username prompt * Hide the Cancel button, useless with the userlist combobox Overview of changes in lightdm-gtk-greeter 1.3.0 * Properly center the login window after a resize * Add names to widgets to ease theming * Replace the userlist's treeview with a combobox * Document the option to show the language chooser * Add a config option to set the path to the logo image * Add a config option to set the icon theme * Use a known icon name for the accessibility menu * Remember the last session used * Update po/LINGUAS. Overview of changes in lightdm-gtk-greeter 1.1.6 * Fix 'Large Font' option for fontnames containing spaces (Bug #908926) * Fix 'Cancel' button action, and clear the error label (Bug #990315) * Add missing include for setlocale (Bug #999438) * Updated translations. Overview of changes in lightdm-gtk-greeter 1.1.5 * Restore all translations lost during the split from lightdm Overview of changes in lightdm-gtk-greeter 1.1.4 * Load greeter configuration from correct directory Overview of changes in lightdm-gtk-greeter 1.1.3 * Fix greeter looking for data in the wrong directory Overview of changes in lightdm-gtk-greeter 1.1.2 * Correctly link against libX11 * Remove deprecated GTK+ functions Overview of changes in lightdm-gtk-greeter 1.1.1 * Split out of lightdm source * Translate login prompts using the translations from PAM lightdm-gtk-greeter-2.0.5/ChangeLog0000664000175000017500000017624613253545066021163 0ustar00bluesabrebluesabre000000000000002018-03-18 Sean Davis Update for 2.0.5 release 2018-03-18 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-03-17 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-03-16 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-03-15 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-03-14 Sean Davis Update changelog 2018-03-14 Sean Davis Add config item for enabling at-spi-command 2018-03-14 Sean Davis Populate authors based on bzr log 2018-03-14 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-03-13 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-03-12 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-03-11 Sean Davis Improved appearance with Adwaita, Greybird, and other themes 2018-03-09 Simon Steinbeiß Also add keycap class to restart and shutdown windows 2018-03-08 Simon Steinbeiß Add keycap class to login window for rounded corners 2018-03-06 Simon Steinbeiß Make sure the separators don't alter the panel background 2018-03-06 Simon Steinbeiß Add some padding to hostname 2018-03-05 Simon Steinbeiß Add the osd styleclass to the greeter's panel 2018-03-11 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-03-10 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-03-09 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-03-08 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-03-07 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-03-06 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-03-05 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-03-04 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-03-03 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-03-02 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-03-01 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-02-27 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-02-26 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-02-25 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-02-24 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-02-23 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-02-21 Sean Davis Show ~power indicator by default 2018-02-21 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-02-20 Sean Davis Update for 2.0.4 release 2018-02-20 Sean Davis Fix the loop bug for good 2018-02-20 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-02-19 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-02-18 Sean Davis Update Makevars to use Rosetta Contributors and Canonical Ltd based on existing templates 2018-02-18 Sean Davis Drop unused AX_* from configure.ac 2018-02-18 Sean Davis Refresh .bzrignore 2018-02-18 Sean Davis Remove po/Makefile.in.in, now auto-generated 2018-02-18 Sean Davis Finish gnome-common build deprecation based on https://github.com/phako/gtkterm/commit/f3d567c9e03354940fa23a183ba900649cee5121 2018-02-18 Sean Davis WIP release notes 2018-02-18 Sean Davis Merge lp:~ppbogdan/lightdm-gtk-greeter/cursor-theme into lp:lightdm-gtk-greeter 2017-05-22 Piotr Bogdan < Tidy up deprecations and only apply timestamp logic if there is already an active monitor 2018-02-18 Sean Davis Add a note so future maintainers (myself included) know what's going on with the timestamp comparison 2018-02-18 Sean Davis Fix the infinite loop indefinitely. 2018-02-18 Sean Davis Strip AX_COMPILER_FLAGS to fix builds in bionic and beyond 2018-02-18 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2018-02-17 Sean Davis Add the missing po/Makefile.in.in for builds to work again 2018-02-17 Sean Davis Fix autologin-session (LP: #1707186) 2018-02-17 Sean Davis Merge lp:~samuel-thibault/lightdm-gtk-greeter/at-spi-bus into lp:lightdm-gtk-greeter (LP: #1366534, #1670933) 2017-12-21 Samuel Thibault Fix whitespaces 2017-12-21 Samuel Thibault fix build 2017-12-21 Samuel Thibault On exit, remove AT_SPI_BUS property from root window (LP: #1670933) This avoid the accessibility stack of the user session risking to try to reach the at-spi2 daemons of the lightdm session, thus avoiding LP: #1670933 and LP: #1366534 with systemd or without systemd. 2018-02-17 Sean Davis Prevent infinite signal emmission between two monitors (LP: #1410406, #1509780) 2017-09-28 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2017-09-23 Sean Davis Update for 2.0.2 release 2016-10-06 Sean Davis Support building with versions of liblightdm-gobject before and after 1.19.2 2016-10-05 Sean Davis Support updated lightdm interfaces 2016-10-05 Sean Davis Suppress string format literal warning 2016-10-03 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2016-09-16 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2016-09-09 Robert Ancell Update LINGUAS 2016-07-18 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2016-05-28 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2016-05-21 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2016-05-13 Sean Davis Include badge for Budgie desktop (CC BY-SA 4.0) (LP: #1568494) 2016-03-11 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2015-11-25 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2015-11-18 Robert Ancell Replace deprecated gdk_cursor_new with gdk_cursor_new_for_display 2015-11-18 Robert Ancell Fix compiler warnings about return values 2015-11-18 Robert Ancell Check for exo-csource at configure time 2015-08-20 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2015-07-08 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2015-07-01 Sean Davis Merge background fixes branch 2015-06-29 Andrew P. Missing property for #screen child (solid color background fix) 2015-06-26 Andrew P. Restore user background after changing monitors setup 2015-06-25 Andrew P. Use simple drawing method for greeter_background_save_xroot() - blinking at login 2015-05-22 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2015-05-20 Sean Davis Update for 2.0.1 release 2015-05-17 Sean Davis Merge lp:~lightdm-gtk-greeter-team/lightdm-gtk-greeter/lp-1445461-leave-instance into lp:lightdm-gtk-greeter 2015-05-05 Andrew P. LP1445461: make it optional, configure: --enable-kill-on-sigterm 2015-05-04 Andrew P. LP1445461: temporary workaround - killing greeter with exit() 2015-05-13 Sean Davis Merge lp:~kalgasnik/lightdm-gtk-greeter/lp-1453589-obsolete-options into lp:lightdm-gtk-greeter 2015-05-11 Andrew P. Config file: removing obsolete options 2015-05-13 Sean Davis Merge lp:~kalgasnik/lightdm-gtk-greeter/gtk-710888-GtkInfoBar-visibility into lp:lightdm-gtk-greeter 2015-05-06 Andrew P. GTK #710888: GtkInfoBar can remains hidden after show() 2015-05-13 Sean Davis Merge lp:~lbssousa/lightdm-gtk-greeter/fix-timed-autologin into lp:lightdm-gtk-greeter 2015-05-11 Laércio de Sousa Add missing argument in previous commit. 2015-05-11 Laércio de Sousa Avoid triggering autologin if user locks screen with light-locker. 2015-04-27 Laércio de Sousa Fix "prompted = TRUE;" misplacing in timed_autologin_cb() body. 2015-04-27 Laércio de Sousa Avoid authenticating same use twice on timed autologin. 2015-04-24 Laércio de Sousa Fix timed autologin issue when configured autologin user is already selected. 2015-05-03 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2015-04-25 Sean Davis Merge in post-2.0.0 fixes branch 2015-03-29 Andrew P. Fallback if no .conf files found 2015-03-27 Andrew P. conf.d support (LP: #1421587) 2015-02-27 Andrew P. Using (deprecated) gtk_widget_reparent instead of gtk_container_add/remove to fix moving "onboard" between displays in xembed mode 2015-02-25 Andrew P. "Onboard" - losing focus in xembed mode; Mirrored display - do not create second window for it 2015-04-24 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2015-04-07 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2015-02-23 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2015-02-15 Sean Davis Don't forget those translations 2015-02-15 Sean Davis Update for 2.0.0 release 2015-02-10 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2015-02-04 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2015-01-27 Sean Davis Merge pre2.0 fixes branch, tested, builds with make distcheck, all is well 2015-01-26 Andrew P. New configure options: "--enable-at-spi-command" and "--enable-indicator-services-command" (replaces "--enable-indicator-services"); using "upstart" instead of "init" (lp1398619) 2015-01-23 Andrew P. Strange loop in indicator_menu_show_cb() 2015-01-23 Andrew P. Using INDICATOR_OBJECT_SIGNAL_ENTRY_SCROLLED signal 2015-01-23 Andrew P. Fix close_pid() regression 2015-01-25 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2015-01-17 Simon Steinbeiß Background crossfades when changing users The new option is enabled by default, can be modified with "transition-duration" (default: 500ms) 2014-12-10 Andrew P. Fixed: unfocused login window if greeter starts when laptop lid closed and laptop=true 2014-11-29 Andrew P. Prototypes 2014-11-29 Andrew P. Saving focus on active monitor changing 2014-11-22 Andrew P. New value for "background" option: #default, do not override default GtkWindow background 2014-11-19 Andrew P. Crash on Background.connnect; unrefing background pixbufs too early 2014-11-15 Andrew P. Using gtk_widget_add_tick_callback() for background animation 2014-11-07 Andrew P. Transition: timeout = 30, user background delay = 250 2014-11-05 Andrew P. Delay before changing to user's background 2014-11-04 Andrew P. Attempt to implement background transition 2014-11-03 Andrew P. Merge background.set_default_config and background.set_monitor_config, transform Background to ref type 2015-01-17 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-12-13 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-12-10 Sean Davis Merge fix for lp-1366534 and lp-1377743 2014-11-27 Andrew P. lp1366534: at-spi process 2014-10-10 Andrew P. Kill "indicator-services-start" before gtk_main_quit (LP: #1377743) 2014-12-10 Sean Davis Merge allow-debugging-option branch 2014-11-28 Andrew P. allow-debugging option: enable debug messages 2014-11-14 Andrew P. New option: allow-debugging, disabling GtkInspector bindings 2014-12-05 Doug Torrance Add badges for Mate and Window Maker 2014-11-23 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-11-13 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-10-05 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-09-27 Sean Davis Merge one-window-layout branch 2014-09-24 Andrew P. Invalid #panel_window style class 2014-09-01 Andrew P. Hiding empty panel, keep screen_overlay hidden before gtk_main() 2014-08-31 Andrew P. One-window layout 2014-09-11 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-09-02 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-08-28 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-08-20 Sean Davis Updated Makefile.am 2014-08-17 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-08-16 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-08-10 Andrew P. Drop Gtk2 support, update NEWS and version number 2014-08-09 Andrew P. Update NEWS and version number 2014-08-09 Andrew P. Merge "GDK_CORE_DEVICE_EVENTS" branch 2014-05-14 Thaddäus Tintenfisch Don't use XInput2 to set the root cursor (LP: #1024482) 2014-08-09 Andrew P. Merge "states-and-orca" branch 2014-07-07 Andrew P. Typo in default .conf 2014-07-07 Andrew P. New option: reader (F4 key) 2014-07-07 Andrew P. Using menu_command_* to handle onboard 2014-07-07 Andrew P. New option: a11y-states 2014-08-09 Andrew P. Merge "hide-user-image" branch 2014-07-01 Andrew P. Users combobox: 250px is enough for hide-user-image mode 2014-06-29 Andrew P. New option: "hide-user-image" 2014-08-09 Andrew P. Merge "greeter-background" branch 2014-07-14 Andrew P. Fixed: lid state event 2014-07-14 Andrew P. Fixed: possible crash with background=#skip (monitor->background == NULL in this case) 2014-07-14 Andrew P. Individual monitors configurations moved to separate sections ([monitor: name]) 2014-07-04 Andrew P. "active-monitor" property: "#lid" tag has been replaced with "lid-monitor" property; new value - "#cursor" 2014-06-30 Andrew P. One more check for g_hash_table_lookup 2014-06-30 Andrew P. "active-monitor" option: tracking lid state for laptops (dbus and UPower) 2014-06-29 Andrew P. Using GreeterBackground to manage backgrounds 2014-08-07 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-07-13 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-07-12 Andrew P. Show password_entry only if needed 2014-06-27 Olivier Martin Hide password for guest session 2014-07-05 Andrew P. Merge branches by olivier-martin 2014-07-05 Andrew P. Merge "auth-error-message" branch by olivier-martin 2014-06-28 Olivier Martin authentication_complete_cb(): To not overwrite error message from PAM module The error message "Failed to authenticate" was overwritten the PAM error message. PAM error messages are expected to be more informative than Greeter messages. 2014-07-05 Andrew P. Merge "set-message-label-type" branch by olivier-martin 2014-06-27 Olivier Martin set_message_label(): Extended to use the type of the message (ie: INFO or ERROR) 2014-07-05 Andrew P. Merge "null-menu_iter" branch by olivier-martin 2014-06-27 Olivier Martin set_session: Ensure menu_items is not NULL 2014-07-05 Andrew P. Merge "libido version check" branch by olivier-martin 2014-06-27 Olivier Martin libido needs to be 13.10 ido_init() has been introduced into revision 127 (2013-05-31) which corresponds to libido 13.10. 2014-06-20 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-06-14 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-06-09 Andrew P. Updating .glade from previous merge 2014-06-09 Andrew P. Merged "new panel layout" branch 2014-06-08 Andrew P. Using GreeterMenuBar directly in .glade file 2014-06-06 Andrew P. Gtk2 support 2014-06-06 Andrew P. "~text" -> "~~text" 2014-06-05 Andrew P. entry_added() renamed to indicator_entry_added_cb() 2014-05-16 Andrew P. More styling, renaming functions and constants 2014-05-14 Andrew P. GTK2 compatability 2014-05-13 Andrew P. Default "indicators" value, cleanup 2014-05-13 Andrew P. "Hover" effect for indicators (context class) 2014-05-13 Andrew P. New menubar layout 2014-06-06 Andrew P. Merged "layout indicator" branch 2014-05-22 Andrew P. fallback CSS priority 2014-05-21 Andrew P. Theming support 2014-05-19 Andrew P. lightdm-gtk-greeter.css, default style for layout_menuitem 2014-05-13 Andrew P. Using LightDM API by default 2014-05-07 Andrew P. Layouts indicator 2014-06-02 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-05-30 Andrew P. Merged "user-background" branch 2014-03-05 Andrew P. New option: "user-background" 2014-05-14 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-05-13 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-05-11 Simon Steinbeiß Use avatar set in config also without userlist (LP: #1317236) 2014-05-10 Andrew P. Set user image to default value if greeter-hide-users=true 2014-05-10 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-05-04 Sean Davis Update version number 2014-05-02 Sean Davis Update NEWS 2014-05-02 Sean Davis Merged zoomed branch 2014-04-07 Thaddäus Tintenfisch Adjust interpolation type 2014-04-06 Thaddäus Tintenfisch Zoom the background to fit the screen 2014-05-01 Sean Davis Merge set_session_check branch 2014-05-01 Andrew P. Do not treat NULL as valid value 2014-04-30 Andrew P. unnecessary changes, cleanup 2014-04-30 Andrew P. set_session(): checking for invalid value 2014-05-01 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-04-29 Sean Davis Merge get_session fix, update NEWS 2014-04-27 Andrew P. current_session and current_language: g_strdup/g_free fix 2014-04-23 Simon Steinbeiß Fix tooltips stealing the focus (LP: #1307764) 2014-04-23 Andrew P. Fix: tooltips focus 2014-04-17 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-04-13 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-04-12 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-03-31 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-03-30 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-03-29 Sean Davis Update NEWS and version number 2014-03-27 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-03-26 Sean Davis Remove translation template (managed by launchpad), Merge g_unix_signal branch with small fixes 2014-03-26 Simon Steinbeiß Switch from deprecated signal to g_unix_signal_add for proper greeter shutdown (LP #1290575) 2014-03-21 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-03-20 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-03-19 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-03-18 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-03-17 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-03-16 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-03-15 Sean Davis Upload translation template to fix rosetta 2014-03-15 Sean Davis Merge translations 2014-03-15 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-03-15 Sean Davis Update translation templates 2014-03-13 Sean Davis Update NEWS and version number 2014-03-13 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-03-11 Sean Davis Merge Guest Session text, update translation templates 2014-03-02 Gunnar Hjalmarsson Replace the label "Guest Account" with "Guest Session". 2014-03-11 Sean Davis Fix unclean exit, lp: 1290575 2014-03-09 Sean Davis Install sample css into doc folder 2014-03-08 Sean Davis Update translations template 2014-03-05 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-03-04 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-03-02 Sean Davis Update NEWS again 2014-03-02 Sean Davis Update NEWS 2014-03-02 Sean Davis Use the system language by default (LP: #1276072). 2014-03-02 Gunnar Hjalmarsson Use the system language by default (LP: #1276072). 2014-03-02 Sean Davis Increment version number 2014-02-28 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-02-27 Sean Davis Deprecate show-indicators, replace with indicators to improve upgrade path of configuration files pre-1.8 series. 2014-02-25 Andrew P. Replacing "show-indicators" option with "indicators" 2014-02-25 Sean Davis Fix segfault on uninstalled session (fixes fedora: 1002782, possibly lp: 1272910) 2014-02-25 Sean Davis Merge preselection-fix branch by thad-fisch 2014-02-22 Thaddäus Tintenfisch Always update preselected session and language when another user is selected (LP #1282139) 2014-02-25 Sean Davis Merge security fix mlockall by thad-fisch 2014-02-22 Thaddäus Tintenfisch Prevent memory from being swapped out 2014-02-23 Sean Davis Gtk 2/3 fix 2014-02-22 Sean Davis Remove deprecated HButtonBox, fix centering, hide clock when going into large font view 2014-02-22 Sean Davis No default label for clock, homogenous panel, hide clock if panel is too large 2014-02-20 Simon Steinbeiß Add a badge for elementary's pantheon session 2014-02-20 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-02-16 Simon Steinbeiß Revert accidental change of previous commit 2014-02-16 Simon Steinbeiß Let gtk_main exit and shut down the greeter properly 2014-02-15 Simon Steinbeiß Call the clock once at init, so that there's no empty label for 1sec 2014-02-14 Sean Davis Increase clock timeout to 1 second 2014-02-14 Sean Davis Fix CPU hogging of the clock 2014-02-12 Sean Davis Update NEWS and version number 2014-02-12 Sean Davis Add Enter as a means to activate the password entry from the username entry 2014-02-12 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-02-11 Sean Davis Update version number 2014-02-11 Simon Steinbeiß Add sample css file to make life easier for themers 2014-02-11 Sean Davis Update news file 2014-02-09 Sean Davis Add gtk3 style context conditional 2014-02-10 Simon Steinbeiß Add the lightdm-gtk-greeter style-class to all windows of the greeter so that themes can use that as an alternative to the named widgets 2014-02-10 Simon Steinbeiß Never allow the panel-window to be moved via the menubar (in Gtk3) 2014-02-09 Sean Davis Fix crashed with undefined show-indicators setting 2014-02-09 Simon Steinbeiß Further improve Gtk2 login-window padding 2014-02-09 Simon Steinbeiß Fix padding-issue for login-window in Gtk2 2014-02-09 Simon Steinbeiß Rework widget-packing to allow more flexible theming 2014-02-09 Sean Davis Fix loading of indicators, document indicator changes in conf template file 2014-02-09 Sean Davis Merge indicators branch from Andrew P. 2014-02-08 Andrew P. Creating closure only if needed 2014-02-07 Andrew P. Hotkeys to focus menubar, removing actions 2014-02-04 Andrew P. "show-indicators" option - builtin indicators, sorting 2014-01-29 Andrew P. Indicators update 2014-02-09 Sean Davis Restore .conf file I modified 2014-02-09 Sean Davis Merge pam-multiple-prompts branch from Christian Seiler 2014-02-06 Christian Seiler Support multiple prompts in PAM conversation rounds PAM allows for a single round of a conversation to contain multiple prompts. Use case: if a user's password is expired, the Kerberso 5 PAM module, pam_krb5, makes use of PAM's feature to supply multiple prompts in order to ask the user to change their password during the authentication phase (after verification of the old password). This patch changes the show_message_cb and show_prompt_cb signal handlers to record the information in a list of pending prompts and use a central processing function to display one prompt at a time to make multiple prompts work properly. Additionally, for all prompts after the first one, the text accompanying the prompt is used for the message label (unless that has already been filled by a message), so that it is clear to the user for what additional information they are asked. 2014-02-09 Sean Davis Moved badges into own directory, updated makefile to support adding badges without makefile updates 2014-02-07 Simon Steinbeiß Display warning in shutdown/reboot dialog, if there are still users logged in 2014-02-02 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-01-27 Simon Steinbeiß Fix warnings from glade-file and set frame-border to none 2014-01-25 Sean Davis Use proper hint style for full 2014-01-25 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-01-23 Simon Steinbeiß Merge Alt+F4 shortcut for shutdown-dialog and gtkframe as parent for user-image 2014-01-22 Simon Steinbeiß Pack the user-image in a frame to allow theming its border 2014-01-22 Simon Steinbeiß Remove extra signal handler to fix kb-shortcut/action 2014-01-22 Simon Steinbeiß Add Alt+F4 kb-shortcut for shutdown dialog FIXME: currently the dialog has to be cancelled twice 2014-01-22 Simon Steinbeiß Make the screensaver-timeout configurable 2014-01-22 Simon Steinbeiß Set default blank-timeout to 60secs in lock-mode 2014-01-22 Simon Steinbeiß Reset message-label on user-change 2014-01-21 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-01-20 Sean Davis Update version 2014-01-21 Simon Steinbeiß Update NEWS file 2014-01-21 Simon Steinbeiß Check powermenu-items at runtime (LP #1264838) 2014-01-20 Sean Davis Update NEWS 2014-01-20 Sean Davis Fix other gtk3.10 screens issue 2014-01-20 Simon Steinbeiß Merge fix by kalgasnik for offscreen-position 2014-01-20 Andrew P. Fix for offscreen coordinates of login window 2014-01-20 Simon Steinbeiß Make the login-button the default-button 2014-01-20 Sean Davis Fall back for no defined font name 2014-01-17 Simon Steinbeiß Add fallback to setting the language-menuitem 2014-01-17 Simon Steinbeiß Fix previous commit 2014-01-17 Simon Steinbeiß Convert all session-names to lower-case and add lxde badge 2014-01-17 Simon Steinbeiß Add badge for Xfce and fix Ubuntu session badge 2014-01-16 Simon Steinbeiß Use session-badges for the session-menu in Gtk3 document-properties remains as fallback 2014-01-16 Simon Steinbeiß Replace language-menu-icon with language-code-label in the panel 2014-01-16 Simon Steinbeiß Rename gtk3 callbacks from expose to draw to reflect signal-name 2014-01-16 Simon Steinbeiß Fix background drawing with Gtk2 2014-01-15 Simon Steinbeiß Nullify the user-background to fix behavior without fallback-wallpaper 2014-01-15 Simon Steinbeiß Fix deprecated gdk_display_get_n_screens call (by Sean) 2014-01-15 Simon Steinbeiß Draw background into separate window Fixes e.g. nouveau driver having trouble with the root-pixmap-bg TODO: Fix background-pixmap drawing with Gtk2 (currently color-only) 2014-01-14 Simon Steinbeiß Fix language and session menu sensitivity for logged-in users 2014-01-13 Simon Steinbeiß Re/set screensaver-timeout when used as lock-screen 2014-01-13 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2014-01-12 Simon Steinbeiß Fix fake transparency with bg-color 2014-01-10 Sean Davis Fix potential memory leak 2014-01-10 Sean Davis Merge fake_transparency branch 2014-01-09 Simon Steinbeiß Adjust fake transparency to match custom positioning of the login window 2014-01-09 Simon Steinbeiß Don't draw the menubar background separately (fixes highcontrast-option) 2014-01-09 Simon Steinbeiß Redraw the login and panel windows when the background/user is changed 2014-01-08 Sean Davis Fix gdk_window_raise warnings 2014-01-09 Simon Steinbeiß Also draw panel (and menubar) with fake transparency TODO: clean up and simplify drawing code, fix background refreshes/redraws on user-change 2014-01-08 Simon Steinbeiß Clean up Gtk2/3 callbacks and fix crash 2014-01-08 Simon Steinbeiß Use cairo to draw fake transparency underneath the rounded corners in Gtk3 2014-01-09 Sean Davis Merge Ali's clockleak branch 2014-01-09 Alistair Buxton Fix a memory leak in the clock timeout function. 2014-01-08 Sean Davis Reduce redundancy with setting the displayed user, improve tooltip for guest and other 2014-01-07 Sean Davis Cleanup warnings 2014-01-07 Sean Davis Fix value setting/unsetting warnings 2014-01-07 Sean Davis Update NEWS 2014-01-07 Sean Davis Update changelog, lp: 1266449 fixed 2014-01-07 Sean Davis Use g_strcmp0 everywhere 2014-01-07 Simon Steinbeiß Additional definition of the password-entry as invisible in glade-file (Fixes LP #1264771) 2014-01-07 Simon Steinbeiß Correctly display when session is locked (Fix LP #1264563) 2014-01-05 Simon Steinbeiß Apply border-radius property to login_window and the shutdown/restart-dialog in Gtk3 2013-12-31 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-12-27 Sean Davis Fix debian #718497 Last PAM error message not showing 2013-12-27 Sean Davis Increase clock string buffer to 50 characters to fix Debian bug #721510 2013-12-27 Sean Davis Add missed bug fixes 2013-12-27 Sean Davis Update version and NEWS 2013-12-26 Sean Davis Update translations 2013-12-26 Sean Davis Merge focus_fix branch 2013-12-18 Andrew P. Fixed: focus-only-under-mouse bug. Gtk2 version 2013-12-17 Andrew P. Fixed: focus-only-under-mouse bug 2013-12-26 Sean Davis Merge default_avatar_option branch 2013-12-23 Andrew P. New option: "default-user-image" 2013-12-20 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-12-12 Sean Davis Merge user_switching branch 2013-12-02 Andrew P. password_entry/username_entry: user switching with Up/Down keys 2013-12-12 Sean Davis Merge power_dialog_fixes branch 2013-12-02 Andrew P. Power dialogs: centering fixed (broken by "position" option), "escape" press now treats as cancel. 2013-12-07 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-11-30 Sean Davis Fix GTK2 build 2013-11-30 Sean Davis Merge keyboard_spawn_fix branch 2013-11-30 Andrew P. Using 'g_child_watch_add' to handle keyboard terminating event 2013-11-29 Sean Davis Merge background-fixes branch 2013-11-23 Alistair Buxton Fix the rest of the pixmap leaks. 2013-11-23 Alistair Buxton Indentation fixes only. 2013-11-23 Alistair Buxton Implement use of ESETROOT and _XROOTPMAP_ID This prevents the leaking of X client connections every time the background is changed. 2013-11-20 Alistair Buxton Defer set_background() until we know which image to use. 2013-11-19 Alistair Buxton Only call XForceScreenSaver once, from main() 2013-11-29 Sean Davis Merge Onboard-xembed branch 2013-11-24 Andrew P. Run 'onboard' in xembed mode 2013-11-29 Sean Davis Merge Hotkeys branch 2013-11-28 Andrew P. Hotkeys for a11y menu 2013-11-29 Sean Davis Merge positioning branch 2013-11-28 Andrew P. Position option: different default anchors for +/- coordinates 2013-11-24 Andrew P. New option: main window position 2013-11-20 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-11-18 Simon Steinbeiß Fix typo in language-selection-callback 2013-11-13 Simon Steinbeiß Remove the half-hearted libxss dependency check 2013-11-13 Simon Steinbeiß Blank the screen when the greeter is used as unlock-dialog 2013-11-07 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-10-30 Sean Davis Fix Greeter doesn't select user's last session when using Other (lp: #1031421), thanks corsac for the patch! 2013-10-30 Sean Davis Add support for enter key to validate login entry (lp: #1231134) 2013-10-17 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-10-02 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-09-24 Simon Steinbeiß Properly hide languagemenu-menuitem if it's disabled in the config (Fixes LP: #1191509) 2013-09-22 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-09-21 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-09-17 Sean Davis Bump version details 2013-09-17 Sean Davis Fix not a prototype error 2013-09-16 Sean Davis Push ochosi's login fix 2013-06-20 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-06-19 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-06-04 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-06-03 Sean Davis Merge translations 2013-06-02 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-06-03 Sean Davis Update notes and version 2013-06-01 Sean Davis Add widget name back to infobar 2013-06-01 Sean Davis Cleanup unused row in login window 2013-06-01 Sean Davis Fix centering with GTK+3 2013-06-01 Sean Davis GTK+2 infobar compatability 2013-05-27 Sean Davis Center infobar contents 2013-05-27 Simon Steinbeiß Drop name of message_label widget so it gets themed by InfoBar 2013-05-26 Sean Davis Add menubar name back to systray 2013-05-26 Simon Steinbeiß Give the infobar-widget a name for theming compatibility 2013-05-26 Simon Steinbeiß Pack the message_label in a gtk-infobar 2013-05-26 Simon Steinbeiß Fix warnings 2013-05-21 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-05-19 Simon Steinbeiß Add tooltip on user-combobox that shows username 2013-05-18 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-05-13 Sean Davis Cleanup conf file 2013-05-13 Sean Davis Update version number for release 2013-05-12 Sean Davis Change shutdown and restart cancel button to Cancel 2013-05-12 Sean Davis Set name for return to login button to cancel_button, rename logo to user_image 2013-05-12 Sean Davis Name shutdown and restart buttons 2013-05-12 Sean Davis Update NEWS 2013-05-12 Sean Davis make update-po 2013-05-12 Sean Davis Rename menubar and shutdown/restart widgets, improve dialog code a bit 2013-05-11 Sean Davis Some initial cleanup, improve variable names, standardize spacing 2013-05-10 Sean Davis Do not automatically show keyboard 2013-05-10 Simon Steinbeiss Re-add widget-names to glade file to allow proper theming 2013-05-10 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-05-09 Sean Davis Translations update merge 2013-05-09 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-05-09 Sean Davis Allow proper positioning of onboard keyboard 2013-05-08 Sean Davis Add initial support for on-screen keyboard 2013-05-08 Sean Davis Update changelog, make update-po 2013-05-07 Sean Davis Replace Shutdown/shutdown strings in po files to make translations stay the same. 2013-05-07 Sean Davis Use Shut Down instead of shutdown 2013-05-07 Sean Davis Add primary/secondary text and padding to shutdown/restart dialogs 2013-05-07 Sean Davis Use zoom for wallpaper scaling, use non-symbolic restart/shutdown icons for GTK2 2013-05-06 Sean Davis Add login window theming and icons to shutdown and restart. 2013-04-26 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-03-24 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-03-21 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-03-17 Sean Davis Merge lp:~smd-seandavis/lightdm-gtk-greeter/ui-refresh 2013-03-17 Sean Davis Add default clock settings. 2013-03-17 Sean Davis Clean up theme template 2013-03-17 Sean Davis Fix tab order, include panel menubar in tab order 2013-03-17 Sean Davis Use menubar styling across panel by default 2013-03-17 Sean Davis Use symbolic icons, hide resize grip on panel window. 2013-03-15 Sean Davis Fix GTK+2 compatability. 2013-03-15 Sean Davis Fallback on first user if previous user is not found. 2013-03-15 Sean Davis Cleanup and make other login operable. 2013-03-15 Sean Davis Add username entry for other. 2013-03-15 Sean Davis Make menu items sensitive when not logged in 2013-03-15 Sean Davis Add configuration for clock 2013-03-15 Sean Davis Remove deprecated gdk_thread functions from gtk3 code. 2013-03-15 Sean Davis Add x-padding to the hostname 2013-03-14 Sean Davis Addition of basic clock. 2013-03-14 Sean Davis Add support for gtk2 compilation, but current implementation crashes with gtk2 2013-03-14 Sean Davis Code cleanup, get rid of useless boxes as well. 2013-03-14 Sean Davis Simplify and improve user avatar loading. 2013-03-14 Sean Davis Fix menu callbacks 2013-03-14 Sean Davis Fixed menus 2013-03-14 Sean Davis Simplify loops, fix language code. 2013-03-14 Sean Davis Almost there, but this commit does not load session. 2013-03-13 Sean Davis Remove references to non-existent widgets, add hostname label back. 2013-03-13 Sean Davis Fix bad merge 2013-03-13 Sean Davis Merge ochosi branch 2013-02-06 Simon Steinbeiß Add rounded corners to the loginbox, clean up the glade file, move the session- and language-combos to menus TODO: clean up dropped widgets from .c (prompt_box, login_box), make session- and language-menu work as they should (modify callbacks) 2013-02-01 Simon Steinbeiß Scale the avatar to 64x64px 2013-02-01 Simon Steinbeiß Load logo-widget from builder to actually be able to show avatar 2013-01-31 Simon Steinbeiß Update glade file and add avatar-support to the greeter 2013-03-14 Simon Steinbeiß Add todo-list for upcoming UI changes 2013-03-09 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-03-01 Simon Steinbeiß Add rounded corners to the login_window widget 2013-02-18 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-02-10 Lionel Le Folgoc Merge 78..81 from 1.6 2013-02-10 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-02-10 Lionel Le Folgoc Update NEWS for a missing item and fix a typo 2013-02-10 Lionel Le Folgoc Reintroduce gtk2 support With a configure flag (--with-gtk2). This will also switch to the gtk2 build of libindicator. Based on a patch received during FOSDEM… I think. 2013-02-09 Lionel Le Folgoc Slightly improve user avatar handling 2013-02-09 Lionel Le Folgoc Make update-po 2013-02-09 Lionel Le Folgoc Fix incomplete previous commit 2013-02-02 Simon Steinbeiß Change button-label from 'Login' to 'Log In' 2013-02-02 Simon Steinbeiß Add support for the user-avatar 2013-02-02 Simon Steinbeiß Fix background-display when picture has no alpha channel (LP: #1086199) 2013-01-30 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-01-29 Lionel Le Folgoc update po 2013-01-29 Lionel Le Folgoc Update po (I'm fairly sure launchpad is going to overwrite everything tonight, isn't that funny) 2013-01-29 Lionel Le Folgoc Compile-in the glade file (so that a missing ui file won't crash the greeter anymore) Also improve a bit the autofoo stuff 2013-01-28 Lionel Le Folgoc Make indicators actually show up in the top panel 2013-01-28 Lionel Le Folgoc IndicatorObjectEntry is not a GObject, so do the same as indicator-applet 2013-01-28 Lionel Le Folgoc resync changelog with current dev release 2013-01-28 Lionel Le Folgoc Add experimental libindicator support (untested due to a lack of Ubuntu system for now :) 2013-01-25 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2013-01-24 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-12-19 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-10-29 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-10-22 Lionel Le Folgoc drop useless rule 2012-10-22 Lionel Le Folgoc Generate a proper changelog during dist 2012-10-22 Lionel Le Folgoc Fix previous commit 2012-10-21 Lionel Le Folgoc Add basic support for user background 2012-10-21 Lionel Le Folgoc Use new api for autologin 2012-09-05 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-09-03 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-08-31 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-08-30 Lionel Le Folgoc Prepare 1.3.1 2012-08-30 Lionel Le Folgoc update fr.po 2012-08-30 Lionel Le Folgoc make update-po 2012-08-30 Lionel Le Folgoc Force refreshing the prompt_box for "Other" after cancel is pressed (so the ui isn't stuck with a broken password prompt when it should be the username prompt) 2012-08-30 Lionel Le Folgoc Hide the Cancel button, useless with the normal combobox (it's still displayed when the user list is disabled or when "Other" is selected) 2012-08-30 Lionel Le Folgoc Don't hide the login box when cancel is pressed 2012-08-30 Lionel Le Folgoc Rename the 'Login' button to 'Unlock' when the user is already logged in 2012-08-30 Lionel Le Folgoc Drop custom icons now that there's a config option for the icon theme 2012-08-30 Lionel Le Folgoc Fix FTBFS when built twice in a row 2012-08-23 Lionel Le Folgoc Prepare 1.3.0 2012-08-23 Lionel Le Folgoc refresh po/LINGUAS, useless lp doesn't do it 2012-08-23 Lionel Le Folgoc remove duplicated comment 2012-08-05 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-07-31 Lionel Le Folgoc remember the last session used 2012-07-31 Lionel Le Folgoc use a known icon name for the accessibility menu 2012-07-31 Lionel Le Folgoc add config option to set the icon theme 2012-07-31 Lionel Le Folgoc Add a config option to set the path to the logo image 2012-07-31 Lionel Le Folgoc include patch from the ubuntu package 2012-07-28 Lionel Le Folgoc Replace the userlist's treeview with a combobox And drop the unused pixbuf 2012-07-28 Lionel Le Folgoc Add names to widgets to ease theming 2012-07-28 Lionel Le Folgoc Properly center the login window after a resize (Thanks Esko Järnfors for the patch) 2012-07-28 Lionel Le Folgoc Revert "Add the possibilty to specify another greeter.ui path in the configuration file" We're discussing a better method to make both lubuntu and xubuntu happy with that. 2012-07-23 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-07-15 Julien Lavergne Add the possibilty to specify another greeter.ui path in the configuration file 2012-07-15 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-07-14 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-05-29 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-05-21 Lionel Le Folgoc Prepare for 1.1.6 2012-05-21 Lionel Le Folgoc add missing include for setlocale 2012-05-21 Lionel Le Folgoc fix Cancel button action, and clear the error label 2012-05-21 Lionel Le Folgoc fix 'Large Font' option for fontnames containing spaces 2012-05-13 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-04-27 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-04-22 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-04-21 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-04-05 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-04-04 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-04-03 Lionel Le Folgoc prepare for 1.1.5 2012-03-23 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-03-21 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-03-20 Launchpad Translations on behalf of lightdm-gtk-greeter-team Launchpad automatic translations update. 2012-02-10 Robert Ancell Releasing 1.1.4 2012-02-10 Robert Ancell Load greeter configuration from correct directory 2012-02-01 Robert Ancell Bump version number 2012-02-01 Robert Ancell Fix greeter looking for data in the wrong directory 2012-01-31 Robert Ancell Bump version number 2012-01-31 Robert Ancell Remove deprecated GTK+ functions 2012-01-31 Robert Ancell Correctly link against libX11 2012-01-12 Robert Ancell Releasing 1.1.1 2012-01-12 Robert Ancell Translate login prompts using the translations from PAM 2012-01-06 Gunnar Hjalmarsson Enable translation of prompt_label (LP: #897166). 2011-11-29 Gunnar Hjalmarsson Language chooser modifications: * Handle @variants properly. * Prevent locales from appearing twice in the language chooser. 2011-11-29 Robert Ancell Update translation files removing translations that were not part of the GTK greeter 2011-11-29 Robert Ancell Add LINGUAS file 2011-11-29 Robert Ancell Copy over translations 2011-11-29 Robert Ancell Split lightdm-gtk-greeter out of lightdm lightdm-gtk-greeter-2.0.5/lightdm-gtk-greeter.doap0000664000175000017500000000165413243241724024103 0ustar00bluesabrebluesabre00000000000000 lightdm-gtk-greeter LightDM GTK+ Greeter Robert Ancell rancell lightdm-gtk-greeter-2.0.5/missing0000755000175000017500000001533013253544551020766 0ustar00bluesabrebluesabre00000000000000#! /bin/sh # Common wrapper for a few potentially missing GNU programs. scriptversion=2013-10-28.13; # UTC # Copyright (C) 1996-2014 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try '$0 --help' for more information" exit 1 fi case $1 in --is-lightweight) # Used by our autoconf macros to check whether the available missing # script is modern enough. exit 0 ;; --run) # Back-compat with the calling convention used by older automake. shift ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit Supported PROGRAM values: aclocal autoconf autoheader autom4te automake makeinfo bison yacc flex lex help2man Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and 'g' are ignored when checking the name. Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: unknown '$1' option" echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac # Run the given program, remember its exit status. "$@"; st=$? # If it succeeded, we are done. test $st -eq 0 && exit 0 # Also exit now if we it failed (or wasn't found), and '--version' was # passed; such an option is passed most likely to detect whether the # program is present and works. case $2 in --version|--help) exit $st;; esac # Exit code 63 means version mismatch. This often happens when the user # tries to use an ancient version of a tool on a file that requires a # minimum version. if test $st -eq 63; then msg="probably too old" elif test $st -eq 127; then # Program was missing. msg="missing on your system" else # Program was found and executed, but failed. Give up. exit $st fi perl_URL=http://www.perl.org/ flex_URL=http://flex.sourceforge.net/ gnu_software_URL=http://www.gnu.org/software program_details () { case $1 in aclocal|automake) echo "The '$1' program is part of the GNU Automake package:" echo "<$gnu_software_URL/automake>" echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/autoconf>" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; autoconf|autom4te|autoheader) echo "The '$1' program is part of the GNU Autoconf package:" echo "<$gnu_software_URL/autoconf/>" echo "It also requires GNU m4 and Perl in order to run:" echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; esac } give_advice () { # Normalize program name to check for. normalized_program=`echo "$1" | sed ' s/^gnu-//; t s/^gnu//; t s/^g//; t'` printf '%s\n' "'$1' is $msg." configure_deps="'configure.ac' or m4 files included by 'configure.ac'" case $normalized_program in autoconf*) echo "You should only need it if you modified 'configure.ac'," echo "or m4 files included by it." program_details 'autoconf' ;; autoheader*) echo "You should only need it if you modified 'acconfig.h' or" echo "$configure_deps." program_details 'autoheader' ;; automake*) echo "You should only need it if you modified 'Makefile.am' or" echo "$configure_deps." program_details 'automake' ;; aclocal*) echo "You should only need it if you modified 'acinclude.m4' or" echo "$configure_deps." program_details 'aclocal' ;; autom4te*) echo "You might have modified some maintainer files that require" echo "the 'autom4te' program to be rebuilt." program_details 'autom4te' ;; bison*|yacc*) echo "You should only need it if you modified a '.y' file." echo "You may want to install the GNU Bison package:" echo "<$gnu_software_URL/bison/>" ;; lex*|flex*) echo "You should only need it if you modified a '.l' file." echo "You may want to install the Fast Lexical Analyzer package:" echo "<$flex_URL>" ;; help2man*) echo "You should only need it if you modified a dependency" \ "of a man page." echo "You may want to install the GNU Help2man package:" echo "<$gnu_software_URL/help2man/>" ;; makeinfo*) echo "You should only need it if you modified a '.texi' file, or" echo "any other file indirectly affecting the aspect of the manual." echo "You might want to install the Texinfo package:" echo "<$gnu_software_URL/texinfo/>" echo "The spurious makeinfo call might also be the consequence of" echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" echo "want to install GNU make:" echo "<$gnu_software_URL/make/>" ;; *) echo "You might have modified some files without having the proper" echo "tools for further handling them. Check the 'README' file, it" echo "often tells you about the needed prerequisites for installing" echo "this package. You may also peek at any GNU archive site, in" echo "case some other package contains this missing '$1' program." ;; esac } give_advice "$1" | sed -e '1s/^/WARNING: /' \ -e '2,$s/^/ /' >&2 # Propagate the correct exit status (expected to be 127 for a program # not found, 63 for a program that failed due to version mismatch). exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: lightdm-gtk-greeter-2.0.5/m4/0000775000175000017500000000000013253545066017711 5ustar00bluesabrebluesabre00000000000000lightdm-gtk-greeter-2.0.5/m4/lt~obsolete.m40000644000175000017500000001377413253544546022541 0ustar00bluesabrebluesabre00000000000000# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- # # Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software # Foundation, Inc. # Written by Scott James Remnant, 2004. # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 5 lt~obsolete.m4 # These exist entirely to fool aclocal when bootstrapping libtool. # # In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN), # which have later been changed to m4_define as they aren't part of the # exported API, or moved to Autoconf or Automake where they belong. # # The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN # in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us # using a macro with the same name in our local m4/libtool.m4 it'll # pull the old libtool.m4 in (it doesn't see our shiny new m4_define # and doesn't know about Autoconf macros at all.) # # So we provide this file, which has a silly filename so it's always # included after everything else. This provides aclocal with the # AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything # because those macros already exist, or will be overwritten later. # We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. # # Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. # Yes, that means every name once taken will need to remain here until # we give up compatibility with versions before 1.7, at which point # we need to keep only those names which we still refer to. # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) lightdm-gtk-greeter-2.0.5/m4/ltversion.m40000644000175000017500000000127313253544546022203 0ustar00bluesabrebluesabre00000000000000# ltversion.m4 -- version numbers -*- Autoconf -*- # # Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # @configure_input@ # serial 4179 ltversion.m4 # This file is part of GNU Libtool m4_define([LT_PACKAGE_VERSION], [2.4.6]) m4_define([LT_PACKAGE_REVISION], [2.4.6]) AC_DEFUN([LTVERSION_VERSION], [macro_version='2.4.6' macro_revision='2.4.6' _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) _LT_DECL(, macro_revision, 0) ]) lightdm-gtk-greeter-2.0.5/m4/pkg.m40000644000175000017500000002401113243246347020727 0ustar00bluesabrebluesabre00000000000000dnl pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- dnl serial 11 (pkg-config-0.29.1) dnl dnl Copyright © 2004 Scott James Remnant . dnl Copyright © 2012-2015 Dan Nicholson dnl dnl This program is free software; you can redistribute it and/or modify dnl it under the terms of the GNU General Public License as published by dnl the Free Software Foundation; either version 2 of the License, or dnl (at your option) any later version. dnl dnl This program is distributed in the hope that it will be useful, but dnl WITHOUT ANY WARRANTY; without even the implied warranty of dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU dnl General Public License for more details. dnl dnl You should have received a copy of the GNU General Public License dnl along with this program; if not, write to the Free Software dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA dnl 02111-1307, USA. dnl dnl As a special exception to the GNU General Public License, if you dnl distribute this file as part of a program that contains a dnl configuration script generated by Autoconf, you may include it under dnl the same distribution terms that you use for the rest of that dnl program. dnl PKG_PREREQ(MIN-VERSION) dnl ----------------------- dnl Since: 0.29 dnl dnl Verify that the version of the pkg-config macros are at least dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's dnl installed version of pkg-config, this checks the developer's version dnl of pkg.m4 when generating configure. dnl dnl To ensure that this macro is defined, also add: dnl m4_ifndef([PKG_PREREQ], dnl [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])]) dnl dnl See the "Since" comment for each macro you use to see what version dnl of the macros you require. m4_defun([PKG_PREREQ], [m4_define([PKG_MACROS_VERSION], [0.29.1]) m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1, [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])]) ])dnl PKG_PREREQ dnl PKG_PROG_PKG_CONFIG([MIN-VERSION]) dnl ---------------------------------- dnl Since: 0.16 dnl dnl Search for the pkg-config tool and set the PKG_CONFIG variable to dnl first found in the path. Checks that the version of pkg-config found dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is dnl used since that's the first version where most current features of dnl pkg-config existed. AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) fi if test -n "$PKG_CONFIG"; then _pkg_min_version=m4_default([$1], [0.9.0]) AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) PKG_CONFIG="" fi fi[]dnl ])dnl PKG_PROG_PKG_CONFIG dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) dnl ------------------------------------------------------------------- dnl Since: 0.18 dnl dnl Check to see whether a particular set of modules exists. Similar to dnl PKG_CHECK_MODULES(), but does not set variables or print errors. dnl dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) dnl only at the first occurence in configure.ac, so if the first place dnl it's called might be skipped (such as if it is within an "if", you dnl have to call PKG_CHECK_EXISTS manually AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl if test -n "$PKG_CONFIG" && \ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then m4_default([$2], [:]) m4_ifvaln([$3], [else $3])dnl fi]) dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) dnl --------------------------------------------- dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting dnl pkg_failed based on the result. m4_define([_PKG_CONFIG], [if test -n "$$1"; then pkg_cv_[]$1="$$1" elif test -n "$PKG_CONFIG"; then PKG_CHECK_EXISTS([$3], [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes ], [pkg_failed=yes]) else pkg_failed=untried fi[]dnl ])dnl _PKG_CONFIG dnl _PKG_SHORT_ERRORS_SUPPORTED dnl --------------------------- dnl Internal check to see if pkg-config supports short errors. AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi[]dnl ])dnl _PKG_SHORT_ERRORS_SUPPORTED dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], dnl [ACTION-IF-NOT-FOUND]) dnl -------------------------------------------------------------- dnl Since: 0.4.0 dnl dnl Note that if there is a possibility the first call to dnl PKG_CHECK_MODULES might not happen, you should be sure to include an dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl pkg_failed=no AC_MSG_CHECKING([for $1]) _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) _PKG_CONFIG([$1][_LIBS], [libs], [$2]) m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS and $1[]_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.]) if test $pkg_failed = yes; then AC_MSG_RESULT([no]) _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` else $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD m4_default([$4], [AC_MSG_ERROR( [Package requirements ($2) were not met: $$1_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. _PKG_TEXT])[]dnl ]) elif test $pkg_failed = untried; then AC_MSG_RESULT([no]) m4_default([$4], [AC_MSG_FAILURE( [The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. _PKG_TEXT To get pkg-config, see .])[]dnl ]) else $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS $1[]_LIBS=$pkg_cv_[]$1[]_LIBS AC_MSG_RESULT([yes]) $3 fi[]dnl ])dnl PKG_CHECK_MODULES dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], dnl [ACTION-IF-NOT-FOUND]) dnl --------------------------------------------------------------------- dnl Since: 0.29 dnl dnl Checks for existence of MODULES and gathers its build flags with dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags dnl and VARIABLE-PREFIX_LIBS from --libs. dnl dnl Note that if there is a possibility the first call to dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to dnl include an explicit call to PKG_PROG_PKG_CONFIG in your dnl configure.ac. AC_DEFUN([PKG_CHECK_MODULES_STATIC], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl _save_PKG_CONFIG=$PKG_CONFIG PKG_CONFIG="$PKG_CONFIG --static" PKG_CHECK_MODULES($@) PKG_CONFIG=$_save_PKG_CONFIG[]dnl ])dnl PKG_CHECK_MODULES_STATIC dnl PKG_INSTALLDIR([DIRECTORY]) dnl ------------------------- dnl Since: 0.27 dnl dnl Substitutes the variable pkgconfigdir as the location where a module dnl should install pkg-config .pc files. By default the directory is dnl $libdir/pkgconfig, but the default can be changed by passing dnl DIRECTORY. The user can override through the --with-pkgconfigdir dnl parameter. AC_DEFUN([PKG_INSTALLDIR], [m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])]) m4_pushdef([pkg_description], [pkg-config installation directory @<:@]pkg_default[@:>@]) AC_ARG_WITH([pkgconfigdir], [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],, [with_pkgconfigdir=]pkg_default) AC_SUBST([pkgconfigdir], [$with_pkgconfigdir]) m4_popdef([pkg_default]) m4_popdef([pkg_description]) ])dnl PKG_INSTALLDIR dnl PKG_NOARCH_INSTALLDIR([DIRECTORY]) dnl -------------------------------- dnl Since: 0.27 dnl dnl Substitutes the variable noarch_pkgconfigdir as the location where a dnl module should install arch-independent pkg-config .pc files. By dnl default the directory is $datadir/pkgconfig, but the default can be dnl changed by passing DIRECTORY. The user can override through the dnl --with-noarch-pkgconfigdir parameter. AC_DEFUN([PKG_NOARCH_INSTALLDIR], [m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])]) m4_pushdef([pkg_description], [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@]) AC_ARG_WITH([noarch-pkgconfigdir], [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],, [with_noarch_pkgconfigdir=]pkg_default) AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir]) m4_popdef([pkg_default]) m4_popdef([pkg_description]) ])dnl PKG_NOARCH_INSTALLDIR dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE, dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) dnl ------------------------------------------- dnl Since: 0.28 dnl dnl Retrieves the value of the pkg-config variable for the given module. AC_DEFUN([PKG_CHECK_VAR], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl _PKG_CONFIG([$1], [variable="][$3]["], [$2]) AS_VAR_COPY([$1], [pkg_cv_][$1]) AS_VAR_IF([$1], [""], [$5], [$4])dnl ])dnl PKG_CHECK_VAR lightdm-gtk-greeter-2.0.5/m4/lib-ld.m40000644000175000017500000000714313243246347021320 0ustar00bluesabrebluesabre00000000000000# lib-ld.m4 serial 6 dnl Copyright (C) 1996-2003, 2009-2016 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl Subroutines of libtool.m4, dnl with replacements s/_*LT_PATH/AC_LIB_PROG/ and s/lt_/acl_/ to avoid dnl collision with libtool.m4. dnl From libtool-2.4. Sets the variable with_gnu_ld to yes or no. AC_DEFUN([AC_LIB_PROG_LD_GNU], [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld], [# I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 /dev/null 2>&1 \ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ || PATH_SEPARATOR=';' } fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]]* | ?:[[\\/]]*) re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the pathname of ld ac_prog=`echo "$ac_prog"| sed 's%\\\\%/%g'` while echo "$ac_prog" | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL([acl_cv_path_LD], [if test -z "$LD"; then acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$acl_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then acl_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$acl_cv_path_LD" -v 2>&1 , 1995-2000. dnl Bruno Haible , 2000-2003. AC_PREREQ([2.60]) dnl Checks for all prerequisites of the po subdirectory. AC_DEFUN([AM_PO_SUBDIRS], [ AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl AC_REQUIRE([AC_PROG_SED])dnl AC_REQUIRE([AM_NLS])dnl dnl Release version of the gettext macros. This is used to ensure that dnl the gettext macros and po/Makefile.in.in are in sync. AC_SUBST([GETTEXT_MACRO_VERSION], [0.19]) dnl Perform the following tests also if --disable-nls has been given, dnl because they are needed for "make dist" to work. dnl Search for GNU msgfmt in the PATH. dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions. dnl The second test excludes FreeBSD msgfmt. AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], :) AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT]) dnl Test whether it is GNU msgfmt >= 0.15. changequote(,)dnl case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; *) MSGFMT_015=$MSGFMT ;; esac changequote([,])dnl AC_SUBST([MSGFMT_015]) changequote(,)dnl case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; *) GMSGFMT_015=$GMSGFMT ;; esac changequote([,])dnl AC_SUBST([GMSGFMT_015]) dnl Search for GNU xgettext 0.12 or newer in the PATH. dnl The first test excludes Solaris xgettext and early GNU xgettext versions. dnl The second test excludes FreeBSD xgettext. AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], :) dnl Remove leftover from FreeBSD xgettext call. rm -f messages.po dnl Test whether it is GNU xgettext >= 0.15. changequote(,)dnl case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; *) XGETTEXT_015=$XGETTEXT ;; esac changequote([,])dnl AC_SUBST([XGETTEXT_015]) dnl Search for GNU msgmerge 0.11 or newer in the PATH. AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge, [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :) dnl Installation directories. dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we dnl have to define it here, so that it can be used in po/Makefile. test -n "$localedir" || localedir='${datadir}/locale' AC_SUBST([localedir]) dnl Support for AM_XGETTEXT_OPTION. test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= AC_SUBST([XGETTEXT_EXTRA_OPTIONS]) AC_CONFIG_COMMANDS([po-directories], [[ for ac_file in $CONFIG_FILES; do # Support "outfile[:infile[:infile...]]" case "$ac_file" in *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; esac # PO directories have a Makefile.in generated from Makefile.in.in. case "$ac_file" in */Makefile.in) # Adjust a relative srcdir. ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'` ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` # In autoconf-2.13 it is called $ac_given_srcdir. # In autoconf-2.50 it is called $srcdir. test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" case "$ac_given_srcdir" in .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; /*) top_srcdir="$ac_given_srcdir" ;; *) top_srcdir="$ac_dots$ac_given_srcdir" ;; esac # Treat a directory as a PO directory if and only if it has a # POTFILES.in file. This allows packages to have multiple PO # directories under different names or in different locations. if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then rm -f "$ac_dir/POTFILES" test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" gt_tab=`printf '\t'` cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" POMAKEFILEDEPS="POTFILES.in" # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend # on $ac_dir but don't depend on user-specified configuration # parameters. if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then # The LINGUAS file contains the set of available languages. if test -n "$OBSOLETE_ALL_LINGUAS"; then test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" fi ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` # Hide the ALL_LINGUAS assignment from automake < 1.5. eval 'ALL_LINGUAS''=$ALL_LINGUAS_' POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" else # The set of available languages was given in configure.in. # Hide the ALL_LINGUAS assignment from automake < 1.5. eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' fi # Compute POFILES # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) # Compute UPDATEPOFILES # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) # Compute DUMMYPOFILES # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) # Compute GMOFILES # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) case "$ac_given_srcdir" in .) srcdirpre= ;; *) srcdirpre='$(srcdir)/' ;; esac POFILES= UPDATEPOFILES= DUMMYPOFILES= GMOFILES= for lang in $ALL_LINGUAS; do POFILES="$POFILES $srcdirpre$lang.po" UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" DUMMYPOFILES="$DUMMYPOFILES $lang.nop" GMOFILES="$GMOFILES $srcdirpre$lang.gmo" done # CATALOGS depends on both $ac_dir and the user's LINGUAS # environment variable. INST_LINGUAS= if test -n "$ALL_LINGUAS"; then for presentlang in $ALL_LINGUAS; do useit=no if test "%UNSET%" != "$LINGUAS"; then desiredlanguages="$LINGUAS" else desiredlanguages="$ALL_LINGUAS" fi for desiredlang in $desiredlanguages; do # Use the presentlang catalog if desiredlang is # a. equal to presentlang, or # b. a variant of presentlang (because in this case, # presentlang can be used as a fallback for messages # which are not translated in the desiredlang catalog). case "$desiredlang" in "$presentlang"*) useit=yes;; esac done if test $useit = yes; then INST_LINGUAS="$INST_LINGUAS $presentlang" fi done fi CATALOGS= if test -n "$INST_LINGUAS"; then for lang in $INST_LINGUAS; do CATALOGS="$CATALOGS $lang.gmo" done fi test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do if test -f "$f"; then case "$f" in *.orig | *.bak | *~) ;; *) cat "$f" >> "$ac_dir/Makefile" ;; esac fi done fi ;; esac done]], [# Capture the value of obsolete ALL_LINGUAS because we need it to compute # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it # from automake < 1.5. eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' # Capture the value of LINGUAS because we need it to compute CATALOGS. LINGUAS="${LINGUAS-%UNSET%}" ]) ]) dnl Postprocesses a Makefile in a directory containing PO files. AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE], [ # When this code is run, in config.status, two variables have already been # set: # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in, # - LINGUAS is the value of the environment variable LINGUAS at configure # time. changequote(,)dnl # Adjust a relative srcdir. ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'` ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` # In autoconf-2.13 it is called $ac_given_srcdir. # In autoconf-2.50 it is called $srcdir. test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" case "$ac_given_srcdir" in .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; /*) top_srcdir="$ac_given_srcdir" ;; *) top_srcdir="$ac_dots$ac_given_srcdir" ;; esac # Find a way to echo strings without interpreting backslash. if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then gt_echo='echo' else if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then gt_echo='printf %s\n' else echo_func () { cat < "$ac_file.tmp" tab=`printf '\t'` if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then # Add dependencies that cannot be formulated as a simple suffix rule. for lang in $ALL_LINGUAS; do frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'` cat >> "$ac_file.tmp" < /dev/null; then # Add dependencies that cannot be formulated as a simple suffix rule. for lang in $ALL_LINGUAS; do frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'` cat >> "$ac_file.tmp" <> "$ac_file.tmp" < 3]), [1], [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl [[m4_foreach([_Lt_prefix], [$2], [m4_foreach([_Lt_suffix], ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) # lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) # ----------------------------------------------------------------------- # Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited # by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. m4_define([lt_if_append_uniq], [m4_ifdef([$1], [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], [lt_append([$1], [$2], [$3])$4], [$5])], [lt_append([$1], [$2], [$3])$4])]) # lt_dict_add(DICT, KEY, VALUE) # ----------------------------- m4_define([lt_dict_add], [m4_define([$1($2)], [$3])]) # lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) # -------------------------------------------- m4_define([lt_dict_add_subkey], [m4_define([$1($2:$3)], [$4])]) # lt_dict_fetch(DICT, KEY, [SUBKEY]) # ---------------------------------- m4_define([lt_dict_fetch], [m4_ifval([$3], m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) # lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) # ----------------------------------------------------------------- m4_define([lt_if_dict_fetch], [m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], [$5], [$6])]) # lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) # -------------------------------------------------------------- m4_define([lt_dict_filter], [m4_if([$5], [], [], [lt_join(m4_quote(m4_default([$4], [[, ]])), lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl ]) lightdm-gtk-greeter-2.0.5/m4/lib-link.m40000644000175000017500000010044313243246347021653 0ustar00bluesabrebluesabre00000000000000# lib-link.m4 serial 26 (gettext-0.18.2) dnl Copyright (C) 2001-2016 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl From Bruno Haible. AC_PREREQ([2.54]) dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and dnl the libraries corresponding to explicit and implicit dependencies. dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and dnl augments the CPPFLAGS variable. dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. AC_DEFUN([AC_LIB_LINKFLAGS], [ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) pushdef([Name],[m4_translit([$1],[./+-], [____])]) pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ AC_LIB_LINKFLAGS_BODY([$1], [$2]) ac_cv_lib[]Name[]_libs="$LIB[]NAME" ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" ac_cv_lib[]Name[]_cppflags="$INC[]NAME" ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX" ]) LIB[]NAME="$ac_cv_lib[]Name[]_libs" LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" INC[]NAME="$ac_cv_lib[]Name[]_cppflags" LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix" AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) AC_SUBST([LIB]NAME) AC_SUBST([LTLIB]NAME) AC_SUBST([LIB]NAME[_PREFIX]) dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the dnl results of this search when this library appears as a dependency. HAVE_LIB[]NAME=yes popdef([NAME]) popdef([Name]) ]) dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message]) dnl searches for libname and the libraries corresponding to explicit and dnl implicit dependencies, together with the specified include files and dnl the ability to compile and link the specified testcode. The missing-message dnl defaults to 'no' and may contain additional hints for the user. dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], [ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) pushdef([Name],[m4_translit([$1],[./+-], [____])]) pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME dnl accordingly. AC_LIB_LINKFLAGS_BODY([$1], [$2]) dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, dnl because if the user has installed lib[]Name and not disabled its use dnl via --without-lib[]Name-prefix, he wants to use it. ac_save_CPPFLAGS="$CPPFLAGS" AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ ac_save_LIBS="$LIBS" dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS, dnl because these -l options might require -L options that are present in dnl LIBS. -l options benefit only from the -L options listed before it. dnl Otherwise, add it to the front of LIBS, because it may be a static dnl library that depends on another static library that is present in LIBS. dnl Static libraries benefit only from the static libraries listed after dnl it. case " $LIB[]NAME" in *" -l"*) LIBS="$LIBS $LIB[]NAME" ;; *) LIBS="$LIB[]NAME $LIBS" ;; esac AC_LINK_IFELSE( [AC_LANG_PROGRAM([[$3]], [[$4]])], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])']) LIBS="$ac_save_LIBS" ]) if test "$ac_cv_lib[]Name" = yes; then HAVE_LIB[]NAME=yes AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.]) AC_MSG_CHECKING([how to link with lib[]$1]) AC_MSG_RESULT([$LIB[]NAME]) else HAVE_LIB[]NAME=no dnl If $LIB[]NAME didn't lead to a usable library, we don't need dnl $INC[]NAME either. CPPFLAGS="$ac_save_CPPFLAGS" LIB[]NAME= LTLIB[]NAME= LIB[]NAME[]_PREFIX= fi AC_SUBST([HAVE_LIB]NAME) AC_SUBST([LIB]NAME) AC_SUBST([LTLIB]NAME) AC_SUBST([LIB]NAME[_PREFIX]) popdef([NAME]) popdef([Name]) ]) dnl Determine the platform dependent parameters needed to use rpath: dnl acl_libext, dnl acl_shlibext, dnl acl_libname_spec, dnl acl_library_names_spec, dnl acl_hardcode_libdir_flag_spec, dnl acl_hardcode_libdir_separator, dnl acl_hardcode_direct, dnl acl_hardcode_minus_L. AC_DEFUN([AC_LIB_RPATH], [ dnl Tell automake >= 1.10 to complain if config.rpath is missing. m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])]) AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh . ./conftest.sh rm -f ./conftest.sh acl_cv_rpath=done ]) wl="$acl_cv_wl" acl_libext="$acl_cv_libext" acl_shlibext="$acl_cv_shlibext" acl_libname_spec="$acl_cv_libname_spec" acl_library_names_spec="$acl_cv_library_names_spec" acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" acl_hardcode_direct="$acl_cv_hardcode_direct" acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" dnl Determine whether the user wants rpath handling at all. AC_ARG_ENABLE([rpath], [ --disable-rpath do not hardcode runtime library paths], :, enable_rpath=yes) ]) dnl AC_LIB_FROMPACKAGE(name, package) dnl declares that libname comes from the given package. The configure file dnl will then not have a --with-libname-prefix option but a dnl --with-package-prefix option. Several libraries can come from the same dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar dnl macro call that searches for libname. AC_DEFUN([AC_LIB_FROMPACKAGE], [ pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) define([acl_frompackage_]NAME, [$2]) popdef([NAME]) pushdef([PACK],[$2]) pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) define([acl_libsinpackage_]PACKUP, m4_ifdef([acl_libsinpackage_]PACKUP, [m4_defn([acl_libsinpackage_]PACKUP)[, ]],)[lib$1]) popdef([PACKUP]) popdef([PACK]) ]) dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and dnl the libraries corresponding to explicit and implicit dependencies. dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem. AC_DEFUN([AC_LIB_LINKFLAGS_BODY], [ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])]) pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])]) dnl Autoconf >= 2.61 supports dots in --with options. pushdef([P_A_C_K],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[m4_translit(PACK,[.],[_])],PACK)]) dnl By default, look in $includedir and $libdir. use_additional=yes AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) AC_ARG_WITH(P_A_C_K[-prefix], [[ --with-]]P_A_C_K[[-prefix[=DIR] search for ]PACKLIBS[ in DIR/include and DIR/lib --without-]]P_A_C_K[[-prefix don't search for ]PACKLIBS[ in includedir and libdir]], [ if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) else additional_includedir="$withval/include" additional_libdir="$withval/$acl_libdirstem" if test "$acl_libdirstem2" != "$acl_libdirstem" \ && ! test -d "$withval/$acl_libdirstem"; then additional_libdir="$withval/$acl_libdirstem2" fi fi fi ]) dnl Search the library and its dependencies in $additional_libdir and dnl $LDFLAGS. Using breadth-first-seach. LIB[]NAME= LTLIB[]NAME= INC[]NAME= LIB[]NAME[]_PREFIX= dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been dnl computed. So it has to be reset here. HAVE_LIB[]NAME= rpathdirs= ltrpathdirs= names_already_handled= names_next_round='$1 $2' while test -n "$names_next_round"; do names_this_round="$names_next_round" names_next_round= for name in $names_this_round; do already_handled= for n in $names_already_handled; do if test "$n" = "$name"; then already_handled=yes break fi done if test -z "$already_handled"; then names_already_handled="$names_already_handled $name" dnl See if it was already located by an earlier AC_LIB_LINKFLAGS dnl or AC_LIB_HAVE_LINKFLAGS call. uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` eval value=\"\$HAVE_LIB$uppername\" if test -n "$value"; then if test "$value" = yes; then eval value=\"\$LIB$uppername\" test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" eval value=\"\$LTLIB$uppername\" test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" else dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined dnl that this library doesn't exist. So just drop it. : fi else dnl Search the library lib$name in $additional_libdir and $LDFLAGS dnl and the already constructed $LIBNAME/$LTLIBNAME. found_dir= found_la= found_so= found_a= eval libname=\"$acl_libname_spec\" # typically: libname=lib$name if test -n "$acl_shlibext"; then shrext=".$acl_shlibext" # typically: shrext=.so else shrext= fi if test $use_additional = yes; then dir="$additional_libdir" dnl The same code as in the loop below: dnl First look for a shared library. if test -n "$acl_shlibext"; then if test -f "$dir/$libname$shrext"; then found_dir="$dir" found_so="$dir/$libname$shrext" else if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ver=`(cd "$dir" && \ for f in "$libname$shrext".*; do echo "$f"; done \ | sed -e "s,^$libname$shrext\\\\.,," \ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ | sed 1q ) 2>/dev/null` if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then found_dir="$dir" found_so="$dir/$libname$shrext.$ver" fi else eval library_names=\"$acl_library_names_spec\" for f in $library_names; do if test -f "$dir/$f"; then found_dir="$dir" found_so="$dir/$f" break fi done fi fi fi dnl Then look for a static library. if test "X$found_dir" = "X"; then if test -f "$dir/$libname.$acl_libext"; then found_dir="$dir" found_a="$dir/$libname.$acl_libext" fi fi if test "X$found_dir" != "X"; then if test -f "$dir/$libname.la"; then found_la="$dir/$libname.la" fi fi fi if test "X$found_dir" = "X"; then for x in $LDFLAGS $LTLIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) case "$x" in -L*) dir=`echo "X$x" | sed -e 's/^X-L//'` dnl First look for a shared library. if test -n "$acl_shlibext"; then if test -f "$dir/$libname$shrext"; then found_dir="$dir" found_so="$dir/$libname$shrext" else if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ver=`(cd "$dir" && \ for f in "$libname$shrext".*; do echo "$f"; done \ | sed -e "s,^$libname$shrext\\\\.,," \ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ | sed 1q ) 2>/dev/null` if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then found_dir="$dir" found_so="$dir/$libname$shrext.$ver" fi else eval library_names=\"$acl_library_names_spec\" for f in $library_names; do if test -f "$dir/$f"; then found_dir="$dir" found_so="$dir/$f" break fi done fi fi fi dnl Then look for a static library. if test "X$found_dir" = "X"; then if test -f "$dir/$libname.$acl_libext"; then found_dir="$dir" found_a="$dir/$libname.$acl_libext" fi fi if test "X$found_dir" != "X"; then if test -f "$dir/$libname.la"; then found_la="$dir/$libname.la" fi fi ;; esac if test "X$found_dir" != "X"; then break fi done fi if test "X$found_dir" != "X"; then dnl Found the library. LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" if test "X$found_so" != "X"; then dnl Linking with a shared library. We attempt to hardcode its dnl directory into the executable's runpath, unless it's the dnl standard /usr/lib. if test "$enable_rpath" = no \ || test "X$found_dir" = "X/usr/$acl_libdirstem" \ || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then dnl No hardcoding is needed. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else dnl Use an explicit option to hardcode DIR into the resulting dnl binary. dnl Potentially add DIR to ltrpathdirs. dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. haveit= for x in $ltrpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $found_dir" fi dnl The hardcoding into $LIBNAME is system dependent. if test "$acl_hardcode_direct" = yes; then dnl Using DIR/libNAME.so during linking hardcodes DIR into the dnl resulting binary. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then dnl Use an explicit option to hardcode DIR into the resulting dnl binary. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" dnl Potentially add DIR to rpathdirs. dnl The rpathdirs will be appended to $LIBNAME at the end. haveit= for x in $rpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $found_dir" fi else dnl Rely on "-L$found_dir". dnl But don't add it if it's already contained in the LDFLAGS dnl or the already constructed $LIBNAME haveit= for x in $LDFLAGS $LIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" fi if test "$acl_hardcode_minus_L" != no; then dnl FIXME: Not sure whether we should use dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" dnl here. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH dnl here, because this doesn't fit in flags passed to the dnl compiler. So give up. No hardcoding. This affects only dnl very old systems. dnl FIXME: Not sure whether we should use dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" dnl here. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" fi fi fi fi else if test "X$found_a" != "X"; then dnl Linking with a static library. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" else dnl We shouldn't come here, but anyway it's good to have a dnl fallback. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" fi fi dnl Assume the include files are nearby. additional_includedir= case "$found_dir" in */$acl_libdirstem | */$acl_libdirstem/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` if test "$name" = '$1'; then LIB[]NAME[]_PREFIX="$basedir" fi additional_includedir="$basedir/include" ;; */$acl_libdirstem2 | */$acl_libdirstem2/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` if test "$name" = '$1'; then LIB[]NAME[]_PREFIX="$basedir" fi additional_includedir="$basedir/include" ;; esac if test "X$additional_includedir" != "X"; then dnl Potentially add $additional_includedir to $INCNAME. dnl But don't add it dnl 1. if it's the standard /usr/include, dnl 2. if it's /usr/local/include and we are using GCC on Linux, dnl 3. if it's already present in $CPPFLAGS or the already dnl constructed $INCNAME, dnl 4. if it doesn't exist as a directory. if test "X$additional_includedir" != "X/usr/include"; then haveit= if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then for x in $CPPFLAGS $INC[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_includedir"; then dnl Really add $additional_includedir to $INCNAME. INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" fi fi fi fi fi dnl Look for dependencies. if test -n "$found_la"; then dnl Read the .la file. It defines the variables dnl dlname, library_names, old_library, dependency_libs, current, dnl age, revision, installed, dlopen, dlpreopen, libdir. save_libdir="$libdir" case "$found_la" in */* | *\\*) . "$found_la" ;; *) . "./$found_la" ;; esac libdir="$save_libdir" dnl We use only dependency_libs. for dep in $dependency_libs; do case "$dep" in -L*) additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. dnl But don't add it dnl 1. if it's the standard /usr/lib, dnl 2. if it's /usr/local/lib and we are using GCC on Linux, dnl 3. if it's already present in $LDFLAGS or the already dnl constructed $LIBNAME, dnl 4. if it doesn't exist as a directory. if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then haveit= if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then haveit= for x in $LDFLAGS $LIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LIBNAME. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" fi fi haveit= for x in $LDFLAGS $LTLIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LTLIBNAME. LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" fi fi fi fi ;; -R*) dir=`echo "X$dep" | sed -e 's/^X-R//'` if test "$enable_rpath" != no; then dnl Potentially add DIR to rpathdirs. dnl The rpathdirs will be appended to $LIBNAME at the end. haveit= for x in $rpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $dir" fi dnl Potentially add DIR to ltrpathdirs. dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. haveit= for x in $ltrpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $dir" fi fi ;; -l*) dnl Handle this in the next round. names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ;; *.la) dnl Handle this in the next round. Throw away the .la's dnl directory; it is already contained in a preceding -L dnl option. names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ;; *) dnl Most likely an immediate library name. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" ;; esac done fi else dnl Didn't find the library; assume it is in the system directories dnl known to the linker and runtime loader. (All the system dnl directories known to the linker should also be known to the dnl runtime loader, otherwise the system is severely misconfigured.) LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" fi fi fi done done if test "X$rpathdirs" != "X"; then if test -n "$acl_hardcode_libdir_separator"; then dnl Weird platform: only the last -rpath option counts, the user must dnl pass all path elements in one option. We can arrange that for a dnl single library, but not when more than one $LIBNAMEs are used. alldirs= for found_dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" done dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl. acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" else dnl The -rpath options are cumulative. for found_dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$found_dir" eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" done fi fi if test "X$ltrpathdirs" != "X"; then dnl When using libtool, the option that works for both libraries and dnl executables is -R. The -R options are cumulative. for found_dir in $ltrpathdirs; do LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" done fi popdef([P_A_C_K]) popdef([PACKLIBS]) popdef([PACKUP]) popdef([PACK]) popdef([NAME]) ]) dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, dnl unless already present in VAR. dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes dnl contains two or three consecutive elements that belong together. AC_DEFUN([AC_LIB_APPENDTOVAR], [ for element in [$2]; do haveit= for x in $[$1]; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X$element"; then haveit=yes break fi done if test -z "$haveit"; then [$1]="${[$1]}${[$1]:+ }$element" fi done ]) dnl For those cases where a variable contains several -L and -l options dnl referring to unknown libraries and directories, this macro determines the dnl necessary additional linker options for the runtime path. dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL]) dnl sets LDADDVAR to linker options needed together with LIBSVALUE. dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed, dnl otherwise linking without libtool is assumed. AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS], [ AC_REQUIRE([AC_LIB_RPATH]) AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) $1= if test "$enable_rpath" != no; then if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then dnl Use an explicit option to hardcode directories into the resulting dnl binary. rpathdirs= next= for opt in $2; do if test -n "$next"; then dir="$next" dnl No need to hardcode the standard /usr/lib. if test "X$dir" != "X/usr/$acl_libdirstem" \ && test "X$dir" != "X/usr/$acl_libdirstem2"; then rpathdirs="$rpathdirs $dir" fi next= else case $opt in -L) next=yes ;; -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'` dnl No need to hardcode the standard /usr/lib. if test "X$dir" != "X/usr/$acl_libdirstem" \ && test "X$dir" != "X/usr/$acl_libdirstem2"; then rpathdirs="$rpathdirs $dir" fi next= ;; *) next= ;; esac fi done if test "X$rpathdirs" != "X"; then if test -n ""$3""; then dnl libtool is used for linking. Use -R options. for dir in $rpathdirs; do $1="${$1}${$1:+ }-R$dir" done else dnl The linker is used for linking directly. if test -n "$acl_hardcode_libdir_separator"; then dnl Weird platform: only the last -rpath option counts, the user dnl must pass all path elements in one option. alldirs= for dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir" done acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" $1="$flag" else dnl The -rpath options are cumulative. for dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$dir" eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" $1="${$1}${$1:+ }$flag" done fi fi fi fi fi AC_SUBST([$1]) ]) lightdm-gtk-greeter-2.0.5/m4/introspection.m40000644000175000017500000000673613243246347023064 0ustar00bluesabrebluesabre00000000000000dnl -*- mode: autoconf -*- dnl Copyright 2009 Johan Dahlin dnl dnl This file is free software; the author(s) gives unlimited dnl permission to copy and/or distribute it, with or without dnl modifications, as long as this notice is preserved. dnl # serial 1 m4_define([_GOBJECT_INTROSPECTION_CHECK_INTERNAL], [ AC_BEFORE([AC_PROG_LIBTOOL],[$0])dnl setup libtool first AC_BEFORE([AM_PROG_LIBTOOL],[$0])dnl setup libtool first AC_BEFORE([LT_INIT],[$0])dnl setup libtool first dnl enable/disable introspection m4_if([$2], [require], [dnl enable_introspection=yes ],[dnl AC_ARG_ENABLE(introspection, AS_HELP_STRING([--enable-introspection[=@<:@no/auto/yes@:>@]], [Enable introspection for this build]),, [enable_introspection=auto]) ])dnl AC_MSG_CHECKING([for gobject-introspection]) dnl presence/version checking AS_CASE([$enable_introspection], [no], [dnl found_introspection="no (disabled, use --enable-introspection to enable)" ],dnl [yes],[dnl PKG_CHECK_EXISTS([gobject-introspection-1.0],, AC_MSG_ERROR([gobject-introspection-1.0 is not installed])) PKG_CHECK_EXISTS([gobject-introspection-1.0 >= $1], found_introspection=yes, AC_MSG_ERROR([You need to have gobject-introspection >= $1 installed to build AC_PACKAGE_NAME])) ],dnl [auto],[dnl PKG_CHECK_EXISTS([gobject-introspection-1.0 >= $1], found_introspection=yes, found_introspection=no) dnl Canonicalize enable_introspection enable_introspection=$found_introspection ],dnl [dnl AC_MSG_ERROR([invalid argument passed to --enable-introspection, should be one of @<:@no/auto/yes@:>@]) ])dnl AC_MSG_RESULT([$found_introspection]) INTROSPECTION_SCANNER= INTROSPECTION_COMPILER= INTROSPECTION_GENERATE= INTROSPECTION_GIRDIR= INTROSPECTION_TYPELIBDIR= if test "x$found_introspection" = "xyes"; then INTROSPECTION_SCANNER=`$PKG_CONFIG --variable=g_ir_scanner gobject-introspection-1.0` INTROSPECTION_COMPILER=`$PKG_CONFIG --variable=g_ir_compiler gobject-introspection-1.0` INTROSPECTION_GENERATE=`$PKG_CONFIG --variable=g_ir_generate gobject-introspection-1.0` INTROSPECTION_GIRDIR=`$PKG_CONFIG --variable=girdir gobject-introspection-1.0` INTROSPECTION_TYPELIBDIR="$($PKG_CONFIG --variable=typelibdir gobject-introspection-1.0)" INTROSPECTION_CFLAGS=`$PKG_CONFIG --cflags gobject-introspection-1.0` INTROSPECTION_LIBS=`$PKG_CONFIG --libs gobject-introspection-1.0` INTROSPECTION_MAKEFILE=`$PKG_CONFIG --variable=datadir gobject-introspection-1.0`/gobject-introspection-1.0/Makefile.introspection fi AC_SUBST(INTROSPECTION_SCANNER) AC_SUBST(INTROSPECTION_COMPILER) AC_SUBST(INTROSPECTION_GENERATE) AC_SUBST(INTROSPECTION_GIRDIR) AC_SUBST(INTROSPECTION_TYPELIBDIR) AC_SUBST(INTROSPECTION_CFLAGS) AC_SUBST(INTROSPECTION_LIBS) AC_SUBST(INTROSPECTION_MAKEFILE) AM_CONDITIONAL(HAVE_INTROSPECTION, test "x$found_introspection" = "xyes") ]) dnl Usage: dnl GOBJECT_INTROSPECTION_CHECK([minimum-g-i-version]) AC_DEFUN([GOBJECT_INTROSPECTION_CHECK], [ _GOBJECT_INTROSPECTION_CHECK_INTERNAL([$1]) ]) dnl Usage: dnl GOBJECT_INTROSPECTION_REQUIRE([minimum-g-i-version]) AC_DEFUN([GOBJECT_INTROSPECTION_REQUIRE], [ _GOBJECT_INTROSPECTION_CHECK_INTERNAL([$1], [require]) ]) lightdm-gtk-greeter-2.0.5/m4/ltoptions.m40000644000175000017500000003426213253544546022215 0ustar00bluesabrebluesabre00000000000000# Helper functions for option handling. -*- Autoconf -*- # # Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software # Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 8 ltoptions.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) # _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) # ------------------------------------------ m4_define([_LT_MANGLE_OPTION], [[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) # _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) # --------------------------------------- # Set option OPTION-NAME for macro MACRO-NAME, and if there is a # matching handler defined, dispatch to it. Other OPTION-NAMEs are # saved as a flag. m4_define([_LT_SET_OPTION], [m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), _LT_MANGLE_DEFUN([$1], [$2]), [m4_warning([Unknown $1 option '$2'])])[]dnl ]) # _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) # ------------------------------------------------------------ # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. m4_define([_LT_IF_OPTION], [m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) # _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) # ------------------------------------------------------- # Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME # are set. m4_define([_LT_UNLESS_OPTIONS], [m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), [m4_define([$0_found])])])[]dnl m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 ])[]dnl ]) # _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) # ---------------------------------------- # OPTION-LIST is a space-separated list of Libtool options associated # with MACRO-NAME. If any OPTION has a matching handler declared with # LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about # the unknown option and exit. m4_defun([_LT_SET_OPTIONS], [# Set options m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [_LT_SET_OPTION([$1], _LT_Option)]) m4_if([$1],[LT_INIT],[ dnl dnl Simply set some default values (i.e off) if boolean options were not dnl specified: _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no ]) _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no ]) dnl dnl If no reference was made to various pairs of opposing options, then dnl we run the default mode handler for the pair. For example, if neither dnl 'shared' nor 'disable-shared' was passed, we enable building of shared dnl archives by default: _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], [_LT_ENABLE_FAST_INSTALL]) _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4], [_LT_WITH_AIX_SONAME([aix])]) ]) ])# _LT_SET_OPTIONS ## --------------------------------- ## ## Macros to handle LT_INIT options. ## ## --------------------------------- ## # _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) # ----------------------------------------- m4_define([_LT_MANGLE_DEFUN], [[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) # LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) # ----------------------------------------------- m4_define([LT_OPTION_DEFINE], [m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl ])# LT_OPTION_DEFINE # dlopen # ------ LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes ]) AU_DEFUN([AC_LIBTOOL_DLOPEN], [_LT_SET_OPTION([LT_INIT], [dlopen]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the 'dlopen' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) # win32-dll # --------- # Declare package support for building win32 dll's. LT_OPTION_DEFINE([LT_INIT], [win32-dll], [enable_win32_dll=yes case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) ;; esac test -z "$AS" && AS=as _LT_DECL([], [AS], [1], [Assembler program])dnl test -z "$DLLTOOL" && DLLTOOL=dlltool _LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl ])# win32-dll AU_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_REQUIRE([AC_CANONICAL_HOST])dnl _LT_SET_OPTION([LT_INIT], [win32-dll]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the 'win32-dll' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) # _LT_ENABLE_SHARED([DEFAULT]) # ---------------------------- # implement the --enable-shared flag, and supports the 'shared' and # 'disable-shared' LT_INIT options. # DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. m4_define([_LT_ENABLE_SHARED], [m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([shared], [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS=$lt_save_ifs ;; esac], [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) _LT_DECL([build_libtool_libs], [enable_shared], [0], [Whether or not to build shared libraries]) ])# _LT_ENABLE_SHARED LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) # Old names: AC_DEFUN([AC_ENABLE_SHARED], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) ]) AC_DEFUN([AC_DISABLE_SHARED], [_LT_SET_OPTION([LT_INIT], [disable-shared]) ]) AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_SHARED], []) dnl AC_DEFUN([AM_DISABLE_SHARED], []) # _LT_ENABLE_STATIC([DEFAULT]) # ---------------------------- # implement the --enable-static flag, and support the 'static' and # 'disable-static' LT_INIT options. # DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. m4_define([_LT_ENABLE_STATIC], [m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([static], [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS=$lt_save_ifs ;; esac], [enable_static=]_LT_ENABLE_STATIC_DEFAULT) _LT_DECL([build_old_libs], [enable_static], [0], [Whether or not to build static libraries]) ])# _LT_ENABLE_STATIC LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) # Old names: AC_DEFUN([AC_ENABLE_STATIC], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) ]) AC_DEFUN([AC_DISABLE_STATIC], [_LT_SET_OPTION([LT_INIT], [disable-static]) ]) AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_STATIC], []) dnl AC_DEFUN([AM_DISABLE_STATIC], []) # _LT_ENABLE_FAST_INSTALL([DEFAULT]) # ---------------------------------- # implement the --enable-fast-install flag, and support the 'fast-install' # and 'disable-fast-install' LT_INIT options. # DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. m4_define([_LT_ENABLE_FAST_INSTALL], [m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([fast-install], [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS=$lt_save_ifs ;; esac], [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) _LT_DECL([fast_install], [enable_fast_install], [0], [Whether or not to optimize for fast installation])dnl ])# _LT_ENABLE_FAST_INSTALL LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) # Old names: AU_DEFUN([AC_ENABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the 'fast-install' option into LT_INIT's first parameter.]) ]) AU_DEFUN([AC_DISABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], [disable-fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the 'disable-fast-install' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) # _LT_WITH_AIX_SONAME([DEFAULT]) # ---------------------------------- # implement the --with-aix-soname flag, and support the `aix-soname=aix' # and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT # is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'. m4_define([_LT_WITH_AIX_SONAME], [m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl shared_archive_member_spec= case $host,$enable_shared in power*-*-aix[[5-9]]*,yes) AC_MSG_CHECKING([which variant of shared library versioning to provide]) AC_ARG_WITH([aix-soname], [AS_HELP_STRING([--with-aix-soname=aix|svr4|both], [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])], [case $withval in aix|svr4|both) ;; *) AC_MSG_ERROR([Unknown argument to --with-aix-soname]) ;; esac lt_cv_with_aix_soname=$with_aix_soname], [AC_CACHE_VAL([lt_cv_with_aix_soname], [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT) with_aix_soname=$lt_cv_with_aix_soname]) AC_MSG_RESULT([$with_aix_soname]) if test aix != "$with_aix_soname"; then # For the AIX way of multilib, we name the shared archive member # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, # the AIX toolchain works better with OBJECT_MODE set (default 32). if test 64 = "${OBJECT_MODE-32}"; then shared_archive_member_spec=shr_64 else shared_archive_member_spec=shr fi fi ;; *) with_aix_soname=aix ;; esac _LT_DECL([], [shared_archive_member_spec], [0], [Shared archive member basename, for filename based shared library versioning on AIX])dnl ])# _LT_WITH_AIX_SONAME LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])]) LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])]) LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])]) # _LT_WITH_PIC([MODE]) # -------------------- # implement the --with-pic flag, and support the 'pic-only' and 'no-pic' # LT_INIT options. # MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'. m4_define([_LT_WITH_PIC], [AC_ARG_WITH([pic], [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], [lt_p=${PACKAGE-default} case $withval in yes|no) pic_mode=$withval ;; *) pic_mode=default # Look at the argument we got. We use all the common list separators. lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for lt_pkg in $withval; do IFS=$lt_save_ifs if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done IFS=$lt_save_ifs ;; esac], [pic_mode=m4_default([$1], [default])]) _LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl ])# _LT_WITH_PIC LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) # Old name: AU_DEFUN([AC_LIBTOOL_PICMODE], [_LT_SET_OPTION([LT_INIT], [pic-only]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the 'pic-only' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) ## ----------------- ## ## LTDL_INIT Options ## ## ----------------- ## m4_define([_LTDL_MODE], []) LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], [m4_define([_LTDL_MODE], [nonrecursive])]) LT_OPTION_DEFINE([LTDL_INIT], [recursive], [m4_define([_LTDL_MODE], [recursive])]) LT_OPTION_DEFINE([LTDL_INIT], [subproject], [m4_define([_LTDL_MODE], [subproject])]) m4_define([_LTDL_TYPE], []) LT_OPTION_DEFINE([LTDL_INIT], [installable], [m4_define([_LTDL_TYPE], [installable])]) LT_OPTION_DEFINE([LTDL_INIT], [convenience], [m4_define([_LTDL_TYPE], [convenience])]) lightdm-gtk-greeter-2.0.5/m4/libtool.m40000644000175000017500000112617113253544546021630 0ustar00bluesabrebluesabre00000000000000# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # # Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. m4_define([_LT_COPYING], [dnl # Copyright (C) 2014 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program or library that is built # using GNU Libtool, you may include this file under the same # distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . ]) # serial 58 LT_INIT # LT_PREREQ(VERSION) # ------------------ # Complain and exit if this libtool version is less that VERSION. m4_defun([LT_PREREQ], [m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, [m4_default([$3], [m4_fatal([Libtool version $1 or higher is required], 63)])], [$2])]) # _LT_CHECK_BUILDDIR # ------------------ # Complain if the absolute build directory name contains unusual characters m4_defun([_LT_CHECK_BUILDDIR], [case `pwd` in *\ * | *\ *) AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; esac ]) # LT_INIT([OPTIONS]) # ------------------ AC_DEFUN([LT_INIT], [AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl AC_BEFORE([$0], [LT_LANG])dnl AC_BEFORE([$0], [LT_OUTPUT])dnl AC_BEFORE([$0], [LTDL_INIT])dnl m4_require([_LT_CHECK_BUILDDIR])dnl dnl Autoconf doesn't catch unexpanded LT_ macros by default: m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 dnl unless we require an AC_DEFUNed macro: AC_REQUIRE([LTOPTIONS_VERSION])dnl AC_REQUIRE([LTSUGAR_VERSION])dnl AC_REQUIRE([LTVERSION_VERSION])dnl AC_REQUIRE([LTOBSOLETE_VERSION])dnl m4_require([_LT_PROG_LTMAIN])dnl _LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) dnl Parse OPTIONS _LT_SET_OPTIONS([$0], [$1]) # This can be used to rebuild libtool when needed LIBTOOL_DEPS=$ltmain # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl _LT_SETUP # Only expand once: m4_define([LT_INIT]) ])# LT_INIT # Old names: AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PROG_LIBTOOL], []) dnl AC_DEFUN([AM_PROG_LIBTOOL], []) # _LT_PREPARE_CC_BASENAME # ----------------------- m4_defun([_LT_PREPARE_CC_BASENAME], [ # Calculate cc_basename. Skip known compiler wrappers and cross-prefix. func_cc_basename () { for cc_temp in @S|@*""; do case $cc_temp in compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; \-*) ;; *) break;; esac done func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` } ])# _LT_PREPARE_CC_BASENAME # _LT_CC_BASENAME(CC) # ------------------- # It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME, # but that macro is also expanded into generated libtool script, which # arranges for $SED and $ECHO to be set by different means. m4_defun([_LT_CC_BASENAME], [m4_require([_LT_PREPARE_CC_BASENAME])dnl AC_REQUIRE([_LT_DECL_SED])dnl AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl func_cc_basename $1 cc_basename=$func_cc_basename_result ]) # _LT_FILEUTILS_DEFAULTS # ---------------------- # It is okay to use these file commands and assume they have been set # sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'. m4_defun([_LT_FILEUTILS_DEFAULTS], [: ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} ])# _LT_FILEUTILS_DEFAULTS # _LT_SETUP # --------- m4_defun([_LT_SETUP], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl _LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl dnl _LT_DECL([], [host_alias], [0], [The host system])dnl _LT_DECL([], [host], [0])dnl _LT_DECL([], [host_os], [0])dnl dnl _LT_DECL([], [build_alias], [0], [The build system])dnl _LT_DECL([], [build], [0])dnl _LT_DECL([], [build_os], [0])dnl dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl dnl AC_REQUIRE([AC_PROG_LN_S])dnl test -z "$LN_S" && LN_S="ln -s" _LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl dnl AC_REQUIRE([LT_CMD_MAX_LEN])dnl _LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl _LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl m4_require([_LT_CMD_RELOAD])dnl m4_require([_LT_CHECK_MAGIC_METHOD])dnl m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl m4_require([_LT_CMD_OLD_ARCHIVE])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_WITH_SYSROOT])dnl m4_require([_LT_CMD_TRUNCATE])dnl _LT_CONFIG_LIBTOOL_INIT([ # See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi ]) if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi _LT_CHECK_OBJDIR m4_require([_LT_TAG_COMPILER])dnl case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a '.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld=$lt_cv_prog_gnu_ld old_CC=$CC old_CFLAGS=$CFLAGS # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o _LT_CC_BASENAME([$compiler]) # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then _LT_PATH_MAGIC fi ;; esac # Use C for the default configuration in the libtool script LT_SUPPORTED_TAG([CC]) _LT_LANG_C_CONFIG _LT_LANG_DEFAULT_CONFIG _LT_CONFIG_COMMANDS ])# _LT_SETUP # _LT_PREPARE_SED_QUOTE_VARS # -------------------------- # Define a few sed substitution that help us do robust quoting. m4_defun([_LT_PREPARE_SED_QUOTE_VARS], [# Backslashify metacharacters that are still active within # double-quoted strings. sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\([["`\\]]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' ]) # _LT_PROG_LTMAIN # --------------- # Note that this code is called both from 'configure', and 'config.status' # now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, # 'config.status' has no value for ac_aux_dir unless we are using Automake, # so we pass a copy along to make sure it has a sensible value anyway. m4_defun([_LT_PROG_LTMAIN], [m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl _LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) ltmain=$ac_aux_dir/ltmain.sh ])# _LT_PROG_LTMAIN ## ------------------------------------- ## ## Accumulate code for creating libtool. ## ## ------------------------------------- ## # So that we can recreate a full libtool script including additional # tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS # in macros and then make a single call at the end using the 'libtool' # label. # _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) # ---------------------------------------- # Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL_INIT], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_INIT], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_INIT]) # _LT_CONFIG_LIBTOOL([COMMANDS]) # ------------------------------ # Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) # _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) # ----------------------------------------------------- m4_defun([_LT_CONFIG_SAVE_COMMANDS], [_LT_CONFIG_LIBTOOL([$1]) _LT_CONFIG_LIBTOOL_INIT([$2]) ]) # _LT_FORMAT_COMMENT([COMMENT]) # ----------------------------- # Add leading comment marks to the start of each line, and a trailing # full-stop to the whole comment if one is not present already. m4_define([_LT_FORMAT_COMMENT], [m4_ifval([$1], [ m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) )]) ## ------------------------ ## ## FIXME: Eliminate VARNAME ## ## ------------------------ ## # _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) # ------------------------------------------------------------------- # CONFIGNAME is the name given to the value in the libtool script. # VARNAME is the (base) name used in the configure script. # VALUE may be 0, 1 or 2 for a computed quote escaped value based on # VARNAME. Any other value will be used directly. m4_define([_LT_DECL], [lt_if_append_uniq([lt_decl_varnames], [$2], [, ], [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], [m4_ifval([$1], [$1], [$2])]) lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) m4_ifval([$4], [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) lt_dict_add_subkey([lt_decl_dict], [$2], [tagged?], [m4_ifval([$5], [yes], [no])])]) ]) # _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) # -------------------------------------------------------- m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) # lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_tag_varnames], [_lt_decl_filter([tagged?], [yes], $@)]) # _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) # --------------------------------------------------------- m4_define([_lt_decl_filter], [m4_case([$#], [0], [m4_fatal([$0: too few arguments: $#])], [1], [m4_fatal([$0: too few arguments: $#: $1])], [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], [lt_dict_filter([lt_decl_dict], $@)])[]dnl ]) # lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) # -------------------------------------------------- m4_define([lt_decl_quote_varnames], [_lt_decl_filter([value], [1], $@)]) # lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_dquote_varnames], [_lt_decl_filter([value], [2], $@)]) # lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_varnames_tagged], [m4_assert([$# <= 2])dnl _$0(m4_quote(m4_default([$1], [[, ]])), m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) m4_define([_lt_decl_varnames_tagged], [m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) # lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_all_varnames], [_$0(m4_quote(m4_default([$1], [[, ]])), m4_if([$2], [], m4_quote(lt_decl_varnames), m4_quote(m4_shift($@))))[]dnl ]) m4_define([_lt_decl_all_varnames], [lt_join($@, lt_decl_varnames_tagged([$1], lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl ]) # _LT_CONFIG_STATUS_DECLARE([VARNAME]) # ------------------------------------ # Quote a variable value, and forward it to 'config.status' so that its # declaration there will have the same value as in 'configure'. VARNAME # must have a single quote delimited value for this to work. m4_define([_LT_CONFIG_STATUS_DECLARE], [$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) # _LT_CONFIG_STATUS_DECLARATIONS # ------------------------------ # We delimit libtool config variables with single quotes, so when # we write them to config.status, we have to be sure to quote all # embedded single quotes properly. In configure, this macro expands # each variable declared with _LT_DECL (and _LT_TAGDECL) into: # # ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAGS # ---------------- # Output comment and list of tags supported by the script m4_defun([_LT_LIBTOOL_TAGS], [_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl available_tags='_LT_TAGS'dnl ]) # _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) # ----------------------------------- # Extract the dictionary values for VARNAME (optionally with TAG) and # expand to a commented shell variable setting: # # # Some comment about what VAR is for. # visible_name=$lt_internal_name m4_define([_LT_LIBTOOL_DECLARE], [_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [description])))[]dnl m4_pushdef([_libtool_name], m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), [0], [_libtool_name=[$]$1], [1], [_libtool_name=$lt_[]$1], [2], [_libtool_name=$lt_[]$1], [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl ]) # _LT_LIBTOOL_CONFIG_VARS # ----------------------- # Produce commented declarations of non-tagged libtool config variables # suitable for insertion in the LIBTOOL CONFIG section of the 'libtool' # script. Tagged libtool config variables (even for the LIBTOOL CONFIG # section) are produced by _LT_LIBTOOL_TAG_VARS. m4_defun([_LT_LIBTOOL_CONFIG_VARS], [m4_foreach([_lt_var], m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAG_VARS(TAG) # ------------------------- m4_define([_LT_LIBTOOL_TAG_VARS], [m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) # _LT_TAGVAR(VARNAME, [TAGNAME]) # ------------------------------ m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) # _LT_CONFIG_COMMANDS # ------------------- # Send accumulated output to $CONFIG_STATUS. Thanks to the lists of # variables for single and double quote escaping we saved from calls # to _LT_DECL, we can put quote escaped variables declarations # into 'config.status', and then the shell code to quote escape them in # for loops in 'config.status'. Finally, any additional code accumulated # from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. m4_defun([_LT_CONFIG_COMMANDS], [AC_PROVIDE_IFELSE([LT_OUTPUT], dnl If the libtool generation code has been placed in $CONFIG_LT, dnl instead of duplicating it all over again into config.status, dnl then we will have config.status run $CONFIG_LT later, so it dnl needs to know what name is stored there: [AC_CONFIG_COMMANDS([libtool], [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], dnl If the libtool generation code is destined for config.status, dnl expand the accumulated commands and init code now: [AC_CONFIG_COMMANDS([libtool], [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) ])#_LT_CONFIG_COMMANDS # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], [ # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' _LT_CONFIG_STATUS_DECLARATIONS LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$[]1 _LTECHO_EOF' } # Quote evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_quote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_dquote_varnames); do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done _LT_OUTPUT_LIBTOOL_INIT ]) # _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) # ------------------------------------ # Generate a child script FILE with all initialization necessary to # reuse the environment learned by the parent script, and make the # file executable. If COMMENT is supplied, it is inserted after the # '#!' sequence but before initialization text begins. After this # macro, additional text can be appended to FILE to form the body of # the child script. The macro ends with non-zero status if the # file could not be fully written (such as if the disk is full). m4_ifdef([AS_INIT_GENERATED], [m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], [m4_defun([_LT_GENERATED_FILE_INIT], [m4_require([AS_PREPARE])]dnl [m4_pushdef([AS_MESSAGE_LOG_FD])]dnl [lt_write_fail=0 cat >$1 <<_ASEOF || lt_write_fail=1 #! $SHELL # Generated by $as_me. $2 SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$1 <<\_ASEOF || lt_write_fail=1 AS_SHELL_SANITIZE _AS_PREPARE exec AS_MESSAGE_FD>&1 _ASEOF test 0 = "$lt_write_fail" && chmod +x $1[]dnl m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT # LT_OUTPUT # --------- # This macro allows early generation of the libtool script (before # AC_OUTPUT is called), incase it is used in configure for compilation # tests. AC_DEFUN([LT_OUTPUT], [: ${CONFIG_LT=./config.lt} AC_MSG_NOTICE([creating $CONFIG_LT]) _LT_GENERATED_FILE_INIT(["$CONFIG_LT"], [# Run this file to recreate a libtool stub with the current configuration.]) cat >>"$CONFIG_LT" <<\_LTEOF lt_cl_silent=false exec AS_MESSAGE_LOG_FD>>config.log { echo AS_BOX([Running $as_me.]) } >&AS_MESSAGE_LOG_FD lt_cl_help="\ '$as_me' creates a local libtool stub from the current configuration, for use in further configure time tests before the real libtool is generated. Usage: $[0] [[OPTIONS]] -h, --help print this help, then exit -V, --version print version number, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files Report bugs to ." lt_cl_version="\ m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) configured by $[0], generated by m4_PACKAGE_STRING. Copyright (C) 2011 Free Software Foundation, Inc. This config.lt script is free software; the Free Software Foundation gives unlimited permision to copy, distribute and modify it." while test 0 != $[#] do case $[1] in --version | --v* | -V ) echo "$lt_cl_version"; exit 0 ;; --help | --h* | -h ) echo "$lt_cl_help"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --quiet | --q* | --silent | --s* | -q ) lt_cl_silent=: ;; -*) AC_MSG_ERROR([unrecognized option: $[1] Try '$[0] --help' for more information.]) ;; *) AC_MSG_ERROR([unrecognized argument: $[1] Try '$[0] --help' for more information.]) ;; esac shift done if $lt_cl_silent; then exec AS_MESSAGE_FD>/dev/null fi _LTEOF cat >>"$CONFIG_LT" <<_LTEOF _LT_OUTPUT_LIBTOOL_COMMANDS_INIT _LTEOF cat >>"$CONFIG_LT" <<\_LTEOF AC_MSG_NOTICE([creating $ofile]) _LT_OUTPUT_LIBTOOL_COMMANDS AS_EXIT(0) _LTEOF chmod +x "$CONFIG_LT" # configure is writing to config.log, but config.lt does its own redirection, # appending to config.log, which fails on DOS, as config.log is still kept # open by configure. Here we exec the FD to /dev/null, effectively closing # config.log, so it can be properly (re)opened and appended to by config.lt. lt_cl_success=: test yes = "$silent" && lt_config_lt_args="$lt_config_lt_args --quiet" exec AS_MESSAGE_LOG_FD>/dev/null $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false exec AS_MESSAGE_LOG_FD>>config.log $lt_cl_success || AS_EXIT(1) ])# LT_OUTPUT # _LT_CONFIG(TAG) # --------------- # If TAG is the built-in tag, create an initial libtool script with a # default configuration from the untagged config vars. Otherwise add code # to config.status for appending the configuration named by TAG from the # matching tagged config vars. m4_defun([_LT_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_CONFIG_SAVE_COMMANDS([ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl m4_if(_LT_TAG, [C], [ # See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi cfgfile=${ofile}T trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # Generated automatically by $as_me ($PACKAGE) $VERSION # NOTE: Changes made to this file will be lost: look at ltmain.sh. # Provide generalized library-building support services. # Written by Gordon Matzigkeit, 1996 _LT_COPYING _LT_LIBTOOL_TAGS # Configured defaults for sys_lib_dlsearch_path munging. : \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} # ### BEGIN LIBTOOL CONFIG _LT_LIBTOOL_CONFIG_VARS _LT_LIBTOOL_TAG_VARS # ### END LIBTOOL CONFIG _LT_EOF cat <<'_LT_EOF' >> "$cfgfile" # ### BEGIN FUNCTIONS SHARED WITH CONFIGURE _LT_PREPARE_MUNGE_PATH_LIST _LT_PREPARE_CC_BASENAME # ### END FUNCTIONS SHARED WITH CONFIGURE _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac _LT_PROG_LTMAIN # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ], [cat <<_LT_EOF >> "$ofile" dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded dnl in a comment (ie after a #). # ### BEGIN LIBTOOL TAG CONFIG: $1 _LT_LIBTOOL_TAG_VARS(_LT_TAG) # ### END LIBTOOL TAG CONFIG: $1 _LT_EOF ])dnl /m4_if ], [m4_if([$1], [], [ PACKAGE='$PACKAGE' VERSION='$VERSION' RM='$RM' ofile='$ofile'], []) ])dnl /_LT_CONFIG_SAVE_COMMANDS ])# _LT_CONFIG # LT_SUPPORTED_TAG(TAG) # --------------------- # Trace this macro to discover what tags are supported by the libtool # --tag option, using: # autoconf --trace 'LT_SUPPORTED_TAG:$1' AC_DEFUN([LT_SUPPORTED_TAG], []) # C support is built-in for now m4_define([_LT_LANG_C_enabled], []) m4_define([_LT_TAGS], []) # LT_LANG(LANG) # ------------- # Enable libtool support for the given language if not already enabled. AC_DEFUN([LT_LANG], [AC_BEFORE([$0], [LT_OUTPUT])dnl m4_case([$1], [C], [_LT_LANG(C)], [C++], [_LT_LANG(CXX)], [Go], [_LT_LANG(GO)], [Java], [_LT_LANG(GCJ)], [Fortran 77], [_LT_LANG(F77)], [Fortran], [_LT_LANG(FC)], [Windows Resource], [_LT_LANG(RC)], [m4_ifdef([_LT_LANG_]$1[_CONFIG], [_LT_LANG($1)], [m4_fatal([$0: unsupported language: "$1"])])])dnl ])# LT_LANG # _LT_LANG(LANGNAME) # ------------------ m4_defun([_LT_LANG], [m4_ifdef([_LT_LANG_]$1[_enabled], [], [LT_SUPPORTED_TAG([$1])dnl m4_append([_LT_TAGS], [$1 ])dnl m4_define([_LT_LANG_]$1[_enabled], [])dnl _LT_LANG_$1_CONFIG($1)])dnl ])# _LT_LANG m4_ifndef([AC_PROG_GO], [ ############################################################ # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_GO. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # ############################################################ m4_defun([AC_PROG_GO], [AC_LANG_PUSH(Go)dnl AC_ARG_VAR([GOC], [Go compiler command])dnl AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl _AC_ARG_VAR_LDFLAGS()dnl AC_CHECK_TOOL(GOC, gccgo) if test -z "$GOC"; then if test -n "$ac_tool_prefix"; then AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) fi fi if test -z "$GOC"; then AC_CHECK_PROG(GOC, gccgo, gccgo, false) fi ])#m4_defun ])#m4_ifndef # _LT_LANG_DEFAULT_CONFIG # ----------------------- m4_defun([_LT_LANG_DEFAULT_CONFIG], [AC_PROVIDE_IFELSE([AC_PROG_CXX], [LT_LANG(CXX)], [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) AC_PROVIDE_IFELSE([AC_PROG_F77], [LT_LANG(F77)], [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) AC_PROVIDE_IFELSE([AC_PROG_FC], [LT_LANG(FC)], [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal dnl pulling things in needlessly. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([LT_PROG_GCJ], [LT_LANG(GCJ)], [m4_ifdef([AC_PROG_GCJ], [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([A][M_PROG_GCJ], [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([LT_PROG_GCJ], [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) AC_PROVIDE_IFELSE([AC_PROG_GO], [LT_LANG(GO)], [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) AC_PROVIDE_IFELSE([LT_PROG_RC], [LT_LANG(RC)], [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) ])# _LT_LANG_DEFAULT_CONFIG # Obsolete macros: AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_CXX], []) dnl AC_DEFUN([AC_LIBTOOL_F77], []) dnl AC_DEFUN([AC_LIBTOOL_FC], []) dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) dnl AC_DEFUN([AC_LIBTOOL_RC], []) # _LT_TAG_COMPILER # ---------------- m4_defun([_LT_TAG_COMPILER], [AC_REQUIRE([AC_PROG_CC])dnl _LT_DECL([LTCC], [CC], [1], [A C compiler])dnl _LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl _LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl _LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC ])# _LT_TAG_COMPILER # _LT_COMPILER_BOILERPLATE # ------------------------ # Check for compiler boilerplate output or warnings with # the simple compiler test code. m4_defun([_LT_COMPILER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ])# _LT_COMPILER_BOILERPLATE # _LT_LINKER_BOILERPLATE # ---------------------- # Check for linker boilerplate output or warnings with # the simple link test code. m4_defun([_LT_LINKER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ])# _LT_LINKER_BOILERPLATE # _LT_REQUIRED_DARWIN_CHECKS # ------------------------- m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ case $host_os in rhapsody* | darwin*) AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) AC_CHECK_TOOL([LIPO], [lipo], [:]) AC_CHECK_TOOL([OTOOL], [otool], [:]) AC_CHECK_TOOL([OTOOL64], [otool64], [:]) _LT_DECL([], [DSYMUTIL], [1], [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) _LT_DECL([], [NMEDIT], [1], [Tool to change global to local symbols on Mac OS X]) _LT_DECL([], [LIPO], [1], [Tool to manipulate fat objects and archives on Mac OS X]) _LT_DECL([], [OTOOL], [1], [ldd/readelf like tool for Mach-O binaries on Mac OS X]) _LT_DECL([], [OTOOL64], [1], [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], [lt_cv_apple_cc_single_mod=no if test -z "$LT_MULTI_MODULE"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? # If there is a non-empty error log, and "single_module" # appears in it, assume the flag caused a linker warning if test -s conftest.err && $GREP single_module conftest.err; then cat conftest.err >&AS_MESSAGE_LOG_FD # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. elif test -f libconftest.dylib && test 0 = "$_lt_result"; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&AS_MESSAGE_LOG_FD fi rm -rf libconftest.dylib* rm -f conftest.* fi]) AC_CACHE_CHECK([for -exported_symbols_list linker flag], [lt_cv_ld_exported_symbols_list], [lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [lt_cv_ld_exported_symbols_list=yes], [lt_cv_ld_exported_symbols_list=no]) LDFLAGS=$save_LDFLAGS ]) AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], [lt_cv_ld_force_load=no cat > conftest.c << _LT_EOF int forced_loaded() { return 2;} _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD cat > conftest.c << _LT_EOF int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&AS_MESSAGE_LOG_FD elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then lt_cv_ld_force_load=yes else cat conftest.err >&AS_MESSAGE_LOG_FD fi rm -f conftest.err libconftest.a conftest conftest.c rm -rf conftest.dSYM ]) case $host_os in rhapsody* | darwin1.[[012]]) _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; 10.[[012]][[,.]]*) _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test yes = "$lt_cv_apple_cc_single_mod"; then _lt_dar_single_mod='$single_module' fi if test yes = "$lt_cv_ld_exported_symbols_list"; then _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' fi if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac ]) # _LT_DARWIN_LINKER_FEATURES([TAG]) # --------------------------------- # Checks for linker and compiler features on darwin m4_defun([_LT_DARWIN_LINKER_FEATURES], [ m4_require([_LT_REQUIRED_DARWIN_CHECKS]) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported if test yes = "$lt_cv_ld_force_load"; then _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) else _LT_TAGVAR(whole_archive_flag_spec, $1)='' fi _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined case $cc_basename in ifort*|nagfor*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test yes = "$_lt_dar_can_shared"; then output_verbose_link_cmd=func_echo_all _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" m4_if([$1], [CXX], [ if test yes != "$lt_cv_apple_cc_single_mod"; then _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil" fi ],[]) else _LT_TAGVAR(ld_shlibs, $1)=no fi ]) # _LT_SYS_MODULE_PATH_AIX([TAGNAME]) # ---------------------------------- # Links a minimal program and checks the executable # for the system default hardcoded library path. In most cases, # this is /usr/lib:/lib, but when the MPI compilers are used # the location of the communication and MPI libs are included too. # If we don't find anything, use the default library path according # to the aix ld manual. # Store the results from the different compilers for each TAGNAME. # Allow to override them for all tags through lt_cv_aix_libpath. m4_defun([_LT_SYS_MODULE_PATH_AIX], [m4_require([_LT_DECL_SED])dnl if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ lt_aix_libpath_sed='[ /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }]' _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi],[]) if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib fi ]) aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) fi ])# _LT_SYS_MODULE_PATH_AIX # _LT_SHELL_INIT(ARG) # ------------------- m4_define([_LT_SHELL_INIT], [m4_divert_text([M4SH-INIT], [$1 ])])# _LT_SHELL_INIT # _LT_PROG_ECHO_BACKSLASH # ----------------------- # Find how we can fake an echo command that does not interpret backslash. # In particular, with Autoconf 2.60 or later we add some code to the start # of the generated configure script that will find a shell with a builtin # printf (that we can use as an echo command). m4_defun([_LT_PROG_ECHO_BACKSLASH], [ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO AC_MSG_CHECKING([how to print strings]) # Test print first, because it will be a builtin if present. if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='print -r --' elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='printf %s\n' else # Use this function as a fallback that always works. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $[]1 _LTECHO_EOF' } ECHO='func_fallback_echo' fi # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "$*" } case $ECHO in printf*) AC_MSG_RESULT([printf]) ;; print*) AC_MSG_RESULT([print -r]) ;; *) AC_MSG_RESULT([cat]) ;; esac m4_ifdef([_AS_DETECT_SUGGESTED], [_AS_DETECT_SUGGESTED([ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test "X`printf %s $ECHO`" = "X$ECHO" \ || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) _LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) ])# _LT_PROG_ECHO_BACKSLASH # _LT_WITH_SYSROOT # ---------------- AC_DEFUN([_LT_WITH_SYSROOT], [AC_MSG_CHECKING([for sysroot]) AC_ARG_WITH([sysroot], [AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@], [Search for dependent libraries within DIR (or the compiler's sysroot if not specified).])], [], [with_sysroot=no]) dnl lt_sysroot will always be passed unquoted. We quote it here dnl in case the user passed a directory name. lt_sysroot= case $with_sysroot in #( yes) if test yes = "$GCC"; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( *) AC_MSG_RESULT([$with_sysroot]) AC_MSG_ERROR([The sysroot must be an absolute path.]) ;; esac AC_MSG_RESULT([${lt_sysroot:-no}]) _LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl [dependent libraries, and where our libraries should be installed.])]) # _LT_ENABLE_LOCK # --------------- m4_defun([_LT_ENABLE_LOCK], [AC_ARG_ENABLE([libtool-lock], [AS_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) test no = "$enable_libtool_lock" || enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out what ABI is being produced by ac_compile, and set mode # options accordingly. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE=32 ;; *ELF-64*) HPUX_IA64_MODE=64 ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out what ABI is being produced by ac_compile, and set linker # options accordingly. echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then if test yes = "$lt_cv_prog_gnu_ld"; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; mips64*-*linux*) # Find out what ABI is being produced by ac_compile, and set linker # options accordingly. echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then emul=elf case `/usr/bin/file conftest.$ac_objext` in *32-bit*) emul="${emul}32" ;; *64-bit*) emul="${emul}64" ;; esac case `/usr/bin/file conftest.$ac_objext` in *MSB*) emul="${emul}btsmip" ;; *LSB*) emul="${emul}ltsmip" ;; esac case `/usr/bin/file conftest.$ac_objext` in *N32*) emul="${emul}n32" ;; esac LD="${LD-ld} -m $emul" fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out what ABI is being produced by ac_compile, and set linker # options accordingly. Note that the listed cases only cover the # situations where additional linker options are needed (such as when # doing 32-bit compilation for a host where ld defaults to 64-bit, or # vice versa); the common cases where no linker options are needed do # not appear in the list. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) case `/usr/bin/file conftest.o` in *x86-64*) LD="${LD-ld} -m elf32_x86_64" ;; *) LD="${LD-ld} -m elf_i386" ;; esac ;; powerpc64le-*linux*) LD="${LD-ld} -m elf32lppclinux" ;; powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; powerpcle-*linux*) LD="${LD-ld} -m elf64lppc" ;; powerpc-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS=$CFLAGS CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_PUSH(C) AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_POP]) if test yes != "$lt_cv_cc_needs_belf"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS=$SAVE_CFLAGS fi ;; *-*solaris*) # Find out what ABI is being produced by ac_compile, and set linker # options accordingly. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) case $host in i?86-*-solaris*|x86_64-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) LD="${LD-ld} -m elf64_sparc" ;; esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then LD=${LD-ld}_sol2 fi ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks=$enable_libtool_lock ])# _LT_ENABLE_LOCK # _LT_PROG_AR # ----------- m4_defun([_LT_PROG_AR], [AC_CHECK_TOOLS(AR, [ar], false) : ${AR=ar} : ${AR_FLAGS=cru} _LT_DECL([], [AR], [1], [The archiver]) _LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], [lt_cv_ar_at_file=no AC_COMPILE_IFELSE([AC_LANG_PROGRAM], [echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' AC_TRY_EVAL([lt_ar_try]) if test 0 -eq "$ac_status"; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a AC_TRY_EVAL([lt_ar_try]) if test 0 -ne "$ac_status"; then lt_cv_ar_at_file=@ fi fi rm -f conftest.* libconftest.a ]) ]) if test no = "$lt_cv_ar_at_file"; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file fi _LT_DECL([], [archiver_list_spec], [1], [How to feed a file listing to the archiver]) ])# _LT_PROG_AR # _LT_CMD_OLD_ARCHIVE # ------------------- m4_defun([_LT_CMD_OLD_ARCHIVE], [_LT_PROG_AR AC_CHECK_TOOL(STRIP, strip, :) test -z "$STRIP" && STRIP=: _LT_DECL([], [STRIP], [1], [A symbol stripping program]) AC_CHECK_TOOL(RANLIB, ranlib, :) test -z "$RANLIB" && RANLIB=: _LT_DECL([], [RANLIB], [1], [Commands used to install an old-style archive]) # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in bitrig* | openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" fi case $host_os in darwin*) lock_old_archive_extraction=yes ;; *) lock_old_archive_extraction=no ;; esac _LT_DECL([], [old_postinstall_cmds], [2]) _LT_DECL([], [old_postuninstall_cmds], [2]) _LT_TAGDECL([], [old_archive_cmds], [2], [Commands used to build an old-style archive]) _LT_DECL([], [lock_old_archive_extraction], [0], [Whether to use a lock for old archive extraction]) ])# _LT_CMD_OLD_ARCHIVE # _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------------------- # Check whether the given compiler option works AC_DEFUN([_LT_COMPILER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi fi $RM conftest* ]) if test yes = "[$]$2"; then m4_if([$5], , :, [$5]) else m4_if([$6], , :, [$6]) fi ])# _LT_COMPILER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) # _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------- # Check whether the given linker option works AC_DEFUN([_LT_LINKER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS $3" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi else $2=yes fi fi $RM -r conftest* LDFLAGS=$save_LDFLAGS ]) if test yes = "[$]$2"; then m4_if([$4], , :, [$4]) else m4_if([$5], , :, [$5]) fi ])# _LT_LINKER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) # LT_CMD_MAX_LEN #--------------- AC_DEFUN([LT_CMD_MAX_LEN], [AC_REQUIRE([AC_CANONICAL_HOST])dnl # find the maximum length of command line arguments AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 teststring=ABCD case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; mint*) # On MiNT this can take a long time and run out of memory. lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; os2*) # The test takes a long time on OS/2. lt_cv_sys_max_cmd_len=8192 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len" && \ test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test X`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && test 17 != "$i" # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac ]) if test -n "$lt_cv_sys_max_cmd_len"; then AC_MSG_RESULT($lt_cv_sys_max_cmd_len) else AC_MSG_RESULT(none) fi max_cmd_len=$lt_cv_sys_max_cmd_len _LT_DECL([], [max_cmd_len], [0], [What is the maximum length of a command?]) ])# LT_CMD_MAX_LEN # Old name: AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) # _LT_HEADER_DLFCN # ---------------- m4_defun([_LT_HEADER_DLFCN], [AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl ])# _LT_HEADER_DLFCN # _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) # ---------------------------------------------------------------- m4_defun([_LT_TRY_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test yes = "$cross_compiling"; then : [$4] else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF [#line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; }] _LT_EOF if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; x$lt_dlneed_uscore) $2 ;; x$lt_dlunknown|x*) $3 ;; esac else : # compilation failed $3 fi fi rm -fr conftest* ])# _LT_TRY_DLOPEN_SELF # LT_SYS_DLOPEN_SELF # ------------------ AC_DEFUN([LT_SYS_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test yes != "$enable_dlopen"; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen=load_add_on lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen=LoadLibrary lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen=dlopen lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[ lt_cv_dlopen=dyld lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ]) ;; tpf*) # Don't try to run any link tests for TPF. We know it's impossible # because TPF is a cross-compiler, and we know how we open DSOs. lt_cv_dlopen=dlopen lt_cv_dlopen_libs= lt_cv_dlopen_self=no ;; *) AC_CHECK_FUNC([shl_load], [lt_cv_dlopen=shl_load], [AC_CHECK_LIB([dld], [shl_load], [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld], [AC_CHECK_FUNC([dlopen], [lt_cv_dlopen=dlopen], [AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl], [AC_CHECK_LIB([svld], [dlopen], [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld], [AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld]) ]) ]) ]) ]) ]) ;; esac if test no = "$lt_cv_dlopen"; then enable_dlopen=no else enable_dlopen=yes fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS=$CPPFLAGS test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS=$LDFLAGS wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS=$LIBS LIBS="$lt_cv_dlopen_libs $LIBS" AC_CACHE_CHECK([whether a program can dlopen itself], lt_cv_dlopen_self, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) if test yes = "$lt_cv_dlopen_self"; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ]) fi CPPFLAGS=$save_CPPFLAGS LDFLAGS=$save_LDFLAGS LIBS=$save_LIBS ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi _LT_DECL([dlopen_support], [enable_dlopen], [0], [Whether dlopen is supported]) _LT_DECL([dlopen_self], [enable_dlopen_self], [0], [Whether dlopen of programs is supported]) _LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], [Whether dlopen of statically linked programs is supported]) ])# LT_SYS_DLOPEN_SELF # Old name: AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) # _LT_COMPILER_C_O([TAGNAME]) # --------------------------- # Check to see if options -c and -o are simultaneously supported by compiler. # This macro does not hard code the compiler like AC_PROG_CC_C_O. m4_defun([_LT_COMPILER_C_O], [m4_require([_LT_DECL_SED])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi chmod u+w . 2>&AS_MESSAGE_LOG_FD $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* ]) _LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], [Does compiler simultaneously support -c and -o options?]) ])# _LT_COMPILER_C_O # _LT_COMPILER_FILE_LOCKS([TAGNAME]) # ---------------------------------- # Check to see if we can do hard links to lock some files if needed m4_defun([_LT_COMPILER_FILE_LOCKS], [m4_require([_LT_ENABLE_LOCK])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_COMPILER_C_O([$1]) hard_links=nottested if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no AC_MSG_RESULT([$hard_links]) if test no = "$hard_links"; then AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe]) need_locks=warn fi else need_locks=no fi _LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) ])# _LT_COMPILER_FILE_LOCKS # _LT_CHECK_OBJDIR # ---------------- m4_defun([_LT_CHECK_OBJDIR], [AC_CACHE_CHECK([for objdir], [lt_cv_objdir], [rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null]) objdir=$lt_cv_objdir _LT_DECL([], [objdir], [0], [The name of the directory that contains temporary libtool files])dnl m4_pattern_allow([LT_OBJDIR])dnl AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/", [Define to the sub-directory where libtool stores uninstalled libraries.]) ])# _LT_CHECK_OBJDIR # _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) # -------------------------------------- # Check hardcoding attributes. m4_defun([_LT_LINKER_HARDCODE_LIBPATH], [AC_MSG_CHECKING([how to hardcode library paths into programs]) _LT_TAGVAR(hardcode_action, $1)= if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || test -n "$_LT_TAGVAR(runpath_var, $1)" || test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then # We can hardcode non-existent directories. if test no != "$_LT_TAGVAR(hardcode_direct, $1)" && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" && test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then # Linking always hardcodes the temporary library directory. _LT_TAGVAR(hardcode_action, $1)=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. _LT_TAGVAR(hardcode_action, $1)=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. _LT_TAGVAR(hardcode_action, $1)=unsupported fi AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) if test relink = "$_LT_TAGVAR(hardcode_action, $1)" || test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then # Fast installation is not supported enable_fast_install=no elif test yes = "$shlibpath_overrides_runpath" || test no = "$enable_shared"; then # Fast installation is not necessary enable_fast_install=needless fi _LT_TAGDECL([], [hardcode_action], [0], [How to hardcode a shared library path into an executable]) ])# _LT_LINKER_HARDCODE_LIBPATH # _LT_CMD_STRIPLIB # ---------------- m4_defun([_LT_CMD_STRIPLIB], [m4_require([_LT_DECL_EGREP]) striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" AC_MSG_RESULT([yes]) else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP"; then striplib="$STRIP -x" old_striplib="$STRIP -S" AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi ;; *) AC_MSG_RESULT([no]) ;; esac fi _LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) _LT_DECL([], [striplib], [1]) ])# _LT_CMD_STRIPLIB # _LT_PREPARE_MUNGE_PATH_LIST # --------------------------- # Make sure func_munge_path_list() is defined correctly. m4_defun([_LT_PREPARE_MUNGE_PATH_LIST], [[# func_munge_path_list VARIABLE PATH # ----------------------------------- # VARIABLE is name of variable containing _space_ separated list of # directories to be munged by the contents of PATH, which is string # having a format: # "DIR[:DIR]:" # string "DIR[ DIR]" will be prepended to VARIABLE # ":DIR[:DIR]" # string "DIR[ DIR]" will be appended to VARIABLE # "DIRP[:DIRP]::[DIRA:]DIRA" # string "DIRP[ DIRP]" will be prepended to VARIABLE and string # "DIRA[ DIRA]" will be appended to VARIABLE # "DIR[:DIR]" # VARIABLE will be replaced by "DIR[ DIR]" func_munge_path_list () { case x@S|@2 in x) ;; *:) eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\" ;; x:*) eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\" ;; *::*) eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\" ;; *) eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\" ;; esac } ]])# _LT_PREPARE_PATH_LIST # _LT_SYS_DYNAMIC_LINKER([TAG]) # ----------------------------- # PORTME Fill in your ld.so characteristics m4_defun([_LT_SYS_DYNAMIC_LINKER], [AC_REQUIRE([AC_CANONICAL_HOST])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_OBJDUMP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl AC_MSG_CHECKING([dynamic linker characteristics]) m4_if([$1], [], [ if test yes = "$GCC"; then case $host_os in darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; *) lt_awk_arg='/^libraries:/' ;; esac case $host_os in mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;; *) lt_sed_strip_eq='s|=/|/|g' ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` ;; *) lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` ;; esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary... lt_tmp_lt_search_path_spec= lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` # ...but if some path component already ends with the multilib dir we assume # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). case "$lt_multi_os_dir; $lt_search_path_spec " in "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) lt_multi_os_dir= ;; esac for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" elif test -n "$lt_multi_os_dir"; then test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS = " "; FS = "/|\n";} { lt_foo = ""; lt_count = 0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo = "/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[[lt_foo]]++; } if (lt_freq[[lt_foo]] == 1) { print lt_foo; } }'` # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi]) library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=.so postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown AC_ARG_VAR([LT_SYS_LIBRARY_PATH], [User-defined run-time library search path.]) case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$release$shared_ext$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='$libname$release$shared_ext$major' ;; aix[[4-9]]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes if test ia64 = "$host_cpu"; then # AIX 5 supports IA64 library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line '#! .'. This would cause the generated library to # depend on '.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[[01]] | aix4.[[01]].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # Using Import Files as archive members, it is possible to support # filename-based versioning of shared library archives on AIX. While # this would work for both with and without runtime linking, it will # prevent static linking of such archives. So we do filename-based # shared library versioning with .so extension only, which is used # when both runtime linking and shared linking is enabled. # Unfortunately, runtime linking may impact performance, so we do # not want this to be the default eventually. Also, we use the # versioned .so libs for executables only if there is the -brtl # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. # To allow for filename-based versioning support, we need to create # libNAME.so.V as an archive file, containing: # *) an Import File, referring to the versioned filename of the # archive as well as the shared archive member, telling the # bitwidth (32 or 64) of that shared object, and providing the # list of exported symbols of that shared object, eventually # decorated with the 'weak' keyword # *) the shared object with the F_LOADONLY flag set, to really avoid # it being seen by the linker. # At run time we better use the real file rather than another symlink, # but for link time we create the symlink libNAME.so -> libNAME.so.V case $with_aix_soname,$aix_use_runtimelinking in # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. aix,yes) # traditional libtool dynamic_linker='AIX unversionable lib.so' # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' ;; aix,no) # traditional AIX only dynamic_linker='AIX lib.a[(]lib.so.V[)]' # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='$libname$release.a $libname.a' soname_spec='$libname$release$shared_ext$major' ;; svr4,*) # full svr4 only dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]" library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' # We do not specify a path in Import Files, so LIBPATH fires. shlibpath_overrides_runpath=yes ;; *,yes) # both, prefer svr4 dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]" library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' # unpreferred sharedlib libNAME.a needs extra handling postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' # We do not specify a path in Import Files, so LIBPATH fires. shlibpath_overrides_runpath=yes ;; *,no) # both, prefer aix dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]" library_names_spec='$libname$release.a $libname.a' soname_spec='$libname$release$shared_ext$major' # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' ;; esac shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='$libname$shared_ext' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[[45]]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=.dll need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \$file`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' library_names_spec='$libname.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec=$LIB if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \$file`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' soname_spec='$libname$release$major$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[[23]].*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[[01]]* | freebsdelf3.[[01]]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=no sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' if test 32 = "$HPUX_IA64_MODE"; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" sys_lib_dlsearch_path_spec=/usr/lib/hpux32 else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" sys_lib_dlsearch_path_spec=/usr/lib/hpux64 fi ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[[3-9]]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test yes = "$lt_cv_prog_gnu_ld"; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='$libname$release$shared_ext$major' library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; linux*android*) version_type=none # Android doesn't support versioned libraries. need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext' soname_spec='$libname$release$shared_ext' finish_cmds= shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes dynamic_linker='Android linker' # Don't embed -rpath directories since the linker doesn't support them. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], [lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], [lt_cv_shlibpath_overrides_runpath=yes])]) LDFLAGS=$save_LDFLAGS libdir=$save_libdir ]) shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Ideally, we could use ldconfig to report *all* directores which are # searched for libraries, however this is still not possible. Aside from not # being certain /sbin/ldconfig is available, command # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, # even though it is searched at run-time. Try to do the best guess by # appending ld.so.conf contents (and includes) to the search path. if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd* | bitrig*) version_type=sunos sys_lib_dlsearch_path_spec=/usr/lib need_lib_prefix=no if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then need_version=no else need_version=yes fi library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; os2*) libname_spec='$name' version_type=windows shrext_cmds=.dll need_version=no need_lib_prefix=no # OS/2 can only load a DLL with a base name of 8 characters or less. soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; v=$($ECHO $release$versuffix | tr -d .-); n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); $ECHO $n$v`$shared_ext' library_names_spec='${libname}_dll.$libext' dynamic_linker='OS/2 ld.exe' shlibpath_var=BEGINLIBPATH sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec postinstall_cmds='base_file=`basename \$file`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='$libname$release$shared_ext$major' library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test yes = "$with_gnu_ld"; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec; then version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' soname_spec='$libname$shared_ext.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=sco need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test yes = "$with_gnu_ld"; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac AC_MSG_RESULT([$dynamic_linker]) test no = "$dynamic_linker" && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test yes = "$GCC"; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec fi if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec fi # remember unaugmented sys_lib_dlsearch_path content for libtool script decls... configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec # ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" # to be used as default LT_SYS_LIBRARY_PATH value in generated libtool configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH _LT_DECL([], [variables_saved_for_relink], [1], [Variables whose values should be saved in libtool wrapper scripts and restored at link time]) _LT_DECL([], [need_lib_prefix], [0], [Do we need the "lib" prefix for modules?]) _LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) _LT_DECL([], [version_type], [0], [Library versioning type]) _LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) _LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) _LT_DECL([], [shlibpath_overrides_runpath], [0], [Is shlibpath searched before the hard-coded library search path?]) _LT_DECL([], [libname_spec], [1], [Format of library name prefix]) _LT_DECL([], [library_names_spec], [1], [[List of archive names. First name is the real one, the rest are links. The last name is the one that the linker finds with -lNAME]]) _LT_DECL([], [soname_spec], [1], [[The coded name of the library, if different from the real name]]) _LT_DECL([], [install_override_mode], [1], [Permission mode override for installation of shared libraries]) _LT_DECL([], [postinstall_cmds], [2], [Command to use after installation of a shared archive]) _LT_DECL([], [postuninstall_cmds], [2], [Command to use after uninstallation of a shared archive]) _LT_DECL([], [finish_cmds], [2], [Commands used to finish a libtool library installation in a directory]) _LT_DECL([], [finish_eval], [1], [[As "finish_cmds", except a single script fragment to be evaled but not shown]]) _LT_DECL([], [hardcode_into_libs], [0], [Whether we should hardcode library paths into libraries]) _LT_DECL([], [sys_lib_search_path_spec], [2], [Compile-time system search path for libraries]) _LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2], [Detected run-time system search path for libraries]) _LT_DECL([], [configure_time_lt_sys_library_path], [2], [Explicit LT_SYS_LIBRARY_PATH set during ./configure time]) ])# _LT_SYS_DYNAMIC_LINKER # _LT_PATH_TOOL_PREFIX(TOOL) # -------------------------- # find a file program that can recognize shared library AC_DEFUN([_LT_PATH_TOOL_PREFIX], [m4_require([_LT_DECL_EGREP])dnl AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in [[\\/*] | ?:[\\/]*]) lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD=$MAGIC_CMD lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="m4_if([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$1"; then lt_cv_path_MAGIC_CMD=$ac_dir/"$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD=$lt_cv_path_MAGIC_CMD if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS=$lt_save_ifs MAGIC_CMD=$lt_save_MAGIC_CMD ;; esac]) MAGIC_CMD=$lt_cv_path_MAGIC_CMD if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi _LT_DECL([], [MAGIC_CMD], [0], [Used to examine libraries when file_magic_cmd begins with "file"])dnl ])# _LT_PATH_TOOL_PREFIX # Old name: AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) # _LT_PATH_MAGIC # -------------- # find a file program that can recognize a shared library m4_defun([_LT_PATH_MAGIC], [_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) else MAGIC_CMD=: fi fi ])# _LT_PATH_MAGIC # LT_PATH_LD # ---------- # find the pathname to the GNU or non-GNU linker AC_DEFUN([LT_PATH_LD], [AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_PROG_ECHO_BACKSLASH])dnl AC_ARG_WITH([gnu-ld], [AS_HELP_STRING([--with-gnu-ld], [assume the C compiler uses GNU ld @<:@default=no@:>@])], [test no = "$withval" || with_gnu_ld=yes], [with_gnu_ld=no])dnl ac_prog=ld if test yes = "$GCC"; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return, which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]]* | ?:[[\\/]]*) re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD=$ac_prog ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test yes = "$with_gnu_ld"; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD=$ac_dir/$ac_prog # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1 conftest.i cat conftest.i conftest.i >conftest2.i : ${lt_DD:=$DD} AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd], [if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then cmp -s conftest.i conftest.out \ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: fi]) rm -f conftest.i conftest2.i conftest.out]) ])# _LT_PATH_DD # _LT_CMD_TRUNCATE # ---------------- # find command to truncate a binary pipe m4_defun([_LT_CMD_TRUNCATE], [m4_require([_LT_PATH_DD]) AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin], [printf 0123456789abcdef0123456789abcdef >conftest.i cat conftest.i conftest.i >conftest2.i lt_cv_truncate_bin= if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then cmp -s conftest.i conftest.out \ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" fi rm -f conftest.i conftest2.i conftest.out test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"]) _LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1], [Command to truncate a binary pipe]) ])# _LT_CMD_TRUNCATE # _LT_CHECK_MAGIC_METHOD # ---------------------- # how to check for library dependencies # -- PORTME fill in with the dynamic library characteristics m4_defun([_LT_CHECK_MAGIC_METHOD], [m4_require([_LT_DECL_EGREP]) m4_require([_LT_DECL_OBJDUMP]) AC_CACHE_CHECK([how to recognize dependent libraries], lt_cv_deplibs_check_method, [lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # 'unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # that responds to the $file_magic_cmd with a given extended regex. # If you have 'file' or equivalent on your system and you're not sure # whether 'pass_all' will *always* work, you probably want this one. case $host_os in aix[[4-9]]*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi[[45]]*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin*) # func_win32_libid is a shell function defined in ltmain.sh lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' ;; mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc*) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; haiku*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[[3-9]]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd* | bitrig*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; os2*) lt_cv_deplibs_check_method=pass_all ;; esac ]) file_magic_glob= want_nocaseglob=no if test "$build" = "$host"; then case $host_os in mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` fi ;; esac fi file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown _LT_DECL([], [deplibs_check_method], [1], [Method to check whether dependent libraries are shared objects]) _LT_DECL([], [file_magic_cmd], [1], [Command to use when deplibs_check_method = "file_magic"]) _LT_DECL([], [file_magic_glob], [1], [How to find potential files when deplibs_check_method = "file_magic"]) _LT_DECL([], [want_nocaseglob], [1], [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) ])# _LT_CHECK_MAGIC_METHOD # LT_PATH_NM # ---------- # find the pathname to a BSD- or MS-compatible name lister AC_DEFUN([LT_PATH_NM], [AC_REQUIRE([AC_PROG_CC])dnl AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM=$NM else lt_nm_to_check=${ac_tool_prefix}nm if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. tmp_nm=$ac_dir/$lt_tmp_nm if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then # Check to see if the nm accepts a BSD-compat flag. # Adding the 'sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty case $build_os in mingw*) lt_bad_file=conftest.nm/nofile ;; *) lt_bad_file=/dev/null ;; esac case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in *$lt_bad_file* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break 2 ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break 2 ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS=$lt_save_ifs done : ${lt_cv_path_NM=no} fi]) if test no != "$lt_cv_path_NM"; then NM=$lt_cv_path_NM else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols -headers" ;; *) DUMPBIN=: ;; esac fi AC_SUBST([DUMPBIN]) if test : != "$DUMPBIN"; then NM=$DUMPBIN fi fi test -z "$NM" && NM=nm AC_SUBST([NM]) _LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], [lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) cat conftest.out >&AS_MESSAGE_LOG_FD if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest*]) ])# LT_PATH_NM # Old names: AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_PROG_NM], []) dnl AC_DEFUN([AC_PROG_NM], []) # _LT_CHECK_SHAREDLIB_FROM_LINKLIB # -------------------------------- # how to determine the name of the shared library # associated with a specific link library. # -- PORTME fill in with the dynamic library characteristics m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], [m4_require([_LT_DECL_EGREP]) m4_require([_LT_DECL_OBJDUMP]) m4_require([_LT_DECL_DLLTOOL]) AC_CACHE_CHECK([how to associate runtime and link libraries], lt_cv_sharedlib_from_linklib_cmd, [lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh; # decide which one to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; esac ;; *) # fallback: assume linklib IS sharedlib lt_cv_sharedlib_from_linklib_cmd=$ECHO ;; esac ]) sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO _LT_DECL([], [sharedlib_from_linklib_cmd], [1], [Command to associate shared and link libraries]) ])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB # _LT_PATH_MANIFEST_TOOL # ---------------------- # locate the manifest tool m4_defun([_LT_PATH_MANIFEST_TOOL], [AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], [lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&AS_MESSAGE_LOG_FD if $GREP 'Manifest Tool' conftest.out > /dev/null; then lt_cv_path_mainfest_tool=yes fi rm -f conftest*]) if test yes != "$lt_cv_path_mainfest_tool"; then MANIFEST_TOOL=: fi _LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl ])# _LT_PATH_MANIFEST_TOOL # _LT_DLL_DEF_P([FILE]) # --------------------- # True iff FILE is a Windows DLL '.def' file. # Keep in sync with func_dll_def_p in the libtool script AC_DEFUN([_LT_DLL_DEF_P], [dnl test DEF = "`$SED -n dnl -e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace -e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments -e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl -e q dnl Only consider the first "real" line $1`" dnl ])# _LT_DLL_DEF_P # LT_LIB_M # -------- # check for math library AC_DEFUN([LT_LIB_M], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw) AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, cos, LIBM=-lm) ;; esac AC_SUBST([LIBM]) ])# LT_LIB_M # Old name: AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_CHECK_LIBM], []) # _LT_COMPILER_NO_RTTI([TAGNAME]) # ------------------------------- m4_defun([_LT_COMPILER_NO_RTTI], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= if test yes = "$GCC"; then case $cc_basename in nvcc*) _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; *) _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; esac _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], lt_cv_prog_compiler_rtti_exceptions, [-fno-rtti -fno-exceptions], [], [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) fi _LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], [Compiler flag to turn off builtin functions]) ])# _LT_COMPILER_NO_RTTI # _LT_CMD_GLOBAL_SYMBOLS # ---------------------- m4_defun([_LT_CMD_GLOBAL_SYMBOLS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([LT_PATH_NM])dnl AC_REQUIRE([LT_PATH_LD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_TAG_COMPILER])dnl # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output from $compiler object]) AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [ # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[[BCDEGRST]]' # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[[BCDT]]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[[ABCDGISTW]]' ;; hpux*) if test ia64 = "$host_cpu"; then symcode='[[ABCDEGRST]]' fi ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; osf*) symcode='[[BCDEGQRST]]' ;; solaris*) symcode='[[BDRT]]' ;; sco3.2v5*) symcode='[[DT]]' ;; sysv4.2uw2*) symcode='[[DT]]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[[ABDT]]' ;; sysv4) symcode='[[DFNSTU]]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[[ABCDGIRSTW]]' ;; esac if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Gets list of data symbols to import. lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" # Adjust the below global symbol transforms to fixup imported variables. lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" lt_c_name_lib_hook="\ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" else # Disable hooks by default. lt_cv_sys_global_symbol_to_import= lt_cdecl_hook= lt_c_name_hook= lt_c_name_lib_hook= fi # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n"\ $lt_cdecl_hook\ " -e 's/^T .* \(.*\)$/extern int \1();/p'"\ " -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ $lt_c_name_hook\ " -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ " -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" # Transform an extracted symbol line into symbol name with lib prefix and # symbol address. lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ $lt_c_name_lib_hook\ " -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ " -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ " -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function, # D for any global variable and I for any imported variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK ['"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ " /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ " /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ " {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ " s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx]" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if AC_TRY_EVAL(ac_compile); then # Now try to grab the symbols. nlist=conftest.nm if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE /* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT@&t@_DLSYM_CONST #elif defined __osf__ /* This system does not cope well with relocations in const data. */ # define LT@&t@_DLSYM_CONST #else # define LT@&t@_DLSYM_CONST const #endif #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ LT@&t@_DLSYM_CONST struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[[]] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS LIBS=conftstm.$ac_objext CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD fi else echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test yes = "$pipe_works"; then break else lt_cv_sys_global_symbol_pipe= fi done ]) if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then AC_MSG_RESULT(failed) else AC_MSG_RESULT(ok) fi # Response file support. if test "$lt_cv_nm_interface" = "MS dumpbin"; then nm_file_list_spec='@' elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then nm_file_list_spec='@' fi _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], [Take the output of nm and produce a listing of raw symbols and C names]) _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], [Transform the output of nm in a proper C declaration]) _LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1], [Transform the output of nm into a list of symbols to manually relocate]) _LT_DECL([global_symbol_to_c_name_address], [lt_cv_sys_global_symbol_to_c_name_address], [1], [Transform the output of nm in a C name address pair]) _LT_DECL([global_symbol_to_c_name_address_lib_prefix], [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], [Transform the output of nm in a C name address pair when lib prefix is needed]) _LT_DECL([nm_interface], [lt_cv_nm_interface], [1], [The name lister interface]) _LT_DECL([], [nm_file_list_spec], [1], [Specify filename containing input files for $NM]) ]) # _LT_CMD_GLOBAL_SYMBOLS # _LT_COMPILER_PIC([TAGNAME]) # --------------------------- m4_defun([_LT_COMPILER_PIC], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_wl, $1)= _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)= m4_if([$1], [CXX], [ # C++ specific cases for pic, static, wl, etc. if test yes = "$GXX"; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the '-m68020' flag to GCC prevents building anything better, # like '-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) case $host_os in os2*) _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' ;; esac ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. _LT_TAGVAR(lt_prog_compiler_static, $1)= ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else case $host_os in aix[[4-9]]*) # All AIX code is PIC. if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; dgux*) case $cc_basename in ec++*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; ghcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' if test ia64 != "$host_cpu"; then _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; aCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # KAI C++ Compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; ecpc* ) # old Intel C++ for x86_64, which still supported -KPIC. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; icpc* ) # Intel C++, used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL 8.0, 9.0 on PPC and BlueGene _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ;; *) ;; esac ;; netbsd* | netbsdelf*-gnu) ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; cxx*) # Digital/Compaq C++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; lcc*) # Lucid _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; *) ;; esac ;; vxworks*) ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ], [ if test yes = "$GCC"; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the '-m68020' flag to GCC prevents building anything better, # like '-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) case $host_os in os2*) _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' ;; esac ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. _LT_TAGVAR(lt_prog_compiler_static, $1)= ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac case $cc_basename in nvcc*) # Cuda Compiler Driver 2.2 _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" fi ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' case $cc_basename in nagfor*) # NAG Fortran compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) case $host_os in os2*) _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' ;; esac ;; hpux9* | hpux10* | hpux11*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC (with -KPIC) is the default. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in # old Intel for x86_64, which still supported -KPIC. ecc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # Lahey Fortran 8.1. lf95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' ;; nagfor*) # NAG Fortran compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; tcc*) # Fabrice Bellard et al's Tiny C Compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; ccc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All Alpha code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xl* | bgxl* | bgf* | mpixl*) # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) # Sun Fortran 8.3 passes all unrecognized flags to the linker _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='' ;; *Sun\ F* | *Sun*Fortran*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; *Intel*\ [[CF]]*Compiler*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; *Portland\ Group*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; esac ;; newsos6) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All OSF/1 code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; rdos*) _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; solaris*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' case $cc_basename in f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; *) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; esac ;; sunos4*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; unicos*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; uts4*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ]) case $host_os in # For platforms that do not support PIC, -DPIC is meaningless: *djgpp*) _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" ;; esac AC_CACHE_CHECK([for $compiler option to produce PIC], [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) _LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) # # Check to make sure the PIC flag actually works. # if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in "" | " "*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; esac], [_LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) fi _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], [Additional compiler flags for building library objects]) _LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], [How to pass a linker flag through the compiler]) # # Check to make sure the static flag actually works. # wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" _LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), $lt_tmp_static_flag, [], [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) _LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], [Compiler flag to prevent dynamic linking]) ])# _LT_COMPILER_PIC # _LT_LINKER_SHLIBS([TAGNAME]) # ---------------------------- # See if the linker supports building shared libraries. m4_defun([_LT_LINKER_SHLIBS], [AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl m4_require([_LT_PATH_MANIFEST_TOOL])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) m4_if([$1], [CXX], [ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] case $host_os in aix[[4-9]]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to GNU nm, but means don't demangle to AIX nm. # Without the "-l" option, or with the "-B" option, AIX nm treats # weak defined symbols like other global defined symbols, whereas # GNU nm marks them as "W". # While the 'weak' keyword is ignored in the Export File, we need # it in the Import File for the 'aix-soname' feature, so we have # to replace the "-B" option with "-P" for AIX nm. if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi ;; pw32*) _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds ;; cygwin* | mingw* | cegcc*) case $cc_basename in cl*) _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] ;; esac ;; linux* | k*bsd*-gnu | gnu*) _LT_TAGVAR(link_all_deplibs, $1)=no ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac ], [ runpath_var= _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_cmds, $1)= _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(old_archive_from_new_cmds, $1)= _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= _LT_TAGVAR(thread_safe_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list _LT_TAGVAR(include_expsyms, $1)= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ' (' and ')$', so one must not match beginning or # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', # as well as any symbol that contains 'd'. _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. dnl Note also adjust exclude_expsyms for C++ above. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test yes != "$GCC"; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd* | bitrig*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) _LT_TAGVAR(link_all_deplibs, $1)=no ;; esac _LT_TAGVAR(ld_shlibs, $1)=yes # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no if test yes = "$with_gnu_ld"; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility # with the native linker. However, as the warning in the GNU ld # block says, versions before 2.19.5* couldn't really create working # shared libraries, regardless of the interface used. case `$LD -v 2>&1` in *\ \(GNU\ Binutils\)\ 2.19.5*) ;; *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; *) lt_use_gnu_ld_interface=yes ;; esac ;; *) lt_use_gnu_ld_interface=yes ;; esac fi if test yes = "$lt_use_gnu_ld_interface"; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='$wl' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi supports_anon_versioning=no case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[[3-9]]*) # On AIX/PPC, the GNU linker is very broken if test ia64 != "$host_cpu"; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to install binutils *** 2.20 or above, or modify your PATH so that a non-GNU linker is found. *** You will then need to restart the configuration process. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file, use it as # is; otherwise, prepend EXPORTS... _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; os2*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=unsupported shrext_cmds=.dll _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ prefix_cmds="$SED"~ if test EXPORTS = "`$SED 1q $export_symbols`"; then prefix_cmds="$prefix_cmds -e 1d"; fi~ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test linux-dietlibc = "$host_os"; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test no = "$tmp_diet" then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 _LT_TAGVAR(whole_archive_flag_spec, $1)= tmp_sharedflag='--shared' ;; nagfor*) # NAGFOR 5.3 tmp_sharedflag='-Wl,-shared' ;; xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' if test yes = "$supports_anon_versioning"; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi case $cc_basename in tcc*) _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic' ;; xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test yes = "$supports_anon_versioning"; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; sunos4*) _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then runpath_var= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. _LT_TAGVAR(hardcode_minus_L, $1)=yes if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. _LT_TAGVAR(hardcode_direct, $1)=unsupported fi ;; aix[[4-9]]*) if test ia64 = "$host_cpu"; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag= else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to GNU nm, but means don't demangle to AIX nm. # Without the "-l" option, or with the "-B" option, AIX nm treats # weak defined symbols like other global defined symbols, whereas # GNU nm marks them as "W". # While the 'weak' keyword is ignored in the Export File, we need # it in the Import File for the 'aix-soname' feature, so we have # to replace the "-B" option with "-P" for AIX nm. if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # have runtime linking enabled, and use it for executables. # For shared libraries, we enable/disable runtime linking # depending on the kind of the shared library created - # when "with_aix_soname,aix_use_runtimelinking" is: # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables # "aix,yes" lib.so shared, rtl:yes, for executables # lib.a static archive # "both,no" lib.so.V(shr.o) shared, rtl:yes # lib.a(lib.so.V) shared, rtl:no, for executables # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables # lib.a(lib.so.V) shared, rtl:no # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables # lib.a static archive case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then aix_use_runtimelinking=yes break fi done if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then # With aix-soname=svr4, we create the lib.so.V shared archives only, # so we don't have lib.a shared libs to link our executables. # We have to force runtime linking in this case. aix_use_runtimelinking=yes LDFLAGS="$LDFLAGS -Wl,-brtl" fi ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='$wl-f,' case $with_aix_soname,$aix_use_runtimelinking in aix,*) ;; # traditional, no import file svr4,* | *,yes) # use import file # The Import File defines what to hardcode. _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no ;; esac if test yes = "$GCC"; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`$CC -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi ;; esac shared_flag='-shared' if test yes = "$aix_use_runtimelinking"; then shared_flag="$shared_flag "'$wl-G' fi # Need to ensure runtime linking is disabled for the traditional # shared library, or the linker may eventually find shared libraries # /with/ Import File - we do not want to mix them. shared_flag_aix='-shared' shared_flag_svr4='-shared $wl-G' else # not using gcc if test ia64 = "$host_cpu"; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test yes = "$aix_use_runtimelinking"; then shared_flag='$wl-G' else shared_flag='$wl-bM:SRE' fi shared_flag_aix='$wl-bM:SRE' shared_flag_svr4='$wl-G' fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_TAGVAR(always_export_symbols, $1)=yes if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag else if test ia64 = "$host_cpu"; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok' if test yes = "$with_gnu_ld"; then # We only use this code for GNU lds that support --whole-archive. _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' # -brtl affects multiple linker settings, -berok does not and is overridden later compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`' if test svr4 != "$with_aix_soname"; then # This is similar to how AIX traditionally builds its shared libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' fi if test aix != "$with_aix_soname"; then _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' else # used by -dlpreopen to get the symbols _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir' fi _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; bsdi[[45]]*) _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in cl*) # Native MSVC _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(file_list_spec, $1)='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then cp "$export_symbols" "$output_objdir/$soname.def"; echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; else $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile=$lt_outputfile.exe lt_tool_outputfile=$lt_tool_outputfile.exe ;; esac~ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # Assume MSVC wrapper _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' # FIXME: Should let the user specify the lib program. _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; esac ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; dgux*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2.*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; hpux9*) if test yes = "$GCC"; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' else _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' ;; hpux10*) if test yes,no = "$GCC,$with_gnu_ld"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test no = "$with_gnu_ld"; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes fi ;; hpux11*) if test yes,no = "$GCC,$with_gnu_ld"; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) m4_if($1, [], [ # Older versions of the 11.00 compiler do not understand -b yet # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) _LT_LINKER_OPTION([if $CC understands -b], _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) ;; esac fi if test no = "$with_gnu_ld"; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test yes = "$GCC"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], [lt_cv_irix_exported_symbol], [save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" AC_LINK_IFELSE( [AC_LANG_SOURCE( [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], [C++], [[int foo (void) { return 0; }]], [Fortran 77], [[ subroutine foo end]], [Fortran], [[ subroutine foo end]])])], [lt_cv_irix_exported_symbol=yes], [lt_cv_irix_exported_symbol=no]) LDFLAGS=$save_LDFLAGS]) if test yes = "$lt_cv_irix_exported_symbol"; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' fi _LT_TAGVAR(link_all_deplibs, $1)=no else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes _LT_TAGVAR(link_all_deplibs, $1)=yes ;; linux*) case $cc_basename in tcc*) # Fabrice Bellard et al's Tiny C Compiler _LT_TAGVAR(ld_shlibs, $1)=yes _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; newsos6) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *nto* | *qnx*) ;; openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' fi else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; os2*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=unsupported shrext_cmds=.dll _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ prefix_cmds="$SED"~ if test EXPORTS = "`$SED 1q $export_symbols`"; then prefix_cmds="$prefix_cmds -e 1d"; fi~ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; osf3*) if test yes = "$GCC"; then _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test yes = "$GCC"; then _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; solaris*) _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' if test yes = "$GCC"; then wlarc='$wl' _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='$wl' _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands '-z linker_flag'. GCC discards it without '$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test yes = "$GCC"; then _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' else _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' fi ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes ;; sunos4*) if test sequent = "$host_vendor"; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4) case $host_vendor in sni) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' _LT_TAGVAR(hardcode_direct, $1)=no ;; motorola) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4.3*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes _LT_TAGVAR(ld_shlibs, $1)=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' if test yes = "$GCC"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We CANNOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport' runpath_var='LD_RUN_PATH' if test yes = "$GCC"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(ld_shlibs, $1)=no ;; esac if test sni = "$host_vendor"; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym' ;; esac fi fi ]) AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no _LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld _LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl _LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl _LT_DECL([], [extract_expsyms_cmds], [2], [The commands to extract the exported symbol list from a shared archive]) # # Do we need to explicitly link libc? # case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in x|xyes) # Assume -lc should be added _LT_TAGVAR(archive_cmds_need_lc, $1)=yes if test yes,yes = "$GCC,$enable_shared"; then case $_LT_TAGVAR(archive_cmds, $1) in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. AC_CACHE_CHECK([whether -lc should be explicitly linked in], [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), [$RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if AC_TRY_EVAL(ac_compile) 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) _LT_TAGVAR(allow_undefined_flag, $1)= if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) then lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no else lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes fi _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* ]) _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) ;; esac fi ;; esac _LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], [Whether or not to add -lc for building shared libraries]) _LT_TAGDECL([allow_libtool_libs_with_static_runtimes], [enable_shared_with_static_runtimes], [0], [Whether or not to disallow shared libs when runtime libs are static]) _LT_TAGDECL([], [export_dynamic_flag_spec], [1], [Compiler flag to allow reflexive dlopens]) _LT_TAGDECL([], [whole_archive_flag_spec], [1], [Compiler flag to generate shared objects directly from archives]) _LT_TAGDECL([], [compiler_needs_object], [1], [Whether the compiler copes with passing no objects directly]) _LT_TAGDECL([], [old_archive_from_new_cmds], [2], [Create an old-style archive from a shared archive]) _LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], [Create a temporary old-style archive to link instead of a shared archive]) _LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) _LT_TAGDECL([], [archive_expsym_cmds], [2]) _LT_TAGDECL([], [module_cmds], [2], [Commands used to build a loadable module if different from building a shared archive.]) _LT_TAGDECL([], [module_expsym_cmds], [2]) _LT_TAGDECL([], [with_gnu_ld], [1], [Whether we are building with GNU ld or not]) _LT_TAGDECL([], [allow_undefined_flag], [1], [Flag that allows shared libraries with undefined symbols to be built]) _LT_TAGDECL([], [no_undefined_flag], [1], [Flag that enforces no undefined symbols]) _LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], [Flag to hardcode $libdir into a binary during linking. This must work even if $libdir does not exist]) _LT_TAGDECL([], [hardcode_libdir_separator], [1], [Whether we need a single "-rpath" flag with a separated argument]) _LT_TAGDECL([], [hardcode_direct], [0], [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_direct_absolute], [0], [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes DIR into the resulting binary and the resulting library dependency is "absolute", i.e impossible to change by setting $shlibpath_var if the library is relocated]) _LT_TAGDECL([], [hardcode_minus_L], [0], [Set to "yes" if using the -LDIR flag during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_shlibpath_var], [0], [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_automatic], [0], [Set to "yes" if building a shared library automatically hardcodes DIR into the library and all subsequent libraries and executables linked against it]) _LT_TAGDECL([], [inherit_rpath], [0], [Set to yes if linker adds runtime paths of dependent libraries to runtime path list]) _LT_TAGDECL([], [link_all_deplibs], [0], [Whether libtool must link a program against all its dependency libraries]) _LT_TAGDECL([], [always_export_symbols], [0], [Set to "yes" if exported symbols are required]) _LT_TAGDECL([], [export_symbols_cmds], [2], [The commands to list exported symbols]) _LT_TAGDECL([], [exclude_expsyms], [1], [Symbols that should not be listed in the preloaded symbols]) _LT_TAGDECL([], [include_expsyms], [1], [Symbols that must always be exported]) _LT_TAGDECL([], [prelink_cmds], [2], [Commands necessary for linking programs (against libraries) with templates]) _LT_TAGDECL([], [postlink_cmds], [2], [Commands necessary for finishing linking programs]) _LT_TAGDECL([], [file_list_spec], [1], [Specify filename containing input files]) dnl FIXME: Not yet implemented dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], dnl [Compiler flag to generate thread safe objects]) ])# _LT_LINKER_SHLIBS # _LT_LANG_C_CONFIG([TAG]) # ------------------------ # Ensure that the configuration variables for a C compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to 'libtool'. m4_defun([_LT_LANG_C_CONFIG], [m4_require([_LT_DECL_EGREP])dnl lt_save_CC=$CC AC_LANG_PUSH(C) # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' _LT_TAG_COMPILER # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) LT_SYS_DLOPEN_SELF _LT_CMD_STRIPLIB # Report what library types will actually be built AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test no = "$can_build_shared" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test yes = "$enable_shared" && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test ia64 != "$host_cpu"; then case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in yes,aix,yes) ;; # shared object as lib.so file only yes,svr4,*) ;; # shared object as lib.so archive member only yes,*) enable_static=no ;; # shared object in lib.a archive as well esac fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test yes = "$enable_shared" || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_CONFIG($1) fi AC_LANG_POP CC=$lt_save_CC ])# _LT_LANG_C_CONFIG # _LT_LANG_CXX_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a C++ compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to 'libtool'. m4_defun([_LT_LANG_CXX_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_PATH_MANIFEST_TOOL])dnl if test -n "$CXX" && ( test no != "$CXX" && ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) || (test g++ != "$CXX"))); then AC_PROG_CXXCPP else _lt_caught_CXX_error=yes fi AC_LANG_PUSH(C++) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test yes != "$_lt_caught_CXX_error"; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} CFLAGS=$CXXFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately if test yes = "$GXX"; then _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' else _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= fi if test yes = "$GXX"; then # Set up default GNU C++ configuration LT_PATH_LD # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test yes = "$with_gnu_ld"; then _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='$wl' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) _LT_TAGVAR(ld_shlibs, $1)=yes case $host_os in aix3*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aix[[4-9]]*) if test ia64 = "$host_cpu"; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag= else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # have runtime linking enabled, and use it for executables. # For shared libraries, we enable/disable runtime linking # depending on the kind of the shared library created - # when "with_aix_soname,aix_use_runtimelinking" is: # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables # "aix,yes" lib.so shared, rtl:yes, for executables # lib.a static archive # "both,no" lib.so.V(shr.o) shared, rtl:yes # lib.a(lib.so.V) shared, rtl:no, for executables # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables # lib.a(lib.so.V) shared, rtl:no # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables # lib.a static archive case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then # With aix-soname=svr4, we create the lib.so.V shared archives only, # so we don't have lib.a shared libs to link our executables. # We have to force runtime linking in this case. aix_use_runtimelinking=yes LDFLAGS="$LDFLAGS -Wl,-brtl" fi ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='$wl-f,' case $with_aix_soname,$aix_use_runtimelinking in aix,*) ;; # no import file svr4,* | *,yes) # use import file # The Import File defines what to hardcode. _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no ;; esac if test yes = "$GXX"; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`$CC -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi esac shared_flag='-shared' if test yes = "$aix_use_runtimelinking"; then shared_flag=$shared_flag' $wl-G' fi # Need to ensure runtime linking is disabled for the traditional # shared library, or the linker may eventually find shared libraries # /with/ Import File - we do not want to mix them. shared_flag_aix='-shared' shared_flag_svr4='-shared $wl-G' else # not using gcc if test ia64 = "$host_cpu"; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test yes = "$aix_use_runtimelinking"; then shared_flag='$wl-G' else shared_flag='$wl-bM:SRE' fi shared_flag_aix='$wl-bM:SRE' shared_flag_svr4='$wl-G' fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. _LT_TAGVAR(always_export_symbols, $1)=yes if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. # The "-G" linker flag allows undefined symbols. _LT_TAGVAR(no_undefined_flag, $1)='-bernotok' # Determine the default libpath from the value encoded in an empty # executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag else if test ia64 = "$host_cpu"; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX([$1]) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok' if test yes = "$with_gnu_ld"; then # We only use this code for GNU lds that support --whole-archive. _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' fi _LT_TAGVAR(archive_cmds_need_lc, $1)=yes _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' # -brtl affects multiple linker settings, -berok does not and is overridden later compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`' if test svr4 != "$with_aix_soname"; then # This is similar to how AIX traditionally builds its shared # libraries. Need -bnortl late, we may have -brtl in LDFLAGS. _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' fi if test aix != "$with_aix_soname"; then _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' else # used by -dlpreopen to get the symbols _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir' fi _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d' fi fi ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; cygwin* | mingw* | pw32* | cegcc*) case $GXX,$cc_basename in ,cl* | no,cl*) # Native MSVC # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(file_list_spec, $1)='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then cp "$export_symbols" "$output_objdir/$soname.def"; echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; else $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes # Don't use ranlib _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile=$lt_outputfile.exe lt_tool_outputfile=$lt_tool_outputfile.exe ;; esac~ func_to_tool_file "$lt_outputfile"~ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # g++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file, use it as # is; otherwise, prepend EXPORTS... _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; os2*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=unsupported shrext_cmds=.dll _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ prefix_cmds="$SED"~ if test EXPORTS = "`$SED 1q $export_symbols`"; then prefix_cmds="$prefix_cmds -e 1d"; fi~ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; freebsd2.*) # C++ shared libraries reported to be fairly broken before # switch to ELF _LT_TAGVAR(ld_shlibs, $1)=no ;; freebsd-elf*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_TAGVAR(ld_shlibs, $1)=yes ;; haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes ;; hpux9*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test yes = "$GXX"; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; hpux10*|hpux11*) if test no = "$with_gnu_ld"; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) ;; *) _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test yes = "$GXX"; then if test no = "$with_gnu_ld"; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test yes = "$GXX"; then if test no = "$with_gnu_ld"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib' fi fi _LT_TAGVAR(link_all_deplibs, $1)=yes ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc* | ecpc* ) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; esac _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ $RANLIB $oldlib' _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 6 and above use weak symbols _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' ;; cxx*) # Compaq C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' ;; xl* | mpixl* | bgxl*) # IBM XL 8.0 on PPC, with GNU ld _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' if test yes = "$supports_anon_versioning"; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; m88k*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; *nto* | *qnx*) _LT_TAGVAR(ld_shlibs, $1)=yes ;; openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib' _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' fi output_verbose_link_cmd=func_echo_all else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # the KAI C++ compiler. case $host in osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; esac ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; cxx*) case $host in osf3*) _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' ;; *) _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~ $RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ;; esac _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test yes,no = "$GXX,$with_gnu_ld"; then _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' case $host in osf3*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; solaris*) case $cc_basename in CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands '-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes output_verbose_link_cmd='func_echo_all' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test yes,no = "$GXX,$with_gnu_ld"; then _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' else # g++ 2.7 appears to require '-G' NOT '-shared' on this # platform. _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir' case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We CANNOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ '"$_LT_TAGVAR(old_archive_cmds, $1)" _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ '"$_LT_TAGVAR(reload_cmds, $1)" ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no _LT_TAGVAR(GCC, $1)=$GXX _LT_TAGVAR(LD, $1)=$LD ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld fi # test yes != "$_lt_caught_CXX_error" AC_LANG_POP ])# _LT_LANG_CXX_CONFIG # _LT_FUNC_STRIPNAME_CNF # ---------------------- # func_stripname_cnf prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # # This function is identical to the (non-XSI) version of func_stripname, # except this one can be used by m4 code that may be executed by configure, # rather than the libtool script. m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl AC_REQUIRE([_LT_DECL_SED]) AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) func_stripname_cnf () { case @S|@2 in .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;; *) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;; esac } # func_stripname_cnf ])# _LT_FUNC_STRIPNAME_CNF # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) # --------------------------------- # Figure out "hidden" library dependencies from verbose # compiler output when linking a shared library. # Parse the compiler output and extract the necessary # objects, libraries and library flags. m4_defun([_LT_SYS_HIDDEN_LIBDEPS], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl # Dependencies to place before and after the object being linked: _LT_TAGVAR(predep_objects, $1)= _LT_TAGVAR(postdep_objects, $1)= _LT_TAGVAR(predeps, $1)= _LT_TAGVAR(postdeps, $1)= _LT_TAGVAR(compiler_lib_search_path, $1)= dnl we can't use the lt_simple_compile_test_code here, dnl because it contains code intended for an executable, dnl not a library. It's possible we should let each dnl tag define a new lt_????_link_test_code variable, dnl but it's only used here... m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF int a; void foo (void) { a = 0; } _LT_EOF ], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF class Foo { public: Foo (void) { a = 0; } private: int a; }; _LT_EOF ], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer*4 a a=0 return end _LT_EOF ], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer a a=0 return end _LT_EOF ], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF public class foo { private int a; public void bar (void) { a = 0; } }; _LT_EOF ], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF package foo func foo() { } _LT_EOF ]) _lt_libdeps_save_CFLAGS=$CFLAGS case "$CC $CFLAGS " in #( *\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; *\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; *\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; esac dnl Parse the compiler output and extract the necessary dnl objects, libraries and library flags. if AC_TRY_EVAL(ac_compile); then # Parse the compiler output and extract the necessary # objects, libraries and library flags. # Sentinel used to keep track of whether or not we are before # the conftest object file. pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do case $prev$p in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. if test x-L = "$p" || test x-R = "$p"; then prev=$p continue fi # Expand the sysroot to ease extracting the directories later. if test -z "$prev"; then case $p in -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; esac fi case $p in =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; esac if test no = "$pre_test_object_deps_done"; then case $prev in -L | -R) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p else _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p" fi ;; # The "-l" case would never come before the object being # linked, so don't bother handling this case. esac else if test -z "$_LT_TAGVAR(postdeps, $1)"; then _LT_TAGVAR(postdeps, $1)=$prev$p else _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p" fi fi prev= ;; *.lto.$objext) ;; # Ignore GCC LTO objects *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then pre_test_object_deps_done=yes continue fi if test no = "$pre_test_object_deps_done"; then if test -z "$_LT_TAGVAR(predep_objects, $1)"; then _LT_TAGVAR(predep_objects, $1)=$p else _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" fi else if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then _LT_TAGVAR(postdep_objects, $1)=$p else _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" fi fi ;; *) ;; # Ignore the rest. esac done # Clean up. rm -f a.out a.exe else echo "libtool.m4: error: problem compiling $1 test program" fi $RM -f confest.$objext CFLAGS=$_lt_libdeps_save_CFLAGS # PORTME: override above test on systems where it is broken m4_if([$1], [CXX], [case $host_os in interix[[3-9]]*) # Interix 3.5 installs completely hosed .la files for C++, so rather than # hack all around it, let's just trust "g++" to DTRT. _LT_TAGVAR(predep_objects,$1)= _LT_TAGVAR(postdep_objects,$1)= _LT_TAGVAR(postdeps,$1)= ;; esac ]) case " $_LT_TAGVAR(postdeps, $1) " in *" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; esac _LT_TAGVAR(compiler_lib_search_dirs, $1)= if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'` fi _LT_TAGDECL([], [compiler_lib_search_dirs], [1], [The directories searched by this compiler when creating a shared library]) _LT_TAGDECL([], [predep_objects], [1], [Dependencies to place before and after the objects being linked to create a shared library]) _LT_TAGDECL([], [postdep_objects], [1]) _LT_TAGDECL([], [predeps], [1]) _LT_TAGDECL([], [postdeps], [1]) _LT_TAGDECL([], [compiler_lib_search_path], [1], [The library search path used internally by the compiler when linking a shared library]) ])# _LT_SYS_HIDDEN_LIBDEPS # _LT_LANG_F77_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a Fortran 77 compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_F77_CONFIG], [AC_LANG_PUSH(Fortran 77) if test -z "$F77" || test no = "$F77"; then _lt_disable_F77=yes fi _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for f77 test sources. ac_ext=f # Object file extension for compiled f77 test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the F77 compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test yes != "$_lt_disable_F77"; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${F77-"f77"} CFLAGS=$FFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) GCC=$G77 if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test no = "$can_build_shared" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test yes = "$enable_shared" && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test ia64 != "$host_cpu"; then case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in yes,aix,yes) ;; # shared object as lib.so file only yes,svr4,*) ;; # shared object as lib.so archive member only yes,*) enable_static=no ;; # shared object in lib.a archive as well esac fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test yes = "$enable_shared" || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)=$G77 _LT_TAGVAR(LD, $1)=$LD ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS fi # test yes != "$_lt_disable_F77" AC_LANG_POP ])# _LT_LANG_F77_CONFIG # _LT_LANG_FC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for a Fortran compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_FC_CONFIG], [AC_LANG_PUSH(Fortran) if test -z "$FC" || test no = "$FC"; then _lt_disable_FC=yes fi _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for fc test sources. ac_ext=${ac_fc_srcext-f} # Object file extension for compiled fc test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the FC compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test yes != "$_lt_disable_FC"; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_GCC=$GCC lt_save_CFLAGS=$CFLAGS CC=${FC-"f95"} CFLAGS=$FCFLAGS compiler=$CC GCC=$ac_cv_fc_compiler_gnu _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test no = "$can_build_shared" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test yes = "$enable_shared" && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test ia64 != "$host_cpu"; then case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in yes,aix,yes) ;; # shared object as lib.so file only yes,svr4,*) ;; # shared object as lib.so archive member only yes,*) enable_static=no ;; # shared object in lib.a archive as well esac fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test yes = "$enable_shared" || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu _LT_TAGVAR(LD, $1)=$LD ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS fi # test yes != "$_lt_disable_FC" AC_LANG_POP ])# _LT_LANG_FC_CONFIG # _LT_LANG_GCJ_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for the GNU Java Compiler compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_GCJ_CONFIG], [AC_REQUIRE([LT_PROG_GCJ])dnl AC_LANG_SAVE # Source file extension for Java test sources. ac_ext=java # Object file extension for compiled Java test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="class foo {}" # Code to be used in simple link tests lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC=yes CC=${GCJ-"gcj"} CFLAGS=$GCJFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_TAGVAR(LD, $1)=$LD _LT_CC_BASENAME([$compiler]) # GCJ did not exist at the time GCC didn't implicitly link libc in. _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi AC_LANG_RESTORE GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_GCJ_CONFIG # _LT_LANG_GO_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for the GNU Go compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_GO_CONFIG], [AC_REQUIRE([LT_PROG_GO])dnl AC_LANG_SAVE # Source file extension for Go test sources. ac_ext=go # Object file extension for compiled Go test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="package main; func main() { }" # Code to be used in simple link tests lt_simple_link_test_code='package main; func main() { }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC=yes CC=${GOC-"gccgo"} CFLAGS=$GOFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_TAGVAR(LD, $1)=$LD _LT_CC_BASENAME([$compiler]) # Go did not exist at the time GCC didn't implicitly link libc in. _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(reload_flag, $1)=$reload_flag _LT_TAGVAR(reload_cmds, $1)=$reload_cmds ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi AC_LANG_RESTORE GCC=$lt_save_GCC CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_GO_CONFIG # _LT_LANG_RC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for the Windows resource compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to 'libtool'. m4_defun([_LT_LANG_RC_CONFIG], [AC_REQUIRE([LT_PROG_RC])dnl AC_LANG_SAVE # Source file extension for RC test sources. ac_ext=rc # Object file extension for compiled RC test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' # Code to be used in simple link tests lt_simple_link_test_code=$lt_simple_compile_test_code # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC= CC=${RC-"windres"} CFLAGS= compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes if test -n "$compiler"; then : _LT_CONFIG($1) fi GCC=$lt_save_GCC AC_LANG_RESTORE CC=$lt_save_CC CFLAGS=$lt_save_CFLAGS ])# _LT_LANG_RC_CONFIG # LT_PROG_GCJ # ----------- AC_DEFUN([LT_PROG_GCJ], [m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj,) test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS)])])[]dnl ]) # Old name: AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_GCJ], []) # LT_PROG_GO # ---------- AC_DEFUN([LT_PROG_GO], [AC_CHECK_TOOL(GOC, gccgo,) ]) # LT_PROG_RC # ---------- AC_DEFUN([LT_PROG_RC], [AC_CHECK_TOOL(RC, windres,) ]) # Old name: AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_RC], []) # _LT_DECL_EGREP # -------------- # If we don't have a new enough Autoconf to choose the best grep # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_EGREP], [AC_REQUIRE([AC_PROG_EGREP])dnl AC_REQUIRE([AC_PROG_FGREP])dnl test -z "$GREP" && GREP=grep _LT_DECL([], [GREP], [1], [A grep program that handles long lines]) _LT_DECL([], [EGREP], [1], [An ERE matcher]) _LT_DECL([], [FGREP], [1], [A literal string matcher]) dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too AC_SUBST([GREP]) ]) # _LT_DECL_OBJDUMP # -------------- # If we don't have a new enough Autoconf to choose the best objdump # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_OBJDUMP], [AC_CHECK_TOOL(OBJDUMP, objdump, false) test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) AC_SUBST([OBJDUMP]) ]) # _LT_DECL_DLLTOOL # ---------------- # Ensure DLLTOOL variable is set. m4_defun([_LT_DECL_DLLTOOL], [AC_CHECK_TOOL(DLLTOOL, dlltool, false) test -z "$DLLTOOL" && DLLTOOL=dlltool _LT_DECL([], [DLLTOOL], [1], [DLL creation program]) AC_SUBST([DLLTOOL]) ]) # _LT_DECL_SED # ------------ # Check for a fully-functional sed program, that truncates # as few characters as possible. Prefer GNU sed if found. m4_defun([_LT_DECL_SED], [AC_PROG_SED test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" _LT_DECL([], [SED], [1], [A sed program that does not truncate output]) _LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], [Sed that helps us avoid accidentally triggering echo(1) options like -n]) ])# _LT_DECL_SED m4_ifndef([AC_PROG_SED], [ ############################################################ # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_SED. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # ############################################################ m4_defun([AC_PROG_SED], [AC_MSG_CHECKING([for a sed that does not truncate output]) AC_CACHE_VAL(lt_cv_path_SED, [# Loop through the user's path and test for sed and gsed. # Then use that list of sed's as ones to test for truncation. as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for lt_ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" fi done done done IFS=$as_save_IFS lt_ac_max=0 lt_ac_count=0 # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do test ! -f "$lt_ac_sed" && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in # Check for GNU sed and select it if it is found. if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then lt_cv_path_SED=$lt_ac_sed break fi while true; do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo >>conftest.nl $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break cmp -s conftest.out conftest.nl || break # 10000 chars as input seems more than enough test 10 -lt "$lt_ac_count" && break lt_ac_count=`expr $lt_ac_count + 1` if test "$lt_ac_count" -gt "$lt_ac_max"; then lt_ac_max=$lt_ac_count lt_cv_path_SED=$lt_ac_sed fi done done ]) SED=$lt_cv_path_SED AC_SUBST([SED]) AC_MSG_RESULT([$SED]) ])#AC_PROG_SED ])#m4_ifndef # Old name: AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_SED], []) # _LT_CHECK_SHELL_FEATURES # ------------------------ # Find out whether the shell is Bourne or XSI compatible, # or has some other useful features. m4_defun([_LT_CHECK_SHELL_FEATURES], [if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi _LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac _LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl ])# _LT_CHECK_SHELL_FEATURES # _LT_PATH_CONVERSION_FUNCTIONS # ----------------------------- # Determine what file name conversion functions should be used by # func_to_host_file (and, implicitly, by func_to_host_path). These are needed # for certain cross-compile configurations and native mingw. m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_MSG_CHECKING([how to convert $build file names to $host format]) AC_CACHE_VAL(lt_cv_to_host_file_cmd, [case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ;; esac ;; *-*-cygwin* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_noop ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ;; esac ;; * ) # unhandled hosts (and "normal" native builds) lt_cv_to_host_file_cmd=func_convert_file_noop ;; esac ]) to_host_file_cmd=$lt_cv_to_host_file_cmd AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) _LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], [0], [convert $build file names to $host format])dnl AC_MSG_CHECKING([how to convert $build file names to toolchain format]) AC_CACHE_VAL(lt_cv_to_tool_file_cmd, [#assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac ;; esac ]) to_tool_file_cmd=$lt_cv_to_tool_file_cmd AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) _LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], [0], [convert $build files to toolchain format])dnl ])# _LT_PATH_CONVERSION_FUNCTIONS lightdm-gtk-greeter-2.0.5/m4/gettext.m40000644000175000017500000003676313243246347021653 0ustar00bluesabrebluesabre00000000000000# gettext.m4 serial 68 (gettext-0.19.8) dnl Copyright (C) 1995-2014, 2016 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl dnl This file can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: dnl Ulrich Drepper , 1995-2000. dnl Bruno Haible , 2000-2006, 2008-2010. dnl Macro to add for using GNU gettext. dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]). dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The dnl default (if it is not specified or empty) is 'no-libtool'. dnl INTLSYMBOL should be 'external' for packages with no intl directory, dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory. dnl If INTLSYMBOL is 'use-libtool', then a libtool library dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static, dnl depending on --{enable,disable}-{shared,static} and on the presence of dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library dnl $(top_builddir)/intl/libintl.a will be created. dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext dnl implementations (in libc or libintl) without the ngettext() function dnl will be ignored. If NEEDSYMBOL is specified and is dnl 'need-formatstring-macros', then GNU gettext implementations that don't dnl support the ISO C 99 formatstring macros will be ignored. dnl INTLDIR is used to find the intl libraries. If empty, dnl the value '$(top_builddir)/intl/' is used. dnl dnl The result of the configuration is one of three cases: dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled dnl and used. dnl Catalog format: GNU --> install in $(datadir) dnl Catalog extension: .mo after installation, .gmo in source tree dnl 2) GNU gettext has been found in the system's C library. dnl Catalog format: GNU --> install in $(datadir) dnl Catalog extension: .mo after installation, .gmo in source tree dnl 3) No internationalization, always use English msgid. dnl Catalog format: none dnl Catalog extension: none dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur. dnl The use of .gmo is historical (it was needed to avoid overwriting the dnl GNU format catalogs when building on a platform with an X/Open gettext), dnl but we keep it in order not to force irrelevant filename changes on the dnl maintainers. dnl AC_DEFUN([AM_GNU_GETTEXT], [ dnl Argument checking. ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], , [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT ])])])])]) ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old], [AC_DIAGNOSE([obsolete], [Use of AM_GNU_GETTEXT without [external] argument is deprecated.])]) ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], , [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT ])])])]) define([gt_included_intl], ifelse([$1], [external], ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]), [yes])) define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], [])) gt_NEEDS_INIT AM_GNU_GETTEXT_NEED([$2]) AC_REQUIRE([AM_PO_SUBDIRS])dnl ifelse(gt_included_intl, yes, [ AC_REQUIRE([AM_INTL_SUBDIR])dnl ]) dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) dnl Sometimes libintl requires libiconv, so first search for libiconv. dnl Ideally we would do this search only after the dnl if test "$USE_NLS" = "yes"; then dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT dnl the configure script would need to contain the same shell code dnl again, outside any 'if'. There are two solutions: dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'. dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE. dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not dnl documented, we avoid it. ifelse(gt_included_intl, yes, , [ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) ]) dnl Sometimes, on Mac OS X, libintl requires linking with CoreFoundation. gt_INTL_MACOSX dnl Set USE_NLS. AC_REQUIRE([AM_NLS]) ifelse(gt_included_intl, yes, [ BUILD_INCLUDED_LIBINTL=no USE_INCLUDED_LIBINTL=no ]) LIBINTL= LTLIBINTL= POSUB= dnl Add a version number to the cache macros. case " $gt_needs " in *" need-formatstring-macros "*) gt_api_version=3 ;; *" need-ngettext "*) gt_api_version=2 ;; *) gt_api_version=1 ;; esac gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" dnl If we use NLS figure out what method if test "$USE_NLS" = "yes"; then gt_use_preinstalled_gnugettext=no ifelse(gt_included_intl, yes, [ AC_MSG_CHECKING([whether included gettext is requested]) AC_ARG_WITH([included-gettext], [ --with-included-gettext use the GNU gettext library included here], nls_cv_force_use_gnu_gettext=$withval, nls_cv_force_use_gnu_gettext=no) AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext]) nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" if test "$nls_cv_force_use_gnu_gettext" != "yes"; then ]) dnl User does not insist on using GNU NLS library. Figure out what dnl to use. If GNU gettext is available we use this. Else we have dnl to fall back to GNU NLS library. if test $gt_api_version -ge 3; then gt_revision_test_code=' #ifndef __GNU_GETTEXT_SUPPORTED_REVISION #define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) #endif changequote(,)dnl typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; changequote([,])dnl ' else gt_revision_test_code= fi if test $gt_api_version -ge 2; then gt_expression_test_code=' + * ngettext ("", "", 0)' else gt_expression_test_code= fi AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc], [AC_LINK_IFELSE( [AC_LANG_PROGRAM( [[ #include #ifndef __GNU_GETTEXT_SUPPORTED_REVISION extern int _nl_msg_cat_cntr; extern int *_nl_domain_bindings; #define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_domain_bindings) #else #define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 #endif $gt_revision_test_code ]], [[ bindtextdomain ("", ""); return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION ]])], [eval "$gt_func_gnugettext_libc=yes"], [eval "$gt_func_gnugettext_libc=no"])]) if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then dnl Sometimes libintl requires libiconv, so first search for libiconv. ifelse(gt_included_intl, yes, , [ AM_ICONV_LINK ]) dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv]) dnl because that would add "-liconv" to LIBINTL and LTLIBINTL dnl even if libiconv doesn't exist. AC_LIB_LINKFLAGS_BODY([intl]) AC_CACHE_CHECK([for GNU gettext in libintl], [$gt_func_gnugettext_libintl], [gt_save_CPPFLAGS="$CPPFLAGS" CPPFLAGS="$CPPFLAGS $INCINTL" gt_save_LIBS="$LIBS" LIBS="$LIBS $LIBINTL" dnl Now see whether libintl exists and does not depend on libiconv. AC_LINK_IFELSE( [AC_LANG_PROGRAM( [[ #include #ifndef __GNU_GETTEXT_SUPPORTED_REVISION extern int _nl_msg_cat_cntr; extern #ifdef __cplusplus "C" #endif const char *_nl_expand_alias (const char *); #define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) #else #define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 #endif $gt_revision_test_code ]], [[ bindtextdomain ("", ""); return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION ]])], [eval "$gt_func_gnugettext_libintl=yes"], [eval "$gt_func_gnugettext_libintl=no"]) dnl Now see whether libintl exists and depends on libiconv. if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then LIBS="$LIBS $LIBICONV" AC_LINK_IFELSE( [AC_LANG_PROGRAM( [[ #include #ifndef __GNU_GETTEXT_SUPPORTED_REVISION extern int _nl_msg_cat_cntr; extern #ifdef __cplusplus "C" #endif const char *_nl_expand_alias (const char *); #define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) #else #define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 #endif $gt_revision_test_code ]], [[ bindtextdomain ("", ""); return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION ]])], [LIBINTL="$LIBINTL $LIBICONV" LTLIBINTL="$LTLIBINTL $LTLIBICONV" eval "$gt_func_gnugettext_libintl=yes" ]) fi CPPFLAGS="$gt_save_CPPFLAGS" LIBS="$gt_save_LIBS"]) fi dnl If an already present or preinstalled GNU gettext() is found, dnl use it. But if this macro is used in GNU gettext, and GNU dnl gettext is already preinstalled in libintl, we update this dnl libintl. (Cf. the install rule in intl/Makefile.in.) if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ && test "$PACKAGE" != gettext-runtime \ && test "$PACKAGE" != gettext-tools; }; then gt_use_preinstalled_gnugettext=yes else dnl Reset the values set by searching for libintl. LIBINTL= LTLIBINTL= INCINTL= fi ifelse(gt_included_intl, yes, [ if test "$gt_use_preinstalled_gnugettext" != "yes"; then dnl GNU gettext is not found in the C library. dnl Fall back on included GNU gettext library. nls_cv_use_gnu_gettext=yes fi fi if test "$nls_cv_use_gnu_gettext" = "yes"; then dnl Mark actions used to generate GNU NLS library. BUILD_INCLUDED_LIBINTL=yes USE_INCLUDED_LIBINTL=yes LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD" LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD" LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` fi CATOBJEXT= if test "$gt_use_preinstalled_gnugettext" = "yes" \ || test "$nls_cv_use_gnu_gettext" = "yes"; then dnl Mark actions to use GNU gettext tools. CATOBJEXT=.gmo fi ]) if test -n "$INTL_MACOSX_LIBS"; then if test "$gt_use_preinstalled_gnugettext" = "yes" \ || test "$nls_cv_use_gnu_gettext" = "yes"; then dnl Some extra flags are needed during linking. LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" fi fi if test "$gt_use_preinstalled_gnugettext" = "yes" \ || test "$nls_cv_use_gnu_gettext" = "yes"; then AC_DEFINE([ENABLE_NLS], [1], [Define to 1 if translation of program messages to the user's native language is requested.]) else USE_NLS=no fi fi AC_MSG_CHECKING([whether to use NLS]) AC_MSG_RESULT([$USE_NLS]) if test "$USE_NLS" = "yes"; then AC_MSG_CHECKING([where the gettext function comes from]) if test "$gt_use_preinstalled_gnugettext" = "yes"; then if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then gt_source="external libintl" else gt_source="libc" fi else gt_source="included intl directory" fi AC_MSG_RESULT([$gt_source]) fi if test "$USE_NLS" = "yes"; then if test "$gt_use_preinstalled_gnugettext" = "yes"; then if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then AC_MSG_CHECKING([how to link with libintl]) AC_MSG_RESULT([$LIBINTL]) AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL]) fi dnl For backward compatibility. Some packages may be using this. AC_DEFINE([HAVE_GETTEXT], [1], [Define if the GNU gettext() function is already present or preinstalled.]) AC_DEFINE([HAVE_DCGETTEXT], [1], [Define if the GNU dcgettext() function is already present or preinstalled.]) fi dnl We need to process the po/ directory. POSUB=po fi ifelse(gt_included_intl, yes, [ dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL dnl to 'yes' because some of the testsuite requires it. if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then BUILD_INCLUDED_LIBINTL=yes fi dnl Make all variables we use known to autoconf. AC_SUBST([BUILD_INCLUDED_LIBINTL]) AC_SUBST([USE_INCLUDED_LIBINTL]) AC_SUBST([CATOBJEXT]) dnl For backward compatibility. Some configure.ins may be using this. nls_cv_header_intl= nls_cv_header_libgt= dnl For backward compatibility. Some Makefiles may be using this. DATADIRNAME=share AC_SUBST([DATADIRNAME]) dnl For backward compatibility. Some Makefiles may be using this. INSTOBJEXT=.mo AC_SUBST([INSTOBJEXT]) dnl For backward compatibility. Some Makefiles may be using this. GENCAT=gencat AC_SUBST([GENCAT]) dnl For backward compatibility. Some Makefiles may be using this. INTLOBJS= if test "$USE_INCLUDED_LIBINTL" = yes; then INTLOBJS="\$(GETTOBJS)" fi AC_SUBST([INTLOBJS]) dnl Enable libtool support if the surrounding package wishes it. INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix AC_SUBST([INTL_LIBTOOL_SUFFIX_PREFIX]) ]) dnl For backward compatibility. Some Makefiles may be using this. INTLLIBS="$LIBINTL" AC_SUBST([INTLLIBS]) dnl Make all documented variables known to autoconf. AC_SUBST([LIBINTL]) AC_SUBST([LTLIBINTL]) AC_SUBST([POSUB]) ]) dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized. m4_define([gt_NEEDS_INIT], [ m4_divert_text([DEFAULTS], [gt_needs=]) m4_define([gt_NEEDS_INIT], []) ]) dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL]) AC_DEFUN([AM_GNU_GETTEXT_NEED], [ m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"]) ]) dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version]) AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) dnl Usage: AM_GNU_GETTEXT_REQUIRE_VERSION([gettext-version]) AC_DEFUN([AM_GNU_GETTEXT_REQUIRE_VERSION], []) lightdm-gtk-greeter-2.0.5/m4/progtest.m40000644000175000017500000000602413243246347022021 0ustar00bluesabrebluesabre00000000000000# progtest.m4 serial 7 (gettext-0.18.2) dnl Copyright (C) 1996-2003, 2005, 2008-2016 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl dnl This file can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: dnl Ulrich Drepper , 1996. AC_PREREQ([2.50]) # Search path for a program which passes the given test. dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) AC_DEFUN([AM_PATH_PROG_WITH_TEST], [ # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which # contains only /bin. Note that ksh looks also at the FPATH variable, # so we have to set that as well for the test. PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ || PATH_SEPARATOR=';' } fi # Find out how to test for executable files. Don't use a zero-byte file, # as systems may use methods other than mode bits to determine executability. cat >conf$$.file <<_ASEOF #! /bin/sh exit 0 _ASEOF chmod +x conf$$.file if test -x conf$$.file >/dev/null 2>&1; then ac_executable_p="test -x" else ac_executable_p="test -f" fi rm -f conf$$.file # Extract the first word of "$2", so it can be a program name with args. set dummy $2; ac_word=[$]2 AC_MSG_CHECKING([for $ac_word]) AC_CACHE_VAL([ac_cv_path_$1], [case "[$]$1" in [[\\/]]* | ?:[[\\/]]*) ac_cv_path_$1="[$]$1" # Let the user override the test with a path. ;; *) ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in ifelse([$5], , $PATH, [$5]); do IFS="$ac_save_IFS" test -z "$ac_dir" && ac_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD if [$3]; then ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext" break 2 fi fi done done IFS="$ac_save_IFS" dnl If no 4th arg is given, leave the cache variable unset, dnl so AC_PATH_PROGS will keep looking. ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" ])dnl ;; esac])dnl $1="$ac_cv_path_$1" if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then AC_MSG_RESULT([$][$1]) else AC_MSG_RESULT([no]) fi AC_SUBST([$1])dnl ]) lightdm-gtk-greeter-2.0.5/m4/intlmacosx.m40000644000175000017500000000474513243246347022343 0ustar00bluesabrebluesabre00000000000000# intlmacosx.m4 serial 5 (gettext-0.18.2) dnl Copyright (C) 2004-2014, 2016 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl dnl This file can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Checks for special options needed on Mac OS X. dnl Defines INTL_MACOSX_LIBS. AC_DEFUN([gt_INTL_MACOSX], [ dnl Check for API introduced in Mac OS X 10.2. AC_CACHE_CHECK([for CFPreferencesCopyAppValue], [gt_cv_func_CFPreferencesCopyAppValue], [gt_save_LIBS="$LIBS" LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" AC_LINK_IFELSE( [AC_LANG_PROGRAM( [[#include ]], [[CFPreferencesCopyAppValue(NULL, NULL)]])], [gt_cv_func_CFPreferencesCopyAppValue=yes], [gt_cv_func_CFPreferencesCopyAppValue=no]) LIBS="$gt_save_LIBS"]) if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1], [Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in the CoreFoundation framework.]) fi dnl Check for API introduced in Mac OS X 10.3. AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent], [gt_save_LIBS="$LIBS" LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" AC_LINK_IFELSE( [AC_LANG_PROGRAM( [[#include ]], [[CFLocaleCopyCurrent();]])], [gt_cv_func_CFLocaleCopyCurrent=yes], [gt_cv_func_CFLocaleCopyCurrent=no]) LIBS="$gt_save_LIBS"]) if test $gt_cv_func_CFLocaleCopyCurrent = yes; then AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1], [Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the CoreFoundation framework.]) fi INTL_MACOSX_LIBS= if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" fi AC_SUBST([INTL_MACOSX_LIBS]) ]) lightdm-gtk-greeter-2.0.5/m4/lib-prefix.m40000644000175000017500000002042213243246347022211 0ustar00bluesabrebluesabre00000000000000# lib-prefix.m4 serial 7 (gettext-0.18) dnl Copyright (C) 2001-2005, 2008-2016 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl From Bruno Haible. dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't dnl require excessive bracketing. ifdef([AC_HELP_STRING], [AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], [AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed dnl to access previously installed libraries. The basic assumption is that dnl a user will want packages to use other packages he previously installed dnl with the same --prefix option. dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate dnl libraries, but is otherwise very convenient. AC_DEFUN([AC_LIB_PREFIX], [ AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) AC_REQUIRE([AC_PROG_CC]) AC_REQUIRE([AC_CANONICAL_HOST]) AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) dnl By default, look in $includedir and $libdir. use_additional=yes AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) AC_LIB_ARG_WITH([lib-prefix], [ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib --without-lib-prefix don't search for libraries in includedir and libdir], [ if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) else additional_includedir="$withval/include" additional_libdir="$withval/$acl_libdirstem" fi fi ]) if test $use_additional = yes; then dnl Potentially add $additional_includedir to $CPPFLAGS. dnl But don't add it dnl 1. if it's the standard /usr/include, dnl 2. if it's already present in $CPPFLAGS, dnl 3. if it's /usr/local/include and we are using GCC on Linux, dnl 4. if it doesn't exist as a directory. if test "X$additional_includedir" != "X/usr/include"; then haveit= for x in $CPPFLAGS; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then if test -d "$additional_includedir"; then dnl Really add $additional_includedir to $CPPFLAGS. CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" fi fi fi fi dnl Potentially add $additional_libdir to $LDFLAGS. dnl But don't add it dnl 1. if it's the standard /usr/lib, dnl 2. if it's already present in $LDFLAGS, dnl 3. if it's /usr/local/lib and we are using GCC on Linux, dnl 4. if it doesn't exist as a directory. if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then haveit= for x in $LDFLAGS; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; esac fi fi if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LDFLAGS. LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" fi fi fi fi fi ]) dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, dnl acl_final_exec_prefix, containing the values to which $prefix and dnl $exec_prefix will expand at the end of the configure script. AC_DEFUN([AC_LIB_PREPARE_PREFIX], [ dnl Unfortunately, prefix and exec_prefix get only finally determined dnl at the end of configure. if test "X$prefix" = "XNONE"; then acl_final_prefix="$ac_default_prefix" else acl_final_prefix="$prefix" fi if test "X$exec_prefix" = "XNONE"; then acl_final_exec_prefix='${prefix}' else acl_final_exec_prefix="$exec_prefix" fi acl_save_prefix="$prefix" prefix="$acl_final_prefix" eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" prefix="$acl_save_prefix" ]) dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the dnl variables prefix and exec_prefix bound to the values they will have dnl at the end of the configure script. AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], [ acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" $1 exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" ]) dnl AC_LIB_PREPARE_MULTILIB creates dnl - a variable acl_libdirstem, containing the basename of the libdir, either dnl "lib" or "lib64" or "lib/64", dnl - a variable acl_libdirstem2, as a secondary possible value for dnl acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or dnl "lib/amd64". AC_DEFUN([AC_LIB_PREPARE_MULTILIB], [ dnl There is no formal standard regarding lib and lib64. dnl On glibc systems, the current practice is that on a system supporting dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine dnl the compiler's default mode by looking at the compiler's library search dnl path. If at least one of its elements ends in /lib64 or points to a dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI. dnl Otherwise we use the default, namely "lib". dnl On Solaris systems, the current practice is that on a system supporting dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib. AC_REQUIRE([AC_CANONICAL_HOST]) acl_libdirstem=lib acl_libdirstem2= case "$host_os" in solaris*) dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment dnl . dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link." dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the dnl symlink is missing, so we set acl_libdirstem2 too. AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit], [AC_EGREP_CPP([sixtyfour bits], [ #ifdef _LP64 sixtyfour bits #endif ], [gl_cv_solaris_64bit=yes], [gl_cv_solaris_64bit=no]) ]) if test $gl_cv_solaris_64bit = yes; then acl_libdirstem=lib/64 case "$host_cpu" in sparc*) acl_libdirstem2=lib/sparcv9 ;; i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; esac fi ;; *) searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` if test -n "$searchpath"; then acl_save_IFS="${IFS= }"; IFS=":" for searchdir in $searchpath; do if test -d "$searchdir"; then case "$searchdir" in */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; */../ | */.. ) # Better ignore directories of this form. They are misleading. ;; *) searchdir=`cd "$searchdir" && pwd` case "$searchdir" in */lib64 ) acl_libdirstem=lib64 ;; esac ;; esac fi done IFS="$acl_save_IFS" fi ;; esac test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" ]) lightdm-gtk-greeter-2.0.5/m4/nls.m40000644000175000017500000000230713243246347020746 0ustar00bluesabrebluesabre00000000000000# nls.m4 serial 5 (gettext-0.18) dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014, 2016 Free Software dnl Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl dnl This file can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: dnl Ulrich Drepper , 1995-2000. dnl Bruno Haible , 2000-2003. AC_PREREQ([2.50]) AC_DEFUN([AM_NLS], [ AC_MSG_CHECKING([whether NLS is requested]) dnl Default is enabled NLS AC_ARG_ENABLE([nls], [ --disable-nls do not use Native Language Support], USE_NLS=$enableval, USE_NLS=yes) AC_MSG_RESULT([$USE_NLS]) AC_SUBST([USE_NLS]) ]) lightdm-gtk-greeter-2.0.5/m4/iconv.m40000644000175000017500000002207213243246347021271 0ustar00bluesabrebluesabre00000000000000# iconv.m4 serial 19 (gettext-0.18.2) dnl Copyright (C) 2000-2002, 2007-2014, 2016 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl From Bruno Haible. AC_DEFUN([AM_ICONV_LINKFLAGS_BODY], [ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV dnl accordingly. AC_LIB_LINKFLAGS_BODY([iconv]) ]) AC_DEFUN([AM_ICONV_LINK], [ dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and dnl those with the standalone portable GNU libiconv installed). AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV dnl accordingly. AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) dnl Add $INCICONV to CPPFLAGS before performing the following checks, dnl because if the user has installed libiconv and not disabled its use dnl via --without-libiconv-prefix, he wants to use it. The first dnl AC_LINK_IFELSE will then fail, the second AC_LINK_IFELSE will succeed. am_save_CPPFLAGS="$CPPFLAGS" AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV]) AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [ am_cv_func_iconv="no, consider installing GNU libiconv" am_cv_lib_iconv=no AC_LINK_IFELSE( [AC_LANG_PROGRAM( [[ #include #include ]], [[iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd);]])], [am_cv_func_iconv=yes]) if test "$am_cv_func_iconv" != yes; then am_save_LIBS="$LIBS" LIBS="$LIBS $LIBICONV" AC_LINK_IFELSE( [AC_LANG_PROGRAM( [[ #include #include ]], [[iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd);]])], [am_cv_lib_iconv=yes] [am_cv_func_iconv=yes]) LIBS="$am_save_LIBS" fi ]) if test "$am_cv_func_iconv" = yes; then AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [ dnl This tests against bugs in AIX 5.1, AIX 6.1..7.1, HP-UX 11.11, dnl Solaris 10. am_save_LIBS="$LIBS" if test $am_cv_lib_iconv = yes; then LIBS="$LIBS $LIBICONV" fi am_cv_func_iconv_works=no for ac_iconv_const in '' 'const'; do AC_RUN_IFELSE( [AC_LANG_PROGRAM( [[ #include #include #ifndef ICONV_CONST # define ICONV_CONST $ac_iconv_const #endif ]], [[int result = 0; /* Test against AIX 5.1 bug: Failures are not distinguishable from successful returns. */ { iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); if (cd_utf8_to_88591 != (iconv_t)(-1)) { static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */ char buf[10]; ICONV_CONST char *inptr = input; size_t inbytesleft = strlen (input); char *outptr = buf; size_t outbytesleft = sizeof (buf); size_t res = iconv (cd_utf8_to_88591, &inptr, &inbytesleft, &outptr, &outbytesleft); if (res == 0) result |= 1; iconv_close (cd_utf8_to_88591); } } /* Test against Solaris 10 bug: Failures are not distinguishable from successful returns. */ { iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); if (cd_ascii_to_88591 != (iconv_t)(-1)) { static ICONV_CONST char input[] = "\263"; char buf[10]; ICONV_CONST char *inptr = input; size_t inbytesleft = strlen (input); char *outptr = buf; size_t outbytesleft = sizeof (buf); size_t res = iconv (cd_ascii_to_88591, &inptr, &inbytesleft, &outptr, &outbytesleft); if (res == 0) result |= 2; iconv_close (cd_ascii_to_88591); } } /* Test against AIX 6.1..7.1 bug: Buffer overrun. */ { iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1"); if (cd_88591_to_utf8 != (iconv_t)(-1)) { static ICONV_CONST char input[] = "\304"; static char buf[2] = { (char)0xDE, (char)0xAD }; ICONV_CONST char *inptr = input; size_t inbytesleft = 1; char *outptr = buf; size_t outbytesleft = 1; size_t res = iconv (cd_88591_to_utf8, &inptr, &inbytesleft, &outptr, &outbytesleft); if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD) result |= 4; iconv_close (cd_88591_to_utf8); } } #if 0 /* This bug could be worked around by the caller. */ /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ { iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); if (cd_88591_to_utf8 != (iconv_t)(-1)) { static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; char buf[50]; ICONV_CONST char *inptr = input; size_t inbytesleft = strlen (input); char *outptr = buf; size_t outbytesleft = sizeof (buf); size_t res = iconv (cd_88591_to_utf8, &inptr, &inbytesleft, &outptr, &outbytesleft); if ((int)res > 0) result |= 8; iconv_close (cd_88591_to_utf8); } } #endif /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is provided. */ if (/* Try standardized names. */ iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) /* Try IRIX, OSF/1 names. */ && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) /* Try AIX names. */ && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) /* Try HP-UX names. */ && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) result |= 16; return result; ]])], [am_cv_func_iconv_works=yes], , [case "$host_os" in aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; *) am_cv_func_iconv_works="guessing yes" ;; esac]) test "$am_cv_func_iconv_works" = no || break done LIBS="$am_save_LIBS" ]) case "$am_cv_func_iconv_works" in *no) am_func_iconv=no am_cv_lib_iconv=no ;; *) am_func_iconv=yes ;; esac else am_func_iconv=no am_cv_lib_iconv=no fi if test "$am_func_iconv" = yes; then AC_DEFINE([HAVE_ICONV], [1], [Define if you have the iconv() function and it works.]) fi if test "$am_cv_lib_iconv" = yes; then AC_MSG_CHECKING([how to link with libiconv]) AC_MSG_RESULT([$LIBICONV]) else dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV dnl either. CPPFLAGS="$am_save_CPPFLAGS" LIBICONV= LTLIBICONV= fi AC_SUBST([LIBICONV]) AC_SUBST([LTLIBICONV]) ]) dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to dnl avoid warnings like dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required". dnl This is tricky because of the way 'aclocal' is implemented: dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN. dnl Otherwise aclocal's initial scan pass would miss the macro definition. dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions. dnl Otherwise aclocal would emit many "Use of uninitialized value $1" dnl warnings. m4_define([gl_iconv_AC_DEFUN], m4_version_prereq([2.64], [[AC_DEFUN_ONCE( [$1], [$2])]], [m4_ifdef([gl_00GNULIB], [[AC_DEFUN_ONCE( [$1], [$2])]], [[AC_DEFUN( [$1], [$2])]])])) gl_iconv_AC_DEFUN([AM_ICONV], [ AM_ICONV_LINK if test "$am_cv_func_iconv" = yes; then AC_MSG_CHECKING([for iconv declaration]) AC_CACHE_VAL([am_cv_proto_iconv], [ AC_COMPILE_IFELSE( [AC_LANG_PROGRAM( [[ #include #include extern #ifdef __cplusplus "C" #endif #if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus) size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); #else size_t iconv(); #endif ]], [[]])], [am_cv_proto_iconv_arg1=""], [am_cv_proto_iconv_arg1="const"]) am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` AC_MSG_RESULT([ $am_cv_proto_iconv]) AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1], [Define as const if the declaration of iconv() needs const.]) dnl Also substitute ICONV_CONST in the gnulib generated . m4_ifdef([gl_ICONV_H_DEFAULTS], [AC_REQUIRE([gl_ICONV_H_DEFAULTS]) if test -n "$am_cv_proto_iconv_arg1"; then ICONV_CONST="const" fi ]) fi ]) lightdm-gtk-greeter-2.0.5/src/0000775000175000017500000000000013253545066020160 5ustar00bluesabrebluesabre00000000000000lightdm-gtk-greeter-2.0.5/src/greeterbackground.h0000664000175000017500000000641113252332650024020 0ustar00bluesabrebluesabre00000000000000/* * Copyright (C) 2014 - 2015, Sean Davis * Copyright (C) 2014, Andrew P. * Copyright (C) 2015, Simon Steinbeiß * * This program is free software: you can redistribute it and/or modify it under * the terms of the GNU General Public License as published by the Free Software * Foundation, either version 3 of the License, or (at your option) any later * version. See http://www.gnu.org/copyleft/gpl.html the full text of the * license. */ #ifndef GREETER_BACKGROUND_H #define GREETER_BACKGROUND_H #include #include G_BEGIN_DECLS #define GREETER_BACKGROUND_TYPE (greeter_background_get_type()) #define GREETER_BACKGROUND(obj) (G_TYPE_CHECK_INSTANCE_CAST((obj), GREETER_BACKGROUND_TYPE, GreeterBackground)) #define GREETER_BACKGROUND_CLASS(klass) (G_TYPE_CHECK_CLASS_CAST((klass), GREETER_BACKGROUND_TYPE, GreeterBackgroundClass)) #define GREETER_IS_BACKGROUND(obj) (G_TYPE_CHECK_INSTANCE_TYPE((obj), GREETER_BACKGROUND_TYPE)) #define GREETER_IS_BACKGROUND_CLASS(klass) (G_TYPE_CHECK_CLASS_TYPE((klass), GREETER_BACKGROUND_TYPE)) #define GREETER_BACKGROUND_DEFAULT "*" typedef enum { TRANSITION_TYPE_NONE, TRANSITION_TYPE_EASE_IN_OUT, TRANSITION_TYPE_LINEAR, TRANSITION_TYPE_FALLBACK } TransitionType; typedef enum { TRANSITION_EFFECT_NONE, } TransitionEffect; typedef struct _GreeterBackground GreeterBackground; typedef struct _GreeterBackgroundClass GreeterBackgroundClass; GType greeter_background_get_type(void) G_GNUC_CONST; GreeterBackground* greeter_background_new (GtkWidget* child); void greeter_background_set_active_monitor_config (GreeterBackground* background, const gchar* value); void greeter_background_set_monitor_config (GreeterBackground* background, const gchar* name, const gchar* bg, gint user_bg, gint laptop, gint transition_duration, TransitionType transition_type); void greeter_background_remove_monitor_config (GreeterBackground* background, const gchar* name); gchar** greeter_background_get_configured_monitors (GreeterBackground* background); void greeter_background_connect (GreeterBackground* background, GdkScreen* screen); void greeter_background_set_custom_background (GreeterBackground* background, const gchar* path); void greeter_background_save_xroot (GreeterBackground* background); const GdkRectangle* greeter_background_get_active_monitor_geometry(GreeterBackground* background); void greeter_background_add_accel_group (GreeterBackground* background, GtkAccelGroup* group); G_END_DECLS #endif // GREETER_BACKGROUND_H lightdm-gtk-greeter-2.0.5/src/Makefile.am0000664000175000017500000000517513252332454022216 0ustar00bluesabrebluesabre00000000000000# # Copyright (C) 2010 - 2011, Robert Ancell # Copyright (C) 2012 - 2013, Lionel Le Folgoc # Copyright (C) 2013 - 2018, Sean Davis # Copyright (C) 2014, Andrew P. # Copyright (C) 2015, Simon Steinbeiß # # This program is free software: you can redistribute it and/or modify it under # the terms of the GNU General Public License as published by the Free Software # Foundation, either version 3 of the License, or (at your option) any later # version. See http://www.gnu.org/copyleft/gpl.html the full text of the # license. # sbin_PROGRAMS = lightdm-gtk-greeter lightdm_gtk_greeter_built_sources = \ lightdm-gtk-greeter-ui.h \ lightdm-gtk-greeter-css-fallback.h \ lightdm-gtk-greeter-css-application.h lightdm_gtk_greeter_SOURCES = \ $(lightdm_gtk_greeter_built_sources) \ lightdm-gtk-greeter.c \ greeterbackground.c \ greeterbackground.h \ greeterconfiguration.c \ greeterconfiguration.h \ greetermenubar.c \ greetermenubar.h \ greeterdeprecated.c \ greeterdeprecated.h AM_CPPFLAGS = \ -I$(top_srcdir) \ -DHAVE_CONFIG_H \ -DGETTEXT_PACKAGE=\"$(GETTEXT_PACKAGE)\" \ -DLOCALEDIR=\""$(localedir)"\" \ -DGREETER_DATA_DIR=\""$(datadir)/lightdm-gtk-greeter"\" \ -DCONFIG_FILE=\""$(sysconfdir)/lightdm/lightdm-gtk-greeter.conf"\" \ -DINDICATOR_DIR=\""$(INDICATORDIR)"\" \ -DUNITY_INDICATOR_DIR=\""$(UNITY_INDICATORDIR)"\" \ $(WARN_CFLAGS) lightdm_gtk_greeter_CFLAGS = \ $(GTK_CFLAGS) \ $(GMODULE_CFLAGS) \ $(GTHREAD_CFLAGS) \ $(LIGHTDMGOBJECT_CFLAGS) \ $(LIBX11_CFLAGS) \ $(LIBINDICATOR_CFLAGS) \ $(LIBIDO_CFLAGS) lightdm_gtk_greeter_LDADD = \ $(GTK_LIBS) \ $(GMODULE_LIBS) \ $(GTHREAD_LIBS) \ $(LIGHTDMGOBJECT_LIBS) \ $(LIBX11_LIBS) \ $(LIBINDICATOR_LIBS) \ $(LIBIDO_LIBS) \ $(LIBXKLAVIER_LIBS)\ -lm if MAINTAINER_MODE lightdm-gtk-greeter-ui.h: $(srcdir)/lightdm-gtk-greeter.glade Makefile $(AM_V_GEN) exo-csource --static --strip-comments --strip-content --name=lightdm_gtk_greeter_ui $< >$@ lightdm-gtk-greeter-css-fallback.h: $(srcdir)/lightdm-gtk-greeter-fallback.css Makefile $(AM_V_GEN) exo-csource --static --name=lightdm_gtk_greeter_css_fallback $< >$@ lightdm-gtk-greeter-css-application.h: $(srcdir)/lightdm-gtk-greeter-application.css Makefile $(AM_V_GEN) exo-csource --static --name=lightdm_gtk_greeter_css_application $< >$@ DISTCLEANFILES = \ $(lightdm_gtk_greeter_built_sources) BUILT_SOURCES = \ $(lightdm_gtk_greeter_built_sources) endif EXTRA_DIST = \ lightdm-gtk-greeter.glade \ lightdm-gtk-greeter-fallback.css \ lightdm-gtk-greeter-application.css -include $(top_srcdir)/git.mk lightdm-gtk-greeter-2.0.5/src/greeterconfiguration.c0000664000175000017500000002615013252332676024555 0ustar00bluesabrebluesabre00000000000000/* * Copyright (C) 2015 - 2017, Sean Davis * * This program is free software: you can redistribute it and/or modify it under * the terms of the GNU General Public License as published by the Free Software * Foundation, either version 3 of the License, or (at your option) any later * version. See http://www.gnu.org/copyleft/gpl.html the full text of the * license. */ #include #include "greeterconfiguration.h" static GKeyFile* greeter_config = NULL; static GKeyFile* state_config = NULL; static gchar* state_filename = NULL; static GKeyFile* get_file_for_group (const gchar** group); static void save_key_file (GKeyFile* config, const gchar* path); static gboolean get_int (GKeyFile* config, const gchar* group, const gchar* key, gint* out); static gboolean get_bool (GKeyFile* config, const gchar* group, const gchar* key, gboolean* out); /* Implementation */ static GList* append_directory_content(GList* files, const gchar* path) { GError *error = NULL; GList *content = NULL; GList *list_iter = NULL; gchar *full_path = g_build_filename(path, "lightdm", "lightdm-gtk-greeter.conf.d", NULL); GDir *dir = g_dir_open(full_path, 0, &error); if(error && !g_error_matches(error, G_FILE_ERROR, G_FILE_ERROR_NOENT)) g_warning("[Configuration] Failed to read configuration directory '%s': %s", full_path, error->message); g_clear_error(&error); if(dir) { const gchar *name; while((name = g_dir_read_name(dir))) { if(!g_str_has_suffix(name, ".conf")) continue; content = g_list_prepend(content, g_build_filename(full_path, name, NULL)); } g_dir_close(dir); if(content) content = g_list_sort(content, (GCompareFunc)g_strcmp0); } content = g_list_append(content, g_build_filename(path, "lightdm", "lightdm-gtk-greeter.conf", NULL)); for(list_iter = content; list_iter; list_iter = g_list_next(list_iter)) { if(g_file_test(list_iter->data, G_FILE_TEST_IS_REGULAR)) files = g_list_prepend(files, list_iter->data); else g_free(list_iter->data); } g_list_free(content); g_free(full_path); return files; } void config_init(void) { GKeyFile *tmp_config = NULL; GError *error = NULL; GList *files = NULL; GList *file_iter = NULL; const gchar* const *dirs; gchar *state_config_dir; gchar *config_path_tmp; gchar *config_path; gint i; state_config_dir = g_build_filename(g_get_user_cache_dir(), "lightdm-gtk-greeter", NULL); state_filename = g_build_filename(state_config_dir, "state", NULL); g_mkdir_with_parents(state_config_dir, 0775); g_free(state_config_dir); state_config = g_key_file_new(); g_key_file_load_from_file(state_config, state_filename, G_KEY_FILE_NONE, &error); if (error && !g_error_matches(error, G_FILE_ERROR, G_FILE_ERROR_NOENT)) g_warning("[Configuration] Failed to load state from %s: %s", state_filename, error->message); g_clear_error(&error); dirs = g_get_system_data_dirs(); for(i = 0; dirs[i]; ++i) files = append_directory_content(files, dirs[i]); dirs = g_get_system_config_dirs(); for(i = 0; dirs[i]; ++i) files = append_directory_content(files, dirs[i]); config_path_tmp = g_path_get_dirname(CONFIG_FILE); config_path = g_path_get_dirname(config_path_tmp); files = append_directory_content(files, config_path); g_free(config_path_tmp); g_free(config_path); files = g_list_reverse(files); for(file_iter = files; file_iter; file_iter = g_list_next(file_iter)) { const gchar *path = file_iter->data; gchar **group_iter = NULL; gchar **groups; if(!tmp_config) tmp_config = g_key_file_new(); if(!g_key_file_load_from_file(tmp_config, path, G_KEY_FILE_NONE, &error)) { if(error) { g_warning("[Configuration] Failed to read file '%s': %s", path, error->message); g_clear_error(&error); } else g_warning("[Configuration] Failed to read file '%s'", path); continue; } g_message("[Configuration] Reading file: %s", path); if(!greeter_config) { greeter_config = tmp_config; tmp_config = NULL; continue; } groups = g_key_file_get_groups(tmp_config, NULL); for(group_iter = groups; *group_iter; ++group_iter) { gchar **key_iter = NULL; gchar **keys = NULL; if(**group_iter == '-') { g_key_file_remove_group(greeter_config, *group_iter + 1, NULL); continue; } keys = g_key_file_get_keys(tmp_config, *group_iter, NULL, NULL); for(key_iter = keys; *key_iter; ++key_iter) { gchar *value = NULL; if(**key_iter == '-') { g_key_file_remove_key(greeter_config, *group_iter, *key_iter + 1, NULL); continue; } value = g_key_file_get_value(tmp_config, *group_iter, *key_iter, NULL); if(value) { g_key_file_set_value(greeter_config, *group_iter, *key_iter, value); g_free(value); } } g_strfreev(keys); } g_strfreev(groups); } if (tmp_config) g_key_file_unref(tmp_config); g_list_free_full(files, g_free); if(!greeter_config) greeter_config = g_key_file_new(); } static GKeyFile* get_file_for_group(const gchar** group) { if(!*group) *group = CONFIG_GROUP_DEFAULT; if(*group[0] == '/') { (*group)++; return state_config; } return greeter_config; } static void save_key_file(GKeyFile* config, const gchar* path) { GError* error = NULL; gsize data_length = 0; gchar* data = g_key_file_to_data(config, &data_length, &error); if(error) { g_warning("[Configuration] Failed to save file: %s", error->message); g_clear_error(&error); } if(data) { g_file_set_contents(path, data, data_length, &error); if(error) { g_warning("[Configuration] Failed to save file: %s", error->message); g_clear_error(&error); } g_free(data); } } static gboolean get_int(GKeyFile* config, const gchar* group, const gchar* key, gint* out) { GError* error = NULL; *out = g_key_file_get_integer(config, group, key, &error); if(!error) return TRUE; if(g_error_matches(error, G_KEY_FILE_ERROR, G_KEY_FILE_ERROR_INVALID_VALUE)) g_warning("[Configuration] Failed to parse integer value [%s] %s: %s", group, key, error->message); g_clear_error(&error); return FALSE; } static gboolean get_bool(GKeyFile* config, const gchar* group, const gchar* key, gboolean* out) { GError* error = NULL; *out = g_key_file_get_boolean(config, group, key, &error); if(!error) return TRUE; if(g_error_matches(error, G_KEY_FILE_ERROR, G_KEY_FILE_ERROR_INVALID_VALUE)) g_warning("[Configuration] Failed to parse boolean value [%s] %s: %s", group, key, error->message); g_clear_error(&error); return FALSE; } gchar** config_get_groups(const gchar* prefix) { gsize groups_size = 0, i, next; gchar** groups = g_key_file_get_groups(greeter_config, &groups_size); for(i = next = 0; i < groups_size; ++i) if(groups[i] && g_str_has_prefix(groups[i], prefix)) { if(i != next) { g_free (groups[next]); groups[next] = groups[i]; groups[i] = NULL; } ++next; } if(groups) groups[next] = NULL; return groups; } gboolean config_has_key(const gchar* group, const gchar* key) { GKeyFile* file = get_file_for_group(&group); return g_key_file_has_key(file, group, key, NULL); } gchar* config_get_string(const gchar* group, const gchar* key, const gchar* fallback) { GKeyFile* file = get_file_for_group(&group); gchar* value = g_key_file_get_value(file, group, key, NULL); return value || !fallback ? value : g_strdup(fallback); } void config_set_string(const gchar* group, const gchar* key, const gchar* value) { if(get_file_for_group(&group) != state_config) { g_warning("[Configuration] %s(%s, %s, '%s')", __func__, group, key, value); return; } g_key_file_set_value(state_config, group, key, value); save_key_file(state_config, state_filename); } gchar** config_get_string_list(const gchar* group, const gchar* key, gchar** fallback) { GKeyFile* file = get_file_for_group(&group); gchar** value = g_key_file_get_string_list(file, group, key, NULL, NULL); return value || !fallback ? value : g_strdupv(fallback); } gint config_get_int(const gchar* group, const gchar* key, gint fallback) { GKeyFile* file = get_file_for_group(&group); gint value; if(!get_int(file, group, key, &value)) return fallback; return value; } void config_set_int(const gchar* group, const gchar* key, gint value) { if(get_file_for_group(&group) != state_config) { g_warning("[Configuration] %s(%s, %s, %d)", __func__, group, key, value); return; } g_key_file_set_integer(state_config, group, key, value); save_key_file(state_config, state_filename); } gboolean config_get_bool(const gchar* group, const gchar* key, gboolean fallback) { GKeyFile* file = get_file_for_group(&group); gboolean value; if(!get_bool(file, group, key, &value)) return fallback; return value; } void config_set_bool(const gchar* group, const gchar* key, gboolean value) { if(get_file_for_group(&group) != state_config) { g_warning("[Configuration] %s(%s, %s, %d)", __func__, group, key, value); return; } g_key_file_set_boolean(state_config, group, key, value); save_key_file(state_config, state_filename); } gint config_get_enum(const gchar* group, const gchar* key, gint fallback, const gchar* first_item, ...) { const gchar *item_name; GKeyFile *file; gchar *value; gboolean found = FALSE; va_list var_args; if(!first_item) return fallback; file = get_file_for_group(&group); value = g_key_file_get_value(file, group, key, NULL); if(!value) return fallback; va_start(var_args, first_item); item_name = first_item; while(item_name) { gint item_value = va_arg(var_args, gint); if(g_strcmp0(value, item_name) == 0) { found = TRUE; fallback = item_value; break; } item_name = va_arg(var_args, gchar*); } va_end(var_args); if(!found) g_warning("[Configuration] Failed to parse enum value [%s] %s: %s", group, key, value); return fallback; } lightdm-gtk-greeter-2.0.5/src/greeterbackground.c0000664000175000017500000017042613252332565024030 0ustar00bluesabrebluesabre00000000000000/* * Copyright (C) 2014 - 2018, Sean Davis * Copyright (C) 2014, Andrew P. * Copyright (C) 2015, Robert Ancell * Copyright (C) 2015, Simon Steinbeiß * * This program is free software: you can redistribute it and/or modify it under * the terms of the GNU General Public License as published by the Free Software * Foundation, either version 3 of the License, or (at your option) any later * version. See http://www.gnu.org/copyleft/gpl.html the full text of the * license. */ #include #include #include #include #include #include #include #include "greeterbackground.h" #include "greeterdeprecated.h" typedef enum { /* Broken/uninitialized configuration */ BACKGROUND_TYPE_INVALID, /* Do not use this monitor */ BACKGROUND_TYPE_SKIP, /* Do not override window background */ BACKGROUND_TYPE_DEFAULT, /* Solid color */ BACKGROUND_TYPE_COLOR, /* Path to image and scaling mode */ BACKGROUND_TYPE_IMAGE /* Maybe other types (e.g. gradient) */ } BackgroundType; static const gchar* BACKGROUND_TYPE_SKIP_VALUE = "#skip"; static const gchar* BACKGROUND_TYPE_DEFAULT_VALUE = "#default"; typedef enum { /* It is not really useful, used for debugging */ SCALING_MODE_SOURCE, /* Default mode for values without mode prefix */ SCALING_MODE_ZOOMED, SCALING_MODE_STRETCHED } ScalingMode; static const gchar* SCALING_MODE_PREFIXES[] = {"#source:", "#zoomed:", "#stretched:", NULL}; typedef gdouble (*TransitionFunction)(gdouble x); typedef void (*TransitionDraw)(gconstpointer monitor, cairo_t* cr); /* Background configuration (parsed from background=... option). Used to fill */ typedef struct { BackgroundType type; union { GdkRGBA color; struct { gchar *path; ScalingMode mode; } image; } options; } BackgroundConfig; /* Transition configuration Used as part of and */ typedef struct { /* Transition duration, in ms */ glong duration; TransitionFunction func; /* Function to draw monitor background */ TransitionDraw draw; } TransitionConfig; /* Store monitor configuration */ typedef struct { BackgroundConfig bg; gboolean user_bg; gboolean laptop; TransitionConfig transition; } MonitorConfig; /* Actual drawing information attached to monitor. * Used to separate configured monitor background and user background. */ typedef struct { gint ref_count; BackgroundType type; union { GdkPixbuf* image; GdkRGBA color; } options; } Background; typedef struct { GreeterBackground* object; gint number; gchar* name; GdkRectangle geometry; GtkWindow* window; gulong window_draw_handler_id; /* Configured background */ Background* background_configured; /* Current monitor background: &background_configured or &background_custom * Monitors with type = BACKGROUND_TYPE_SKIP have background = NULL */ Background* background; struct { TransitionConfig config; /* Old background, stage == 0.0 */ Background* from; /* New background, stage == 1.0 */ Background* to; guint timer_id; gint64 started; /* Current stage */ gdouble stage; } transition; } Monitor; static const Monitor INVALID_MONITOR_STRUCT = {0}; struct _GreeterBackground { GObject parent_instance; struct _GreeterBackgroundPrivate* priv; }; struct _GreeterBackgroundClass { GObjectClass parent_class; }; typedef struct _GreeterBackgroundPrivate GreeterBackgroundPrivate; struct _GreeterBackgroundPrivate { GdkScreen* screen; gulong screen_monitors_changed_handler_id; /* Widget to display on active monitor */ GtkWidget* child; /* List of groups for greeter screens windows */ GSList* accel_groups; /* Mapping monitor name to its config */ GHashTable* configs; /* Default config for unlisted monitors */ MonitorConfig* default_config; /* Array of configured monitors for current screen */ Monitor* monitors; gsize monitors_size; /* Name => , "Number" => */ GHashTable* monitors_map; GList* active_monitors_config; const Monitor* active_monitor; gboolean active_monitor_change_in_progress; gint64 active_monitor_change_last_timestamp; /* List of monitors with user-background=true*/ GSList* customized_monitors; /* Initialized by set_custom_background() */ BackgroundConfig customized_background; /* List of monitors with laptop=true */ GSList* laptop_monitors; /* DBus proxy to catch lid state changing */ GDBusProxy* laptop_upower_proxy; /* Cached lid state */ gboolean laptop_lid_closed; /* Use cursor position to determinate current active monitor (dynamic) */ gboolean follow_cursor; /* Use cursor position to determinate initial active monitor */ gboolean follow_cursor_to_init; }; enum { BACKGROUND_SIGNAL_ACTIVE_MONITOR_CHANGED, BACKGROUND_SIGNAL_LAST }; static guint background_signals[BACKGROUND_SIGNAL_LAST] = {0}; static const gchar* DBUS_UPOWER_NAME = "org.freedesktop.UPower"; static const gchar* DBUS_UPOWER_PATH = "/org/freedesktop/UPower"; static const gchar* DBUS_UPOWER_INTERFACE = "org.freedesktop.UPower"; static const gchar* DBUS_UPOWER_PROP_LID_IS_PRESENT = "LidIsPresent"; static const gchar* DBUS_UPOWER_PROP_LID_IS_CLOSED = "LidIsClosed"; static const gchar* ACTIVE_MONITOR_CURSOR_TAG = "#cursor"; G_DEFINE_TYPE_WITH_PRIVATE(GreeterBackground, greeter_background, G_TYPE_OBJECT); void greeter_background_disconnect (GreeterBackground* background); static gboolean greeter_background_find_monitor_data(GreeterBackground* background, GHashTable* table, const Monitor* monitor, gpointer* data); static void greeter_background_set_active_monitor (GreeterBackground* background, const Monitor* active); static void greeter_background_get_cursor_position (GreeterBackground* background, gint* x, gint* y); static void greeter_background_set_cursor_position (GreeterBackground* background, gint x, gint y); static void greeter_background_try_init_dbus (GreeterBackground* background); static void greeter_background_stop_dbus (GreeterBackground* background); static gboolean greeter_background_monitor_enabled (GreeterBackground* background, const Monitor* monitor); static void greeter_background_dbus_changed_cb (GDBusProxy* proxy, GVariant* changed_properties, const gchar* const* invalidated_properties, GreeterBackground* background); static void greeter_background_monitors_changed_cb (GdkScreen* screen, GreeterBackground* background); static void greeter_background_child_destroyed_cb (GtkWidget* child, GreeterBackground* background); /* struct BackgroundConfig */ static gboolean background_config_initialize (BackgroundConfig* config, const gchar* value); static void background_config_finalize (BackgroundConfig* config); static void background_config_copy (const BackgroundConfig* source, BackgroundConfig* dest); /* struct MonitorConfig */ static void monitor_config_free (MonitorConfig* config); /* Copy source config to dest, return dest. Allocate memory if dest == NULL. */ static MonitorConfig* monitor_config_copy (const MonitorConfig* source, MonitorConfig* dest); /* struct Background */ static Background* background_new (const BackgroundConfig* config, const Monitor* monitor, GHashTable* images_cache); static Background* background_ref (Background* bg); static void background_unref (Background** bg); static void background_finalize (Background* bg); /* struct Monitor */ static void monitor_finalize (Monitor* info); static void monitor_set_background (Monitor* monitor, Background* background); static void monitor_start_transition (Monitor* monitor, Background* from, Background* to); static void monitor_stop_transition (Monitor* monitor); static gboolean monitor_transition_cb (GtkWidget *widget, GdkFrameClock* frame_clock, Monitor* monitor); static void monitor_transition_draw_alpha (const Monitor* monitor, cairo_t* cr); static void monitor_draw_background (const Monitor* monitor, const Background* background, cairo_t* cr); static gboolean monitor_window_draw_cb (GtkWidget* widget, cairo_t* cr, const Monitor* monitor); static gboolean monitor_window_enter_notify_cb (GtkWidget* widget, GdkEventCrossing* event, const Monitor* monitor); static GdkPixbuf* scale_image_file (const gchar* path, ScalingMode mode, gint width, gint height, GHashTable* cache); static GdkPixbuf* scale_image (GdkPixbuf* source, ScalingMode mode, gint width, gint height); static cairo_surface_t* create_root_surface (GdkScreen* screen); static void set_root_pixmap_id (GdkScreen* screen, Display* display, Pixmap xpixmap); static void set_surface_as_root (GdkScreen* screen, cairo_surface_t* surface); static gdouble transition_func_linear (gdouble x); static gdouble transition_func_ease_in_out (gdouble x); /* Implemented in lightdm-gtk-greeter.c */ gpointer greeter_save_focus(GtkWidget* widget); void greeter_restore_focus(const gpointer saved_data); static const MonitorConfig DEFAULT_MONITOR_CONFIG = { .bg = { .type = BACKGROUND_TYPE_COLOR, .options = { .color = {.red = 0.0, .green = 0.0, .blue = 0.0, .alpha = 1.0} } }, .user_bg = TRUE, .laptop = FALSE, .transition = { .duration = 500, .func = transition_func_ease_in_out, .draw = (TransitionDraw)monitor_transition_draw_alpha } }; /* Implementation */ static void greeter_background_class_init(GreeterBackgroundClass* klass) { GObjectClass* gobject_class = G_OBJECT_CLASS(klass); background_signals[BACKGROUND_SIGNAL_ACTIVE_MONITOR_CHANGED] = g_signal_new("active-monitor-changed", G_TYPE_FROM_CLASS(gobject_class), G_SIGNAL_RUN_FIRST, 0, /* class_offset */ NULL /* accumulator */, NULL /* accu_data */, g_cclosure_marshal_VOID__VOID, G_TYPE_NONE, 0); } static void greeter_background_init(GreeterBackground* self) { GreeterBackgroundPrivate* priv = G_TYPE_INSTANCE_GET_PRIVATE(self, GREETER_BACKGROUND_TYPE, GreeterBackgroundPrivate); self->priv = priv; priv->screen = NULL; priv->screen_monitors_changed_handler_id = 0; priv->accel_groups = NULL; priv->configs = g_hash_table_new_full(g_str_hash, g_str_equal, g_free, (GDestroyNotify)monitor_config_free); priv->default_config = monitor_config_copy(&DEFAULT_MONITOR_CONFIG, NULL); priv->monitors = NULL; priv->monitors_size = 0; priv->monitors_map = NULL; priv->customized_monitors = NULL; priv->customized_background.type = BACKGROUND_TYPE_INVALID; priv->active_monitors_config = NULL; priv->active_monitor = NULL; priv->laptop_monitors = NULL; priv->laptop_upower_proxy = NULL; priv->laptop_lid_closed = FALSE; } GreeterBackground* greeter_background_new(GtkWidget* child) { GreeterBackground *background; g_return_val_if_fail(child != NULL, NULL); background = GREETER_BACKGROUND(g_object_new(greeter_background_get_type(), NULL)); background->priv->child = child; g_signal_connect(background->priv->child, "destroy", G_CALLBACK(greeter_background_child_destroyed_cb), background); return background; } void greeter_background_set_active_monitor_config(GreeterBackground* background, const gchar* value) { GreeterBackgroundPrivate *priv; gchar **iter; gchar **values; g_return_if_fail(GREETER_IS_BACKGROUND(background)); priv = background->priv; g_list_free_full(priv->active_monitors_config, g_free); priv->active_monitors_config = NULL; priv->active_monitor_change_in_progress = FALSE; priv->active_monitor_change_last_timestamp = 0; priv->follow_cursor = FALSE; priv->follow_cursor_to_init = FALSE; if (!value || !*value) return; values = g_strsplit(value, ";", -1); for(iter = values; *iter; ++iter) { const gchar* tag = *iter; if (g_strcmp0(tag, ACTIVE_MONITOR_CURSOR_TAG) == 0) { priv->follow_cursor = TRUE; priv->follow_cursor_to_init = (priv->active_monitors_config == NULL); } else priv->active_monitors_config = g_list_prepend(priv->active_monitors_config, g_strdup(tag)); } g_strfreev(values); priv->active_monitors_config = g_list_reverse(priv->active_monitors_config); } void greeter_background_set_monitor_config(GreeterBackground* background, const gchar* name, const gchar* bg, gint user_bg, gint laptop, gint transition_duration, TransitionType transition_type) { GreeterBackgroundPrivate *priv; MonitorConfig *config; const MonitorConfig *FALLBACK; g_return_if_fail(GREETER_IS_BACKGROUND(background)); priv = background->priv; config = g_new0(MonitorConfig, 1); FALLBACK = (g_strcmp0(name, GREETER_BACKGROUND_DEFAULT) == 0) ? &DEFAULT_MONITOR_CONFIG : priv->default_config; if(!background_config_initialize(&config->bg, bg)) background_config_copy(&FALLBACK->bg, &config->bg); config->user_bg = user_bg >= 0 ? user_bg : FALLBACK->user_bg; config->laptop = laptop >= 0 ? laptop : FALLBACK->laptop; config->transition.duration = transition_duration >= 0 ? transition_duration : FALLBACK->transition.duration; config->transition.draw = FALLBACK->transition.draw; switch(transition_type) { case TRANSITION_TYPE_NONE: config->transition.func = NULL; break; case TRANSITION_TYPE_LINEAR: config->transition.func = transition_func_linear; break; case TRANSITION_TYPE_EASE_IN_OUT: config->transition.func = transition_func_ease_in_out; break; case TRANSITION_TYPE_FALLBACK: default: config->transition.func = FALLBACK->transition.func; } if(FALLBACK == priv->default_config) g_hash_table_insert(priv->configs, g_strdup(name), config); else { if(priv->default_config) monitor_config_free(priv->default_config); priv->default_config = config; } } void greeter_background_remove_monitor_config(GreeterBackground* background, const gchar* name) { g_return_if_fail(GREETER_IS_BACKGROUND(background)); g_hash_table_remove(background->priv->configs, name); } gchar** greeter_background_get_configured_monitors(GreeterBackground* background) { GreeterBackgroundPrivate *priv; GHashTableIter iter; gpointer key; gchar **names; gint n; g_return_val_if_fail(GREETER_IS_BACKGROUND(background), NULL); priv = background->priv; n = g_hash_table_size(priv->configs); names = g_new(gchar*, n + 1); names[n--] = NULL; g_hash_table_iter_init(&iter, priv->configs); while(g_hash_table_iter_next(&iter, &key, NULL)) names[n--] = g_strdup(key); return names; } void greeter_background_connect(GreeterBackground* background, GdkScreen* screen) { GreeterBackgroundPrivate *priv; GHashTable *images_cache; Monitor *first_not_skipped_monitor = NULL; cairo_region_t *screen_region; gpointer saved_focus = NULL; guint i; g_return_if_fail(GREETER_IS_BACKGROUND(background)); g_return_if_fail(GDK_IS_SCREEN(screen)); g_debug("[Background] Connecting to screen: %p (%dx%dpx, %dx%dmm)", screen, greeter_screen_get_width(screen), greeter_screen_get_height(screen), greeter_screen_get_width_mm(screen), greeter_screen_get_height_mm(screen)); priv = background->priv; saved_focus = NULL; if(priv->screen) { if (priv->active_monitor) saved_focus = greeter_save_focus(priv->child); greeter_background_disconnect(background); } priv->screen = screen; priv->monitors_size = greeter_screen_get_n_monitors(screen); priv->monitors = g_new0(Monitor, priv->monitors_size); priv->monitors_map = g_hash_table_new_full(g_str_hash, g_str_equal, g_free, NULL); g_debug("[Background] Monitors found: %" G_GSIZE_FORMAT, priv->monitors_size); /* Used to track situation when all monitors marked as "#skip" */ first_not_skipped_monitor = NULL; images_cache = g_hash_table_new_full (g_str_hash, g_str_equal, g_free, g_object_unref); screen_region = cairo_region_create(); for(i = 0; i < priv->monitors_size; ++i) { const MonitorConfig* config; Monitor* monitor = &priv->monitors[i]; const gchar* printable_name; gchar* window_name; GSList* item; Background* bg = NULL; monitor->object = background; monitor->name = g_strdup(greeter_screen_get_monitor_plug_name(screen, i)); monitor->number = i; printable_name = monitor->name ? monitor->name : ""; greeter_screen_get_monitor_geometry(screen, i, &monitor->geometry); g_debug("[Background] Monitor: %s #%d (%dx%d at %dx%d)%s", printable_name, i, monitor->geometry.width, monitor->geometry.height, monitor->geometry.x, monitor->geometry.y, ((gint)i == greeter_screen_get_primary_monitor(screen)) ? " primary" : ""); if(!greeter_background_find_monitor_data(background, priv->configs, monitor, (gpointer*)&config)) { g_debug("[Background] No configuration options for monitor %s #%d, using default", printable_name, i); config = priv->default_config; } /* Force last skipped monitor to be active monitor, if there is no other choice */ if(config->bg.type == BACKGROUND_TYPE_SKIP) { if(i < priv->monitors_size - 1 || first_not_skipped_monitor) { g_debug("[Background] Skipping monitor %s #%d", printable_name, i); continue; } g_debug("[Background] Monitor %s #%d can not be skipped, using default configuration for it", printable_name, i); if(priv->default_config->bg.type != BACKGROUND_TYPE_SKIP) config = priv->default_config; else config = &DEFAULT_MONITOR_CONFIG; } /* Simple check to skip fully overlapped monitors. Actually, it's can track only monitors in "mirrors" mode. Nothing more. */ if(cairo_region_contains_rectangle(screen_region, &monitor->geometry) == CAIRO_REGION_OVERLAP_IN) { g_debug("[Background] Skipping monitor %s #%d, its area is already used by other monitors", printable_name, i); continue; } cairo_region_union_rectangle(screen_region, &monitor->geometry); if(!first_not_skipped_monitor) first_not_skipped_monitor = monitor; monitor->window = GTK_WINDOW(gtk_window_new(GTK_WINDOW_TOPLEVEL)); gtk_window_set_type_hint(monitor->window, GDK_WINDOW_TYPE_HINT_DESKTOP); gtk_window_set_keep_below(monitor->window, TRUE); gtk_window_set_resizable(monitor->window, FALSE); gtk_widget_set_app_paintable(GTK_WIDGET(monitor->window), TRUE); gtk_window_set_screen(monitor->window, screen); gtk_widget_set_size_request(GTK_WIDGET(monitor->window), monitor->geometry.width, monitor->geometry.height); gtk_window_move(monitor->window, monitor->geometry.x, monitor->geometry.y); gtk_widget_show(GTK_WIDGET(monitor->window)); monitor->window_draw_handler_id = g_signal_connect(G_OBJECT(monitor->window), "draw", G_CALLBACK(monitor_window_draw_cb), monitor); window_name = monitor->name ? g_strdup_printf("monitor-%s", monitor->name) : g_strdup_printf("monitor-%d", i); gtk_widget_set_name(GTK_WIDGET(monitor->window), window_name); gtk_style_context_add_class(gtk_widget_get_style_context(GTK_WIDGET(monitor->window)), "lightdm-gtk-greeter"); g_free(window_name); for(item = priv->accel_groups; item != NULL; item = g_slist_next(item)) gtk_window_add_accel_group(monitor->window, item->data); g_signal_connect(G_OBJECT(monitor->window), "enter-notify-event", G_CALLBACK(monitor_window_enter_notify_cb), monitor); if(config->user_bg) priv->customized_monitors = g_slist_prepend(priv->customized_monitors, monitor); if(config->laptop) priv->laptop_monitors = g_slist_prepend(priv->laptop_monitors, monitor); if(config->transition.duration && config->transition.func) monitor->transition.config = config->transition; monitor->background_configured = background_new(&config->bg, monitor, images_cache); if(!monitor->background_configured) monitor->background_configured = background_new(&DEFAULT_MONITOR_CONFIG.bg, monitor, images_cache); if(config->user_bg && priv->customized_background.type != BACKGROUND_TYPE_INVALID) bg = background_new(&priv->customized_background, monitor, images_cache); if(bg) { monitor_set_background(monitor, bg); background_unref(&bg); } else monitor_set_background(monitor, monitor->background_configured); if(monitor->name) g_hash_table_insert(priv->monitors_map, g_strdup(monitor->name), monitor); g_hash_table_insert(priv->monitors_map, g_strdup_printf("%d", i), monitor); } g_hash_table_unref(images_cache); if(priv->laptop_monitors && !priv->laptop_upower_proxy) greeter_background_try_init_dbus(background); else if(!priv->laptop_monitors) greeter_background_stop_dbus(background); if(priv->follow_cursor_to_init) { gint x, y; greeter_background_get_cursor_position(background, &x, &y); for(i = 0; i < priv->monitors_size && !priv->active_monitor; ++i) { const Monitor* monitor = &priv->monitors[i]; if(greeter_background_monitor_enabled(background, monitor) && x >= monitor->geometry.x && x < monitor->geometry.x + monitor->geometry.width && y >= monitor->geometry.y && y < monitor->geometry.y + monitor->geometry.height) { g_debug("[Background] Pointer position will be used to set active monitor: %dx%d", x, y); greeter_background_set_active_monitor(background, monitor); break; } } } if(!priv->active_monitor) greeter_background_set_active_monitor(background, NULL); if(saved_focus) { greeter_restore_focus(saved_focus); g_free(saved_focus); } priv->screen_monitors_changed_handler_id = g_signal_connect(G_OBJECT(screen), "monitors-changed", G_CALLBACK(greeter_background_monitors_changed_cb), background); } void greeter_background_disconnect(GreeterBackground* background) { GreeterBackgroundPrivate *priv; guint i; g_return_if_fail(GREETER_IS_BACKGROUND(background)); priv = background->priv; if(priv->screen_monitors_changed_handler_id) g_signal_handler_disconnect(priv->screen, priv->screen_monitors_changed_handler_id); priv->screen_monitors_changed_handler_id = 0; priv->screen = NULL; priv->active_monitor = NULL; for(i = 0; i < priv->monitors_size; ++i) monitor_finalize(&priv->monitors[i]); g_free(priv->monitors); priv->monitors = NULL; priv->monitors_size = 0; g_hash_table_unref(priv->monitors_map); priv->monitors_map = NULL; g_slist_free(priv->customized_monitors); priv->customized_monitors = NULL; g_slist_free(priv->laptop_monitors); priv->laptop_monitors = NULL; } /* Moved to separate function to simplify needless and unnecessary syntax expansion in future (regex) */ static gboolean greeter_background_find_monitor_data(GreeterBackground* background, GHashTable* table, const Monitor* monitor, gpointer* data) { if(!monitor->name || !g_hash_table_lookup_extended(table, monitor->name, NULL, data)) { gchar* num_str = g_strdup_printf("%d", monitor->number); gboolean result = g_hash_table_lookup_extended(table, num_str, NULL, data); g_free(num_str); return result; } return TRUE; } static void greeter_background_set_active_monitor(GreeterBackground* background, const Monitor* active) { GreeterBackgroundPrivate* priv = background->priv; gint x, y; gint64 timestamp; if (priv->active_monitor_change_in_progress) return; /* Prevents infinite signal emmission between two monitors (LP: #1410406, #1509780) * There are some rare scenarios when using multiple monitors that cause the greeter * to switch back and forth between the monitors indefinitely. By comparing the * timestamp at this precision (1/10th of a second), this should no longer be * possible. */ if (active != NULL) { timestamp = floor(g_get_monotonic_time () * 0.00001); if (timestamp == priv->active_monitor_change_last_timestamp) { g_debug("[Background] Preventing infinite monitor loop"); return; } } priv->active_monitor_change_in_progress = TRUE; priv->active_monitor_change_last_timestamp = floor(g_get_monotonic_time () * 0.00001); if(active && !active->background) { if(priv->active_monitor) goto active_monitor_change_complete; active = NULL; } /* Auto */ if(!active) { /* Normal way: at least one configured active monitor is not disabled */ GList* iter; for(iter = priv->active_monitors_config; iter && !active; iter = g_list_next(iter)) { const Monitor* monitor = g_hash_table_lookup(priv->monitors_map, iter->data); if(monitor && monitor->background && greeter_background_monitor_enabled(background, monitor)) active = monitor; if(active) g_debug("[Background] Active monitor is not specified, using first enabled monitor from 'active-monitor' list"); } /* All monitors listed in active-monitor-config are disabled (or option is empty) */ /* Using primary monitor */ if(!active) { gint num = greeter_screen_get_primary_monitor(priv->screen); if ((guint)num >= priv->monitors_size) goto active_monitor_change_complete; active = &priv->monitors[num]; if(!active->background || !greeter_background_monitor_enabled(background, active)) active = NULL; if(active) g_debug("[Background] Active monitor is not specified, using primary monitor"); } /* Fallback: first enabled and/or not skipped monitor (screen always have one) */ if(!active) { guint i; const Monitor* first_not_skipped = NULL; for(i = 0; i < priv->monitors_size && !active; ++i) { const Monitor* monitor = &priv->monitors[i]; if(!monitor->background) continue; if(greeter_background_monitor_enabled(background, monitor)) active = monitor; if(!first_not_skipped) first_not_skipped = active; } if(!active) active = first_not_skipped; if(active) g_debug("[Background] Active monitor is not specified, using first enabled monitor"); } if(!active && priv->laptop_monitors) { active = priv->laptop_monitors->data; g_debug("[Background] Active monitor is not specified, using laptop monitor"); } } if(!active) { if(priv->active_monitor) g_warning("[Background] Active monitor is not specified, failed to identify. Active monitor stays the same: %s #%d", priv->active_monitor->name, priv->active_monitor->number); else g_warning("[Background] Active monitor is not specified, failed to identify. Active monitor stays the same: "); goto active_monitor_change_complete; } if(active == priv->active_monitor) goto active_monitor_change_complete; priv->active_monitor = active; if (priv->active_monitor == NULL) goto active_monitor_change_complete; if(priv->child) { GtkWidget* old_parent = gtk_widget_get_parent(priv->child); gpointer focus = greeter_save_focus(priv->child); if(old_parent) greeter_widget_reparent(priv->child, GTK_WIDGET(active->window)); else gtk_container_add(GTK_CONTAINER(active->window), priv->child); gtk_window_present(active->window); greeter_restore_focus(focus); g_free(focus); } else g_warning("[Background] Child widget is destroyed or not defined"); g_debug("[Background] Active monitor changed to: %s #%d", active->name, active->number); g_signal_emit(background, background_signals[BACKGROUND_SIGNAL_ACTIVE_MONITOR_CHANGED], 0); greeter_background_get_cursor_position(background, &x, &y); /* Do not center cursor if it is already inside active monitor */ if(x < active->geometry.x || x >= active->geometry.x + active->geometry.width || y < active->geometry.y || y >= active->geometry.y + active->geometry.height) greeter_background_set_cursor_position(background, active->geometry.x + active->geometry.width/2, active->geometry.y + active->geometry.height/2); active_monitor_change_complete: priv->active_monitor_change_in_progress = FALSE; return; } static void greeter_background_get_cursor_position(GreeterBackground* background, gint* x, gint* y) { GreeterBackgroundPrivate* priv = background->priv; GdkDisplay* display = gdk_screen_get_display(priv->screen); GdkDeviceManager* device_manager = greeter_display_get_device_manager(display); GdkDevice* device = greeter_device_manager_get_client_pointer(device_manager); gdk_device_get_position(device, NULL, x, y); } static void greeter_background_set_cursor_position(GreeterBackground* background, gint x, gint y) { GreeterBackgroundPrivate* priv = background->priv; GdkDisplay* display = gdk_screen_get_display(priv->screen); GdkDeviceManager* device_manager = greeter_display_get_device_manager(display); gdk_device_warp(greeter_device_manager_get_client_pointer(device_manager), priv->screen, x, y); } static void greeter_background_try_init_dbus(GreeterBackground* background) { GreeterBackgroundPrivate *priv; GError *error = NULL; GVariant *variant; gboolean lid_present; g_debug("[Background] Creating DBus proxy"); priv = background->priv; if(priv->laptop_upower_proxy) greeter_background_stop_dbus(background); priv->laptop_upower_proxy = g_dbus_proxy_new_for_bus_sync( G_BUS_TYPE_SYSTEM, G_DBUS_PROXY_FLAGS_NONE, NULL, /* interface info */ DBUS_UPOWER_NAME, DBUS_UPOWER_PATH, DBUS_UPOWER_INTERFACE, NULL, /* cancellable */ &error); if(!priv->laptop_upower_proxy) { if(error) g_warning("[Background] Failed to create dbus proxy: %s", error->message); g_clear_error(&error); return; } variant = g_dbus_proxy_get_cached_property(priv->laptop_upower_proxy, DBUS_UPOWER_PROP_LID_IS_PRESENT); lid_present = g_variant_get_boolean(variant); g_variant_unref(variant); g_debug("[Background] UPower.%s property value: %d", DBUS_UPOWER_PROP_LID_IS_PRESENT, lid_present); if(!lid_present) greeter_background_stop_dbus(background); else { variant = g_dbus_proxy_get_cached_property(priv->laptop_upower_proxy, DBUS_UPOWER_PROP_LID_IS_CLOSED); priv->laptop_lid_closed = g_variant_get_boolean(variant); g_variant_unref(variant); g_signal_connect(priv->laptop_upower_proxy, "g-properties-changed", G_CALLBACK(greeter_background_dbus_changed_cb), background); } } static void greeter_background_stop_dbus(GreeterBackground* background) { if(!background->priv->laptop_upower_proxy) return; g_clear_object(&background->priv->laptop_upower_proxy); } static gboolean greeter_background_monitor_enabled(GreeterBackground* background, const Monitor* monitor) { GreeterBackgroundPrivate* priv = background->priv; if(priv->laptop_upower_proxy && g_slist_find(priv->laptop_monitors, monitor)) return !priv->laptop_lid_closed; return TRUE; } static void greeter_background_dbus_changed_cb(GDBusProxy* proxy, GVariant* changed_properties, const gchar* const* invalidated_properties, GreeterBackground* background) { GreeterBackgroundPrivate *priv; GVariant *variant; gboolean new_state; g_return_if_fail(GREETER_IS_BACKGROUND(background)); priv = background->priv; variant = g_dbus_proxy_get_cached_property(priv->laptop_upower_proxy, DBUS_UPOWER_PROP_LID_IS_CLOSED); new_state = g_variant_get_boolean(variant); g_variant_unref(variant); if(new_state == priv->laptop_lid_closed) return; priv->laptop_lid_closed = new_state; g_debug("[Background] UPower: lid state changed to '%s'", priv->laptop_lid_closed ? "closed" : "opened"); if(priv->laptop_monitors) { if(priv->laptop_lid_closed) { if(g_slist_find(priv->laptop_monitors, priv->active_monitor)) greeter_background_set_active_monitor(background, NULL); } else { if(!priv->follow_cursor) greeter_background_set_active_monitor(background, NULL); } } } static void greeter_background_monitors_changed_cb(GdkScreen* screen, GreeterBackground* background) { g_return_if_fail(GREETER_IS_BACKGROUND(background)); greeter_background_connect(background, screen); } static void greeter_background_child_destroyed_cb(GtkWidget* child, GreeterBackground* background) { background->priv->child = NULL; } void greeter_background_set_custom_background(GreeterBackground* background, const gchar* value) { GreeterBackgroundPrivate *priv; GHashTable *images_cache = NULL; GSList *iter; g_return_if_fail(GREETER_IS_BACKGROUND(background)); priv = background->priv; if(priv->customized_background.type != BACKGROUND_TYPE_INVALID) background_config_finalize(&priv->customized_background); background_config_initialize(&priv->customized_background, value); if(!priv->customized_monitors) return; if(priv->customized_background.type == BACKGROUND_TYPE_IMAGE) images_cache = g_hash_table_new_full(g_str_hash, g_str_equal, g_free, g_object_unref); for(iter = priv->customized_monitors; iter; iter = g_slist_next(iter)) { Monitor *monitor = iter->data; /* Old background_custom (if used) will be unrefed in monitor_set_background() */ Background* bg = NULL; if(priv->customized_background.type != BACKGROUND_TYPE_INVALID) bg = background_new(&priv->customized_background, monitor, images_cache); if(bg) { monitor_set_background(monitor, bg); background_unref(&bg); } else monitor_set_background(monitor, monitor->background_configured); } if(images_cache) g_hash_table_unref(images_cache); } void greeter_background_save_xroot(GreeterBackground* background) { GreeterBackgroundPrivate *priv; cairo_surface_t *surface; cairo_t *cr; gsize i; const GdkRGBA ROOT_COLOR = {1.0, 1.0, 1.0, 1.0}; g_return_if_fail(GREETER_IS_BACKGROUND(background)); priv = background->priv; surface = create_root_surface(priv->screen); cr = cairo_create(surface); gdk_cairo_set_source_rgba(cr, &ROOT_COLOR); cairo_paint(cr); for(i = 0; i < priv->monitors_size; ++i) { const Monitor* monitor = &priv->monitors[i]; if(!monitor->background) continue; cairo_save(cr); cairo_translate(cr, monitor->geometry.x, monitor->geometry.y); monitor_draw_background(monitor, monitor->background, cr); cairo_restore(cr); } set_surface_as_root(priv->screen, surface); cairo_destroy(cr); cairo_surface_destroy(surface); } const GdkRectangle* greeter_background_get_active_monitor_geometry(GreeterBackground* background) { GreeterBackgroundPrivate *priv; g_return_val_if_fail(GREETER_IS_BACKGROUND(background), NULL); priv = background->priv; return priv->active_monitor ? &priv->active_monitor->geometry : NULL; } void greeter_background_add_accel_group(GreeterBackground* background, GtkAccelGroup* group) { GreeterBackgroundPrivate *priv; g_return_if_fail(GREETER_IS_BACKGROUND(background)); g_return_if_fail(group != NULL); priv = background->priv; if(priv->monitors) { guint i; for(i = 0; i < priv->monitors_size; ++i) if(priv->monitors[i].window) gtk_window_add_accel_group(priv->monitors[i].window, group); } priv->accel_groups = g_slist_append(priv->accel_groups, group); } static gboolean background_config_initialize(BackgroundConfig* config, const gchar* value) { config->type = BACKGROUND_TYPE_INVALID; if(!value || strlen(value) == 0) return FALSE; if(g_strcmp0(value, BACKGROUND_TYPE_SKIP_VALUE) == 0) config->type = BACKGROUND_TYPE_SKIP; else if(g_strcmp0(value, BACKGROUND_TYPE_DEFAULT_VALUE) == 0) config->type = BACKGROUND_TYPE_DEFAULT; else if(gdk_rgba_parse(&config->options.color, value)) config->type = BACKGROUND_TYPE_COLOR; else { const gchar** prefix = SCALING_MODE_PREFIXES; while(*prefix && !g_str_has_prefix(value, *prefix)) ++prefix; if(*prefix) { config->options.image.mode = (ScalingMode)(prefix - SCALING_MODE_PREFIXES); value += strlen(*prefix); } else config->options.image.mode = SCALING_MODE_ZOOMED; config->options.image.path = g_strdup(value); config->type = BACKGROUND_TYPE_IMAGE; } return TRUE; } static void background_config_finalize(BackgroundConfig* config) { switch(config->type) { case BACKGROUND_TYPE_IMAGE: g_free(config->options.image.path); break; case BACKGROUND_TYPE_COLOR: case BACKGROUND_TYPE_DEFAULT: case BACKGROUND_TYPE_SKIP: break; case BACKGROUND_TYPE_INVALID: default: g_return_if_reached(); } config->type = BACKGROUND_TYPE_INVALID; } static void background_config_copy(const BackgroundConfig* source, BackgroundConfig* dest) { *dest = *source; switch(dest->type) { case BACKGROUND_TYPE_IMAGE: dest->options.image.path = g_strdup(source->options.image.path); break; case BACKGROUND_TYPE_COLOR: case BACKGROUND_TYPE_DEFAULT: case BACKGROUND_TYPE_SKIP: break; case BACKGROUND_TYPE_INVALID: default: g_return_if_reached(); } } static void monitor_config_free(MonitorConfig* config) { background_config_finalize(&config->bg); g_free(config); } static MonitorConfig* monitor_config_copy(const MonitorConfig* source, MonitorConfig* dest) { if(!dest) dest = g_new0(MonitorConfig, 1); background_config_copy(&source->bg, &dest->bg); dest->user_bg = source->user_bg; dest->laptop = source->laptop; dest->transition = source->transition; return dest; } static Background* background_new(const BackgroundConfig* config, const Monitor* monitor, GHashTable* images_cache) { Background *result; Background bg = {0}; switch(config->type) { case BACKGROUND_TYPE_IMAGE: bg.options.image = scale_image_file(config->options.image.path, config->options.image.mode, monitor->geometry.width, monitor->geometry.height, images_cache); if(!bg.options.image) { g_warning("[Background] Failed to read wallpaper: %s", config->options.image.path); return NULL; } break; case BACKGROUND_TYPE_COLOR: bg.options.color = config->options.color; break; case BACKGROUND_TYPE_DEFAULT: break; case BACKGROUND_TYPE_SKIP: case BACKGROUND_TYPE_INVALID: default: g_return_val_if_reached(NULL); } bg.type = config->type; bg.ref_count = 1; result = g_new(Background, 1); *result = bg; return result; } static Background* background_ref(Background* bg) { bg->ref_count++; return bg; } static void background_unref(Background** bg) { if(!*bg) return; (*bg)->ref_count--; if((*bg)->ref_count == 0) { background_finalize(*bg); *bg = NULL; } } static void background_finalize(Background* bg) { switch(bg->type) { case BACKGROUND_TYPE_IMAGE: g_clear_object(&bg->options.image); break; case BACKGROUND_TYPE_COLOR: case BACKGROUND_TYPE_DEFAULT: break; case BACKGROUND_TYPE_SKIP: case BACKGROUND_TYPE_INVALID: default: g_return_if_reached(); } bg->type = BACKGROUND_TYPE_INVALID; } static void monitor_set_background(Monitor* monitor, Background* background) { if(monitor->background == background) return; monitor_stop_transition(monitor); switch(background->type) { case BACKGROUND_TYPE_IMAGE: case BACKGROUND_TYPE_COLOR: gtk_widget_set_app_paintable(GTK_WIDGET(monitor->window), TRUE); if(monitor->transition.config.duration > 0 && monitor->background && monitor->background->type != BACKGROUND_TYPE_DEFAULT) monitor_start_transition(monitor, monitor->background, background); break; case BACKGROUND_TYPE_DEFAULT: gtk_widget_set_app_paintable(GTK_WIDGET(monitor->window), FALSE); break; case BACKGROUND_TYPE_SKIP: case BACKGROUND_TYPE_INVALID: default: g_return_if_reached(); } background_unref(&monitor->background); monitor->background = background_ref(background); gtk_widget_queue_draw(GTK_WIDGET(monitor->window)); } static void monitor_start_transition(Monitor* monitor, Background* from, Background* to) { monitor_stop_transition(monitor); monitor->transition.from = background_ref(from); monitor->transition.to = background_ref(to); monitor->transition.started = g_get_monotonic_time(); monitor->transition.timer_id = gtk_widget_add_tick_callback(GTK_WIDGET(monitor->window), (GtkTickCallback)monitor_transition_cb, monitor, NULL); monitor->transition.stage = 0; } static void monitor_stop_transition(Monitor* monitor) { if(!monitor->transition.timer_id) return; gtk_widget_remove_tick_callback(GTK_WIDGET(monitor->window), monitor->transition.timer_id); monitor->transition.timer_id = 0; monitor->transition.started = 0; monitor->transition.stage = 0; background_unref(&monitor->transition.to); background_unref(&monitor->transition.from); } static gboolean monitor_transition_cb(GtkWidget *widget, GdkFrameClock* frame_clock, Monitor* monitor) { gint64 span; gdouble x; if(!monitor->transition.timer_id) return G_SOURCE_REMOVE; span = g_get_monotonic_time() - monitor->transition.started; x = CLAMP(span/monitor->transition.config.duration/1000.0, 0.0, 1.0); monitor->transition.stage = monitor->transition.config.func(x); if(x >= 1.0) monitor_stop_transition(monitor); gtk_widget_queue_draw(GTK_WIDGET(monitor->window)); return x >= 1.0 ? G_SOURCE_REMOVE : G_SOURCE_CONTINUE; } static void monitor_transition_draw_alpha(const Monitor* monitor, cairo_t* cr) { cairo_pattern_t* alpha_pattern; monitor_draw_background(monitor, monitor->transition.from, cr); cairo_push_group(cr); monitor_draw_background(monitor, monitor->transition.to, cr); cairo_pop_group_to_source(cr); alpha_pattern = cairo_pattern_create_rgba(0.0, 0.0, 0.0, monitor->transition.stage); cairo_mask(cr, alpha_pattern); cairo_pattern_destroy(alpha_pattern); } static void monitor_finalize(Monitor* monitor) { if(monitor->transition.config.duration) { monitor_stop_transition(monitor); if(monitor->transition.timer_id) g_source_remove(monitor->transition.timer_id); monitor->transition.config.duration = 0; } if(monitor->window_draw_handler_id) g_signal_handler_disconnect(monitor->window, monitor->window_draw_handler_id); background_unref(&monitor->background_configured); background_unref(&monitor->background); if(monitor->window) { GtkWidget* child = gtk_bin_get_child(GTK_BIN(monitor->window)); if(child) /* remove greeter widget to avoid "destroy" signal */ gtk_container_remove(GTK_CONTAINER(monitor->window), child); gtk_widget_destroy(GTK_WIDGET(monitor->window)); } g_free(monitor->name); *monitor = INVALID_MONITOR_STRUCT; } static void monitor_draw_background(const Monitor* monitor, const Background* background, cairo_t* cr) { g_return_if_fail(monitor != NULL); g_return_if_fail(background != NULL); switch(background->type) { case BACKGROUND_TYPE_IMAGE: if(background->options.image) { gdk_cairo_set_source_pixbuf(cr, background->options.image, 0, 0); cairo_paint(cr); } break; case BACKGROUND_TYPE_COLOR: cairo_rectangle(cr, 0, 0, monitor->geometry.width, monitor->geometry.height); gdk_cairo_set_source_rgba(cr, &background->options.color); cairo_fill(cr); break; case BACKGROUND_TYPE_DEFAULT: break; case BACKGROUND_TYPE_SKIP: case BACKGROUND_TYPE_INVALID: default: g_return_if_reached(); } } static gboolean monitor_window_draw_cb(GtkWidget* widget, cairo_t* cr, const Monitor* monitor) { if(!monitor->background) return FALSE; if(monitor->transition.started) monitor->transition.config.draw(monitor, cr); else monitor_draw_background(monitor, monitor->background, cr); return FALSE; } static gboolean monitor_window_enter_notify_cb(GtkWidget* widget, GdkEventCrossing* event, const Monitor* monitor) { if(monitor->object->priv->active_monitor == monitor) { GdkWindow *gdkwindow = gtk_widget_get_window (widget); Window window = GDK_WINDOW_XID (gdkwindow); Display *display = GDK_WINDOW_XDISPLAY (gdkwindow); XEvent ev = {0}; static Atom wm_protocols = None; static Atom wm_take_focus = None; if (!wm_protocols) wm_protocols = XInternAtom(display, "WM_PROTOCOLS", False); if (!wm_take_focus) wm_take_focus = XInternAtom(display, "WM_TAKE_FOCUS", False); ev.xclient.type = ClientMessage; ev.xclient.window = window; ev.xclient.message_type = wm_protocols; ev.xclient.format = 32; ev.xclient.data.l[0] = wm_take_focus; ev.xclient.data.l[1] = CurrentTime; XSendEvent(display, window, False, 0L, &ev); } else if(monitor->object->priv->follow_cursor && greeter_background_monitor_enabled(monitor->object, monitor)) greeter_background_set_active_monitor(monitor->object, monitor); return FALSE; } static GdkPixbuf* scale_image_file(const gchar* path, ScalingMode mode, gint width, gint height, GHashTable* cache) { gchar* key = NULL; GdkPixbuf* pixbuf = NULL; if(cache) { key = g_strdup_printf("%s\n%d %dx%d", path, mode, width, height); if(g_hash_table_lookup_extended(cache, key, NULL, (gpointer*)&pixbuf)) { g_free(key); return GDK_PIXBUF(g_object_ref(pixbuf)); } } if(!cache || !g_hash_table_lookup_extended(cache, path, NULL, (gpointer*)&pixbuf)) { GError *error = NULL; pixbuf = gdk_pixbuf_new_from_file(path, &error); if(error) { g_warning("[Background] Failed to load background: %s", error->message); g_clear_error(&error); } else if(cache) g_hash_table_insert(cache, g_strdup(path), g_object_ref(pixbuf)); } else pixbuf = g_object_ref(pixbuf); if(pixbuf) { GdkPixbuf* scaled = scale_image(pixbuf, mode, width, height); if(cache) g_hash_table_insert(cache, g_strdup(key), g_object_ref(scaled)); g_object_unref(pixbuf); pixbuf = scaled; } g_free(key); return pixbuf; } static GdkPixbuf* scale_image(GdkPixbuf* source, ScalingMode mode, gint width, gint height) { if(mode == SCALING_MODE_ZOOMED) { gint offset_x = 0; gint offset_y = 0; gint p_width = gdk_pixbuf_get_width(source); gint p_height = gdk_pixbuf_get_height(source); gdouble scale_x = (gdouble)width / p_width; gdouble scale_y = (gdouble)height / p_height; GdkPixbuf *pixbuf; if(scale_x < scale_y) { scale_x = scale_y; offset_x = (width - (p_width * scale_x)) / 2; } else { scale_y = scale_x; offset_y = (height - (p_height * scale_y)) / 2; } pixbuf = gdk_pixbuf_new(GDK_COLORSPACE_RGB, TRUE, gdk_pixbuf_get_bits_per_sample (source), width, height); gdk_pixbuf_composite(source, pixbuf, 0, 0, width, height, offset_x, offset_y, scale_x, scale_y, GDK_INTERP_BILINEAR, 0xFF); return pixbuf; } else if(mode == SCALING_MODE_STRETCHED) { return gdk_pixbuf_scale_simple(source, width, height, GDK_INTERP_BILINEAR); } return GDK_PIXBUF(g_object_ref(source)); } /* The following code for setting a RetainPermanent background pixmap was taken originally from Gnome, with some fixes from MATE. see: https://github.com/mate-desktop/mate-desktop/blob/master/libmate-desktop/mate-bg.c */ static cairo_surface_t* create_root_surface(GdkScreen* screen) { gint number, width, height; Display *display; Pixmap pixmap; cairo_surface_t *surface; number = greeter_screen_get_number (screen); width = greeter_screen_get_width (screen); height = greeter_screen_get_height (screen); /* Open a new connection so with Retain Permanent so the pixmap remains when the greeter quits */ greeter_gdk_flush (); display = XOpenDisplay (gdk_display_get_name (gdk_screen_get_display (screen))); if (!display) { g_warning("[Background] Failed to create root pixmap"); return NULL; } XSetCloseDownMode (display, RetainPermanent); pixmap = XCreatePixmap (display, RootWindow (display, number), width, height, DefaultDepth (display, number)); XCloseDisplay (display); /* Convert into a Cairo surface */ surface = cairo_xlib_surface_create (GDK_SCREEN_XDISPLAY (screen), pixmap, GDK_VISUAL_XVISUAL (gdk_screen_get_system_visual (screen)), width, height); return surface; } /* Sets the "ESETROOT_PMAP_ID" property to later be used to free the pixmap */ static void set_root_pixmap_id(GdkScreen* screen, Display* display, Pixmap xpixmap) { Window xroot = RootWindow (display, greeter_screen_get_number (screen)); const char *atom_names[] = {"_XROOTPMAP_ID", "ESETROOT_PMAP_ID"}; Atom atoms[G_N_ELEMENTS(atom_names)] = {0}; Atom type; int format; unsigned long nitems, after; unsigned char *data_root, *data_esetroot; /* Get atoms for both properties in an array, only if they exist. * This method is to avoid multiple round-trips to Xserver */ if (XInternAtoms (display, (char **)atom_names, G_N_ELEMENTS(atom_names), True, atoms) && atoms[0] != None && atoms[1] != None) { XGetWindowProperty (display, xroot, atoms[0], 0L, 1L, False, AnyPropertyType, &type, &format, &nitems, &after, &data_root); if (data_root && type == XA_PIXMAP && format == 32 && nitems == 1) { XGetWindowProperty (display, xroot, atoms[1], 0L, 1L, False, AnyPropertyType, &type, &format, &nitems, &after, &data_esetroot); if (data_esetroot && type == XA_PIXMAP && format == 32 && nitems == 1) { Pixmap xrootpmap = *((Pixmap *) data_root); Pixmap esetrootpmap = *((Pixmap *) data_esetroot); XFree (data_root); XFree (data_esetroot); greeter_error_trap_push (); if (xrootpmap && xrootpmap == esetrootpmap) { XKillClient (display, xrootpmap); } if (esetrootpmap && esetrootpmap != xrootpmap) { XKillClient (display, esetrootpmap); } XSync (display, False); greeter_error_trap_pop_ignored (); } } } /* Get atoms for both properties in an array, create them if needed. * This method is to avoid multiple round-trips to Xserver */ if (!XInternAtoms (display, (char **)atom_names, G_N_ELEMENTS(atom_names), False, atoms) || atoms[0] == None || atoms[1] == None) { g_warning("[Background] Could not create atoms needed to set root pixmap id/properties.\n"); return; } /* Set new _XROOTMAP_ID and ESETROOT_PMAP_ID properties */ XChangeProperty (display, xroot, atoms[0], XA_PIXMAP, 32, PropModeReplace, (unsigned char *) &xpixmap, 1); XChangeProperty (display, xroot, atoms[1], XA_PIXMAP, 32, PropModeReplace, (unsigned char *) &xpixmap, 1); } /** * set_surface_as_root: * @screen: the #GdkScreen to change root background on * @surface: the #cairo_surface_t to set root background from. * Must be an xlib surface backing a pixmap. * * Set the root pixmap, and properties pointing to it. We * do this atomically with a server grab to make sure that * we won't leak the pixmap if somebody else it setting * it at the same time. (This assumes that they follow the * same conventions we do). @surface should come from a call * to create_root_surface(). **/ static void set_surface_as_root(GdkScreen* screen, cairo_surface_t* surface) { Display *display; Pixmap pixmap_id; Window xroot; g_return_if_fail(cairo_surface_get_type (surface) == CAIRO_SURFACE_TYPE_XLIB); /* Desktop background pixmap should be created from dummy X client since most * applications will try to kill it with XKillClient later when changing pixmap */ display = GDK_DISPLAY_XDISPLAY (gdk_screen_get_display (screen)); pixmap_id = cairo_xlib_surface_get_drawable (surface); xroot = RootWindow (display, greeter_screen_get_number(screen)); XGrabServer (display); XSetWindowBackgroundPixmap (display, xroot, pixmap_id); set_root_pixmap_id (screen, display, pixmap_id); XClearWindow (display, xroot); XFlush (display); XUngrabServer (display); } static gdouble transition_func_linear(gdouble x) { return x; } static gdouble transition_func_ease_in_out(gdouble x) { return (1 - cos(M_PI*x))/2; } lightdm-gtk-greeter-2.0.5/src/lightdm-gtk-greeter.glade0000664000175000017500000006704213251222134025017 0ustar00bluesabrebluesabre00000000000000 panel_window True False start menubar True False rtl power_menuitem True False True False power_accelgroup True False Suspend True False Hibernate True False Restart... False True False <Login>/power/shutdown Shut Down... a11y_menuitem True False True False a11y_accelgroup False True False <Login>/a11y/font Large Font False True False <Login>/a11y/contrast High Contrast False True False <Login>/a11y/keyboard On Screen Keyboard True False True False <Login>/a11y/reader Screen Reader True language_menuitem True False [language_code] True False session_menuitem True False True False layout_menuitem True False [layout] True False clock_menuitem False host_menuitem False 6 power_window False center center True False vertical content_frame True False True False 24 24 24 24 6 6 True False 6 12 6 6 gtk-missing-image 0 0 2 True False start 6 True [title] 1 0 True False start True [text] 1 1 False True 0 buttonbox_frame True False True False 24 24 24 24 6 end Cancel cancel_button True True False False True 0 OK power_ok_button True True False False True 1 False True 1 screen False True True True False False login_window True False start start login_box True False vertical content_frame True False 0 none True False 24 24 24 6 18 user_image_border True False center center 0 none user_image True False 80 avatar-default 0 0 3 user_combobox 200 False center 12 True user_liststore 1 2 1 0 prompt_entry True True • Enter your username 1 1 prompt_entry 200 True True 12 True False • False False Enter your password 1 2 True True 0 greeter_infobar False False end False False -1 False True False [message] True True 0 False True -1 False True 1 buttonbox_frame True False 0 none True False 24 24 24 Cancel cancel_button True True False False True 0 Log In login_button True True False False True end 1 False True 2 lightdm-gtk-greeter-2.0.5/src/greeterconfiguration.h0000664000175000017500000000641013252335734024555 0ustar00bluesabrebluesabre00000000000000/* * Copyright (C) 2015 - 2018, Sean Davis * * This program is free software: you can redistribute it and/or modify it under * the terms of the GNU General Public License as published by the Free Software * Foundation, either version 3 of the License, or (at your option) any later * version. See http://www.gnu.org/copyleft/gpl.html the full text of the * license. */ #ifndef GREETER_CONFIGURATION_H #define GREETER_CONFIGURATION_H #include #define CONFIG_GROUP_DEFAULT "greeter" #define CONFIG_KEY_INDICATORS "indicators" #define CONFIG_KEY_DEBUGGING "allow-debugging" #define CONFIG_KEY_SCREENSAVER_TIMEOUT "screensaver-timeout" #define CONFIG_KEY_THEME "theme-name" #define CONFIG_KEY_ICON_THEME "icon-theme-name" #define CONFIG_KEY_CURSOR_THEME "cursor-theme-name" #define CONFIG_KEY_CURSOR_THEME_SIZE "cursor-theme-size" #define CONFIG_KEY_FONT "font-name" #define CONFIG_KEY_DPI "xft-dpi" #define CONFIG_KEY_ANTIALIAS "xft-antialias" #define CONFIG_KEY_HINT_STYLE "xft-hintstyle" #define CONFIG_KEY_RGBA "xft-rgba" #define CONFIG_KEY_HIDE_USER_IMAGE "hide-user-image" #define CONFIG_KEY_DEFAULT_USER_IMAGE "default-user-image" #define CONFIG_KEY_KEYBOARD "keyboard" #define CONFIG_KEY_READER "reader" #define CONFIG_KEY_CLOCK_FORMAT "clock-format" #define CONFIG_KEY_ACTIVE_MONITOR "active-monitor" #define CONFIG_KEY_POSITION "position" #define CONFIG_KEY_PANEL_POSITION "panel-position" #define CONFIG_KEY_KEYBOARD_POSITION "keyboard-position" #define CONFIG_KEY_A11Y_STATES "a11y-states" #define CONFIG_KEY_AT_SPI_ENABLED "at-spi-enabled" #define CONFIG_GROUP_MONITOR "monitor:" #define CONFIG_KEY_BACKGROUND "background" #define CONFIG_KEY_USER_BACKGROUND "user-background" #define CONFIG_KEY_LAPTOP "laptop" #define CONFIG_KEY_T_TYPE "transition-type" #define CONFIG_KEY_T_DURATION "transition-duration" #define STATE_SECTION_GREETER "/greeter" #define STATE_SECTION_A11Y "/a11y-states" #define STATE_KEY_LAST_USER "last-user" #define STATE_KEY_LAST_SESSION "last-session" void config_init (void); gchar** config_get_groups (const gchar* prefix); gboolean config_has_key (const gchar* group, const gchar* key); gchar* config_get_string (const gchar* group, const gchar* key, const gchar* fallback); void config_set_string (const gchar* group, const gchar* key, const gchar* value); gchar** config_get_string_list (const gchar* group, const gchar* key, gchar** fallback); gint config_get_int (const gchar* group, const gchar* key, gint fallback); void config_set_int (const gchar* group, const gchar* key, gint value); gboolean config_get_bool (const gchar* group, const gchar* key, gboolean fallback); void config_set_bool (const gchar* group, const gchar* key, gboolean value); gint config_get_enum (const gchar* group, const gchar* key, gint fallback, const gchar* first_name, ...) G_GNUC_NULL_TERMINATED; #endif //GREETER_CONFIGURATION_H lightdm-gtk-greeter-2.0.5/src/greeterdeprecated.c0000664000175000017500000000530113252332762023775 0ustar00bluesabrebluesabre00000000000000/* * Copyright (C) 2017 - 2018, Sean Davis * * This program is free software: you can redistribute it and/or modify it under * the terms of the GNU General Public License as published by the Free Software * Foundation, either version 3 of the License, or (at your option) any later * version. See http://www.gnu.org/copyleft/gpl.html the full text of the * license. */ #include #include "greeterdeprecated.h" G_GNUC_BEGIN_IGNORE_DEPRECATIONS void greeter_gdk_flush (void) { /* Deprecated GTK ???? */ gdk_flush (); } void greeter_error_trap_push (void) { /* Deprecated GTK ???? */ gdk_error_trap_push (); } void greeter_error_trap_pop_ignored (void) { /* Deprecated GTK ???? */ gdk_error_trap_pop_ignored (); } gint greeter_screen_get_number (GdkScreen *screen) { /* Deprecated GTK 3.22 */ return gdk_screen_get_number (screen); } gint greeter_screen_get_width (GdkScreen *screen) { /* Deprecated GTK 3.22 */ return gdk_screen_get_width (screen); } gint greeter_screen_get_width_mm (GdkScreen *screen) { /* Deprecated GTK 3.22 */ return gdk_screen_get_width_mm (screen); } gint greeter_screen_get_height (GdkScreen *screen) { /* Deprecated GTK 3.22 */ return gdk_screen_get_height (screen); } gint greeter_screen_get_height_mm (GdkScreen *screen) { /* Deprecated GTK 3.22 */ return gdk_screen_get_height_mm (screen); } gint greeter_screen_get_n_monitors (GdkScreen *screen) { /* Deprecated GTK 3.22 */ return gdk_screen_get_n_monitors (screen); } gchar * greeter_screen_get_monitor_plug_name (GdkScreen *screen, gint monitor_num) { /* Deprecated GTK 3.22 */ return gdk_screen_get_monitor_plug_name (screen, monitor_num); } void greeter_screen_get_monitor_geometry (GdkScreen *screen, gint monitor_num, GdkRectangle *dest) { /* Deprecated GTK 3.22 */ return gdk_screen_get_monitor_geometry (screen, monitor_num, dest); } gint greeter_screen_get_primary_monitor (GdkScreen *screen) { /* Deprecated GTK 3.22 */ return gdk_screen_get_primary_monitor (screen); } void greeter_widget_reparent (GtkWidget *widget, GtkWidget *new_parent) { /* Deprecated GTK 3.14 */ return gtk_widget_reparent (widget, new_parent); } GdkDeviceManager * greeter_display_get_device_manager (GdkDisplay *display) { /* Deprecated GTK 3.20 */ return gdk_display_get_device_manager (display); } GdkDevice * greeter_device_manager_get_client_pointer (GdkDeviceManager *device_manager) { /* Deprecated GTK 3.20 */ return gdk_device_manager_get_client_pointer (device_manager); } G_GNUC_END_IGNORE_DEPRECATIONS lightdm-gtk-greeter-2.0.5/src/lightdm-gtk-greeter-application.css0000664000175000017500000000005313243241724027030 0ustar00bluesabrebluesabre00000000000000* { -GtkWidget-window-dragging: false; } lightdm-gtk-greeter-2.0.5/src/greeterdeprecated.h0000664000175000017500000000434113252333012023772 0ustar00bluesabrebluesabre00000000000000/* * Copyright (C) 2017 - 2018, Sean Davis * * This program is free software: you can redistribute it and/or modify it under * the terms of the GNU General Public License as published by the Free Software * Foundation, either version 3 of the License, or (at your option) any later * version. See http://www.gnu.org/copyleft/gpl.html the full text of the * license. */ #ifndef GREETER_DEPRECATED_H #define GREETER_DEPRECATED_H #include void greeter_gdk_flush (void); void greeter_error_trap_push (void); void greeter_error_trap_pop_ignored (void); gint greeter_screen_get_number (GdkScreen *screen); gint greeter_screen_get_width (GdkScreen *screen); gint greeter_screen_get_width_mm (GdkScreen *screen); gint greeter_screen_get_height (GdkScreen *screen); gint greeter_screen_get_height_mm (GdkScreen *screen); gint greeter_screen_get_n_monitors (GdkScreen *screen); gchar * greeter_screen_get_monitor_plug_name (GdkScreen *screen, gint monitor_num); void greeter_screen_get_monitor_geometry (GdkScreen *screen, gint monitor_num, GdkRectangle *dest); gint greeter_screen_get_primary_monitor (GdkScreen *screen); void greeter_widget_reparent (GtkWidget *widget, GtkWidget *new_parent); GdkDeviceManager * greeter_display_get_device_manager (GdkDisplay *display); GdkDevice * greeter_device_manager_get_client_pointer (GdkDeviceManager *device_manager); #endif //GREETER_DEPRECATED_H lightdm-gtk-greeter-2.0.5/src/greetermenubar.c0000664000175000017500000001716413252333033023330 0ustar00bluesabrebluesabre00000000000000/* * Copyright (C) 2014, Andrew P. * Copyright (C) 2017, Sean Davis * * This program is free software: you can redistribute it and/or modify it under * the terms of the GNU General Public License as published by the Free Software * Foundation, either version 3 of the License, or (at your option) any later * version. See http://www.gnu.org/copyleft/gpl.html the full text of the * license. */ #include #include "greetermenubar.h" static void greeter_menu_bar_size_allocate(GtkWidget* widget, GtkAllocation* allocation); G_DEFINE_TYPE(GreeterMenuBar, greeter_menu_bar, GTK_TYPE_MENU_BAR); static void greeter_menu_bar_class_init(GreeterMenuBarClass* klass) { GtkWidgetClass* widget_class = GTK_WIDGET_CLASS(klass); widget_class->size_allocate = greeter_menu_bar_size_allocate; } static void greeter_menu_bar_init(GreeterMenuBar* square) { } GtkWidget* greeter_menu_bar_new(void) { return GTK_WIDGET(g_object_new(greeter_menu_bar_get_type(), NULL)); } static gint sort_minimal_size(gconstpointer a, gconstpointer b, GtkRequestedSize* sizes) { gint a_size = sizes[GPOINTER_TO_INT(a)].natural_size; gint b_size = sizes[GPOINTER_TO_INT(b)].natural_size; return a_size == b_size ? 0 : a_size > b_size ? -1 : +1; } static void greeter_menu_bar_size_allocate(GtkWidget* widget, GtkAllocation* allocation) { GtkPackDirection pack_direction; GList *item; GList *shell_children; GList *expand_nums = NULL; guint visible_count = 0; guint expand_count = 0; g_return_if_fail(allocation != NULL); g_return_if_fail(GREETER_IS_MENU_BAR(widget)); gtk_widget_set_allocation(widget, allocation); pack_direction = gtk_menu_bar_get_pack_direction(GTK_MENU_BAR(widget)); g_return_if_fail(pack_direction == GTK_PACK_DIRECTION_LTR || pack_direction == GTK_PACK_DIRECTION_RTL); shell_children = gtk_container_get_children(GTK_CONTAINER(widget)); for(item = shell_children; item; item = g_list_next(item)) if(gtk_widget_get_visible(item->data)) { if(gtk_widget_compute_expand(item->data, GTK_ORIENTATION_HORIZONTAL)) { expand_nums = g_list_prepend(expand_nums, GINT_TO_POINTER(visible_count)); expand_count++; } visible_count++; } if(gtk_widget_get_realized(widget)) gdk_window_move_resize(gtk_widget_get_window(widget), allocation->x, allocation->y, allocation->width, allocation->height); if(visible_count > 0) { GtkAllocation remaining_space; GtkStyleContext* context = gtk_widget_get_style_context(widget); GtkStateFlags flags = gtk_widget_get_state_flags(widget); GtkRequestedSize* requested_sizes = g_newa(GtkRequestedSize, visible_count); guint border_width = gtk_container_get_border_width(GTK_CONTAINER(widget)); GtkShadowType shadow_type = GTK_SHADOW_OUT; GtkBorder border; gint toggle_size; GtkRequestedSize* request; gboolean ltr; int size; gtk_style_context_get_padding(context, flags, &border); gtk_widget_style_get(widget, "shadow-type", &shadow_type, NULL); remaining_space.x = (border_width + border.left); remaining_space.y = (border_width + border.top); remaining_space.width = allocation->width - 2 * border_width - border.left - border.right; remaining_space.height = allocation->height - 2 * border_width - border.top - border.bottom; if (shadow_type != GTK_SHADOW_NONE) { gtk_style_context_get_border(context, flags, &border); remaining_space.x += border.left; remaining_space.y += border.top; remaining_space.width -= border.left + border.right; remaining_space.height -= border.top + border.bottom; } request = requested_sizes; size = remaining_space.width; ltr = (gtk_widget_get_direction(widget) == GTK_TEXT_DIR_LTR) == (pack_direction == GTK_PACK_DIRECTION_LTR); for(item = shell_children; item; item = g_list_next(item)) { if (!gtk_widget_get_visible(item->data)) continue; request->data = item->data; gtk_widget_get_preferred_width_for_height(item->data, remaining_space.height, &request->minimum_size, &request->natural_size); gtk_menu_item_toggle_size_request(GTK_MENU_ITEM(item->data), &toggle_size); request->minimum_size += toggle_size; request->natural_size += toggle_size; gtk_menu_item_toggle_size_allocate(GTK_MENU_ITEM(item->data), toggle_size); size -= request->minimum_size; request++; } size = gtk_distribute_natural_allocation(size, visible_count, requested_sizes); /* Distribution extra space for widgets with expand=True */ if(size > 0 && expand_nums) { GList *first_item = NULL; gint needed_size = -1; gint max_size = 0; gint total_needed_size = 0; expand_nums = g_list_sort_with_data(expand_nums, (GCompareDataFunc)sort_minimal_size, requested_sizes); first_item = expand_nums; max_size = requested_sizes[GPOINTER_TO_INT(first_item->data)].natural_size; /* Free space that all widgets need to have the same (max_size) width * [___max_width___][widget ][widget____ ] * total_needed_size := [] + [ ] + [ ] * total_needed_size = [ ] */ for(item = g_list_next(expand_nums); item; item = g_list_next(item)) total_needed_size += max_size - requested_sizes[GPOINTER_TO_INT(item->data)].natural_size; while(first_item) { if(size >= total_needed_size) { /* total_needed_size is enough for all remaining widgets */ needed_size = max_size + (size - total_needed_size)/expand_count; break; } /* Removing current maximal widget from list */ total_needed_size -= max_size - requested_sizes[GPOINTER_TO_INT(first_item->data)].natural_size; first_item = g_list_next(first_item); if(first_item) max_size = requested_sizes[GPOINTER_TO_INT(first_item->data)].natural_size; } for(item = first_item; item; item = g_list_next(item)) { gint dsize = 0; request = &requested_sizes[GPOINTER_TO_INT(item->data)]; dsize = needed_size - request->natural_size; if(size < dsize) dsize = size; size -= dsize; request->natural_size += dsize; } } for(guint i = 0; i < visible_count; i++) { GtkAllocation child_allocation = remaining_space; request = &requested_sizes[i]; child_allocation.width = request->natural_size; remaining_space.width -= request->natural_size; if (ltr) remaining_space.x += request->natural_size; else child_allocation.x += remaining_space.width; gtk_widget_size_allocate(request->data, &child_allocation); } g_list_free(expand_nums); } g_list_free(shell_children); } lightdm-gtk-greeter-2.0.5/src/lightdm-gtk-greeter-fallback.css0000664000175000017500000000102413251222134026254 0ustar00bluesabrebluesabre00000000000000#layout_menuitem>GtkLabel { border: 1px solid alpha(@menu_fg_color, 0.8); border-radius: 0.5em; padding: 0px 0.25em; background: alpha(@menu_fg_color, 0.2); } #layout_menuitem { padding: 1px; } /* Make sure the GtkSeparatorMenuItems don't alter the overall panel/menubar background */ #panel_window menubar > separator { background: transparent; } /* Workaround for Adwaita - and other themes - setting a smaller font for the keycap window */ #login_window.keycap, #power_window.keycap { font-size: initial; } lightdm-gtk-greeter-2.0.5/src/Makefile.in0000664000175000017500000011045313253544551022227 0ustar00bluesabrebluesabre00000000000000# Makefile.in generated by automake 1.15.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2017 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # # Copyright (C) 2010 - 2011, Robert Ancell # Copyright (C) 2012 - 2013, Lionel Le Folgoc # Copyright (C) 2013 - 2018, Sean Davis # Copyright (C) 2014, Andrew P. # Copyright (C) 2015, Simon Steinbeiß # # This program is free software: you can redistribute it and/or modify it under # the terms of the GNU General Public License as published by the Free Software # Foundation, either version 3 of the License, or (at your option) any later # version. See http://www.gnu.org/copyleft/gpl.html the full text of the # license. # VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ sbin_PROGRAMS = lightdm-gtk-greeter$(EXEEXT) subdir = src ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ $(top_srcdir)/m4/introspection.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(sbindir)" PROGRAMS = $(sbin_PROGRAMS) am__objects_1 = am_lightdm_gtk_greeter_OBJECTS = $(am__objects_1) \ lightdm_gtk_greeter-lightdm-gtk-greeter.$(OBJEXT) \ lightdm_gtk_greeter-greeterbackground.$(OBJEXT) \ lightdm_gtk_greeter-greeterconfiguration.$(OBJEXT) \ lightdm_gtk_greeter-greetermenubar.$(OBJEXT) \ lightdm_gtk_greeter-greeterdeprecated.$(OBJEXT) lightdm_gtk_greeter_OBJECTS = $(am_lightdm_gtk_greeter_OBJECTS) am__DEPENDENCIES_1 = lightdm_gtk_greeter_DEPENDENCIES = $(am__DEPENDENCIES_1) \ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) am__v_lt_0 = --silent am__v_lt_1 = lightdm_gtk_greeter_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \ $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) AM_V_CC = $(am__v_CC_@AM_V@) am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) am__v_CC_0 = @echo " CC " $@; am__v_CC_1 = CCLD = $(CC) LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CCLD = $(am__v_CCLD_@AM_V@) am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) am__v_CCLD_0 = @echo " CCLD " $@; am__v_CCLD_1 = SOURCES = $(lightdm_gtk_greeter_SOURCES) DIST_SOURCES = $(lightdm_gtk_greeter_SOURCES) am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMODULE_CFLAGS = @GMODULE_CFLAGS@ GMODULE_LIBS = @GMODULE_LIBS@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ HAVE_EXO_CSOURCE = @HAVE_EXO_CSOURCE@ INDICATORDIR = @INDICATORDIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBIDO_CFLAGS = @LIBIDO_CFLAGS@ LIBIDO_LIBS = @LIBIDO_LIBS@ LIBINDICATOR_CFLAGS = @LIBINDICATOR_CFLAGS@ LIBINDICATOR_LIBS = @LIBINDICATOR_LIBS@ LIBINTL = @LIBINTL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIBX11_CFLAGS = @LIBX11_CFLAGS@ LIBX11_LIBS = @LIBX11_LIBS@ LIBXKLAVIER_CFLAGS = @LIBXKLAVIER_CFLAGS@ LIBXKLAVIER_LIBS = @LIBXKLAVIER_LIBS@ LIGHTDMGOBJECT_CFLAGS = @LIGHTDMGOBJECT_CFLAGS@ LIGHTDMGOBJECT_LIBS = @LIGHTDMGOBJECT_LIBS@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POSUB = @POSUB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ UNITY_INDICATORDIR = @UNITY_INDICATORDIR@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ lightdm_gtk_greeter_built_sources = \ lightdm-gtk-greeter-ui.h \ lightdm-gtk-greeter-css-fallback.h \ lightdm-gtk-greeter-css-application.h lightdm_gtk_greeter_SOURCES = \ $(lightdm_gtk_greeter_built_sources) \ lightdm-gtk-greeter.c \ greeterbackground.c \ greeterbackground.h \ greeterconfiguration.c \ greeterconfiguration.h \ greetermenubar.c \ greetermenubar.h \ greeterdeprecated.c \ greeterdeprecated.h AM_CPPFLAGS = \ -I$(top_srcdir) \ -DHAVE_CONFIG_H \ -DGETTEXT_PACKAGE=\"$(GETTEXT_PACKAGE)\" \ -DLOCALEDIR=\""$(localedir)"\" \ -DGREETER_DATA_DIR=\""$(datadir)/lightdm-gtk-greeter"\" \ -DCONFIG_FILE=\""$(sysconfdir)/lightdm/lightdm-gtk-greeter.conf"\" \ -DINDICATOR_DIR=\""$(INDICATORDIR)"\" \ -DUNITY_INDICATOR_DIR=\""$(UNITY_INDICATORDIR)"\" \ $(WARN_CFLAGS) lightdm_gtk_greeter_CFLAGS = \ $(GTK_CFLAGS) \ $(GMODULE_CFLAGS) \ $(GTHREAD_CFLAGS) \ $(LIGHTDMGOBJECT_CFLAGS) \ $(LIBX11_CFLAGS) \ $(LIBINDICATOR_CFLAGS) \ $(LIBIDO_CFLAGS) lightdm_gtk_greeter_LDADD = \ $(GTK_LIBS) \ $(GMODULE_LIBS) \ $(GTHREAD_LIBS) \ $(LIGHTDMGOBJECT_LIBS) \ $(LIBX11_LIBS) \ $(LIBINDICATOR_LIBS) \ $(LIBIDO_LIBS) \ $(LIBXKLAVIER_LIBS)\ -lm @MAINTAINER_MODE_TRUE@DISTCLEANFILES = \ @MAINTAINER_MODE_TRUE@ $(lightdm_gtk_greeter_built_sources) @MAINTAINER_MODE_TRUE@BUILT_SOURCES = \ @MAINTAINER_MODE_TRUE@ $(lightdm_gtk_greeter_built_sources) EXTRA_DIST = \ lightdm-gtk-greeter.glade \ lightdm-gtk-greeter-fallback.css \ lightdm-gtk-greeter-application.css all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign src/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-sbinPROGRAMS: $(sbin_PROGRAMS) @$(NORMAL_INSTALL) @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \ $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \ fi; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p \ || test -f $$p1 \ ; then echo "$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n;h' \ -e 's|.*|.|' \ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) files[d] = files[d] " " $$1; \ else { print "f", $$3 "/" $$4, $$1; } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \ } \ ; done uninstall-sbinPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ -e 's/$$/$(EXEEXT)/' \ `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(sbindir)" && rm -f $$files clean-sbinPROGRAMS: @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list lightdm-gtk-greeter$(EXEEXT): $(lightdm_gtk_greeter_OBJECTS) $(lightdm_gtk_greeter_DEPENDENCIES) $(EXTRA_lightdm_gtk_greeter_DEPENDENCIES) @rm -f lightdm-gtk-greeter$(EXEEXT) $(AM_V_CCLD)$(lightdm_gtk_greeter_LINK) $(lightdm_gtk_greeter_OBJECTS) $(lightdm_gtk_greeter_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lightdm_gtk_greeter-greeterbackground.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lightdm_gtk_greeter-greeterconfiguration.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lightdm_gtk_greeter-greeterdeprecated.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lightdm_gtk_greeter-greetermenubar.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lightdm_gtk_greeter-lightdm-gtk-greeter.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< .c.obj: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< lightdm_gtk_greeter-lightdm-gtk-greeter.o: lightdm-gtk-greeter.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -MT lightdm_gtk_greeter-lightdm-gtk-greeter.o -MD -MP -MF $(DEPDIR)/lightdm_gtk_greeter-lightdm-gtk-greeter.Tpo -c -o lightdm_gtk_greeter-lightdm-gtk-greeter.o `test -f 'lightdm-gtk-greeter.c' || echo '$(srcdir)/'`lightdm-gtk-greeter.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lightdm_gtk_greeter-lightdm-gtk-greeter.Tpo $(DEPDIR)/lightdm_gtk_greeter-lightdm-gtk-greeter.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='lightdm-gtk-greeter.c' object='lightdm_gtk_greeter-lightdm-gtk-greeter.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -c -o lightdm_gtk_greeter-lightdm-gtk-greeter.o `test -f 'lightdm-gtk-greeter.c' || echo '$(srcdir)/'`lightdm-gtk-greeter.c lightdm_gtk_greeter-lightdm-gtk-greeter.obj: lightdm-gtk-greeter.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -MT lightdm_gtk_greeter-lightdm-gtk-greeter.obj -MD -MP -MF $(DEPDIR)/lightdm_gtk_greeter-lightdm-gtk-greeter.Tpo -c -o lightdm_gtk_greeter-lightdm-gtk-greeter.obj `if test -f 'lightdm-gtk-greeter.c'; then $(CYGPATH_W) 'lightdm-gtk-greeter.c'; else $(CYGPATH_W) '$(srcdir)/lightdm-gtk-greeter.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lightdm_gtk_greeter-lightdm-gtk-greeter.Tpo $(DEPDIR)/lightdm_gtk_greeter-lightdm-gtk-greeter.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='lightdm-gtk-greeter.c' object='lightdm_gtk_greeter-lightdm-gtk-greeter.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -c -o lightdm_gtk_greeter-lightdm-gtk-greeter.obj `if test -f 'lightdm-gtk-greeter.c'; then $(CYGPATH_W) 'lightdm-gtk-greeter.c'; else $(CYGPATH_W) '$(srcdir)/lightdm-gtk-greeter.c'; fi` lightdm_gtk_greeter-greeterbackground.o: greeterbackground.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -MT lightdm_gtk_greeter-greeterbackground.o -MD -MP -MF $(DEPDIR)/lightdm_gtk_greeter-greeterbackground.Tpo -c -o lightdm_gtk_greeter-greeterbackground.o `test -f 'greeterbackground.c' || echo '$(srcdir)/'`greeterbackground.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lightdm_gtk_greeter-greeterbackground.Tpo $(DEPDIR)/lightdm_gtk_greeter-greeterbackground.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='greeterbackground.c' object='lightdm_gtk_greeter-greeterbackground.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -c -o lightdm_gtk_greeter-greeterbackground.o `test -f 'greeterbackground.c' || echo '$(srcdir)/'`greeterbackground.c lightdm_gtk_greeter-greeterbackground.obj: greeterbackground.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -MT lightdm_gtk_greeter-greeterbackground.obj -MD -MP -MF $(DEPDIR)/lightdm_gtk_greeter-greeterbackground.Tpo -c -o lightdm_gtk_greeter-greeterbackground.obj `if test -f 'greeterbackground.c'; then $(CYGPATH_W) 'greeterbackground.c'; else $(CYGPATH_W) '$(srcdir)/greeterbackground.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lightdm_gtk_greeter-greeterbackground.Tpo $(DEPDIR)/lightdm_gtk_greeter-greeterbackground.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='greeterbackground.c' object='lightdm_gtk_greeter-greeterbackground.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -c -o lightdm_gtk_greeter-greeterbackground.obj `if test -f 'greeterbackground.c'; then $(CYGPATH_W) 'greeterbackground.c'; else $(CYGPATH_W) '$(srcdir)/greeterbackground.c'; fi` lightdm_gtk_greeter-greeterconfiguration.o: greeterconfiguration.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -MT lightdm_gtk_greeter-greeterconfiguration.o -MD -MP -MF $(DEPDIR)/lightdm_gtk_greeter-greeterconfiguration.Tpo -c -o lightdm_gtk_greeter-greeterconfiguration.o `test -f 'greeterconfiguration.c' || echo '$(srcdir)/'`greeterconfiguration.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lightdm_gtk_greeter-greeterconfiguration.Tpo $(DEPDIR)/lightdm_gtk_greeter-greeterconfiguration.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='greeterconfiguration.c' object='lightdm_gtk_greeter-greeterconfiguration.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -c -o lightdm_gtk_greeter-greeterconfiguration.o `test -f 'greeterconfiguration.c' || echo '$(srcdir)/'`greeterconfiguration.c lightdm_gtk_greeter-greeterconfiguration.obj: greeterconfiguration.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -MT lightdm_gtk_greeter-greeterconfiguration.obj -MD -MP -MF $(DEPDIR)/lightdm_gtk_greeter-greeterconfiguration.Tpo -c -o lightdm_gtk_greeter-greeterconfiguration.obj `if test -f 'greeterconfiguration.c'; then $(CYGPATH_W) 'greeterconfiguration.c'; else $(CYGPATH_W) '$(srcdir)/greeterconfiguration.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lightdm_gtk_greeter-greeterconfiguration.Tpo $(DEPDIR)/lightdm_gtk_greeter-greeterconfiguration.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='greeterconfiguration.c' object='lightdm_gtk_greeter-greeterconfiguration.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -c -o lightdm_gtk_greeter-greeterconfiguration.obj `if test -f 'greeterconfiguration.c'; then $(CYGPATH_W) 'greeterconfiguration.c'; else $(CYGPATH_W) '$(srcdir)/greeterconfiguration.c'; fi` lightdm_gtk_greeter-greetermenubar.o: greetermenubar.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -MT lightdm_gtk_greeter-greetermenubar.o -MD -MP -MF $(DEPDIR)/lightdm_gtk_greeter-greetermenubar.Tpo -c -o lightdm_gtk_greeter-greetermenubar.o `test -f 'greetermenubar.c' || echo '$(srcdir)/'`greetermenubar.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lightdm_gtk_greeter-greetermenubar.Tpo $(DEPDIR)/lightdm_gtk_greeter-greetermenubar.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='greetermenubar.c' object='lightdm_gtk_greeter-greetermenubar.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -c -o lightdm_gtk_greeter-greetermenubar.o `test -f 'greetermenubar.c' || echo '$(srcdir)/'`greetermenubar.c lightdm_gtk_greeter-greetermenubar.obj: greetermenubar.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -MT lightdm_gtk_greeter-greetermenubar.obj -MD -MP -MF $(DEPDIR)/lightdm_gtk_greeter-greetermenubar.Tpo -c -o lightdm_gtk_greeter-greetermenubar.obj `if test -f 'greetermenubar.c'; then $(CYGPATH_W) 'greetermenubar.c'; else $(CYGPATH_W) '$(srcdir)/greetermenubar.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lightdm_gtk_greeter-greetermenubar.Tpo $(DEPDIR)/lightdm_gtk_greeter-greetermenubar.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='greetermenubar.c' object='lightdm_gtk_greeter-greetermenubar.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -c -o lightdm_gtk_greeter-greetermenubar.obj `if test -f 'greetermenubar.c'; then $(CYGPATH_W) 'greetermenubar.c'; else $(CYGPATH_W) '$(srcdir)/greetermenubar.c'; fi` lightdm_gtk_greeter-greeterdeprecated.o: greeterdeprecated.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -MT lightdm_gtk_greeter-greeterdeprecated.o -MD -MP -MF $(DEPDIR)/lightdm_gtk_greeter-greeterdeprecated.Tpo -c -o lightdm_gtk_greeter-greeterdeprecated.o `test -f 'greeterdeprecated.c' || echo '$(srcdir)/'`greeterdeprecated.c @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lightdm_gtk_greeter-greeterdeprecated.Tpo $(DEPDIR)/lightdm_gtk_greeter-greeterdeprecated.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='greeterdeprecated.c' object='lightdm_gtk_greeter-greeterdeprecated.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -c -o lightdm_gtk_greeter-greeterdeprecated.o `test -f 'greeterdeprecated.c' || echo '$(srcdir)/'`greeterdeprecated.c lightdm_gtk_greeter-greeterdeprecated.obj: greeterdeprecated.c @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -MT lightdm_gtk_greeter-greeterdeprecated.obj -MD -MP -MF $(DEPDIR)/lightdm_gtk_greeter-greeterdeprecated.Tpo -c -o lightdm_gtk_greeter-greeterdeprecated.obj `if test -f 'greeterdeprecated.c'; then $(CYGPATH_W) 'greeterdeprecated.c'; else $(CYGPATH_W) '$(srcdir)/greeterdeprecated.c'; fi` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lightdm_gtk_greeter-greeterdeprecated.Tpo $(DEPDIR)/lightdm_gtk_greeter-greeterdeprecated.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='greeterdeprecated.c' object='lightdm_gtk_greeter-greeterdeprecated.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lightdm_gtk_greeter_CFLAGS) $(CFLAGS) -c -o lightdm_gtk_greeter-greeterdeprecated.obj `if test -f 'greeterdeprecated.c'; then $(CYGPATH_W) 'greeterdeprecated.c'; else $(CYGPATH_W) '$(srcdir)/greeterdeprecated.c'; fi` mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-am TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-am CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-am cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-am all-am: Makefile $(PROGRAMS) installdirs: for dir in "$(DESTDIR)$(sbindir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) clean: clean-am clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \ mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-sbinPROGRAMS install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-sbinPROGRAMS .MAKE: all check install install-am install-strip .PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ clean-libtool clean-sbinPROGRAMS cscopelist-am ctags ctags-am \ distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-sbinPROGRAMS install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-am uninstall uninstall-am uninstall-sbinPROGRAMS .PRECIOUS: Makefile @MAINTAINER_MODE_TRUE@lightdm-gtk-greeter-ui.h: $(srcdir)/lightdm-gtk-greeter.glade Makefile @MAINTAINER_MODE_TRUE@ $(AM_V_GEN) exo-csource --static --strip-comments --strip-content --name=lightdm_gtk_greeter_ui $< >$@ @MAINTAINER_MODE_TRUE@lightdm-gtk-greeter-css-fallback.h: $(srcdir)/lightdm-gtk-greeter-fallback.css Makefile @MAINTAINER_MODE_TRUE@ $(AM_V_GEN) exo-csource --static --name=lightdm_gtk_greeter_css_fallback $< >$@ @MAINTAINER_MODE_TRUE@lightdm-gtk-greeter-css-application.h: $(srcdir)/lightdm-gtk-greeter-application.css Makefile @MAINTAINER_MODE_TRUE@ $(AM_V_GEN) exo-csource --static --name=lightdm_gtk_greeter_css_application $< >$@ -include $(top_srcdir)/git.mk # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: lightdm-gtk-greeter-2.0.5/src/lightdm-gtk-greeter-css-application.h0000664000175000017500000000071413253544623027266 0ustar00bluesabrebluesabre00000000000000/* automatically generated from lightdm-gtk-greeter-application.css */ #ifdef __SUNPRO_C #pragma align 4 (lightdm_gtk_greeter_css_application) #endif #ifdef __GNUC__ static const char lightdm_gtk_greeter_css_application[] __attribute__ ((__aligned__ (4))) = #else static const char lightdm_gtk_greeter_css_application[] = #endif { "*\n{\n -GtkWidget-window-dragging: false;\n}\n" }; static const unsigned lightdm_gtk_greeter_css_application_length = 43u; lightdm-gtk-greeter-2.0.5/src/lightdm-gtk-greeter.c0000664000175000017500000034224113252336363024175 0ustar00bluesabrebluesabre00000000000000/* * Copyright (C) 2010 - 2011, Robert Ancell * Copyright (C) 2011, Gunnar Hjalmarsson * Copyright (C) 2012 - 2013, Lionel Le Folgoc * Copyright (C) 2012, Julien Lavergne * Copyright (C) 2013 - 2015, Simon Steinbeiß * Copyright (C) 2013 - 2018, Sean Davis * Copyright (C) 2014, Andrew P. * * This program is free software: you can redistribute it and/or modify it under * the terms of the GNU General Public License as published by the Free Software * Foundation, either version 3 of the License, or (at your option) any later * version. See http://www.gnu.org/copyleft/gpl.html the full text of the * license. */ #ifdef HAVE_CONFIG_H #include #endif #ifdef HAVE_STDLIB_H #include #endif #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_LIBINDICATOR #include #ifdef HAVE_LIBINDICATOR_NG #include #endif #endif #ifdef HAVE_LIBIDO /* Some indicators need ido library */ #include #endif #ifdef HAVE_LIBXKLAVIER #include #endif #include #include "src/greeterconfiguration.h" #include "src/greetermenubar.h" #include "src/greeterbackground.h" #include "src/lightdm-gtk-greeter-ui.h" #include "src/lightdm-gtk-greeter-css-fallback.h" #include "src/lightdm-gtk-greeter-css-application.h" static LightDMGreeter *greeter; /* List of spawned processes */ static GSList *pids_to_close = NULL; static GPid spawn_argv_pid (gchar **argv, GSpawnFlags flags, gint *pfd, GError **perror); #if defined(AT_SPI_COMMAND) || defined(INDICATOR_SERVICES_COMMAND) static GPid spawn_line_pid (const gchar *line, GSpawnFlags flags, GError **perror); #endif static void close_pid (GPid pid, gboolean remove); static void sigterm_cb (gpointer user_data); /* Screen window */ static GtkOverlay *screen_overlay; static GtkWidget *screen_overlay_child; /* Login window */ static GtkWidget *login_window; static GtkImage *user_image; static GtkComboBox *user_combo; static GtkEntry *username_entry, *password_entry; static GtkLabel *message_label; static GtkInfoBar *info_bar; static GtkButton *cancel_button, *login_button; /* Panel */ static GtkWidget *panel_window, *menubar; static GtkWidget *power_menuitem, *session_menuitem, *language_menuitem, *a11y_menuitem, *layout_menuitem, *clock_menuitem, *host_menuitem; static GtkWidget *suspend_menuitem, *hibernate_menuitem, *restart_menuitem, *shutdown_menuitem; static GtkWidget *contrast_menuitem, *font_menuitem, *keyboard_menuitem, *reader_menuitem; static GtkWidget *clock_label, *session_badge; static GtkMenu *session_menu, *language_menu, *layout_menu; /* Power window */ static GtkWidget *power_window; static GtkButton *power_ok_button, *power_cancel_button; static GtkLabel *power_title, *power_text; static GtkImage *power_icon; static const gchar *DEFAULT_LAYOUT[] = {"~spacer", "~spacer", "~host", "~spacer", "~session", "~a11y", "~clock", "~power", NULL}; static const gchar *POWER_WINDOW_DATA_LOOP = "power-window-loop"; /* */ static const gchar *POWER_WINDOW_DATA_RESPONSE = "power-window-response"; /* */ static gboolean show_power_prompt (const gchar *action, const gchar* icon, const gchar* title, const gchar* message); void power_button_clicked_cb (GtkButton *button, gpointer user_data); gboolean power_window_key_press_event_cb (GtkWidget *widget, GdkEventKey *event, gpointer user_data); /* Handling window position */ typedef struct { gint value; /* +0 and -0 */ gint sign; /* interpret 'value' as percentage of screen width/height */ gboolean percentage; /* -1: left/top, 0: center, +1: right,bottom */ gint anchor; } DimensionPosition; typedef struct { DimensionPosition x, y; /* Flag to use width and height fileds */ gboolean use_size; DimensionPosition width, height; } WindowPosition; static WindowPosition* str_to_position (const gchar *str, const WindowPosition *default_value); /* Function translate user defined coordinates to absolute value */ static gint get_absolute_position (const DimensionPosition *p, gint screen, gint window); gboolean screen_overlay_get_child_position_cb (GtkWidget *overlay, GtkWidget *widget, GdkRectangle *allocation, gpointer user_data); static const gchar *WINDOW_DATA_POSITION = "window-position"; /* */ /* Some default positions */ static const WindowPosition WINDOW_POS_CENTER = {.x = { 50, +1, TRUE, 0}, .y = { 50, +1, TRUE, 0}, .use_size = FALSE}; static const WindowPosition KEYBOARD_POSITION = {.x = { 50, +1, TRUE, 0}, .y = { 0, -1, FALSE, +1}, .use_size = TRUE, .width = {50, 0, TRUE, 0}, .height = {25, 0, TRUE, 0}}; /* Clock */ static gchar *clock_format; static gboolean clock_timeout_thread (void); /* Message label */ static gboolean message_label_is_empty (void); static void set_message_label (LightDMMessageType type, const gchar *text); /* User image */ static GdkPixbuf *default_user_pixbuf = NULL; static gchar *default_user_icon = NULL; static void set_user_image (const gchar *username); /* External command (keyboard, reader) */ typedef struct { const gchar *name; gchar **argv; gint argc; GPid pid; GtkWidget *menu_item; GtkWidget *widget; } MenuCommand; static MenuCommand *menu_command_parse (const gchar *name, const gchar *value, GtkWidget *menu_item); static MenuCommand *menu_command_parse_extended (const gchar *name, const gchar *value, GtkWidget *menu_item, const gchar *xid_app, const gchar *xid_arg); static gboolean menu_command_run (MenuCommand *command); static gboolean menu_command_stop (MenuCommand *command); static void menu_command_terminated_cb (GPid pid, gint status, MenuCommand *command); static MenuCommand *a11y_keyboard_command; static MenuCommand *a11y_reader_command; static void a11y_menuitem_toggled_cb (GtkCheckMenuItem *item, const gchar* name); /* Session */ static gchar *current_session; static gboolean is_valid_session (GList* items, const gchar* session); static gchar* get_session (void); static void set_session (const gchar *session); void session_selected_cb (GtkMenuItem *menuitem, gpointer user_data); /* Sesion language */ static gchar *current_language; static gchar* get_language (void); static void set_language (const gchar *language); void language_selected_cb (GtkMenuItem *menuitem, gpointer user_data); /* Screensaver values */ static int timeout, interval, prefer_blanking, allow_exposures; /* Handling monitors backgrounds */ static const gint USER_BACKGROUND_DELAY = 250; static GreeterBackground *greeter_background; /* Authentication state */ static gboolean cancelling = FALSE, prompted = FALSE; static gboolean prompt_active = FALSE, password_prompted = FALSE; /* Pending questions */ static GSList *pending_questions = NULL; typedef struct { gboolean is_prompt; union { LightDMMessageType message; LightDMPromptType prompt; } type; gchar *text; } PAMConversationMessage; static void pam_message_finalize (PAMConversationMessage *message); static void process_prompts (LightDMGreeter *greeter); static void show_prompt_cb (LightDMGreeter *greeter, const gchar *text, LightDMPromptType type); /* Panel and indicators */ typedef enum { PANEL_ITEM_INDICATOR, PANEL_ITEM_SPACER, PANEL_ITEM_SEPARATOR, PANEL_ITEM_TEXT } GreeterPanelItemType; static const gchar *PANEL_ITEM_STYLE = "panel-item"; static const gchar *PANEL_ITEM_STYLE_HOVERED = "panel-item-hovered"; static const gchar *PANEL_ITEM_STYLES[] = { "panel-item-indicator", "panel-item-spacer", "panel-item-separator", "panel-item-text" }; static const gchar *PANEL_ITEM_DATA_INDEX = "panel-item-data-index"; #ifdef HAVE_LIBINDICATOR static const gchar *INDICATOR_ITEM_DATA_OBJECT = "indicator-item-data-object"; /* */ static const gchar *INDICATOR_ITEM_DATA_ENTRY = "indicator-item-data-entry"; /* */ static const gchar *INDICATOR_ITEM_DATA_BOX = "indicator-item-data-box"; /* */ static const gchar *INDICATOR_DATA_MENUITEMS = "indicator-data-menuitems"; /* */ #endif static const gchar *LANGUAGE_DATA_CODE = "language-code"; /* e.g. "de_DE.UTF-8" */ static const gchar *SESSION_DATA_KEY = "session-key"; /* session name */ /* Layout indicator */ #ifdef HAVE_LIBXKLAVIER static XklEngine *xkl_engine; static const gchar *LAYOUT_DATA_GROUP = "layout-group"; /* */ #else static const gchar *LAYOUT_DATA_NAME = "layout-name"; /* */ #endif static const gchar *LAYOUT_DATA_LABEL = "layout-label"; /* e.g. "English (US)" */ static gboolean panel_item_enter_notify_cb (GtkWidget *widget, GdkEvent *event, gpointer enter); static void panel_add_item (GtkWidget *widget, gint index, GreeterPanelItemType item_type); static gboolean menu_item_accel_closure_cb (GtkAccelGroup *accel_group, GObject *acceleratable, guint keyval, GdkModifierType modifier, gpointer data); /* Maybe unnecessary (in future) trick to enable accelerators for hidden/detached menu items */ static void reassign_menu_item_accel (GtkWidget *item); static void init_indicators (void); static void layout_selected_cb (GtkCheckMenuItem *menuitem, gpointer user_data); static void update_layouts_menu (void); static void update_layouts_menu_state (void); #ifdef HAVE_LIBXKLAVIER static void xkl_state_changed_cb (XklEngine *engine, XklEngineStateChange change, gint group, gboolean restore, gpointer user_data); static void xkl_config_changed_cb (XklEngine *engine, gpointer user_data); static GdkFilterReturn xkl_xevent_filter (GdkXEvent *xev, GdkEvent *event, gpointer data); #endif /* a11y indicator */ static gchar *default_font_name, *default_theme_name, *default_icon_theme_name, *default_cursor_theme_name; void a11y_font_cb (GtkCheckMenuItem *item); void a11y_contrast_cb (GtkCheckMenuItem *item); void a11y_keyboard_cb (GtkCheckMenuItem *item, gpointer user_data); void a11y_reader_cb (GtkCheckMenuItem *item, gpointer user_data); /* Power indicator */ static void power_menu_cb (GtkWidget *menuitem, gpointer userdata); void suspend_cb (GtkWidget *widget, LightDMGreeter *greeter); void hibernate_cb (GtkWidget *widget, LightDMGreeter *greeter); void restart_cb (GtkWidget *widget, LightDMGreeter *greeter); void shutdown_cb (GtkWidget *widget, LightDMGreeter *greeter); static void read_monitor_configuration (const gchar *group, const gchar *name); struct SavedFocusData { GtkWidget *widget; gint editable_pos; }; gpointer greeter_save_focus(GtkWidget* widget); void greeter_restore_focus(const gpointer saved_data); static void read_monitor_configuration (const gchar *group, const gchar *name) { gchar *background; g_debug ("[Configuration] Monitor configuration found: '%s'", name); background = config_get_string (group, CONFIG_KEY_BACKGROUND, NULL); greeter_background_set_monitor_config (greeter_background, name, background, config_get_bool (group, CONFIG_KEY_USER_BACKGROUND, -1), config_get_bool (group, CONFIG_KEY_LAPTOP, -1), config_get_int (group, CONFIG_KEY_T_DURATION, -1), config_get_enum (group, CONFIG_KEY_T_TYPE, TRANSITION_TYPE_FALLBACK, "none", TRANSITION_TYPE_NONE, "linear", TRANSITION_TYPE_LINEAR, "ease-in-out", TRANSITION_TYPE_EASE_IN_OUT, NULL)); g_free (background); } gpointer greeter_save_focus(GtkWidget* widget) { GtkWidget *window; struct SavedFocusData *data; window = gtk_widget_get_toplevel(widget); if (!GTK_IS_WINDOW (window)) return NULL; data = g_new0 (struct SavedFocusData, 1); data->widget = gtk_window_get_focus (GTK_WINDOW (window)); data->editable_pos = GTK_IS_EDITABLE(data->widget) ? gtk_editable_get_position (GTK_EDITABLE (data->widget)) : -1; return data; } void greeter_restore_focus(const gpointer saved_data) { struct SavedFocusData *data = saved_data; if (!saved_data || !GTK_IS_WIDGET (data->widget)) return; gtk_widget_grab_focus (data->widget); if (GTK_IS_EDITABLE(data->widget) && data->editable_pos > -1) gtk_editable_set_position(GTK_EDITABLE(data->widget), data->editable_pos); } static void infobar_revealed_cb_710888 (GObject *gobject, GParamSpec *pspec, gpointer user_data) { gtk_widget_set_visible (GTK_WIDGET (info_bar), !message_label_is_empty ()); } /* Terminating */ static GPid spawn_argv_pid (gchar **argv, GSpawnFlags flags, gint *pfd, GError **perror) { GPid pid = 0; GError *error = NULL; gboolean spawned = FALSE; if (pfd) spawned = g_spawn_async_with_pipes (NULL, argv, NULL, flags, NULL, NULL, &pid, NULL, pfd, NULL, perror); else spawned = g_spawn_async (NULL, argv, NULL, flags, NULL, NULL, &pid, &error); if (spawned) { pids_to_close = g_slist_prepend (pids_to_close, GINT_TO_POINTER (pid)); g_debug ("[PIDs] Command executed (#%d): %s", pid, argv[0]); } else if (perror) { *perror = error; } else { g_warning ("[PIDs] Failed to execute command: %s", argv[0]); g_clear_error (&error); } return pid; } #if defined(AT_SPI_COMMAND) || defined(INDICATOR_SERVICES_COMMAND) static GPid spawn_line_pid (const gchar *line, GSpawnFlags flags, GError **perror) { gint argc = 0; gchar **argv = NULL; GError *error = NULL; if (g_shell_parse_argv (line, &argc, &argv, &error)) { GPid pid = spawn_argv_pid (argv, flags, NULL, perror); g_strfreev (argv); return pid; } else if (!perror && error) { g_warning ("[PIDs] Failed to parse command line: %s, %s", error->message, line); g_clear_error (&error); } else if (error) *perror = error; return 0; } #endif static void close_pid (GPid pid, gboolean remove) { if (!pid) return; if (remove) pids_to_close = g_slist_remove (pids_to_close, GINT_TO_POINTER (pid)); if (kill (pid, SIGTERM) == 0) g_debug ("[PIDs] Process terminated: #%d", pid); else g_warning ("[PIDs] Failed to terminate process #%d: %s", pid, g_strerror (errno)); g_spawn_close_pid (pid); } static void sigterm_cb (gpointer user_data) { gboolean is_callback = GPOINTER_TO_INT (user_data); if (is_callback) g_debug ("SIGTERM received"); if (pids_to_close) { g_slist_foreach (pids_to_close, (GFunc)close_pid, GINT_TO_POINTER (FALSE)); g_slist_free (pids_to_close); pids_to_close = NULL; } if (is_callback) { gtk_main_quit (); #ifdef KILL_ON_SIGTERM /* LP: #1445461 */ g_debug ("Killing greeter with exit()..."); exit (EXIT_SUCCESS); #endif } } /* Power window */ static gboolean show_power_prompt (const gchar *action, const gchar* icon, const gchar* title, const gchar* message) { GMainLoop *loop; GtkWidget *focused; gboolean session_enabled; gboolean language_enabled; gboolean power_present = FALSE; gsize length; guint i; gint logged_in_users = 0; gchar **names; GList *items; GList *item; gchar *new_message = NULL; gchar *dialog_name = NULL; gchar *button_name = NULL; GtkResponseType response; /* Do anything only when power indicator is present */ names = config_get_string_list (NULL, CONFIG_KEY_INDICATORS, NULL); if (!names) names = (gchar**)DEFAULT_LAYOUT; length = g_strv_length (names); for (i = 0; i < length; ++i) { if (g_strcmp0 (names[i], "~power") == 0) { /* Power menu is present */ power_present = TRUE; break; } } if (names && names != (gchar**)DEFAULT_LAYOUT) g_strfreev (names); if (power_present != TRUE) { return FALSE; } /* Check if there are still users logged in, count them and if so, display a warning */ items = lightdm_user_list_get_users (lightdm_user_list_get_instance ()); for (item = items; item; item = item->next) { LightDMUser *user = item->data; if (lightdm_user_get_logged_in (user)) logged_in_users++; } if (logged_in_users > 0) { gchar *warning = g_strdup_printf (ngettext ("Warning: There is still %d user logged in.", "Warning: There are still %d users logged in.", logged_in_users), logged_in_users); message = new_message = g_markup_printf_escaped ("%s\n%s", warning, message); g_free (warning); } dialog_name = g_strconcat (action, "_dialog", NULL); button_name = g_strconcat (action, "_button", NULL); gtk_widget_set_name (power_window, dialog_name); gtk_widget_set_name (GTK_WIDGET (power_ok_button), button_name); gtk_button_set_label (power_ok_button, title); gtk_label_set_label (power_title, title); gtk_label_set_markup (power_text, message); gtk_image_set_from_icon_name (power_icon, icon, GTK_ICON_SIZE_DIALOG); g_free (button_name); g_free (dialog_name); g_free (new_message); loop = g_main_loop_new (NULL, FALSE); g_object_set_data (G_OBJECT (power_window), POWER_WINDOW_DATA_LOOP, loop); g_object_set_data (G_OBJECT (power_window), POWER_WINDOW_DATA_RESPONSE, GINT_TO_POINTER (GTK_RESPONSE_CANCEL)); focused = gtk_window_get_focus (GTK_WINDOW (gtk_widget_get_toplevel (GTK_WIDGET (screen_overlay)))); session_enabled = gtk_widget_get_sensitive (session_menuitem); language_enabled = gtk_widget_get_sensitive (language_menuitem); gtk_widget_set_sensitive (power_menuitem, FALSE); gtk_widget_set_sensitive (session_menuitem, FALSE); gtk_widget_set_sensitive (language_menuitem, FALSE); gtk_widget_hide (login_window); gtk_widget_show (power_window); gtk_widget_grab_focus (GTK_WIDGET (power_ok_button)); g_main_loop_run (loop); response = GPOINTER_TO_INT (g_object_get_data (G_OBJECT (power_window), POWER_WINDOW_DATA_RESPONSE)); g_main_loop_unref (loop); gtk_widget_hide (power_window); gtk_widget_show (login_window); gtk_widget_set_sensitive (power_menuitem, TRUE); gtk_widget_set_sensitive (session_menuitem, session_enabled); gtk_widget_set_sensitive (language_menuitem, language_enabled); if (focused) gtk_widget_grab_focus (focused); return response == GTK_RESPONSE_YES; } void power_button_clicked_cb (GtkButton *button, gpointer user_data) { GMainLoop *loop = g_object_get_data (G_OBJECT (power_window), POWER_WINDOW_DATA_LOOP); if (g_main_loop_is_running (loop)) g_main_loop_quit (loop); g_object_set_data (G_OBJECT (power_window), POWER_WINDOW_DATA_RESPONSE, GINT_TO_POINTER (button == power_ok_button ? GTK_RESPONSE_YES : GTK_RESPONSE_CANCEL)); } gboolean power_window_key_press_event_cb (GtkWidget *widget, GdkEventKey *event, gpointer user_data) { if (event->keyval == GDK_KEY_Escape) { power_button_clicked_cb (power_cancel_button, NULL); return TRUE; } return FALSE; } /* Handling window position */ static gboolean read_position_from_str (const gchar *s, DimensionPosition *x) { DimensionPosition p; gchar *end = NULL; gchar **parts = g_strsplit (s, ",", 2); if (parts[0]) { p.value = g_ascii_strtoll (parts[0], &end, 10); p.percentage = end && end[0] == '%'; p.sign = (p.value < 0 || (p.value == 0 && parts[0][0] == '-')) ? -1 : +1; if (p.value < 0) p.value *= -1; if (g_strcmp0(parts[1], "start") == 0) p.anchor = -1; else if (g_strcmp0(parts[1], "center") == 0) p.anchor = 0; else if (g_strcmp0(parts[1], "end") == 0) p.anchor = +1; else p.anchor = p.sign > 0 ? -1 : +1; *x = p; } else x = NULL; g_strfreev (parts); return x != NULL; } static WindowPosition* str_to_position (const gchar *str, const WindowPosition *default_value) { WindowPosition *pos = g_new0 (WindowPosition, 1); gchar *size_delim; gchar *value; gchar *x; gchar *y; *pos = *default_value; if (str) { value = g_strdup (str); x = value; y = strchr (value, ' '); if (y) (y++)[0] = '\0'; if (read_position_from_str (x, &pos->x)) /* If there is no y-part then y = x */ if (!y || !read_position_from_str (y, &pos->y)) pos->y = pos->x; size_delim = strchr (y ? y : x, ';'); if (size_delim) { x = size_delim + 1; if (read_position_from_str (x, &pos->width)) { y = strchr (x, ' '); if (y) (y++)[0] = '\0'; if (!y || !read_position_from_str (y, &pos->height)) if (!default_value->use_size) pos->height = pos->width; pos->use_size = TRUE; } } g_free (value); } return pos; } static gint get_absolute_position (const DimensionPosition *p, gint screen, gint window) { gint x = p->percentage ? (screen*p->value)/100 : p->value; x = p->sign < 0 ? screen - x : x; if (p->anchor > 0) x -= window; else if (p->anchor == 0) x -= window/2; if (x < 0) /* Offscreen: left/top */ return 0; else if (x + window > screen) /* Offscreen: right/bottom */ return screen - window; else return x; } gboolean screen_overlay_get_child_position_cb (GtkWidget *overlay, GtkWidget *widget, GdkRectangle *allocation, gpointer user_data) { const WindowPosition *pos = g_object_get_data (G_OBJECT (widget), WINDOW_DATA_POSITION); gint screen_width; gint screen_height; gint panel_height; if (!pos) return FALSE; screen_width = gtk_widget_get_allocated_width (overlay); screen_height = gtk_widget_get_allocated_height (overlay); if (pos->use_size) { allocation->width = get_absolute_position (&pos->width, screen_width, 0); allocation->height = get_absolute_position (&pos->height, screen_height, 0); } else { gtk_widget_get_preferred_width (widget, NULL, &allocation->width); gtk_widget_get_preferred_height (widget, NULL, &allocation->height); } allocation->x = get_absolute_position (&pos->x, screen_width, allocation->width); allocation->y = get_absolute_position (&pos->y, screen_height, allocation->height); /* Do not overlap panel window */ panel_height = gtk_widget_get_allocated_height (panel_window); if (panel_height && gtk_widget_get_visible (panel_window)) { GtkAlign valign = gtk_widget_get_valign (panel_window); if (valign == GTK_ALIGN_START && allocation->y < panel_height) allocation->y = panel_height; else if (valign == GTK_ALIGN_END && screen_height - allocation->y - allocation->height < panel_height) allocation->y = screen_height - allocation->height - panel_height; } return TRUE; } /* Clock */ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wformat-nonliteral" static gboolean clock_timeout_thread (void) { time_t rawtime; struct tm * timeinfo; gchar time_str[50]; gchar *markup; time (&rawtime); timeinfo = localtime (&rawtime); strftime (time_str, 50, clock_format, timeinfo); markup = g_markup_printf_escaped ("%s", time_str); if (g_strcmp0 (markup, gtk_label_get_label (GTK_LABEL (clock_label))) != 0) gtk_label_set_markup (GTK_LABEL (clock_label), markup); g_free (markup); return TRUE; } #pragma GCC diagnostic pop /* Message label */ static gboolean message_label_is_empty (void) { return gtk_label_get_text (message_label)[0] == '\0'; } static void set_message_label (LightDMMessageType type, const gchar *text) { if (type == LIGHTDM_MESSAGE_TYPE_INFO) gtk_info_bar_set_message_type (info_bar, GTK_MESSAGE_INFO); else gtk_info_bar_set_message_type (info_bar, GTK_MESSAGE_ERROR); gtk_label_set_text (message_label, text); gtk_widget_set_visible (GTK_WIDGET (info_bar), text && text[0]); } /* User image */ static void set_user_image (const gchar *username) { const gchar *path; LightDMUser *user = NULL; GdkPixbuf *image = NULL; GError *error = NULL; if (!gtk_widget_get_visible (GTK_WIDGET (user_image))) return; if (username) user = lightdm_user_list_get_user_by_name (lightdm_user_list_get_instance (), username); if (user) { path = lightdm_user_get_image (user); if (path) { image = gdk_pixbuf_new_from_file_at_scale (path, 80, 80, FALSE, &error); if (image) { gtk_image_set_from_pixbuf (GTK_IMAGE (user_image), image); g_object_unref (image); return; } else { g_debug ("Failed to load user image: %s", error->message); g_clear_error (&error); } } } if (default_user_pixbuf) gtk_image_set_from_pixbuf (GTK_IMAGE (user_image), default_user_pixbuf); else gtk_image_set_from_icon_name (GTK_IMAGE (user_image), default_user_icon, GTK_ICON_SIZE_DIALOG); } /* MenuCommand */ static MenuCommand* menu_command_parse (const gchar *name, const gchar *value, GtkWidget *menu_item) { return menu_command_parse_extended (name, value, menu_item, NULL, NULL); } static MenuCommand* menu_command_parse_extended (const gchar *name, const gchar *value, /* String to parse */ GtkWidget *menu_item, /* Menu item to connect */ const gchar *xid_app, /* Program that have "xembed" mode support */ const gchar *xid_arg) /* Argument that must be added to command line */ { MenuCommand *command; GError *error = NULL; gchar **argv; gint argc = 0; if (!value) return NULL; if (!g_shell_parse_argv (value, &argc, &argv, &error)) { if (error) g_warning ("[Command/%s] Failed to parse command line: %s", name, error->message); g_clear_error (&error); return NULL; } command = g_new0 (MenuCommand, 1); command->menu_item = menu_item; command->argc = argc; command->argv = argv; if (g_strcmp0 (argv[0], xid_app) == 0) { gboolean have_xid_arg = FALSE; gint i; for (i = 1; i < argc; ++i) if (g_strcmp0 (argv[i], xid_arg) == 0) { have_xid_arg = TRUE; break; } if (!have_xid_arg) { gchar *new_value = g_strdup_printf ("%s %s", value, xid_arg); if (g_shell_parse_argv (new_value, &argc, &argv, &error)) { g_strfreev (command->argv); command->argc = argc; command->argv = argv; have_xid_arg = TRUE; } else { if (error) g_warning ("[Command/%s] Failed to parse command line: %s", name, error->message); g_clear_error (&error); } g_free (new_value); } if (have_xid_arg) { command->widget = gtk_event_box_new (); gtk_overlay_add_overlay (screen_overlay, command->widget); } } command->name = name; return command; } static gboolean menu_command_run (MenuCommand *command) { GError *error = NULL; g_return_val_if_fail (command && g_strv_length (command->argv), FALSE); command->pid = 0; g_debug ("[Command/%s] Running command", command->name); if (command->widget) { GtkSocket* socket = NULL; gint out_fd = 0; GPid pid = spawn_argv_pid (command->argv, G_SPAWN_SEARCH_PATH, &out_fd, &error); if (pid && out_fd) { gchar* text = NULL; GIOChannel* out_channel = g_io_channel_unix_new (out_fd); if (g_io_channel_read_line (out_channel, &text, NULL, NULL, &error) == G_IO_STATUS_NORMAL) { gchar* end_ptr = NULL; gint id; text = g_strstrip (text); id = g_ascii_strtoll (text, &end_ptr, 0); if (id != 0 && end_ptr > text) { socket = GTK_SOCKET (gtk_socket_new ()); gtk_container_foreach (GTK_CONTAINER (command->widget), (GtkCallback)gtk_widget_destroy, NULL); gtk_container_add (GTK_CONTAINER (command->widget), GTK_WIDGET (socket)); gtk_socket_add_id (socket, id); gtk_widget_show_all (GTK_WIDGET (command->widget)); command->pid = pid; } else g_warning ("[Command/%s] Failed to get '%s' socket for: unrecognized output", command->name, command->argv[0]); g_free (text); } } if (!command->pid && pid) close_pid (pid, TRUE); } else { command->pid = spawn_argv_pid (command->argv, G_SPAWN_SEARCH_PATH | G_SPAWN_DO_NOT_REAP_CHILD, NULL, &error); if (command->pid) g_child_watch_add (command->pid, (GChildWatchFunc)menu_command_terminated_cb, command); } if (!command->pid) { if (error) g_warning ("[Command/%s] Failed to run: %s", command->name, error->message); gtk_check_menu_item_set_active (GTK_CHECK_MENU_ITEM (command->menu_item), FALSE); } g_clear_error (&error); return command->pid; } static gboolean menu_command_stop (MenuCommand *command) { g_return_val_if_fail (command, FALSE); if (command->pid) { g_debug ("[Command/%s] Stopping command", command->name); close_pid (command->pid, TRUE); command->pid = 0; if (command->menu_item) gtk_check_menu_item_set_active (GTK_CHECK_MENU_ITEM (command->menu_item), FALSE); if (command->widget) gtk_widget_hide (command->widget); } return TRUE; } static void menu_command_terminated_cb (GPid pid, gint status, MenuCommand *command) { menu_command_stop (command); } static void a11y_menuitem_toggled_cb (GtkCheckMenuItem *item, const gchar* name) { config_set_bool (STATE_SECTION_A11Y, name, gtk_check_menu_item_get_active (item)); } /* Session */ static gboolean is_valid_session (GList* items, const gchar* session) { for (; items; items = g_list_next (items)) if (g_strcmp0 (session, lightdm_session_get_key (items->data)) == 0) return TRUE; return FALSE; } static gchar* get_session (void) { return g_strdup (current_session); } static void set_session (const gchar *session) { gchar *last_session = NULL; GList *sessions = lightdm_get_sessions (); /* Validation */ if (!session || !is_valid_session (sessions, session)) { /* previous session */ last_session = config_get_string (STATE_SECTION_GREETER, STATE_KEY_LAST_SESSION, NULL); if (last_session && g_strcmp0 (session, last_session) != 0 && is_valid_session (sessions, last_session)) session = last_session; else { /* default */ const gchar* default_session = lightdm_greeter_get_default_session_hint (greeter); if (g_strcmp0 (session, default_session) != 0 && is_valid_session (sessions, default_session)) session = default_session; /* first in the sessions list */ else if (sessions) session = lightdm_session_get_key (sessions->data); /* give up */ else session = NULL; } } if (gtk_widget_get_visible (session_menuitem)) { GList *menu_iter = NULL; GList *menu_items = gtk_container_get_children (GTK_CONTAINER (session_menu)); if (session) { for (menu_iter = menu_items; menu_iter != NULL; menu_iter = g_list_next (menu_iter)) if (g_strcmp0 (session, g_object_get_data (G_OBJECT (menu_iter->data), SESSION_DATA_KEY)) == 0) { /* Set menuitem-image to session-badge */ GtkIconTheme *icon_theme = gtk_icon_theme_get_default (); gchar* session_name = g_ascii_strdown (session, -1); gchar* icon_name = g_strdup_printf ("%s_badge-symbolic", session_name); g_free (session_name); if (gtk_icon_theme_has_icon (icon_theme, icon_name)) gtk_image_set_from_icon_name (GTK_IMAGE (session_badge), icon_name, GTK_ICON_SIZE_MENU); else gtk_image_set_from_icon_name (GTK_IMAGE (session_badge), "document-properties-symbolic", GTK_ICON_SIZE_MENU); g_free (icon_name); break; } } if (!menu_iter) menu_iter = menu_items; if (menu_iter) gtk_check_menu_item_set_active (GTK_CHECK_MENU_ITEM (menu_iter->data), TRUE); } g_free (current_session); current_session = g_strdup (session); g_free (last_session); } void session_selected_cb (GtkMenuItem *menuitem, gpointer user_data) { if (gtk_check_menu_item_get_active (GTK_CHECK_MENU_ITEM (menuitem))) set_session (g_object_get_data (G_OBJECT (menuitem), SESSION_DATA_KEY)); } /* Session language */ static gchar* get_language (void) { GList *menu_items, *menu_iter; /* if the user manually selected a language, use it */ if (current_language) return g_strdup (current_language); menu_items = gtk_container_get_children (GTK_CONTAINER (language_menu)); for (menu_iter = menu_items; menu_iter != NULL; menu_iter = g_list_next (menu_iter)) { if (gtk_check_menu_item_get_active (GTK_CHECK_MENU_ITEM (menu_iter->data))) return g_strdup (g_object_get_data (G_OBJECT (menu_iter->data), LANGUAGE_DATA_CODE)); } return NULL; } static void set_language (const gchar *language) { const gchar *default_language = NULL; GList *menu_items, *menu_iter; if (!gtk_widget_get_visible (language_menuitem)) { g_free (current_language); current_language = g_strdup (language); return; } menu_items = gtk_container_get_children (GTK_CONTAINER (language_menu)); if (language) { for (menu_iter = menu_items; menu_iter != NULL; menu_iter = g_list_next (menu_iter)) { gchar *s; gboolean matched; s = g_strdup (g_object_get_data (G_OBJECT (menu_iter->data), LANGUAGE_DATA_CODE)); matched = g_strcmp0 (s, language) == 0; g_free (s); if (matched) { gtk_check_menu_item_set_active (GTK_CHECK_MENU_ITEM (menu_iter->data), TRUE); g_free (current_language); current_language = g_strdup (language); gtk_menu_item_set_label (GTK_MENU_ITEM (language_menuitem),language); return; } } } /* If failed to find this language, then try the default */ if (lightdm_get_language ()) { default_language = lightdm_language_get_code (lightdm_get_language ()); gtk_menu_item_set_label (GTK_MENU_ITEM (language_menuitem), default_language); } if (default_language && g_strcmp0 (default_language, language) != 0) set_language (default_language); /* If all else fails, just use the first language from the menu */ else { for (menu_iter = menu_items; menu_iter != NULL; menu_iter = g_list_next (menu_iter)) { if (gtk_check_menu_item_get_active (GTK_CHECK_MENU_ITEM (menu_iter->data))) { gtk_menu_item_set_label (GTK_MENU_ITEM (language_menuitem), g_strdup (g_object_get_data (G_OBJECT (menu_iter->data), LANGUAGE_DATA_CODE))); break; } } } } void language_selected_cb (GtkMenuItem *menuitem, gpointer user_data) { if (gtk_check_menu_item_get_active (GTK_CHECK_MENU_ITEM (menuitem))) { gchar *language = g_object_get_data (G_OBJECT (menuitem), LANGUAGE_DATA_CODE); set_language (language); } } /* Pending questions */ static void pam_message_finalize (PAMConversationMessage *message) { g_free (message->text); g_free (message); } static void process_prompts (LightDMGreeter *ldm) { if (!pending_questions) return; /* always allow the user to change username again */ gtk_widget_set_sensitive (GTK_WIDGET (username_entry), TRUE); gtk_widget_set_sensitive (GTK_WIDGET (password_entry), TRUE); /* Special case: no user selected from list, so PAM asks us for the user * via a prompt. For that case, use the username field */ if (!prompted && pending_questions && !pending_questions->next && ((PAMConversationMessage *) pending_questions->data)->is_prompt && ((PAMConversationMessage *) pending_questions->data)->type.prompt != LIGHTDM_PROMPT_TYPE_SECRET && gtk_widget_get_visible ((GTK_WIDGET (username_entry))) && lightdm_greeter_get_authentication_user (ldm) == NULL) { prompted = TRUE; prompt_active = TRUE; gtk_widget_grab_focus (GTK_WIDGET (username_entry)); gtk_widget_show (GTK_WIDGET (password_entry)); return; } while (pending_questions) { PAMConversationMessage *message = (PAMConversationMessage *) pending_questions->data; pending_questions = g_slist_remove (pending_questions, (gconstpointer) message); if (!message->is_prompt) { /* FIXME: this doesn't show multiple messages, but that was * already the case before. */ set_message_label (message->type.message, message->text); continue; } gtk_widget_show (GTK_WIDGET (password_entry)); gtk_widget_grab_focus (GTK_WIDGET (password_entry)); gtk_entry_set_text (password_entry, ""); gtk_entry_set_visibility (password_entry, message->type.prompt != LIGHTDM_PROMPT_TYPE_SECRET); if (message_label_is_empty () && password_prompted) { /* No message was provided beforehand and this is not the * first password prompt, so use the prompt as label, * otherwise the user will be completely unclear of what * is going on. Actually, the fact that prompt messages are * not shown is problematic in general, especially if * somebody uses a custom PAM module that wants to ask * something different. */ gchar *str = message->text; if (g_str_has_suffix (str, ": ")) str = g_strndup (str, strlen (str) - 2); else if (g_str_has_suffix (str, ":")) str = g_strndup (str, strlen (str) - 1); set_message_label (LIGHTDM_MESSAGE_TYPE_INFO, str); if (str != message->text) g_free (str); } gtk_widget_grab_focus (GTK_WIDGET (password_entry)); prompted = TRUE; password_prompted = TRUE; prompt_active = TRUE; /* If we have more stuff after a prompt, assume that other prompts are pending, * so stop here. */ break; } } /* Panel and indicators */ static gboolean panel_item_enter_notify_cb (GtkWidget *widget, GdkEvent *event, gpointer enter) { GtkStyleContext *context = gtk_widget_get_style_context (widget); if (GPOINTER_TO_INT (enter)) gtk_style_context_add_class (context, PANEL_ITEM_STYLE_HOVERED); else gtk_style_context_remove_class (context, PANEL_ITEM_STYLE_HOVERED); return FALSE; } static void panel_add_item (GtkWidget *widget, gint index, GreeterPanelItemType item_type) { gint insert_pos = 0; GList* items = gtk_container_get_children (GTK_CONTAINER (menubar)); GList* item; for (item = items; item; item = item->next) { if (GPOINTER_TO_INT (g_object_get_data (G_OBJECT (item->data), PANEL_ITEM_DATA_INDEX)) < index) break; insert_pos++; } g_list_free (items); gtk_style_context_add_class (gtk_widget_get_style_context (widget), PANEL_ITEM_STYLE); gtk_style_context_add_class (gtk_widget_get_style_context (widget), PANEL_ITEM_STYLES[item_type]); if (item_type == PANEL_ITEM_INDICATOR) { g_signal_connect (G_OBJECT (widget), "enter-notify-event", G_CALLBACK (panel_item_enter_notify_cb), GINT_TO_POINTER (TRUE)); g_signal_connect (G_OBJECT (widget), "leave-notify-event", G_CALLBACK (panel_item_enter_notify_cb), GINT_TO_POINTER (FALSE)); } gtk_widget_show (widget); gtk_menu_shell_insert (GTK_MENU_SHELL (menubar), widget, insert_pos); } #ifdef HAVE_LIBINDICATOR static gboolean indicator_entry_scrolled_cb (GtkWidget *menuitem, GdkEventScroll *event, gpointer data) { IndicatorObject *io; IndicatorObjectEntry *entry; g_return_val_if_fail (GTK_IS_WIDGET (menuitem), FALSE); io = g_object_get_data (G_OBJECT (menuitem), INDICATOR_ITEM_DATA_OBJECT); entry = g_object_get_data (G_OBJECT (menuitem), INDICATOR_ITEM_DATA_ENTRY); g_return_val_if_fail (INDICATOR_IS_OBJECT (io), FALSE); g_signal_emit_by_name(io, INDICATOR_OBJECT_SIGNAL_ENTRY_SCROLLED, entry, 1, event->direction); return FALSE; } static void indicator_entry_activated_cb (GtkWidget *widget, gpointer user_data) { IndicatorObject *io; IndicatorObjectEntry *entry; g_return_if_fail (GTK_IS_WIDGET (widget)); io = g_object_get_data (G_OBJECT (widget), INDICATOR_ITEM_DATA_OBJECT); entry = g_object_get_data (G_OBJECT (widget), INDICATOR_ITEM_DATA_ENTRY); g_return_if_fail (INDICATOR_IS_OBJECT (io)); return indicator_object_entry_activate (io, entry, gtk_get_current_event_time ()); } static GtkWidget* indicator_entry_create_menuitem (IndicatorObject *io, IndicatorObjectEntry *entry, GtkWidget *mbar) { GtkWidget *box, *menuitem; gint index = GPOINTER_TO_INT (g_object_get_data (G_OBJECT (io), PANEL_ITEM_DATA_INDEX)); box = gtk_box_new (GTK_ORIENTATION_HORIZONTAL, 3); menuitem = gtk_menu_item_new (); gtk_widget_add_events (GTK_WIDGET (menuitem), GDK_SCROLL_MASK); g_object_set_data (G_OBJECT (menuitem), INDICATOR_ITEM_DATA_BOX, box); g_object_set_data (G_OBJECT (menuitem), INDICATOR_ITEM_DATA_OBJECT, io); g_object_set_data (G_OBJECT (menuitem), INDICATOR_ITEM_DATA_ENTRY, entry); g_object_set_data (G_OBJECT (menuitem), PANEL_ITEM_DATA_INDEX, GINT_TO_POINTER (index)); g_signal_connect (G_OBJECT (menuitem), "activate", G_CALLBACK (indicator_entry_activated_cb), NULL); g_signal_connect (G_OBJECT (menuitem), "scroll-event", G_CALLBACK (indicator_entry_scrolled_cb), NULL); if (entry->image) gtk_box_pack_start (GTK_BOX (box), GTK_WIDGET (entry->image), FALSE, FALSE, 1); if (entry->label) gtk_box_pack_start (GTK_BOX (box), GTK_WIDGET (entry->label), FALSE, FALSE, 1); if (entry->menu) gtk_menu_item_set_submenu (GTK_MENU_ITEM (menuitem), GTK_WIDGET (entry->menu)); gtk_container_add (GTK_CONTAINER (menuitem), box); gtk_widget_show (box); panel_add_item (menuitem, index, PANEL_ITEM_INDICATOR); return menuitem; } static void indicator_entry_added_cb (IndicatorObject *io, IndicatorObjectEntry *entry, gpointer user_data) { GHashTable *menuitem_lookup; GtkWidget *menuitem; /* if the menuitem doesn't already exist, create it now */ menuitem_lookup = g_object_get_data (G_OBJECT (io), INDICATOR_DATA_MENUITEMS); g_return_if_fail (menuitem_lookup); menuitem = g_hash_table_lookup (menuitem_lookup, entry); if (!GTK_IS_WIDGET (menuitem)) { menuitem = indicator_entry_create_menuitem (io, entry, GTK_WIDGET (user_data)); g_hash_table_insert (menuitem_lookup, entry, menuitem); } gtk_widget_show (menuitem); } static void remove_indicator_entry_cb (GtkWidget *widget, gpointer userdata) { IndicatorObject *io; GHashTable *menuitem_lookup; GtkWidget *menuitem; gpointer entry; io = g_object_get_data (G_OBJECT (widget), INDICATOR_ITEM_DATA_OBJECT); if (!INDICATOR_IS_OBJECT (io)) return; entry = g_object_get_data (G_OBJECT (widget), INDICATOR_ITEM_DATA_ENTRY); if (entry != userdata) return; menuitem_lookup = g_object_get_data (G_OBJECT (io), INDICATOR_DATA_MENUITEMS); g_return_if_fail (menuitem_lookup); menuitem = g_hash_table_lookup (menuitem_lookup, entry); if (GTK_IS_WIDGET (menuitem)) gtk_widget_hide (menuitem); gtk_widget_destroy (widget); } static void indicator_entry_removed_cb (IndicatorObject *io, IndicatorObjectEntry *entry, gpointer user_data) { gtk_container_foreach (GTK_CONTAINER (user_data), remove_indicator_entry_cb, entry); } static void indicator_menu_show_cb (IndicatorObject *io, IndicatorObjectEntry *entry, guint32 timestamp, gpointer user_data) { IndicatorObjectEntry *entrydata; GtkWidget *menuitem; GList *entries, *lp; menuitem = GTK_WIDGET (user_data); if (!entry) { /* Close any open menus instead of opening one */ entries = indicator_object_get_entries (io); for (lp = entries; lp; lp = g_list_next (lp)) { entrydata = lp->data; gtk_menu_popdown (entrydata->menu); } g_list_free (entries); /* And tell the menuitem to exit activation mode too */ gtk_menu_shell_cancel (GTK_MENU_SHELL (menuitem)); } } static void greeter_set_env (const gchar* key, const gchar* value) { GDBusProxy *proxy; GVariantBuilder *builder; GVariant *result; g_setenv (key, value, TRUE); proxy = g_dbus_proxy_new_for_bus_sync (G_BUS_TYPE_SESSION, G_DBUS_PROXY_FLAGS_NONE, NULL, "org.freedesktop.DBus", "/org/freedesktop/DBus", "org.freedesktop.DBus", NULL, NULL); builder = g_variant_builder_new (G_VARIANT_TYPE_ARRAY); g_variant_builder_add (builder, "{ss}", key, value); result = g_dbus_proxy_call_sync (proxy, "UpdateActivationEnvironment", g_variant_new ("(a{ss})", builder), G_DBUS_CALL_FLAGS_NONE, -1, NULL, NULL); g_variant_unref (result); g_variant_builder_unref (builder); g_object_unref (proxy); } #endif static gboolean menu_item_accel_closure_cb (GtkAccelGroup *accel_group, GObject *acceleratable, guint keyval, GdkModifierType modifier, gpointer data) { gtk_menu_item_activate (data); return FALSE; } /* Maybe unnecessary (in future) trick to enable accelerators for hidden/detached menu items */ static void reassign_menu_item_accel (GtkWidget *item) { GtkWidget *submenu; GtkAccelKey key; const gchar *accel_path = gtk_menu_item_get_accel_path (GTK_MENU_ITEM (item)); if (accel_path && gtk_accel_map_lookup_entry (accel_path, &key)) { GClosure *closure = g_cclosure_new (G_CALLBACK (menu_item_accel_closure_cb), item, NULL); gtk_accel_group_connect (gtk_menu_get_accel_group (GTK_MENU (gtk_widget_get_parent (item))), key.accel_key, key.accel_mods, key.accel_flags, closure); g_closure_unref (closure); } submenu = gtk_menu_item_get_submenu (GTK_MENU_ITEM (item)); if (submenu) gtk_container_foreach (GTK_CONTAINER (submenu), (GtkCallback)reassign_menu_item_accel, NULL); } static void init_indicators (void) { GHashTable *builtin_items = NULL; GHashTableIter iter; gpointer iter_value; gsize length = 0; guint i; #ifdef HAVE_LIBINDICATOR IndicatorObject *io = NULL; gboolean inited = FALSE; gchar *path = NULL; #endif gchar **names = config_get_string_list (NULL, CONFIG_KEY_INDICATORS, NULL); if (!names) names = (gchar**)DEFAULT_LAYOUT; length = g_strv_length (names); builtin_items = g_hash_table_new_full (g_str_hash, g_str_equal, (GDestroyNotify)g_free, NULL); g_hash_table_insert (builtin_items, g_strdup("~power"), power_menuitem); g_hash_table_insert (builtin_items, g_strdup("~session"), session_menuitem); g_hash_table_insert (builtin_items, g_strdup("~language"), language_menuitem); g_hash_table_insert (builtin_items, g_strdup("~a11y"), a11y_menuitem); g_hash_table_insert (builtin_items, g_strdup("~layout"), layout_menuitem); g_hash_table_insert (builtin_items, g_strdup("~host"), host_menuitem); g_hash_table_insert (builtin_items, g_strdup("~clock"), clock_menuitem); g_hash_table_iter_init (&iter, builtin_items); while (g_hash_table_iter_next (&iter, NULL, &iter_value)) gtk_container_remove (GTK_CONTAINER (menubar), iter_value); for (i = 0; i < length; ++i) { if (names[i][0] == '~') { /* Built-in indicators */ GreeterPanelItemType item_type = PANEL_ITEM_INDICATOR; if (g_hash_table_lookup_extended (builtin_items, names[i], NULL, &iter_value)) g_hash_table_remove (builtin_items, (gconstpointer)names[i]); else if (g_strcmp0 (names[i], "~separator") == 0) { GtkWidget *separator = gtk_separator_new (GTK_ORIENTATION_VERTICAL); item_type = PANEL_ITEM_SEPARATOR; iter_value = gtk_separator_menu_item_new (); gtk_widget_show (separator); gtk_container_add (iter_value, separator); } else if (g_strcmp0 (names[i], "~spacer") == 0) { item_type = PANEL_ITEM_SPACER; iter_value = gtk_separator_menu_item_new (); gtk_menu_item_set_label (iter_value, ""); gtk_widget_set_hexpand (iter_value, TRUE); } else if (names[i][1] == '~') { item_type = PANEL_ITEM_TEXT; iter_value = gtk_separator_menu_item_new (); gtk_menu_item_set_label (iter_value, &names[i][2]); } else continue; g_object_set_data (G_OBJECT (iter_value), PANEL_ITEM_DATA_INDEX, GINT_TO_POINTER (i)); panel_add_item (iter_value, i, item_type); continue; } #ifdef HAVE_LIBINDICATOR if (!inited) { /* Set indicators to run with reduced functionality */ greeter_set_env ("INDICATOR_GREETER_MODE", "1"); /* Don't allow virtual file systems? */ greeter_set_env ("GIO_USE_VFS", "local"); greeter_set_env ("GVFS_DISABLE_FUSE", "1"); inited = TRUE; } if (g_path_is_absolute (names[i])) { /* library with absolute path */ io = indicator_object_new_from_file (names[i]); } else if (g_str_has_suffix (names[i], G_MODULE_SUFFIX)) { /* library */ path = g_build_filename (INDICATOR_DIR, names[i], NULL); io = indicator_object_new_from_file (path); } #ifdef HAVE_LIBINDICATOR_NG else { /* service file */ if (strchr (names[i], '.')) path = g_strdup_printf ("%s/%s", UNITY_INDICATOR_DIR, names[i]); else path = g_strdup_printf ("%s/com.canonical.indicator.%s", UNITY_INDICATOR_DIR, names[i]); io = INDICATOR_OBJECT (indicator_ng_new_for_profile (path, "desktop_greeter", NULL)); } #endif if (io) { GList *entries, *lp; /* used to store/fetch menu entries */ g_object_set_data_full (G_OBJECT (io), INDICATOR_DATA_MENUITEMS, g_hash_table_new (g_direct_hash, g_direct_equal), (GDestroyNotify) g_hash_table_destroy); g_object_set_data (G_OBJECT (io), PANEL_ITEM_DATA_INDEX, GINT_TO_POINTER (i)); g_signal_connect (G_OBJECT (io), INDICATOR_OBJECT_SIGNAL_ENTRY_ADDED, G_CALLBACK (indicator_entry_added_cb), menubar); g_signal_connect (G_OBJECT (io), INDICATOR_OBJECT_SIGNAL_ENTRY_REMOVED, G_CALLBACK (indicator_entry_removed_cb), menubar); g_signal_connect (G_OBJECT (io), INDICATOR_OBJECT_SIGNAL_MENU_SHOW, G_CALLBACK (indicator_menu_show_cb), menubar); entries = indicator_object_get_entries (io); for (lp = entries; lp; lp = g_list_next (lp)) indicator_entry_added_cb (io, lp->data, menubar); g_list_free (entries); } else { g_warning ("Indicator \"%s\": failed to load", names[i]); } g_free (path); #endif } if (names && names != (gchar**)DEFAULT_LAYOUT) g_strfreev (names); if (builtin_items) { g_hash_table_iter_init (&iter, builtin_items); while (g_hash_table_iter_next (&iter, NULL, &iter_value)) { reassign_menu_item_accel (iter_value); gtk_widget_hide (iter_value); } g_hash_table_unref (builtin_items); } } /* Layout indicator */ static void layout_selected_cb (GtkCheckMenuItem *menuitem, gpointer user_data) { if (gtk_check_menu_item_get_active (menuitem)) { #ifdef HAVE_LIBXKLAVIER gint group = GPOINTER_TO_INT (g_object_get_data (G_OBJECT (menuitem), LAYOUT_DATA_GROUP)); xkl_engine_lock_group (xkl_engine, group); #else const gchar *name = g_object_get_data (G_OBJECT (menuitem), LAYOUT_DATA_NAME); GList *item; for (item = lightdm_get_layouts (); item; item = g_list_next (item)) { if (g_strcmp0 (name, lightdm_layout_get_name (item->data)) == 0) { lightdm_set_layout (item->data); gtk_menu_item_set_label (GTK_MENU_ITEM (layout_menuitem), g_object_get_data (G_OBJECT (menuitem), LAYOUT_DATA_LABEL)); break; } } #endif } } static void update_layouts_menu (void) { #ifdef HAVE_LIBXKLAVIER XklConfigRegistry *registry; XklConfigRec *config; XklConfigItem *config_item; GSList *menu_group = NULL; gint i; g_list_free_full (gtk_container_get_children (GTK_CONTAINER (layout_menu)), (GDestroyNotify)gtk_widget_destroy); config = xkl_config_rec_new (); if (!xkl_config_rec_get_from_server (config, xkl_engine)) { g_object_unref (config); g_warning ("Failed to get Xkl configuration from server"); return; } config_item = xkl_config_item_new (); registry = xkl_config_registry_get_instance (xkl_engine); xkl_config_registry_load (registry, FALSE); for (i = 0; config->layouts[i] != NULL; ++i) { const gchar *layout = config->layouts[i] ? config->layouts[i] : ""; const gchar *variant = config->variants[i] ? config->variants[i] : ""; gchar *label = strlen (variant) > 0 ? g_strdup_printf ("%s_%s", layout, variant) : g_strdup (layout); GtkWidget *menuitem = gtk_radio_menu_item_new (menu_group); menu_group = gtk_radio_menu_item_get_group (GTK_RADIO_MENU_ITEM (menuitem)); g_snprintf (config_item->name, sizeof (config_item->name), "%s", variant); if (xkl_config_registry_find_variant (registry, layout, config_item)) gtk_menu_item_set_label (GTK_MENU_ITEM (menuitem), config_item->description); else { g_snprintf (config_item->name, sizeof (config_item->name), "%s", layout); if (xkl_config_registry_find_layout (registry, config_item)) gtk_menu_item_set_label (GTK_MENU_ITEM (menuitem), config_item->description); else gtk_menu_item_set_label (GTK_MENU_ITEM (menuitem), label); } g_object_set_data_full (G_OBJECT (menuitem), LAYOUT_DATA_LABEL, label, g_free); g_object_set_data (G_OBJECT (menuitem), LAYOUT_DATA_GROUP, GINT_TO_POINTER (i)); g_signal_connect (G_OBJECT (menuitem), "activate", G_CALLBACK (layout_selected_cb), NULL); gtk_menu_shell_append (GTK_MENU_SHELL (layout_menu), menuitem); gtk_widget_show (GTK_WIDGET (menuitem)); } g_object_unref (registry); g_object_unref (config_item); g_object_unref (config); #else GSList *menu_group = NULL; GList *item; g_list_free_full (gtk_container_get_children (GTK_CONTAINER (layout_menu)), (GDestroyNotify)gtk_widget_destroy); for (item = lightdm_get_layouts (); item; item = g_list_next (item)) { LightDMLayout *layout = item->data; GtkWidget *menuitem = gtk_radio_menu_item_new (menu_group); menu_group = gtk_radio_menu_item_get_group (GTK_RADIO_MENU_ITEM (menuitem)); g_object_set_data_full (G_OBJECT (menuitem), LAYOUT_DATA_LABEL, g_strdelimit (g_strdup (lightdm_layout_get_name (layout)), "\t ", '_'), g_free); g_object_set_data_full (G_OBJECT (menuitem), LAYOUT_DATA_NAME, g_strdup (lightdm_layout_get_name (layout)), g_free); g_signal_connect (G_OBJECT (menuitem), "activate", G_CALLBACK (layout_selected_cb), NULL); gtk_menu_item_set_label (GTK_MENU_ITEM (menuitem), lightdm_layout_get_description (layout)); gtk_menu_shell_append (GTK_MENU_SHELL (layout_menu), menuitem); gtk_widget_show (GTK_WIDGET (menuitem)); } #endif } static void update_layouts_menu_state (void) { #ifdef HAVE_LIBXKLAVIER XklState *state; GList *menu_items; GtkCheckMenuItem *menu_item; #else const gchar *name; GList *menu_items; GList *menu_iter; LightDMLayout *layout; #endif #ifdef HAVE_LIBXKLAVIER state = xkl_engine_get_current_state (xkl_engine); menu_items = gtk_container_get_children (GTK_CONTAINER (layout_menu)); menu_item = g_list_nth_data (menu_items, state->group); if (menu_item) { gtk_menu_item_set_label (GTK_MENU_ITEM (layout_menuitem), g_object_get_data (G_OBJECT (menu_item), LAYOUT_DATA_LABEL)); gtk_check_menu_item_set_active (menu_item, TRUE); } else gtk_menu_item_set_label (GTK_MENU_ITEM (layout_menuitem), "??"); g_list_free (menu_items); #else layout = lightdm_get_layout (); g_return_if_fail (layout != NULL); name = lightdm_layout_get_name (layout); menu_items = gtk_container_get_children (GTK_CONTAINER (layout_menu)); for (menu_iter = menu_items; menu_iter; menu_iter = g_list_next (menu_iter)) { if (g_strcmp0 (name, g_object_get_data (G_OBJECT (menu_iter->data), LAYOUT_DATA_NAME)) == 0) { gtk_check_menu_item_set_active (menu_iter->data, TRUE); gtk_menu_item_set_label (GTK_MENU_ITEM (layout_menuitem), g_object_get_data (G_OBJECT (menu_iter->data), LAYOUT_DATA_LABEL)); break; } } g_list_free (menu_items); #endif } #ifdef HAVE_LIBXKLAVIER static void xkl_state_changed_cb (XklEngine *engine, XklEngineStateChange change, gint group, gboolean restore, gpointer user_data) { if (change == GROUP_CHANGED) update_layouts_menu_state (); } static void xkl_config_changed_cb (XklEngine *engine, gpointer user_data) { /* tip: xkl_config_rec_get_from_server() return old settings */ update_layouts_menu (); update_layouts_menu_state (); } static GdkFilterReturn xkl_xevent_filter (GdkXEvent *xev, GdkEvent *event, gpointer data) { XEvent *xevent = (XEvent *) xev; xkl_engine_filter_events (xkl_engine, xevent); return GDK_FILTER_CONTINUE; } #endif /* a11y indciator */ void a11y_font_cb (GtkCheckMenuItem *item) { if (gtk_check_menu_item_get_active (item)) { gchar *font_name, **tokens; guint length; g_object_get (gtk_settings_get_default (), "gtk-font-name", &font_name, NULL); tokens = g_strsplit (font_name, " ", -1); length = g_strv_length (tokens); if (length > 1) { gint size = atoi (tokens[length - 1]); if (size > 0) { g_free (tokens[length - 1]); tokens[length - 1] = g_strdup_printf ("%d", size + 10); g_free (font_name); font_name = g_strjoinv (" ", tokens); } } g_strfreev (tokens); g_object_set (gtk_settings_get_default (), "gtk-font-name", font_name, NULL); } else { g_object_set (gtk_settings_get_default (), "gtk-font-name", default_font_name, NULL); } } void a11y_contrast_cb (GtkCheckMenuItem *item) { if (gtk_check_menu_item_get_active (item)) { g_object_set (gtk_settings_get_default (), "gtk-theme-name", "HighContrast", NULL); g_object_set (gtk_settings_get_default (), "gtk-icon-theme-name", "HighContrast", NULL); } else { g_object_set (gtk_settings_get_default (), "gtk-theme-name", default_theme_name, NULL); g_object_set (gtk_settings_get_default (), "gtk-icon-theme-name", default_icon_theme_name, NULL); } } void a11y_keyboard_cb (GtkCheckMenuItem *item, gpointer user_data) { if (gtk_check_menu_item_get_active (item)) menu_command_run (a11y_keyboard_command); else menu_command_stop (a11y_keyboard_command); } void a11y_reader_cb (GtkCheckMenuItem *item, gpointer user_data) { if (gtk_check_menu_item_get_active (item)) menu_command_run (a11y_reader_command); else menu_command_stop (a11y_reader_command); } /* Power indicator */ static void power_menu_cb (GtkWidget *menuitem, gpointer userdata) { gtk_widget_set_sensitive (suspend_menuitem, lightdm_get_can_suspend ()); gtk_widget_set_sensitive (hibernate_menuitem, lightdm_get_can_hibernate ()); gtk_widget_set_sensitive (restart_menuitem, lightdm_get_can_restart ()); gtk_widget_set_sensitive (shutdown_menuitem, lightdm_get_can_shutdown ()); } void suspend_cb (GtkWidget *widget, LightDMGreeter *ldm) { lightdm_suspend (NULL); } void hibernate_cb (GtkWidget *widget, LightDMGreeter *ldm) { lightdm_hibernate (NULL); } void restart_cb (GtkWidget *widget, LightDMGreeter *ldm) { if (show_power_prompt ("restart", "view-refresh-symbolic", _("Restart"), _("Are you sure you want to close all programs and restart the computer?"))) lightdm_restart (NULL); } void shutdown_cb (GtkWidget *widget, LightDMGreeter *ldm) { if (show_power_prompt ("shutdown", "system-shutdown-symbolic", _("Shut Down"), _("Are you sure you want to close all programs and shut down the computer?"))) lightdm_shutdown (NULL); } static void set_login_button_label (LightDMGreeter *ldm, const gchar *username) { LightDMUser *user; gboolean logged_in = FALSE; user = lightdm_user_list_get_user_by_name (lightdm_user_list_get_instance (), username); if (user) logged_in = lightdm_user_get_logged_in (user); if (logged_in) gtk_button_set_label (login_button, _("Unlock")); else gtk_button_set_label (login_button, _("Log In")); /* and disable the session and language widgets */ gtk_widget_set_sensitive (GTK_WIDGET (session_menuitem), !logged_in); gtk_widget_set_sensitive (GTK_WIDGET (language_menuitem), !logged_in); } static guint set_user_background_delayed_id = 0; static gboolean set_user_background_delayed_cb (const gchar *value) { greeter_background_set_custom_background (greeter_background, value); set_user_background_delayed_id = 0; return G_SOURCE_REMOVE; } static void set_user_background (const gchar *user_name) { const gchar *value = NULL; if (user_name) { LightDMUser *user = lightdm_user_list_get_user_by_name (lightdm_user_list_get_instance (), user_name); if (user) value = lightdm_user_get_background (user); } if (set_user_background_delayed_id) { g_source_remove (set_user_background_delayed_id); set_user_background_delayed_id = 0; } if (!value) greeter_background_set_custom_background (greeter_background, NULL); else { /* Small delay before changing background */ set_user_background_delayed_id = g_timeout_add_full (G_PRIORITY_DEFAULT, USER_BACKGROUND_DELAY, (GSourceFunc)set_user_background_delayed_cb, g_strdup (value), g_free); } } static void start_authentication (const gchar *username) { cancelling = FALSE; prompted = FALSE; password_prompted = FALSE; prompt_active = FALSE; if (pending_questions) { g_slist_free_full (pending_questions, (GDestroyNotify) pam_message_finalize); pending_questions = NULL; } config_set_string (STATE_SECTION_GREETER, STATE_KEY_LAST_USER, username); if (g_strcmp0 (username, "*other") == 0) { gtk_widget_show (GTK_WIDGET (username_entry)); gtk_widget_show (GTK_WIDGET (cancel_button)); #ifdef HAVE_LIBLIGHTDMGOBJECT_1_19_2 lightdm_greeter_authenticate (greeter, NULL, NULL); #else lightdm_greeter_authenticate (greeter, NULL); #endif if (lightdm_greeter_get_lock_hint (greeter)) { GList * items = lightdm_user_list_get_users (lightdm_user_list_get_instance ()); for (GList * item = items; item; item = item->next) { LightDMUser *user = item->data; if( lightdm_user_get_logged_in (user)) { gtk_entry_set_text (username_entry,lightdm_user_get_name(user)); break; } } } } else if (g_strcmp0 (username, "*guest") == 0) { #ifdef HAVE_LIBLIGHTDMGOBJECT_1_19_2 lightdm_greeter_authenticate_as_guest (greeter, NULL); #else lightdm_greeter_authenticate_as_guest (greeter); #endif } else { LightDMUser *user; user = lightdm_user_list_get_user_by_name (lightdm_user_list_get_instance (), username); if (user) { if (!current_session) set_session (lightdm_user_get_session (user)); if (!current_language) set_language (lightdm_user_get_language (user)); } else { set_session (NULL); set_language (NULL); } #ifdef HAVE_LIBLIGHTDMGOBJECT_1_19_2 lightdm_greeter_authenticate (greeter, username, NULL); #else lightdm_greeter_authenticate (greeter, username); #endif } } static void cancel_authentication (void) { GtkTreeModel *model; GtkTreeIter iter; gboolean other = FALSE; if (pending_questions) { g_slist_free_full (pending_questions, (GDestroyNotify) pam_message_finalize); pending_questions = NULL; } /* If in authentication then stop that first */ cancelling = FALSE; if (lightdm_greeter_get_in_authentication (greeter)) { cancelling = TRUE; #ifdef HAVE_LIBLIGHTDMGOBJECT_1_19_2 lightdm_greeter_cancel_authentication (greeter, NULL); #else lightdm_greeter_cancel_authentication (greeter); #endif set_message_label (LIGHTDM_MESSAGE_TYPE_INFO, NULL); } /* Make sure password entry is back to normal */ gtk_entry_set_visibility (password_entry, FALSE); /* Force refreshing the prompt_box for "Other" */ model = gtk_combo_box_get_model (user_combo); if (gtk_combo_box_get_active_iter (user_combo, &iter)) { gchar *user; gtk_tree_model_get (GTK_TREE_MODEL (model), &iter, 0, &user, -1); other = (g_strcmp0 (user, "*other") == 0); g_free (user); } /* Start a new login or return to the user list */ if (other || lightdm_greeter_get_hide_users_hint (greeter)) start_authentication ("*other"); else gtk_widget_grab_focus (GTK_WIDGET (user_combo)); } static void start_session (void) { gchar *language; gchar *session; language = get_language (); if (language) #ifdef HAVE_LIBLIGHTDMGOBJECT_1_19_2 lightdm_greeter_set_language (greeter, language, NULL); #else lightdm_greeter_set_language (greeter, language); #endif g_free (language); session = get_session (); /* Remember last choice */ config_set_string (STATE_SECTION_GREETER, STATE_KEY_LAST_SESSION, session); greeter_background_save_xroot (greeter_background); if (!lightdm_greeter_start_session_sync (greeter, session, NULL)) { set_message_label (LIGHTDM_MESSAGE_TYPE_ERROR, _("Failed to start session")); start_authentication (lightdm_greeter_get_authentication_user (greeter)); } g_free (session); } gboolean password_key_press_cb (GtkWidget *widget, GdkEventKey *event, gpointer user_data); G_MODULE_EXPORT gboolean password_key_press_cb (GtkWidget *widget, GdkEventKey *event, gpointer user_data) { if ((event->keyval == GDK_KEY_Up || event->keyval == GDK_KEY_Down) && gtk_widget_get_visible (GTK_WIDGET (user_combo))) { gboolean available; GtkTreeIter iter; GtkTreeModel *model = gtk_combo_box_get_model (user_combo); /* Back to username_entry if it is available */ if (event->keyval == GDK_KEY_Up && gtk_widget_get_visible (GTK_WIDGET (username_entry)) && widget == GTK_WIDGET (password_entry)) { gtk_widget_grab_focus (GTK_WIDGET (username_entry)); return TRUE; } if (!gtk_combo_box_get_active_iter (user_combo, &iter)) return FALSE; if (event->keyval == GDK_KEY_Up) available = gtk_tree_model_iter_previous (model, &iter); else available = gtk_tree_model_iter_next (model, &iter); if (available) gtk_combo_box_set_active_iter (user_combo, &iter); return TRUE; } return FALSE; } gboolean username_focus_out_cb (GtkWidget *widget, GdkEvent *event, gpointer user_data); G_MODULE_EXPORT gboolean username_focus_out_cb (GtkWidget *widget, GdkEvent *event, gpointer user_data) { if (!g_strcmp0(gtk_entry_get_text (username_entry), "") == 0) start_authentication (gtk_entry_get_text (username_entry)); return FALSE; } gboolean username_key_press_cb (GtkWidget *widget, GdkEventKey *event, gpointer user_data); G_MODULE_EXPORT gboolean username_key_press_cb (GtkWidget *widget, GdkEventKey *event, gpointer user_data) { /* Acts as password_entry */ if (event->keyval == GDK_KEY_Up) return password_key_press_cb (widget, event, user_data); /* Enter activates the password entry */ else if (event->keyval == GDK_KEY_Return && gtk_widget_get_visible (GTK_WIDGET (password_entry))) { gtk_widget_grab_focus (GTK_WIDGET (password_entry)); return TRUE; } else return FALSE; } gboolean menubar_key_press_cb (GtkWidget *widget, GdkEventKey *event, gpointer user_data); G_MODULE_EXPORT gboolean menubar_key_press_cb (GtkWidget *widget, GdkEventKey *event, gpointer user_data) { switch (event->keyval) { case GDK_KEY_Tab: case GDK_KEY_Escape: case GDK_KEY_Super_L: case GDK_KEY_Super_R: case GDK_KEY_F9: case GDK_KEY_F10: case GDK_KEY_F11: case GDK_KEY_F12: gtk_menu_shell_cancel (GTK_MENU_SHELL (menubar)); return TRUE; default: return FALSE; }; } gboolean login_window_key_press_cb (GtkWidget *widget, GdkEventKey *event, gpointer user_data); G_MODULE_EXPORT gboolean login_window_key_press_cb (GtkWidget *widget, GdkEventKey *event, gpointer user_data) { GtkWidget *item = NULL; if (event->keyval == GDK_KEY_F9) item = session_menuitem; else if (event->keyval == GDK_KEY_F10) item = language_menuitem; else if (event->keyval == GDK_KEY_F11) item = a11y_menuitem; else if (event->keyval == GDK_KEY_F12) item = power_menuitem; else if (event->keyval != GDK_KEY_Escape && event->keyval != GDK_KEY_Super_L && event->keyval != GDK_KEY_Super_R) return FALSE; if (GTK_IS_MENU_ITEM (item) && gtk_widget_is_sensitive (item) && gtk_widget_get_visible (item)) gtk_menu_shell_select_item (GTK_MENU_SHELL (menubar), item); else gtk_menu_shell_select_first (GTK_MENU_SHELL (menubar), TRUE); return TRUE; } static void set_displayed_user (LightDMGreeter *ldm, const gchar *username) { gchar *user_tooltip; LightDMUser *user; if (g_strcmp0 (username, "*other") == 0) { gtk_widget_show (GTK_WIDGET (username_entry)); gtk_widget_show (GTK_WIDGET (cancel_button)); user_tooltip = g_strdup (_("Other")); } else { gtk_widget_hide (GTK_WIDGET (username_entry)); gtk_widget_hide (GTK_WIDGET (cancel_button)); user_tooltip = g_strdup (username); } /* At this moment we do not have information about possible prompts * for current user (except *guest). So, password_entry.visible changed in: * auth_complete_cb * process_prompts * and here - for *guest */ if (g_strcmp0 (username, "*guest") == 0) { user_tooltip = g_strdup (_("Guest Session")); gtk_widget_hide (GTK_WIDGET (password_entry)); gtk_widget_grab_focus (GTK_WIDGET (user_combo)); } set_login_button_label (ldm, username); set_user_background (username); set_user_image (username); user = lightdm_user_list_get_user_by_name (lightdm_user_list_get_instance (), username); if (user) { set_language (lightdm_user_get_language (user)); set_session (lightdm_user_get_session (user)); } else { set_language (lightdm_language_get_code (lightdm_get_language ())); set_session (lightdm_greeter_get_default_session_hint (ldm)); } gtk_widget_set_tooltip_text (GTK_WIDGET (user_combo), user_tooltip); start_authentication (username); g_free (user_tooltip); } void user_combobox_active_changed_cb (GtkComboBox *widget, LightDMGreeter *greeter); G_MODULE_EXPORT void user_combobox_active_changed_cb (GtkComboBox *widget, LightDMGreeter *ldm) { GtkTreeModel *model; GtkTreeIter iter; model = gtk_combo_box_get_model (user_combo); if (gtk_combo_box_get_active_iter (user_combo, &iter)) { gchar *user; gtk_tree_model_get (GTK_TREE_MODEL (model), &iter, 0, &user, -1); set_displayed_user (ldm, user); g_free (user); } set_message_label (LIGHTDM_MESSAGE_TYPE_INFO, NULL); } void login_cb (GtkWidget *widget); G_MODULE_EXPORT void login_cb (GtkWidget *widget) { /* Reset to default screensaver values */ if (lightdm_greeter_get_lock_hint (greeter)) XSetScreenSaver (gdk_x11_display_get_xdisplay (gdk_display_get_default ()), timeout, interval, prefer_blanking, allow_exposures); gtk_widget_set_sensitive (GTK_WIDGET (username_entry), FALSE); gtk_widget_set_sensitive (GTK_WIDGET (password_entry), FALSE); set_message_label (LIGHTDM_MESSAGE_TYPE_INFO, NULL); prompt_active = FALSE; if (lightdm_greeter_get_is_authenticated (greeter)) start_session (); else if (lightdm_greeter_get_in_authentication (greeter)) { #ifdef HAVE_LIBLIGHTDMGOBJECT_1_19_2 lightdm_greeter_respond (greeter, gtk_entry_get_text (password_entry), NULL); #else lightdm_greeter_respond (greeter, gtk_entry_get_text (password_entry)); #endif /* If we have questions pending, then we continue processing * those, until we are done. (Otherwise, authentication will * not complete.) */ if (pending_questions) process_prompts (greeter); } else start_authentication (lightdm_greeter_get_authentication_user (greeter)); } void cancel_cb (GtkWidget *widget); G_MODULE_EXPORT void cancel_cb (GtkWidget *widget) { cancel_authentication (); } gboolean user_combo_key_press_cb (GtkWidget *widget, GdkEventKey *event, gpointer user_data); G_MODULE_EXPORT gboolean user_combo_key_press_cb (GtkWidget *widget, GdkEventKey *event, gpointer user_data) { if (event->keyval == GDK_KEY_Return) { if (gtk_widget_get_visible (GTK_WIDGET (username_entry))) gtk_widget_grab_focus (GTK_WIDGET (username_entry)); else if (gtk_widget_get_visible (GTK_WIDGET (password_entry))) gtk_widget_grab_focus (GTK_WIDGET (password_entry)); else login_cb (GTK_WIDGET (login_button)); return TRUE; } return FALSE; } static void show_prompt_cb (LightDMGreeter *ldm, const gchar *text, LightDMPromptType type) { PAMConversationMessage *message_obj = g_new (PAMConversationMessage, 1); if (message_obj) { message_obj->is_prompt = TRUE; message_obj->type.prompt = type; message_obj->text = g_strdup (text); pending_questions = g_slist_append (pending_questions, message_obj); } if (!prompt_active) process_prompts (ldm); } static void show_message_cb (LightDMGreeter *ldm, const gchar *text, LightDMMessageType type) { PAMConversationMessage *message_obj = g_new (PAMConversationMessage, 1); if (message_obj) { message_obj->is_prompt = FALSE; message_obj->type.message = type; message_obj->text = g_strdup (text); pending_questions = g_slist_append (pending_questions, message_obj); } if (!prompt_active) process_prompts (ldm); } static void timed_autologin_cb (LightDMGreeter *ldm) { /* Don't trigger autologin if user locks screen with light-locker (thanks to Andrew P.). */ if (!lightdm_greeter_get_lock_hint (ldm)) { /* Select autologin-session if configured */ if (lightdm_greeter_get_hint (greeter, "autologin-session")) { set_session (lightdm_greeter_get_hint (greeter, "autologin-session")); } if (lightdm_greeter_get_is_authenticated (ldm)) { /* Configured autologin user may be already selected in user list. */ if (lightdm_greeter_get_authentication_user (ldm)) /* Selected user matches configured autologin-user option. */ start_session (); else if (lightdm_greeter_get_autologin_guest_hint (ldm)) /* "Guest session" is selected and autologin-guest is enabled. */ start_session (); else if (lightdm_greeter_get_autologin_user_hint (ldm)) { /* "Guest session" is selected, but autologin-user is configured. */ start_authentication (lightdm_greeter_get_autologin_user_hint (ldm)); prompted = TRUE; } } else #ifdef HAVE_LIBLIGHTDMGOBJECT_1_19_2 lightdm_greeter_authenticate_autologin (ldm, NULL); #else lightdm_greeter_authenticate_autologin (ldm); #endif } } static void authentication_complete_cb (LightDMGreeter *ldm) { prompt_active = FALSE; gtk_entry_set_text (password_entry, ""); if (cancelling) { cancel_authentication (); return; } if (pending_questions) { g_slist_free_full (pending_questions, (GDestroyNotify) pam_message_finalize); pending_questions = NULL; } if (lightdm_greeter_get_is_authenticated (ldm)) { if (prompted) start_session (); else { gtk_widget_hide (GTK_WIDGET (password_entry)); gtk_widget_grab_focus (GTK_WIDGET (user_combo)); } } else { /* If an error message is already printed we do not print it this statement * The error message probably comes from the PAM module that has a better knowledge * of the failure. */ gboolean have_pam_error = !message_label_is_empty () && gtk_info_bar_get_message_type (info_bar) != GTK_MESSAGE_ERROR; if (prompted) { if (!have_pam_error) set_message_label (LIGHTDM_MESSAGE_TYPE_ERROR, _("Incorrect password, please try again")); start_authentication (lightdm_greeter_get_authentication_user (ldm)); } else { g_warning ("Failed to authenticate"); if (!have_pam_error) set_message_label (LIGHTDM_MESSAGE_TYPE_ERROR, _("Failed to authenticate")); } } } static void user_added_cb (LightDMUserList *user_list, LightDMUser *user, LightDMGreeter *ldm) { GtkTreeModel *model; GtkTreeIter iter; gboolean logged_in = FALSE; model = gtk_combo_box_get_model (user_combo); logged_in = lightdm_user_get_logged_in (user); gtk_list_store_append (GTK_LIST_STORE (model), &iter); gtk_list_store_set (GTK_LIST_STORE (model), &iter, 0, lightdm_user_get_name (user), 1, lightdm_user_get_display_name (user), 2, logged_in ? PANGO_WEIGHT_BOLD : PANGO_WEIGHT_NORMAL, -1); } static gboolean get_user_iter (const gchar *username, GtkTreeIter *iter) { GtkTreeModel *model; model = gtk_combo_box_get_model (user_combo); if (!gtk_tree_model_get_iter_first (model, iter)) return FALSE; do { gchar *name; gboolean matched; gtk_tree_model_get (model, iter, 0, &name, -1); matched = g_strcmp0 (name, username) == 0; g_free (name); if (matched) return TRUE; } while (gtk_tree_model_iter_next (model, iter)); return FALSE; } static void user_changed_cb (LightDMUserList *user_list, LightDMUser *user, LightDMGreeter *ldm) { GtkTreeModel *model; GtkTreeIter iter; gboolean logged_in = FALSE; if (!get_user_iter (lightdm_user_get_name (user), &iter)) return; logged_in = lightdm_user_get_logged_in (user); model = gtk_combo_box_get_model (user_combo); gtk_list_store_set (GTK_LIST_STORE (model), &iter, 0, lightdm_user_get_name (user), 1, lightdm_user_get_display_name (user), 2, logged_in ? PANGO_WEIGHT_BOLD : PANGO_WEIGHT_NORMAL, -1); } static void user_removed_cb (LightDMUserList *user_list, LightDMUser *user) { GtkTreeModel *model; GtkTreeIter iter; if (!get_user_iter (lightdm_user_get_name (user), &iter)) return; model = gtk_combo_box_get_model (user_combo); gtk_list_store_remove (GTK_LIST_STORE (model), &iter); } static void load_user_list (void) { GtkTreeModel *model; GtkTreeIter iter; const GList *items; const GList *item; const gchar *selected_user; gchar *last_user; gboolean logged_in = FALSE; g_signal_connect (lightdm_user_list_get_instance (), "user-added", G_CALLBACK (user_added_cb), greeter); g_signal_connect (lightdm_user_list_get_instance (), "user-changed", G_CALLBACK (user_changed_cb), greeter); g_signal_connect (lightdm_user_list_get_instance (), "user-removed", G_CALLBACK (user_removed_cb), NULL); model = gtk_combo_box_get_model (user_combo); items = lightdm_user_list_get_users (lightdm_user_list_get_instance ()); for (item = items; item; item = item->next) { LightDMUser *user = item->data; logged_in = lightdm_user_get_logged_in (user); gtk_list_store_append (GTK_LIST_STORE (model), &iter); gtk_list_store_set (GTK_LIST_STORE (model), &iter, 0, lightdm_user_get_name (user), 1, lightdm_user_get_display_name (user), 2, logged_in ? PANGO_WEIGHT_BOLD : PANGO_WEIGHT_NORMAL, -1); } if (lightdm_greeter_get_has_guest_account_hint (greeter)) { gtk_list_store_append (GTK_LIST_STORE (model), &iter); gtk_list_store_set (GTK_LIST_STORE (model), &iter, 0, "*guest", 1, _("Guest Session"), 2, PANGO_WEIGHT_NORMAL, -1); } gtk_list_store_append (GTK_LIST_STORE (model), &iter); gtk_list_store_set (GTK_LIST_STORE (model), &iter, 0, "*other", 1, _("Other..."), 2, PANGO_WEIGHT_NORMAL, -1); last_user = config_get_string (STATE_SECTION_GREETER, STATE_KEY_LAST_USER, NULL); if (lightdm_greeter_get_select_user_hint (greeter)) selected_user = lightdm_greeter_get_select_user_hint (greeter); else if (lightdm_greeter_get_select_guest_hint (greeter)) selected_user = "*guest"; else if (last_user) selected_user = last_user; else selected_user = NULL; if (gtk_tree_model_get_iter_first (model, &iter)) { gchar *name; gboolean matched = FALSE; if (selected_user) { do { gtk_tree_model_get (model, &iter, 0, &name, -1); matched = g_strcmp0 (name, selected_user) == 0; g_free (name); if (matched) { gtk_combo_box_set_active_iter (user_combo, &iter); set_displayed_user (greeter, selected_user); break; } } while (gtk_tree_model_iter_next (model, &iter)); } if (!matched) { gtk_tree_model_get_iter_first (model, &iter); gtk_tree_model_get (model, &iter, 0, &name, -1); gtk_combo_box_set_active_iter (user_combo, &iter); set_displayed_user (greeter, name); g_free (name); } } g_free (last_user); } static GdkFilterReturn wm_window_filter (GdkXEvent *gxevent, GdkEvent *event, gpointer data) { XEvent *xevent = (XEvent*)gxevent; if (xevent->type == MapNotify) { GdkDisplay *display = gdk_x11_lookup_xdisplay (xevent->xmap.display); GdkWindow *win = gdk_x11_window_foreign_new_for_display (display, xevent->xmap.window); GdkWindowTypeHint win_type = gdk_window_get_type_hint (win); if (win_type != GDK_WINDOW_TYPE_HINT_COMBO && win_type != GDK_WINDOW_TYPE_HINT_TOOLTIP && win_type != GDK_WINDOW_TYPE_HINT_NOTIFICATION) /* if (win_type == GDK_WINDOW_TYPE_HINT_DESKTOP || win_type == GDK_WINDOW_TYPE_HINT_DIALOG) */ gdk_window_focus (win, GDK_CURRENT_TIME); } else if (xevent->type == UnmapNotify) { Window xwin; int revert_to = RevertToNone; XGetInputFocus (xevent->xunmap.display, &xwin, &revert_to); if (revert_to == RevertToNone) gdk_window_lower (gtk_widget_get_window (gtk_widget_get_toplevel (GTK_WIDGET (screen_overlay)))); } return GDK_FILTER_CONTINUE; } static void debug_log_handler (const gchar *log_domain, GLogLevelFlags log_level, const gchar *message, gpointer user_data) { gchar *new_domain = NULL; if (log_level == G_LOG_LEVEL_DEBUG) { log_level = G_LOG_LEVEL_MESSAGE; if (log_domain) log_domain = new_domain = g_strdup_printf ("DEBUG/%s", log_domain); else log_domain = "DEBUG"; } g_log_default_handler (log_domain, log_level, message, user_data); g_free (new_domain); } int main (int argc, char **argv) { GtkBuilder *builder; GdkWindow *root_window; GtkWidget *image; GError *error = NULL; const GList *items; const GList *item; GList *menubar_items; gchar **config_groups; gchar **config_group; gchar **a11y_states; gchar *value; GtkCssProvider *css_provider; GdkRGBA lightdm_gtk_greeter_override_defaults; guint fallback_css_priority = GTK_STYLE_PROVIDER_PRIORITY_APPLICATION; GtkIconTheme *icon_theme; /* Prevent memory from being swapped out, as we are dealing with passwords */ mlockall (MCL_CURRENT | MCL_FUTURE); g_message ("Starting %s (%s, %s)", PACKAGE_STRING, __DATE__, __TIME__); /* Disable global menus */ g_unsetenv ("UBUNTU_MENUPROXY"); /* LP: #1024482 */ g_setenv ("GDK_CORE_DEVICE_EVENTS", "1", TRUE); /* Initialize i18n */ setlocale (LC_ALL, ""); bindtextdomain (GETTEXT_PACKAGE, LOCALEDIR); bind_textdomain_codeset (GETTEXT_PACKAGE, "UTF-8"); textdomain (GETTEXT_PACKAGE); g_unix_signal_add (SIGTERM, (GSourceFunc)sigterm_cb, /* is_callback */ GINT_TO_POINTER (TRUE)); default_user_icon = g_strdup("avatar-default"); config_init (); if (config_get_bool (NULL, CONFIG_KEY_DEBUGGING, FALSE)) g_log_set_default_handler (debug_log_handler, NULL); /* init gtk */ gtk_init (&argc, &argv); /* Disabling GtkInspector shortcuts. It is still possible to run GtkInspector with GTK_DEBUG=interactive. Assume that user knows what he's doing. */ if (!config_get_bool (NULL, CONFIG_KEY_DEBUGGING, FALSE)) { GtkWidget *fake_window = gtk_window_new (GTK_WINDOW_TOPLEVEL); GtkBindingSet *set = gtk_binding_set_by_class (G_OBJECT_GET_CLASS (fake_window)); GtkBindingEntry *entry = NULL; GtkBindingSignal *signals = NULL; GSList *bindings = NULL; GSList *iter; for (entry = set->entries; entry; entry = entry->set_next) { for (signals = entry->signals; signals; signals = signals->next) { if (g_strcmp0 (signals->signal_name, "enable-debugging") == 0) { bindings = g_slist_prepend (bindings, entry); break; } } } for (iter = bindings; iter; iter = g_slist_next (iter)) { entry = iter->data; gtk_binding_entry_remove (set, entry->keyval, entry->modifiers); } g_slist_free (bindings); gtk_widget_destroy (fake_window); } #ifdef HAVE_LIBIDO g_debug ("Initializing IDO library"); ido_init (); #endif greeter = lightdm_greeter_new (); g_signal_connect (greeter, "show-prompt", G_CALLBACK (show_prompt_cb), NULL); g_signal_connect (greeter, "show-message", G_CALLBACK (show_message_cb), NULL); g_signal_connect (greeter, "authentication-complete", G_CALLBACK (authentication_complete_cb), NULL); g_signal_connect (greeter, "autologin-timer-expired", G_CALLBACK (timed_autologin_cb), NULL); if (!lightdm_greeter_connect_sync (greeter, NULL)) return EXIT_FAILURE; /* Set default cursor */ gdk_window_set_cursor (gdk_get_default_root_window (), gdk_cursor_new_for_display (gdk_display_get_default (), GDK_LEFT_PTR)); /* Make the greeter behave a bit more like a screensaver if used as un/lock-screen by blanking the screen */ if (lightdm_greeter_get_lock_hint (greeter)) { Display *display = gdk_x11_display_get_xdisplay (gdk_display_get_default ()); XGetScreenSaver (display, &timeout, &interval, &prefer_blanking, &allow_exposures); XForceScreenSaver (display, ScreenSaverActive); XSetScreenSaver (display, config_get_int (NULL, CONFIG_KEY_SCREENSAVER_TIMEOUT, 60), 0, ScreenSaverActive, DefaultExposures); } /* Set GTK+ settings */ value = config_get_string (NULL, CONFIG_KEY_THEME, NULL); if (value) { g_debug ("[Configuration] Changing GTK+ theme to '%s'", value); g_object_set (gtk_settings_get_default (), "gtk-theme-name", value, NULL); g_free (value); } g_object_get (gtk_settings_get_default (), "gtk-theme-name", &default_theme_name, NULL); g_debug ("[Configuration] GTK+ theme: '%s'", default_theme_name); value = config_get_string (NULL, CONFIG_KEY_ICON_THEME, NULL); if (value) { g_debug ("[Configuration] Changing icons theme to '%s'", value); g_object_set (gtk_settings_get_default (), "gtk-icon-theme-name", value, NULL); g_free (value); } g_object_get (gtk_settings_get_default (), "gtk-icon-theme-name", &default_icon_theme_name, NULL); g_debug ("[Configuration] Icons theme: '%s'", default_icon_theme_name); value = config_get_string (NULL, CONFIG_KEY_CURSOR_THEME, NULL); if (value) { g_debug ("[Configuration] Changing cursor theme to '%s'", value); g_object_set (gtk_settings_get_default (), "gtk-cursor-theme-name", value, NULL); g_free (value); } g_object_get (gtk_settings_get_default (), "gtk-cursor-theme-name", &default_cursor_theme_name, NULL); g_debug ("[Configuration] Cursor theme: '%s'", default_cursor_theme_name); if (config_has_key(NULL, CONFIG_KEY_CURSOR_THEME_SIZE)) { g_object_set (gtk_settings_get_default (), "gtk-cursor-theme-size", config_get_int (NULL, CONFIG_KEY_CURSOR_THEME_SIZE, 16), NULL); } value = config_get_string (NULL, CONFIG_KEY_FONT, "Sans 10"); if (value) { g_debug ("[Configuration] Changing font to '%s'", value); g_object_set (gtk_settings_get_default (), "gtk-font-name", value, NULL); g_free (value); } g_object_get (gtk_settings_get_default (), "gtk-font-name", &default_font_name, NULL); g_debug ("[Configuration] Font: '%s'", default_font_name); if (config_has_key (NULL, CONFIG_KEY_DPI)) g_object_set (gtk_settings_get_default (), "gtk-xft-dpi", 1024*config_get_int (NULL, CONFIG_KEY_DPI, 96), NULL); if (config_has_key (NULL, CONFIG_KEY_ANTIALIAS)) g_object_set (gtk_settings_get_default (), "gtk-xft-antialias", config_get_bool (NULL, CONFIG_KEY_ANTIALIAS, FALSE), NULL); value = config_get_string (NULL, CONFIG_KEY_HINT_STYLE, NULL); if (value) { g_object_set (gtk_settings_get_default (), "gtk-xft-hintstyle", value, NULL); g_free (value); } value = config_get_string (NULL, CONFIG_KEY_RGBA, NULL); if (value) { g_object_set (gtk_settings_get_default (), "gtk-xft-rgba", value, NULL); g_free (value); } #ifdef AT_SPI_COMMAND if (config_has_key (NULL, CONFIG_KEY_AT_SPI_ENABLED) && config_get_bool (NULL, CONFIG_KEY_AT_SPI_ENABLED, TRUE) == FALSE) { // AT_SPI is user-disabled } else { spawn_line_pid (AT_SPI_COMMAND, G_SPAWN_SEARCH_PATH, NULL); } #endif #ifdef INDICATOR_SERVICES_COMMAND spawn_line_pid (INDICATOR_SERVICES_COMMAND, G_SPAWN_SEARCH_PATH, NULL); #endif builder = gtk_builder_new (); if (!gtk_builder_add_from_string (builder, lightdm_gtk_greeter_ui, lightdm_gtk_greeter_ui_length, &error)) { g_warning ("Error loading UI: %s", error->message); return EXIT_FAILURE; } g_clear_error (&error); /* Screen window */ screen_overlay = GTK_OVERLAY (gtk_builder_get_object (builder, "screen_overlay")); screen_overlay_child = GTK_WIDGET (gtk_builder_get_object (builder, "screen_overlay_child")); /* Login window */ login_window = GTK_WIDGET (gtk_builder_get_object (builder, "login_window")); user_image = GTK_IMAGE (gtk_builder_get_object (builder, "user_image")); user_combo = GTK_COMBO_BOX (gtk_builder_get_object (builder, "user_combobox")); username_entry = GTK_ENTRY (gtk_builder_get_object (builder, "username_entry")); password_entry = GTK_ENTRY (gtk_builder_get_object (builder, "password_entry")); info_bar = GTK_INFO_BAR (gtk_builder_get_object (builder, "greeter_infobar")); message_label = GTK_LABEL (gtk_builder_get_object (builder, "message_label")); cancel_button = GTK_BUTTON (gtk_builder_get_object (builder, "cancel_button")); login_button = GTK_BUTTON (gtk_builder_get_object (builder, "login_button")); /* Panel window*/ panel_window = GTK_WIDGET (gtk_builder_get_object (builder, "panel_window")); menubar = GTK_WIDGET (gtk_builder_get_object (builder, "menubar")); session_menuitem = GTK_WIDGET (gtk_builder_get_object (builder, "session_menuitem")); session_menu = GTK_MENU (gtk_builder_get_object (builder, "session_menu")); language_menuitem = GTK_WIDGET (gtk_builder_get_object (builder, "language_menuitem")); language_menu = GTK_MENU (gtk_builder_get_object (builder, "language_menu")); a11y_menuitem = GTK_WIDGET (gtk_builder_get_object (builder, "a11y_menuitem")); contrast_menuitem = GTK_WIDGET (gtk_builder_get_object (builder, "high_contrast_menuitem")); font_menuitem = GTK_WIDGET (gtk_builder_get_object (builder, "large_font_menuitem")); keyboard_menuitem = GTK_WIDGET (gtk_builder_get_object (builder, "keyboard_menuitem")); reader_menuitem = GTK_WIDGET (gtk_builder_get_object (builder, "reader_menuitem")); power_menuitem = GTK_WIDGET (gtk_builder_get_object (builder, "power_menuitem")); layout_menuitem = GTK_WIDGET (gtk_builder_get_object (builder, "layout_menuitem")); layout_menu = GTK_MENU (gtk_builder_get_object (builder, "layout_menu")); clock_menuitem = GTK_WIDGET (gtk_builder_get_object (builder, "clock_menuitem")); host_menuitem = GTK_WIDGET (gtk_builder_get_object (builder, "host_menuitem")); /* Power dialog */ power_window = GTK_WIDGET (gtk_builder_get_object (builder, "power_window")); power_ok_button = GTK_BUTTON (gtk_builder_get_object (builder, "power_ok_button")); power_cancel_button = GTK_BUTTON (gtk_builder_get_object (builder, "power_cancel_button")); power_title = GTK_LABEL (gtk_builder_get_object (builder, "power_title")); power_text = GTK_LABEL (gtk_builder_get_object (builder, "power_text")); power_icon = GTK_IMAGE (gtk_builder_get_object (builder, "power_icon")); gtk_overlay_add_overlay (screen_overlay, login_window); gtk_overlay_add_overlay (screen_overlay, panel_window); gtk_overlay_add_overlay (screen_overlay, power_window); gtk_accel_map_add_entry ("/a11y/font", GDK_KEY_F1, 0); gtk_accel_map_add_entry ("/a11y/contrast", GDK_KEY_F2, 0); gtk_accel_map_add_entry ("/a11y/keyboard", GDK_KEY_F3, 0); gtk_accel_map_add_entry ("/a11y/reader", GDK_KEY_F4, 0); gtk_accel_map_add_entry ("/power/shutdown", GDK_KEY_F4, GDK_MOD1_MASK); init_indicators (); /* https://bugzilla.gnome.org/show_bug.cgi?id=710888 > GtkInfoBar not shown after calling gtk_widget_show Assume they will fix it someday. */ if (gtk_get_major_version () == 3 && gtk_get_minor_version () < 18) { GList *children = gtk_container_get_children (GTK_CONTAINER (info_bar)); if (g_list_length (children) == 1 && GTK_IS_REVEALER (children->data)) g_signal_connect_after(children->data, "notify::child-revealed", (GCallback)infobar_revealed_cb_710888, NULL); g_list_free (children); } /* Hide empty panel */ menubar_items = gtk_container_get_children (GTK_CONTAINER (menubar)); if (!menubar_items) gtk_widget_hide (GTK_WIDGET (panel_window)); else g_list_free (menubar_items); if (config_get_bool (NULL, CONFIG_KEY_HIDE_USER_IMAGE, FALSE)) { gtk_widget_hide (GTK_WIDGET (gtk_builder_get_object (builder, "user_image_border"))); gtk_widget_hide (GTK_WIDGET (user_image)); /* Hide to mark image is disabled */ gtk_widget_set_size_request (GTK_WIDGET (user_combo), 250, -1); } else { value = config_get_string (NULL, CONFIG_KEY_DEFAULT_USER_IMAGE, NULL); if (value) { if (value[0] == '#') { g_free (default_user_icon); default_user_icon = g_strdup (value + 1); } else { default_user_pixbuf = gdk_pixbuf_new_from_file_at_scale (value, 80, 80, FALSE, &error); if (!default_user_pixbuf) { g_warning ("Failed to load default user image: %s", error->message); g_clear_error (&error); } } g_free (value); } } icon_theme = gtk_icon_theme_get_default (); /* Session menu */ if (gtk_widget_get_visible (session_menuitem)) { GSList *sessions = NULL; if (gtk_icon_theme_has_icon (icon_theme, "document-properties-symbolic")) session_badge = gtk_image_new_from_icon_name ("document-properties-symbolic", GTK_ICON_SIZE_MENU); else session_badge = gtk_image_new_from_icon_name ("document-properties", GTK_ICON_SIZE_MENU); gtk_widget_show (session_badge); gtk_container_add (GTK_CONTAINER (session_menuitem), session_badge); items = lightdm_get_sessions (); for (item = items; item; item = item->next) { LightDMSession *session = item->data; GtkWidget *radiomenuitem; radiomenuitem = gtk_radio_menu_item_new_with_label (sessions, lightdm_session_get_name (session)); g_object_set_data (G_OBJECT (radiomenuitem), SESSION_DATA_KEY, (gpointer) lightdm_session_get_key (session)); sessions = gtk_radio_menu_item_get_group (GTK_RADIO_MENU_ITEM (radiomenuitem)); g_signal_connect (G_OBJECT (radiomenuitem), "activate", G_CALLBACK (session_selected_cb), NULL); gtk_menu_shell_append (GTK_MENU_SHELL (session_menu), radiomenuitem); gtk_widget_show (GTK_WIDGET (radiomenuitem)); } set_session (NULL); } /* Language menu */ if (gtk_widget_get_visible (language_menuitem)) { GSList *languages = NULL; gchar *modifier; items = lightdm_get_languages (); for (item = items; item; item = item->next) { LightDMLanguage *language = item->data; const gchar *country, *code; gchar *label; GtkWidget *radiomenuitem; country = lightdm_language_get_territory (language); if (country) label = g_strdup_printf ("%s - %s", lightdm_language_get_name (language), country); else label = g_strdup (lightdm_language_get_name (language)); code = lightdm_language_get_code (language); modifier = strchr (code, '@'); if (modifier != NULL) { gchar *label_new = g_strdup_printf ("%s [%s]", label, modifier+1); g_free (label); label = label_new; } radiomenuitem = gtk_radio_menu_item_new_with_label (languages, label); g_object_set_data (G_OBJECT (radiomenuitem), LANGUAGE_DATA_CODE, (gpointer) code); languages = gtk_radio_menu_item_get_group (GTK_RADIO_MENU_ITEM (radiomenuitem)); g_signal_connect (G_OBJECT (radiomenuitem), "activate", G_CALLBACK (language_selected_cb), NULL); gtk_menu_shell_append (GTK_MENU_SHELL (language_menu), radiomenuitem); gtk_widget_show (GTK_WIDGET (radiomenuitem)); } set_language (NULL); } /* a11y menu */ if (gtk_widget_get_visible (a11y_menuitem)) { if (gtk_icon_theme_has_icon (icon_theme, "preferences-desktop-accessibility-symbolic")) image = gtk_image_new_from_icon_name ("preferences-desktop-accessibility-symbolic", GTK_ICON_SIZE_MENU); else image = gtk_image_new_from_icon_name ("preferences-desktop-accessibility", GTK_ICON_SIZE_MENU); gtk_widget_show (image); gtk_container_add (GTK_CONTAINER (a11y_menuitem), image); } value = config_get_string (NULL, CONFIG_KEY_KEYBOARD, NULL); if (value) { a11y_keyboard_command = menu_command_parse_extended ("keyboard", value, keyboard_menuitem, "onboard", "--xid"); g_free (value); } gtk_widget_set_visible (keyboard_menuitem, a11y_keyboard_command != NULL); value = config_get_string (NULL, CONFIG_KEY_READER, NULL); if (value) { a11y_reader_command = menu_command_parse ("reader", value, reader_menuitem); g_free (value); } gtk_widget_set_visible (reader_menuitem, a11y_reader_command != NULL); /* Power menu */ if (gtk_widget_get_visible (power_menuitem)) { if (gtk_icon_theme_has_icon (icon_theme, "system-shutdown-symbolic")) image = gtk_image_new_from_icon_name ("system-shutdown-symbolic", GTK_ICON_SIZE_MENU); else image = gtk_image_new_from_icon_name ("system-shutdown", GTK_ICON_SIZE_MENU); gtk_widget_show (image); gtk_container_add (GTK_CONTAINER (power_menuitem), image); suspend_menuitem = (GTK_WIDGET (gtk_builder_get_object (builder, "suspend_menuitem"))); hibernate_menuitem = (GTK_WIDGET (gtk_builder_get_object (builder, "hibernate_menuitem"))); restart_menuitem = (GTK_WIDGET (gtk_builder_get_object (builder, "restart_menuitem"))); shutdown_menuitem = (GTK_WIDGET (gtk_builder_get_object (builder, "shutdown_menuitem"))); g_signal_connect (G_OBJECT (power_menuitem),"activate", G_CALLBACK (power_menu_cb), NULL); } /* Layout menu */ if (gtk_widget_get_visible (layout_menuitem)) { #ifdef HAVE_LIBXKLAVIER xkl_engine = xkl_engine_get_instance (XOpenDisplay (NULL)); if (xkl_engine) { xkl_engine_start_listen (xkl_engine, XKLL_TRACK_KEYBOARD_STATE); g_signal_connect (xkl_engine, "X-state-changed", G_CALLBACK (xkl_state_changed_cb), NULL); g_signal_connect (xkl_engine, "X-config-changed", G_CALLBACK (xkl_config_changed_cb), NULL); gdk_window_add_filter (NULL, (GdkFilterFunc) xkl_xevent_filter, NULL); /* refresh */ XklConfigRec *config_rec = xkl_config_rec_new (); if (xkl_config_rec_get_from_server (config_rec, xkl_engine)) xkl_config_rec_activate (config_rec, xkl_engine); g_object_unref (config_rec); } else { g_warning ("Failed to get XklEngine instance"); gtk_widget_hide (layout_menuitem); } #endif update_layouts_menu (); update_layouts_menu_state (); } /* Host label */ if (gtk_widget_get_visible (host_menuitem)) gtk_menu_item_set_label (GTK_MENU_ITEM (host_menuitem), lightdm_get_hostname ()); /* Clock label */ if (gtk_widget_get_visible (clock_menuitem)) { gtk_menu_item_set_label (GTK_MENU_ITEM (clock_menuitem), ""); clock_label = gtk_bin_get_child (GTK_BIN (clock_menuitem)); clock_format = config_get_string (NULL, CONFIG_KEY_CLOCK_FORMAT, "%a, %H:%M"); clock_timeout_thread (); gdk_threads_add_timeout (1000, (GSourceFunc) clock_timeout_thread, NULL); } /* A bit of CSS */ css_provider = gtk_css_provider_new (); gtk_css_provider_load_from_data (css_provider, lightdm_gtk_greeter_css_application, lightdm_gtk_greeter_css_application_length, NULL); gtk_style_context_add_provider_for_screen (gdk_screen_get_default (), GTK_STYLE_PROVIDER (css_provider), GTK_STYLE_PROVIDER_PRIORITY_APPLICATION); css_provider = gtk_css_provider_new (); if (gtk_style_context_lookup_color (gtk_widget_get_style_context (GTK_WIDGET (login_window)), "lightdm-gtk-greeter-override-defaults", &lightdm_gtk_greeter_override_defaults)) fallback_css_priority = GTK_STYLE_PROVIDER_PRIORITY_FALLBACK; gtk_css_provider_load_from_data (css_provider, lightdm_gtk_greeter_css_fallback, lightdm_gtk_greeter_css_fallback_length, NULL); gtk_style_context_add_provider_for_screen (gdk_screen_get_default (), GTK_STYLE_PROVIDER (css_provider), fallback_css_priority); /* Background */ greeter_background = greeter_background_new (GTK_WIDGET (screen_overlay)); value = config_get_string (NULL, CONFIG_KEY_ACTIVE_MONITOR, NULL); greeter_background_set_active_monitor_config (greeter_background, value ? value : "#cursor"); g_free (value); read_monitor_configuration (CONFIG_GROUP_DEFAULT, GREETER_BACKGROUND_DEFAULT); config_groups = config_get_groups (CONFIG_GROUP_MONITOR); for (config_group = config_groups; *config_group; ++config_group) { const gchar *name = *config_group + sizeof (CONFIG_GROUP_MONITOR); while (*name && g_ascii_isspace (*name)) ++name; read_monitor_configuration (*config_group, name); } g_strfreev (config_groups); greeter_background_add_accel_group (greeter_background, GTK_ACCEL_GROUP (gtk_builder_get_object (builder, "a11y_accelgroup"))); greeter_background_add_accel_group (greeter_background, GTK_ACCEL_GROUP (gtk_builder_get_object (builder, "power_accelgroup"))); greeter_background_connect (greeter_background, gdk_screen_get_default ()); if (lightdm_greeter_get_hide_users_hint (greeter)) { set_user_image (NULL); start_authentication ("*other"); } else { load_user_list (); gtk_widget_hide (GTK_WIDGET (cancel_button)); gtk_widget_show (GTK_WIDGET (user_combo)); } /* Windows positions */ value = config_get_string (NULL, CONFIG_KEY_POSITION, NULL); g_object_set_data_full (G_OBJECT (login_window), WINDOW_DATA_POSITION, str_to_position (value, &WINDOW_POS_CENTER), g_free); g_free (value); gtk_widget_set_valign (panel_window, config_get_enum (NULL, CONFIG_KEY_PANEL_POSITION, GTK_ALIGN_START, "bottom", GTK_ALIGN_END, "top", GTK_ALIGN_START, NULL)); if (a11y_keyboard_command) { value = config_get_string (NULL, CONFIG_KEY_KEYBOARD_POSITION, NULL); g_object_set_data_full (G_OBJECT (a11y_keyboard_command->widget), WINDOW_DATA_POSITION, str_to_position (value, &KEYBOARD_POSITION), g_free); g_free (value); } gtk_builder_connect_signals (builder, greeter); a11y_states = config_get_string_list (NULL, CONFIG_KEY_A11Y_STATES, NULL); if (a11y_states && *a11y_states) { gpointer a11y_item; gchar **values_iter; GHashTable *a11y_items = g_hash_table_new_full (g_str_hash, g_str_equal, (GDestroyNotify)g_free, NULL); g_hash_table_insert (a11y_items, g_strdup("contrast"), contrast_menuitem); g_hash_table_insert (a11y_items, g_strdup("font"), font_menuitem); g_hash_table_insert (a11y_items, g_strdup("keyboard"), keyboard_menuitem); g_hash_table_insert (a11y_items, g_strdup("reader"), reader_menuitem); for (values_iter = a11y_states; *values_iter; ++values_iter) { value = *values_iter; switch (value[0]) { case '-': continue; case '+': if (g_hash_table_lookup_extended (a11y_items, &value[1], NULL, &a11y_item) && gtk_widget_get_visible (GTK_WIDGET (a11y_item))) gtk_check_menu_item_set_active (GTK_CHECK_MENU_ITEM (a11y_item), TRUE); break; default: if (g_hash_table_lookup_extended (a11y_items, value, NULL, &a11y_item) && gtk_widget_get_visible (GTK_WIDGET (a11y_item))) { gtk_check_menu_item_set_active (GTK_CHECK_MENU_ITEM (a11y_item), config_get_bool (STATE_SECTION_A11Y, value, FALSE)); g_signal_connect (G_OBJECT (a11y_item), "toggled", G_CALLBACK (a11y_menuitem_toggled_cb), g_strdup (value)); } } } g_hash_table_unref (a11y_items); } g_strfreev (a11y_states); /* There is no window manager, so we need to implement some of its functionality */ root_window = gdk_get_default_root_window (); gdk_window_set_events (root_window, gdk_window_get_events (root_window) | GDK_SUBSTRUCTURE_MASK); gdk_window_add_filter (root_window, wm_window_filter, NULL); gtk_widget_show (GTK_WIDGET (screen_overlay)); g_debug ("Run Gtk loop..."); gtk_main (); g_debug ("Gtk loop exits"); sigterm_cb (/* is_callback */ GINT_TO_POINTER (FALSE)); { Display *display = gdk_x11_display_get_xdisplay (gdk_display_get_default ()); int screen = XDefaultScreen (display); Window w = RootWindow (display, screen); Atom id = XInternAtom (display, "AT_SPI_BUS", True); if (id != None) { XDeleteProperty (display, w, id); XSync (display, FALSE); } } return EXIT_SUCCESS; } lightdm-gtk-greeter-2.0.5/src/lightdm-gtk-greeter-css-fallback.h0000664000175000017500000000173013253544623026521 0ustar00bluesabrebluesabre00000000000000/* automatically generated from lightdm-gtk-greeter-fallback.css */ #ifdef __SUNPRO_C #pragma align 4 (lightdm_gtk_greeter_css_fallback) #endif #ifdef __GNUC__ static const char lightdm_gtk_greeter_css_fallback[] __attribute__ ((__aligned__ (4))) = #else static const char lightdm_gtk_greeter_css_fallback[] = #endif { "#layout_menuitem>GtkLabel\n{\n border: 1px solid alpha(@menu_fg_colo" "r, 0.8);\n border-radius: 0.5em;\n padding: 0px 0.25em;\n back" "ground: alpha(@menu_fg_color, 0.2);\n}\n\n#layout_menuitem\n{\n padd" "ing: 1px;\n}\n\n/* Make sure the GtkSeparatorMenuItems don\'t alter the" " overall panel/menubar background */\n#panel_window menubar > separator" " { background: transparent; }\n/* Workaround for Adwaita - and other th" "emes - setting a smaller font for the keycap window */\n#login_window.k" "eycap, #power_window.keycap { font-size: initial; }\n" }; static const unsigned lightdm_gtk_greeter_css_fallback_length = 532u; lightdm-gtk-greeter-2.0.5/src/greetermenubar.h0000664000175000017500000000255613252333053023336 0ustar00bluesabrebluesabre00000000000000/* * Copyright (C) 2014, Andrew P. * * This program is free software: you can redistribute it and/or modify it under * the terms of the GNU General Public License as published by the Free Software * Foundation, either version 3 of the License, or (at your option) any later * version. See http://www.gnu.org/copyleft/gpl.html the full text of the * license. */ #ifndef GREETER_MENU_BAR_H #define GREETER_MENU_BAR_H #include #include G_BEGIN_DECLS #define GREETER_MENU_BAR_TYPE (greeter_menu_bar_get_type()) #define GREETER_MENU_BAR(obj) (G_TYPE_CHECK_INSTANCE_CAST((obj), GREETER_MENU_BAR_TYPE, GreeterMenuBar)) #define GREETER_MENU_BAR_CLASS(klass) (G_TYPE_CHECK_CLASS_CAST((klass), GREETER_MENU_BAR_TYPE, GreeterMenuBarClass)) #define GREETER_IS_MENU_BAR(obj) (G_TYPE_CHECK_INSTANCE_TYPE((obj), GREETER_MENU_BAR_TYPE)) #define GREETER_IS_MENU_BAR_CLASS(klass) (G_TYPE_CHECK_CLASS_TYPE((klass), GREETER_MENU_BAR_TYPE)) typedef struct _GreeterMenuBar GreeterMenuBar; typedef struct _GreeterMenuBarClass GreeterMenuBarClass; struct _GreeterMenuBar { GtkMenuBar parent_instance; }; struct _GreeterMenuBarClass { GtkMenuBarClass parent_class; }; GType greeter_menu_bar_get_type(void) G_GNUC_CONST; GtkWidget *greeter_menu_bar_new(void); G_END_DECLS #endif /* GREETER_MENU_BAR_H */ lightdm-gtk-greeter-2.0.5/src/lightdm-gtk-greeter-ui.h0000664000175000017500000005233113253544623024614 0ustar00bluesabrebluesabre00000000000000/* automatically generated from lightdm-gtk-greeter.glade */ #ifdef __SUNPRO_C #pragma align 4 (lightdm_gtk_greeter_ui) #endif #ifdef __GNUC__ static const char lightdm_gtk_greeter_ui[] __attribute__ ((__aligned__ (4))) = #else static const char lightdm_gtk_greeter_ui[] = #endif { "panel_window<" "property name=\"visible\">TrueF" "alsestartmenuba" "rTrueFalsertlpower_menuitemTrueFalseTrueFalse" "power_accelgroupTrueFalseSuspend" "" "True" "FalseHibernate" "TrueFalseRestart...False" "TrueFalse<Login>/" "power/shutdown" "Shut Down...a11y_menuitemTrueFalse" "T" "rueFalsea11y_accelgroupFalseTrue" "False<Login>/a11y/fontLarge FontFalseTrueFalse<Login>/a11y/contrastHigh ContrastFalseT" "rueFalse<Login>/a11y/keyboardOn Screen KeyboardTrueFalseTrueFalse<Login>/a11y/readerScreen ReaderTruelanguage_menuitemTrue<" "/property>False[language_code]TrueFalsesession_menuitemTrueFalse<" "child type=\"submenu\">TrueFa" "lselayout_men" "uitemTrueFalse[layout]TrueFalseclock_menuitemFalsehost_menuitemFalse6power_window" "False" "centercenterTrueFalse<" "property name=\"orientation\">verticalconten" "t_frameTrueFalseTrueFalse2424242466TrueFalse61266gtk-missi" "ng-image002TrueFalsestart6True[title]10TrueFalsestart" "True[text]11FalseTrue0buttonbox_frameTrueFalseTrueFalse242424246endCancelcancel_buttonTrueTrueFalseFalseTrue0OKpower_ok_buttonTrueTrueFalseFalseTrue1FalseTrue1<" "style>screenFalseTrueTrue" "TrueFalseFalselogin_windowTrue" "Falsestartstart" "login_boxTrueFalsevert" "ical<" "property name=\"name\">content_frameTrueFalse0none" "TrueFalse242424618" "<" "property name=\"name\">user_image_borderTrueFalsecentercenter" "0noneuser_imageTrueFalse<" "property name=\"pixel_size\">80" "avatar-default003u" "ser_combobox200<" "property name=\"can_focus\">Falsec" "enter12Trueuser_liststore1210prompt" "_entryTrueTrue\342\200" "\242Enter your username11prompt_entry200Tr" "ueTrue12TrueFalse\342\200\242FalseF" "alseEnter your password12TrueTrue0greeter_infobarFalseFalseendFalseFalse-1FalseTrueFalse[message]TrueTrue0FalseTrue-1FalseTrue1buttonbox_frameTrueFalse0noneTrueFalse242424Cancelcancel_b" "uttonTrueTrueFals" "eFalseTrue0Log Inlogin_buttonTr" "ueTrueFalseFalseTrueend1False<" "property name=\"fill\">True2" }; static const unsigned lightdm_gtk_greeter_ui_length = 18953u; lightdm-gtk-greeter-2.0.5/configure.ac0000664000175000017500000001647513253544533021672 0ustar00bluesabrebluesabre00000000000000# # Copyright (C) 2010 - 2011, Robert Ancell # Copyright (C) 2012 - 2013, Lionel Le Folgoc # Copyright (C) 2013 - 2018, Sean Davis # Copyright (C) 2014, Andrew P. # # This program is free software: you can redistribute it and/or modify it under # the terms of the GNU General Public License as published by the Free Software # Foundation, either version 3 of the License, or (at your option) any later # version. See http://www.gnu.org/copyleft/gpl.html the full text of the # license. # dnl Process this file with autoconf to produce a configure script. AC_PREREQ([2.64]) AC_INIT([lightdm-gtk-greeter],[2.0.5],[https://launchpad.net/lightdm-gtk-greeter]) AC_CONFIG_HEADERS([config.h]) AC_CONFIG_SRCDIR([src/lightdm-gtk-greeter.c]) AC_CONFIG_MACRO_DIR([m4]) LT_INIT AM_INIT_AUTOMAKE([1.11 tar-ustar foreign -Wall -Wno-portability]) AM_MAINTAINER_MODE([enable]) # Use AM_SILENT_RULES if present m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES(yes)]) AC_PROG_CC GOBJECT_INTROSPECTION_CHECK(0.9.5) dnl ########################################################################### dnl Standard headers dnl ########################################################################### AC_CHECK_HEADERS([stdlib.h]) dnl ########################################################################### dnl Dependencies dnl ########################################################################### PKG_CHECK_MODULES([GTK], [gtk+-3.0]) PKG_CHECK_MODULES([GMODULE], [gmodule-export-2.0]) PKG_CHECK_MODULES([LIGHTDMGOBJECT], [liblightdm-gobject-1 >= 1.19.2], [AC_DEFINE([HAVE_LIBLIGHTDMGOBJECT_1_19_2], [1], [Building with liblightdmgobject 1.19.2])], [PKG_CHECK_MODULES([LIGHTDMGOBJECT], [liblightdm-gobject-1 >= 1.3.5])] ) PKG_CHECK_MODULES([LIBX11], [x11]) AC_CHECK_PROG([HAVE_EXO_CSOURCE], [exo-csource], [yes]) if test x"$HAVE_EXO_CSOURCE" != xyes; then AC_MSG_FAILURE([exo-csource not installed]) fi dnl ########################################################################### dnl Optional dependencies dnl ########################################################################### INDICATOR_REQUIRED_VERSION=0.3.92 INDICATOR_PKG=indicator3-0.4 IDO_PKG=libido3-0.1 dnl ########################################################################### AC_ARG_ENABLE([libindicator], AC_HELP_STRING([--enable-libindicator], [Enable libindicator support]) AC_HELP_STRING([--disable-libindicator], [Disable libindicator support]), [], [enable_libindicator=yes]) AS_IF([test "x$enable_libindicator" = "xyes"], [ AS_IF([$PKG_CONFIG --exists "$INDICATOR_PKG >= $INDICATOR_REQUIRED_VERSION" >/dev/null 2>&1], [ PKG_CHECK_MODULES([LIBINDICATOR], [$INDICATOR_PKG >= $INDICATOR_REQUIRED_VERSION], [ have_libindicator=yes INDICATORDIR=`$PKG_CONFIG --variable=indicatordir $INDICATOR_PKG` AC_SUBST(INDICATORDIR) UNITY_INDICATORDIR="${prefix}/share/unity/indicators" AC_SUBST(UNITY_INDICATORDIR) AC_DEFINE([HAVE_LIBINDICATOR], [1], [Define if "$INDICATOR_PKG" is present]) CPPFLAGS_OLD="$CPPFLAGS" CPPFLAGS=`$PKG_CONFIG --cflags ${INDICATOR_PKG}` AC_CHECK_HEADER([libindicator/indicator-ng.h], [AC_DEFINE([HAVE_LIBINDICATOR_NG], [], [Define if "libindicator/indicator-ng.h" is present])], [], [-]) CPPFLAGS="$CPPFLAGS_OLD" ]) ], [ AC_MSG_CHECKING([for optional package $INDICATOR_PKG]) AC_MSG_RESULT([not found]) ]) ], [ AC_MSG_CHECKING([for optional package $INDICATOR_PKG]) AC_MSG_RESULT([disabled]) ]) dnl ########################################################################### AC_ARG_ENABLE([libido], AC_HELP_STRING([--enable-libido], [Enable libido support]) AC_HELP_STRING([--disable-libido], [Disable libido support]), [], [enable_libido=yes]) AS_IF([test "x$enable_libido" = "xyes" && test "x$have_libindicator" = "xyes"], [ AS_IF([$PKG_CONFIG --exists "$IDO_PKG" >/dev/null 2>&1], [ PKG_CHECK_MODULES([LIBIDO], [$IDO_PKG >= 13.10], [ AC_DEFINE([HAVE_LIBIDO], [1], [Define if "$IDO_PKG" is present]) ]) ], [ AC_MSG_CHECKING([for optional package $IDO_PKG]) AC_MSG_RESULT([not found]) ]) ], [ AC_MSG_CHECKING([for optional package $IDO_PKG]) AC_MSG_RESULT([disabled]) ]) dnl ########################################################################### AC_ARG_WITH([libxklavier], AS_HELP_STRING([--with-libxklavier], [Use libxklavier to manage layouts (instead of LightDM API)])) AS_IF([test "x$with_libxklavier" = "xyes"], [ PKG_CHECK_MODULES([LIBXKLAVIER], [libxklavier], [have_xklavier=yes]) AC_DEFINE([HAVE_LIBXKLAVIER], [1], [Define if "libxklavier" is present]) ], []) dnl ########################################################################### AC_ARG_ENABLE([at-spi-command], AC_HELP_STRING([--enable-at-spi-command[=command]], [Try to start at-spi service]]) AC_HELP_STRING([--disable-at-spi-command], [Do not start at-spi service]), [], []) AS_IF([test "x$enable_at_spi_command" != "xno"], [ if test "x$enable_at_spi_command" = "xyes" || test "x$enable_at_spi_command" = "x"; then enable_at_spi_command="/usr/lib/at-spi2-core/at-spi-bus-launcher --launch-immediately" fi AC_DEFINE_UNQUOTED([AT_SPI_COMMAND], ["$enable_at_spi_command"], [Command to start at-spi service]) ]) dnl ########################################################################### AC_ARG_ENABLE([indicator-services-command], AC_HELP_STRING([--enable-indicator-services-command[=command]], [Try to start indicators service]]) AC_HELP_STRING([--disable-indicator-services-command], [Do not start indicators service]), [], []) AS_IF([test "x$enable_indicator_services_command" != "xno"], [ if test "x$enable_indicator_services_command" = "xyes" || test "x$enable_indicator_services_command" = "x"; then enable_indicator_services_command="upstart --user --startup-event indicator-services-start" fi AC_DEFINE_UNQUOTED([INDICATOR_SERVICES_COMMAND], ["$enable_indicator_services_command"], [Command to start indicators service]) ]) dnl ########################################################################### AC_ARG_ENABLE([kill-on-sigterm], AC_HELP_STRING([--enable-kill-on-sigterm], [Kill greeter instance on SIGTERM, see LP1445461]) AC_HELP_STRING([--disable-kill-on-sigterm], [Don't kill greeter on SIGTERM, see LP1445461']), [], [enable_kill_on_sigterm=no]) AS_IF([test "x$enable_kill_on_sigterm" = "xyes"], [ AC_DEFINE([KILL_ON_SIGTERM], [1], [Kill greeter in SIGTERM handler, see LP1445461]) ], []) dnl ########################################################################### dnl Internationalization dnl ########################################################################### GETTEXT_PACKAGE="lightdm-gtk-greeter" AC_SUBST(GETTEXT_PACKAGE) AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE,"$GETTEXT_PACKAGE", [GETTEXT package name]) AM_GNU_GETTEXT_VERSION([0.19.7]) AM_GNU_GETTEXT([external]) dnl ########################################################################### dnl Files to generate dnl ########################################################################### AC_CONFIG_FILES([ Makefile data/Makefile data/badges/Makefile po/Makefile.in src/Makefile ]) AC_OUTPUT lightdm-gtk-greeter-2.0.5/install-sh0000755000175000017500000003546313253544551021404 0ustar00bluesabrebluesabre00000000000000#!/bin/sh # install - install a program, script, or datafile scriptversion=2014-09-12.12; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. tab=' ' nl=' ' IFS=" $tab$nl" # Set DOITPROG to "echo" to test this script. doit=${DOITPROG-} doit_exec=${doit:-exec} # Put in absolute file names if you don't have them in your path; # or use environment vars. chgrpprog=${CHGRPPROG-chgrp} chmodprog=${CHMODPROG-chmod} chownprog=${CHOWNPROG-chown} cmpprog=${CMPPROG-cmp} cpprog=${CPPROG-cp} mkdirprog=${MKDIRPROG-mkdir} mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} posix_mkdir= # Desired mode of installed file. mode=0755 chgrpcmd= chmodcmd=$chmodprog chowncmd= mvcmd=$mvprog rmcmd="$rmprog -f" stripcmd= src= dst= dir_arg= dst_arg= copy_on_change=false is_target_a_directory=possibly usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: --help display this help and exit. --version display version info and exit. -c (ignored) -C install only if different (preserve the last data modification time) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -s $stripprog installed files. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test $# -ne 0; do case $1 in -c) ;; -C) copy_on_change=true;; -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 case $mode in *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) echo "$0: invalid mode: $mode" >&2 exit 1;; esac shift;; -o) chowncmd="$chownprog $2" shift;; -s) stripcmd=$stripprog;; -t) is_target_a_directory=always dst_arg=$2 # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac shift;; -T) is_target_a_directory=never;; --version) echo "$0 $scriptversion"; exit $?;; --) shift break;; -*) echo "$0: invalid option: $1" >&2 exit 1;; *) break;; esac shift done # We allow the use of options -d and -T together, by making -d # take the precedence; this is for compatibility with GNU install. if test -n "$dir_arg"; then if test -n "$dst_arg"; then echo "$0: target directory not allowed when installing a directory." >&2 exit 1 fi fi if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dst_arg" shift # fnord fi shift # arg dst_arg=$arg # Protect names problematic for 'test' and other utilities. case $dst_arg in -* | [=\(\)!]) dst_arg=./$dst_arg;; esac done fi if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call 'install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then if test $# -gt 1 || test "$is_target_a_directory" = always; then if test ! -d "$dst_arg"; then echo "$0: $dst_arg: Is not a directory." >&2 exit 1 fi fi fi if test -z "$dir_arg"; then do_exit='(exit $ret); exit $ret' trap "ret=129; $do_exit" 1 trap "ret=130; $do_exit" 2 trap "ret=141; $do_exit" 13 trap "ret=143; $do_exit" 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. case $mode in # Optimize common cases. *644) cp_umask=133;; *755) cp_umask=22;; *[0-7]) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac fi for src do # Protect names problematic for 'test' and other utilities. case $src in -* | [=\(\)!]) src=./$src;; esac if test -n "$dir_arg"; then dst=$src dstdir=$dst test -d "$dstdir" dstdir_status=$? else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dst_arg # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test "$is_target_a_directory" = never; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else dstdir=`dirname "$dst"` test -d "$dstdir" dstdir_status=$? fi fi obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') # Create intermediate dirs using mode 755 as modified by the umask. # This is like FreeBSD 'install' as of 1997-10-28. umask=`umask` case $stripcmd.$umask in # Optimize common cases. *[2367][2367]) mkdir_umask=$umask;; .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; *[0-7]) mkdir_umask=`expr $umask + 22 \ - $umask % 100 % 40 + $umask % 20 \ - $umask % 10 % 4 + $umask % 2 `;; *) mkdir_umask=$umask,go-w;; esac # With -d, create the new directory with the user-specified mode. # Otherwise, rely on $mkdir_umask. if test -n "$dir_arg"; then mkdir_mode=-m$mode else mkdir_mode= fi posix_mkdir=false case $umask in *[123567][0-7][0-7]) # POSIX mkdir -p sets u+wx bits regardless of umask, which # is incompatible with FreeBSD 'install' when (umask & 300) != 0. ;; *) # $RANDOM is not portable (e.g. dash); use it when possible to # lower collision chance tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0 # As "mkdir -p" follows symlinks and we work in /tmp possibly; so # create the $tmpdir first (and fail if unsuccessful) to make sure # that nobody tries to guess the $tmpdir name. if (umask $mkdir_umask && $mkdirprog $mkdir_mode "$tmpdir" && exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. test_tmpdir="$tmpdir/a" ls_ld_tmpdir=`ls -ld "$test_tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null fi trap '' 0;; esac;; esac if $posix_mkdir && ( umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else # The umask is ridiculous, or mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix='/';; [-=\(\)!]*) prefix='./';; *) prefix='';; esac oIFS=$IFS IFS=/ set -f set fnord $dstdir shift set +f IFS=$oIFS prefixes= for d do test X"$d" = X && continue prefix=$prefix$d if test -d "$prefix"; then prefixes= else if $posix_mkdir; then (umask=$mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else case $prefix in *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *) qprefix=$prefix;; esac prefixes="$prefixes '$qprefix'" fi fi prefix=$prefix/ done if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. (umask $mkdir_umask && eval "\$doit_exec \$mkdirprog $prefixes") || test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi fi if test -n "$dir_arg"; then { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then rm -f "$dsttmp" else # Rename the file to the real destination. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. { # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { test ! -f "$dst" || $doit $rmcmd -f "$dst" 2>/dev/null || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } } || { echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 trap '' 0 fi done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: lightdm-gtk-greeter-2.0.5/compile0000755000175000017500000001624513253544551020753 0ustar00bluesabrebluesabre00000000000000#! /bin/sh # Wrapper for compilers which do not understand '-c -o'. scriptversion=2012-10-14.11; # UTC # Copyright (C) 1999-2014 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # This file is maintained in Automake, please report # bugs to or send patches to # . nl=' ' # We need space, tab and new line, in precisely that order. Quoting is # there to prevent tools from complaining about whitespace usage. IFS=" "" $nl" file_conv= # func_file_conv build_file lazy # Convert a $build file to $host form and store it in $file # Currently only supports Windows hosts. If the determined conversion # type is listed in (the comma separated) LAZY, no conversion will # take place. func_file_conv () { file=$1 case $file in / | /[!/]*) # absolute file, and not a UNC file if test -z "$file_conv"; then # lazily determine how to convert abs files case `uname -s` in MINGW*) file_conv=mingw ;; CYGWIN*) file_conv=cygwin ;; *) file_conv=wine ;; esac fi case $file_conv/,$2, in *,$file_conv,*) ;; mingw/*) file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` ;; cygwin/*) file=`cygpath -m "$file" || echo "$file"` ;; wine/*) file=`winepath -w "$file" || echo "$file"` ;; esac ;; esac } # func_cl_dashL linkdir # Make cl look for libraries in LINKDIR func_cl_dashL () { func_file_conv "$1" if test -z "$lib_path"; then lib_path=$file else lib_path="$lib_path;$file" fi linker_opts="$linker_opts -LIBPATH:$file" } # func_cl_dashl library # Do a library search-path lookup for cl func_cl_dashl () { lib=$1 found=no save_IFS=$IFS IFS=';' for dir in $lib_path $LIB do IFS=$save_IFS if $shared && test -f "$dir/$lib.dll.lib"; then found=yes lib=$dir/$lib.dll.lib break fi if test -f "$dir/$lib.lib"; then found=yes lib=$dir/$lib.lib break fi if test -f "$dir/lib$lib.a"; then found=yes lib=$dir/lib$lib.a break fi done IFS=$save_IFS if test "$found" != yes; then lib=$lib.lib fi } # func_cl_wrapper cl arg... # Adjust compile command to suit cl func_cl_wrapper () { # Assume a capable shell lib_path= shared=: linker_opts= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as 'compile cc -o foo foo.c'. eat=1 case $2 in *.o | *.[oO][bB][jJ]) func_file_conv "$2" set x "$@" -Fo"$file" shift ;; *) func_file_conv "$2" set x "$@" -Fe"$file" shift ;; esac ;; -I) eat=1 func_file_conv "$2" mingw set x "$@" -I"$file" shift ;; -I*) func_file_conv "${1#-I}" mingw set x "$@" -I"$file" shift ;; -l) eat=1 func_cl_dashl "$2" set x "$@" "$lib" shift ;; -l*) func_cl_dashl "${1#-l}" set x "$@" "$lib" shift ;; -L) eat=1 func_cl_dashL "$2" ;; -L*) func_cl_dashL "${1#-L}" ;; -static) shared=false ;; -Wl,*) arg=${1#-Wl,} save_ifs="$IFS"; IFS=',' for flag in $arg; do IFS="$save_ifs" linker_opts="$linker_opts $flag" done IFS="$save_ifs" ;; -Xlinker) eat=1 linker_opts="$linker_opts $2" ;; -*) set x "$@" "$1" shift ;; *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) func_file_conv "$1" set x "$@" -Tp"$file" shift ;; *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) func_file_conv "$1" mingw set x "$@" "$file" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -n "$linker_opts"; then linker_opts="-link$linker_opts" fi exec "$@" $linker_opts exit 1 } eat= case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: compile [--help] [--version] PROGRAM [ARGS] Wrapper for compilers which do not understand '-c -o'. Remove '-o dest.o' from ARGS, run PROGRAM with the remaining arguments, and rename the output as expected. If you are trying to build a whole package this is not the right script to run: please start by reading the file 'INSTALL'. Report bugs to . EOF exit $? ;; -v | --v*) echo "compile $scriptversion" exit $? ;; cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) func_cl_wrapper "$@" # Doesn't return... ;; esac ofile= cfile= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as 'compile cc -o foo foo.c'. # So we strip '-o arg' only if arg is an object. eat=1 case $2 in *.o | *.obj) ofile=$2 ;; *) set x "$@" -o "$2" shift ;; esac ;; *.c) cfile=$1 set x "$@" "$1" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -z "$ofile" || test -z "$cfile"; then # If no '-o' option was seen then we might have been invoked from a # pattern rule where we don't need one. That is ok -- this is a # normal compilation that the losing compiler can handle. If no # '.c' file was seen then we are probably linking. That is also # ok. exec "$@" fi # Name of file we expect compiler to create. cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` # Create the lock directory. # Note: use '[/\\:.-]' here to ensure that we don't use the same name # that we are using for the .o file. Also, base the name on the expected # object file name, since that is what matters with a parallel build. lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d while true; do if mkdir "$lockdir" >/dev/null 2>&1; then break fi sleep 1 done # FIXME: race condition here if user kills between mkdir and trap. trap "rmdir '$lockdir'; exit 1" 1 2 15 # Run the compile. "$@" ret=$? if test -f "$cofile"; then test "$cofile" = "$ofile" || mv "$cofile" "$ofile" elif test -f "${cofile}bj"; then test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" fi rmdir "$lockdir" exit $ret # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: lightdm-gtk-greeter-2.0.5/depcomp0000755000175000017500000005601713253544551020753 0ustar00bluesabrebluesabre00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2016-01-11.22; # UTC # Copyright (C) 1999-2017 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by 'PROGRAMS ARGS'. object Object file output by 'PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputting dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac # Get the directory component of the given path, and save it in the # global variables '$dir'. Note that this directory component will # be either empty or ending with a '/' character. This is deliberate. set_dir_from () { case $1 in */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; *) dir=;; esac } # Get the suffix-stripped basename of the given path, and save it the # global variable '$base'. set_base_from () { base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` } # If no dependency file was actually created by the compiler invocation, # we still have to create a dummy depfile, to avoid errors with the # Makefile "include basename.Plo" scheme. make_dummy_depfile () { echo "#dummy" > "$depfile" } # Factor out some common post-processing of the generated depfile. # Requires the auxiliary global variable '$tmpdepfile' to be set. aix_post_process_depfile () { # If the compiler actually managed to produce a dependency file, # post-process it. if test -f "$tmpdepfile"; then # Each line is of the form 'foo.o: dependency.h'. # Do two passes, one to just change these to # $object: dependency.h # and one to simply output # dependency.h: # which is needed to avoid the deleted-header problem. { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" } > "$depfile" rm -f "$tmpdepfile" else make_dummy_depfile fi } # A tabulation character. tab=' ' # A newline character. nl=' ' # Character ranges might be problematic outside the C locale. # These definitions help. upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ lower=abcdefghijklmnopqrstuvwxyz digits=0123456789 alpha=${upper}${lower} if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Avoid interferences from the environment. gccflag= dashmflag= # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi cygpath_u="cygpath -u -f -" if test "$depmode" = msvcmsys; then # This is just like msvisualcpp but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvisualcpp fi if test "$depmode" = msvc7msys; then # This is just like msvc7 but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u='sed s,\\\\,/,g' depmode=msvc7 fi if test "$depmode" = xlc; then # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. gccflag=-qmakedep=gcc,-MF depmode=gcc fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. ## Unfortunately, FreeBSD c89 acceptance of flags depends upon ## the command line argument order; so add the flags where they ## appear in depend2.am. Note that the slowdown incurred here ## affects only configure: in makefiles, %FASTDEP% shortcuts this. for arg do case $arg in -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; *) set fnord "$@" "$arg" ;; esac shift # fnord shift # $arg done "$@" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. ## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. ## (see the conditional assignment to $gccflag above). ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). Also, it might not be ## supported by the other compilers which use the 'gcc' depmode. ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The second -e expression handles DOS-style file names with drive # letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the "deleted header file" problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. ## Some versions of gcc put a space before the ':'. On the theory ## that the space means something, we add a space to the output as ## well. hp depmode also adds that space, but also prefixes the VPATH ## to the object. Take care to not repeat it in the output. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like '#:fec' to the end of the # dependency line. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ | tr "$nl" ' ' >> "$depfile" echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" ;; xlc) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts '$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else tmpdepfile1=$dir$base.u tmpdepfile2=$dir$base.u tmpdepfile3=$dir$base.u "$@" -M fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done aix_post_process_depfile ;; tcc) # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 # FIXME: That version still under development at the moment of writing. # Make that this statement remains true also for stable, released # versions. # It will wrap lines (doesn't matter whether long or short) with a # trailing '\', as in: # # foo.o : \ # foo.c \ # foo.h \ # # It will put a trailing '\' even on the last line, and will use leading # spaces rather than leading tabs (at least since its commit 0394caf7 # "Emit spaces for -MD"). "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. # We have to change lines of the first kind to '$object: \'. sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" # And for each line of the second kind, we have to emit a 'dep.h:' # dummy dependency, to avoid the deleted-header problem. sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" rm -f "$tmpdepfile" ;; ## The order of this option in the case statement is important, since the ## shell code in configure will try each of these formats in the order ## listed in this file. A plain '-MD' option would be understood by many ## compilers, so we must ensure this comes after the gcc and icc options. pgcc) # Portland's C compiler understands '-MD'. # Will always output deps to 'file.d' where file is the root name of the # source file under compilation, even if file resides in a subdirectory. # The object file name does not affect the name of the '.d' file. # pgcc 10.2 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using '\' : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... set_dir_from "$object" # Use the source, not the object, to determine the base name, since # that's sadly what pgcc will do too. set_base_from "$source" tmpdepfile=$base.d # For projects that build the same source file twice into different object # files, the pgcc approach of using the *source* file root name can cause # problems in parallel builds. Use a locking strategy to avoid stomping on # the same $tmpdepfile. lockdir=$base.d-lock trap " echo '$0: caught signal, cleaning up...' >&2 rmdir '$lockdir' exit 1 " 1 2 13 15 numtries=100 i=$numtries while test $i -gt 0; do # mkdir is a portable test-and-set. if mkdir "$lockdir" 2>/dev/null; then # This process acquired the lock. "$@" -MD stat=$? # Release the lock. rmdir "$lockdir" break else # If the lock is being held by a different process, wait # until the winning process is done or we timeout. while test -d "$lockdir" && test $i -gt 0; do sleep 1 i=`expr $i - 1` done fi i=`expr $i - 1` done trap - 1 2 13 15 if test $i -le 0; then echo "$0: failed to acquire lock after $numtries attempts" >&2 echo "$0: check lockdir '$lockdir'" >&2 exit 1 fi if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp2) # The "hp" stanza above does not work with aCC (C++) and HP's ia64 # compilers, which have integrated preprocessors. The correct option # to use with these is +Maked; it writes dependencies to a file named # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d "$@" -Wc,+Maked else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d "$@" +Maked fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" # Add 'dependent.h:' lines. sed -ne '2,${ s/^ *// s/ \\*$// s/$/:/ p }' "$tmpdepfile" >> "$depfile" else make_dummy_depfile fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in 'foo.d' instead, so we check for that too. # Subdirectories are respected. set_dir_from "$object" set_base_from "$object" if test "$libtool" = yes; then # Libtool generates 2 separate objects for the 2 libraries. These # two compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir$base.o.d # libtool 1.5 tmpdepfile2=$dir.libs/$base.o.d # Likewise. tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d "$@" -MD fi stat=$? if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done # Same post-processing that is required for AIX mode. aix_post_process_depfile ;; msvc7) if test "$libtool" = yes; then showIncludes=-Wc,-showIncludes else showIncludes=-showIncludes fi "$@" $showIncludes > "$tmpdepfile" stat=$? grep -v '^Note: including file: ' "$tmpdepfile" if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" # The first sed program below extracts the file names and escapes # backslashes for cygpath. The second sed program outputs the file # name when reading, but also accumulates all include files in the # hold buffer in order to output them again at the end. This only # works with sed implementations that can handle large buffers. sed < "$tmpdepfile" -n ' /^Note: including file: *\(.*\)/ { s//\1/ s/\\/\\\\/g p }' | $cygpath_u | sort -u | sed -n ' s/ /\\ /g s/\(.*\)/'"$tab"'\1 \\/p s/.\(.*\) \\/\1:/ H $ { s/.*/'"$tab"'/ G p }' >> "$depfile" echo >> "$depfile" # make sure the fragment doesn't end with a backslash rm -f "$tmpdepfile" ;; msvc7msys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for ':' # in the target name. This is to cope with DOS-style filenames: # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. "$@" $dashmflag | sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this sed invocation # correctly. Breaking it into two sed invocations is a workaround. tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift cleared=no eat=no for arg do case $cleared in no) set ""; shift cleared=yes ;; esac if test $eat = yes; then eat=no continue fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -arch) eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" # makedepend may prepend the VPATH from the source file name to the object. # No need to regex-escape $object, excess matching of '.' is harmless. sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process the last invocation # correctly. Breaking it into two sed invocations is a workaround. sed '1,2d' "$tmpdepfile" \ | tr ' ' "$nl" \ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove '-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E \ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi IFS=" " for arg do case "$arg" in -o) shift ;; $object) shift ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E 2>/dev/null | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" echo "$tab" >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; msvcmsys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: lightdm-gtk-greeter-2.0.5/Makefile.in0000664000175000017500000006746013253544551021451 0ustar00bluesabrebluesabre00000000000000# Makefile.in generated by automake 1.15.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2017 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # # Copyright (C) 2010 - 2011, Robert Ancell # Copyright (C) 2012, Lionel Le Folgoc # Copyright (C) 2018, Sean Davis # # This program is free software: you can redistribute it and/or modify it under # the terms of the GNU General Public License as published by the Free Software # Foundation, either version 3 of the License, or (at your option) any later # version. See http://www.gnu.org/copyleft/gpl.html the full text of the # license. # VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ $(top_srcdir)/m4/introspection.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ $(am__configure_deps) $(am__DIST_COMMON) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ cscope distdir dist dist-all distcheck am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ $(LISP)config.h.in # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags CSCOPE = cscope DIST_SUBDIRS = $(SUBDIRS) am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \ ABOUT-NLS AUTHORS COPYING ChangeLog NEWS README compile \ config.guess config.rpath config.sub install-sh ltmain.sh \ missing DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best DIST_TARGETS = dist-gzip distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMODULE_CFLAGS = @GMODULE_CFLAGS@ GMODULE_LIBS = @GMODULE_LIBS@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ HAVE_EXO_CSOURCE = @HAVE_EXO_CSOURCE@ INDICATORDIR = @INDICATORDIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBIDO_CFLAGS = @LIBIDO_CFLAGS@ LIBIDO_LIBS = @LIBIDO_LIBS@ LIBINDICATOR_CFLAGS = @LIBINDICATOR_CFLAGS@ LIBINDICATOR_LIBS = @LIBINDICATOR_LIBS@ LIBINTL = @LIBINTL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIBX11_CFLAGS = @LIBX11_CFLAGS@ LIBX11_LIBS = @LIBX11_LIBS@ LIBXKLAVIER_CFLAGS = @LIBXKLAVIER_CFLAGS@ LIBXKLAVIER_LIBS = @LIBXKLAVIER_LIBS@ LIGHTDMGOBJECT_CFLAGS = @LIGHTDMGOBJECT_CFLAGS@ LIGHTDMGOBJECT_LIBS = @LIGHTDMGOBJECT_LIBS@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POSUB = @POSUB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ UNITY_INDICATORDIR = @UNITY_INDICATORDIR@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ ACLOCAL_AMFLAGS = -I m4 SUBDIRS = data po src EXTRA_DIST = \ autogen.sh \ lightdm-gtk-greeter.doap DISTCLEANFILES = \ gtk-doc.make \ omf.make \ xmldocs.make all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: Makefile @: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @test -f $@ || rm -f stamp-h1 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-tarZ: distdir @echo WARNING: "Support for distribution archives compressed with" \ "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir @echo WARNING: "Support for shar distribution archives is" \ "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build/sub \ && ../../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ --srcdir=../.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile config.h installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(am__recursive_targets) all install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ am--refresh check check-am clean clean-cscope clean-generic \ clean-libtool cscope cscopelist-am ctags ctags-am dist \ dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ dist-tarZ dist-xz dist-zip distcheck distclean \ distclean-generic distclean-hdr distclean-libtool \ distclean-tags distcleancheck distdir distuninstallcheck dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs installdirs-am \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-am uninstall uninstall-am .PRECIOUS: Makefile .PHONY: ChangeLog ChangeLog: (cd $(top_srcdir) && bzr log --gnu-changelog > .changelog.tmp \ && mv .changelog.tmp ChangeLog; rm -f .changelog.tmp) \ || (touch ChangeLog; echo 'Bzr directory not found: installing possibly empty changelog.' >&2) dist-hook: ChangeLog -include $(top_srcdir)/git.mk # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: lightdm-gtk-greeter-2.0.5/config.guess0000755000175000017500000012637313253544551021721 0ustar00bluesabrebluesabre00000000000000#! /bin/sh # Attempt to guess a canonical system name. # Copyright 1992-2018 Free Software Foundation, Inc. timestamp='2018-02-24' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # # Originally written by Per Bothner; maintained since 2000 by Ben Elliston. # # You can get the latest version of this script from: # https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess # # Please send patches to . me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Options: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright 1992-2018 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; dummy=$tmp/dummy ; tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int x;" > "$dummy.c" ; for c in cc gcc c89 c99 ; do if ($c -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown case "$UNAME_SYSTEM" in Linux|GNU|GNU/*) # If the system lacks a compiler, then just pick glibc. # We could probably try harder. LIBC=gnu eval "$set_cc_for_build" cat <<-EOF > "$dummy.c" #include #if defined(__UCLIBC__) LIBC=uclibc #elif defined(__dietlibc__) LIBC=dietlibc #else LIBC=gnu #endif EOF eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`" # If ldd exists, use it to detect musl libc. if command -v ldd >/dev/null && \ ldd --version 2>&1 | grep -q ^musl then LIBC=musl fi ;; esac # Note: order is significant - the case branches are not exclusive. case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ "/sbin/$sysctl" 2>/dev/null || \ "/usr/sbin/$sysctl" 2>/dev/null || \ echo unknown)` case "$UNAME_MACHINE_ARCH" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; earmv*) arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'` endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'` machine="${arch}${endian}"-unknown ;; *) machine="$UNAME_MACHINE_ARCH"-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently (or will in the future) and ABI. case "$UNAME_MACHINE_ARCH" in earm*) os=netbsdelf ;; arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval "$set_cc_for_build" if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ELF__ then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # Determine ABI tags. case "$UNAME_MACHINE_ARCH" in earm*) expr='s/^earmv[0-9]/-eabi/;s/eb$//' abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"` ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case "$UNAME_VERSION" in Debian*) release='-gnu' ;; *) release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "$machine-${os}${release}${abi}" exit ;; *:Bitrig:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE" exit ;; *:OpenBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE" exit ;; *:LibertyBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE" exit ;; *:MidnightBSD:*:*) echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE" exit ;; *:ekkoBSD:*:*) echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE" exit ;; *:SolidBSD:*:*) echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE" exit ;; macppc:MirBSD:*:*) echo powerpc-unknown-mirbsd"$UNAME_RELEASE" exit ;; *:MirBSD:*:*) echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE" exit ;; *:Sortix:*:*) echo "$UNAME_MACHINE"-unknown-sortix exit ;; *:Redox:*:*) echo "$UNAME_MACHINE"-unknown-redox exit ;; mips:OSF1:*.*) echo mips-dec-osf1 exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") UNAME_MACHINE=alpha ;; "EV4.5 (21064)") UNAME_MACHINE=alpha ;; "LCA4 (21066/21068)") UNAME_MACHINE=alpha ;; "EV5 (21164)") UNAME_MACHINE=alphaev5 ;; "EV5.6 (21164A)") UNAME_MACHINE=alphaev56 ;; "EV5.6 (21164PC)") UNAME_MACHINE=alphapca56 ;; "EV5.7 (21164PC)") UNAME_MACHINE=alphapca57 ;; "EV6 (21264)") UNAME_MACHINE=alphaev6 ;; "EV6.7 (21264A)") UNAME_MACHINE=alphaev67 ;; "EV6.8CB (21264C)") UNAME_MACHINE=alphaev68 ;; "EV6.8AL (21264B)") UNAME_MACHINE=alphaev68 ;; "EV6.8CX (21264D)") UNAME_MACHINE=alphaev68 ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE=alphaev69 ;; "EV7 (21364)") UNAME_MACHINE=alphaev7 ;; "EV7.9 (21364A)") UNAME_MACHINE=alphaev79 ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`" # Reset EXIT trap before exiting to avoid spurious non-zero exit code. exitcode=$? trap '' 0 exit $exitcode ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit ;; *:[Aa]miga[Oo][Ss]:*:*) echo "$UNAME_MACHINE"-unknown-amigaos exit ;; *:[Mm]orph[Oo][Ss]:*:*) echo "$UNAME_MACHINE"-unknown-morphos exit ;; *:OS/390:*:*) echo i370-ibm-openedition exit ;; *:z/VM:*:*) echo s390-ibm-zvmoe exit ;; *:OS400:*:*) echo powerpc-ibm-os400 exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix"$UNAME_RELEASE" exit ;; arm*:riscos:*:*|arm*:RISCOS:*:*) echo arm-unknown-riscos exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 exit ;; DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7; exit ;; esac ;; s390x:SunOS:*:*) echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" exit ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" exit ;; i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) echo i386-pc-auroraux"$UNAME_RELEASE" exit ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) eval "$set_cc_for_build" SUN_ARCH=i386 # If there is a compiler, see if it is configured for 64-bit objects. # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. # This test works for both compilers. if [ "$CC_FOR_BUILD" != no_compiler_found ]; then if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then SUN_ARCH=x86_64 fi fi echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`" exit ;; sun3*:SunOS:*:*) echo m68k-sun-sunos"$UNAME_RELEASE" exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos"$UNAME_RELEASE" ;; sun4) echo sparc-sun-sunos"$UNAME_RELEASE" ;; esac exit ;; aushp:SunOS:*:*) echo sparc-auspex-sunos"$UNAME_RELEASE" exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint"$UNAME_RELEASE" exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint"$UNAME_RELEASE" exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint"$UNAME_RELEASE" exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint"$UNAME_RELEASE" exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint"$UNAME_RELEASE" exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint"$UNAME_RELEASE" exit ;; m68k:machten:*:*) echo m68k-apple-machten"$UNAME_RELEASE" exit ;; powerpc:machten:*:*) echo powerpc-apple-machten"$UNAME_RELEASE" exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix"$UNAME_RELEASE" exit ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix"$UNAME_RELEASE" exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix"$UNAME_RELEASE" exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval "$set_cc_for_build" sed 's/^ //' << EOF > "$dummy.c" #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o "$dummy" "$dummy.c" && dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` && SYSTEM_NAME=`"$dummy" "$dummyarg"` && { echo "$SYSTEM_NAME"; exit; } echo mips-mips-riscos"$UNAME_RELEASE" exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax exit ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax exit ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ] then if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \ [ "$TARGET_BINARY_INTERFACE"x = x ] then echo m88k-dg-dgux"$UNAME_RELEASE" else echo m88k-dg-dguxbcs"$UNAME_RELEASE" fi else echo i586-dg-dgux"$UNAME_RELEASE" fi exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit ;; *:IRIX*:*:*) echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`" exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" fi echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV" exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval "$set_cc_for_build" sed 's/^ //' << EOF > "$dummy.c" #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` then echo "$SYSTEM_NAME" else echo rs6000-ibm-aix3.2.5 fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit ;; *:AIX:*:[4567]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/lslpp ] ; then IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` else IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" fi echo "$IBM_ARCH"-ibm-aix"$IBM_REV" exit ;; *:AIX:*:*) echo rs6000-ibm-aix exit ;; ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*) echo romp-ibm-bsd4.4 exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd"$UNAME_RELEASE" # 4.3 with uname added to exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` case "$UNAME_MACHINE" in 9000/31?) HP_ARCH=m68000 ;; 9000/[34]??) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "$sc_cpu_version" in 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "$sc_kernel_bits" in 32) HP_ARCH=hppa2.0n ;; 64) HP_ARCH=hppa2.0w ;; '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 esac ;; esac fi if [ "$HP_ARCH" = "" ]; then eval "$set_cc_for_build" sed 's/^ //' << EOF > "$dummy.c" #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if [ "$HP_ARCH" = hppa2.0w ] then eval "$set_cc_for_build" # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler # generating 64-bit code. GNU and HP use different nomenclature: # # $ CC_FOR_BUILD=cc ./config.guess # => hppa2.0w-hp-hpux11.23 # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | grep -q __LP64__ then HP_ARCH=hppa2.0w else HP_ARCH=hppa64 fi fi echo "$HP_ARCH"-hp-hpux"$HPUX_REV" exit ;; ia64:HP-UX:*:*) HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux"$HPUX_REV" exit ;; 3050*:HI-UX:*:*) eval "$set_cc_for_build" sed 's/^ //' << EOF > "$dummy.c" #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` && { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 exit ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*) echo hppa1.1-hp-bsd exit ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*) echo hppa1.1-hp-osf exit ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo "$UNAME_MACHINE"-unknown-osf1mk else echo "$UNAME_MACHINE"-unknown-osf1 fi exit ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*[A-Z]90:*:*:*) echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit ;; CRAY*TS:*:*:*) echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' exit ;; *:UNICOS/mp:*:*) echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; 5000:UNIX_System_V:4.*:*) FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE" exit ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi"$UNAME_RELEASE" exit ;; *:BSD/OS:*:*) echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE" exit ;; *:FreeBSD:*:*) UNAME_PROCESSOR=`/usr/bin/uname -p` case "$UNAME_PROCESSOR" in amd64) UNAME_PROCESSOR=x86_64 ;; i386) UNAME_PROCESSOR=i586 ;; esac echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" exit ;; i*:CYGWIN*:*) echo "$UNAME_MACHINE"-pc-cygwin exit ;; *:MINGW64*:*) echo "$UNAME_MACHINE"-pc-mingw64 exit ;; *:MINGW*:*) echo "$UNAME_MACHINE"-pc-mingw32 exit ;; *:MSYS*:*) echo "$UNAME_MACHINE"-pc-msys exit ;; i*:PW*:*) echo "$UNAME_MACHINE"-pc-pw32 exit ;; *:Interix*:*) case "$UNAME_MACHINE" in x86) echo i586-pc-interix"$UNAME_RELEASE" exit ;; authenticamd | genuineintel | EM64T) echo x86_64-unknown-interix"$UNAME_RELEASE" exit ;; IA64) echo ia64-unknown-interix"$UNAME_RELEASE" exit ;; esac ;; i*:UWIN*:*) echo "$UNAME_MACHINE"-pc-uwin exit ;; amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" exit ;; *:GNU:*:*) # the GNU system echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`" exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC" exit ;; i*86:Minix:*:*) echo "$UNAME_MACHINE"-pc-minix exit ;; aarch64:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; aarch64_be:Linux:*:*) UNAME_MACHINE=aarch64_be echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep -q ld.so.1 if test "$?" = 0 ; then LIBC=gnulibc1 ; fi echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; arc:Linux:*:* | arceb:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; arm*:Linux:*:*) eval "$set_cc_for_build" if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_EABI__ then echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" else if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_PCS_VFP then echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi else echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf fi fi exit ;; avr32*:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; cris:Linux:*:*) echo "$UNAME_MACHINE"-axis-linux-"$LIBC" exit ;; crisv32:Linux:*:*) echo "$UNAME_MACHINE"-axis-linux-"$LIBC" exit ;; e2k:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; frv:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; hexagon:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; i*86:Linux:*:*) echo "$UNAME_MACHINE"-pc-linux-"$LIBC" exit ;; ia64:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; k1om:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; m32r*:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; m68*:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; mips:Linux:*:* | mips64:Linux:*:*) eval "$set_cc_for_build" sed 's/^ //' << EOF > "$dummy.c" #undef CPU #undef ${UNAME_MACHINE} #undef ${UNAME_MACHINE}el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=${UNAME_MACHINE}el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=${UNAME_MACHINE} #else CPU= #endif #endif EOF eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU'`" test "x$CPU" != x && { echo "$CPU-unknown-linux-$LIBC"; exit; } ;; mips64el:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; openrisc*:Linux:*:*) echo or1k-unknown-linux-"$LIBC" exit ;; or32:Linux:*:* | or1k*:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; padre:Linux:*:*) echo sparc-unknown-linux-"$LIBC" exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-"$LIBC" exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;; PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;; *) echo hppa-unknown-linux-"$LIBC" ;; esac exit ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-"$LIBC" exit ;; ppc:Linux:*:*) echo powerpc-unknown-linux-"$LIBC" exit ;; ppc64le:Linux:*:*) echo powerpc64le-unknown-linux-"$LIBC" exit ;; ppcle:Linux:*:*) echo powerpcle-unknown-linux-"$LIBC" exit ;; riscv32:Linux:*:* | riscv64:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo "$UNAME_MACHINE"-ibm-linux-"$LIBC" exit ;; sh64*:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; sh*:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; tile*:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; vax:Linux:*:*) echo "$UNAME_MACHINE"-dec-linux-"$LIBC" exit ;; x86_64:Linux:*:*) if objdump -f /bin/sh | grep -q elf32-x86-64; then echo "$UNAME_MACHINE"-pc-linux-"$LIBC"x32 else echo "$UNAME_MACHINE"-pc-linux-"$LIBC" fi exit ;; xtensa*:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION" exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo "$UNAME_MACHINE"-pc-os2-emx exit ;; i*86:XTS-300:*:STOP) echo "$UNAME_MACHINE"-unknown-stop exit ;; i*86:atheos:*:*) echo "$UNAME_MACHINE"-unknown-atheos exit ;; i*86:syllable:*:*) echo "$UNAME_MACHINE"-pc-syllable exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) echo i386-unknown-lynxos"$UNAME_RELEASE" exit ;; i*86:*DOS:*:*) echo "$UNAME_MACHINE"-pc-msdosdjgpp exit ;; i*86:*:4.*:*) UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL" else echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL" fi exit ;; i*86:*:5:[678]*) # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}{$UNAME_VERSION}" exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL" else echo "$UNAME_MACHINE"-pc-sysv32 fi exit ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i586. # Note: whatever this is, it MUST be the same as what config.sub # prints for the "djgpp" host, or else GDB configure will decide that # this is a cross-build. echo i586-pc-msdosdjgpp exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit ;; paragon:*:*:*) echo i860-intel-osf1 exit ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv"$UNAME_RELEASE" # Unknown i860-SVR4 fi exit ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv exit ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix exit ;; M68*:*:R3V[5678]*:*) test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; NCR*:*:4.2:* | MPRAS*:*:4.2:*) OS_REL='.3' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos"$UNAME_RELEASE" exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos"$UNAME_RELEASE" exit ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos"$UNAME_RELEASE" exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) echo powerpc-unknown-lynxos"$UNAME_RELEASE" exit ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv"$UNAME_RELEASE" exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo "$UNAME_MACHINE"-sni-sysv4 else echo ns32k-sni-sysv fi exit ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit ;; i*86:VOS:*:*) # From Paul.Green@stratus.com. echo "$UNAME_MACHINE"-stratus-vos exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit ;; mc68*:A/UX:*:*) echo m68k-apple-aux"$UNAME_RELEASE" exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv"$UNAME_RELEASE" else echo mips-unknown-sysv"$UNAME_RELEASE" fi exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit ;; BePC:Haiku:*:*) # Haiku running on Intel PC compatible. echo i586-pc-haiku exit ;; x86_64:Haiku:*:*) echo x86_64-unknown-haiku exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux"$UNAME_RELEASE" exit ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux"$UNAME_RELEASE" exit ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux"$UNAME_RELEASE" exit ;; SX-7:SUPER-UX:*:*) echo sx7-nec-superux"$UNAME_RELEASE" exit ;; SX-8:SUPER-UX:*:*) echo sx8-nec-superux"$UNAME_RELEASE" exit ;; SX-8R:SUPER-UX:*:*) echo sx8r-nec-superux"$UNAME_RELEASE" exit ;; SX-ACE:SUPER-UX:*:*) echo sxace-nec-superux"$UNAME_RELEASE" exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody"$UNAME_RELEASE" exit ;; *:Rhapsody:*:*) echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE" exit ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown eval "$set_cc_for_build" if test "$UNAME_PROCESSOR" = unknown ; then UNAME_PROCESSOR=powerpc fi if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then if [ "$CC_FOR_BUILD" != no_compiler_found ]; then if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then case $UNAME_PROCESSOR in i386) UNAME_PROCESSOR=x86_64 ;; powerpc) UNAME_PROCESSOR=powerpc64 ;; esac fi # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_PPC >/dev/null then UNAME_PROCESSOR=powerpc fi fi elif test "$UNAME_PROCESSOR" = i386 ; then # Avoid executing cc on OS X 10.9, as it ships with a stub # that puts up a graphical alert prompting to install # developer tools. Any system running Mac OS X 10.7 or # later (Darwin 11 and later) is required to have a 64-bit # processor. This is not true of the ARM version of Darwin # that Apple uses in portable devices. UNAME_PROCESSOR=x86_64 fi echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE" exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = x86; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE" exit ;; *:QNX:*:4*) echo i386-pc-qnx exit ;; NEO-*:NONSTOP_KERNEL:*:*) echo neo-tandem-nsk"$UNAME_RELEASE" exit ;; NSE-*:NONSTOP_KERNEL:*:*) echo nse-tandem-nsk"$UNAME_RELEASE" exit ;; NSR-*:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk"$UNAME_RELEASE" exit ;; NSV-*:NONSTOP_KERNEL:*:*) echo nsv-tandem-nsk"$UNAME_RELEASE" exit ;; NSX-*:NONSTOP_KERNEL:*:*) echo nsx-tandem-nsk"$UNAME_RELEASE" exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit ;; DS/*:UNIX_System_V:*:*) echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE" exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = 386; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo "$UNAME_MACHINE"-unknown-plan9 exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit ;; *:ITS:*:*) echo pdp10-unknown-its exit ;; SEI:*:*:SEIUX) echo mips-sei-seiux"$UNAME_RELEASE" exit ;; *:DragonFly:*:*) echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" exit ;; *:*VMS:*:*) UNAME_MACHINE=`(uname -p) 2>/dev/null` case "$UNAME_MACHINE" in A*) echo alpha-dec-vms ; exit ;; I*) echo ia64-dec-vms ; exit ;; V*) echo vax-dec-vms ; exit ;; esac ;; *:XENIX:*:SysV) echo i386-pc-xenix exit ;; i*86:skyos:*:*) echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`" exit ;; i*86:rdos:*:*) echo "$UNAME_MACHINE"-pc-rdos exit ;; i*86:AROS:*:*) echo "$UNAME_MACHINE"-pc-aros exit ;; x86_64:VMkernel:*:*) echo "$UNAME_MACHINE"-unknown-esx exit ;; amd64:Isilon\ OneFS:*:*) echo x86_64-unknown-onefs exit ;; esac echo "$0: unable to guess system type" >&2 case "$UNAME_MACHINE:$UNAME_SYSTEM" in mips:Linux | mips64:Linux) # If we got here on MIPS GNU/Linux, output extra information. cat >&2 <&2 </dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = "$UNAME_MACHINE" UNAME_RELEASE = "$UNAME_RELEASE" UNAME_SYSTEM = "$UNAME_SYSTEM" UNAME_VERSION = "$UNAME_VERSION" EOF exit 1 # Local variables: # eval: (add-hook 'write-file-functions 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: lightdm-gtk-greeter-2.0.5/COPYING0000664000175000017500000010451313243241724020421 0ustar00bluesabrebluesabre00000000000000 GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things. To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. For the developers' and authors' protection, the GPL clearly explains that there is no warranty for this free software. For both users' and authors' sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS 0. Definitions. "This License" refers to version 3 of the GNU General Public License. "Copyright" also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. "The Program" refers to any copyrightable work licensed under this License. Each licensee is addressed as "you". "Licensees" and "recipients" may be individuals or organizations. To "modify" a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a "modified version" of the earlier work or a work "based on" the earlier work. A "covered work" means either the unmodified Program or a work based on the Program. To "propagate" a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well. To "convey" a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying. An interactive user interface displays "Appropriate Legal Notices" to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. 1. Source Code. The "source code" for a work means the preferred form of the work for making modifications to it. "Object code" means any non-source form of a work. A "Standard Interface" means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. The "System Libraries" of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A "Major Component", in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it. The "Corresponding Source" for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work's System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work. The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. The Corresponding Source for a work in source code form is that same work. 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary. 3. Protecting Users' Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work's users, your or third parties' legal rights to forbid circumvention of technological measures. 4. Conveying Verbatim Copies. You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions: a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to "keep intact all notices". c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it. d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an "aggregate" if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation's users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate. 6. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways: a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange. b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge. c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b. d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements. e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. A "User Product" is either (1) a "consumer product", which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, "normally used" refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product. "Installation Information" for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made. If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM). The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. 7. Additional Terms. "Additional permissions" are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions. When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission. Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms: a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or d) Limiting the use for publicity purposes of names of licensors or authors of the material; or e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors. All other non-permissive additional terms are considered "further restrictions" within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying. If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms. Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way. 8. Termination. You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10. 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so. 10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An "entity transaction" is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party's predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. 11. Patents. A "contributor" is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor's "contributor version". A contributor's "essential patent claims" are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, "control" includes the right to grant patent sublicenses in a manner consistent with the requirements of this License. Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a "patent license" is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To "grant" such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party. If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. "Knowingly relying" means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient's use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it. A patent license is "discriminatory" if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007. Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law. 12. No Surrender of Others' Freedom. If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program. 13. Use with the GNU Affero General Public License. Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. 14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License "or any later version" applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Program. Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version. 15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. Limitation of Liability. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively state the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . Also add information on how to contact you by electronic and paper mail. If the program does terminal interaction, make it output a short notice like this when it starts in an interactive mode: Copyright (C) This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, your program's commands might be different; for a GUI interface, you would use an "about box". You should also get your employer (if you work as a programmer) or school, if any, to sign a "copyright disclaimer" for the program, if necessary. For more information on this, and how to apply and follow the GNU GPL, see . The GNU General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. But first, please read . lightdm-gtk-greeter-2.0.5/config.sub0000755000175000017500000010645013253544551021356 0ustar00bluesabrebluesabre00000000000000#! /bin/sh # Configuration validation subroutine script. # Copyright 1992-2018 Free Software Foundation, Inc. timestamp='2018-02-22' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # Please send patches to . # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # You can get the latest version of this script from: # https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS Canonicalize a configuration name. Options: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright 1992-2018 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo "$1" exit ;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \ kopensolaris*-gnu* | cloudabi*-eabi* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; android-linux) os=-linux-android basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown ;; *) basic_machine=`echo "$1" | sed 's/-[^-]*$//'` if [ "$basic_machine" != "$1" ] then os=`echo "$1" | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis | -knuth | -cray | -microblaze*) os= basic_machine=$1 ;; -bluegene*) os=-cnk ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco6) os=-sco5v6 basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -sco5) os=-sco3.2v5 basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -sco5v6*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -lynx*178) os=-lynxos178 ;; -lynx*5) os=-lynxos5 ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo "$1" | sed -e 's/86-.*/86-sequent/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | aarch64 | aarch64_be \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ | arc | arceb \ | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ | avr | avr32 \ | ba \ | be32 | be64 \ | bfin \ | c4x | c8051 | clipper \ | d10v | d30v | dlx | dsp16xx \ | e2k | epiphany \ | fido | fr30 | frv | ft32 \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | hexagon \ | i370 | i860 | i960 | ia16 | ia64 \ | ip2k | iq2000 \ | k1om \ | le32 | le64 \ | lm32 \ | m32c | m32r | m32rle | m68000 | m68k | m88k \ | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ | mips64octeon | mips64octeonel \ | mips64orion | mips64orionel \ | mips64r5900 | mips64r5900el \ | mips64vr | mips64vrel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa32r6 | mipsisa32r6el \ | mipsisa64 | mipsisa64el \ | mipsisa64r2 | mipsisa64r2el \ | mipsisa64r6 | mipsisa64r6el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipsr5900 | mipsr5900el \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ | moxie \ | mt \ | msp430 \ | nds32 | nds32le | nds32be \ | nios | nios2 | nios2eb | nios2el \ | ns16k | ns32k \ | open8 | or1k | or1knd | or32 \ | pdp10 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle \ | pru \ | pyramid \ | riscv32 | riscv64 \ | rl78 | rx \ | score \ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ | spu \ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ | ubicom32 \ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ | visium \ | wasm32 \ | x86 | xc16x | xstormy16 | xtensa \ | z8k | z80) basic_machine=$basic_machine-unknown ;; c54x) basic_machine=tic54x-unknown ;; c55x) basic_machine=tic55x-unknown ;; c6x) basic_machine=tic6x-unknown ;; leon|leon[3-9]) basic_machine=sparc-$basic_machine ;; m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip) basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65) ;; ms1) basic_machine=mt-unknown ;; strongarm | thumb | xscale) basic_machine=arm-unknown ;; xgate) basic_machine=$basic_machine-unknown os=-none ;; xscaleeb) basic_machine=armeb-unknown ;; xscaleel) basic_machine=armel-unknown ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | aarch64-* | aarch64_be-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ | ba-* \ | be32-* | be64-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* \ | c8051-* | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | e2k-* | elxsi-* \ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | hexagon-* \ | i*86-* | i860-* | i960-* | ia16-* | ia64-* \ | ip2k-* | iq2000-* \ | k1om-* \ | le32-* | le64-* \ | lm32-* \ | m32c-* | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ | microblaze-* | microblazeel-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ | mips64octeon-* | mips64octeonel-* \ | mips64orion-* | mips64orionel-* \ | mips64r5900-* | mips64r5900el-* \ | mips64vr-* | mips64vrel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa32r6-* | mipsisa32r6el-* \ | mipsisa64-* | mipsisa64el-* \ | mipsisa64r2-* | mipsisa64r2el-* \ | mipsisa64r6-* | mipsisa64r6el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipsr5900-* | mipsr5900el-* \ | mipstx39-* | mipstx39el-* \ | mmix-* \ | mt-* \ | msp430-* \ | nds32-* | nds32le-* | nds32be-* \ | nios-* | nios2-* | nios2eb-* | nios2el-* \ | none-* | np1-* | ns16k-* | ns32k-* \ | open8-* \ | or1k*-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ | pru-* \ | pyramid-* \ | riscv32-* | riscv64-* \ | rl78-* | romp-* | rs6000-* | rx-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \ | tahoe-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tile*-* \ | tron-* \ | ubicom32-* \ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ | vax-* \ | visium-* \ | wasm32-* \ | we32k-* \ | x86-* | x86_64-* | xc16x-* | xps100-* \ | xstormy16-* | xtensa*-* \ | ymp-* \ | z8k-* | z80-*) ;; # Recognize the basic CPU types without company name, with glob match. xtensa*) basic_machine=$basic_machine-unknown ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-pc os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; abacus) basic_machine=abacus-unknown ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amd64) basic_machine=x86_64-pc ;; amd64-*) basic_machine=x86_64-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aros) basic_machine=i386-pc os=-aros ;; asmjs) basic_machine=asmjs-unknown ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; blackfin) basic_machine=bfin-unknown os=-linux ;; blackfin-*) basic_machine=bfin-`echo "$basic_machine" | sed 's/^[^-]*-//'` os=-linux ;; bluegene*) basic_machine=powerpc-ibm os=-cnk ;; c54x-*) basic_machine=tic54x-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; c55x-*) basic_machine=tic55x-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; c6x-*) basic_machine=tic6x-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; c90) basic_machine=c90-cray os=-unicos ;; cegcc) basic_machine=arm-unknown os=-cegcc ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | j90) basic_machine=j90-cray os=-unicos ;; craynv) basic_machine=craynv-cray os=-unicosmp ;; cr16 | cr16-*) basic_machine=cr16-unknown os=-elf ;; crds | unos) basic_machine=m68k-crds ;; crisv32 | crisv32-* | etraxfs*) basic_machine=crisv32-axis ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; crx) basic_machine=crx-unknown os=-elf ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; decsystem10* | dec10*) basic_machine=pdp10-dec os=-tops10 ;; decsystem20* | dec20*) basic_machine=pdp10-dec os=-tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; dicos) basic_machine=i686-pc os=-dicos ;; djgpp) basic_machine=i586-pc os=-msdosdjgpp ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2*) basic_machine=m68k-bull os=-sysv3 ;; e500v[12]) basic_machine=powerpc-unknown os=$os"spe" ;; e500v[12]-*) basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'` os=$os"spe" ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; i*86v32) basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; leon-*|leon[3-9]-*) basic_machine=sparc-`echo "$basic_machine" | sed 's/-.*//'` ;; m68knommu) basic_machine=m68k-unknown os=-linux ;; m68knommu-*) basic_machine=m68k-`echo "$basic_machine" | sed 's/^[^-]*-//'` os=-linux ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; microblaze*) basic_machine=microblaze-xilinx ;; mingw64) basic_machine=x86_64-pc os=-mingw64 ;; mingw32) basic_machine=i686-pc os=-mingw32 ;; mingw32ce) basic_machine=arm-unknown os=-mingw32ce ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mips3*-*) basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`-unknown ;; monitor) basic_machine=m68k-rom68k os=-coff ;; morphos) basic_machine=powerpc-unknown os=-morphos ;; moxiebox) basic_machine=moxie-unknown os=-moxiebox ;; msdos) basic_machine=i386-pc os=-msdos ;; ms1-*) basic_machine=`echo "$basic_machine" | sed -e 's/ms1-/mt-/'` ;; msys) basic_machine=i686-pc os=-msys ;; mvs) basic_machine=i370-ibm os=-mvs ;; nacl) basic_machine=le32-unknown os=-nacl ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; neo-tandem) basic_machine=neo-tandem ;; nse-tandem) basic_machine=nse-tandem ;; nsr-tandem) basic_machine=nsr-tandem ;; nsv-tandem) basic_machine=nsv-tandem ;; nsx-tandem) basic_machine=nsx-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; openrisc | openrisc-*) basic_machine=or32-unknown ;; os400) basic_machine=powerpc-ibm os=-os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; parisc) basic_machine=hppa-unknown os=-linux ;; parisc-*) basic_machine=hppa-`echo "$basic_machine" | sed 's/^[^-]*-//'` os=-linux ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pc98) basic_machine=i386-pc ;; pc98-*) basic_machine=i386-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; pentium4) basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; pentium4-*) basic_machine=i786-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc | ppcbe) basic_machine=powerpc-unknown ;; ppc-* | ppcbe-*) basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rdos | rdos64) basic_machine=x86_64-pc os=-rdos ;; rdos32) basic_machine=i386-pc os=-rdos ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; s390 | s390-*) basic_machine=s390-ibm ;; s390x | s390x-*) basic_machine=s390x-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sb1) basic_machine=mipsisa64sb1-unknown ;; sb1el) basic_machine=mipsisa64sb1el-unknown ;; sde) basic_machine=mipsisa32-sde os=-elf ;; sei) basic_machine=mips-sei os=-seiux ;; sequent) basic_machine=i386-sequent ;; sh5el) basic_machine=sh5le-unknown ;; simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; strongarm-* | thumb-*) basic_machine=arm-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=alphaev5-cray os=-unicos ;; t90) basic_machine=t90-cray os=-unicos ;; tile*) basic_machine=$basic_machine-unknown os=-linux-gnu ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; toad1) basic_machine=pdp10-xkl os=-tops20 ;; tower | tower-32) basic_machine=m68k-ncr ;; tpf) basic_machine=s390x-ibm os=-tpf ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; x64) basic_machine=x86_64-pc ;; xbox) basic_machine=i686-pc os=-mingw32 ;; xps | xps100) basic_machine=xps100-honeywell ;; xscale-* | xscalee[bl]-*) basic_machine=`echo "$basic_machine" | sed 's/^xscale/arm/'` ;; ymp) basic_machine=ymp-cray os=-unicos ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; romp) basic_machine=romp-ibm ;; mmix) basic_machine=mmix-knuth ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo "$basic_machine" | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo "$basic_machine" | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases that might get confused # with valid system types. # -solaris* is a basic system type, with this one exception. -auroraux) os=-auroraux ;; -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # es1800 is here to avoid being matched by es* (a different OS) -es1800*) os=-ose ;; # Now accept the basic system types. # The portable systems comes first. # Each alternative MUST end in a * to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ | -sym* | -kopensolaris* | -plan9* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* | -aros* | -cloudabi* | -sortix* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -knetbsd* | -mirbsd* | -netbsd* \ | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* | -cegcc* | -glidix* \ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ | -linux-newlib* | -linux-musl* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \ | -onefs* | -tirtos* | -phoenix* | -fuchsia* | -redox* | -bme* \ | -midnightbsd*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto-qnx*) ;; -nto*) os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -xray | -os68k* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo "$os" | sed -e 's|mac|macos|'` ;; -linux-dietlibc) os=-linux-dietlibc ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo "$os" | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo "$os" | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -os400*) os=-os400 ;; -wince*) os=-wince ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -atheos*) os=-atheos ;; -syllable*) os=-syllable ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -nova*) os=-rtmk-nova ;; -ns2) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -tpf*) os=-tpf ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4*) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -zvmoe) os=-zvmoe ;; -dicos*) os=-dicos ;; -pikeos*) # Until real need of OS specific support for # particular features comes up, bare metal # configurations are quite functional. case $basic_machine in arm*) os=-eabi ;; *) os=-elf ;; esac ;; -nacl*) ;; -ios) ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in score-*) os=-elf ;; spu-*) os=-elf ;; *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; c4x-* | tic4x-*) os=-coff ;; c8051-*) os=-elf ;; hexagon-*) os=-elf ;; tic54x-*) os=-coff ;; tic55x-*) os=-coff ;; tic6x-*) os=-coff ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 ;; m68*-cisco) os=-aout ;; mep-*) os=-elf ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; or32-*) os=-coff ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; pru-*) os=-elf ;; *-be) os=-beos ;; *-ibm) os=-aix ;; *-knuth) os=-mmixware ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -cnk*|-aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -os400*) vendor=ibm ;; -ptx*) vendor=sequent ;; -tpf*) vendor=ibm ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo "$basic_machine" | sed "s/unknown/$vendor/"` ;; esac echo "$basic_machine$os" exit # Local variables: # eval: (add-hook 'write-file-functions 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: lightdm-gtk-greeter-2.0.5/aclocal.m40000664000175000017500000012634213253544550021236 0ustar00bluesabrebluesabre00000000000000# generated automatically by aclocal 1.15.1 -*- Autoconf -*- # Copyright (C) 1996-2017 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, [m4_warning([this file was generated for autoconf 2.69. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically 'autoreconf'.])]) # Copyright (C) 2002-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.15' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.15.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.15.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to # '$srcdir', '$srcdir/..', or '$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is '.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl # Expand $ac_aux_dir to an absolute path. am_aux_dir=`cd "$ac_aux_dir" && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ([2.52])dnl m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], [$1], [CXX], [depcc="$CXX" am_compiler_list=], [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], [$1], [UPC], [depcc="$UPC" am_compiler_list=], [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi am__universal=false m4_case([$1], [CC], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac], [CXX], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac]) for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES. AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE([dependency-tracking], [dnl AS_HELP_STRING( [--enable-dependency-tracking], [do not reject slow dependency extractors]) AS_HELP_STRING( [--disable-dependency-tracking], [speeds up one-time build])]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl AC_SUBST([am__nodep])dnl _AM_SUBST_NOTMAKE([am__nodep])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each '.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC]) [_AM_PROG_CC_C_O ]) # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.65])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [AC_DIAGNOSE([obsolete], [$0: two- and three-arguments forms are deprecated.]) m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if( m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), [ok:ok],, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) AM_MISSING_PROG([AUTOCONF], [autoconf]) AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) AM_MISSING_PROG([AUTOHEADER], [autoheader]) AM_MISSING_PROG([MAKEINFO], [makeinfo]) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # AC_SUBST([mkdir_p], ['$(MKDIR_P)']) # We need awk for the "check" target (and possibly the TAP driver). The # system "awk" is bad on some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES([CC])], [m4_define([AC_PROG_CC], m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES([CXX])], [m4_define([AC_PROG_CXX], m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES([OBJC])], [m4_define([AC_PROG_OBJC], m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], [_AM_DEPENDENCIES([OBJCXX])], [m4_define([AC_PROG_OBJCXX], m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl ]) AC_REQUIRE([AM_SILENT_RULES])dnl dnl The testsuite driver may need to know about EXEEXT, so add the dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl # POSIX will say in a future version that running "rm -f" with no argument # is OK; and we want to be able to make that assumption in our Makefile # recipes. So use an aggressive probe to check that the usage we want is # actually supported "in the wild" to an acceptable degree. # See automake bug#10828. # To make any issue more visible, cause the running configure to be aborted # by default if the 'rm' program in use doesn't match our expectations; the # user can still override this though. if rm -f && rm -fr && rm -rf; then : OK; else cat >&2 <<'END' Oops! Your 'rm' program seems unable to run without file operands specified on the command line, even when the '-f' option is present. This is contrary to the behaviour of most rm programs out there, and not conforming with the upcoming POSIX standard: Please tell bug-automake@gnu.org about your system, including the value of your $PATH and any error possibly output before this message. This can help us improve future automake versions. END if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then echo 'Configuration will proceed anyway, since you have set the' >&2 echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 echo >&2 else cat >&2 <<'END' Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation that behaves properly: . If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM to "yes", and re-run configure. END AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) fi fi dnl The trailing newline in this macro's definition is deliberate, for dnl backward compatibility and to allow trailing 'dnl'-style comments dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. ]) dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST([install_sh])]) # Copyright (C) 2003-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- # From Jim Meyering # Copyright (C) 1996-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MAINTAINER_MODE([DEFAULT-MODE]) # ---------------------------------- # Control maintainer-specific portions of Makefiles. # Default is to disable them, unless 'enable' is passed literally. # For symmetry, 'disable' may be passed as well. Anyway, the user # can override the default with the --enable/--disable switch. AC_DEFUN([AM_MAINTAINER_MODE], [m4_case(m4_default([$1], [disable]), [enable], [m4_define([am_maintainer_other], [disable])], [disable], [m4_define([am_maintainer_other], [enable])], [m4_define([am_maintainer_other], [enable]) m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode's default is 'disable' unless 'enable' is passed AC_ARG_ENABLE([maintainer-mode], [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], am_maintainer_other[ make rules and dependencies not useful (and sometimes confusing) to the casual installer])], [USE_MAINTAINER_MODE=$enableval], [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) AC_MSG_RESULT([$USE_MAINTAINER_MODE]) AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) MAINT=$MAINTAINER_MODE_TRUE AC_SUBST([MAINT])dnl ] ) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it is modern enough. # If it is, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= AC_MSG_WARN(['missing' script is too old or missing]) fi ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # -------------------- # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), [1])]) # _AM_SET_OPTIONS(OPTIONS) # ------------------------ # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Copyright (C) 1999-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_CC_C_O # --------------- # Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC # to automatically call this. AC_DEFUN([_AM_PROG_CC_C_O], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([compile])dnl AC_LANG_PUSH([C])dnl AC_CACHE_CHECK( [whether $CC understands -c and -o together], [am_cv_prog_cc_c_o], [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i]) if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi AC_LANG_POP([C])]) # For backward compatibility. AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) # Copyright (C) 2001-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_RUN_LOG(COMMAND) # ------------------- # Run COMMAND, save the exit status in ac_status, and log it. # (This has been adapted from Autoconf's _AC_RUN_LOG macro.) AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD (exit $ac_status); }]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi if test "$[2]" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT([yes]) # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi AC_CONFIG_COMMANDS_PRE( [AC_MSG_CHECKING([that generated files are newer than configure]) if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi AC_MSG_RESULT([done])]) rm -f conftest.file ]) # Copyright (C) 2009-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_SILENT_RULES([DEFAULT]) # -------------------------- # Enable less verbose build rules; with the default set to DEFAULT # ("yes" being less verbose, "no" or empty being verbose). AC_DEFUN([AM_SILENT_RULES], [AC_ARG_ENABLE([silent-rules], [dnl AS_HELP_STRING( [--enable-silent-rules], [less verbose build output (undo: "make V=1")]) AS_HELP_STRING( [--disable-silent-rules], [verbose build output (undo: "make V=0")])dnl ]) case $enable_silent_rules in @%:@ ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; esac dnl dnl A few 'make' implementations (e.g., NonStop OS and NextStep) dnl do not support nested variable expansions. dnl See automake bug#9928 and bug#10237. am_make=${MAKE-make} AC_CACHE_CHECK([whether $am_make supports nested variables], [am_cv_make_support_nested_variables], [if AS_ECHO([['TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi]) if test $am_cv_make_support_nested_variables = yes; then dnl Using '$V' instead of '$(V)' breaks IRIX make. AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AC_SUBST([AM_V])dnl AM_SUBST_NOTMAKE([AM_V])dnl AC_SUBST([AM_DEFAULT_V])dnl AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl AC_SUBST([AM_DEFAULT_VERBOSITY])dnl AM_BACKSLASH='\' AC_SUBST([AM_BACKSLASH])dnl _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ]) # Copyright (C) 2001-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor 'install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in "make install-strip", and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # -------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004-2017 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of 'v7', 'ustar', or 'pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar # AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AC_SUBST([AMTAR], ['$${TAR-tar}']) # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' m4_if([$1], [v7], [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], [m4_case([$1], [ustar], [# The POSIX 1988 'ustar' format is defined with fixed-size fields. # There is notably a 21 bits limit for the UID and the GID. In fact, # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 # and bug#13588). am_max_uid=2097151 # 2^21 - 1 am_max_gid=$am_max_uid # The $UID and $GID variables are not portable, so we need to resort # to the POSIX-mandated id(1) utility. Errors in the 'id' calls # below are definitely unexpected, so allow the users to see them # (that is, avoid stderr redirection). am_uid=`id -u || echo unknown` am_gid=`id -g || echo unknown` AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) if test $am_uid -le $am_max_uid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) if test $am_gid -le $am_max_gid; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none fi], [pax], [], [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Go ahead even if we have the value already cached. We do so because we # need to set the values for the 'am__tar' and 'am__untar' variables. _am_tools=${am_cv_prog_tar_$1-$_am_tools} for _am_tool in $_am_tools; do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works. rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR m4_include([m4/gettext.m4]) m4_include([m4/iconv.m4]) m4_include([m4/intlmacosx.m4]) m4_include([m4/introspection.m4]) m4_include([m4/lib-ld.m4]) m4_include([m4/lib-link.m4]) m4_include([m4/lib-prefix.m4]) m4_include([m4/libtool.m4]) m4_include([m4/ltoptions.m4]) m4_include([m4/ltsugar.m4]) m4_include([m4/ltversion.m4]) m4_include([m4/lt~obsolete.m4]) m4_include([m4/nls.m4]) m4_include([m4/pkg.m4]) m4_include([m4/po.m4]) m4_include([m4/progtest.m4]) lightdm-gtk-greeter-2.0.5/configure0000775000175000017500000214074413253544550021311 0ustar00bluesabrebluesabre00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.69 for lightdm-gtk-greeter 2.0.5. # # Report bugs to . # # # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # Use a proper internal environment variable to ensure we don't fall # into an infinite loop, continuously re-executing ourselves. if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then _as_can_reexec=no; export _as_can_reexec; # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 as_fn_exit 255 fi # We don't want this to propagate to other subprocesses. { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : else exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1 test -x / || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 test \$(( 1 + 1 )) = 2 || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir/$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : CONFIG_SHELL=$as_shell as_have_required=yes if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : break 2 fi fi done;; esac as_found=false done $as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : CONFIG_SHELL=$SHELL as_have_required=yes fi; } IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : export CONFIG_SHELL # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi if test x$as_have_required = xno; then : $as_echo "$0: This script requires a shell more modern than all" $as_echo "$0: the shells that I found on your system." if test x${ZSH_VERSION+set} = xset ; then $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else $as_echo "$0: Please tell bug-autoconf@gnu.org and $0: https://launchpad.net/lightdm-gtk-greeter about your $0: system, including any error possibly output before this $0: message. Then install a modern shell, or manually run $0: the script under such a shell if you do have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # If we had to re-execute with $CONFIG_SHELL, we're ensured to have # already done that, so ensure we don't try to do so again and fall # in an infinite loop. This has already happened in practice. _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" SHELL=${CONFIG_SHELL-/bin/sh} test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME='lightdm-gtk-greeter' PACKAGE_TARNAME='lightdm-gtk-greeter' PACKAGE_VERSION='2.0.5' PACKAGE_STRING='lightdm-gtk-greeter 2.0.5' PACKAGE_BUGREPORT='https://launchpad.net/lightdm-gtk-greeter' PACKAGE_URL='' ac_unique_file="src/lightdm-gtk-greeter.c" # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" gt_needs= ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS LIBOBJS POSUB LTLIBINTL LIBINTL INTLLIBS LTLIBICONV LIBICONV INTL_MACOSX_LIBS XGETTEXT_EXTRA_OPTIONS MSGMERGE XGETTEXT_015 XGETTEXT GMSGFMT_015 MSGFMT_015 GMSGFMT MSGFMT GETTEXT_MACRO_VERSION USE_NLS GETTEXT_PACKAGE LIBXKLAVIER_LIBS LIBXKLAVIER_CFLAGS LIBIDO_LIBS LIBIDO_CFLAGS UNITY_INDICATORDIR INDICATORDIR LIBINDICATOR_LIBS LIBINDICATOR_CFLAGS HAVE_EXO_CSOURCE LIBX11_LIBS LIBX11_CFLAGS LIGHTDMGOBJECT_LIBS LIGHTDMGOBJECT_CFLAGS GMODULE_LIBS GMODULE_CFLAGS GTK_LIBS GTK_CFLAGS HAVE_INTROSPECTION_FALSE HAVE_INTROSPECTION_TRUE INTROSPECTION_MAKEFILE INTROSPECTION_LIBS INTROSPECTION_CFLAGS INTROSPECTION_TYPELIBDIR INTROSPECTION_GIRDIR INTROSPECTION_GENERATE INTROSPECTION_COMPILER INTROSPECTION_SCANNER PKG_CONFIG_LIBDIR PKG_CONFIG_PATH PKG_CONFIG MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE AM_BACKSLASH AM_DEFAULT_VERBOSITY AM_DEFAULT_V AM_V am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE am__nodep AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__quote am__include DEPDIR am__untar am__tar AMTAR am__leading_dot SET_MAKE mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM CPP LT_SYS_LIBRARY_PATH OTOOL64 OTOOL LIPO NMEDIT DSYMUTIL MANIFEST_TOOL AWK RANLIB STRIP ac_ct_AR AR DLLTOOL OBJDUMP LN_S NM ac_ct_DUMPBIN DUMPBIN LD FGREP EGREP GREP SED OBJEXT EXEEXT ac_ct_CC CPPFLAGS LDFLAGS CFLAGS CC host_os host_vendor host_cpu host build_os build_vendor build_cpu build LIBTOOL target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir runstatedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_shared enable_static with_pic enable_fast_install with_aix_soname with_gnu_ld with_sysroot enable_libtool_lock enable_dependency_tracking enable_silent_rules enable_maintainer_mode enable_introspection enable_libindicator enable_libido with_libxklavier enable_at_spi_command enable_indicator_services_command enable_kill_on_sigterm enable_nls enable_rpath with_libiconv_prefix with_libintl_prefix ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS LT_SYS_LIBRARY_PATH CPP PKG_CONFIG PKG_CONFIG_PATH PKG_CONFIG_LIBDIR GTK_CFLAGS GTK_LIBS GMODULE_CFLAGS GMODULE_LIBS LIGHTDMGOBJECT_CFLAGS LIGHTDMGOBJECT_LIBS LIBX11_CFLAGS LIBX11_LIBS LIBINDICATOR_CFLAGS LIBINDICATOR_LIBS LIBIDO_CFLAGS LIBIDO_LIBS LIBXKLAVIER_CFLAGS LIBXKLAVIER_LIBS' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' runstatedir='${localstatedir}/run' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *=) ac_optarg= ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -runstatedir | --runstatedir | --runstatedi | --runstated \ | --runstate | --runstat | --runsta | --runst | --runs \ | --run | --ru | --r) ac_prev=runstatedir ;; -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \ | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \ | --run=* | --ru=* | --r=*) runstatedir=$ac_optarg ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error $? "unrecognized option: \`$ac_option' Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir runstatedir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures lightdm-gtk-greeter 2.0.5 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/lightdm-gtk-greeter] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of lightdm-gtk-greeter 2.0.5:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-shared[=PKGS] build shared libraries [default=yes] --enable-static[=PKGS] build static libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) --enable-dependency-tracking do not reject slow dependency extractors --disable-dependency-tracking speeds up one-time build --enable-silent-rules less verbose build output (undo: "make V=1") --disable-silent-rules verbose build output (undo: "make V=0") --disable-maintainer-mode disable make rules and dependencies not useful (and sometimes confusing) to the casual installer --enable-introspection=[no/auto/yes] Enable introspection for this build --enable-libindicator Enable libindicator support --disable-libindicator Disable libindicator support --enable-libido Enable libido support --disable-libido Disable libido support --enable-at-spi-command=command Try to start at-spi service] --disable-at-spi-command Do not start at-spi service --enable-indicator-services-command=command Try to start indicators service] --disable-indicator-services-command Do not start indicators service --enable-kill-on-sigterm Kill greeter instance on SIGTERM, see LP1445461 --disable-kill-on-sigterm Don't kill greeter on SIGTERM, see LP1445461' --disable-nls do not use Native Language Support --disable-rpath do not hardcode runtime library paths Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use both] --with-aix-soname=aix|svr4|both shared library versioning (aka "SONAME") variant to provide on AIX, [default=aix]. --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-sysroot[=DIR] Search for dependent libraries within DIR (or the compiler's sysroot if not specified). --with-libxklavier Use libxklavier to manage layouts (instead of LightDM API) --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib --without-libiconv-prefix don't search for libiconv in includedir and libdir --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib --without-libintl-prefix don't search for libintl in includedir and libdir Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory LT_SYS_LIBRARY_PATH User-defined run-time library search path. CPP C preprocessor PKG_CONFIG path to pkg-config utility PKG_CONFIG_PATH directories to add to pkg-config's search path PKG_CONFIG_LIBDIR path overriding pkg-config's built-in search path GTK_CFLAGS C compiler flags for GTK, overriding pkg-config GTK_LIBS linker flags for GTK, overriding pkg-config GMODULE_CFLAGS C compiler flags for GMODULE, overriding pkg-config GMODULE_LIBS linker flags for GMODULE, overriding pkg-config LIGHTDMGOBJECT_CFLAGS C compiler flags for LIGHTDMGOBJECT, overriding pkg-config LIGHTDMGOBJECT_LIBS linker flags for LIGHTDMGOBJECT, overriding pkg-config LIBX11_CFLAGS C compiler flags for LIBX11, overriding pkg-config LIBX11_LIBS linker flags for LIBX11, overriding pkg-config LIBINDICATOR_CFLAGS C compiler flags for LIBINDICATOR, overriding pkg-config LIBINDICATOR_LIBS linker flags for LIBINDICATOR, overriding pkg-config LIBIDO_CFLAGS C compiler flags for LIBIDO, overriding pkg-config LIBIDO_LIBS linker flags for LIBIDO, overriding pkg-config LIBXKLAVIER_CFLAGS C compiler flags for LIBXKLAVIER, overriding pkg-config LIBXKLAVIER_LIBS linker flags for LIBXKLAVIER, overriding pkg-config Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF lightdm-gtk-greeter configure 2.0.5 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_c_try_compile LINENO # -------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_compile # ac_fn_c_try_link LINENO # ----------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || test -x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_link # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_compile # ac_fn_c_try_cpp LINENO # ---------------------- # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } > conftest.i && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_cpp # ac_fn_c_try_run LINENO # ---------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. Assumes # that executables *can* be run. ac_fn_c_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then : ac_retval=0 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_run # ac_fn_c_check_func LINENO FUNC VAR # ---------------------------------- # Tests whether FUNC exists, setting the cache variable VAR accordingly ac_fn_c_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case declares $2. For example, HP-UX 11i declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $2 (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $2 /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$2 || defined __stub___$2 choke me #endif int main () { return $2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_func # ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists, giving a warning if it cannot be compiled using # the include files in INCLUDES and setting the cache variable VAR # accordingly. ac_fn_c_check_header_mongrel () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if eval \${$3+:} false; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 $as_echo_n "checking $2 usability... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_header_compiler=yes else ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 $as_echo_n "checking $2 presence... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <$2> _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : ac_header_preproc=yes else ac_header_preproc=no fi rm -f conftest.err conftest.i conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( yes:no: ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; no:yes:* ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ( $as_echo "## -------------------------------------------------------- ## ## Report this to https://launchpad.net/lightdm-gtk-greeter ## ## -------------------------------------------------------- ##" ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=\$ac_header_compiler" fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_mongrel # ac_fn_c_check_header_preproc LINENO HEADER VAR # ---------------------------------------------- # Tests whether HEADER is present, setting the cache variable VAR accordingly. ac_fn_c_check_header_preproc () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <$2> _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f conftest.err conftest.i conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_preproc cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by lightdm-gtk-greeter $as_me 2.0.5, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo $as_echo "## ---------------- ## ## Cache variables. ## ## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo $as_echo "## ----------------- ## ## Output variables. ## ## ----------------- ##" echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then $as_echo "## ------------------- ## ## File substitutions. ## ## ------------------- ##" echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then $as_echo "## ----------- ## ## confdefs.h. ## ## ----------- ##" echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h $as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_URL "$PACKAGE_URL" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then # We do not want a PATH search for config.site. case $CONFIG_SITE in #(( -*) ac_site_file1=./$CONFIG_SITE;; */*) ac_site_file1=$CONFIG_SITE;; *) ac_site_file1=./$CONFIG_SITE;; esac elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" \ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi gt_needs="$gt_needs " # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_config_headers="$ac_config_headers config.h" ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. case `pwd` in *\ * | *\ *) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 $as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; esac macro_version='2.4.6' macro_revision='2.4.6' ltmain=$ac_aux_dir/ltmain.sh # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } if ${ac_cv_build+:} false; then : $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; *) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' set x $ac_cv_build shift build_cpu=$1 build_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: build_os=$* IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } if ${ac_cv_host+:} false; then : $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; *) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' set x $ac_cv_host shift host_cpu=$1 host_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: host_os=$* IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac # Backslashify metacharacters that are still active within # double-quoted strings. sed_quote_subst='s/\(["`$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 $as_echo_n "checking how to print strings... " >&6; } # Test print first, because it will be a builtin if present. if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='print -r --' elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then ECHO='printf %s\n' else # Use this function as a fallback that always works. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } ECHO='func_fallback_echo' fi # func_echo_all arg... # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "" } case $ECHO in printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 $as_echo "printf" >&6; } ;; print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 $as_echo "print -r" >&6; } ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 $as_echo "cat" >&6; } ;; esac # Expand $ac_aux_dir to an absolute path. am_aux_dir=`cd "$ac_aux_dir" && pwd` ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 $as_echo_n "checking whether the C compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi if test -z "$ac_file"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error 77 "C compiler cannot create executables See \`config.log' for more details" "$LINENO" 5; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 $as_echo_n "checking for C compiler default output file name... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of executables: cannot compile and link See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { FILE *f = fopen ("conftest.out", "w"); return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files="$ac_clean_files conftest.out" # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } if test "$cross_compiling" != yes; then { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if { ac_try='./conftest$ac_cv_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details" "$LINENO" 5; } fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if ${ac_cv_objext+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of object files: cannot compile See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 $as_echo_n "checking whether $CC understands -c and -o together... " >&6; } if ${am_cv_prog_cc_c_o+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 $as_echo "$am_cv_prog_cc_c_o" >&6; } if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 $as_echo_n "checking for a sed that does not truncate output... " >&6; } if ${ac_cv_path_SED+:} false; then : $as_echo_n "(cached) " >&6 else ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ for ac_i in 1 2 3 4 5 6 7; do ac_script="$ac_script$as_nl$ac_script" done echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed { ac_script=; unset ac_script;} if test -z "$SED"; then ac_path_SED_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_SED" || continue # Check for GNU ac_path_SED and select it if it is found. # Check for GNU $ac_path_SED case `"$ac_path_SED" --version 2>&1` in *GNU*) ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo '' >> "conftest.nl" "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_SED_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_SED="$ac_path_SED" ac_path_SED_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_SED_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_SED"; then as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 fi else ac_cv_path_SED=$SED fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 $as_echo "$ac_cv_path_SED" >&6; } SED="$ac_cv_path_SED" rm -f conftest.sed test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if ${ac_cv_path_GREP+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_GREP" || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if ${ac_cv_path_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_EGREP" || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 $as_echo_n "checking for fgrep... " >&6; } if ${ac_cv_path_FGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 then ac_cv_path_FGREP="$GREP -F" else if test -z "$FGREP"; then ac_path_FGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in fgrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_FGREP" || continue # Check for GNU ac_path_FGREP and select it if it is found. # Check for GNU $ac_path_FGREP case `"$ac_path_FGREP" --version 2>&1` in *GNU*) ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'FGREP' >> "conftest.nl" "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_FGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_FGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_FGREP"; then as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_FGREP=$FGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 $as_echo "$ac_cv_path_FGREP" >&6; } FGREP="$ac_cv_path_FGREP" test -z "$GREP" && GREP=grep # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test yes = "$GCC"; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return, which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD=$ac_prog ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test yes = "$with_gnu_ld"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if ${lt_cv_path_LD+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD=$ac_dir/$ac_prog # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if ${lt_cv_prog_gnu_ld+:} false; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } if ${lt_cv_path_NM+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM=$NM else lt_nm_to_check=${ac_tool_prefix}nm if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. tmp_nm=$ac_dir/$lt_tmp_nm if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then # Check to see if the nm accepts a BSD-compat flag. # Adding the 'sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty case $build_os in mingw*) lt_bad_file=conftest.nm/nofile ;; *) lt_bad_file=/dev/null ;; esac case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in *$lt_bad_file* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break 2 ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break 2 ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS=$lt_save_ifs done : ${lt_cv_path_NM=no} fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } if test no != "$lt_cv_path_NM"; then NM=$lt_cv_path_NM else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : # Let the user override the test. else if test -n "$ac_tool_prefix"; then for ac_prog in dumpbin "link -dump" do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DUMPBIN+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DUMPBIN"; then ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DUMPBIN=$ac_cv_prog_DUMPBIN if test -n "$DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 $as_echo "$DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$DUMPBIN" && break done fi if test -z "$DUMPBIN"; then ac_ct_DUMPBIN=$DUMPBIN for ac_prog in dumpbin "link -dump" do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DUMPBIN"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN if test -n "$ac_ct_DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 $as_echo "$ac_ct_DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_DUMPBIN" && break done if test "x$ac_ct_DUMPBIN" = x; then DUMPBIN=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DUMPBIN=$ac_ct_DUMPBIN fi fi case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols -headers" ;; *) DUMPBIN=: ;; esac fi if test : != "$DUMPBIN"; then NM=$DUMPBIN fi fi test -z "$NM" && NM=nm { $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 $as_echo_n "checking the name lister ($NM) interface... " >&6; } if ${lt_cv_nm_interface+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 (eval echo "\"\$as_me:$LINENO: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 $as_echo "$lt_cv_nm_interface" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 $as_echo_n "checking whether ln -s works... " >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 $as_echo "no, using $LN_S" >&6; } fi # find the maximum length of command line arguments { $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 $as_echo_n "checking the maximum length of command line arguments... " >&6; } if ${lt_cv_sys_max_cmd_len+:} false; then : $as_echo_n "(cached) " >&6 else i=0 teststring=ABCD case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; mint*) # On MiNT this can take a long time and run out of memory. lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; os2*) # The test takes a long time on OS/2. lt_cv_sys_max_cmd_len=8192 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len" && \ test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test X`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && test 17 != "$i" # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac fi if test -n "$lt_cv_sys_max_cmd_len"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 $as_echo "$lt_cv_sys_max_cmd_len" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 $as_echo "none" >&6; } fi max_cmd_len=$lt_cv_sys_max_cmd_len : ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 $as_echo_n "checking how to convert $build file names to $host format... " >&6; } if ${lt_cv_to_host_file_cmd+:} false; then : $as_echo_n "(cached) " >&6 else case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 ;; esac ;; *-*-cygwin* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) lt_cv_to_host_file_cmd=func_convert_file_noop ;; * ) # otherwise, assume *nix lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin ;; esac ;; * ) # unhandled hosts (and "normal" native builds) lt_cv_to_host_file_cmd=func_convert_file_noop ;; esac fi to_host_file_cmd=$lt_cv_to_host_file_cmd { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 $as_echo "$lt_cv_to_host_file_cmd" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 $as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } if ${lt_cv_to_tool_file_cmd+:} false; then : $as_echo_n "(cached) " >&6 else #assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in *-*-mingw* ) case $build in *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac ;; esac fi to_tool_file_cmd=$lt_cv_to_tool_file_cmd { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 $as_echo "$lt_cv_to_tool_file_cmd" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 $as_echo_n "checking for $LD option to reload object files... " >&6; } if ${lt_cv_ld_reload_flag+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_reload_flag='-r' fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 $as_echo "$lt_cv_ld_reload_flag" >&6; } reload_flag=$lt_cv_ld_reload_flag case $reload_flag in "" | " "*) ;; *) reload_flag=" $reload_flag" ;; esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in cygwin* | mingw* | pw32* | cegcc*) if test yes != "$GCC"; then reload_cmds=false fi ;; darwin*) if test yes = "$GCC"; then reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs' else reload_cmds='$LD$reload_flag -o $output$reload_objs' fi ;; esac if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OBJDUMP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OBJDUMP"; then ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 $as_echo "$OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OBJDUMP"; then ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OBJDUMP"; then ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OBJDUMP="objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 $as_echo "$ac_ct_OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OBJDUMP" = x; then OBJDUMP="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OBJDUMP=$ac_ct_OBJDUMP fi else OBJDUMP="$ac_cv_prog_OBJDUMP" fi test -z "$OBJDUMP" && OBJDUMP=objdump { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 $as_echo_n "checking how to recognize dependent libraries... " >&6; } if ${lt_cv_deplibs_check_method+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # 'unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # that responds to the $file_magic_cmd with a given extended regex. # If you have 'file' or equivalent on your system and you're not sure # whether 'pass_all' will *always* work, you probably want this one. case $host_os in aix[4-9]*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi[45]*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin*) # func_win32_libid is a shell function defined in ltmain.sh lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' ;; mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc*) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; haiku*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[3-9]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd* | bitrig*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; os2*) lt_cv_deplibs_check_method=pass_all ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 $as_echo "$lt_cv_deplibs_check_method" >&6; } file_magic_glob= want_nocaseglob=no if test "$build" = "$host"; then case $host_os in mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` fi ;; esac fi file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ac_tool_prefix}dlltool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DLLTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DLLTOOL"; then ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DLLTOOL=$ac_cv_prog_DLLTOOL if test -n "$DLLTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 $as_echo "$DLLTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DLLTOOL"; then ac_ct_DLLTOOL=$DLLTOOL # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DLLTOOL"; then ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DLLTOOL="dlltool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL if test -n "$ac_ct_DLLTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 $as_echo "$ac_ct_DLLTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DLLTOOL" = x; then DLLTOOL="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DLLTOOL=$ac_ct_DLLTOOL fi else DLLTOOL="$ac_cv_prog_DLLTOOL" fi test -z "$DLLTOOL" && DLLTOOL=dlltool { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 $as_echo_n "checking how to associate runtime and link libraries... " >&6; } if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh; # decide which one to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; esac ;; *) # fallback: assume linklib IS sharedlib lt_cv_sharedlib_from_linklib_cmd=$ECHO ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 $as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO if test -n "$ac_tool_prefix"; then for ac_prog in ar do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AR+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AR"; then ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AR="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 $as_echo "$AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AR" && break done fi if test -z "$AR"; then ac_ct_AR=$AR for ac_prog in ar do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_AR+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_AR"; then ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_AR="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 $as_echo "$ac_ct_AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_AR" && break done if test "x$ac_ct_AR" = x; then AR="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac AR=$ac_ct_AR fi fi : ${AR=ar} : ${AR_FLAGS=cru} { $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 $as_echo_n "checking for archiver @FILE support... " >&6; } if ${lt_cv_ar_at_file+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ar_at_file=no cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : echo conftest.$ac_objext > conftest.lst lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 (eval $lt_ar_try) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if test 0 -eq "$ac_status"; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 (eval $lt_ar_try) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if test 0 -ne "$ac_status"; then lt_cv_ar_at_file=@ fi fi rm -f conftest.* libconftest.a fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 $as_echo "$lt_cv_ar_at_file" >&6; } if test no = "$lt_cv_ar_at_file"; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi test -z "$STRIP" && STRIP=: if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 $as_echo "$RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_RANLIB="ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 $as_echo "$ac_ct_RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_RANLIB" = x; then RANLIB=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac RANLIB=$ac_ct_RANLIB fi else RANLIB="$ac_cv_prog_RANLIB" fi test -z "$RANLIB" && RANLIB=: # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in bitrig* | openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" fi case $host_os in darwin*) lock_old_archive_extraction=yes ;; *) lock_old_archive_extraction=no ;; esac for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_AWK+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Check for command to grab the raw symbol name followed by C symbol from nm. { $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } if ${lt_cv_sys_global_symbol_pipe+:} false; then : $as_echo_n "(cached) " >&6 else # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[BCDEGRST]' # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[ABCDGISTW]' ;; hpux*) if test ia64 = "$host_cpu"; then symcode='[ABCDEGRST]' fi ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; osf*) symcode='[BCDEGQRST]' ;; solaris*) symcode='[BDRT]' ;; sco3.2v5*) symcode='[DT]' ;; sysv4.2uw2*) symcode='[DT]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[ABDT]' ;; sysv4) symcode='[DFNSTU]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[ABCDGIRSTW]' ;; esac if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Gets list of data symbols to import. lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" # Adjust the below global symbol transforms to fixup imported variables. lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" lt_c_name_lib_hook="\ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" else # Disable hooks by default. lt_cv_sys_global_symbol_to_import= lt_cdecl_hook= lt_c_name_hook= lt_c_name_lib_hook= fi # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n"\ $lt_cdecl_hook\ " -e 's/^T .* \(.*\)$/extern int \1();/p'"\ " -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ $lt_c_name_hook\ " -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ " -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" # Transform an extracted symbol line into symbol name with lib prefix and # symbol address. lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ $lt_c_name_lib_hook\ " -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ " -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ " -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function, # D for any global variable and I for any imported variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK '"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ " /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ " /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ " {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ " s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then # Now try to grab the symbols. nlist=conftest.nm if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE /* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined __osf__ /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ LT_DLSYM_CONST struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS LIBS=conftstm.$ac_objext CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest$ac_exeext; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&5 fi else echo "cannot find nm_test_var in $nlist" >&5 fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 fi else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test yes = "$pipe_works"; then break else lt_cv_sys_global_symbol_pipe= fi done fi if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 $as_echo "failed" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 $as_echo "ok" >&6; } fi # Response file support. if test "$lt_cv_nm_interface" = "MS dumpbin"; then nm_file_list_spec='@' elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then nm_file_list_spec='@' fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 $as_echo_n "checking for sysroot... " >&6; } # Check whether --with-sysroot was given. if test "${with_sysroot+set}" = set; then : withval=$with_sysroot; else with_sysroot=no fi lt_sysroot= case $with_sysroot in #( yes) if test yes = "$GCC"; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5 $as_echo "$with_sysroot" >&6; } as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 $as_echo "${lt_sysroot:-no}" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5 $as_echo_n "checking for a working dd... " >&6; } if ${ac_cv_path_lt_DD+:} false; then : $as_echo_n "(cached) " >&6 else printf 0123456789abcdef0123456789abcdef >conftest.i cat conftest.i conftest.i >conftest2.i : ${lt_DD:=$DD} if test -z "$lt_DD"; then ac_path_lt_DD_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in dd; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_lt_DD" || continue if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then cmp -s conftest.i conftest.out \ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: fi $ac_path_lt_DD_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_lt_DD"; then : fi else ac_cv_path_lt_DD=$lt_DD fi rm -f conftest.i conftest2.i conftest.out fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5 $as_echo "$ac_cv_path_lt_DD" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5 $as_echo_n "checking how to truncate binary pipes... " >&6; } if ${lt_cv_truncate_bin+:} false; then : $as_echo_n "(cached) " >&6 else printf 0123456789abcdef0123456789abcdef >conftest.i cat conftest.i conftest.i >conftest2.i lt_cv_truncate_bin= if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then cmp -s conftest.i conftest.out \ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" fi rm -f conftest.i conftest2.i conftest.out test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5 $as_echo "$lt_cv_truncate_bin" >&6; } # Calculate cc_basename. Skip known compiler wrappers and cross-prefix. func_cc_basename () { for cc_temp in $*""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` } # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then : enableval=$enable_libtool_lock; fi test no = "$enable_libtool_lock" || enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out what ABI is being produced by ac_compile, and set mode # options accordingly. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE=32 ;; *ELF-64*) HPUX_IA64_MODE=64 ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out what ABI is being produced by ac_compile, and set linker # options accordingly. echo '#line '$LINENO' "configure"' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then if test yes = "$lt_cv_prog_gnu_ld"; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; mips64*-*linux*) # Find out what ABI is being produced by ac_compile, and set linker # options accordingly. echo '#line '$LINENO' "configure"' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then emul=elf case `/usr/bin/file conftest.$ac_objext` in *32-bit*) emul="${emul}32" ;; *64-bit*) emul="${emul}64" ;; esac case `/usr/bin/file conftest.$ac_objext` in *MSB*) emul="${emul}btsmip" ;; *LSB*) emul="${emul}ltsmip" ;; esac case `/usr/bin/file conftest.$ac_objext` in *N32*) emul="${emul}n32" ;; esac LD="${LD-ld} -m $emul" fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out what ABI is being produced by ac_compile, and set linker # options accordingly. Note that the listed cases only cover the # situations where additional linker options are needed (such as when # doing 32-bit compilation for a host where ld defaults to 64-bit, or # vice versa); the common cases where no linker options are needed do # not appear in the list. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) case `/usr/bin/file conftest.o` in *x86-64*) LD="${LD-ld} -m elf32_x86_64" ;; *) LD="${LD-ld} -m elf_i386" ;; esac ;; powerpc64le-*linux*) LD="${LD-ld} -m elf32lppclinux" ;; powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; powerpcle-*linux*) LD="${LD-ld} -m elf64lppc" ;; powerpc-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS=$CFLAGS CFLAGS="$CFLAGS -belf" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 $as_echo_n "checking whether the C compiler needs -belf... " >&6; } if ${lt_cv_cc_needs_belf+:} false; then : $as_echo_n "(cached) " >&6 else ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_cc_needs_belf=yes else lt_cv_cc_needs_belf=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 $as_echo "$lt_cv_cc_needs_belf" >&6; } if test yes != "$lt_cv_cc_needs_belf"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS=$SAVE_CFLAGS fi ;; *-*solaris*) # Find out what ABI is being produced by ac_compile, and set linker # options accordingly. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) case $host in i?86-*-solaris*|x86_64-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) LD="${LD-ld} -m elf64_sparc" ;; esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then LD=${LD-ld}_sol2 fi ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks=$enable_libtool_lock if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. set dummy ${ac_tool_prefix}mt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$MANIFEST_TOOL"; then ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL if test -n "$MANIFEST_TOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 $as_echo "$MANIFEST_TOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_MANIFEST_TOOL"; then ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL # Extract the first word of "mt", so it can be a program name with args. set dummy mt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_MANIFEST_TOOL"; then ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL if test -n "$ac_ct_MANIFEST_TOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 $as_echo "$ac_ct_MANIFEST_TOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_MANIFEST_TOOL" = x; then MANIFEST_TOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL fi else MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" fi test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 $as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } if ${lt_cv_path_mainfest_tool+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&5 if $GREP 'Manifest Tool' conftest.out > /dev/null; then lt_cv_path_mainfest_tool=yes fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 $as_echo "$lt_cv_path_mainfest_tool" >&6; } if test yes != "$lt_cv_path_mainfest_tool"; then MANIFEST_TOOL=: fi case $host_os in rhapsody* | darwin*) if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_DSYMUTIL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DSYMUTIL"; then ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DSYMUTIL=$ac_cv_prog_DSYMUTIL if test -n "$DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 $as_echo "$DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DSYMUTIL"; then ac_ct_DSYMUTIL=$DSYMUTIL # Extract the first word of "dsymutil", so it can be a program name with args. set dummy dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DSYMUTIL"; then ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL if test -n "$ac_ct_DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 $as_echo "$ac_ct_DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DSYMUTIL" = x; then DSYMUTIL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DSYMUTIL=$ac_ct_DSYMUTIL fi else DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. set dummy ${ac_tool_prefix}nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$NMEDIT"; then ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi NMEDIT=$ac_cv_prog_NMEDIT if test -n "$NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 $as_echo "$NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_NMEDIT"; then ac_ct_NMEDIT=$NMEDIT # Extract the first word of "nmedit", so it can be a program name with args. set dummy nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_NMEDIT"; then ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_NMEDIT="nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT if test -n "$ac_ct_NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 $as_echo "$ac_ct_NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_NMEDIT" = x; then NMEDIT=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac NMEDIT=$ac_ct_NMEDIT fi else NMEDIT="$ac_cv_prog_NMEDIT" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. set dummy ${ac_tool_prefix}lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$LIPO"; then ac_cv_prog_LIPO="$LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_LIPO="${ac_tool_prefix}lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi LIPO=$ac_cv_prog_LIPO if test -n "$LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 $as_echo "$LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_LIPO"; then ac_ct_LIPO=$LIPO # Extract the first word of "lipo", so it can be a program name with args. set dummy lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_LIPO"; then ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_LIPO="lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO if test -n "$ac_ct_LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 $as_echo "$ac_ct_LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_LIPO" = x; then LIPO=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac LIPO=$ac_ct_LIPO fi else LIPO="$ac_cv_prog_LIPO" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. set dummy ${ac_tool_prefix}otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL"; then ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OTOOL="${ac_tool_prefix}otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL=$ac_cv_prog_OTOOL if test -n "$OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 $as_echo "$OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL"; then ac_ct_OTOOL=$OTOOL # Extract the first word of "otool", so it can be a program name with args. set dummy otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL"; then ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OTOOL="otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL if test -n "$ac_ct_OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 $as_echo "$ac_ct_OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL" = x; then OTOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL=$ac_ct_OTOOL fi else OTOOL="$ac_cv_prog_OTOOL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. set dummy ${ac_tool_prefix}otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_OTOOL64+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL64"; then ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL64=$ac_cv_prog_OTOOL64 if test -n "$OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 $as_echo "$OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL64"; then ac_ct_OTOOL64=$OTOOL64 # Extract the first word of "otool64", so it can be a program name with args. set dummy otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL64"; then ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_OTOOL64="otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 if test -n "$ac_ct_OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 $as_echo "$ac_ct_OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL64" = x; then OTOOL64=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL64=$ac_ct_OTOOL64 fi else OTOOL64="$ac_cv_prog_OTOOL64" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 $as_echo_n "checking for -single_module linker flag... " >&6; } if ${lt_cv_apple_cc_single_mod+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_apple_cc_single_mod=no if test -z "$LT_MULTI_MODULE"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&5 $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? # If there is a non-empty error log, and "single_module" # appears in it, assume the flag caused a linker warning if test -s conftest.err && $GREP single_module conftest.err; then cat conftest.err >&5 # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. elif test -f libconftest.dylib && test 0 = "$_lt_result"; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&5 fi rm -rf libconftest.dylib* rm -f conftest.* fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 $as_echo "$lt_cv_apple_cc_single_mod" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } if ${lt_cv_ld_exported_symbols_list+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_ld_exported_symbols_list=yes else lt_cv_ld_exported_symbols_list=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 $as_echo_n "checking for -force_load linker flag... " >&6; } if ${lt_cv_ld_force_load+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_force_load=no cat > conftest.c << _LT_EOF int forced_loaded() { return 2;} _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 echo "$AR cru libconftest.a conftest.o" >&5 $AR cru libconftest.a conftest.o 2>&5 echo "$RANLIB libconftest.a" >&5 $RANLIB libconftest.a 2>&5 cat > conftest.c << _LT_EOF int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&5 elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then lt_cv_ld_force_load=yes else cat conftest.err >&5 fi rm -f conftest.err libconftest.a conftest conftest.c rm -rf conftest.dSYM fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 $as_echo "$lt_cv_ld_force_load" >&6; } case $host_os in rhapsody* | darwin1.[012]) _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[91]*) _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; 10.[012][,.]*) _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test yes = "$lt_cv_apple_cc_single_mod"; then _lt_dar_single_mod='$single_module' fi if test yes = "$lt_cv_ld_exported_symbols_list"; then _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' fi if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac # func_munge_path_list VARIABLE PATH # ----------------------------------- # VARIABLE is name of variable containing _space_ separated list of # directories to be munged by the contents of PATH, which is string # having a format: # "DIR[:DIR]:" # string "DIR[ DIR]" will be prepended to VARIABLE # ":DIR[:DIR]" # string "DIR[ DIR]" will be appended to VARIABLE # "DIRP[:DIRP]::[DIRA:]DIRA" # string "DIRP[ DIRP]" will be prepended to VARIABLE and string # "DIRA[ DIRA]" will be appended to VARIABLE # "DIR[:DIR]" # VARIABLE will be replaced by "DIR[ DIR]" func_munge_path_list () { case x$2 in x) ;; *:) eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" ;; x:*) eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" ;; *::*) eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" ;; *) eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" ;; esac } ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if ${ac_cv_prog_CPP+:} false; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if ${ac_cv_header_stdc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in dlfcn.h do : ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default " if test "x$ac_cv_header_dlfcn_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_DLFCN_H 1 _ACEOF fi done # Set options enable_dlopen=no enable_win32_dll=no # Check whether --enable-shared was given. if test "${enable_shared+set}" = set; then : enableval=$enable_shared; p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS=$lt_save_ifs ;; esac else enable_shared=yes fi # Check whether --enable-static was given. if test "${enable_static+set}" = set; then : enableval=$enable_static; p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS=$lt_save_ifs ;; esac else enable_static=yes fi # Check whether --with-pic was given. if test "${with_pic+set}" = set; then : withval=$with_pic; lt_p=${PACKAGE-default} case $withval in yes|no) pic_mode=$withval ;; *) pic_mode=default # Look at the argument we got. We use all the common list separators. lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for lt_pkg in $withval; do IFS=$lt_save_ifs if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done IFS=$lt_save_ifs ;; esac else pic_mode=default fi # Check whether --enable-fast-install was given. if test "${enable_fast_install+set}" = set; then : enableval=$enable_fast_install; p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS=$lt_save_ifs ;; esac else enable_fast_install=yes fi shared_archive_member_spec= case $host,$enable_shared in power*-*-aix[5-9]*,yes) { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5 $as_echo_n "checking which variant of shared library versioning to provide... " >&6; } # Check whether --with-aix-soname was given. if test "${with_aix_soname+set}" = set; then : withval=$with_aix_soname; case $withval in aix|svr4|both) ;; *) as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 ;; esac lt_cv_with_aix_soname=$with_aix_soname else if ${lt_cv_with_aix_soname+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_with_aix_soname=aix fi with_aix_soname=$lt_cv_with_aix_soname fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5 $as_echo "$with_aix_soname" >&6; } if test aix != "$with_aix_soname"; then # For the AIX way of multilib, we name the shared archive member # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, # the AIX toolchain works better with OBJECT_MODE set (default 32). if test 64 = "${OBJECT_MODE-32}"; then shared_archive_member_spec=shr_64 else shared_archive_member_spec=shr fi fi ;; *) with_aix_soname=aix ;; esac # This can be used to rebuild libtool when needed LIBTOOL_DEPS=$ltmain # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' test -z "$LN_S" && LN_S="ln -s" if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 $as_echo_n "checking for objdir... " >&6; } if ${lt_cv_objdir+:} false; then : $as_echo_n "(cached) " >&6 else rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 $as_echo "$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir cat >>confdefs.h <<_ACEOF #define LT_OBJDIR "$lt_cv_objdir/" _ACEOF case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a '.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld=$lt_cv_prog_gnu_ld old_CC=$CC old_CFLAGS=$CFLAGS # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o func_cc_basename $compiler cc_basename=$func_cc_basename_result # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } if ${lt_cv_path_MAGIC_CMD+:} false; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD=$MAGIC_CMD lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/${ac_tool_prefix}file"; then lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD=$lt_cv_path_MAGIC_CMD if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS=$lt_save_ifs MAGIC_CMD=$lt_save_MAGIC_CMD ;; esac fi MAGIC_CMD=$lt_cv_path_MAGIC_CMD if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 $as_echo_n "checking for file... " >&6; } if ${lt_cv_path_MAGIC_CMD+:} false; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD=$MAGIC_CMD lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/file"; then lt_cv_path_MAGIC_CMD=$ac_dir/"file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD=$lt_cv_path_MAGIC_CMD if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS=$lt_save_ifs MAGIC_CMD=$lt_save_MAGIC_CMD ;; esac fi MAGIC_CMD=$lt_cv_path_MAGIC_CMD if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi else MAGIC_CMD=: fi fi fi ;; esac # Use C for the default configuration in the libtool script lt_save_CC=$CC ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o objext=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then lt_prog_compiler_no_builtin_flag= if test yes = "$GCC"; then case $cc_basename in nvcc*) lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; *) lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else : fi fi lt_prog_compiler_wl= lt_prog_compiler_pic= lt_prog_compiler_static= if test yes = "$GCC"; then lt_prog_compiler_wl='-Wl,' lt_prog_compiler_static='-static' case $host_os in aix*) # All AIX code is PIC. if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' fi lt_prog_compiler_pic='-fPIC' ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support lt_prog_compiler_pic='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the '-m68020' flag to GCC prevents building anything better, # like '-m68040'. lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic='-DDLL_EXPORT' case $host_os in os2*) lt_prog_compiler_static='$wl-static' ;; esac ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic='-fno-common' ;; haiku*) # PIC is the default for Haiku. # The "-static" flag exists, but is broken. lt_prog_compiler_static= ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) lt_prog_compiler_pic='-fPIC' ;; esac ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. lt_prog_compiler_can_build_shared=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic=-Kconform_pic fi ;; *) lt_prog_compiler_pic='-fPIC' ;; esac case $cc_basename in nvcc*) # Cuda Compiler Driver 2.2 lt_prog_compiler_wl='-Xlinker ' if test -n "$lt_prog_compiler_pic"; then lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" fi ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) lt_prog_compiler_wl='-Wl,' if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' else lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' fi ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic='-fno-common' case $cc_basename in nagfor*) # NAG Fortran compiler lt_prog_compiler_wl='-Wl,-Wl,,' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; esac ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' case $host_os in os2*) lt_prog_compiler_static='$wl-static' ;; esac ;; hpux9* | hpux10* | hpux11*) lt_prog_compiler_wl='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? lt_prog_compiler_static='$wl-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) lt_prog_compiler_wl='-Wl,' # PIC (with -KPIC) is the default. lt_prog_compiler_static='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in # old Intel for x86_64, which still supported -KPIC. ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; # Lahey Fortran 8.1. lf95*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='--shared' lt_prog_compiler_static='--static' ;; nagfor*) # NAG Fortran compiler lt_prog_compiler_wl='-Wl,-Wl,,' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; tcc*) # Fabrice Bellard et al's Tiny C Compiler lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; ccc*) lt_prog_compiler_wl='-Wl,' # All Alpha code is PIC. lt_prog_compiler_static='-non_shared' ;; xl* | bgxl* | bgf* | mpixl*) # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-qpic' lt_prog_compiler_static='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='' ;; *Sun\ F* | *Sun*Fortran*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Qoption ld ' ;; *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Wl,' ;; *Intel*\ [CF]*Compiler*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; *Portland\ Group*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; esac ;; esac ;; newsos6) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; osf3* | osf4* | osf5*) lt_prog_compiler_wl='-Wl,' # All OSF/1 code is PIC. lt_prog_compiler_static='-non_shared' ;; rdos*) lt_prog_compiler_static='-non_shared' ;; solaris*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' case $cc_basename in f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) lt_prog_compiler_wl='-Qoption ld ';; *) lt_prog_compiler_wl='-Wl,';; esac ;; sunos4*) lt_prog_compiler_wl='-Qoption ld ' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic='-Kconform_pic' lt_prog_compiler_static='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; unicos*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_can_build_shared=no ;; uts4*) lt_prog_compiler_pic='-pic' lt_prog_compiler_static='-Bstatic' ;; *) lt_prog_compiler_can_build_shared=no ;; esac fi case $host_os in # For platforms that do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= ;; *) lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 $as_echo_n "checking for $compiler option to produce PIC... " >&6; } if ${lt_cv_prog_compiler_pic+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic=$lt_prog_compiler_pic fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 $as_echo "$lt_cv_prog_compiler_pic" >&6; } lt_prog_compiler_pic=$lt_cv_prog_compiler_pic # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } if ${lt_cv_prog_compiler_pic_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } if test yes = "$lt_cv_prog_compiler_pic_works"; then case $lt_prog_compiler_pic in "" | " "*) ;; *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; esac else lt_prog_compiler_pic= lt_prog_compiler_can_build_shared=no fi fi # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } if ${lt_cv_prog_compiler_static_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works=yes fi else lt_cv_prog_compiler_static_works=yes fi fi $RM -r conftest* LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } if test yes = "$lt_cv_prog_compiler_static_works"; then : else lt_prog_compiler_static= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if ${lt_cv_prog_compiler_c_o+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } hard_links=nottested if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test no = "$hard_links"; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } runpath_var= allow_undefined_flag= always_export_symbols=no archive_cmds= archive_expsym_cmds= compiler_needs_object=no enable_shared_with_static_runtimes=no export_dynamic_flag_spec= export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' hardcode_automatic=no hardcode_direct=no hardcode_direct_absolute=no hardcode_libdir_flag_spec= hardcode_libdir_separator= hardcode_minus_L=no hardcode_shlibpath_var=unsupported inherit_rpath=no link_all_deplibs=unknown module_cmds= module_expsym_cmds= old_archive_from_new_cmds= old_archive_from_expsyms_cmds= thread_safe_flag_spec= whole_archive_flag_spec= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ' (' and ')$', so one must not match beginning or # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', # as well as any symbol that contains 'd'. exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test yes != "$GCC"; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd* | bitrig*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) link_all_deplibs=no ;; esac ld_shlibs=yes # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no if test yes = "$with_gnu_ld"; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility # with the native linker. However, as the warning in the GNU ld # block says, versions before 2.19.5* couldn't really create working # shared libraries, regardless of the interface used. case `$LD -v 2>&1` in *\ \(GNU\ Binutils\)\ 2.19.5*) ;; *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; *\ \(GNU\ Binutils\)\ [3-9]*) ;; *) lt_use_gnu_ld_interface=yes ;; esac ;; *) lt_use_gnu_ld_interface=yes ;; esac fi if test yes = "$lt_use_gnu_ld_interface"; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='$wl' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' export_dynamic_flag_spec='$wl--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' else whole_archive_flag_spec= fi supports_anon_versioning=no case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken if test ia64 != "$host_cpu"; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to install binutils *** 2.20 or above, or modify your PATH so that a non-GNU linker is found. *** You will then need to restart the configuration process. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' export_dynamic_flag_spec='$wl--export-all-symbols' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file, use it as # is; otherwise, prepend EXPORTS... archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs=no fi ;; haiku*) archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' link_all_deplibs=yes ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported shrext_cmds=.dll archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ prefix_cmds="$SED"~ if test EXPORTS = "`$SED 1q $export_symbols`"; then prefix_cmds="$prefix_cmds -e 1d"; fi~ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' enable_shared_with_static_runtimes=yes ;; interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='$wl-rpath,$libdir' export_dynamic_flag_spec='$wl-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test linux-dietlibc = "$host_os"; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test no = "$tmp_diet" then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec= tmp_sharedflag='--shared' ;; nagfor*) # NAGFOR 5.3 tmp_sharedflag='-Wl,-shared' ;; xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' compiler_needs_object=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' if test yes = "$supports_anon_versioning"; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi case $cc_basename in tcc*) export_dynamic_flag_spec='-rdynamic' ;; xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test yes = "$supports_anon_versioning"; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else ld_shlibs=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac if test no = "$ld_shlibs"; then runpath_var= hardcode_libdir_flag_spec= export_dynamic_flag_spec= whole_archive_flag_spec= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix[4-9]*) if test ia64 = "$host_cpu"; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag= else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to GNU nm, but means don't demangle to AIX nm. # Without the "-l" option, or with the "-B" option, AIX nm treats # weak defined symbols like other global defined symbols, whereas # GNU nm marks them as "W". # While the 'weak' keyword is ignored in the Export File, we need # it in the Import File for the 'aix-soname' feature, so we have # to replace the "-B" option with "-P" for AIX nm. if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # have runtime linking enabled, and use it for executables. # For shared libraries, we enable/disable runtime linking # depending on the kind of the shared library created - # when "with_aix_soname,aix_use_runtimelinking" is: # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables # "aix,yes" lib.so shared, rtl:yes, for executables # lib.a static archive # "both,no" lib.so.V(shr.o) shared, rtl:yes # lib.a(lib.so.V) shared, rtl:no, for executables # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables # lib.a(lib.so.V) shared, rtl:no # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables # lib.a static archive case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then aix_use_runtimelinking=yes break fi done if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then # With aix-soname=svr4, we create the lib.so.V shared archives only, # so we don't have lib.a shared libs to link our executables. # We have to force runtime linking in this case. aix_use_runtimelinking=yes LDFLAGS="$LDFLAGS -Wl,-brtl" fi ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds='' hardcode_direct=yes hardcode_direct_absolute=yes hardcode_libdir_separator=':' link_all_deplibs=yes file_list_spec='$wl-f,' case $with_aix_soname,$aix_use_runtimelinking in aix,*) ;; # traditional, no import file svr4,* | *,yes) # use import file # The Import File defines what to hardcode. hardcode_direct=no hardcode_direct_absolute=no ;; esac if test yes = "$GCC"; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`$CC -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi ;; esac shared_flag='-shared' if test yes = "$aix_use_runtimelinking"; then shared_flag="$shared_flag "'$wl-G' fi # Need to ensure runtime linking is disabled for the traditional # shared library, or the linker may eventually find shared libraries # /with/ Import File - we do not want to mix them. shared_flag_aix='-shared' shared_flag_svr4='-shared $wl-G' else # not using gcc if test ia64 = "$host_cpu"; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test yes = "$aix_use_runtimelinking"; then shared_flag='$wl-G' else shared_flag='$wl-bM:SRE' fi shared_flag_aix='$wl-bM:SRE' shared_flag_svr4='$wl-G' fi fi export_dynamic_flag_spec='$wl-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols=yes if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an # empty executable. if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=/usr/lib:/lib fi fi aix_libpath=$lt_cv_aix_libpath_ fi hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag else if test ia64 = "$host_cpu"; then hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\([^ ]*\) *$/\1/ p } }' lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=/usr/lib:/lib fi fi aix_libpath=$lt_cv_aix_libpath_ fi hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag=' $wl-bernotok' allow_undefined_flag=' $wl-berok' if test yes = "$with_gnu_ld"; then # We only use this code for GNU lds that support --whole-archive. whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec='$convenience' fi archive_cmds_need_lc=yes archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' # -brtl affects multiple linker settings, -berok does not and is overridden later compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' if test svr4 != "$with_aix_soname"; then # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' fi if test aix != "$with_aix_soname"; then archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' else # used by -dlpreopen to get the symbols archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir' fi archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; bsdi[45]*) export_dynamic_flag_spec=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in cl*) # Native MSVC hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported always_export_symbols=yes file_list_spec='@' # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then cp "$export_symbols" "$output_objdir/$soname.def"; echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; else $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; fi~ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, )='true' enable_shared_with_static_runtimes=yes exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' # Don't use ranlib old_postinstall_cmds='chmod 644 $oldlib' postlink_cmds='lt_outputfile="@OUTPUT@"~ lt_tool_outputfile="@TOOL_OUTPUT@"~ case $lt_outputfile in *.exe|*.EXE) ;; *) lt_outputfile=$lt_outputfile.exe lt_tool_outputfile=$lt_tool_outputfile.exe ;; esac~ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; $RM "$lt_outputfile.manifest"; fi' ;; *) # Assume MSVC wrapper hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_from_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' enable_shared_with_static_runtimes=yes ;; esac ;; darwin* | rhapsody*) archive_cmds_need_lc=no hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported if test yes = "$lt_cv_ld_force_load"; then whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec='' fi link_all_deplibs=yes allow_undefined_flag=$_lt_dar_allow_undefined case $cc_basename in ifort*|nagfor*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test yes = "$_lt_dar_can_shared"; then output_verbose_link_cmd=func_echo_all archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" else ld_shlibs=no fi ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2.*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; hpux9*) if test yes = "$GCC"; then archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' else archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' fi hardcode_libdir_flag_spec='$wl+b $wl$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes export_dynamic_flag_spec='$wl-E' ;; hpux10*) if test yes,no = "$GCC,$with_gnu_ld"; then archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test no = "$with_gnu_ld"; then hardcode_libdir_flag_spec='$wl+b $wl$libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes fi ;; hpux11*) if test yes,no = "$GCC,$with_gnu_ld"; then case $host_cpu in hppa*64*) archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) # Older versions of the 11.00 compiler do not understand -b yet # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 $as_echo_n "checking if $CC understands -b... " >&6; } if ${lt_cv_prog_compiler__b+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler__b=no save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS -b" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler__b=yes fi else lt_cv_prog_compiler__b=yes fi fi $RM -r conftest* LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 $as_echo "$lt_cv_prog_compiler__b" >&6; } if test yes = "$lt_cv_prog_compiler__b"; then archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi ;; esac fi if test no = "$with_gnu_ld"; then hardcode_libdir_flag_spec='$wl+b $wl$libdir' hardcode_libdir_separator=: case $host_cpu in hppa*64*|ia64*) hardcode_direct=no hardcode_shlibpath_var=no ;; *) hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test yes = "$GCC"; then archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. # This should be the same for all languages, so no per-tag cache variable. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 $as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } if ${lt_cv_irix_exported_symbol+:} false; then : $as_echo_n "(cached) " >&6 else save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int foo (void) { return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_irix_exported_symbol=yes else lt_cv_irix_exported_symbol=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 $as_echo "$lt_cv_irix_exported_symbol" >&6; } if test yes = "$lt_cv_irix_exported_symbol"; then archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' fi link_all_deplibs=no else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator=: inherit_rpath=yes link_all_deplibs=yes ;; linux*) case $cc_basename in tcc*) # Fabrice Bellard et al's Tiny C Compiler ld_shlibs=yes archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; *nto* | *qnx*) ;; openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no hardcode_direct_absolute=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec='$wl-rpath,$libdir' export_dynamic_flag_spec='$wl-E' else archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='$wl-rpath,$libdir' fi else ld_shlibs=no fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported shrext_cmds=.dll archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ $ECHO EXPORTS >> $output_objdir/$libname.def~ prefix_cmds="$SED"~ if test EXPORTS = "`$SED 1q $export_symbols`"; then prefix_cmds="$prefix_cmds -e 1d"; fi~ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' enable_shared_with_static_runtimes=yes ;; osf3*) if test yes = "$GCC"; then allow_undefined_flag=' $wl-expect_unresolved $wl\*' archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test yes = "$GCC"; then allow_undefined_flag=' $wl-expect_unresolved $wl\*' archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi archive_cmds_need_lc='no' hardcode_libdir_separator=: ;; solaris*) no_undefined_flag=' -z defs' if test yes = "$GCC"; then wlarc='$wl' archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='$wl' archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands '-z linker_flag'. GCC discards it without '$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test yes = "$GCC"; then whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' else whole_archive_flag_spec='-z allextract$convenience -z defaultextract' fi ;; esac link_all_deplibs=yes ;; sunos4*) if test sequent = "$host_vendor"; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) case $host_vendor in sni) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' reload_cmds='$CC -r -o $output$reload_objs' hardcode_direct=no ;; motorola) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag='$wl-z,text' archive_cmds_need_lc=no hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' if test yes = "$GCC"; then archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We CANNOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag='$wl-z,text' allow_undefined_flag='$wl-z,nodefs' archive_cmds_need_lc=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='$wl-R,$libdir' hardcode_libdir_separator=':' link_all_deplibs=yes export_dynamic_flag_spec='$wl-Bexport' runpath_var='LD_RUN_PATH' if test yes = "$GCC"; then archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac if test sni = "$host_vendor"; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) export_dynamic_flag_spec='$wl-Blargedynsym' ;; esac fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } test no = "$ld_shlibs" && can_build_shared=no with_gnu_ld=$with_gnu_ld # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc" in x|xyes) # Assume -lc should be added archive_cmds_need_lc=yes if test yes,yes = "$GCC,$enable_shared"; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } if ${lt_cv_archive_cmds_need_lc+:} false; then : $as_echo_n "(cached) " >&6 else $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl pic_flag=$lt_prog_compiler_pic compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then lt_cv_archive_cmds_need_lc=no else lt_cv_archive_cmds_need_lc=yes fi allow_undefined_flag=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 $as_echo "$lt_cv_archive_cmds_need_lc" >&6; } archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc ;; esac fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } if test yes = "$GCC"; then case $host_os in darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; *) lt_awk_arg='/^libraries:/' ;; esac case $host_os in mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; *) lt_sed_strip_eq='s|=/|/|g' ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` ;; *) lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` ;; esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary... lt_tmp_lt_search_path_spec= lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` # ...but if some path component already ends with the multilib dir we assume # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). case "$lt_multi_os_dir; $lt_search_path_spec " in "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) lt_multi_os_dir= ;; esac for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" elif test -n "$lt_multi_os_dir"; then test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS = " "; FS = "/|\n";} { lt_foo = ""; lt_count = 0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo = "/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[lt_foo]++; } if (lt_freq[lt_foo] == 1) { print lt_foo; } }'` # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's|/\([A-Za-z]:\)|\1|g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=.so postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$release$shared_ext$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='$libname$release$shared_ext$major' ;; aix[4-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes if test ia64 = "$host_cpu"; then # AIX 5 supports IA64 library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line '#! .'. This would cause the generated library to # depend on '.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # Using Import Files as archive members, it is possible to support # filename-based versioning of shared library archives on AIX. While # this would work for both with and without runtime linking, it will # prevent static linking of such archives. So we do filename-based # shared library versioning with .so extension only, which is used # when both runtime linking and shared linking is enabled. # Unfortunately, runtime linking may impact performance, so we do # not want this to be the default eventually. Also, we use the # versioned .so libs for executables only if there is the -brtl # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. # To allow for filename-based versioning support, we need to create # libNAME.so.V as an archive file, containing: # *) an Import File, referring to the versioned filename of the # archive as well as the shared archive member, telling the # bitwidth (32 or 64) of that shared object, and providing the # list of exported symbols of that shared object, eventually # decorated with the 'weak' keyword # *) the shared object with the F_LOADONLY flag set, to really avoid # it being seen by the linker. # At run time we better use the real file rather than another symlink, # but for link time we create the symlink libNAME.so -> libNAME.so.V case $with_aix_soname,$aix_use_runtimelinking in # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. aix,yes) # traditional libtool dynamic_linker='AIX unversionable lib.so' # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' ;; aix,no) # traditional AIX only dynamic_linker='AIX lib.a(lib.so.V)' # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='$libname$release.a $libname.a' soname_spec='$libname$release$shared_ext$major' ;; svr4,*) # full svr4 only dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' # We do not specify a path in Import Files, so LIBPATH fires. shlibpath_overrides_runpath=yes ;; *,yes) # both, prefer svr4 dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' # unpreferred sharedlib libNAME.a needs extra handling postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' # We do not specify a path in Import Files, so LIBPATH fires. shlibpath_overrides_runpath=yes ;; *,no) # both, prefer aix dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" library_names_spec='$libname$release.a $libname.a' soname_spec='$libname$release$shared_ext$major' # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' ;; esac shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='$libname$shared_ext' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=.dll need_version=no need_lib_prefix=no case $GCC,$cc_basename in yes,*) # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \$file`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; esac dynamic_linker='Win32 ld.exe' ;; *,cl*) # Native MSVC libname_spec='$name' soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' library_names_spec='$libname.dll.lib' case $build_os in mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' for lt_path in $LIB do IFS=$lt_save_ifs # Let DOS variable expansion print the short 8.3 style file name. lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" done IFS=$lt_save_ifs # Convert to MSYS style. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form # but this time dos style (no spaces!) so that the unix form looks # like /cygdrive/c/PROGRA~1:/cygdr... sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) sys_lib_search_path_spec=$LIB if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # FIXME: find the short name or the path components, as spaces are # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \$file`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes dynamic_linker='Win32 link.exe' ;; *) # Assume MSVC wrapper library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' soname_spec='$libname$release$major$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[23].*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=no sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' if test 32 = "$HPUX_IA64_MODE"; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" sys_lib_dlsearch_path_spec=/usr/lib/hpux32 else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" sys_lib_dlsearch_path_spec=/usr/lib/hpux64 fi ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' # or fails outright, so override atomically: install_override_mode=555 ;; interix[3-9]*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test yes = "$lt_cv_prog_gnu_ld"; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='$libname$release$shared_ext$major' library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; linux*android*) version_type=none # Android doesn't support versioned libraries. need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext' soname_spec='$libname$release$shared_ext' finish_cmds= shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes dynamic_linker='Android linker' # Don't embed -rpath directories since the linker doesn't support them. hardcode_libdir_flag_spec='-L$libdir' ;; # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH if ${lt_cv_shlibpath_overrides_runpath+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : lt_cv_shlibpath_overrides_runpath=yes fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir fi shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Ideally, we could use ldconfig to report *all* directores which are # searched for libraries, however this is still not possible. Aside from not # being certain /sbin/ldconfig is available, command # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, # even though it is searched at run-time. Try to do the best guess by # appending ld.so.conf contents (and includes) to the search path. if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd* | bitrig*) version_type=sunos sys_lib_dlsearch_path_spec=/usr/lib need_lib_prefix=no if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then need_version=no else need_version=yes fi library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; os2*) libname_spec='$name' version_type=windows shrext_cmds=.dll need_version=no need_lib_prefix=no # OS/2 can only load a DLL with a base name of 8 characters or less. soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; v=$($ECHO $release$versuffix | tr -d .-); n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); $ECHO $n$v`$shared_ext' library_names_spec='${libname}_dll.$libext' dynamic_linker='OS/2 ld.exe' shlibpath_var=BEGINLIBPATH sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec postinstall_cmds='base_file=`basename \$file`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='$libname$release$shared_ext$major' library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test yes = "$with_gnu_ld"; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec; then version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' soname_spec='$libname$shared_ext.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=sco need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test yes = "$with_gnu_ld"; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test no = "$dynamic_linker" && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test yes = "$GCC"; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec fi if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec fi # remember unaugmented sys_lib_dlsearch_path content for libtool script decls... configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec # ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" # to be used as default LT_SYS_LIBRARY_PATH value in generated libtool configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || test -n "$runpath_var" || test yes = "$hardcode_automatic"; then # We can hardcode non-existent directories. if test no != "$hardcode_direct" && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" && test no != "$hardcode_minus_L"; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action=unsupported fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } if test relink = "$hardcode_action" || test yes = "$inherit_rpath"; then # Fast installation is not supported enable_fast_install=no elif test yes = "$shlibpath_overrides_runpath" || test no = "$enable_shared"; then # Fast installation is not necessary enable_fast_install=needless fi if test yes != "$enable_dlopen"; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen=load_add_on lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen=LoadLibrary lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen=dlopen lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl else lt_cv_dlopen=dyld lt_cv_dlopen_libs= lt_cv_dlopen_self=yes fi ;; tpf*) # Don't try to run any link tests for TPF. We know it's impossible # because TPF is a cross-compiler, and we know how we open DSOs. lt_cv_dlopen=dlopen lt_cv_dlopen_libs= lt_cv_dlopen_self=no ;; *) ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" if test "x$ac_cv_func_shl_load" = xyes; then : lt_cv_dlopen=shl_load else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } if ${ac_cv_lib_dld_shl_load+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load (); int main () { return shl_load (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_shl_load=yes else ac_cv_lib_dld_shl_load=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } if test "x$ac_cv_lib_dld_shl_load" = xyes; then : lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld else ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" if test "x$ac_cv_func_dlopen" = xyes; then : lt_cv_dlopen=dlopen else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } if ${ac_cv_lib_svld_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_svld_dlopen=yes else ac_cv_lib_svld_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } if test "x$ac_cv_lib_svld_dlopen" = xyes; then : lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } if ${ac_cv_lib_dld_dld_link+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dld_link (); int main () { return dld_link (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_dld_link=yes else ac_cv_lib_dld_dld_link=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } if test "x$ac_cv_lib_dld_dld_link" = xyes; then : lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld fi fi fi fi fi fi ;; esac if test no = "$lt_cv_dlopen"; then enable_dlopen=no else enable_dlopen=yes fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS=$CPPFLAGS test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS=$LDFLAGS wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS=$LIBS LIBS="$lt_cv_dlopen_libs $LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 $as_echo_n "checking whether a program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self+:} false; then : $as_echo_n "(cached) " >&6 else if test yes = "$cross_compiling"; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; esac else : # compilation failed lt_cv_dlopen_self=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } if test yes = "$lt_cv_dlopen_self"; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self_static+:} false; then : $as_echo_n "(cached) " >&6 else if test yes = "$cross_compiling"; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif /* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else { if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; else puts (dlerror ()); } /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; esac else : # compilation failed lt_cv_dlopen_self_static=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 $as_echo "$lt_cv_dlopen_self_static" >&6; } fi CPPFLAGS=$save_CPPFLAGS LDFLAGS=$save_LDFLAGS LIBS=$save_LIBS ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi striplib= old_striplib= { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 $as_echo_n "checking whether stripping libraries is possible... " >&6; } if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP"; then striplib="$STRIP -x" old_striplib="$STRIP -S" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } ;; esac fi # Report what library types will actually be built { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 $as_echo_n "checking if libtool supports shared libraries... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 $as_echo "$can_build_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 $as_echo_n "checking whether to build shared libraries... " >&6; } test no = "$can_build_shared" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test yes = "$enable_shared" && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[4-9]*) if test ia64 != "$host_cpu"; then case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in yes,aix,yes) ;; # shared object as lib.so file only yes,svr4,*) ;; # shared object as lib.so archive member only yes,*) enable_static=no ;; # shared object in lib.a archive as well esac fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 $as_echo "$enable_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 $as_echo_n "checking whether to build static libraries... " >&6; } # Make sure either enable_shared or enable_static is yes. test yes = "$enable_shared" || enable_static=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 $as_echo "$enable_static" >&6; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC=$lt_save_CC ac_config_commands="$ac_config_commands libtool" # Only expand once: am__api_version='1.15' # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if ${ac_cv_path_install+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in #(( ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; esac # Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( am_has_slept=no for am_try in 1 2; do echo "timestamp, slept: $am_has_slept" > conftest.file set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". as_fn_error $? "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi if test "$2" = conftest.file || test $am_try -eq 2; then break fi # Just in case. sleep 1 am_has_slept=yes done test "$2" = conftest.file ) then # Ok. : else as_fn_error $? "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= if grep 'slept: no' conftest.file >/dev/null 2>&1; then ( sleep 1 ) & am_sleep_pid=$! fi rm -f conftest.file test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --is-lightweight"; then am_missing_run="$MISSING " else am_missing_run= { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi # Installed binaries are usually stripped using 'strip' when the user # run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the 'STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if ${ac_cv_path_mkdir+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' am__nodep='_no' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi # Check whether --enable-silent-rules was given. if test "${enable_silent_rules+set}" = set; then : enableval=$enable_silent_rules; fi case $enable_silent_rules in # ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=1;; esac am_make=${MAKE-make} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 $as_echo_n "checking whether $am_make supports nested variables... " >&6; } if ${am_cv_make_support_nested_variables+:} false; then : $as_echo_n "(cached) " >&6 else if $as_echo 'TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 $as_echo "$am_cv_make_support_nested_variables" >&6; } if test $am_cv_make_support_nested_variables = yes; then AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AM_BACKSLASH='\' if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE='lightdm-gtk-greeter' VERSION='2.0.5' cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: # # mkdir_p='$(MKDIR_P)' # We need awk for the "check" target (and possibly the TAP driver). The # system "awk" is bad on some platforms. # Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AMTAR='$${TAR-tar}' # We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar plaintar pax cpio none' # The POSIX 1988 'ustar' format is defined with fixed-size fields. # There is notably a 21 bits limit for the UID and the GID. In fact, # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 # and bug#13588). am_max_uid=2097151 # 2^21 - 1 am_max_gid=$am_max_uid # The $UID and $GID variables are not portable, so we need to resort # to the POSIX-mandated id(1) utility. Errors in the 'id' calls # below are definitely unexpected, so allow the users to see them # (that is, avoid stderr redirection). am_uid=`id -u || echo unknown` am_gid=`id -g || echo unknown` { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether UID '$am_uid' is supported by ustar format" >&5 $as_echo_n "checking whether UID '$am_uid' is supported by ustar format... " >&6; } if test $am_uid -le $am_max_uid; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } _am_tools=none fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether GID '$am_gid' is supported by ustar format" >&5 $as_echo_n "checking whether GID '$am_gid' is supported by ustar format... " >&6; } if test $am_gid -le $am_max_gid; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } _am_tools=none fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create a ustar tar archive" >&5 $as_echo_n "checking how to create a ustar tar archive... " >&6; } # Go ahead even if we have the value already cached. We do so because we # need to set the values for the 'am__tar' and 'am__untar' variables. _am_tools=${am_cv_prog_tar_ustar-$_am_tools} for _am_tool in $_am_tools; do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do { echo "$as_me:$LINENO: $_am_tar --version" >&5 ($_am_tar --version) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && break done am__tar="$_am_tar --format=ustar -chf - "'"$$tardir"' am__tar_="$_am_tar --format=ustar -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x ustar -w "$$tardir"' am__tar_='pax -L -x ustar -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H ustar -L' am__tar_='find "$tardir" -print | cpio -o -H ustar -L' am__untar='cpio -i -H ustar -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_ustar}" && break # tar/untar a dummy directory, and stop if the command works. rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file { echo "$as_me:$LINENO: tardir=conftest.dir && eval $am__tar_ >conftest.tar" >&5 (tardir=conftest.dir && eval $am__tar_ >conftest.tar) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } rm -rf conftest.dir if test -s conftest.tar; then { echo "$as_me:$LINENO: $am__untar &5 ($am__untar &5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { echo "$as_me:$LINENO: cat conftest.dir/file" >&5 (cat conftest.dir/file) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } grep GrepMe conftest.dir/file >/dev/null 2>&1 && break fi done rm -rf conftest.dir if ${am_cv_prog_tar_ustar+:} false; then : $as_echo_n "(cached) " >&6 else am_cv_prog_tar_ustar=$_am_tool fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_tar_ustar" >&5 $as_echo "$am_cv_prog_tar_ustar" >&6; } depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if ${am_cv_CC_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named 'D' -- because '-MD' means "put the output # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with # Solaris 10 /bin/sh. echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle '-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # After this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi # POSIX will say in a future version that running "rm -f" with no argument # is OK; and we want to be able to make that assumption in our Makefile # recipes. So use an aggressive probe to check that the usage we want is # actually supported "in the wild" to an acceptable degree. # See automake bug#10828. # To make any issue more visible, cause the running configure to be aborted # by default if the 'rm' program in use doesn't match our expectations; the # user can still override this though. if rm -f && rm -fr && rm -rf; then : OK; else cat >&2 <<'END' Oops! Your 'rm' program seems unable to run without file operands specified on the command line, even when the '-f' option is present. This is contrary to the behaviour of most rm programs out there, and not conforming with the upcoming POSIX standard: Please tell bug-automake@gnu.org about your system, including the value of your $PATH and any error possibly output before this message. This can help us improve future automake versions. END if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then echo 'Configuration will proceed anyway, since you have set the' >&2 echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 echo >&2 else cat >&2 <<'END' Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation that behaves properly: . If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM to "yes", and re-run configure. END as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } # Check whether --enable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then : enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval else USE_MAINTAINER_MODE=yes fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 $as_echo "$USE_MAINTAINER_MODE" >&6; } if test $USE_MAINTAINER_MODE = yes; then MAINTAINER_MODE_TRUE= MAINTAINER_MODE_FALSE='#' else MAINTAINER_MODE_TRUE='#' MAINTAINER_MODE_FALSE= fi MAINT=$MAINTAINER_MODE_TRUE # Use AM_SILENT_RULES if present # Check whether --enable-silent-rules was given. if test "${enable_silent_rules+set}" = set; then : enableval=$enable_silent_rules; fi case $enable_silent_rules in # ((( yes) AM_DEFAULT_VERBOSITY=0;; no) AM_DEFAULT_VERBOSITY=1;; *) AM_DEFAULT_VERBOSITY=0;; esac am_make=${MAKE-make} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 $as_echo_n "checking whether $am_make supports nested variables... " >&6; } if ${am_cv_make_support_nested_variables+:} false; then : $as_echo_n "(cached) " >&6 else if $as_echo 'TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 am__doit: @$(TRUE) .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 $as_echo "$am_cv_make_support_nested_variables" >&6; } if test $am_cv_make_support_nested_variables = yes; then AM_V='$(V)' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi AM_BACKSLASH='\' ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 $as_echo_n "checking whether $CC understands -c and -o together... " >&6; } if ${am_cv_prog_cc_c_o+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF # Make sure it works both with $CC and with simple cc. # Following AC_PROG_CC_C_O, we do the test twice because some # compilers refuse to overwrite an existing .o file with -o, # though they will create one. am_cv_prog_cc_c_o=yes for am_i in 1 2; do if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } \ && test -f conftest2.$ac_objext; then : OK else am_cv_prog_cc_c_o=no break fi done rm -f core conftest* unset am_i fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 $as_echo "$am_cv_prog_cc_c_o" >&6; } if test "$am_cv_prog_cc_c_o" != yes; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_PKG_CONFIG+:} false; then : $as_echo_n "(cached) " >&6 else case $PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi PKG_CONFIG=$ac_cv_path_PKG_CONFIG if test -n "$PKG_CONFIG"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 $as_echo "$PKG_CONFIG" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_PKG_CONFIG"; then ac_pt_PKG_CONFIG=$PKG_CONFIG # Extract the first word of "pkg-config", so it can be a program name with args. set dummy pkg-config; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : $as_echo_n "(cached) " >&6 else case $ac_pt_PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG if test -n "$ac_pt_PKG_CONFIG"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 $as_echo "$ac_pt_PKG_CONFIG" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_PKG_CONFIG" = x; then PKG_CONFIG="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac PKG_CONFIG=$ac_pt_PKG_CONFIG fi else PKG_CONFIG="$ac_cv_path_PKG_CONFIG" fi fi if test -n "$PKG_CONFIG"; then _pkg_min_version=0.9.0 { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 $as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } PKG_CONFIG="" fi fi # Check whether --enable-introspection was given. if test "${enable_introspection+set}" = set; then : enableval=$enable_introspection; else enable_introspection=auto fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gobject-introspection" >&5 $as_echo_n "checking for gobject-introspection... " >&6; } case $enable_introspection in #( no) : found_introspection="no (disabled, use --enable-introspection to enable)" ;; #( yes) : if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gobject-introspection-1.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "gobject-introspection-1.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : else as_fn_error $? "gobject-introspection-1.0 is not installed" "$LINENO" 5 fi if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gobject-introspection-1.0 >= 0.9.5\""; } >&5 ($PKG_CONFIG --exists --print-errors "gobject-introspection-1.0 >= 0.9.5") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then found_introspection=yes else as_fn_error $? "You need to have gobject-introspection >= 0.9.5 installed to build lightdm-gtk-greeter" "$LINENO" 5 fi ;; #( auto) : if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gobject-introspection-1.0 >= 0.9.5\""; } >&5 ($PKG_CONFIG --exists --print-errors "gobject-introspection-1.0 >= 0.9.5") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then found_introspection=yes else found_introspection=no fi enable_introspection=$found_introspection ;; #( *) : as_fn_error $? "invalid argument passed to --enable-introspection, should be one of [no/auto/yes]" "$LINENO" 5 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $found_introspection" >&5 $as_echo "$found_introspection" >&6; } INTROSPECTION_SCANNER= INTROSPECTION_COMPILER= INTROSPECTION_GENERATE= INTROSPECTION_GIRDIR= INTROSPECTION_TYPELIBDIR= if test "x$found_introspection" = "xyes"; then INTROSPECTION_SCANNER=`$PKG_CONFIG --variable=g_ir_scanner gobject-introspection-1.0` INTROSPECTION_COMPILER=`$PKG_CONFIG --variable=g_ir_compiler gobject-introspection-1.0` INTROSPECTION_GENERATE=`$PKG_CONFIG --variable=g_ir_generate gobject-introspection-1.0` INTROSPECTION_GIRDIR=`$PKG_CONFIG --variable=girdir gobject-introspection-1.0` INTROSPECTION_TYPELIBDIR="$($PKG_CONFIG --variable=typelibdir gobject-introspection-1.0)" INTROSPECTION_CFLAGS=`$PKG_CONFIG --cflags gobject-introspection-1.0` INTROSPECTION_LIBS=`$PKG_CONFIG --libs gobject-introspection-1.0` INTROSPECTION_MAKEFILE=`$PKG_CONFIG --variable=datadir gobject-introspection-1.0`/gobject-introspection-1.0/Makefile.introspection fi if test "x$found_introspection" = "xyes"; then HAVE_INTROSPECTION_TRUE= HAVE_INTROSPECTION_FALSE='#' else HAVE_INTROSPECTION_TRUE='#' HAVE_INTROSPECTION_FALSE= fi for ac_header in stdlib.h do : ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default" if test "x$ac_cv_header_stdlib_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_STDLIB_H 1 _ACEOF fi done pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTK" >&5 $as_echo_n "checking for GTK... " >&6; } if test -n "$GTK_CFLAGS"; then pkg_cv_GTK_CFLAGS="$GTK_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-3.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "gtk+-3.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GTK_CFLAGS=`$PKG_CONFIG --cflags "gtk+-3.0" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$GTK_LIBS"; then pkg_cv_GTK_LIBS="$GTK_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-3.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "gtk+-3.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GTK_LIBS=`$PKG_CONFIG --libs "gtk+-3.0" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then GTK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gtk+-3.0" 2>&1` else GTK_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gtk+-3.0" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$GTK_PKG_ERRORS" >&5 as_fn_error $? "Package requirements (gtk+-3.0) were not met: $GTK_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables GTK_CFLAGS and GTK_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables GTK_CFLAGS and GTK_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details" "$LINENO" 5; } else GTK_CFLAGS=$pkg_cv_GTK_CFLAGS GTK_LIBS=$pkg_cv_GTK_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GMODULE" >&5 $as_echo_n "checking for GMODULE... " >&6; } if test -n "$GMODULE_CFLAGS"; then pkg_cv_GMODULE_CFLAGS="$GMODULE_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gmodule-export-2.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "gmodule-export-2.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GMODULE_CFLAGS=`$PKG_CONFIG --cflags "gmodule-export-2.0" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$GMODULE_LIBS"; then pkg_cv_GMODULE_LIBS="$GMODULE_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gmodule-export-2.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "gmodule-export-2.0") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GMODULE_LIBS=`$PKG_CONFIG --libs "gmodule-export-2.0" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then GMODULE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gmodule-export-2.0" 2>&1` else GMODULE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gmodule-export-2.0" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$GMODULE_PKG_ERRORS" >&5 as_fn_error $? "Package requirements (gmodule-export-2.0) were not met: $GMODULE_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables GMODULE_CFLAGS and GMODULE_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables GMODULE_CFLAGS and GMODULE_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details" "$LINENO" 5; } else GMODULE_CFLAGS=$pkg_cv_GMODULE_CFLAGS GMODULE_LIBS=$pkg_cv_GMODULE_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIGHTDMGOBJECT" >&5 $as_echo_n "checking for LIGHTDMGOBJECT... " >&6; } if test -n "$LIGHTDMGOBJECT_CFLAGS"; then pkg_cv_LIGHTDMGOBJECT_CFLAGS="$LIGHTDMGOBJECT_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblightdm-gobject-1 >= 1.19.2\""; } >&5 ($PKG_CONFIG --exists --print-errors "liblightdm-gobject-1 >= 1.19.2") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_LIGHTDMGOBJECT_CFLAGS=`$PKG_CONFIG --cflags "liblightdm-gobject-1 >= 1.19.2" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$LIGHTDMGOBJECT_LIBS"; then pkg_cv_LIGHTDMGOBJECT_LIBS="$LIGHTDMGOBJECT_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblightdm-gobject-1 >= 1.19.2\""; } >&5 ($PKG_CONFIG --exists --print-errors "liblightdm-gobject-1 >= 1.19.2") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_LIGHTDMGOBJECT_LIBS=`$PKG_CONFIG --libs "liblightdm-gobject-1 >= 1.19.2" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then LIGHTDMGOBJECT_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblightdm-gobject-1 >= 1.19.2" 2>&1` else LIGHTDMGOBJECT_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblightdm-gobject-1 >= 1.19.2" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$LIGHTDMGOBJECT_PKG_ERRORS" >&5 pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIGHTDMGOBJECT" >&5 $as_echo_n "checking for LIGHTDMGOBJECT... " >&6; } if test -n "$LIGHTDMGOBJECT_CFLAGS"; then pkg_cv_LIGHTDMGOBJECT_CFLAGS="$LIGHTDMGOBJECT_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblightdm-gobject-1 >= 1.3.5\""; } >&5 ($PKG_CONFIG --exists --print-errors "liblightdm-gobject-1 >= 1.3.5") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_LIGHTDMGOBJECT_CFLAGS=`$PKG_CONFIG --cflags "liblightdm-gobject-1 >= 1.3.5" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$LIGHTDMGOBJECT_LIBS"; then pkg_cv_LIGHTDMGOBJECT_LIBS="$LIGHTDMGOBJECT_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblightdm-gobject-1 >= 1.3.5\""; } >&5 ($PKG_CONFIG --exists --print-errors "liblightdm-gobject-1 >= 1.3.5") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_LIGHTDMGOBJECT_LIBS=`$PKG_CONFIG --libs "liblightdm-gobject-1 >= 1.3.5" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then LIGHTDMGOBJECT_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblightdm-gobject-1 >= 1.3.5" 2>&1` else LIGHTDMGOBJECT_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblightdm-gobject-1 >= 1.3.5" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$LIGHTDMGOBJECT_PKG_ERRORS" >&5 as_fn_error $? "Package requirements (liblightdm-gobject-1 >= 1.3.5) were not met: $LIGHTDMGOBJECT_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIGHTDMGOBJECT_CFLAGS and LIGHTDMGOBJECT_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables LIGHTDMGOBJECT_CFLAGS and LIGHTDMGOBJECT_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details" "$LINENO" 5; } else LIGHTDMGOBJECT_CFLAGS=$pkg_cv_LIGHTDMGOBJECT_CFLAGS LIGHTDMGOBJECT_LIBS=$pkg_cv_LIGHTDMGOBJECT_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIGHTDMGOBJECT" >&5 $as_echo_n "checking for LIGHTDMGOBJECT... " >&6; } if test -n "$LIGHTDMGOBJECT_CFLAGS"; then pkg_cv_LIGHTDMGOBJECT_CFLAGS="$LIGHTDMGOBJECT_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblightdm-gobject-1 >= 1.3.5\""; } >&5 ($PKG_CONFIG --exists --print-errors "liblightdm-gobject-1 >= 1.3.5") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_LIGHTDMGOBJECT_CFLAGS=`$PKG_CONFIG --cflags "liblightdm-gobject-1 >= 1.3.5" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$LIGHTDMGOBJECT_LIBS"; then pkg_cv_LIGHTDMGOBJECT_LIBS="$LIGHTDMGOBJECT_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblightdm-gobject-1 >= 1.3.5\""; } >&5 ($PKG_CONFIG --exists --print-errors "liblightdm-gobject-1 >= 1.3.5") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_LIGHTDMGOBJECT_LIBS=`$PKG_CONFIG --libs "liblightdm-gobject-1 >= 1.3.5" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then LIGHTDMGOBJECT_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblightdm-gobject-1 >= 1.3.5" 2>&1` else LIGHTDMGOBJECT_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblightdm-gobject-1 >= 1.3.5" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$LIGHTDMGOBJECT_PKG_ERRORS" >&5 as_fn_error $? "Package requirements (liblightdm-gobject-1 >= 1.3.5) were not met: $LIGHTDMGOBJECT_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIGHTDMGOBJECT_CFLAGS and LIGHTDMGOBJECT_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables LIGHTDMGOBJECT_CFLAGS and LIGHTDMGOBJECT_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details" "$LINENO" 5; } else LIGHTDMGOBJECT_CFLAGS=$pkg_cv_LIGHTDMGOBJECT_CFLAGS LIGHTDMGOBJECT_LIBS=$pkg_cv_LIGHTDMGOBJECT_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi else LIGHTDMGOBJECT_CFLAGS=$pkg_cv_LIGHTDMGOBJECT_CFLAGS LIGHTDMGOBJECT_LIBS=$pkg_cv_LIGHTDMGOBJECT_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } $as_echo "#define HAVE_LIBLIGHTDMGOBJECT_1_19_2 1" >>confdefs.h fi pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBX11" >&5 $as_echo_n "checking for LIBX11... " >&6; } if test -n "$LIBX11_CFLAGS"; then pkg_cv_LIBX11_CFLAGS="$LIBX11_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"x11\""; } >&5 ($PKG_CONFIG --exists --print-errors "x11") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_LIBX11_CFLAGS=`$PKG_CONFIG --cflags "x11" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$LIBX11_LIBS"; then pkg_cv_LIBX11_LIBS="$LIBX11_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"x11\""; } >&5 ($PKG_CONFIG --exists --print-errors "x11") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_LIBX11_LIBS=`$PKG_CONFIG --libs "x11" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then LIBX11_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "x11" 2>&1` else LIBX11_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "x11" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$LIBX11_PKG_ERRORS" >&5 as_fn_error $? "Package requirements (x11) were not met: $LIBX11_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBX11_CFLAGS and LIBX11_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables LIBX11_CFLAGS and LIBX11_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details" "$LINENO" 5; } else LIBX11_CFLAGS=$pkg_cv_LIBX11_CFLAGS LIBX11_LIBS=$pkg_cv_LIBX11_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi # Extract the first word of "exo-csource", so it can be a program name with args. set dummy exo-csource; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_HAVE_EXO_CSOURCE+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$HAVE_EXO_CSOURCE"; then ac_cv_prog_HAVE_EXO_CSOURCE="$HAVE_EXO_CSOURCE" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_HAVE_EXO_CSOURCE="yes" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi HAVE_EXO_CSOURCE=$ac_cv_prog_HAVE_EXO_CSOURCE if test -n "$HAVE_EXO_CSOURCE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HAVE_EXO_CSOURCE" >&5 $as_echo "$HAVE_EXO_CSOURCE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test x"$HAVE_EXO_CSOURCE" != xyes; then { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "exo-csource not installed See \`config.log' for more details" "$LINENO" 5; } fi INDICATOR_REQUIRED_VERSION=0.3.92 INDICATOR_PKG=indicator3-0.4 IDO_PKG=libido3-0.1 # Check whether --enable-libindicator was given. if test "${enable_libindicator+set}" = set; then : enableval=$enable_libindicator; else enable_libindicator=yes fi if test "x$enable_libindicator" = "xyes"; then : if $PKG_CONFIG --exists "$INDICATOR_PKG >= $INDICATOR_REQUIRED_VERSION" >/dev/null 2>&1; then : pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBINDICATOR" >&5 $as_echo_n "checking for LIBINDICATOR... " >&6; } if test -n "$LIBINDICATOR_CFLAGS"; then pkg_cv_LIBINDICATOR_CFLAGS="$LIBINDICATOR_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$INDICATOR_PKG >= \$INDICATOR_REQUIRED_VERSION\""; } >&5 ($PKG_CONFIG --exists --print-errors "$INDICATOR_PKG >= $INDICATOR_REQUIRED_VERSION") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_LIBINDICATOR_CFLAGS=`$PKG_CONFIG --cflags "$INDICATOR_PKG >= $INDICATOR_REQUIRED_VERSION" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$LIBINDICATOR_LIBS"; then pkg_cv_LIBINDICATOR_LIBS="$LIBINDICATOR_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$INDICATOR_PKG >= \$INDICATOR_REQUIRED_VERSION\""; } >&5 ($PKG_CONFIG --exists --print-errors "$INDICATOR_PKG >= $INDICATOR_REQUIRED_VERSION") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_LIBINDICATOR_LIBS=`$PKG_CONFIG --libs "$INDICATOR_PKG >= $INDICATOR_REQUIRED_VERSION" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then LIBINDICATOR_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$INDICATOR_PKG >= $INDICATOR_REQUIRED_VERSION" 2>&1` else LIBINDICATOR_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$INDICATOR_PKG >= $INDICATOR_REQUIRED_VERSION" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$LIBINDICATOR_PKG_ERRORS" >&5 as_fn_error $? "Package requirements ($INDICATOR_PKG >= $INDICATOR_REQUIRED_VERSION) were not met: $LIBINDICATOR_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBINDICATOR_CFLAGS and LIBINDICATOR_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables LIBINDICATOR_CFLAGS and LIBINDICATOR_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details" "$LINENO" 5; } else LIBINDICATOR_CFLAGS=$pkg_cv_LIBINDICATOR_CFLAGS LIBINDICATOR_LIBS=$pkg_cv_LIBINDICATOR_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } have_libindicator=yes INDICATORDIR=`$PKG_CONFIG --variable=indicatordir $INDICATOR_PKG` UNITY_INDICATORDIR="${prefix}/share/unity/indicators" $as_echo "#define HAVE_LIBINDICATOR 1" >>confdefs.h CPPFLAGS_OLD="$CPPFLAGS" CPPFLAGS=`$PKG_CONFIG --cflags ${INDICATOR_PKG}` ac_fn_c_check_header_preproc "$LINENO" "libindicator/indicator-ng.h" "ac_cv_header_libindicator_indicator_ng_h" if test "x$ac_cv_header_libindicator_indicator_ng_h" = xyes; then : $as_echo "#define HAVE_LIBINDICATOR_NG /**/" >>confdefs.h fi CPPFLAGS="$CPPFLAGS_OLD" fi else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for optional package $INDICATOR_PKG" >&5 $as_echo_n "checking for optional package $INDICATOR_PKG... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5 $as_echo "not found" >&6; } fi else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for optional package $INDICATOR_PKG" >&5 $as_echo_n "checking for optional package $INDICATOR_PKG... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5 $as_echo "disabled" >&6; } fi # Check whether --enable-libido was given. if test "${enable_libido+set}" = set; then : enableval=$enable_libido; else enable_libido=yes fi if test "x$enable_libido" = "xyes" && test "x$have_libindicator" = "xyes"; then : if $PKG_CONFIG --exists "$IDO_PKG" >/dev/null 2>&1; then : pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBIDO" >&5 $as_echo_n "checking for LIBIDO... " >&6; } if test -n "$LIBIDO_CFLAGS"; then pkg_cv_LIBIDO_CFLAGS="$LIBIDO_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$IDO_PKG >= 13.10\""; } >&5 ($PKG_CONFIG --exists --print-errors "$IDO_PKG >= 13.10") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_LIBIDO_CFLAGS=`$PKG_CONFIG --cflags "$IDO_PKG >= 13.10" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$LIBIDO_LIBS"; then pkg_cv_LIBIDO_LIBS="$LIBIDO_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$IDO_PKG >= 13.10\""; } >&5 ($PKG_CONFIG --exists --print-errors "$IDO_PKG >= 13.10") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_LIBIDO_LIBS=`$PKG_CONFIG --libs "$IDO_PKG >= 13.10" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then LIBIDO_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$IDO_PKG >= 13.10" 2>&1` else LIBIDO_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$IDO_PKG >= 13.10" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$LIBIDO_PKG_ERRORS" >&5 as_fn_error $? "Package requirements ($IDO_PKG >= 13.10) were not met: $LIBIDO_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBIDO_CFLAGS and LIBIDO_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables LIBIDO_CFLAGS and LIBIDO_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details" "$LINENO" 5; } else LIBIDO_CFLAGS=$pkg_cv_LIBIDO_CFLAGS LIBIDO_LIBS=$pkg_cv_LIBIDO_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } $as_echo "#define HAVE_LIBIDO 1" >>confdefs.h fi else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for optional package $IDO_PKG" >&5 $as_echo_n "checking for optional package $IDO_PKG... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5 $as_echo "not found" >&6; } fi else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for optional package $IDO_PKG" >&5 $as_echo_n "checking for optional package $IDO_PKG... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5 $as_echo "disabled" >&6; } fi # Check whether --with-libxklavier was given. if test "${with_libxklavier+set}" = set; then : withval=$with_libxklavier; fi if test "x$with_libxklavier" = "xyes"; then : pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBXKLAVIER" >&5 $as_echo_n "checking for LIBXKLAVIER... " >&6; } if test -n "$LIBXKLAVIER_CFLAGS"; then pkg_cv_LIBXKLAVIER_CFLAGS="$LIBXKLAVIER_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libxklavier\""; } >&5 ($PKG_CONFIG --exists --print-errors "libxklavier") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_LIBXKLAVIER_CFLAGS=`$PKG_CONFIG --cflags "libxklavier" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test -n "$LIBXKLAVIER_LIBS"; then pkg_cv_LIBXKLAVIER_LIBS="$LIBXKLAVIER_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libxklavier\""; } >&5 ($PKG_CONFIG --exists --print-errors "libxklavier") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_LIBXKLAVIER_LIBS=`$PKG_CONFIG --libs "libxklavier" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi else pkg_failed=untried fi if test $pkg_failed = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then LIBXKLAVIER_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libxklavier" 2>&1` else LIBXKLAVIER_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libxklavier" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$LIBXKLAVIER_PKG_ERRORS" >&5 as_fn_error $? "Package requirements (libxklavier) were not met: $LIBXKLAVIER_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBXKLAVIER_CFLAGS and LIBXKLAVIER_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables LIBXKLAVIER_CFLAGS and LIBXKLAVIER_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details" "$LINENO" 5; } else LIBXKLAVIER_CFLAGS=$pkg_cv_LIBXKLAVIER_CFLAGS LIBXKLAVIER_LIBS=$pkg_cv_LIBXKLAVIER_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } have_xklavier=yes fi $as_echo "#define HAVE_LIBXKLAVIER 1" >>confdefs.h fi # Check whether --enable-at-spi-command was given. if test "${enable_at_spi_command+set}" = set; then : enableval=$enable_at_spi_command; fi if test "x$enable_at_spi_command" != "xno"; then : if test "x$enable_at_spi_command" = "xyes" || test "x$enable_at_spi_command" = "x"; then enable_at_spi_command="/usr/lib/at-spi2-core/at-spi-bus-launcher --launch-immediately" fi cat >>confdefs.h <<_ACEOF #define AT_SPI_COMMAND "$enable_at_spi_command" _ACEOF fi # Check whether --enable-indicator-services-command was given. if test "${enable_indicator_services_command+set}" = set; then : enableval=$enable_indicator_services_command; fi if test "x$enable_indicator_services_command" != "xno"; then : if test "x$enable_indicator_services_command" = "xyes" || test "x$enable_indicator_services_command" = "x"; then enable_indicator_services_command="upstart --user --startup-event indicator-services-start" fi cat >>confdefs.h <<_ACEOF #define INDICATOR_SERVICES_COMMAND "$enable_indicator_services_command" _ACEOF fi # Check whether --enable-kill-on-sigterm was given. if test "${enable_kill_on_sigterm+set}" = set; then : enableval=$enable_kill_on_sigterm; else enable_kill_on_sigterm=no fi if test "x$enable_kill_on_sigterm" = "xyes"; then : $as_echo "#define KILL_ON_SIGTERM 1" >>confdefs.h fi GETTEXT_PACKAGE="lightdm-gtk-greeter" cat >>confdefs.h <<_ACEOF #define GETTEXT_PACKAGE "$GETTEXT_PACKAGE" _ACEOF { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 $as_echo_n "checking whether NLS is requested... " >&6; } # Check whether --enable-nls was given. if test "${enable_nls+set}" = set; then : enableval=$enable_nls; USE_NLS=$enableval else USE_NLS=yes fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 $as_echo "$USE_NLS" >&6; } GETTEXT_MACRO_VERSION=0.19 # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which # contains only /bin. Note that ksh looks also at the FPATH variable, # so we have to set that as well for the test. PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ || PATH_SEPARATOR=';' } fi # Find out how to test for executable files. Don't use a zero-byte file, # as systems may use methods other than mode bits to determine executability. cat >conf$$.file <<_ASEOF #! /bin/sh exit 0 _ASEOF chmod +x conf$$.file if test -x conf$$.file >/dev/null 2>&1; then ac_executable_p="test -x" else ac_executable_p="test -f" fi rm -f conf$$.file # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_MSGFMT+:} false; then : $as_echo_n "(cached) " >&6 else case "$MSGFMT" in [\\/]* | ?:[\\/]*) ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ;; *) ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$ac_save_IFS" test -z "$ac_dir" && ac_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then echo "$as_me: trying $ac_dir/$ac_word..." >&5 if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 && (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext" break 2 fi fi done done IFS="$ac_save_IFS" test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":" ;; esac fi MSGFMT="$ac_cv_path_MSGFMT" if test "$MSGFMT" != ":"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 $as_echo "$MSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_GMSGFMT+:} false; then : $as_echo_n "(cached) " >&6 else case $GMSGFMT in [\\/]* | ?:[\\/]*) ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ;; esac fi GMSGFMT=$ac_cv_path_GMSGFMT if test -n "$GMSGFMT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 $as_echo "$GMSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; *) MSGFMT_015=$MSGFMT ;; esac case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; *) GMSGFMT_015=$GMSGFMT ;; esac # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which # contains only /bin. Note that ksh looks also at the FPATH variable, # so we have to set that as well for the test. PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ || PATH_SEPARATOR=';' } fi # Find out how to test for executable files. Don't use a zero-byte file, # as systems may use methods other than mode bits to determine executability. cat >conf$$.file <<_ASEOF #! /bin/sh exit 0 _ASEOF chmod +x conf$$.file if test -x conf$$.file >/dev/null 2>&1; then ac_executable_p="test -x" else ac_executable_p="test -f" fi rm -f conf$$.file # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_XGETTEXT+:} false; then : $as_echo_n "(cached) " >&6 else case "$XGETTEXT" in [\\/]* | ?:[\\/]*) ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ;; *) ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$ac_save_IFS" test -z "$ac_dir" && ac_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then echo "$as_me: trying $ac_dir/$ac_word..." >&5 if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 && (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext" break 2 fi fi done done IFS="$ac_save_IFS" test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" ;; esac fi XGETTEXT="$ac_cv_path_XGETTEXT" if test "$XGETTEXT" != ":"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 $as_echo "$XGETTEXT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi rm -f messages.po case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; *) XGETTEXT_015=$XGETTEXT ;; esac # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which # contains only /bin. Note that ksh looks also at the FPATH variable, # so we have to set that as well for the test. PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ || PATH_SEPARATOR=';' } fi # Find out how to test for executable files. Don't use a zero-byte file, # as systems may use methods other than mode bits to determine executability. cat >conf$$.file <<_ASEOF #! /bin/sh exit 0 _ASEOF chmod +x conf$$.file if test -x conf$$.file >/dev/null 2>&1; then ac_executable_p="test -x" else ac_executable_p="test -f" fi rm -f conf$$.file # Extract the first word of "msgmerge", so it can be a program name with args. set dummy msgmerge; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_path_MSGMERGE+:} false; then : $as_echo_n "(cached) " >&6 else case "$MSGMERGE" in [\\/]* | ?:[\\/]*) ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. ;; *) ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$ac_save_IFS" test -z "$ac_dir" && ac_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then echo "$as_me: trying $ac_dir/$ac_word..." >&5 if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext" break 2 fi fi done done IFS="$ac_save_IFS" test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":" ;; esac fi MSGMERGE="$ac_cv_path_MSGMERGE" if test "$MSGMERGE" != ":"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 $as_echo "$MSGMERGE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$localedir" || localedir='${datadir}/locale' test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= ac_config_commands="$ac_config_commands po-directories" if test "X$prefix" = "XNONE"; then acl_final_prefix="$ac_default_prefix" else acl_final_prefix="$prefix" fi if test "X$exec_prefix" = "XNONE"; then acl_final_exec_prefix='${prefix}' else acl_final_exec_prefix="$exec_prefix" fi acl_save_prefix="$prefix" prefix="$acl_final_prefix" eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" prefix="$acl_save_prefix" # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which # contains only /bin. Note that ksh looks also at the FPATH variable, # so we have to set that as well for the test. PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ || PATH_SEPARATOR=';' } fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`echo "$ac_prog"| sed 's%\\\\%/%g'` while echo "$ac_prog" | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if ${acl_cv_path_LD+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$acl_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then acl_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$acl_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if ${acl_cv_prog_gnu_ld+:} false; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 $as_echo "$acl_cv_prog_gnu_ld" >&6; } with_gnu_ld=$acl_cv_prog_gnu_ld { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5 $as_echo_n "checking for shared library run path origin... " >&6; } if ${acl_cv_rpath+:} false; then : $as_echo_n "(cached) " >&6 else CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh . ./conftest.sh rm -f ./conftest.sh acl_cv_rpath=done fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5 $as_echo "$acl_cv_rpath" >&6; } wl="$acl_cv_wl" acl_libext="$acl_cv_libext" acl_shlibext="$acl_cv_shlibext" acl_libname_spec="$acl_cv_libname_spec" acl_library_names_spec="$acl_cv_library_names_spec" acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" acl_hardcode_direct="$acl_cv_hardcode_direct" acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" # Check whether --enable-rpath was given. if test "${enable_rpath+set}" = set; then : enableval=$enable_rpath; : else enable_rpath=yes fi acl_libdirstem=lib acl_libdirstem2= case "$host_os" in solaris*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5 $as_echo_n "checking for 64-bit host... " >&6; } if ${gl_cv_solaris_64bit+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef _LP64 sixtyfour bits #endif _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "sixtyfour bits" >/dev/null 2>&1; then : gl_cv_solaris_64bit=yes else gl_cv_solaris_64bit=no fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5 $as_echo "$gl_cv_solaris_64bit" >&6; } if test $gl_cv_solaris_64bit = yes; then acl_libdirstem=lib/64 case "$host_cpu" in sparc*) acl_libdirstem2=lib/sparcv9 ;; i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; esac fi ;; *) searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` if test -n "$searchpath"; then acl_save_IFS="${IFS= }"; IFS=":" for searchdir in $searchpath; do if test -d "$searchdir"; then case "$searchdir" in */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; */../ | */.. ) # Better ignore directories of this form. They are misleading. ;; *) searchdir=`cd "$searchdir" && pwd` case "$searchdir" in */lib64 ) acl_libdirstem=lib64 ;; esac ;; esac fi done IFS="$acl_save_IFS" fi ;; esac test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" use_additional=yes acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" # Check whether --with-libiconv-prefix was given. if test "${with_libiconv_prefix+set}" = set; then : withval=$with_libiconv_prefix; if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" else additional_includedir="$withval/include" additional_libdir="$withval/$acl_libdirstem" if test "$acl_libdirstem2" != "$acl_libdirstem" \ && ! test -d "$withval/$acl_libdirstem"; then additional_libdir="$withval/$acl_libdirstem2" fi fi fi fi LIBICONV= LTLIBICONV= INCICONV= LIBICONV_PREFIX= HAVE_LIBICONV= rpathdirs= ltrpathdirs= names_already_handled= names_next_round='iconv ' while test -n "$names_next_round"; do names_this_round="$names_next_round" names_next_round= for name in $names_this_round; do already_handled= for n in $names_already_handled; do if test "$n" = "$name"; then already_handled=yes break fi done if test -z "$already_handled"; then names_already_handled="$names_already_handled $name" uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` eval value=\"\$HAVE_LIB$uppername\" if test -n "$value"; then if test "$value" = yes; then eval value=\"\$LIB$uppername\" test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value" eval value=\"\$LTLIB$uppername\" test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value" else : fi else found_dir= found_la= found_so= found_a= eval libname=\"$acl_libname_spec\" # typically: libname=lib$name if test -n "$acl_shlibext"; then shrext=".$acl_shlibext" # typically: shrext=.so else shrext= fi if test $use_additional = yes; then dir="$additional_libdir" if test -n "$acl_shlibext"; then if test -f "$dir/$libname$shrext"; then found_dir="$dir" found_so="$dir/$libname$shrext" else if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ver=`(cd "$dir" && \ for f in "$libname$shrext".*; do echo "$f"; done \ | sed -e "s,^$libname$shrext\\\\.,," \ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ | sed 1q ) 2>/dev/null` if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then found_dir="$dir" found_so="$dir/$libname$shrext.$ver" fi else eval library_names=\"$acl_library_names_spec\" for f in $library_names; do if test -f "$dir/$f"; then found_dir="$dir" found_so="$dir/$f" break fi done fi fi fi if test "X$found_dir" = "X"; then if test -f "$dir/$libname.$acl_libext"; then found_dir="$dir" found_a="$dir/$libname.$acl_libext" fi fi if test "X$found_dir" != "X"; then if test -f "$dir/$libname.la"; then found_la="$dir/$libname.la" fi fi fi if test "X$found_dir" = "X"; then for x in $LDFLAGS $LTLIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" case "$x" in -L*) dir=`echo "X$x" | sed -e 's/^X-L//'` if test -n "$acl_shlibext"; then if test -f "$dir/$libname$shrext"; then found_dir="$dir" found_so="$dir/$libname$shrext" else if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ver=`(cd "$dir" && \ for f in "$libname$shrext".*; do echo "$f"; done \ | sed -e "s,^$libname$shrext\\\\.,," \ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ | sed 1q ) 2>/dev/null` if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then found_dir="$dir" found_so="$dir/$libname$shrext.$ver" fi else eval library_names=\"$acl_library_names_spec\" for f in $library_names; do if test -f "$dir/$f"; then found_dir="$dir" found_so="$dir/$f" break fi done fi fi fi if test "X$found_dir" = "X"; then if test -f "$dir/$libname.$acl_libext"; then found_dir="$dir" found_a="$dir/$libname.$acl_libext" fi fi if test "X$found_dir" != "X"; then if test -f "$dir/$libname.la"; then found_la="$dir/$libname.la" fi fi ;; esac if test "X$found_dir" != "X"; then break fi done fi if test "X$found_dir" != "X"; then LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name" if test "X$found_so" != "X"; then if test "$enable_rpath" = no \ || test "X$found_dir" = "X/usr/$acl_libdirstem" \ || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" else haveit= for x in $ltrpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $found_dir" fi if test "$acl_hardcode_direct" = yes; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" else if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" haveit= for x in $rpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $found_dir" fi else haveit= for x in $LDFLAGS $LIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir" fi if test "$acl_hardcode_minus_L" != no; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" else LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" fi fi fi fi else if test "X$found_a" != "X"; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a" else LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name" fi fi additional_includedir= case "$found_dir" in */$acl_libdirstem | */$acl_libdirstem/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` if test "$name" = 'iconv'; then LIBICONV_PREFIX="$basedir" fi additional_includedir="$basedir/include" ;; */$acl_libdirstem2 | */$acl_libdirstem2/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` if test "$name" = 'iconv'; then LIBICONV_PREFIX="$basedir" fi additional_includedir="$basedir/include" ;; esac if test "X$additional_includedir" != "X"; then if test "X$additional_includedir" != "X/usr/include"; then haveit= if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then for x in $CPPFLAGS $INCICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_includedir"; then INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir" fi fi fi fi fi if test -n "$found_la"; then save_libdir="$libdir" case "$found_la" in */* | *\\*) . "$found_la" ;; *) . "./$found_la" ;; esac libdir="$save_libdir" for dep in $dependency_libs; do case "$dep" in -L*) additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then haveit= if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then haveit= for x in $LDFLAGS $LIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir" fi fi haveit= for x in $LDFLAGS $LTLIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir" fi fi fi fi ;; -R*) dir=`echo "X$dep" | sed -e 's/^X-R//'` if test "$enable_rpath" != no; then haveit= for x in $rpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $dir" fi haveit= for x in $ltrpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $dir" fi fi ;; -l*) names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ;; *.la) names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ;; *) LIBICONV="${LIBICONV}${LIBICONV:+ }$dep" LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep" ;; esac done fi else LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name" fi fi fi done done if test "X$rpathdirs" != "X"; then if test -n "$acl_hardcode_libdir_separator"; then alldirs= for found_dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" done acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" else for found_dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$found_dir" eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" done fi fi if test "X$ltrpathdirs" != "X"; then for found_dir in $ltrpathdirs; do LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir" done fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5 $as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; } if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then : $as_echo_n "(cached) " >&6 else gt_save_LIBS="$LIBS" LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { CFPreferencesCopyAppValue(NULL, NULL) ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : gt_cv_func_CFPreferencesCopyAppValue=yes else gt_cv_func_CFPreferencesCopyAppValue=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS="$gt_save_LIBS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5 $as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; } if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then $as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5 $as_echo_n "checking for CFLocaleCopyCurrent... " >&6; } if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then : $as_echo_n "(cached) " >&6 else gt_save_LIBS="$LIBS" LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { CFLocaleCopyCurrent(); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : gt_cv_func_CFLocaleCopyCurrent=yes else gt_cv_func_CFLocaleCopyCurrent=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS="$gt_save_LIBS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5 $as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; } if test $gt_cv_func_CFLocaleCopyCurrent = yes; then $as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h fi INTL_MACOSX_LIBS= if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" fi LIBINTL= LTLIBINTL= POSUB= case " $gt_needs " in *" need-formatstring-macros "*) gt_api_version=3 ;; *" need-ngettext "*) gt_api_version=2 ;; *) gt_api_version=1 ;; esac gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" if test "$USE_NLS" = "yes"; then gt_use_preinstalled_gnugettext=no if test $gt_api_version -ge 3; then gt_revision_test_code=' #ifndef __GNU_GETTEXT_SUPPORTED_REVISION #define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) #endif typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; ' else gt_revision_test_code= fi if test $gt_api_version -ge 2; then gt_expression_test_code=' + * ngettext ("", "", 0)' else gt_expression_test_code= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5 $as_echo_n "checking for GNU gettext in libc... " >&6; } if eval \${$gt_func_gnugettext_libc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #ifndef __GNU_GETTEXT_SUPPORTED_REVISION extern int _nl_msg_cat_cntr; extern int *_nl_domain_bindings; #define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_domain_bindings) #else #define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 #endif $gt_revision_test_code int main () { bindtextdomain ("", ""); return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$gt_func_gnugettext_libc=yes" else eval "$gt_func_gnugettext_libc=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$gt_func_gnugettext_libc { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then am_save_CPPFLAGS="$CPPFLAGS" for element in $INCICONV; do haveit= for x in $CPPFLAGS; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X$element"; then haveit=yes break fi done if test -z "$haveit"; then CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5 $as_echo_n "checking for iconv... " >&6; } if ${am_cv_func_iconv+:} false; then : $as_echo_n "(cached) " >&6 else am_cv_func_iconv="no, consider installing GNU libiconv" am_cv_lib_iconv=no cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : am_cv_func_iconv=yes fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test "$am_cv_func_iconv" != yes; then am_save_LIBS="$LIBS" LIBS="$LIBS $LIBICONV" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : am_cv_lib_iconv=yes am_cv_func_iconv=yes fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS="$am_save_LIBS" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5 $as_echo "$am_cv_func_iconv" >&6; } if test "$am_cv_func_iconv" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5 $as_echo_n "checking for working iconv... " >&6; } if ${am_cv_func_iconv_works+:} false; then : $as_echo_n "(cached) " >&6 else am_save_LIBS="$LIBS" if test $am_cv_lib_iconv = yes; then LIBS="$LIBS $LIBICONV" fi am_cv_func_iconv_works=no for ac_iconv_const in '' 'const'; do if test "$cross_compiling" = yes; then : case "$host_os" in aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; *) am_cv_func_iconv_works="guessing yes" ;; esac else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #ifndef ICONV_CONST # define ICONV_CONST $ac_iconv_const #endif int main () { int result = 0; /* Test against AIX 5.1 bug: Failures are not distinguishable from successful returns. */ { iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); if (cd_utf8_to_88591 != (iconv_t)(-1)) { static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */ char buf[10]; ICONV_CONST char *inptr = input; size_t inbytesleft = strlen (input); char *outptr = buf; size_t outbytesleft = sizeof (buf); size_t res = iconv (cd_utf8_to_88591, &inptr, &inbytesleft, &outptr, &outbytesleft); if (res == 0) result |= 1; iconv_close (cd_utf8_to_88591); } } /* Test against Solaris 10 bug: Failures are not distinguishable from successful returns. */ { iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); if (cd_ascii_to_88591 != (iconv_t)(-1)) { static ICONV_CONST char input[] = "\263"; char buf[10]; ICONV_CONST char *inptr = input; size_t inbytesleft = strlen (input); char *outptr = buf; size_t outbytesleft = sizeof (buf); size_t res = iconv (cd_ascii_to_88591, &inptr, &inbytesleft, &outptr, &outbytesleft); if (res == 0) result |= 2; iconv_close (cd_ascii_to_88591); } } /* Test against AIX 6.1..7.1 bug: Buffer overrun. */ { iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1"); if (cd_88591_to_utf8 != (iconv_t)(-1)) { static ICONV_CONST char input[] = "\304"; static char buf[2] = { (char)0xDE, (char)0xAD }; ICONV_CONST char *inptr = input; size_t inbytesleft = 1; char *outptr = buf; size_t outbytesleft = 1; size_t res = iconv (cd_88591_to_utf8, &inptr, &inbytesleft, &outptr, &outbytesleft); if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD) result |= 4; iconv_close (cd_88591_to_utf8); } } #if 0 /* This bug could be worked around by the caller. */ /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ { iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); if (cd_88591_to_utf8 != (iconv_t)(-1)) { static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; char buf[50]; ICONV_CONST char *inptr = input; size_t inbytesleft = strlen (input); char *outptr = buf; size_t outbytesleft = sizeof (buf); size_t res = iconv (cd_88591_to_utf8, &inptr, &inbytesleft, &outptr, &outbytesleft); if ((int)res > 0) result |= 8; iconv_close (cd_88591_to_utf8); } } #endif /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is provided. */ if (/* Try standardized names. */ iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) /* Try IRIX, OSF/1 names. */ && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) /* Try AIX names. */ && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) /* Try HP-UX names. */ && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) result |= 16; return result; ; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : am_cv_func_iconv_works=yes fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi test "$am_cv_func_iconv_works" = no || break done LIBS="$am_save_LIBS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5 $as_echo "$am_cv_func_iconv_works" >&6; } case "$am_cv_func_iconv_works" in *no) am_func_iconv=no am_cv_lib_iconv=no ;; *) am_func_iconv=yes ;; esac else am_func_iconv=no am_cv_lib_iconv=no fi if test "$am_func_iconv" = yes; then $as_echo "#define HAVE_ICONV 1" >>confdefs.h fi if test "$am_cv_lib_iconv" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5 $as_echo_n "checking how to link with libiconv... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5 $as_echo "$LIBICONV" >&6; } else CPPFLAGS="$am_save_CPPFLAGS" LIBICONV= LTLIBICONV= fi use_additional=yes acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" # Check whether --with-libintl-prefix was given. if test "${with_libintl_prefix+set}" = set; then : withval=$with_libintl_prefix; if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" else additional_includedir="$withval/include" additional_libdir="$withval/$acl_libdirstem" if test "$acl_libdirstem2" != "$acl_libdirstem" \ && ! test -d "$withval/$acl_libdirstem"; then additional_libdir="$withval/$acl_libdirstem2" fi fi fi fi LIBINTL= LTLIBINTL= INCINTL= LIBINTL_PREFIX= HAVE_LIBINTL= rpathdirs= ltrpathdirs= names_already_handled= names_next_round='intl ' while test -n "$names_next_round"; do names_this_round="$names_next_round" names_next_round= for name in $names_this_round; do already_handled= for n in $names_already_handled; do if test "$n" = "$name"; then already_handled=yes break fi done if test -z "$already_handled"; then names_already_handled="$names_already_handled $name" uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` eval value=\"\$HAVE_LIB$uppername\" if test -n "$value"; then if test "$value" = yes; then eval value=\"\$LIB$uppername\" test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value" eval value=\"\$LTLIB$uppername\" test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value" else : fi else found_dir= found_la= found_so= found_a= eval libname=\"$acl_libname_spec\" # typically: libname=lib$name if test -n "$acl_shlibext"; then shrext=".$acl_shlibext" # typically: shrext=.so else shrext= fi if test $use_additional = yes; then dir="$additional_libdir" if test -n "$acl_shlibext"; then if test -f "$dir/$libname$shrext"; then found_dir="$dir" found_so="$dir/$libname$shrext" else if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ver=`(cd "$dir" && \ for f in "$libname$shrext".*; do echo "$f"; done \ | sed -e "s,^$libname$shrext\\\\.,," \ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ | sed 1q ) 2>/dev/null` if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then found_dir="$dir" found_so="$dir/$libname$shrext.$ver" fi else eval library_names=\"$acl_library_names_spec\" for f in $library_names; do if test -f "$dir/$f"; then found_dir="$dir" found_so="$dir/$f" break fi done fi fi fi if test "X$found_dir" = "X"; then if test -f "$dir/$libname.$acl_libext"; then found_dir="$dir" found_a="$dir/$libname.$acl_libext" fi fi if test "X$found_dir" != "X"; then if test -f "$dir/$libname.la"; then found_la="$dir/$libname.la" fi fi fi if test "X$found_dir" = "X"; then for x in $LDFLAGS $LTLIBINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" case "$x" in -L*) dir=`echo "X$x" | sed -e 's/^X-L//'` if test -n "$acl_shlibext"; then if test -f "$dir/$libname$shrext"; then found_dir="$dir" found_so="$dir/$libname$shrext" else if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ver=`(cd "$dir" && \ for f in "$libname$shrext".*; do echo "$f"; done \ | sed -e "s,^$libname$shrext\\\\.,," \ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ | sed 1q ) 2>/dev/null` if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then found_dir="$dir" found_so="$dir/$libname$shrext.$ver" fi else eval library_names=\"$acl_library_names_spec\" for f in $library_names; do if test -f "$dir/$f"; then found_dir="$dir" found_so="$dir/$f" break fi done fi fi fi if test "X$found_dir" = "X"; then if test -f "$dir/$libname.$acl_libext"; then found_dir="$dir" found_a="$dir/$libname.$acl_libext" fi fi if test "X$found_dir" != "X"; then if test -f "$dir/$libname.la"; then found_la="$dir/$libname.la" fi fi ;; esac if test "X$found_dir" != "X"; then break fi done fi if test "X$found_dir" != "X"; then LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name" if test "X$found_so" != "X"; then if test "$enable_rpath" = no \ || test "X$found_dir" = "X/usr/$acl_libdirstem" \ || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" else haveit= for x in $ltrpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $found_dir" fi if test "$acl_hardcode_direct" = yes; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" else if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" haveit= for x in $rpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $found_dir" fi else haveit= for x in $LDFLAGS $LIBINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir" fi if test "$acl_hardcode_minus_L" != no; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" else LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" fi fi fi fi else if test "X$found_a" != "X"; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a" else LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name" fi fi additional_includedir= case "$found_dir" in */$acl_libdirstem | */$acl_libdirstem/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` if test "$name" = 'intl'; then LIBINTL_PREFIX="$basedir" fi additional_includedir="$basedir/include" ;; */$acl_libdirstem2 | */$acl_libdirstem2/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` if test "$name" = 'intl'; then LIBINTL_PREFIX="$basedir" fi additional_includedir="$basedir/include" ;; esac if test "X$additional_includedir" != "X"; then if test "X$additional_includedir" != "X/usr/include"; then haveit= if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then for x in $CPPFLAGS $INCINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_includedir"; then INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir" fi fi fi fi fi if test -n "$found_la"; then save_libdir="$libdir" case "$found_la" in */* | *\\*) . "$found_la" ;; *) . "./$found_la" ;; esac libdir="$save_libdir" for dep in $dependency_libs; do case "$dep" in -L*) additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then haveit= if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then haveit= for x in $LDFLAGS $LIBINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir" fi fi haveit= for x in $LDFLAGS $LTLIBINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir" fi fi fi fi ;; -R*) dir=`echo "X$dep" | sed -e 's/^X-R//'` if test "$enable_rpath" != no; then haveit= for x in $rpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $dir" fi haveit= for x in $ltrpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $dir" fi fi ;; -l*) names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ;; *.la) names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ;; *) LIBINTL="${LIBINTL}${LIBINTL:+ }$dep" LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep" ;; esac done fi else LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name" fi fi fi done done if test "X$rpathdirs" != "X"; then if test -n "$acl_hardcode_libdir_separator"; then alldirs= for found_dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" done acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" else for found_dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$found_dir" eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" done fi fi if test "X$ltrpathdirs" != "X"; then for found_dir in $ltrpathdirs; do LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir" done fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5 $as_echo_n "checking for GNU gettext in libintl... " >&6; } if eval \${$gt_func_gnugettext_libintl+:} false; then : $as_echo_n "(cached) " >&6 else gt_save_CPPFLAGS="$CPPFLAGS" CPPFLAGS="$CPPFLAGS $INCINTL" gt_save_LIBS="$LIBS" LIBS="$LIBS $LIBINTL" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #ifndef __GNU_GETTEXT_SUPPORTED_REVISION extern int _nl_msg_cat_cntr; extern #ifdef __cplusplus "C" #endif const char *_nl_expand_alias (const char *); #define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) #else #define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 #endif $gt_revision_test_code int main () { bindtextdomain ("", ""); return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$gt_func_gnugettext_libintl=yes" else eval "$gt_func_gnugettext_libintl=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then LIBS="$LIBS $LIBICONV" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #ifndef __GNU_GETTEXT_SUPPORTED_REVISION extern int _nl_msg_cat_cntr; extern #ifdef __cplusplus "C" #endif const char *_nl_expand_alias (const char *); #define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) #else #define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 #endif $gt_revision_test_code int main () { bindtextdomain ("", ""); return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : LIBINTL="$LIBINTL $LIBICONV" LTLIBINTL="$LTLIBINTL $LTLIBICONV" eval "$gt_func_gnugettext_libintl=yes" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi CPPFLAGS="$gt_save_CPPFLAGS" LIBS="$gt_save_LIBS" fi eval ac_res=\$$gt_func_gnugettext_libintl { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ && test "$PACKAGE" != gettext-runtime \ && test "$PACKAGE" != gettext-tools; }; then gt_use_preinstalled_gnugettext=yes else LIBINTL= LTLIBINTL= INCINTL= fi if test -n "$INTL_MACOSX_LIBS"; then if test "$gt_use_preinstalled_gnugettext" = "yes" \ || test "$nls_cv_use_gnu_gettext" = "yes"; then LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" fi fi if test "$gt_use_preinstalled_gnugettext" = "yes" \ || test "$nls_cv_use_gnu_gettext" = "yes"; then $as_echo "#define ENABLE_NLS 1" >>confdefs.h else USE_NLS=no fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5 $as_echo_n "checking whether to use NLS... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 $as_echo "$USE_NLS" >&6; } if test "$USE_NLS" = "yes"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5 $as_echo_n "checking where the gettext function comes from... " >&6; } if test "$gt_use_preinstalled_gnugettext" = "yes"; then if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then gt_source="external libintl" else gt_source="libc" fi else gt_source="included intl directory" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5 $as_echo "$gt_source" >&6; } fi if test "$USE_NLS" = "yes"; then if test "$gt_use_preinstalled_gnugettext" = "yes"; then if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5 $as_echo_n "checking how to link with libintl... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5 $as_echo "$LIBINTL" >&6; } for element in $INCINTL; do haveit= for x in $CPPFLAGS; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X$element"; then haveit=yes break fi done if test -z "$haveit"; then CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" fi done fi $as_echo "#define HAVE_GETTEXT 1" >>confdefs.h $as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h fi POSUB=po fi INTLLIBS="$LIBINTL" ac_config_files="$ac_config_files Makefile data/Makefile data/badges/Makefile po/Makefile.in src/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then if test "x$cache_file" != "x/dev/null"; then { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} if test ! -f "$cache_file" || test -h "$cache_file"; then cat confcache >"$cache_file" else case $cache_file in #( */* | ?:*) mv -f confcache "$cache_file"$$ && mv -f "$cache_file"$$ "$cache_file" ;; #( *) mv -f confcache "$cache_file" ;; esac fi fi else { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs { $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 $as_echo_n "checking that generated files are newer than configure... " >&6; } if test -n "$am_sleep_pid"; then # Hide warnings about reused PIDs. wait $am_sleep_pid 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 $as_echo "done" >&6; } if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then as_fn_error $? "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' else am__EXEEXT_TRUE='#' am__EXEEXT_FALSE= fi if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${HAVE_INTROSPECTION_TRUE}" && test -z "${HAVE_INTROSPECTION_FALSE}"; then as_fn_error $? "conditional \"HAVE_INTROSPECTION\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi : "${CONFIG_STATUS=./config.status}" ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by lightdm-gtk-greeter $as_me 2.0.5, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ lightdm-gtk-greeter config.status 2.0.5 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; --*=) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg= ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header as_fn_error $? "ambiguous option: \`$1' Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`' SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`' nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`' objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`' configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`' hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } # Quote evaled strings. for var in SHELL \ ECHO \ PATH_SEPARATOR \ SED \ GREP \ EGREP \ FGREP \ LD \ NM \ LN_S \ lt_SP2NL \ lt_NL2SP \ reload_flag \ OBJDUMP \ deplibs_check_method \ file_magic_cmd \ file_magic_glob \ want_nocaseglob \ DLLTOOL \ sharedlib_from_linklib_cmd \ AR \ AR_FLAGS \ archiver_list_spec \ STRIP \ RANLIB \ CC \ CFLAGS \ compiler \ lt_cv_sys_global_symbol_pipe \ lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_import \ lt_cv_sys_global_symbol_to_c_name_address \ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ lt_cv_nm_interface \ nm_file_list_spec \ lt_cv_truncate_bin \ lt_prog_compiler_no_builtin_flag \ lt_prog_compiler_pic \ lt_prog_compiler_wl \ lt_prog_compiler_static \ lt_cv_prog_compiler_c_o \ need_locks \ MANIFEST_TOOL \ DSYMUTIL \ NMEDIT \ LIPO \ OTOOL \ OTOOL64 \ shrext_cmds \ export_dynamic_flag_spec \ whole_archive_flag_spec \ compiler_needs_object \ with_gnu_ld \ allow_undefined_flag \ no_undefined_flag \ hardcode_libdir_flag_spec \ hardcode_libdir_separator \ exclude_expsyms \ include_expsyms \ file_list_spec \ variables_saved_for_relink \ libname_spec \ library_names_spec \ soname_spec \ install_override_mode \ finish_eval \ old_striplib \ striplib; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in reload_cmds \ old_postinstall_cmds \ old_postuninstall_cmds \ old_archive_cmds \ extract_expsyms_cmds \ old_archive_from_new_cmds \ old_archive_from_expsyms_cmds \ archive_cmds \ archive_expsym_cmds \ module_cmds \ module_expsym_cmds \ export_symbols_cmds \ prelink_cmds \ postlink_cmds \ postinstall_cmds \ postuninstall_cmds \ finish_cmds \ sys_lib_search_path_spec \ configure_time_dlsearch_path \ configure_time_lt_sys_library_path; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done ac_aux_dir='$ac_aux_dir' # See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi PACKAGE='$PACKAGE' VERSION='$VERSION' RM='$RM' ofile='$ofile' AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" # Capture the value of obsolete ALL_LINGUAS because we need it to compute # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it # from automake < 1.5. eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' # Capture the value of LINGUAS because we need it to compute CATALOGS. LINGUAS="${LINGUAS-%UNSET%}" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "data/Makefile") CONFIG_FILES="$CONFIG_FILES data/Makefile" ;; "data/badges/Makefile") CONFIG_FILES="$CONFIG_FILES data/badges/Makefile" ;; "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= ac_tmp= trap 'exit_status=$? : "${ac_tmp:=$tmp}" { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove sole $(srcdir), # ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ h s/// s/^/:/ s/[ ]*$/:/ s/:\$(srcdir):/:/g s/:\${srcdir}:/:/g s/:@srcdir@:/:/g s/^:*// s/:*$// x s/\(=[ ]*\).*/\1/ G s/\n// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$ac_tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_tt=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_tt"; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$ac_tmp/stdin" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ "$ac_tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$ac_tmp/stdin" case $ac_file in -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" } >"$ac_tmp/config.h" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$ac_tmp/config.h" "$ac_file" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ || as_fn_error $? "could not create -" "$LINENO" 5 fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "libtool":C) # See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi cfgfile=${ofile}T trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # Generated automatically by $as_me ($PACKAGE) $VERSION # NOTE: Changes made to this file will be lost: look at ltmain.sh. # Provide generalized library-building support services. # Written by Gordon Matzigkeit, 1996 # Copyright (C) 2014 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program or library that is built # using GNU Libtool, you may include this file under the same # distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # The names of the tagged configurations supported by this script. available_tags='' # Configured defaults for sys_lib_dlsearch_path munging. : \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} # ### BEGIN LIBTOOL CONFIG # Which release of libtool.m4 was used? macro_version=$macro_version macro_revision=$macro_revision # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # What type of objects to build. pic_mode=$pic_mode # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # Shared archive member basename,for filename based shared library versioning on AIX. shared_archive_member_spec=$shared_archive_member_spec # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # An echo program that protects backslashes. ECHO=$lt_ECHO # The PATH separator for the build system. PATH_SEPARATOR=$lt_PATH_SEPARATOR # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="\$SED -e 1s/^X//" # A grep program that handles long lines. GREP=$lt_GREP # An ERE matcher. EGREP=$lt_EGREP # A literal string matcher. FGREP=$lt_FGREP # A BSD- or MS-compatible name lister. NM=$lt_NM # Whether we need soft or hard links. LN_S=$lt_LN_S # What is the maximum length of a command? max_cmd_len=$max_cmd_len # Object file suffix (normally "o"). objext=$ac_objext # Executable file suffix (normally ""). exeext=$exeext # whether the shell understands "unset". lt_unset=$lt_unset # turn spaces into newlines. SP2NL=$lt_lt_SP2NL # turn newlines into spaces. NL2SP=$lt_lt_NL2SP # convert \$build file names to \$host format. to_host_file_cmd=$lt_cv_to_host_file_cmd # convert \$build files to toolchain format. to_tool_file_cmd=$lt_cv_to_tool_file_cmd # An object symbol dumper. OBJDUMP=$lt_OBJDUMP # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method = "file_magic". file_magic_cmd=$lt_file_magic_cmd # How to find potential files when deplibs_check_method = "file_magic". file_magic_glob=$lt_file_magic_glob # Find potential files using nocaseglob when deplibs_check_method = "file_magic". want_nocaseglob=$lt_want_nocaseglob # DLL creation program. DLLTOOL=$lt_DLLTOOL # Command to associate shared and link libraries. sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd # The archiver. AR=$lt_AR # Flags to create an archive. AR_FLAGS=$lt_AR_FLAGS # How to feed a file listing to the archiver. archiver_list_spec=$lt_archiver_list_spec # A symbol stripping program. STRIP=$lt_STRIP # Commands used to install an old-style archive. RANLIB=$lt_RANLIB old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Whether to use a lock for old archive extraction. lock_old_archive_extraction=$lock_old_archive_extraction # A C compiler. LTCC=$lt_CC # LTCC compiler flags. LTCFLAGS=$lt_CFLAGS # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration. global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm into a list of symbols to manually relocate. global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import # Transform the output of nm in a C name address pair. global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # Transform the output of nm in a C name address pair when lib prefix is needed. global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix # The name lister interface. nm_interface=$lt_lt_cv_nm_interface # Specify filename containing input files for \$NM. nm_file_list_spec=$lt_nm_file_list_spec # The root where to search for dependent libraries,and where our libraries should be installed. lt_sysroot=$lt_sysroot # Command to truncate a binary pipe. lt_truncate_bin=$lt_lt_cv_truncate_bin # The name of the directory that contains temporary libtool files. objdir=$objdir # Used to examine libraries when file_magic_cmd begins with "file". MAGIC_CMD=$MAGIC_CMD # Must we lock files when doing compilation? need_locks=$lt_need_locks # Manifest tool. MANIFEST_TOOL=$lt_MANIFEST_TOOL # Tool to manipulate archived DWARF debug symbol files on Mac OS X. DSYMUTIL=$lt_DSYMUTIL # Tool to change global to local symbols on Mac OS X. NMEDIT=$lt_NMEDIT # Tool to manipulate fat objects and archives on Mac OS X. LIPO=$lt_LIPO # ldd/readelf like tool for Mach-O binaries on Mac OS X. OTOOL=$lt_OTOOL # ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. OTOOL64=$lt_OTOOL64 # Old archive suffix (normally "a"). libext=$libext # Shared library suffix (normally ".so"). shrext_cmds=$lt_shrext_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Variables whose values should be saved in libtool wrapper scripts and # restored at link time. variables_saved_for_relink=$lt_variables_saved_for_relink # Do we need the "lib" prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Library versioning type. version_type=$version_type # Shared library runtime path variable. runpath_var=$runpath_var # Shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Permission mode override for installation of shared libraries. install_override_mode=$lt_install_override_mode # Command to use after installation of a shared archive. postinstall_cmds=$lt_postinstall_cmds # Command to use after uninstallation of a shared archive. postuninstall_cmds=$lt_postuninstall_cmds # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # As "finish_cmds", except a single script fragment to be evaled but # not shown. finish_eval=$lt_finish_eval # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Compile-time system search path for libraries. sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Detected run-time system search path for libraries. sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path # Explicit LT_SYS_LIBRARY_PATH set during ./configure time. configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # The linker used to build libraries. LD=$lt_LD # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds # A language specific compiler. CC=$lt_compiler # Is the compiler the GNU compiler? with_gcc=$GCC # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc # Whether or not to disallow shared libs when runtime libs are static. allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Whether the compiler copes with passing no objects directly. compiler_needs_object=$lt_compiler_needs_object # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds # Commands used to build a loadable module if different from building # a shared archive. module_cmds=$lt_module_cmds module_expsym_cmds=$lt_module_expsym_cmds # Whether we are building with GNU ld or not. with_gnu_ld=$lt_with_gnu_ld # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that enforces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct # Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary and the resulting library dependency is # "absolute",i.e impossible to change by setting \$shlibpath_var if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute # Set to "yes" if using the -LDIR flag during linking hardcodes DIR # into the resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR # into the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Set to "yes" if building a shared library automatically hardcodes DIR # into the library and all subsequent libraries and executables linked # against it. hardcode_automatic=$hardcode_automatic # Set to yes if linker adds runtime paths of dependent libraries # to runtime path list. inherit_rpath=$inherit_rpath # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds # Commands necessary for finishing linking programs. postlink_cmds=$lt_postlink_cmds # Specify filename containing input files. file_list_spec=$lt_file_list_spec # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # ### END LIBTOOL CONFIG _LT_EOF cat <<'_LT_EOF' >> "$cfgfile" # ### BEGIN FUNCTIONS SHARED WITH CONFIGURE # func_munge_path_list VARIABLE PATH # ----------------------------------- # VARIABLE is name of variable containing _space_ separated list of # directories to be munged by the contents of PATH, which is string # having a format: # "DIR[:DIR]:" # string "DIR[ DIR]" will be prepended to VARIABLE # ":DIR[:DIR]" # string "DIR[ DIR]" will be appended to VARIABLE # "DIRP[:DIRP]::[DIRA:]DIRA" # string "DIRP[ DIRP]" will be prepended to VARIABLE and string # "DIRA[ DIRA]" will be appended to VARIABLE # "DIR[:DIR]" # VARIABLE will be replaced by "DIR[ DIR]" func_munge_path_list () { case x$2 in x) ;; *:) eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" ;; x:*) eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" ;; *::*) eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" ;; *) eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" ;; esac } # Calculate cc_basename. Skip known compiler wrappers and cross-prefix. func_cc_basename () { for cc_temp in $*""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` } # ### END FUNCTIONS SHARED WITH CONFIGURE _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac ltmain=$ac_aux_dir/ltmain.sh # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ;; "depfiles":C) test x"$AMDEP_TRUE" != x"" || { # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir=$dirpart/$fdir; as_fn_mkdir_p # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ;; "po-directories":C) for ac_file in $CONFIG_FILES; do # Support "outfile[:infile[:infile...]]" case "$ac_file" in *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; esac # PO directories have a Makefile.in generated from Makefile.in.in. case "$ac_file" in */Makefile.in) # Adjust a relative srcdir. ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'` ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` # In autoconf-2.13 it is called $ac_given_srcdir. # In autoconf-2.50 it is called $srcdir. test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" case "$ac_given_srcdir" in .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; /*) top_srcdir="$ac_given_srcdir" ;; *) top_srcdir="$ac_dots$ac_given_srcdir" ;; esac # Treat a directory as a PO directory if and only if it has a # POTFILES.in file. This allows packages to have multiple PO # directories under different names or in different locations. if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then rm -f "$ac_dir/POTFILES" test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" gt_tab=`printf '\t'` cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" POMAKEFILEDEPS="POTFILES.in" # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend # on $ac_dir but don't depend on user-specified configuration # parameters. if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then # The LINGUAS file contains the set of available languages. if test -n "$OBSOLETE_ALL_LINGUAS"; then test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" fi ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` # Hide the ALL_LINGUAS assignment from automake < 1.5. eval 'ALL_LINGUAS''=$ALL_LINGUAS_' POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" else # The set of available languages was given in configure.in. # Hide the ALL_LINGUAS assignment from automake < 1.5. eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' fi # Compute POFILES # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) # Compute UPDATEPOFILES # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) # Compute DUMMYPOFILES # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) # Compute GMOFILES # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) case "$ac_given_srcdir" in .) srcdirpre= ;; *) srcdirpre='$(srcdir)/' ;; esac POFILES= UPDATEPOFILES= DUMMYPOFILES= GMOFILES= for lang in $ALL_LINGUAS; do POFILES="$POFILES $srcdirpre$lang.po" UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" DUMMYPOFILES="$DUMMYPOFILES $lang.nop" GMOFILES="$GMOFILES $srcdirpre$lang.gmo" done # CATALOGS depends on both $ac_dir and the user's LINGUAS # environment variable. INST_LINGUAS= if test -n "$ALL_LINGUAS"; then for presentlang in $ALL_LINGUAS; do useit=no if test "%UNSET%" != "$LINGUAS"; then desiredlanguages="$LINGUAS" else desiredlanguages="$ALL_LINGUAS" fi for desiredlang in $desiredlanguages; do # Use the presentlang catalog if desiredlang is # a. equal to presentlang, or # b. a variant of presentlang (because in this case, # presentlang can be used as a fallback for messages # which are not translated in the desiredlang catalog). case "$desiredlang" in "$presentlang"*) useit=yes;; esac done if test $useit = yes; then INST_LINGUAS="$INST_LINGUAS $presentlang" fi done fi CATALOGS= if test -n "$INST_LINGUAS"; then for lang in $INST_LINGUAS; do CATALOGS="$CATALOGS $lang.gmo" done fi test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do if test -f "$f"; then case "$f" in *.orig | *.bak | *~) ;; *) cat "$f" >> "$ac_dir/Makefile" ;; esac fi done fi ;; esac done ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi lightdm-gtk-greeter-2.0.5/ltmain.sh0000644000175000017500000117147413253544546021230 0ustar00bluesabrebluesabre00000000000000#! /bin/sh ## DO NOT EDIT - This file generated from ./build-aux/ltmain.in ## by inline-source v2014-01-03.01 # libtool (GNU libtool) 2.4.6 # Provide generalized library-building support services. # Written by Gordon Matzigkeit , 1996 # Copyright (C) 1996-2015 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . PROGRAM=libtool PACKAGE=libtool VERSION="2.4.6 Debian-2.4.6-2" package_revision=2.4.6 ## ------ ## ## Usage. ## ## ------ ## # Run './libtool --help' for help with using this script from the # command line. ## ------------------------------- ## ## User overridable command paths. ## ## ------------------------------- ## # After configure completes, it has a better idea of some of the # shell tools we need than the defaults used by the functions shared # with bootstrap, so set those here where they can still be over- # ridden by the user, but otherwise take precedence. : ${AUTOCONF="autoconf"} : ${AUTOMAKE="automake"} ## -------------------------- ## ## Source external libraries. ## ## -------------------------- ## # Much of our low-level functionality needs to be sourced from external # libraries, which are installed to $pkgauxdir. # Set a version string for this script. scriptversion=2015-01-20.17; # UTC # General shell script boiler plate, and helper functions. # Written by Gary V. Vaughan, 2004 # Copyright (C) 2004-2015 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # As a special exception to the GNU General Public License, if you distribute # this file as part of a program or library that is built using GNU Libtool, # you may include this file under the same distribution terms that you use # for the rest of that program. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # Please report bugs or propose patches to gary@gnu.org. ## ------ ## ## Usage. ## ## ------ ## # Evaluate this file near the top of your script to gain access to # the functions and variables defined here: # # . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh # # If you need to override any of the default environment variable # settings, do that before evaluating this file. ## -------------------- ## ## Shell normalisation. ## ## -------------------- ## # Some shells need a little help to be as Bourne compatible as possible. # Before doing anything else, make sure all that help has been provided! DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi # NLS nuisances: We save the old values in case they are required later. _G_user_locale= _G_safe_locale= for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test set = \"\${$_G_var+set}\"; then save_$_G_var=\$$_G_var $_G_var=C export $_G_var _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\" _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\" fi" done # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # Make sure IFS has a sensible default sp=' ' nl=' ' IFS="$sp $nl" # There are apparently some retarded systems that use ';' as a PATH separator! if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi ## ------------------------- ## ## Locate command utilities. ## ## ------------------------- ## # func_executable_p FILE # ---------------------- # Check that FILE is an executable regular file. func_executable_p () { test -f "$1" && test -x "$1" } # func_path_progs PROGS_LIST CHECK_FUNC [PATH] # -------------------------------------------- # Search for either a program that responds to --version with output # containing "GNU", or else returned by CHECK_FUNC otherwise, by # trying all the directories in PATH with each of the elements of # PROGS_LIST. # # CHECK_FUNC should accept the path to a candidate program, and # set $func_check_prog_result if it truncates its output less than # $_G_path_prog_max characters. func_path_progs () { _G_progs_list=$1 _G_check_func=$2 _G_PATH=${3-"$PATH"} _G_path_prog_max=0 _G_path_prog_found=false _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:} for _G_dir in $_G_PATH; do IFS=$_G_save_IFS test -z "$_G_dir" && _G_dir=. for _G_prog_name in $_G_progs_list; do for _exeext in '' .EXE; do _G_path_prog=$_G_dir/$_G_prog_name$_exeext func_executable_p "$_G_path_prog" || continue case `"$_G_path_prog" --version 2>&1` in *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;; *) $_G_check_func $_G_path_prog func_path_progs_result=$func_check_prog_result ;; esac $_G_path_prog_found && break 3 done done done IFS=$_G_save_IFS test -z "$func_path_progs_result" && { echo "no acceptable sed could be found in \$PATH" >&2 exit 1 } } # We want to be able to use the functions in this file before configure # has figured out where the best binaries are kept, which means we have # to search for them ourselves - except when the results are already set # where we skip the searches. # Unless the user overrides by setting SED, search the path for either GNU # sed, or the sed that truncates its output the least. test -z "$SED" && { _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ for _G_i in 1 2 3 4 5 6 7; do _G_sed_script=$_G_sed_script$nl$_G_sed_script done echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed _G_sed_script= func_check_prog_sed () { _G_path_prog=$1 _G_count=0 printf 0123456789 >conftest.in while : do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo '' >> conftest.nl "$_G_path_prog" -f conftest.sed conftest.out 2>/dev/null || break diff conftest.out conftest.nl >/dev/null 2>&1 || break _G_count=`expr $_G_count + 1` if test "$_G_count" -gt "$_G_path_prog_max"; then # Best one so far, save it but keep looking for a better one func_check_prog_result=$_G_path_prog _G_path_prog_max=$_G_count fi # 10*(2^10) chars as input seems more than enough test 10 -lt "$_G_count" && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out } func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin rm -f conftest.sed SED=$func_path_progs_result } # Unless the user overrides by setting GREP, search the path for either GNU # grep, or the grep that truncates its output the least. test -z "$GREP" && { func_check_prog_grep () { _G_path_prog=$1 _G_count=0 _G_path_prog_max=0 printf 0123456789 >conftest.in while : do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo 'GREP' >> conftest.nl "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' conftest.out 2>/dev/null || break diff conftest.out conftest.nl >/dev/null 2>&1 || break _G_count=`expr $_G_count + 1` if test "$_G_count" -gt "$_G_path_prog_max"; then # Best one so far, save it but keep looking for a better one func_check_prog_result=$_G_path_prog _G_path_prog_max=$_G_count fi # 10*(2^10) chars as input seems more than enough test 10 -lt "$_G_count" && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out } func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin GREP=$func_path_progs_result } ## ------------------------------- ## ## User overridable command paths. ## ## ------------------------------- ## # All uppercase variable names are used for environment variables. These # variables can be overridden by the user before calling a script that # uses them if a suitable command of that name is not already available # in the command search PATH. : ${CP="cp -f"} : ${ECHO="printf %s\n"} : ${EGREP="$GREP -E"} : ${FGREP="$GREP -F"} : ${LN_S="ln -s"} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} ## -------------------- ## ## Useful sed snippets. ## ## -------------------- ## sed_dirname='s|/[^/]*$||' sed_basename='s|^.*/||' # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. sed_quote_subst='s|\([`"$\\]\)|\\\1|g' # Same as above, but do not quote variable references. sed_double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution that turns a string into a regex matching for the # string literally. sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g' # Sed substitution that converts a w32 file name or path # that contains forward slashes, into one that contains # (escaped) backslashes. A very naive implementation. sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' # Re-'\' parameter expansions in output of sed_double_quote_subst that # were '\'-ed in input to the same. If an odd number of '\' preceded a # '$' in input to sed_double_quote_subst, that '$' was protected from # expansion. Since each input '\' is now two '\'s, look for any number # of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'. _G_bs='\\' _G_bs2='\\\\' _G_bs4='\\\\\\\\' _G_dollar='\$' sed_double_backslash="\ s/$_G_bs4/&\\ /g s/^$_G_bs2$_G_dollar/$_G_bs&/ s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g s/\n//g" ## ----------------- ## ## Global variables. ## ## ----------------- ## # Except for the global variables explicitly listed below, the following # functions in the '^func_' namespace, and the '^require_' namespace # variables initialised in the 'Resource management' section, sourcing # this file will not pollute your global namespace with anything # else. There's no portable way to scope variables in Bourne shell # though, so actually running these functions will sometimes place # results into a variable named after the function, and often use # temporary variables in the '^_G_' namespace. If you are careful to # avoid using those namespaces casually in your sourcing script, things # should continue to work as you expect. And, of course, you can freely # overwrite any of the functions or variables defined here before # calling anything to customize them. EXIT_SUCCESS=0 EXIT_FAILURE=1 EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. # Allow overriding, eg assuming that you follow the convention of # putting '$debug_cmd' at the start of all your functions, you can get # bash to show function call trace with: # # debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name debug_cmd=${debug_cmd-":"} exit_cmd=: # By convention, finish your script with: # # exit $exit_status # # so that you can set exit_status to non-zero if you want to indicate # something went wrong during execution without actually bailing out at # the point of failure. exit_status=$EXIT_SUCCESS # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of # the _XPG environment variable is not equal to 1 (one), the special # positional parameter $0, within a function call, is the name of the # function. progpath=$0 # The name of this program. progname=`$ECHO "$progpath" |$SED "$sed_basename"` # Make sure we have an absolute progpath for reexecution: case $progpath in [\\/]*|[A-Za-z]:\\*) ;; *[\\/]*) progdir=`$ECHO "$progpath" |$SED "$sed_dirname"` progdir=`cd "$progdir" && pwd` progpath=$progdir/$progname ;; *) _G_IFS=$IFS IFS=${PATH_SEPARATOR-:} for progdir in $PATH; do IFS=$_G_IFS test -x "$progdir/$progname" && break done IFS=$_G_IFS test -n "$progdir" || progdir=`pwd` progpath=$progdir/$progname ;; esac ## ----------------- ## ## Standard options. ## ## ----------------- ## # The following options affect the operation of the functions defined # below, and should be set appropriately depending on run-time para- # meters passed on the command line. opt_dry_run=false opt_quiet=false opt_verbose=false # Categories 'all' and 'none' are always available. Append any others # you will pass as the first argument to func_warning from your own # code. warning_categories= # By default, display warnings according to 'opt_warning_types'. Set # 'warning_func' to ':' to elide all warnings, or func_fatal_error to # treat the next displayed warning as a fatal error. warning_func=func_warn_and_continue # Set to 'all' to display all warnings, 'none' to suppress all # warnings, or a space delimited list of some subset of # 'warning_categories' to display only the listed warnings. opt_warning_types=all ## -------------------- ## ## Resource management. ## ## -------------------- ## # This section contains definitions for functions that each ensure a # particular resource (a file, or a non-empty configuration variable for # example) is available, and if appropriate to extract default values # from pertinent package files. Call them using their associated # 'require_*' variable to ensure that they are executed, at most, once. # # It's entirely deliberate that calling these functions can set # variables that don't obey the namespace limitations obeyed by the rest # of this file, in order that that they be as useful as possible to # callers. # require_term_colors # ------------------- # Allow display of bold text on terminals that support it. require_term_colors=func_require_term_colors func_require_term_colors () { $debug_cmd test -t 1 && { # COLORTERM and USE_ANSI_COLORS environment variables take # precedence, because most terminfo databases neglect to describe # whether color sequences are supported. test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"} if test 1 = "$USE_ANSI_COLORS"; then # Standard ANSI escape sequences tc_reset='' tc_bold=''; tc_standout='' tc_red=''; tc_green='' tc_blue=''; tc_cyan='' else # Otherwise trust the terminfo database after all. test -n "`tput sgr0 2>/dev/null`" && { tc_reset=`tput sgr0` test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold` tc_standout=$tc_bold test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso` test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1` test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2` test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4` test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5` } fi } require_term_colors=: } ## ----------------- ## ## Function library. ## ## ----------------- ## # This section contains a variety of useful functions to call in your # scripts. Take note of the portable wrappers for features provided by # some modern shells, which will fall back to slower equivalents on # less featureful shells. # func_append VAR VALUE # --------------------- # Append VALUE onto the existing contents of VAR. # We should try to minimise forks, especially on Windows where they are # unreasonably slow, so skip the feature probes when bash or zsh are # being used: if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then : ${_G_HAVE_ARITH_OP="yes"} : ${_G_HAVE_XSI_OPS="yes"} # The += operator was introduced in bash 3.1 case $BASH_VERSION in [12].* | 3.0 | 3.0*) ;; *) : ${_G_HAVE_PLUSEQ_OP="yes"} ;; esac fi # _G_HAVE_PLUSEQ_OP # Can be empty, in which case the shell is probed, "yes" if += is # useable or anything else if it does not work. test -z "$_G_HAVE_PLUSEQ_OP" \ && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \ && _G_HAVE_PLUSEQ_OP=yes if test yes = "$_G_HAVE_PLUSEQ_OP" then # This is an XSI compatible shell, allowing a faster implementation... eval 'func_append () { $debug_cmd eval "$1+=\$2" }' else # ...otherwise fall back to using expr, which is often a shell builtin. func_append () { $debug_cmd eval "$1=\$$1\$2" } fi # func_append_quoted VAR VALUE # ---------------------------- # Quote VALUE and append to the end of shell variable VAR, separated # by a space. if test yes = "$_G_HAVE_PLUSEQ_OP"; then eval 'func_append_quoted () { $debug_cmd func_quote_for_eval "$2" eval "$1+=\\ \$func_quote_for_eval_result" }' else func_append_quoted () { $debug_cmd func_quote_for_eval "$2" eval "$1=\$$1\\ \$func_quote_for_eval_result" } fi # func_append_uniq VAR VALUE # -------------------------- # Append unique VALUE onto the existing contents of VAR, assuming # entries are delimited by the first character of VALUE. For example: # # func_append_uniq options " --another-option option-argument" # # will only append to $options if " --another-option option-argument " # is not already present somewhere in $options already (note spaces at # each end implied by leading space in second argument). func_append_uniq () { $debug_cmd eval _G_current_value='`$ECHO $'$1'`' _G_delim=`expr "$2" : '\(.\)'` case $_G_delim$_G_current_value$_G_delim in *"$2$_G_delim"*) ;; *) func_append "$@" ;; esac } # func_arith TERM... # ------------------ # Set func_arith_result to the result of evaluating TERMs. test -z "$_G_HAVE_ARITH_OP" \ && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \ && _G_HAVE_ARITH_OP=yes if test yes = "$_G_HAVE_ARITH_OP"; then eval 'func_arith () { $debug_cmd func_arith_result=$(( $* )) }' else func_arith () { $debug_cmd func_arith_result=`expr "$@"` } fi # func_basename FILE # ------------------ # Set func_basename_result to FILE with everything up to and including # the last / stripped. if test yes = "$_G_HAVE_XSI_OPS"; then # If this shell supports suffix pattern removal, then use it to avoid # forking. Hide the definitions single quotes in case the shell chokes # on unsupported syntax... _b='func_basename_result=${1##*/}' _d='case $1 in */*) func_dirname_result=${1%/*}$2 ;; * ) func_dirname_result=$3 ;; esac' else # ...otherwise fall back to using sed. _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`' _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"` if test "X$func_dirname_result" = "X$1"; then func_dirname_result=$3 else func_append func_dirname_result "$2" fi' fi eval 'func_basename () { $debug_cmd '"$_b"' }' # func_dirname FILE APPEND NONDIR_REPLACEMENT # ------------------------------------------- # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. eval 'func_dirname () { $debug_cmd '"$_d"' }' # func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT # -------------------------------------------------------- # Perform func_basename and func_dirname in a single function # call: # dirname: Compute the dirname of FILE. If nonempty, # add APPEND to the result, otherwise set result # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. # value retuned in "$func_basename_result" # For efficiency, we do not delegate to the functions above but instead # duplicate the functionality here. eval 'func_dirname_and_basename () { $debug_cmd '"$_b"' '"$_d"' }' # func_echo ARG... # ---------------- # Echo program name prefixed message. func_echo () { $debug_cmd _G_message=$* func_echo_IFS=$IFS IFS=$nl for _G_line in $_G_message; do IFS=$func_echo_IFS $ECHO "$progname: $_G_line" done IFS=$func_echo_IFS } # func_echo_all ARG... # -------------------- # Invoke $ECHO with all args, space-separated. func_echo_all () { $ECHO "$*" } # func_echo_infix_1 INFIX ARG... # ------------------------------ # Echo program name, followed by INFIX on the first line, with any # additional lines not showing INFIX. func_echo_infix_1 () { $debug_cmd $require_term_colors _G_infix=$1; shift _G_indent=$_G_infix _G_prefix="$progname: $_G_infix: " _G_message=$* # Strip color escape sequences before counting printable length for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan" do test -n "$_G_tc" && { _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"` _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"` } done _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes func_echo_infix_1_IFS=$IFS IFS=$nl for _G_line in $_G_message; do IFS=$func_echo_infix_1_IFS $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2 _G_prefix=$_G_indent done IFS=$func_echo_infix_1_IFS } # func_error ARG... # ----------------- # Echo program name prefixed message to standard error. func_error () { $debug_cmd $require_term_colors func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2 } # func_fatal_error ARG... # ----------------------- # Echo program name prefixed message to standard error, and exit. func_fatal_error () { $debug_cmd func_error "$*" exit $EXIT_FAILURE } # func_grep EXPRESSION FILENAME # ----------------------------- # Check whether EXPRESSION matches any line of FILENAME, without output. func_grep () { $debug_cmd $GREP "$1" "$2" >/dev/null 2>&1 } # func_len STRING # --------------- # Set func_len_result to the length of STRING. STRING may not # start with a hyphen. test -z "$_G_HAVE_XSI_OPS" \ && (eval 'x=a/b/c; test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ && _G_HAVE_XSI_OPS=yes if test yes = "$_G_HAVE_XSI_OPS"; then eval 'func_len () { $debug_cmd func_len_result=${#1} }' else func_len () { $debug_cmd func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` } fi # func_mkdir_p DIRECTORY-PATH # --------------------------- # Make sure the entire path to DIRECTORY-PATH is available. func_mkdir_p () { $debug_cmd _G_directory_path=$1 _G_dir_list= if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then # Protect directory names starting with '-' case $_G_directory_path in -*) _G_directory_path=./$_G_directory_path ;; esac # While some portion of DIR does not yet exist... while test ! -d "$_G_directory_path"; do # ...make a list in topmost first order. Use a colon delimited # list incase some portion of path contains whitespace. _G_dir_list=$_G_directory_path:$_G_dir_list # If the last portion added has no slash in it, the list is done case $_G_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"` done _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'` func_mkdir_p_IFS=$IFS; IFS=: for _G_dir in $_G_dir_list; do IFS=$func_mkdir_p_IFS # mkdir can fail with a 'File exist' error if two processes # try to create one of the directories concurrently. Don't # stop in that case! $MKDIR "$_G_dir" 2>/dev/null || : done IFS=$func_mkdir_p_IFS # Bail out if we (or some other process) failed to create a directory. test -d "$_G_directory_path" || \ func_fatal_error "Failed to create '$1'" fi } # func_mktempdir [BASENAME] # ------------------------- # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If # given, BASENAME is the basename for that directory. func_mktempdir () { $debug_cmd _G_template=${TMPDIR-/tmp}/${1-$progname} if test : = "$opt_dry_run"; then # Return a directory name, but don't create it in dry-run mode _G_tmpdir=$_G_template-$$ else # If mktemp works, use that first and foremost _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null` if test ! -d "$_G_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race _G_tmpdir=$_G_template-${RANDOM-0}$$ func_mktempdir_umask=`umask` umask 0077 $MKDIR "$_G_tmpdir" umask $func_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure test -d "$_G_tmpdir" || \ func_fatal_error "cannot create temporary directory '$_G_tmpdir'" fi $ECHO "$_G_tmpdir" } # func_normal_abspath PATH # ------------------------ # Remove doubled-up and trailing slashes, "." path components, # and cancel out any ".." path components in PATH after making # it an absolute path. func_normal_abspath () { $debug_cmd # These SED scripts presuppose an absolute path with a trailing slash. _G_pathcar='s|^/\([^/]*\).*$|\1|' _G_pathcdr='s|^/[^/]*||' _G_removedotparts=':dotsl s|/\./|/|g t dotsl s|/\.$|/|' _G_collapseslashes='s|/\{1,\}|/|g' _G_finalslash='s|/*$|/|' # Start from root dir and reassemble the path. func_normal_abspath_result= func_normal_abspath_tpath=$1 func_normal_abspath_altnamespace= case $func_normal_abspath_tpath in "") # Empty path, that just means $cwd. func_stripname '' '/' "`pwd`" func_normal_abspath_result=$func_stripname_result return ;; # The next three entries are used to spot a run of precisely # two leading slashes without using negated character classes; # we take advantage of case's first-match behaviour. ///*) # Unusual form of absolute path, do nothing. ;; //*) # Not necessarily an ordinary path; POSIX reserves leading '//' # and for example Cygwin uses it to access remote file shares # over CIFS/SMB, so we conserve a leading double slash if found. func_normal_abspath_altnamespace=/ ;; /*) # Absolute path, do nothing. ;; *) # Relative path, prepend $cwd. func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath ;; esac # Cancel out all the simple stuff to save iterations. We also want # the path to end with a slash for ease of parsing, so make sure # there is one (and only one) here. func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"` while :; do # Processed it all yet? if test / = "$func_normal_abspath_tpath"; then # If we ascended to the root using ".." the result may be empty now. if test -z "$func_normal_abspath_result"; then func_normal_abspath_result=/ fi break fi func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$_G_pathcar"` func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -e "$_G_pathcdr"` # Figure out what to do with it case $func_normal_abspath_tcomponent in "") # Trailing empty path component, ignore it. ;; ..) # Parent dir; strip last assembled component from result. func_dirname "$func_normal_abspath_result" func_normal_abspath_result=$func_dirname_result ;; *) # Actual path component, append it. func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent" ;; esac done # Restore leading double-slash if one was found on entry. func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result } # func_notquiet ARG... # -------------------- # Echo program name prefixed message only when not in quiet mode. func_notquiet () { $debug_cmd $opt_quiet || func_echo ${1+"$@"} # A bug in bash halts the script if the last line of a function # fails when set -e is in force, so we need another command to # work around that: : } # func_relative_path SRCDIR DSTDIR # -------------------------------- # Set func_relative_path_result to the relative path from SRCDIR to DSTDIR. func_relative_path () { $debug_cmd func_relative_path_result= func_normal_abspath "$1" func_relative_path_tlibdir=$func_normal_abspath_result func_normal_abspath "$2" func_relative_path_tbindir=$func_normal_abspath_result # Ascend the tree starting from libdir while :; do # check if we have found a prefix of bindir case $func_relative_path_tbindir in $func_relative_path_tlibdir) # found an exact match func_relative_path_tcancelled= break ;; $func_relative_path_tlibdir*) # found a matching prefix func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" func_relative_path_tcancelled=$func_stripname_result if test -z "$func_relative_path_result"; then func_relative_path_result=. fi break ;; *) func_dirname $func_relative_path_tlibdir func_relative_path_tlibdir=$func_dirname_result if test -z "$func_relative_path_tlibdir"; then # Have to descend all the way to the root! func_relative_path_result=../$func_relative_path_result func_relative_path_tcancelled=$func_relative_path_tbindir break fi func_relative_path_result=../$func_relative_path_result ;; esac done # Now calculate path; take care to avoid doubling-up slashes. func_stripname '' '/' "$func_relative_path_result" func_relative_path_result=$func_stripname_result func_stripname '/' '/' "$func_relative_path_tcancelled" if test -n "$func_stripname_result"; then func_append func_relative_path_result "/$func_stripname_result" fi # Normalisation. If bindir is libdir, return '.' else relative path. if test -n "$func_relative_path_result"; then func_stripname './' '' "$func_relative_path_result" func_relative_path_result=$func_stripname_result fi test -n "$func_relative_path_result" || func_relative_path_result=. : } # func_quote_for_eval ARG... # -------------------------- # Aesthetically quote ARGs to be evaled later. # This function returns two values: # i) func_quote_for_eval_result # double-quoted, suitable for a subsequent eval # ii) func_quote_for_eval_unquoted_result # has all characters that are still active within double # quotes backslashified. func_quote_for_eval () { $debug_cmd func_quote_for_eval_unquoted_result= func_quote_for_eval_result= while test 0 -lt $#; do case $1 in *[\\\`\"\$]*) _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;; *) _G_unquoted_arg=$1 ;; esac if test -n "$func_quote_for_eval_unquoted_result"; then func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg" else func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg" fi case $_G_unquoted_arg in # Double-quote args containing shell metacharacters to delay # word splitting, command substitution and variable expansion # for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") _G_quoted_arg=\"$_G_unquoted_arg\" ;; *) _G_quoted_arg=$_G_unquoted_arg ;; esac if test -n "$func_quote_for_eval_result"; then func_append func_quote_for_eval_result " $_G_quoted_arg" else func_append func_quote_for_eval_result "$_G_quoted_arg" fi shift done } # func_quote_for_expand ARG # ------------------------- # Aesthetically quote ARG to be evaled later; same as above, # but do not quote variable references. func_quote_for_expand () { $debug_cmd case $1 in *[\\\`\"]*) _G_arg=`$ECHO "$1" | $SED \ -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;; *) _G_arg=$1 ;; esac case $_G_arg in # Double-quote args containing shell metacharacters to delay # word splitting and command substitution for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") _G_arg=\"$_G_arg\" ;; esac func_quote_for_expand_result=$_G_arg } # func_stripname PREFIX SUFFIX NAME # --------------------------------- # strip PREFIX and SUFFIX from NAME, and store in func_stripname_result. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). if test yes = "$_G_HAVE_XSI_OPS"; then eval 'func_stripname () { $debug_cmd # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are # positional parameters, so assign one to ordinary variable first. func_stripname_result=$3 func_stripname_result=${func_stripname_result#"$1"} func_stripname_result=${func_stripname_result%"$2"} }' else func_stripname () { $debug_cmd case $2 in .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;; *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;; esac } fi # func_show_eval CMD [FAIL_EXP] # ----------------------------- # Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. func_show_eval () { $debug_cmd _G_cmd=$1 _G_fail_exp=${2-':'} func_quote_for_expand "$_G_cmd" eval "func_notquiet $func_quote_for_expand_result" $opt_dry_run || { eval "$_G_cmd" _G_status=$? if test 0 -ne "$_G_status"; then eval "(exit $_G_status); $_G_fail_exp" fi } } # func_show_eval_locale CMD [FAIL_EXP] # ------------------------------------ # Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. Use the saved locale for evaluation. func_show_eval_locale () { $debug_cmd _G_cmd=$1 _G_fail_exp=${2-':'} $opt_quiet || { func_quote_for_expand "$_G_cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || { eval "$_G_user_locale $_G_cmd" _G_status=$? eval "$_G_safe_locale" if test 0 -ne "$_G_status"; then eval "(exit $_G_status); $_G_fail_exp" fi } } # func_tr_sh # ---------- # Turn $1 into a string suitable for a shell variable name. # Result is stored in $func_tr_sh_result. All characters # not in the set a-zA-Z0-9_ are replaced with '_'. Further, # if $1 begins with a digit, a '_' is prepended as well. func_tr_sh () { $debug_cmd case $1 in [0-9]* | *[!a-zA-Z0-9_]*) func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'` ;; * ) func_tr_sh_result=$1 ;; esac } # func_verbose ARG... # ------------------- # Echo program name prefixed message in verbose mode only. func_verbose () { $debug_cmd $opt_verbose && func_echo "$*" : } # func_warn_and_continue ARG... # ----------------------------- # Echo program name prefixed warning message to standard error. func_warn_and_continue () { $debug_cmd $require_term_colors func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2 } # func_warning CATEGORY ARG... # ---------------------------- # Echo program name prefixed warning message to standard error. Warning # messages can be filtered according to CATEGORY, where this function # elides messages where CATEGORY is not listed in the global variable # 'opt_warning_types'. func_warning () { $debug_cmd # CATEGORY must be in the warning_categories list! case " $warning_categories " in *" $1 "*) ;; *) func_internal_error "invalid warning category '$1'" ;; esac _G_category=$1 shift case " $opt_warning_types " in *" $_G_category "*) $warning_func ${1+"$@"} ;; esac } # func_sort_ver VER1 VER2 # ----------------------- # 'sort -V' is not generally available. # Note this deviates from the version comparison in automake # in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a # but this should suffice as we won't be specifying old # version formats or redundant trailing .0 in bootstrap.conf. # If we did want full compatibility then we should probably # use m4_version_compare from autoconf. func_sort_ver () { $debug_cmd printf '%s\n%s\n' "$1" "$2" \ | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n } # func_lt_ver PREV CURR # --------------------- # Return true if PREV and CURR are in the correct order according to # func_sort_ver, otherwise false. Use it like this: # # func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..." func_lt_ver () { $debug_cmd test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q` } # Local variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" # time-stamp-time-zone: "UTC" # End: #! /bin/sh # Set a version string for this script. scriptversion=2014-01-07.03; # UTC # A portable, pluggable option parser for Bourne shell. # Written by Gary V. Vaughan, 2010 # Copyright (C) 2010-2015 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # Please report bugs or propose patches to gary@gnu.org. ## ------ ## ## Usage. ## ## ------ ## # This file is a library for parsing options in your shell scripts along # with assorted other useful supporting features that you can make use # of too. # # For the simplest scripts you might need only: # # #!/bin/sh # . relative/path/to/funclib.sh # . relative/path/to/options-parser # scriptversion=1.0 # func_options ${1+"$@"} # eval set dummy "$func_options_result"; shift # ...rest of your script... # # In order for the '--version' option to work, you will need to have a # suitably formatted comment like the one at the top of this file # starting with '# Written by ' and ending with '# warranty; '. # # For '-h' and '--help' to work, you will also need a one line # description of your script's purpose in a comment directly above the # '# Written by ' line, like the one at the top of this file. # # The default options also support '--debug', which will turn on shell # execution tracing (see the comment above debug_cmd below for another # use), and '--verbose' and the func_verbose function to allow your script # to display verbose messages only when your user has specified # '--verbose'. # # After sourcing this file, you can plug processing for additional # options by amending the variables from the 'Configuration' section # below, and following the instructions in the 'Option parsing' # section further down. ## -------------- ## ## Configuration. ## ## -------------- ## # You should override these variables in your script after sourcing this # file so that they reflect the customisations you have added to the # option parser. # The usage line for option parsing errors and the start of '-h' and # '--help' output messages. You can embed shell variables for delayed # expansion at the time the message is displayed, but you will need to # quote other shell meta-characters carefully to prevent them being # expanded when the contents are evaled. usage='$progpath [OPTION]...' # Short help message in response to '-h' and '--help'. Add to this or # override it after sourcing this library to reflect the full set of # options your script accepts. usage_message="\ --debug enable verbose shell tracing -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all] -v, --verbose verbosely report processing --version print version information and exit -h, --help print short or long help message and exit " # Additional text appended to 'usage_message' in response to '--help'. long_help_message=" Warning categories include: 'all' show all warnings 'none' turn off all the warnings 'error' warnings are treated as fatal errors" # Help message printed before fatal option parsing errors. fatal_help="Try '\$progname --help' for more information." ## ------------------------- ## ## Hook function management. ## ## ------------------------- ## # This section contains functions for adding, removing, and running hooks # to the main code. A hook is just a named list of of function, that can # be run in order later on. # func_hookable FUNC_NAME # ----------------------- # Declare that FUNC_NAME will run hooks added with # 'func_add_hook FUNC_NAME ...'. func_hookable () { $debug_cmd func_append hookable_fns " $1" } # func_add_hook FUNC_NAME HOOK_FUNC # --------------------------------- # Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must # first have been declared "hookable" by a call to 'func_hookable'. func_add_hook () { $debug_cmd case " $hookable_fns " in *" $1 "*) ;; *) func_fatal_error "'$1' does not accept hook functions." ;; esac eval func_append ${1}_hooks '" $2"' } # func_remove_hook FUNC_NAME HOOK_FUNC # ------------------------------------ # Remove HOOK_FUNC from the list of functions called by FUNC_NAME. func_remove_hook () { $debug_cmd eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`' } # func_run_hooks FUNC_NAME [ARG]... # --------------------------------- # Run all hook functions registered to FUNC_NAME. # It is assumed that the list of hook functions contains nothing more # than a whitespace-delimited list of legal shell function names, and # no effort is wasted trying to catch shell meta-characters or preserve # whitespace. func_run_hooks () { $debug_cmd case " $hookable_fns " in *" $1 "*) ;; *) func_fatal_error "'$1' does not support hook funcions.n" ;; esac eval _G_hook_fns=\$$1_hooks; shift for _G_hook in $_G_hook_fns; do eval $_G_hook '"$@"' # store returned options list back into positional # parameters for next 'cmd' execution. eval _G_hook_result=\$${_G_hook}_result eval set dummy "$_G_hook_result"; shift done func_quote_for_eval ${1+"$@"} func_run_hooks_result=$func_quote_for_eval_result } ## --------------- ## ## Option parsing. ## ## --------------- ## # In order to add your own option parsing hooks, you must accept the # full positional parameter list in your hook function, remove any # options that you action, and then pass back the remaining unprocessed # options in '_result', escaped suitably for # 'eval'. Like this: # # my_options_prep () # { # $debug_cmd # # # Extend the existing usage message. # usage_message=$usage_message' # -s, --silent don'\''t print informational messages # ' # # func_quote_for_eval ${1+"$@"} # my_options_prep_result=$func_quote_for_eval_result # } # func_add_hook func_options_prep my_options_prep # # # my_silent_option () # { # $debug_cmd # # # Note that for efficiency, we parse as many options as we can # # recognise in a loop before passing the remainder back to the # # caller on the first unrecognised argument we encounter. # while test $# -gt 0; do # opt=$1; shift # case $opt in # --silent|-s) opt_silent=: ;; # # Separate non-argument short options: # -s*) func_split_short_opt "$_G_opt" # set dummy "$func_split_short_opt_name" \ # "-$func_split_short_opt_arg" ${1+"$@"} # shift # ;; # *) set dummy "$_G_opt" "$*"; shift; break ;; # esac # done # # func_quote_for_eval ${1+"$@"} # my_silent_option_result=$func_quote_for_eval_result # } # func_add_hook func_parse_options my_silent_option # # # my_option_validation () # { # $debug_cmd # # $opt_silent && $opt_verbose && func_fatal_help "\ # '--silent' and '--verbose' options are mutually exclusive." # # func_quote_for_eval ${1+"$@"} # my_option_validation_result=$func_quote_for_eval_result # } # func_add_hook func_validate_options my_option_validation # # You'll alse need to manually amend $usage_message to reflect the extra # options you parse. It's preferable to append if you can, so that # multiple option parsing hooks can be added safely. # func_options [ARG]... # --------------------- # All the functions called inside func_options are hookable. See the # individual implementations for details. func_hookable func_options func_options () { $debug_cmd func_options_prep ${1+"$@"} eval func_parse_options \ ${func_options_prep_result+"$func_options_prep_result"} eval func_validate_options \ ${func_parse_options_result+"$func_parse_options_result"} eval func_run_hooks func_options \ ${func_validate_options_result+"$func_validate_options_result"} # save modified positional parameters for caller func_options_result=$func_run_hooks_result } # func_options_prep [ARG]... # -------------------------- # All initialisations required before starting the option parse loop. # Note that when calling hook functions, we pass through the list of # positional parameters. If a hook function modifies that list, and # needs to propogate that back to rest of this script, then the complete # modified list must be put in 'func_run_hooks_result' before # returning. func_hookable func_options_prep func_options_prep () { $debug_cmd # Option defaults: opt_verbose=false opt_warning_types= func_run_hooks func_options_prep ${1+"$@"} # save modified positional parameters for caller func_options_prep_result=$func_run_hooks_result } # func_parse_options [ARG]... # --------------------------- # The main option parsing loop. func_hookable func_parse_options func_parse_options () { $debug_cmd func_parse_options_result= # this just eases exit handling while test $# -gt 0; do # Defer to hook functions for initial option parsing, so they # get priority in the event of reusing an option name. func_run_hooks func_parse_options ${1+"$@"} # Adjust func_parse_options positional parameters to match eval set dummy "$func_run_hooks_result"; shift # Break out of the loop if we already parsed every option. test $# -gt 0 || break _G_opt=$1 shift case $_G_opt in --debug|-x) debug_cmd='set -x' func_echo "enabling shell trace mode" $debug_cmd ;; --no-warnings|--no-warning|--no-warn) set dummy --warnings none ${1+"$@"} shift ;; --warnings|--warning|-W) test $# = 0 && func_missing_arg $_G_opt && break case " $warning_categories $1" in *" $1 "*) # trailing space prevents matching last $1 above func_append_uniq opt_warning_types " $1" ;; *all) opt_warning_types=$warning_categories ;; *none) opt_warning_types=none warning_func=: ;; *error) opt_warning_types=$warning_categories warning_func=func_fatal_error ;; *) func_fatal_error \ "unsupported warning category: '$1'" ;; esac shift ;; --verbose|-v) opt_verbose=: ;; --version) func_version ;; -\?|-h) func_usage ;; --help) func_help ;; # Separate optargs to long options (plugins may need this): --*=*) func_split_equals "$_G_opt" set dummy "$func_split_equals_lhs" \ "$func_split_equals_rhs" ${1+"$@"} shift ;; # Separate optargs to short options: -W*) func_split_short_opt "$_G_opt" set dummy "$func_split_short_opt_name" \ "$func_split_short_opt_arg" ${1+"$@"} shift ;; # Separate non-argument short options: -\?*|-h*|-v*|-x*) func_split_short_opt "$_G_opt" set dummy "$func_split_short_opt_name" \ "-$func_split_short_opt_arg" ${1+"$@"} shift ;; --) break ;; -*) func_fatal_help "unrecognised option: '$_G_opt'" ;; *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; esac done # save modified positional parameters for caller func_quote_for_eval ${1+"$@"} func_parse_options_result=$func_quote_for_eval_result } # func_validate_options [ARG]... # ------------------------------ # Perform any sanity checks on option settings and/or unconsumed # arguments. func_hookable func_validate_options func_validate_options () { $debug_cmd # Display all warnings if -W was not given. test -n "$opt_warning_types" || opt_warning_types=" $warning_categories" func_run_hooks func_validate_options ${1+"$@"} # Bail if the options were screwed! $exit_cmd $EXIT_FAILURE # save modified positional parameters for caller func_validate_options_result=$func_run_hooks_result } ## ----------------- ## ## Helper functions. ## ## ----------------- ## # This section contains the helper functions used by the rest of the # hookable option parser framework in ascii-betical order. # func_fatal_help ARG... # ---------------------- # Echo program name prefixed message to standard error, followed by # a help hint, and exit. func_fatal_help () { $debug_cmd eval \$ECHO \""Usage: $usage"\" eval \$ECHO \""$fatal_help"\" func_error ${1+"$@"} exit $EXIT_FAILURE } # func_help # --------- # Echo long help message to standard output and exit. func_help () { $debug_cmd func_usage_message $ECHO "$long_help_message" exit 0 } # func_missing_arg ARGNAME # ------------------------ # Echo program name prefixed message to standard error and set global # exit_cmd. func_missing_arg () { $debug_cmd func_error "Missing argument for '$1'." exit_cmd=exit } # func_split_equals STRING # ------------------------ # Set func_split_equals_lhs and func_split_equals_rhs shell variables after # splitting STRING at the '=' sign. test -z "$_G_HAVE_XSI_OPS" \ && (eval 'x=a/b/c; test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ && _G_HAVE_XSI_OPS=yes if test yes = "$_G_HAVE_XSI_OPS" then # This is an XSI compatible shell, allowing a faster implementation... eval 'func_split_equals () { $debug_cmd func_split_equals_lhs=${1%%=*} func_split_equals_rhs=${1#*=} test "x$func_split_equals_lhs" = "x$1" \ && func_split_equals_rhs= }' else # ...otherwise fall back to using expr, which is often a shell builtin. func_split_equals () { $debug_cmd func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'` func_split_equals_rhs= test "x$func_split_equals_lhs" = "x$1" \ || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'` } fi #func_split_equals # func_split_short_opt SHORTOPT # ----------------------------- # Set func_split_short_opt_name and func_split_short_opt_arg shell # variables after splitting SHORTOPT after the 2nd character. if test yes = "$_G_HAVE_XSI_OPS" then # This is an XSI compatible shell, allowing a faster implementation... eval 'func_split_short_opt () { $debug_cmd func_split_short_opt_arg=${1#??} func_split_short_opt_name=${1%"$func_split_short_opt_arg"} }' else # ...otherwise fall back to using expr, which is often a shell builtin. func_split_short_opt () { $debug_cmd func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'` func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'` } fi #func_split_short_opt # func_usage # ---------- # Echo short help message to standard output and exit. func_usage () { $debug_cmd func_usage_message $ECHO "Run '$progname --help |${PAGER-more}' for full usage" exit 0 } # func_usage_message # ------------------ # Echo short help message to standard output. func_usage_message () { $debug_cmd eval \$ECHO \""Usage: $usage"\" echo $SED -n 's|^# || /^Written by/{ x;p;x } h /^Written by/q' < "$progpath" echo eval \$ECHO \""$usage_message"\" } # func_version # ------------ # Echo version message to standard output and exit. func_version () { $debug_cmd printf '%s\n' "$progname $scriptversion" $SED -n ' /(C)/!b go :more /\./!{ N s|\n# | | b more } :go /^# Written by /,/# warranty; / { s|^# || s|^# *$|| s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2| p } /^# Written by / { s|^# || p } /^warranty; /q' < "$progpath" exit $? } # Local variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" # time-stamp-time-zone: "UTC" # End: # Set a version string. scriptversion='(GNU libtool) 2.4.6' # func_echo ARG... # ---------------- # Libtool also displays the current mode in messages, so override # funclib.sh func_echo with this custom definition. func_echo () { $debug_cmd _G_message=$* func_echo_IFS=$IFS IFS=$nl for _G_line in $_G_message; do IFS=$func_echo_IFS $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line" done IFS=$func_echo_IFS } # func_warning ARG... # ------------------- # Libtool warnings are not categorized, so override funclib.sh # func_warning with this simpler definition. func_warning () { $debug_cmd $warning_func ${1+"$@"} } ## ---------------- ## ## Options parsing. ## ## ---------------- ## # Hook in the functions to make sure our own options are parsed during # the option parsing loop. usage='$progpath [OPTION]... [MODE-ARG]...' # Short help message in response to '-h'. usage_message="Options: --config show all configuration variables --debug enable verbose shell tracing -n, --dry-run display commands without modifying any files --features display basic configuration information and exit --mode=MODE use operation mode MODE --no-warnings equivalent to '-Wnone' --preserve-dup-deps don't remove duplicate dependency libraries --quiet, --silent don't print informational messages --tag=TAG use configuration variables from tag TAG -v, --verbose print more informational messages than default --version print version information -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all] -h, --help, --help-all print short, long, or detailed help message " # Additional text appended to 'usage_message' in response to '--help'. func_help () { $debug_cmd func_usage_message $ECHO "$long_help_message MODE must be one of the following: clean remove files from the build directory compile compile a source file into a libtool object execute automatically set library path, then run a program finish complete the installation of libtool libraries install install libraries or executables link create a library or an executable uninstall remove libraries from an installed directory MODE-ARGS vary depending on the MODE. When passed as first option, '--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that. Try '$progname --help --mode=MODE' for a more detailed description of MODE. When reporting a bug, please describe a test case to reproduce it and include the following information: host-triplet: $host shell: $SHELL compiler: $LTCC compiler flags: $LTCFLAGS linker: $LD (gnu? $with_gnu_ld) version: $progname $scriptversion Debian-2.4.6-2 automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q` autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q` Report bugs to . GNU libtool home page: . General help using GNU software: ." exit 0 } # func_lo2o OBJECT-NAME # --------------------- # Transform OBJECT-NAME from a '.lo' suffix to the platform specific # object suffix. lo2o=s/\\.lo\$/.$objext/ o2lo=s/\\.$objext\$/.lo/ if test yes = "$_G_HAVE_XSI_OPS"; then eval 'func_lo2o () { case $1 in *.lo) func_lo2o_result=${1%.lo}.$objext ;; * ) func_lo2o_result=$1 ;; esac }' # func_xform LIBOBJ-OR-SOURCE # --------------------------- # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise) # suffix to a '.lo' libtool-object suffix. eval 'func_xform () { func_xform_result=${1%.*}.lo }' else # ...otherwise fall back to using sed. func_lo2o () { func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"` } func_xform () { func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'` } fi # func_fatal_configuration ARG... # ------------------------------- # Echo program name prefixed message to standard error, followed by # a configuration failure hint, and exit. func_fatal_configuration () { func__fatal_error ${1+"$@"} \ "See the $PACKAGE documentation for more information." \ "Fatal configuration error." } # func_config # ----------- # Display the configuration for all the tags in this script. func_config () { re_begincf='^# ### BEGIN LIBTOOL' re_endcf='^# ### END LIBTOOL' # Default configuration. $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" # Now print the configurations for the tags. for tagname in $taglist; do $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" done exit $? } # func_features # ------------- # Display the features supported by this script. func_features () { echo "host: $host" if test yes = "$build_libtool_libs"; then echo "enable shared libraries" else echo "disable shared libraries" fi if test yes = "$build_old_libs"; then echo "enable static libraries" else echo "disable static libraries" fi exit $? } # func_enable_tag TAGNAME # ----------------------- # Verify that TAGNAME is valid, and either flag an error and exit, or # enable the TAGNAME tag. We also add TAGNAME to the global $taglist # variable here. func_enable_tag () { # Global variable: tagname=$1 re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" sed_extractcf=/$re_begincf/,/$re_endcf/p # Validate tagname. case $tagname in *[!-_A-Za-z0-9,/]*) func_fatal_error "invalid tag name: $tagname" ;; esac # Don't test for the "default" C tag, as we know it's # there but not specially marked. case $tagname in CC) ;; *) if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then taglist="$taglist $tagname" # Evaluate the configuration. Be careful to quote the path # and the sed script, to avoid splitting on whitespace, but # also don't use non-portable quotes within backquotes within # quotes we have to do it in 2 steps: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` eval "$extractedcf" else func_error "ignoring unknown tag $tagname" fi ;; esac } # func_check_version_match # ------------------------ # Ensure that we are using m4 macros, and libtool script from the same # release of libtool. func_check_version_match () { if test "$package_revision" != "$macro_revision"; then if test "$VERSION" != "$macro_version"; then if test -z "$macro_version"; then cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from an older release. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from $PACKAGE $macro_version. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF fi else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, $progname: but the definition of this LT_INIT comes from revision $macro_revision. $progname: You should recreate aclocal.m4 with macros from revision $package_revision $progname: of $PACKAGE $VERSION and run autoconf again. _LT_EOF fi exit $EXIT_MISMATCH fi } # libtool_options_prep [ARG]... # ----------------------------- # Preparation for options parsed by libtool. libtool_options_prep () { $debug_mode # Option defaults: opt_config=false opt_dlopen= opt_dry_run=false opt_help=false opt_mode= opt_preserve_dup_deps=false opt_quiet=false nonopt= preserve_args= # Shorthand for --mode=foo, only valid as the first argument case $1 in clean|clea|cle|cl) shift; set dummy --mode clean ${1+"$@"}; shift ;; compile|compil|compi|comp|com|co|c) shift; set dummy --mode compile ${1+"$@"}; shift ;; execute|execut|execu|exec|exe|ex|e) shift; set dummy --mode execute ${1+"$@"}; shift ;; finish|finis|fini|fin|fi|f) shift; set dummy --mode finish ${1+"$@"}; shift ;; install|instal|insta|inst|ins|in|i) shift; set dummy --mode install ${1+"$@"}; shift ;; link|lin|li|l) shift; set dummy --mode link ${1+"$@"}; shift ;; uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) shift; set dummy --mode uninstall ${1+"$@"}; shift ;; esac # Pass back the list of options. func_quote_for_eval ${1+"$@"} libtool_options_prep_result=$func_quote_for_eval_result } func_add_hook func_options_prep libtool_options_prep # libtool_parse_options [ARG]... # --------------------------------- # Provide handling for libtool specific options. libtool_parse_options () { $debug_cmd # Perform our own loop to consume as many options as possible in # each iteration. while test $# -gt 0; do _G_opt=$1 shift case $_G_opt in --dry-run|--dryrun|-n) opt_dry_run=: ;; --config) func_config ;; --dlopen|-dlopen) opt_dlopen="${opt_dlopen+$opt_dlopen }$1" shift ;; --preserve-dup-deps) opt_preserve_dup_deps=: ;; --features) func_features ;; --finish) set dummy --mode finish ${1+"$@"}; shift ;; --help) opt_help=: ;; --help-all) opt_help=': help-all' ;; --mode) test $# = 0 && func_missing_arg $_G_opt && break opt_mode=$1 case $1 in # Valid mode arguments: clean|compile|execute|finish|install|link|relink|uninstall) ;; # Catch anything else as an error *) func_error "invalid argument for $_G_opt" exit_cmd=exit break ;; esac shift ;; --no-silent|--no-quiet) opt_quiet=false func_append preserve_args " $_G_opt" ;; --no-warnings|--no-warning|--no-warn) opt_warning=false func_append preserve_args " $_G_opt" ;; --no-verbose) opt_verbose=false func_append preserve_args " $_G_opt" ;; --silent|--quiet) opt_quiet=: opt_verbose=false func_append preserve_args " $_G_opt" ;; --tag) test $# = 0 && func_missing_arg $_G_opt && break opt_tag=$1 func_append preserve_args " $_G_opt $1" func_enable_tag "$1" shift ;; --verbose|-v) opt_quiet=false opt_verbose=: func_append preserve_args " $_G_opt" ;; # An option not handled by this hook function: *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; esac done # save modified positional parameters for caller func_quote_for_eval ${1+"$@"} libtool_parse_options_result=$func_quote_for_eval_result } func_add_hook func_parse_options libtool_parse_options # libtool_validate_options [ARG]... # --------------------------------- # Perform any sanity checks on option settings and/or unconsumed # arguments. libtool_validate_options () { # save first non-option argument if test 0 -lt $#; then nonopt=$1 shift fi # preserve --debug test : = "$debug_cmd" || func_append preserve_args " --debug" case $host in # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452 # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788 *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*) # don't eliminate duplications in $postdeps and $predeps opt_duplicate_compiler_generated_deps=: ;; *) opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps ;; esac $opt_help || { # Sanity checks first: func_check_version_match test yes != "$build_libtool_libs" \ && test yes != "$build_old_libs" \ && func_fatal_configuration "not configured to build any kind of library" # Darwin sucks eval std_shrext=\"$shrext_cmds\" # Only execute mode is allowed to have -dlopen flags. if test -n "$opt_dlopen" && test execute != "$opt_mode"; then func_error "unrecognized option '-dlopen'" $ECHO "$help" 1>&2 exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help=$help help="Try '$progname --help --mode=$opt_mode' for more information." } # Pass back the unparsed argument list func_quote_for_eval ${1+"$@"} libtool_validate_options_result=$func_quote_for_eval_result } func_add_hook func_validate_options libtool_validate_options # Process options as early as possible so that --help and --version # can return quickly. func_options ${1+"$@"} eval set dummy "$func_options_result"; shift ## ----------- ## ## Main. ## ## ----------- ## magic='%%%MAGIC variable%%%' magic_exe='%%%MAGIC EXE variable%%%' # Global variables. extracted_archives= extracted_serial=0 # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. exec_cmd= # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF $1 _LTECHO_EOF' } # func_generated_by_libtool # True iff stdin has been generated by Libtool. This function is only # a basic sanity check; it will hardly flush out determined imposters. func_generated_by_libtool_p () { $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 } # func_lalib_p file # True iff FILE is a libtool '.la' library or '.lo' object file. # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_lalib_p () { test -f "$1" && $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p } # func_lalib_unsafe_p file # True iff FILE is a libtool '.la' library or '.lo' object file. # This function implements the same check as func_lalib_p without # resorting to external programs. To this end, it redirects stdin and # closes it afterwards, without saving the original file descriptor. # As a safety measure, use it only where a negative result would be # fatal anyway. Works if 'file' does not exist. func_lalib_unsafe_p () { lalib_p=no if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then for lalib_p_l in 1 2 3 4 do read lalib_p_line case $lalib_p_line in \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; esac done exec 0<&5 5<&- fi test yes = "$lalib_p" } # func_ltwrapper_script_p file # True iff FILE is a libtool wrapper script # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_script_p () { test -f "$1" && $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p } # func_ltwrapper_executable_p file # True iff FILE is a libtool wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_executable_p () { func_ltwrapper_exec_suffix= case $1 in *.exe) ;; *) func_ltwrapper_exec_suffix=.exe ;; esac $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 } # func_ltwrapper_scriptname file # Assumes file is an ltwrapper_executable # uses $file to determine the appropriate filename for a # temporary ltwrapper_script. func_ltwrapper_scriptname () { func_dirname_and_basename "$1" "" "." func_stripname '' '.exe' "$func_basename_result" func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper } # func_ltwrapper_p file # True iff FILE is a libtool wrapper script or wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_p () { func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" } # func_execute_cmds commands fail_cmd # Execute tilde-delimited COMMANDS. # If FAIL_CMD is given, eval that upon failure. # FAIL_CMD may read-access the current command in variable CMD! func_execute_cmds () { $debug_cmd save_ifs=$IFS; IFS='~' for cmd in $1; do IFS=$sp$nl eval cmd=\"$cmd\" IFS=$save_ifs func_show_eval "$cmd" "${2-:}" done IFS=$save_ifs } # func_source file # Source FILE, adding directory component if necessary. # Note that it is not necessary on cygwin/mingw to append a dot to # FILE even if both FILE and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # 'FILE.' does not work on cygwin managed mounts. func_source () { $debug_cmd case $1 in */* | *\\*) . "$1" ;; *) . "./$1" ;; esac } # func_resolve_sysroot PATH # Replace a leading = in PATH with a sysroot. Store the result into # func_resolve_sysroot_result func_resolve_sysroot () { func_resolve_sysroot_result=$1 case $func_resolve_sysroot_result in =*) func_stripname '=' '' "$func_resolve_sysroot_result" func_resolve_sysroot_result=$lt_sysroot$func_stripname_result ;; esac } # func_replace_sysroot PATH # If PATH begins with the sysroot, replace it with = and # store the result into func_replace_sysroot_result. func_replace_sysroot () { case $lt_sysroot:$1 in ?*:"$lt_sysroot"*) func_stripname "$lt_sysroot" '' "$1" func_replace_sysroot_result='='$func_stripname_result ;; *) # Including no sysroot. func_replace_sysroot_result=$1 ;; esac } # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. # Only attempt this if the compiler in the base compile # command doesn't match the default compiler. # arg is usually of the form 'gcc ...' func_infer_tag () { $debug_cmd if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) for z in $available_tags; do if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. func_append_quoted CC_quoted "$arg" done CC_expanded=`func_echo_all $CC` CC_quoted_expanded=`func_echo_all $CC_quoted` case "$@ " in " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. tagname=$z break ;; esac fi done # If $tagname still isn't set, then no tagged configuration # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then func_echo "unable to infer tagged configuration" func_fatal_error "specify a tag with '--tag'" # else # func_verbose "using $tagname tagged configuration" fi ;; esac fi } # func_write_libtool_object output_name pic_name nonpic_name # Create a libtool object file (analogous to a ".la" file), # but don't create it if we're doing a dry run. func_write_libtool_object () { write_libobj=$1 if test yes = "$build_libtool_libs"; then write_lobj=\'$2\' else write_lobj=none fi if test yes = "$build_old_libs"; then write_oldobj=\'$3\' else write_oldobj=none fi $opt_dry_run || { cat >${write_libobj}T </dev/null` if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | $SED -e "$sed_naive_backslashify"` else func_convert_core_file_wine_to_w32_result= fi fi } # end: func_convert_core_file_wine_to_w32 # func_convert_core_path_wine_to_w32 ARG # Helper function used by path conversion functions when $build is *nix, and # $host is mingw, cygwin, or some other w32 environment. Relies on a correctly # configured wine environment available, with the winepath program in $build's # $PATH. Assumes ARG has no leading or trailing path separator characters. # # ARG is path to be converted from $build format to win32. # Result is available in $func_convert_core_path_wine_to_w32_result. # Unconvertible file (directory) names in ARG are skipped; if no directory names # are convertible, then the result may be empty. func_convert_core_path_wine_to_w32 () { $debug_cmd # unfortunately, winepath doesn't convert paths, only file names func_convert_core_path_wine_to_w32_result= if test -n "$1"; then oldIFS=$IFS IFS=: for func_convert_core_path_wine_to_w32_f in $1; do IFS=$oldIFS func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" if test -n "$func_convert_core_file_wine_to_w32_result"; then if test -z "$func_convert_core_path_wine_to_w32_result"; then func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result else func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" fi fi done IFS=$oldIFS fi } # end: func_convert_core_path_wine_to_w32 # func_cygpath ARGS... # Wrapper around calling the cygpath program via LT_CYGPATH. This is used when # when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) # $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or # (2), returns the Cygwin file name or path in func_cygpath_result (input # file name or path is assumed to be in w32 format, as previously converted # from $build's *nix or MSYS format). In case (3), returns the w32 file name # or path in func_cygpath_result (input file name or path is assumed to be in # Cygwin format). Returns an empty string on error. # # ARGS are passed to cygpath, with the last one being the file name or path to # be converted. # # Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH # environment variable; do not put it in $PATH. func_cygpath () { $debug_cmd if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` if test "$?" -ne 0; then # on failure, ensure result is empty func_cygpath_result= fi else func_cygpath_result= func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'" fi } #end: func_cygpath # func_convert_core_msys_to_w32 ARG # Convert file name or path ARG from MSYS format to w32 format. Return # result in func_convert_core_msys_to_w32_result. func_convert_core_msys_to_w32 () { $debug_cmd # awkward: cmd appends spaces to result func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"` } #end: func_convert_core_msys_to_w32 # func_convert_file_check ARG1 ARG2 # Verify that ARG1 (a file name in $build format) was converted to $host # format in ARG2. Otherwise, emit an error message, but continue (resetting # func_to_host_file_result to ARG1). func_convert_file_check () { $debug_cmd if test -z "$2" && test -n "$1"; then func_error "Could not determine host file name corresponding to" func_error " '$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback: func_to_host_file_result=$1 fi } # end func_convert_file_check # func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH # Verify that FROM_PATH (a path in $build format) was converted to $host # format in TO_PATH. Otherwise, emit an error message, but continue, resetting # func_to_host_file_result to a simplistic fallback value (see below). func_convert_path_check () { $debug_cmd if test -z "$4" && test -n "$3"; then func_error "Could not determine the host path corresponding to" func_error " '$3'" func_error "Continuing, but uninstalled executables may not work." # Fallback. This is a deliberately simplistic "conversion" and # should not be "improved". See libtool.info. if test "x$1" != "x$2"; then lt_replace_pathsep_chars="s|$1|$2|g" func_to_host_path_result=`echo "$3" | $SED -e "$lt_replace_pathsep_chars"` else func_to_host_path_result=$3 fi fi } # end func_convert_path_check # func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG # Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT # and appending REPL if ORIG matches BACKPAT. func_convert_path_front_back_pathsep () { $debug_cmd case $4 in $1 ) func_to_host_path_result=$3$func_to_host_path_result ;; esac case $4 in $2 ) func_append func_to_host_path_result "$3" ;; esac } # end func_convert_path_front_back_pathsep ################################################## # $build to $host FILE NAME CONVERSION FUNCTIONS # ################################################## # invoked via '$to_host_file_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # Result will be available in $func_to_host_file_result. # func_to_host_file ARG # Converts the file name ARG from $build format to $host format. Return result # in func_to_host_file_result. func_to_host_file () { $debug_cmd $to_host_file_cmd "$1" } # end func_to_host_file # func_to_tool_file ARG LAZY # converts the file name ARG from $build format to toolchain format. Return # result in func_to_tool_file_result. If the conversion in use is listed # in (the comma separated) LAZY, no conversion takes place. func_to_tool_file () { $debug_cmd case ,$2, in *,"$to_tool_file_cmd",*) func_to_tool_file_result=$1 ;; *) $to_tool_file_cmd "$1" func_to_tool_file_result=$func_to_host_file_result ;; esac } # end func_to_tool_file # func_convert_file_noop ARG # Copy ARG to func_to_host_file_result. func_convert_file_noop () { func_to_host_file_result=$1 } # end func_convert_file_noop # func_convert_file_msys_to_w32 ARG # Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_file_result. func_convert_file_msys_to_w32 () { $debug_cmd func_to_host_file_result=$1 if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_to_host_file_result=$func_convert_core_msys_to_w32_result fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_w32 # func_convert_file_cygwin_to_w32 ARG # Convert file name ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_file_cygwin_to_w32 () { $debug_cmd func_to_host_file_result=$1 if test -n "$1"; then # because $build is cygwin, we call "the" cygpath in $PATH; no need to use # LT_CYGPATH in this case. func_to_host_file_result=`cygpath -m "$1"` fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_cygwin_to_w32 # func_convert_file_nix_to_w32 ARG # Convert file name ARG from *nix to w32 format. Requires a wine environment # and a working winepath. Returns result in func_to_host_file_result. func_convert_file_nix_to_w32 () { $debug_cmd func_to_host_file_result=$1 if test -n "$1"; then func_convert_core_file_wine_to_w32 "$1" func_to_host_file_result=$func_convert_core_file_wine_to_w32_result fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_w32 # func_convert_file_msys_to_cygwin ARG # Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_file_msys_to_cygwin () { $debug_cmd func_to_host_file_result=$1 if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_cygpath -u "$func_convert_core_msys_to_w32_result" func_to_host_file_result=$func_cygpath_result fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_msys_to_cygwin # func_convert_file_nix_to_cygwin ARG # Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed # in a wine environment, working winepath, and LT_CYGPATH set. Returns result # in func_to_host_file_result. func_convert_file_nix_to_cygwin () { $debug_cmd func_to_host_file_result=$1 if test -n "$1"; then # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. func_convert_core_file_wine_to_w32 "$1" func_cygpath -u "$func_convert_core_file_wine_to_w32_result" func_to_host_file_result=$func_cygpath_result fi func_convert_file_check "$1" "$func_to_host_file_result" } # end func_convert_file_nix_to_cygwin ############################################# # $build to $host PATH CONVERSION FUNCTIONS # ############################################# # invoked via '$to_host_path_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # The result will be available in $func_to_host_path_result. # # Path separators are also converted from $build format to $host format. If # ARG begins or ends with a path separator character, it is preserved (but # converted to $host format) on output. # # All path conversion functions are named using the following convention: # file name conversion function : func_convert_file_X_to_Y () # path conversion function : func_convert_path_X_to_Y () # where, for any given $build/$host combination the 'X_to_Y' value is the # same. If conversion functions are added for new $build/$host combinations, # the two new functions must follow this pattern, or func_init_to_host_path_cmd # will break. # func_init_to_host_path_cmd # Ensures that function "pointer" variable $to_host_path_cmd is set to the # appropriate value, based on the value of $to_host_file_cmd. to_host_path_cmd= func_init_to_host_path_cmd () { $debug_cmd if test -z "$to_host_path_cmd"; then func_stripname 'func_convert_file_' '' "$to_host_file_cmd" to_host_path_cmd=func_convert_path_$func_stripname_result fi } # func_to_host_path ARG # Converts the path ARG from $build format to $host format. Return result # in func_to_host_path_result. func_to_host_path () { $debug_cmd func_init_to_host_path_cmd $to_host_path_cmd "$1" } # end func_to_host_path # func_convert_path_noop ARG # Copy ARG to func_to_host_path_result. func_convert_path_noop () { func_to_host_path_result=$1 } # end func_convert_path_noop # func_convert_path_msys_to_w32 ARG # Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic # conversion to w32 is not available inside the cwrapper. Returns result in # func_to_host_path_result. func_convert_path_msys_to_w32 () { $debug_cmd func_to_host_path_result=$1 if test -n "$1"; then # Remove leading and trailing path separator characters from ARG. MSYS # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; # and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result=$func_convert_core_msys_to_w32_result func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_msys_to_w32 # func_convert_path_cygwin_to_w32 ARG # Convert path ARG from Cygwin to w32 format. Returns result in # func_to_host_file_result. func_convert_path_cygwin_to_w32 () { $debug_cmd func_to_host_path_result=$1 if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_cygwin_to_w32 # func_convert_path_nix_to_w32 ARG # Convert path ARG from *nix to w32 format. Requires a wine environment and # a working winepath. Returns result in func_to_host_file_result. func_convert_path_nix_to_w32 () { $debug_cmd func_to_host_path_result=$1 if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_to_host_path_result=$func_convert_core_path_wine_to_w32_result func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" fi } # end func_convert_path_nix_to_w32 # func_convert_path_msys_to_cygwin ARG # Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. # Returns result in func_to_host_file_result. func_convert_path_msys_to_cygwin () { $debug_cmd func_to_host_path_result=$1 if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_msys_to_w32_result" func_to_host_path_result=$func_cygpath_result func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_msys_to_cygwin # func_convert_path_nix_to_cygwin ARG # Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a # a wine environment, working winepath, and LT_CYGPATH set. Returns result in # func_to_host_file_result. func_convert_path_nix_to_cygwin () { $debug_cmd func_to_host_path_result=$1 if test -n "$1"; then # Remove leading and trailing path separator characters from # ARG. msys behavior is inconsistent here, cygpath turns them # into '.;' and ';.', and winepath ignores them completely. func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" func_to_host_path_result=$func_cygpath_result func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi } # end func_convert_path_nix_to_cygwin # func_dll_def_p FILE # True iff FILE is a Windows DLL '.def' file. # Keep in sync with _LT_DLL_DEF_P in libtool.m4 func_dll_def_p () { $debug_cmd func_dll_def_p_tmp=`$SED -n \ -e 's/^[ ]*//' \ -e '/^\(;.*\)*$/d' \ -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \ -e q \ "$1"` test DEF = "$func_dll_def_p_tmp" } # func_mode_compile arg... func_mode_compile () { $debug_cmd # Get the compilation command and the source file. base_compile= srcfile=$nonopt # always keep a non-empty value in "srcfile" suppress_opt=yes suppress_output= arg_mode=normal libobj= later= pie_flag= for arg do case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile lastarg=$arg arg_mode=normal ;; target ) libobj=$arg arg_mode=normal continue ;; normal ) # Accept any command-line options. case $arg in -o) test -n "$libobj" && \ func_fatal_error "you cannot specify '-o' more than once" arg_mode=target continue ;; -pie | -fpie | -fPIE) func_append pie_flag " $arg" continue ;; -shared | -static | -prefer-pic | -prefer-non-pic) func_append later " $arg" continue ;; -no-suppress) suppress_opt=no continue ;; -Xcompiler) arg_mode=arg # the next one goes into the "base_compile" arg list continue # The current "srcfile" will either be retained or ;; # replaced later. I would guess that would be a bug. -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result lastarg= save_ifs=$IFS; IFS=, for arg in $args; do IFS=$save_ifs func_append_quoted lastarg "$arg" done IFS=$save_ifs func_stripname ' ' '' "$lastarg" lastarg=$func_stripname_result # Add the arguments to base_compile. func_append base_compile " $lastarg" continue ;; *) # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # lastarg=$srcfile srcfile=$arg ;; esac # case $arg ;; esac # case $arg_mode # Aesthetically quote the previous argument. func_append_quoted base_compile "$lastarg" done # for arg case $arg_mode in arg) func_fatal_error "you must specify an argument for -Xcompile" ;; target) func_fatal_error "you must specify a target with '-o'" ;; *) # Get the name of the library object. test -z "$libobj" && { func_basename "$srcfile" libobj=$func_basename_result } ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo case $libobj in *.[cCFSifmso] | \ *.ada | *.adb | *.ads | *.asm | \ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) func_xform "$libobj" libobj=$func_xform_result ;; esac case $libobj in *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; *) func_fatal_error "cannot determine name of library object from '$libobj'" ;; esac func_infer_tag $base_compile for arg in $later; do case $arg in -shared) test yes = "$build_libtool_libs" \ || func_fatal_configuration "cannot build a shared library" build_old_libs=no continue ;; -static) build_libtool_libs=no build_old_libs=yes continue ;; -prefer-pic) pic_mode=yes continue ;; -prefer-non-pic) pic_mode=no continue ;; esac done func_quote_for_eval "$libobj" test "X$libobj" != "X$func_quote_for_eval_result" \ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ && func_warning "libobj name '$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" objname=$func_basename_result xdir=$func_dirname_result lobj=$xdir$objdir/$objname test -z "$base_compile" && \ func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. if test yes = "$build_old_libs"; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" fi # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | pw32* | os2* | cegcc*) pic_mode=default ;; esac if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test no = "$compiler_c_o"; then output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext lockfile=$output_obj.lock else output_obj= need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test yes = "$need_locks"; then until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done elif test warn = "$need_locks"; then if test -f "$lockfile"; then $ECHO "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support '-c' and '-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi func_append removelist " $output_obj" $ECHO "$srcfile" > "$lockfile" fi $opt_dry_run || $RM $removelist func_append removelist " $lockfile" trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 srcfile=$func_to_tool_file_result func_quote_for_eval "$srcfile" qsrcfile=$func_quote_for_eval_result # Only build a PIC object if we are building libtool libraries. if test yes = "$build_libtool_libs"; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile if test no != "$pic_mode"; then command="$base_compile $qsrcfile $pic_flag" else # Don't build PIC code command="$base_compile $qsrcfile" fi func_mkdir_p "$xdir$objdir" if test -z "$output_obj"; then # Place PIC objects in $objdir func_append command " -o $lobj" fi func_show_eval_locale "$command" \ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' if test warn = "$need_locks" && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support '-c' and '-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then func_show_eval '$MV "$output_obj" "$lobj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi # Allow error messages only from the first compilation. if test yes = "$suppress_opt"; then suppress_output=' >/dev/null 2>&1' fi fi # Only build a position-dependent object if we build old libraries. if test yes = "$build_old_libs"; then if test yes != "$pic_mode"; then # Don't build PIC code command="$base_compile $qsrcfile$pie_flag" else command="$base_compile $qsrcfile $pic_flag" fi if test yes = "$compiler_c_o"; then func_append command " -o $obj" fi # Suppress compiler output if we already did a PIC compilation. func_append command "$suppress_output" func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' if test warn = "$need_locks" && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support '-c' and '-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then func_show_eval '$MV "$output_obj" "$obj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi fi $opt_dry_run || { func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" # Unlock the critical section if it was locked if test no != "$need_locks"; then removelist=$lockfile $RM "$lockfile" fi } exit $EXIT_SUCCESS } $opt_help || { test compile = "$opt_mode" && func_mode_compile ${1+"$@"} } func_mode_help () { # We need to display help for each of the modes. case $opt_mode in "") # Generic help is extracted from the usage comments # at the start of this file. func_help ;; clean) $ECHO \ "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $ECHO \ "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -no-suppress do not suppress compiler output for multiple passes -prefer-pic try to build PIC objects only -prefer-non-pic try to build non-PIC objects only -shared do not build a '.o' file suitable for static linking -static only build a '.o' file suitable for static linking -Wc,FLAG pass FLAG directly to the compiler COMPILE-COMMAND is a command to be used in creating a 'standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix '.c' with the library object suffix, '.lo'." ;; execute) $ECHO \ "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to '-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $ECHO \ "Usage: $progname [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the '--dry-run' option if you just want to see what would be executed." ;; install) $ECHO \ "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the 'install' or 'cp' program. The following components of INSTALL-COMMAND are treated specially: -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $ECHO \ "Usage: $progname [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -bindir BINDIR specify path to binaries directory (for systems where libraries must be found in the PATH setting at runtime) -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -objectlist FILE use a list of object files found in FILE to specify objects -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes) -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -shared only do dynamic linking of libtool libraries -shrext SUFFIX override the standard shared library file extension -static do not do any dynamic linking of uninstalled libtool libraries -static-libtool-libs do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] -weak LIBNAME declare that the target provides the LIBNAME interface -Wc,FLAG -Xcompiler FLAG pass linker-specific FLAG directly to the compiler -Wl,FLAG -Xlinker FLAG pass linker-specific FLAG directly to the linker -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) All other options (arguments beginning with '-') are ignored. Every other argument is treated as a filename. Files ending in '.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in '.la', then a libtool library is created, only library objects ('.lo' files) may be specified, and '-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created using 'ar' and 'ranlib', or on Windows using 'lib'. If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $ECHO \ "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) func_fatal_help "invalid operation mode '$opt_mode'" ;; esac echo $ECHO "Try '$progname --help' for more information about other modes." } # Now that we've collected a possible --mode arg, show help if necessary if $opt_help; then if test : = "$opt_help"; then func_mode_help else { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do func_mode_help done } | $SED -n '1p; 2,$s/^Usage:/ or: /p' { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do echo func_mode_help done } | $SED '1d /^When reporting/,/^Report/{ H d } $x /information about other modes/d /more detailed .*MODE/d s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' fi exit $? fi # func_mode_execute arg... func_mode_execute () { $debug_cmd # The first argument is the command name. cmd=$nonopt test -z "$cmd" && \ func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. for file in $opt_dlopen; do test -f "$file" \ || func_fatal_help "'$file' is not a file" dir= case $file in *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "'$lib' is not a valid libtool archive" # Read the libtool library. dlname= library_names= func_source "$file" # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && \ func_warning "'$file' was not linked with '-export-dynamic'" continue fi func_dirname "$file" "" "." dir=$func_dirname_result if test -f "$dir/$objdir/$dlname"; then func_append dir "/$objdir" else if test ! -f "$dir/$dlname"; then func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'" fi fi ;; *.lo) # Just add the directory containing the .lo file. func_dirname "$file" "" "." dir=$func_dirname_result ;; *) func_warning "'-dlopen' is ignored for non-libtool libraries and objects" continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir=$absdir # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic=$magic # Check if any of the arguments is a wrapper script. args= for file do case $file in -* | *.la | *.lo ) ;; *) # Do a test to see if this is really a libtool program. if func_ltwrapper_script_p "$file"; then func_source "$file" # Transform arg to wrapped name. file=$progdir/$program elif func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" func_source "$func_ltwrapper_scriptname_result" # Transform arg to wrapped name. file=$progdir/$program fi ;; esac # Quote arguments (to preserve shell metacharacters). func_append_quoted args "$file" done if $opt_dry_run; then # Display what would be done. if test -n "$shlibpath_var"; then eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" echo "export $shlibpath_var" fi $ECHO "$cmd$args" exit $EXIT_SUCCESS else if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved environment variables for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${save_$lt_var+set}\" = set; then $lt_var=\$save_$lt_var; export $lt_var else $lt_unset $lt_var fi" done # Now prepare to actually exec the command. exec_cmd=\$cmd$args fi } test execute = "$opt_mode" && func_mode_execute ${1+"$@"} # func_mode_finish arg... func_mode_finish () { $debug_cmd libs= libdirs= admincmds= for opt in "$nonopt" ${1+"$@"} do if test -d "$opt"; then func_append libdirs " $opt" elif test -f "$opt"; then if func_lalib_unsafe_p "$opt"; then func_append libs " $opt" else func_warning "'$opt' is not a valid libtool archive" fi else func_fatal_error "invalid argument '$opt'" fi done if test -n "$libs"; then if test -n "$lt_sysroot"; then sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" else sysroot_cmd= fi # Remove sysroot references if $opt_dry_run; then for lib in $libs; do echo "removing references to $lt_sysroot and '=' prefixes from $lib" done else tmpdir=`func_mktempdir` for lib in $libs; do $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ > $tmpdir/tmp-la mv -f $tmpdir/tmp-la $lib done ${RM}r "$tmpdir" fi fi if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. func_execute_cmds "$finish_cmds" 'admincmds="$admincmds '"$cmd"'"' fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $opt_dry_run || eval "$cmds" || func_append admincmds " $cmds" fi done fi # Exit here if they wanted silent mode. $opt_quiet && exit $EXIT_SUCCESS if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then echo "----------------------------------------------------------------------" echo "Libraries have been installed in:" for libdir in $libdirs; do $ECHO " $libdir" done echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" echo "specify the full pathname of the library, or use the '-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then echo " - add LIBDIR to the '$shlibpath_var' environment variable" echo " during execution" fi if test -n "$runpath_var"; then echo " - add LIBDIR to the '$runpath_var' environment variable" echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" $ECHO " - use the '$flag' linker flag" fi if test -n "$admincmds"; then $ECHO " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'" fi echo echo "See any operating system documentation about shared libraries for" case $host in solaris2.[6789]|solaris2.1[0-9]) echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" echo "pages." ;; *) echo "more information, such as the ld(1) and ld.so(8) manual pages." ;; esac echo "----------------------------------------------------------------------" fi exit $EXIT_SUCCESS } test finish = "$opt_mode" && func_mode_finish ${1+"$@"} # func_mode_install arg... func_mode_install () { $debug_cmd # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" || # Allow the use of GNU shtool's install command. case $nonopt in *shtool*) :;; *) false;; esac then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " arg=$1 shift else install_prog= arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. func_quote_for_eval "$arg" func_append install_prog "$func_quote_for_eval_result" install_shared_prog=$install_prog case " $install_prog " in *[\\\ /]cp\ *) install_cp=: ;; *) install_cp=false ;; esac # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=false stripme= no_mode=: for arg do arg2= if test -n "$dest"; then func_append files " $dest" dest=$arg continue fi case $arg in -d) isdir=: ;; -f) if $install_cp; then :; else prev=$arg fi ;; -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then if test X-m = "X$prev" && test -n "$install_override_mode"; then arg2=$install_override_mode no_mode=false fi prev= else dest=$arg continue fi ;; esac # Aesthetically quote the argument. func_quote_for_eval "$arg" func_append install_prog " $func_quote_for_eval_result" if test -n "$arg2"; then func_quote_for_eval "$arg2" fi func_append install_shared_prog " $func_quote_for_eval_result" done test -z "$install_prog" && \ func_fatal_help "you must specify an install program" test -n "$prev" && \ func_fatal_help "the '$prev' option requires an argument" if test -n "$install_override_mode" && $no_mode; then if $install_cp; then :; else func_quote_for_eval "$install_override_mode" func_append install_shared_prog " -m $func_quote_for_eval_result" fi fi if test -z "$files"; then if test -z "$dest"; then func_fatal_help "no file or destination specified" else func_fatal_help "you must specify a destination" fi fi # Strip any trailing slash from the destination. func_stripname '' '/' "$dest" dest=$func_stripname_result # Check to see that the destination is a directory. test -d "$dest" && isdir=: if $isdir; then destdir=$dest destname= else func_dirname_and_basename "$dest" "" "." destdir=$func_dirname_result destname=$func_basename_result # Not a directory, so check to see that there is only one file specified. set dummy $files; shift test "$#" -gt 1 && \ func_fatal_help "'$dest' is not a directory" fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) func_fatal_help "'$destdir' must be an absolute directory name" ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic=$magic staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. func_append staticlibs " $file" ;; *.la) func_resolve_sysroot "$file" file=$func_resolve_sysroot_result # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "'$file' is not a valid libtool archive" library_names= old_library= relink_command= func_source "$file" # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) func_append current_libdirs " $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) func_append future_libdirs " $libdir" ;; esac fi func_dirname "$file" "/" "" dir=$func_dirname_result func_append dir "$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that # are installed to the same prefix. # At present, this check doesn't affect windows .dll's that # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. test "$inst_prefix_dir" = "$destdir" && \ func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir" if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` fi func_warning "relinking '$file'" func_show_eval "$relink_command" \ 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"' fi # See the names of the shared library. set dummy $library_names; shift if test -n "$1"; then realname=$1 shift srcname=$realname test -n "$relink_command" && srcname=${realname}T # Install the shared library and build the symlinks. func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ 'exit $?' tstripme=$stripme case $host_os in cygwin* | mingw* | pw32* | cegcc*) case $realname in *.dll.a) tstripme= ;; esac ;; os2*) case $realname in *_dll.a) tstripme= ;; esac ;; esac if test -n "$tstripme" && test -n "$striplib"; then func_show_eval "$striplib $destdir/$realname" 'exit $?' fi if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. # Try 'ln -sf' first, because the 'ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname do test "$linkname" != "$realname" \ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" done fi # Do each command in the postinstall commands. lib=$destdir/$realname func_execute_cmds "$postinstall_cmds" 'exit $?' fi # Install the pseudo-library for information purposes. func_basename "$file" name=$func_basename_result instname=$dir/${name}i func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. test -n "$old_library" && func_append staticlibs " $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile=$destdir/$destname else func_basename "$file" destfile=$func_basename_result destfile=$destdir/$destfile fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) func_lo2o "$destfile" staticdest=$func_lo2o_result ;; *.$objext) staticdest=$destfile destfile= ;; *) func_fatal_help "cannot copy a libtool object to '$destfile'" ;; esac # Install the libtool object if requested. test -n "$destfile" && \ func_show_eval "$install_prog $file $destfile" 'exit $?' # Install the old object if enabled. if test yes = "$build_old_libs"; then # Deduce the name of the old-style object file. func_lo2o "$file" staticobj=$func_lo2o_result func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' fi exit $EXIT_SUCCESS ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile=$destdir/$destname else func_basename "$file" destfile=$func_basename_result destfile=$destdir/$destfile fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install stripped_ext= case $file in *.exe) if test ! -f "$file"; then func_stripname '' '.exe' "$file" file=$func_stripname_result stripped_ext=.exe fi ;; esac # Do a test to see if this is really a libtool program. case $host in *cygwin* | *mingw*) if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" wrapper=$func_ltwrapper_scriptname_result else func_stripname '' '.exe' "$file" wrapper=$func_stripname_result fi ;; *) wrapper=$file ;; esac if func_ltwrapper_script_p "$wrapper"; then notinst_deplibs= relink_command= func_source "$wrapper" # Check the variables that should have been set. test -z "$generated_by_libtool_version" && \ func_fatal_error "invalid libtool wrapper script '$wrapper'" finalize=: for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then func_source "$lib" fi libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'` if test -n "$libdir" && test ! -f "$libfile"; then func_warning "'$lib' has not been installed in '$libdir'" finalize=false fi done relink_command= func_source "$wrapper" outputname= if test no = "$fast_install" && test -n "$relink_command"; then $opt_dry_run || { if $finalize; then tmpdir=`func_mktempdir` func_basename "$file$stripped_ext" file=$func_basename_result outputname=$tmpdir/$file # Replace the output file specification. relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` $opt_quiet || { func_quote_for_expand "$relink_command" eval "func_echo $func_quote_for_expand_result" } if eval "$relink_command"; then : else func_error "error: relink '$file' with the above command before installing it" $opt_dry_run || ${RM}r "$tmpdir" continue fi file=$outputname else func_warning "cannot relink '$file'" fi } else # Install the binary that we compiled earlier. file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyway case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) func_stripname '' '.exe' "$destfile" destfile=$func_stripname_result ;; esac ;; esac func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' $opt_dry_run || if test -n "$outputname"; then ${RM}r "$tmpdir" fi ;; esac done for file in $staticlibs; do func_basename "$file" name=$func_basename_result # Set up the ranlib parameters. oldlib=$destdir/$name func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 tool_oldlib=$func_to_tool_file_result func_show_eval "$install_prog \$file \$oldlib" 'exit $?' if test -n "$stripme" && test -n "$old_striplib"; then func_show_eval "$old_striplib $tool_oldlib" 'exit $?' fi # Do each command in the postinstall commands. func_execute_cmds "$old_postinstall_cmds" 'exit $?' done test -n "$future_libdirs" && \ func_warning "remember to run '$progname --finish$future_libdirs'" if test -n "$current_libdirs"; then # Maybe just do a dry run. $opt_dry_run && current_libdirs=" -n$current_libdirs" exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi } test install = "$opt_mode" && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p # Extract symbols from dlprefiles and create ${outputname}S.o with # a dlpreopen symbol table. func_generate_dlsyms () { $debug_cmd my_outputname=$1 my_originator=$2 my_pic_p=${3-false} my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'` my_dlsyms= if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then if test -n "$NM" && test -n "$global_symbol_pipe"; then my_dlsyms=${my_outputname}S.c else func_error "not configured to extract global symbols from dlpreopened files" fi fi if test -n "$my_dlsyms"; then case $my_dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist=$output_objdir/$my_outputname.nm func_show_eval "$RM $nlist ${nlist}S ${nlist}T" # Parse the name list into a source file. func_verbose "creating $output_objdir/$my_dlsyms" $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ /* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */ /* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */ #ifdef __cplusplus extern \"C\" { #endif #if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) #pragma GCC diagnostic ignored \"-Wstrict-prototypes\" #endif /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ #if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE /* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST #elif defined __osf__ /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif #define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) /* External symbol declarations for the compiler. */\ " if test yes = "$dlself"; then func_verbose "generating symbol list for '$output'" $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` for progfile in $progfiles; do func_to_tool_file "$progfile" func_convert_file_msys_to_w32 func_verbose "extracting global C symbols from '$func_to_tool_file_result'" $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $opt_dry_run || { eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi if test -n "$export_symbols_regex"; then $opt_dry_run || { eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols=$output_objdir/$outputname.exp $opt_dry_run || { $RM $export_symbols eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ;; esac } else $opt_dry_run || { eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; esac } fi fi for dlprefile in $dlprefiles; do func_verbose "extracting global C symbols from '$dlprefile'" func_basename "$dlprefile" name=$func_basename_result case $host in *cygwin* | *mingw* | *cegcc* ) # if an import library, we need to obtain dlname if func_win32_import_lib_p "$dlprefile"; then func_tr_sh "$dlprefile" eval "curr_lafile=\$libfile_$func_tr_sh_result" dlprefile_dlbasename= if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then # Use subshell, to avoid clobbering current variable values dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` if test -n "$dlprefile_dlname"; then func_basename "$dlprefile_dlname" dlprefile_dlbasename=$func_basename_result else # no lafile. user explicitly requested -dlpreopen . $sharedlib_from_linklib_cmd "$dlprefile" dlprefile_dlbasename=$sharedlib_from_linklib_result fi fi $opt_dry_run || { if test -n "$dlprefile_dlbasename"; then eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' else func_warning "Could not compute DLL name from $name" eval '$ECHO ": $name " >> "$nlist"' fi func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" } else # not an import lib $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } fi ;; *) $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" } ;; esac done $opt_dry_run || { # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $MV "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if $GREP -v "^: " < "$nlist" | if sort -k 3 /dev/null 2>&1; then sort -k 3 else sort +2 fi | uniq > "$nlist"S; then : else $GREP -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' else echo '/* NONE */' >> "$output_objdir/$my_dlsyms" fi func_show_eval '$RM "${nlist}I"' if test -n "$global_symbol_to_import"; then eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I' fi echo >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ typedef struct { const char *name; void *address; } lt_dlsymlist; extern LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[];\ " if test -s "$nlist"I; then echo >> "$output_objdir/$my_dlsyms" "\ static void lt_syminit(void) { LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols; for (; symbol->name; ++symbol) {" $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms" echo >> "$output_objdir/$my_dlsyms" "\ } }" fi echo >> "$output_objdir/$my_dlsyms" "\ LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = { {\"$my_originator\", (void *) 0}," if test -s "$nlist"I; then echo >> "$output_objdir/$my_dlsyms" "\ {\"@INIT@\", (void *) <_syminit}," fi case $need_lib_prefix in no) eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; *) eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; esac echo >> "$output_objdir/$my_dlsyms" "\ {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_${my_prefix}_LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " } # !$opt_dry_run pic_flag_for_symtable= case "$compile_command " in *" -static "*) ;; *) case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; *-*-hpux*) pic_flag_for_symtable=" $pic_flag" ;; *) $my_pic_p && pic_flag_for_symtable=" $pic_flag" ;; esac ;; esac symtab_cflags= for arg in $LTCFLAGS; do case $arg in -pie | -fpie | -fPIE) ;; *) func_append symtab_cflags " $arg" ;; esac done # Now compile the dynamic symbol file. func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' # Clean up the generated files. func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"' # Transform the symbol file into the correct name. symfileobj=$output_objdir/${my_outputname}S.$objext case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` fi ;; *) compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` ;; esac ;; *) func_fatal_error "unknown suffix for '$my_dlsyms'" ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` fi } # func_cygming_gnu_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is a GNU/binutils-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_gnu_implib_p () { $debug_cmd func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` test -n "$func_cygming_gnu_implib_tmp" } # func_cygming_ms_implib_p ARG # This predicate returns with zero status (TRUE) if # ARG is an MS-style import library. Returns # with nonzero status (FALSE) otherwise. func_cygming_ms_implib_p () { $debug_cmd func_to_tool_file "$1" func_convert_file_msys_to_w32 func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` test -n "$func_cygming_ms_implib_tmp" } # func_win32_libid arg # return the library type of file 'arg' # # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. # Despite the name, also deal with 64 bit binaries. func_win32_libid () { $debug_cmd win32_libid_type=unknown win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then case $nm_interface in "MS dumpbin") if func_cygming_ms_implib_p "$1" || func_cygming_gnu_implib_p "$1" then win32_nmres=import else win32_nmres= fi ;; *) func_to_tool_file "$1" func_convert_file_msys_to_w32 win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | $SED -n -e ' 1,100{ / I /{ s|.*|import| p q } }'` ;; esac case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; esac fi ;; *DLL*) win32_libid_type="x86 DLL" ;; *executable*) # but shell scripts are "executable" too... case $win32_fileres in *MS\ Windows\ PE\ Intel*) win32_libid_type="x86 DLL" ;; esac ;; esac $ECHO "$win32_libid_type" } # func_cygming_dll_for_implib ARG # # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib () { $debug_cmd sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` } # func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs # # The is the core of a fallback implementation of a # platform-specific function to extract the name of the # DLL associated with the specified import library LIBNAME. # # SECTION_NAME is either .idata$6 or .idata$7, depending # on the platform and compiler that created the implib. # # Echos the name of the DLL associated with the # specified import library. func_cygming_dll_for_implib_fallback_core () { $debug_cmd match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` $OBJDUMP -s --section "$1" "$2" 2>/dev/null | $SED '/^Contents of section '"$match_literal"':/{ # Place marker at beginning of archive member dllname section s/.*/====MARK====/ p d } # These lines can sometimes be longer than 43 characters, but # are always uninteresting /:[ ]*file format pe[i]\{,1\}-/d /^In archive [^:]*:/d # Ensure marker is printed /^====MARK====/p # Remove all lines with less than 43 characters /^.\{43\}/!d # From remaining lines, remove first 43 characters s/^.\{43\}//' | $SED -n ' # Join marker and all lines until next marker into a single line /^====MARK====/ b para H $ b para b :para x s/\n//g # Remove the marker s/^====MARK====// # Remove trailing dots and whitespace s/[\. \t]*$// # Print /./p' | # we now have a list, one entry per line, of the stringified # contents of the appropriate section of all members of the # archive that possess that section. Heuristic: eliminate # all those that have a first or second character that is # a '.' (that is, objdump's representation of an unprintable # character.) This should work for all archives with less than # 0x302f exports -- but will fail for DLLs whose name actually # begins with a literal '.' or a single character followed by # a '.'. # # Of those that remain, print the first one. $SED -e '/^\./d;/^.\./d;q' } # func_cygming_dll_for_implib_fallback ARG # Platform-specific function to extract the # name of the DLL associated with the specified # import library ARG. # # This fallback implementation is for use when $DLLTOOL # does not support the --identify-strict option. # Invoked by eval'ing the libtool variable # $sharedlib_from_linklib_cmd # Result is available in the variable # $sharedlib_from_linklib_result func_cygming_dll_for_implib_fallback () { $debug_cmd if func_cygming_gnu_implib_p "$1"; then # binutils import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` elif func_cygming_ms_implib_p "$1"; then # ms-generated import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` else # unknown sharedlib_from_linklib_result= fi } # func_extract_an_archive dir oldlib func_extract_an_archive () { $debug_cmd f_ex_an_ar_dir=$1; shift f_ex_an_ar_oldlib=$1 if test yes = "$lock_old_archive_extraction"; then lockfile=$f_ex_an_ar_oldlib.lock until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done fi func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ 'stat=$?; rm -f "$lockfile"; exit $stat' if test yes = "$lock_old_archive_extraction"; then $opt_dry_run || rm -f "$lockfile" fi if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" fi } # func_extract_archives gentop oldlib ... func_extract_archives () { $debug_cmd my_gentop=$1; shift my_oldlibs=${1+"$@"} my_oldobjs= my_xlib= my_xabs= my_xdir= for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac func_basename "$my_xlib" my_xlib=$func_basename_result my_xlib_u=$my_xlib while :; do case " $extracted_archives " in *" $my_xlib_u "*) func_arith $extracted_serial + 1 extracted_serial=$func_arith_result my_xlib_u=lt$extracted_serial-$my_xlib ;; *) break ;; esac done extracted_archives="$extracted_archives $my_xlib_u" my_xdir=$my_gentop/$my_xlib_u func_mkdir_p "$my_xdir" case $host in *-darwin*) func_verbose "Extracting $my_xabs" # Do not bother doing anything if just a dry run $opt_dry_run || { darwin_orig_dir=`pwd` cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` func_basename "$darwin_archive" darwin_base_archive=$func_basename_result darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` if test -n "$darwin_arches"; then darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" for darwin_arch in $darwin_arches; do func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch" $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive" cd "unfat-$$/$darwin_base_archive-$darwin_arch" func_extract_an_archive "`pwd`" "$darwin_base_archive" cd "$darwin_curdir" $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" done # $darwin_arches ## Okay now we've a bunch of thin objects, gotta fatten them up :) darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` $LIPO -create -output "$darwin_file" $darwin_files done # $darwin_filelist $RM -rf unfat-$$ cd "$darwin_orig_dir" else cd $darwin_orig_dir func_extract_an_archive "$my_xdir" "$my_xabs" fi # $darwin_arches } # !$opt_dry_run ;; *) func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` done func_extract_archives_result=$my_oldobjs } # func_emit_wrapper [arg=no] # # Emit a libtool wrapper script on stdout. # Don't directly open a file because we may want to # incorporate the script contents within a cygwin/mingw # wrapper executable. Must ONLY be called from within # func_mode_link because it depends on a number of variables # set therein. # # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR # variable will take. If 'yes', then the emitted script # will assume that the directory where it is stored is # the $objdir directory. This is a cygwin/mingw-specific # behavior. func_emit_wrapper () { func_emit_wrapper_arg1=${1-no} $ECHO "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM (GNU $PACKAGE) $VERSION # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. sed_quote_subst='$sed_quote_subst' # Be Bourne compatible if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variables: generated_by_libtool_version='$macro_version' notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$ECHO are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then file=\"\$0\"" qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` $ECHO "\ # A function that is used when there is no print builtin or printf. func_fallback_echo () { eval 'cat <<_LTECHO_EOF \$1 _LTECHO_EOF' } ECHO=\"$qECHO\" fi # Very basic option parsing. These options are (a) specific to # the libtool wrapper, (b) are identical between the wrapper # /script/ and the wrapper /executable/ that is used only on # windows platforms, and (c) all begin with the string "--lt-" # (application programs are unlikely to have options that match # this pattern). # # There are only two supported options: --lt-debug and # --lt-dump-script. There is, deliberately, no --lt-help. # # The first argument to this parsing function should be the # script's $0 value, followed by "$@". lt_option_debug= func_parse_lt_options () { lt_script_arg0=\$0 shift for lt_opt do case \"\$lt_opt\" in --lt-debug) lt_option_debug=1 ;; --lt-dump-script) lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` cat \"\$lt_dump_D/\$lt_dump_F\" exit 0 ;; --lt-*) \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 exit 1 ;; esac done # Print the debug banner immediately: if test -n \"\$lt_option_debug\"; then echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2 fi } # Used when --lt-debug. Prints its arguments to stdout # (redirection is the responsibility of the caller) func_lt_dump_args () { lt_dump_args_N=1; for lt_arg do \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\" lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` done } # Core function for launching the target application func_exec_program_core () { " case $host in # Backslashes separate directories on plain windows *-*-mingw | *-*-os2* | *-cegcc*) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac $ECHO "\ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 exit 1 } # A function to encapsulate launching the target application # Strips options in the --lt-* namespace from \$@ and # launches target application with the remaining arguments. func_exec_program () { case \" \$* \" in *\\ --lt-*) for lt_wr_arg do case \$lt_wr_arg in --lt-*) ;; *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; esac shift done ;; esac func_exec_program_core \${1+\"\$@\"} } # Parse options func_parse_lt_options \"\$0\" \${1+\"\$@\"} # Find the directory that this script lives in. thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` done # Usually 'no', except on cygwin/mingw when embedded into # the cwrapper. WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then # special case for '.' if test \"\$thisdir\" = \".\"; then thisdir=\`pwd\` fi # remove .libs from thisdir case \"\$thisdir\" in *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; $objdir ) thisdir=. ;; esac fi # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test yes = "$fast_install"; then $ECHO "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $MKDIR \"\$progdir\" else $RM \"\$progdir/\$file\" fi" $ECHO "\ # relink executable if necessary if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else \$ECHO \"\$relink_command_output\" >&2 $RM \"\$progdir/\$file\" exit 1 fi fi $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $RM \"\$progdir/\$program\"; $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } $RM \"\$progdir/\$file\" fi" else $ECHO "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi $ECHO "\ if test -f \"\$progdir/\$program\"; then" # fixup the dll searchpath if we need to. # # Fix the DLL searchpath if we need to. Do this before prepending # to shlibpath, because on Windows, both are PATH and uninstalled # libraries must come first. if test -n "$dllsearchpath"; then $ECHO "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi # Export our shlibpath_var if we have one. if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` export $shlibpath_var " fi $ECHO "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. func_exec_program \${1+\"\$@\"} fi else # The program doesn't exist. \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi fi\ " } # func_emit_cwrapperexe_src # emit the source code for a wrapper executable on stdout # Must ONLY be called from within func_mode_link because # it depends on a number of variable set therein. func_emit_cwrapperexe_src () { cat < #include #ifdef _MSC_VER # include # include # include #else # include # include # ifdef __CYGWIN__ # include # endif #endif #include #include #include #include #include #include #include #include #define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) /* declarations of non-ANSI functions */ #if defined __MINGW32__ # ifdef __STRICT_ANSI__ int _putenv (const char *); # endif #elif defined __CYGWIN__ # ifdef __STRICT_ANSI__ char *realpath (const char *, char *); int putenv (char *); int setenv (const char *, const char *, int); # endif /* #elif defined other_platform || defined ... */ #endif /* portability defines, excluding path handling macros */ #if defined _MSC_VER # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv # define S_IXUSR _S_IEXEC #elif defined __MINGW32__ # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv #elif defined __CYGWIN__ # define HAVE_SETENV # define FOPEN_WB "wb" /* #elif defined other platforms ... */ #endif #if defined PATH_MAX # define LT_PATHMAX PATH_MAX #elif defined MAXPATHLEN # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 #endif #ifndef S_IXOTH # define S_IXOTH 0 #endif #ifndef S_IXGRP # define S_IXGRP 0 #endif /* path handling portability macros */ #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' #endif #if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \ defined __OS2__ # define HAVE_DOS_BASED_FILE_SYSTEM # define FOPEN_WB "wb" # ifndef DIR_SEPARATOR_2 # define DIR_SEPARATOR_2 '\\' # endif # ifndef PATH_SEPARATOR_2 # define PATH_SEPARATOR_2 ';' # endif #endif #ifndef DIR_SEPARATOR_2 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) #else /* DIR_SEPARATOR_2 */ # define IS_DIR_SEPARATOR(ch) \ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) #endif /* DIR_SEPARATOR_2 */ #ifndef PATH_SEPARATOR_2 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) #else /* PATH_SEPARATOR_2 */ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ #ifndef FOPEN_WB # define FOPEN_WB "w" #endif #ifndef _O_BINARY # define _O_BINARY 0 #endif #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ if (stale) { free (stale); stale = 0; } \ } while (0) #if defined LT_DEBUGWRAPPER static int lt_debug = 1; #else static int lt_debug = 0; #endif const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ void *xmalloc (size_t num); char *xstrdup (const char *string); const char *base_name (const char *name); char *find_executable (const char *wrapper); char *chase_symlinks (const char *pathspec); int make_executable (const char *path); int check_executable (const char *path); char *strendzap (char *str, const char *pat); void lt_debugprintf (const char *file, int line, const char *fmt, ...); void lt_fatal (const char *file, int line, const char *message, ...); static const char *nonnull (const char *s); static const char *nonempty (const char *s); void lt_setenv (const char *name, const char *value); char *lt_extend_str (const char *orig_value, const char *add, int to_end); void lt_update_exe_path (const char *name, const char *value); void lt_update_lib_path (const char *name, const char *value); char **prepare_spawn (char **argv); void lt_dump_script (FILE *f); EOF cat <= 0) && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) return 1; else return 0; } int make_executable (const char *path) { int rval = 0; struct stat st; lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", nonempty (path)); if ((!path) || (!*path)) return 0; if (stat (path, &st) >= 0) { rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); } return rval; } /* Searches for the full path of the wrapper. Returns newly allocated full path name if found, NULL otherwise Does not chase symlinks, even on platforms that support them. */ char * find_executable (const char *wrapper) { int has_slash = 0; const char *p; const char *p_next; /* static buffer for getcwd */ char tmp[LT_PATHMAX + 1]; size_t tmp_len; char *concat_name; lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", nonempty (wrapper)); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; /* Absolute path? */ #if defined HAVE_DOS_BASED_FILE_SYSTEM if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } else { #endif if (IS_DIR_SEPARATOR (wrapper[0])) { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } #if defined HAVE_DOS_BASED_FILE_SYSTEM } #endif for (p = wrapper; *p; p++) if (*p == '/') { has_slash = 1; break; } if (!has_slash) { /* no slashes; search PATH */ const char *path = getenv ("PATH"); if (path != NULL) { for (p = path; *p; p = p_next) { const char *q; size_t p_len; for (q = p; *q; q++) if (IS_PATH_SEPARATOR (*q)) break; p_len = (size_t) (q - p); p_next = (*q == '\0' ? q : q + 1); if (p_len == 0) { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); } else { concat_name = XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, p, p_len); concat_name[p_len] = '/'; strcpy (concat_name + p_len + 1, wrapper); } if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } } /* not found in PATH; assume curdir */ } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", nonnull (strerror (errno))); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); return NULL; } char * chase_symlinks (const char *pathspec) { #ifndef S_ISLNK return xstrdup (pathspec); #else char buf[LT_PATHMAX]; struct stat s; char *tmp_pathspec = xstrdup (pathspec); char *p; int has_symlinks = 0; while (strlen (tmp_pathspec) && !has_symlinks) { lt_debugprintf (__FILE__, __LINE__, "checking path component for symlinks: %s\n", tmp_pathspec); if (lstat (tmp_pathspec, &s) == 0) { if (S_ISLNK (s.st_mode) != 0) { has_symlinks = 1; break; } /* search backwards for last DIR_SEPARATOR */ p = tmp_pathspec + strlen (tmp_pathspec) - 1; while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) p--; if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) { /* no more DIR_SEPARATORS left */ break; } *p = '\0'; } else { lt_fatal (__FILE__, __LINE__, "error accessing file \"%s\": %s", tmp_pathspec, nonnull (strerror (errno))); } } XFREE (tmp_pathspec); if (!has_symlinks) { return xstrdup (pathspec); } tmp_pathspec = realpath (pathspec, buf); if (tmp_pathspec == 0) { lt_fatal (__FILE__, __LINE__, "could not follow symlinks for %s", pathspec); } return xstrdup (tmp_pathspec); #endif } char * strendzap (char *str, const char *pat) { size_t len, patlen; assert (str != NULL); assert (pat != NULL); len = strlen (str); patlen = strlen (pat); if (patlen <= len) { str += len - patlen; if (STREQ (str, pat)) *str = '\0'; } return str; } void lt_debugprintf (const char *file, int line, const char *fmt, ...) { va_list args; if (lt_debug) { (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); va_start (args, fmt); (void) vfprintf (stderr, fmt, args); va_end (args); } } static void lt_error_core (int exit_status, const char *file, int line, const char *mode, const char *message, va_list ap) { fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); if (exit_status >= 0) exit (exit_status); } void lt_fatal (const char *file, int line, const char *message, ...) { va_list ap; va_start (ap, message); lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); va_end (ap); } static const char * nonnull (const char *s) { return s ? s : "(null)"; } static const char * nonempty (const char *s) { return (s && !*s) ? "(empty)" : nonnull (s); } void lt_setenv (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_setenv) setting '%s' to '%s'\n", nonnull (name), nonnull (value)); { #ifdef HAVE_SETENV /* always make a copy, for consistency with !HAVE_SETENV */ char *str = xstrdup (value); setenv (name, str, 1); #else size_t len = strlen (name) + 1 + strlen (value) + 1; char *str = XMALLOC (char, len); sprintf (str, "%s=%s", name, value); if (putenv (str) != EXIT_SUCCESS) { XFREE (str); } #endif } } char * lt_extend_str (const char *orig_value, const char *add, int to_end) { char *new_value; if (orig_value && *orig_value) { size_t orig_value_len = strlen (orig_value); size_t add_len = strlen (add); new_value = XMALLOC (char, add_len + orig_value_len + 1); if (to_end) { strcpy (new_value, orig_value); strcpy (new_value + orig_value_len, add); } else { strcpy (new_value, add); strcpy (new_value + add_len, orig_value); } } else { new_value = xstrdup (add); } return new_value; } void lt_update_exe_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); /* some systems can't cope with a ':'-terminated path #' */ size_t len = strlen (new_value); while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1])) { new_value[--len] = '\0'; } lt_setenv (name, new_value); XFREE (new_value); } } void lt_update_lib_path (const char *name, const char *value) { lt_debugprintf (__FILE__, __LINE__, "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", nonnull (name), nonnull (value)); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); lt_setenv (name, new_value); XFREE (new_value); } } EOF case $host_os in mingw*) cat <<"EOF" /* Prepares an argument vector before calling spawn(). Note that spawn() does not by itself call the command interpreter (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); GetVersionEx(&v); v.dwPlatformId == VER_PLATFORM_WIN32_NT; }) ? "cmd.exe" : "command.com"). Instead it simply concatenates the arguments, separated by ' ', and calls CreateProcess(). We must quote the arguments since Win32 CreateProcess() interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a special way: - Space and tab are interpreted as delimiters. They are not treated as delimiters if they are surrounded by double quotes: "...". - Unescaped double quotes are removed from the input. Their only effect is that within double quotes, space and tab are treated like normal characters. - Backslashes not followed by double quotes are not special. - But 2*n+1 backslashes followed by a double quote become n backslashes followed by a double quote (n >= 0): \" -> " \\\" -> \" \\\\\" -> \\" */ #define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" #define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" char ** prepare_spawn (char **argv) { size_t argc; char **new_argv; size_t i; /* Count number of arguments. */ for (argc = 0; argv[argc] != NULL; argc++) ; /* Allocate new argument vector. */ new_argv = XMALLOC (char *, argc + 1); /* Put quoted arguments into the new argument vector. */ for (i = 0; i < argc; i++) { const char *string = argv[i]; if (string[0] == '\0') new_argv[i] = xstrdup ("\"\""); else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) { int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); size_t length; unsigned int backslashes; const char *s; char *quoted_string; char *p; length = 0; backslashes = 0; if (quote_around) length++; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') length += backslashes + 1; length++; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) length += backslashes + 1; quoted_string = XMALLOC (char, length + 1); p = quoted_string; backslashes = 0; if (quote_around) *p++ = '"'; for (s = string; *s != '\0'; s++) { char c = *s; if (c == '"') { unsigned int j; for (j = backslashes + 1; j > 0; j--) *p++ = '\\'; } *p++ = c; if (c == '\\') backslashes++; else backslashes = 0; } if (quote_around) { unsigned int j; for (j = backslashes; j > 0; j--) *p++ = '\\'; *p++ = '"'; } *p = '\0'; new_argv[i] = quoted_string; } else new_argv[i] = (char *) string; } new_argv[argc] = NULL; return new_argv; } EOF ;; esac cat <<"EOF" void lt_dump_script (FILE* f) { EOF func_emit_wrapper yes | $SED -n -e ' s/^\(.\{79\}\)\(..*\)/\1\ \2/ h s/\([\\"]\)/\\\1/g s/$/\\n/ s/\([^\n]*\).*/ fputs ("\1", f);/p g D' cat <<"EOF" } EOF } # end: func_emit_cwrapperexe_src # func_win32_import_lib_p ARG # True if ARG is an import lib, as indicated by $file_magic_cmd func_win32_import_lib_p () { $debug_cmd case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in *import*) : ;; *) false ;; esac } # func_suncc_cstd_abi # !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!! # Several compiler flags select an ABI that is incompatible with the # Cstd library. Avoid specifying it if any are in CXXFLAGS. func_suncc_cstd_abi () { $debug_cmd case " $compile_command " in *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*) suncc_use_cstd_abi=no ;; *) suncc_use_cstd_abi=yes ;; esac } # func_mode_link arg... func_mode_link () { $debug_cmd case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # what system we are compiling for in order to pass an extra # flag for every libtool invocation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying # to make a dll that has undefined symbols, in which case not # even a static library is built. For now, we need to specify # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. allow_undefined=yes ;; *) allow_undefined=yes ;; esac libtool_args=$nonopt base_compile="$nonopt $@" compile_command=$nonopt finalize_command=$nonopt compile_rpath= finalize_rpath= compile_shlibpath= finalize_shlibpath= convenience= old_convenience= deplibs= old_deplibs= compiler_flags= linker_flags= dllsearchpath= lib_search_path=`pwd` inst_prefix_dir= new_inherited_linker_flags= avoid_version=no bindir= dlfiles= dlprefiles= dlself=no export_dynamic=no export_symbols= export_symbols_regex= generated= libobjs= ltlibs= module=no no_install=no objs= os2dllname= non_pic_objects= precious_files_regex= prefer_static_libs=no preload=false prev= prevarg= release= rpath= xrpath= perm_rpath= temp_rpath= thread_safe=no vinfo= vinfo_number=no weak_libs= single_module=$wl-single_module func_infer_tag $base_compile # We need to know -static, to get the right output filenames. for arg do case $arg in -shared) test yes != "$build_libtool_libs" \ && func_fatal_configuration "cannot build a shared library" build_old_libs=no break ;; -all-static | -static | -static-libtool-libs) case $arg in -all-static) if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built ;; -static-libtool-libs) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; esac build_libtool_libs=no build_old_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do arg=$1 shift func_quote_for_eval "$arg" qarg=$func_quote_for_eval_unquoted_result func_append libtool_args " $func_quote_for_eval_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) func_append compile_command " @OUTPUT@" func_append finalize_command " @OUTPUT@" ;; esac case $prev in bindir) bindir=$arg prev= continue ;; dlfiles|dlprefiles) $preload || { # Add the symbol object into the linking commands. func_append compile_command " @SYMFILE@" func_append finalize_command " @SYMFILE@" preload=: } case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test no = "$dlself"; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test dlprefiles = "$prev"; then dlself=yes elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test dlfiles = "$prev"; then func_append dlfiles " $arg" else func_append dlprefiles " $arg" fi prev= continue ;; esac ;; expsyms) export_symbols=$arg test -f "$arg" \ || func_fatal_error "symbol file '$arg' does not exist" prev= continue ;; expsyms_regex) export_symbols_regex=$arg prev= continue ;; framework) case $host in *-*-darwin*) case "$deplibs " in *" $qarg.ltframework "*) ;; *) func_append deplibs " $qarg.ltframework" # this is fixed later ;; esac ;; esac prev= continue ;; inst_prefix) inst_prefix_dir=$arg prev= continue ;; mllvm) # Clang does not use LLVM to link, so we can simply discard any # '-mllvm $arg' options when doing the link step. prev= continue ;; objectlist) if test -f "$arg"; then save_arg=$arg moreargs= for fil in `cat "$save_arg"` do # func_append moreargs " $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test none = "$pic_object" && test none = "$non_pic_object"; then func_fatal_error "cannot find name of object for '$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir=$func_dirname_result if test none != "$pic_object"; then # Prepend the subdirectory the object is found in. pic_object=$xdir$pic_object if test dlfiles = "$prev"; then if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test dlprefiles = "$prev"; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg=$pic_object fi # Non-PIC object. if test none != "$non_pic_object"; then # Prepend the subdirectory the object is found in. non_pic_object=$xdir$non_pic_object # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test none = "$pic_object"; then arg=$non_pic_object fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object=$pic_object func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir=$func_dirname_result func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "'$arg' is not a valid libtool object" fi fi done else func_fatal_error "link input file '$arg' does not exist" fi arg=$save_arg prev= continue ;; os2dllname) os2dllname=$arg prev= continue ;; precious_regex) precious_files_regex=$arg prev= continue ;; release) release=-$arg prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac if test rpath = "$prev"; then case "$rpath " in *" $arg "*) ;; *) func_append rpath " $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) func_append xrpath " $arg" ;; esac fi prev= continue ;; shrext) shrext_cmds=$arg prev= continue ;; weak) func_append weak_libs " $arg" prev= continue ;; xcclinker) func_append linker_flags " $qarg" func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xcompiler) func_append compiler_flags " $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xlinker) func_append linker_flags " $qarg" func_append compiler_flags " $wl$qarg" prev= func_append compile_command " $wl$qarg" func_append finalize_command " $wl$qarg" continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi # test -n "$prev" prevarg=$arg case $arg in -all-static) if test -n "$link_static_flag"; then # See comment for -static flag below, for more details. func_append compile_command " $link_static_flag" func_append finalize_command " $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. func_fatal_error "'-allow-undefined' must not be used because it is the default" ;; -avoid-version) avoid_version=yes continue ;; -bindir) prev=bindir continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then func_fatal_error "more than one -exported-symbols argument is not allowed" fi if test X-export-symbols = "X$arg"; then prev=expsyms else prev=expsyms_regex fi continue ;; -framework) prev=framework continue ;; -inst-prefix-dir) prev=inst_prefix continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) func_append compile_command " $arg" func_append finalize_command " $arg" ;; esac continue ;; -L*) func_stripname "-L" '' "$arg" if test -z "$func_stripname_result"; then if test "$#" -gt 0; then func_fatal_error "require no space between '-L' and '$1'" else func_fatal_error "need path for '-L' option" fi fi func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` test -z "$absdir" && \ func_fatal_error "cannot determine absolute directory name of '$dir'" dir=$absdir ;; esac case "$deplibs " in *" -L$dir "* | *" $arg "*) # Will only happen for absolute or sysroot arguments ;; *) # Preserve sysroot, but never include relative directories case $dir in [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; *) func_append deplibs " -L$dir" ;; esac func_append lib_search_path " $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; ::) dllsearchpath=$dir;; *) func_append dllsearchpath ":$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac continue ;; -l*) if test X-lc = "X$arg" || test X-lm = "X$arg"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) # These systems don't actually have a C or math library (as such) continue ;; *-*-os2*) # These systems don't actually have a C library (as such) test X-lc = "X$arg" && continue ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) # Do not include libc due to us having libc/libc_r. test X-lc = "X$arg" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework func_append deplibs " System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype test X-lc = "X$arg" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work test X-lc = "X$arg" && continue ;; esac elif test X-lc_r = "X$arg"; then case $host in *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) # Do not include libc_r directly, use -pthread flag. continue ;; esac fi func_append deplibs " $arg" continue ;; -mllvm) prev=mllvm continue ;; -module) module=yes continue ;; # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. -model|-arch|-isysroot|--sysroot) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" prev=xcompiler continue ;; -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" case "$new_inherited_linker_flags " in *" $arg "*) ;; * ) func_append new_inherited_linker_flags " $arg" ;; esac continue ;; -multi_module) single_module=$wl-multi_module continue ;; -no-fast-install) fast_install=no continue ;; -no-install) case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. func_warning "'-no-install' is ignored for $host" func_warning "assuming '-no-fast-install' instead" fast_install=no ;; *) no_install=yes ;; esac continue ;; -no-undefined) allow_undefined=no continue ;; -objectlist) prev=objectlist continue ;; -os2dllname) prev=os2dllname continue ;; -o) prev=output ;; -precious-files-regex) prev=precious_regex continue ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -R) prev=xrpath continue ;; -R*) func_stripname '-R' '' "$arg" dir=$func_stripname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; =*) func_stripname '=' '' "$dir" dir=$lt_sysroot$func_stripname_result ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in *" $dir "*) ;; *) func_append xrpath " $dir" ;; esac continue ;; -shared) # The effects of -shared are defined in a previous loop. continue ;; -shrext) prev=shrext continue ;; -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects # would be equivalent was wrong. It would break on at least # Digital Unix and AIX. continue ;; -thread-safe) thread_safe=yes continue ;; -version-info) prev=vinfo continue ;; -version-number) prev=vinfo vinfo_number=yes continue ;; -weak) prev=weak continue ;; -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result arg= save_ifs=$IFS; IFS=, for flag in $args; do IFS=$save_ifs func_quote_for_eval "$flag" func_append arg " $func_quote_for_eval_result" func_append compiler_flags " $func_quote_for_eval_result" done IFS=$save_ifs func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Wl,*) func_stripname '-Wl,' '' "$arg" args=$func_stripname_result arg= save_ifs=$IFS; IFS=, for flag in $args; do IFS=$save_ifs func_quote_for_eval "$flag" func_append arg " $wl$func_quote_for_eval_result" func_append compiler_flags " $wl$func_quote_for_eval_result" func_append linker_flags " $func_quote_for_eval_result" done IFS=$save_ifs func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Xcompiler) prev=xcompiler continue ;; -Xlinker) prev=xlinker continue ;; -XCClinker) prev=xcclinker continue ;; # -msg_* for osf cc -msg_*) func_quote_for_eval "$arg" arg=$func_quote_for_eval_result ;; # Flags to be passed through unchanged, with rationale: # -64, -mips[0-9] enable 64-bit mode for the SGI compiler # -r[0-9][0-9]* specify processor for the SGI compiler # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler # +DA*, +DD* enable 64-bit mode for the HP compiler # -q* compiler args for the IBM compiler # -m*, -t[45]*, -txscale* architecture-specific flags for GCC # -F/path path to uninstalled frameworks, gcc on darwin # -p, -pg, --coverage, -fprofile-* profiling flags for GCC # -fstack-protector* stack protector flags for GCC # @file GCC response files # -tp=* Portland pgcc target processor selection # --sysroot=* for sysroot support # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization # -specs=* GCC specs files # -stdlib=* select c++ std lib with clang # -fsanitize=* Clang/GCC memory and address sanitizer -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*| \ -specs=*|-fsanitize=*) func_quote_for_eval "$arg" arg=$func_quote_for_eval_result func_append compile_command " $arg" func_append finalize_command " $arg" func_append compiler_flags " $arg" continue ;; -Z*) if test os2 = "`expr $host : '.*\(os2\)'`"; then # OS/2 uses -Zxxx to specify OS/2-specific options compiler_flags="$compiler_flags $arg" func_append compile_command " $arg" func_append finalize_command " $arg" case $arg in -Zlinker | -Zstack) prev=xcompiler ;; esac continue else # Otherwise treat like 'Some other compiler flag' below func_quote_for_eval "$arg" arg=$func_quote_for_eval_result fi ;; # Some other compiler flag. -* | +*) func_quote_for_eval "$arg" arg=$func_quote_for_eval_result ;; *.$objext) # A standard object. func_append objs " $arg" ;; *.lo) # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test none = "$pic_object" && test none = "$non_pic_object"; then func_fatal_error "cannot find name of object for '$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir=$func_dirname_result test none = "$pic_object" || { # Prepend the subdirectory the object is found in. pic_object=$xdir$pic_object if test dlfiles = "$prev"; then if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then func_append dlfiles " $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test dlprefiles = "$prev"; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg=$pic_object } # Non-PIC object. if test none != "$non_pic_object"; then # Prepend the subdirectory the object is found in. non_pic_object=$xdir$non_pic_object # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test none = "$pic_object"; then arg=$non_pic_object fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object=$pic_object func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir=$func_dirname_result func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "'$arg' is not a valid libtool object" fi fi ;; *.$libext) # An archive. func_append deplibs " $arg" func_append old_deplibs " $arg" continue ;; *.la) # A libtool-controlled library. func_resolve_sysroot "$arg" if test dlfiles = "$prev"; then # This library was specified with -dlopen. func_append dlfiles " $func_resolve_sysroot_result" prev= elif test dlprefiles = "$prev"; then # The library was specified with -dlpreopen. func_append dlprefiles " $func_resolve_sysroot_result" prev= else func_append deplibs " $func_resolve_sysroot_result" fi continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. func_quote_for_eval "$arg" arg=$func_quote_for_eval_result ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then func_append compile_command " $arg" func_append finalize_command " $arg" fi done # argument parsing loop test -n "$prev" && \ func_fatal_help "the '$prevarg' option requires an argument" if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" func_append compile_command " $arg" func_append finalize_command " $arg" fi oldlibs= # calculate the name of the file, without its directory func_basename "$output" outputname=$func_basename_result libobjs_save=$libobjs if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" # Definition is injected by LT_CONFIG during libtool generation. func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH" func_dirname "$output" "/" "" output_objdir=$func_dirname_result$objdir func_to_tool_file "$output_objdir/" tool_output_objdir=$func_to_tool_file_result # Create the object directory. func_mkdir_p "$output_objdir" # Determine the type of output case $output in "") func_fatal_help "you must specify an output file" ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; *.la) linkmode=lib ;; *) linkmode=prog ;; # Anything else should be a program. esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do if $opt_preserve_dup_deps; then case "$libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append libs " $deplib" done if test lib = "$linkmode"; then libs="$predeps $libs $compiler_lib_search_path $postdeps" # Compute libraries that are listed more than once in $predeps # $postdeps and mark them as special (i.e., whose duplicates are # not to be eliminated). pre_post_deps= if $opt_duplicate_compiler_generated_deps; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; esac func_append pre_post_deps " $pre_post_dep" done fi pre_post_deps= fi deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries notinst_path= # paths that contain not-installed libtool libraries case $linkmode in lib) passes="conv dlpreopen link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) func_fatal_help "libraries can '-dlopen' only libtool libraries: $file" ;; esac done ;; prog) compile_deplibs= finalize_deplibs= alldeplibs=false newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" ;; *) passes="conv" ;; esac for pass in $passes; do # The preopen pass in lib mode reverses $deplibs; put it back here # so that -L comes before libs that need it for instance... if test lib,link = "$linkmode,$pass"; then ## FIXME: Find the place where the list is rebuilt in the wrong ## order, and fix it there properly tmp_deplibs= for deplib in $deplibs; do tmp_deplibs="$deplib $tmp_deplibs" done deplibs=$tmp_deplibs fi if test lib,link = "$linkmode,$pass" || test prog,scan = "$linkmode,$pass"; then libs=$deplibs deplibs= fi if test prog = "$linkmode"; then case $pass in dlopen) libs=$dlfiles ;; dlpreopen) libs=$dlprefiles ;; link) libs="$deplibs %DEPLIBS%" test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ;; esac fi if test lib,dlpreopen = "$linkmode,$pass"; then # Collect and forward deplibs of preopened libtool libs for lib in $dlprefiles; do # Ignore non-libtool-libs dependency_libs= func_resolve_sysroot "$lib" case $lib in *.la) func_source "$func_resolve_sysroot_result" ;; esac # Collect preopened libtool deplibs, except any this library # has declared as weak libs for deplib in $dependency_libs; do func_basename "$deplib" deplib_base=$func_basename_result case " $weak_libs " in *" $deplib_base "*) ;; *) func_append deplibs " $deplib" ;; esac done done libs=$dlprefiles fi if test dlopen = "$pass"; then # Collect dlpreopened libraries save_deplibs=$deplibs deplibs= fi for deplib in $libs; do lib= found=false case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) if test prog,link = "$linkmode,$pass"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append compiler_flags " $deplib" if test lib = "$linkmode"; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi continue ;; -l*) if test lib != "$linkmode" && test prog != "$linkmode"; then func_warning "'-l' is ignored for archives/objects" continue fi func_stripname '-l' '' "$deplib" name=$func_stripname_result if test lib = "$linkmode"; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" fi for searchdir in $searchdirs; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library lib=$searchdir/lib$name$search_ext if test -f "$lib"; then if test .la = "$search_ext"; then found=: else found=false fi break 2 fi done done if $found; then # deplib is a libtool library # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, # We need to do some special things here, and not later. if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $deplib "*) if func_lalib_p "$lib"; then library_names= old_library= func_source "$lib" for l in $old_library $library_names; do ll=$l done if test "X$ll" = "X$old_library"; then # only static version available found=false func_dirname "$lib" "" "." ladir=$func_dirname_result lib=$ladir/$old_library if test prog,link = "$linkmode,$pass"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" fi continue fi fi ;; *) ;; esac fi else # deplib doesn't seem to be a libtool library if test prog,link = "$linkmode,$pass"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" fi continue fi ;; # -l *.ltframework) if test prog,link = "$linkmode,$pass"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" if test lib = "$linkmode"; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; esac fi fi continue ;; -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test conv = "$pass" && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; prog) if test conv = "$pass"; then deplibs="$deplib $deplibs" continue fi if test scan = "$pass"; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; *) func_warning "'-L' is ignored for archives/objects" ;; esac # linkmode continue ;; # -L -R*) if test link = "$pass"; then func_stripname '-R' '' "$deplib" func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; *) func_append xrpath " $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; *.la) func_resolve_sysroot "$deplib" lib=$func_resolve_sysroot_result ;; *.$libext) if test conv = "$pass"; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) # Linking convenience modules into shared libraries is allowed, # but linking other static libraries is non-portable. case " $dlpreconveniencelibs " in *" $deplib "*) ;; *) valid_a_lib=false case $deplibs_check_method in match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=: fi ;; pass_all) valid_a_lib=: ;; esac if $valid_a_lib; then echo $ECHO "*** Warning: Linking the shared library $output against the" $ECHO "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" else echo $ECHO "*** Warning: Trying to link with static lib archive $deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because the file extensions .$libext of this argument makes me believe" echo "*** that it is just a static archive that I should not use here." fi ;; esac continue ;; prog) if test link != "$pass"; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi continue ;; esac # linkmode ;; # *.$libext *.lo | *.$objext) if test conv = "$pass"; then deplibs="$deplib $deplibs" elif test prog = "$linkmode"; then if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then # If there is no dlopen support or we're linking statically, # we need to preload. func_append newdlprefiles " $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append newdlfiles " $deplib" fi fi continue ;; %DEPLIBS%) alldeplibs=: continue ;; esac # case $deplib $found || test -f "$lib" \ || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'" # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$lib" \ || func_fatal_error "'$lib' is not a valid libtool archive" func_dirname "$lib" "" "." ladir=$func_dirname_result dlname= dlopen= dlpreopen= libdir= library_names= old_library= inherited_linker_flags= # If the library was installed with an old release of libtool, # it will not redefine variables installed, or shouldnotlink installed=yes shouldnotlink=no avoidtemprpath= # Read the .la file func_source "$lib" # Convert "-framework foo" to "foo.ltframework" if test -n "$inherited_linker_flags"; then tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do case " $new_inherited_linker_flags " in *" $tmp_inherited_linker_flag "*) ;; *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; esac done fi dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` if test lib,link = "$linkmode,$pass" || test prog,scan = "$linkmode,$pass" || { test prog != "$linkmode" && test lib != "$linkmode"; }; then test -n "$dlopen" && func_append dlfiles " $dlopen" test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" fi if test conv = "$pass"; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then func_fatal_error "cannot find name of link library for '$lib'" fi # It is a libtool convenience library, so add in its objects. func_append convenience " $ladir/$objdir/$old_library" func_append old_convenience " $ladir/$objdir/$old_library" tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" if $opt_preserve_dup_deps; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done elif test prog != "$linkmode" && test lib != "$linkmode"; then func_fatal_error "'$lib' is not a convenience library" fi continue fi # $pass = conv # Get the name of the library we link against. linklib= if test -n "$old_library" && { test yes = "$prefer_static_libs" || test built,no = "$prefer_static_libs,$installed"; }; then linklib=$old_library else for l in $old_library $library_names; do linklib=$l done fi if test -z "$linklib"; then func_fatal_error "cannot find name of link library for '$lib'" fi # This library was specified with -dlopen. if test dlopen = "$pass"; then test -z "$libdir" \ && func_fatal_error "cannot -dlopen a convenience library: '$lib'" if test -z "$dlname" || test yes != "$dlopen_support" || test no = "$build_libtool_libs" then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. func_append dlprefiles " $lib $dependency_libs" else func_append newdlfiles " $lib" fi continue fi # $pass = dlopen # We need an absolute path. case $ladir in [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then func_warning "cannot determine absolute directory name of '$ladir'" func_warning "passing it literally to the linker, although it might fail" abs_ladir=$ladir fi ;; esac func_basename "$lib" laname=$func_basename_result # Find the relevant object directory and library name. if test yes = "$installed"; then if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then func_warning "library '$lib' was moved." dir=$ladir absdir=$abs_ladir libdir=$abs_ladir else dir=$lt_sysroot$libdir absdir=$lt_sysroot$libdir fi test yes = "$hardcode_automatic" && avoidtemprpath=yes else if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then dir=$ladir absdir=$abs_ladir # Remove this search path later func_append notinst_path " $abs_ladir" else dir=$ladir/$objdir absdir=$abs_ladir/$objdir # Remove this search path later func_append notinst_path " $abs_ladir" fi fi # $installed = yes func_stripname 'lib' '.la' "$laname" name=$func_stripname_result # This library was specified with -dlpreopen. if test dlpreopen = "$pass"; then if test -z "$libdir" && test prog = "$linkmode"; then func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'" fi case $host in # special handling for platforms with PE-DLLs. *cygwin* | *mingw* | *cegcc* ) # Linker will automatically link against shared library if both # static and shared are present. Therefore, ensure we extract # symbols from the import library if a shared library is present # (otherwise, the dlopen module name will be incorrect). We do # this by putting the import library name into $newdlprefiles. # We recover the dlopen module name by 'saving' the la file # name in a special purpose variable, and (later) extracting the # dlname from the la file. if test -n "$dlname"; then func_tr_sh "$dir/$linklib" eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" func_append newdlprefiles " $dir/$linklib" else func_append newdlprefiles " $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ func_append dlpreconveniencelibs " $dir/$old_library" fi ;; * ) # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then func_append newdlprefiles " $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ func_append dlpreconveniencelibs " $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then func_append newdlprefiles " $dir/$dlname" else func_append newdlprefiles " $dir/$linklib" fi ;; esac fi # $pass = dlpreopen if test -z "$libdir"; then # Link the convenience library if test lib = "$linkmode"; then deplibs="$dir/$old_library $deplibs" elif test prog,link = "$linkmode,$pass"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi if test prog = "$linkmode" && test link != "$pass"; then func_append newlib_search_path " $ladir" deplibs="$lib $deplibs" linkalldeplibs=false if test no != "$link_all_deplibs" || test -z "$library_names" || test no = "$build_libtool_libs"; then linkalldeplibs=: fi tmp_libs= for deplib in $dependency_libs; do case $deplib in -L*) func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; esac # Need to link against all dependency_libs? if $linkalldeplibs; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi if $opt_preserve_dup_deps; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done # for deplib continue fi # $linkmode = prog... if test prog,link = "$linkmode,$pass"; then if test -n "$library_names" && { { test no = "$prefer_static_libs" || test built,yes = "$prefer_static_libs,$installed"; } || test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then # Make sure the rpath contains only unique directories. case $temp_rpath: in *"$absdir:"*) ;; *) func_append temp_rpath "$absdir:" ;; esac fi # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) func_append compile_rpath " $absdir" ;; esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac ;; esac fi # $linkmode,$pass = prog,link... if $alldeplibs && { test pass_all = "$deplibs_check_method" || { test yes = "$build_libtool_libs" && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi fi link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs if test built = "$use_static_libs" && test yes = "$installed"; then use_static_libs=no fi if test -n "$library_names" && { test no = "$use_static_libs" || test -z "$old_library"; }; then case $host in *cygwin* | *mingw* | *cegcc* | *os2*) # No point in relinking DLLs because paths are not encoded func_append notinst_deplibs " $lib" need_relink=no ;; *) if test no = "$installed"; then func_append notinst_deplibs " $lib" need_relink=yes fi ;; esac # This is a shared library # Warn about portability, can't link against -module's on some # systems (darwin). Don't bleat about dlopened modules though! dlopenmodule= for dlpremoduletest in $dlprefiles; do if test "X$dlpremoduletest" = "X$lib"; then dlopenmodule=$dlpremoduletest break fi done if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then echo if test prog = "$linkmode"; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else $ECHO "*** Warning: Linking the shared library $output against the loadable module" fi $ECHO "*** $linklib is not portable!" fi if test lib = "$linkmode" && test yes = "$hardcode_into_libs"; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) func_append compile_rpath " $absdir" ;; esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac ;; esac fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names shift realname=$1 shift libname=`eval "\\$ECHO \"$libname_spec\""` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname=$dlname elif test -n "$soname_spec"; then # bleh windows case $host in *cygwin* | mingw* | *cegcc* | *os2*) func_arith $current - $age major=$func_arith_result versuffix=-$major ;; esac eval soname=\"$soname_spec\" else soname=$realname fi # Make a new name for the extract_expsyms_cmds to use soroot=$soname func_basename "$soroot" soname=$func_basename_result func_stripname 'lib' '.dll' "$soname" newlib=libimp-$func_stripname_result.a # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else func_verbose "extracting exported symbol list from '$soname'" func_execute_cmds "$extract_expsyms_cmds" 'exit $?' fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else func_verbose "generating import library for '$soname'" func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" if test prog = "$linkmode" || test relink != "$opt_mode"; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) if test no = "$hardcode_direct"; then add=$dir/$linklib case $host in *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;; *-*-sysv4*uw2*) add_dir=-L$dir ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir=-L$dir ;; *-*-darwin* ) # if the lib is a (non-dlopened) module then we cannot # link against it, someone is ignoring the earlier warnings if /usr/bin/file -L $add 2> /dev/null | $GREP ": [^:]* bundle" >/dev/null; then if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" if test -z "$old_library"; then echo echo "*** And there doesn't seem to be a static archive available" echo "*** The link will probably fail, sorry" else add=$dir/$old_library fi elif test -n "$old_library"; then add=$dir/$old_library fi fi esac elif test no = "$hardcode_minus_L"; then case $host in *-*-sunos*) add_shlibpath=$dir ;; esac add_dir=-L$dir add=-l$name elif test no = "$hardcode_shlibpath_var"; then add_shlibpath=$dir add=-l$name else lib_linked=no fi ;; relink) if test yes = "$hardcode_direct" && test no = "$hardcode_direct_absolute"; then add=$dir/$linklib elif test yes = "$hardcode_minus_L"; then add_dir=-L$absdir # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi add=-l$name elif test yes = "$hardcode_shlibpath_var"; then add_shlibpath=$dir add=-l$name else lib_linked=no fi ;; *) lib_linked=no ;; esac if test yes != "$lib_linked"; then func_fatal_configuration "unsupported hardcode properties" fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; *) func_append compile_shlibpath "$add_shlibpath:" ;; esac fi if test prog = "$linkmode"; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" if test yes != "$hardcode_direct" && test yes != "$hardcode_minus_L" && test yes = "$hardcode_shlibpath_var"; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac fi fi fi if test prog = "$linkmode" || test relink = "$opt_mode"; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. if test yes = "$hardcode_direct" && test no = "$hardcode_direct_absolute"; then add=$libdir/$linklib elif test yes = "$hardcode_minus_L"; then add_dir=-L$libdir add=-l$name elif test yes = "$hardcode_shlibpath_var"; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac add=-l$name elif test yes = "$hardcode_automatic"; then if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib"; then add=$inst_prefix_dir$libdir/$linklib else add=$libdir/$linklib fi else # We cannot seem to hardcode it, guess we'll fake it. add_dir=-L$libdir # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi add=-l$name fi if test prog = "$linkmode"; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" fi fi elif test prog = "$linkmode"; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test unsupported != "$hardcode_direct"; then test -n "$old_library" && linklib=$old_library compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi elif test yes = "$build_libtool_libs"; then # Not a shared library if test pass_all != "$deplibs_check_method"; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. echo $ECHO "*** Warning: This system cannot link to static lib archive $lib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." if test yes = "$module"; then echo "*** But as you try to build a module library, libtool will still create " echo "*** a static module, that should work as long as the dlopening application" echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using 'nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** 'nm' from GNU binutils and a full rebuild may help." fi if test no = "$build_old_libs"; then build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi else deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? if test lib = "$linkmode"; then if test -n "$dependency_libs" && { test yes != "$hardcode_into_libs" || test yes = "$build_old_libs" || test yes = "$link_static"; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in -R*) func_stripname '-R' '' "$libdir" temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; *) func_append xrpath " $temp_xrpath";; esac;; *) func_append temp_deplibs " $libdir";; esac done dependency_libs=$temp_deplibs fi func_append newlib_search_path " $absdir" # Link against this library test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" case $deplib in -L*) func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result";; *) func_resolve_sysroot "$deplib" ;; esac if $opt_preserve_dup_deps; then case "$tmp_libs " in *" $func_resolve_sysroot_result "*) func_append specialdeplibs " $func_resolve_sysroot_result" ;; esac fi func_append tmp_libs " $func_resolve_sysroot_result" done if test no != "$link_all_deplibs"; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do path= case $deplib in -L*) path=$deplib ;; *.la) func_resolve_sysroot "$deplib" deplib=$func_resolve_sysroot_result func_dirname "$deplib" "" "." dir=$func_dirname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then func_warning "cannot determine absolute directory name of '$dir'" absdir=$dir fi ;; esac if $GREP "^installed=no" $deplib > /dev/null; then case $host in *-*-darwin*) depdepl= eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names"; then for tmp in $deplibrary_names; do depdepl=$tmp done if test -f "$absdir/$objdir/$depdepl"; then depdepl=$absdir/$objdir/$depdepl darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` if test -z "$darwin_install_name"; then darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl" func_append linker_flags " -dylib_file $darwin_install_name:$depdepl" path= fi fi ;; *) path=-L$absdir/$objdir ;; esac else eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "'$deplib' is not a valid libtool archive" test "$absdir" != "$libdir" && \ func_warning "'$deplib' seems to be moved" path=-L$absdir fi ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs if test link = "$pass"; then if test prog = "$linkmode"; then compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi dependency_libs=$newdependency_libs if test dlpreopen = "$pass"; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi if test dlopen != "$pass"; then test conv = "$pass" || { # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; *) func_append lib_search_path " $dir" ;; esac done newlib_search_path= } if test prog,link = "$linkmode,$pass"; then vars="compile_deplibs finalize_deplibs" else vars=deplibs fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do # FIXME: Pedantically, this is the right thing to do, so # that some nasty dependency loop isn't accidentally # broken: #new_libs="$deplib $new_libs" # Pragmatically, this seems to cause very few problems in # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; -R*) ;; *) # And here is the reason: when a library appears more # than once as an explicit dependence of a library, or # is implicitly linked in more than once by the # compiler, it is considered special, and multiple # occurrences thereof are not removed. Compare this # with having the same library being listed as a # dependency of multiple other libraries: in this case, # we know (pedantically, we assume) the library does not # need to be listed more than once, so we keep only the # last copy. This is not always right, but it is rare # enough that we require users that really mean to play # such unportable linking tricks to link the library # using -Wl,-lname, so that libtool does not consider it # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$deplib $new_libs" ;; esac ;; esac ;; esac done tmp_libs= for deplib in $new_libs; do case $deplib in -L*) case " $tmp_libs " in *" $deplib "*) ;; *) func_append tmp_libs " $deplib" ;; esac ;; *) func_append tmp_libs " $deplib" ;; esac done eval $var=\"$tmp_libs\" done # for var fi # Add Sun CC postdeps if required: test CXX = "$tagname" && { case $host_os in linux*) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 func_suncc_cstd_abi if test no != "$suncc_use_cstd_abi"; then func_append postdeps ' -library=Cstd -library=Crun' fi ;; esac ;; solaris*) func_cc_basename "$CC" case $func_cc_basename_result in CC* | sunCC*) func_suncc_cstd_abi if test no != "$suncc_use_cstd_abi"; then func_append postdeps ' -library=Cstd -library=Crun' fi ;; esac ;; esac } # Last step: remove runtime libs from dependency_libs # (they stay in deplibs) tmp_libs= for i in $dependency_libs; do case " $predeps $postdeps $compiler_lib_search_path " in *" $i "*) i= ;; esac if test -n "$i"; then func_append tmp_libs " $i" fi done dependency_libs=$tmp_libs done # for pass if test prog = "$linkmode"; then dlfiles=$newdlfiles fi if test prog = "$linkmode" || test lib = "$linkmode"; then dlprefiles=$newdlprefiles fi case $linkmode in oldlib) if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then func_warning "'-dlopen' is ignored for archives" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "'-l' and '-L' are ignored for archives" ;; esac test -n "$rpath" && \ func_warning "'-rpath' is ignored for archives" test -n "$xrpath" && \ func_warning "'-R' is ignored for archives" test -n "$vinfo" && \ func_warning "'-version-info/-version-number' is ignored for archives" test -n "$release" && \ func_warning "'-release' is ignored for archives" test -n "$export_symbols$export_symbols_regex" && \ func_warning "'-export-symbols' is ignored for archives" # Now set the variables for building old libraries. build_libtool_libs=no oldlibs=$output func_append objs "$old_deplibs" ;; lib) # Make sure we only generate libraries of the form 'libNAME.la'. case $outputname in lib*) func_stripname 'lib' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) test no = "$module" \ && func_fatal_help "libtool library '$output' must begin with 'lib'" if test no != "$need_lib_prefix"; then # Add the "lib" prefix for modules if required func_stripname '' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else func_stripname '' '.la' "$outputname" libname=$func_stripname_result fi ;; esac if test -n "$objs"; then if test pass_all != "$deplibs_check_method"; then func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs" else echo $ECHO "*** Warning: Linking the shared library $output against the non-libtool" $ECHO "*** objects $objs is not portable!" func_append libobjs " $objs" fi fi test no = "$dlself" \ || func_warning "'-dlopen self' is ignored for libtool libraries" set dummy $rpath shift test 1 -lt "$#" \ && func_warning "ignoring multiple '-rpath's for a libtool library" install_libdir=$1 oldlibs= if test -z "$rpath"; then if test yes = "$build_libtool_libs"; then # Building a libtool convenience library. # Some compilers have problems with a '.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi test -n "$vinfo" && \ func_warning "'-version-info/-version-number' is ignored for convenience libraries" test -n "$release" && \ func_warning "'-release' is ignored for convenience libraries" else # Parse the version information argument. save_ifs=$IFS; IFS=: set dummy $vinfo 0 0 0 shift IFS=$save_ifs test -n "$7" && \ func_fatal_help "too many parameters to '-version-info'" # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts # to make the code below a bit more comprehensible case $vinfo_number in yes) number_major=$1 number_minor=$2 number_revision=$3 # # There are really only two kinds -- those that # use the current revision as the major version # and those that subtract age and use age as # a minor version. But, then there is irix # that has an extra 1 added just for fun # case $version_type in # correct linux to gnu/linux during the next big refactor darwin|freebsd-elf|linux|osf|windows|none) func_arith $number_major + $number_minor current=$func_arith_result age=$number_minor revision=$number_revision ;; freebsd-aout|qnx|sunos) current=$number_major revision=$number_minor age=0 ;; irix|nonstopux) func_arith $number_major + $number_minor current=$func_arith_result age=$number_minor revision=$number_minor lt_irix_increment=no ;; *) func_fatal_configuration "$modename: unknown library version type '$version_type'" ;; esac ;; no) current=$1 revision=$2 age=$3 ;; esac # Check that each of the things are valid numbers. case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "CURRENT '$current' must be a nonnegative integer" func_fatal_error "'$vinfo' is not valid version information" ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "REVISION '$revision' must be a nonnegative integer" func_fatal_error "'$vinfo' is not valid version information" ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "AGE '$age' must be a nonnegative integer" func_fatal_error "'$vinfo' is not valid version information" ;; esac if test "$age" -gt "$current"; then func_error "AGE '$age' is greater than the current interface number '$current'" func_fatal_error "'$vinfo' is not valid version information" fi # Calculate the version variables. major= versuffix= verstring= case $version_type in none) ;; darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header func_arith $current - $age major=.$func_arith_result versuffix=$major.$age.$revision # Darwin ld doesn't like 0 for these options... func_arith $current + 1 minor_current=$func_arith_result xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" # On Darwin other compilers case $CC in nagfor*) verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" ;; *) verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; esac ;; freebsd-aout) major=.$current versuffix=.$current.$revision ;; freebsd-elf) func_arith $current - $age major=.$func_arith_result versuffix=$major.$age.$revision ;; irix | nonstopux) if test no = "$lt_irix_increment"; then func_arith $current - $age else func_arith $current - $age + 1 fi major=$func_arith_result case $version_type in nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; esac verstring=$verstring_prefix$major.$revision # Add in all the interfaces that we are compatible with. loop=$revision while test 0 -ne "$loop"; do func_arith $revision - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring=$verstring_prefix$major.$iface:$verstring done # Before this point, $major must not contain '.'. major=.$major versuffix=$major.$revision ;; linux) # correct to gnu/linux during the next big refactor func_arith $current - $age major=.$func_arith_result versuffix=$major.$age.$revision ;; osf) func_arith $current - $age major=.$func_arith_result versuffix=.$current.$age.$revision verstring=$current.$age.$revision # Add in all the interfaces that we are compatible with. loop=$age while test 0 -ne "$loop"; do func_arith $current - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring=$verstring:$iface.0 done # Make executables depend on our current version. func_append verstring ":$current.0" ;; qnx) major=.$current versuffix=.$current ;; sco) major=.$current versuffix=.$current ;; sunos) major=.$current versuffix=.$current.$revision ;; windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 file systems. func_arith $current - $age major=$func_arith_result versuffix=-$major ;; *) func_fatal_configuration "unknown library version type '$version_type'" ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely verstring= ;; *) verstring=0.0 ;; esac if test no = "$need_version"; then versuffix= else versuffix=.0.0 fi fi # Remove version info from name if versioning should be avoided if test yes,no = "$avoid_version,$need_version"; then major= versuffix= verstring= fi # Check to see if the archive will have undefined symbols. if test yes = "$allow_undefined"; then if test unsupported = "$allow_undefined_flag"; then if test yes = "$build_old_libs"; then func_warning "undefined symbols not allowed in $host shared libraries; building static only" build_libtool_libs=no else func_fatal_error "can't build $host shared library unless -no-undefined is specified" fi fi else # Don't allow undefined symbols. allow_undefined_flag=$no_undefined_flag fi fi func_generate_dlsyms "$libname" "$libname" : func_append libobjs " $symfileobj" test " " = "$libobjs" && libobjs= if test relink != "$opt_mode"; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= tempremovelist=`$ECHO "$output_objdir/*"` for p in $tempremovelist; do case $p in *.$objext | *.gcno) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*) if test -n "$precious_files_regex"; then if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 then continue fi fi func_append removelist " $p" ;; *) ;; esac done test -n "$removelist" && \ func_show_eval "${RM}r \$removelist" fi # Now set the variables for building old libraries. if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then func_append oldlibs " $output_objdir/$libname.$libext" # Transform .lo files to .o files. oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do func_replace_sysroot "$libdir" func_append temp_xrpath " -R$func_replace_sysroot_result" case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac done if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened old_dlfiles=$dlfiles dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; *) func_append dlfiles " $lib" ;; esac done # Make sure dlprefiles contains only unique files old_dlprefiles=$dlprefiles dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; *) func_append dlprefiles " $lib" ;; esac done if test yes = "$build_libtool_libs"; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework func_append deplibs " System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work ;; *) # Add libc to deplibs on all other systems if necessary. if test yes = "$build_libtool_need_lc"; then func_append deplibs " -lc" fi ;; esac fi # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname release_save=$release versuffix_save=$versuffix major_save=$major # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? release= versuffix= major= newdeplibs= droppeddeps=no case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just # implementing what was already the behavior. newdeplibs=$deplibs ;; test_compile) # This code stresses the "libraries are programs" paradigm to its # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. $opt_dry_run || $RM conftest.c cat > conftest.c </dev/null` $nocaseglob else potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` fi for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null | $GREP " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? potlib=$potent_lib while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | $SED 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;; *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then func_append newdeplibs " $a_deplib" a_deplib= break 2 fi done done fi if test -n "$a_deplib"; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib"; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a file magic. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` for a_deplib in $deplibs; do case $a_deplib in -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $a_deplib "*) func_append newdeplibs " $a_deplib" a_deplib= ;; esac fi if test -n "$a_deplib"; then libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib=$potent_lib # see symlink-check above in file_magic test if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then func_append newdeplibs " $a_deplib" a_deplib= break 2 fi done done fi if test -n "$a_deplib"; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib"; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a regex pattern. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. func_append newdeplibs " $a_deplib" ;; esac done # Gone through all deplibs. ;; none | unknown | *) newdeplibs= tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` if test yes = "$allow_libtool_libs_with_static_runtimes"; then for i in $predeps $postdeps; do # can't use Xsed below, because $i might contain '/' tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"` done fi case $tmp_deplibs in *[!\ \ ]*) echo if test none = "$deplibs_check_method"; then echo "*** Warning: inter-library dependencies are not supported in this platform." else echo "*** Warning: inter-library dependencies are not known to be supported." fi echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes ;; esac ;; esac versuffix=$versuffix_save major=$major_save release=$release_save libname=$libname_save name=$name_save case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library with the System framework newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac if test yes = "$droppeddeps"; then if test yes = "$module"; then echo echo "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" echo "*** a static module, that should work as long as the dlopening" echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using 'nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** 'nm' from GNU binutils and a full rebuild may help." fi if test no = "$build_old_libs"; then oldlibs=$output_objdir/$libname.$libext build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi else echo "*** The inter-library dependencies that have been dropped here will be" echo "*** automatically added whenever a program is linked with this library" echo "*** or is declared to -dlopen it." if test no = "$allow_undefined"; then echo echo "*** Since this library must not contain undefined symbols," echo "*** because either the platform does not support them or" echo "*** it was explicitly requested with -no-undefined," echo "*** libtool will only create a static version of it." if test no = "$build_old_libs"; then oldlibs=$output_objdir/$libname.$libext build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi fi fi # Done checking deplibs! deplibs=$newdeplibs fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" case $host in *-*-darwin*) newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $deplibs " in *" -L$path/$objdir "*) func_append new_libs " -L$path/$objdir" ;; esac ;; esac done for deplib in $deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) func_append new_libs " $deplib" ;; esac ;; *) func_append new_libs " $deplib" ;; esac done deplibs=$new_libs # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= # Test again, we may have decided not to build it any more if test yes = "$build_libtool_libs"; then # Remove $wl instances when linking with ld. # FIXME: should test the right _cmds variable. case $archive_cmds in *\$LD\ *) wl= ;; esac if test yes = "$hardcode_into_libs"; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath=$finalize_rpath test relink = "$opt_mode" || rpath=$compile_rpath$rpath for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then func_replace_sysroot "$libdir" libdir=$func_replace_sysroot_result if test -z "$hardcode_libdirs"; then hardcode_libdirs=$libdir else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append dep_rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) func_append perm_rpath " $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir=$hardcode_libdirs eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do func_append rpath "$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi shlibpath=$finalize_shlibpath test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi # Get the real and link names of the library. eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names shift realname=$1 shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname=$realname fi if test -z "$dlname"; then dlname=$soname fi lib=$output_objdir/$realname linknames= for link do func_append linknames " $link" done # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` test "X$libobjs" = "X " && libobjs= delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" export_symbols=$output_objdir/$libname.uexp func_append delfiles " $export_symbols" fi orig_export_symbols= case $host_os in cygwin* | mingw* | cegcc*) if test -n "$export_symbols" && test -z "$export_symbols_regex"; then # exporting using user supplied symfile func_dll_def_p "$export_symbols" || { # and it's NOT already a .def file. Must figure out # which of the given symbols are data symbols and tag # them as such. So, trigger use of export_symbols_cmds. # export_symbols gets reassigned inside the "prepare # the list of exported symbols" if statement, so the # include_expsyms logic still works. orig_export_symbols=$export_symbols export_symbols= always_export_symbols=yes } fi ;; esac # Prepare the list of exported symbols if test -z "$export_symbols"; then if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then func_verbose "generating symbol list for '$libname.la'" export_symbols=$output_objdir/$libname.exp $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds save_ifs=$IFS; IFS='~' for cmd1 in $cmds; do IFS=$save_ifs # Take the normal branch if the nm_file_list_spec branch # doesn't work or if tool conversion is not needed. case $nm_file_list_spec~$to_tool_file_cmd in *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) try_normal_branch=yes eval cmd=\"$cmd1\" func_len " $cmd" len=$func_len_result ;; *) try_normal_branch=no ;; esac if test yes = "$try_normal_branch" \ && { test "$len" -lt "$max_cmd_len" \ || test "$max_cmd_len" -le -1; } then func_show_eval "$cmd" 'exit $?' skipped_export=false elif test -n "$nm_file_list_spec"; then func_basename "$output" output_la=$func_basename_result save_libobjs=$libobjs save_output=$output output=$output_objdir/$output_la.nm func_to_tool_file "$output" libobjs=$nm_file_list_spec$func_to_tool_file_result func_append delfiles " $output" func_verbose "creating $NM input file list: $output" for obj in $save_libobjs; do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" done > "$output" eval cmd=\"$cmd1\" func_show_eval "$cmd" 'exit $?' output=$save_output libobjs=$save_libobjs skipped_export=false else # The command line is too long to execute in one step. func_verbose "using reloadable object file for export list..." skipped_export=: # Break out early, otherwise skipped_export may be # set to false by a later but shorter cmd. break fi done IFS=$save_ifs if test -n "$export_symbols_regex" && test : != "$skipped_export"; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols=$export_symbols test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test : != "$skipped_export" && test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for '$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands, which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi tmp_deplibs= for test_deplib in $deplibs; do case " $convenience " in *" $test_deplib "*) ;; *) func_append tmp_deplibs " $test_deplib" ;; esac done deplibs=$tmp_deplibs if test -n "$convenience"; then if test -n "$whole_archive_flag_spec" && test yes = "$compiler_needs_object" && test -z "$libobjs"; then # extract the archives, so we have objects to list. # TODO: could optimize this to just extract one archive. whole_archive_flag_spec= fi if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= else gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $convenience func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi fi if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" func_append linker_flags " $flag" fi # Make a backup of the uninstalled library when relinking if test relink = "$opt_mode"; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi # Do each of the archive commands. if test yes = "$module" && test -n "$module_cmds"; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then eval test_cmds=\"$module_expsym_cmds\" cmds=$module_expsym_cmds else eval test_cmds=\"$module_cmds\" cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval test_cmds=\"$archive_expsym_cmds\" cmds=$archive_expsym_cmds else eval test_cmds=\"$archive_cmds\" cmds=$archive_cmds fi fi if test : != "$skipped_export" && func_len " $test_cmds" && len=$func_len_result && test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else # The command line is too long to link in one step, link piecewise # or, if using GNU ld and skipped_export is not :, use a linker # script. # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we # want to use save_libobjs as it was before # whole_archive_flag_spec was expanded, because we can't # assume the linker understands whole_archive_flag_spec. # This may have to be revisited, in case too many # convenience libraries get linked in and end up exceeding # the spec. if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then save_libobjs=$libobjs fi save_output=$output func_basename "$output" output_la=$func_basename_result # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= last_robj= k=1 if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then output=$output_objdir/$output_la.lnkscript func_verbose "creating GNU ld script: $output" echo 'INPUT (' > $output for obj in $save_libobjs do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" >> $output done echo ')' >> $output func_append delfiles " $output" func_to_tool_file "$output" output=$func_to_tool_file_result elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then output=$output_objdir/$output_la.lnk func_verbose "creating linker input file list: $output" : > $output set x $save_libobjs shift firstobj= if test yes = "$compiler_needs_object"; then firstobj="$1 " shift fi for obj do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" >> $output done func_append delfiles " $output" func_to_tool_file "$output" output=$firstobj\"$file_list_spec$func_to_tool_file_result\" else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." output=$output_objdir/$output_la-$k.$objext eval test_cmds=\"$reload_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 # Loop over the list of objects to be linked. for obj in $save_libobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result if test -z "$objlist" || test "$len" -lt "$max_cmd_len"; then func_append objlist " $obj" else # The command $test_cmds is almost too long, add a # command to the queue. if test 1 -eq "$k"; then # The first file doesn't have a previous command to add. reload_objs=$objlist eval concat_cmds=\"$reload_cmds\" else # All subsequent reloadable object files will link in # the last one created. reload_objs="$objlist $last_robj" eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" fi last_robj=$output_objdir/$output_la-$k.$objext func_arith $k + 1 k=$func_arith_result output=$output_objdir/$output_la-$k.$objext objlist=" $obj" func_len " $last_robj" func_arith $len0 + $func_len_result len=$func_arith_result fi done # Handle the remaining objects by creating one last # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ reload_objs="$objlist $last_robj" eval concat_cmds=\"\$concat_cmds$reload_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi func_append delfiles " $output" else output= fi ${skipped_export-false} && { func_verbose "generating symbol list for '$libname.la'" export_symbols=$output_objdir/$libname.exp $opt_dry_run || $RM $export_symbols libobjs=$output # Append the command to create the export file. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi } test -n "$save_libobjs" && func_verbose "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. save_ifs=$IFS; IFS='~' for cmd in $concat_cmds; do IFS=$save_ifs $opt_quiet || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test relink = "$opt_mode"; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS=$save_ifs if test -n "$export_symbols_regex" && ${skipped_export-false}; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi ${skipped_export-false} && { if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols=$export_symbols test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for '$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands, which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter func_append delfiles " $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi } libobjs=$output # Restore the value of output. output=$save_output if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. # Do each of the archive commands. if test yes = "$module" && test -n "$module_cmds"; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then cmds=$module_expsym_cmds else cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then cmds=$archive_expsym_cmds else cmds=$archive_cmds fi fi fi if test -n "$delfiles"; then # Append the command to remove temporary files to $cmds. eval cmds=\"\$cmds~\$RM $delfiles\" fi # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $dlprefiles func_append libobjs " $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi save_ifs=$IFS; IFS='~' for cmd in $cmds; do IFS=$sp$nl eval cmd=\"$cmd\" IFS=$save_ifs $opt_quiet || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test relink = "$opt_mode"; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS=$save_ifs # Restore the uninstalled library and exit if test relink = "$opt_mode"; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then if test -z "$whole_archive_flag_spec"; then func_show_eval '${RM}r "$gentop"' fi fi exit $EXIT_SUCCESS fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' fi done # If -module or -export-dynamic was specified, set the dlname. if test yes = "$module" || test yes = "$export_dynamic"; then # On all known operating systems, these are identical. dlname=$soname fi fi ;; obj) if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then func_warning "'-dlopen' is ignored for objects" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "'-l' and '-L' are ignored for objects" ;; esac test -n "$rpath" && \ func_warning "'-rpath' is ignored for objects" test -n "$xrpath" && \ func_warning "'-R' is ignored for objects" test -n "$vinfo" && \ func_warning "'-version-info' is ignored for objects" test -n "$release" && \ func_warning "'-release' is ignored for objects" case $output in *.lo) test -n "$objs$old_deplibs" && \ func_fatal_error "cannot build library object '$output' from non-libtool objects" libobj=$output func_lo2o "$libobj" obj=$func_lo2o_result ;; *) libobj= obj=$output ;; esac # Delete the old objects. $opt_dry_run || $RM $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create # different ones for PIC/non-PIC, this we'll have to duplicate # the extraction. reload_conv_objs= gentop= # if reload_cmds runs $LD directly, get rid of -Wl from # whole_archive_flag_spec and hope we can get by with turning comma # into space. case $reload_cmds in *\$LD[\ \$]*) wl= ;; esac if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags else gentop=$output_objdir/${obj}x func_append generated " $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi # If we're not building shared, we need to use non_pic_objs test yes = "$build_libtool_libs" || libobjs=$non_pic_objects # Create the old-style object. reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs output=$obj func_execute_cmds "$reload_cmds" 'exit $?' # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS fi test yes = "$build_libtool_libs" || { if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS } if test -n "$pic_flag" || test default != "$pic_mode"; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output=$libobj func_execute_cmds "$reload_cmds" 'exit $?' fi if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS ;; prog) case $host in *cygwin*) func_stripname '' '.exe' "$output" output=$func_stripname_result.exe;; esac test -n "$vinfo" && \ func_warning "'-version-info' is ignored for programs" test -n "$release" && \ func_warning "'-release' is ignored for programs" $preload \ && test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \ && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support." case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac case $host in *-*-darwin*) # Don't allow lazy linking, it breaks C++ global constructors # But is supposedly fixed on 10.4 or later (yay!). if test CXX = "$tagname"; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) func_append compile_command " $wl-bind_at_load" func_append finalize_command " $wl-bind_at_load" ;; esac fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $compile_deplibs " in *" -L$path/$objdir "*) func_append new_libs " -L$path/$objdir" ;; esac ;; esac done for deplib in $compile_deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) func_append new_libs " $deplib" ;; esac ;; *) func_append new_libs " $deplib" ;; esac done compile_deplibs=$new_libs func_append compile_command " $compile_deplibs" func_append finalize_command " $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; *) func_append finalize_rpath " $libdir" ;; esac done fi # Now hardcode the library paths rpath= hardcode_libdirs= for libdir in $compile_rpath $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs=$libdir else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) func_append perm_rpath " $libdir" ;; esac fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; *) func_append dllsearchpath ":$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) func_append dllsearchpath ":$testbindir";; esac ;; esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir=$hardcode_libdirs eval rpath=\" $hardcode_libdir_flag_spec\" fi compile_rpath=$rpath rpath= hardcode_libdirs= for libdir in $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs=$libdir else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; *) func_append finalize_perm_rpath " $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir=$hardcode_libdirs eval rpath=\" $hardcode_libdir_flag_spec\" fi finalize_rpath=$rpath if test -n "$libobjs" && test yes = "$build_old_libs"; then # Transform all the library objects into standard objects. compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` fi func_generate_dlsyms "$outputname" "@PROGRAM@" false # template prelinking step if test -n "$prelink_cmds"; then func_execute_cmds "$prelink_cmds" 'exit $?' fi wrappers_required=: case $host in *cegcc* | *mingw32ce*) # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. wrappers_required=false ;; *cygwin* | *mingw* ) test yes = "$build_libtool_libs" || wrappers_required=false ;; *) if test no = "$need_relink" || test yes != "$build_libtool_libs"; then wrappers_required=false fi ;; esac $wrappers_required || { # Replace the output file specification. compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` link_command=$compile_command$compile_rpath # We have no uninstalled library dependencies, so finalize right now. exit_status=0 func_show_eval "$link_command" 'exit_status=$?' if test -n "$postlink_cmds"; then func_to_tool_file "$output" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi # Delete the generated files. if test -f "$output_objdir/${outputname}S.$objext"; then func_show_eval '$RM "$output_objdir/${outputname}S.$objext"' fi exit $exit_status } if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi compile_var= finalize_var= if test -n "$runpath_var"; then if test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do func_append rpath "$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi if test -n "$finalize_perm_rpath"; then # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do func_append rpath "$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi fi if test yes = "$no_install"; then # We don't need to create a wrapper script. link_command=$compile_var$compile_command$compile_rpath # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $opt_dry_run || $RM $output # Link the executable and exit func_show_eval "$link_command" 'exit $?' if test -n "$postlink_cmds"; then func_to_tool_file "$output" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi exit $EXIT_SUCCESS fi case $hardcode_action,$fast_install in relink,*) # Fast installation is not supported link_command=$compile_var$compile_command$compile_rpath relink_command=$finalize_var$finalize_command$finalize_rpath func_warning "this platform does not like uninstalled shared libraries" func_warning "'$output' will be relinked during installation" ;; *,yes) link_command=$finalize_var$compile_command$finalize_rpath relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` ;; *,no) link_command=$compile_var$compile_command$compile_rpath relink_command=$finalize_var$finalize_command$finalize_rpath ;; *,needless) link_command=$finalize_var$compile_command$finalize_rpath relink_command= ;; esac # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname func_show_eval "$link_command" 'exit $?' if test -n "$postlink_cmds"; then func_to_tool_file "$output_objdir/$outputname" postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` func_execute_cmds "$postlink_cmds" 'exit $?' fi # Now create the wrapper script. func_verbose "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` fi # Only actually do things if not in dry run mode. $opt_dry_run || { # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in *.exe) func_stripname '' '.exe' "$output" output=$func_stripname_result ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe func_stripname '' '.exe' "$outputname" outputname=$func_stripname_result ;; *) exeext= ;; esac case $host in *cygwin* | *mingw* ) func_dirname_and_basename "$output" "" "." output_name=$func_basename_result output_path=$func_dirname_result cwrappersource=$output_path/$objdir/lt-$output_name.c cwrapper=$output_path/$output_name.exe $RM $cwrappersource $cwrapper trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 func_emit_cwrapperexe_src > $cwrappersource # The wrapper executable is built using the $host compiler, # because it contains $host paths and files. If cross- # compiling, it, like the target executable, must be # executed on the $host or under an emulation environment. $opt_dry_run || { $LTCC $LTCFLAGS -o $cwrapper $cwrappersource $STRIP $cwrapper } # Now, create the wrapper script for func_source use: func_ltwrapper_scriptname $cwrapper $RM $func_ltwrapper_scriptname_result trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 $opt_dry_run || { # note: this script will not be executed, so do not chmod. if test "x$build" = "x$host"; then $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result else func_emit_wrapper no > $func_ltwrapper_scriptname_result fi } ;; * ) $RM $output trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 func_emit_wrapper no > $output chmod +x $output ;; esac } exit $EXIT_SUCCESS ;; esac # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do case $build_libtool_libs in convenience) oldobjs="$libobjs_save $symfileobj" addlibs=$convenience build_libtool_libs=no ;; module) oldobjs=$libobjs_save addlibs=$old_convenience build_libtool_libs=no ;; *) oldobjs="$old_deplibs $non_pic_objects" $preload && test -f "$symfileobj" \ && func_append oldobjs " $symfileobj" addlibs=$old_convenience ;; esac if test -n "$addlibs"; then gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $addlibs func_append oldobjs " $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then cmds=$old_archive_from_new_cmds else # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $dlprefiles func_append oldobjs " $func_extract_archives_result" fi # POSIX demands no paths to be encoded in archives. We have # to avoid creating archives with duplicate basenames if we # might have to extract them afterwards, e.g., when creating a # static archive out of a convenience library, or when linking # the entirety of a libtool archive into another (currently # not supported by libtool). if (for obj in $oldobjs do func_basename "$obj" $ECHO "$func_basename_result" done | sort | sort -uc >/dev/null 2>&1); then : else echo "copying selected object files to avoid basename conflicts..." gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs oldobjs= counter=1 for obj in $save_oldobjs do func_basename "$obj" objbase=$func_basename_result case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) while :; do # Make sure we don't pick an alternate name that also # overlaps. newobj=lt$counter-$objbase func_arith $counter + 1 counter=$func_arith_result case " $oldobjs " in *[\ /]"$newobj "*) ;; *) if test ! -f "$gentop/$newobj"; then break; fi ;; esac done func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" func_append oldobjs " $gentop/$newobj" ;; *) func_append oldobjs " $obj" ;; esac done fi func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 tool_oldlib=$func_to_tool_file_result eval cmds=\"$old_archive_cmds\" func_len " $cmds" len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds elif test -n "$archiver_list_spec"; then func_verbose "using command file archive linking..." for obj in $oldobjs do func_to_tool_file "$obj" $ECHO "$func_to_tool_file_result" done > $output_objdir/$libname.libcmd func_to_tool_file "$output_objdir/$libname.libcmd" oldobjs=" $archiver_list_spec$func_to_tool_file_result" cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts func_verbose "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs oldobjs= # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do last_oldobj=$obj done eval test_cmds=\"$old_archive_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 for obj in $save_oldobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result func_append objlist " $obj" if test "$len" -lt "$max_cmd_len"; then : else # the above command should be used before it gets too long oldobjs=$objlist if test "$obj" = "$last_oldobj"; then RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\$concat_cmds$old_archive_cmds\" objlist= len=$len0 fi done RANLIB=$save_RANLIB oldobjs=$objlist if test -z "$oldobjs"; then eval cmds=\"\$concat_cmds\" else eval cmds=\"\$concat_cmds~\$old_archive_cmds\" fi fi fi func_execute_cmds "$cmds" 'exit $?' done test -n "$generated" && \ func_show_eval "${RM}r$generated" # Now create the libtool archive. case $output in *.la) old_library= test yes = "$build_old_libs" && old_library=$libname.$libext func_verbose "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` if test yes = "$hardcode_automatic"; then relink_command= fi # Only create the output if not a dry run. $opt_dry_run || { for installed in no yes; do if test yes = "$installed"; then if test -z "$install_libdir"; then break fi output=$output_objdir/${outputname}i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) func_basename "$deplib" name=$func_basename_result func_resolve_sysroot "$deplib" eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` test -z "$libdir" && \ func_fatal_error "'$deplib' is not a valid libtool archive" func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" ;; -L*) func_stripname -L '' "$deplib" func_replace_sysroot "$func_stripname_result" func_append newdependency_libs " -L$func_replace_sysroot_result" ;; -R*) func_stripname -R '' "$deplib" func_replace_sysroot "$func_stripname_result" func_append newdependency_libs " -R$func_replace_sysroot_result" ;; *) func_append newdependency_libs " $deplib" ;; esac done dependency_libs=$newdependency_libs newdlfiles= for lib in $dlfiles; do case $lib in *.la) func_basename "$lib" name=$func_basename_result eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "'$lib' is not a valid libtool archive" func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" ;; *) func_append newdlfiles " $lib" ;; esac done dlfiles=$newdlfiles newdlprefiles= for lib in $dlprefiles; do case $lib in *.la) # Only pass preopened files to the pseudo-archive (for # eventual linking with the app. that links it) if we # didn't already link the preopened objects directly into # the library: func_basename "$lib" name=$func_basename_result eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "'$lib' is not a valid libtool archive" func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" ;; esac done dlprefiles=$newdlprefiles else newdlfiles= for lib in $dlfiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlfiles " $abs" done dlfiles=$newdlfiles newdlprefiles= for lib in $dlprefiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlprefiles " $abs" done dlprefiles=$newdlprefiles fi $RM $output # place dlname in correct position for cygwin # In fact, it would be nice if we could use this code for all target # systems that can't hard-code library paths into their executables # and that have no shared library path variable independent of PATH, # but it turns out we can't easily determine that from inspecting # libtool variables, so we have to hard-code the OSs to which it # applies here; at the moment, that means platforms that use the PE # object format with DLL files. See the long comment at the top of # tests/bindir.at for full details. tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) # If a -bindir argument was supplied, place the dll there. if test -n "$bindir"; then func_relative_path "$install_libdir" "$bindir" tdlname=$func_relative_path_result/$dlname else # Otherwise fall back on heuristic. tdlname=../bin/$dlname fi ;; esac $ECHO > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM (GNU $PACKAGE) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='$tdlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Linker flags that cannot go in dependency_libs. inherited_linker_flags='$new_inherited_linker_flags' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Names of additional weak libraries provided by this library weak_library_names='$weak_libs' # Version information for $libname. current=$current age=$age revision=$revision # Is this an already installed library? installed=$installed # Should we warn about portability when linking against -modules? shouldnotlink=$module # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test no,yes = "$installed,$need_relink"; then $ECHO >> $output "\ relink_command=\"$relink_command\"" fi done } # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ;; esac exit $EXIT_SUCCESS } if test link = "$opt_mode" || test relink = "$opt_mode"; then func_mode_link ${1+"$@"} fi # func_mode_uninstall arg... func_mode_uninstall () { $debug_cmd RM=$nonopt files= rmforce=false exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic=$magic for arg do case $arg in -f) func_append RM " $arg"; rmforce=: ;; -*) func_append RM " $arg" ;; *) func_append files " $arg" ;; esac done test -z "$RM" && \ func_fatal_help "you must specify an RM program" rmdirs= for file in $files; do func_dirname "$file" "" "." dir=$func_dirname_result if test . = "$dir"; then odir=$objdir else odir=$dir/$objdir fi func_basename "$file" name=$func_basename_result test uninstall = "$opt_mode" && odir=$dir # Remember odir for removal later, being careful to avoid duplicates if test clean = "$opt_mode"; then case " $rmdirs " in *" $odir "*) ;; *) func_append rmdirs " $odir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. if { test -L "$file"; } >/dev/null 2>&1 || { test -h "$file"; } >/dev/null 2>&1 || test -f "$file"; then : elif test -d "$file"; then exit_status=1 continue elif $rmforce; then continue fi rmfiles=$file case $name in *.la) # Possibly a libtool archive, so verify it. if func_lalib_p "$file"; then func_source $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do func_append rmfiles " $odir/$n" done test -n "$old_library" && func_append rmfiles " $odir/$old_library" case $opt_mode in clean) case " $library_names " in *" $dlname "*) ;; *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; esac test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. ;; esac fi ;; *.lo) # Possibly a libtool object, so verify it. if func_lalib_p "$file"; then # Read the .lo file func_source $dir/$name # Add PIC object to the list of files to remove. if test -n "$pic_object" && test none != "$pic_object"; then func_append rmfiles " $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" && test none != "$non_pic_object"; then func_append rmfiles " $dir/$non_pic_object" fi fi ;; *) if test clean = "$opt_mode"; then noexename=$name case $file in *.exe) func_stripname '' '.exe' "$file" file=$func_stripname_result func_stripname '' '.exe' "$name" noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe func_append rmfiles " $file" ;; esac # Do a test to see if this is a libtool program. if func_ltwrapper_p "$file"; then if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" relink_command= func_source $func_ltwrapper_scriptname_result func_append rmfiles " $func_ltwrapper_scriptname_result" else relink_command= func_source $dir/$noexename fi # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles func_append rmfiles " $odir/$name $odir/${name}S.$objext" if test yes = "$fast_install" && test -n "$relink_command"; then func_append rmfiles " $odir/lt-$name" fi if test "X$noexename" != "X$name"; then func_append rmfiles " $odir/lt-$noexename.c" fi fi fi ;; esac func_show_eval "$RM $rmfiles" 'exit_status=1' done # Try to remove the $objdir's in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then func_show_eval "rmdir $dir >/dev/null 2>&1" fi done exit $exit_status } if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then func_mode_uninstall ${1+"$@"} fi test -z "$opt_mode" && { help=$generic_help func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ func_fatal_help "invalid operation mode '$opt_mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" exit $EXIT_FAILURE fi exit $exit_status # The TAGs below are defined such that we never get into a situation # where we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support # them. This is particularly important on AIX, because we don't # support having both static and shared libraries enabled at the same # time on that platform, so we default to a shared-only configuration. # If a disable-shared tag is given, we'll fallback to a static-only # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared build_libtool_libs=no build_old_libs=yes # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: lightdm-gtk-greeter-2.0.5/data/0000775000175000017500000000000013253545066020302 5ustar00bluesabrebluesabre00000000000000lightdm-gtk-greeter-2.0.5/data/Makefile.am0000664000175000017500000000154513252333325022333 0ustar00bluesabrebluesabre00000000000000# # Copyright (C) 2010 - 2011, Robert Ancell # Copyright (C) 2012 - 2013, Lionel Le Folgoc # Copyright (C) 2014, Sean Davis # Copyright (C) 2014, Simon Steinbeiß # # This program is free software: you can redistribute it and/or modify it under # the terms of the GNU General Public License as published by the Free Software # Foundation, either version 3 of the License, or (at your option) any later # version. See http://www.gnu.org/copyleft/gpl.html the full text of the # license. # SUBDIRS = badges xgreetersdir = $(datadir)/xgreeters dist_xgreeters_DATA = lightdm-gtk-greeter.desktop docdir = $(datadir)/doc/lightdm-gtk-greeter dist_doc_DATA = sample-lightdm-gtk-greeter.css configdir = $(sysconfdir)/lightdm dist_config_DATA = lightdm-gtk-greeter.conf lightdm-gtk-greeter-2.0.5/data/lightdm-gtk-greeter.conf0000664000175000017500000000563213252337040025013 0ustar00bluesabrebluesabre00000000000000# LightDM GTK+ Configuration # Available configuration options listed below. # # Appearance: # theme-name = GTK+ theme to use # icon-theme-name = Icon theme to use # cursor-theme-name = Cursor theme to use # cursor-theme-size = Cursor size to use # background = Background file to use, either an image path or a color (e.g. #772953) # user-background = false|true ("true" by default) Display user background (if available) # transition-duration = Length of time (in milliseconds) to transition between background images ("500" by default) # transition-type = ease-in-out|linear|none ("ease-in-out" by default) # # Fonts: # font-name = Font to use # xft-antialias = false|true Whether to antialias Xft fonts # xft-dpi = Resolution for Xft in dots per inch (e.g. 96) # xft-hintstyle = none|slight|medium|hintfull What degree of hinting to use # xft-rgba = none|rgb|bgr|vrgb|vbgr Type of subpixel antialiasing # # Login window: # active-monitor = Monitor to display greeter window (name or number). Use #cursor value to display greeter at monitor with cursor. Can be a semicolon separated list # position = x y ("50% 50%" by default) Login window position # default-user-image = Image used as default user icon, path or #icon-name # hide-user-image = false|true ("false" by default) # # Panel: # panel-position = top|bottom ("top" by default) # clock-format = strftime-format string, e.g. %H:%M # indicators = semi-colon ";" separated list of allowed indicator modules. Built-in indicators include "~a11y", "~language", "~session", "~power", "~clock", "~host", "~spacer". Unity indicators can be represented by short name (e.g. "sound", "power"), service file name, or absolute path # # Accessibility: # a11y-states = states of accessibility features: "name" - save state on exit, "-name" - disabled at start (default value for unlisted), "+name" - enabled at start. Allowed names: contrast, font, keyboard, reader. # keyboard = command to launch on-screen keyboard (e.g. "onboard") # keyboard-position = x y[;width height] ("50%,center -0;50% 25%" by default) Works only for "onboard" # reader = command to launch screen reader (e.g. "orca") # at-spi-enabled = false|true ("true" by default) Enables accessibility at-spi-command if the greeter is built with it enabled # # Security: # allow-debugging = false|true ("false" by default) # screensaver-timeout = Timeout (in seconds) until the screen blanks when the greeter is called as lockscreen # # Template for per-monitor configuration: # [monitor: name] # background = overrides default value # user-background = overrides default value # laptop = false|true ("false" by default) Marks monitor as laptop display # transition-duration = overrides default value # [greeter] #background= #user-background= #theme-name= #icon-theme-name= #font-name= #xft-antialias= #xft-dpi= #xft-hintstyle= #xft-rgba= #indicators= #clock-format= #keyboard= #reader= #position= #screensaver-timeout= lightdm-gtk-greeter-2.0.5/data/lightdm-gtk-greeter.desktop0000664000175000017500000000027313243241724025536 0ustar00bluesabrebluesabre00000000000000[Desktop Entry] Name=LightDM GTK+ Greeter Comment=This runs the GTK+ greeter, it should only be run from LightDM Exec=lightdm-gtk-greeter Type=Application X-Ubuntu-Gettext-Domain=lightdm lightdm-gtk-greeter-2.0.5/data/badges/0000775000175000017500000000000013253545066021527 5ustar00bluesabrebluesabre00000000000000lightdm-gtk-greeter-2.0.5/data/badges/gnome-flashback-compiz_badge-symbolic.svg0000664000175000017500000000327613243241724031532 0ustar00bluesabrebluesabre00000000000000 image/svg+xml Gnome Symbolic Icon Theme Gnome Symbolic Icon Theme lightdm-gtk-greeter-2.0.5/data/badges/ubuntustudio_badge-symbolic.svg0000664000175000017500000001406013243241724027755 0ustar00bluesabrebluesabre00000000000000 Ubuntu Studio v3 image/svg+xml Ubuntu Studio v3 Cory Kontros New Ubuntu Studio logo based on the Ubuntu logo 1st used in Ubuntu 10.04. August 8th 2010 lightdm-gtk-greeter-2.0.5/data/badges/lubuntu_badge-symbolic.svg0000664000175000017500000001116213243241724026701 0ustar00bluesabrebluesabre00000000000000 image/svg+xml lightdm-gtk-greeter-2.0.5/data/badges/Makefile.am0000664000175000017500000000162013252333534023554 0ustar00bluesabrebluesabre00000000000000# # Copyright (C) 2014, Simon Steinbeiß # # This program is free software: you can redistribute it and/or modify it under # the terms of the GNU General Public License as published by the Free Software # Foundation, either version 3 of the License, or (at your option) any later # version. See http://www.gnu.org/copyleft/gpl.html the full text of the # license. # EXTRA_DIST = \ $(Data_DATA) Datadir = $(datadir)/icons/hicolor/scalable/places Data_DATA = \ $(wildcard *.svg) gtk_update_icon_cache = gtk-update-icon-cache -f -t $(datadir)/icons/hicolor install-data-hook: update-icon-cache uninstall-hook: update-icon-cache update-icon-cache: @-if test -z "$(DESTDIR)"; then \ echo "Updating Gtk icon cache."; \ $(gtk_update_icon_cache); \ else \ echo "*** Icon cache not updated. After (un)install, run this:"; \ echo "*** $(gtk_update_icon_cache)"; \ fi lightdm-gtk-greeter-2.0.5/data/badges/wmaker-common_badge-symbolic.svg0000664000175000017500000000152413243241724027760 0ustar00bluesabrebluesabre00000000000000 image/svg+xml lightdm-gtk-greeter-2.0.5/data/badges/gnome-fallback-compiz_badge-symbolic.svg0000664000175000017500000000327613243241724031353 0ustar00bluesabrebluesabre00000000000000 image/svg+xml Gnome Symbolic Icon Theme Gnome Symbolic Icon Theme lightdm-gtk-greeter-2.0.5/data/badges/kde_badge-symbolic.svg0000664000175000017500000000663313243241724025755 0ustar00bluesabrebluesabre00000000000000 image/svg+xmllightdm-gtk-greeter-2.0.5/data/badges/gnome_badge-symbolic.svg0000664000175000017500000000327613243241724026317 0ustar00bluesabrebluesabre00000000000000 image/svg+xml Gnome Symbolic Icon Theme Gnome Symbolic Icon Theme lightdm-gtk-greeter-2.0.5/data/badges/gnome-flashback_badge-symbolic.svg0000664000175000017500000000327613243241724030233 0ustar00bluesabrebluesabre00000000000000 image/svg+xml Gnome Symbolic Icon Theme Gnome Symbolic Icon Theme lightdm-gtk-greeter-2.0.5/data/badges/gnome-classic_badge-symbolic.svg0000664000175000017500000000327613243241724027736 0ustar00bluesabrebluesabre00000000000000 image/svg+xml Gnome Symbolic Icon Theme Gnome Symbolic Icon Theme lightdm-gtk-greeter-2.0.5/data/badges/xterm_badge-symbolic.svg0000664000175000017500000000307713243241724026350 0ustar00bluesabrebluesabre00000000000000 image/svg+xml Gnome Symbolic Icon Theme Gnome Symbolic Icon Theme lightdm-gtk-greeter-2.0.5/data/badges/budgie-desktop_badge-symbolic.svg0000664000175000017500000000263313243241724030114 0ustar00bluesabrebluesabre00000000000000 Budgie symbolic icon image/svg+xml Budgie symbolic icon Yuri Henrique HEXcube Symbolic icon for Budgie desktop environment lightdm-gtk-greeter-2.0.5/data/badges/mate_badge-symbolic.svg0000664000175000017500000000354113243241724026133 0ustar00bluesabrebluesabre00000000000000 image/svg+xml lightdm-gtk-greeter-2.0.5/data/badges/xubuntu_badge-symbolic.svg0000664000175000017500000001215613243241724026721 0ustar00bluesabrebluesabre00000000000000 image/svg+xml lightdm-gtk-greeter-2.0.5/data/badges/kde-plasma_badge-symbolic.svg0000664000175000017500000000663313243241724027230 0ustar00bluesabrebluesabre00000000000000 image/svg+xmllightdm-gtk-greeter-2.0.5/data/badges/Makefile.in0000664000175000017500000004144213253544551023577 0ustar00bluesabrebluesabre00000000000000# Makefile.in generated by automake 1.15.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2017 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # # Copyright (C) 2014, Simon Steinbeiß # # This program is free software: you can redistribute it and/or modify it under # the terms of the GNU General Public License as published by the Free Software # Foundation, either version 3 of the License, or (at your option) any later # version. See http://www.gnu.org/copyleft/gpl.html the full text of the # license. # VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = data/badges ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ $(top_srcdir)/m4/introspection.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(Datadir)" DATA = $(Data_DATA) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMODULE_CFLAGS = @GMODULE_CFLAGS@ GMODULE_LIBS = @GMODULE_LIBS@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ HAVE_EXO_CSOURCE = @HAVE_EXO_CSOURCE@ INDICATORDIR = @INDICATORDIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBIDO_CFLAGS = @LIBIDO_CFLAGS@ LIBIDO_LIBS = @LIBIDO_LIBS@ LIBINDICATOR_CFLAGS = @LIBINDICATOR_CFLAGS@ LIBINDICATOR_LIBS = @LIBINDICATOR_LIBS@ LIBINTL = @LIBINTL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIBX11_CFLAGS = @LIBX11_CFLAGS@ LIBX11_LIBS = @LIBX11_LIBS@ LIBXKLAVIER_CFLAGS = @LIBXKLAVIER_CFLAGS@ LIBXKLAVIER_LIBS = @LIBXKLAVIER_LIBS@ LIGHTDMGOBJECT_CFLAGS = @LIGHTDMGOBJECT_CFLAGS@ LIGHTDMGOBJECT_LIBS = @LIGHTDMGOBJECT_LIBS@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POSUB = @POSUB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ UNITY_INDICATORDIR = @UNITY_INDICATORDIR@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ EXTRA_DIST = \ $(Data_DATA) Datadir = $(datadir)/icons/hicolor/scalable/places Data_DATA = \ $(wildcard *.svg) gtk_update_icon_cache = gtk-update-icon-cache -f -t $(datadir)/icons/hicolor all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/badges/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/badges/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-DataDATA: $(Data_DATA) @$(NORMAL_INSTALL) @list='$(Data_DATA)'; test -n "$(Datadir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(Datadir)'"; \ $(MKDIR_P) "$(DESTDIR)$(Datadir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(Datadir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(Datadir)" || exit $$?; \ done uninstall-DataDATA: @$(NORMAL_UNINSTALL) @list='$(Data_DATA)'; test -n "$(Datadir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(Datadir)'; $(am__uninstall_files_from_dir) tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(Datadir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-DataDATA @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-data-hook install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-DataDATA @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) uninstall-hook .MAKE: install-am install-data-am install-strip uninstall-am .PHONY: all all-am check check-am clean clean-generic clean-libtool \ cscopelist-am ctags-am distclean distclean-generic \ distclean-libtool distdir dvi dvi-am html html-am info info-am \ install install-DataDATA install-am install-data \ install-data-am install-data-hook install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \ uninstall-DataDATA uninstall-am uninstall-hook .PRECIOUS: Makefile install-data-hook: update-icon-cache uninstall-hook: update-icon-cache update-icon-cache: @-if test -z "$(DESTDIR)"; then \ echo "Updating Gtk icon cache."; \ $(gtk_update_icon_cache); \ else \ echo "*** Icon cache not updated. After (un)install, run this:"; \ echo "*** $(gtk_update_icon_cache)"; \ fi # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: lightdm-gtk-greeter-2.0.5/data/badges/ubuntu_badge-symbolic.svg0000664000175000017500000001424213243241724026527 0ustar00bluesabrebluesabre00000000000000 image/svg+xml lightdm-gtk-greeter-2.0.5/data/badges/pantheon_badge-symbolic.svg0000664000175000017500000000725113243241724027023 0ustar00bluesabrebluesabre00000000000000 image/svg+xml lightdm-gtk-greeter-2.0.5/data/badges/ubuntu-2d_badge-symbolic.svg0000664000175000017500000001424213243241724027032 0ustar00bluesabrebluesabre00000000000000 image/svg+xml lightdm-gtk-greeter-2.0.5/data/badges/gnome-shell_badge-symbolic.svg0000664000175000017500000000327613243241724027424 0ustar00bluesabrebluesabre00000000000000 image/svg+xml Gnome Symbolic Icon Theme Gnome Symbolic Icon Theme lightdm-gtk-greeter-2.0.5/data/badges/gnome-fallback_badge-symbolic.svg0000664000175000017500000000327613243241724030054 0ustar00bluesabrebluesabre00000000000000 image/svg+xml Gnome Symbolic Icon Theme Gnome Symbolic Icon Theme lightdm-gtk-greeter-2.0.5/data/badges/lxde_badge-symbolic.svg0000664000175000017500000001116213243241724026137 0ustar00bluesabrebluesabre00000000000000 image/svg+xml lightdm-gtk-greeter-2.0.5/data/badges/xfce_badge-symbolic.svg0000664000175000017500000000623313243241724026133 0ustar00bluesabrebluesabre00000000000000 image/svg+xml lightdm-gtk-greeter-2.0.5/data/Makefile.in0000664000175000017500000006151013253544551022350 0ustar00bluesabrebluesabre00000000000000# Makefile.in generated by automake 1.15.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2017 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # # Copyright (C) 2010 - 2011, Robert Ancell # Copyright (C) 2012 - 2013, Lionel Le Folgoc # Copyright (C) 2014, Sean Davis # Copyright (C) 2014, Simon Steinbeiß # # This program is free software: you can redistribute it and/or modify it under # the terms of the GNU General Public License as published by the Free Software # Foundation, either version 3 of the License, or (at your option) any later # version. See http://www.gnu.org/copyleft/gpl.html the full text of the # license. # VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = data ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ $(top_srcdir)/m4/introspection.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(dist_config_DATA) \ $(dist_doc_DATA) $(dist_xgreeters_DATA) $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(configdir)" "$(DESTDIR)$(docdir)" \ "$(DESTDIR)$(xgreetersdir)" DATA = $(dist_config_DATA) $(dist_doc_DATA) $(dist_xgreeters_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ distdir am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMODULE_CFLAGS = @GMODULE_CFLAGS@ GMODULE_LIBS = @GMODULE_LIBS@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ HAVE_EXO_CSOURCE = @HAVE_EXO_CSOURCE@ INDICATORDIR = @INDICATORDIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBIDO_CFLAGS = @LIBIDO_CFLAGS@ LIBIDO_LIBS = @LIBIDO_LIBS@ LIBINDICATOR_CFLAGS = @LIBINDICATOR_CFLAGS@ LIBINDICATOR_LIBS = @LIBINDICATOR_LIBS@ LIBINTL = @LIBINTL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIBX11_CFLAGS = @LIBX11_CFLAGS@ LIBX11_LIBS = @LIBX11_LIBS@ LIBXKLAVIER_CFLAGS = @LIBXKLAVIER_CFLAGS@ LIBXKLAVIER_LIBS = @LIBXKLAVIER_LIBS@ LIGHTDMGOBJECT_CFLAGS = @LIGHTDMGOBJECT_CFLAGS@ LIGHTDMGOBJECT_LIBS = @LIGHTDMGOBJECT_LIBS@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POSUB = @POSUB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ UNITY_INDICATORDIR = @UNITY_INDICATORDIR@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = $(datadir)/doc/lightdm-gtk-greeter dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = badges xgreetersdir = $(datadir)/xgreeters dist_xgreeters_DATA = lightdm-gtk-greeter.desktop dist_doc_DATA = sample-lightdm-gtk-greeter.css configdir = $(sysconfdir)/lightdm dist_config_DATA = lightdm-gtk-greeter.conf all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-dist_configDATA: $(dist_config_DATA) @$(NORMAL_INSTALL) @list='$(dist_config_DATA)'; test -n "$(configdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(configdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(configdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(configdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(configdir)" || exit $$?; \ done uninstall-dist_configDATA: @$(NORMAL_UNINSTALL) @list='$(dist_config_DATA)'; test -n "$(configdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(configdir)'; $(am__uninstall_files_from_dir) install-dist_docDATA: $(dist_doc_DATA) @$(NORMAL_INSTALL) @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \ done uninstall-dist_docDATA: @$(NORMAL_UNINSTALL) @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir) install-dist_xgreetersDATA: $(dist_xgreeters_DATA) @$(NORMAL_INSTALL) @list='$(dist_xgreeters_DATA)'; test -n "$(xgreetersdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(xgreetersdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(xgreetersdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(xgreetersdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(xgreetersdir)" || exit $$?; \ done uninstall-dist_xgreetersDATA: @$(NORMAL_UNINSTALL) @list='$(dist_xgreeters_DATA)'; test -n "$(xgreetersdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(xgreetersdir)'; $(am__uninstall_files_from_dir) # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile $(DATA) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(configdir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(xgreetersdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dist_configDATA install-dist_docDATA \ install-dist_xgreetersDATA install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-dist_configDATA uninstall-dist_docDATA \ uninstall-dist_xgreetersDATA .MAKE: $(am__recursive_targets) install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ check-am clean clean-generic clean-libtool cscopelist-am ctags \ ctags-am distclean distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am \ install-dist_configDATA install-dist_docDATA \ install-dist_xgreetersDATA install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs installdirs-am \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-am uninstall uninstall-am uninstall-dist_configDATA \ uninstall-dist_docDATA uninstall-dist_xgreetersDATA .PRECIOUS: Makefile # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: lightdm-gtk-greeter-2.0.5/data/sample-lightdm-gtk-greeter.css0000664000175000017500000002303313243241724026133 0ustar00bluesabrebluesabre00000000000000/* Theming samples for lightdm-gtk-greeter 1.8 Below are two samples of what a greeter theme in Gtk3 could look like. For the first one, we're only using the lightdm-gtk-greeter style-class. This is best if you just want to set a simple color-scheme. For more fine-grain control, you can also use the named widgets. Those are being used in the second sample, because that gives you maximum control over the greeter. */ /************************* * 1. Minimalistic theme * *************************/ .lightdm-gtk-greeter { background-color: black; color: white; } /************************* * 2. Advanced theme * *************************/ /* the panel widget at the top */ #panel_window { background-color: alpha (black, 0.5); color: white; font: bold; text-shadow: 0 1px alpha(black, 0.5); icon-shadow: 0 1px alpha(black, 0.5); box-shadow: inset 0 -1px alpha (black, 0.5); } /* the menubars/menus of the panel, i.e. indicators */ #panel_window .menubar, #panel_window .menubar > .menuitem { background-color: transparent; color: white; font: bold; text-shadow: 0 1px alpha(black, 0.5); icon-shadow: 0 1px alpha(black, 0.5); } #panel_window .menubar .menuitem:insensitive { color: alpha(white, 0.7); text-shadow: none; } #panel_window .menubar .menu { border-radius: 1px; } #panel_window .menubar .menu .menuitem { font: normal; text-shadow: none; } /* the login window */ #login_window, #shutdown_dialog, #restart_dialog { border-style: none; border-radius: 5px; background-color: @lightdm_bg_color; color: @lightdm_fg_color; /* the window widget doesn't have a border, so draw border using box-shadow */ box-shadow: inset 1px 0 shade(@lightdm_bg_color, 0.6), inset -1px 0 shade(@lightdm_bg_color, 0.6), inset 0 1px shade(@lightdm_bg_color, 0.6), inset 0 -1px shade(@lightdm_bg_color, 0.6); } /* the top half of the login-window, in GtkDialog terms, the content */ #content_frame { padding-bottom: 14px; } /* the user-combobox */ #login_window .menu { border-radius: 1px; } #login_window GtkComboBox .button, #login_window GtkComboBox .button:hover, #login_window GtkComboBox .button:active, #login_window GtkComboBox .button:active:hover, #login_window GtkComboBox .button:focus, #login_window GtkComboBox .button:hover:focus, #login_window GtkComboBox .button:active:focus, #login_window GtkComboBox .button:active:hover:focus { padding: 0; background: none; border-style: none; box-shadow: none; } #login_window GtkComboBox .button:focus, #login_window GtkComboBox .button:hover:focus, #login_window GtkComboBox .button:active:focus, #login_window GtkComboBox .button:active:hover:focus { box-shadow: inset 1px 0 alpha(@theme_selected_bg_color, 0.6), inset -1px 0 alpha(@theme_selected_bg_color, 0.6), inset 0 1px alpha(@theme_selected_bg_color, 0.6), inset 0 -1px alpha(@theme_selected_bg_color, 0.6); } #login_window #user_combobox { color: @lightdm_fg_color; font: 18px; } #login_window #user_combobox .menu { font: normal; } #login_window #user_combobox .arrow { color: mix(@lightdm_fg_color, @lightdm_bg_color, 0.5); } /* the entries, one for the username, one for the password */ #login_window .entry { padding: 3px 5px; border-width: 1px; border-style: solid; border-color: shade(@lightdm_bg_color, 0.8); border-radius: 3px; background-image: linear-gradient(to bottom, shade(@lightdm_bg_color, 0.95), shade(@lightdm_bg_color, 0.97) 30%, shade(@lightdm_bg_color, 1.02) ); color: @lightdm_fg_color; box-shadow: none; transition: all 150ms ease-out; } #login_window .entry:focus, #login_window .entry:hover { border-color: shade(@lightdm_bg_color, 0.7); box-shadow: inset 1px 0 alpha(@dark_shadow, 0.10), inset 0 1px alpha(@dark_shadow, 0.12), inset -1px 0 alpha(@dark_shadow, 0.10); } /* the buttons, alternatively this could also be done with a simple ".lightdm-gtk-greeter .button" */ #login_window .button, #shutdown_dialog .button, #restart_dialog .button { padding: 3px 15px; transition: all 150ms ease-out; } /* the user's avatar box */ #user_image { padding: 3px; border-radius: 3px; /* draw border using box-shadow */ box-shadow: inset 1px 0 shade(@lightdm_bg_color, 0.75), inset -1px 0 shade(@lightdm_bg_color, 0.75), inset 0 1px shade(@lightdm_bg_color, 0.55), inset 0 -1px shade(@lightdm_bg_color, 1.8); } /* the border around the user's avatar box */ #user_image_border { border-radius: 3px; box-shadow: inset 0 1px shade(@lightdm_bg_color, 0.8), inset 0 -1px shade(@lightdm_bg_color, 0.55); background-image: linear-gradient(to bottom, shade(@lightdm_bg_color, 0.9), shade(@lightdm_bg_color, 0.98) 10%, shade(@lightdm_bg_color, 1.0) 99%, shade(@lightdm_bg_color, 1.0) ); } /* the lower half of the login-window, in GtkDialog terms the buttonbox or action area */ #buttonbox_frame { padding-top: 20px; padding-bottom: 0px; border-style: none; border-bottom-left-radius: 5px; border-bottom-right-radius: 5px; background-image: linear-gradient(to bottom, shade(@bg_color, 0.85), shade(@bg_color, 0.98) 10%, shade(@bg_color, 1.0) 99%, shade(@bg_color, 1.0) ); box-shadow: inset 1px 0 shade(@lightdm_bg_color, 0.6), inset -1px 0 shade(@lightdm_bg_color, 0.6), inset 0 1px shade(@lightdm_bg_color, 0.6), inset 0 -1px shade(@lightdm_bg_color, 0.6); } /* the buttons that have focus by default in each window */ #login_window .button.default, #shutdown_dialog .button.default, #restart_dialog .button.default, #login_window .button:focus, #login_window .button:active:focus, #shutdown_dialog .button:focus, #shutdown_dialog .button:active:focus, #restart_dialog .button:focus, #restart_dialog .button:active:focus { border-color: shade(@theme_selected_bg_color, 0.8); background-image: linear-gradient(to bottom, shade(@theme_selected_bg_color, 1.02), shade(@theme_selected_bg_color, 0.95) 90%, shade(@theme_selected_bg_color, 0.90) ); color: @theme_selected_fg_color; } #login_window .button.default:hover, #shutdown_dialog .button.default:hover, #restart_dialog .button.default:hover, #login_window .button:hover:focus, #login_window .button:active:hover:focus, #shutdown_dialog .button:hover:focus, #shutdown_dialog .button:active:hover:focus, #restart_dialog .button:hover:focus, #restart_dialog .button:active:hover:focus { border-color: shade(@theme_selected_bg_color, 0.7); background-image: linear-gradient(to bottom, shade(@theme_selected_bg_color, 1.12), shade(@theme_selected_bg_color, 1.05) 90%, shade(@theme_selected_bg_color, 1.00) ); } /* the shutdown button */ #shutdown_button.button { border-color: shade(@error_bg_color, 0.8); background-image: linear-gradient(to bottom, shade(@error_bg_color, 1.02), shade(@error_bg_color, 0.95) 90%, shade(@error_bg_color, 0.90) ); color: @error_fg_color; } #shutdown_button.button:hover, #shutdown_button.button:active, #shutdown_button.button:active:hover { border-color: shade(@error_bg_color, 0.7); background-image: linear-gradient(to bottom, shade(@error_bg_color, 1.12), shade(@error_bg_color, 1.05) 90%, shade(@error_bg_color, 1.00) ); } /* the restart button */ #restart_button.button { border-color: shade(@warning_bg_color, 0.8); background-image: linear-gradient(to bottom, shade(@warning_bg_color, 1.02), shade(@warning_bg_color, 0.95) 90%, shade(@warning_bg_color, 0.90) ); color: @warning_fg_color; } #restart_button.button:hover, #restart_button.button:active, #restart_button.button:active:hover { border-color: shade(@warning_bg_color, 0.7); background-image: linear-gradient(to bottom, shade(@warning_bg_color, 1.12), shade(@warning_bg_color, 1.05) 90%, shade(@warning_bg_color, 1.00) ); } /* the warning, in case a wrong password is entered or something else goes wrong according to PAM */ #greeter_infobar { border-bottom-width: 0; font: bold; }lightdm-gtk-greeter-2.0.5/po/0000775000175000017500000000000013253545066020007 5ustar00bluesabrebluesabre00000000000000lightdm-gtk-greeter-2.0.5/po/nb.gmo0000664000175000017500000000224013253544623021106 0ustar00bluesabrebluesabre00000000000000 | E!gn  $  Q 9 DR o{    Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontRestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:42+0000 Last-Translator: Kjetil Birkeland Moe Language-Team: Norwegian Bokmal MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: nb Er du sikker på at du vil lukke alle programmer og starte datamaskinen på nytt?AvbrytKlarte ikke å autentisereKlarte ikke å starte øktenDvalemodusHøy kontrastUgyldig passord, prøv igjenStor skriftStart på nyttOmstart...Hvilemoduslightdm-gtk-greeter-2.0.5/po/he.gmo0000664000175000017500000000237213253544623021111 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  g 0M]+y    Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:39+0000 Last-Translator: Yaron Language-Team: Hebrew MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: he האם אכן ברצונך לסגור את כל התכניות ולהפעיל מחדש את המחשב?ביטולהאימות נכשלאירע כשל בהפעלהמצב שינהניגודיות גבוההססמה שגויה, נא לנסות שובגופן גדולאחר...‏הפעלה מחדשהפעלה מחדש...השהיהlightdm-gtk-greeter-2.0.5/po/sd.po0000664000175000017500000000607713253544112020756 0ustar00bluesabrebluesabre00000000000000# Sindhi translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:39+0000\n" "Last-Translator: Lionel Le Folgoc \n" "Language-Team: Sindhi \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: sd\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "ٻيهر چالو" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "توهان کي پڪ آهي ته توهان سڀ پروگرام بند ڪري ڪمپيوٽر کي ٻيهر شروع ڪرڻ گهرو ٿا؟" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "غلط ڳجهو لفظ، ٻيهر ڪوشش ڪريو" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "اجازت حاصل ڪرڻ ۾ ناڪام" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "روڪيو" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "سمهاريو" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "ٻيهر شروع..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "وڏا اکر" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "گھڻي ڪنٽراسٽ" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "رد" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/mhr.po0000664000175000017500000000574113253544112021133 0ustar00bluesabrebluesabre00000000000000# Mari (Meadow) translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:39+0000\n" "Last-Translator: Lionel Le Folgoc \n" "Language-Team: Mari (Meadow) \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: \n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Уэш колташ" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Йоҥылыш шолыпмут, эше икана тӧчыза" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Пурымаш йоҥылыш" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Вучыше режим" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Гибернаций" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Уэш колташ" #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Кугу шрифт" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Кӱкшык контраст" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Чараш" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/sv.po0000664000175000017500000000626113253544112020773 0ustar00bluesabrebluesabre00000000000000# Swedish translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2014-03-16 17:31+0000\n" "Last-Translator: Gunnar Hjalmarsson \n" "Language-Team: Swedish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: sv\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Starta om" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "Är du säker på att du vill stänga alla program och starta om datorn?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Stäng av" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "Är du säker på att du vill stänga alla program och stänga av datorn?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Lås upp" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Logga in" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Misslyckades med att starta sessionen" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Annan" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Gästsession" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Felaktigt lösenord, försök igen" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Misslyckades med att autentisera" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Annat..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Vänteläge" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Viloläge" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Starta om..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Stäng av..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Stort typsnitt" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Hög kontrast" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Skärmtangentbord" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Avbryt" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Ange ditt användarnamn" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Ange ditt lösenord" lightdm-gtk-greeter-2.0.5/po/pt_BR.gmo0000664000175000017500000000230013253544623021512 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  S,FO*^      Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:39+0000 Last-Translator: Lionel Le Folgoc Language-Team: Brazilian Portuguese MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n > 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: pt_BR Você tem certeza de que deseja fechar todos os programas e reiniciar o computador?CancelarFalhou ao autenticarFalhou ao iniciar sessãoHibernarContraste altoSenha incorreta, por favor tente novamenteFonte grandeOutro...ReiniciarReiniciar…Suspenderlightdm-gtk-greeter-2.0.5/po/si.gmo0000664000175000017500000000070713253544623021130 0ustar00bluesabrebluesabre00000000000000$,89Project-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2012-03-19 16:10+0000 Last-Translator: FULL NAME Language-Team: Sinhalese MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: lightdm-gtk-greeter-2.0.5/po/de.gmo0000664000175000017500000000356513253544623021112 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  lE^ "7Z"w  $ % .;J ] j     Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2015-07-07 15:46+0000 Last-Translator: Tobias Bannert Language-Team: German MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: de Sind Sie sicher, dass Sie alle Anwendungen schließen und einen Neustart des Rechners durchführen möchten?Sind Sie sicher, dass Sie alle Anwendungen schließen und den Rechner herunterfahren möchten?AbbrechenBitte Ihr Passwort eingebenBitte Ihren Benutzernamen eingebenLegitimierung fehlgeschlagenStarten der Sitzung fehlgeschlagenGastsitzungRuhezustandHoher KontrastFalsches Passwort, bitte wiederholenGroße SchriftAnmeldenBildschirmtastaturWeitereWeitere …NeustartNeustart …HerunterfahrenHerunterfahren …BereitschaftEntsperrenlightdm-gtk-greeter-2.0.5/po/hu.po0000664000175000017500000000640613253544112020760 0ustar00bluesabrebluesabre00000000000000# Hungarian translation for lightdm # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2014-11-12 15:06+0000\n" "Last-Translator: Gabor Kelemen \n" "Language-Team: Hungarian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: hu\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Újraindítás" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Biztos benne, hogy bezárja az összes programot, és újraindítja a " "számítógépet?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Leállítás" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" "Biztos, hogy bezárja az összes programot, és kikapcsolja a számítógépet?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Feloldás" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Bejelentkezés" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "A munkamenet indítása meghiúsult" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Egyéb" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Vendég munkamenet" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Hibás jelszó, próbálja újra" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "A hitelesítés sikertelen" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Más…" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Felfüggesztés" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hibernálás" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Újraindítás…" #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Leállítás…" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Nagy betűméret" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Nagy kontraszt" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Képernyő-billentyűzet" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Mégse" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Adja meg felhasználónevét" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Adja meg jelszavát" lightdm-gtk-greeter-2.0.5/po/ko.po0000664000175000017500000000603213253544112020750 0ustar00bluesabrebluesabre00000000000000# Korean translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-12-30 08:54+0000\n" "Last-Translator: Kim Boram \n" "Language-Team: Korean \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: ko\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "다시 시작" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "모든 프로그램을 닫고 컴퓨터를 다시 시작하겠습니까?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "잠금 해제" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "세션을 시작할 수 없습니다." #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "암호가 올바르지 않습니다. 다시 입력해주십시오." #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "인증할 수 없습니다." #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "기타..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "절전" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "최대 절전" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "다시 시작..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "큰 글꼴" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "고대비" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "취소" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/ast.po0000664000175000017500000000574213253544112021135 0ustar00bluesabrebluesabre00000000000000# Asturian translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:39+0000\n" "Last-Translator: ivarela \n" "Language-Team: Asturian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: ast\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Rearrancar" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "¿Daveres que quies zarrar tolos programes y reaniciar l'equipu?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Falló aniciar sesión" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Contraseña incorreuta, vuelvi a intentalo" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Fallu d'autenticación" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Otru ..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Suspender" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Ivernar" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Rearrancar..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Fonte Grande" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Contraste Altu" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Encaboxar" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/ia.gmo0000664000175000017500000000146513253544623021110 0ustar00bluesabrebluesabre00000000000000T E  #+G     +Are you sure you want to close all programs and restart the computer?CancelHibernateRestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:41+0000 Last-Translator: Sean Davis Language-Team: Interlingua MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: ia Secur que tu vole clauder tote le programmas e reinitiar le computator?CancellarHibernarRe-initiarReinitiar...Suspenderlightdm-gtk-greeter-2.0.5/po/ru.gmo0000664000175000017500000000442113253544623021140 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |   " /1Lh)N %%Djz     Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2015-02-09 11:29+0000 Last-Translator: Andrew P. Language-Team: Russian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: ru Вы действительно хотите закрыть все приложения и перезагрузить компьютер?Вы действительно хотите закрыть все приложения и выключить компьютер?ОтменаВведите ваш парольВведите ваш логинНе удалось выполнить входНе удалось запустить сеансГостевой сеансСпящий режимВысокая контрастностьНеверный пароль, попробуйте ввести ещё разКрупный шрифтВойтиЭкранная клавиатураДругой пользовательДругие...ПерезагрузитьПерезагрузить...ВыключитьВыключить…Ждущий режимРазблокироватьlightdm-gtk-greeter-2.0.5/po/uz.po0000664000175000017500000000635713253544112021007 0ustar00bluesabrebluesabre00000000000000# Uzbek translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:41+0000\n" "Last-Translator: Akmal Xushvaqov \n" "Language-Team: Uzbek \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: uz\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Ўчириб-ёқиш" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "Ҳамма дастурларни ёпишга ва компьютерни ўчириб-ёқишга розимисиз?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Сеансни ишга тушириб бўлмади" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Махфий сўз хато, илтимос, қайтадан уриниб кўринг" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Тасдиқдан ўтиш муваффақиятсиз якунланди" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Бошқа..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Кутиш усули" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Уйқуга кетиш" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Ўчириб-ёқиш" #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Катта шрифт" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Юқори контраст" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Бекор қилиш" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/fy.po0000664000175000017500000000600713253544112020757 0ustar00bluesabrebluesabre00000000000000# Frisian translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:39+0000\n" "Last-Translator: Sense Egbert Hofstede \n" "Language-Team: Frisian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: \n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Opnij starte" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Witte jo it seker dat jo alle programma's wol slute en de kompjûter opnij " "wol starte?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Starten fan sesje mislearre" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Ferkeard wachtwurd, besykje nochris" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Identifisearje mislearre" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Ûnderbrekke" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Sliepe" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Opnij starte..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Grut lettertype" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Heech kontrast" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Ôfbrekke" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/eu.po0000664000175000017500000000575013253544112020756 0ustar00bluesabrebluesabre00000000000000# Basque translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:42+0000\n" "Last-Translator: Lionel Le Folgoc \n" "Language-Team: Basque \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: eu\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Berrabiarazi" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Seguru programa guztiak itxi eta ordenagailua berrabiarazi nahi duzula?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Saioa hasteak huts egin du" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Pasahitz okerra, saiatu berriro" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Ezin izan da autentifikatu" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Beste bat..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Eseki" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hibernatu" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Berrabiarazi..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Letra-tipo handia" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Kontraste altua" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Utzi" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/kk.gmo0000664000175000017500000000420613253544623021120 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  AL)^:&-4I?g'  ,GVh y     Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2017-05-02 05:01+0000 Last-Translator: Baurzhan Muftakhidinov Language-Team: Kazakh MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: kk Барлық бағдарламаларды жауып, компьютеріңізді қайта жүктеуді қалайсыз ба?Барлық бағдарламаларды жауып, компьютеріңізді сөндіруді қалайсыз ба?Бас тартуПароліңізді енгізіңізПайдаланушы атыңызды енгізіңізКіру сәтсіз аяқталдыСеанс бастау мүмкін емесҚонақ сессиясыГибернацияЖоғары контрастПароль қате, қайта енгізіп көріңізҮлкен қаріпЖүйеге кіруЭкрандағы пернетақтаБасқаБасқа...Қайта жүктеуҚайта жүктеу...СөндіруСөндіру...ҰйықтатуБосатуlightdm-gtk-greeter-2.0.5/po/ml.po0000664000175000017500000000570313253544112020753 0ustar00bluesabrebluesabre00000000000000# Malayalam translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:39+0000\n" "Last-Translator: Lionel Le Folgoc \n" "Language-Team: Malayalam \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: ml\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "സെഷന്‍ തുടങ്ങാന്‍ പരാജയപെട്ടു" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "ശിശിര നിദ്ര" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "പുനരാരംഭിക്കുക" #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "വലിയ ഫോണ്ട്" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "വേണ്ട" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/ta.gmo0000664000175000017500000000316713253544623021124 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  y:I%:r`'!!3!U  Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:39+0000 Last-Translator: Barneedhar Language-Team: Tamil MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: ta அனைத்து நிரல்களையும் மூடி கணினியை மீள்துவக்கம் செய்ய உறுதியாக உள்ளீர்களா?ரத்துசெய்சரிபார்க்க இயலவில்லைஉட்புகுதல் தோல்வியடைந்ததுஇடை உறக்கம்உயர் மாறுபாடுதவறான கடவுச்சொல்,மீண்டும் முயற்சிக்கவும்தடிமஎழுத்துருமற்றவை...மீள்துவக்குமீள்துவக்குஒத்திப்போடுlightdm-gtk-greeter-2.0.5/po/it.po0000664000175000017500000000624313253544112020757 0ustar00bluesabrebluesabre00000000000000# Italian translation for lightdm # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2014-11-22 14:26+0000\n" "Last-Translator: Milo Casagrande \n" "Language-Team: Italian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: it\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Riavvia" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "Chiudere veramente tutti i programmi e riavviare il computer?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Spegni" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "Chiudere tutti i programmi e spegnere il computer?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Sblocca" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Accedi" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Avvio della sessione non riuscito" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Altro" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Sessione ospite" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Password non corretta, provare di nuovo" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Autenticazione non riuscita" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Altri..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Sospendi" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Iberna" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Riavvia..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Spegni..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Caratteri grandi" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Contrasto elevato" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Tastiera a schermo" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Annulla" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Inserire il proprio nome utente" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Inserire la propria password" lightdm-gtk-greeter-2.0.5/po/fi.po0000664000175000017500000000634413253544112020743 0ustar00bluesabrebluesabre00000000000000# Finnish translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2014-03-20 01:29+0000\n" "Last-Translator: Pasi Lallinaho \n" "Language-Team: Finnish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: fi\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Käynnistä uudelleen" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Haluatko todella sulkea kaikki ohjelmat ja käynnistää tietokoneen uudelleen?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Sammuta" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" "Haluatko varmasti lopettaa kaikki sovellukset ja sammuttaa tietokoneen?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Avaa lukitus" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Kirjaudu sisään" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Istunnon aloitus epäonnistui" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Muu..." #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Vierasistunto" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Väärä salasana, yritä uudelleen" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Tunnistautuminen epäonnistui" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Muu…" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Valmiustila" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Lepotila" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Käynnistä uudelleen..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Sammuta…" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Suuri kirjasin" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Suuri kontrasti" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Näyttönäppäimistö" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Peru" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Syötä käyttäjänimesi" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Syötä salasanasi" lightdm-gtk-greeter-2.0.5/po/Makefile.in.in0000644000175000017500000004225113243246351022455 0ustar00bluesabrebluesabre00000000000000# Makefile for PO directory in any package using GNU gettext. # Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper # # Copying and distribution of this file, with or without modification, # are permitted in any medium without royalty provided the copyright # notice and this notice are preserved. This file is offered as-is, # without any warranty. # # Origin: gettext-0.19.7 GETTEXT_MACRO_VERSION = 0.19 PACKAGE = @PACKAGE@ VERSION = @VERSION@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ SED = @SED@ SHELL = /bin/sh @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ datarootdir = @datarootdir@ datadir = @datadir@ localedir = @localedir@ gettextsrcdir = $(datadir)/gettext/po INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ # We use $(mkdir_p). # In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as # "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions, # @install_sh@ does not start with $(SHELL), so we add it. # In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined # either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake # versions, $(mkinstalldirs) and $(install_sh) are unused. mkinstalldirs = $(SHELL) @install_sh@ -d install_sh = $(SHELL) @install_sh@ MKDIR_P = @MKDIR_P@ mkdir_p = @mkdir_p@ # When building gettext-tools, we prefer to use the built programs # rather than installed programs. However, we can't do that when we # are cross compiling. CROSS_COMPILING = @CROSS_COMPILING@ GMSGFMT_ = @GMSGFMT@ GMSGFMT_no = @GMSGFMT@ GMSGFMT_yes = @GMSGFMT_015@ GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT)) MSGFMT_ = @MSGFMT@ MSGFMT_no = @MSGFMT@ MSGFMT_yes = @MSGFMT_015@ MSGFMT = $(MSGFMT_$(USE_MSGCTXT)) XGETTEXT_ = @XGETTEXT@ XGETTEXT_no = @XGETTEXT@ XGETTEXT_yes = @XGETTEXT_015@ XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT)) MSGMERGE = msgmerge MSGMERGE_UPDATE = @MSGMERGE@ --update MSGINIT = msginit MSGCONV = msgconv MSGFILTER = msgfilter POFILES = @POFILES@ GMOFILES = @GMOFILES@ UPDATEPOFILES = @UPDATEPOFILES@ DUMMYPOFILES = @DUMMYPOFILES@ DISTFILES.common = Makefile.in.in remove-potcdate.sin \ $(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \ $(POFILES) $(GMOFILES) \ $(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) POTFILES = \ CATALOGS = @CATALOGS@ POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot POFILESDEPS_yes = $(POFILESDEPS_) POFILESDEPS_no = POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT)) DISTFILESDEPS_ = update-po DISTFILESDEPS_yes = $(DISTFILESDEPS_) DISTFILESDEPS_no = DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO)) # Makevars gets inserted here. (Don't remove this line!) .SUFFIXES: .SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update .po.mo: @echo "$(MSGFMT) -c -o $@ $<"; \ $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@ .po.gmo: @lang=`echo $* | sed -e 's,.*/,,'`; \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \ cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo .sin.sed: sed -e '/^#/d' $< > t-$@ mv t-$@ $@ all: all-@USE_NLS@ all-yes: stamp-po all-no: # Ensure that the gettext macros and this Makefile.in.in are in sync. CHECK_MACRO_VERSION = \ test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \ || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \ exit 1; \ } # $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no # internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because # we don't want to bother translators with empty POT files). We assume that # LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty. # In this case, stamp-po is a nop (i.e. a phony target). # stamp-po is a timestamp denoting the last time at which the CATALOGS have # been loosely updated. Its purpose is that when a developer or translator # checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS, # "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent # invocations of "make" will do nothing. This timestamp would not be necessary # if updating the $(CATALOGS) would always touch them; however, the rule for # $(POFILES) has been designed to not touch files that don't need to be # changed. stamp-po: $(srcdir)/$(DOMAIN).pot @$(CHECK_MACRO_VERSION) test ! -f $(srcdir)/$(DOMAIN).pot || \ test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES) @test ! -f $(srcdir)/$(DOMAIN).pot || { \ echo "touch stamp-po" && \ echo timestamp > stamp-poT && \ mv stamp-poT stamp-po; \ } # Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', # otherwise packages like GCC can not be built if only parts of the source # have been downloaded. # This target rebuilds $(DOMAIN).pot; it is an expensive operation. # Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. # The determination of whether the package xyz is a GNU one is based on the # heuristic whether some file in the top level directory mentions "GNU xyz". # If GNU 'find' is available, we avoid grepping through monster files. $(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed package_gnu="$(PACKAGE_GNU)"; \ test -n "$$package_gnu" || { \ if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \ LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f \ -size -10000000c -exec grep 'GNU @PACKAGE@' \ /dev/null '{}' ';' 2>/dev/null; \ else \ LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \ fi; \ } | grep -v 'libtool:' >/dev/null; then \ package_gnu=yes; \ else \ package_gnu=no; \ fi; \ }; \ if test "$$package_gnu" = "yes"; then \ package_prefix='GNU '; \ else \ package_prefix=''; \ fi; \ if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \ msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \ else \ msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \ fi; \ case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ --files-from=$(srcdir)/POTFILES.in \ --copyright-holder='$(COPYRIGHT_HOLDER)' \ --msgid-bugs-address="$$msgid_bugs_address" \ ;; \ *) \ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ --files-from=$(srcdir)/POTFILES.in \ --copyright-holder='$(COPYRIGHT_HOLDER)' \ --package-name="$${package_prefix}@PACKAGE@" \ --package-version='@VERSION@' \ --msgid-bugs-address="$$msgid_bugs_address" \ ;; \ esac test ! -f $(DOMAIN).po || { \ if test -f $(srcdir)/$(DOMAIN).pot-header; then \ sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \ cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po; \ rm -f $(DOMAIN).1po; \ fi; \ if test -f $(srcdir)/$(DOMAIN).pot; then \ sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ else \ rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ fi; \ else \ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ fi; \ } # This rule has no dependencies: we don't need to update $(DOMAIN).pot at # every "make" invocation, only create it when it is missing. # Only "make $(DOMAIN).pot-update" or "make dist" will force an update. $(srcdir)/$(DOMAIN).pot: $(MAKE) $(DOMAIN).pot-update # This target rebuilds a PO file if $(DOMAIN).pot has changed. # Note that a PO file is not touched if it doesn't need to be changed. $(POFILES): $(POFILESDEPS) @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ if test -f "$(srcdir)/$${lang}.po"; then \ test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot; \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \ cd $(srcdir) \ && { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \ *) \ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \ esac; \ }; \ else \ $(MAKE) $${lang}.po-create; \ fi install: install-exec install-data install-exec: install-data: install-data-@USE_NLS@ if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ for file in $(DISTFILES.common) Makevars.template; do \ $(INSTALL_DATA) $(srcdir)/$$file \ $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ for file in Makevars; do \ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ else \ : ; \ fi install-data-no: all install-data-yes: all @catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \ cat=`basename $$cat`; \ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ dir=$(localedir)/$$lang/LC_MESSAGES; \ $(mkdir_p) $(DESTDIR)$$dir; \ if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ if test -n "$$lc"; then \ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ for file in *; do \ if test -f $$file; then \ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ fi; \ done); \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ else \ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ :; \ else \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ fi; \ fi; \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ fi; \ done; \ done install-strip: install installdirs: installdirs-exec installdirs-data installdirs-exec: installdirs-data: installdirs-data-@USE_NLS@ if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ else \ : ; \ fi installdirs-data-no: installdirs-data-yes: @catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \ cat=`basename $$cat`; \ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ dir=$(localedir)/$$lang/LC_MESSAGES; \ $(mkdir_p) $(DESTDIR)$$dir; \ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ if test -n "$$lc"; then \ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ for file in *; do \ if test -f $$file; then \ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ fi; \ done); \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ else \ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ :; \ else \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ fi; \ fi; \ fi; \ done; \ done # Define this as empty until I found a useful application. installcheck: uninstall: uninstall-exec uninstall-data uninstall-exec: uninstall-data: uninstall-data-@USE_NLS@ if test "$(PACKAGE)" = "gettext-tools"; then \ for file in $(DISTFILES.common) Makevars.template; do \ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ else \ : ; \ fi uninstall-data-no: uninstall-data-yes: catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \ cat=`basename $$cat`; \ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ done; \ done check: all info dvi ps pdf html tags TAGS ctags CTAGS ID: mostlyclean: rm -f remove-potcdate.sed rm -f stamp-poT rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po rm -fr *.o clean: mostlyclean distclean: clean rm -f Makefile Makefile.in POTFILES *.mo maintainer-clean: distclean @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." rm -f stamp-po $(GMOFILES) distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) dist distdir: test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS) @$(MAKE) dist2 # This is a separate target because 'update-po' must be executed before. dist2: stamp-po $(DISTFILES) dists="$(DISTFILES)"; \ if test "$(PACKAGE)" = "gettext-tools"; then \ dists="$$dists Makevars.template"; \ fi; \ if test -f $(srcdir)/$(DOMAIN).pot; then \ dists="$$dists $(DOMAIN).pot stamp-po"; \ fi; \ if test -f $(srcdir)/ChangeLog; then \ dists="$$dists ChangeLog"; \ fi; \ for i in 0 1 2 3 4 5 6 7 8 9; do \ if test -f $(srcdir)/ChangeLog.$$i; then \ dists="$$dists ChangeLog.$$i"; \ fi; \ done; \ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ for file in $$dists; do \ if test -f $$file; then \ cp -p $$file $(distdir) || exit 1; \ else \ cp -p $(srcdir)/$$file $(distdir) || exit 1; \ fi; \ done update-po: Makefile $(MAKE) $(DOMAIN).pot-update test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) $(MAKE) update-gmo # General rule for creating PO files. .nop.po-create: @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \ echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \ exit 1 # General rule for updating PO files. .nop.po-update: @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \ tmpdir=`pwd`; \ echo "$$lang:"; \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ cd $(srcdir); \ if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ *) \ $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ esac; \ }; then \ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ rm -f $$tmpdir/$$lang.new.po; \ else \ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ :; \ else \ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ exit 1; \ fi; \ fi; \ else \ echo "msgmerge for $$lang.po failed!" 1>&2; \ rm -f $$tmpdir/$$lang.new.po; \ fi $(DUMMYPOFILES): update-gmo: Makefile $(GMOFILES) @: # Recreate Makefile by invoking config.status. Explicitly invoke the shell, # because execution permission bits may not work on the current file system. # Use @SHELL@, which is the shell determined by autoconf for the use by its # scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient. Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@ cd $(top_builddir) \ && @SHELL@ ./config.status $(subdir)/$@.in po-directories force: # Tell versions [3.59,3.63) of GNU make not to export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: lightdm-gtk-greeter-2.0.5/po/is.po0000664000175000017500000000635113253544112020756 0ustar00bluesabrebluesabre00000000000000# Icelandic translation for lightdm-gtk-greeter # Copyright (c) 2015 Rosetta Contributors and Canonical Ltd 2015 # This file is distributed under the same license as the lightdm-gtk-greeter package. # FIRST AUTHOR , 2015. # msgid "" msgstr "" "Project-Id-Version: lightdm-gtk-greeter\n" "Report-Msgid-Bugs-To: FULL NAME \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2015-04-23 21:29+0000\n" "Last-Translator: Björgvin Ragnarsson \n" "Language-Team: Icelandic \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Endurræsa" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "Viltu örugglega loka öllum forritum og endurræsa tölvuna?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Slökkva" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "Viltu örugglega loka öllum forritum og slökkva á tölvunni?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Aflæsa" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Skrá inn" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Mistókst að hefja setu" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Annað" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Gestaaðgangur" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Rangt lykilorð, vinsamlegast reyndu aftur" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Auðkenning mistókst" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Annað..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Svæfa" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Leggja í dvala" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Endurræsa..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Slökkva..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Stórt letur" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Mikil birtuskil" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Lyklaborð á skjá" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Hætta við" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Sláðu inn notandanafnið þitt" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Sláðu inn lykilorðið þitt" lightdm-gtk-greeter-2.0.5/po/ar.po0000664000175000017500000000625313253544112020746 0ustar00bluesabrebluesabre00000000000000# Arabic translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:42+0000\n" "Last-Translator: Lionel Le Folgoc \n" "Language-Team: Arabic \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=6; plural=n==0 ? 0 : n==1 ? 1 : n==2 ? 2 : n % 100 >= " "3 && n % 100 <= 10 ? 3 : n % 100 >= 11 && n % 100 <= 99 ? 4 : 5;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: ar\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "إعادة تشغيل" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "أمتأكد أنك ترغب في إغلاق كل البرامج وإعادة تشغيل الحاسوب؟" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "فشل بدء الجلسة" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "كلمة سر غير صحيحة، حاول مرة أخرى" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "فشل في الإستيثاق" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "آخر..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "تعليق" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "إسبات" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "أعِد التشغيل..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "خط كبير" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "تباين عالي" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "إلغاء" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/hi.gmo0000664000175000017500000000310513253544623021110 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  sB=!(0]Y &)2  Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:39+0000 Last-Translator: Vibhav Pant Language-Team: Hindi MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: hi क्या आप सभी कार्यक्रमों को बंद करके कम्प्यूटर को पुनःप्रांरभ करना चाहते है?रद्द करेंप्रमाणित करने में असफलतासत्र शुरू करना असफल रहासुप्तावस्थाउच्च कंट्रास्टगलत पासवर्ड, कृपया पुनः प्रयास करेंबड़े अक्षरअन्यपुनः आरंभ करेंपुनः आरंभ करें...स्थगितlightdm-gtk-greeter-2.0.5/po/gl.po0000664000175000017500000000631313253544112020743 0ustar00bluesabrebluesabre00000000000000# Galician translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2017-09-16 19:22+0000\n" "Last-Translator: Marcos Lans \n" "Language-Team: Galician \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: gl\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Reiniciar" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Ten certeza de que desexa pechar todos os programas e reiniciar o computador?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Apagar" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "Está seguro de pechar todos os programas e apagar o computador?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Desbloquear" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Iniciar sesión" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Produciuse un fallo ao iniciar a sesión" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Outro" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Sesión de convidado" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Contrasinal incorrecto, ténteo de novo" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Produciuse un fallo ao autenticar" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Outro..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Suspender" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hibernar" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Reiniciar..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Apagar..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Letras grandes" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Contraste alto" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Teclado na pantalla" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Cancelar" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Introduza o nome de usuario" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Insira o seu contrasinal" lightdm-gtk-greeter-2.0.5/po/hr.gmo0000664000175000017500000000171013253544623021121 0ustar00bluesabrebluesabre00000000000000\ E  + 3>FQ!s {  Are you sure you want to close all programs and restart the computer?CancelHibernateLarge FontRestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:42+0000 Last-Translator: gogo Language-Team: Croatian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: hr Jeste li sigurni da želite zatvoriti sve programe i ponovno pokrenuti računalo?OtkažiHibernacijaVelika slovaPonovno pokretanjePonovno pokretanje...Suspenzijalightdm-gtk-greeter-2.0.5/po/wae.gmo0000664000175000017500000000173713253544623021275 0ustar00bluesabrebluesabre00000000000000 d E'. E$S x 5# Yc%    Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateHigh ContrastIncorrect password, please try againLarge FontRestartRestart...Project-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:39+0000 Last-Translator: Lionel Le Folgoc Language-Team: Walser MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: Alli programm gšliesse und de kompiuter niw štarte?AbbräčeAuthentifizierig fãlgšlageSchtarčä kontraštFalšes paṣword, versüečses numalGrosi šriftNiwštartNiwštart...lightdm-gtk-greeter-2.0.5/po/hi.po0000664000175000017500000000660613253544112020746 0ustar00bluesabrebluesabre00000000000000# Hindi translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:39+0000\n" "Last-Translator: Vibhav Pant \n" "Language-Team: Hindi \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: hi\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "पुनः आरंभ करें" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "क्या आप सभी कार्यक्रमों को बंद करके कम्प्यूटर को पुनःप्रांरभ करना चाहते है?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "सत्र शुरू करना असफल रहा" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "गलत पासवर्ड, कृपया पुनः प्रयास करें" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "प्रमाणित करने में असफलता" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "अन्य" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "स्थगित" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "सुप्तावस्था" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "पुनः आरंभ करें..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "बड़े अक्षर" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "उच्च कंट्रास्ट" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "रद्द करें" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/ast.gmo0000664000175000017500000000224113253544623021277 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  @ &.*= hu ~    Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:39+0000 Last-Translator: ivarela Language-Team: Asturian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: ast ¿Daveres que quies zarrar tolos programes y reaniciar l'equipu?EncaboxarFallu d'autenticaciónFalló aniciar sesiónIvernarContraste AltuContraseña incorreuta, vuelvi a intentaloFonte GrandeOtru ...RearrancarRearrancar...Suspenderlightdm-gtk-greeter-2.0.5/po/is.gmo0000664000175000017500000000346113253544623021130 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  =e?  /E^m}*       ")     Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm-gtk-greeter Report-Msgid-Bugs-To: FULL NAME PO-Revision-Date: 2015-04-23 21:29+0000 Last-Translator: Björgvin Ragnarsson Language-Team: Icelandic MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Viltu örugglega loka öllum forritum og endurræsa tölvuna?Viltu örugglega loka öllum forritum og slökkva á tölvunni?Hætta viðSláðu inn lykilorðið þittSláðu inn notandanafnið þittAuðkenning mistókstMistókst að hefja setuGestaaðgangurLeggja í dvalaMikil birtuskilRangt lykilorð, vinsamlegast reyndu afturStórt leturSkrá innLyklaborð á skjáAnnaðAnnað...EndurræsaEndurræsa...SlökkvaSlökkva...SvæfaAflæsalightdm-gtk-greeter-2.0.5/po/mhr.gmo0000664000175000017500000000176113253544623021304 0ustar00bluesabrebluesabre00000000000000 l   $' LW _jr  *??]  CancelFailed to authenticateHibernateHigh ContrastIncorrect password, please try againLarge FontRestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:39+0000 Last-Translator: Lionel Le Folgoc Language-Team: Mari (Meadow) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=1; plural=0; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: ЧарашПурымаш йоҥылышГибернацийКӱкшык контрастЙоҥылыш шолыпмут, эше икана тӧчызаКугу шрифтУэш колташУэш колташВучыше режимlightdm-gtk-greeter-2.0.5/po/es.po0000664000175000017500000000627213253544112020754 0ustar00bluesabrebluesabre00000000000000# Spanish translation for lightdm # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2014-08-06 17:02+0000\n" "Last-Translator: Adolfo Jayme \n" "Language-Team: Spanish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: es\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Reiniciar" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "¿Está seguro de que quiere cerrar todos los programas y reiniciar el equipo?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Apagar" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" "¿Está seguro de que quiere cerrar todos los programas y apagar el equipo?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Desbloquear" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Acceder" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Fallo al iniciar sesión" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Alguien más" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Sesión de invitado" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Contraseña incorrecta, inténtelo de nuevo" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Fallo al autenticar" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Otros…" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Suspender" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hibernar" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Reiniciar…" #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Apagar…" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Letra grande" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Contraste alto" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Teclado en pantalla" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Cancelar" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Escriba su nombre de usuario" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Escriba su contraseña" lightdm-gtk-greeter-2.0.5/po/it.gmo0000664000175000017500000000340113253544623021123 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  =M2!AQX'j       Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2014-11-22 14:26+0000 Last-Translator: Milo Casagrande Language-Team: Italian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: it Chiudere veramente tutti i programmi e riavviare il computer?Chiudere tutti i programmi e spegnere il computer?AnnullaInserire la propria passwordInserire il proprio nome utenteAutenticazione non riuscitaAvvio della sessione non riuscitoSessione ospiteIbernaContrasto elevatoPassword non corretta, provare di nuovoCaratteri grandiAccediTastiera a schermoAltroAltri...RiavviaRiavvia...SpegniSpegni...SospendiSbloccalightdm-gtk-greeter-2.0.5/po/ku.gmo0000664000175000017500000000226313253544623021133 0ustar00bluesabrebluesabre00000000000000 | E!gn  $  S% 6@'Ow  Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontRestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:41+0000 Last-Translator: Erdal Ronahi Language-Team: Kurdish MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: ku Bi rastî dixwazî hemû bernameyan bigirî û komputerê dîsa bidî destpêkirin?BetalPiştrastkirin bi ser neketDestpêkirina danişinê bi ser neketXewa kûrDijberiya berzNasnavê şaş, carekî din biceribîneCurenivîsê mezinDîsdestpêkirinDîsdestpêkirin...Xewlightdm-gtk-greeter-2.0.5/po/zh_HK.gmo0000664000175000017500000000221613253544623021515 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  9) 0: V ` jw  Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-09-21 02:04+0000 Last-Translator: Walter Cheuk Language-Team: Chinese (Hong Kong) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=1; plural=0; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: zh_HK 您確定要關閉所有程式，並重新啟動電腦？取消身分核證失敗無法啟動作業階段休眠高對比密碼不正確，請重試大字型其它…重新啟動重新啟動...暫停lightdm-gtk-greeter-2.0.5/po/lightdm-gtk-greeter.pot0000644000175000017500000000525113251223303024363 0ustar00bluesabrebluesabre00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Rosetta Contributors and Canonical Ltd # This file is distributed under the same license as the lightdm-gtk-greeter package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: lightdm-gtk-greeter 2.0.4\n" "Report-Msgid-Bugs-To: https://launchpad.net/lightdm-gtk-greeter\n" "POT-Creation-Date: 2018-03-11 08:53-0400\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" #: src/lightdm-gtk-greeter.c:520 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: src/lightdm-gtk-greeter.c:1919 msgid "Restart" msgstr "" #: src/lightdm-gtk-greeter.c:1920 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" #: src/lightdm-gtk-greeter.c:1928 msgid "Shut Down" msgstr "" #: src/lightdm-gtk-greeter.c:1929 msgid "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: src/lightdm-gtk-greeter.c:1943 msgid "Unlock" msgstr "" #: src/lightdm-gtk-greeter.c:1945 src/lightdm-gtk-greeter.glade:560 msgid "Log In" msgstr "" #: src/lightdm-gtk-greeter.c:2134 msgid "Failed to start session" msgstr "" #: src/lightdm-gtk-greeter.c:2264 msgid "Other" msgstr "" #: src/lightdm-gtk-greeter.c:2281 src/lightdm-gtk-greeter.c:2618 msgid "Guest Session" msgstr "" #: src/lightdm-gtk-greeter.c:2495 msgid "Incorrect password, please try again" msgstr "" #: src/lightdm-gtk-greeter.c:2502 msgid "Failed to authenticate" msgstr "" #: src/lightdm-gtk-greeter.c:2626 msgid "Other..." msgstr "" #: src/lightdm-gtk-greeter.glade:34 msgid "Suspend" msgstr "" #: src/lightdm-gtk-greeter.glade:42 msgid "Hibernate" msgstr "" #: src/lightdm-gtk-greeter.glade:50 msgid "Restart..." msgstr "" #: src/lightdm-gtk-greeter.glade:60 msgid "Shut Down..." msgstr "" #: src/lightdm-gtk-greeter.glade:84 msgid "Large Font" msgstr "" #: src/lightdm-gtk-greeter.glade:94 msgid "High Contrast" msgstr "" #: src/lightdm-gtk-greeter.glade:104 msgid "On Screen Keyboard" msgstr "" #: src/lightdm-gtk-greeter.glade:115 msgid "Screen Reader" msgstr "" #: src/lightdm-gtk-greeter.glade:283 src/lightdm-gtk-greeter.glade:545 msgid "Cancel" msgstr "" #: src/lightdm-gtk-greeter.glade:298 msgid "OK" msgstr "" #: src/lightdm-gtk-greeter.glade:440 msgid "Enter your username" msgstr "" #: src/lightdm-gtk-greeter.glade:461 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/pl.po0000664000175000017500000000645713253544112020765 0ustar00bluesabrebluesabre00000000000000# Polish translation for lightdm # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2014-03-17 16:53+0000\n" "Last-Translator: Piotr Strębski \n" "Language-Team: Polish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 " "|| n%100>=20) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: pl\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Uruchom ponownie" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Zakończyć działanie wszystkich programów i ponownie uruchomić komputer?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Wyłącz komputer" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "Zakończyć działanie wszystkich programów i wyłączyć komputer?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Odblokuj" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Zaloguj" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Nie udało się uruchomić sesji" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Inne" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Sesja gościa" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Nieprawidłowe hasło. Proszę spróbować ponownie." #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Nie udało się uwierzytelnić" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Inny użytkownik..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Wstrzymaj" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Zahibernuj" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Uruchom ponownie..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Wyłącz komputer..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Duża czcionka" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Wysoki kontrast" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Klawiatura ekranowa" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Anuluj" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Wprowadź nazwę użytkownika" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Wprowadź hasło" lightdm-gtk-greeter-2.0.5/po/sk.gmo0000664000175000017500000000354313253544623021133 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  N`I$;Xs ,  +< EQ X     Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2016-07-17 14:37+0000 Last-Translator: Dusan Kazik Language-Team: Slovak MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=3; plural=(n==1) ? 1 : (n>=2 && n<=4) ? 2 : 0; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: sk Ste si istý, že chcete zavrieť všetky programy a reštartovať počítač?Ste si istý, že chcete zavrieť všetky programy a vypnúť počítač?ZrušiťZadajte vaše hesloZadajte vaše používateľské menoZlyhalo overenie totožnostiZlyhalo spustenie relácieHosťovská reláciaHibernovaťVysoký kontrastNesprávne heslo. Prosím, skúste to znovu.Veľké písmoPrihlásiť saKlávesnica na obrazovkeInýNiekto iný...ReštartovaťReštartovať...VypnúťVypnúť...UspaťOdomknúťlightdm-gtk-greeter-2.0.5/po/he.po0000664000175000017500000000607113253544112020736 0ustar00bluesabrebluesabre00000000000000# Hebrew translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:39+0000\n" "Last-Translator: Yaron \n" "Language-Team: Hebrew \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: he\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "הפעלה מחדש" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "האם אכן ברצונך לסגור את כל התכניות ולהפעיל מחדש את המחשב?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "אירע כשל בהפעלה" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "ססמה שגויה, נא לנסות שוב" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "האימות נכשל" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "אחר...‏" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "השהיה" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "מצב שינה" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "הפעלה מחדש..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "גופן גדול" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "ניגודיות גבוהה" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "ביטול" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/bs.gmo0000664000175000017500000000355413253544623021124 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  VM*3Cav -  '6HN W a     Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2017-04-12 22:46+0000 Last-Translator: Emir Beganović Language-Team: Bosnian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: bs Da li ste sigurni da želite da zatvorite sve programe i da ponovo pokrenete računar?Da li ste sigurni da želite da zatvorite sve programe i da ugasite računar?OdustaniUnesite lozinkuUnesite svoje korisničko imeProvjera neuspješnaNeuspjelo pokretanje sesijeSesija za gosteHibernacijaVisoki kontrastNepravilna lozinka, molimo pokušajte ponovnoVeliki fontPrijavi seTastatura na ekranuOstaloDrugo...Ponovo pokreniPonovo pokreni...UgasiUgasi...SuspendujOtključajlightdm-gtk-greeter-2.0.5/po/eo.po0000664000175000017500000000574213253544112020751 0ustar00bluesabrebluesabre00000000000000# Esperanto translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:39+0000\n" "Last-Translator: Sean Davis \n" "Language-Team: Esperanto \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: eo\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Restartigi" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Ĉu vi certe volas fermi ĉiujn programojn kaj restartigi la komputilon?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Starto de seanco fiaskis" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Malĝusta pasvorto, bonvolu provi denove" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Aŭtentigado fiaskis" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Alia..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Paŭzigi" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Pasivumigi" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Restartigi..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Granda tiparo" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Alta kontrasto" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Nuligi" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/ca@valencia.po0000664000175000017500000000606313253544112022531 0ustar00bluesabrebluesabre00000000000000# Catalan (Valencian) translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:42+0000\n" "Last-Translator: David Planella \n" "Language-Team: Catalan (Valencian) \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: \n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Reinicia" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Esteu segur que voleu tancar tots els programes i reiniciar l'ordinador?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Ha fallat l'inici de la sessió" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "La contrasenya és incorrecta, torneu a provar-ho" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Ha fallat l'autenticació" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Altres..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Para temporalment" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hiberna" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Reinicia..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Mida de lletra gran" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Contrast alt" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Cancel·la" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/POTFILES.in0000664000175000017500000000007113243241724021553 0ustar00bluesabrebluesabre00000000000000src/lightdm-gtk-greeter.c src/lightdm-gtk-greeter.glade lightdm-gtk-greeter-2.0.5/po/id.po0000664000175000017500000000571213253544112020737 0ustar00bluesabrebluesabre00000000000000# Indonesian translation for lightdm # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:41+0000\n" "Last-Translator: Andika Triwidada \n" "Language-Team: Indonesian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: id\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Nyalakan Ulang" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "Anda yakin akan menutup semua program dan menyalakan ulang komputer?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Gagal memulai sesi" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Sandi salah, silakan coba lagi" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Otentikasi gagal" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Suspen" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hibernasi" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Mulai ulang..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Font Besar" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Kontras Tinggi" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Batal" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/fr.gmo0000664000175000017500000000354313253544623021125 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  NKL! .Kk}+    , 6CT     Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2014-03-29 13:12+0000 Last-Translator: Urien Desterres Language-Team: French MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n > 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: fr Voulez-vous vraiment fermer tous les programmes et redémarrer l'ordinateur ?Voulez-vous vraiment fermer tous les programmes et éteindre l'ordinateur ?AnnulerSaisissez votre mot de passeSaisissez votre nom d'utilisateurÉchec de l'authentificationLa session n'a pas pu démarrerSession d'invitéMettre en veille prolongéeContraste élevéMot de passe incorrect, veuillez réessayerGrande policeSe connecterClavier virtuelAutreAutre...RedémarrerRedémarrer...ÉteindreÉteindre...Mettre en veilleDéverrouillerlightdm-gtk-greeter-2.0.5/po/en_AU.po0000664000175000017500000000625013253544112021330 0ustar00bluesabrebluesabre00000000000000# English (Australia) translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2014-03-15 22:04+0000\n" "Last-Translator: Jackson Doak \n" "Language-Team: English (Australia) \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: \n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Restart" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Are you sure you want to close all programs and restart the computer?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Shut Down" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" "Are you sure you want to close all programs and shut down the computer?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Unlock" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Log In" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Failed to start session" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Other" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Guest Session" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Incorrect password, please try again" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Failed to authenticate" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Other..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Suspend" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hibernate" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Restart..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Shut Down..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Large Font" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "High Contrast" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "On Screen Keyboard" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Cancel" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Enter your username" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Enter your password" lightdm-gtk-greeter-2.0.5/po/eo.gmo0000664000175000017500000000223513253544623021116 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  H  "-(< es {   Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:39+0000 Last-Translator: Sean Davis Language-Team: Esperanto MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: eo Ĉu vi certe volas fermi ĉiujn programojn kaj restartigi la komputilon?NuligiAŭtentigado fiaskisStarto de seanco fiaskisPasivumigiAlta kontrastoMalĝusta pasvorto, bonvolu provi denoveGranda tiparoAlia...RestartigiRestartigi...Paŭzigilightdm-gtk-greeter-2.0.5/po/sr.po0000664000175000017500000000671013253544112020766 0ustar00bluesabrebluesabre00000000000000# Serbian translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # Мирослав Николић , 2011. msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:39+0000\n" "Last-Translator: Мирослав Николић \n" "Language-Team: Launchpad Serbian Translators\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && " "n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: sr\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Поново покрени" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Да ли сте сигурни да желите да затворите све програме и да поново покренете " "рачунар?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Нисам успео да покренем сесију" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Неисправна лозинка, молим пробајте опет" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Нисам успео да потврдим идентитет" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Остали..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Обустави" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Замрзни" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Поново покрени..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Већи словни ликови" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Велики контраст" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Откажи" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/ru.po0000664000175000017500000000727413253544112020776 0ustar00bluesabrebluesabre00000000000000# Russian translation for lightdm # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2015-02-09 11:29+0000\n" "Last-Translator: Andrew P. \n" "Language-Team: Russian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && " "n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: ru\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Перезагрузить" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Вы действительно хотите закрыть все приложения и перезагрузить компьютер?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Выключить" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" "Вы действительно хотите закрыть все приложения и выключить компьютер?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Разблокировать" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Войти" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Не удалось запустить сеанс" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Другой пользователь" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Гостевой сеанс" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Неверный пароль, попробуйте ввести ещё раз" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Не удалось выполнить вход" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Другие..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Ждущий режим" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Спящий режим" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Перезагрузить..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Выключить…" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Крупный шрифт" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Высокая контрастность" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Экранная клавиатура" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Отмена" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Введите ваш логин" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Введите ваш пароль" lightdm-gtk-greeter-2.0.5/po/sv.gmo0000664000175000017500000000341713253544623021146 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  H>I %% K X b"p          Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2014-03-16 17:31+0000 Last-Translator: Gunnar Hjalmarsson Language-Team: Swedish MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: sv Är du säker på att du vill stänga alla program och starta om datorn?Är du säker på att du vill stänga alla program och stänga av datorn?AvbrytAnge ditt lösenordAnge ditt användarnamnMisslyckades med att autentiseraMisslyckades med att starta sessionenGästsessionVilolägeHög kontrastFelaktigt lösenord, försök igenStort typsnittLogga inSkärmtangentbordAnnanAnnat...Starta omStarta om...Stäng avStäng av...VäntelägeLås upplightdm-gtk-greeter-2.0.5/po/fi.gmo0000664000175000017500000000347413253544623021117 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  OJG2 P^g#w  # /     Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2014-03-20 01:29+0000 Last-Translator: Pasi Lallinaho Language-Team: Finnish MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: fi Haluatko todella sulkea kaikki ohjelmat ja käynnistää tietokoneen uudelleen?Haluatko varmasti lopettaa kaikki sovellukset ja sammuttaa tietokoneen?PeruSyötä salasanasiSyötä käyttäjänimesiTunnistautuminen epäonnistuiIstunnon aloitus epäonnistuiVierasistuntoLepotilaSuuri kontrastiVäärä salasana, yritä uudelleenSuuri kirjasinKirjaudu sisäänNäyttönäppäimistöMuu...Muu…Käynnistä uudelleenKäynnistä uudelleen...SammutaSammuta…ValmiustilaAvaa lukituslightdm-gtk-greeter-2.0.5/po/uk.gmo0000664000175000017500000000271213253544623021132 0ustar00bluesabrebluesabre00000000000000 | E!gn  $  ~[+n1'Y`z  Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontRestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:41+0000 Last-Translator: brabadu Language-Team: Ukrainian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: uk Ви дійсно бажаєте закрити всі програми та перезавантажити комп'ютер?СкасуватиПомилка аутентифікаціїНе вдалось запустити сесіюРежим снуВисока контрастністьНеправильний пароль. Будь ласка, спробуйте зновуВеликий шрифтПерезапуститиПерезапустити...Призупинитиlightdm-gtk-greeter-2.0.5/po/uk.po0000664000175000017500000000645113253544112020763 0ustar00bluesabrebluesabre00000000000000# Ukrainian translation for lightdm # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:41+0000\n" "Last-Translator: brabadu \n" "Language-Team: Ukrainian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && " "n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: uk\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Перезапустити" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "Ви дійсно бажаєте закрити всі програми та перезавантажити комп'ютер?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Не вдалось запустити сесію" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Неправильний пароль. Будь ласка, спробуйте знову" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Помилка аутентифікації" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Призупинити" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Режим сну" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Перезапустити..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Великий шрифт" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Висока контрастність" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Скасувати" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/en@quot.header0000644000175000017500000000226313243246351022567 0ustar00bluesabrebluesabre00000000000000# All this catalog "translates" are quotation characters. # The msgids must be ASCII and therefore cannot contain real quotation # characters, only substitutes like grave accent (0x60), apostrophe (0x27) # and double quote (0x22). These substitutes look strange; see # http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html # # This catalog translates grave accent (0x60) and apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019). # It also translates pairs of apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019) # and pairs of quotation mark (0x22) to # left double quotation mark (U+201C) and right double quotation mark (U+201D). # # When output to an UTF-8 terminal, the quotation characters appear perfectly. # When output to an ISO-8859-1 terminal, the single quotation marks are # transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to # grave/acute accent (by libiconv), and the double quotation marks are # transliterated to 0x22. # When output to an ASCII terminal, the single quotation marks are # transliterated to apostrophes, and the double quotation marks are # transliterated to 0x22. # lightdm-gtk-greeter-2.0.5/po/km.gmo0000664000175000017500000000344513253544623021126 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  i)0'f!03  Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:40+0000 Last-Translator: Lionel Le Folgoc Language-Team: Khmer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=1; plural=0; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: តើ​អ្នក​ប្រាកដ​ជា​ចង់​បិទ​កម្មវិធី​ទាំងអស់​ ហើយ​ចាប់ផ្ដើម​កុំព្យូទ័រ​ឡើង​វិញ​ឬ ?បោះបង់បាន​បរាជ័យ​ក្នុងការ​ផ្ទៀងផ្ទាត់​ភាព​ត្រឹមត្រូវបាន​បរាជ័យ​ក្នុង​ការ​ចាប់ផ្ដើម​សម័យសម្ងំកម្រិត​ពណ៌​ខ្ពស់ពាក្យ​សម្ងាត់​មិន​ត្រឹមត្រូវ សូម​ព្យាយាម​ម្ដង​ទៀតពុម្ពអក្សរ​ធំផ្សេង​​ទៀត...ចាប់ផ្ដើម​ឡើងវិញចាប់ផ្ដើម​ឡើងវិញ...ផ្អាកlightdm-gtk-greeter-2.0.5/po/ms.gmo0000664000175000017500000000224513253544623021133 0ustar00bluesabrebluesabre00000000000000HEI  $   )18D (2#D hrz   Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2014-01-24 21:03+0000 Last-Translator: abuyop Language-Team: Malay MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: ms Anda pasti ingin menutup semua perisian dan mulakan semula komputer?BatalGagal sahihkanGagal mulakan sesiHibernasiBeza Jelas TinggiKata laluan salah, cuba sekali lagiFon BesarLain...Mulakan SemulaMula Semula...TangguhBukalightdm-gtk-greeter-2.0.5/po/ja.po0000664000175000017500000000613513253544112020735 0ustar00bluesabrebluesabre00000000000000# Japanese translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2014-06-01 13:07+0000\n" "Last-Translator: Kentaro Kazuhama \n" "Language-Team: Japanese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: ja\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "再起動" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "本当にすべてのプログラムを終了し、コンピューターを再起動しますか?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "セッションの開始に失敗しました" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "不正なパスワードです。もう一度入力してください" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "認証に失敗しました" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "その他..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "サスペンド" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "ハイバネート" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "再起動..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "大きいフォント" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "ハイコントラスト" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "キャンセル" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/lv.gmo0000664000175000017500000000232313253544623021132 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  H7 R^%o     Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:41+0000 Last-Translator: Lionel Le Folgoc Language-Team: Latvian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n != 0 ? 1 : 2; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: lv Vai tiešām vēlaties aizvērt visas programmas un pārstartēt datoru?AtceltNeizdevās autentificētiesNeizdevās startēt sesijuIemidzinātAugsta kontrastaNepareiza parole, mēģiniet vēlreizLiels fontsCits...PārstartētPārstartēt...Iesnaudinātlightdm-gtk-greeter-2.0.5/po/ro.gmo0000664000175000017500000000165313253544623021136 0ustar00bluesabrebluesabre00000000000000\ E  + 3>FQ i s }   Are you sure you want to close all programs and restart the computer?CancelHibernateLarge FontRestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:41+0000 Last-Translator: Lionel Le Folgoc Language-Team: Romanian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=3; plural=(n == 1 ? 0: (((n % 100 > 19) || ((n % 100 == 0) && (n != 0))) ? 2: 1)); X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: ro Sigur doriți să închideți toate aplicațiile și să reporniți calculatorul?RenunțăHibernareFont mareReporneșteRepornire...Suspendarelightdm-gtk-greeter-2.0.5/po/sd.gmo0000664000175000017500000000227213253544623021122 0ustar00bluesabrebluesabre00000000000000 tEW^ u $  f(.3F z   Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateHibernateHigh ContrastIncorrect password, please try againLarge FontRestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:39+0000 Last-Translator: Lionel Le Folgoc Language-Team: Sindhi MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: sd توهان کي پڪ آهي ته توهان سڀ پروگرام بند ڪري ڪمپيوٽر کي ٻيهر شروع ڪرڻ گهرو ٿا؟رداجازت حاصل ڪرڻ ۾ ناڪامسمهاريوگھڻي ڪنٽراسٽغلط ڳجهو لفظ، ٻيهر ڪوشش ڪريووڏا اکرٻيهر چالوٻيهر شروع...روڪيوlightdm-gtk-greeter-2.0.5/po/zh_CN.gmo0000664000175000017500000000211213253544623021506 0ustar00bluesabrebluesabre00000000000000 | E!gn  $  9    (2 9C  Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontRestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:39+0000 Last-Translator: 朱涛 Language-Team: Chinese (Simplified) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=1; plural=0; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: 您确定要关闭所有程序并重新启动计算机？取消认证失败启动会话失败休眠高对比度密码不正确，请重试大字体重启重启...待机lightdm-gtk-greeter-2.0.5/po/gd.po0000664000175000017500000000624713253544112020741 0ustar00bluesabrebluesabre00000000000000# Gaelic; Scottish translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2014-09-10 14:42+0000\n" "Last-Translator: GunChleoc \n" "Language-Team: Gaelic; Scottish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=4; plural=(n==1 || n==11) ? 0 : (n==2 || n==12) ? 1 : " "(n > 2 && n < 20) ? 2 : 3;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: \n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Ath-thòisich" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "A bheil thu cinnteach gu bheil thu airson gach prògram a dhùnadh is an " "coimpiutair ath-thòiseachadh?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Thoir a' ghlas dheth" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Cha b' urrainn dhuinn an seisean a thòiseachadh" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Tha am facal-faire cearr, feuch ris a-rithist" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Dh'fhàillig an dearbhadh" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Eile..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Cuir dàil ann" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Dèan cadal-geamhraidh" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Ath-thòisich..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Cruth-clò mòr" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Iomsgaradh àrd" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Sguir dheth" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/nn.po0000664000175000017500000000540713253544112020757 0ustar00bluesabrebluesabre00000000000000# Norwegian Nynorsk translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2012-03-19 16:10+0000\n" "Last-Translator: FULL NAME \n" "Language-Team: Norwegian Nynorsk \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: nn\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/el.po0000664000175000017500000000642013253544112020740 0ustar00bluesabrebluesabre00000000000000# Greek translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:41+0000\n" "Last-Translator: Michael Kotsarinis \n" "Language-Team: Greek \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: el\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Επανεκκίνηση" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Είστε βέβαιοι ότι θέλετε να κλείσετε όλα τα προγράμματα και να " "επανεκκινήσετε τον υπολογιστή;" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Αποτυχία εκκίνησης της συνεδρίας" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Λανθασμένος κωδικός, παρακαλώ δοκιμάστε ξανά" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Αποτυχία ταυτοποίησης" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Αναμονή" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Αδρανοποίηση" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Επανεκκίνηση..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Μεγάλη γραμματοσειρά" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Υψηλή αντίθεση" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Ακύρωση" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/oc.gmo0000664000175000017500000000234113253544623021112 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  L9 Xc&t   Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:39+0000 Last-Translator: Cédric VALMARY (Tot en òc) Language-Team: Occitan (post 1500) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n > 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: Sètz segur que volètz quitar totes los programas e reamodar l'ordenador ?AnullarFracàs de l'autentificacionLa sesilha a pas pogut s'aviarIvernacionContraste elevatSenhal incorrècte, ensajatz tornarmaiGranda poliçaAutre...Tornar amodarTornar amodar...Metre en velhalightdm-gtk-greeter-2.0.5/po/bs.po0000664000175000017500000000643213253544112020747 0ustar00bluesabrebluesabre00000000000000# Bosnian translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2017-04-12 22:46+0000\n" "Last-Translator: Emir Beganović \n" "Language-Team: Bosnian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && " "n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: bs\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Ponovo pokreni" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Da li ste sigurni da želite da zatvorite sve programe i da ponovo pokrenete " "računar?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Ugasi" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" "Da li ste sigurni da želite da zatvorite sve programe i da ugasite računar?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Otključaj" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Prijavi se" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Neuspjelo pokretanje sesije" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Ostalo" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Sesija za goste" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Nepravilna lozinka, molimo pokušajte ponovno" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Provjera neuspješna" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Drugo..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Suspenduj" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hibernacija" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Ponovo pokreni..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Ugasi..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Veliki font" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Visoki kontrast" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Tastatura na ekranu" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Odustani" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Unesite svoje korisničko ime" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Unesite lozinku" lightdm-gtk-greeter-2.0.5/po/km.po0000664000175000017500000000715113253544112020751 0ustar00bluesabrebluesabre00000000000000# Khmer translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:40+0000\n" "Last-Translator: Lionel Le Folgoc \n" "Language-Team: Khmer \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: \n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "ចាប់ផ្ដើម​ឡើងវិញ" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "តើ​អ្នក​ប្រាកដ​ជា​ចង់​បិទ​កម្មវិធី​ទាំងអស់​ " "ហើយ​ចាប់ផ្ដើម​កុំព្យូទ័រ​ឡើង​វិញ​ឬ ?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "បាន​បរាជ័យ​ក្នុង​ការ​ចាប់ផ្ដើម​សម័យ" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "ពាក្យ​សម្ងាត់​មិន​ត្រឹមត្រូវ សូម​ព្យាយាម​ម្ដង​ទៀត" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "បាន​បរាជ័យ​ក្នុងការ​ផ្ទៀងផ្ទាត់​ភាព​ត្រឹមត្រូវ" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "ផ្សេង​​ទៀត..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "ផ្អាក" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "សម្ងំ" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "ចាប់ផ្ដើម​ឡើងវិញ..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "ពុម្ពអក្សរ​ធំ" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "កម្រិត​ពណ៌​ខ្ពស់" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "បោះបង់" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/be.gmo0000664000175000017500000000436313253544623021105 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  u& +7Hd'yX% E P]x     Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2014-03-16 10:11+0000 Last-Translator: Andrew P. Language-Team: Belarusian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2); X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: be Вы ўпэўнены што хочаце зачыніць усе праграмы і перазапусціць кампутар?Вы сапраўды жадаеце зачыніць усе праграмы і выключыць кампутар?АдмяніцьУвядзіце свой парольУвядзіце сваё імяПамылка аўтэнтыфікацыіНе атрымалася запусціць сэсіюГасцявая сесіяГібернацыяВысокая кантраснасцьНяправільны пароль, паспрабуйце ўвесці яшчэ разБуйны шрыфтУвайсціЭкранная клавіятураІншыяIншыя...ПеразапусціцьПеразагрузіць ...ВыключыцьВыключыць…Рэжым чаканняРазблакавацьlightdm-gtk-greeter-2.0.5/po/remove-potcdate.sin0000644000175000017500000000066013243246351023612 0ustar00bluesabrebluesabre00000000000000# Sed script that remove the POT-Creation-Date line in the header entry # from a POT file. # # The distinction between the first and the following occurrences of the # pattern is achieved by looking at the hold space. /^"POT-Creation-Date: .*"$/{ x # Test if the hold space is empty. s/P/P/ ta # Yes it was empty. First occurrence. Remove the line. g d bb :a # The hold space was nonempty. Following occurrences. Do nothing. x :b } lightdm-gtk-greeter-2.0.5/po/pl.gmo0000664000175000017500000000361013253544623021124 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  LD)G f  4):N` u     Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2014-03-17 16:53+0000 Last-Translator: Piotr Strębski Language-Team: Polish MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: pl Zakończyć działanie wszystkich programów i ponownie uruchomić komputer?Zakończyć działanie wszystkich programów i wyłączyć komputer?AnulujWprowadź hasłoWprowadź nazwę użytkownikaNie udało się uwierzytelnićNie udało się uruchomić sesjiSesja gościaZahibernujWysoki kontrastNieprawidłowe hasło. Proszę spróbować ponownie.Duża czcionkaZalogujKlawiatura ekranowaInneInny użytkownik...Uruchom ponownieUruchom ponownie...Wyłącz komputerWyłącz komputer...WstrzymajOdblokujlightdm-gtk-greeter-2.0.5/po/et.po0000664000175000017500000000627613253544112020761 0ustar00bluesabrebluesabre00000000000000# Estonian translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2015-01-16 09:40+0000\n" "Last-Translator: vaba \n" "Language-Team: Estonian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: et\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Taaskäivita" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Kas oled kindel, et tahad kõik programmid sulgeda ja arvuti taaskäivitada?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Lülita välja" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" "Kas oled kindel, et tahad kõik programmid sulgeda ja arvuti välja lülitada?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Lukusta lahti" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Logi sisse" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Sessiooni alustamine ebaõnnestus" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Teised" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Külalisseanss" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Vale parool, palun proovi uuesti!" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Autentimine ebaõnnestus" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Muu..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Uinak" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Talveuni" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Taaskäivitamine..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Väljalülitamine..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Suur kiri" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Kõrge kontrast" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Ekraaniklaviatuur" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Tühista" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Sisesta oma kasutajanimi" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Sisesta oma parool" lightdm-gtk-greeter-2.0.5/po/ja.gmo0000664000175000017500000000243413253544623021106 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  a-2`sE      Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2014-06-01 13:07+0000 Last-Translator: Kentaro Kazuhama Language-Team: Japanese MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=1; plural=0; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: ja 本当にすべてのプログラムを終了し、コンピューターを再起動しますか?キャンセル認証に失敗しましたセッションの開始に失敗しましたハイバネートハイコントラスト不正なパスワードです。もう一度入力してください大きいフォントその他...再起動再起動...サスペンドlightdm-gtk-greeter-2.0.5/po/zh_TW.po0000664000175000017500000000620413253544112021373 0ustar00bluesabrebluesabre00000000000000# Chinese (Traditional) translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2014-04-30 15:54+0000\n" "Last-Translator: Walter Cheuk \n" "Language-Team: Chinese (Traditional) \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: \n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "重新啟動" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "是否真的想關閉所有程式，並重新啟動電腦？" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "關機" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "是否真的想關閉所有程式，並關掉電腦？" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "解除鎖定" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "登入" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "未能啟動作業階段" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "其他" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "訪客作業階段" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "密碼不正確，請重試" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "身分核對失敗" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "其他..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "暫停" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "休眠" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "重新啟動..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "關機..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "大字型" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "高對比" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "螢幕鍵盤" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "取消" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "輸入您的使用者名稱" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "輸入您的密碼" lightdm-gtk-greeter-2.0.5/po/en@boldquot.header0000644000175000017500000000247113243246351023431 0ustar00bluesabrebluesabre00000000000000# All this catalog "translates" are quotation characters. # The msgids must be ASCII and therefore cannot contain real quotation # characters, only substitutes like grave accent (0x60), apostrophe (0x27) # and double quote (0x22). These substitutes look strange; see # http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html # # This catalog translates grave accent (0x60) and apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019). # It also translates pairs of apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019) # and pairs of quotation mark (0x22) to # left double quotation mark (U+201C) and right double quotation mark (U+201D). # # When output to an UTF-8 terminal, the quotation characters appear perfectly. # When output to an ISO-8859-1 terminal, the single quotation marks are # transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to # grave/acute accent (by libiconv), and the double quotation marks are # transliterated to 0x22. # When output to an ASCII terminal, the single quotation marks are # transliterated to apostrophes, and the double quotation marks are # transliterated to 0x22. # # This catalog furthermore displays the text between the quotation marks in # bold face, assuming the VT100/XTerm escape sequences. # lightdm-gtk-greeter-2.0.5/po/wae.po0000664000175000017500000000564513253544112021124 0ustar00bluesabrebluesabre00000000000000# Walser translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:39+0000\n" "Last-Translator: Lionel Le Folgoc \n" "Language-Team: Walser \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: \n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Niwštart" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "Alli programm gšliesse und de kompiuter niw štarte?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Falšes paṣword, versüečses numal" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Authentifizierig fãlgšlage" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Niwštart..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Grosi šrift" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Schtarčä kontrašt" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Abbräče" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/kk.po0000664000175000017500000000705213253544112020747 0ustar00bluesabrebluesabre00000000000000# Kazakh translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2017-05-02 05:01+0000\n" "Last-Translator: Baurzhan Muftakhidinov \n" "Language-Team: Kazakh \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: kk\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Қайта жүктеу" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Барлық бағдарламаларды жауып, компьютеріңізді қайта жүктеуді қалайсыз ба?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Сөндіру" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "Барлық бағдарламаларды жауып, компьютеріңізді сөндіруді қалайсыз ба?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Босату" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Жүйеге кіру" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Сеанс бастау мүмкін емес" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Басқа" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Қонақ сессиясы" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Пароль қате, қайта енгізіп көріңіз" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Кіру сәтсіз аяқталды" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Басқа..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Ұйықтату" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Гибернация" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Қайта жүктеу..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Сөндіру..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Үлкен қаріп" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Жоғары контраст" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Экрандағы пернетақта" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Бас тарту" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Пайдаланушы атыңызды енгізіңіз" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Пароліңізді енгізіңіз" lightdm-gtk-greeter-2.0.5/po/th.gmo0000664000175000017500000000332613253544623021130 0ustar00bluesabrebluesabre00000000000000HEI  $   )18EB$InX0<$?a   Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-10-16 07:31+0000 Last-Translator: Theppitak Karoonboonyanan Language-Team: Thai MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=1; plural=0; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: th คุณแน่ใจหรือไม่ว่าต้องการปิดโปรแกรมทั้งหมดแล้วเริ่มเปิดเครื่องใหม่?ยกเลิกยืนยันตัวบุคคลไม่สำเร็จเริ่มเปิดวาระไม่สำเร็จจำศีลเครื่องสีตัดกันรหัสผ่านไม่ถูกต้อง โปรดลองใหม่ตัวอักษรขนาดใหญ่อื่นๆ...เริ่มเปิดเครื่องใหม่เริ่มเปิดเครื่องใหม่...พักเครื่องปลดล็อคlightdm-gtk-greeter-2.0.5/po/zh_HK.po0000664000175000017500000000573213253544112021350 0ustar00bluesabrebluesabre00000000000000# Chinese (Hong Kong) translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-09-21 02:04+0000\n" "Last-Translator: Walter Cheuk \n" "Language-Team: Chinese (Hong Kong) \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: zh_HK\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "重新啟動" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "您確定要關閉所有程式，並重新啟動電腦？" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "無法啟動作業階段" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "密碼不正確，請重試" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "身分核證失敗" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "其它…" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "暫停" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "休眠" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "重新啟動..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "大字型" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "高對比" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "取消" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/es.gmo0000664000175000017500000000342213253544623021121 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  N8K$=QZ+i            Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2014-08-06 17:02+0000 Last-Translator: Adolfo Jayme Language-Team: Spanish MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: es ¿Está seguro de que quiere cerrar todos los programas y reiniciar el equipo?¿Está seguro de que quiere cerrar todos los programas y apagar el equipo?CancelarEscriba su contraseñaEscriba su nombre de usuarioFallo al autenticarFallo al iniciar sesiónSesión de invitadoHibernarContraste altoContraseña incorrecta, inténtelo de nuevoLetra grandeAccederTeclado en pantallaAlguien másOtros…ReiniciarReiniciar…ApagarApagar…SuspenderDesbloquearlightdm-gtk-greeter-2.0.5/po/eu.gmo0000664000175000017500000000224613253544623021126 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  G *4Dd v   Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:42+0000 Last-Translator: Lionel Le Folgoc Language-Team: Basque MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: eu Seguru programa guztiak itxi eta ordenagailua berrabiarazi nahi duzula?UtziEzin izan da autentifikatuSaioa hasteak huts egin duHibernatuKontraste altuaPasahitz okerra, saiatu berriroLetra-tipo handiaBeste bat...BerrabiaraziBerrabiarazi...Esekilightdm-gtk-greeter-2.0.5/po/bo.po0000664000175000017500000000535613253544112020747 0ustar00bluesabrebluesabre00000000000000# Tibetan translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2012-03-19 16:01+0000\n" "Last-Translator: FULL NAME \n" "Language-Team: Tibetan \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: bo\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/ar.gmo0000664000175000017500000000255113253544623021116 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  i  v :  #-C ^  Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:42+0000 Last-Translator: Lionel Le Folgoc Language-Team: Arabic MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=6; plural=n==0 ? 0 : n==1 ? 1 : n==2 ? 2 : n % 100 >= 3 && n % 100 <= 10 ? 3 : n % 100 >= 11 && n % 100 <= 99 ? 4 : 5; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: ar أمتأكد أنك ترغب في إغلاق كل البرامج وإعادة تشغيل الحاسوب؟إلغاءفشل في الإستيثاقفشل بدء الجلسةإسباتتباين عاليكلمة سر غير صحيحة، حاول مرة أخرىخط كبيرآخر...إعادة تشغيلأعِد التشغيل...تعليقlightdm-gtk-greeter-2.0.5/po/fr.po0000664000175000017500000000641213253544112020750 0ustar00bluesabrebluesabre00000000000000# French translation for lightdm # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2014-03-29 13:12+0000\n" "Last-Translator: Urien Desterres \n" "Language-Team: French \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: fr\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Redémarrer" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Voulez-vous vraiment fermer tous les programmes et redémarrer l'ordinateur ?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Éteindre" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" "Voulez-vous vraiment fermer tous les programmes et éteindre l'ordinateur ?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Déverrouiller" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Se connecter" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "La session n'a pas pu démarrer" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Autre" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Session d'invité" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Mot de passe incorrect, veuillez réessayer" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Échec de l'authentification" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Autre..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Mettre en veille" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Mettre en veille prolongée" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Redémarrer..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Éteindre..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Grande police" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Contraste élevé" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Clavier virtuel" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Annuler" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Saisissez votre nom d'utilisateur" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Saisissez votre mot de passe" lightdm-gtk-greeter-2.0.5/po/ko.gmo0000664000175000017500000000237313253544623021127 0ustar00bluesabrebluesabre00000000000000HEI  $   )18H%1 W eBo       Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-12-30 08:54+0000 Last-Translator: Kim Boram Language-Team: Korean MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=1; plural=0; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: ko 모든 프로그램을 닫고 컴퓨터를 다시 시작하겠습니까?취소인증할 수 없습니다.세션을 시작할 수 없습니다.최대 절전고대비암호가 올바르지 않습니다. 다시 입력해주십시오.큰 글꼴기타...다시 시작다시 시작...절전잠금 해제lightdm-gtk-greeter-2.0.5/po/th.po0000664000175000017500000000707213253544112020757 0ustar00bluesabrebluesabre00000000000000# Thai translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # Sira Nokyoongtong , 2011-2013. # Theppitak Karoonboonyanan , 2013. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-10-16 07:31+0000\n" "Last-Translator: Theppitak Karoonboonyanan \n" "Language-Team: Thai \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: th\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "เริ่มเปิดเครื่องใหม่" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "คุณแน่ใจหรือไม่ว่าต้องการปิดโปรแกรมทั้งหมดแล้วเริ่มเปิดเครื่องใหม่?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "ปลดล็อค" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "เริ่มเปิดวาระไม่สำเร็จ" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "รหัสผ่านไม่ถูกต้อง โปรดลองใหม่" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "ยืนยันตัวบุคคลไม่สำเร็จ" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "อื่นๆ..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "พักเครื่อง" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "จำศีลเครื่อง" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "เริ่มเปิดเครื่องใหม่..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "ตัวอักษรขนาดใหญ่" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "สีตัดกัน" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "ยกเลิก" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/ku.po0000664000175000017500000000602013253544112020753 0ustar00bluesabrebluesabre00000000000000# Kurdish translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:41+0000\n" "Last-Translator: Erdal Ronahi \n" "Language-Team: Kurdish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: ku\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Dîsdestpêkirin" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Bi rastî dixwazî hemû bernameyan bigirî û komputerê dîsa bidî destpêkirin?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Destpêkirina danişinê bi ser neket" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Nasnavê şaş, carekî din biceribîne" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Piştrastkirin bi ser neket" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Xew" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Xewa kûr" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Dîsdestpêkirin..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Curenivîsê mezin" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Dijberiya berz" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Betal" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/nl.po0000664000175000017500000000627613253544112020762 0ustar00bluesabrebluesabre00000000000000# Dutch translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2014-03-16 14:40+0000\n" "Last-Translator: Pjotr12345 \n" "Language-Team: Dutch \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: nl\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Herstarten" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Weet u zeker dat u alle programma's wil sluiten en de computer wil " "herstarten?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Afsluiten" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" "Weet u zeker dat u alle programma's wil sluiten en de computer wil afsluiten?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Ontgrendelen" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Aanmelden" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Sessie starten mislukt" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Overig" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Gastsessie" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Onjuist wachtwoord, probeer het a.u.b. opnieuw" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Authenticatie mislukt" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Overig…" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Pauzestand" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Slaapstand" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Herstarten…" #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Afsluiten…" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Groot lettertype" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Hoog contrast" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Toetsenbord-op-scherm" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Annuleren" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Voer uw gebruikersnaam in" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Voer uw wachtwoord in" lightdm-gtk-greeter-2.0.5/po/pt.po0000664000175000017500000000633013253544112020763 0ustar00bluesabrebluesabre00000000000000# Portuguese translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2014-03-18 10:16+0000\n" "Last-Translator: David Pires \n" "Language-Team: Portuguese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: pt\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Reiniciar" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Tem a certeza que deseja fechar todos os programas e reinicializar o " "computador?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Encerrar" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" "Tem a certeza que deseja fechar todos os programas e desligar o computador?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Desbloquear" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Iniciar sessão" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Falha ao iniciar a sessão" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Outro(s)" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Sessão de convidado" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Palavra passe incorreta, por favor tente novamente" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Falha ao autenticar" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Outro..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Suspender" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hibernar" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Reiniciar..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Encerrar..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Fonte Grande" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Alto Contraste" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Teclado no ecrã" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Cancelar" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Introduza o seu nome de utilizador" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Introduza a sua senha" lightdm-gtk-greeter-2.0.5/po/insert-header.sin0000644000175000017500000000124013243246351023241 0ustar00bluesabrebluesabre00000000000000# Sed script that inserts the file called HEADER before the header entry. # # At each occurrence of a line starting with "msgid ", we execute the following # commands. At the first occurrence, insert the file. At the following # occurrences, do nothing. The distinction between the first and the following # occurrences is achieved by looking at the hold space. /^msgid /{ x # Test if the hold space is empty. s/m/m/ ta # Yes it was empty. First occurrence. Read the file. r HEADER # Output the file's contents by reading the next line. But don't lose the # current line while doing this. g N bb :a # The hold space was nonempty. Following occurrences. Do nothing. x :b } lightdm-gtk-greeter-2.0.5/po/cs.po0000664000175000017500000000661413253544112020752 0ustar00bluesabrebluesabre00000000000000# Czech translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2018-03-09 21:56+0000\n" "Last-Translator: AsciiWolf \n" "Language-Team: Czech \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: cs\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "Varování: Stále je přihlášen %d uživatel." msgstr[1] "Varování: Stále je přihlášeno %d uživatelů." msgstr[2] "Varování: Stále je přihlášeno %d uživatelů." #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Restartovat" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "Opravdu chcete ukončit všechny programy a restartovat počítač?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Vypnout" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "Opravdu chcete ukončit všechny programy a vypnout počítač?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Odemknout" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Přihlásit se" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Chyba při startu sezení" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Jiný uživatel" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Sezení hosta" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Chybné heslo, zkuste to znovu prosím" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Ověření selhalo" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Jiný uživatel..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Uspat" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hibernovat" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Restartovat..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Vypnout..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Velké písmo" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Vysoký kontrast" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Klávesnice na obrazovce" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "Čtečka obrazovky" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Zrušit" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "Budiž" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Zadejte své uživatelské jméno" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Zadejte své heslo" lightdm-gtk-greeter-2.0.5/po/te.gmo0000664000175000017500000000310013253544623021113 0ustar00bluesabrebluesabre00000000000000 tEW^ u $  me18q }-0C  Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateHibernateHigh ContrastIncorrect password, please try againLarge FontRestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:39+0000 Last-Translator: Praveen Illa Language-Team: Telugu MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: te మీరు ఖచ్ఛితంగా అన్ని ప్రోగ్రాములను మూసివేసి కంప్యూటర్‌ని పునఃప్రారంభించాలనుకుంటున్నారా?రద్దుచేయిధృవీకరణ విఫలమైందిసుప్తావస్థఅధిక వర్ణ వ్యత్యాసముసంకేతపదం తప్పు, దయచేసి మరలా ప్రయత్నించండిపెద్ద ఫాంటుపునఃప్రారంభించుపునఃప్రారంభించు...తాత్కాలికంగా నిలిపివేయిlightdm-gtk-greeter-2.0.5/po/si.po0000664000175000017500000000536513253544112020762 0ustar00bluesabrebluesabre00000000000000# Sinhalese translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2012-03-19 16:10+0000\n" "Last-Translator: FULL NAME \n" "Language-Team: Sinhalese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: \n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/ca.po0000664000175000017500000000626113253544112020726 0ustar00bluesabrebluesabre00000000000000# Catalan translation for lightdm # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2017-09-15 08:17+0000\n" "Last-Translator: Davidmp \n" "Language-Team: Catalan \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: ca\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Reinicia" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "Segur que voleu tancar tots els programes i reiniciar l'ordinador?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Atura" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "Segur que voleu tancar tots els programes i aturar l'ordinador?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Desbloqueja" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Inicia la sessió" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Ha fallat l'inici de la sessió" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Altres" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Sessió de convidat" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "La contrasenya no és correcta, torneu-ho a provar" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Ha fallat l'autenticació" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Altres..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Suspèn" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hiberna" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Reinicia..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Atura..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Lletra gran" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Contrast alt" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Teclat a la pantalla" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Cancel·la" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Escriviu el nom d'usuari" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Escriviu la contrasenya" lightdm-gtk-greeter-2.0.5/po/en_AU.gmo0000664000175000017500000000336413253544623021506 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  EPG $ < J T$b         Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2014-03-15 22:04+0000 Last-Translator: Jackson Doak Language-Team: English (Australia) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlocklightdm-gtk-greeter-2.0.5/po/da.po0000664000175000017500000000641413253544112020727 0ustar00bluesabrebluesabre00000000000000# Danish translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2018-02-19 22:08+0000\n" "Last-Translator: scootergrisen \n" "Language-Team: Danish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: da\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "Advarsel: Der er stadig %d bruger logget ind." msgstr[1] "Advarsel: Der er stadig %d brugere logget ind." #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Genstart" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Er du sikker på, at du vil afslutte alle programmer og genstarte computeren?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Luk ned" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "Er du sikker på, du vil lukke alle programmer og slukke computeren?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Lås op" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Log ind" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Opstart af session mislykkedes" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Anden" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Gæstesession" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Forkert adgangskode, prøv venligst igen" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Kunne ikke godkende" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Anden..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Hvile" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Dvale" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Genstart..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Luk ned..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Stor skrifttype" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Høj kontrast" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Skærmtastatur" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "Skærmoplæser" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Annuller" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "OK" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Indtast dit brugernavn" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Indtast din adgangskode" lightdm-gtk-greeter-2.0.5/po/et.gmo0000664000175000017500000000342513253544623021125 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  L1N~!=LU!e         Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2015-01-16 09:40+0000 Last-Translator: vaba Language-Team: Estonian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: et Kas oled kindel, et tahad kõik programmid sulgeda ja arvuti taaskäivitada?Kas oled kindel, et tahad kõik programmid sulgeda ja arvuti välja lülitada?TühistaSisesta oma paroolSisesta oma kasutajanimiAutentimine ebaõnnestusSessiooni alustamine ebaõnnestusKülalisseanssTalveuniKõrge kontrastVale parool, palun proovi uuesti!Suur kiriLogi sisseEkraaniklaviatuurTeisedMuu...TaaskäivitaTaaskäivitamine...Lülita väljaVäljalülitamine...UinakLukusta lahtilightdm-gtk-greeter-2.0.5/po/uz.gmo0000664000175000017500000000266113253544623021154 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  x&K<5XK ao  Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:41+0000 Last-Translator: Akmal Xushvaqov Language-Team: Uzbek MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=1; plural=0; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: uz Ҳамма дастурларни ёпишга ва компьютерни ўчириб-ёқишга розимисиз?Бекор қилишТасдиқдан ўтиш муваффақиятсиз якунландиСеансни ишга тушириб бўлмадиУйқуга кетишЮқори контрастМахфий сўз хато, илтимос, қайтадан уриниб кўрингКатта шрифтБошқа...Ўчириб-ёқишЎчириб-ёқишКутиш усулиlightdm-gtk-greeter-2.0.5/po/Makevars0000664000175000017500000000660713243241724021505 0ustar00bluesabrebluesabre00000000000000# Makefile variables for PO directory in any package using GNU gettext. # Usually the message domain is the same as the package name. DOMAIN = $(PACKAGE) # These two variables depend on the location of this directory. subdir = po top_builddir = .. # These options get passed to xgettext. XGETTEXT_OPTIONS = --from-code=UTF-8 --keyword=_ --keyword=N_ --keyword=C_:1c,2 --keyword=NC_:1c,2 --keyword=g_dngettext:2,3 # This is the copyright holder that gets inserted into the header of the # $(DOMAIN).pot file. Set this to the copyright holder of the surrounding # package. (Note that the msgstr strings, extracted from the package's # sources, belong to the copyright holder of the package.) Translators are # expected to transfer the copyright for their translations to this person # or entity, or to disclaim their copyright. The empty string stands for # the public domain; in this case the translators are expected to disclaim # their copyright. COPYRIGHT_HOLDER = Rosetta Contributors and Canonical Ltd # This tells whether or not to prepend "GNU " prefix to the package # name that gets inserted into the header of the $(DOMAIN).pot file. # Possible values are "yes", "no", or empty. If it is empty, try to # detect it automatically by scanning the files in $(top_srcdir) for # "GNU packagename" string. PACKAGE_GNU = # This is the email address or URL to which the translators shall report # bugs in the untranslated strings: # - Strings which are not entire sentences, see the maintainer guidelines # in the GNU gettext documentation, section 'Preparing Strings'. # - Strings which use unclear terms or require additional context to be # understood. # - Strings which make invalid assumptions about notation of date, time or # money. # - Pluralisation problems. # - Incorrect English spelling. # - Incorrect formatting. # It can be your email address, or a mailing list address where translators # can write to without being subscribed, or the URL of a web page through # which the translators can contact you. MSGID_BUGS_ADDRESS = # This is the list of locale categories, beyond LC_MESSAGES, for which the # message catalogs shall be used. It is usually empty. EXTRA_LOCALE_CATEGORIES = # This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt' # context. Possible values are "yes" and "no". Set this to yes if the # package uses functions taking also a message context, like pgettext(), or # if in $(XGETTEXT_OPTIONS) you define keywords with a context argument. USE_MSGCTXT = no # These options get passed to msgmerge. # Useful options are in particular: # --previous to keep previous msgids of translated messages, # --quiet to reduce the verbosity. MSGMERGE_OPTIONS = # These options get passed to msginit. # If you want to disable line wrapping when writing PO files, add # --no-wrap to MSGMERGE_OPTIONS, XGETTEXT_OPTIONS, and # MSGINIT_OPTIONS. MSGINIT_OPTIONS = # This tells whether or not to regenerate a PO file when $(DOMAIN).pot # has changed. Possible values are "yes" and "no". Set this to no if # the POT file is checked in the repository and the version control # program ignores timestamps. PO_DEPENDS_ON_POT = no # This tells whether or not to forcibly update $(DOMAIN).pot and # regenerate PO files on "make dist". Possible values are "yes" and # "no". Set this to no if the POT file and PO files are maintained # externally. DIST_DEPENDS_ON_UPDATE_PO = no lightdm-gtk-greeter-2.0.5/po/fy.gmo0000664000175000017500000000224713253544623021134 0ustar00bluesabrebluesabre00000000000000 | E!gn  $  V 3:#Im }   Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontRestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:39+0000 Last-Translator: Sense Egbert Hofstede Language-Team: Frisian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: Witte jo it seker dat jo alle programma's wol slute en de kompjûter opnij wol starte?ÔfbrekkeIdentifisearje mislearreStarten fan sesje mislearreSliepeHeech kontrastFerkeard wachtwurd, besykje nochrisGrut lettertypeOpnij starteOpnij starte...Ûnderbrekkelightdm-gtk-greeter-2.0.5/po/ta.po0000664000175000017500000000667013253544112020753 0ustar00bluesabrebluesabre00000000000000# Tamil translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:39+0000\n" "Last-Translator: Barneedhar \n" "Language-Team: Tamil \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: ta\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "மீள்துவக்கு" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "அனைத்து நிரல்களையும் மூடி கணினியை மீள்துவக்கம் செய்ய உறுதியாக உள்ளீர்களா?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "உட்புகுதல் தோல்வியடைந்தது" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "தவறான கடவுச்சொல்,மீண்டும் முயற்சிக்கவும்" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "சரிபார்க்க இயலவில்லை" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "மற்றவை..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "ஒத்திப்போடு" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "இடை உறக்கம்" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "மீள்துவக்கு" #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "தடிமஎழுத்துரு" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "உயர் மாறுபாடு" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "ரத்துசெய்" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/bn.gmo0000664000175000017500000000312113253544623021105 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  pD9;(;Sd"% 1  Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:41+0000 Last-Translator: Lionel Le Folgoc Language-Team: Bengali MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: bn আপনি কি নিশ্চিত আপনি সব প্রোগ্রাম বন্ধ করে কম্পিউটার পুনরায় আরম্ভ করতে চান?বাতিলপরিচয় নিশ্চিতকরণে ব্যর্থসেশন চালু করতে ব্যর্থনিদ্রিত অবস্থায় রাখুনউচ্চ বৈসাদৃশ্যভুল পাসওয়ার্ড, আবার চেষ্টা করুনবড় ফন্টঅন্যান্য...পুনরায় আরম্ভপুনরায় আরম্ভ...স্থগিত করুনlightdm-gtk-greeter-2.0.5/po/el.gmo0000664000175000017500000000266213253544623021117 0ustar00bluesabrebluesabre00000000000000 | E!gn  $  F)U=S'Fn  Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontRestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:41+0000 Last-Translator: Michael Kotsarinis Language-Team: Greek MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: el Είστε βέβαιοι ότι θέλετε να κλείσετε όλα τα προγράμματα και να επανεκκινήσετε τον υπολογιστή;ΑκύρωσηΑποτυχία ταυτοποίησηςΑποτυχία εκκίνησης της συνεδρίαςΑδρανοποίησηΥψηλή αντίθεσηΛανθασμένος κωδικός, παρακαλώ δοκιμάστε ξανάΜεγάλη γραμματοσειράΕπανεκκίνησηΕπανεκκίνηση...Αναμονήlightdm-gtk-greeter-2.0.5/po/br.gmo0000664000175000017500000000346613253544623021125 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  U/Q!0R e o0|       +     Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2015-04-06 05:30+0000 Last-Translator: Denis Language-Team: Breton MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n > 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: br Ha fellout a ra deoc'h serriñ an holl c'houlevioù hag adloc'hañ hoc'h urzhiataer ?Ha fellout a ra deoc'h serriñ an holl c'houlevioù ha lazhañ hoc'h urzhiataer ?NullañBizskrivit ho ker-tremenBizskrivit hoc'h anv arveriadC'hwitadenn war an dilesaC'hwitadenn war loc'hañ an estezEstez ar c'houviadGoañviñDargemm uhelN'eo ket mat ar ger-tremen, roit anezhañ en-droNodrezh brasKennaskañKlavier war ar skrammTraoù allAll...Adloc'hañAdloc'hañ...LazhañLazhañ...Lakaat da gousketDibrennañlightdm-gtk-greeter-2.0.5/po/ca.gmo0000664000175000017500000000341713253544623021101 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  B>? 7K S2`         Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2017-09-15 08:17+0000 Last-Translator: Davidmp Language-Team: Catalan MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: ca Segur que voleu tancar tots els programes i reiniciar l'ordinador?Segur que voleu tancar tots els programes i aturar l'ordinador?Cancel·laEscriviu la contrasenyaEscriviu el nom d'usuariHa fallat l'autenticacióHa fallat l'inici de la sessióSessió de convidatHibernaContrast altLa contrasenya no és correcta, torneu-ho a provarLletra granInicia la sessióTeclat a la pantallaAltresAltres...ReiniciaReinicia...AturaAtura...SuspènDesbloquejalightdm-gtk-greeter-2.0.5/po/en_GB.po0000664000175000017500000000641513253544112021316 0ustar00bluesabrebluesabre00000000000000# English (United Kingdom) translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2018-03-08 01:10+0000\n" "Last-Translator: Andi Chandler \n" "Language-Team: English (United Kingdom) \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: \n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "Warning: There is still %d user logged in." msgstr[1] "Warning: There are still %d users logged in." #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Restart" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Are you sure you want to close all programs and restart the computer?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Shut Down" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" "Are you sure you want to close all programs and shut down the computer?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Unlock" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Log In" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Failed to start session" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Other" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Guest Session" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Incorrect password, please try again" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Failed to authenticate" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Other..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Suspend" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hibernate" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Restart..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Shut Down..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Large Font" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "High Contrast" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "On Screen Keyboard" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "Screen Reader" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Cancel" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "OK" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Enter your username" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Enter your password" lightdm-gtk-greeter-2.0.5/po/id.gmo0000664000175000017500000000215513253544623021110 0ustar00bluesabrebluesabre00000000000000 | E!gn  $  D  =HWf  Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontRestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:41+0000 Last-Translator: Andika Triwidada Language-Team: Indonesian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=1; plural=0; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: id Anda yakin akan menutup semua program dan menyalakan ulang komputer?BatalOtentikasi gagalGagal memulai sesiHibernasiKontras TinggiSandi salah, silakan coba lagiFont BesarNyalakan UlangMulai ulang...Suspenlightdm-gtk-greeter-2.0.5/po/en_CA.po0000664000175000017500000000574613253544112021317 0ustar00bluesabrebluesabre00000000000000# English (Canada) translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:39+0000\n" "Last-Translator: Lionel Le Folgoc \n" "Language-Team: English (Canada) \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: \n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Restart" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Are you sure you want to close all programs and restart the computer?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Failed to start session" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Incorrect password, please try again" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Failed to authenticate" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Other..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Suspend" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hibernate" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Restart..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Large Font" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "High Contrast" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Cancel" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/hu.gmo0000664000175000017500000000353113253544623021127 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  WJO *#Ei |  "/? O     Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2014-11-12 15:06+0000 Last-Translator: Gabor Kelemen Language-Team: Hungarian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: hu Biztos benne, hogy bezárja az összes programot, és újraindítja a számítógépet?Biztos, hogy bezárja az összes programot, és kikapcsolja a számítógépet?MégseAdja meg jelszavátAdja meg felhasználónevétA hitelesítés sikertelenA munkamenet indítása meghiúsultVendég munkamenetHibernálásNagy kontrasztHibás jelszó, próbálja újraNagy betűméretBejelentkezésKépernyő-billentyűzetEgyébMás…ÚjraindításÚjraindítás…LeállításLeállítás…FelfüggesztésFeloldáslightdm-gtk-greeter-2.0.5/po/nl.gmo0000664000175000017500000000342513253544623021126 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  N4M  ! 8 C N.\             Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2014-03-16 14:40+0000 Last-Translator: Pjotr12345 Language-Team: Dutch MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: nl Weet u zeker dat u alle programma's wil sluiten en de computer wil herstarten?Weet u zeker dat u alle programma's wil sluiten en de computer wil afsluiten?AnnulerenVoer uw wachtwoord inVoer uw gebruikersnaam inAuthenticatie misluktSessie starten misluktGastsessieSlaapstandHoog contrastOnjuist wachtwoord, probeer het a.u.b. opnieuwGroot lettertypeAanmeldenToetsenbord-op-schermOverigOverig…HerstartenHerstarten…AfsluitenAfsluiten…PauzestandOntgrendelenlightdm-gtk-greeter-2.0.5/po/Rules-quot0000644000175000017500000000423313243246351022004 0ustar00bluesabrebluesabre00000000000000# This file, Rules-quot, can be copied and used freely without restrictions. # Special Makefile rules for English message catalogs with quotation marks. DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot .SUFFIXES: .insert-header .po-update-en en@quot.po-create: $(MAKE) en@quot.po-update en@boldquot.po-create: $(MAKE) en@boldquot.po-update en@quot.po-update: en@quot.po-update-en en@boldquot.po-update: en@boldquot.po-update-en .insert-header.po-update-en: @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \ if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \ tmpdir=`pwd`; \ echo "$$lang:"; \ ll=`echo $$lang | sed -e 's/@.*//'`; \ LC_ALL=C; export LC_ALL; \ cd $(srcdir); \ if $(MSGINIT) $(MSGINIT_OPTIONS) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null \ | $(SED) -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | \ { case `$(MSGFILTER) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-8] | 0.1[0-8].*) \ $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed \ ;; \ *) \ $(MSGFILTER) `echo $$lang | sed -e 's/.*@//'` \ ;; \ esac } 2>/dev/null > $$tmpdir/$$lang.new.po \ ; then \ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ rm -f $$tmpdir/$$lang.new.po; \ else \ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ :; \ else \ echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ exit 1; \ fi; \ fi; \ else \ echo "creation of $$lang.po failed!" 1>&2; \ rm -f $$tmpdir/$$lang.new.po; \ fi en@quot.insert-header: insert-header.sin sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header en@boldquot.insert-header: insert-header.sin sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header mostlyclean: mostlyclean-quot mostlyclean-quot: rm -f *.insert-header lightdm-gtk-greeter-2.0.5/po/cs.gmo0000664000175000017500000000422513253544623021121 0ustar00bluesabrebluesabre00000000000000%PEQG% = K U$c     W^C ?P!  &$ KYho        Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOKOn Screen KeyboardOtherOther...RestartRestart...Screen ReaderShut DownShut Down...SuspendUnlockWarning: There is still %d user logged in.Warning: There are still %d users logged in.Project-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2018-03-09 21:56+0000 Last-Translator: AsciiWolf Language-Team: Czech MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: cs Opravdu chcete ukončit všechny programy a restartovat počítač?Opravdu chcete ukončit všechny programy a vypnout počítač?ZrušitZadejte své hesloZadejte své uživatelské jménoOvěření selhaloChyba při startu sezeníSezení hostaHibernovatVysoký kontrastChybné heslo, zkuste to znovu prosímVelké písmoPřihlásit seBudižKlávesnice na obrazovceJiný uživatelJiný uživatel...RestartovatRestartovat...Čtečka obrazovkyVypnoutVypnout...UspatOdemknoutVarování: Stále je přihlášen %d uživatel.Varování: Stále je přihlášeno %d uživatelů.Varování: Stále je přihlášeno %d uživatelů.lightdm-gtk-greeter-2.0.5/po/oc.po0000664000175000017500000000606013253544112020741 0ustar00bluesabrebluesabre00000000000000# Occitan (post 1500) translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:39+0000\n" "Last-Translator: Cédric VALMARY (Tot en òc) \n" "Language-Team: Occitan (post 1500) \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: \n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Tornar amodar" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Sètz segur que volètz quitar totes los programas e reamodar l'ordenador ?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "La sesilha a pas pogut s'aviar" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Senhal incorrècte, ensajatz tornarmai" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Fracàs de l'autentificacion" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Autre..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Metre en velha" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Ivernacion" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Tornar amodar..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Granda poliça" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Contraste elevat" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Anullar" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/bn.po0000664000175000017500000000662413253544112020745 0ustar00bluesabrebluesabre00000000000000# Bengali translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:41+0000\n" "Last-Translator: Lionel Le Folgoc \n" "Language-Team: Bengali \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: bn\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "পুনরায় আরম্ভ" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "আপনি কি নিশ্চিত আপনি সব প্রোগ্রাম বন্ধ করে কম্পিউটার পুনরায় আরম্ভ করতে চান?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "সেশন চালু করতে ব্যর্থ" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "ভুল পাসওয়ার্ড, আবার চেষ্টা করুন" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "পরিচয় নিশ্চিতকরণে ব্যর্থ" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "অন্যান্য..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "স্থগিত করুন" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "নিদ্রিত অবস্থায় রাখুন" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "পুনরায় আরম্ভ..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "বড় ফন্ট" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "উচ্চ বৈসাদৃশ্য" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "বাতিল" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/ro.po0000664000175000017500000000571213253544112020763 0ustar00bluesabrebluesabre00000000000000# Romanian translation for lightdm # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:41+0000\n" "Last-Translator: Lionel Le Folgoc \n" "Language-Team: Romanian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n == 1 ? 0: (((n % 100 > 19) || ((n % 100 " "== 0) && (n != 0))) ? 2: 1));\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: ro\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Repornește" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Sigur doriți să închideți toate aplicațiile și să reporniți calculatorul?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Suspendare" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hibernare" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Repornire..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Font mare" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Renunță" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/lt.po0000664000175000017500000000673613253544112020771 0ustar00bluesabrebluesabre00000000000000# Lithuanian translation for lightdm # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2018-03-05 10:19+0000\n" "Last-Translator: Moo \n" "Language-Team: Lithuanian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && " "(n%100<10 || n%100>=20) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: lt\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "Įspėjimas: Yra vis dar prisijungęs %d naudotojas." msgstr[1] "Įspėjimas: Yra vis dar prisijungę %d naudotojai." msgstr[2] "Įspėjimas: Yra vis dar prisijungę %d naudotojų." #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Paleisti iš naujo" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Ar tikrai norite išjungti visas programas ir paleisti kompiuterį iš naujo?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Išjungti" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "Ar tikrai norite užverti visas programas ir išjungti kompiuterį?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Atrakinti" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Prisijungti" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Nepavyko paleisti seanso" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Kita" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Svečio seansas" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Neteisingas slaptažodis, bandykite dar kartą" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Nepavyko nustatyti tapatybės" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Kitas..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Pristabdyti" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Užmigdyti" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Paleisti iš naujo..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Išjungti..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Didelis šriftas" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Didelis kontrastas" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Klaviatūra ekrane" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "Ekrano skaityklė" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Atsisakyti" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "Gerai" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Įrašykite naudotojo vardą" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Įrašykite slaptažodį" lightdm-gtk-greeter-2.0.5/po/pt_BR.po0000664000175000017500000000602313253544112021345 0ustar00bluesabrebluesabre00000000000000# Brazilian Portuguese translation for lightdm # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:39+0000\n" "Last-Translator: Lionel Le Folgoc \n" "Language-Team: Brazilian Portuguese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: pt_BR\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Reiniciar" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Você tem certeza de que deseja fechar todos os programas e reiniciar o " "computador?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Falhou ao iniciar sessão" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Senha incorreta, por favor tente novamente" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Falhou ao autenticar" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Outro..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Suspender" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hibernar" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Reiniciar…" #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Fonte grande" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Contraste alto" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Cancelar" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/sk.po0000664000175000017500000000640713253544112020762 0ustar00bluesabrebluesabre00000000000000# Slovak translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2016-07-17 14:37+0000\n" "Last-Translator: Dusan Kazik \n" "Language-Team: Slovak \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 1 : (n>=2 && n<=4) ? 2 : 0;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: sk\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Reštartovať" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Ste si istý, že chcete zavrieť všetky programy a reštartovať počítač?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Vypnúť" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "Ste si istý, že chcete zavrieť všetky programy a vypnúť počítač?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Odomknúť" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Prihlásiť sa" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Zlyhalo spustenie relácie" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Iný" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Hosťovská relácia" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Nesprávne heslo. Prosím, skúste to znovu." #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Zlyhalo overenie totožnosti" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Niekto iný..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Uspať" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hibernovať" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Reštartovať..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Vypnúť..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Veľké písmo" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Vysoký kontrast" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Klávesnica na obrazovke" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Zrušiť" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Zadajte vaše používateľské meno" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Zadajte vaše heslo" lightdm-gtk-greeter-2.0.5/po/ca@valencia.gmo0000664000175000017500000000234413253544623022702 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  H 8X `1m    Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:42+0000 Last-Translator: David Planella Language-Team: Catalan (Valencian) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: Esteu segur que voleu tancar tots els programes i reiniciar l'ordinador?Cancel·laHa fallat l'autenticacióHa fallat l'inici de la sessióHibernaContrast altLa contrasenya és incorrecta, torneu a provar-hoMida de lletra granAltres...ReiniciaReinicia...Para temporalmentlightdm-gtk-greeter-2.0.5/po/ms.po0000664000175000017500000000570313253544112020762 0ustar00bluesabrebluesabre00000000000000# Malay translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2014-01-24 21:03+0000\n" "Last-Translator: abuyop \n" "Language-Team: Malay \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: ms\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Mulakan Semula" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "Anda pasti ingin menutup semua perisian dan mulakan semula komputer?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Buka" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Gagal mulakan sesi" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Kata laluan salah, cuba sekali lagi" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Gagal sahihkan" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Lain..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Tangguh" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hibernasi" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Mula Semula..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Fon Besar" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Beza Jelas Tinggi" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Batal" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/nn.gmo0000664000175000017500000000072113253544623021124 0ustar00bluesabrebluesabre00000000000000$,89Project-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2012-03-19 16:10+0000 Last-Translator: FULL NAME Language-Team: Norwegian Nynorsk MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: nn lightdm-gtk-greeter-2.0.5/po/ug.gmo0000664000175000017500000000251113253544623021123 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  c ;7N $'  ! <  Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:41+0000 Last-Translator: Lionel Le Folgoc Language-Team: Uyghur MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=1; plural=0; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: ھەممە پروگراممىنى ئېتىپ كومپيۇتېرنى قايتا قوزغامسىز؟ۋاز كەچسالاھىيەت دەلىللەش مەغلۇپ بولدىئەڭگىمەنى باشلاش مەغلۇپ بولدىئۈچەكيۇقىرى ئاق-قارىلىقىئىم خاتا، قايتا سىناڭچوڭ خەت نۇسخىسىباشقا…قايتا قوزغاتقايتا قوزغات…توڭلاتlightdm-gtk-greeter-2.0.5/po/hr.po0000664000175000017500000000575113253544112020757 0ustar00bluesabrebluesabre00000000000000# Croatian translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # gogo , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:42+0000\n" "Last-Translator: gogo \n" "Language-Team: Croatian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && " "n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: hr\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Ponovno pokretanje" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Jeste li sigurni da želite zatvoriti sve programe i ponovno pokrenuti " "računalo?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Suspenzija" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hibernacija" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Ponovno pokretanje..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Velika slova" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Otkaži" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/bg.po0000664000175000017500000000641413253544112020733 0ustar00bluesabrebluesabre00000000000000# Bulgarian translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:41+0000\n" "Last-Translator: Svetoslav Stefanov \n" "Language-Team: Bulgarian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: bg\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Рестартиране" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Сигурни ли сте, че искате да се затворят всички програми и компютърът да се " "рестартира?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Неуспех при стартиране на сесията" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Грешна парола, моля опитайте отново" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Неуспех при идентифициране" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Друг..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Приспиване" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Дълбоко заспиване" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Рестартиране..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Голям шрифт" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Висок контраст" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Отказ" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/de.po0000664000175000017500000000644213253544112020734 0ustar00bluesabrebluesabre00000000000000# German translation for lightdm # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2015-07-07 15:46+0000\n" "Last-Translator: Tobias Bannert \n" "Language-Team: German \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: de\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Neustart" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Sind Sie sicher, dass Sie alle Anwendungen schließen und einen Neustart des " "Rechners durchführen möchten?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Herunterfahren" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" "Sind Sie sicher, dass Sie alle Anwendungen schließen und den Rechner " "herunterfahren möchten?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Entsperren" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Anmelden" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Starten der Sitzung fehlgeschlagen" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Weitere" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Gastsitzung" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Falsches Passwort, bitte wiederholen" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Legitimierung fehlgeschlagen" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Weitere …" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Bereitschaft" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Ruhezustand" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Neustart …" #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Herunterfahren …" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Große Schrift" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Hoher Kontrast" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Bildschirmtastatur" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Abbrechen" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Bitte Ihren Benutzernamen eingeben" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Bitte Ihr Passwort eingeben" lightdm-gtk-greeter-2.0.5/po/nb.po0000664000175000017500000000601113253544112020733 0ustar00bluesabrebluesabre00000000000000# Norwegian Bokmal translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:42+0000\n" "Last-Translator: Kjetil Birkeland Moe \n" "Language-Team: Norwegian Bokmal \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: nb\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Start på nytt" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Er du sikker på at du vil lukke alle programmer og starte datamaskinen på " "nytt?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Klarte ikke å starte økten" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Ugyldig passord, prøv igjen" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Klarte ikke å autentisere" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Hvilemodus" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Dvalemodus" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Omstart..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Stor skrift" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Høy kontrast" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Avbryt" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/bo.gmo0000664000175000017500000000070213253544623021110 0ustar00bluesabrebluesabre00000000000000$,89Project-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2012-03-19 16:01+0000 Last-Translator: FULL NAME Language-Team: Tibetan MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=1; plural=0; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: bo lightdm-gtk-greeter-2.0.5/po/lb.po0000664000175000017500000000603713253544112020741 0ustar00bluesabrebluesabre00000000000000# Luxembourgish translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:39+0000\n" "Last-Translator: Edson \n" "Language-Team: Luxembourgish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: \n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Nei starten" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Sidd Dir sécher, dass Dir all Programmer zoumaachen an de Computer nei " "starte wëllt?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Sessiounstart feelgeschloen" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Falscht Passwuert, probéiert nees w.e.g." #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Authentifikatioun feelgeschloen" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Aner..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Schlofmodus" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Wanterschlof" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Nei starten..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Grouss Schrëft" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Héije Kontrast" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Ofbriechen" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/lb.gmo0000664000175000017500000000232313253544623021106 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  V 1 MZ)j    Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:39+0000 Last-Translator: Edson Language-Team: Luxembourgish MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: Sidd Dir sécher, dass Dir all Programmer zoumaachen an de Computer nei starte wëllt?OfbriechenAuthentifikatioun feelgeschloenSessiounstart feelgeschloenWanterschlofHéije KontrastFalscht Passwuert, probéiert nees w.e.g.Grouss SchrëftAner...Nei startenNei starten...Schlofmoduslightdm-gtk-greeter-2.0.5/po/quot.sed0000644000175000017500000000023113243246351021460 0ustar00bluesabrebluesabre00000000000000s/"\([^"]*\)"/“\1”/g s/`\([^`']*\)'/‘\1’/g s/ '\([^`']*\)' / ‘\1’ /g s/ '\([^`']*\)'$/ ‘\1’/g s/^'\([^`']*\)' /‘\1’ /g s/“”/""/g lightdm-gtk-greeter-2.0.5/po/da.gmo0000664000175000017500000000403513253544623021077 0ustar00bluesabrebluesabre00000000000000%PEQG% = K U$c     W^MDG  (BRZ]lr{  \     Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOKOn Screen KeyboardOtherOther...RestartRestart...Screen ReaderShut DownShut Down...SuspendUnlockWarning: There is still %d user logged in.Warning: There are still %d users logged in.Project-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2018-02-19 22:08+0000 Last-Translator: scootergrisen Language-Team: Danish MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: da Er du sikker på, at du vil afslutte alle programmer og genstarte computeren?Er du sikker på, du vil lukke alle programmer og slukke computeren?AnnullerIndtast din adgangskodeIndtast dit brugernavnKunne ikke godkendeOpstart af session mislykkedesGæstesessionDvaleHøj kontrastForkert adgangskode, prøv venligst igenStor skrifttypeLog indOKSkærmtastaturAndenAnden...GenstartGenstart...SkærmoplæserLuk nedLuk ned...HvileLås opAdvarsel: Der er stadig %d bruger logget ind.Advarsel: Der er stadig %d brugere logget ind.lightdm-gtk-greeter-2.0.5/po/pt.gmo0000664000175000017500000000345213253544623021140 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  P:K"-H]f2u           Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2014-03-18 10:16+0000 Last-Translator: David Pires Language-Team: Portuguese MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: pt Tem a certeza que deseja fechar todos os programas e reinicializar o computador?Tem a certeza que deseja fechar todos os programas e desligar o computador?CancelarIntroduza a sua senhaIntroduza o seu nome de utilizadorFalha ao autenticarFalha ao iniciar a sessãoSessão de convidadoHibernarAlto ContrastePalavra passe incorreta, por favor tente novamenteFonte GrandeIniciar sessãoTeclado no ecrãOutro(s)Outro...ReiniciarReiniciar...EncerrarEncerrar...SuspenderDesbloquearlightdm-gtk-greeter-2.0.5/po/sl.gmo0000664000175000017500000000354713253544623021140 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  TuN #7Vm  !  "4 ;F_     Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2015-08-19 13:08+0000 Last-Translator: Dražen Matešić Language-Team: Slovenian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=4; plural=(n%100==1 ? 1 : n%100==2 ? 2 : n%100==3 || n%100==4 ? 3 : 0); X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: sl Ali ste prepričani, da želite zapreti vse programe in ponovno zagnati računalnik?Ali ste prepričani, da želite zapreti vse programe in izklopiti računalnik?PrekličiVnesite svoje gesloVnesite svoje uporabniško imeOveritev je spodletelaZačenjanje seje je spodleteloSeja za gosteV mirovanjeVisok kontrastNepravilno geslo, poskusite znovaVelika pisavaPrijavaZaslonska tipkovnicaDrugoDrugo ...Ponovno zaženiPonovni zagon ...IzklopIzklop ...V stanje pripravljenostiOdklenilightdm-gtk-greeter-2.0.5/po/bg.gmo0000664000175000017500000000270413253544623021104 0ustar00bluesabrebluesabre00000000000000 0E1w~  $   [2f>!AX nz  Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:41+0000 Last-Translator: Svetoslav Stefanov Language-Team: Bulgarian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: bg Сигурни ли сте, че искате да се затворят всички програми и компютърът да се рестартира?ОтказНеуспех при идентифициранеНеуспех при стартиране на сесиятаДълбоко заспиванеВисок контрастГрешна парола, моля опитайте отновоГолям шрифтДруг...РестартиранеРестартиране...Приспиванеlightdm-gtk-greeter-2.0.5/po/ia.po0000664000175000017500000000556013253544112020735 0ustar00bluesabrebluesabre00000000000000# Interlingua translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:41+0000\n" "Last-Translator: Sean Davis \n" "Language-Team: Interlingua \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: ia\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Re-initiar" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Secur que tu vole clauder tote le programmas e reinitiar le computator?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Suspender" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hibernar" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Reinitiar..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Cancellar" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/LINGUAS0000664000175000017500000000037413243241724021031 0ustar00bluesabrebluesabre00000000000000ar ast be bg bn bo br bs ca ca@valencia cs da de el en_AU en_CA en_GB eo es et eu fi fr fy gd gl he hi hr hu ia id is it ja kk km ko ku lb lt lv mhr ml ms nb nl nn oc pl pt_BR pt ro ru sd si sk sl sq sr sv ta te th tr ug uk uz vi wae zh_CN zh_HK zh_TW lightdm-gtk-greeter-2.0.5/po/zh_TW.gmo0000664000175000017500000000332413253544623021546 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  <M6 #6 =G cm t         Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2014-04-30 15:54+0000 Last-Translator: Walter Cheuk Language-Team: Chinese (Traditional) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=1; plural=0; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: 是否真的想關閉所有程式，並重新啟動電腦？是否真的想關閉所有程式，並關掉電腦？取消輸入您的密碼輸入您的使用者名稱身分核對失敗未能啟動作業階段訪客作業階段休眠高對比密碼不正確，請重試大字型登入螢幕鍵盤其他其他...重新啟動重新啟動...關機關機...暫停解除鎖定lightdm-gtk-greeter-2.0.5/po/tr.gmo0000664000175000017500000000351113253544623021136 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  [/T7 O]m'    3 >     Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2014-08-16 14:36+0000 Last-Translator: Fox Language-Team: Turkish MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: tr Tüm programları sonlandırıp bilgisayarı yeniden başlatmak istediğinize emin misiniz?Tüm programları sonlandırmak ve bilgisayarı kapatmak istediğinize emin misiniz?VazgeçParolanızı girinKullanıcı adınızı girinKimlik doğrulama başarısızOturum başlatılamadıKonuk OturumuHazırda BekletYüsek KarşıtlıkYanlış parola, lütfen tekrar deneyinBüyük Yazı TipiOturum açEkran KlavyesiDiğerDiğer...Yeniden BaşlatYeniden Başlat...Bilgisayarı KapatBilgisayarı Kapat...Askıya AlKilidi Açlightdm-gtk-greeter-2.0.5/po/sq.gmo0000664000175000017500000000233013253544623021132 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  ] 2S[4m    Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:41+0000 Last-Translator: Vilson Gjeci Language-Team: Albanian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: sq Jeni i sigurtë që dëshironi t'i mbyllni të gjitha programet dhe të rindizni kompjuterin?AnulloDështova në identifikimDështova në nisjen e seksionitHibernoKontrast i LartëFjalëkalim i gabuar, ju lutemi ta provoni përsëriGërma të MëdhaTjetër...RindizRindiz...Pezullolightdm-gtk-greeter-2.0.5/po/boldquot.sed0000644000175000017500000000033113243246351022322 0ustar00bluesabrebluesabre00000000000000s/"\([^"]*\)"/“\1”/g s/`\([^`']*\)'/‘\1’/g s/ '\([^`']*\)' / ‘\1’ /g s/ '\([^`']*\)'$/ ‘\1’/g s/^'\([^`']*\)' /‘\1’ /g s/“”/""/g s/“/“/g s/”/”/g s/‘/‘/g s/’/’/g lightdm-gtk-greeter-2.0.5/po/en_GB.gmo0000664000175000017500000000401113253544623021457 0ustar00bluesabrebluesabre00000000000000%PEQG% = K U$c     W^EGB   $ 3>EH[aj r }  W     Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOKOn Screen KeyboardOtherOther...RestartRestart...Screen ReaderShut DownShut Down...SuspendUnlockWarning: There is still %d user logged in.Warning: There are still %d users logged in.Project-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2018-03-08 01:10+0000 Last-Translator: Andi Chandler Language-Team: English (United Kingdom) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOKOn Screen KeyboardOtherOther...RestartRestart...Screen ReaderShut DownShut Down...SuspendUnlockWarning: There is still %d user logged in.Warning: There are still %d users logged in.lightdm-gtk-greeter-2.0.5/po/lt.gmo0000664000175000017500000000433413253544623021134 0ustar00bluesabrebluesabre00000000000000%PEQG% = K U$c     W^M,Cz 6 FQ.d    ) 5?     Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOKOn Screen KeyboardOtherOther...RestartRestart...Screen ReaderShut DownShut Down...SuspendUnlockWarning: There is still %d user logged in.Warning: There are still %d users logged in.Project-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2018-03-05 10:19+0000 Last-Translator: Moo Language-Team: Lithuanian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && (n%100<10 || n%100>=20) ? 1 : 2; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: lt Ar tikrai norite išjungti visas programas ir paleisti kompiuterį iš naujo?Ar tikrai norite užverti visas programas ir išjungti kompiuterį?AtsisakytiĮrašykite slaptažodįĮrašykite naudotojo vardąNepavyko nustatyti tapatybėsNepavyko paleisti seansoSvečio seansasUžmigdytiDidelis kontrastasNeteisingas slaptažodis, bandykite dar kartąDidelis šriftasPrisijungtiGeraiKlaviatūra ekraneKitaKitas...Paleisti iš naujoPaleisti iš naujo...Ekrano skaityklėIšjungtiIšjungti...PristabdytiAtrakintiĮspėjimas: Yra vis dar prisijungęs %d naudotojas.Įspėjimas: Yra vis dar prisijungę %d naudotojai.Įspėjimas: Yra vis dar prisijungę %d naudotojų.lightdm-gtk-greeter-2.0.5/po/br.po0000664000175000017500000000634313253544112020747 0ustar00bluesabrebluesabre00000000000000# Breton translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2015-04-06 05:30+0000\n" "Last-Translator: Denis \n" "Language-Team: Breton \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: br\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Adloc'hañ" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Ha fellout a ra deoc'h serriñ an holl c'houlevioù hag adloc'hañ hoc'h " "urzhiataer ?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Lazhañ" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" "Ha fellout a ra deoc'h serriñ an holl c'houlevioù ha lazhañ hoc'h urzhiataer " "?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Dibrennañ" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Kennaskañ" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "C'hwitadenn war loc'hañ an estez" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Traoù all" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Estez ar c'houviad" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "N'eo ket mat ar ger-tremen, roit anezhañ en-dro" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "C'hwitadenn war an dilesa" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "All..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Lakaat da gousket" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Goañviñ" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Adloc'hañ..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Lazhañ..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Nodrezh bras" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Dargemm uhel" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Klavier war ar skramm" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Nullañ" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Bizskrivit hoc'h anv arveriad" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Bizskrivit ho ker-tremen" lightdm-gtk-greeter-2.0.5/po/en_CA.gmo0000664000175000017500000000223213253544623021455 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  E . 8$F kv   Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:39+0000 Last-Translator: Lionel Le Folgoc Language-Team: English (Canada) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...Suspendlightdm-gtk-greeter-2.0.5/po/lv.po0000664000175000017500000000602313253544112020760 0ustar00bluesabrebluesabre00000000000000# Latvian translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:41+0000\n" "Last-Translator: Lionel Le Folgoc \n" "Language-Team: Latvian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n != 0 ? 1 : 2;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: lv\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Pārstartēt" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "Vai tiešām vēlaties aizvērt visas programmas un pārstartēt datoru?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Neizdevās startēt sesiju" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Nepareiza parole, mēģiniet vēlreiz" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Neizdevās autentificēties" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Cits..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Iesnaudināt" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Iemidzināt" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Pārstartēt..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Liels fonts" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Augsta kontrasta" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Atcelt" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/sl.po0000664000175000017500000000642713253544112020765 0ustar00bluesabrebluesabre00000000000000# Slovenian translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2015-08-19 13:08+0000\n" "Last-Translator: Dražen Matešić \n" "Language-Team: Slovenian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=4; plural=(n%100==1 ? 1 : n%100==2 ? 2 : n%100==3 || " "n%100==4 ? 3 : 0);\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: sl\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Ponovno zaženi" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Ali ste prepričani, da želite zapreti vse programe in ponovno zagnati " "računalnik?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Izklop" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" "Ali ste prepričani, da želite zapreti vse programe in izklopiti računalnik?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Odkleni" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Prijava" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Začenjanje seje je spodletelo" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Drugo" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Seja za goste" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Nepravilno geslo, poskusite znova" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Overitev je spodletela" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Drugo ..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "V stanje pripravljenosti" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "V mirovanje" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Ponovni zagon ..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Izklop ..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Velika pisava" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Visok kontrast" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Zaslonska tipkovnica" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Prekliči" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Vnesite svoje uporabniško ime" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Vnesite svoje geslo" lightdm-gtk-greeter-2.0.5/po/te.po0000664000175000017500000000671013253544112020752 0ustar00bluesabrebluesabre00000000000000# Telugu translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:39+0000\n" "Last-Translator: Praveen Illa \n" "Language-Team: Telugu \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: te\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "పునఃప్రారంభించు" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "మీరు ఖచ్ఛితంగా అన్ని ప్రోగ్రాములను మూసివేసి కంప్యూటర్‌ని " "పునఃప్రారంభించాలనుకుంటున్నారా?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "సంకేతపదం తప్పు, దయచేసి మరలా ప్రయత్నించండి" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "ధృవీకరణ విఫలమైంది" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "తాత్కాలికంగా నిలిపివేయి" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "సుప్తావస్థ" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "పునఃప్రారంభించు..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "పెద్ద ఫాంటు" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "అధిక వర్ణ వ్యత్యాసము" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "రద్దుచేయి" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/gd.gmo0000664000175000017500000000256513253544623021113 0ustar00bluesabrebluesabre00000000000000HEI  $   )18g nz0-* 2@Q`   Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2014-09-10 14:42+0000 Last-Translator: GunChleoc Language-Team: Gaelic; Scottish MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=4; plural=(n==1 || n==11) ? 0 : (n==2 || n==12) ? 1 : (n > 2 && n < 20) ? 2 : 3; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: A bheil thu cinnteach gu bheil thu airson gach prògram a dhùnadh is an coimpiutair ath-thòiseachadh?Sguir dhethDh'fhàillig an dearbhadhCha b' urrainn dhuinn an seisean a thòiseachadhDèan cadal-geamhraidhIomsgaradh àrdTha am facal-faire cearr, feuch ris a-rithistCruth-clò mòrEile...Ath-thòisichAth-thòisich...Cuir dàil annThoir a' ghlas dhethlightdm-gtk-greeter-2.0.5/po/zh_CN.po0000664000175000017500000000566113253544112021347 0ustar00bluesabrebluesabre00000000000000# Chinese (Simplified) translation for lightdm # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:39+0000\n" "Last-Translator: 朱涛 \n" "Language-Team: Chinese (Simplified) \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: \n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "重启" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "您确定要关闭所有程序并重新启动计算机？" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "启动会话失败" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "密码不正确，请重试" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "认证失败" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "待机" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "休眠" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "重启..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "大字体" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "高对比度" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "取消" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/vi.gmo0000664000175000017500000000234613253544623021134 0ustar00bluesabrebluesabre00000000000000 | E!gn  $  ^ . GT+m   Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontRestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:42+0000 Last-Translator: Trung Ngô Language-Team: Vietnamese MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=1; plural=0; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: vi Bạn có chắc muốn đóng tất cả chương trình và khởi động lại máy tính?Hủy bỏKhông thể xác thựcKhông thể khởi động phiên làm việcNgủ đôngĐộ tương phản caoSai mật khẩu, xin vui lòng thử lạiPhông chữ lớnKhởi động lạiKhởi động lại...Tạm ngưnglightdm-gtk-greeter-2.0.5/po/vi.po0000664000175000017500000000610313253544112020754 0ustar00bluesabrebluesabre00000000000000# Vietnamese translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:42+0000\n" "Last-Translator: Trung Ngô \n" "Language-Team: Vietnamese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: vi\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Khởi động lại" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "Bạn có chắc muốn đóng tất cả chương trình và khởi động lại máy tính?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Không thể khởi động phiên làm việc" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Sai mật khẩu, xin vui lòng thử lại" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Không thể xác thực" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Tạm ngưng" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Ngủ đông" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Khởi động lại..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Phông chữ lớn" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Độ tương phản cao" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Hủy bỏ" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/sr.gmo0000664000175000017500000000306713253544623021143 0ustar00bluesabrebluesabre00000000000000 0E1w~  $  " >8APIn"&  Are you sure you want to close all programs and restart the computer?CancelFailed to authenticateFailed to start sessionHibernateHigh ContrastIncorrect password, please try againLarge FontOther...RestartRestart...SuspendProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:39+0000 Last-Translator: Мирослав Николић Language-Team: Launchpad Serbian Translators MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: sr Да ли сте сигурни да желите да затворите све програме и да поново покренете рачунар?ОткажиНисам успео да потврдим идентитетНисам успео да покренем сесијуЗамрзниВелики контрастНеисправна лозинка, молим пробајте опетВећи словни ликовиОстали...Поново покрениПоново покрени...Обуставиlightdm-gtk-greeter-2.0.5/po/ug.po0000664000175000017500000000621013253544112020750 0ustar00bluesabrebluesabre00000000000000# Uyghur translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:41+0000\n" "Last-Translator: Lionel Le Folgoc \n" "Language-Team: Uyghur \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: \n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "قايتا قوزغات" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "ھەممە پروگراممىنى ئېتىپ كومپيۇتېرنى قايتا قوزغامسىز؟" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "ئەڭگىمەنى باشلاش مەغلۇپ بولدى" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "ئىم خاتا، قايتا سىناڭ" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "سالاھىيەت دەلىللەش مەغلۇپ بولدى" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "باشقا…" #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "توڭلات" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "ئۈچەك" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "قايتا قوزغات…" #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "چوڭ خەت نۇسخىسى" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "يۇقىرى ئاق-قارىلىقى" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "ۋاز كەچ" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/sq.po0000664000175000017500000000603713253544112020767 0ustar00bluesabrebluesabre00000000000000# Albanian translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2013-05-08 06:41+0000\n" "Last-Translator: Vilson Gjeci \n" "Language-Team: Albanian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: sq\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Rindiz" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Jeni i sigurtë që dëshironi t'i mbyllni të gjitha programet dhe të rindizni " "kompjuterin?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Dështova në nisjen e seksionit" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Fjalëkalim i gabuar, ju lutemi ta provoni përsëri" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Dështova në identifikim" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Tjetër..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Pezullo" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hiberno" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Rindiz..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Gërma të Mëdha" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Kontrast i Lartë" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Anullo" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "" lightdm-gtk-greeter-2.0.5/po/tr.po0000664000175000017500000000636713253544112020777 0ustar00bluesabrebluesabre00000000000000# Turkish translation for lightdm # Copyright (c) 2010 Rosetta Contributors and Canonical Ltd 2010 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2010. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2014-08-16 14:36+0000\n" "Last-Translator: Fox \n" "Language-Team: Turkish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: tr\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Yeniden Başlat" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Tüm programları sonlandırıp bilgisayarı yeniden başlatmak istediğinize emin " "misiniz?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Bilgisayarı Kapat" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "" "Tüm programları sonlandırmak ve bilgisayarı kapatmak istediğinize emin " "misiniz?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Kilidi Aç" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Oturum aç" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Oturum başlatılamadı" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Diğer" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Konuk Oturumu" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Yanlış parola, lütfen tekrar deneyin" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Kimlik doğrulama başarısız" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Diğer..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Askıya Al" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Hazırda Beklet" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Yeniden Başlat..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Bilgisayarı Kapat..." #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Büyük Yazı Tipi" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Yüsek Karşıtlık" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Ekran Klavyesi" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Vazgeç" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Kullanıcı adınızı girin" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Parolanızı girin" lightdm-gtk-greeter-2.0.5/po/ml.gmo0000664000175000017500000000151113253544623021117 0ustar00bluesabrebluesabre00000000000000L | yS *CancelFailed to start sessionHibernateLarge FontRestart...Project-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2013-05-08 06:39+0000 Last-Translator: Lionel Le Folgoc Language-Team: Malayalam MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: ml വേണ്ടസെഷന്‍ തുടങ്ങാന്‍ പരാജയപെട്ടുശിശിര നിദ്രവലിയ ഫോണ്ട്പുനരാരംഭിക്കുകlightdm-gtk-greeter-2.0.5/po/gl.gmo0000664000175000017500000000344513253544623021121 0ustar00bluesabrebluesabre00000000000000E GO   $ @KRekt |  M8@!('Pen'}          Are you sure you want to close all programs and restart the computer?Are you sure you want to close all programs and shut down the computer?CancelEnter your passwordEnter your usernameFailed to authenticateFailed to start sessionGuest SessionHibernateHigh ContrastIncorrect password, please try againLarge FontLog InOn Screen KeyboardOtherOther...RestartRestart...Shut DownShut Down...SuspendUnlockProject-Id-Version: lightdm Report-Msgid-Bugs-To: PO-Revision-Date: 2017-09-16 19:22+0000 Last-Translator: Marcos Lans Language-Team: Galician MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2018-03-18 05:30+0000 X-Generator: Launchpad (build 18571) Language: gl Ten certeza de que desexa pechar todos os programas e reiniciar o computador?Está seguro de pechar todos os programas e apagar o computador?CancelarInsira o seu contrasinalIntroduza o nome de usuarioProduciuse un fallo ao autenticarProduciuse un fallo ao iniciar a sesiónSesión de convidadoHibernarContraste altoContrasinal incorrecto, ténteo de novoLetras grandesIniciar sesiónTeclado na pantallaOutroOutro...ReiniciarReiniciar...ApagarApagar...SuspenderDesbloquearlightdm-gtk-greeter-2.0.5/po/be.po0000664000175000017500000000723613253544112020734 0ustar00bluesabrebluesabre00000000000000# Belarusian translation for lightdm # Copyright (c) 2011 Rosetta Contributors and Canonical Ltd 2011 # This file is distributed under the same license as the lightdm package. # FIRST AUTHOR , 2011. # msgid "" msgstr "" "Project-Id-Version: lightdm\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-17 05:29+0000\n" "PO-Revision-Date: 2014-03-16 10:11+0000\n" "Last-Translator: Andrew P. \n" "Language-Team: Belarusian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && " "n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" "X-Launchpad-Export-Date: 2018-03-18 05:30+0000\n" "X-Generator: Launchpad (build 18571)\n" "Language: be\n" #: ../src/lightdm-gtk-greeter.c:525 #, c-format msgid "Warning: There is still %d user logged in." msgid_plural "Warning: There are still %d users logged in." msgstr[0] "" msgstr[1] "" #: ../src/lightdm-gtk-greeter.c:1924 msgid "Restart" msgstr "Перазапусціць" #: ../src/lightdm-gtk-greeter.c:1925 msgid "Are you sure you want to close all programs and restart the computer?" msgstr "" "Вы ўпэўнены што хочаце зачыніць усе праграмы і перазапусціць кампутар?" #: ../src/lightdm-gtk-greeter.c:1933 msgid "Shut Down" msgstr "Выключыць" #: ../src/lightdm-gtk-greeter.c:1934 msgid "" "Are you sure you want to close all programs and shut down the computer?" msgstr "Вы сапраўды жадаеце зачыніць усе праграмы і выключыць кампутар?" #: ../src/lightdm-gtk-greeter.c:1948 msgid "Unlock" msgstr "Разблакаваць" #: ../src/lightdm-gtk-greeter.c:1950 ../src/lightdm-gtk-greeter.glade.h:13 msgid "Log In" msgstr "Увайсці" #: ../src/lightdm-gtk-greeter.c:2139 msgid "Failed to start session" msgstr "Не атрымалася запусціць сэсію" #: ../src/lightdm-gtk-greeter.c:2269 msgid "Other" msgstr "Іншыя" #: ../src/lightdm-gtk-greeter.c:2286 ../src/lightdm-gtk-greeter.c:2623 msgid "Guest Session" msgstr "Гасцявая сесія" #: ../src/lightdm-gtk-greeter.c:2500 msgid "Incorrect password, please try again" msgstr "Няправільны пароль, паспрабуйце ўвесці яшчэ раз" #: ../src/lightdm-gtk-greeter.c:2507 msgid "Failed to authenticate" msgstr "Памылка аўтэнтыфікацыі" #: ../src/lightdm-gtk-greeter.c:2631 msgid "Other..." msgstr "Iншыя..." #: ../src/lightdm-gtk-greeter.glade.h:1 msgid "Suspend" msgstr "Рэжым чакання" #: ../src/lightdm-gtk-greeter.glade.h:2 msgid "Hibernate" msgstr "Гібернацыя" #: ../src/lightdm-gtk-greeter.glade.h:3 msgid "Restart..." msgstr "Перазагрузіць ..." #: ../src/lightdm-gtk-greeter.glade.h:4 msgid "Shut Down..." msgstr "Выключыць…" #: ../src/lightdm-gtk-greeter.glade.h:5 msgid "Large Font" msgstr "Буйны шрыфт" #: ../src/lightdm-gtk-greeter.glade.h:6 msgid "High Contrast" msgstr "Высокая кантраснасць" #: ../src/lightdm-gtk-greeter.glade.h:7 msgid "On Screen Keyboard" msgstr "Экранная клавіятура" #: ../src/lightdm-gtk-greeter.glade.h:8 msgid "Screen Reader" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:9 msgid "Cancel" msgstr "Адмяніць" #: ../src/lightdm-gtk-greeter.glade.h:10 msgid "OK" msgstr "" #: ../src/lightdm-gtk-greeter.glade.h:11 msgid "Enter your username" msgstr "Увядзіце сваё імя" #: ../src/lightdm-gtk-greeter.glade.h:12 msgid "Enter your password" msgstr "Увядзіце свой пароль" lightdm-gtk-greeter-2.0.5/po/stamp-po0000644000175000017500000000001213251223303021442 0ustar00bluesabrebluesabre00000000000000timestamp lightdm-gtk-greeter-2.0.5/config.rpath0000755000175000017500000004421613243246351021700 0ustar00bluesabrebluesabre00000000000000#! /bin/sh # Output a system dependent set of variables, describing how to set the # run time search path of shared libraries in an executable. # # Copyright 1996-2015 Free Software Foundation, Inc. # Taken from GNU libtool, 2001 # Originally by Gordon Matzigkeit , 1996 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # # The first argument passed to this file is the canonical host specification, # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld # should be set by the caller. # # The set of defined variables is at the end of this script. # Known limitations: # - On IRIX 6.5 with CC="cc", the run time search patch must not be longer # than 256 bytes, otherwise the compiler driver will dump core. The only # known workaround is to choose shorter directory names for the build # directory and/or the installation directory. # All known linkers require a '.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a shrext=.so host="$1" host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` # Code taken from libtool.m4's _LT_CC_BASENAME. for cc_temp in $CC""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` # Code taken from libtool.m4's _LT_COMPILER_PIC. wl= if test "$GCC" = yes; then wl='-Wl,' else case "$host_os" in aix*) wl='-Wl,' ;; mingw* | cygwin* | pw32* | os2* | cegcc*) ;; hpux9* | hpux10* | hpux11*) wl='-Wl,' ;; irix5* | irix6* | nonstopux*) wl='-Wl,' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in ecc*) wl='-Wl,' ;; icc* | ifort*) wl='-Wl,' ;; lf95*) wl='-Wl,' ;; nagfor*) wl='-Wl,-Wl,,' ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) wl='-Wl,' ;; ccc*) wl='-Wl,' ;; xl* | bgxl* | bgf* | mpixl*) wl='-Wl,' ;; como) wl='-lopt=' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ F* | *Sun*Fortran*) wl= ;; *Sun\ C*) wl='-Wl,' ;; esac ;; esac ;; newsos6) ;; *nto* | *qnx*) ;; osf3* | osf4* | osf5*) wl='-Wl,' ;; rdos*) ;; solaris*) case $cc_basename in f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) wl='-Qoption ld ' ;; *) wl='-Wl,' ;; esac ;; sunos4*) wl='-Qoption ld ' ;; sysv4 | sysv4.2uw2* | sysv4.3*) wl='-Wl,' ;; sysv4*MP*) ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) wl='-Wl,' ;; unicos*) wl='-Wl,' ;; uts4*) ;; esac fi # Code taken from libtool.m4's _LT_LINKER_SHLIBS. hardcode_libdir_flag_spec= hardcode_libdir_separator= hardcode_direct=no hardcode_minus_L=no case "$host_os" in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; esac ld_shlibs=yes if test "$with_gnu_ld" = yes; then # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. # Unlike libtool, we use -rpath here, not --rpath, since the documented # option of GNU ld is called -rpath, not --rpath. hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' case "$host_os" in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs=no fi ;; amigaos*) case "$host_cpu" in powerpc) ;; m68k) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then : else ld_shlibs=no fi ;; haiku*) ;; interix[3-9]*) hardcode_direct=no hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; netbsd*) ;; solaris*) if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ld_shlibs=no elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs=no ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' else ld_shlibs=no fi ;; esac ;; sunos4*) hardcode_direct=yes ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = no; then hardcode_libdir_flag_spec= fi else case "$host_os" in aix3*) # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac fi hardcode_direct=yes hardcode_libdir_separator=':' if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct=unsupported hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi ;; esac fi # Begin _LT_AC_SYS_LIBPATH_AIX. echo 'int main () { return 0; }' > conftest.c ${CC} ${LDFLAGS} conftest.c -o conftest aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } }'` if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } }'` fi if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib" fi rm -f conftest.c conftest # End _LT_AC_SYS_LIBPATH_AIX. if test "$aix_use_runtimelinking" = yes; then hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' else hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" fi fi ;; amigaos*) case "$host_cpu" in powerpc) ;; m68k) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; bsdi[45]*) ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec=' ' libext=lib ;; darwin* | rhapsody*) hardcode_direct=no if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then : else ld_shlibs=no fi ;; dgux*) hardcode_libdir_flag_spec='-L$libdir' ;; freebsd2.[01]*) hardcode_direct=yes hardcode_minus_L=yes ;; freebsd* | dragonfly*) hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes ;; hpux9*) hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; hpux10*) if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes fi ;; hpux11*) if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: case $host_cpu in hppa*64*|ia64*) hardcode_direct=no ;; *) hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; netbsd*) hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes ;; newsos6) hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then hardcode_libdir_flag_spec='${wl}-rpath,$libdir' else case "$host_os" in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) hardcode_libdir_flag_spec='-R$libdir' ;; *) hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi else ld_shlibs=no fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; osf3*) hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) if test "$GCC" = yes; then hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else # Both cc and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi hardcode_libdir_separator=: ;; solaris*) hardcode_libdir_flag_spec='-R$libdir' ;; sunos4*) hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes ;; sysv4) case $host_vendor in sni) hardcode_direct=yes # is this really true??? ;; siemens) hardcode_direct=no ;; motorola) hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac ;; sysv4.3*) ;; sysv4*MP*) if test -d /usr/nec; then ld_shlibs=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) ;; sysv5* | sco3.2v5* | sco5v6*) hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' hardcode_libdir_separator=':' ;; uts4*) hardcode_libdir_flag_spec='-L$libdir' ;; *) ld_shlibs=no ;; esac fi # Check dynamic linker characteristics # Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER. # Unlike libtool.m4, here we don't care about _all_ names of the library, but # only about the one the linker finds when passed -lNAME. This is the last # element of library_names_spec in libtool.m4, or possibly two of them if the # linker has special search rules. library_names_spec= # the last element of library_names_spec in libtool.m4 libname_spec='lib$name' case "$host_os" in aix3*) library_names_spec='$libname.a' ;; aix[4-9]*) library_names_spec='$libname$shrext' ;; amigaos*) case "$host_cpu" in powerpc*) library_names_spec='$libname$shrext' ;; m68k) library_names_spec='$libname.a' ;; esac ;; beos*) library_names_spec='$libname$shrext' ;; bsdi[45]*) library_names_spec='$libname$shrext' ;; cygwin* | mingw* | pw32* | cegcc*) shrext=.dll library_names_spec='$libname.dll.a $libname.lib' ;; darwin* | rhapsody*) shrext=.dylib library_names_spec='$libname$shrext' ;; dgux*) library_names_spec='$libname$shrext' ;; freebsd[23].*) library_names_spec='$libname$shrext$versuffix' ;; freebsd* | dragonfly*) library_names_spec='$libname$shrext' ;; gnu*) library_names_spec='$libname$shrext' ;; haiku*) library_names_spec='$libname$shrext' ;; hpux9* | hpux10* | hpux11*) case $host_cpu in ia64*) shrext=.so ;; hppa*64*) shrext=.sl ;; *) shrext=.sl ;; esac library_names_spec='$libname$shrext' ;; interix[3-9]*) library_names_spec='$libname$shrext' ;; irix5* | irix6* | nonstopux*) library_names_spec='$libname$shrext' case "$host_os" in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; *) libsuff= shlibsuff= ;; esac ;; esac ;; linux*oldld* | linux*aout* | linux*coff*) ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) library_names_spec='$libname$shrext' ;; knetbsd*-gnu) library_names_spec='$libname$shrext' ;; netbsd*) library_names_spec='$libname$shrext' ;; newsos6) library_names_spec='$libname$shrext' ;; *nto* | *qnx*) library_names_spec='$libname$shrext' ;; openbsd*) library_names_spec='$libname$shrext$versuffix' ;; os2*) libname_spec='$name' shrext=.dll library_names_spec='$libname.a' ;; osf3* | osf4* | osf5*) library_names_spec='$libname$shrext' ;; rdos*) ;; solaris*) library_names_spec='$libname$shrext' ;; sunos4*) library_names_spec='$libname$shrext$versuffix' ;; sysv4 | sysv4.3*) library_names_spec='$libname$shrext' ;; sysv4*MP*) library_names_spec='$libname$shrext' ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) library_names_spec='$libname$shrext' ;; tpf*) library_names_spec='$libname$shrext' ;; uts4*) library_names_spec='$libname$shrext' ;; esac sed_quote_subst='s/\(["`$\\]\)/\\\1/g' escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` shlibext=`echo "$shrext" | sed -e 's,^\.,,'` escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <